make update

Submitted by: Hanno Böck <hanno@hboeck.de>
Approved by: steve@openssl.org

Create engines dir if it doesn't already exist.

.cvsignore

@@ -1,4 +1,6 @@
 openssl.pc
+libcrypto.pc
+libssl.pc
 MINFO
 makefile.one
 tmp
@@ -11,8 +13,10 @@ maketest.log
 cctest
 cctest.c
 cctest.a
-libcrypto.so.*
-libssl.so.*
 *.flc
 semantic.cache
 Makefile
+*.dll*
+*.so*
+*.sl*
+*.dylib*

CHANGES.SSLeay

@@ -148,7 +148,7 @@ eric (about to go bushwalking for the 4 day easter break :-)
       This would tend to cause memory overwrites since SSLv3 has
       a maximum packet size of 16k.  If your program uses
       buffers <= 16k, you would probably never see this problem.
-    - Fixed a new errors that were cause by malloc() not returning
+    - Fixed a few errors that were cause by malloc() not returning
       0 initialised memory..
     - SSL_OP_NETSCAPE_CA_DN_BUG was being switched on when using
       SSL_CTX_set_options(ssl_ctx,SSL_OP_ALL); which was a bad thing

ChangeLog.0_9_7-stable_not-in-head

@@ -1,163 +0,0 @@
-This file, together with ChangeLog.0_9_7-stable_not-in-head_FIPS,
-provides a collection of those CVS change log entries for the
-0.9.7 branch (OpenSSL_0_9_7-stable) that do not appear similarly in
-0.9.8-dev (CVS head).
-    
-ChangeLog.0_9_7-stable_not-in-head_FIPS  -  "FIPS" related changes
-ChangeLog.0_9_7-stable_not-in-head       -  everything else
-
-Some obvious false positives have been eliminated: e.g., we do not
-care about a simple "make update"; and we don't care about changes
-identified to the 0.9.7 branch that were explicitly identified as
-backports from head.
-    
-Eliminating all other entries (and finally this file and its
-compantion), either as false positives or as things that should go
-into 0.9.8, remains to be done.  Any additional changes to 0.9.7 that
-are not immediately put into 0.9.8, but belong there as well, should
-be added to the end of this file.
-
-
-2002-11-04 17:33  levitte
-
-	Changed:
-		Configure (1.314.2.38), "Exp", lines: +4 -2
-
-	Return my normal debug targets to something not so extreme, and
-	make the extreme ones special (or 'extreme', if you will :-)).
-
-2002-12-16 19:17  appro
-
-	Changed:
-		crypto/bn/bn_lcl.h (1.23.2.3), "Exp", lines: +3 -0
-		crypto/bn/bn_mul.c (1.28.2.4), "Exp", lines: +84 -445
-
-	This is rollback to 0.9.6h bn_mul.c to address problem reported in
-	RT#272.
-
-2003-07-27 15:46  ben
-
-	Changed:
-		crypto/aes/aes.h (1.1.2.5), "Exp", lines: +3 -0
-		crypto/aes/aes_cfb.c (1.1.2.4), "Exp", lines: +57 -0
-
-	Add untested CFB-r mode. Will be tested soon.
-
-2003-07-28 17:07  ben
-
-	Changed:
-		Makefile.org (1.154.2.69), "Exp", lines: +5 -1
-		crypto/aes/aes.h (1.1.2.6), "Exp", lines: +3 -0
-		crypto/aes/aes_cfb.c (1.1.2.5), "Exp", lines: +19 -0
-		crypto/dsa/Makefile.ssl (1.49.2.6), "Exp", lines: +3 -2
-		crypto/err/Makefile.ssl (1.48.2.4), "Exp", lines: +17 -16
-		crypto/evp/e_aes.c (1.6.2.5), "Exp", lines: +8 -0
-		crypto/evp/e_des.c (1.5.2.2), "Exp", lines: +1 -1
-		crypto/evp/e_des3.c (1.8.2.3), "Exp", lines: +2 -2
-		crypto/evp/evp.h (1.86.2.11), "Exp", lines: +28 -11
-		crypto/evp/evp_locl.h (1.7.2.3), "Exp", lines: +2 -2
-		crypto/objects/obj_dat.h (1.49.2.13), "Exp", lines: +10 -5
-		crypto/objects/obj_mac.h (1.19.2.13), "Exp", lines: +5 -0
-		crypto/objects/obj_mac.num (1.15.2.9), "Exp", lines: +1 -0
-		crypto/objects/objects.txt (1.20.2.14), "Exp", lines: +4 -0
-		fips/Makefile.ssl (1.1.2.3), "Exp", lines: +7 -0
-		fips/aes/Makefile.ssl (1.1.2.2), "Exp", lines: +23 -1
-		fips/aes/fips_aesavs.c (1.1.2.3), "Exp", lines: +9 -1
-		test/Makefile.ssl (1.84.2.30), "Exp", lines: +101 -43
-
-	Add support for partial CFB modes, make tests work, update
-	dependencies.
-
-2003-07-29 12:56  ben
-
-	Changed:
-		crypto/aes/aes_cfb.c (1.1.2.6), "Exp", lines: +9 -6
-		crypto/evp/c_allc.c (1.8.2.3), "Exp", lines: +1 -0
-		crypto/evp/evp_test.c (1.14.2.11), "Exp", lines: +17 -8
-		crypto/evp/evptests.txt (1.9.2.2), "Exp", lines: +48 -1
-
-	Working CFB1 and test vectors.
-
-2003-07-29 15:24  ben
-
-	Changed:
-		crypto/evp/e_aes.c (1.6.2.6), "Exp", lines: +14 -0
-		crypto/objects/obj_dat.h (1.49.2.14), "Exp", lines: +15 -5
-		crypto/objects/obj_mac.h (1.19.2.14), "Exp", lines: +10 -0
-		crypto/objects/obj_mac.num (1.15.2.10), "Exp", lines: +2 -0
-		crypto/objects/objects.txt (1.20.2.15), "Exp", lines: +2 -0
-		fips/aes/Makefile.ssl (1.1.2.3), "Exp", lines: +1 -1
-		fips/aes/fips_aesavs.c (1.1.2.4), "Exp", lines: +34 -19
-
-	The rest of the keysizes for CFB1, working AES AVS test for CFB1.
-
-2003-07-29 19:05  ben
-
-	Changed:
-		crypto/aes/aes.h (1.1.2.7), "Exp", lines: +3 -0
-		crypto/aes/aes_cfb.c (1.1.2.7), "Exp", lines: +14 -0
-		crypto/evp/c_allc.c (1.8.2.4), "Exp", lines: +1 -0
-		crypto/evp/e_aes.c (1.6.2.7), "Exp", lines: +4 -9
-		crypto/evp/evptests.txt (1.9.2.3), "Exp", lines: +48 -0
-		crypto/objects/obj_dat.h (1.49.2.15), "Exp", lines: +20 -5
-		crypto/objects/obj_mac.h (1.19.2.15), "Exp", lines: +15 -0
-		crypto/objects/obj_mac.num (1.15.2.11), "Exp", lines: +3 -0
-		crypto/objects/objects.txt (1.20.2.16), "Exp", lines: +3 -0
-		fips/aes/fips_aesavs.c (1.1.2.7), "Exp", lines: +11 -0
-
-	AES CFB8.
-
-2003-07-30 20:30  ben
-
-	Changed:
-		Makefile.org (1.154.2.70), "Exp", lines: +16 -5
-		crypto/des/cfb_enc.c (1.7.2.1), "Exp", lines: +2 -1
-		crypto/des/des_enc.c (1.11.2.2), "Exp", lines: +4 -0
-		crypto/evp/e_aes.c (1.6.2.8), "Exp", lines: +7 -14
-		crypto/evp/e_des.c (1.5.2.3), "Exp", lines: +37 -1
-		crypto/evp/evp.h (1.86.2.12), "Exp", lines: +6 -0
-		crypto/evp/evp_locl.h (1.7.2.4), "Exp", lines: +9 -0
-		crypto/objects/obj_dat.h (1.49.2.16), "Exp", lines: +48 -23
-		crypto/objects/obj_mac.h (1.19.2.16), "Exp", lines: +31 -6
-		crypto/objects/obj_mac.num (1.15.2.12), "Exp", lines: +5 -0
-		crypto/objects/objects.txt (1.20.2.17), "Exp", lines: +12 -6
-		fips/Makefile.ssl (1.1.2.4), "Exp", lines: +8 -1
-		fips/fips_make_sha1 (1.1.2.3), "Exp", lines: +3 -0
-		fips/aes/Makefile.ssl (1.1.2.4), "Exp", lines: +1 -1
-		fips/des/.cvsignore (1.1.2.1), "Exp", lines: +3 -0
-		fips/des/Makefile.ssl (1.1.2.1), "Exp", lines: +96 -0
-		fips/des/fingerprint.sha1 (1.1.2.1), "Exp", lines: +2 -0
-		fips/des/fips_des_enc.c (1.1.2.1), "Exp", lines: +288 -0
-		fips/des/fips_des_locl.h (1.1.2.1), "Exp", lines: +428 -0
-		fips/des/fips_desmovs.c (1.1.2.1), "Exp", lines: +659 -0
-
-	Whoops, forgot FIPS DES, also add EVPs for DES CFB1 and 8.
-
-2003-08-01 12:25  ben
-
-	Changed:
-		crypto/des/cfb_enc.c (1.7.2.2), "Exp", lines: +45 -36
-		crypto/evp/c_allc.c (1.8.2.5), "Exp", lines: +2 -0
-		crypto/evp/e_des.c (1.5.2.4), "Exp", lines: +8 -3
-		crypto/evp/evptests.txt (1.9.2.4), "Exp", lines: +6 -0
-
-	Fix DES CFB-r.
-
-2003-08-01 12:31  ben
-
-	Changed:
-		crypto/evp/evptests.txt (1.9.2.5), "Exp", lines: +4 -0
-
-	DES CFB8 test.
-
-2005-04-19 16:21  appro
-
-	Changed:
-		Configure (1.314.2.117), "Exp", lines: +24 -21
-		Makefile.org (1.154.2.100), "Exp", lines: +1 -11
-		TABLE (1.99.2.52), "Exp", lines: +20 -20
-		apps/Makefile (1.1.4.15), "Exp", lines: +1 -1
-		test/Makefile (1.1.4.12), "Exp", lines: +1 -1
-
-	Enable shared link on HP-UX.
-

FAQ

@@ -32,6 +32,8 @@ OpenSSL  -  Frequently Asked Questions
 * How do I install a CA certificate into a browser?
 * Why is OpenSSL x509 DN output not conformant to RFC2253?
 * What is a "128 bit certificate"? Can I create one with OpenSSL?
+* Why does OpenSSL set the authority key identifier extension incorrectly?
+* How can I set up a bundle of commercial root CA certificates?
 
 [BUILD] Questions about building and testing OpenSSL
 
@@ -67,6 +69,8 @@ OpenSSL  -  Frequently Asked Questions
 * Why does compilation fail due to an undefined symbol NID_uniqueIdentifier?
 * I think I've detected a memory leak, is this a bug?
 * Why does Valgrind complain about the use of uninitialized data?
+* Why doesn't a memory BIO work when a file does?
+* Where are the declarations and implementations of d2i_X509() etc?
 
 ===============================================================================
 
@@ -75,7 +79,7 @@ OpenSSL  -  Frequently Asked Questions
 * Which is the current version of OpenSSL?
 
 The current version is available from <URL: http://www.openssl.org>.
-OpenSSL 0.9.8f was released on October 11th, 2007.
+OpenSSL 0.9.8k was released on Mar 25th, 2009.
 
 In addition to the current stable release, you can also access daily
 snapshots of the OpenSSL development version at <URL:
@@ -91,14 +95,17 @@ explains how to install this library.
 
 OpenSSL includes a command line utility that can be used to perform a
 variety of cryptographic functions.  It is described in the openssl(1)
-manpage.  Documentation for developers is currently being written.  A
-few manual pages already are available; overviews over libcrypto and
+manpage.  Documentation for developers is currently being written. Many
+manual pages are available; overviews over libcrypto and
 libssl are given in the crypto(3) and ssl(3) manpages.
 
 The OpenSSL manpages are installed in /usr/local/ssl/man/ (or a
 different directory if you specified one as described in INSTALL).
 In addition, you can read the most current versions at
-<URL: http://www.openssl.org/docs/>.
+<URL: http://www.openssl.org/docs/>. Note that the online documents refer
+to the very latest development versions of OpenSSL and may include features
+not present in released versions. If in doubt refer to the documentation
+that came with the version of OpenSSL you are using.
 
 For information on parts of libcrypto that are not yet documented, you
 might want to read Ariel Glenn's documentation on SSLeay 0.9, OpenSSL's
@@ -402,10 +409,10 @@ You can't generally create such a certificate using OpenSSL but there is no
 need to any more. Nowadays web browsers using unrestricted strong encryption
 are generally available.
 
-When there were tight export restrictions on the export of strong encryption
+When there were tight restrictions on the export of strong encryption
 software from the US only weak encryption algorithms could be freely exported
 (initially 40 bit and then 56 bit). It was widely recognised that this was
-inadequate. A relaxation the rules allowed the use of strong encryption but
+inadequate. A relaxation of the rules allowed the use of strong encryption but
 only to an authorised server.
 
 Two slighly different techniques were developed to support this, one used by
@@ -426,6 +433,39 @@ The export laws were later changed to allow almost unrestricted use of strong
 encryption so these certificates are now obsolete.
 
 
+* Why does OpenSSL set the authority key identifier (AKID) extension incorrectly?
+
+It doesn't: this extension is often the cause of confusion.
+
+Consider a certificate chain A->B->C so that A signs B and B signs C. Suppose
+certificate C contains AKID.
+
+The purpose of this extension is to identify the authority certificate B. This
+can be done either by including the subject key identifier of B or its issuer
+name and serial number.
+
+In this latter case because it is identifying certifcate B it must contain the
+issuer name and serial number of B.
+
+It is often wrongly assumed that it should contain the subject name of B. If it
+did this would be redundant information because it would duplicate the issuer
+name of C.
+
+
+* How can I set up a bundle of commercial root CA certificates?
+
+The OpenSSL software is shipped without any root CA certificate as the
+OpenSSL project does not have any policy on including or excluding
+any specific CA and does not intend to set up such a policy. Deciding
+about which CAs to support is up to application developers or
+administrators.
+
+Other projects do have other policies so you can for example extract the CA
+bundle used by Mozilla and/or modssl as described in this article:
+
+  http://www.mail-archive.com/modssl-users@modssl.org/msg16980.html
+
+
 [BUILD] =======================================================================
 
 * Why does the linker complain about undefined symbols?
@@ -681,8 +721,10 @@ file.
 
 Multi-threaded applications must provide two callback functions to
 OpenSSL by calling CRYPTO_set_locking_callback() and
-CRYPTO_set_id_callback().  This is described in the threads(3)
-manpage.
+CRYPTO_set_id_callback(), for all versions of OpenSSL up to and
+including 0.9.8[abc...]. As of version 0.9.9, CRYPTO_set_id_callback()
+and associated APIs are deprecated by CRYPTO_THREADID_set_callback()
+and friends. This is described in the threads(3) manpage.
 
 * I've compiled a program under Windows and it crashes: why?
 
@@ -823,11 +865,11 @@ code itself (the hex digits after the second colon).
 
 * Why do I get errors about unknown algorithms?
 
-This can happen under several circumstances such as reading in an
-encrypted private key or attempting to decrypt a PKCS#12 file. The cause
-is forgetting to load OpenSSL's table of algorithms with
-OpenSSL_add_all_algorithms(). See the manual page for more information.
-
+The cause is forgetting to load OpenSSL's table of algorithms with
+OpenSSL_add_all_algorithms(). See the manual page for more information. This
+can cause several problems such as being unable to read in an encrypted
+PEM file, unable to decrypt a PKCS#12 file or signature failure when
+verifying certificates.
 
 * Why can't the OpenSSH configure script detect OpenSSL?
 
@@ -905,5 +947,36 @@ OpenSSL library has been compiled with the PURIFY macro defined (-DPURIFY)
 to get rid of these warnings.
 
 
-===============================================================================
+* Why doesn't a memory BIO work when a file does?
 
+This can occur in several cases for example reading an S/MIME email message.
+The reason is that a memory BIO can do one of two things when all the data
+has been read from it.
+
+The default behaviour is to indicate that no more data is available and that
+the call should be retried, this is to allow the application to fill up the BIO
+again if necessary.
+
+Alternatively it can indicate that no more data is available and that EOF has
+been reached.
+
+If a memory BIO is to behave in the same way as a file this second behaviour
+is needed. This must be done by calling:
+
+   BIO_set_mem_eof_return(bio, 0);
+
+See the manual pages for more details.
+
+
+* Where are the declarations and implementations of d2i_X509() etc?
+
+These are defined and implemented by macros of the form:
+
+
+ DECLARE_ASN1_FUNCTIONS(X509) and IMPLEMENT_ASN1_FUNCTIONS(X509)
+
+The implementation passes an ASN1 "template" defining the structure into an
+ASN1 interpreter using generalised functions such as ASN1_item_d2i().
+
+
+===============================================================================

INSTALL

@@ -98,11 +98,17 @@
                 The crypto/<cipher> directory can be removed after running
                 "make depend".
 
-  -Dxxx, -lxxx, -Lxxx, -fxxx, -mxxx, -Kxxx These system specific options will
+  -Dxxx, -lxxx, -Lxxx, -fxxx, -mXXX, -Kxxx These system specific options will
                 be passed through to the compiler to allow you to
                 define preprocessor symbols, specify additional libraries,
                 library directories or other compiler options.
 
+  -DHAVE_CRYPTODEV Enable the BSD cryptodev engine even if we are not using
+		BSD. Useful if you are running ocf-linux or something
+		similar. Once enabled you can also enable the use of
+		cryptodev digests, which is usually slower unless you have
+		large amounts data. Use -DUSE_CRYPTODEV_DIGESTS to force
+		it.
 
  Installation in Detail
  ----------------------
@@ -158,7 +164,7 @@
      standard headers).  If it is a problem with OpenSSL itself, please
      report the problem to <openssl-bugs@openssl.org> (note that your
      message will be recorded in the request tracker publicly readable
-     via http://www.openssl.org/support/rt2.html and will be forwarded to a
+     via http://www.openssl.org/support/rt.html and will be forwarded to a
      public mailing list). Include the output of "make report" in your message.
      Please check out the request tracker. Maybe the bug was already
      reported or has already been fixed.
@@ -180,7 +186,7 @@
      in Makefile.ssl and run "make clean; make". Please send a bug
      report to <openssl-bugs@openssl.org>, including the output of
      "make report" in order to be added to the request tracker at
-     http://www.openssl.org/support/rt2.html.
+     http://www.openssl.org/support/rt.html.
 
   4. If everything tests ok, install OpenSSL with
 
@@ -206,6 +212,10 @@
                        compile programs with libcrypto or libssl.
        lib             Contains the OpenSSL library files themselves.
 
+     Use "make install_sw" to install the software without documentation,
+     and "install_docs_html" to install HTML renditions of the manual
+     pages.
+
      Package builders who want to configure the library for standard
      locations, but have the package installed somewhere else so that
      it can easily be packaged, can use

INSTALL.NW

@@ -8,58 +8,62 @@ Notes about building OpenSSL for NetWare.
 BUILD PLATFORM:
 ---------------
 The build scripts (batch files, perl scripts, etc) have been developed and
-tested on W2K.  The scripts should run fine on other Windows
-platforms (NT, Win9x, WinXP) but they haven't been tested.  They may require 
-some modifications.
+tested on W2K.  The scripts should run fine on other Windows platforms
+(NT, Win9x, WinXP) but they have not been tested.  They may require some
+modifications.
 
 
 Supported NetWare Platforms - NetWare 5.x, NetWare 6.x:
-------------------------------------------
-OpenSSL uses the WinSock interfaces introduced in NetWare 5.  Therefore,
-previous versions of NetWare, 4.x and 3.x, are not supported.
+-------------------------------------------------------
+OpenSSL can either use the WinSock interfaces introduced in NetWare 5,
+or the BSD socket interface.  Previous versions of NetWare, 4.x and 3.x,
+are only supported if OpenSSL is build for CLIB and BSD sockets;
+WinSock builds only support NetWare 5 and up.
 
 On NetWare there are two c-runtime libraries.  There is the legacy CLIB 
-interfaces and the newer LibC interfaces.  Being ANSI-C libraries, the 
-functionality in CLIB and LibC is similar but the LibC interfaces are built 
+interfaces and the newer LIBC interfaces.  Being ANSI-C libraries, the 
+functionality in CLIB and LIBC is similar but the LIBC interfaces are built 
 using Novell Kernal Services (NKS) which is designed to leverage 
 multi-processor environments.
 
-The NetWare port of OpenSSL can configured to build using CLIB or LibC.  The 
-CLIB build was developed and tested using NetWare 5.0 sp6.0a.  The LibC 
+The NetWare port of OpenSSL can be configured to build using CLIB or LIBC.
+The CLIB build was developed and tested using NetWare 5.0 sp6.0a.  The LIBC 
 build was developed and tested using the NetWare 6.0 FCS.  
 
-The necessary LibC functionality ships with NetWare 6.  However, earlier 
-NetWare 5.x versions will require updates in order to run the OpenSSL LibC
-build.
+The necessary LIBC functionality ships with NetWare 6.  However, earlier 
+NetWare 5.x versions will require updates in order to run the OpenSSL LIBC
+build (NetWare 5.1 SP8 is known to work).
 
-As of June 2005, the LibC build can be configured to use BSD sockets instead
+As of June 2005, the LIBC build can be configured to use BSD sockets instead
 of WinSock sockets. Call Configure (usually through netware\build.bat) using
 a target of "netware-libc-bsdsock" instead of "netware-libc".
 
+As of June 2007, support for CLIB and BSD sockets is also now available
+using a target of "netware-clib-bsdsock" instead of "netware-clib";
+also gcc builds are now supported on both Linux and Win32 (post 0.9.8e).
 
 REQUIRED TOOLS:
 ---------------
 Based upon the configuration and build options used, some or all of the
 following tools may be required:
 
-
 * Perl for Win32 - required (http://www.activestate.com/ActivePerl)
    Used to run the various perl scripts on the build platform.
 
-
 * Perl 5.8.0 for NetWare v3.20 (or later) - required 
    (http://developer.novell.com) Used to run the test script on NetWare 
    after building.
 
+* Compiler / Linker - required:
+   Metrowerks CodeWarrior PDK 2.1 (or later) for NetWare (commercial):
+      Provides command line tools used for building.
+      Tools:
+      mwccnlm.exe  - C/C++ Compiler for NetWare
+      mwldnlm.exe  - Linker for NetWare
+      mwasmnlm.exe - x86 assembler for NetWare (if using assembly option)
 
-* Metrowerks CodeWarrior PDK 2.1 (or later) for NetWare - required:
-   Provides command line tools used for building.
-
-   Tools:
-   mwccnlm.exe  - C/C++ Compiler for NetWare
-   mwldnlm.exe  - Linker for NetWare
-   mwasmnlm.exe - x86 assembler for NetWare (if using assembly option)
-
+   gcc / nlmconv Cross-Compiler, available from Novell Forge (free):
+         http://forge.novell.com/modules/xfmod/project/?aunixnw
 
 * Assemblers - optional:
    If you intend to build using the assembly options you will need an
@@ -79,11 +83,11 @@ following tools may be required:
    In order to build you will need a make tool.  Two make tools are
    supported, GNU make (gmake.exe) or Microsoft nmake.exe.
 
-   gmake.exe - GNU make for Windows (version 3.75 used for development)
-         http://www.gnu.org/software/make/make.html
+   make.exe - GNU make for Windows (version 3.75 used for development)
+         http://gnuwin32.sourceforge.net/packages/make.htm
 
    nmake.exe - Microsoft make (Version 6.00.8168.0 used for development)
-
+         http://support.microsoft.com/kb/132084/EN-US/
 
 * Novell Developer Kit (NDK) - required: (http://developer.novell.com)
 
@@ -123,14 +127,14 @@ following tools may be required:
 
    LIBC - BUILDS:
    
-      Libraries for C (LibC) - LibC headers and import files
-         If you are going to build a LibC version of OpenSSL, you will
-         need the LibC headers and imports.  The March 14, 2002 NDK release or
+      Libraries for C (LIBC) - LIBC headers and import files
+         If you are going to build a LIBC version of OpenSSL, you will
+         need the LIBC headers and imports.  The March 14, 2002 NDK release or
          later is required.  
          
-         NOTE: The LibC SDK includes the necessary WinSock2 support.  It
-         It is not necessary to download the WinSock2 Developer when building
-         for LibC. The LibC SDK also includes the appropriate BSD socket support
+         NOTE: The LIBC SDK includes the necessary WinSock2 support.
+         It is not necessary to download the WinSock2 NDK when building for
+         LIBC. The LIBC SDK also includes the appropriate BSD socket support
          if configuring to use BSD sockets.
 
 
@@ -143,33 +147,36 @@ The set_env.bat file is a template you can use to set up the path
 and environment variables you will need to build.  Modify the
 various lines to point to YOUR tools and run set_env.bat.
 
-   netware\set_env.bat [target]
+   netware\set_env.bat <target> [compiler]
 
-      target        - "netware-clib" - CLib NetWare build
-                    - "netware-libc" - LibC NetWare build
+      target        - "netware-clib" - CLIB NetWare build
+                    - "netware-libc" - LIBC NetWare build
+
+      compiler      - "gnuc"         - GNU GCC Compiler
+                    - "codewarrior"  - MetroWerks CodeWarrior (default)
 
 If you don't use set_env.bat, you will need to set up the following
 environment variables:
 
-   path - Set path to point to the tools you will use.
+   PATH - Set PATH to point to the tools you will use.
 
-   MWCIncludes - The location of the NDK include files.
+   INCLUDE - The location of the NDK include files.
          
-            CLIB ex: set MWCIncludes=c:\ndk\nwsdk\include\nlm
-            LibC ex: set MWCIncludes=c:\ndk\libc\include
+            CLIB ex: set INCLUDE=c:\ndk\nwsdk\include\nlm
+            LIBC ex: set INCLUDE=c:\ndk\libc\include
 
    PRELUDE - The absolute path of the prelude object to link with.  For
             a CLIB build it is recommended you use the "clibpre.o" files shipped
-            with the Metrowerks PDK for NetWare.  For a LibC build you should 
-            use the "libcpre.o" file delivered with the LibC NDK components.
+            with the Metrowerks PDK for NetWare.  For a LIBC build you should 
+            use the "libcpre.o" file delivered with the LIBC NDK components.
 
             CLIB ex: set PRELUDE=c:\ndk\nwsdk\imports\clibpre.o
-            LibC ex: set PRELUDE=c:\ndk\libc\imports\libcpre.o
+            LIBC ex: set PRELUDE=c:\ndk\libc\imports\libcpre.o
 
    IMPORTS - The locaton of the NDK import files.
 
             CLIB ex: set IMPORTS=c:\ndk\nwsdk\imports
-            LibC ex: set IMPORTS=c:\ndk\libc\imports
+            LIBC ex: set IMPORTS=c:\ndk\libc\imports
 
 
 In order to build, you need to run the Perl scripts to configure the build
@@ -182,9 +189,10 @@ the assembly code.  Always run build.bat from the "openssl" directory.
 
    netware\build [target] [debug opts] [assembly opts] [configure opts]
 
-      target        - "netware-clib" - CLib NetWare build (WinSock Sockets)
-                    - "netware-libc" - LibC NetWare build (WinSock Sockets)
-                    - "netware-libc-bsdsock" - LibC NetWare build (BSD Sockets)
+      target        - "netware-clib" - CLIB NetWare build (WinSock Sockets)
+                    - "netware-clib-bsdsock" - CLIB NetWare build (BSD Sockets)
+                    - "netware-libc" - LIBC NetWare build (WinSock Sockets)
+                    - "netware-libc-bsdsock" - LIBC NetWare build (BSD Sockets)
  
       debug opts    - "debug"  - build debug
 
@@ -193,25 +201,27 @@ the assembly code.  Always run build.bat from the "openssl" directory.
                       "no-asm"   - don't use assembly
 
       configure opts- all unrecognized arguments are passed to the
-                      perl configure script
+                      perl 'configure' script. See that script for
+                      internal documentation regarding options that
+                      are available.
 
    examples:
 
       CLIB build, debug, without assembly:
          netware\build.bat netware-clib debug no-asm
 
-      LibC build, non-debug, using NASM assembly:
-         netware\build.bat netware-libc nw-nasm
+      LIBC build, non-debug, using NASM assembly, add mdc2 support:
+         netware\build.bat netware-libc nw-nasm enable-mdc2
 
-      LibC build, BSD sockets, non-debug, without assembly:
+      LIBC build, BSD sockets, non-debug, without assembly:
          netware\build.bat netware-libc-bsdsock no-asm
 
 Running build.bat generates a make file to be processed by your make 
 tool (gmake or nmake):
 
    CLIB ex: gmake -f netware\nlm_clib_dbg.mak 
-   LibC ex: gmake -f netware\nlm_libc.mak 
-   LibC ex: gmake -f netware\nlm_libc_bsdsock.mak 
+   LIBC ex: gmake -f netware\nlm_libc.mak 
+   LIBC ex: gmake -f netware\nlm_libc_bsdsock.mak 
 
 
 You can also run the build scripts manually if you do not want to use the
@@ -220,7 +230,7 @@ subdirectory (in the order listed below):
 
    perl configure no-asm [other config opts] [netware-clib|netware-libc|netware-libc-bsdsock]
       configures no assembly build for specified netware environment
-      (CLIB or LibC).
+      (CLIB or LIBC).
 
    perl util\mkfiles.pl >MINFO
       generates a listing of source files (used by mk1mf)
@@ -250,12 +260,12 @@ The output from the build is placed in the following directories:
       tmp_nw_clib         - temporary build files
       outinc_nw_clib      - necesary include files
 
-   LibC Debug build:
+   LIBC Debug build:
       out_nw_libc.dbg     - static libs & test nlm(s)
       tmp_nw_libc.dbg     - temporary build files
       outinc_nw_libc      - necessary include files
 
-   LibC Non-debug build:
+   LIBC Non-debug build:
       out_nw_libc         - static libs & test nlm(s)
       tmp_nw_libc         - temporary build files
       outinc_nw_libc      - necesary include files
@@ -281,7 +291,7 @@ To run cpy_tests.bat:
       NetWare drive    - drive letter of mapped drive
 
       CLIB ex: netware\cpy_tests out_nw_clib m:
-      LibC ex: netware\cpy_tests out_nw_libc m:
+      LIBC ex: netware\cpy_tests out_nw_libc m:
 
 
 The Perl script, "do_tests.pl", in the "OpenSSL" directory on the server
@@ -356,9 +366,9 @@ clean up the resources!
 
 Multi-threaded Development
 ---------------------------
-The NetWare version of OpenSSL is thread-safe however, multi-threaded
+The NetWare version of OpenSSL is thread-safe, however multi-threaded
 applications must provide the necessary locking function callbacks.  This
-is described in doc\threads.doc.  The file "openssl\crypto\threads\mttest.c"
+is described in doc\threads.doc.  The file "openssl-x.x.x\crypto\threads\mttest.c"
 is a multi-threaded test program and demonstrates the locking functions.
 
 
@@ -428,7 +438,7 @@ Makefile "vclean"
 ------------------
 The generated makefile has a "vclean" target which cleans up the build
 directories.  If you have been building successfully and suddenly
-experience problems, use "vclean" (gmake -f netware\nlm.mak vclean) and retry.
+experience problems, use "vclean" (gmake -f netware\nlm_xxxx.mak vclean) and retry.
 
 
 "Undefined Symbol" Linker errors

INSTALL.W32

@@ -5,19 +5,30 @@
  [Instructions for building for Windows CE can be found in INSTALL.WCE]
  [Instructions for building for Win64 can be found in INSTALL.W64]
 
- Heres a few comments about building OpenSSL in Windows environments.  Most
- of this is tested on Win32 but it may also work in Win 3.1 with some
- modification.
+ Here are a few comments about building OpenSSL for Win32 environments,
+ such as Windows NT and Windows 9x. It should be noted though that
+ Windows 9x are not ordinarily tested. Its mention merely means that we
+ attempt to maintain certain programming discipline and pay attention
+ to backward compatibility issues, in other words it's kind of expected
+ to work on Windows 9x, but no regression tests are actually performed.
 
- You need Perl for Win32.  Unless you will build on Cygwin, you will need
- ActiveState Perl, available from http://www.activestate.com/ActivePerl.
+ On additional note newer OpenSSL versions are compiled and linked with
+ Winsock 2. This means that minimum OS requirement was elevated to NT 4
+ and Windows 98 [there is Winsock 2 update for Windows 95 though].
 
- and one of the following C compilers:
+ - you need Perl for Win32.  Unless you will build on Cygwin, you will need
+   ActiveState Perl, available from http://www.activestate.com/ActivePerl.
+
+ - one of the following C compilers:
 
   * Visual C++
   * Borland C
   * GNU C (Cygwin or MinGW)
 
+- Netwide Assembler, a.k.a. NASM, available from http://nasm.sourceforge.net/
+  is required if you intend to utilize assembler modules. Note that NASM
+  is now the only supported assembler.
+
  If you are compiling from a tarball or a CVS snapshot then the Win32 files
  may well be not up to date. This may mean that some "tweaking" is required to
  get it all to work. See the trouble shooting section later on for if (when?)
@@ -26,39 +37,18 @@
  Visual C++
  ----------
 
- If you want to compile in the assembly language routines with Visual C++ then
- you will need an assembler. This is worth doing because it will result in
- faster code: for example it will typically result in a 2 times speedup in the
- RSA routines. Currently the following assemblers are supported:
+ If you want to compile in the assembly language routines with Visual
+ C++, then you will need already mentioned Netwide Assembler binary,
+ nasmw.exe or nasm.exe, to be available on your %PATH%.
 
-  * Microsoft MASM (aka "ml")
-  * Free Netwide Assembler NASM.
+ Firstly you should run Configure with platform VC-WIN32:
 
- MASM is distributed with most versions of VC++. For the versions where it is
- not included in VC++, it is also distributed with some Microsoft DDKs, for
- example the Windows NT 4.0 DDK and the Windows 98 DDK. If you do not have
- either of these DDKs then you can just download the binaries for the Windows
- 98 DDK and extract and rename the two files XXXXXml.exe and XXXXXml.err, to
- ml.exe and ml.err and install somewhere on your PATH. Both DDKs can be
- downloaded from the Microsoft developers site www.msdn.com.
+ > perl Configure VC-WIN32 --prefix=c:\some\openssl\dir
 
- NASM is freely available. Version 0.98 was used during testing: other versions
- may also work. It is available from many places, see for example:
- http://www.kernel.org/pub/software/devel/nasm/binaries/win32/
- The NASM binary nasmw.exe needs to be installed anywhere on your PATH.
+ Where the prefix argument specifies where OpenSSL will be installed to.
 
- Firstly you should run Configure:
-
- > perl Configure VC-WIN32 --prefix=c:/some/openssl/dir
-
-Where the prefix argument specifies where OpenSSL will be installed to.
-
- Next you need to build the Makefiles and optionally the assembly language
- files:
-
- - If you are using MASM then run:
-
-   > ms\do_masm
+ Next you need to build the Makefiles and optionally the assembly
+ language files:
 
  - If you are using NASM then run:
 
@@ -66,6 +56,7 @@ Where the prefix argument specifies where OpenSSL will be installed to.
 
  - If you don't want to use the assembly language files at all then run:
 
+   > perl Configure VC-WIN32 no-asm --prefix=c:/some/openssl/dir
    > ms\do_ms
 
  If you get errors about things not having numbers assigned then check the
@@ -76,42 +67,39 @@ Where the prefix argument specifies where OpenSSL will be installed to.
 
  > nmake -f ms\ntdll.mak
 
- If all is well it should compile and you will have some DLLs and executables
- in out32dll. If you want to try the tests then do:
+ If all is well it should compile and you will have some DLLs and
+ executables in out32dll. If you want to try the tests then do:
  
  > nmake -f ms\ntdll.mak test
 
 
-To install OpenSSL to the specified location do:
+ To install OpenSSL to the specified location do:
 
-> nmake -f ms\ntdll.mak install
+ > nmake -f ms\ntdll.mak install
 
  Tweaks:
 
- There are various changes you can make to the Win32 compile environment. By
- default the library is not compiled with debugging symbols. If you add 'debug'
- to the mk1mf.pl lines in the do_* batch file then debugging symbols will be
- compiled in. Note that mk1mf.pl expects the platform to be the last argument
- on the command line, so 'debug' must appear before that, as all other options.
+ There are various changes you can make to the Win32 compile
+ environment. By default the library is not compiled with debugging
+ symbols. If you use the platform debug-VC-WIN32 instead of VC-WIN32
+ then debugging symbols will be compiled in.
 
-
- By default in 0.9.8 OpenSSL will compile builtin ENGINES into the libeay32.dll
- shared library. If you specify the "no-static-engine" option on the command
- line to Configure the shared library build (ms\ntdll.mak) will compile the
- engines as separate DLLs.
+ By default in 1.0.0 OpenSSL will compile builtin ENGINES into the
+ separate shared librariesy. If you specify the "enable-static-engine"
+ option on the command line to Configure the shared library build
+ (ms\ntdll.mak) will compile the engines into libeay32.dll instead.
 
  The default Win32 environment is to leave out any Windows NT specific
  features.
 
- If you want to enable the NT specific features of OpenSSL (currently only the
- logging BIO) follow the instructions above but call the batch file do_nt.bat
- instead of do_ms.bat.
+ If you want to enable the NT specific features of OpenSSL (currently
+ only the logging BIO) follow the instructions above but call the batch
+ file do_nt.bat instead of do_ms.bat.
 
  You can also build a static version of the library using the Makefile
  ms\nt.mak
 
 
-
  Borland C++ builder 5
  ---------------------
 
@@ -137,17 +125,13 @@ To install OpenSSL to the specified location do:
  GNU C (Cygwin)
  --------------
 
- Cygwin provides a bash shell and GNU tools environment running
- on NT 4.0, Windows 9x, Windows ME, Windows 2000, and Windows XP.
- Consequently, a make of OpenSSL with Cygwin is closer to a GNU
- bash environment such as Linux than to other the other Win32
- makes.
-
- Cygwin implements a Posix/Unix runtime system (cygwin1.dll).
- It is also possible to create Win32 binaries that only use the
- Microsoft C runtime system (msvcrt.dll or crtdll.dll) using
- MinGW. MinGW can be used in the Cygwin development environment
- or in a standalone setup as described in the following section.
+ Cygwin implements a Posix/Unix runtime system (cygwin1.dll) on top of
+ Win32 subsystem and provides a bash shell and GNU tools environment.
+ Consequently, a make of OpenSSL with Cygwin is virtually identical to
+ Unix procedure. It is also possible to create Win32 binaries that only
+ use the Microsoft C runtime system (msvcrt.dll or crtdll.dll) using
+ MinGW. MinGW can be used in the Cygwin development environment or in a
+ standalone setup as described in the following section.
 
  To build OpenSSL using Cygwin:
 
@@ -192,35 +176,35 @@ To install OpenSSL to the specified location do:
  non-fatal error in "make test" but is otherwise harmless.  If
  desired and needed, GNU bc can be built with Cygwin without change.
 
- GNU C (MinGW)
+ GNU C (MinGW/MSYS)
  -------------
 
- * Compiler installation:
+ * Compiler and shell environment installation:
 
-   MinGW is available from http://www.mingw.org. Run the installer and
-   set the MinGW bin directory to the PATH in "System Properties" or
-   autoexec.bat.
+   MinGW and MSYS are available from http://www.mingw.org/, both are
+   required. Run the installers and do whatever magic they say it takes
+   to start MSYS bash shell with GNU tools on its PATH.
 
  * Compile OpenSSL:
 
-   > ms\mingw32
+   $ ./config
+   [...]
+   $ make
+   [...]
+   $ make test
 
-   This will create the library and binaries in out. In case any problems
-   occur, try
-   > ms\mingw32 no-asm
-   instead.
+   This will create the library and binaries in root source directory
+   and openssl.exe application in apps directory.
+
+   It is also possible to cross-compile it on Linux by configuring
+   with './Configure --cross-compile-prefix=i386-mingw32- mingw ...'.
+   'make test' is naturally not applicable then.
 
    libcrypto.a and libssl.a are the static libraries. To use the DLLs,
    link with libeay32.a and libssl32.a instead.
 
-   See troubleshooting if you get error messages about functions not having
-   a number assigned.
-
- * You can now try the tests:
-
-   > cd out
-   > ..\ms\test
-
+   See troubleshooting if you get error messages about functions not
+   having a number assigned.
 
  Installation
  ------------
@@ -307,13 +291,13 @@ To install OpenSSL to the specified location do:
 
  If you link with static OpenSSL libraries [those built with ms/nt.mak],
  then you're expected to additionally link your application with
- WSOCK32.LIB, ADVAPI32.LIB, GDI32.LIB and USER32.LIB. Those developing
+ WS2_32.LIB, ADVAPI32.LIB, GDI32.LIB and USER32.LIB. Those developing
  non-interactive service applications might feel concerned about linking
- with latter two, as they are justly associated with interactive desktop,
- which is not available to service processes. The toolkit is designed
- to detect in which context it's currently executed, GUI, console app
- or service, and act accordingly, namely whether or not to actually make
- GUI calls.
+ with the latter two, as they are justly associated with interactive
+ desktop, which is not available to service processes. The toolkit is
+ designed to detect in which context it's currently executed, GUI,
+ console app or service, and act accordingly, namely whether or not to
+ actually make GUI calls.
 
  If you link with OpenSSL .DLLs, then you're expected to include into
  your application code small "shim" snippet, which provides glue between

INSTALL.WCE

@@ -4,27 +4,36 @@
 
  Building OpenSSL for Windows CE requires the following external tools:
 
-  * Microsoft eMbedded Visual C++ 3.0
-  * wcecompat compatibility library (www.essemer.com.au)
-  * Optionally ceutils for running automated tests (www.essemer.com.au)
+  * Microsoft eMbedded Visual C++ 3.0 or later
+  * Appropriate SDK might be required
+  * Perl for Win32 [commonly recommended ActiveState Perl is available
+    from http://www.activestate.com/Products/ActivePerl/]
 
- You also need Perl for Win32.  You will need ActiveState Perl, available
- from http://www.activestate.com/ActivePerl.
+  * wcecompat compatibility library available at
+    http://www.essemer.com.au/windowsce/
+  * Optionally ceutils for running automated tests (same location)
 
- Windows CE support in OpenSSL relies on wcecompat and therefore it's
- appropriate to check http://www.essemer.com.au/windowsce/ for updates in
- case of compilation problems. As for the moment of this writing version
- 1.1 is available and actually required for WCE 4.2 and newer platforms.
- All Windows CE specific issues should be directed to www.essemer.com.au.
+  _or_
 
- The C Runtime Library implementation for Windows CE that is included with
- Microsoft eMbedded Visual C++ 3.0 is incomplete and in some places
- incorrect.  wcecompat plugs the holes and tries to bring the Windows CE
- CRT to a level that is more compatible with ANSI C.  wcecompat goes further
- and provides low-level IO and stream IO support for stdin/stdout/stderr
- (which Windows CE does not provide).  This IO functionality is not needed
- by the OpenSSL library itself but is used for the tests and openssl.exe.
- More information is available at www.essemer.com.au.
+  * PocketConsole driver and PortSDK available at
+    http://www.symbolictools.de/public/pocketconsole/
+  * CMD command interpreter (same location)
+
+ As Windows CE support in OpenSSL relies on 3rd party compatibility
+ library, it's appropriate to check corresponding URL for updates. For
+ example if you choose wcecompat, note that as for the moment of this
+ writing version 1.2 is available and actually required for WCE 4.2
+ and newer platforms. All wcecompat issues should be directed to
+ www.essemer.com.au.
+
+ Why compatibility library at all? The C Runtime Library implementation
+ for Windows CE that is included with Microsoft eMbedded Visual C++ is
+ incomplete and in some places incorrect.  Compatibility library plugs
+ the holes and tries to bring the Windows CE CRT to [more] usable level.
+ Most gaping hole in CRT is support for stdin/stdout/stderr IO, which
+ proposed compatibility libraries solve in two different ways: wcecompat
+ redirects IO to active sync link, while PortSDK - to NT-like console
+ driver on the handheld itself.
 
  Building
  --------
@@ -34,9 +43,21 @@
 
  > "C:\Program Files\Microsoft eMbedded Tools\EVC\WCE300\BIN\WCEARM.BAT"
 
- Next indicate where wcecompat is located:
+ Next pick compatibility library according to your preferences.
 
- > set WCECOMPAT=C:\wcecompat
+ 1. To choose wcecompat set up WCECOMPAT environment variable pointing
+    at the location of wcecompat tree "root":
+
+    > set WCECOMPAT=C:\wcecompat
+    > set PORTSDK_LIBPATH=
+
+ 2. To choose PortSDK set up PORTSDK_LIBPATH to point at hardware-
+    specific location where your portlib.lib is installed:
+
+    > set PORTSDK_LIBPATH=C:\PortSDK\lib\ARM
+    > set WCECOMPAT=
+
+ Note that you may not set both variables.
 
  Next you should run Configure:
 
@@ -52,16 +73,16 @@
 
  Then from the VC++ environment at a prompt do:
 
- - to build static libraries:
-
-   > nmake -f ms\ce.mak
-
- - or to build DLLs:
-
    > nmake -f ms\cedll.mak
 
- If all is well it should compile and you will have some static libraries and
- executables in out32, or some DLLs and executables in out32dll.  If you want
+ [note that static builds are not supported under CE]
+
+ If all is well it should compile and you will have some DLLs and executables
+ in out32dll*. 
+
+ <<< everyting below needs revision in respect to wcecompat vs. PortSDK >>>
+
+ If you want
  to try the tests then make sure the ceutils are in the path and do:
  
  > cd out32

LICENSE

@@ -12,7 +12,7 @@
   ---------------
 
 /* ====================================================================
- * Copyright (c) 1998-2007 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2008 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions

MacOS/GetHTTPS.src/ErrorHandling.hpp

@@ -29,7 +29,7 @@ OSErr AppendErrorMessageToHandle(Handle inoutHandle);
 
 
 
-//	A bunch of evil macros that would be uneccessary if I were always using C++ !
+//	A bunch of evil macros that would be unnecessary if I were always using C++ !
 
 #define SetErrorMessageAndBailIfNil(theArg,theMessage)								\
 {																					\

Makefile.org

@@ -66,10 +66,12 @@ EXE_EXT=
 ARFLAGS=
 AR=ar $(ARFLAGS) r
 RANLIB= ranlib
+NM= nm
 PERL= perl
 TAR= tar
 TARFLAGS= --no-recursion
 MAKEDEPPROG=makedepend
+LIBDIR=lib
 
 # We let the C compiler driver to take care of .s files. This is done in
 # order to be excused from maintaining a separate set of architecture
@@ -87,7 +89,7 @@ PROCESSOR=
 CPUID_OBJ= 
 BN_ASM= bn_asm.o
 DES_ENC= des_enc.o fcrypt_b.o
-AES_ASM_OBJ=aes_core.o aes_cbc.o
+AES_ENC= aes_core.o aes_cbc.o
 BF_ENC= bf_enc.o
 CAST_ENC= c_enc.o
 RC4_ENC= rc4_enc.o
@@ -95,6 +97,9 @@ RC5_ENC= rc5_enc.o
 MD5_ASM_OBJ= 
 SHA1_ASM_OBJ= 
 RMD160_ASM_OBJ= 
+WP_ASM_OBJ=
+CMLL_ENC=
+PERLASM_SCHEME=
 
 # KRB5 stuff
 KRB5_INCLUDES=
@@ -105,17 +110,18 @@ ZLIB_INCLUDE=
 LIBZLIB=
 
 DIRS=   crypto ssl engines apps test tools
+ENGDIRS= ccgost
 SHLIBDIRS= crypto ssl
 
 # dirs in crypto to build
 SDIRS=  \
 	objects \
-	md2 md4 md5 sha mdc2 hmac ripemd \
-	des aes rc2 rc4 rc5 idea bf cast camellia seed \
+	md2 md4 md5 sha mdc2 hmac ripemd whrlpool \
+	des aes rc2 rc4 rc5 idea bf cast camellia seed modes \
 	bn ec rsa dsa ecdsa dh ecdh dso engine \
 	buffer bio stack lhash rand err \
 	evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5 \
-	store pqueue
+	cms pqueue ts jpake store
 # keep in mind that the above list is adjusted by ./Configure
 # according to no-xxx arguments...
 
@@ -129,6 +135,8 @@ MANDIR=$(OPENSSLDIR)/man
 MAN1=1
 MAN3=3
 MANSUFFIX=
+HTMLSUFFIX=html
+HTMLDIR=$(OPENSSLDIR)/html
 SHELL=/bin/sh
 
 TOP=    .
@@ -168,29 +176,35 @@ CLEARENV=	TOP= && unset TOP $${LIB+LIB} $${LIBS+LIBS}	\
 		$${SHAREDCMD+SHAREDCMD} $${SHAREDFLAGS+SHAREDFLAGS}	\
 		$${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS}
 
-BUILDENV=	PLATFORM='${PLATFORM}' PROCESSOR='${PROCESSOR}' \
-		CC='${CC}' CFLAG='${CFLAG}' 			\
-		AS='${CC}' ASFLAG='${CFLAG} -c'			\
-		AR='${AR}' PERL='${PERL}' RANLIB='${RANLIB}'	\
-		SDIRS='${SDIRS}' LIBRPATH='${INSTALLTOP}/lib'	\
-		INSTALL_PREFIX='${INSTALL_PREFIX}'		\
-		INSTALLTOP='${INSTALLTOP}' OPENSSLDIR='${OPENSSLDIR}'	\
-		MAKEDEPEND='$$$${TOP}/util/domd $$$${TOP} -MD ${MAKEDEPPROG}' \
-		DEPFLAG='-DOPENSSL_NO_DEPRECATED ${DEPFLAG}'	\
-		MAKEDEPPROG='${MAKEDEPPROG}'			\
-		SHARED_LDFLAGS='${SHARED_LDFLAGS}'		\
-		KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}'	\
-		EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}'	\
-		SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}'	\
-		PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}'	\
-		CPUID_OBJ='${CPUID_OBJ}'			\
-		BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' 	\
-		AES_ASM_OBJ='${AES_ASM_OBJ}'			\
-		BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}'	\
-		RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}'	\
-		SHA1_ASM_OBJ='${SHA1_ASM_OBJ}'			\
-		MD5_ASM_OBJ='${MD5_ASM_OBJ}'			\
-		RMD160_ASM_OBJ='${RMD160_ASM_OBJ}'		\
+BUILDENV=	PLATFORM='$(PLATFORM)' PROCESSOR='$(PROCESSOR)' \
+		CC='$(CC)' CFLAG='$(CFLAG)' 			\
+		AS='$(CC)' ASFLAG='$(CFLAG) -c'			\
+		AR='$(AR)' NM='$(NM)' RANLIB='$(RANLIB)'	\
+		CROSS_COMPILE='$(CROSS_COMPILE)'	\
+		PERL='$(PERL)' ENGDIRS='$(ENGDIRS)'		\
+		SDIRS='$(SDIRS)' LIBRPATH='$(INSTALLTOP)/$(LIBDIR)'	\
+		INSTALL_PREFIX='$(INSTALL_PREFIX)'		\
+		INSTALLTOP='$(INSTALLTOP)' OPENSSLDIR='$(OPENSSLDIR)'	\
+		LIBDIR='$(LIBDIR)'				\
+		MAKEDEPEND='$$$${TOP}/util/domd $$$${TOP} -MD $(MAKEDEPPROG)' \
+		DEPFLAG='-DOPENSSL_NO_DEPRECATED $(DEPFLAG)'	\
+		MAKEDEPPROG='$(MAKEDEPPROG)'			\
+		SHARED_LDFLAGS='$(SHARED_LDFLAGS)'		\
+		KRB5_INCLUDES='$(KRB5_INCLUDES)' LIBKRB5='$(LIBKRB5)'	\
+		ZLIB_INCLUDE='$(ZLIB_INCLUDE)' LIBZLIB='$(LIBZLIB)'	\
+		EXE_EXT='$(EXE_EXT)' SHARED_LIBS='$(SHARED_LIBS)'	\
+		SHLIB_EXT='$(SHLIB_EXT)' SHLIB_TARGET='$(SHLIB_TARGET)'	\
+		PEX_LIBS='$(PEX_LIBS)' EX_LIBS='$(EX_LIBS)'	\
+		CPUID_OBJ='$(CPUID_OBJ)'			\
+		BN_ASM='$(BN_ASM)' DES_ENC='$(DES_ENC)' 	\
+		AES_ENC='$(AES_ENC)' CMLL_ENC='$(CMLL_ENC)'	\
+		BF_ENC='$(BF_ENC)' CAST_ENC='$(CAST_ENC)'	\
+		RC4_ENC='$(RC4_ENC)' RC5_ENC='$(RC5_ENC)'	\
+		SHA1_ASM_OBJ='$(SHA1_ASM_OBJ)'			\
+		MD5_ASM_OBJ='$(MD5_ASM_OBJ)'			\
+		RMD160_ASM_OBJ='$(RMD160_ASM_OBJ)'		\
+		WP_ASM_OBJ='$(WP_ASM_OBJ)'			\
+		PERLASM_SCHEME='$(PERLASM_SCHEME)'		\
 		THIS=$${THIS:-$@} MAKEFILE=Makefile MAKEOVERRIDES=
 # MAKEOVERRIDES= effectively "equalizes" GNU-ish and SysV-ish make flavors,
 # which in turn eliminates ambiguities in variable treatment with -e.
@@ -215,7 +229,7 @@ BUILD_CMD=  if [ -d "$$dir" ]; then \
 	    fi
 RECURSIVE_BUILD_CMD=for dir in $(DIRS); do $(BUILD_CMD); done
 BUILD_ONE_CMD=\
-	if echo " $(DIRS) " | grep " $$dir " >/dev/null 2>/dev/null; then \
+	if expr " $(DIRS) " : ".* $$dir " >/dev/null 2>&1; then \
 		$(BUILD_CMD); \
 	fi
 
@@ -275,10 +289,10 @@ clean-shared:
 	done
 
 link-shared:
-	@ set -e; for i in ${SHLIBDIRS}; do \
+	@ set -e; for i in $(SHLIBDIRS); do \
 		$(MAKE) -f $(HERE)/Makefile.shared -e $(BUILDENV) \
-			LIBNAME=$$i LIBVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR} \
-			LIBCOMPATVERSIONS=";${SHLIB_VERSION_HISTORY}" \
+			LIBNAME=$$i LIBVERSION=$(SHLIB_MAJOR).$(SHLIB_MINOR) \
+			LIBCOMPATVERSIONS=";$(SHLIB_VERSION_HISTORY)" \
 			symlink.$(SHLIB_TARGET); \
 		libs="$$libs -l$$i"; \
 	done
@@ -286,13 +300,13 @@ link-shared:
 build-shared: do_$(SHLIB_TARGET) link-shared
 
 do_$(SHLIB_TARGET):
-	@ set -e; libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
-		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+	@ set -e; libs='-L. $(SHLIBDEPS)'; for i in $(SHLIBDIRS); do \
+		if [ "$$i" = "ssl" -a -n "$(LIBKRB5)" ]; then \
 			libs="$(LIBKRB5) $$libs"; \
 		fi; \
 		$(CLEARENV) && $(MAKE) -f Makefile.shared -e $(BUILDENV) \
-			LIBNAME=$$i LIBVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR} \
-			LIBCOMPATVERSIONS=";${SHLIB_VERSION_HISTORY}" \
+			LIBNAME=$$i LIBVERSION=$(SHLIB_MAJOR).$(SHLIB_MINOR) \
+			LIBCOMPATVERSIONS=";$(SHLIB_VERSION_HISTORY)" \
 			LIBDEPS="$$libs $(EX_LIBS)" \
 			link_a.$(SHLIB_TARGET); \
 		libs="-l$$i $$libs"; \
@@ -301,7 +315,7 @@ do_$(SHLIB_TARGET):
 libcrypto.pc: Makefile
 	@ ( echo 'prefix=$(INSTALLTOP)'; \
 	    echo 'exec_prefix=$${prefix}'; \
-	    echo 'libdir=$${exec_prefix}/lib'; \
+	    echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
 	    echo 'includedir=$${prefix}/include'; \
 	    echo ''; \
 	    echo 'Name: OpenSSL-libcrypto'; \
@@ -314,7 +328,7 @@ libcrypto.pc: Makefile
 libssl.pc: Makefile
 	@ ( echo 'prefix=$(INSTALLTOP)'; \
 	    echo 'exec_prefix=$${prefix}'; \
-	    echo 'libdir=$${exec_prefix}/lib'; \
+	    echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
 	    echo 'includedir=$${prefix}/include'; \
 	    echo ''; \
 	    echo 'Name: OpenSSL'; \
@@ -327,7 +341,7 @@ libssl.pc: Makefile
 openssl.pc: Makefile
 	@ ( echo 'prefix=$(INSTALLTOP)'; \
 	    echo 'exec_prefix=$${prefix}'; \
-	    echo 'libdir=$${exec_prefix}/lib'; \
+	    echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
 	    echo 'includedir=$${prefix}/include'; \
 	    echo ''; \
 	    echo 'Name: OpenSSL'; \
@@ -372,26 +386,29 @@ links:
 
 gentests:
 	@(cd test && echo "generating dummy tests (if needed)..." && \
-	$(CLEARENV) && $(MAKE) -e $(BUILDENV) TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on generate );
+	$(CLEARENV) && $(MAKE) -e $(BUILDENV) TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on generate );
 
 dclean:
-	rm -f *.bak
+	rm -rf *.bak include/openssl certs/.0
 	@set -e; target=dclean; $(RECURSIVE_BUILD_CMD)
 
 rehash: rehash.time
-rehash.time: certs
-	@(OPENSSL="`pwd`/util/opensslwrap.sh"; \
-	  OPENSSL_DEBUG_MEMORY=on; \
-	  export OPENSSL OPENSSL_DEBUG_MEMORY; \
-	  $(PERL) tools/c_rehash certs)
-	touch rehash.time
+rehash.time: certs apps
+	@if [ -z "$(CROSS_COMPILE)" ]; then \
+		(OPENSSL="`pwd`/util/opensslwrap.sh"; \
+		[ -x "apps/openssl.exe" ] && OPENSSL="apps/openssl.exe" || :; \
+		OPENSSL_DEBUG_MEMORY=on; \
+		export OPENSSL OPENSSL_DEBUG_MEMORY; \
+		$(PERL) tools/c_rehash certs) && \
+		touch rehash.time; \
+	else :; fi
 
 test:   tests
 
 tests: rehash
 	@(cd test && echo "testing..." && \
-	$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on tests );
-	util/opensslwrap.sh version -a
+	$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on OPENSSL_CONF=../apps/openssl.cnf tests );
+	OPENSSL_CONF=apps/openssl.cnf util/opensslwrap.sh version -a
 
 report:
 	@$(PERL) util/selftest.pl
@@ -424,6 +441,8 @@ crypto/objects/obj_dat.h: crypto/objects/obj_dat.pl crypto/objects/obj_mac.h
 	$(PERL) crypto/objects/obj_dat.pl crypto/objects/obj_mac.h crypto/objects/obj_dat.h
 crypto/objects/obj_mac.h: crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num
 	$(PERL) crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num crypto/objects/obj_mac.h
+crypto/objects/obj_xref.h: crypto/objects/objxref.pl crypto/objects/obj_xref.txt crypto/objects/obj_mac.num
+	$(PERL) crypto/objects/objxref.pl crypto/objects/obj_mac.num crypto/objects/obj_xref.txt >crypto/objects/obj_xref.h
 
 apps/openssl-vms.cnf: apps/openssl.cnf
 	$(PERL) VMS/VMSify-conf.pl < apps/openssl.cnf > apps/openssl-vms.cnf
@@ -436,7 +455,7 @@ TABLE: Configure
 	(echo 'Output of `Configure TABLE'"':"; \
 	$(PERL) Configure TABLE) > TABLE
 
-update: errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_dat.h apps/openssl-vms.cnf crypto/bn/bn_prime.h TABLE depend
+update: errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_dat.h crypto/objects/obj_xref.h apps/openssl-vms.cnf crypto/bn/bn_prime.h TABLE depend
 
 # Build distribution tar-file. As the list of files returned by "find" is
 # pretty long, on several platforms a "too many arguments" error or similar
@@ -467,8 +486,8 @@ tar-snap:
 dist:   
 	$(PERL) Configure dist
 	@$(MAKE) dist_pem_h
-	@$(MAKE) SDIRS='${SDIRS}' clean
-	@$(MAKE) TAR='${TAR}' TARFLAGS='${TARFLAGS}' tar
+	@$(MAKE) SDIRS='$(SDIRS)' clean
+	@$(MAKE) TAR='$(TAR)' TARFLAGS='$(TARFLAGS)' tar
 
 dist_pem_h:
 	(cd crypto/pem; $(MAKE) -e $(BUILDENV) pem.h; $(MAKE) clean)
@@ -477,9 +496,9 @@ install: all install_docs install_sw
 
 install_sw:
 	@$(PERL) $(TOP)/util/mkdir-p.pl $(INSTALL_PREFIX)$(INSTALLTOP)/bin \
-		$(INSTALL_PREFIX)$(INSTALLTOP)/lib \
-		$(INSTALL_PREFIX)$(INSTALLTOP)/lib/engines \
-		$(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig \
+		$(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR) \
+		$(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/engines \
+		$(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig \
 		$(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl \
 		$(INSTALL_PREFIX)$(OPENSSLDIR)/misc \
 		$(INSTALL_PREFIX)$(OPENSSLDIR)/certs \
@@ -494,10 +513,10 @@ install_sw:
 	do \
 		if [ -f "$$i" ]; then \
 		(       echo installing $$i; \
-			cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-			$(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-			chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-			mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i ); \
+			cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+			$(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+			chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+			mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i ); \
 		fi; \
 	done;
 	@set -e; if [ -n "$(SHARED_LIBS)" ]; then \
@@ -507,18 +526,28 @@ install_sw:
 			if [ -f "$$i" -o -f "$$i.a" ]; then \
 			(       echo installing $$i; \
 				if [ "$(PLATFORM)" != "Cygwin" ]; then \
-					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-					chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
+					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+					chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
 				else \
 					c=`echo $$i | sed 's/^lib\(.*\)\.dll\.a/cyg\1-$(SHLIB_VERSION_NUMBER).dll/'`; \
 					cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
 					chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
 					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
-					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-					chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
+					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+					chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
 				fi ); \
+				if expr $(PLATFORM) : 'mingw' > /dev/null; then \
+				(	case $$i in \
+						*crypto*) i=libeay32.dll;; \
+						*ssl*)    i=ssleay32.dll;; \
+					esac; \
+					echo installing $$i; \
+	 				cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
+	 				chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
+	 				mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i ); \
+				fi; \
 			fi; \
 		done; \
 		(	here="`pwd`"; \
@@ -531,12 +560,33 @@ install_sw:
 			sed -e '1,/^$$/d' doc/openssl-shared.txt; \
 		fi; \
 	fi
-	cp libcrypto.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig/libcrypto.pc
-	cp libssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig/libssl.pc
-	cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig/openssl.pc
+	cp libcrypto.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
+	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libcrypto.pc
+	cp libssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
+	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libssl.pc
+	cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
+	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/openssl.pc
+
+install_html_docs:
+	here="`pwd`"; \
+	for subdir in apps crypto ssl; do \
+		mkdir -p $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir; \
+		for i in doc/$$subdir/*.pod; do \
+			fn=`basename $$i .pod`; \
+			echo "installing html/$$fn.$(HTMLSUFFIX)"; \
+			cat $$i \
+			| sed -r 's/L<([^)]*)(\([0-9]\))?\|([^)]*)(\([0-9]\))?>/L<\1|\3>/g' \
+			| pod2html --podroot=doc --htmlroot=.. --podpath=apps:crypto:ssl \
+			| sed -r 's/<!DOCTYPE.*//g' \
+			> $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir/$$fn.$(HTMLSUFFIX); \
+			$(PERL) util/extract-names.pl < $$i | \
+				grep -v $$filecase "^$$fn\$$" | \
+				(cd $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir; \
+				 while read n; do \
+					PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$(HTMLSUFFIX) "$$n".$(HTMLSUFFIX); \
+				 done); \
+		done; \
+	done
 
 install_docs:
 	@$(PERL) $(TOP)/util/mkdir-p.pl \
@@ -564,7 +614,7 @@ install_docs:
 			(grep -v "[	]"; true) | \
 			(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
 			 while read n; do \
-				$$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
+				PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
 			 done); \
 	done; \
 	set -e; for i in doc/crypto/*.pod doc/ssl/*.pod; do \
@@ -581,7 +631,7 @@ install_docs:
 			(grep -v "[	]"; true) | \
 			(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
 			 while read n; do \
-				$$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
+				PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
 			 done); \
 	done
 

Makefile.shared

@@ -14,6 +14,8 @@ CFLAGS=$(CFLAG)
 LDFLAGS=
 SHARED_LDFLAGS=
 
+NM=nm
+
 # LIBNAME contains just the name of the library, without prefix ("lib"
 # on Unix, "cyg" for certain forms under Cygwin...) or suffix (.a, .so,
 # .dll, ...).  This one MUST have a value when using this makefile to
@@ -91,7 +93,7 @@ LINK_APP=	\
   ( $(SET_X);   \
     LIBDEPS="$${LIBDEPS:-$(LIBDEPS)}"; \
     LDCMD="$${LDCMD:-$(CC)}"; LDFLAGS="$${LDFLAGS:-$(CFLAGS)}"; \
-    LIBPATH=`for x in $$LIBDEPS; do if echo $$x | grep '^ *-L' > /dev/null 2>&1; then echo $$x | sed -e 's/^ *-L//'; fi; done | uniq`; \
+    LIBPATH=`for x in $$LIBDEPS; do echo $$x; done | sed -e 's/^ *-L//;t' -e d | uniq`; \
     LIBPATH=`echo $$LIBPATH | sed -e 's/ /:/g'`; \
     LD_LIBRARY_PATH=$$LIBPATH:$$LD_LIBRARY_PATH \
     $${LDCMD} $${LDFLAGS} -o $${APPNAME:=$(APPNAME)} $(OBJECTS) $${LIBDEPS} )
@@ -101,15 +103,13 @@ LINK_SO=	\
     LIBDEPS="$${LIBDEPS:-$(LIBDEPS)}"; \
     SHAREDCMD="$${SHAREDCMD:-$(CC)}"; \
     SHAREDFLAGS="$${SHAREDFLAGS:-$(CFLAGS) $(SHARED_LDFLAGS)}"; \
-    nm -Pg $$SHOBJECTS | grep ' [BDT] ' | cut -f1 -d' ' > lib$(LIBNAME).exp; \
-    LIBPATH=`for x in $$LIBDEPS; do if echo $$x | grep '^ *-L' > /dev/null 2>&1; then echo $$x | sed -e 's/^ *-L//'; fi; done | uniq`; \
+    LIBPATH=`for x in $$LIBDEPS; do echo $$x; done | sed -e 's/^ *-L//;t' -e d | uniq`; \
     LIBPATH=`echo $$LIBPATH | sed -e 's/ /:/g'`; \
     LD_LIBRARY_PATH=$$LIBPATH:$$LD_LIBRARY_PATH \
     $${SHAREDCMD} $${SHAREDFLAGS} \
 	-o $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX \
 	$$ALLSYMSFLAGS $$SHOBJECTS $$NOALLSYMSFLAGS $$LIBDEPS \
-  ) && $(SYMLINK_SO); \
-  ( $(SET_X); rm -f lib$(LIBNAME).exp )
+  ) && $(SYMLINK_SO)
 
 SYMLINK_SO=	\
 	if [ -n "$$INHIBIT_SYMLINKS" ]; then :; else \
@@ -144,7 +144,7 @@ LINK_SO_A_UNPACKED=	\
   SHOBJECTS=$$UNPACKDIR/*.o; \
   $(LINK_SO) && rm -rf $$UNPACKDIR
 
-DETECT_GNU_LD=(${CC} -Wl,-V /dev/null 2>&1 | grep '^GNU ld' )>/dev/null
+DETECT_GNU_LD=($(CC) -Wl,-V /dev/null 2>&1 | grep '^GNU ld' )>/dev/null
 
 DO_GNU_SO=$(CALC_VERSIONS); \
 	SHLIB=lib$(LIBNAME).so; \
@@ -170,8 +170,19 @@ link_a.gnu:
 link_app.gnu:
 	@ $(DO_GNU_APP); $(LINK_APP)
 
+DO_BEOS_SO=	SHLIB=lib$(LIBNAME).so; \
+	SHLIB_SUFFIX=; \
+	ALLSYMSFLAGS='-Wl,--whole-archive'; \
+	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-Bsymbolic -Wl,-soname=$$SHLIB$$SHLIB_SUFFIX"
+
+link_o.beos:
+	@ $(DO_BEOS_SO); $(LINK_SO_O)
+link_a.beos:
+	@ $(DO_BEOS_SO); $(LINK_SO_A)
+
 link_o.bsd:
-	@if ${DETECT_GNU_LD}; then $(DO_GNU_SO); else \
+	@if $(DETECT_GNU_LD); then $(DO_GNU_SO); else \
 	$(CALC_VERSIONS); \
 	SHLIB=lib$(LIBNAME).so; \
 	SHLIB_SUFFIX=; \
@@ -181,7 +192,7 @@ link_o.bsd:
 	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -nostdlib"; \
 	fi; $(LINK_SO_O)
 link_a.bsd:
-	@if ${DETECT_GNU_LD}; then $(DO_GNU_SO); else \
+	@if $(DETECT_GNU_LD); then $(DO_GNU_SO); else \
 	$(CALC_VERSIONS); \
 	SHLIB=lib$(LIBNAME).so; \
 	SHLIB_SUFFIX=; \
@@ -191,7 +202,7 @@ link_a.bsd:
 	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -nostdlib"; \
 	fi; $(LINK_SO_A)
 link_app.bsd:
-	@if ${DETECT_GNU_LD}; then $(DO_GNU_APP); else \
+	@if $(DETECT_GNU_LD); then $(DO_GNU_APP); else \
 	LDFLAGS="$(CFLAGS) -Wl,-rpath,$(LIBPATH)"; \
 	fi; $(LINK_APP)
 
@@ -227,7 +238,7 @@ link_a.darwin:
 	if [ -n "$$SHLIB_SOVER_NODOT" ]; then \
 		SHAREDFLAGS="$$SHAREDFLAGS -compatibility_version $$SHLIB_SOVER_NODOT"; \
 	fi; \
-	SHAREDFLAGS="$$SHAREDFLAGS -install_name ${INSTALLTOP}/lib/$$SHLIB${SHLIB_EXT}"; \
+	SHAREDFLAGS="$$SHAREDFLAGS -install_name $(INSTALLTOP)/$(LIBDIR)/$$SHLIB$(SHLIB_EXT)"; \
 	$(LINK_SO_A)
 link_app.darwin:	# is there run-path on darwin?
 	$(LINK_APP)
@@ -237,40 +248,59 @@ link_o.cygwin:
 	INHIBIT_SYMLINKS=yes; \
 	SHLIB=cyg$(LIBNAME); \
 	base=-Wl,--enable-auto-image-base; \
+	deffile=; \
 	if expr $(PLATFORM) : 'mingw' > /dev/null; then \
 		SHLIB=$(LIBNAME)eay32; base=; \
+		if test -f $(LIBNAME)eay32.def; then \
+			deffile=$(LIBNAME)eay32.def; \
+		fi; \
 	fi; \
 	SHLIB_SUFFIX=.dll; \
 	LIBVERSION="$(LIBVERSION)"; \
 	SHLIB_SOVER=${LIBVERSION:+"-$(LIBVERSION)"}; \
 	ALLSYMSFLAGS='-Wl,--whole-archive'; \
 	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared $$base -Wl,-Bsymbolic -Wl,--out-implib,lib$(LIBNAME).dll.a"; \
+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared $$base $$deffile -Wl,-s,-Bsymbolic"; \
 	$(LINK_SO_O)
+#for mingw target if def-file is in use dll-name should match library-name
 link_a.cygwin:
 	@ $(CALC_VERSIONS); \
 	INHIBIT_SYMLINKS=yes; \
-	SHLIB=cyg$(LIBNAME); \
+	SHLIB=cyg$(LIBNAME); SHLIB_SOVER=-$(LIBVERSION); SHLIB_SUFFIX=.dll; \
+	dll_name=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX; extras=; \
 	base=-Wl,--enable-auto-image-base; \
 	if expr $(PLATFORM) : 'mingw' > /dev/null; then \
-		SHLIB=$(LIBNAME)eay32; \
-		base=;  [ $(LIBNAME) = "crypto" ] && base=-Wl,--image-base,0x63000000; \
+		case $(LIBNAME) in \
+			crypto) SHLIB=libeay;; \
+			ssl) SHLIB=ssleay;; \
+		esac; \
+		SHLIB_SOVER=32; \
+		extras="$(LIBNAME).def"; \
+		$(PERL) util/mkdef.pl 32 $$SHLIB > $$extras; \
+		base=; [ $(LIBNAME) = "crypto" ] && base=-Wl,--image-base,0x63000000; \
 	fi; \
-	SHLIB_SUFFIX=.dll; \
-	SHLIB_SOVER=-$(LIBVERSION); \
+	dll_name=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX; \
+	$(PERL) util/mkrc.pl $$dll_name | \
+		$(CROSS_COMPILE)windres -o rc.o; \
+	extras="$$extras rc.o"; \
 	ALLSYMSFLAGS='-Wl,--whole-archive'; \
 	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared $$base -Wl,-Bsymbolic -Wl,--out-implib,lib$(LIBNAME).dll.a"; \
-	[ -f apps/$$SHLIB$$SHLIB_SUFFIX ] && rm apps/$$SHLIB$$SHLIB_SUFFIX; \
-	[ -f test/$$SHLIB$$SHLIB_SUFFIX ] && rm test/$$SHLIB$$SHLIB_SUFFIX; \
+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared $$base -Wl,-s,-Bsymbolic -Wl,--out-implib,lib$(LIBNAME).dll.a $$extras"; \
+	[ -f apps/$$dll_name ] && rm apps/$$dll_name; \
+	[ -f test/$$dll_name ] && rm test/$$dll_name; \
 	$(LINK_SO_A) || exit 1; \
-	cp -p $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX apps/; \
-	cp -p $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX test/
+	rm $$extras; \
+	cp -p $$dll_name apps/; \
+	cp -p $$dll_name test/
 link_app.cygwin:
+	@if expr "$(CFLAGS)" : '.*OPENSSL_USE_APPLINK' > /dev/null; then \
+		LIBDEPS="$(TOP)/crypto/applink.o $${LIBDEPS:-$(LIBDEPS)}"; \
+		export LIBDEPS; \
+	fi; \
 	$(LINK_APP)
 
 link_o.alpha-osf1:
-	@ if ${DETECT_GNU_LD}; then \
+	@ if $(DETECT_GNU_LD); then \
 		$(DO_GNU_SO); \
 	else \
 		SHLIB=lib$(LIBNAME).so; \
@@ -291,7 +321,7 @@ link_o.alpha-osf1:
 	fi; \
 	$(LINK_SO_O)
 link_a.alpha-osf1:
-	@ if ${DETECT_GNU_LD}; then \
+	@ if $(DETECT_GNU_LD); then \
 		$(DO_GNU_SO); \
 	else \
 		SHLIB=lib$(LIBNAME).so; \
@@ -312,7 +342,7 @@ link_a.alpha-osf1:
 	fi; \
 	$(LINK_SO_A)
 link_app.alpha-osf1:
-	@if ${DETECT_GNU_LD}; then \
+	@if $(DETECT_GNU_LD); then \
 		$(DO_GNU_APP); \
 	else \
 		LDFLAGS="$(CFLAGS) -rpath $(LIBRPATH)"; \
@@ -320,7 +350,7 @@ link_app.alpha-osf1:
 	$(LINK_APP)
 
 link_o.solaris:
-	@ if ${DETECT_GNU_LD}; then \
+	@ if $(DETECT_GNU_LD); then \
 		$(DO_GNU_SO); \
 	else \
 		$(CALC_VERSIONS); \
@@ -334,12 +364,12 @@ link_o.solaris:
 	fi; \
 	$(LINK_SO_O)
 link_a.solaris:
-	@ if ${DETECT_GNU_LD}; then \
+	@ if $(DETECT_GNU_LD); then \
 		$(DO_GNU_SO); \
 	else \
 		$(CALC_VERSIONS); \
 		MINUSZ='-z '; \
-		(${CC} -v 2>&1 | grep gcc) > /dev/null && MINUSZ='-Wl,-z,'; \
+		($(CC) -v 2>&1 | grep gcc) > /dev/null && MINUSZ='-Wl,-z,'; \
 		SHLIB=lib$(LIBNAME).so; \
 		SHLIB_SUFFIX=;\
 		ALLSYMSFLAGS="$${MINUSZ}allextract"; \
@@ -348,7 +378,7 @@ link_a.solaris:
 	fi; \
 	$(LINK_SO_A)
 link_app.solaris:
-	@ if ${DETECT_GNU_LD}; then \
+	@ if $(DETECT_GNU_LD); then \
 		$(DO_GNU_APP); \
 	else \
 		LDFLAGS="$(CFLAGS) -R $(LIBRPATH)"; \
@@ -357,7 +387,7 @@ link_app.solaris:
 
 # OpenServer 5 native compilers used
 link_o.svr3:
-	@ if ${DETECT_GNU_LD}; then \
+	@ if $(DETECT_GNU_LD); then \
 		$(DO_GNU_SO); \
 	else \
 		$(CALC_VERSIONS); \
@@ -369,7 +399,7 @@ link_o.svr3:
 	fi; \
 	$(LINK_SO_O)
 link_a.svr3:
-	@ if ${DETECT_GNU_LD}; then \
+	@ if $(DETECT_GNU_LD); then \
 		$(DO_GNU_SO); \
 	else \
 		$(CALC_VERSIONS); \
@@ -381,12 +411,12 @@ link_a.svr3:
 	fi; \
 	$(LINK_SO_A_UNPACKED)
 link_app.svr3:
-	@${DETECT_GNU_LD} && $(DO_GNU_APP); \
+	@$(DETECT_GNU_LD) && $(DO_GNU_APP); \
 	$(LINK_APP)
 
 # UnixWare 7 and OpenUNIX 8 native compilers used
 link_o.svr5:
-	@ if ${DETECT_GNU_LD}; then \
+	@ if $(DETECT_GNU_LD); then \
 		$(DO_GNU_SO); \
 	else \
 		$(CALC_VERSIONS); \
@@ -400,12 +430,12 @@ link_o.svr5:
 	fi; \
 	$(LINK_SO_O)
 link_a.svr5:
-	@ if ${DETECT_GNU_LD}; then \
+	@ if $(DETECT_GNU_LD); then \
 		$(DO_GNU_SO); \
 	else \
 		$(CALC_VERSIONS); \
 		SHARE_FLAG='-G'; \
-		(${CC} -v 2>&1 | grep gcc) > /dev/null && SHARE_FLAG='-shared'; \
+		($(CC) -v 2>&1 | grep gcc) > /dev/null && SHARE_FLAG='-shared'; \
 		SHLIB=lib$(LIBNAME).so; \
 		SHLIB_SUFFIX=; \
 		ALLSYMSFLAGS=''; \
@@ -414,11 +444,11 @@ link_a.svr5:
 	fi; \
 	$(LINK_SO_A_UNPACKED)
 link_app.svr5:
-	@${DETECT_GNU_LD} && $(DO_GNU_APP); \
+	@$(DETECT_GNU_LD) && $(DO_GNU_APP); \
 	$(LINK_APP)
 
 link_o.irix:
-	@ if ${DETECT_GNU_LD}; then \
+	@ if $(DETECT_GNU_LD); then \
 		$(DO_GNU_SO); \
 	else \
 		$(CALC_VERSIONS); \
@@ -432,7 +462,7 @@ link_o.irix:
 	fi; \
 	$(LINK_SO_O)
 link_a.irix:
-	@ if ${DETECT_GNU_LD}; then \
+	@ if $(DETECT_GNU_LD); then \
 		$(DO_GNU_SO); \
 	else \
 		$(CALC_VERSIONS); \
@@ -458,7 +488,7 @@ link_app.irix:
 # ELFs by the way].
 #
 link_o.hpux:
-	@if ${DETECT_GNU_LD}; then $(DO_GNU_SO); else \
+	@if $(DETECT_GNU_LD); then $(DO_GNU_SO); else \
 	$(CALC_VERSIONS); \
 	SHLIB=lib$(LIBNAME).sl; \
 	expr "$(CFLAGS)" : '.*DSO_DLFCN' > /dev/null && SHLIB=lib$(LIBNAME).so; \
@@ -471,7 +501,7 @@ link_o.hpux:
 	rm -f $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX || :; \
 	$(LINK_SO_O) && chmod a=rx $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX
 link_a.hpux:
-	@if ${DETECT_GNU_LD}; then $(DO_GNU_SO); else \
+	@if $(DETECT_GNU_LD); then $(DO_GNU_SO); else \
 	$(CALC_VERSIONS); \
 	SHLIB=lib$(LIBNAME).sl; \
 	expr $(PLATFORM) : '.*ia64' > /dev/null && SHLIB=lib$(LIBNAME).so; \
@@ -484,30 +514,30 @@ link_a.hpux:
 	rm -f $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX || :; \
 	$(LINK_SO_A) && chmod a=rx $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX
 link_app.hpux:
-	@if ${DETECT_GNU_LD}; then $(DO_GNU_APP); else \
+	@if $(DETECT_GNU_LD); then $(DO_GNU_APP); else \
 	LDFLAGS="$(CFLAGS) -Wl,+s,+cdp,../:,+cdp,./:,+b,$(LIBRPATH)"; \
 	fi; \
 	$(LINK_APP)
 
 link_o.aix:
 	@ $(CALC_VERSIONS); \
-	OBJECT_MODE=`expr x$(SHARED_LDFLAGS) : 'x\-[a-z]*\(64\)'` || :; \
+	OBJECT_MODE=`expr "x$(SHARED_LDFLAGS)" : 'x\-[a-z]*\(64\)'` || :; \
 	OBJECT_MODE=$${OBJECT_MODE:-32}; export OBJECT_MODE; \
 	SHLIB=lib$(LIBNAME).so; \
 	SHLIB_SUFFIX=; \
 	ALLSYMSFLAGS=''; \
 	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS='$(CFLAGS) $(SHARED_LDFLAGS) -Wl,-G,-bexpall,-bnolibpath,-bM:SRE'; \
+	SHAREDFLAGS='$(CFLAGS) $(SHARED_LDFLAGS) -Wl,-bexpall,-bnolibpath,-bM:SRE'; \
 	$(LINK_SO_O);
 link_a.aix:
 	@ $(CALC_VERSIONS); \
-	OBJECT_MODE=`expr x$(SHARED_LDFLAGS) : 'x\-[a-z]*\(64\)'` || : ; \
+	OBJECT_MODE=`expr "x$(SHARED_LDFLAGS)" : 'x\-[a-z]*\(64\)'` || : ; \
 	OBJECT_MODE=$${OBJECT_MODE:-32}; export OBJECT_MODE; \
 	SHLIB=lib$(LIBNAME).so; \
 	SHLIB_SUFFIX=; \
 	ALLSYMSFLAGS='-bnogc'; \
 	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS='$(CFLAGS) $(SHARED_LDFLAGS) -Wl,-G,-bexpall,-bnolibpath,-bM:SRE'; \
+	SHAREDFLAGS='$(CFLAGS) $(SHARED_LDFLAGS) -Wl,-bexpall,-bnolibpath,-bM:SRE'; \
 	$(LINK_SO_A_VIA_O)
 link_app.aix:
 	LDFLAGS="$(CFLAGS) -Wl,-brtl,-blibpath:$(LIBRPATH):$${LIBPATH:-/usr/lib:/lib}"; \
@@ -549,7 +579,7 @@ symlink.hpux:
 	expr $(PLATFORM) : '.*ia64' > /dev/null && SHLIB=lib$(LIBNAME).so; \
 	$(SYMLINK_SO)
 # The following lines means those specific architectures do no symlinks
-symlink.cygwin symlink.alpha-osf1 symlink.tru64 symlink.tru64-rpath:
+symlink.cygwin symlink.alpha-osf1 symlink.tru64 symlink.tru64-rpath symlink.beos:
 
 # Compatibility targets
 link_o.bsd-gcc-shared link_o.linux-shared link_o.gnu-shared: link_o.gnu
@@ -607,3 +637,7 @@ link_o.reliantunix-shared: link_o.reliantunix
 link_a.reliantunix-shared: link_a.reliantunix
 link_app.reliantunix-shared: link_app.reliantunix
 symlink.reliantunix-shared: symlink.reliantunix
+link_o.beos-shared: link_o.beos
+link_a.beos-shared: link_a.beos
+link_app.beos-shared: link_app.gnu
+symlink.beos-shared: symlink.beos

NEWS

@@ -5,6 +5,52 @@
   This file gives a brief overview of the major changes between each OpenSSL
   release. For more details please read the CHANGES file.
 
+  Major changes between OpenSSL 0.9.8k and OpenSSL 1.0:
+
+
+      o RFC3280 path validation: sufficient to process PKITS tests.
+      o Integrated support for PVK files and keyblobs.
+      o Change default private key format to PKCS#8.
+      o CMS support: able to process all examples in RFC4134
+      o Streaming ASN1 encode support for PKCS#7 and CMS.
+      o Multiple signer and signer add support for PKCS#7 and CMS.
+      o ASN1 printing support.
+      o Whirlpool hash algorithm added.
+      o RFC3161 time stamp support.
+      o New generalised public key API supporting ENGINE based algorithms.
+      o New generalised public key API utilities.
+      o New ENGINE supporting GOST algorithms.
+      o SSL/TLS GOST ciphersuite support.
+      o PKCS#7 and CMS GOST support.
+      o RFC4279 PSK ciphersuite support.
+      o Supported points format extension for ECC ciphersuites.
+      o ecdsa-with-SHA224/256/384/512 signature types.
+      o dsa-with-SHA224 and dsa-with-SHA256 signature types.
+      o Opaque PRF Input TLS extension support.
+      o Updated time routines to avoid OS limitations.
+
+  Major changes between OpenSSL 0.9.8j and OpenSSL 0.9.8k:
+
+      o Fix various build issues.
+      o Fix security issues (CVE-2009-0590, CVE-2009-0591, CVE-2009-0789)
+
+  Major changes between OpenSSL 0.9.8i and OpenSSL 0.9.8j:
+
+      o Fix security issue (CVE-2008-5077)
+      o Merge FIPS 140-2 branch code.
+
+  Major changes between OpenSSL 0.9.8g and OpenSSL 0.9.8h:
+
+      o CryptoAPI ENGINE support.
+      o Various precautionary measures.
+      o Fix for bugs affecting certificate request creation.
+      o Support for local machine keyset attribute in PKCS#12 files.
+
+  Major changes between OpenSSL 0.9.8f and OpenSSL 0.9.8g:
+
+      o Backport of CMS functionality to 0.9.8.
+      o Fixes for bugs introduced with 0.9.8f.
+
   Major changes between OpenSSL 0.9.8e and OpenSSL 0.9.8f:
 
       o Add gcc 4.2 support.
@@ -121,6 +167,11 @@
       o Added initial support for Win64.
       o Added alternate pkg-config files.
 
+  Major changes between OpenSSL 0.9.7l and OpenSSL 0.9.7m:
+
+      o FIPS 1.1.1 module linking.
+      o Various ciphersuite selection fixes.
+
   Major changes between OpenSSL 0.9.7k and OpenSSL 0.9.7l:
 
       o Introduce limits to prevent malicious key DoS  (CVE-2006-2940)

Netware/build.bat

@@ -7,8 +7,9 @@ rem   usage:
 rem      build [target] [debug opts] [assembly opts] [configure opts]
 rem
 rem      target        - "netware-clib" - CLib NetWare build (WinSock Sockets)
-rem                    - "netware-libc" - LibC NKS NetWare build (WinSock Sockets)
-rem                    - "netware-libc-bsdsock" - LibC NKS NetWare build (BSD Sockets)
+rem                    - "netware-clib-bsdsock" - CLib NetWare build (BSD Sockets)
+rem                    - "netware-libc" - LibC NetWare build (WinSock Sockets)
+rem                    - "netware-libc-bsdsock" - LibC NetWare build (BSD Sockets)
 rem 
 rem      debug opts    - "debug"  - build debug
 rem
@@ -71,10 +72,12 @@ if "%1" == "nw-nasm"  set NO_ASM=
 if "%1" == "nw-nasm"  set ARG_PROCESSED=YES
 if "%1" == "nw-mwasm" set ASM_MODE=nw-mwasm
 if "%1" == "nw-mwasm" set ASSEMBLER=Metrowerks
-if "%1" == "nw-mwasm"  set NO_ASM=
+if "%1" == "nw-mwasm" set NO_ASM=
 if "%1" == "nw-mwasm" set ARG_PROCESSED=YES
 if "%1" == "netware-clib" set BLD_TARGET=netware-clib
 if "%1" == "netware-clib" set ARG_PROCESSED=YES
+if "%1" == "netware-clib-bsdsock" set BLD_TARGET=netware-clib-bsdsock
+if "%1" == "netware-clib-bsdsock" set ARG_PROCESSED=YES
 if "%1" == "netware-libc" set BLD_TARGET=netware-libc
 if "%1" == "netware-libc" set ARG_PROCESSED=YES
 if "%1" == "netware-libc-bsdsock" set BLD_TARGET=netware-libc-bsdsock
@@ -94,6 +97,7 @@ if "%BLD_TARGET%" == "no_target" goto no_target
 rem build the nlm make file name which includes target and debug info
 set NLM_MAKE=
 if "%BLD_TARGET%" == "netware-clib" set NLM_MAKE=netware\nlm_clib
+if "%BLD_TARGET%" == "netware-clib-bsdsock" set NLM_MAKE=netware\nlm_clib_bsdsock
 if "%BLD_TARGET%" == "netware-libc" set NLM_MAKE=netware\nlm_libc
 if "%BLD_TARGET%" == "netware-libc-bsdsock" set NLM_MAKE=netware\nlm_libc_bsdsock
 if "%DEBUG%" == "" set NLM_MAKE=%NLM_MAKE%.mak
@@ -110,7 +114,14 @@ echo Generating x86 for %ASSEMBLER% assembler
 
 echo Bignum
 cd crypto\bn\asm
-perl x86.pl %ASM_MODE% > bn-nw.asm
+rem perl x86.pl %ASM_MODE% > bn-nw.asm
+perl bn-586.pl %ASM_MODE% > bn-nw.asm
+perl co-586.pl %ASM_MODE% > co-nw.asm
+cd ..\..\..
+
+echo AES
+cd crypto\aes\asm
+perl aes-586.pl %ASM_MODE% > a-nw.asm
 cd ..\..\..
 
 echo DES
@@ -148,6 +159,8 @@ cd ..\..\..
 echo SHA1
 cd crypto\sha\asm
 perl sha1-586.pl %ASM_MODE% > s1-nw.asm
+perl sha256-586.pl %ASM_MODE% > sha256-nw.asm
+perl sha512-586.pl %ASM_MODE% > sha512-nw.asm
 cd ..\..\..
 
 echo RIPEMD160
@@ -160,6 +173,16 @@ cd crypto\rc5\asm
 perl rc5-586.pl %ASM_MODE% > r5-nw.asm
 cd ..\..\..
 
+echo WHIRLPOOL
+cd crypto\whrlpool\asm
+perl wp-mmx.pl %ASM_MODE% > wp-nw.asm
+cd ..\..\..
+
+echo CPUID
+cd crypto
+perl x86cpuid.pl %ASM_MODE% > x86cpuid-nw.asm
+cd ..\
+
 rem ===============================================================
 rem
 :do_config
@@ -176,8 +199,10 @@ echo mk1mf.pl options: %DEBUG% %ASM_MODE% %CONFIG_OPTS% %BLD_TARGET%
 echo .
 perl util\mk1mf.pl %DEBUG% %ASM_MODE% %CONFIG_OPTS% %BLD_TARGET% >%NLM_MAKE%
 
+make -f %NLM_MAKE% vclean
+echo .
 echo The makefile "%NLM_MAKE%" has been created use your maketool to
-echo build (ex: gmake -f %NLM_MAKE%)
+echo build (ex: make -f %NLM_MAKE%)
 goto end
 
 rem ===============================================================
@@ -189,8 +214,9 @@ echo .
 echo .  usage: build [target] [debug opts] [assembly opts] [configure opts]
 echo .
 echo .     target        - "netware-clib" - CLib NetWare build (WinSock Sockets)
-echo .                   - "netware-libc" - LibC NKS NetWare build (WinSock Sockets)
-echo .                   - "netware-libc-bsdsock" - LibC NKS NetWare build (BSD Sockets)
+echo .                   - "netware-clib-bsdsock" - CLib NetWare build (BSD Sockets)
+echo .                   - "netware-libc" - LibC NetWare build (WinSock Sockets)
+echo .                   - "netware-libc-bsdsock" - LibC NetWare build (BSD Sockets)
 echo .
 echo .     debug opts    - "debug"  - build debug
 echo .

Netware/cpy_tests.bat

@@ -73,6 +73,7 @@ copy %loc%\test\testsid.pem   %2\openssl\test\
 copy %loc%\test\testx509.pem  %2\openssl\test\
 copy %loc%\test\v3-cert1.pem  %2\openssl\test\
 copy %loc%\test\v3-cert2.pem  %2\openssl\test\
+copy %loc%\crypto\evp\evptests.txt %2\openssl\test\
 
 rem   copy the apps directory stuff
 copy %loc%\apps\client.pem    %2\openssl\apps\

Netware/do_tests.pl

@@ -34,12 +34,17 @@ sub main()
    # delete all the output files in the output directory
    unlink <$output_path\\*.*>;
 
-   # open the main log file 
+   # open the main log file
    open(OUT, ">$log_file") || die "unable to open $log_file\n";
 
-   
+   print( OUT "========================================================\n");
+   my $outFile = "$output_path\\version.out";
+   system("openssl2 version (CLIB_OPT)/>$outFile");
+   log_output("CHECKING FOR OPENSSL VERSION:", $outFile);
+
    algorithm_tests();
    encryption_tests();
+   evp_tests();
    pem_tests();
    verify_tests();
    ca_tests();
@@ -56,9 +61,10 @@ sub algorithm_tests
 {
    my $i;
    my $outFile;
-   my @tests = ( rsa_test, destest, ideatest, bftest, shatest, sha1test,
-                 md5test, dsatest, md2test, mdc2test, rc2test, rc4test, randtest,
-                 dhtest, exptest );
+   my @tests = ( rsa_test, destest, ideatest, bftest, bntest, shatest, sha1test,
+                 sha256t, sha512t, dsatest, md2test, md4test, md5test, mdc2test,
+                 rc2test, rc4test, rc5test, randtest, rmdtest, dhtest, ecdhtest,
+                 ecdsatest, ectest, exptest, casttest, hmactest );
 
    print( "\nRUNNING CRYPTO ALGORITHM TESTS:\n\n");
 
@@ -68,16 +74,16 @@ sub algorithm_tests
    foreach $i (@tests)
    {
       if (-e "$base_path\\$i.nlm")
-	  {
+      {
          $outFile = "$output_path\\$i.out";
-         system("$i > $outFile");
+         system("$i (CLIB_OPT)/>$outFile");
          log_desc("Test: $i\.nlm:");
          log_output("", $outFile );
-	  }
-	  else
-	  {
+      }
+      else
+      {
          log_desc("Test: $i\.nlm: file not found");
-	  }
+      }
    }
 }
 
@@ -109,24 +115,24 @@ sub encryption_tests
 
       # do encryption
       $outFile = "$output_path\\enc.out";
-      system("openssl2 $i -e -bufsize 113 -k test -in $input -out $cipher > $outFile" );
+      system("openssl2 $i -e -bufsize 113 -k test -in $input -out $cipher (CLIB_OPT)/>$outFile" );
       log_output("Encrypting: $input --> $cipher", $outFile);
 
       # do decryption
       $outFile = "$output_path\\dec.out";
-      system("openssl2 $i -d -bufsize 157 -k test -in $cipher -out $clear > $outFile");
+      system("openssl2 $i -d -bufsize 157 -k test -in $cipher -out $clear (CLIB_OPT)/>$outFile");
       log_output("Decrypting: $cipher --> $clear", $outFile);
 
       # compare files
       $x = compare_files( $input, $clear, 1);
       if ( $x == 0 )
       {
-         print( "SUCCESS - files match: $input, $clear\n");
+         print( "\rSUCCESS - files match: $input, $clear\n");
          print( OUT "SUCCESS - files match: $input, $clear\n");
       }
       else
       {
-         print( "ERROR: files don't match\n");
+         print( "\rERROR: files don't match\n");
          print( OUT "ERROR: files don't match\n");
       }
 
@@ -136,24 +142,24 @@ sub encryption_tests
 
       # do encryption B64
       $outFile = "$output_path\\B64enc.out";
-      system("openssl2 $i -a -e -bufsize 113 -k test -in $input -out $cipher > $outFile");
+      system("openssl2 $i -a -e -bufsize 113 -k test -in $input -out $cipher (CLIB_OPT)/>$outFile");
       log_output("Encrypting(B64): $cipher --> $clear", $outFile);
 
       # do decryption B64
       $outFile = "$output_path\\B64dec.out";
-      system("openssl2 $i -a -d -bufsize 157 -k test -in $cipher -out $clear > $outFile");
+      system("openssl2 $i -a -d -bufsize 157 -k test -in $cipher -out $clear (CLIB_OPT)/>$outFile");
       log_output("Decrypting(B64): $cipher --> $clear", $outFile);
 
       # compare files
       $x = compare_files( $input, $clear, 1);
       if ( $x == 0 )
       {
-         print( "SUCCESS - files match: $input, $clear\n");
+         print( "\rSUCCESS - files match: $input, $clear\n");
          print( OUT "SUCCESS - files match: $input, $clear\n");
       }
       else
       {
-         print( "ERROR: files don't match\n");
+         print( "\rERROR: files don't match\n");
          print( OUT "ERROR: files don't match\n");
       }
 
@@ -199,24 +205,24 @@ sub pem_tests
 
       if ($i ne "req" )
       {
-         system("openssl2 $i -in $input -out $tmp_out > $outFile");
+         system("openssl2 $i -in $input -out $tmp_out (CLIB_OPT)/>$outFile");
          log_output( "openssl2 $i -in $input -out $tmp_out", $outFile);
       }
       else
       {
-         system("openssl2 $i -in $input -out $tmp_out -config $OpenSSL_config > $outFile");
+         system("openssl2 $i -in $input -out $tmp_out -config $OpenSSL_config (CLIB_OPT)/>$outFile");
          log_output( "openssl2 $i -in $input -out $tmp_out -config $OpenSSL_config", $outFile );
       }
 
       $x = compare_files( $input, $tmp_out);
       if ( $x == 0 )
       {
-         print( "SUCCESS - files match: $input, $tmp_out\n");
+         print( "\rSUCCESS - files match: $input, $tmp_out\n");
          print( OUT "SUCCESS - files match: $input, $tmp_out\n");
       }
       else
       {
-         print( "ERROR: files don't match\n");
+         print( "\rERROR: files don't match\n");
          print( OUT "ERROR: files don't match\n");
       }
       do_wait();
@@ -231,7 +237,8 @@ sub verify_tests
    my $i;
    my $outFile = "$output_path\\verify.out";
 
-   my @cert_files = <$cert_path\\*.pem>;
+   $cert_path =~ s/\\/\//g;
+   my @cert_files = <$cert_path/*.pem>;
 
    print( "\nRUNNING VERIFY TESTS:\n\n");
 
@@ -242,7 +249,7 @@ sub verify_tests
 
    foreach $i (@cert_files)
    {
-      system("openssl2 verify -CAfile $tmp_cert $i >$outFile");
+      system("openssl2 verify -CAfile $tmp_cert $i (CLIB_OPT)/>$outFile");
       log_desc("Verifying cert: $i");
       log_output("openssl2 verify -CAfile $tmp_cert $i", $outFile);
    }
@@ -263,103 +270,103 @@ sub ssl_tests
    print( OUT "\n========================================================\n");
    print( OUT "SSL TESTS:\n\n");
 
-   system("ssltest -ssl2 >$outFile");
+   system("ssltest -ssl2 (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv2:");
    log_output("ssltest -ssl2", $outFile);
 
-   system("$ssltest -ssl2 -server_auth >$outFile");
+   system("$ssltest -ssl2 -server_auth (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv2 with server authentication:");
    log_output("$ssltest -ssl2 -server_auth", $outFile);
 
-   system("$ssltest -ssl2 -client_auth >$outFile");
+   system("$ssltest -ssl2 -client_auth (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv2 with client authentication:");
    log_output("$ssltest -ssl2 -client_auth", $outFile);
 
-   system("$ssltest -ssl2 -server_auth -client_auth >$outFile");
+   system("$ssltest -ssl2 -server_auth -client_auth (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv2 with both client and server authentication:");
    log_output("$ssltest -ssl2 -server_auth -client_auth", $outFile);
 
-   system("ssltest -ssl3 >$outFile");
+   system("ssltest -ssl3 (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv3:");
    log_output("ssltest -ssl3", $outFile);
 
-   system("$ssltest -ssl3 -server_auth >$outFile");
+   system("$ssltest -ssl3 -server_auth (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv3 with server authentication:");
    log_output("$ssltest -ssl3 -server_auth", $outFile);
 
-   system("$ssltest -ssl3 -client_auth >$outFile");
+   system("$ssltest -ssl3 -client_auth (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv3 with client authentication:");
    log_output("$ssltest -ssl3 -client_auth", $outFile);
 
-   system("$ssltest -ssl3 -server_auth -client_auth >$outFile");
+   system("$ssltest -ssl3 -server_auth -client_auth (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv3 with both client and server authentication:");
    log_output("$ssltest -ssl3 -server_auth -client_auth", $outFile);
 
-   system("ssltest >$outFile");
+   system("ssltest (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv2/sslv3:");
    log_output("ssltest", $outFile);
 
-   system("$ssltest -server_auth >$outFile");
+   system("$ssltest -server_auth (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv2/sslv3 with server authentication:");
    log_output("$ssltest -server_auth", $outFile);
 
-   system("$ssltest -client_auth >$outFile");
+   system("$ssltest -client_auth (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv2/sslv3 with client authentication:");
    log_output("$ssltest -client_auth ", $outFile);
 
-   system("$ssltest -server_auth -client_auth >$outFile");
+   system("$ssltest -server_auth -client_auth (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv2/sslv3 with both client and server authentication:");
    log_output("$ssltest -server_auth -client_auth", $outFile);
 
-   system("ssltest -bio_pair -ssl2 >$outFile");
+   system("ssltest -bio_pair -ssl2 (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv2 via BIO pair:");
    log_output("ssltest -bio_pair -ssl2", $outFile);
 
-   system("ssltest -bio_pair -dhe1024dsa -v >$outFile");
+   system("ssltest -bio_pair -dhe1024dsa -v (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv2/sslv3 with 1024 bit DHE via BIO pair:");
    log_output("ssltest -bio_pair -dhe1024dsa -v", $outFile);
 
-   system("$ssltest -bio_pair -ssl2 -server_auth >$outFile");
+   system("$ssltest -bio_pair -ssl2 -server_auth (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv2 with server authentication via BIO pair:");
    log_output("$ssltest -bio_pair -ssl2 -server_auth", $outFile);
 
-   system("$ssltest -bio_pair -ssl2 -client_auth >$outFile");
+   system("$ssltest -bio_pair -ssl2 -client_auth (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv2 with client authentication via BIO pair:");
    log_output("$ssltest -bio_pair -ssl2 -client_auth", $outFile);
 
-   system("$ssltest -bio_pair -ssl2 -server_auth -client_auth >$outFile");
+   system("$ssltest -bio_pair -ssl2 -server_auth -client_auth (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv2 with both client and server authentication via BIO pair:");
    log_output("$ssltest -bio_pair -ssl2 -server_auth -client_auth", $outFile);
 
-   system("ssltest -bio_pair -ssl3 >$outFile");
+   system("ssltest -bio_pair -ssl3 (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv3 via BIO pair:");
    log_output("ssltest -bio_pair -ssl3", $outFile);
 
-   system("$ssltest -bio_pair -ssl3 -server_auth >$outFile");
+   system("$ssltest -bio_pair -ssl3 -server_auth (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv3 with server authentication via BIO pair:");
    log_output("$ssltest -bio_pair -ssl3 -server_auth", $outFile);
 
-   system("$ssltest -bio_pair -ssl3 -client_auth >$outFile");
+   system("$ssltest -bio_pair -ssl3 -client_auth (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv3 with client authentication  via BIO pair:");
    log_output("$ssltest -bio_pair -ssl3 -client_auth", $outFile);
 
-   system("$ssltest -bio_pair -ssl3 -server_auth -client_auth >$outFile");
+   system("$ssltest -bio_pair -ssl3 -server_auth -client_auth (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv3 with both client and server authentication via BIO pair:");
    log_output("$ssltest -bio_pair -ssl3 -server_auth -client_auth", $outFile);
 
-   system("ssltest -bio_pair >$outFile");
+   system("ssltest -bio_pair (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv2/sslv3 via BIO pair:");
    log_output("ssltest -bio_pair", $outFile);
 
-   system("$ssltest -bio_pair -server_auth >$outFile");
+   system("$ssltest -bio_pair -server_auth (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv2/sslv3 with server authentication via BIO pair:");
    log_output("$ssltest -bio_pair -server_auth", $outFile);
 
-   system("$ssltest -bio_pair -client_auth >$outFile");
+   system("$ssltest -bio_pair -client_auth (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv2/sslv3 with client authentication via BIO pair:");
    log_output("$ssltest -bio_pair -client_auth", $outFile);
 
-   system("$ssltest -bio_pair -server_auth -client_auth >$outFile");
+   system("$ssltest -bio_pair -server_auth -client_auth (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv2/sslv3 with both client and server authentication via BIO pair:");
    log_output("$ssltest -bio_pair -server_auth -client_auth", $outFile);
 }
@@ -389,43 +396,43 @@ sub ca_tests
    print( OUT "\n========================================================\n");
    print( OUT "CA TESTS:\n");
 
-   system("openssl2 req -config $CAconf -out $CAreq -keyout $CAkey -new >$outFile");
+   system("openssl2 req -config $CAconf -out $CAreq -keyout $CAkey -new (CLIB_OPT)/>$outFile");
    log_desc("Make a certificate request using req:");
    log_output("openssl2 req -config $CAconf -out $CAreq -keyout $CAkey -new", $outFile);
 
-   system("openssl2 x509 -CAcreateserial -in $CAreq -days 30 -req -out $CAcert -signkey $CAkey >$outFile");
+   system("openssl2 x509 -CAcreateserial -in $CAreq -days 30 -req -out $CAcert -signkey $CAkey (CLIB_OPT)/>$outFile");
    log_desc("Convert the certificate request into a self signed certificate using x509:");
    log_output("openssl2 x509 -CAcreateserial -in $CAreq -days 30 -req -out $CAcert -signkey $CAkey", $outFile);
 
-   system("openssl2 x509 -in $CAcert -x509toreq -signkey $CAkey -out $CAreq2 >$outFile");
+   system("openssl2 x509 -in $CAcert -x509toreq -signkey $CAkey -out $CAreq2 (CLIB_OPT)/>$outFile");
    log_desc("Convert a certificate into a certificate request using 'x509':");
    log_output("openssl2 x509 -in $CAcert -x509toreq -signkey $CAkey -out $CAreq2", $outFile);
 
-   system("openssl2 req -config $OpenSSL_config -verify -in $CAreq -noout >$outFile");
+   system("openssl2 req -config $OpenSSL_config -verify -in $CAreq -noout (CLIB_OPT)/>$outFile");
    log_output("openssl2 req -config $OpenSSL_config -verify -in $CAreq -noout", $outFile);
 
-   system("openssl2 req -config $OpenSSL_config -verify -in $CAreq2 -noout >$outFile");
+   system("openssl2 req -config $OpenSSL_config -verify -in $CAreq2 -noout (CLIB_OPT)/>$outFile");
    log_output( "openssl2 req -config $OpenSSL_config -verify -in $CAreq2 -noout", $outFile);
 
-   system("openssl2 verify -CAfile $CAcert $CAcert >$outFile");
+   system("openssl2 verify -CAfile $CAcert $CAcert (CLIB_OPT)/>$outFile");
    log_output("openssl2 verify -CAfile $CAcert $CAcert", $outFile);
 
-   system("openssl2 req -config $Uconf -out $Ureq -keyout $Ukey -new >$outFile");
+   system("openssl2 req -config $Uconf -out $Ureq -keyout $Ukey -new (CLIB_OPT)/>$outFile");
    log_desc("Make another certificate request using req:");
    log_output("openssl2 req -config $Uconf -out $Ureq -keyout $Ukey -new", $outFile);
 
-   system("openssl2 x509 -CAcreateserial -in $Ureq -days 30 -req -out $Ucert -CA $CAcert -CAkey $CAkey -CAserial $CAserial >$outFile");
+   system("openssl2 x509 -CAcreateserial -in $Ureq -days 30 -req -out $Ucert -CA $CAcert -CAkey $CAkey -CAserial $CAserial (CLIB_OPT)/>$outFile");
    log_desc("Sign certificate request with the just created CA via x509:");
    log_output("openssl2 x509 -CAcreateserial -in $Ureq -days 30 -req -out $Ucert -CA $CAcert -CAkey $CAkey -CAserial $CAserial", $outFile);
 
-   system("openssl2 verify -CAfile $CAcert $Ucert >$outFile");
+   system("openssl2 verify -CAfile $CAcert $Ucert (CLIB_OPT)/>$outFile");
    log_output("openssl2 verify -CAfile $CAcert $Ucert", $outFile);
 
-   system("openssl2 x509 -subject -issuer -startdate -enddate -noout -in $Ucert >$outFile");
+   system("openssl2 x509 -subject -issuer -startdate -enddate -noout -in $Ucert (CLIB_OPT)/>$outFile");
    log_desc("Certificate details");
    log_output("openssl2 x509 -subject -issuer -startdate -enddate -noout -in $Ucert", $outFile);
 
-   print(OUT "-- \n");
+   print(OUT "--\n");
    print(OUT "The generated CA certificate is $CAcert\n");
    print(OUT "The generated CA private key is $CAkey\n");
    print(OUT "The current CA signing serial number is in $CAserial\n");
@@ -435,6 +442,29 @@ sub ca_tests
    print(OUT "--\n");
 }
 
+############################################################################
+sub evp_tests
+{
+   my $i = 'evp_test';
+
+   print( "\nRUNNING EVP TESTS:\n\n");
+
+   print( OUT "\n========================================================\n");
+   print( OUT "EVP TESTS:\n\n");
+
+   if (-e "$base_path\\$i.nlm")
+   {
+       my $outFile = "$output_path\\$i.out";
+       system("$i $test_path\\evptests.txt (CLIB_OPT)/>$outFile");
+       log_desc("Test: $i\.nlm:");
+       log_output("", $outFile );
+   }
+   else
+   {
+       log_desc("Test: $i\.nlm: file not found");
+   }
+}
+
 ############################################################################
 sub log_output( $ $ )
 {
@@ -445,7 +475,7 @@ sub log_output( $ $ )
 
    if ($desc)
    {
-      print("$desc\n");
+      print("\r$desc\n");
       print(OUT "$desc\n");
    }
 
@@ -457,8 +487,8 @@ sub log_output( $ $ )
       # copy test output to log file
    open(IN, "<$file");
    while (<IN>)
-   { 
-      print(OUT $_); 
+   {
+      print(OUT $_);
       if ( $_ =~ /ERROR/ )
       {
          $error = 1;
@@ -485,13 +515,13 @@ sub log_output( $ $ )
       $key = getc;
       print("\n");
    }
-      
-      # Several of the testing scripts run a loop loading the 
+
+      # Several of the testing scripts run a loop loading the
       # same NLM with different options.
-      # On slow NetWare machines there appears to be some delay in the 
+      # On slow NetWare machines there appears to be some delay in the
       # OS actually unloading the test nlms and the OS complains about.
-      # the NLM already being loaded.  This additional pause is to 
-      # to help provide a little more time for unloading before trying to 
+      # the NLM already being loaded.  This additional pause is to
+      # to help provide a little more time for unloading before trying to
       # load again.
    sleep(1);
 }
@@ -562,7 +592,7 @@ sub do_wait()
 ############################################################################
 sub make_tmp_cert_file()
 {
-   my @cert_files = <$cert_path\\*.pem>;
+   my @cert_files = <$cert_path/*.pem>;
 
       # delete the file if it already exists
    unlink($tmp_cert);
@@ -570,7 +600,7 @@ sub make_tmp_cert_file()
    open( TMP_CERT, ">$tmp_cert") || die "\nunable to open $tmp_cert\n";
 
    print("building temporary cert file\n");
-   
+
    # create a temporary cert file that contains all the certs
    foreach $i (@cert_files)
    {

Netware/set_env.bat

@@ -16,75 +16,97 @@ if "a%1" == "a" goto usage
                
 set LIBC_BUILD=
 set CLIB_BUILD=
+set GNUC=
 
 if "%1" == "netware-clib" set CLIB_BUILD=Y
 if "%1" == "netware-clib" set LIBC_BUILD=
 
-if "%1" == "netware-libc"  set LIBC_BUILD=Y
-if "%1" == "netware-libc"  set CLIB_BUILD=
+if "%1" == "netware-libc" set LIBC_BUILD=Y
+if "%1" == "netware-libc" set CLIB_BUILD=
+
+if "%2" == "gnuc" set GNUC=Y
+if "%2" == "codewarrior" set GNUC=
 
 rem   Location of tools (compiler, linker, etc)
-set TOOLS=d:\i_drive\tools
+if "%NDKBASE%" == "" set NDKBASE=c:\Novell
 
 rem   If Perl for Win32 is not already in your path, add it here
 set PERL_PATH=
 
 rem   Define path to the Metrowerks command line tools
+rem   or GNU Crosscompiler gcc / nlmconv
 rem   ( compiler, assembler, linker)
-set METROWERKS_PATH=%TOOLS%\codewar\pdk_21\tools\command line tools
-rem set METROWERKS_PATH=%TOOLS%\codewar\PDK_40\Other Metrowerks Tools\Command Line Tools
+if "%GNUC%" == "Y" set COMPILER_PATH=c:\usr\i586-netware\bin;c:\usr\bin
+if "%GNUC%" == "" set COMPILER_PATH=c:\prg\cwcmdl40
 
 rem   If using gnu make define path to utility
-set GNU_MAKE_PATH=%TOOLS%\gnu
+rem set GNU_MAKE_PATH=%NDKBASE%\gnu
+set GNU_MAKE_PATH=c:\prg\tools
 
 rem   If using ms nmake define path to nmake
-set MS_NMAKE_PATH=%TOOLS%\msvc\600\bin
+rem set MS_NMAKE_PATH=%NDKBASE%\msvc\600\bin
 
 rem   If using NASM assembler define path
-set NASM_PATH=%TOOLS%\nasm
+rem set NASM_PATH=%NDKBASE%\nasm
+set NASM_PATH=c:\prg\tools
 
 rem   Update path to include tool paths
-set path=%path%;%METROWERKS_PATH%
+set path=%path%;%COMPILER_PATH%
 if not "%GNU_MAKE_PATH%" == "" set path=%path%;%GNU_MAKE_PATH%
 if not "%MS_NMAKE_PATH%" == "" set path=%path%;%MS_NMAKE_PATH%
 if not "%NASM_PATH%"     == "" set path=%path%;%NASM_PATH%
 if not "%PERL_PATH%"     == "" set path=%path%;%PERL_PATH%
 
-rem   Set MWCIncludes to location of Novell NDK includes
-if "%LIBC_BUILD%" == "Y" set MWCIncludes=%TOOLS%\ndk\libc\include;%TOOLS%\ndk\libc\include\winsock;.\engines
-if "%CLIB_BUILD%" == "Y" set MWCIncludes=%TOOLS%\ndk\nwsdk\include\nlm;.\engines
-set include=
+rem   Set INCLUDES to location of Novell NDK includes
+if "%LIBC_BUILD%" == "Y" set INCLUDE=%NDKBASE%\ndk\libc\include;%NDKBASE%\ndk\libc\include\winsock
+if "%CLIB_BUILD%" == "Y" set INCLUDE=%NDKBASE%\ndk\nwsdk\include\nlm;%NDKBASE%\ws295sdk\include
 
 rem   Set Imports to location of Novell NDK import files
-if "%LIBC_BUILD%" == "Y" set IMPORTS=%TOOLS%\ndk\libc\imports
-if "%CLIB_BUILD%" == "Y" set IMPORTS=%TOOLS%\ndk\nwsdk\imports
+if "%LIBC_BUILD%" == "Y" set IMPORTS=%NDKBASE%\ndk\libc\imports
+if "%CLIB_BUILD%" == "Y" set IMPORTS=%NDKBASE%\ndk\nwsdk\imports
 
 rem   Set PRELUDE to the absolute path of the prelude object to link with in
 rem   the Metrowerks NetWare PDK - NOTE: for Clib builds "clibpre.o" is 
 rem   recommended, for LibC NKS builds libcpre.o must be used
+if "%GNUC%" == "Y" goto gnuc
 if "%LIBC_BUILD%" == "Y" set PRELUDE=%IMPORTS%\libcpre.o
-if "%CLIB_BUILD%" == "Y" set PRELUDE=%IMPORTS%\clibpre.o
+rem if "%CLIB_BUILD%" == "Y" set PRELUDE=%IMPORTS%\clibpre.o
+if "%CLIB_BUILD%" == "Y" set PRELUDE=%IMPORTS%\prelude.o
+echo using MetroWerks CodeWarrior 
+goto info
 
+:gnuc
+if "%LIBC_BUILD%" == "Y" set PRELUDE=%IMPORTS%\libcpre.gcc.o
+rem if "%CLIB_BUILD%" == "Y" set PRELUDE=%IMPORTS%\clibpre.gcc.o
+if "%CLIB_BUILD%" == "Y" set PRELUDE=%IMPORTS%\prelude.gcc.o
+echo using GNU GCC Compiler 
+
+:info
+echo.
 
 if "%LIBC_BUILD%" == "Y" echo Enviroment configured for LibC build
 if "%LIBC_BUILD%" == "Y" echo use "netware\build.bat netware-libc ..." 
 
 if "%CLIB_BUILD%" == "Y" echo Enviroment configured for CLib build
 if "%CLIB_BUILD%" == "Y" echo use "netware\build.bat netware-clib ..." 
+
 goto end
 
 :usage
 rem ===============================================================
-echo .
-echo . No target build specified!
-echo .
-echo . usage: set_env [target]
-echo .
-echo .   target      - "netware-clib" - Clib build
-echo .               - "netware-libc" - LibC build
-echo .
-
-
+echo.
+echo No target build specified!
+echo.
+echo usage: set_env [target] [compiler]
+echo.
+echo target      - "netware-clib" - Clib build
+echo             - "netware-libc" - LibC build
+echo.
+echo compiler    - "gnuc"         - GNU GCC Compiler
+echo             - "codewarrior"  - MetroWerks CodeWarrior (default)
+echo.
 
 :end
+echo.
+
 

README

@@ -1,7 +1,7 @@
 
- OpenSSL 0.9.8f
+ OpenSSL 1.0.0-beta4 10 Nov 2009
 
- Copyright (c) 1998-2007 The OpenSSL Project
+ Copyright (c) 1998-2009 The OpenSSL Project
  Copyright (c) 1995-1998 Eric A. Young, Tim J. Hudson
  All rights reserved.
 
@@ -112,8 +112,6 @@
  should be contacted if that algorithm is to be used; their web page is
  http://www.ascom.ch/.
 
- The MDC2 algorithm is patented by IBM.
-
  NTT and Mitsubishi have patents and pending patents on the Camellia
  algorithm, but allow use at no charge without requiring an explicit
  licensing agreement: http://info.isl.ntt.co.jp/crypt/eng/info/chiteki.html
@@ -139,6 +137,9 @@
  SUPPORT
  -------
 
+ See the OpenSSL website www.openssl.org for details of how to obtain
+ commercial technical support.
+
  If you have any problems with OpenSSL then please take the following steps
  first:
 
@@ -161,10 +162,14 @@
     - Stack Traceback (if the application dumps core)
 
  Report the bug to the OpenSSL project via the Request Tracker
- (http://www.openssl.org/support/rt2.html) by mail to:
+ (http://www.openssl.org/support/rt.html) by mail to:
 
     openssl-bugs@openssl.org
 
+ Note that the request tracker should NOT be used for general assistance
+ or support queries. Just because something doesn't work the way you expect
+ does not mean it is necessarily a bug in OpenSSL.
+
  Note that mail to openssl-bugs@openssl.org is recorded in the publicly
  readable request tracker database and is forwarded to a public
  mailing list. Confidential mail may be sent to openssl-security@openssl.org
@@ -175,10 +180,22 @@
 
  Development is coordinated on the openssl-dev mailing list (see
  http://www.openssl.org for information on subscribing). If you
- would like to submit a patch, send it to openssl-dev@openssl.org with
+ would like to submit a patch, send it to openssl-bugs@openssl.org with
  the string "[PATCH]" in the subject. Please be sure to include a
  textual explanation of what your patch does.
 
+ If you are unsure as to whether a feature will be useful for the general
+ OpenSSL community please discuss it on the openssl-dev mailing list first.
+ Someone may be already working on the same thing or there may be a good
+ reason as to why that feature isn't implemented.
+
+ Patches should be as up to date as possible, preferably relative to the
+ current CVS or the last snapshot. They should follow the coding style of
+ OpenSSL and compile without warnings. Some of the core team developer targets
+ can be used for testing purposes, (debug-steve64, debug-geoff etc). OpenSSL
+ compiles on many varied platforms: try to ensure you only use portable
+ features.
+
  Note: For legal reasons, contributions from the US can be accepted only
  if a TSU notification and a copy of the patch are sent to crypt@bis.doc.gov
  (formerly BXA) with a copy to the ENC Encryption Request Coordinator;

STATUS

@@ -1,11 +1,16 @@
 
   OpenSSL STATUS                           Last modified at
-  ______________                           $Date: 2007/10/11 14:58:14 $
+  ______________                           $Date: 2009/11/10 13:15:08 $
 
   DEVELOPMENT STATE
 
-    o  OpenSSL 0.9.9:  Under development...
-    o  OpenSSL 0.9.8f: Released on October   11th, 2007 
+    o  OpenSSL 1.0.0-beta4: Released on Novemner 10th, 2009
+    o  OpenSSL 1.0.0-beta3: Released on July 15th, 2009
+    o  OpenSSL 1.0.0-beta2: Released on April 21st, 2009
+    o  OpenSSL 1.0.0-beta1: Released on April 1st, 2009
+    o  OpenSSL 0.9.8h: Released on May       28th, 2008
+    o  OpenSSL 0.9.8g: Released on October   19th, 2007
+    o  OpenSSL 0.9.8f: Released on October   11th, 2007
     o  OpenSSL 0.9.8e: Released on February  23rd, 2007
     o  OpenSSL 0.9.8d: Released on September 28th, 2006
     o  OpenSSL 0.9.8c: Released on September  5th, 2006
@@ -48,7 +53,7 @@
     o  OpenSSL 0.9.2b: Released on March     22th, 1999
     o  OpenSSL 0.9.1c: Released on December  23th, 1998
 
-  [See also http://www.openssl.org/support/rt2.html]
+  [See also http://www.openssl.org/support/rt.html]
 
   RELEASE SHOWSTOPPERS
 

VMS/install.com

@@ -12,6 +12,14 @@ $	    WRITE SYS$OUTPUT "Should be the directory where you want things installed.
 $	    EXIT
 $	ENDIF
 $
+$	IF (F$GETSYI("CPU").LT.128)
+$	THEN
+$	    ARCH := VAX
+$	ELSE
+$	    ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE")
+$	    IF (ARCH .EQS. "") THEN ARCH = "UNK"
+$	ENDIF
+$
 $	ROOT = F$PARSE(P1,"[]A.;0",,,"SYNTAX_ONLY,NO_CONCEAL") - "A.;0"
 $	ROOT_DEV = F$PARSE(ROOT,,,"DEVICE","SYNTAX_ONLY")
 $	ROOT_DIR = F$PARSE(ROOT,,,"DIRECTORY","SYNTAX_ONLY") -
@@ -19,13 +27,7 @@ $	ROOT_DIR = F$PARSE(ROOT,,,"DIRECTORY","SYNTAX_ONLY") -
 $	ROOT = ROOT_DEV + "[" + ROOT_DIR
 $
 $	DEFINE/NOLOG WRK_SSLROOT 'ROOT'.] /TRANS=CONC
-$	DEFINE/NOLOG WRK_SSLVLIB WRK_SSLROOT:[VAX_LIB]
-$	DEFINE/NOLOG WRK_SSLALIB WRK_SSLROOT:[ALPHA_LIB]
 $	DEFINE/NOLOG WRK_SSLINCLUDE WRK_SSLROOT:[INCLUDE]
-$	DEFINE/NOLOG WRK_SSLVEXE WRK_SSLROOT:[VAX_EXE]
-$	DEFINE/NOLOG WRK_SSLAEXE WRK_SSLROOT:[ALPHA_EXE]
-$	DEFINE/NOLOG WRK_SSLCERTS WRK_SSLROOT:[CERTS]
-$	DEFINE/NOLOG WRK_SSLPRIVATE WRK_SSLROOT:[PRIVATE]
 $
 $	IF F$PARSE("WRK_SSLROOT:[000000]") .EQS. "" THEN -
 	   CREATE/DIR/LOG WRK_SSLROOT:[000000]
@@ -39,7 +41,7 @@ $	IF F$SEARCH("WRK_SSLINCLUDE:vms_idhacks.h") .NES. "" THEN -
 $
 $	OPEN/WRITE SF WRK_SSLROOT:[VMS]OPENSSL_STARTUP.COM
 $	WRITE SYS$OUTPUT "%OPEN-I-CREATED,  ",F$SEARCH("WRK_SSLROOT:[VMS]OPENSSL_STARTUP.COM")," created."
-$	WRITE SF "$! Startup file for Openssl 0.9.2-RL 15-Mar-1999"
+$	WRITE SF "$! Startup file for Openssl"
 $	WRITE SF "$!"
 $	WRITE SF "$! Do not edit this file, as it will be regenerated during next installation."
 $	WRITE SF "$! Instead, add or change SSLROOT:[VMS]OPENSSL_SYSTARTUP.COM"
@@ -47,8 +49,13 @@ $	WRITE SF "$!"
 $	WRITE SF "$! P1	a qualifier to DEFINE.  For example ""/SYSTEM"" to get the logical names"
 $	WRITE SF "$!	defined in the system logical name table."
 $	WRITE SF "$!"
-$	WRITE SF "$	ARCH = ""VAX"""
-$	WRITE SF "$	IF F$GETSYI(""CPU"") .GE. 128 THEN ARCH = ""ALPHA"""
+$	WRITE SF "$	IF (F$GETSYI(""CPU"").LT.128)"
+$	WRITE SF "$	THEN"
+$	WRITE SF "$	    ARCH := VAX"
+$	WRITE SF "$	ELSE"
+$	WRITE SF "$	    ARCH = F$EDIT( F$GETSYI( ""ARCH_NAME""), ""UPCASE"")"
+$	WRITE SF "$	    IF (ARCH .EQS. """") THEN ARCH = ""UNK"""
+$	WRITE SF "$	ENDIF"
 $	WRITE SF "$	DEFINE/NOLOG'P1	SSLROOT		",ROOT,".] /TRANS=CONC"
 $	WRITE SF "$	DEFINE/NOLOG'P1	SSLLIB		SSLROOT:['ARCH'_LIB]"
 $	WRITE SF "$	DEFINE/NOLOG'P1	SSLINCLUDE	SSLROOT:[INCLUDE]"

VMS/mkshared.com

@@ -3,10 +3,10 @@ $!
 $! No command line parameters.  This should be run at the start of the source
 $! tree (the same directory where one finds INSTALL.VMS).
 $!
-$! Input:	[.UTIL]LIBEAY.NUM,[.AXP.EXE.CRYPTO]LIBCRYPTO.OLB
-$!		[.UTIL]SSLEAY.NUM,[.AXP.EXE.SSL]LIBSSL.OLB
-$! Output:	[.AXP.EXE.CRYPTO]LIBCRYPTO.OPT,.MAP,.EXE
-$!		[.AXP.EXE.SSL]LIBSSL.OPT,.MAP,.EXE
+$! Input:	[.UTIL]LIBEAY.NUM,[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB
+$!		[.UTIL]SSLEAY.NUM,[.xxx.EXE.SSL]LIBSSL.OLB
+$! Output:	[.xxx.EXE.CRYPTO]LIBCRYPTO.OPT,.MAP,.EXE
+$!		[.xxx.EXE.SSL]LIBSSL.OPT,.MAP,.EXE
 $!
 $! So far, tests have only been made on VMS for Alpha.  VAX will come in time.
 $! ===========================================================================
@@ -19,31 +19,41 @@ $   write sys$error "ERROR: Couldn't find any library version info..."
 $   exit
 $ endif
 $
-$ if f$getsyi("CPU") .ge. 128
+$ if (f$getsyi("cpu").lt.128)
 $ then
+$     arch := VAX
+$ else
+$     arch = f$edit( f$getsyi( "ARCH_NAME"), "UPCASE")
+$     if (arch .eqs. "") then arch = "UNK"
+$ endif
+$
+$ if arch .nes. "VAX"
+$ then
+$   arch_vax = 0
 $   libid  = "Crypto"
 $   libnum = "[.UTIL]LIBEAY.NUM"
-$   libdir = "[.AXP.EXE.CRYPTO]"
+$   libdir = "[.''ARCH'.EXE.CRYPTO]"
 $   libolb = "''libdir'LIBCRYPTO.OLB"
 $   libopt = "''libdir'LIBCRYPTO.OPT"
 $   libmap = "''libdir'LIBCRYPTO.MAP"
 $   libgoal= "''libdir'LIBCRYPTO.EXE"
 $   libref = ""
-$   gosub create_axp_shr
+$   gosub create_nonvax_shr
 $   libid  = "SSL"
 $   libnum = "[.UTIL]SSLEAY.NUM"
-$   libdir = "[.AXP.EXE.SSL]"
+$   libdir = "[.''ARCH'.EXE.SSL]"
 $   libolb = "''libdir'LIBSSL.OLB"
 $   libopt = "''libdir'LIBSSL.OPT"
 $   libmap = "''libdir'LIBSSL.MAP"
 $   libgoal= "''libdir'LIBSSL.EXE"
-$   libref = "[.AXP.EXE.CRYPTO]LIBCRYPTO.EXE"
-$   gosub create_axp_shr
+$   libref = "[.''ARCH'.EXE.CRYPTO]LIBCRYPTO.EXE"
+$   gosub create_nonvax_shr
 $ else
+$   arch_vax = 1
 $   libtit = "CRYPTO_TRANSFER_VECTOR"
 $   libid  = "Crypto"
 $   libnum = "[.UTIL]LIBEAY.NUM"
-$   libdir = "[.VAX.EXE.CRYPTO]"
+$   libdir = "[.''ARCH'.EXE.CRYPTO]"
 $   libmar = "''libdir'LIBCRYPTO.MAR"
 $   libolb = "''libdir'LIBCRYPTO.OLB"
 $   libopt = "''libdir'LIBCRYPTO.OPT"
@@ -56,22 +66,22 @@ $   gosub create_vax_shr
 $   libtit = "SSL_TRANSFER_VECTOR"
 $   libid  = "SSL"
 $   libnum = "[.UTIL]SSLEAY.NUM"
-$   libdir = "[.VAX.EXE.SSL]"
+$   libdir = "[.''ARCH'.EXE.SSL]"
 $   libmar = "''libdir'LIBSSL.MAR"
 $   libolb = "''libdir'LIBSSL.OLB"
 $   libopt = "''libdir'LIBSSL.OPT"
 $   libobj = "''libdir'LIBSSL.OBJ"
 $   libmap = "''libdir'LIBSSL.MAP"
 $   libgoal= "''libdir'LIBSSL.EXE"
-$   libref = "[.VAX.EXE.CRYPTO]LIBCRYPTO.EXE"
+$   libref = "[.''ARCH'.EXE.CRYPTO]LIBCRYPTO.EXE"
 $   libvec = "LIBSSL"
 $   gosub create_vax_shr
 $ endif
 $ exit
 $
-$! ----- Soubroutines to actually build the shareable libraries
-$! The way things work, there's a main shareable library creator for each
-$! supported architecture, which is called from the main code above.
+$! ----- Soubroutines to build the shareable libraries
+$! For each supported architecture, there's a main shareable library
+$! creator, which is called from the main code above.
 $! The creator will define a number of variables to tell the next levels of
 $! subroutines what routines to use to write to the option files, call the
 $! main processor, read_func_num, and when that is done, it will write version
@@ -97,10 +107,10 @@ $! read_func_num depends on the following variables from the creator:
 $! libwriter	The name of the writer routine to call for each .num file line
 $! -----
 $
-$! ----- Subroutines for AXP
+$! ----- Subroutines for non-VAX
 $! -----
 $! The creator routine
-$ create_axp_shr:
+$ create_nonvax_shr:
 $   open/write opt 'libopt'
 $   write opt "identification=""",libid," ",libverstr,""""
 $   write opt libolb,"/lib"
@@ -108,7 +118,7 @@ $   if libref .nes. "" then write opt libref,"/SHARE"
 $   write opt "SYMBOL_VECTOR=(-"
 $   libfirstentry := true
 $   libwrch   := opt
-$   libwriter := write_axp_transfer_entry
+$   libwriter := write_nonvax_transfer_entry
 $   textcount = 0
 $   gosub read_func_num
 $   write opt ")"
@@ -118,7 +128,7 @@ $   link/map='libmap'/full/share='libgoal' 'libopt'/option
 $   return
 $
 $! The record writer routine
-$ write_axp_transfer_entry:
+$ write_nonvax_transfer_entry:
 $   if libentry .eqs. ".dummy" then return
 $   if info_kind .eqs. "VARIABLE"
 $   then
@@ -144,7 +154,7 @@ $   libfirstentry := false
 $   textcount = textcount + textcount_this
 $   return
 $
-$! ----- Subroutines for AXP
+$! ----- Subroutines for VAX
 $! -----
 $! The creator routine
 $ create_vax_shr:
@@ -264,8 +274,15 @@ $             truesum = truesum + 1
 $           if plat_entry .eqs. "!EXPORT_VAR_AS_FUNCTION" then -
 $             falsesum = falsesum + 1
 $         endif
-$         if plat_entry .eqs. "VMS" then truesum = truesum + 1
-$         if plat_entry .eqs. "!VMS" then falsesum = falsesum + 1
+$!
+$         if ((plat_entry .eqs. "VMS") .or. -
+            (arch_vax .and. (plat_entry .eqs. "VMSVAX"))) then -
+            truesum = truesum + 1
+$!
+$         if ((plat_entry .eqs. "!VMS") .or. -
+            (arch_vax .and. (plat_entry .eqs. "!VMSVAX"))) then -
+            falsesum = falsesum + 1
+$!
 $	  goto loop1
 $       endif
 $     endloop1:

VMS/openssl_utils.com

@@ -8,31 +8,39 @@ $!
 $!
 $! Slightly modified by Richard Levitte <richard@levitte.org>
 $!
+$!
+$! Always define OPENSSL.  Others are optional (non-null P1).
+$!
 $ OPENSSL  :== $SSLEXE:OPENSSL
-$ VERIFY   :== $SSLEXE:OPENSSL VERIFY
-$ ASN1PARSE:== $SSLEXE:OPENSSL ASN1PARS
-$ REQ      :== $SSLEXE:OPENSSL REQ
-$ DGST     :== $SSLEXE:OPENSSL DGST
-$ DH       :== $SSLEXE:OPENSSL DH
-$ ENC      :== $SSLEXE:OPENSSL ENC
-$ GENDH    :== $SSLEXE:OPENSSL GENDH
-$ ERRSTR   :== $SSLEXE:OPENSSL ERRSTR
-$ CA       :== $SSLEXE:OPENSSL CA
-$ CRL      :== $SSLEXE:OPENSSL CRL
-$ RSA      :== $SSLEXE:OPENSSL RSA
-$ DSA      :== $SSLEXE:OPENSSL DSA
-$ DSAPARAM :== $SSLEXE:OPENSSL DSAPARAM
-$ X509     :== $SSLEXE:OPENSSL X509
-$ GENRSA   :== $SSLEXE:OPENSSL GENRSA
-$ GENDSA   :== $SSLEXE:OPENSSL GENDSA
-$ S_SERVER :== $SSLEXE:OPENSSL S_SERVER
-$ S_CLIENT :== $SSLEXE:OPENSSL S_CLIENT
-$ SPEED    :== $SSLEXE:OPENSSL SPEED
-$ S_TIME   :== $SSLEXE:OPENSSL S_TIME
-$ VERSION  :== $SSLEXE:OPENSSL VERSION
-$ PKCS7    :== $SSLEXE:OPENSSL PKCS7
-$ CRL2PKCS7:== $SSLEXE:OPENSSL CRL2P7
-$ SESS_ID  :== $SSLEXE:OPENSSL SESS_ID
-$ CIPHERS  :== $SSLEXE:OPENSSL CIPHERS
-$ NSEQ     :== $SSLEXE:OPENSSL NSEQ
-$ PKCS12   :== $SSLEXE:OPENSSL PKCS12
+$
+$ IF (P1 .NES. "")
+$ THEN
+$     VERIFY   :== $SSLEXE:OPENSSL VERIFY
+$     ASN1PARSE:== $SSLEXE:OPENSSL ASN1PARS
+$! REQ could conflict with REQUEST.
+$     OREQ     :== $SSLEXE:OPENSSL REQ
+$     DGST     :== $SSLEXE:OPENSSL DGST
+$     DH       :== $SSLEXE:OPENSSL DH
+$     ENC      :== $SSLEXE:OPENSSL ENC
+$     GENDH    :== $SSLEXE:OPENSSL GENDH
+$     ERRSTR   :== $SSLEXE:OPENSSL ERRSTR
+$     CA       :== $SSLEXE:OPENSSL CA
+$     CRL      :== $SSLEXE:OPENSSL CRL
+$     RSA      :== $SSLEXE:OPENSSL RSA
+$     DSA      :== $SSLEXE:OPENSSL DSA
+$     DSAPARAM :== $SSLEXE:OPENSSL DSAPARAM
+$     X509     :== $SSLEXE:OPENSSL X509
+$     GENRSA   :== $SSLEXE:OPENSSL GENRSA
+$     GENDSA   :== $SSLEXE:OPENSSL GENDSA
+$     S_SERVER :== $SSLEXE:OPENSSL S_SERVER
+$     S_CLIENT :== $SSLEXE:OPENSSL S_CLIENT
+$     SPEED    :== $SSLEXE:OPENSSL SPEED
+$     S_TIME   :== $SSLEXE:OPENSSL S_TIME
+$     VERSION  :== $SSLEXE:OPENSSL VERSION
+$     PKCS7    :== $SSLEXE:OPENSSL PKCS7
+$     CRL2PKCS7:== $SSLEXE:OPENSSL CRL2P7
+$     SESS_ID  :== $SSLEXE:OPENSSL SESS_ID
+$     CIPHERS  :== $SSLEXE:OPENSSL CIPHERS
+$     NSEQ     :== $SSLEXE:OPENSSL NSEQ
+$     PKCS12   :== $SSLEXE:OPENSSL PKCS12
+$ ENDIF

apps/.cvsignore

@@ -5,3 +5,4 @@ der_chop.bak
 CA.pl
 *.flc
 semantic.cache
+*.dll

apps/CA.sh

@@ -5,10 +5,10 @@
 #      things easier between now and when Eric is convinced to fix it :-)
 #
 # CA -newca ... will setup the right stuff
-# CA -newreq ... will generate a certificate request 
-# CA -sign ... will sign the generated request and output 
+# CA -newreq ... will generate a certificate request
+# CA -sign ... will sign the generated request and output
 #
-# At the end of that grab newreq.pem and newcert.pem (one has the key 
+# At the end of that grab newreq.pem and newcert.pem (one has the key
 # and the other the certificate) and cat them together and that is what
 # you want/need ... I'll make even this a little cleaner later.
 #
@@ -16,8 +16,8 @@
 # 12-Jan-96 tjh    Added more things ... including CA -signcert which
 #                  converts a certificate to a request and then signs it.
 # 10-Jan-96 eay    Fixed a few more bugs and added the SSLEAY_CONFIG
-#		   environment variable so this can be driven from
-#		   a script.
+#                  environment variable so this can be driven from
+#                  a script.
 # 25-Jul-96 eay    Cleaned up filenames some more.
 # 11-Jun-96 eay    Fixed a few filename missmatches.
 # 03-May-96 eay    Modified to use 'ssleay cmd' instead of 'cmd'.
@@ -29,52 +29,87 @@
 
 # default openssl.cnf file has setup as per the following
 # demoCA ... where everything is stored
+cp_pem() {
+    infile=$1
+    outfile=$2
+    bound=$3
+    flag=0
+    exec <$infile;
+    while read line; do
+	if [ $flag -eq 1 ]; then
+		echo $line|grep "^-----END.*$bound"  2>/dev/null 1>/dev/null
+		if [ $? -eq 0 ] ; then
+			echo $line >>$outfile
+			break
+		else
+			echo $line >>$outfile
+		fi
+	fi
+
+	echo $line|grep "^-----BEGIN.*$bound"  2>/dev/null 1>/dev/null
+	if [ $? -eq 0 ]; then
+		echo $line >$outfile
+		flag=1
+	fi
+    done
+}
+
+usage() {
+ echo "usage: $0 -newcert|-newreq|-newreq-nodes|-newca|-sign|-verify" >&2
+}
 
 if [ -z "$OPENSSL" ]; then OPENSSL=openssl; fi
 
-DAYS="-days 365"	# 1 year
+if [ -z "$DAYS" ] ; then DAYS="-days 365" ; fi	# 1 year
 CADAYS="-days 1095"	# 3 years
 REQ="$OPENSSL req $SSLEAY_CONFIG"
 CA="$OPENSSL ca $SSLEAY_CONFIG"
 VERIFY="$OPENSSL verify"
 X509="$OPENSSL x509"
+PKCS12="openssl pkcs12"
 
-CATOP=./demoCA
+if [ -z "$CATOP" ] ; then CATOP=./demoCA ; fi
 CAKEY=./cakey.pem
 CAREQ=./careq.pem
 CACERT=./cacert.pem
 
-for i
-do
-case $i in
+RET=0
+
+while [ "$1" != "" ] ; do
+case $1 in
 -\?|-h|-help)
-    echo "usage: CA -newcert|-newreq|-newca|-sign|-verify" >&2
+    usage
     exit 0
     ;;
--newcert) 
+-newcert)
     # create a certificate
     $REQ -new -x509 -keyout newkey.pem -out newcert.pem $DAYS
     RET=$?
     echo "Certificate is in newcert.pem, private key is in newkey.pem"
     ;;
--newreq) 
+-newreq)
     # create a certificate request
     $REQ -new -keyout newkey.pem -out newreq.pem $DAYS
     RET=$?
     echo "Request is in newreq.pem, private key is in newkey.pem"
     ;;
--newca)     
+-newreq-nodes) 
+    # create a certificate request
+    $REQ -new -nodes -keyout newreq.pem -out newreq.pem $DAYS
+    RET=$?
+    echo "Request (and private key) is in newreq.pem"
+    ;;
+-newca)
     # if explicitly asked for or it doesn't exist then setup the directory
-    # structure that Eric likes to manage things 
+    # structure that Eric likes to manage things
     NEW="1"
     if [ "$NEW" -o ! -f ${CATOP}/serial ]; then
 	# create the directory hierarchy
-	mkdir ${CATOP} 
-	mkdir ${CATOP}/certs 
-	mkdir ${CATOP}/crl 
-	mkdir ${CATOP}/newcerts
-	mkdir ${CATOP}/private
-	echo "00" > ${CATOP}/serial
+	mkdir -p ${CATOP}
+	mkdir -p ${CATOP}/certs
+	mkdir -p ${CATOP}/crl
+	mkdir -p ${CATOP}/newcerts
+	mkdir -p ${CATOP}/private
 	touch ${CATOP}/index.txt
     fi
     if [ ! -f ${CATOP}/private/$CAKEY ]; then
@@ -83,37 +118,60 @@ case $i in
 
 	# ask user for existing CA certificate
 	if [ "$FILE" ]; then
-	    cp $FILE ${CATOP}/private/$CAKEY
+	    cp_pem $FILE ${CATOP}/private/$CAKEY PRIVATE
+	    cp_pem $FILE ${CATOP}/$CACERT CERTIFICATE
 	    RET=$?
+	    if [ ! -f "${CATOP}/serial" ]; then
+		$X509 -in ${CATOP}/$CACERT -noout -next_serial \
+		      -out ${CATOP}/serial
+	    fi
 	else
 	    echo "Making CA certificate ..."
 	    $REQ -new -keyout ${CATOP}/private/$CAKEY \
 			   -out ${CATOP}/$CAREQ
-	    $CA -out ${CATOP}/$CACERT $CADAYS -batch \
+	    $CA -create_serial -out ${CATOP}/$CACERT $CADAYS -batch \
 			   -keyfile ${CATOP}/private/$CAKEY -selfsign \
-			   -infiles ${CATOP}/$CAREQ 
+			   -extensions v3_ca \
+			   -infiles ${CATOP}/$CAREQ
 	    RET=$?
 	fi
     fi
     ;;
 -xsign)
-    $CA -policy policy_anything -infiles newreq.pem 
+    $CA -policy policy_anything -infiles newreq.pem
     RET=$?
     ;;
--sign|-signreq) 
+-pkcs12)
+    if [ -z "$2" ] ; then
+	CNAME="My Certificate"
+    else
+	CNAME="$2"
+    fi
+    $PKCS12 -in newcert.pem -inkey newreq.pem -certfile ${CATOP}/$CACERT \
+	    -out newcert.p12 -export -name "$CNAME"
+    RET=$?
+    exit $RET
+    ;;
+-sign|-signreq)
     $CA -policy policy_anything -out newcert.pem -infiles newreq.pem
     RET=$?
     cat newcert.pem
     echo "Signed certificate is in newcert.pem"
     ;;
--signcert) 
+-signCA)
+    $CA -policy policy_anything -out newcert.pem -extensions v3_ca -infiles newreq.pem
+    RET=$?
+    echo "Signed CA certificate is in newcert.pem"
+    ;;
+-signcert)
     echo "Cert passphrase will be requested twice - bug?"
     $X509 -x509toreq -in newreq.pem -signkey newreq.pem -out tmp.pem
     $CA -policy policy_anything -out newcert.pem -infiles tmp.pem
+    RET=$?
     cat newcert.pem
     echo "Signed certificate is in newcert.pem"
     ;;
--verify) 
+-verify)
     shift
     if [ -z "$1" ]; then
 	    $VERIFY -CAfile $CATOP/$CACERT newcert.pem
@@ -127,13 +185,14 @@ case $i in
 	    fi
 	done
     fi
-    exit 0
+    exit $RET
     ;;
 *)
-    echo "Unknown arg $i";
+    echo "Unknown arg $i" >&2
+    usage
     exit 1
     ;;
 esac
+shift
 done
 exit $RET
-

apps/apps.h

@@ -122,6 +122,9 @@
 #ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
 #endif
+#ifndef OPENSSL_NO_OCSP
+#include <openssl/ocsp.h>
+#endif
 #include <openssl/ossl_typ.h>
 
 int app_RAND_load_file(const char *file, BIO *bio_e, int dont_warn);
@@ -134,11 +137,6 @@ long app_RAND_load_files(char *file); /* `file' is a list of files to read,
                                        * (see e_os.h).  The string is
                                        * destroyed! */
 
-#ifdef OPENSSL_SYS_WIN32
-#define rename(from,to) WIN32_rename((from),(to))
-int WIN32_rename(const char *oldname,const char *newname);
-#endif
-
 #ifndef MONOLITH
 
 #define MAIN(a,v)	main(a,v)
@@ -170,64 +168,47 @@ extern BIO *bio_err;
 #define do_pipe_sig()
 #endif
 
+#ifdef OPENSSL_NO_COMP
+#define zlib_cleanup() 
+#else
+#define zlib_cleanup() COMP_zlib_cleanup()
+#endif
+
 #if defined(MONOLITH) && !defined(OPENSSL_C)
 #  define apps_startup() \
 		do_pipe_sig()
 #  define apps_shutdown()
 #else
 #  ifndef OPENSSL_NO_ENGINE
-#    if defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_WIN16) || \
-     defined(OPENSSL_SYS_WIN32)
-#      ifdef _O_BINARY
-#        define apps_startup() \
-			do { _fmode=_O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
+#    define apps_startup() \
+			do { do_pipe_sig(); CRYPTO_malloc_init(); \
 			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
 			ENGINE_load_builtin_engines(); setup_ui_method(); } while(0)
-#      else
-#        define apps_startup() \
-			do { _fmode=O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
-			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
-			ENGINE_load_builtin_engines(); setup_ui_method(); } while(0)
-#      endif
-#    else
-#      define apps_startup() \
-			do { do_pipe_sig(); OpenSSL_add_all_algorithms(); \
-			ERR_load_crypto_strings(); ENGINE_load_builtin_engines(); \
-			setup_ui_method(); } while(0)
-#    endif
 #    define apps_shutdown() \
 			do { CONF_modules_unload(1); destroy_ui_method(); \
-			EVP_cleanup(); ENGINE_cleanup(); \
-			CRYPTO_cleanup_all_ex_data(); ERR_remove_state(0); \
-			ERR_free_strings(); } while(0)
+			OBJ_cleanup(); EVP_cleanup(); ENGINE_cleanup(); \
+			CRYPTO_cleanup_all_ex_data(); ERR_remove_thread_state(NULL); \
+			ERR_free_strings(); zlib_cleanup();} while(0)
 #  else
-#    if defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_WIN16) || \
-     defined(OPENSSL_SYS_WIN32)
-#      ifdef _O_BINARY
-#        define apps_startup() \
-			do { _fmode=_O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
+#    define apps_startup() \
+			do { do_pipe_sig(); CRYPTO_malloc_init(); \
 			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
 			setup_ui_method(); } while(0)
-#      else
-#        define apps_startup() \
-			do { _fmode=O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
-			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
-			setup_ui_method(); } while(0)
-#      endif
-#    else
-#      define apps_startup() \
-			do { do_pipe_sig(); OpenSSL_add_all_algorithms(); \
-			ERR_load_crypto_strings(); \
-			setup_ui_method(); } while(0)
-#    endif
 #    define apps_shutdown() \
 			do { CONF_modules_unload(1); destroy_ui_method(); \
-			EVP_cleanup(); \
-			CRYPTO_cleanup_all_ex_data(); ERR_remove_state(0); \
-			ERR_free_strings(); } while(0)
+			OBJ_cleanup(); EVP_cleanup(); \
+			CRYPTO_cleanup_all_ex_data(); ERR_remove_thread_state(NULL); \
+			ERR_free_strings(); zlib_cleanup(); } while(0)
 #  endif
 #endif
 
+#ifdef OPENSSL_SYSNAME_WIN32
+#  define openssl_fdset(a,b) FD_SET((unsigned int)a, b)
+#else
+#  define openssl_fdset(a,b) FD_SET(a, b)
+#endif
+
+
 typedef struct args_st
 	{
 	char **data;
@@ -270,11 +251,20 @@ EVP_PKEY *load_pubkey(BIO *err, const char *file, int format, int maybe_stdin,
 	const char *pass, ENGINE *e, const char *key_descrip);
 STACK_OF(X509) *load_certs(BIO *err, const char *file, int format,
 	const char *pass, ENGINE *e, const char *cert_descrip);
+STACK_OF(X509_CRL) *load_crls(BIO *err, const char *file, int format,
+	const char *pass, ENGINE *e, const char *cert_descrip);
 X509_STORE *setup_verify(BIO *bp, char *CAfile, char *CApath);
 #ifndef OPENSSL_NO_ENGINE
 ENGINE *setup_engine(BIO *err, const char *engine, int debug);
 #endif
 
+#ifndef OPENSSL_NO_OCSP
+OCSP_RESPONSE *process_responder(BIO *err, OCSP_REQUEST *req,
+			char *host, char *path, char *port, int use_ssl,
+			STACK_OF(CONF_VALUE) *headers,
+			int req_timeout);
+#endif
+
 int load_config(BIO *err, CONF *cnf);
 char *make_config_name(void);
 
@@ -313,13 +303,27 @@ int index_index(CA_DB *db);
 int save_index(const char *dbfile, const char *suffix, CA_DB *db);
 int rotate_index(const char *dbfile, const char *new_suffix, const char *old_suffix);
 void free_index(CA_DB *db);
-int index_name_cmp(const char **a, const char **b);
+#define index_name_cmp_noconst(a, b) \
+	index_name_cmp((const OPENSSL_CSTRING *)CHECKED_PTR_OF(OPENSSL_STRING, a), \
+	(const OPENSSL_CSTRING *)CHECKED_PTR_OF(OPENSSL_STRING, b))
+int index_name_cmp(const OPENSSL_CSTRING *a, const OPENSSL_CSTRING *b);
 int parse_yesno(const char *str, int def);
 
 X509_NAME *parse_name(char *str, long chtype, int multirdn);
 int args_verify(char ***pargs, int *pargc,
 			int *badarg, BIO *err, X509_VERIFY_PARAM **pm);
 void policies_print(BIO *out, X509_STORE_CTX *ctx);
+int bio_to_mem(unsigned char **out, int maxlen, BIO *in);
+int pkey_ctrl_string(EVP_PKEY_CTX *ctx, char *value);
+int init_gen_str(BIO *err, EVP_PKEY_CTX **pctx,
+			const char *algname, ENGINE *e, int do_param);
+#ifndef OPENSSL_NO_PSK
+extern char *psk_key;
+#endif
+#ifndef OPENSSL_NO_JPAKE
+void jpake_client_auth(BIO *out, BIO *conn, const char *secret);
+void jpake_server_auth(BIO *out, BIO *conn, const char *secret);
+#endif
 
 #define FORMAT_UNDEF    0
 #define FORMAT_ASN1     1
@@ -331,6 +335,10 @@ void policies_print(BIO *out, X509_STORE_CTX *ctx);
 #define FORMAT_ENGINE   7
 #define FORMAT_IISSGC	8	/* XXX this stupid macro helps us to avoid
 				 * adding yet another param to load_*key() */
+#define FORMAT_PEMRSA	9	/* PEM RSAPubicKey format */
+#define FORMAT_ASN1RSA	10	/* DER RSAPubicKey format */
+#define FORMAT_MSBLOB	11	/* MS Key blob format */
+#define FORMAT_PVK	12	/* MS PVK file format */
 
 #define EXT_COPY_NONE	0
 #define EXT_COPY_ADD	1
@@ -342,4 +350,11 @@ void policies_print(BIO *out, X509_STORE_CTX *ctx);
 
 #define SERIAL_RAND_BITS	64
 
+int app_isdir(const char *);
+int raw_read_stdin(void *,int);
+int raw_write_stdout(const void *,int);
+
+#define TM_START	0
+#define TM_STOP		1
+double app_tminterval (int stop,int usertime);
 #endif

apps/asn1pars.c

@@ -56,7 +56,7 @@
  * [including the GNU Public Licence.]
  */
 
-/* A nice addition from Dr Stephen Henson <shenson@bigfoot.com> to 
+/* A nice addition from Dr Stephen Henson <steve@openssl.org> to 
  * add the -strparse option which parses nested binary structures
  */
 
@@ -96,7 +96,7 @@ int MAIN(int argc, char **argv)
 	unsigned char *tmpbuf;
 	const unsigned char *ctmpbuf;
 	BUF_MEM *buf=NULL;
-	STACK *osk=NULL;
+	STACK_OF(OPENSSL_STRING) *osk=NULL;
 	ASN1_TYPE *at=NULL;
 
 	informat=FORMAT_PEM;
@@ -113,7 +113,7 @@ int MAIN(int argc, char **argv)
 	prog=argv[0];
 	argc--;
 	argv++;
-	if ((osk=sk_new_null()) == NULL)
+	if ((osk=sk_OPENSSL_STRING_new_null()) == NULL)
 		{
 		BIO_printf(bio_err,"Memory allocation failure\n");
 		goto end;
@@ -169,7 +169,7 @@ int MAIN(int argc, char **argv)
 		else if (strcmp(*argv,"-strparse") == 0)
 			{
 			if (--argc < 1) goto bad;
-			sk_push(osk,*(++argv));
+			sk_OPENSSL_STRING_push(osk,*(++argv));
 			}
 		else if (strcmp(*argv,"-genstr") == 0)
 			{
@@ -302,18 +302,18 @@ bad:
 
 	/* If any structs to parse go through in sequence */
 
-	if (sk_num(osk))
+	if (sk_OPENSSL_STRING_num(osk))
 		{
 		tmpbuf=(unsigned char *)str;
 		tmplen=num;
-		for (i=0; i<sk_num(osk); i++)
+		for (i=0; i<sk_OPENSSL_STRING_num(osk); i++)
 			{
 			ASN1_TYPE *atmp;
 			int typ;
-			j=atoi(sk_value(osk,i));
+			j=atoi(sk_OPENSSL_STRING_value(osk,i));
 			if (j == 0)
 				{
-				BIO_printf(bio_err,"'%s' is an invalid number\n",sk_value(osk,i));
+				BIO_printf(bio_err,"'%s' is an invalid number\n",sk_OPENSSL_STRING_value(osk,i));
 				continue;
 				}
 			tmpbuf+=j;
@@ -378,7 +378,7 @@ end:
 		ERR_print_errors(bio_err);
 	if (buf != NULL) BUF_MEM_free(buf);
 	if (at != NULL) ASN1_TYPE_free(at);
-	if (osk != NULL) sk_free(osk);
+	if (osk != NULL) sk_OPENSSL_STRING_free(osk);
 	OBJ_cleanup();
 	apps_shutdown();
 	OPENSSL_EXIT(ret);

apps/ca.c

@@ -63,7 +63,6 @@
 #include <string.h>
 #include <ctype.h>
 #include <sys/types.h>
-#include <sys/stat.h>
 #include <openssl/conf.h>
 #include <openssl/bio.h>
 #include <openssl/err.h>
@@ -227,7 +226,7 @@ static int do_body(X509 **xret, EVP_PKEY *pkey, X509 *x509, const EVP_MD *dgst,
 static int do_revoke(X509 *x509, CA_DB *db, int ext, char *extval);
 static int get_certificate_status(const char *ser_status, CA_DB *db);
 static int do_updatedb(CA_DB *db);
-static int check_time_format(char *str);
+static int check_time_format(const char *str);
 char *make_revocation_str(int rev_type, char *rev_arg);
 int make_revoked(X509_REVOKED *rev, const char *str);
 int old_entry_print(BIO *bp, ASN1_OBJECT *obj, ASN1_STRING *str);
@@ -259,6 +258,7 @@ int MAIN(int argc, char **argv)
 	int doupdatedb=0;
 	long crldays=0;
 	long crlhours=0;
+	long crlsec=0;
 	long errorline= -1;
 	char *configfile=NULL;
 	char *md=NULL;
@@ -306,7 +306,8 @@ int MAIN(int argc, char **argv)
 	ASN1_TIME *tmptm;
 	ASN1_INTEGER *tmpser;
 	char *f;
-	const char *p, **pp;
+	const char *p;
+	char * const *pp;
 	int i,j;
 	const EVP_MD *dgst=NULL;
 	STACK_OF(CONF_VALUE) *attribs=NULL;
@@ -457,6 +458,11 @@ EF_ALIGNMENT=0;
 			if (--argc < 1) goto bad;
 			crlhours= atol(*(++argv));
 			}
+		else if (strcmp(*argv,"-crlsec") == 0)
+			{
+			if (--argc < 1) goto bad;
+			crlsec = atol(*(++argv));
+			}
 		else if (strcmp(*argv,"-infiles") == 0)
 			{
 			argc--;
@@ -550,8 +556,10 @@ bad:
 
 	if (badops)
 		{
-		for (pp=ca_usage; (*pp != NULL); pp++)
-			BIO_printf(bio_err,"%s",*pp);
+		const char **pp2;
+
+		for (pp2=ca_usage; (*pp2 != NULL); pp2++)
+			BIO_printf(bio_err,"%s",*pp2);
 		goto err;
 		}
 
@@ -826,7 +834,6 @@ bad:
 	/* lookup where to write new certificates */
 	if ((outdir == NULL) && (req))
 		{
-		struct stat sb;
 
 		if ((outdir=NCONF_get_string(conf,section,ENV_NEW_CERTS_DIR))
 			== NULL)
@@ -845,27 +852,23 @@ bad:
 	       that to access().  However, time's too short to do that just
 	       now.
 	    */
+#ifndef _WIN32
 		if (access(outdir,R_OK|W_OK|X_OK) != 0)
+#else
+		if (_access(outdir,R_OK|W_OK|X_OK) != 0)
+#endif
 			{
 			BIO_printf(bio_err,"I am unable to access the %s directory\n",outdir);
 			perror(outdir);
 			goto err;
 			}
 
-		if (stat(outdir,&sb) != 0)
-			{
-			BIO_printf(bio_err,"unable to stat(%s)\n",outdir);
-			perror(outdir);
-			goto err;
-			}
-#ifdef S_IFDIR
-		if (!(sb.st_mode & S_IFDIR))
+		if (app_isdir(outdir)<=0)
 			{
 			BIO_printf(bio_err,"%s need to be a directory\n",outdir);
 			perror(outdir);
 			goto err;
 			}
-#endif
 #endif
 		}
 
@@ -880,9 +883,9 @@ bad:
 	if (db == NULL) goto err;
 
 	/* Lets check some fields */
-	for (i=0; i<sk_num(db->db->data); i++)
+	for (i=0; i<sk_OPENSSL_PSTRING_num(db->db->data); i++)
 		{
-		pp=(const char **)sk_value(db->db->data,i);
+		pp=sk_OPENSSL_PSTRING_value(db->db->data,i);
 		if ((pp[DB_type][0] != DB_TYPE_REV) &&
 			(pp[DB_rev_date][0] != '\0'))
 			{
@@ -935,7 +938,7 @@ bad:
 #endif
 		TXT_DB_write(out,db->db);
 		BIO_printf(bio_err,"%d entries loaded from the database\n",
-			db->db->data->num);
+			   sk_OPENSSL_PSTRING_num(db->db->data));
 		BIO_printf(bio_err,"generating index\n");
 		}
 	
@@ -1026,6 +1029,17 @@ bad:
 		goto err;
 		}
 
+	if (!strcmp(md, "default"))
+		{
+		int def_nid;
+		if (EVP_PKEY_get_default_digest_nid(pkey, &def_nid) <= 0)
+			{
+			BIO_puts(bio_err,"no default digest\n");
+			goto err;
+			}
+		md = (char *)OBJ_nid2sn(def_nid);
+		}
+
 	if ((dgst=EVP_get_digestbyname(md)) == NULL)
 		{
 		BIO_printf(bio_err,"%s is an unsupported message digest type\n",md);
@@ -1095,9 +1109,9 @@ bad:
 			if (startdate == NULL)
 				ERR_clear_error();
 			}
-		if (startdate && !ASN1_UTCTIME_set_string(NULL,startdate))
+		if (startdate && !ASN1_TIME_set_string(NULL, startdate))
 			{
-			BIO_printf(bio_err,"start date is invalid, it should be YYMMDDHHMMSSZ\n");
+			BIO_printf(bio_err,"start date is invalid, it should be YYMMDDHHMMSSZ or YYYYMMDDHHMMSSZ\n");
 			goto err;
 			}
 		if (startdate == NULL) startdate="today";
@@ -1109,9 +1123,9 @@ bad:
 			if (enddate == NULL)
 				ERR_clear_error();
 			}
-		if (enddate && !ASN1_UTCTIME_set_string(NULL,enddate))
+		if (enddate && !ASN1_TIME_set_string(NULL, enddate))
 			{
-			BIO_printf(bio_err,"end date is invalid, it should be YYMMDDHHMMSSZ\n");
+			BIO_printf(bio_err,"end date is invalid, it should be YYMMDDHHMMSSZ or YYYYMMDDHHMMSSZ\n");
 			goto err;
 			}
 
@@ -1249,7 +1263,12 @@ bad:
 				BIO_printf(bio_err,"\n%d out of %d certificate requests certified, commit? [y/n]",total_done,total);
 				(void)BIO_flush(bio_err);
 				buf[0][0]='\0';
-				fgets(buf[0],10,stdin);
+				if (!fgets(buf[0],10,stdin))
+					{
+					BIO_printf(bio_err,"CERTIFICATION CANCELED: I/O error\n"); 
+					ret=0;
+					goto err;
+					}
 				if ((buf[0][0] != 'y') && (buf[0][0] != 'Y'))
 					{
 					BIO_printf(bio_err,"CERTIFICATION CANCELED\n"); 
@@ -1366,7 +1385,7 @@ bad:
 				goto err;
 				}
 
-		if (!crldays && !crlhours)
+		if (!crldays && !crlhours && !crlsec)
 			{
 			if (!NCONF_get_number(conf,section,
 				ENV_DEFAULT_CRL_DAYS, &crldays))
@@ -1375,7 +1394,7 @@ bad:
 				ENV_DEFAULT_CRL_HOURS, &crlhours))
 				crlhours = 0;
 			}
-		if ((crldays == 0) && (crlhours == 0))
+		if ((crldays == 0) && (crlhours == 0) && (crlsec == 0))
 			{
 			BIO_printf(bio_err,"cannot lookup how long until the next CRL is issued\n");
 			goto err;
@@ -1389,14 +1408,19 @@ bad:
 		if (!tmptm) goto err;
 		X509_gmtime_adj(tmptm,0);
 		X509_CRL_set_lastUpdate(crl, tmptm);	
-		X509_gmtime_adj(tmptm,(crldays*24+crlhours)*60*60);
+		if (!X509_time_adj_ex(tmptm, crldays, crlhours*60*60 + crlsec,
+			NULL))
+			{
+			BIO_puts(bio_err, "error setting CRL nextUpdate\n");
+			goto err;
+			}
 		X509_CRL_set_nextUpdate(crl, tmptm);	
 
 		ASN1_TIME_free(tmptm);
 
-		for (i=0; i<sk_num(db->db->data); i++)
+		for (i=0; i<sk_OPENSSL_PSTRING_num(db->db->data); i++)
 			{
-			pp=(const char **)sk_value(db->db->data,i);
+			pp=sk_OPENSSL_PSTRING_value(db->db->data,i);
 			if (pp[DB_type][0] == DB_TYPE_REV)
 				{
 				if ((r=X509_REVOKED_new()) == NULL) goto err;
@@ -1422,15 +1446,6 @@ bad:
 
 		/* we now have a CRL */
 		if (verbose) BIO_printf(bio_err,"signing CRL\n");
-#ifndef OPENSSL_NO_DSA
-		if (pkey->type == EVP_PKEY_DSA) 
-			dgst=EVP_dss1();
-		else
-#endif
-#ifndef OPENSSL_NO_ECDSA
-		if (pkey->type == EVP_PKEY_EC)
-			dgst=EVP_ecdsa();
-#endif
 
 		/* Add any extensions asked for */
 
@@ -1463,6 +1478,12 @@ bad:
 		if (crlnumberfile != NULL)	/* we have a CRL number that need updating */
 			if (!save_serial(crlnumberfile,"new",crlnumber,NULL)) goto err;
 
+		if (crlnumber)
+			{
+			BN_free(crlnumber);
+			crlnumber = NULL;
+			}
+
 		if (!X509_CRL_sign(crl,pkey,dgst)) goto err;
 
 		PEM_write_bio_X509_CRL(Sout,crl);
@@ -1515,6 +1536,7 @@ err:
 	if (free_key && key)
 		OPENSSL_free(key);
 	BN_free(serial);
+	BN_free(crlnumber);
 	free_index(db);
 	EVP_PKEY_free(pkey);
 	if (x509) X509_free(x509);
@@ -1673,7 +1695,9 @@ static int do_body(X509 **xret, EVP_PKEY *pkey, X509 *x509, const EVP_MD *dgst,
 	int ok= -1,i,j,last,nid;
 	const char *p;
 	CONF_VALUE *cv;
-	char *row[DB_NUMBER],**rrow=NULL,**irow=NULL;
+	OPENSSL_STRING row[DB_NUMBER];
+	OPENSSL_STRING *irow=NULL;
+	OPENSSL_STRING *rrow=NULL;
 	char buf[25];
 
 	tmptm=ASN1_UTCTIME_new();
@@ -1915,7 +1939,9 @@ again2:
 
 	if (db->attributes.unique_subject)
 		{
-		rrow=TXT_DB_get_by_index(db->db,DB_name,row);
+		OPENSSL_STRING *crow=row;
+
+		rrow=TXT_DB_get_by_index(db->db,DB_name,crow);
 		if (rrow != NULL)
 			{
 			BIO_printf(bio_err,
@@ -1991,11 +2017,11 @@ again2:
 
 	if (strcmp(startdate,"today") == 0)
 		X509_gmtime_adj(X509_get_notBefore(ret),0);
-	else ASN1_UTCTIME_set_string(X509_get_notBefore(ret),startdate);
+	else ASN1_TIME_set_string(X509_get_notBefore(ret),startdate);
 
 	if (enddate == NULL)
-		X509_gmtime_adj(X509_get_notAfter(ret),(long)60*60*24*days);
-	else ASN1_UTCTIME_set_string(X509_get_notAfter(ret),enddate);
+		X509_time_adj_ex(X509_get_notAfter(ret),days, 0, NULL);
+	else ASN1_TIME_set_string(X509_get_notAfter(ret),enddate);
 
 	if (!X509_set_subject_name(ret,subject)) goto err;
 
@@ -2091,7 +2117,7 @@ again2:
 		}
 
 	BIO_printf(bio_err,"Certificate is to be certified until ");
-	ASN1_UTCTIME_print(bio_err,X509_get_notAfter(ret));
+	ASN1_TIME_print(bio_err,X509_get_notAfter(ret));
 	if (days) BIO_printf(bio_err," (%ld days)",days);
 	BIO_printf(bio_err, "\n");
 
@@ -2101,7 +2127,12 @@ again2:
 		BIO_printf(bio_err,"Sign the certificate? [y/n]:");
 		(void)BIO_flush(bio_err);
 		buf[0]='\0';
-		fgets(buf,sizeof(buf)-1,stdin);
+		if (!fgets(buf,sizeof(buf)-1,stdin))
+			{
+			BIO_printf(bio_err,"CERTIFICATE WILL NOT BE CERTIFIED: I/O error\n");
+			ok=0;
+			goto err;
+			}
 		if (!((buf[0] == 'y') || (buf[0] == 'Y')))
 			{
 			BIO_printf(bio_err,"CERTIFICATE WILL NOT BE CERTIFIED\n");
@@ -2110,25 +2141,11 @@ again2:
 			}
 		}
 
-
-#ifndef OPENSSL_NO_DSA
-	if (pkey->type == EVP_PKEY_DSA) dgst=EVP_dss1();
 	pktmp=X509_get_pubkey(ret);
 	if (EVP_PKEY_missing_parameters(pktmp) &&
 		!EVP_PKEY_missing_parameters(pkey))
 		EVP_PKEY_copy_parameters(pktmp,pkey);
 	EVP_PKEY_free(pktmp);
-#endif
-#ifndef OPENSSL_NO_ECDSA
-	if (pkey->type == EVP_PKEY_EC)
-		dgst = EVP_ecdsa();
-	pktmp = X509_get_pubkey(ret);
-	if (EVP_PKEY_missing_parameters(pktmp) &&
-		!EVP_PKEY_missing_parameters(pkey))
-		EVP_PKEY_copy_parameters(pktmp, pkey);
-	EVP_PKEY_free(pktmp);
-#endif
-
 
 	if (!X509_sign(ret,pkey,dgst))
 		goto err;
@@ -2230,7 +2247,7 @@ static int certify_spkac(X509 **xret, char *infile, EVP_PKEY *pkey, X509 *x509,
 	     unsigned long nameopt, int default_op, int ext_copy)
 	{
 	STACK_OF(CONF_VALUE) *sk=NULL;
-	LHASH *parms=NULL;
+	LHASH_OF(CONF_VALUE) *parms=NULL;
 	X509_REQ *req=NULL;
 	CONF_VALUE *cv=NULL;
 	NETSCAPE_SPKI *spki = NULL;
@@ -2393,14 +2410,9 @@ static int fix_data(int nid, int *type)
 	return(1);
 	}
 
-static int check_time_format(char *str)
+static int check_time_format(const char *str)
 	{
-	ASN1_UTCTIME tm;
-
-	tm.data=(unsigned char *)str;
-	tm.length=strlen(str);
-	tm.type=V_ASN1_UTCTIME;
-	return(ASN1_UTCTIME_check(&tm));
+	return ASN1_TIME_set_string(NULL, str);
 	}
 
 static int do_revoke(X509 *x509, CA_DB *db, int type, char *value)
@@ -2415,6 +2427,8 @@ static int do_revoke(X509 *x509, CA_DB *db, int type, char *value)
 		row[i]=NULL;
 	row[DB_name]=X509_NAME_oneline(X509_get_subject_name(x509),NULL,0);
 	bn = ASN1_INTEGER_to_BN(X509_get_serialNumber(x509),NULL);
+	if (!bn)
+		goto err;
 	if (BN_is_zero(bn))
 		row[DB_serial]=BUF_strdup("00");
 	else
@@ -2484,7 +2498,7 @@ static int do_revoke(X509 *x509, CA_DB *db, int type, char *value)
 		goto err;
 
 		}
-	else if (index_name_cmp((const char **)row,(const char **)rrow))
+	else if (index_name_cmp_noconst(row, rrow))
 		{
 		BIO_printf(bio_err,"ERROR:name does not match %s\n",
 			   row[DB_name]);
@@ -2633,9 +2647,9 @@ static int do_updatedb (CA_DB *db)
 	else
 		a_y2k = 0;
 
-	for (i = 0; i < sk_num(db->db->data); i++)
+	for (i = 0; i < sk_OPENSSL_PSTRING_num(db->db->data); i++)
 		{
-		rrow = (char **) sk_value(db->db->data, i);
+		rrow = sk_OPENSSL_PSTRING_value(db->db->data, i);
 
 		if (rrow[DB_type][0] == 'V')
 		 	{

apps/ciphers.c

@@ -71,7 +71,8 @@
 
 static const char *ciphers_usage[]={
 "usage: ciphers args\n",
-" -v          - verbose mode, a textual listing of the ciphers in SSLeay\n",
+" -v          - verbose mode, a textual listing of the SSL/TLS ciphers in OpenSSL\n",
+" -V          - even more verbose\n",
 " -ssl2       - SSL2 mode\n",
 " -ssl3       - SSL3 mode\n",
 " -tls1       - TLS1 mode\n",
@@ -83,14 +84,14 @@ int MAIN(int, char **);
 int MAIN(int argc, char **argv)
 	{
 	int ret=1,i;
-	int verbose=0;
+	int verbose=0,Verbose=0;
 	const char **pp;
 	const char *p;
 	int badops=0;
 	SSL_CTX *ctx=NULL;
 	SSL *ssl=NULL;
 	char *ciphers=NULL;
-	SSL_METHOD *meth=NULL;
+	const SSL_METHOD *meth=NULL;
 	STACK_OF(SSL_CIPHER) *sk;
 	char buf[512];
 	BIO *STDout=NULL;
@@ -114,6 +115,8 @@ int MAIN(int argc, char **argv)
 	STDout = BIO_push(tmpbio, STDout);
 	}
 #endif
+	if (!load_config(bio_err, NULL))
+		goto end;
 
 	argc--;
 	argv++;
@@ -121,6 +124,8 @@ int MAIN(int argc, char **argv)
 		{
 		if (strcmp(*argv,"-v") == 0)
 			verbose=1;
+		else if (strcmp(*argv,"-V") == 0)
+			verbose=Verbose=1;
 #ifndef OPENSSL_NO_SSL2
 		else if (strcmp(*argv,"-ssl2") == 0)
 			meth=SSLv2_client_method();
@@ -179,15 +184,33 @@ int MAIN(int argc, char **argv)
 			}
 		BIO_printf(STDout,"\n");
 		}
-	else
+	else /* verbose */
 		{
 		sk=SSL_get_ciphers(ssl);
 
 		for (i=0; i<sk_SSL_CIPHER_num(sk); i++)
 			{
-			BIO_puts(STDout,SSL_CIPHER_description(
-				sk_SSL_CIPHER_value(sk,i),
-				buf,sizeof buf));
+			SSL_CIPHER *c;
+
+			c = sk_SSL_CIPHER_value(sk,i);
+			
+			if (Verbose)
+				{
+				unsigned long id = c->id;
+				int id0 = (int)(id >> 24);
+				int id1 = (int)((id >> 16) & 0xffL);
+				int id2 = (int)((id >> 8) & 0xffL);
+				int id3 = (int)(id & 0xffL);
+				
+				if ((id & 0xff000000L) == 0x02000000L)
+					BIO_printf(STDout, "     0x%02X,0x%02X,0x%02X - ", id1, id2, id3); /* SSL2 cipher */
+				else if ((id & 0xff000000L) == 0x03000000L)
+					BIO_printf(STDout, "          0x%02X,0x%02X - ", id2, id3); /* SSL3 cipher */
+				else
+					BIO_printf(STDout, "0x%02X,0x%02X,0x%02X,0x%02X - ", id0, id1, id2, id3); /* whatever */
+				}
+
+			BIO_puts(STDout,SSL_CIPHER_description(c,buf,sizeof buf));
 			}
 		}
 

apps/crl.c

@@ -85,6 +85,7 @@ static const char *crl_usage[]={
 " -issuer         - print issuer DN\n",
 " -lastupdate     - lastUpdate field\n",
 " -nextupdate     - nextUpdate field\n",
+" -crlnumber      - print CRL number\n",
 " -noout          - no CRL output\n",
 " -CAfile  name   - verify CRL using certificates in file \"name\"\n",
 " -CApath  dir    - verify CRL using certificates in \"dir\"\n",
@@ -107,7 +108,7 @@ int MAIN(int argc, char **argv)
 	int informat,outformat;
 	char *infile=NULL,*outfile=NULL;
 	int hash=0,issuer=0,lastupdate=0,nextupdate=0,noout=0,text=0;
-	int fingerprint = 0;
+	int fingerprint = 0, crlnumber = 0;
 	const char **pp;
 	X509_STORE *store = NULL;
 	X509_STORE_CTX ctx;
@@ -206,6 +207,8 @@ int MAIN(int argc, char **argv)
 			noout= ++num;
 		else if (strcmp(*argv,"-fingerprint") == 0)
 			fingerprint= ++num;
+		else if (strcmp(*argv,"-crlnumber") == 0)
+			crlnumber= ++num;
 		else if ((md_alg=EVP_get_digestbyname(*argv + 1)))
 			{
 			/* ok */
@@ -281,7 +284,21 @@ bad:
 				{
 				print_name(bio_out, "issuer=", X509_CRL_get_issuer(x), nmflag);
 				}
-
+			if (crlnumber == i)
+				{
+				ASN1_INTEGER *crlnum;
+				crlnum = X509_CRL_get_ext_d2i(x, NID_crl_number,
+							      NULL, NULL);
+				BIO_printf(bio_out,"crlNumber=");
+				if (crlnum)
+					{
+					i2a_ASN1_INTEGER(bio_out, crlnum);
+					ASN1_INTEGER_free(crlnum);
+					}
+				else
+					BIO_puts(bio_out, "<NONE>");
+				BIO_printf(bio_out,"\n");
+				}
 			if (hash == i)
 				{
 				BIO_printf(bio_out,"%08lx\n",

apps/crl2p7.c

@@ -63,7 +63,6 @@
 #include <stdio.h>
 #include <string.h>
 #include <sys/types.h>
-#include <sys/stat.h>
 #include "apps.h"
 #include <openssl/err.h>
 #include <openssl/evp.h>
@@ -93,7 +92,7 @@ int MAIN(int argc, char **argv)
 	PKCS7 *p7 = NULL;
 	PKCS7_SIGNED *p7s = NULL;
 	X509_CRL *crl=NULL;
-	STACK *certflst=NULL;
+	STACK_OF(OPENSSL_STRING) *certflst=NULL;
 	STACK_OF(X509_CRL) *crl_stack=NULL;
 	STACK_OF(X509) *cert_stack=NULL;
 	int ret=1,nocrl=0;
@@ -141,8 +140,8 @@ int MAIN(int argc, char **argv)
 		else if (strcmp(*argv,"-certfile") == 0)
 			{
 			if (--argc < 1) goto bad;
-			if(!certflst) certflst = sk_new_null();
-			sk_push(certflst,*(++argv));
+			if(!certflst) certflst = sk_OPENSSL_STRING_new_null();
+			sk_OPENSSL_STRING_push(certflst,*(++argv));
 			}
 		else
 			{
@@ -227,8 +226,8 @@ bad:
 	if ((cert_stack=sk_X509_new_null()) == NULL) goto end;
 	p7s->cert=cert_stack;
 
-	if(certflst) for(i = 0; i < sk_num(certflst); i++) {
-		certfile = sk_value(certflst, i);
+	if(certflst) for(i = 0; i < sk_OPENSSL_STRING_num(certflst); i++) {
+		certfile = sk_OPENSSL_STRING_value(certflst, i);
 		if (add_certs_from_file(cert_stack,certfile) < 0)
 			{
 			BIO_printf(bio_err, "error loading certificates\n");
@@ -237,7 +236,7 @@ bad:
 			}
 	}
 
-	sk_free(certflst);
+	sk_OPENSSL_STRING_free(certflst);
 
 	if (outfile == NULL)
 		{
@@ -295,19 +294,12 @@ end:
  */
 static int add_certs_from_file(STACK_OF(X509) *stack, char *certfile)
 	{
-	struct stat st;
 	BIO *in=NULL;
 	int count=0;
 	int ret= -1;
 	STACK_OF(X509_INFO) *sk=NULL;
 	X509_INFO *xi;
 
-	if ((stat(certfile,&st) != 0))
-		{
-		BIO_printf(bio_err,"unable to load the file, %s\n",certfile);
-		goto end;
-		}
-
 	in=BIO_new(BIO_s_file());
 	if ((in == NULL) || (BIO_read_filename(in,certfile) <= 0))
 		{

apps/dgst.c

@@ -75,8 +75,29 @@
 #define PROG	dgst_main
 
 int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
-	  EVP_PKEY *key, unsigned char *sigin, int siglen, const char *title,
-	  const char *file,BIO *bmd,const char *hmac_key);
+	  EVP_PKEY *key, unsigned char *sigin, int siglen,
+	  const char *sig_name, const char *md_name,
+	  const char *file,BIO *bmd);
+
+static void list_md_fn(const EVP_MD *m,
+			const char *from, const char *to, void *arg)
+	{
+	const char *mname;
+	/* Skip aliases */
+	if (!m)
+		return;
+	mname = OBJ_nid2ln(EVP_MD_type(m));
+	/* Skip shortnames */
+	if (strcmp(from, mname))
+		return;
+	/* Skip clones */
+	if (EVP_MD_flags(m) & EVP_MD_FLAG_PKEY_DIGEST)
+		return;
+	if (strchr(mname, ' '))
+		mname= EVP_MD_name(m);
+	BIO_printf(arg, "-%-14s to use the %s message digest algorithm\n",
+			mname, mname);
+	}
 
 int MAIN(int, char **);
 
@@ -84,12 +105,11 @@ int MAIN(int argc, char **argv)
 	{
 	ENGINE *e = NULL;
 	unsigned char *buf=NULL;
-	int i,err=0;
+	int i,err=1;
 	const EVP_MD *md=NULL,*m;
 	BIO *in=NULL,*inp;
 	BIO *bmd=NULL;
 	BIO *out = NULL;
-	const char *name;
 #define PROG_NAME_SIZE  39
 	char pname[PROG_NAME_SIZE+1];
 	int separator=0;
@@ -106,6 +126,8 @@ int MAIN(int argc, char **argv)
 	char *engine=NULL;
 #endif
 	char *hmac_key=NULL;
+	char *mac_name=NULL;
+	STACK_OF(OPENSSL_STRING) *sigopts = NULL, *macopts = NULL;
 
 	apps_startup();
 
@@ -133,6 +155,8 @@ int MAIN(int argc, char **argv)
 		if ((*argv)[0] != '-') break;
 		if (strcmp(*argv,"-c") == 0)
 			separator=1;
+		if (strcmp(*argv,"-r") == 0)
+			separator=2;
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) break;
@@ -182,6 +206,7 @@ int MAIN(int argc, char **argv)
 			{
 			if (--argc < 1) break;
 			engine= *(++argv);
+        		e = setup_engine(bio_err, engine, 0);
 			}
 #endif
 		else if (strcmp(*argv,"-hex") == 0)
@@ -196,6 +221,30 @@ int MAIN(int argc, char **argv)
 				break;
 			hmac_key=*++argv;
 			}
+		else if (!strcmp(*argv,"-mac"))
+			{
+			if (--argc < 1)
+				break;
+			mac_name=*++argv;
+			}
+		else if (strcmp(*argv,"-sigopt") == 0)
+			{
+			if (--argc < 1)
+				break;
+			if (!sigopts)
+				sigopts = sk_OPENSSL_STRING_new_null();
+			if (!sigopts || !sk_OPENSSL_STRING_push(sigopts, *(++argv)))
+				break;
+			}
+		else if (strcmp(*argv,"-macopt") == 0)
+			{
+			if (--argc < 1)
+				break;
+			if (!macopts)
+				macopts = sk_OPENSSL_STRING_new_null();
+			if (!macopts || !sk_OPENSSL_STRING_push(macopts, *(++argv)))
+				break;
+			}
 		else if ((m=EVP_get_digestbyname(&((*argv)[1]))) != NULL)
 			md=m;
 		else
@@ -204,12 +253,9 @@ int MAIN(int argc, char **argv)
 		argv++;
 		}
 
-	if (md == NULL)
-		md=EVP_md5();
 
 	if(do_verify && !sigfile) {
 		BIO_printf(bio_err, "No signature to verify: use the -signature option\n");
-		err = 1; 
 		goto end;
 	}
 
@@ -218,6 +264,7 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err,"unknown option '%s'\n",*argv);
 		BIO_printf(bio_err,"options are\n");
 		BIO_printf(bio_err,"-c              to output the digest with separating colons\n");
+		BIO_printf(bio_err,"-r              to output the digest in coreutils format\n");
 		BIO_printf(bio_err,"-d              to output debug info\n");
 		BIO_printf(bio_err,"-hex            output as hex dump\n");
 		BIO_printf(bio_err,"-binary         output in binary form\n");
@@ -225,48 +272,20 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err,"-verify file    verify a signature using public key in file\n");
 		BIO_printf(bio_err,"-prverify file  verify a signature using private key in file\n");
 		BIO_printf(bio_err,"-keyform arg    key file format (PEM or ENGINE)\n");
+		BIO_printf(bio_err,"-out filename   output to filename rather than stdout\n");
 		BIO_printf(bio_err,"-signature file signature to verify\n");
-		BIO_printf(bio_err,"-binary         output in binary form\n");
+		BIO_printf(bio_err,"-sigopt nm:v    signature parameter\n");
+		BIO_printf(bio_err,"-hmac key       create hashed MAC with key\n");
+		BIO_printf(bio_err,"-mac algorithm  create MAC (not neccessarily HMAC)\n"); 
+		BIO_printf(bio_err,"-macopt nm:v    MAC algorithm parameters or key\n");
 #ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err,"-engine e       use engine e, possibly a hardware device.\n");
 #endif
 
-		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm (default)\n",
-			LN_md5,LN_md5);
-		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
-			LN_md4,LN_md4);
-		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
-			LN_md2,LN_md2);
-#ifndef OPENSSL_NO_SHA
-		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
-			LN_sha1,LN_sha1);
-		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
-			LN_sha,LN_sha);
-#ifndef OPENSSL_NO_SHA256
-		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
-			LN_sha224,LN_sha224);
-		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
-			LN_sha256,LN_sha256);
-#endif
-#ifndef OPENSSL_NO_SHA512
-		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
-			LN_sha384,LN_sha384);
-		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
-			LN_sha512,LN_sha512);
-#endif
-#endif
-		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
-			LN_mdc2,LN_mdc2);
-		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
-			LN_ripemd160,LN_ripemd160);
-		err=1;
+		EVP_MD_do_all_sorted(list_md_fn, bio_err);
 		goto end;
 		}
 
-#ifndef OPENSSL_NO_ENGINE
-        e = setup_engine(bio_err, engine, 0);
-#endif
-
 	in=BIO_new(BIO_s_file());
 	bmd=BIO_new(BIO_f_md());
 	if (debug)
@@ -289,8 +308,10 @@ int MAIN(int argc, char **argv)
 		}
 
 	if(out_bin == -1) {
-		if(keyfile) out_bin = 1;
-		else out_bin = 0;
+		if(keyfile)
+			out_bin = 1;
+		else
+			out_bin = 0;
 	}
 
 	if(randfile)
@@ -316,6 +337,11 @@ int MAIN(int argc, char **argv)
 		ERR_print_errors(bio_err);
 		goto end;
 	}
+	if ((!!mac_name + !!keyfile + !!hmac_key) > 1)
+		{
+		BIO_printf(bio_err, "MAC and Signing key cannot both be specified\n");
+		goto end;
+		}
 
 	if(keyfile)
 		{
@@ -333,6 +359,101 @@ int MAIN(int argc, char **argv)
 			}
 		}
 
+	if (mac_name)
+		{
+		EVP_PKEY_CTX *mac_ctx = NULL;
+		int r = 0;
+		if (!init_gen_str(bio_err, &mac_ctx, mac_name,e, 0))
+			goto mac_end;
+		if (macopts)
+			{
+			char *macopt;
+			for (i = 0; i < sk_OPENSSL_STRING_num(macopts); i++)
+				{
+				macopt = sk_OPENSSL_STRING_value(macopts, i);
+				if (pkey_ctrl_string(mac_ctx, macopt) <= 0)
+					{
+					BIO_printf(bio_err,
+						"MAC parameter error \"%s\"\n",
+						macopt);
+					ERR_print_errors(bio_err);
+					goto mac_end;
+					}
+				}
+			}
+		if (EVP_PKEY_keygen(mac_ctx, &sigkey) <= 0)
+			{
+			BIO_puts(bio_err, "Error generating key\n");
+			ERR_print_errors(bio_err);
+			goto mac_end;
+			}
+		r = 1;
+		mac_end:
+		if (mac_ctx)
+			EVP_PKEY_CTX_free(mac_ctx);
+		if (r == 0)
+			goto end;
+		}
+
+	if (hmac_key)
+		{
+		sigkey = EVP_PKEY_new_mac_key(EVP_PKEY_HMAC, e,
+					(unsigned char *)hmac_key, -1);
+		if (!sigkey)
+			goto end;
+		}
+
+	if (sigkey)
+		{
+		EVP_MD_CTX *mctx = NULL;
+		EVP_PKEY_CTX *pctx = NULL;
+		int r;
+		if (!BIO_get_md_ctx(bmd, &mctx))
+			{
+			BIO_printf(bio_err, "Error getting context\n");
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+		if (do_verify)
+			r = EVP_DigestVerifyInit(mctx, &pctx, md, e, sigkey);
+		else
+			r = EVP_DigestSignInit(mctx, &pctx, md, e, sigkey);
+		if (!r)
+			{
+			BIO_printf(bio_err, "Error setting context\n");
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+		if (sigopts)
+			{
+			char *sigopt;
+			for (i = 0; i < sk_OPENSSL_STRING_num(sigopts); i++)
+				{
+				sigopt = sk_OPENSSL_STRING_value(sigopts, i);
+				if (pkey_ctrl_string(pctx, sigopt) <= 0)
+					{
+					BIO_printf(bio_err,
+						"parameter error \"%s\"\n",
+						sigopt);
+					ERR_print_errors(bio_err);
+					goto end;
+					}
+				}
+			}
+		}
+	/* we use md as a filter, reading from 'in' */
+	else
+		{
+		if (md == NULL)
+			md = EVP_md5(); 
+		if (!BIO_set_md(bmd,md))
+			{
+			BIO_printf(bio_err, "Error setting digest %s\n", pname);
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+		}
+
 	if(sigfile && sigkey) {
 		BIO *sigbio;
 		sigbio = BIO_new_file(sigfile, "rb");
@@ -353,54 +474,51 @@ int MAIN(int argc, char **argv)
 			goto end;
 		}
 	}
-		
-
-
-	/* we use md as a filter, reading from 'in' */
-	if (!BIO_set_md(bmd,md))
-		{
-		BIO_printf(bio_err, "Error setting digest %s\n", pname);
-		ERR_print_errors(bio_err);
-		goto end;
-		}
-		
 	inp=BIO_push(bmd,in);
 
+	if (md == NULL)
+		{
+		EVP_MD_CTX *tctx;
+		BIO_get_md_ctx(bmd, &tctx);
+		md = EVP_MD_CTX_md(tctx);
+		}
+
 	if (argc == 0)
 		{
 		BIO_set_fp(in,stdin,BIO_NOCLOSE);
 		err=do_fp(out, buf,inp,separator, out_bin, sigkey, sigbuf,
-			  siglen,"","(stdin)",bmd,hmac_key);
+			  siglen,NULL,NULL,"stdin",bmd);
 		}
 	else
 		{
-		name=OBJ_nid2sn(md->type);
+		const char *md_name = NULL, *sig_name = NULL;
+		if(!out_bin)
+			{
+			if (sigkey)
+				{
+				const EVP_PKEY_ASN1_METHOD *ameth;
+				ameth = EVP_PKEY_get0_asn1(sigkey);
+				if (ameth)
+					EVP_PKEY_asn1_get0_info(NULL, NULL,
+						NULL, NULL, &sig_name, ameth);
+				}
+			md_name = EVP_MD_name(md);
+			}
+		err = 0;
 		for (i=0; i<argc; i++)
 			{
-			char *tmp,*tofree=NULL;
 			int r;
-
 			if (BIO_read_filename(in,argv[i]) <= 0)
 				{
 				perror(argv[i]);
 				err++;
 				continue;
 				}
-			if(!out_bin)
-				{
-				size_t len = strlen(name)+strlen(argv[i])+(hmac_key ? 5 : 0)+5;
-				tmp=tofree=OPENSSL_malloc(len);
-				BIO_snprintf(tmp,len,"%s%s(%s)= ",
-							 hmac_key ? "HMAC-" : "",name,argv[i]);
-				}
 			else
-				tmp="";
 			r=do_fp(out,buf,inp,separator,out_bin,sigkey,sigbuf,
-				siglen,tmp,argv[i],bmd,hmac_key);
+				siglen,sig_name,md_name, argv[i],bmd);
 			if(r)
 			    err=r;
-			if(tofree)
-				OPENSSL_free(tofree);
 			(void)BIO_reset(bmd);
 			}
 		}
@@ -415,6 +533,10 @@ end:
 		OPENSSL_free(passin);
 	BIO_free_all(out);
 	EVP_PKEY_free(sigkey);
+	if (sigopts)
+		sk_OPENSSL_STRING_free(sigopts);
+	if (macopts)
+		sk_OPENSSL_STRING_free(macopts);
 	if(sigbuf) OPENSSL_free(sigbuf);
 	if (bmd != NULL) BIO_free(bmd);
 	apps_shutdown();
@@ -422,24 +544,13 @@ end:
 	}
 
 int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
-	  EVP_PKEY *key, unsigned char *sigin, int siglen, const char *title,
-	  const char *file,BIO *bmd,const char *hmac_key)
+	  EVP_PKEY *key, unsigned char *sigin, int siglen,
+	  const char *sig_name, const char *md_name,
+	  const char *file,BIO *bmd)
 	{
-	unsigned int len;
+	size_t len;
 	int i;
-	EVP_MD_CTX *md_ctx;
-	HMAC_CTX hmac_ctx;
 
-	if (hmac_key)
-		{
-		EVP_MD *md;
-
-		BIO_get_md(bmd,&md);
-		HMAC_CTX_init(&hmac_ctx);
-		HMAC_Init_ex(&hmac_ctx,hmac_key,strlen(hmac_key),md, NULL);
-		BIO_get_md_ctx(bmd,&md_ctx);
-		BIO_set_md_ctx(bmd,&hmac_ctx.md_ctx);
-		}
 	for (;;)
 		{
 		i=BIO_read(bp,(char *)buf,BUFSIZE);
@@ -455,7 +566,7 @@ int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 		{
 		EVP_MD_CTX *ctx;
 		BIO_get_md_ctx(bp, &ctx);
-		i = EVP_VerifyFinal(ctx, sigin, (unsigned int)siglen, key); 
+		i = EVP_DigestVerifyFinal(ctx, sigin, (unsigned int)siglen); 
 		if(i > 0)
 			BIO_printf(out, "Verified OK\n");
 		else if(i == 0)
@@ -475,25 +586,39 @@ int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 		{
 		EVP_MD_CTX *ctx;
 		BIO_get_md_ctx(bp, &ctx);
-		if(!EVP_SignFinal(ctx, buf, (unsigned int *)&len, key)) 
+		len = BUFSIZE;
+		if(!EVP_DigestSignFinal(ctx, buf, &len)) 
 			{
 			BIO_printf(bio_err, "Error Signing Data\n");
 			ERR_print_errors(bio_err);
 			return 1;
 			}
 		}
-	else if(hmac_key)
-		{
-		HMAC_Final(&hmac_ctx,buf,&len);
-		HMAC_CTX_cleanup(&hmac_ctx);
-		}
 	else
+		{
 		len=BIO_gets(bp,(char *)buf,BUFSIZE);
+		if ((int)len <0)
+			{
+			ERR_print_errors(bio_err);
+			return 1;
+			}
+		}
 
 	if(binout) BIO_write(out, buf, len);
+	else if (sep == 2)
+		{
+		for (i=0; i<(int)len; i++)
+			BIO_printf(out, "%02x",buf[i]);
+		BIO_printf(out, " *%s\n", file);
+		}
 	else 
 		{
-		BIO_write(out,title,strlen(title));
+		if (sig_name)
+			BIO_printf(out, "%s-%s(%s)= ", sig_name, md_name, file);
+		else if (md_name)
+			BIO_printf(out, "%s(%s)= ", md_name, file);
+		else
+			BIO_printf(out, "(%s)= ", file);
 		for (i=0; i<(int)len; i++)
 			{
 			if (sep && (i != 0))
@@ -502,10 +627,6 @@ int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 			}
 		BIO_printf(out, "\n");
 		}
-	if (hmac_key)
-		{
-		BIO_set_md_ctx(bmd,md_ctx);
-		}
 	return 0;
 	}
 

apps/dh.c

@@ -349,4 +349,10 @@ end:
 	apps_shutdown();
 	OPENSSL_EXIT(ret);
 	}
+#else /* !OPENSSL_NO_DH */
+
+# if PEDANTIC
+static void *dummy=&dummy;
+# endif
+
 #endif

apps/dhparam.c

@@ -554,4 +554,10 @@ static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb)
 	return 1;
 	}
 
+#else /* !OPENSSL_NO_DH */
+
+# if PEDANTIC
+static void *dummy=&dummy;
+# endif
+
 #endif

apps/dsa.c

@@ -96,9 +96,7 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
-#endif
 	int ret=1;
 	DSA *dsa=NULL;
 	int i,badops=0;
@@ -114,6 +112,8 @@ int MAIN(int argc, char **argv)
 	char *passin = NULL, *passout = NULL;
 	int modulus=0;
 
+	int pvk_encr = 2;
+
 	apps_startup();
 
 	if (bio_err == NULL)
@@ -173,6 +173,12 @@ int MAIN(int argc, char **argv)
 			engine= *(++argv);
 			}
 #endif
+		else if (strcmp(*argv,"-pvk-strong") == 0)
+			pvk_encr=2;
+		else if (strcmp(*argv,"-pvk-weak") == 0)
+			pvk_encr=1;
+		else if (strcmp(*argv,"-pvk-none") == 0)
+			pvk_encr=0;
 		else if (strcmp(*argv,"-noout") == 0)
 			noout=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -260,16 +266,22 @@ bad:
 		}
 
 	BIO_printf(bio_err,"read DSA key\n");
-	if	(informat == FORMAT_ASN1) {
-		if(pubin) dsa=d2i_DSA_PUBKEY_bio(in,NULL);
-		else dsa=d2i_DSAPrivateKey_bio(in,NULL);
-	} else if (informat == FORMAT_PEM) {
-		if(pubin) dsa=PEM_read_bio_DSA_PUBKEY(in,NULL, NULL, NULL);
-		else dsa=PEM_read_bio_DSAPrivateKey(in,NULL,NULL,passin);
-	} else
+
 		{
-		BIO_printf(bio_err,"bad input format specified for key\n");
-		goto end;
+		EVP_PKEY	*pkey;
+
+		if (pubin)
+			pkey = load_pubkey(bio_err, infile, informat, 1,
+				passin, e, "Public Key");
+		else
+			pkey = load_key(bio_err, infile, informat, 1,
+				passin, e, "Private Key");
+
+		if (pkey)
+			{
+			dsa = EVP_PKEY_get1_DSA(pkey);
+			EVP_PKEY_free(pkey);
+			}
 		}
 	if (dsa == NULL)
 		{
@@ -322,11 +334,24 @@ bad:
 			i=PEM_write_bio_DSA_PUBKEY(out,dsa);
 		else i=PEM_write_bio_DSAPrivateKey(out,dsa,enc,
 							NULL,0,NULL, passout);
+#ifndef OPENSSL_NO_RSA
+	} else if (outformat == FORMAT_MSBLOB || outformat == FORMAT_PVK) {
+		EVP_PKEY *pk;
+		pk = EVP_PKEY_new();
+		EVP_PKEY_set1_DSA(pk, dsa);
+		if (outformat == FORMAT_PVK)
+			i = i2b_PVK_bio(out, pk, pvk_encr, 0, passout);
+		else if (pubin || pubout)
+			i = i2b_PublicKey_bio(out, pk);
+		else
+			i = i2b_PrivateKey_bio(out, pk);
+		EVP_PKEY_free(pk);
+#endif
 	} else {
 		BIO_printf(bio_err,"bad output format specified for outfile\n");
 		goto end;
 		}
-	if (!i)
+	if (i <= 0)
 		{
 		BIO_printf(bio_err,"unable to write private key\n");
 		ERR_print_errors(bio_err);
@@ -342,4 +367,10 @@ end:
 	apps_shutdown();
 	OPENSSL_EXIT(ret);
 	}
+#else /* !OPENSSL_NO_DSA */
+
+# if PEDANTIC
+static void *dummy=&dummy;
+# endif
+
 #endif

apps/dsaparam.c

@@ -475,4 +475,10 @@ static int MS_CALLBACK dsa_cb(int p, int n, BN_GENCB *cb)
 #endif
 	return 1;
 	}
+#else /* !OPENSSL_NO_DSA */
+
+# if PEDANTIC
+static void *dummy=&dummy;
+# endif
+
 #endif

apps/ec.c

@@ -244,7 +244,7 @@ bad:
 				" the ec parameters are encoded\n");
 		BIO_printf(bio_err, "                 in the asn1 der "
 				"encoding\n");
-		BIO_printf(bio_err, "                 possilbe values:"
+		BIO_printf(bio_err, "                 possible values:"
 				" named_curve (default)\n");
 		BIO_printf(bio_err,"                                  "
 				"explicit\n");
@@ -400,4 +400,10 @@ end:
 	apps_shutdown();
 	OPENSSL_EXIT(ret);
 }
+#else /* !OPENSSL_NO_EC */
+
+# if PEDANTIC
+static void *dummy=&dummy;
+# endif
+
 #endif

apps/ecparam.c

@@ -725,4 +725,10 @@ static int ecparam_print_var(BIO *out, BIGNUM *in, const char *var,
 	BIO_printf(out, "\n\t};\n\n");
 	return 1;
 	}
+#else /* !OPENSSL_NO_EC */
+
+# if PEDANTIC
+static void *dummy=&dummy;
+# endif
+
 #endif

apps/enc.c

@@ -67,6 +67,7 @@
 #include <openssl/x509.h>
 #include <openssl/rand.h>
 #include <openssl/pem.h>
+#include <openssl/comp.h>
 #include <ctype.h>
 
 int set_hex(char *in,unsigned char *out,int size);
@@ -116,6 +117,10 @@ int MAIN(int argc, char **argv)
 	char *hkey=NULL,*hiv=NULL,*hsalt = NULL;
 	char *md=NULL;
 	int enc=1,printkey=0,i,base64=0;
+#ifdef ZLIB
+	int do_zlib=0;
+	BIO *bzl = NULL;
+#endif
 	int debug=0,olb64=0,nosalt=0;
 	const EVP_CIPHER *cipher=NULL,*c;
 	EVP_CIPHER_CTX *ctx = NULL;
@@ -141,9 +146,18 @@ int MAIN(int argc, char **argv)
 	program_name(argv[0],pname,sizeof pname);
 	if (strcmp(pname,"base64") == 0)
 		base64=1;
+#ifdef ZLIB
+	if (strcmp(pname,"zlib") == 0)
+		do_zlib=1;
+#endif
 
 	cipher=EVP_get_cipherbyname(pname);
+#ifdef ZLIB
+	if (!do_zlib && !base64 && (cipher == NULL)
+				&& (strcmp(pname,"enc") != 0))
+#else
 	if (!base64 && (cipher == NULL) && (strcmp(pname,"enc") != 0))
+#endif
 		{
 		BIO_printf(bio_err,"%s is an unknown cipher\n",pname);
 		goto bad;
@@ -199,6 +213,10 @@ int MAIN(int argc, char **argv)
 			base64=1;
 		else if	(strcmp(*argv,"-base64") == 0)
 			base64=1;
+#ifdef ZLIB
+		else if	(strcmp(*argv,"-z") == 0)
+			do_zlib=1;
+#endif
 		else if (strcmp(*argv,"-bufsize") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -225,7 +243,12 @@ int MAIN(int argc, char **argv)
 				goto bad;
 				}
 			buf[0]='\0';
-			fgets(buf,sizeof buf,infile);
+			if (!fgets(buf,sizeof buf,infile))
+				{
+				BIO_printf(bio_err,"unable to read key from '%s'\n",
+					file);
+				goto bad;
+				}
 			fclose(infile);
 			i=strlen(buf);
 			if ((i > 0) &&
@@ -283,9 +306,11 @@ bad:
 			BIO_printf(bio_err,"%-14s passphrase is the first line of the file argument\n","-kfile");
 			BIO_printf(bio_err,"%-14s the next argument is the md to use to create a key\n","-md");
 			BIO_printf(bio_err,"%-14s   from a passphrase.  One of md2, md5, sha or sha1\n","");
+			BIO_printf(bio_err,"%-14s salt in hex is the next argument\n","-S");
 			BIO_printf(bio_err,"%-14s key/iv in hex is the next argument\n","-K/-iv");
 			BIO_printf(bio_err,"%-14s print the iv/key (then exit if -P)\n","-[pP]");
 			BIO_printf(bio_err,"%-14s buffer size\n","-bufsize <n>");
+			BIO_printf(bio_err,"%-14s disable standard block padding\n","-nopad");
 #ifndef OPENSSL_NO_ENGINE
 			BIO_printf(bio_err,"%-14s use engine e, possibly a hardware device.\n","-engine e");
 #endif
@@ -446,6 +471,19 @@ bad:
 	rbio=in;
 	wbio=out;
 
+#ifdef ZLIB
+
+	if (do_zlib)
+		{
+		if ((bzl=BIO_new(BIO_f_zlib())) == NULL)
+			goto end;
+		if (enc)
+			wbio=BIO_push(bzl,wbio);
+		else
+			rbio=BIO_push(bzl,rbio);
+		}
+#endif
+
 	if (base64)
 		{
 		if ((b64=BIO_new(BIO_f_base64())) == NULL)
@@ -527,7 +565,8 @@ bad:
 			BIO_printf(bio_err,"invalid hex iv value\n");
 			goto end;
 			}
-		if ((hiv == NULL) && (str == NULL))
+		if ((hiv == NULL) && (str == NULL)
+		    && EVP_CIPHER_iv_length(cipher) != 0)
 			{
 			/* No IV was explicitly set and no IV was generated
 			 * during EVP_BytesToKey. Hence the IV is undefined,
@@ -639,6 +678,9 @@ end:
 	if (out != NULL) BIO_free_all(out);
 	if (benc != NULL) BIO_free(benc);
 	if (b64 != NULL) BIO_free(b64);
+#ifdef ZLIB
+	if (bzl != NULL) BIO_free(bzl);
+#endif
 	if(pass) OPENSSL_free(pass);
 	apps_shutdown();
 	OPENSSL_EXIT(ret);

apps/engine.c

@@ -56,7 +56,6 @@
  *
  */
 
-#ifndef OPENSSL_NO_ENGINE
 
 #include <stdio.h>
 #include <stdlib.h>
@@ -66,6 +65,7 @@
 #endif
 #include "apps.h"
 #include <openssl/err.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
 #include <openssl/ssl.h>
 
@@ -92,7 +92,7 @@ static const char *engine_usage[]={
 NULL
 };
 
-static void identity(void *ptr)
+static void identity(char *ptr)
 	{
 	return;
 	}
@@ -148,11 +148,6 @@ static int util_flags(BIO *bio_out, unsigned int flags, const char *indent)
 
 	if(flags & ENGINE_CMD_FLAG_NUMERIC)
 		{
-		if(started)
-			{
-			BIO_printf(bio_out, "|");
-			err = 1;
-			}
 		BIO_printf(bio_out, "NUMERIC");
 		started = 1;
 		}
@@ -205,7 +200,7 @@ static int util_verbose(ENGINE *e, int verbose, BIO *bio_out, const char *indent
 	char *desc = NULL;
 	int flags;
 	int xpos = 0;
-	STACK *cmds = NULL;
+	STACK_OF(OPENSSL_STRING) *cmds = NULL;
 	if(!ENGINE_ctrl(e, ENGINE_CTRL_HAS_CTRL_FUNCTION, 0, NULL, NULL) ||
 			((num = ENGINE_ctrl(e, ENGINE_CTRL_GET_FIRST_CMD_TYPE,
 					0, NULL, NULL)) <= 0))
@@ -216,7 +211,7 @@ static int util_verbose(ENGINE *e, int verbose, BIO *bio_out, const char *indent
 		return 1;
 		}
 
-	cmds = sk_new_null();
+	cmds = sk_OPENSSL_STRING_new_null();
 
 	if(!cmds)
 		goto err;
@@ -252,7 +247,7 @@ static int util_verbose(ENGINE *e, int verbose, BIO *bio_out, const char *indent
                         /* Now decide on the output */
                         if(xpos == 0)
                                 /* Do an indent */
-                                xpos = BIO_printf(bio_out, indent);
+                                xpos = BIO_puts(bio_out, indent);
                         else
                                 /* Otherwise prepend a ", " */
                                 xpos += BIO_printf(bio_out, ", ");
@@ -263,7 +258,7 @@ static int util_verbose(ENGINE *e, int verbose, BIO *bio_out, const char *indent
 					(xpos + (int)strlen(name) > line_wrap))
                                         {
                                         BIO_printf(bio_out, "\n");
-                                        xpos = BIO_printf(bio_out, indent);
+                                        xpos = BIO_puts(bio_out, indent);
                                         }
                                 xpos += BIO_printf(bio_out, "%s", name);
                                 }
@@ -289,15 +284,17 @@ static int util_verbose(ENGINE *e, int verbose, BIO *bio_out, const char *indent
 		BIO_printf(bio_out, "\n");
 	ret = 1;
 err:
-	if(cmds) sk_pop_free(cmds, identity);
+	if(cmds) sk_OPENSSL_STRING_pop_free(cmds, identity);
 	if(name) OPENSSL_free(name);
 	if(desc) OPENSSL_free(desc);
 	return ret;
 	}
 
-static void util_do_cmds(ENGINE *e, STACK *cmds, BIO *bio_out, const char *indent)
+static void util_do_cmds(ENGINE *e, STACK_OF(OPENSSL_STRING) *cmds,
+			BIO *bio_out, const char *indent)
 	{
-	int loop, res, num = sk_num(cmds);
+	int loop, res, num = sk_OPENSSL_STRING_num(cmds);
+
 	if(num < 0)
 		{
 		BIO_printf(bio_out, "[Error]: internal stack error\n");
@@ -307,7 +304,7 @@ static void util_do_cmds(ENGINE *e, STACK *cmds, BIO *bio_out, const char *inden
 		{
 		char buf[256];
 		const char *cmd, *arg;
-		cmd = sk_value(cmds, loop);
+		cmd = sk_OPENSSL_STRING_value(cmds, loop);
 		res = 1; /* assume success */
 		/* Check if this command has no ":arg" */
 		if((arg = strstr(cmd, ":")) == NULL)
@@ -347,9 +344,9 @@ int MAIN(int argc, char **argv)
 	const char **pp;
 	int verbose=0, list_cap=0, test_avail=0, test_avail_noise = 0;
 	ENGINE *e;
-	STACK *engines = sk_new_null();
-	STACK *pre_cmds = sk_new_null();
-	STACK *post_cmds = sk_new_null();
+	STACK_OF(OPENSSL_STRING) *engines = sk_OPENSSL_STRING_new_null();
+	STACK_OF(OPENSSL_STRING) *pre_cmds = sk_OPENSSL_STRING_new_null();
+	STACK_OF(OPENSSL_STRING) *post_cmds = sk_OPENSSL_STRING_new_null();
 	int badops=1;
 	BIO *bio_out=NULL;
 	const char *indent = "     ";
@@ -396,20 +393,20 @@ int MAIN(int argc, char **argv)
 			argc--; argv++;
 			if (argc == 0)
 				goto skip_arg_loop;
-			sk_push(pre_cmds,*argv);
+			sk_OPENSSL_STRING_push(pre_cmds,*argv);
 			}
 		else if (strcmp(*argv,"-post") == 0)
 			{
 			argc--; argv++;
 			if (argc == 0)
 				goto skip_arg_loop;
-			sk_push(post_cmds,*argv);
+			sk_OPENSSL_STRING_push(post_cmds,*argv);
 			}
 		else if ((strncmp(*argv,"-h",2) == 0) ||
 				(strcmp(*argv,"-?") == 0))
 			goto skip_arg_loop;
 		else
-			sk_push(engines,*argv);
+			sk_OPENSSL_STRING_push(engines,*argv);
 		argc--;
 		argv++;
 		}
@@ -424,17 +421,17 @@ skip_arg_loop:
 		goto end;
 		}
 
-	if (sk_num(engines) == 0)
+	if (sk_OPENSSL_STRING_num(engines) == 0)
 		{
 		for(e = ENGINE_get_first(); e != NULL; e = ENGINE_get_next(e))
 			{
-			sk_push(engines,(char *)ENGINE_get_id(e));
+			sk_OPENSSL_STRING_push(engines,(char *)ENGINE_get_id(e));
 			}
 		}
 
-	for (i=0; i<sk_num(engines); i++)
+	for (i=0; i<sk_OPENSSL_STRING_num(engines); i++)
 		{
-		const char *id = sk_value(engines,i);
+		const char *id = sk_OPENSSL_STRING_value(engines,i);
 		if ((e = ENGINE_by_id(id)) != NULL)
 			{
 			const char *name = ENGINE_get_name(e);
@@ -454,6 +451,7 @@ skip_arg_loop:
 				const int *nids;
 				ENGINE_CIPHERS_PTR fn_c;
 				ENGINE_DIGESTS_PTR fn_d;
+				ENGINE_PKEY_METHS_PTR fn_pk;
 
 				if (ENGINE_get_RSA(e) != NULL
 					&& !append_buf(&cap_buf, "RSA",
@@ -492,6 +490,15 @@ skip_ciphers:
 						goto end;
 
 skip_digests:
+				fn_pk = ENGINE_get_pkey_meths(e);
+				if(!fn_pk) goto skip_pmeths;
+				n = fn_pk(e, NULL, &nids, 0);
+				for(k=0 ; k < n ; ++k)
+					if(!append_buf(&cap_buf,
+						       OBJ_nid2sn(nids[k]),
+						       &cap_size, 256))
+						goto end;
+skip_pmeths:
 				if (cap_buf && (*cap_buf != '\0'))
 					BIO_printf(bio_out, " [%s]\n", cap_buf);
 
@@ -526,9 +533,9 @@ skip_digests:
 end:
 
 	ERR_print_errors(bio_err);
-	sk_pop_free(engines, identity);
-	sk_pop_free(pre_cmds, identity);
-	sk_pop_free(post_cmds, identity);
+	sk_OPENSSL_STRING_pop_free(engines, identity);
+	sk_OPENSSL_STRING_pop_free(pre_cmds, identity);
+	sk_OPENSSL_STRING_pop_free(post_cmds, identity);
 	if (bio_out != NULL) BIO_free_all(bio_out);
 	apps_shutdown();
 	OPENSSL_EXIT(ret);

apps/errstr.c

@@ -97,10 +97,12 @@ int MAIN(int argc, char **argv)
 			out = BIO_push(tmpbio, out);
 			}
 #endif
-			lh_node_stats_bio((LHASH *)ERR_get_string_table(),out);
-			lh_stats_bio((LHASH *)ERR_get_string_table(),out);
-			lh_node_usage_stats_bio((LHASH *)
-				ERR_get_string_table(),out);
+			lh_ERR_STRING_DATA_node_stats_bio(
+						  ERR_get_string_table(), out);
+			lh_ERR_STRING_DATA_stats_bio(ERR_get_string_table(),
+						     out);
+			lh_ERR_STRING_DATA_node_usage_stats_bio(
+						    ERR_get_string_table(),out);
 			}
 		if (out != NULL) BIO_free_all(out);
 		argc--;

apps/gendh.c

@@ -235,4 +235,10 @@ static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb)
 #endif
 	return 1;
 	}
+#else /* !OPENSSL_NO_DH */
+
+# if PEDANTIC
+static void *dummy=&dummy;
+# endif
+
 #endif

apps/gendsa.c

@@ -279,4 +279,10 @@ end:
 	apps_shutdown();
 	OPENSSL_EXIT(ret);
 	}
+#else /* !OPENSSL_NO_DSA */
+
+# if PEDANTIC
+static void *dummy=&dummy;
+# endif
+
 #endif

apps/genpkey.c

@@ -0,0 +1,440 @@
+/* apps/genpkey.c */
+/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
+ * project 2006
+ */
+/* ====================================================================
+ * Copyright (c) 2006 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    licensing@OpenSSL.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+#include <stdio.h>
+#include <string.h>
+#include "apps.h"
+#include <openssl/pem.h>
+#include <openssl/err.h>
+#include <openssl/evp.h>
+#ifndef OPENSSL_NO_ENGINE
+#include <openssl/engine.h>
+#endif
+
+static int init_keygen_file(BIO *err, EVP_PKEY_CTX **pctx,
+				const char *file, ENGINE *e);
+static int genpkey_cb(EVP_PKEY_CTX *ctx);
+
+#define PROG genpkey_main
+
+int MAIN(int, char **);
+
+int MAIN(int argc, char **argv)
+	{
+	ENGINE *e = NULL;
+	char **args, *outfile = NULL;
+	char *passarg = NULL;
+	BIO *in = NULL, *out = NULL;
+	const EVP_CIPHER *cipher = NULL;
+	int outformat;
+	int text = 0;
+	EVP_PKEY *pkey=NULL;
+	EVP_PKEY_CTX *ctx = NULL;
+	char *pass = NULL;
+	int badarg = 0;
+	int ret = 1, rv;
+
+	int do_param = 0;
+
+	if (bio_err == NULL)
+		bio_err = BIO_new_fp (stderr, BIO_NOCLOSE);
+
+	if (!load_config(bio_err, NULL))
+		goto end;
+
+	outformat=FORMAT_PEM;
+
+	ERR_load_crypto_strings();
+	OpenSSL_add_all_algorithms();
+	args = argv + 1;
+	while (!badarg && *args && *args[0] == '-')
+		{
+		if (!strcmp(*args,"-outform"))
+			{
+			if (args[1])
+				{
+				args++;
+				outformat=str2fmt(*args);
+				}
+			else badarg = 1;
+			}
+		else if (!strcmp(*args,"-pass"))
+			{
+			if (!args[1]) goto bad;
+			passarg= *(++args);
+			}
+#ifndef OPENSSL_NO_ENGINE
+		else if (strcmp(*args,"-engine") == 0)
+			{
+			if (!args[1])
+				goto bad;
+        		e = setup_engine(bio_err, *(++args), 0);
+			}
+#endif
+		else if (!strcmp (*args, "-paramfile"))
+			{
+			if (!args[1])
+				goto bad;
+			args++;
+			if (do_param == 1)
+				goto bad;
+			if (!init_keygen_file(bio_err, &ctx, *args, e))
+				goto end;
+			}
+		else if (!strcmp (*args, "-out"))
+			{
+			if (args[1])
+				{
+				args++;
+				outfile = *args;
+				}
+			else badarg = 1;
+			}
+		else if (strcmp(*args,"-algorithm") == 0)
+			{
+			if (!args[1])
+				goto bad;
+			if (!init_gen_str(bio_err, &ctx, *(++args),e, do_param))
+				goto end;
+			}
+		else if (strcmp(*args,"-pkeyopt") == 0)
+			{
+			if (!args[1])
+				goto bad;
+			if (!ctx)
+				{
+				BIO_puts(bio_err, "No keytype specified\n");
+				goto bad;
+				}
+			else if (pkey_ctrl_string(ctx, *(++args)) <= 0)
+				{
+				BIO_puts(bio_err, "parameter setting error\n");
+				ERR_print_errors(bio_err);
+				goto end;
+				}
+			}
+		else if (strcmp(*args,"-genparam") == 0)
+			{
+			if (ctx)
+				goto bad;
+			do_param = 1;
+			}
+		else if (strcmp(*args,"-text") == 0)
+			text=1;
+		else
+			{
+			cipher = EVP_get_cipherbyname(*args + 1);
+			if (!cipher)
+				{
+				BIO_printf(bio_err, "Unknown cipher %s\n",
+								*args + 1);
+				badarg = 1;
+				}
+			if (do_param == 1)
+				badarg = 1;
+			}
+		args++;
+		}
+
+	if (!ctx)
+		badarg = 1;
+
+	if (badarg)
+		{
+		bad:
+		BIO_printf(bio_err, "Usage: genpkey [options]\n");
+		BIO_printf(bio_err, "where options may be\n");
+		BIO_printf(bio_err, "-out file          output file\n");
+		BIO_printf(bio_err, "-outform X         output format (DER or PEM)\n");
+		BIO_printf(bio_err, "-pass arg          output file pass phrase source\n");
+		BIO_printf(bio_err, "-<cipher>          use cipher <cipher> to encrypt the key\n");
+#ifndef OPENSSL_NO_ENGINE
+		BIO_printf(bio_err, "-engine e          use engine e, possibly a hardware device.\n");
+#endif
+		BIO_printf(bio_err, "-paramfile file    parameters file\n");
+		BIO_printf(bio_err, "-algorithm alg     the public key algorithm\n");
+		BIO_printf(bio_err, "-pkeyopt opt:value set the public key algorithm option <opt>\n"
+				            "                   to value <value>\n");
+		BIO_printf(bio_err, "-genparam          generate parameters, not key\n");
+		BIO_printf(bio_err, "-text              print the in text\n");
+		BIO_printf(bio_err, "NB: options order may be important!  See the manual page.\n");
+		goto end;
+		}
+
+	if (!app_passwd(bio_err, passarg, NULL, &pass, NULL))
+		{
+		BIO_puts(bio_err, "Error getting password\n");
+		goto end;
+		}
+
+	if (outfile)
+		{
+		if (!(out = BIO_new_file (outfile, "wb")))
+			{
+			BIO_printf(bio_err,
+				 "Can't open output file %s\n", outfile);
+			goto end;
+			}
+		}
+	else
+		{
+		out = BIO_new_fp (stdout, BIO_NOCLOSE);
+#ifdef OPENSSL_SYS_VMS
+			{
+			BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+			out = BIO_push(tmpbio, out);
+			}
+#endif
+		}
+
+	EVP_PKEY_CTX_set_cb(ctx, genpkey_cb);
+	EVP_PKEY_CTX_set_app_data(ctx, bio_err);
+
+	if (do_param)
+		{
+		if (EVP_PKEY_paramgen(ctx, &pkey) <= 0)
+			{
+			BIO_puts(bio_err, "Error generating parameters\n");
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+		}
+	else
+		{
+		if (EVP_PKEY_keygen(ctx, &pkey) <= 0)
+			{
+			BIO_puts(bio_err, "Error generating key\n");
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+		}
+
+	if (do_param)
+		rv = PEM_write_bio_Parameters(out, pkey);
+	else if (outformat == FORMAT_PEM) 
+		rv = PEM_write_bio_PrivateKey(out, pkey, cipher, NULL, 0,
+								NULL, pass);
+	else if (outformat == FORMAT_ASN1)
+		rv = i2d_PrivateKey_bio(out, pkey);
+	else
+		{
+		BIO_printf(bio_err, "Bad format specified for key\n");
+		goto end;
+		}
+
+	if (rv <= 0)
+		{
+		BIO_puts(bio_err, "Error writing key\n");
+		ERR_print_errors(bio_err);
+		}
+
+	if (text)
+		{
+		if (do_param)
+			rv = EVP_PKEY_print_params(out, pkey, 0, NULL);
+		else
+			rv = EVP_PKEY_print_private(out, pkey, 0, NULL);
+
+		if (rv <= 0)
+			{
+			BIO_puts(bio_err, "Error printing key\n");
+			ERR_print_errors(bio_err);
+			}
+		}
+
+	ret = 0;
+
+	end:
+	if (pkey)
+		EVP_PKEY_free(pkey);
+	if (ctx)
+		EVP_PKEY_CTX_free(ctx);
+	if (out)
+		BIO_free_all(out);
+	BIO_free(in);
+	if (pass)
+		OPENSSL_free(pass);
+
+	return ret;
+	}
+
+static int init_keygen_file(BIO *err, EVP_PKEY_CTX **pctx,
+				const char *file, ENGINE *e)
+	{
+	BIO *pbio;
+	EVP_PKEY *pkey = NULL;
+	EVP_PKEY_CTX *ctx = NULL;
+	if (*pctx)
+		{
+		BIO_puts(err, "Parameters already set!\n");
+		return 0;
+		}
+
+	pbio = BIO_new_file(file, "r");
+	if (!pbio)
+		{
+		BIO_printf(err, "Can't open parameter file %s\n", file);
+		return 0;
+		}
+
+	pkey = PEM_read_bio_Parameters(pbio, NULL);
+	BIO_free(pbio);
+
+	if (!pkey)
+		{
+		BIO_printf(bio_err, "Error reading parameter file %s\n", file);
+		return 0;
+		}
+
+	ctx = EVP_PKEY_CTX_new(pkey, e);
+	if (!ctx)
+		goto err;
+	if (EVP_PKEY_keygen_init(ctx) <= 0)
+		goto err;
+	EVP_PKEY_free(pkey);
+	*pctx = ctx;
+	return 1;
+
+	err:
+	BIO_puts(err, "Error initializing context\n");
+	ERR_print_errors(err);
+	if (ctx)
+		EVP_PKEY_CTX_free(ctx);
+	if (pkey)
+		EVP_PKEY_free(pkey);
+	return 0;
+
+	}
+
+int init_gen_str(BIO *err, EVP_PKEY_CTX **pctx,
+			const char *algname, ENGINE *e, int do_param)
+	{
+	EVP_PKEY_CTX *ctx = NULL;
+	const EVP_PKEY_ASN1_METHOD *ameth;
+	ENGINE *tmpeng = NULL;
+	int pkey_id;
+
+	if (*pctx)
+		{
+		BIO_puts(err, "Algorithm already set!\n");
+		return 0;
+		}
+
+	ameth = EVP_PKEY_asn1_find_str(&tmpeng, algname, -1);
+
+#ifndef OPENSSL_NO_ENGINE
+	if (!ameth && e)
+		ameth = ENGINE_get_pkey_asn1_meth_str(e, algname, -1);
+#endif
+
+	if (!ameth)
+		{
+		BIO_printf(bio_err, "Algorithm %s not found\n", algname);
+		return 0;
+		}
+
+	ERR_clear_error();
+
+	EVP_PKEY_asn1_get0_info(&pkey_id, NULL, NULL, NULL, NULL, ameth);
+#ifndef OPENSSL_NO_ENGINE
+	if (tmpeng)
+		ENGINE_finish(tmpeng);
+#endif
+	ctx = EVP_PKEY_CTX_new_id(pkey_id, e);
+
+	if (!ctx)
+		goto err;
+	if (do_param)
+		{
+		if (EVP_PKEY_paramgen_init(ctx) <= 0)
+			goto err;
+		}
+	else
+		{
+		if (EVP_PKEY_keygen_init(ctx) <= 0)
+			goto err;
+		}
+
+	*pctx = ctx;
+	return 1;
+
+	err:
+	BIO_printf(err, "Error initializing %s context\n", algname);
+	ERR_print_errors(err);
+	if (ctx)
+		EVP_PKEY_CTX_free(ctx);
+	return 0;
+
+	}
+
+static int genpkey_cb(EVP_PKEY_CTX *ctx)
+	{
+	char c='*';
+	BIO *b = EVP_PKEY_CTX_get_app_data(ctx);
+	int p;
+	p = EVP_PKEY_CTX_get_keygen_info(ctx, 0);
+	if (p == 0) c='.';
+	if (p == 1) c='+';
+	if (p == 2) c='*';
+	if (p == 3) c='\n';
+	BIO_write(b,&c,1);
+	(void)BIO_flush(b);
+#ifdef LINT
+	p=n;
+#endif
+	return 1;
+	}

apps/genrsa.c

@@ -105,9 +105,9 @@ int MAIN(int argc, char **argv)
 	char *inrand=NULL;
 	BIO *out=NULL;
 	BIGNUM *bn = BN_new();
-	RSA *rsa = RSA_new();
+	RSA *rsa = NULL;
 
-	if(!bn || !rsa) goto err;
+	if(!bn) goto err;
 
 	apps_startup();
 	BN_GENCB_set(&cb, genrsa_cb, bio_err);
@@ -266,6 +266,10 @@ bad:
 	BIO_printf(bio_err,"Generating RSA private key, %d bit long modulus\n",
 		num);
 
+	rsa = RSA_new();
+	if (!rsa)
+		goto err;
+
 	if(!BN_set_word(bn, f4) || !RSA_generate_key_ex(rsa, num, bn, &cb))
 		goto err;
 		

apps/install.com

@@ -5,13 +5,23 @@ $! Time of creation: 22-MAY-1998 10:13
 $!
 $! P1	root of the directory tree
 $!
+$
 $	IF P1 .EQS. ""
 $	THEN
 $	    WRITE SYS$OUTPUT "First argument missing."
-$	    WRITE SYS$OUTPUT "Should be the directory where you want things installed."
+$	    WRITE SYS$OUTPUT -
+		  "Should be the directory where you want things installed."
 $	    EXIT
 $	ENDIF
 $
+$	IF (F$GETSYI("CPU").LT.128)
+$	THEN
+$	    ARCH := VAX
+$	ELSE
+$	    ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE")
+$	    IF (ARCH .EQS. "") THEN ARCH = "UNK"
+$	ENDIF
+$
 $	ROOT = F$PARSE(P1,"[]A.;0",,,"SYNTAX_ONLY,NO_CONCEAL") - "A.;0"
 $	ROOT_DEV = F$PARSE(ROOT,,,"DEVICE","SYNTAX_ONLY")
 $	ROOT_DIR = F$PARSE(ROOT,,,"DIRECTORY","SYNTAX_ONLY") -
@@ -19,23 +29,16 @@ $	ROOT_DIR = F$PARSE(ROOT,,,"DIRECTORY","SYNTAX_ONLY") -
 $	ROOT = ROOT_DEV + "[" + ROOT_DIR
 $
 $	DEFINE/NOLOG WRK_SSLROOT 'ROOT'.] /TRANS=CONC
-$	DEFINE/NOLOG WRK_SSLVEXE WRK_SSLROOT:[VAX_EXE]
-$	DEFINE/NOLOG WRK_SSLAEXE WRK_SSLROOT:[ALPHA_EXE]
-$	DEFINE/NOLOG WRK_SSLLIB WRK_SSLROOT:[LIB]
+$	DEFINE/NOLOG WRK_SSLEXE WRK_SSLROOT:['ARCH'_EXE]
 $
 $	IF F$PARSE("WRK_SSLROOT:[000000]") .EQS. "" THEN -
 	   CREATE/DIR/LOG WRK_SSLROOT:[000000]
-$	IF F$PARSE("WRK_SSLVEXE:") .EQS. "" THEN -
-	   CREATE/DIR/LOG WRK_SSLVEXE:
-$	IF F$PARSE("WRK_SSLAEXE:") .EQS. "" THEN -
-	   CREATE/DIR/LOG WRK_SSLAEXE:
-$	IF F$PARSE("WRK_SSLLIB:") .EQS. "" THEN -
-	   CREATE/DIR/LOG WRK_SSLLIB:
+$	IF F$PARSE("WRK_SSLEXE:") .EQS. "" THEN -
+	   CREATE/DIR/LOG WRK_SSLEXE:
 $
 $	EXE := openssl
 $
-$	VEXE_DIR := [-.VAX.EXE.APPS]
-$	AEXE_DIR := [-.AXP.EXE.APPS]
+$	EXE_DIR := [-.'ARCH'.EXE.APPS]
 $
 $	I = 0
 $ LOOP_EXE: 
@@ -43,24 +46,17 @@ $	E = F$EDIT(F$ELEMENT(I, ",", EXE),"TRIM")
 $	I = I + 1
 $	IF E .EQS. "," THEN GOTO LOOP_EXE_END
 $	SET NOON
-$	IF F$SEARCH(VEXE_DIR+E+".EXE") .NES. ""
+$	IF F$SEARCH(EXE_DIR+E+".EXE") .NES. ""
 $	THEN
-$	  COPY 'VEXE_DIR''E'.EXE WRK_SSLVEXE:'E'.EXE/log
-$	  SET FILE/PROT=W:RE WRK_SSLVEXE:'E'.EXE
-$	ENDIF
-$	IF F$SEARCH(AEXE_DIR+E+".EXE") .NES. ""
-$	THEN
-$	  COPY 'AEXE_DIR''E'.EXE WRK_SSLAEXE:'E'.EXE/log
-$	  SET FILE/PROT=W:RE WRK_SSLAEXE:'E'.EXE
+$	  COPY 'EXE_DIR''E'.EXE WRK_SSLEXE:'E'.EXE/log
+$	  SET FILE/PROT=W:RE WRK_SSLEXE:'E'.EXE
 $	ENDIF
 $	SET ON
 $	GOTO LOOP_EXE
 $ LOOP_EXE_END:
 $
 $	SET NOON
-$	COPY CA.COM WRK_SSLAEXE:CA.COM/LOG
-$	SET FILE/PROT=W:RE WRK_SSLAEXE:CA.COM
-$	COPY CA.COM WRK_SSLVEXE:CA.COM/LOG
+$	COPY CA.COM WRK_SSLEXE:CA.COM/LOG
 $	SET FILE/PROT=W:RE WRK_SSLVEXE:CA.COM
 $	COPY OPENSSL-VMS.CNF WRK_SSLROOT:[000000]OPENSSL.CNF/LOG
 $	SET FILE/PROT=W:R WRK_SSLROOT:[000000]OPENSSL.CNF

apps/makeapps.com

@@ -6,11 +6,12 @@ $!               A-Com Computing, Inc.
 $!               byer@mail.all-net.net
 $!
 $!  Changes by Richard Levitte <richard@levitte.org>
+$!             Zoltan Arpadffy <zoli@polarhome.com>   
 $!
 $!  This command files compiles and creates all the various different
 $!  "application" programs for the different types of encryption for OpenSSL.
 $!  The EXE's are placed in the directory [.xxx.EXE.APPS] where "xxx" denotes
-$!  either AXP or VAX depending on your machine architecture.
+$!  ALPHA, IA64 or VAX, depending on your machine architecture.
 $!
 $!  It was written so it would try to determine what "C" compiler to
 $!  use or you can specify which "C" compiler to use.
@@ -46,20 +47,21 @@ $ TCPIP_LIB = ""
 $!
 $! Check What Architecture We Are Using.
 $!
-$ IF (F$GETSYI("CPU").GE.128)
+$ IF (F$GETSYI("CPU").LT.128)
 $ THEN
 $!
-$!  The Architecture Is AXP.
+$!  The Architecture Is VAX.
 $!
-$   ARCH := AXP
+$   ARCH := VAX
 $!
 $! Else...
 $!
 $ ELSE
 $!
-$!  The Architecture Is VAX.
+$!  The Architecture Is Alpha, IA64 or whatever comes in the future.
 $!
-$   ARCH := VAX
+$   ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE")
+$   IF (ARCH .EQS. "") THEN ARCH = "UNK"
 $!
 $! End The Architecture Check.
 $!
@@ -68,22 +70,6 @@ $!
 $! Define what programs should be compiled
 $!
 $ PROGRAMS := OPENSSL
-$!$ PROGRAMS := VERIFY,ASN1PARS,REQ,DGST,DH,ENC,PASSWD,GENDH,ERRSTR,CA,CRL,-
-$!	      RSA,DSA,DSAPARAM,-
-$!	      X509,GENRSA,GENDSA,S_SERVER,S_CLIENT,SPEED,-
-$!	      S_TIME,VERSION,PKCS7,CRL2P7,SESS_ID,CIPHERS,NSEQ,
-$!
-$! Check To Make Sure We Have Valid Command Line Parameters.
-$!
-$ GOSUB CHECK_OPTIONS
-$!
-$! Initialise logical names and such
-$!
-$ GOSUB INITIALISE
-$!
-$! Tell The User What Kind of Machine We Run On.
-$!
-$ WRITE SYS$OUTPUT "Compiling On A ",ARCH," Machine."
 $!
 $! Define The CRYPTO Library.
 $!
@@ -97,6 +83,22 @@ $! Define The OBJ Directory.
 $!
 $ OBJ_DIR := SYS$DISK:[-.'ARCH'.OBJ.APPS]
 $!
+$! Define The EXE Directory.
+$!
+$ EXE_DIR := SYS$DISK:[-.'ARCH'.EXE.APPS]
+$!
+$! Check To Make Sure We Have Valid Command Line Parameters.
+$!
+$ GOSUB CHECK_OPTIONS
+$!
+$! Initialise logical names and such
+$!
+$ GOSUB INITIALISE
+$!
+$! Tell The User What Kind of Machine We Run On.
+$!
+$ WRITE SYS$OUTPUT "Compiling On A ",ARCH," Machine."
+$!
 $! Check To See If The OBJ Directory Exists.
 $!
 $ IF (F$PARSE(OBJ_DIR).EQS."")
@@ -110,10 +112,6 @@ $! End The OBJ Directory Check.
 $!
 $ ENDIF
 $!
-$! Define The EXE Directory.
-$!
-$ EXE_DIR := SYS$DISK:[-.'ARCH'.EXE.APPS]
-$!
 $! Check To See If The EXE Directory Exists.
 $!
 $ IF (F$PARSE(EXE_DIR).EQS."")
@@ -136,140 +134,172 @@ $!
 $ GOSUB CHECK_OPT_FILE
 $!
 $! Define The Application Files.
+$! NOTE: Some might think this list ugly.  However, it's made this way to
+$! reflect the E_OBJ variable in Makefile as closely as possible, thereby
+$! making it fairly easy to verify that the lists are the same.
 $!
-$ LIB_FILES = "VERIFY;ASN1PARS;REQ;DGST;DH;DHPARAM;ENC;PASSWD;GENDH;ERRSTR;"+-
-	      "CA;PKCS7;CRL2P7;CRL;"+-
-	      "RSA;RSAUTL;DSA;DSAPARAM;EC;ECPARAM;"+-
-	      "X509;GENRSA;GENDSA;S_SERVER;S_CLIENT;SPEED;"+-
-	      "S_TIME;APPS;S_CB;S_SOCKET;APP_RAND;VERSION;SESS_ID;"+-
-	      "CIPHERS;NSEQ;PKCS12;PKCS8;SPKAC;SMIME;RAND;ENGINE;OCSP;PRIME"
+$ LIB_OPENSSL = "VERIFY,ASN1PARS,REQ,DGST,DH,DHPARAM,ENC,PASSWD,GENDH,ERRSTR,"+-
+	     	"CA,PKCS7,CRL2P7,CRL,"+-
+	      	"RSA,RSAUTL,DSA,DSAPARAM,EC,ECPARAM,"+-
+	      	"X509,GENRSA,GENDSA,GENPKEY,S_SERVER,S_CLIENT,SPEED,"+-
+	      	"S_TIME,APPS,S_CB,S_SOCKET,APP_RAND,VERSION,SESS_ID,"+-
+	      	"CIPHERS,NSEQ,PKCS12,PKCS8,PKEY,PKEYPARAM,PKEYUTL,"+ -
+	      	"SPKAC,SMIME,CMS,RAND,ENGINE,OCSP,PRIME,TS"
 $ TCPIP_PROGRAMS = ",,"
 $ IF COMPILER .EQS. "VAXC" THEN -
      TCPIP_PROGRAMS = ",OPENSSL,"
 $!
 $! Setup exceptional compilations
 $!
-$ COMPILEWITH_CC2 = ",S_SERVER,S_CLIENT,"
+$ COMPILEWITH_CC2 = ",S_SOCKET,S_SERVER,S_CLIENT,"
 $!
 $ PHASE := LIB
 $!
 $ RESTART: 
 $!
-$!  Define A File Counter And Set It To "0".
+$!  Define An App Counter And Set It To "0".
 $!
-$ FILE_COUNTER = 0
+$ APP_COUNTER = 0
 $!
-$! Top Of The File Loop.
+$!  Top Of The App Loop.
 $!
-$ NEXT_FILE:
+$ NEXT_APP:
 $!
-$! O.K, Extract The File Name From The File List.
+$!  Make The Application File Name
 $!
-$ FILE_NAME0 = F$EDIT(F$ELEMENT(FILE_COUNTER,";",'PHASE'_FILES),"TRIM")
-$ FILE_NAME = F$EDIT(F$ELEMENT(0,",",FILE_NAME0),"TRIM")
-$ EXTRA_OBJ = FILE_NAME0 - FILE_NAME
+$ CURRENT_APP = F$EDIT(F$ELEMENT(APP_COUNTER,",",PROGRAMS),"TRIM")
 $!
-$! Check To See If We Are At The End Of The File List.
+$!  Create The Executable File Name.
 $!
-$ IF (FILE_NAME0.EQS.";")
+$   EXE_FILE = EXE_DIR + CURRENT_APP + ".EXE"
+$!
+$!  Check To See If We Are At The End Of The File List.
+$!
+$ IF (CURRENT_APP.EQS.",")
 $ THEN
 $   IF (PHASE.EQS."LIB")
 $   THEN
 $     PHASE := APP
 $     GOTO RESTART
 $   ELSE
-$     GOTO FILE_DONE
+$     GOTO APP_DONE
 $   ENDIF
 $ ENDIF
 $!
-$! Increment The Counter.
+$!  Increment The Counter.
 $!
-$ FILE_COUNTER = FILE_COUNTER + 1
+$ APP_COUNTER = APP_COUNTER + 1
 $!
-$! Check to see if this program should actually be compiled
-$!
-$ IF PHASE .EQS. "APP" .AND. -
-     ","+PROGRAMS+"," - (","+F$EDIT(FILE_NAME,"UPCASE")+",") .EQS. ","+PROGRAMS+","
-$ THEN
-$   GOTO NEXT_FILE
-$ ENDIF
-$!
-$! Create The Source File Name.
-$!
-$ SOURCE_FILE = "SYS$DISK:[]" + FILE_NAME + ".C"
-$!
-$! Create The Object File Name.
-$!
-$ OBJECT_FILE = OBJ_DIR + FILE_NAME + ".OBJ"
-$!
-$! Create The Executable File Name.
-$!
-$ EXE_FILE = EXE_DIR + FILE_NAME + ".EXE"
-$ ON WARNING THEN GOTO NEXT_FILE
-$!
-$! Check To See If The File We Want To Compile Actually Exists.
-$!
-$ IF (F$SEARCH(SOURCE_FILE).EQS."")
-$ THEN
-$!
-$!  Tell The User That The File Dosen't Exist.
-$!
-$   WRITE SYS$OUTPUT ""
-$   WRITE SYS$OUTPUT "The File ",SOURCE_FILE," Dosen't Exist."
-$   WRITE SYS$OUTPUT ""
-$!
-$!  Exit The Build.
-$!
-$   GOTO EXIT
-$!
-$! End The File Exist Check.
-$!
-$ ENDIF
-$!
-$! Tell The User What We Are Building.
+$!  Decide if we're building the object files or not.
 $!
 $ IF (PHASE.EQS."LIB")
 $ THEN
-$   WRITE SYS$OUTPUT "Compiling The ",FILE_NAME,".C File."
-$ ELSE
-$   WRITE SYS$OUTPUT "Building The ",FILE_NAME," Application Program."
-$ ENDIF
 $!
-$! Compile The File.
+$!  Define A Library File Counter And Set It To "-1".
+$!  -1 Means The Application File Name Is To Be Used.
 $!
-$ ON ERROR THEN GOTO NEXT_FILE
-$ IF COMPILEWITH_CC2 - FILE_NAME .NES. COMPILEWITH_CC2
-$ THEN
-$   CC2/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
-$ ELSE
-$   CC/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
-$ ENDIF
+$   LIB_COUNTER = -1
 $!
-$ ON WARNING THEN GOTO NEXT_FILE
+$!  Create a .OPT file for the object files
 $!
-$ IF (PHASE.EQS."LIB") 
-$ THEN 
-$   GOTO NEXT_FILE
+$   OPEN/WRITE OBJECTS 'EXE_DIR''CURRENT_APP'.OPT
+$!
+$!  Top Of The File Loop.
+$!
+$  NEXT_LIB:
+$!
+$!  O.K, Extract The File Name From The File List.
+$!
+$   IF LIB_COUNTER .GE. 0
+$   THEN
+$     FILE_NAME = F$EDIT(F$ELEMENT(LIB_COUNTER,",",LIB_'CURRENT_APP'),"TRIM")
+$   ELSE
+$     FILE_NAME = CURRENT_APP
+$   ENDIF
+$!
+$!  Check To See If We Are At The End Of The File List.
+$!
+$   IF (FILE_NAME.EQS.",")
+$   THEN
+$     CLOSE OBJECTS
+$     GOTO NEXT_APP
+$   ENDIF
+$!
+$!  Increment The Counter.
+$!
+$   LIB_COUNTER = LIB_COUNTER + 1
+$!
+$!  Create The Source File Name.
+$!
+$   SOURCE_FILE = "SYS$DISK:[]" + FILE_NAME + ".C"
+$!
+$!  Create The Object File Name.
+$!
+$   OBJECT_FILE = OBJ_DIR + FILE_NAME + ".OBJ"
+$   ON WARNING THEN GOTO NEXT_LIB
+$!
+$!  Check To See If The File We Want To Compile Actually Exists.
+$!
+$   IF (F$SEARCH(SOURCE_FILE).EQS."")
+$   THEN
+$!
+$!    Tell The User That The File Dosen't Exist.
+$!
+$     WRITE SYS$OUTPUT ""
+$     WRITE SYS$OUTPUT "The File ",SOURCE_FILE," Dosen't Exist."
+$     WRITE SYS$OUTPUT ""
+$!
+$!    Exit The Build.
+$!
+$     GOTO EXIT
+$!
+$!  End The File Exist Check.
+$!
+$   ENDIF
+$!
+$!  Tell The User What We Are Building.
+$!
+$   IF (PHASE.EQS."LIB")
+$   THEN
+$     WRITE SYS$OUTPUT "Compiling The ",FILE_NAME,".C File."
+$   ELSE
+$     WRITE SYS$OUTPUT "Building The ",FILE_NAME," Application Program."
+$   ENDIF
+$!
+$!  Compile The File.
+$!
+$   ON ERROR THEN GOTO NEXT_LIB
+$   IF COMPILEWITH_CC2 - FILE_NAME .NES. COMPILEWITH_CC2
+$   THEN
+$     CC2/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
+$   ELSE
+$     CC/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
+$   ENDIF
+$   WRITE OBJECTS OBJECT_FILE
+$!
+$   GOTO NEXT_LIB
 $ ENDIF
 $!
 $!  Check if this program works well without a TCPIP library
 $!
-$ IF TCPIP_LIB .EQS. "" .AND. TCPIP_PROGRAMS - FILE_NAME .NES. TCPIP_PROGRAMS
+$ IF TCPIP_LIB .EQS. "" .AND. TCPIP_PROGRAMS - CURRENT_APP .NES. TCPIP_PROGRAMS
 $ THEN
-$   WRITE SYS$OUTPUT FILE_NAME," needs a TCP/IP library.  Can't link.  Skipping..."
-$   GOTO NEXT_FILE
+$   WRITE SYS$OUTPUT CURRENT_APP," needs a TCP/IP library.  Can't link.  Skipping..."
+$   GOTO NEXT_APP
 $ ENDIF
 $!
 $! Link The Program.
 $! Check To See If We Are To Link With A Specific TCP/IP Library.
 $!
+$ ON WARNING THEN GOTO NEXT_APP
+$!
 $ IF (TCPIP_LIB.NES."")
 $ THEN
 $!
 $! Don't Link With The RSAREF Routines And TCP/IP Library.
 $!
 $   LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
-	'OBJECT_FILE''EXTRA_OBJ', -
+	'EXE_DIR''CURRENT_APP'.OPT/OPTION, -
         'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, -
         'TCPIP_LIB','OPT_FILE'/OPTION
 $!
@@ -280,7 +310,7 @@ $!
 $! Don't Link With The RSAREF Routines And Link With A TCP/IP Library.
 $!
 $   LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
-	'OBJECT_FILE''EXTRA_OBJ', -
+	'EXE_DIR''CURRENT_APP'.OPT/OPTION, -
         'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, -
         'OPT_FILE'/OPTION
 $!
@@ -290,11 +320,11 @@ $ ENDIF
 $!
 $! Go Back And Do It Again.
 $!
-$ GOTO NEXT_FILE
+$ GOTO NEXT_APP
 $!
 $! All Done With This File.
 $!
-$ FILE_DONE:
+$ APP_DONE:
 $ EXIT:
 $!
 $! All Done, Time To Clean Up And Exit.
@@ -395,19 +425,19 @@ $!    Else...
 $!
 $     ELSE
 $!
-$!      Create The AXP Linker Option File.
+$!      Create The non-VAX Linker Option File.
 $!
 $       CREATE 'OPT_FILE'
 $DECK
 !
-! Default System Options File For AXP To Link Agianst 
+! Default System Options File For non-VAX To Link Agianst 
 ! The Sharable C Runtime Library.
 !
 SYS$SHARE:CMA$OPEN_LIB_SHR/SHARE
 SYS$SHARE:CMA$OPEN_RTL/SHARE
 $EOD
 $!
-$!    End The VAX/AXP DEC C Option File Check.
+$!    End The DEC C Option File Check.
 $!
 $     ENDIF
 $!
@@ -556,7 +586,7 @@ $   ELSE
 $!
 $!  Check To See If We Have VAXC Or DECC.
 $!
-$     IF (ARCH.EQS."AXP").OR.(F$TRNLNM("DECC$CC_DEFAULT").NES."")
+$     IF (ARCH.NES."VAX").OR.(F$TRNLNM("DECC$CC_DEFAULT").NES."")
 $     THEN 
 $!
 $!      Looks Like DECC, Set To Use DECC.
@@ -666,7 +696,7 @@ $     CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/STANDARD=ANSI89" + -
 $!
 $!    Define The Linker Options File Name.
 $!
-$     OPT_FILE = "SYS$DISK:[]VAX_DECC_OPTIONS.OPT"
+$     OPT_FILE = "''EXE_DIR'VAX_DECC_OPTIONS.OPT"
 $!
 $!  End DECC Check.
 $!
@@ -687,9 +717,9 @@ $!
 $!    Compile Using VAXC.
 $!
 $     CC = "CC"
-$     IF ARCH.EQS."AXP"
+$     IF ARCH.NES."VAX"
 $     THEN
-$	WRITE SYS$OUTPUT "There is no VAX C on Alpha!"
+$	WRITE SYS$OUTPUT "There is no VAX C on ''ARCH'!"
 $	EXIT
 $     ENDIF
 $     IF F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC" THEN CC = "CC/VAXC"
@@ -703,7 +733,7 @@ $     DEFINE/NOLOG SYS SYS$COMMON:[SYSLIB]
 $!
 $!    Define The Linker Options File Name.
 $!
-$     OPT_FILE = "SYS$DISK:[]VAX_VAXC_OPTIONS.OPT"
+$     OPT_FILE = "''EXE_DIR'VAX_VAXC_OPTIONS.OPT"
 $!
 $!  End VAXC Check
 $!
@@ -730,7 +760,7 @@ $     CC = GCC+"/NOCASE_HACK/''GCC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
 $!
 $!    Define The Linker Options File Name.
 $!
-$     OPT_FILE = "SYS$DISK:[]VAX_GNUC_OPTIONS.OPT"
+$     OPT_FILE = "''EXE_DIR'VAX_GNUC_OPTIONS.OPT"
 $!
 $!  End The GNU C Check.
 $!

apps/nseq.c

@@ -1,5 +1,5 @@
 /* nseq.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
+/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
  * project 1999.
  */
 /* ====================================================================

apps/ocsp.c

@@ -1,5 +1,5 @@
 /* ocsp.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
+/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
  * project 2000.
  */
 /* ====================================================================
@@ -57,25 +57,52 @@
  */
 #ifndef OPENSSL_NO_OCSP
 
+#ifdef OPENSSL_SYS_VMS
+#define _XOPEN_SOURCE_EXTENDED	/* So fd_set and friends get properly defined
+				   on OpenVMS */
+#endif
+
+#define USE_SOCKETS
+
 #include <stdio.h>
+#include <stdlib.h>
 #include <string.h>
-#include "apps.h"
-#include <openssl/pem.h>
-#include <openssl/ocsp.h>
+#include <time.h>
+#include "apps.h" /* needs to be included before the openssl headers! */
+#include <openssl/e_os2.h>
+#include <openssl/crypto.h>
 #include <openssl/err.h>
 #include <openssl/ssl.h>
+#include <openssl/evp.h>
 #include <openssl/bn.h>
+#include <openssl/x509v3.h>
 
+#if defined(NETWARE_CLIB)
+#  ifdef NETWARE_BSDSOCK
+#    include <sys/socket.h>
+#    include <sys/bsdskt.h>
+#  else
+#    include <novsock2.h>
+#  endif
+#elif defined(NETWARE_LIBC)
+#  ifdef NETWARE_BSDSOCK
+#    include <sys/select.h>
+#  else
+#    include <novsock2.h>
+#  endif
+#endif
+  
 /* Maximum leeway in validity period: default 5 minutes */
 #define MAX_VALIDITY_PERIOD	(5 * 60)
 
-static int add_ocsp_cert(OCSP_REQUEST **req, X509 *cert, X509 *issuer,
+static int add_ocsp_cert(OCSP_REQUEST **req, X509 *cert, const EVP_MD *cert_id_md, X509 *issuer,
 				STACK_OF(OCSP_CERTID) *ids);
-static int add_ocsp_serial(OCSP_REQUEST **req, char *serial, X509 *issuer,
+static int add_ocsp_serial(OCSP_REQUEST **req, char *serial, const EVP_MD * cert_id_md, X509 *issuer,
 				STACK_OF(OCSP_CERTID) *ids);
 static int print_ocsp_summary(BIO *out, OCSP_BASICRESP *bs, OCSP_REQUEST *req,
-				STACK *names, STACK_OF(OCSP_CERTID) *ids,
-				long nsec, long maxage);
+			      STACK_OF(OPENSSL_STRING) *names,
+			      STACK_OF(OCSP_CERTID) *ids, long nsec,
+			      long maxage);
 
 static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, CA_DB *db,
 			X509 *ca, X509 *rcert, EVP_PKEY *rkey,
@@ -86,6 +113,9 @@ static char **lookup_serial(CA_DB *db, ASN1_INTEGER *ser);
 static BIO *init_responder(char *port);
 static int do_responder(OCSP_REQUEST **preq, BIO **pcbio, BIO *acbio, char *port);
 static int send_ocsp_response(BIO *cbio, OCSP_RESPONSE *resp);
+static OCSP_RESPONSE *query_responder(BIO *err, BIO *cbio, char *path,
+				STACK_OF(CONF_VALUE) *headers,
+				OCSP_REQUEST *req, int req_timeout);
 
 #undef PROG
 #define PROG ocsp_main
@@ -103,6 +133,7 @@ int MAIN(int argc, char **argv)
 	char *rsignfile = NULL, *rkeyfile = NULL;
 	char *outfile = NULL;
 	int add_nonce = 1, noverify = 0, use_ssl = -1;
+	STACK_OF(CONF_VALUE) *headers = NULL;
 	OCSP_REQUEST *req = NULL;
 	OCSP_RESPONSE *resp = NULL;
 	OCSP_BASICRESP *bs = NULL;
@@ -112,11 +143,11 @@ int MAIN(int argc, char **argv)
 	BIO *acbio = NULL, *cbio = NULL;
 	BIO *derbio = NULL;
 	BIO *out = NULL;
+	int req_timeout = -1;
 	int req_text = 0, resp_text = 0;
 	long nsec = MAX_VALIDITY_PERIOD, maxage = -1;
 	char *CAfile = NULL, *CApath = NULL;
 	X509_STORE *store = NULL;
-	SSL_CTX *ctx = NULL;
 	STACK_OF(X509) *sign_other = NULL, *verify_other = NULL, *rother = NULL;
 	char *sign_certfile = NULL, *verify_certfile = NULL, *rcertfile = NULL;
 	unsigned long sign_flags = 0, verify_flags = 0, rflags = 0;
@@ -125,7 +156,7 @@ int MAIN(int argc, char **argv)
 	int badarg = 0;
 	int i;
 	int ignore_err = 0;
-	STACK *reqnames = NULL;
+	STACK_OF(OPENSSL_STRING) *reqnames = NULL;
 	STACK_OF(OCSP_CERTID) *ids = NULL;
 
 	X509 *rca_cert = NULL;
@@ -133,6 +164,7 @@ int MAIN(int argc, char **argv)
 	char *rca_filename = NULL;
 	CA_DB *rdb = NULL;
 	int nmin = 0, ndays = -1;
+	const EVP_MD *cert_id_md = NULL;
 
 	if (bio_err == NULL) bio_err = BIO_new_fp(stderr, BIO_NOCLOSE);
 
@@ -141,7 +173,7 @@ int MAIN(int argc, char **argv)
 	SSL_load_error_strings();
 	OpenSSL_add_ssl_algorithms();
 	args = argv + 1;
-	reqnames = sk_new_null();
+	reqnames = sk_OPENSSL_STRING_new_null();
 	ids = sk_OCSP_CERTID_new_null();
 	while (!badarg && *args && *args[0] == '-')
 		{
@@ -154,6 +186,22 @@ int MAIN(int argc, char **argv)
 				}
 			else badarg = 1;
 			}
+		else if (!strcmp(*args, "-timeout"))
+			{
+			if (args[1])
+				{
+				args++;
+				req_timeout = atol(*args);
+				if (req_timeout < 0)
+					{
+					BIO_printf(bio_err,
+						"Illegal timeout value %s\n",
+						*args);
+					badarg = 1;
+					}
+				}
+			else badarg = 1;
+			}
 		else if (!strcmp(*args, "-url"))
 			{
 			if (args[1])
@@ -185,6 +233,16 @@ int MAIN(int argc, char **argv)
 				}
 			else badarg = 1;
 			}
+		else if (!strcmp(*args, "-header"))
+			{
+			if (args[1] && args[2])
+				{
+				if (!X509V3_add_value(args[1], args[2], &headers))
+					goto end;
+				args += 2;
+				}
+			else badarg = 1;
+			}
 		else if (!strcmp(*args, "-ignore_err"))
 			ignore_err = 1;
 		else if (!strcmp(*args, "-noverify"))
@@ -384,9 +442,10 @@ int MAIN(int argc, char **argv)
 				cert = load_cert(bio_err, *args, FORMAT_PEM,
 					NULL, e, "certificate");
 				if(!cert) goto end;
-				if(!add_ocsp_cert(&req, cert, issuer, ids))
+				if (!cert_id_md) cert_id_md = EVP_sha1();
+				if(!add_ocsp_cert(&req, cert, cert_id_md, issuer, ids))
 					goto end;
-				if(!sk_push(reqnames, *args))
+				if(!sk_OPENSSL_STRING_push(reqnames, *args))
 					goto end;
 				}
 			else badarg = 1;
@@ -396,9 +455,10 @@ int MAIN(int argc, char **argv)
 			if (args[1])
 				{
 				args++;
-				if(!add_ocsp_serial(&req, *args, issuer, ids))
+				if (!cert_id_md) cert_id_md = EVP_sha1();
+				if(!add_ocsp_serial(&req, *args, cert_id_md, issuer, ids))
 					goto end;
-				if(!sk_push(reqnames, *args))
+				if(!sk_OPENSSL_STRING_push(reqnames, *args))
 					goto end;
 				}
 			else badarg = 1;
@@ -498,7 +558,10 @@ int MAIN(int argc, char **argv)
 				}
 			else badarg = 1;
 			}
-		else badarg = 1;
+		else if ((cert_id_md = EVP_get_digestbyname((*args)+1))==NULL)
+			{
+			badarg = 1;
+			}
 		args++;
 		}
 
@@ -554,6 +617,7 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-ndays n	 	 number of days before next update\n");
 		BIO_printf (bio_err, "-resp_key_id       identify reponse by signing certificate key ID\n");
 		BIO_printf (bio_err, "-nrequest n        number of requests to accept (default unlimited)\n");
+		BIO_printf (bio_err, "-<dgst alg>     use specified digest in the request");
 		goto end;
 		}
 
@@ -660,7 +724,8 @@ int MAIN(int argc, char **argv)
 			"signer private key");
 		if (!key)
 			goto end;
-		if (!OCSP_request_sign(req, signer, key, EVP_sha1(), sign_other, sign_flags))
+
+		if (!OCSP_request_sign(req, signer, key, NULL, sign_other, sign_flags))
 			{
 			BIO_printf(bio_err, "Error signing OCSP request\n");
 			goto end;
@@ -703,52 +768,14 @@ int MAIN(int argc, char **argv)
 	else if (host)
 		{
 #ifndef OPENSSL_NO_SOCK
-		cbio = BIO_new_connect(host);
+		resp = process_responder(bio_err, req, host, path,
+					port, use_ssl, headers, req_timeout);
+		if (!resp)
+			goto end;
 #else
 		BIO_printf(bio_err, "Error creating connect BIO - sockets not supported.\n");
 		goto end;
 #endif
-		if (!cbio)
-			{
-			BIO_printf(bio_err, "Error creating connect BIO\n");
-			goto end;
-			}
-		if (port) BIO_set_conn_port(cbio, port);
-		if (use_ssl == 1)
-			{
-			BIO *sbio;
-#if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
-			ctx = SSL_CTX_new(SSLv23_client_method());
-#elif !defined(OPENSSL_NO_SSL3)
-			ctx = SSL_CTX_new(SSLv3_client_method());
-#elif !defined(OPENSSL_NO_SSL2)
-			ctx = SSL_CTX_new(SSLv2_client_method());
-#else
-			BIO_printf(bio_err, "SSL is disabled\n");
-			goto end;
-#endif
-			if (ctx == NULL)
-				{
-				BIO_printf(bio_err, "Error creating SSL context.\n");
-				goto end;
-				}
-			SSL_CTX_set_mode(ctx, SSL_MODE_AUTO_RETRY);
-			sbio = BIO_new_ssl(ctx, 1);
-			cbio = BIO_push(sbio, cbio);
-			}
-		if (BIO_do_connect(cbio) <= 0)
-			{
-			BIO_printf(bio_err, "Error connecting BIO\n");
-			goto end;
-			}
-		resp = OCSP_sendreq_bio(cbio, path, req);
-		BIO_free_all(cbio);
-		cbio = NULL;
-		if (!resp)
-			{
-			BIO_printf(bio_err, "Error querying OCSP responsder\n");
-			goto end;
-			}
 		}
 	else if (respin)
 		{
@@ -887,23 +914,23 @@ end:
 	OCSP_REQUEST_free(req);
 	OCSP_RESPONSE_free(resp);
 	OCSP_BASICRESP_free(bs);
-	sk_free(reqnames);
+	sk_OPENSSL_STRING_free(reqnames);
 	sk_OCSP_CERTID_free(ids);
 	sk_X509_pop_free(sign_other, X509_free);
 	sk_X509_pop_free(verify_other, X509_free);
+	sk_CONF_VALUE_pop_free(headers, X509V3_conf_free);
 
 	if (use_ssl != -1)
 		{
 		OPENSSL_free(host);
 		OPENSSL_free(port);
 		OPENSSL_free(path);
-		SSL_CTX_free(ctx);
 		}
 
 	OPENSSL_EXIT(ret);
 }
 
-static int add_ocsp_cert(OCSP_REQUEST **req, X509 *cert, X509 *issuer,
+static int add_ocsp_cert(OCSP_REQUEST **req, X509 *cert, const EVP_MD *cert_id_md,X509 *issuer,
 				STACK_OF(OCSP_CERTID) *ids)
 	{
 	OCSP_CERTID *id;
@@ -914,7 +941,7 @@ static int add_ocsp_cert(OCSP_REQUEST **req, X509 *cert, X509 *issuer,
 		}
 	if(!*req) *req = OCSP_REQUEST_new();
 	if(!*req) goto err;
-	id = OCSP_cert_to_id(NULL, cert, issuer);
+	id = OCSP_cert_to_id(cert_id_md, cert, issuer);
 	if(!id || !sk_OCSP_CERTID_push(ids, id)) goto err;
 	if(!OCSP_request_add0_id(*req, id)) goto err;
 	return 1;
@@ -924,7 +951,7 @@ static int add_ocsp_cert(OCSP_REQUEST **req, X509 *cert, X509 *issuer,
 	return 0;
 	}
 
-static int add_ocsp_serial(OCSP_REQUEST **req, char *serial, X509 *issuer,
+static int add_ocsp_serial(OCSP_REQUEST **req, char *serial,const EVP_MD *cert_id_md, X509 *issuer,
 				STACK_OF(OCSP_CERTID) *ids)
 	{
 	OCSP_CERTID *id;
@@ -946,7 +973,7 @@ static int add_ocsp_serial(OCSP_REQUEST **req, char *serial, X509 *issuer,
 		BIO_printf(bio_err, "Error converting serial number %s\n", serial);
 		return 0;
 		}
-	id = OCSP_cert_id_new(EVP_sha1(), iname, ikey, sno);
+	id = OCSP_cert_id_new(cert_id_md, iname, ikey, sno);
 	ASN1_INTEGER_free(sno);
 	if(!id || !sk_OCSP_CERTID_push(ids, id)) goto err;
 	if(!OCSP_request_add0_id(*req, id)) goto err;
@@ -958,8 +985,9 @@ static int add_ocsp_serial(OCSP_REQUEST **req, char *serial, X509 *issuer,
 	}
 
 static int print_ocsp_summary(BIO *out, OCSP_BASICRESP *bs, OCSP_REQUEST *req,
-					STACK *names, STACK_OF(OCSP_CERTID) *ids,
-					long nsec, long maxage)
+			      STACK_OF(OPENSSL_STRING) *names,
+			      STACK_OF(OCSP_CERTID) *ids, long nsec,
+			      long maxage)
 	{
 	OCSP_CERTID *id;
 	char *name;
@@ -969,13 +997,13 @@ static int print_ocsp_summary(BIO *out, OCSP_BASICRESP *bs, OCSP_REQUEST *req,
 
 	ASN1_GENERALIZEDTIME *rev, *thisupd, *nextupd;
 
-	if (!bs || !req || !sk_num(names) || !sk_OCSP_CERTID_num(ids))
+	if (!bs || !req || !sk_OPENSSL_STRING_num(names) || !sk_OCSP_CERTID_num(ids))
 		return 1;
 
 	for (i = 0; i < sk_OCSP_CERTID_num(ids); i++)
 		{
 		id = sk_OCSP_CERTID_value(ids, i);
-		name = sk_value(names, i);
+		name = sk_OPENSSL_STRING_value(names, i);
 		BIO_printf(out, "%s: ", name);
 
 		if(!OCSP_resp_find_status(bs, id, &status, &reason,
@@ -1032,7 +1060,6 @@ static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, CA_DB *db
 	OCSP_BASICRESP *bs = NULL;
 	int i, id_count, ret = 1;
 
-
 	id_count = OCSP_request_onereq_count(req);
 
 	if (id_count <= 0)
@@ -1041,7 +1068,6 @@ static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, CA_DB *db
 		goto end;
 		}
 
-	ca_id = OCSP_cert_to_id(EVP_sha1(), NULL, ca);
 
 	bs = OCSP_BASICRESP_new();
 	thisupd = X509_gmtime_adj(NULL, 0);
@@ -1054,8 +1080,23 @@ static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, CA_DB *db
 		OCSP_ONEREQ *one;
 		ASN1_INTEGER *serial;
 		char **inf;
+		ASN1_OBJECT *cert_id_md_oid;
+		const EVP_MD *cert_id_md;
 		one = OCSP_request_onereq_get0(req, i);
 		cid = OCSP_onereq_get0_id(one);
+
+		OCSP_id_get0_info(NULL,&cert_id_md_oid, NULL,NULL, cid);
+
+		cert_id_md = EVP_get_digestbyobj(cert_id_md_oid);	
+		if (! cert_id_md) 
+			{
+			*resp = OCSP_response_create(OCSP_RESPONSE_STATUS_INTERNALERROR,
+				NULL);
+				goto end;
+			}	
+		if (ca_id) OCSP_CERTID_free(ca_id);
+		ca_id = OCSP_cert_to_id(cert_id_md, NULL, ca);
+
 		/* Is this request about our CA? */
 		if (OCSP_id_issuer_cmp(ca_id, cid))
 			{
@@ -1100,8 +1141,8 @@ static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, CA_DB *db
 		}
 
 	OCSP_copy_nonce(bs, req);
-		
-	OCSP_basic_sign(bs, rcert, rkey, EVP_sha1(), rother, flags);
+	
+	OCSP_basic_sign(bs, rcert, rkey, NULL, rother, flags);
 
 	*resp = OCSP_response_create(OCSP_RESPONSE_STATUS_SUCCESSFUL, bs);
 
@@ -1121,6 +1162,7 @@ static char **lookup_serial(CA_DB *db, ASN1_INTEGER *ser)
 	char *itmp, *row[DB_NUMBER],**rrow;
 	for (i = 0; i < DB_NUMBER; i++) row[i] = NULL;
 	bn = ASN1_INTEGER_to_BN(ser,NULL);
+	OPENSSL_assert(bn); /* FIXME: should report an error at this point and abort */
 	if (BN_is_zero(bn))
 		itmp = BUF_strdup("00");
 	else
@@ -1231,4 +1273,149 @@ static int send_ocsp_response(BIO *cbio, OCSP_RESPONSE *resp)
 	return 1;
 	}
 
+static OCSP_RESPONSE *query_responder(BIO *err, BIO *cbio, char *path,
+				STACK_OF(CONF_VALUE) *headers,
+				OCSP_REQUEST *req, int req_timeout)
+	{
+	int fd;
+	int rv;
+	int i;
+	OCSP_REQ_CTX *ctx = NULL;
+	OCSP_RESPONSE *rsp = NULL;
+	fd_set confds;
+	struct timeval tv;
+
+	if (req_timeout != -1)
+		BIO_set_nbio(cbio, 1);
+
+	rv = BIO_do_connect(cbio);
+
+	if ((rv <= 0) && ((req_timeout == -1) || !BIO_should_retry(cbio)))
+		{
+		BIO_puts(err, "Error connecting BIO\n");
+		return NULL;
+		}
+
+	if (BIO_get_fd(cbio, &fd) <= 0)
+		{
+		BIO_puts(err, "Can't get connection fd\n");
+		goto err;
+		}
+
+	if (req_timeout != -1 && rv <= 0)
+		{
+		FD_ZERO(&confds);
+		openssl_fdset(fd, &confds);
+		tv.tv_usec = 0;
+		tv.tv_sec = req_timeout;
+		rv = select(fd + 1, NULL, (void *)&confds, NULL, &tv);
+		if (rv == 0)
+			{
+			BIO_puts(err, "Timeout on connect\n");
+			return NULL;
+			}
+		}
+
+
+	ctx = OCSP_sendreq_new(cbio, path, NULL, -1);
+	if (!ctx)
+		return NULL;
+
+	for (i = 0; i < sk_CONF_VALUE_num(headers); i++)
+		{
+		CONF_VALUE *hdr = sk_CONF_VALUE_value(headers, i);
+		if (!OCSP_REQ_CTX_add1_header(ctx, hdr->name, hdr->value))
+			goto err;
+		}
+
+	if (!OCSP_REQ_CTX_set1_req(ctx, req))
+		goto err;
+	
+	for (;;)
+		{
+		rv = OCSP_sendreq_nbio(&rsp, ctx);
+		if (rv != -1)
+			break;
+		if (req_timeout == -1)
+			continue;
+		FD_ZERO(&confds);
+		openssl_fdset(fd, &confds);
+		tv.tv_usec = 0;
+		tv.tv_sec = req_timeout;
+		if (BIO_should_read(cbio))
+			rv = select(fd + 1, (void *)&confds, NULL, NULL, &tv);
+		else if (BIO_should_write(cbio))
+			rv = select(fd + 1, NULL, (void *)&confds, NULL, &tv);
+		else
+			{
+			BIO_puts(err, "Unexpected retry condition\n");
+			goto err;
+			}
+		if (rv == 0)
+			{
+			BIO_puts(err, "Timeout on request\n");
+			break;
+			}
+		if (rv == -1)
+			{
+			BIO_puts(err, "Select error\n");
+			break;
+			}
+
+		}
+	err:
+	if (ctx)
+		OCSP_REQ_CTX_free(ctx);
+
+	return rsp;
+	}
+
+OCSP_RESPONSE *process_responder(BIO *err, OCSP_REQUEST *req,
+			char *host, char *path, char *port, int use_ssl,
+			STACK_OF(CONF_VALUE) *headers,
+			int req_timeout)
+	{
+	BIO *cbio = NULL;
+	SSL_CTX *ctx = NULL;
+	OCSP_RESPONSE *resp = NULL;
+	cbio = BIO_new_connect(host);
+	if (!cbio)
+		{
+		BIO_printf(err, "Error creating connect BIO\n");
+		goto end;
+		}
+	if (port) BIO_set_conn_port(cbio, port);
+	if (use_ssl == 1)
+		{
+		BIO *sbio;
+#if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
+		ctx = SSL_CTX_new(SSLv23_client_method());
+#elif !defined(OPENSSL_NO_SSL3)
+		ctx = SSL_CTX_new(SSLv3_client_method());
+#elif !defined(OPENSSL_NO_SSL2)
+		ctx = SSL_CTX_new(SSLv2_client_method());
+#else
+		BIO_printf(err, "SSL is disabled\n");
+			goto end;
+#endif
+		if (ctx == NULL)
+			{
+			BIO_printf(err, "Error creating SSL context.\n");
+			goto end;
+			}
+		SSL_CTX_set_mode(ctx, SSL_MODE_AUTO_RETRY);
+		sbio = BIO_new_ssl(ctx, 1);
+		cbio = BIO_push(sbio, cbio);
+		}
+	resp = query_responder(err, cbio, path, headers, req, req_timeout);
+	if (!resp)
+		BIO_printf(bio_err, "Error querying OCSP responsder\n");
+	end:
+	if (cbio)
+		BIO_free_all(cbio);
+	if (ctx)
+		SSL_CTX_free(ctx);
+	return resp;
+	}
+
 #endif

apps/openssl-vms.cnf

@@ -21,12 +21,17 @@ oid_section		= new_oids
 
 [ new_oids ]
 
-# We can add new OIDs in here for use by 'ca' and 'req'.
+# We can add new OIDs in here for use by 'ca', 'req' and 'ts'.
 # Add a simple OID like this:
 # testoid1=1.2.3.4
 # Or use config file substitution like this:
 # testoid2=${testoid1}.5.6
 
+# Policies used by the TSA examples.
+tsa_policy1 = 1.2.3.4.1
+tsa_policy2 = 1.2.3.4.5.6
+tsa_policy3 = 1.2.3.4.5.7
+
 ####################################################################
 [ ca ]
 default_ca	= CA_default		# The default ca section
@@ -67,7 +72,7 @@ cert_opt 	= ca_default		# Certificate field options
 
 default_days	= 365			# how long to certify for
 default_crl_days= 30			# how long before next CRL
-default_md	= sha1			# which md to use.
+default_md	= default		# use public key default MD
 preserve	= no			# keep passed DN ordering
 
 # A few difference way of specifying how similar the request should look
@@ -110,13 +115,12 @@ x509_extensions	= v3_ca	# The extentions to add to the self signed cert
 
 # This sets a mask for permitted string types. There are several options. 
 # default: PrintableString, T61String, BMPString.
-# pkix	 : PrintableString, BMPString.
-# utf8only: only UTF8Strings.
+# pkix	 : PrintableString, BMPString (PKIX recommendation before 2004)
+# utf8only: only UTF8Strings (PKIX recommendation after 2004).
 # nombstr : PrintableString, T61String (no BMPStrings or UTF8Strings).
 # MASK:XXXX a literal mask value.
-# WARNING: current versions of Netscape crash on BMPStrings or UTF8Strings
-# so use this option with caution!
-string_mask = nombstr
+# WARNING: ancient versions of Netscape crash on BMPStrings or UTF8Strings.
+string_mask = utf8only
 
 # req_extensions = v3_req # The extensions to add to a certificate request
 
@@ -207,6 +211,9 @@ authorityKeyIdentifier=keyid,issuer
 #nsCaPolicyUrl
 #nsSslServerName
 
+# This is required for TSA certificates.
+# extendedKeyUsage = critical,timeStamping
+
 [ v3_req ]
 
 # Extensions to add to a certificate request
@@ -224,7 +231,7 @@ keyUsage = nonRepudiation, digitalSignature, keyEncipherment
 
 subjectKeyIdentifier=hash
 
-authorityKeyIdentifier=keyid:always,issuer:always
+authorityKeyIdentifier=keyid:always,issuer
 
 # This is what PKIX recommends but some broken software chokes on critical
 # extensions.
@@ -257,7 +264,7 @@ basicConstraints = CA:true
 # Only issuerAltName and authorityKeyIdentifier make any sense in a CRL.
 
 # issuerAltName=issuer:copy
-authorityKeyIdentifier=keyid:always,issuer:always
+authorityKeyIdentifier=keyid:always
 
 [ proxy_cert_ext ]
 # These extensions should be added when creating a proxy certificate
@@ -290,7 +297,7 @@ nsComment			= "OpenSSL Generated Certificate"
 
 # PKIX recommendations harmless if included in all certificates.
 subjectKeyIdentifier=hash
-authorityKeyIdentifier=keyid,issuer:always
+authorityKeyIdentifier=keyid,issuer
 
 # This stuff is for subjectAltName and issuerAltname.
 # Import the email address.
@@ -311,3 +318,33 @@ authorityKeyIdentifier=keyid,issuer:always
 
 # This really needs to be in place for it to be a proxy certificate.
 proxyCertInfo=critical,language:id-ppl-anyLanguage,pathlen:3,policy:foo
+
+####################################################################
+[ tsa ]
+
+default_tsa = tsa_config1	# the default TSA section
+
+[ tsa_config1 ]
+
+# These are used by the TSA reply generation only.
+dir		= sys\$disk:[.demoCA		# TSA root directory
+serial		= $dir]tsaserial.	# The current serial number (mandatory)
+crypto_device	= builtin		# OpenSSL engine to use for signing
+signer_cert	= $dir/tsacert.pem 	# The TSA signing certificate
+					# (optional)
+certs		= $dir.cacert.pem]	# Certificate chain to include in reply
+					# (optional)
+signer_key	= $dir/private/tsakey.pem # The TSA private key (optional)
+
+default_policy	= tsa_policy1		# Policy if request did not specify it
+					# (optional)
+other_policies	= tsa_policy2, tsa_policy3	# acceptable policies (optional)
+digests		= md5, sha1		# Acceptable message digests (mandatory)
+accuracy	= secs:1, millisecs:500, microsecs:100	# (optional)
+clock_precision_digits  = 0	# number of digits after dot. (optional)
+ordering		= yes	# Is ordering defined for timestamps?
+				# (optional, default: no)
+tsa_name		= yes	# Must the TSA name be included in the reply?
+				# (optional, default: no)
+ess_cert_id_chain	= no	# Must the ESS cert id chain be included?
+				# (optional, default: no)

apps/openssl.c

@@ -135,12 +135,11 @@
  * type of "FUNCTION*"). This removes the necessity for macro-generated wrapper
  * functions. */
 
-/* static unsigned long MS_CALLBACK hash(FUNCTION *a); */
-static unsigned long MS_CALLBACK hash(const void *a_void);
-/* static int MS_CALLBACK cmp(FUNCTION *a,FUNCTION *b); */
-static int MS_CALLBACK cmp(const void *a_void,const void *b_void);
-static LHASH *prog_init(void );
-static int do_cmd(LHASH *prog,int argc,char *argv[]);
+static LHASH_OF(FUNCTION) *prog_init(void );
+static int do_cmd(LHASH_OF(FUNCTION) *prog,int argc,char *argv[]);
+static void list_pkey(BIO *out);
+static void list_cipher(BIO *out);
+static void list_md(BIO *out);
 char *default_config_file=NULL;
 
 /* Make sure there is only one when MONOLITH is defined */
@@ -226,7 +225,7 @@ int main(int Argc, char *Argv[])
 	int n,i,ret=0;
 	int argc;
 	char **argv,*p;
-	LHASH *prog=NULL;
+	LHASH_OF(FUNCTION) *prog=NULL;
 	long errline;
  
 	arg.data=NULL;
@@ -273,9 +272,21 @@ int main(int Argc, char *Argv[])
 	i=NCONF_load(config,p,&errline);
 	if (i == 0)
 		{
-		NCONF_free(config);
-		config = NULL;
-		ERR_clear_error();
+		if (ERR_GET_REASON(ERR_peek_last_error())
+		    == CONF_R_NO_SUCH_FILE)
+			{
+			BIO_printf(bio_err,
+				   "WARNING: can't open config file: %s\n",p);
+			ERR_clear_error();
+			NCONF_free(config);
+			config = NULL;
+			}
+		else
+			{
+			ERR_print_errors(bio_err);
+			NCONF_free(config);
+			exit(1);
+			}
 		}
 
 	prog=prog_init();
@@ -284,7 +295,7 @@ int main(int Argc, char *Argv[])
 	program_name(Argv[0],pname,sizeof pname);
 
 	f.name=pname;
-	fp=(FUNCTION *)lh_retrieve(prog,&f);
+	fp=lh_FUNCTION_retrieve(prog,&f);
 	if (fp != NULL)
 		{
 		Argv[0]=pname;
@@ -319,7 +330,8 @@ int main(int Argc, char *Argv[])
 			else	prompt="OpenSSL> ";
 			fputs(prompt,stdout);
 			fflush(stdout);
-			fgets(p,n,stdin);
+			if (!fgets(p,n,stdin))
+				goto end;
 			if (p[0] == '\0') goto end;
 			i=strlen(p);
 			if (i <= 1) break;
@@ -350,7 +362,7 @@ end:
 		NCONF_free(config);
 		config=NULL;
 		}
-	if (prog != NULL) lh_free(prog);
+	if (prog != NULL) lh_FUNCTION_free(prog);
 	if (arg.data != NULL) OPENSSL_free(arg.data);
 
 	apps_shutdown();
@@ -366,9 +378,13 @@ end:
 
 #define LIST_STANDARD_COMMANDS "list-standard-commands"
 #define LIST_MESSAGE_DIGEST_COMMANDS "list-message-digest-commands"
+#define LIST_MESSAGE_DIGEST_ALGORITHMS "list-message-digest-algorithms"
 #define LIST_CIPHER_COMMANDS "list-cipher-commands"
+#define LIST_CIPHER_ALGORITHMS "list-cipher-algorithms"
+#define LIST_PUBLIC_KEY_ALGORITHMS "list-public-key-algorithms"
 
-static int do_cmd(LHASH *prog, int argc, char *argv[])
+
+static int do_cmd(LHASH_OF(FUNCTION) *prog, int argc, char *argv[])
 	{
 	FUNCTION f,*fp;
 	int i,ret=1,tp,nl;
@@ -376,7 +392,22 @@ static int do_cmd(LHASH *prog, int argc, char *argv[])
 	if ((argc <= 0) || (argv[0] == NULL))
 		{ ret=0; goto end; }
 	f.name=argv[0];
-	fp=(FUNCTION *)lh_retrieve(prog,&f);
+	fp=lh_FUNCTION_retrieve(prog,&f);
+	if (fp == NULL)
+		{
+		if (EVP_get_digestbyname(argv[0]))
+			{
+			f.type = FUNC_TYPE_MD;
+			f.func = dgst_main;
+			fp = &f;
+			}
+		else if (EVP_get_cipherbyname(argv[0]))
+			{
+			f.type = FUNC_TYPE_CIPHER;
+			f.func = enc_main;
+			fp = &f;
+			}
+		}
 	if (fp != NULL)
 		{
 		ret=fp->func(argc,argv);
@@ -391,7 +422,7 @@ static int do_cmd(LHASH *prog, int argc, char *argv[])
 		}
 #endif
 		f.name=argv[0]+3;
-		ret = (lh_retrieve(prog,&f) != NULL);
+		ret = (lh_FUNCTION_retrieve(prog,&f) != NULL);
 		if (!ret)
 			BIO_printf(bio_stdout, "%s\n", argv[0]);
 		else
@@ -409,7 +440,10 @@ static int do_cmd(LHASH *prog, int argc, char *argv[])
 		}
 	else if ((strcmp(argv[0],LIST_STANDARD_COMMANDS) == 0) ||
 		(strcmp(argv[0],LIST_MESSAGE_DIGEST_COMMANDS) == 0) ||
-		(strcmp(argv[0],LIST_CIPHER_COMMANDS) == 0))
+		(strcmp(argv[0],LIST_MESSAGE_DIGEST_ALGORITHMS) == 0) ||
+		(strcmp(argv[0],LIST_CIPHER_COMMANDS) == 0) ||
+		(strcmp(argv[0],LIST_CIPHER_ALGORITHMS) == 0) ||
+		(strcmp(argv[0],LIST_PUBLIC_KEY_ALGORITHMS) == 0))
 		{
 		int list_type;
 		BIO *bio_stdout;
@@ -418,6 +452,12 @@ static int do_cmd(LHASH *prog, int argc, char *argv[])
 			list_type = FUNC_TYPE_GENERAL;
 		else if (strcmp(argv[0],LIST_MESSAGE_DIGEST_COMMANDS) == 0)
 			list_type = FUNC_TYPE_MD;
+		else if (strcmp(argv[0],LIST_MESSAGE_DIGEST_ALGORITHMS) == 0)
+			list_type = FUNC_TYPE_MD_ALG;
+		else if (strcmp(argv[0],LIST_PUBLIC_KEY_ALGORITHMS) == 0)
+			list_type = FUNC_TYPE_PKEY;
+		else if (strcmp(argv[0],LIST_CIPHER_ALGORITHMS) == 0)
+			list_type = FUNC_TYPE_CIPHER_ALG;
 		else /* strcmp(argv[0],LIST_CIPHER_COMMANDS) == 0 */
 			list_type = FUNC_TYPE_CIPHER;
 		bio_stdout = BIO_new_fp(stdout,BIO_NOCLOSE);
@@ -427,10 +467,23 @@ static int do_cmd(LHASH *prog, int argc, char *argv[])
 		bio_stdout = BIO_push(tmpbio, bio_stdout);
 		}
 #endif
-		
-		for (fp=functions; fp->name != NULL; fp++)
-			if (fp->type == list_type)
-				BIO_printf(bio_stdout, "%s\n", fp->name);
+
+		if (!load_config(bio_err, NULL))
+			goto end;
+
+		if (list_type == FUNC_TYPE_PKEY)
+			list_pkey(bio_stdout);	
+		if (list_type == FUNC_TYPE_MD_ALG)
+			list_md(bio_stdout);	
+		if (list_type == FUNC_TYPE_CIPHER_ALG)
+			list_cipher(bio_stdout);	
+		else
+			{
+			for (fp=functions; fp->name != NULL; fp++)
+				if (fp->type == list_type)
+					BIO_printf(bio_stdout, "%s\n",
+								fp->name);
+			}
 		BIO_free_all(bio_stdout);
 		ret=0;
 		goto end;
@@ -493,9 +546,94 @@ static int SortFnByName(const void *_f1,const void *_f2)
     return strcmp(f1->name,f2->name);
     }
 
-static LHASH *prog_init(void)
+static void list_pkey(BIO *out)
 	{
-	LHASH *ret;
+	int i;
+	for (i = 0; i < EVP_PKEY_asn1_get_count(); i++)
+		{
+		const EVP_PKEY_ASN1_METHOD *ameth;
+		int pkey_id, pkey_base_id, pkey_flags;
+		const char *pinfo, *pem_str;
+		ameth = EVP_PKEY_asn1_get0(i);
+		EVP_PKEY_asn1_get0_info(&pkey_id, &pkey_base_id, &pkey_flags,
+						&pinfo, &pem_str, ameth);
+		if (pkey_flags & ASN1_PKEY_ALIAS)
+			{
+			BIO_printf(out, "Name: %s\n", 
+					OBJ_nid2ln(pkey_id));
+			BIO_printf(out, "\tType: Alias to %s\n",
+					OBJ_nid2ln(pkey_base_id));
+			}
+		else
+			{
+			BIO_printf(out, "Name: %s\n", pinfo);
+			BIO_printf(out, "\tType: %s Algorithm\n", 
+				pkey_flags & ASN1_PKEY_DYNAMIC ?
+					"External" : "Builtin");
+			BIO_printf(out, "\tOID: %s\n", OBJ_nid2ln(pkey_id));
+			if (pem_str == NULL)
+				pem_str = "(none)";
+			BIO_printf(out, "\tPEM string: %s\n", pem_str);
+			}
+					
+		}
+	}
+
+static void list_cipher_fn(const EVP_CIPHER *c,
+			const char *from, const char *to, void *arg)
+	{
+	if (c)
+		BIO_printf(arg, "%s\n", EVP_CIPHER_name(c));
+	else
+		{
+		if (!from)
+			from = "<undefined>";
+		if (!to)
+			to = "<undefined>";
+		BIO_printf(arg, "%s => %s\n", from, to);
+		}
+	}
+
+static void list_cipher(BIO *out)
+	{
+	EVP_CIPHER_do_all_sorted(list_cipher_fn, out);
+	}
+
+static void list_md_fn(const EVP_MD *m,
+			const char *from, const char *to, void *arg)
+	{
+	if (m)
+		BIO_printf(arg, "%s\n", EVP_MD_name(m));
+	else
+		{
+		if (!from)
+			from = "<undefined>";
+		if (!to)
+			to = "<undefined>";
+		BIO_printf(arg, "%s => %s\n", from, to);
+		}
+	}
+
+static void list_md(BIO *out)
+	{
+	EVP_MD_do_all_sorted(list_md_fn, out);
+	}
+
+static int MS_CALLBACK function_cmp(const FUNCTION *a, const FUNCTION *b)
+	{
+	return strncmp(a->name,b->name,8);
+	}
+static IMPLEMENT_LHASH_COMP_FN(function, FUNCTION)
+
+static unsigned long MS_CALLBACK function_hash(const FUNCTION *a)
+	{
+	return lh_strhash(a->name);
+	}	
+static IMPLEMENT_LHASH_HASH_FN(function, FUNCTION)
+
+static LHASH_OF(FUNCTION) *prog_init(void)
+	{
+	LHASH_OF(FUNCTION) *ret;
 	FUNCTION *f;
 	size_t i;
 
@@ -504,23 +642,11 @@ static LHASH *prog_init(void)
 	    ;
 	qsort(functions,i,sizeof *functions,SortFnByName);
 
-	if ((ret=lh_new(hash, cmp)) == NULL)
+	if ((ret=lh_FUNCTION_new()) == NULL)
 		return(NULL);
 
 	for (f=functions; f->name != NULL; f++)
-		lh_insert(ret,f);
+		(void)lh_FUNCTION_insert(ret,f);
 	return(ret);
 	}
 
-/* static int MS_CALLBACK cmp(FUNCTION *a, FUNCTION *b) */
-static int MS_CALLBACK cmp(const void *a_void, const void *b_void)
-	{
-	return(strncmp(((const FUNCTION *)a_void)->name,
-			((const FUNCTION *)b_void)->name,8));
-	}
-
-/* static unsigned long MS_CALLBACK hash(FUNCTION *a) */
-static unsigned long MS_CALLBACK hash(const void *a_void)
-	{
-	return(lh_strhash(((const FUNCTION *)a_void)->name));
-	}

apps/openssl.cnf

@@ -21,12 +21,17 @@ oid_section		= new_oids
 
 [ new_oids ]
 
-# We can add new OIDs in here for use by 'ca' and 'req'.
+# We can add new OIDs in here for use by 'ca', 'req' and 'ts'.
 # Add a simple OID like this:
 # testoid1=1.2.3.4
 # Or use config file substitution like this:
 # testoid2=${testoid1}.5.6
 
+# Policies used by the TSA examples.
+tsa_policy1 = 1.2.3.4.1
+tsa_policy2 = 1.2.3.4.5.6
+tsa_policy3 = 1.2.3.4.5.7
+
 ####################################################################
 [ ca ]
 default_ca	= CA_default		# The default ca section
@@ -67,7 +72,7 @@ cert_opt 	= ca_default		# Certificate field options
 
 default_days	= 365			# how long to certify for
 default_crl_days= 30			# how long before next CRL
-default_md	= sha1			# which md to use.
+default_md	= default		# use public key default MD
 preserve	= no			# keep passed DN ordering
 
 # A few difference way of specifying how similar the request should look
@@ -110,13 +115,12 @@ x509_extensions	= v3_ca	# The extentions to add to the self signed cert
 
 # This sets a mask for permitted string types. There are several options. 
 # default: PrintableString, T61String, BMPString.
-# pkix	 : PrintableString, BMPString.
-# utf8only: only UTF8Strings.
+# pkix	 : PrintableString, BMPString (PKIX recommendation before 2004)
+# utf8only: only UTF8Strings (PKIX recommendation after 2004).
 # nombstr : PrintableString, T61String (no BMPStrings or UTF8Strings).
 # MASK:XXXX a literal mask value.
-# WARNING: current versions of Netscape crash on BMPStrings or UTF8Strings
-# so use this option with caution!
-string_mask = nombstr
+# WARNING: ancient versions of Netscape crash on BMPStrings or UTF8Strings.
+string_mask = utf8only
 
 # req_extensions = v3_req # The extensions to add to a certificate request
 
@@ -207,6 +211,9 @@ authorityKeyIdentifier=keyid,issuer
 #nsCaPolicyUrl
 #nsSslServerName
 
+# This is required for TSA certificates.
+# extendedKeyUsage = critical,timeStamping
+
 [ v3_req ]
 
 # Extensions to add to a certificate request
@@ -224,7 +231,7 @@ keyUsage = nonRepudiation, digitalSignature, keyEncipherment
 
 subjectKeyIdentifier=hash
 
-authorityKeyIdentifier=keyid:always,issuer:always
+authorityKeyIdentifier=keyid:always,issuer
 
 # This is what PKIX recommends but some broken software chokes on critical
 # extensions.
@@ -257,7 +264,7 @@ basicConstraints = CA:true
 # Only issuerAltName and authorityKeyIdentifier make any sense in a CRL.
 
 # issuerAltName=issuer:copy
-authorityKeyIdentifier=keyid:always,issuer:always
+authorityKeyIdentifier=keyid:always
 
 [ proxy_cert_ext ]
 # These extensions should be added when creating a proxy certificate
@@ -290,7 +297,7 @@ nsComment			= "OpenSSL Generated Certificate"
 
 # PKIX recommendations harmless if included in all certificates.
 subjectKeyIdentifier=hash
-authorityKeyIdentifier=keyid,issuer:always
+authorityKeyIdentifier=keyid,issuer
 
 # This stuff is for subjectAltName and issuerAltname.
 # Import the email address.
@@ -311,3 +318,33 @@ authorityKeyIdentifier=keyid,issuer:always
 
 # This really needs to be in place for it to be a proxy certificate.
 proxyCertInfo=critical,language:id-ppl-anyLanguage,pathlen:3,policy:foo
+
+####################################################################
+[ tsa ]
+
+default_tsa = tsa_config1	# the default TSA section
+
+[ tsa_config1 ]
+
+# These are used by the TSA reply generation only.
+dir		= ./demoCA		# TSA root directory
+serial		= $dir/tsaserial	# The current serial number (mandatory)
+crypto_device	= builtin		# OpenSSL engine to use for signing
+signer_cert	= $dir/tsacert.pem 	# The TSA signing certificate
+					# (optional)
+certs		= $dir/cacert.pem	# Certificate chain to include in reply
+					# (optional)
+signer_key	= $dir/private/tsakey.pem # The TSA private key (optional)
+
+default_policy	= tsa_policy1		# Policy if request did not specify it
+					# (optional)
+other_policies	= tsa_policy2, tsa_policy3	# acceptable policies (optional)
+digests		= md5, sha1		# Acceptable message digests (mandatory)
+accuracy	= secs:1, millisecs:500, microsecs:100	# (optional)
+clock_precision_digits  = 0	# number of digits after dot. (optional)
+ordering		= yes	# Is ordering defined for timestamps?
+				# (optional, default: no)
+tsa_name		= yes	# Must the TSA name be included in the reply?
+				# (optional, default: no)
+ess_cert_id_chain	= no	# Must the ESS cert id chain be included?
+				# (optional, default: no)

apps/pkcs12.c

@@ -1,5 +1,5 @@
 /* pkcs12.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
+/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
  * project.
  */
 /* ====================================================================
@@ -88,6 +88,7 @@ int print_attribs(BIO *out, STACK_OF(X509_ATTRIBUTE) *attrlst,const char *name);
 void hex_prin(BIO *out, unsigned char *buf, int len);
 int alg_print(BIO *x, X509_ALGOR *alg);
 int cert_load(BIO *in, STACK_OF(X509) *sk);
+static int set_pbe(BIO *err, int *ppbe, const char *str);
 
 int MAIN(int, char **);
 
@@ -100,6 +101,7 @@ int MAIN(int argc, char **argv)
     char **args;
     char *name = NULL;
     char *csp_name = NULL;
+    int add_lmk = 0;
     PKCS12 *p12 = NULL;
     char pass[50], macpass[50];
     int export_cert = 0;
@@ -115,11 +117,12 @@ int MAIN(int argc, char **argv)
     int ret = 1;
     int macver = 1;
     int noprompt = 0;
-    STACK *canames = NULL;
+    STACK_OF(OPENSSL_STRING) *canames = NULL;
     char *cpass = NULL, *mpass = NULL;
     char *passargin = NULL, *passargout = NULL, *passarg = NULL;
     char *passin = NULL, *passout = NULL;
     char *inrand = NULL;
+    char *macalg = NULL;
     char *CApath = NULL, *CAfile = NULL;
 #ifndef OPENSSL_NO_ENGINE
     char *engine=NULL;
@@ -177,33 +180,18 @@ int MAIN(int argc, char **argv)
 					 maciter = 1;
 		else if (!strcmp (*args, "-nomac"))
 					 maciter = -1;
+		else if (!strcmp (*args, "-macalg"))
+		    if (args[1]) {
+			args++;	
+			macalg = *args;
+		    } else badarg = 1;
 		else if (!strcmp (*args, "-nodes")) enc=NULL;
 		else if (!strcmp (*args, "-certpbe")) {
-			if (args[1]) {
-				args++;
-				if (!strcmp(*args, "NONE"))
-					cert_pbe = -1;
-				else
-					cert_pbe=OBJ_txt2nid(*args);
-				if(cert_pbe == NID_undef) {
-					BIO_printf(bio_err,
-						 "Unknown PBE algorithm %s\n", *args);
-					badarg = 1;
-				}
-			} else badarg = 1;
+			if (!set_pbe(bio_err, &cert_pbe, *++args))
+				badarg = 1;
 		} else if (!strcmp (*args, "-keypbe")) {
-			if (args[1]) {
-				args++;
-				if (!strcmp(*args, "NONE"))
-					key_pbe = -1;
-				else
-					key_pbe=OBJ_txt2nid(*args);
-				if(key_pbe == NID_undef) {
-					BIO_printf(bio_err,
-						 "Unknown PBE algorithm %s\n", *args);
-					badarg = 1;
-				}
-			} else badarg = 1;
+			if (!set_pbe(bio_err, &key_pbe, *++args))
+				badarg = 1;
 		} else if (!strcmp (*args, "-rand")) {
 		    if (args[1]) {
 			args++;	
@@ -224,7 +212,9 @@ int MAIN(int argc, char **argv)
 			args++;	
 			name = *args;
 		    } else badarg = 1;
-		} else if (!strcmp (*args, "-CSP")) {
+		} else if (!strcmp (*args, "-LMK"))
+			add_lmk = 1;
+		else if (!strcmp (*args, "-CSP")) {
 		    if (args[1]) {
 			args++;	
 			csp_name = *args;
@@ -232,8 +222,8 @@ int MAIN(int argc, char **argv)
 		} else if (!strcmp (*args, "-caname")) {
 		    if (args[1]) {
 			args++;	
-			if (!canames) canames = sk_new_null();
-			sk_push(canames, *args);
+			if (!canames) canames = sk_OPENSSL_STRING_new_null();
+			sk_OPENSSL_STRING_push(canames, *args);
 		    } else badarg = 1;
 		} else if (!strcmp (*args, "-in")) {
 		    if (args[1]) {
@@ -322,11 +312,14 @@ int MAIN(int argc, char **argv)
 #endif
 	BIO_printf (bio_err, "-nodes        don't encrypt private keys\n");
 	BIO_printf (bio_err, "-noiter       don't use encryption iteration\n");
+	BIO_printf (bio_err, "-nomaciter    don't use MAC iteration\n");
 	BIO_printf (bio_err, "-maciter      use MAC iteration\n");
+	BIO_printf (bio_err, "-nomac        don't generate MAC\n");
 	BIO_printf (bio_err, "-twopass      separate MAC, encryption passwords\n");
 	BIO_printf (bio_err, "-descert      encrypt PKCS#12 certificates with triple DES (default RC2-40)\n");
 	BIO_printf (bio_err, "-certpbe alg  specify certificate PBE algorithm (default RC2-40)\n");
 	BIO_printf (bio_err, "-keypbe alg   specify private key PBE algorithm (default 3DES)\n");
+	BIO_printf (bio_err, "-macalg alg   digest algorithm used in MAC (default SHA1)\n");
 	BIO_printf (bio_err, "-keyex        set MS key exchange type\n");
 	BIO_printf (bio_err, "-keysig       set MS key signature type\n");
 	BIO_printf (bio_err, "-password p   set import/export password source\n");
@@ -338,6 +331,8 @@ int MAIN(int argc, char **argv)
 	BIO_printf(bio_err,  "-rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 	BIO_printf(bio_err,  "              load the file (or the files in the directory) into\n");
 	BIO_printf(bio_err,  "              the random number generator\n");
+	BIO_printf(bio_err,  "-CSP name     Microsoft CSP name\n");
+	BIO_printf(bio_err,  "-LMK          Add local machine keyset attribute to private key\n");
     	goto end;
     }
 
@@ -427,6 +422,7 @@ int MAIN(int argc, char **argv)
 	EVP_PKEY *key = NULL;
 	X509 *ucert = NULL, *x = NULL;
 	STACK_OF(X509) *certs=NULL;
+	const EVP_MD *macmd = NULL;
 	unsigned char *catmp = NULL;
 	int i;
 
@@ -553,16 +549,18 @@ int MAIN(int argc, char **argv)
 
 	/* Add any CA names */
 
-	for (i = 0; i < sk_num(canames); i++)
+	for (i = 0; i < sk_OPENSSL_STRING_num(canames); i++)
 		{
-		catmp = (unsigned char *)sk_value(canames, i);
+		catmp = (unsigned char *)sk_OPENSSL_STRING_value(canames, i);
 		X509_alias_set1(sk_X509_value(certs, i), catmp, -1);
 		}
 
 	if (csp_name && key)
 		EVP_PKEY_add1_attr_by_NID(key, NID_ms_csp_name,
 				MBSTRING_ASC, (unsigned char *)csp_name, -1);
-		
+
+	if (add_lmk && key)
+		EVP_PKEY_add1_attr_by_NID(key, NID_LocalKeySet, 0, NULL, -1);
 
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
@@ -591,8 +589,18 @@ int MAIN(int argc, char **argv)
 		goto export_end;
 		}
 
+	if (macalg)
+		{
+		macmd = EVP_get_digestbyname(macalg);
+		if (!macmd)
+			{
+			BIO_printf(bio_err, "Unknown digest algorithm %s\n", 
+						macalg);
+			}
+		}
+
 	if (maciter != -1)
-		PKCS12_set_mac(p12, mpass, -1, NULL, 0, maciter, NULL);
+		PKCS12_set_mac(p12, mpass, -1, NULL, 0, maciter, macmd);
 
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
@@ -679,7 +687,7 @@ int MAIN(int argc, char **argv)
 #endif
     BIO_free(in);
     BIO_free_all(out);
-    if (canames) sk_free(canames);
+    if (canames) sk_OPENSSL_STRING_free(canames);
     if(passin) OPENSSL_free(passin);
     if(passout) OPENSSL_free(passout);
     apps_shutdown();
@@ -915,7 +923,7 @@ int print_attribs (BIO *out, STACK_OF(X509_ATTRIBUTE) *attrlst,const char *name)
 			av = sk_ASN1_TYPE_value(attr->value.set, 0);
 			switch(av->type) {
 				case V_ASN1_BMPSTRING:
-        			value = uni2asc(av->value.bmpstring->data,
+        			value = OPENSSL_uni2asc(av->value.bmpstring->data,
                                 	       av->value.bmpstring->length);
 				BIO_printf(out, "%s\n", value);
 				OPENSSL_free(value);
@@ -948,4 +956,22 @@ void hex_prin(BIO *out, unsigned char *buf, int len)
 	for (i = 0; i < len; i++) BIO_printf (out, "%02X ", buf[i]);
 }
 
+static int set_pbe(BIO *err, int *ppbe, const char *str)
+	{
+	if (!str)
+		return 0;
+	if (!strcmp(str, "NONE"))
+		{
+		*ppbe = -1;
+		return 1;
+		}
+	*ppbe=OBJ_txt2nid(str);
+	if (*ppbe == NID_undef)
+		{
+		BIO_printf(bio_err, "Unknown PBE algorithm %s\n", str);
+		return 0;
+		}
+	return 1;
+	}
+			
 #endif

apps/pkcs7.c

@@ -90,7 +90,7 @@ int MAIN(int argc, char **argv)
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat;
 	char *infile,*outfile,*prog;
-	int print_certs=0,text=0,noout=0;
+	int print_certs=0,text=0,noout=0,p7_print=0;
 	int ret=1;
 #ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
@@ -139,6 +139,8 @@ int MAIN(int argc, char **argv)
 			noout=1;
 		else if (strcmp(*argv,"-text") == 0)
 			text=1;
+		else if (strcmp(*argv,"-print") == 0)
+			p7_print=1;
 		else if (strcmp(*argv,"-print_certs") == 0)
 			print_certs=1;
 #ifndef OPENSSL_NO_ENGINE
@@ -238,6 +240,9 @@ bad:
 			}
 		}
 
+	if (p7_print)
+		PKCS7_print_ctx(out, p7, 0, NULL);
+
 	if (print_certs)
 		{
 		STACK_OF(X509) *certs=NULL;

apps/pkcs8.c

@@ -1,5 +1,5 @@
 /* pkcs8.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
+/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
  * project 1999-2004.
  */
 /* ====================================================================
@@ -80,11 +80,12 @@ int MAIN(int argc, char **argv)
 	int informat, outformat;
 	int p8_broken = PKCS8_OK;
 	int nocrypt = 0;
-	X509_SIG *p8;
-	PKCS8_PRIV_KEY_INFO *p8inf;
+	X509_SIG *p8 = NULL;
+	PKCS8_PRIV_KEY_INFO *p8inf = NULL;
 	EVP_PKEY *pkey=NULL;
 	char pass[50], *passin = NULL, *passout = NULL, *p8pass = NULL;
 	int badarg = 0;
+	int ret = 1;
 #ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
 #endif
@@ -225,7 +226,7 @@ int MAIN(int argc, char **argv)
 #ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
 #endif
-		return 1;
+		goto end;
 		}
 
 #ifndef OPENSSL_NO_ENGINE
@@ -235,7 +236,7 @@ int MAIN(int argc, char **argv)
 	if (!app_passwd(bio_err, passargin, passargout, &passin, &passout))
 		{
 		BIO_printf(bio_err, "Error getting passwords\n");
-		return 1;
+		goto end;
 		}
 
 	if ((pbe_nid == -1) && !cipher)
@@ -247,7 +248,7 @@ int MAIN(int argc, char **argv)
 			{
 			BIO_printf(bio_err,
 				 "Can't open input file %s\n", infile);
-			return (1);
+			goto end;
 			}
 		}
 	else
@@ -259,7 +260,7 @@ int MAIN(int argc, char **argv)
 			{
 			BIO_printf(bio_err,
 				 "Can't open output file %s\n", outfile);
-			return (1);
+			goto end;
 			}
 		}
 	else
@@ -274,21 +275,15 @@ int MAIN(int argc, char **argv)
 		}
 	if (topk8)
 		{
-		BIO_free(in); /* Not needed in this section */
 		pkey = load_key(bio_err, infile, informat, 1,
 			passin, e, "key");
 		if (!pkey)
-			{
-			BIO_free_all(out);
-			return 1;
-			}
+			goto end;
 		if (!(p8inf = EVP_PKEY2PKCS8_broken(pkey, p8_broken)))
 			{
 			BIO_printf(bio_err, "Error converting key\n");
 			ERR_print_errors(bio_err);
-			EVP_PKEY_free(pkey);
-			BIO_free_all(out);
-			return 1;
+			goto end;
 			}
 		if (nocrypt)
 			{
@@ -299,10 +294,7 @@ int MAIN(int argc, char **argv)
 			else
 				{
 				BIO_printf(bio_err, "Bad format specified for key\n");
-				PKCS8_PRIV_KEY_INFO_free(p8inf);
-				EVP_PKEY_free(pkey);
-				BIO_free_all(out);
-				return (1);
+				goto end;
 				}
 			}
 		else
@@ -313,12 +305,7 @@ int MAIN(int argc, char **argv)
 				{
 				p8pass = pass;
 				if (EVP_read_pw_string(pass, sizeof pass, "Enter Encryption Password:", 1))
-					{
-					PKCS8_PRIV_KEY_INFO_free(p8inf);
-					EVP_PKEY_free(pkey);
-					BIO_free_all(out);
-					return (1);
-					}
+					goto end;
 				}
 			app_RAND_load_file(NULL, bio_err, 0);
 			if (!(p8 = PKCS8_encrypt(pbe_nid, cipher,
@@ -327,10 +314,7 @@ int MAIN(int argc, char **argv)
 				{
 				BIO_printf(bio_err, "Error encrypting key\n");
 				ERR_print_errors(bio_err);
-				PKCS8_PRIV_KEY_INFO_free(p8inf);
-				EVP_PKEY_free(pkey);
-				BIO_free_all(out);
-				return (1);
+				goto end;
 				}
 			app_RAND_write_file(NULL, bio_err);
 			if (outformat == FORMAT_PEM) 
@@ -340,22 +324,12 @@ int MAIN(int argc, char **argv)
 			else
 				{
 				BIO_printf(bio_err, "Bad format specified for key\n");
-				PKCS8_PRIV_KEY_INFO_free(p8inf);
-				EVP_PKEY_free(pkey);
-				BIO_free_all(out);
-				return (1);
+				goto end;
 				}
-			X509_SIG_free(p8);
 			}
 
-		PKCS8_PRIV_KEY_INFO_free (p8inf);
-		EVP_PKEY_free(pkey);
-		BIO_free_all(out);
-		if (passin)
-			OPENSSL_free(passin);
-		if (passout)
-			OPENSSL_free(passout);
-		return (0);
+		ret = 0;
+		goto end;
 		}
 
 	if (nocrypt)
@@ -367,7 +341,7 @@ int MAIN(int argc, char **argv)
 		else
 			{
 			BIO_printf(bio_err, "Bad format specified for key\n");
-			return (1);
+			goto end;
 			}
 		}
 	else
@@ -379,14 +353,14 @@ int MAIN(int argc, char **argv)
 		else
 			{
 			BIO_printf(bio_err, "Bad format specified for key\n");
-			return (1);
+			goto end;
 			}
 
 		if (!p8)
 			{
 			BIO_printf (bio_err, "Error reading key\n");
 			ERR_print_errors(bio_err);
-			return (1);
+			goto end;
 			}
 		if (passin)
 			p8pass = passin;
@@ -396,21 +370,20 @@ int MAIN(int argc, char **argv)
 			EVP_read_pw_string(pass, sizeof pass, "Enter Password:", 0);
 			}
 		p8inf = PKCS8_decrypt(p8, p8pass, strlen(p8pass));
-		X509_SIG_free(p8);
 		}
 
 	if (!p8inf)
 		{
 		BIO_printf(bio_err, "Error decrypting key\n");
 		ERR_print_errors(bio_err);
-		return (1);
+		goto end;
 		}
 
 	if (!(pkey = EVP_PKCS82PKEY(p8inf)))
 		{
 		BIO_printf(bio_err, "Error converting key\n");
 		ERR_print_errors(bio_err);
-		return (1);
+		goto end;
 		}
 	
 	if (p8inf->broken)
@@ -436,7 +409,6 @@ int MAIN(int argc, char **argv)
 		}
 	}
 	
-	PKCS8_PRIV_KEY_INFO_free(p8inf);
 	if (outformat == FORMAT_PEM) 
 		PEM_write_bio_PrivateKey(out, pkey, NULL, NULL, 0, NULL, passout);
 	else if (outformat == FORMAT_ASN1)
@@ -444,10 +416,13 @@ int MAIN(int argc, char **argv)
 	else
 		{
 		BIO_printf(bio_err, "Bad format specified for key\n");
-			return (1);
+			goto end;
 		}
+	ret = 0;
 
 	end:
+	X509_SIG_free(p8);
+	PKCS8_PRIV_KEY_INFO_free(p8inf);
 	EVP_PKEY_free(pkey);
 	BIO_free_all(out);
 	BIO_free(in);
@@ -456,5 +431,5 @@ int MAIN(int argc, char **argv)
 	if (passout)
 		OPENSSL_free(passout);
 
-	return (0);
+	return ret;
 	}

apps/pkey.c

@@ -0,0 +1,284 @@
+/* apps/pkey.c */
+/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
+ * project 2006
+ */
+/* ====================================================================
+ * Copyright (c) 2006 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    licensing@OpenSSL.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+#include <stdio.h>
+#include <string.h>
+#include "apps.h"
+#include <openssl/pem.h>
+#include <openssl/err.h>
+#include <openssl/evp.h>
+
+#define PROG pkey_main
+
+int MAIN(int, char **);
+
+int MAIN(int argc, char **argv)
+	{
+	ENGINE *e = NULL;
+	char **args, *infile = NULL, *outfile = NULL;
+	char *passargin = NULL, *passargout = NULL;
+	BIO *in = NULL, *out = NULL;
+	const EVP_CIPHER *cipher = NULL;
+	int informat, outformat;
+	int pubin = 0, pubout = 0, pubtext = 0, text = 0, noout = 0;
+	EVP_PKEY *pkey=NULL;
+	char *passin = NULL, *passout = NULL;
+	int badarg = 0;
+#ifndef OPENSSL_NO_ENGINE
+	char *engine=NULL;
+#endif
+	int ret = 1;
+
+	if (bio_err == NULL)
+		bio_err = BIO_new_fp (stderr, BIO_NOCLOSE);
+
+	if (!load_config(bio_err, NULL))
+		goto end;
+
+	informat=FORMAT_PEM;
+	outformat=FORMAT_PEM;
+
+	ERR_load_crypto_strings();
+	OpenSSL_add_all_algorithms();
+	args = argv + 1;
+	while (!badarg && *args && *args[0] == '-')
+		{
+		if (!strcmp(*args,"-inform"))
+			{
+			if (args[1])
+				{
+				args++;
+				informat=str2fmt(*args);
+				}
+			else badarg = 1;
+			}
+		else if (!strcmp(*args,"-outform"))
+			{
+			if (args[1])
+				{
+				args++;
+				outformat=str2fmt(*args);
+				}
+			else badarg = 1;
+			}
+		else if (!strcmp(*args,"-passin"))
+			{
+			if (!args[1]) goto bad;
+			passargin= *(++args);
+			}
+		else if (!strcmp(*args,"-passout"))
+			{
+			if (!args[1]) goto bad;
+			passargout= *(++args);
+			}
+#ifndef OPENSSL_NO_ENGINE
+		else if (strcmp(*args,"-engine") == 0)
+			{
+			if (!args[1]) goto bad;
+			engine= *(++args);
+			}
+#endif
+		else if (!strcmp (*args, "-in"))
+			{
+			if (args[1])
+				{
+				args++;
+				infile = *args;
+				}
+			else badarg = 1;
+			}
+		else if (!strcmp (*args, "-out"))
+			{
+			if (args[1])
+				{
+				args++;
+				outfile = *args;
+				}
+			else badarg = 1;
+			}
+		else if (strcmp(*args,"-pubin") == 0)
+			{
+			pubin=1;
+			pubout=1;
+			pubtext=1;
+			}
+		else if (strcmp(*args,"-pubout") == 0)
+			pubout=1;
+		else if (strcmp(*args,"-text_pub") == 0)
+			{
+			pubtext=1;
+			text=1;
+			}
+		else if (strcmp(*args,"-text") == 0)
+			text=1;
+		else if (strcmp(*args,"-noout") == 0)
+			noout=1;
+		else
+			{
+			cipher = EVP_get_cipherbyname(*args + 1);
+			if (!cipher)
+				{
+				BIO_printf(bio_err, "Unknown cipher %s\n",
+								*args + 1);
+				badarg = 1;
+				}
+			}
+		args++;
+		}
+
+	if (badarg)
+		{
+		bad:
+		BIO_printf(bio_err, "Usage pkey [options]\n");
+		BIO_printf(bio_err, "where options are\n");
+		BIO_printf(bio_err, "-in file        input file\n");
+		BIO_printf(bio_err, "-inform X       input format (DER or PEM)\n");
+		BIO_printf(bio_err, "-passin arg     input file pass phrase source\n");
+		BIO_printf(bio_err, "-outform X      output format (DER or PEM)\n");
+		BIO_printf(bio_err, "-out file       output file\n");
+		BIO_printf(bio_err, "-passout arg    output file pass phrase source\n");
+#ifndef OPENSSL_NO_ENGINE
+		BIO_printf(bio_err, "-engine e       use engine e, possibly a hardware device.\n");
+#endif
+		return 1;
+		}
+
+#ifndef OPENSSL_NO_ENGINE
+        e = setup_engine(bio_err, engine, 0);
+#endif
+
+	if (!app_passwd(bio_err, passargin, passargout, &passin, &passout))
+		{
+		BIO_printf(bio_err, "Error getting passwords\n");
+		goto end;
+		}
+
+	if (outfile)
+		{
+		if (!(out = BIO_new_file (outfile, "wb")))
+			{
+			BIO_printf(bio_err,
+				 "Can't open output file %s\n", outfile);
+			goto end;
+			}
+		}
+	else
+		{
+		out = BIO_new_fp (stdout, BIO_NOCLOSE);
+#ifdef OPENSSL_SYS_VMS
+			{
+			BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+			out = BIO_push(tmpbio, out);
+			}
+#endif
+		}
+
+	if (pubin)
+		pkey = load_pubkey(bio_err, infile, informat, 1,
+			passin, e, "Public Key");
+	else
+		pkey = load_key(bio_err, infile, informat, 1,
+			passin, e, "key");
+	if (!pkey)
+		goto end;
+
+	if (!noout)
+		{
+		if (outformat == FORMAT_PEM) 
+			{
+			if (pubout)
+				PEM_write_bio_PUBKEY(out,pkey);
+			else
+				PEM_write_bio_PrivateKey(out, pkey, cipher,
+							NULL, 0, NULL, passout);
+			}
+		else if (outformat == FORMAT_ASN1)
+			{
+			if (pubout)
+				i2d_PUBKEY_bio(out, pkey);
+			else
+				i2d_PrivateKey_bio(out, pkey);
+			}
+		else
+			{
+			BIO_printf(bio_err, "Bad format specified for key\n");
+			goto end;
+			}
+
+		}
+
+	if (text)
+		{
+		if (pubtext)
+			EVP_PKEY_print_public(out, pkey, 0, NULL);
+		else
+			EVP_PKEY_print_private(out, pkey, 0, NULL);
+		}
+
+	ret = 0;
+
+	end:
+	EVP_PKEY_free(pkey);
+	BIO_free_all(out);
+	BIO_free(in);
+	if (passin)
+		OPENSSL_free(passin);
+	if (passout)
+		OPENSSL_free(passout);
+
+	return ret;
+	}

apps/pkeyparam.c

@@ -0,0 +1,201 @@
+/* apps/pkeyparam.c */
+/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
+ * project 2006
+ */
+/* ====================================================================
+ * Copyright (c) 2006 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    licensing@OpenSSL.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+#include <stdio.h>
+#include <string.h>
+#include "apps.h"
+#include <openssl/pem.h>
+#include <openssl/err.h>
+#include <openssl/evp.h>
+
+#define PROG pkeyparam_main
+
+int MAIN(int, char **);
+
+int MAIN(int argc, char **argv)
+	{
+	char **args, *infile = NULL, *outfile = NULL;
+	BIO *in = NULL, *out = NULL;
+	int text = 0, noout = 0;
+	EVP_PKEY *pkey=NULL;
+	int badarg = 0;
+#ifndef OPENSSL_NO_ENGINE
+	ENGINE *e = NULL;
+	char *engine=NULL;
+#endif
+	int ret = 1;
+
+	if (bio_err == NULL)
+		bio_err = BIO_new_fp (stderr, BIO_NOCLOSE);
+
+	if (!load_config(bio_err, NULL))
+		goto end;
+
+	ERR_load_crypto_strings();
+	OpenSSL_add_all_algorithms();
+	args = argv + 1;
+	while (!badarg && *args && *args[0] == '-')
+		{
+		if (!strcmp (*args, "-in"))
+			{
+			if (args[1])
+				{
+				args++;
+				infile = *args;
+				}
+			else badarg = 1;
+			}
+		else if (!strcmp (*args, "-out"))
+			{
+			if (args[1])
+				{
+				args++;
+				outfile = *args;
+				}
+			else badarg = 1;
+			}
+#ifndef OPENSSL_NO_ENGINE
+		else if (strcmp(*args,"-engine") == 0)
+			{
+			if (!args[1]) goto bad;
+			engine= *(++args);
+			}
+#endif
+
+		else if (strcmp(*args,"-text") == 0)
+			text=1;
+		else if (strcmp(*args,"-noout") == 0)
+			noout=1;
+		args++;
+		}
+
+	if (badarg)
+		{
+#ifndef OPENSSL_NO_ENGINE
+		bad:
+#endif
+		BIO_printf(bio_err, "Usage pkeyparam [options]\n");
+		BIO_printf(bio_err, "where options are\n");
+		BIO_printf(bio_err, "-in file        input file\n");
+		BIO_printf(bio_err, "-out file       output file\n");
+		BIO_printf(bio_err, "-text           print parameters as text\n");
+		BIO_printf(bio_err, "-noout          don't output encoded parameters\n");
+#ifndef OPENSSL_NO_ENGINE
+		BIO_printf(bio_err, "-engine e       use engine e, possibly a hardware device.\n");
+#endif
+		return 1;
+		}
+
+#ifndef OPENSSL_NO_ENGINE
+        e = setup_engine(bio_err, engine, 0);
+#endif
+
+	if (infile)
+		{
+		if (!(in = BIO_new_file (infile, "r")))
+			{
+			BIO_printf(bio_err,
+				 "Can't open input file %s\n", infile);
+			goto end;
+			}
+		}
+	else
+		in = BIO_new_fp (stdin, BIO_NOCLOSE);
+
+	if (outfile)
+		{
+		if (!(out = BIO_new_file (outfile, "w")))
+			{
+			BIO_printf(bio_err,
+				 "Can't open output file %s\n", outfile);
+			goto end;
+			}
+		}
+	else
+		{
+		out = BIO_new_fp (stdout, BIO_NOCLOSE);
+#ifdef OPENSSL_SYS_VMS
+			{
+			BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+			out = BIO_push(tmpbio, out);
+			}
+#endif
+		}
+
+	pkey = PEM_read_bio_Parameters(in, NULL);
+	if (!pkey)
+		{
+		BIO_printf(bio_err, "Error reading parameters\n");
+		ERR_print_errors(bio_err);
+		goto end;
+		}
+
+	if (!noout)
+		PEM_write_bio_Parameters(out,pkey);
+
+	if (text)
+		EVP_PKEY_print_params(out, pkey, 0, NULL);
+
+	ret = 0;
+
+	end:
+	EVP_PKEY_free(pkey);
+	BIO_free_all(out);
+	BIO_free(in);
+
+	return ret;
+	}

apps/pkeyutl.c

@@ -0,0 +1,570 @@
+/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
+ * project 2006.
+ */
+/* ====================================================================
+ * Copyright (c) 2006 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    licensing@OpenSSL.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+
+
+#include "apps.h"
+#include <string.h>
+#include <openssl/err.h>
+#include <openssl/pem.h>
+#include <openssl/evp.h>
+
+#define KEY_PRIVKEY	1
+#define KEY_PUBKEY	2
+#define KEY_CERT	3
+
+static void usage(void);
+
+#undef PROG
+
+#define PROG pkeyutl_main
+
+static EVP_PKEY_CTX *init_ctx(int *pkeysize,
+				char *keyfile, int keyform, int key_type,
+				char *passargin, int pkey_op, ENGINE *e);
+
+static int setup_peer(BIO *err, EVP_PKEY_CTX *ctx, int peerform,
+							const char *file);
+
+static int do_keyop(EVP_PKEY_CTX *ctx, int pkey_op,
+		unsigned char *out, size_t *poutlen,
+		unsigned char *in, size_t inlen);
+
+int MAIN(int argc, char **);
+
+int MAIN(int argc, char **argv)
+{
+	BIO *in = NULL, *out = NULL;
+	char *infile = NULL, *outfile = NULL, *sigfile = NULL;
+	ENGINE *e = NULL;
+	int pkey_op = EVP_PKEY_OP_SIGN, key_type = KEY_PRIVKEY;
+	int keyform = FORMAT_PEM, peerform = FORMAT_PEM;
+	char badarg = 0, rev = 0;
+	char hexdump = 0, asn1parse = 0;
+	EVP_PKEY_CTX *ctx = NULL;
+	char *passargin = NULL;
+	int keysize = -1;
+
+	unsigned char *buf_in = NULL, *buf_out = NULL, *sig = NULL;
+	size_t buf_outlen;
+	int buf_inlen = 0, siglen = -1;
+
+	int ret = 1, rv = -1;
+
+	argc--;
+	argv++;
+
+	if(!bio_err) bio_err = BIO_new_fp(stderr, BIO_NOCLOSE);
+
+	if (!load_config(bio_err, NULL))
+		goto end;
+	ERR_load_crypto_strings();
+	OpenSSL_add_all_algorithms();
+	
+	while(argc >= 1)
+		{
+		if (!strcmp(*argv,"-in"))
+			{
+			if (--argc < 1) badarg = 1;
+                        infile= *(++argv);
+			}
+		else if (!strcmp(*argv,"-out"))
+			{
+			if (--argc < 1) badarg = 1;
+			outfile= *(++argv);
+			}
+		else if (!strcmp(*argv,"-sigfile"))
+			{
+			if (--argc < 1) badarg = 1;
+			sigfile= *(++argv);
+			}
+		else if(!strcmp(*argv, "-inkey"))
+			{
+			if (--argc < 1)
+				badarg = 1;
+			else
+				{
+				ctx = init_ctx(&keysize,
+						*(++argv), keyform, key_type,
+						passargin, pkey_op, e);
+				if (!ctx)
+					{
+					BIO_puts(bio_err,
+						"Error initializing context\n");
+					ERR_print_errors(bio_err);
+					badarg = 1;
+					}
+				}
+			}
+		else if (!strcmp(*argv,"-peerkey"))
+			{
+			if (--argc < 1)
+				badarg = 1;
+			else if (!setup_peer(bio_err, ctx, peerform, *(++argv)))
+				badarg = 1;
+			}
+		else if (!strcmp(*argv,"-passin"))
+			{
+			if (--argc < 1) badarg = 1;
+			passargin= *(++argv);
+			}
+		else if (strcmp(*argv,"-peerform") == 0)
+			{
+			if (--argc < 1) badarg = 1;
+			peerform=str2fmt(*(++argv));
+			}
+		else if (strcmp(*argv,"-keyform") == 0)
+			{
+			if (--argc < 1) badarg = 1;
+			keyform=str2fmt(*(++argv));
+			}
+#ifndef OPENSSL_NO_ENGINE
+		else if(!strcmp(*argv, "-engine"))
+			{
+			if (--argc < 1)
+				badarg = 1;
+			else
+				e = setup_engine(bio_err, *(++argv), 0);
+			}
+#endif
+		else if(!strcmp(*argv, "-pubin"))
+			key_type = KEY_PUBKEY;
+		else if(!strcmp(*argv, "-certin"))
+			key_type = KEY_CERT;
+		else if(!strcmp(*argv, "-asn1parse"))
+			asn1parse = 1;
+		else if(!strcmp(*argv, "-hexdump"))
+			hexdump = 1;
+		else if(!strcmp(*argv, "-sign"))
+			pkey_op = EVP_PKEY_OP_SIGN;
+		else if(!strcmp(*argv, "-verify"))
+			pkey_op = EVP_PKEY_OP_VERIFY;
+		else if(!strcmp(*argv, "-verifyrecover"))
+			pkey_op = EVP_PKEY_OP_VERIFYRECOVER;
+		else if(!strcmp(*argv, "-rev"))
+			rev = 1;
+		else if(!strcmp(*argv, "-encrypt"))
+			pkey_op = EVP_PKEY_OP_ENCRYPT;
+		else if(!strcmp(*argv, "-decrypt"))
+			pkey_op = EVP_PKEY_OP_DECRYPT;
+		else if(!strcmp(*argv, "-derive"))
+			pkey_op = EVP_PKEY_OP_DERIVE;
+		else if (strcmp(*argv,"-pkeyopt") == 0)
+			{
+			if (--argc < 1)
+				badarg = 1;
+			else if (!ctx)
+				{
+				BIO_puts(bio_err,
+					"-pkeyopt command before -inkey\n");
+				badarg = 1;
+				}
+			else if (pkey_ctrl_string(ctx, *(++argv)) <= 0)
+				{
+				BIO_puts(bio_err, "parameter setting error\n");
+				ERR_print_errors(bio_err);
+				goto end;
+				}
+			}
+		else badarg = 1;
+		if(badarg)
+			{
+			usage();
+			goto end;
+			}
+		argc--;
+		argv++;
+		}
+
+	if (!ctx)
+		{
+		usage();
+		goto end;
+		}
+
+	if (sigfile && (pkey_op != EVP_PKEY_OP_VERIFY))
+		{
+		BIO_puts(bio_err, "Signature file specified for non verify\n");
+		goto end;
+		}
+
+	if (!sigfile && (pkey_op == EVP_PKEY_OP_VERIFY))
+		{
+		BIO_puts(bio_err, "No signature file specified for verify\n");
+		goto end;
+		}
+
+/* FIXME: seed PRNG only if needed */
+	app_RAND_load_file(NULL, bio_err, 0);
+
+	if (pkey_op != EVP_PKEY_OP_DERIVE)
+		{
+		if(infile)
+			{
+			if(!(in = BIO_new_file(infile, "rb")))
+				{
+				BIO_puts(bio_err,
+					"Error Opening Input File\n");
+				ERR_print_errors(bio_err);	
+				goto end;
+				}
+			}
+		else
+			in = BIO_new_fp(stdin, BIO_NOCLOSE);
+		}
+
+	if(outfile)
+		{
+		if(!(out = BIO_new_file(outfile, "wb")))
+			{
+			BIO_printf(bio_err, "Error Creating Output File\n");
+			ERR_print_errors(bio_err);	
+			goto end;
+			}
+		}
+	else
+		{
+		out = BIO_new_fp(stdout, BIO_NOCLOSE);
+#ifdef OPENSSL_SYS_VMS
+		{
+		    BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+		    out = BIO_push(tmpbio, out);
+		}
+#endif
+	}
+
+	if (sigfile)
+		{
+		BIO *sigbio = BIO_new_file(sigfile, "rb");
+		if (!sigbio)
+			{
+			BIO_printf(bio_err, "Can't open signature file %s\n",
+								sigfile);
+			goto end;
+			}
+		siglen = bio_to_mem(&sig, keysize * 10, sigbio);
+		BIO_free(sigbio);
+		if (siglen <= 0)
+			{
+			BIO_printf(bio_err, "Error reading signature data\n");
+			goto end;
+			}
+		}
+	
+	if (in)
+		{
+		/* Read the input data */
+		buf_inlen = bio_to_mem(&buf_in, keysize * 10, in);
+		if(buf_inlen <= 0)
+			{
+			BIO_printf(bio_err, "Error reading input Data\n");
+			exit(1);
+			}
+		if(rev)
+			{
+			size_t i;
+			unsigned char ctmp;
+			size_t l = (size_t)buf_inlen;
+			for(i = 0; i < l/2; i++)
+				{
+				ctmp = buf_in[i];
+				buf_in[i] = buf_in[l - 1 - i];
+				buf_in[l - 1 - i] = ctmp;
+				}
+			}
+		}
+
+	if(pkey_op == EVP_PKEY_OP_VERIFY)
+		{
+		rv  = EVP_PKEY_verify(ctx, sig, (size_t)siglen,
+				      buf_in, (size_t)buf_inlen);
+		if (rv == 0)
+			BIO_puts(out, "Signature Verification Failure\n");
+		else if (rv == 1)
+			BIO_puts(out, "Signature Verified Successfully\n");
+		if (rv >= 0)
+			goto end;
+		}
+	else
+		{	
+		rv = do_keyop(ctx, pkey_op, NULL, (size_t *)&buf_outlen,
+			      buf_in, (size_t)buf_inlen);
+		if (rv > 0)
+			{
+			buf_out = OPENSSL_malloc(buf_outlen);
+			if (!buf_out)
+				rv = -1;
+			else
+				rv = do_keyop(ctx, pkey_op,
+						buf_out, (size_t *)&buf_outlen,
+						buf_in, (size_t)buf_inlen);
+			}
+		}
+
+	if(rv <= 0)
+		{
+		BIO_printf(bio_err, "Public Key operation error\n");
+		ERR_print_errors(bio_err);
+		goto end;
+		}
+	ret = 0;
+	if(asn1parse)
+		{
+		if(!ASN1_parse_dump(out, buf_out, buf_outlen, 1, -1))
+			ERR_print_errors(bio_err);
+		}
+	else if(hexdump)
+		BIO_dump(out, (char *)buf_out, buf_outlen);
+	else
+		BIO_write(out, buf_out, buf_outlen);
+
+	end:
+	if (ctx)
+		EVP_PKEY_CTX_free(ctx);
+	BIO_free(in);
+	BIO_free_all(out);
+	if (buf_in)
+		OPENSSL_free(buf_in);
+	if (buf_out)
+		OPENSSL_free(buf_out);
+	if (sig)
+		OPENSSL_free(sig);
+	return ret;
+}
+
+static void usage()
+{
+	BIO_printf(bio_err, "Usage: pkeyutl [options]\n");
+	BIO_printf(bio_err, "-in file        input file\n");
+	BIO_printf(bio_err, "-out file       output file\n");
+	BIO_printf(bio_err, "-sigfile file signature file (verify operation only)\n");
+	BIO_printf(bio_err, "-inkey file     input key\n");
+	BIO_printf(bio_err, "-keyform arg    private key format - default PEM\n");
+	BIO_printf(bio_err, "-pubin          input is a public key\n");
+	BIO_printf(bio_err, "-certin         input is a certificate carrying a public key\n");
+	BIO_printf(bio_err, "-pkeyopt X:Y    public key options\n");
+	BIO_printf(bio_err, "-sign           sign with private key\n");
+	BIO_printf(bio_err, "-verify         verify with public key\n");
+	BIO_printf(bio_err, "-verifyrecover  verify with public key, recover original data\n");
+	BIO_printf(bio_err, "-encrypt        encrypt with public key\n");
+	BIO_printf(bio_err, "-decrypt        decrypt with private key\n");
+	BIO_printf(bio_err, "-derive         derive shared secret\n");
+	BIO_printf(bio_err, "-hexdump        hex dump output\n");
+#ifndef OPENSSL_NO_ENGINE
+	BIO_printf(bio_err, "-engine e       use engine e, possibly a hardware device.\n");
+#endif
+	BIO_printf(bio_err, "-passin arg     pass phrase source\n");
+
+}
+
+static EVP_PKEY_CTX *init_ctx(int *pkeysize,
+				char *keyfile, int keyform, int key_type,
+				char *passargin, int pkey_op, ENGINE *e)
+	{
+	EVP_PKEY *pkey = NULL;
+	EVP_PKEY_CTX *ctx = NULL;
+	char *passin = NULL;
+	int rv = -1;
+	X509 *x;
+	if(((pkey_op == EVP_PKEY_OP_SIGN) || (pkey_op == EVP_PKEY_OP_DECRYPT) 
+		|| (pkey_op == EVP_PKEY_OP_DERIVE))
+		&& (key_type != KEY_PRIVKEY))
+		{
+		BIO_printf(bio_err, "A private key is needed for this operation\n");
+		goto end;
+		}
+	if(!app_passwd(bio_err, passargin, NULL, &passin, NULL))
+		{
+		BIO_printf(bio_err, "Error getting password\n");
+		goto end;
+		}
+	switch(key_type)
+		{
+		case KEY_PRIVKEY:
+		pkey = load_key(bio_err, keyfile, keyform, 0,
+			passin, e, "Private Key");
+		break;
+
+		case KEY_PUBKEY:
+		pkey = load_pubkey(bio_err, keyfile, keyform, 0,
+			NULL, e, "Public Key");
+		break;
+
+		case KEY_CERT:
+		x = load_cert(bio_err, keyfile, keyform,
+			NULL, e, "Certificate");
+		if(x)
+			{
+			pkey = X509_get_pubkey(x);
+			X509_free(x);
+			}
+		break;
+
+		}
+
+	*pkeysize = EVP_PKEY_size(pkey);
+
+	if (!pkey)
+		goto end;
+
+	ctx = EVP_PKEY_CTX_new(pkey, e);
+
+	EVP_PKEY_free(pkey);
+
+	if (!ctx)
+		goto end;
+
+	switch(pkey_op)
+		{
+		case EVP_PKEY_OP_SIGN:
+		rv = EVP_PKEY_sign_init(ctx);
+		break;
+
+		case EVP_PKEY_OP_VERIFY:
+		rv = EVP_PKEY_verify_init(ctx);
+		break;
+
+		case EVP_PKEY_OP_VERIFYRECOVER:
+		rv = EVP_PKEY_verify_recover_init(ctx);
+		break;
+
+		case EVP_PKEY_OP_ENCRYPT:
+		rv = EVP_PKEY_encrypt_init(ctx);
+		break;
+
+		case EVP_PKEY_OP_DECRYPT:
+		rv = EVP_PKEY_decrypt_init(ctx);
+		break;
+
+		case EVP_PKEY_OP_DERIVE:
+		rv = EVP_PKEY_derive_init(ctx);
+		break;
+		}
+
+	if (rv <= 0)
+		{
+		EVP_PKEY_CTX_free(ctx);
+		ctx = NULL;
+		}
+
+	end:
+
+	if (passin)
+		OPENSSL_free(passin);
+
+	return ctx;
+
+
+	}
+
+static int setup_peer(BIO *err, EVP_PKEY_CTX *ctx, int peerform,
+							const char *file)
+	{
+	EVP_PKEY *peer = NULL;
+	int ret;
+	if (!ctx)
+		{
+		BIO_puts(err, "-peerkey command before -inkey\n");
+		return 0;
+		}
+		
+	peer = load_pubkey(bio_err, file, peerform, 0, NULL, NULL, "Peer Key");
+
+	if (!peer)
+		{
+		BIO_printf(bio_err, "Error reading peer key %s\n", file);
+		ERR_print_errors(err);
+		return 0;
+		}
+
+	ret = EVP_PKEY_derive_set_peer(ctx, peer);
+
+	EVP_PKEY_free(peer);
+	if (ret <= 0)
+		ERR_print_errors(err);
+	return ret;
+	}
+
+static int do_keyop(EVP_PKEY_CTX *ctx, int pkey_op,
+		unsigned char *out, size_t *poutlen,
+		unsigned char *in, size_t inlen)
+	{
+	int rv = 0;
+	switch(pkey_op)
+		{
+		case EVP_PKEY_OP_VERIFYRECOVER:
+		rv  = EVP_PKEY_verify_recover(ctx, out, poutlen, in, inlen);
+		break;
+
+		case EVP_PKEY_OP_SIGN:
+		rv  = EVP_PKEY_sign(ctx, out, poutlen, in, inlen);
+		break;
+
+		case EVP_PKEY_OP_ENCRYPT:
+		rv  = EVP_PKEY_encrypt(ctx, out, poutlen, in, inlen);
+		break;
+
+		case EVP_PKEY_OP_DECRYPT:
+		rv  = EVP_PKEY_decrypt(ctx, out, poutlen, in, inlen);
+		break; 
+
+		case EVP_PKEY_OP_DERIVE:
+		rv  = EVP_PKEY_derive(ctx, out, poutlen);
+		break;
+
+		}
+	return rv;
+	}

apps/prime.c

@@ -62,6 +62,9 @@ int MAIN(int argc, char **argv)
     {
     int hex=0;
     int checks=20;
+    int generate=0;
+    int bits=0;
+    int safe=0;
     BIGNUM *bn=NULL;
     BIO *bio_out;
 
@@ -77,6 +80,15 @@ int MAIN(int argc, char **argv)
 	{
 	if(!strcmp(*argv,"-hex"))
 	    hex=1;
+	else if(!strcmp(*argv,"-generate"))
+	    generate=1;
+	else if(!strcmp(*argv,"-bits"))
+	    if(--argc < 1)
+		goto bad;
+	    else
+		bits=atoi(*++argv);
+	else if(!strcmp(*argv,"-safe"))
+	    safe=1;
 	else if(!strcmp(*argv,"-checks"))
 	    if(--argc < 1)
 		goto bad;
@@ -91,13 +103,13 @@ int MAIN(int argc, char **argv)
 	++argv;
 	}
 
-    if (argv[0] == NULL)
+    if (argv[0] == NULL && !generate)
 	{
 	BIO_printf(bio_err,"No prime specified\n");
 	goto bad;
 	}
 
-   if ((bio_out=BIO_new(BIO_s_file())) != NULL)
+    if ((bio_out=BIO_new(BIO_s_file())) != NULL)
 	{
 	BIO_set_fp(bio_out,stdout,BIO_NOCLOSE);
 #ifdef OPENSSL_SYS_VMS
@@ -108,14 +120,32 @@ int MAIN(int argc, char **argv)
 #endif
 	}
 
-    if(hex)
-	BN_hex2bn(&bn,argv[0]);
-    else
-	BN_dec2bn(&bn,argv[0]);
+    if(generate)
+	{
+	char *s;
 
-    BN_print(bio_out,bn);
-    BIO_printf(bio_out," is %sprime\n",
-	       BN_is_prime_ex(bn,checks,NULL,NULL) ? "" : "not ");
+	if(!bits)
+	    {
+	    BIO_printf(bio_err,"Specifiy the number of bits.\n");
+	    return 1;
+	    }
+	bn=BN_new();
+	BN_generate_prime_ex(bn,bits,safe,NULL,NULL,NULL);
+	s=hex ? BN_bn2hex(bn) : BN_bn2dec(bn);
+	BIO_printf(bio_out,"%s\n",s);
+	OPENSSL_free(s);
+	}
+    else
+	{
+	if(hex)
+	    BN_hex2bn(&bn,argv[0]);
+	else
+	    BN_dec2bn(&bn,argv[0]);
+
+	BN_print(bio_out,bn);
+	BIO_printf(bio_out," is %sprime\n",
+		   BN_is_prime_ex(bn,checks,NULL,NULL) ? "" : "not ");
+	}
 
     BN_free(bn);
     BIO_free_all(bio_out);

apps/progs.h

@@ -22,34 +22,44 @@ extern int ecparam_main(int argc,char *argv[]);
 extern int x509_main(int argc,char *argv[]);
 extern int genrsa_main(int argc,char *argv[]);
 extern int gendsa_main(int argc,char *argv[]);
+extern int genpkey_main(int argc,char *argv[]);
 extern int s_server_main(int argc,char *argv[]);
 extern int s_client_main(int argc,char *argv[]);
 extern int speed_main(int argc,char *argv[]);
 extern int s_time_main(int argc,char *argv[]);
 extern int version_main(int argc,char *argv[]);
 extern int pkcs7_main(int argc,char *argv[]);
+extern int cms_main(int argc,char *argv[]);
 extern int crl2pkcs7_main(int argc,char *argv[]);
 extern int sess_id_main(int argc,char *argv[]);
 extern int ciphers_main(int argc,char *argv[]);
 extern int nseq_main(int argc,char *argv[]);
 extern int pkcs12_main(int argc,char *argv[]);
 extern int pkcs8_main(int argc,char *argv[]);
+extern int pkey_main(int argc,char *argv[]);
+extern int pkeyparam_main(int argc,char *argv[]);
+extern int pkeyutl_main(int argc,char *argv[]);
 extern int spkac_main(int argc,char *argv[]);
 extern int smime_main(int argc,char *argv[]);
 extern int rand_main(int argc,char *argv[]);
 extern int engine_main(int argc,char *argv[]);
 extern int ocsp_main(int argc,char *argv[]);
 extern int prime_main(int argc,char *argv[]);
+extern int ts_main(int argc,char *argv[]);
 
 #define FUNC_TYPE_GENERAL	1
 #define FUNC_TYPE_MD		2
 #define FUNC_TYPE_CIPHER	3
+#define FUNC_TYPE_PKEY		4
+#define FUNC_TYPE_MD_ALG	5
+#define FUNC_TYPE_CIPHER_ALG	6
 
 typedef struct {
 	int type;
 	const char *name;
 	int (*func)(int argc,char *argv[]);
 	} FUNCTION;
+DECLARE_LHASH_OF(FUNCTION);
 
 FUNCTION functions[] = {
 	{FUNC_TYPE_GENERAL,"verify",verify_main},
@@ -95,6 +105,7 @@ FUNCTION functions[] = {
 #ifndef OPENSSL_NO_DSA
 	{FUNC_TYPE_GENERAL,"gendsa",gendsa_main},
 #endif
+	{FUNC_TYPE_GENERAL,"genpkey",genpkey_main},
 #if !defined(OPENSSL_NO_SOCK) && !(defined(OPENSSL_NO_SSL2) && defined(OPENSSL_NO_SSL3))
 	{FUNC_TYPE_GENERAL,"s_server",s_server_main},
 #endif
@@ -109,6 +120,9 @@ FUNCTION functions[] = {
 #endif
 	{FUNC_TYPE_GENERAL,"version",version_main},
 	{FUNC_TYPE_GENERAL,"pkcs7",pkcs7_main},
+#ifndef OPENSSL_NO_CMS
+	{FUNC_TYPE_GENERAL,"cms",cms_main},
+#endif
 	{FUNC_TYPE_GENERAL,"crl2pkcs7",crl2pkcs7_main},
 	{FUNC_TYPE_GENERAL,"sess_id",sess_id_main},
 #if !defined(OPENSSL_NO_SOCK) && !(defined(OPENSSL_NO_SSL2) && defined(OPENSSL_NO_SSL3))
@@ -119,14 +133,20 @@ FUNCTION functions[] = {
 	{FUNC_TYPE_GENERAL,"pkcs12",pkcs12_main},
 #endif
 	{FUNC_TYPE_GENERAL,"pkcs8",pkcs8_main},
+	{FUNC_TYPE_GENERAL,"pkey",pkey_main},
+	{FUNC_TYPE_GENERAL,"pkeyparam",pkeyparam_main},
+	{FUNC_TYPE_GENERAL,"pkeyutl",pkeyutl_main},
 	{FUNC_TYPE_GENERAL,"spkac",spkac_main},
 	{FUNC_TYPE_GENERAL,"smime",smime_main},
 	{FUNC_TYPE_GENERAL,"rand",rand_main},
 #ifndef OPENSSL_NO_ENGINE
 	{FUNC_TYPE_GENERAL,"engine",engine_main},
 #endif
+#ifndef OPENSSL_NO_OCSP
 	{FUNC_TYPE_GENERAL,"ocsp",ocsp_main},
+#endif
 	{FUNC_TYPE_GENERAL,"prime",prime_main},
+	{FUNC_TYPE_GENERAL,"ts",ts_main},
 #ifndef OPENSSL_NO_MD2
 	{FUNC_TYPE_MD,"md2",dgst_main},
 #endif
@@ -185,6 +205,9 @@ FUNCTION functions[] = {
 	{FUNC_TYPE_CIPHER,"camellia-256-ecb",enc_main},
 #endif
 	{FUNC_TYPE_CIPHER,"base64",enc_main},
+#ifdef ZLIB
+	{FUNC_TYPE_CIPHER,"zlib",enc_main},
+#endif
 #ifndef OPENSSL_NO_DES
 	{FUNC_TYPE_CIPHER,"des",enc_main},
 #endif

apps/progs.pl

@@ -13,12 +13,16 @@ print <<'EOF';
 #define FUNC_TYPE_GENERAL	1
 #define FUNC_TYPE_MD		2
 #define FUNC_TYPE_CIPHER	3
+#define FUNC_TYPE_PKEY		4
+#define FUNC_TYPE_MD_ALG	5
+#define FUNC_TYPE_CIPHER_ALG	6
 
 typedef struct {
 	int type;
 	const char *name;
 	int (*func)(int argc,char *argv[]);
 	} FUNCTION;
+DECLARE_LHASH_OF(FUNCTION);
 
 FUNCTION functions[] = {
 EOF
@@ -43,6 +47,10 @@ foreach (@ARGV)
 		{ print "#ifndef OPENSSL_NO_DH\n${str}#endif\n"; }
 	elsif ( ($_ =~ /^pkcs12$/))
 		{ print "#if !defined(OPENSSL_NO_DES) && !defined(OPENSSL_NO_SHA1)\n${str}#endif\n"; }
+	elsif ( ($_ =~ /^cms$/))
+		{ print "#ifndef OPENSSL_NO_CMS\n${str}#endif\n"; }
+	elsif ( ($_ =~ /^ocsp$/))
+		{ print "#ifndef OPENSSL_NO_OCSP\n${str}#endif\n"; }
 	else
 		{ print $str; }
 	}
@@ -60,7 +68,7 @@ foreach (
 	"camellia-128-cbc", "camellia-128-ecb",
 	"camellia-192-cbc", "camellia-192-ecb",
 	"camellia-256-cbc", "camellia-256-ecb",
-	"base64",
+	"base64", "zlib",
 	"des", "des3", "desx", "idea", "seed", "rc4", "rc4-40",
 	"rc2", "bf", "cast", "rc5",
 	"des-ecb", "des-ede",    "des-ede3",
@@ -87,6 +95,7 @@ foreach (
 	elsif ($_ =~ /bf/)   { $t="#ifndef OPENSSL_NO_BF\n${t}#endif\n"; }
 	elsif ($_ =~ /cast/) { $t="#ifndef OPENSSL_NO_CAST\n${t}#endif\n"; }
 	elsif ($_ =~ /rc5/)  { $t="#ifndef OPENSSL_NO_RC5\n${t}#endif\n"; }
+	elsif ($_ =~ /zlib/)  { $t="#ifdef ZLIB\n${t}#endif\n"; }
 	print $t;
 	}
 

apps/rand.c

@@ -68,7 +68,8 @@
 
 /* -out file         - write to file
  * -rand file:file   - PRNG seed files
- * -base64           - encode output
+ * -base64           - base64 encode output
+ * -hex              - hex encode output
  * num               - write 'num' bytes
  */
 
@@ -84,6 +85,7 @@ int MAIN(int argc, char **argv)
 	char *outfile = NULL;
 	char *inrand = NULL;
 	int base64 = 0;
+	int hex = 0;
 	BIO *out = NULL;
 	int num = -1;
 #ifndef OPENSSL_NO_ENGINE
@@ -133,6 +135,13 @@ int MAIN(int argc, char **argv)
 			else
 				badopt = 1;
 			}
+		else if (strcmp(argv[i], "-hex") == 0)
+			{
+			if (!hex)
+				hex = 1;
+			else
+				badopt = 1;
+			}
 		else if (isdigit((unsigned char)argv[i][0]))
 			{
 			if (num < 0)
@@ -148,6 +157,9 @@ int MAIN(int argc, char **argv)
 			badopt = 1;
 		}
 
+	if (hex && base64)
+		badopt = 1;
+
 	if (num < 0)
 		badopt = 1;
 	
@@ -160,7 +172,8 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err, "-engine e             - use engine e, possibly a hardware device.\n");
 #endif
 		BIO_printf(bio_err, "-rand file%cfile%c... - seed PRNG from files\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
-		BIO_printf(bio_err, "-base64               - encode output\n");
+		BIO_printf(bio_err, "-base64               - base64 encode output\n");
+		BIO_printf(bio_err, "-hex                  - hex encode output\n");
 		goto err;
 		}
 
@@ -210,9 +223,17 @@ int MAIN(int argc, char **argv)
 		r = RAND_bytes(buf, chunk);
 		if (r <= 0)
 			goto err;
-		BIO_write(out, buf, chunk);
+		if (!hex) 
+			BIO_write(out, buf, chunk);
+		else
+			{
+			for (i = 0; i < chunk; i++)
+				BIO_printf(out, "%02x", buf[i]);
+			}
 		num -= chunk;
 		}
+	if (hex)
+		BIO_puts(out, "\n");
 	(void)BIO_flush(out);
 
 	app_RAND_write_file(NULL, bio_err);

apps/req.c

@@ -141,39 +141,33 @@ static int add_attribute_object(X509_REQ *req, char *text, const char *def,
 				int n_max, unsigned long chtype);
 static int add_DN_object(X509_NAME *n, char *text, const char *def, char *value,
 	int nid,int n_min,int n_max, unsigned long chtype, int mval);
-#ifndef OPENSSL_NO_RSA
-static int MS_CALLBACK req_cb(int p, int n, BN_GENCB *cb);
-#endif
+static int genpkey_cb(EVP_PKEY_CTX *ctx);
 static int req_check_len(int len,int n_min,int n_max);
 static int check_end(const char *str, const char *end);
+static EVP_PKEY_CTX *set_keygen_ctx(BIO *err, const char *gstr, int *pkey_type,
+					long *pkeylen, char **palgnam,
+					ENGINE *keygen_engine);
 #ifndef MONOLITH
 static char *default_config_file=NULL;
 #endif
 static CONF *req_conf=NULL;
 static int batch=0;
 
-#define TYPE_RSA	1
-#define TYPE_DSA	2
-#define TYPE_DH		3
-#define TYPE_EC		4
-
 int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-	ENGINE *e = NULL;
-#ifndef OPENSSL_NO_DSA
-	DSA *dsa_params=NULL;
-#endif
-#ifndef OPENSSL_NO_ECDSA
-	EC_KEY *ec_params = NULL;
-#endif
+	ENGINE *e = NULL, *gen_eng = NULL;
 	unsigned long nmflag = 0, reqflag = 0;
 	int ex=1,x509=0,days=30;
 	X509 *x509ss=NULL;
 	X509_REQ *req=NULL;
+	EVP_PKEY_CTX *genctx = NULL;
+	const char *keyalg = NULL;
+	char *keyalgstr = NULL;
+	STACK_OF(OPENSSL_STRING) *pkeyopts = NULL;
 	EVP_PKEY *pkey=NULL;
-	int i=0,badops=0,newreq=0,verbose=0,pkey_type=TYPE_RSA;
+	int i=0,badops=0,newreq=0,verbose=0,pkey_type=-1;
 	long newkey = -1;
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat,verify=0,noout=0,text=0,keyform=FORMAT_PEM;
@@ -193,7 +187,7 @@ int MAIN(int argc, char **argv)
 	char *p;
 	char *subj = NULL;
 	int multirdn = 0;
-	const EVP_MD *md_alg=NULL,*digest=EVP_sha1();
+	const EVP_MD *md_alg=NULL,*digest=NULL;
 	unsigned long chtype = MBSTRING_ASC;
 #ifndef MONOLITH
 	char *to_free;
@@ -236,6 +230,16 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+		else if (strcmp(*argv,"-keygen_engine") == 0)
+			{
+			if (--argc < 1) goto bad;
+			gen_eng = ENGINE_by_id(*(++argv));
+			if (gen_eng == NULL)
+				{
+				BIO_printf(bio_err, "Can't find keygen engine %s\n", *argv);
+				goto end;
+				}
+			}
 #endif
 		else if (strcmp(*argv,"-key") == 0)
 			{
@@ -292,126 +296,20 @@ int MAIN(int argc, char **argv)
 			}
 		else if (strcmp(*argv,"-newkey") == 0)
 			{
-			int is_numeric;
-
-			if (--argc < 1) goto bad;
-			p= *(++argv);
-			is_numeric = p[0] >= '0' && p[0] <= '9';
-			if (strncmp("rsa:",p,4) == 0 || is_numeric)
-				{
-				pkey_type=TYPE_RSA;
-				if(!is_numeric)
-				    p+=4;
-				newkey= atoi(p);
-				}
-			else
-#ifndef OPENSSL_NO_DSA
-				if (strncmp("dsa:",p,4) == 0)
-				{
-				X509 *xtmp=NULL;
-				EVP_PKEY *dtmp;
-
-				pkey_type=TYPE_DSA;
-				p+=4;
-				if ((in=BIO_new_file(p,"r")) == NULL)
-					{
-					perror(p);
-					goto end;
-					}
-				if ((dsa_params=PEM_read_bio_DSAparams(in,NULL,NULL,NULL)) == NULL)
-					{
-					ERR_clear_error();
-					(void)BIO_reset(in);
-					if ((xtmp=PEM_read_bio_X509(in,NULL,NULL,NULL)) == NULL)
-						{
-						BIO_printf(bio_err,"unable to load DSA parameters from file\n");
-						goto end;
-						}
-
-					if ((dtmp=X509_get_pubkey(xtmp)) == NULL) goto end;
-					if (dtmp->type == EVP_PKEY_DSA)
-						dsa_params=DSAparams_dup(dtmp->pkey.dsa);
-					EVP_PKEY_free(dtmp);
-					X509_free(xtmp);
-					if (dsa_params == NULL)
-						{
-						BIO_printf(bio_err,"Certificate does not contain DSA parameters\n");
-						goto end;
-						}
-					}
-				BIO_free(in);
-				in=NULL;
-				newkey=BN_num_bits(dsa_params->p);
-				}
-			else 
-#endif
-#ifndef OPENSSL_NO_ECDSA
-				if (strncmp("ec:",p,3) == 0)
-				{
-				X509 *xtmp=NULL;
-				EVP_PKEY *dtmp;
-				EC_GROUP *group;
-
-				pkey_type=TYPE_EC;
-				p+=3;
-				if ((in=BIO_new_file(p,"r")) == NULL)
-					{
-					perror(p);
-					goto end;
-					}
-				if ((ec_params = EC_KEY_new()) == NULL)
-					goto end;
-				group = PEM_read_bio_ECPKParameters(in, NULL, NULL, NULL);
-				if (group == NULL)
-					{
-					EC_KEY_free(ec_params);
-					ERR_clear_error();
-					(void)BIO_reset(in);
-					if ((xtmp=PEM_read_bio_X509(in,NULL,NULL,NULL)) == NULL)
-						{	
-						BIO_printf(bio_err,"unable to load EC parameters from file\n");
-						goto end;
-						}
-
-					if ((dtmp=X509_get_pubkey(xtmp))==NULL)
-						goto end;
-					if (dtmp->type == EVP_PKEY_EC)
-						ec_params = EC_KEY_dup(dtmp->pkey.ec);
-					EVP_PKEY_free(dtmp);
-					X509_free(xtmp);
-					if (ec_params == NULL)
-						{
-						BIO_printf(bio_err,"Certificate does not contain EC parameters\n");
-						goto end;
-						}
-					}
-				else
-					{
-					if (EC_KEY_set_group(ec_params, group) == 0)
-						goto end;
-					EC_GROUP_free(group);
-					}
-
-				BIO_free(in);
-				in=NULL;
-				newkey = EC_GROUP_get_degree(EC_KEY_get0_group(ec_params));
-				}
-			else
-#endif
-#ifndef OPENSSL_NO_DH
-				if (strncmp("dh:",p,4) == 0)
-				{
-				pkey_type=TYPE_DH;
-				p+=3;
-				}
-			else
-#endif
-				{
+			if (--argc < 1)
 				goto bad;
-				}
-
+			keyalg = *(++argv);
 			newreq=1;
 			}
+		else if (strcmp(*argv,"-pkeyopt") == 0)
+			{
+			if (--argc < 1)
+				goto bad;
+			if (!pkeyopts)
+				pkeyopts = sk_OPENSSL_STRING_new_null();
+			if (!pkeyopts || !sk_OPENSSL_STRING_push(pkeyopts, *(++argv)))
+				goto bad;
+			}
 		else if (strcmp(*argv,"-batch") == 0)
 			batch=1;
 		else if (strcmp(*argv,"-newhdr") == 0)
@@ -467,11 +365,6 @@ int MAIN(int argc, char **argv)
 			serial = s2i_ASN1_INTEGER(NULL, *(++argv));
 			if (!serial) goto bad;
 			}
-		else if ((md_alg=EVP_get_digestbyname(&((*argv)[1]))) != NULL)
-			{
-			/* ok */
-			digest=md_alg;
-			}
 		else if (strcmp(*argv,"-extensions") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -482,6 +375,11 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			req_exts = *(++argv);
 			}
+		else if ((md_alg=EVP_get_digestbyname(&((*argv)[1]))) != NULL)
+			{
+			/* ok */
+			digest=md_alg;
+			}
 		else
 			{
 			BIO_printf(bio_err,"unknown option %s\n",*argv);
@@ -719,8 +617,7 @@ bad:
 			   message */
 			goto end;
 			}
-		if (EVP_PKEY_type(pkey->type) == EVP_PKEY_DSA || 
-			EVP_PKEY_type(pkey->type) == EVP_PKEY_EC)
+		else
 			{
 			char *randfile = NCONF_get_string(req_conf,SECTION,"RANDFILE");
 			if (randfile == NULL)
@@ -731,15 +628,20 @@ bad:
 
 	if (newreq && (pkey == NULL))
 		{
-#ifndef OPENSSL_NO_RSA
-		BN_GENCB cb;
-#endif
 		char *randfile = NCONF_get_string(req_conf,SECTION,"RANDFILE");
 		if (randfile == NULL)
 			ERR_clear_error();
 		app_RAND_load_file(randfile, bio_err, 0);
 		if (inrand)
 			app_RAND_load_files(inrand);
+
+		if (keyalg)
+			{
+			genctx = set_keygen_ctx(bio_err, keyalg, &pkey_type, &newkey,
+							&keyalgstr, gen_eng);
+			if (!genctx)
+				goto end;
+			}
 	
 		if (newkey <= 0)
 			{
@@ -747,58 +649,55 @@ bad:
 				newkey=DEFAULT_KEY_LENGTH;
 			}
 
-		if (newkey < MIN_KEY_LENGTH && (pkey_type == TYPE_RSA || pkey_type == TYPE_DSA))
+		if (newkey < MIN_KEY_LENGTH && (pkey_type == EVP_PKEY_RSA || pkey_type == EVP_PKEY_DSA))
 			{
 			BIO_printf(bio_err,"private key length is too short,\n");
 			BIO_printf(bio_err,"it needs to be at least %d bits, not %ld\n",MIN_KEY_LENGTH,newkey);
 			goto end;
 			}
-		BIO_printf(bio_err,"Generating a %ld bit %s private key\n",
-			newkey,(pkey_type == TYPE_RSA)?"RSA":
-			(pkey_type == TYPE_DSA)?"DSA":"EC");
 
-		if ((pkey=EVP_PKEY_new()) == NULL) goto end;
-
-#ifndef OPENSSL_NO_RSA
-		BN_GENCB_set(&cb, req_cb, bio_err);
-		if (pkey_type == TYPE_RSA)
+		if (!genctx)
 			{
-			RSA *rsa = RSA_new();
-			BIGNUM *bn = BN_new();
-			if(!bn || !rsa || !BN_set_word(bn, 0x10001) ||
-					!RSA_generate_key_ex(rsa, newkey, bn, &cb) ||
-					!EVP_PKEY_assign_RSA(pkey, rsa))
+			genctx = set_keygen_ctx(bio_err, NULL, &pkey_type, &newkey,
+							&keyalgstr, gen_eng);
+			if (!genctx)
+				goto end;
+			}
+
+		if (pkeyopts)
+			{
+			char *genopt;
+			for (i = 0; i < sk_OPENSSL_STRING_num(pkeyopts); i++)
 				{
-				if(bn) BN_free(bn);
-				if(rsa) RSA_free(rsa);
-				goto end;
+				genopt = sk_OPENSSL_STRING_value(pkeyopts, i);
+				if (pkey_ctrl_string(genctx, genopt) <= 0)
+					{
+					BIO_printf(bio_err,
+						"parameter error \"%s\"\n",
+						genopt);
+					ERR_print_errors(bio_err);
+					goto end;
+					}
 				}
-			BN_free(bn);
 			}
-		else
-#endif
-#ifndef OPENSSL_NO_DSA
-			if (pkey_type == TYPE_DSA)
+
+		BIO_printf(bio_err,"Generating a %ld bit %s private key\n",
+				newkey, keyalgstr);
+
+		EVP_PKEY_CTX_set_cb(genctx, genpkey_cb);
+		EVP_PKEY_CTX_set_app_data(genctx, bio_err);
+
+		if (EVP_PKEY_keygen(genctx, &pkey) <= 0)
 			{
-			if (!DSA_generate_key(dsa_params)) goto end;
-			if (!EVP_PKEY_assign_DSA(pkey,dsa_params)) goto end;
-			dsa_params=NULL;
+			BIO_puts(bio_err, "Error Generating Key\n");
+			goto end;
 			}
-#endif
-#ifndef OPENSSL_NO_ECDSA
-			if (pkey_type == TYPE_EC)
-			{
-			if (!EC_KEY_generate_key(ec_params)) goto end;
-			if (!EVP_PKEY_assign_EC_KEY(pkey, ec_params)) 
-				goto end;
-			ec_params = NULL;
-			}
-#endif
+
+		EVP_PKEY_CTX_free(genctx);
+		genctx = NULL;
 
 		app_RAND_write_file(randfile, bio_err);
 
-		if (pkey == NULL) goto end;
-
 		if (keyout == NULL)
 			{
 			keyout=NCONF_get_string(req_conf,SECTION,KEYFILE);
@@ -896,14 +795,7 @@ loop:
 			BIO_printf(bio_err,"you need to specify a private key\n");
 			goto end;
 			}
-#ifndef OPENSSL_NO_DSA
-		if (pkey->type == EVP_PKEY_DSA)
-			digest=EVP_dss1();
-#endif
-#ifndef OPENSSL_NO_ECDSA
-		if (pkey->type == EVP_PKEY_EC)
-			digest=EVP_ecdsa();
-#endif
+
 		if (req == NULL)
 			{
 			req=X509_REQ_new();
@@ -946,7 +838,7 @@ loop:
 
 			if (!X509_set_issuer_name(x509ss, X509_REQ_get_subject_name(req))) goto end;
 			if (!X509_gmtime_adj(X509_get_notBefore(x509ss),0)) goto end;
-			if (!X509_gmtime_adj(X509_get_notAfter(x509ss), (long)60*60*24*days)) goto end;
+			if (!X509_time_adj_ex(X509_get_notAfter(x509ss), days, 0, NULL)) goto end;
 			if (!X509_set_subject_name(x509ss, X509_REQ_get_subject_name(req))) goto end;
 			tmppkey = X509_REQ_get_pubkey(req);
 			if (!tmppkey || !X509_set_pubkey(x509ss,tmppkey)) goto end;
@@ -968,7 +860,10 @@ loop:
 				}
 			
 			if (!(i=X509_sign(x509ss,pkey,digest)))
+				{
+				ERR_print_errors(bio_err);
 				goto end;
+				}
 			}
 		else
 			{
@@ -989,7 +884,10 @@ loop:
 				goto end;
 				}
 			if (!(i=X509_REQ_sign(req,pkey,digest)))
+				{
+				ERR_print_errors(bio_err);
 				goto end;
+				}
 			}
 		}
 
@@ -1126,7 +1024,7 @@ loop:
 			}
 		fprintf(stdout,"Modulus=");
 #ifndef OPENSSL_NO_RSA
-		if (tpubkey->type == EVP_PKEY_RSA)
+		if (EVP_PKEY_base_id(tpubkey) == EVP_PKEY_RSA)
 			BN_print(out,tpubkey->pkey.rsa->n);
 		else
 #endif
@@ -1182,18 +1080,22 @@ end:
 	BIO_free(in);
 	BIO_free_all(out);
 	EVP_PKEY_free(pkey);
+	if (genctx)
+		EVP_PKEY_CTX_free(genctx);
+	if (pkeyopts)
+		sk_OPENSSL_STRING_free(pkeyopts);
+#ifndef OPENSSL_NO_ENGINE
+	if (gen_eng)
+		ENGINE_free(gen_eng);
+#endif
+	if (keyalgstr)
+		OPENSSL_free(keyalgstr);
 	X509_REQ_free(req);
 	X509_free(x509ss);
 	ASN1_INTEGER_free(serial);
 	if(passargin && passin) OPENSSL_free(passin);
 	if(passargout && passout) OPENSSL_free(passout);
 	OBJ_cleanup();
-#ifndef OPENSSL_NO_DSA
-	if (dsa_params != NULL) DSA_free(dsa_params);
-#endif
-#ifndef OPENSSL_NO_ECDSA
-	if (ec_params != NULL) EC_KEY_free(ec_params);
-#endif
 	apps_shutdown();
 	OPENSSL_EXIT(ex);
 	}
@@ -1539,7 +1441,8 @@ start:
 		buf[0]='\0';
 		if (!batch)
 			{
-			fgets(buf,sizeof buf,stdin);
+			if (!fgets(buf,sizeof buf,stdin))
+				return 0;
 			}
 		else
 			{
@@ -1597,7 +1500,8 @@ start:
 		buf[0]='\0';
 		if (!batch)
 			{
-			fgets(buf,sizeof buf,stdin);
+			if (!fgets(buf,sizeof buf,stdin))
+				return 0;
 			}
 		else
 			{
@@ -1640,24 +1544,6 @@ err:
 	return(0);
 	}
 
-#ifndef OPENSSL_NO_RSA
-static int MS_CALLBACK req_cb(int p, int n, BN_GENCB *cb)
-	{
-	char c='*';
-
-	if (p == 0) c='.';
-	if (p == 1) c='+';
-	if (p == 2) c='*';
-	if (p == 3) c='\n';
-	BIO_write(cb->arg,&c,1);
-	(void)BIO_flush(cb->arg);
-#ifdef LINT
-	p=n;
-#endif
-	return 1;
-	}
-#endif
-
 static int req_check_len(int len, int n_min, int n_max)
 	{
 	if ((n_min > 0) && (len < n_min))
@@ -1684,3 +1570,183 @@ static int check_end(const char *str, const char *end)
 	tmp = str + slen - elen;
 	return strcmp(tmp, end);
 }
+
+static EVP_PKEY_CTX *set_keygen_ctx(BIO *err, const char *gstr, int *pkey_type,
+					long *pkeylen, char **palgnam,
+					ENGINE *keygen_engine)
+	{
+	EVP_PKEY_CTX *gctx = NULL;
+	EVP_PKEY *param = NULL;
+	long keylen = -1;
+	BIO *pbio = NULL;
+	const char *paramfile = NULL;
+
+	if (gstr == NULL)
+		{
+		*pkey_type = EVP_PKEY_RSA;
+		keylen = *pkeylen;
+		}
+	else if (gstr[0] >= '0' && gstr[0] <= '9')
+		{
+		*pkey_type = EVP_PKEY_RSA;
+		keylen = atol(gstr);
+		*pkeylen = keylen;
+		}
+	else if (!strncmp(gstr, "param:", 6))
+		paramfile = gstr + 6;
+	else
+		{
+		const char *p = strchr(gstr, ':');
+		int len;
+		ENGINE *tmpeng;
+		const EVP_PKEY_ASN1_METHOD *ameth;
+
+		if (p)
+			len = p - gstr;
+		else
+			len = strlen(gstr);
+		/* The lookup of a the string will cover all engines so
+		 * keep a note of the implementation.
+		 */
+
+		ameth = EVP_PKEY_asn1_find_str(&tmpeng, gstr, len);
+
+		if (!ameth)
+			{
+			BIO_printf(err, "Unknown algorithm %.*s\n", len, gstr);
+			return NULL;
+			}
+
+		EVP_PKEY_asn1_get0_info(NULL, pkey_type, NULL, NULL, NULL,
+									ameth);
+#ifndef OPENSSL_NO_ENGINE
+		if (tmpeng)
+			ENGINE_finish(tmpeng);
+#endif
+		if (*pkey_type == EVP_PKEY_RSA)
+			{
+			if (p)
+				{
+				keylen = atol(p + 1);
+				*pkeylen = keylen;
+				}
+			}
+		else if (p)
+			paramfile = p + 1;
+		}
+
+	if (paramfile)
+		{
+		pbio = BIO_new_file(paramfile, "r");
+		if (!pbio)
+			{
+			BIO_printf(err, "Can't open parameter file %s\n",
+					paramfile);
+			return NULL;
+			}
+		param = PEM_read_bio_Parameters(pbio, NULL);
+
+		if (!param)
+			{
+			X509 *x;
+			(void)BIO_reset(pbio);
+			x = PEM_read_bio_X509(pbio, NULL, NULL, NULL);
+			if (x)
+				{
+				param = X509_get_pubkey(x);
+				X509_free(x);
+				}
+			}
+
+		BIO_free(pbio);
+
+		if (!param)
+			{
+			BIO_printf(err, "Error reading parameter file %s\n",
+					paramfile);
+			return NULL;
+			}
+		if (*pkey_type == -1)
+			*pkey_type = EVP_PKEY_id(param);
+		else if (*pkey_type != EVP_PKEY_base_id(param))
+			{
+			BIO_printf(err, "Key Type does not match parameters\n");
+			EVP_PKEY_free(param);
+			return NULL;
+			}
+		}
+
+	if (palgnam)
+		{
+		const EVP_PKEY_ASN1_METHOD *ameth;
+		ENGINE *tmpeng;
+		const char *anam;
+		ameth = EVP_PKEY_asn1_find(&tmpeng, *pkey_type);
+		if (!ameth)
+			{
+			BIO_puts(err, "Internal error: can't find key algorithm\n");
+			return NULL;
+			}
+		EVP_PKEY_asn1_get0_info(NULL, NULL, NULL, NULL, &anam, ameth);
+		*palgnam = BUF_strdup(anam);
+#ifndef OPENSSL_NO_ENGINE
+		if (tmpeng)
+			ENGINE_finish(tmpeng);
+#endif
+		}
+
+	if (param)
+		{
+		gctx = EVP_PKEY_CTX_new(param, keygen_engine);
+		*pkeylen = EVP_PKEY_bits(param);
+		EVP_PKEY_free(param);
+		}
+	else
+		gctx = EVP_PKEY_CTX_new_id(*pkey_type, keygen_engine);
+
+	if (!gctx)
+		{
+		BIO_puts(err, "Error allocating keygen context\n");
+		ERR_print_errors(err);
+		return NULL;
+		}
+
+	if (EVP_PKEY_keygen_init(gctx) <= 0)
+		{
+		BIO_puts(err, "Error initializing keygen context\n");
+		ERR_print_errors(err);
+		return NULL;
+		}
+#ifndef OPENSSL_NO_RSA
+	if ((*pkey_type == EVP_PKEY_RSA) && (keylen != -1))
+		{
+		if (EVP_PKEY_CTX_set_rsa_keygen_bits(gctx, keylen) <= 0)
+			{
+			BIO_puts(err, "Error setting RSA keysize\n");
+			ERR_print_errors(err);
+			EVP_PKEY_CTX_free(gctx);
+			return NULL;
+			}
+		}
+#endif
+
+	return gctx;
+	}
+
+static int genpkey_cb(EVP_PKEY_CTX *ctx)
+	{
+	char c='*';
+	BIO *b = EVP_PKEY_CTX_get_app_data(ctx);
+	int p;
+	p = EVP_PKEY_CTX_get_keygen_info(ctx, 0);
+	if (p == 0) c='.';
+	if (p == 1) c='+';
+	if (p == 2) c='*';
+	if (p == 3) c='\n';
+	BIO_write(b,&c,1);
+	(void)BIO_flush(b);
+#ifdef LINT
+	p=n;
+#endif
+	return 1;
+	}

apps/rsa.c

@@ -115,6 +115,8 @@ int MAIN(int argc, char **argv)
 #endif
 	int modulus=0;
 
+	int pvk_encr = 2;
+
 	apps_startup();
 
 	if (bio_err == NULL)
@@ -177,6 +179,16 @@ int MAIN(int argc, char **argv)
 			pubin=1;
 		else if (strcmp(*argv,"-pubout") == 0)
 			pubout=1;
+		else if (strcmp(*argv,"-RSAPublicKey_in") == 0)
+			pubin = 2;
+		else if (strcmp(*argv,"-RSAPublicKey_out") == 0)
+			pubout = 2;
+		else if (strcmp(*argv,"-pvk-strong") == 0)
+			pvk_encr=2;
+		else if (strcmp(*argv,"-pvk-weak") == 0)
+			pvk_encr=1;
+		else if (strcmp(*argv,"-pvk-none") == 0)
+			pvk_encr=0;
 		else if (strcmp(*argv,"-noout") == 0)
 			noout=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -257,10 +269,23 @@ bad:
 		EVP_PKEY	*pkey;
 
 		if (pubin)
-			pkey = load_pubkey(bio_err, infile,
-				(informat == FORMAT_NETSCAPE && sgckey ?
-					FORMAT_IISSGC : informat), 1,
+			{
+			int tmpformat=-1;
+			if (pubin == 2)
+				{
+				if (informat == FORMAT_PEM)
+					tmpformat = FORMAT_PEMRSA;
+				else if (informat == FORMAT_ASN1)
+					tmpformat = FORMAT_ASN1RSA;
+				}
+			else if (informat == FORMAT_NETSCAPE && sgckey)
+				tmpformat = FORMAT_IISSGC;
+			else
+				tmpformat = informat;
+					
+			pkey = load_pubkey(bio_err, infile, tmpformat, 1,
 				passin, e, "Public Key");
+			}
 		else
 			pkey = load_key(bio_err, infile,
 				(informat == FORMAT_NETSCAPE && sgckey ?
@@ -268,7 +293,7 @@ bad:
 				passin, e, "Private Key");
 
 		if (pkey != NULL)
-		rsa = pkey == NULL ? NULL : EVP_PKEY_get1_RSA(pkey);
+			rsa = EVP_PKEY_get1_RSA(pkey);
 		EVP_PKEY_free(pkey);
 	}
 
@@ -346,7 +371,13 @@ bad:
 		}
 	BIO_printf(bio_err,"writing RSA key\n");
 	if 	(outformat == FORMAT_ASN1) {
-		if(pubout || pubin) i=i2d_RSA_PUBKEY_bio(out,rsa);
+		if(pubout || pubin) 
+			{
+			if (pubout == 2)
+				i=i2d_RSAPublicKey_bio(out,rsa);
+			else
+				i=i2d_RSA_PUBKEY_bio(out,rsa);
+			}
 		else i=i2d_RSAPrivateKey_bio(out,rsa);
 	}
 #ifndef OPENSSL_NO_RC4
@@ -370,14 +401,32 @@ bad:
 #endif
 	else if (outformat == FORMAT_PEM) {
 		if(pubout || pubin)
-		    i=PEM_write_bio_RSA_PUBKEY(out,rsa);
+			{
+			if (pubout == 2)
+		    		i=PEM_write_bio_RSAPublicKey(out,rsa);
+			else
+		    		i=PEM_write_bio_RSA_PUBKEY(out,rsa);
+			}
 		else i=PEM_write_bio_RSAPrivateKey(out,rsa,
 						enc,NULL,0,NULL,passout);
+#ifndef OPENSSL_NO_DSA
+	} else if (outformat == FORMAT_MSBLOB || outformat == FORMAT_PVK) {
+		EVP_PKEY *pk;
+		pk = EVP_PKEY_new();
+		EVP_PKEY_set1_RSA(pk, rsa);
+		if (outformat == FORMAT_PVK)
+			i = i2b_PVK_bio(out, pk, pvk_encr, 0, passout);
+		else if (pubin || pubout)
+			i = i2b_PublicKey_bio(out, pk);
+		else
+			i = i2b_PrivateKey_bio(out, pk);
+		EVP_PKEY_free(pk);
+#endif
 	} else	{
 		BIO_printf(bio_err,"bad output format specified for outfile\n");
 		goto end;
 		}
-	if (!i)
+	if (i <= 0)
 		{
 		BIO_printf(bio_err,"unable to write key\n");
 		ERR_print_errors(bio_err);

apps/rsautl.c

@@ -1,5 +1,5 @@
 /* rsautl.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
+/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
  * project 2000.
  */
 /* ====================================================================
@@ -119,24 +119,36 @@ int MAIN(int argc, char **argv)
 	while(argc >= 1)
 	{
 		if (!strcmp(*argv,"-in")) {
-			if (--argc < 1) badarg = 1;
-                        infile= *(++argv);
+			if (--argc < 1)
+				badarg = 1;
+			else
+				infile= *(++argv);
 		} else if (!strcmp(*argv,"-out")) {
-			if (--argc < 1) badarg = 1;
-			outfile= *(++argv);
+			if (--argc < 1)
+				badarg = 1;
+			else
+				outfile= *(++argv);
 		} else if(!strcmp(*argv, "-inkey")) {
-			if (--argc < 1) badarg = 1;
-			keyfile = *(++argv);
+			if (--argc < 1)
+				badarg = 1;
+			else
+				keyfile = *(++argv);
 		} else if (!strcmp(*argv,"-passin")) {
-			if (--argc < 1) badarg = 1;
-			passargin= *(++argv);
+			if (--argc < 1)
+				badarg = 1;
+			else
+				passargin= *(++argv);
 		} else if (strcmp(*argv,"-keyform") == 0) {
-			if (--argc < 1) badarg = 1;
-			keyform=str2fmt(*(++argv));
+			if (--argc < 1)
+				badarg = 1;
+			else
+				keyform=str2fmt(*(++argv));
 #ifndef OPENSSL_NO_ENGINE
 		} else if(!strcmp(*argv, "-engine")) {
-			if (--argc < 1) badarg = 1;
-			engine = *(++argv);
+			if (--argc < 1)
+				badarg = 1;
+			else
+				engine = *(++argv);
 #endif
 		} else if(!strcmp(*argv, "-pubin")) {
 			key_type = KEY_PUBKEY;
@@ -330,4 +342,10 @@ static void usage()
 
 }
 
+#else /* !OPENSSL_NO_RSA */
+
+# if PEDANTIC
+static void *dummy=&dummy;
+# endif
+
 #endif

apps/s_apps.h

@@ -117,7 +117,7 @@
 #include <conio.h>
 #endif
 
-#ifdef OPENSSL_SYS_MSDOS
+#if defined(OPENSSL_SYS_MSDOS) && !defined(_WIN32)
 #define _kbhit kbhit
 #endif
 
@@ -162,7 +162,7 @@ int extract_port(char *str, short *port_ptr);
 int extract_host_port(char *str,char **host_ptr,unsigned char *ip,short *p);
 
 long MS_CALLBACK bio_dump_callback(BIO *bio, int cmd, const char *argp,
-	int argi, long argl, long ret);
+				   int argi, long argl, long ret);
 
 #ifdef HEADER_SSL_H
 void MS_CALLBACK apps_ssl_info_callback(const SSL *s, int where, int ret);
@@ -171,3 +171,6 @@ void MS_CALLBACK tlsext_cb(SSL *s, int client_server, int type,
 					unsigned char *data, int len,
 					void *arg);
 #endif
+
+int MS_CALLBACK generate_cookie_callback(SSL *ssl, unsigned char *cookie, unsigned int *cookie_len);
+int MS_CALLBACK verify_cookie_callback(SSL *ssl, unsigned char *cookie, unsigned int cookie_len);

apps/s_cb.c

@@ -56,7 +56,7 @@
  * [including the GNU Public Licence.]
  */
 /* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2006 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -117,16 +117,21 @@
 #undef NON_MAIN
 #undef USE_SOCKETS
 #include <openssl/err.h>
+#include <openssl/rand.h>
 #include <openssl/x509.h>
 #include <openssl/ssl.h>
 #include "s_apps.h"
 
+#define	COOKIE_SECRET_LENGTH	16
+
 int verify_depth=0;
 int verify_error=X509_V_OK;
+int verify_return_error=0;
+unsigned char cookie_secret[COOKIE_SECRET_LENGTH];
+int cookie_initialized=0;
 
 int MS_CALLBACK verify_callback(int ok, X509_STORE_CTX *ctx)
 	{
-	char buf[256];
 	X509 *err_cert;
 	int err,depth;
 
@@ -134,15 +139,23 @@ int MS_CALLBACK verify_callback(int ok, X509_STORE_CTX *ctx)
 	err=	X509_STORE_CTX_get_error(ctx);
 	depth=	X509_STORE_CTX_get_error_depth(ctx);
 
-	X509_NAME_oneline(X509_get_subject_name(err_cert),buf,sizeof buf);
-	BIO_printf(bio_err,"depth=%d %s\n",depth,buf);
+	BIO_printf(bio_err,"depth=%d ",depth);
+	if (err_cert)
+		{
+		X509_NAME_print_ex(bio_err, X509_get_subject_name(err_cert),
+					0, XN_FLAG_ONELINE);
+		BIO_puts(bio_err, "\n");
+		}
+	else
+		BIO_puts(bio_err, "<no cert>\n");
 	if (!ok)
 		{
 		BIO_printf(bio_err,"verify error:num=%d:%s\n",err,
 			X509_verify_cert_error_string(err));
 		if (verify_depth >= depth)
 			{
-			ok=1;
+			if (!verify_return_error)
+				ok=1;
 			verify_error=X509_V_OK;
 			}
 		else
@@ -151,25 +164,33 @@ int MS_CALLBACK verify_callback(int ok, X509_STORE_CTX *ctx)
 			verify_error=X509_V_ERR_CERT_CHAIN_TOO_LONG;
 			}
 		}
-	switch (ctx->error)
+	switch (err)
 		{
 	case X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT:
-		X509_NAME_oneline(X509_get_issuer_name(ctx->current_cert),buf,sizeof buf);
-		BIO_printf(bio_err,"issuer= %s\n",buf);
+		BIO_puts(bio_err,"issuer= ");
+		X509_NAME_print_ex(bio_err, X509_get_issuer_name(err_cert),
+					0, XN_FLAG_ONELINE);
+		BIO_puts(bio_err, "\n");
 		break;
 	case X509_V_ERR_CERT_NOT_YET_VALID:
 	case X509_V_ERR_ERROR_IN_CERT_NOT_BEFORE_FIELD:
 		BIO_printf(bio_err,"notBefore=");
-		ASN1_TIME_print(bio_err,X509_get_notBefore(ctx->current_cert));
+		ASN1_TIME_print(bio_err,X509_get_notBefore(err_cert));
 		BIO_printf(bio_err,"\n");
 		break;
 	case X509_V_ERR_CERT_HAS_EXPIRED:
 	case X509_V_ERR_ERROR_IN_CERT_NOT_AFTER_FIELD:
 		BIO_printf(bio_err,"notAfter=");
-		ASN1_TIME_print(bio_err,X509_get_notAfter(ctx->current_cert));
+		ASN1_TIME_print(bio_err,X509_get_notAfter(err_cert));
 		BIO_printf(bio_err,"\n");
 		break;
+	case X509_V_ERR_NO_EXPLICIT_POLICY:
+		policies_print(bio_err, ctx);
+		break;
 		}
+	if (err == X509_V_OK && ok == 2)
+		policies_print(bio_err, ctx);
+
 	BIO_printf(bio_err,"verify return:%d\n",ok);
 	return(ok);
 	}
@@ -258,7 +279,7 @@ int set_cert_key_stuff(SSL_CTX *ctx, X509 *cert, EVP_PKEY *key)
 	}
 
 long MS_CALLBACK bio_dump_callback(BIO *bio, int cmd, const char *argp,
-	int argi, long argl, long ret)
+				   int argi, long argl, long ret)
 	{
 	BIO *out;
 
@@ -267,15 +288,15 @@ long MS_CALLBACK bio_dump_callback(BIO *bio, int cmd, const char *argp,
 
 	if (cmd == (BIO_CB_READ|BIO_CB_RETURN))
 		{
-		BIO_printf(out,"read from %p [%p] (%d bytes => %ld (0x%lX))\n",
- 			(void *)bio,argp,argi,ret,ret);
+		BIO_printf(out,"read from %p [%p] (%lu bytes => %ld (0x%lX))\n",
+ 			(void *)bio,argp,(unsigned long)argi,ret,ret);
 		BIO_dump(out,argp,(int)ret);
 		return(ret);
 		}
 	else if (cmd == (BIO_CB_WRITE|BIO_CB_RETURN))
 		{
-		BIO_printf(out,"write to %p [%p] (%d bytes => %ld (0x%lX))\n",
-			(void *)bio,argp,argi,ret,ret);
+		BIO_printf(out,"write to %p [%p] (%lu bytes => %ld (0x%lX))\n",
+			(void *)bio,argp,(unsigned long)argi,ret,ret);
 		BIO_dump(out,argp,(int)ret);
 		}
 	return(ret);
@@ -336,6 +357,12 @@ void MS_CALLBACK msg_cb(int write_p, int version, int content_type, const void *
 	case TLS1_VERSION:
 		str_version = "TLS 1.0 ";
 		break;
+	case DTLS1_VERSION:
+		str_version = "DTLS 1.0 ";
+		break;
+	case DTLS1_BAD_VER:
+		str_version = "DTLS 1.0 (bad) ";
+		break;
 	default:
 		str_version = "???";
 		}
@@ -401,7 +428,10 @@ void MS_CALLBACK msg_cb(int write_p, int version, int content_type, const void *
 			}
 		}
 
-	if (version == SSL3_VERSION || version == TLS1_VERSION)
+	if (version == SSL3_VERSION ||
+	    version == TLS1_VERSION ||
+	    version == DTLS1_VERSION ||
+	    version == DTLS1_BAD_VER)
 		{
 		switch (content_type)
 			{
@@ -504,6 +534,21 @@ void MS_CALLBACK msg_cb(int write_p, int version, int content_type, const void *
 				case 100:
 					str_details2 = " no_renegotiation";
 					break;
+				case 110:
+					str_details2 = " unsupported_extension";
+					break;
+				case 111:
+					str_details2 = " certificate_unobtainable";
+					break;
+				case 112:
+					str_details2 = " unrecognized_name";
+					break;
+				case 113:
+					str_details2 = " bad_certificate_status_response";
+					break;
+				case 114:
+					str_details2 = " bad_certificate_hash_value";
+					break;
 					}
 				}
 			}
@@ -525,6 +570,9 @@ void MS_CALLBACK msg_cb(int write_p, int version, int content_type, const void *
 				case 2:
 					str_details1 = ", ServerHello";
 					break;
+				case 3:
+					str_details1 = ", HelloVerifyRequest";
+					break;
 				case 11:
 					str_details1 = ", Certificate";
 					break;
@@ -621,6 +669,11 @@ void MS_CALLBACK tlsext_cb(SSL *s, int client_server, int type,
 		extname = "server ticket";
 		break;
 
+#ifdef TLSEXT_TYPE_opaque_prf_input
+		case TLSEXT_TYPE_opaque_prf_input:
+		extname = "opaque PRF input";
+		break;
+#endif
 
 		default:
 		extname = "unknown";
@@ -634,3 +687,188 @@ void MS_CALLBACK tlsext_cb(SSL *s, int client_server, int type,
 	BIO_dump(bio, (char *)data, len);
 	(void)BIO_flush(bio);
 	}
+
+int MS_CALLBACK generate_cookie_callback(SSL *ssl, unsigned char *cookie, unsigned int *cookie_len)
+	{
+	unsigned char *buffer, result[EVP_MAX_MD_SIZE];
+	unsigned int length, resultlength;
+#if OPENSSL_USE_IPV6
+	union {
+		struct sockaddr_storage ss;
+		struct sockaddr_in6 s6;
+		struct sockaddr_in s4;
+	} peer;
+#else
+	struct sockaddr_in peer;
+#endif
+
+	/* Initialize a random secret */
+	if (!cookie_initialized)
+		{
+		if (!RAND_bytes(cookie_secret, COOKIE_SECRET_LENGTH))
+			{
+			BIO_printf(bio_err,"error setting random cookie secret\n");
+			return 0;
+			}
+		cookie_initialized = 1;
+		}
+
+	/* Read peer information */
+	(void)BIO_dgram_get_peer(SSL_get_rbio(ssl), &peer);
+
+	/* Create buffer with peer's address and port */
+#if OPENSSL_USE_IPV6
+	length = 0;
+	switch (peer.ss.ss_family)
+		{
+	case AF_INET:
+		length += sizeof(struct in_addr);
+		length += sizeof(peer.s4.sin_port);
+		break;
+	case AF_INET6:
+		length += sizeof(struct in6_addr);
+		length += sizeof(peer.s6.sin6_port);
+		break;
+	default:
+		OPENSSL_assert(0);
+		break;
+		}
+#else
+	length = sizeof(peer.sin_addr);
+	length += sizeof(peer.sin_port);
+#endif
+	buffer = OPENSSL_malloc(length);
+
+	if (buffer == NULL)
+		{
+		BIO_printf(bio_err,"out of memory\n");
+		return 0;
+		}
+
+#if OPENSSL_USE_IPV6
+	switch (peer.ss.ss_family)
+		{
+	case AF_INET:
+		memcpy(buffer,
+		       &peer.s4.sin_port,
+		       sizeof(peer.s4.sin_port));
+		memcpy(buffer + sizeof(peer.s4.sin_port),
+		       &peer.s4.sin_addr,
+		       sizeof(struct in_addr));
+		break;
+	case AF_INET6:
+		memcpy(buffer,
+		       &peer.s6.sin6_port,
+		       sizeof(peer.s6.sin6_port));
+		memcpy(buffer + sizeof(peer.s6.sin6_port),
+		       &peer.s6.sin6_addr,
+		       sizeof(struct in6_addr));
+		break;
+	default:
+		OPENSSL_assert(0);
+		break;
+		}
+#else
+	memcpy(buffer, &peer.sin_port, sizeof(peer.sin_port));
+	memcpy(buffer + sizeof(peer.sin_port), &peer.sin_addr, sizeof(peer.sin_addr));
+#endif
+
+	/* Calculate HMAC of buffer using the secret */
+	HMAC(EVP_sha1(), cookie_secret, COOKIE_SECRET_LENGTH,
+	     buffer, length, result, &resultlength);
+	OPENSSL_free(buffer);
+
+	memcpy(cookie, result, resultlength);
+	*cookie_len = resultlength;
+
+	return 1;
+	}
+
+int MS_CALLBACK verify_cookie_callback(SSL *ssl, unsigned char *cookie, unsigned int cookie_len)
+	{
+	unsigned char *buffer, result[EVP_MAX_MD_SIZE];
+	unsigned int length, resultlength;
+#if OPENSSL_USE_IPV6
+	union {
+		struct sockaddr_storage ss;
+		struct sockaddr_in6 s6;
+		struct sockaddr_in s4;
+	} peer;
+#else
+	struct sockaddr_in peer;
+#endif
+
+	/* If secret isn't initialized yet, the cookie can't be valid */
+	if (!cookie_initialized)
+		return 0;
+
+	/* Read peer information */
+	(void)BIO_dgram_get_peer(SSL_get_rbio(ssl), &peer);
+
+	/* Create buffer with peer's address and port */
+#if OPENSSL_USE_IPV6
+	length = 0;
+	switch (peer.ss.ss_family)
+		{
+	case AF_INET:
+		length += sizeof(struct in_addr);
+		length += sizeof(peer.s4.sin_port);
+		break;
+	case AF_INET6:
+		length += sizeof(struct in6_addr);
+		length += sizeof(peer.s6.sin6_port);
+		break;
+	default:
+		OPENSSL_assert(0);
+		break;
+		}
+#else
+	length = sizeof(peer.sin_addr);
+	length += sizeof(peer.sin_port);
+#endif
+	buffer = OPENSSL_malloc(length);
+	
+	if (buffer == NULL)
+		{
+		BIO_printf(bio_err,"out of memory\n");
+		return 0;
+		}
+
+#if OPENSSL_USE_IPV6
+	switch (peer.ss.ss_family)
+		{
+	case AF_INET:
+		memcpy(buffer,
+		       &peer.s4.sin_port,
+		       sizeof(peer.s4.sin_port));
+		memcpy(buffer + sizeof(peer.s4.sin_port),
+		       &peer.s4.sin_addr,
+		       sizeof(struct in_addr));
+		break;
+	case AF_INET6:
+		memcpy(buffer,
+		       &peer.s6.sin6_port,
+		       sizeof(peer.s6.sin6_port));
+		memcpy(buffer + sizeof(peer.s6.sin6_port),
+		       &peer.s6.sin6_addr,
+		       sizeof(struct in6_addr));
+		break;
+	default:
+		OPENSSL_assert(0);
+		break;
+		}
+#else
+	memcpy(buffer, &peer.sin_port, sizeof(peer.sin_port));
+	memcpy(buffer + sizeof(peer.sin_port), &peer.sin_addr, sizeof(peer.sin_addr));
+#endif
+
+	/* Calculate HMAC of buffer using the secret */
+	HMAC(EVP_sha1(), cookie_secret, COOKIE_SECRET_LENGTH,
+	     buffer, length, result, &resultlength);
+	OPENSSL_free(buffer);
+
+	if (cookie_len == resultlength && memcmp(result, cookie, resultlength) == 0)
+		return 1;
+
+	return 0;
+	}

apps/s_client.c

@@ -56,7 +56,7 @@
  * [including the GNU Public Licence.]
  */
 /* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2006 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -108,8 +108,35 @@
  * Hudson (tjh@cryptsoft.com).
  *
  */
+/* ====================================================================
+ * Copyright 2005 Nokia. All rights reserved.
+ *
+ * The portions of the attached software ("Contribution") is developed by
+ * Nokia Corporation and is licensed pursuant to the OpenSSL open source
+ * license.
+ *
+ * The Contribution, originally written by Mika Kousa and Pasi Eronen of
+ * Nokia Corporation, consists of the "PSK" (Pre-Shared Key) ciphersuites
+ * support (see RFC 4279) to OpenSSL.
+ *
+ * No patent licenses or other rights except those expressly stated in
+ * the OpenSSL open source license shall be deemed granted or received
+ * expressly, by implication, estoppel, or otherwise.
+ *
+ * No assurances are provided by Nokia that the Contribution does not
+ * infringe the patent or other intellectual property rights of any third
+ * party or that the license provides you with all the necessary rights
+ * to make use of the Contribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IN
+ * ADDITION TO THE DISCLAIMERS INCLUDED IN THE LICENSE, NOKIA
+ * SPECIFICALLY DISCLAIMS ANY LIABILITY FOR CLAIMS BROUGHT BY YOU OR ANY
+ * OTHER ENTITY BASED ON INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OR
+ * OTHERWISE.
+ */
 
 #include <assert.h>
+#include <ctype.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -134,23 +161,20 @@ typedef unsigned int u_int;
 #include <openssl/err.h>
 #include <openssl/pem.h>
 #include <openssl/rand.h>
+#include <openssl/ocsp.h>
+#include <openssl/bn.h>
 #include "s_apps.h"
 #include "timeouts.h"
 
-#ifdef OPENSSL_SYS_WINCE
-/* Windows CE incorrectly defines fileno as returning void*, so to avoid problems below... */
-#ifdef fileno
-#undef fileno
-#endif
-#define fileno(a) (int)_fileno(a)
-#endif
-
-
 #if (defined(OPENSSL_SYS_VMS) && __VMS_VER < 70000000)
 /* FIONBIO used as a switch to enable ioctl, and that isn't in VMS < 7.0 */
 #undef FIONBIO
 #endif
 
+#if defined(OPENSSL_SYS_BEOS_R5)
+#include <fcntl.h>
+#endif
+
 #undef PROG
 #define PROG	s_client_main
 
@@ -165,6 +189,7 @@ typedef unsigned int u_int;
 
 extern int verify_depth;
 extern int verify_error;
+extern int verify_return_error;
 
 #ifdef FIONBIO
 static int c_nbio=0;
@@ -173,16 +198,83 @@ static int c_Pause=0;
 static int c_debug=0;
 #ifndef OPENSSL_NO_TLSEXT
 static int c_tlsextdebug=0;
+static int c_status_req=0;
 #endif
 static int c_msg=0;
 static int c_showcerts=0;
 
 static void sc_usage(void);
 static void print_stuff(BIO *berr,SSL *con,int full);
+#ifndef OPENSSL_NO_TLSEXT
+static int ocsp_resp_cb(SSL *s, void *arg);
+#endif
 static BIO *bio_c_out=NULL;
 static int c_quiet=0;
 static int c_ign_eof=0;
 
+#ifndef OPENSSL_NO_PSK
+/* Default PSK identity and key */
+static char *psk_identity="Client_identity";
+/*char *psk_key=NULL;  by default PSK is not used */
+
+static unsigned int psk_client_cb(SSL *ssl, const char *hint, char *identity,
+	unsigned int max_identity_len, unsigned char *psk,
+	unsigned int max_psk_len)
+	{
+	unsigned int psk_len = 0;
+	int ret;
+        BIGNUM *bn=NULL;
+
+	if (c_debug)
+		BIO_printf(bio_c_out, "psk_client_cb\n");
+	if (!hint)
+                {
+                /* no ServerKeyExchange message*/
+		if (c_debug)
+			BIO_printf(bio_c_out,"NULL received PSK identity hint, continuing anyway\n");
+                }
+        else if (c_debug)
+		BIO_printf(bio_c_out, "Received PSK identity hint '%s'\n", hint);
+
+	/* lookup PSK identity and PSK key based on the given identity hint here */
+	ret = BIO_snprintf(identity, max_identity_len, "%s", psk_identity);
+	if (ret < 0 || (unsigned int)ret > max_identity_len)
+		goto out_err;
+	if (c_debug)
+		BIO_printf(bio_c_out, "created identity '%s' len=%d\n", identity, ret);
+        ret=BN_hex2bn(&bn, psk_key);
+        if (!ret)
+                {
+                BIO_printf(bio_err,"Could not convert PSK key '%s' to BIGNUM\n", psk_key);
+                if (bn)
+                        BN_free(bn);
+                return 0;
+                }
+
+        if ((unsigned int)BN_num_bytes(bn) > max_psk_len)
+                {
+                BIO_printf(bio_err,"psk buffer of callback is too small (%d) for key (%d)\n",
+                        max_psk_len, BN_num_bytes(bn));
+                BN_free(bn);
+                return 0;
+                }
+
+        psk_len=BN_bn2bin(bn, psk);
+        BN_free(bn);
+        if (psk_len == 0)
+                goto out_err;
+
+	if (c_debug)
+		BIO_printf(bio_c_out, "created PSK len=%d\n", psk_len);
+
+        return psk_len;
+ out_err:
+	if (c_debug)
+		BIO_printf(bio_err, "Error in PSK client callback\n");
+        return 0;
+	}
+#endif
+
 static void sc_usage(void)
 	{
 	BIO_printf(bio_err,"usage: s_client args\n");
@@ -191,7 +283,7 @@ static void sc_usage(void)
 	BIO_printf(bio_err," -port port     - use -connect instead\n");
 	BIO_printf(bio_err," -connect host:port - who to connect to (default is %s:%s)\n",SSL_HOST_NAME,PORT_STR);
 
-	BIO_printf(bio_err," -verify depth - turn on peer certificate verification\n");
+	BIO_printf(bio_err," -verify arg   - turn on peer certificate verification\n");
 	BIO_printf(bio_err," -cert arg     - certificate file to use, PEM format assumed\n");
 	BIO_printf(bio_err," -certform arg - certificate format (PEM or DER) PEM default\n");
 	BIO_printf(bio_err," -key arg      - Private key file to use, in cert file if\n");
@@ -216,11 +308,19 @@ static void sc_usage(void)
 	BIO_printf(bio_err," -crlf         - convert LF from terminal into CRLF\n");
 	BIO_printf(bio_err," -quiet        - no s_client output\n");
 	BIO_printf(bio_err," -ign_eof      - ignore input eof (default when -quiet)\n");
+	BIO_printf(bio_err," -no_ign_eof   - don't ignore input eof\n");
+#ifndef OPENSSL_NO_PSK
+	BIO_printf(bio_err," -psk_identity arg - PSK identity\n");
+	BIO_printf(bio_err," -psk arg      - PSK in hex (without 0x)\n");
+# ifndef OPENSSL_NO_JPAKE
+	BIO_printf(bio_err," -jpake arg    - JPAKE secret to use\n");
+# endif
+#endif
 	BIO_printf(bio_err," -ssl2         - just use SSLv2\n");
 	BIO_printf(bio_err," -ssl3         - just use SSLv3\n");
 	BIO_printf(bio_err," -tls1         - just use TLSv1\n");
 	BIO_printf(bio_err," -dtls1        - just use DTLSv1\n");    
-	BIO_printf(bio_err," -mtu          - set the MTU\n");
+	BIO_printf(bio_err," -mtu          - set the link layer MTU\n");
 	BIO_printf(bio_err," -no_tls1/-no_ssl3/-no_ssl2 - turn off that protocol\n");
 	BIO_printf(bio_err," -bugs         - Switch on all SSL implementation bug workarounds\n");
 	BIO_printf(bio_err," -serverpref   - Use server's cipher preferences (only SSLv2)\n");
@@ -229,7 +329,8 @@ static void sc_usage(void)
 	BIO_printf(bio_err," -starttls prot - use the STARTTLS command before starting TLS\n");
 	BIO_printf(bio_err,"                 for those protocols that support it, where\n");
 	BIO_printf(bio_err,"                 'prot' defines which one to assume.  Currently,\n");
-	BIO_printf(bio_err,"                 only \"smtp\", \"pop3\", \"imap\", and \"ftp\" are supported.\n");
+	BIO_printf(bio_err,"                 only \"smtp\", \"pop3\", \"imap\", \"ftp\" and \"xmpp\"\n");
+	BIO_printf(bio_err,"                 are supported.\n");
 #ifndef OPENSSL_NO_ENGINE
 	BIO_printf(bio_err," -engine id    - Initialise and use the specified engine\n");
 #endif
@@ -239,6 +340,7 @@ static void sc_usage(void)
 #ifndef OPENSSL_NO_TLSEXT
 	BIO_printf(bio_err," -servername host  - Set TLS extension servername in ClientHello\n");
 	BIO_printf(bio_err," -tlsextdebug      - hex dump of all TLS extensions received\n");
+	BIO_printf(bio_err," -status           - request certificate status from server\n");
 	BIO_printf(bio_err," -no_ticket        - disable use of RFC4507bis session tickets\n");
 #endif
 	}
@@ -264,13 +366,15 @@ static int MS_CALLBACK ssl_servername_cb(SSL *s, int *ad, void *arg)
 	return SSL_TLSEXT_ERR_OK;
 	}
 #endif
+
 enum
 {
 	PROTO_OFF	= 0,
 	PROTO_SMTP,
 	PROTO_POP3,
 	PROTO_IMAP,
-	PROTO_FTP
+	PROTO_FTP,
+	PROTO_XMPP
 };
 
 int MAIN(int, char **);
@@ -278,8 +382,7 @@ int MAIN(int, char **);
 int MAIN(int argc, char **argv)
 	{
 	int off=0;
-	SSL *con=NULL,*con2=NULL;
-	X509_STORE *store = NULL;
+	SSL *con=NULL;
 	int s,k,width,state=0;
 	char *cbuf=NULL,*sbuf=NULL,*mbuf=NULL;
 	int cbuf_len,cbuf_off;
@@ -300,23 +403,27 @@ int MAIN(int argc, char **argv)
 	SSL_CTX *ctx=NULL;
 	int ret=1,in_init=1,i,nbio_test=0;
 	int starttls_proto = PROTO_OFF;
-	int prexit = 0, vflags = 0;
-	SSL_METHOD *meth=NULL;
-#ifdef sock_type
-#undef sock_type
-#endif
-	int sock_type=SOCK_STREAM;
+	int prexit = 0;
+	X509_VERIFY_PARAM *vpm = NULL;
+	int badarg = 0;
+	const SSL_METHOD *meth=NULL;
+	int socket_type=SOCK_STREAM;
 	BIO *sbio;
 	char *inrand=NULL;
 	int mbuf_len=0;
+	struct timeval timeout, *timeoutp;
 #ifndef OPENSSL_NO_ENGINE
 	char *engine_id=NULL;
+	char *ssl_client_engine_id=NULL;
+	ENGINE *ssl_client_engine=NULL;
+#endif
 	ENGINE *e=NULL;
-#endif
-#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE)
+#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE) || defined(OPENSSL_SYS_BEOS_R5)
 	struct timeval tv;
+#if defined(OPENSSL_SYS_BEOS_R5)
+	int stdin_set = 0;
+#endif
 #endif
-
 #ifndef OPENSSL_NO_TLSEXT
 	char *servername = NULL; 
         tlsextctx tlsextcbp = 
@@ -327,7 +434,10 @@ int MAIN(int argc, char **argv)
 	struct sockaddr peer;
 	int peerlen = sizeof(peer);
 	int enable_timeouts = 0 ;
-	long mtu = 0;
+	long socket_mtu = 0;
+#ifndef OPENSSL_NO_JPAKE
+	char *jpake_secret = NULL;
+#endif
 
 #if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
 	meth=SSLv23_client_method();
@@ -413,10 +523,14 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			cert_format = str2fmt(*(++argv));
 			}
-		else if	(strcmp(*argv,"-crl_check") == 0)
-			vflags |= X509_V_FLAG_CRL_CHECK;
-		else if	(strcmp(*argv,"-crl_check_all") == 0)
-			vflags |= X509_V_FLAG_CRL_CHECK|X509_V_FLAG_CRL_CHECK_ALL;
+		else if (args_verify(&argv, &argc, &badarg, bio_err, &vpm))
+			{
+			if (badarg)
+				goto bad;
+			continue;
+			}
+		else if (strcmp(*argv,"-verify_return_error") == 0)
+			verify_return_error = 1;
 		else if	(strcmp(*argv,"-prexit") == 0)
 			prexit=1;
 		else if	(strcmp(*argv,"-crlf") == 0)
@@ -428,6 +542,8 @@ int MAIN(int argc, char **argv)
 			}
 		else if	(strcmp(*argv,"-ign_eof") == 0)
 			c_ign_eof=1;
+		else if	(strcmp(*argv,"-no_ign_eof") == 0)
+			c_ign_eof=0;
 		else if	(strcmp(*argv,"-pause") == 0)
 			c_Pause=1;
 		else if	(strcmp(*argv,"-debug") == 0)
@@ -435,6 +551,8 @@ int MAIN(int argc, char **argv)
 #ifndef OPENSSL_NO_TLSEXT
 		else if	(strcmp(*argv,"-tlsextdebug") == 0)
 			c_tlsextdebug=1;
+		else if	(strcmp(*argv,"-status") == 0)
+			c_status_req=1;
 #endif
 #ifdef WATT32
 		else if (strcmp(*argv,"-wdebug") == 0)
@@ -448,6 +566,27 @@ int MAIN(int argc, char **argv)
 			nbio_test=1;
 		else if	(strcmp(*argv,"-state") == 0)
 			state=1;
+#ifndef OPENSSL_NO_PSK
+                else if (strcmp(*argv,"-psk_identity") == 0)
+			{
+			if (--argc < 1) goto bad;
+			psk_identity=*(++argv);
+			}
+                else if (strcmp(*argv,"-psk") == 0)
+			{
+                        size_t j;
+
+			if (--argc < 1) goto bad;
+			psk_key=*(++argv);
+			for (j = 0; j < strlen(psk_key); j++)
+                                {
+                                if (isxdigit((int)psk_key[j]))
+                                        continue;
+                                BIO_printf(bio_err,"Not a hex number '%s'\n",*argv);
+                                goto bad;
+                                }
+			}
+#endif
 #ifndef OPENSSL_NO_SSL2
 		else if	(strcmp(*argv,"-ssl2") == 0)
 			meth=SSLv2_client_method();
@@ -464,14 +603,14 @@ int MAIN(int argc, char **argv)
 		else if	(strcmp(*argv,"-dtls1") == 0)
 			{
 			meth=DTLSv1_client_method();
-			sock_type=SOCK_DGRAM;
+			socket_type=SOCK_DGRAM;
 			}
 		else if (strcmp(*argv,"-timeout") == 0)
 			enable_timeouts=1;
 		else if (strcmp(*argv,"-mtu") == 0)
 			{
 			if (--argc < 1) goto bad;
-			mtu = atol(*(++argv));
+			socket_mtu = atol(*(++argv));
 			}
 #endif
 		else if (strcmp(*argv,"-bugs") == 0)
@@ -511,6 +650,8 @@ int MAIN(int argc, char **argv)
 			off|=SSL_OP_NO_SSLv3;
 		else if (strcmp(*argv,"-no_ssl2") == 0)
 			off|=SSL_OP_NO_SSLv2;
+		else if	(strcmp(*argv,"-no_comp") == 0)
+			{ off|=SSL_OP_NO_COMPRESSION; }
 #ifndef OPENSSL_NO_TLSEXT
 		else if	(strcmp(*argv,"-no_ticket") == 0)
 			{ off|=SSL_OP_NO_TICKET; }
@@ -538,6 +679,8 @@ int MAIN(int argc, char **argv)
 				starttls_proto = PROTO_IMAP;
 			else if (strcmp(*argv,"ftp") == 0)
 				starttls_proto = PROTO_FTP;
+			else if (strcmp(*argv, "xmpp") == 0)
+				starttls_proto = PROTO_XMPP;
 			else
 				goto bad;
 			}
@@ -547,6 +690,11 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			engine_id = *(++argv);
 			}
+		else if	(strcmp(*argv,"-ssl_client_engine") == 0)
+			{
+			if (--argc < 1) goto bad;
+			ssl_client_engine_id = *(++argv);
+			}
 #endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
@@ -560,6 +708,13 @@ int MAIN(int argc, char **argv)
 			servername= *(++argv);
 			/* meth=TLSv1_client_method(); */
 			}
+#endif
+#ifndef OPENSSL_NO_JPAKE
+		else if (strcmp(*argv,"-jpake") == 0)
+			{
+			if (--argc < 1) goto bad;
+			jpake_secret = *++argv;
+			}
 #endif
 		else
 			{
@@ -577,11 +732,42 @@ bad:
 		goto end;
 		}
 
+#if !defined(OPENSSL_NO_JPAKE) && !defined(OPENSSL_NO_PSK)
+	if (jpake_secret)
+		{
+		if (psk_key)
+			{
+			BIO_printf(bio_err,
+				   "Can't use JPAKE and PSK together\n");
+			goto end;
+			}
+		psk_identity = "JPAKE";
+		}
+
+	if (cipher)
+		{
+		BIO_printf(bio_err, "JPAKE sets cipher to PSK\n");
+		goto end;
+		}
+	cipher = "PSK";
+#endif
+
 	OpenSSL_add_ssl_algorithms();
 	SSL_load_error_strings();
 
 #ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine_id, 1);
+	if (ssl_client_engine_id)
+		{
+		ssl_client_engine = ENGINE_by_id(ssl_client_engine_id);
+		if (!ssl_client_engine)
+			{
+			BIO_printf(bio_err,
+					"Error getting client auth engine\n");
+			goto end;
+			}
+		}
+
 #endif
 	if (!app_passwd(bio_err, passarg, NULL, &pass, NULL))
 		{
@@ -649,6 +835,35 @@ bad:
 		goto end;
 		}
 
+	if (vpm)
+		SSL_CTX_set1_param(ctx, vpm);
+
+#ifndef OPENSSL_NO_ENGINE
+	if (ssl_client_engine)
+		{
+		if (!SSL_CTX_set_client_cert_engine(ctx, ssl_client_engine))
+			{
+			BIO_puts(bio_err, "Error setting client auth engine\n");
+			ERR_print_errors(bio_err);
+			ENGINE_free(ssl_client_engine);
+			goto end;
+			}
+		ENGINE_free(ssl_client_engine);
+		}
+#endif
+
+#ifndef OPENSSL_NO_PSK
+#ifdef OPENSSL_NO_JPAKE
+	if (psk_key != NULL)
+#else
+	if (psk_key != NULL || jpake_secret)
+#endif
+		{
+		if (c_debug)
+			BIO_printf(bio_c_out, "PSK key given or JPAKE in use, setting client callback\n");
+		SSL_CTX_set_psk_client_callback(ctx, psk_client_cb);
+		}
+#endif
 	if (bugs)
 		SSL_CTX_set_options(ctx,SSL_OP_ALL|off);
 	else
@@ -656,7 +871,7 @@ bad:
 	/* DTLS: partial reads end up discarding unread UDP bytes :-( 
 	 * Setting read ahead solves this problem.
 	 */
-	if (sock_type == SOCK_DGRAM) SSL_CTX_set_read_ahead(ctx, 1);
+	if (socket_type == SOCK_DGRAM) SSL_CTX_set_read_ahead(ctx, 1);
 
 	if (state) SSL_CTX_set_info_callback(ctx,apps_ssl_info_callback);
 	if (cipher != NULL)
@@ -682,8 +897,6 @@ bad:
 		/* goto end; */
 		}
 
-	store = SSL_CTX_get_cert_store(ctx);
-	X509_STORE_set_flags(store, vflags);
 #ifndef OPENSSL_NO_TLSEXT
 	if (servername != NULL)
 		{
@@ -728,7 +941,6 @@ bad:
 			}
 		}
 #endif
-
 #ifndef OPENSSL_NO_KRB5
 	if (con  &&  (con->kssl_ctx = kssl_ctx_new()) != NULL)
                 {
@@ -736,10 +948,15 @@ bad:
 		}
 #endif	/* OPENSSL_NO_KRB5  */
 /*	SSL_set_cipher_list(con,"RC4-MD5"); */
+#if 0
+#ifdef TLSEXT_TYPE_opaque_prf_input
+	SSL_set_tlsext_opaque_prf_input(con, "Test client", 11);
+#endif
+#endif
 
 re_start:
 
-	if (init_client(&s,host,port,sock_type) == 0)
+	if (init_client(&s,host,port,socket_type) == 0)
 		{
 		BIO_printf(bio_err,"connect:errno=%d\n",get_last_socket_error());
 		SHUTDOWN(s);
@@ -763,7 +980,6 @@ re_start:
 
 	if ( SSL_version(con) == DTLS1_VERSION)
 		{
-		struct timeval timeout;
 
 		sbio=BIO_new_dgram(s,BIO_NOCLOSE);
 		if (getsockname(s, &peer, (void *)&peerlen) < 0)
@@ -776,7 +992,7 @@ re_start:
 
 		(void)BIO_ctrl_set_connected(sbio, 1, &peer);
 
-		if ( enable_timeouts)
+		if (enable_timeouts)
 			{
 			timeout.tv_sec = 0;
 			timeout.tv_usec = DGRAM_RCV_TIMEOUT;
@@ -787,10 +1003,10 @@ re_start:
 			BIO_ctrl(sbio, BIO_CTRL_DGRAM_SET_SEND_TIMEOUT, 0, &timeout);
 			}
 
-		if ( mtu > 0)
+		if (socket_mtu > 28)
 			{
 			SSL_set_options(con, SSL_OP_NO_QUERY_MTU);
-			SSL_set_mtu(con, mtu);
+			SSL_set_mtu(con, socket_mtu - 28);
 			}
 		else
 			/* want to do MTU discovery */
@@ -799,8 +1015,6 @@ re_start:
 	else
 		sbio=BIO_new_socket(s,BIO_NOCLOSE);
 
-
-
 	if (nbio_test)
 		{
 		BIO *test;
@@ -826,6 +1040,27 @@ re_start:
 		SSL_set_tlsext_debug_callback(con, tlsext_cb);
 		SSL_set_tlsext_debug_arg(con, bio_c_out);
 		}
+	if (c_status_req)
+		{
+		SSL_set_tlsext_status_type(con, TLSEXT_STATUSTYPE_ocsp);
+		SSL_CTX_set_tlsext_status_cb(ctx, ocsp_resp_cb);
+		SSL_CTX_set_tlsext_status_arg(ctx, bio_c_out);
+#if 0
+{
+STACK_OF(OCSP_RESPID) *ids = sk_OCSP_RESPID_new_null();
+OCSP_RESPID *id = OCSP_RESPID_new();
+id->value.byKey = ASN1_OCTET_STRING_new();
+id->type = V_OCSP_RESPID_KEY;
+ASN1_STRING_set(id->value.byKey, "Hello World", -1);
+sk_OCSP_RESPID_push(ids, id);
+SSL_set_tlsext_status_ids(con, ids);
+}
+#endif
+		}
+#endif
+#ifndef OPENSSL_NO_JPAKE
+	if (jpake_secret)
+		jpake_client_auth(bio_c_out, sbio, jpake_secret);
 #endif
 
 	SSL_set_bio(con,sbio,sbio);
@@ -933,12 +1168,40 @@ re_start:
 		BIO_printf(sbio,"AUTH TLS\r\n");
 		BIO_read(sbio,sbuf,BUFSIZZ);
 		}
+	if (starttls_proto == PROTO_XMPP)
+		{
+		int seen = 0;
+		BIO_printf(sbio,"<stream:stream "
+		    "xmlns:stream='http://etherx.jabber.org/streams' "
+		    "xmlns='jabber:client' to='%s' version='1.0'>", host);
+		seen = BIO_read(sbio,mbuf,BUFSIZZ);
+		mbuf[seen] = 0;
+		while (!strstr(mbuf, "<starttls xmlns='urn:ietf:params:xml:ns:xmpp-tls'"))
+			{
+			if (strstr(mbuf, "/stream:features>"))
+				goto shut;
+			seen = BIO_read(sbio,mbuf,BUFSIZZ);
+			mbuf[seen] = 0;
+			}
+		BIO_printf(sbio, "<starttls xmlns='urn:ietf:params:xml:ns:xmpp-tls'/>");
+		seen = BIO_read(sbio,sbuf,BUFSIZZ);
+		sbuf[seen] = 0;
+		if (!strstr(sbuf, "<proceed"))
+			goto shut;
+		mbuf[0] = 0;
+		}
 
 	for (;;)
 		{
 		FD_ZERO(&readfds);
 		FD_ZERO(&writefds);
 
+		if ((SSL_version(con) == DTLS1_VERSION) &&
+			DTLSv1_get_timeout(con, &timeout))
+			timeoutp = &timeout;
+		else
+			timeoutp = NULL;
+
 		if (SSL_in_init(con) && !SSL_total_renegotiations(con))
 			{
 			in_init=1;
@@ -950,6 +1213,14 @@ re_start:
 			if (in_init)
 				{
 				in_init=0;
+#if 0 /* This test doesn't really work as intended (needs to be fixed) */
+#ifndef OPENSSL_NO_TLSEXT
+				if (servername != NULL && !SSL_session_reused(con))
+					{
+					BIO_printf(bio_c_out,"Server did %sacknowledge servername extension.\n",tlsextcbp.ack?"":"not ");
+					}
+#endif
+#endif
 				if (sess_out)
 					{
 					BIO *stmp = BIO_new_file(sess_out, "w");
@@ -987,22 +1258,22 @@ re_start:
 
 		if (!ssl_pending)
 			{
-#if !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_NETWARE)
+#if !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_NETWARE) && !defined (OPENSSL_SYS_BEOS_R5)
 			if (tty_on)
 				{
-				if (read_tty)  FD_SET(fileno(stdin),&readfds);
-				if (write_tty) FD_SET(fileno(stdout),&writefds);
+				if (read_tty)  openssl_fdset(fileno(stdin),&readfds);
+				if (write_tty) openssl_fdset(fileno(stdout),&writefds);
 				}
 			if (read_ssl)
-				FD_SET(SSL_get_fd(con),&readfds);
+				openssl_fdset(SSL_get_fd(con),&readfds);
 			if (write_ssl)
-				FD_SET(SSL_get_fd(con),&writefds);
+				openssl_fdset(SSL_get_fd(con),&writefds);
 #else
 			if(!tty_on || !write_tty) {
 				if (read_ssl)
-					FD_SET(SSL_get_fd(con),&readfds);
+					openssl_fdset(SSL_get_fd(con),&readfds);
 				if (write_ssl)
-					FD_SET(SSL_get_fd(con),&writefds);
+					openssl_fdset(SSL_get_fd(con),&writefds);
 			}
 #endif
 /*			printf("mode tty(%d %d%d) ssl(%d%d)\n",
@@ -1035,7 +1306,7 @@ re_start:
 					if(!i && (!((_kbhit()) || (WAIT_OBJECT_0 == WaitForSingleObject(GetStdHandle(STD_INPUT_HANDLE), 0))) || !read_tty) ) continue;
 #endif
 				} else 	i=select(width,(void *)&readfds,(void *)&writefds,
-					 NULL,NULL);
+					 NULL,timeoutp);
 			}
 #elif defined(OPENSSL_SYS_NETWARE)
 			if(!write_tty) {
@@ -1045,11 +1316,30 @@ re_start:
 					i=select(width,(void *)&readfds,(void *)&writefds,
 						NULL,&tv);
 				} else 	i=select(width,(void *)&readfds,(void *)&writefds,
-					NULL,NULL);
+					NULL,timeoutp);
 			}
+#elif defined(OPENSSL_SYS_BEOS_R5)
+			/* Under BeOS-R5 the situation is similar to DOS */
+			i=0;
+			stdin_set = 0;
+			(void)fcntl(fileno(stdin), F_SETFL, O_NONBLOCK);
+			if(!write_tty) {
+				if(read_tty) {
+					tv.tv_sec = 1;
+					tv.tv_usec = 0;
+					i=select(width,(void *)&readfds,(void *)&writefds,
+						 NULL,&tv);
+					if (read(fileno(stdin), sbuf, 0) >= 0)
+						stdin_set = 1;
+					if (!i && (stdin_set != 1 || !read_tty))
+						continue;
+				} else 	i=select(width,(void *)&readfds,(void *)&writefds,
+					 NULL,timeoutp);
+			}
+			(void)fcntl(fileno(stdin), F_SETFL, 0);
 #else
 			i=select(width,(void *)&readfds,(void *)&writefds,
-				 NULL,NULL);
+				 NULL,timeoutp);
 #endif
 			if ( i < 0)
 				{
@@ -1060,6 +1350,11 @@ re_start:
 				}
 			}
 
+		if ((SSL_version(con) == DTLS1_VERSION) && DTLSv1_handle_timeout(con) > 0)
+			{
+			BIO_printf(bio_err,"TIMEOUT occured\n");
+			}
+
 		if (!ssl_pending && FD_ISSET(SSL_get_fd(con),&writefds))
 			{
 			k=SSL_write(con,&(cbuf[cbuf_off]),
@@ -1100,6 +1395,7 @@ re_start:
 				if (cbuf_len != 0)
 					{
 					BIO_printf(bio_c_out,"shutdown\n");
+					ret = 0;
 					goto shut;
 					}
 				else
@@ -1127,8 +1423,8 @@ re_start:
 				goto shut;
 				}
 			}
-#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE)
-		/* Assume Windows/DOS can always write */
+#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE) || defined(OPENSSL_SYS_BEOS_R5)
+		/* Assume Windows/DOS/BeOS can always write */
 		else if (!ssl_pending && write_tty)
 #else
 		else if (!ssl_pending && FD_ISSET(fileno(stdout),&writefds))
@@ -1137,11 +1433,12 @@ re_start:
 #ifdef CHARSET_EBCDIC
 			ascii2ebcdic(&(sbuf[sbuf_off]),&(sbuf[sbuf_off]),sbuf_len);
 #endif
-			i=write(fileno(stdout),&(sbuf[sbuf_off]),sbuf_len);
+			i=raw_write_stdout(&(sbuf[sbuf_off]),sbuf_len);
 
 			if (i <= 0)
 				{
 				BIO_printf(bio_c_out,"DONE\n");
+				ret = 0;
 				goto shut;
 				/* goto end; */
 				}
@@ -1196,10 +1493,12 @@ printf("read=%d pending=%d peek=%d\n",k,SSL_pending(con),SSL_peek(con,zbuf,10240
 				BIO_printf(bio_c_out,"read X BLOCK\n");
 				break;
 			case SSL_ERROR_SYSCALL:
-				BIO_printf(bio_err,"read:errno=%d\n",get_last_socket_error());
+				ret=get_last_socket_error();
+				BIO_printf(bio_err,"read:errno=%d\n",ret);
 				goto shut;
 			case SSL_ERROR_ZERO_RETURN:
 				BIO_printf(bio_c_out,"closed\n");
+				ret=0;
 				goto shut;
 			case SSL_ERROR_SSL:
 				ERR_print_errors(bio_err);
@@ -1215,7 +1514,9 @@ printf("read=%d pending=%d peek=%d\n",k,SSL_pending(con),SSL_peek(con,zbuf,10240
 		else if ((_kbhit()) || (WAIT_OBJECT_0 == WaitForSingleObject(GetStdHandle(STD_INPUT_HANDLE), 0)))
 #endif
 #elif defined (OPENSSL_SYS_NETWARE)
-        else if (_kbhit())
+		else if (_kbhit())
+#elif defined(OPENSSL_SYS_BEOS_R5)
+		else if (stdin_set)
 #else
 		else if (FD_ISSET(fileno(stdin),&readfds))
 #endif
@@ -1224,7 +1525,7 @@ printf("read=%d pending=%d peek=%d\n",k,SSL_pending(con),SSL_peek(con,zbuf,10240
 				{
 				int j, lf_num;
 
-				i=read(fileno(stdin),cbuf,BUFSIZZ/2);
+				i=raw_read_stdin(cbuf,BUFSIZZ/2);
 				lf_num = 0;
 				/* both loops are skipped when i <= 0 */
 				for (j = 0; j < i; j++)
@@ -1243,11 +1544,12 @@ printf("read=%d pending=%d peek=%d\n",k,SSL_pending(con),SSL_peek(con,zbuf,10240
 				assert(lf_num == 0);
 				}
 			else
-				i=read(fileno(stdin),cbuf,BUFSIZZ);
+				i=raw_read_stdin(cbuf,BUFSIZZ);
 
 			if ((!c_ign_eof) && ((i <= 0) || (cbuf[0] == 'Q')))
 				{
 				BIO_printf(bio_err,"DONE\n");
+				ret=0;
 				goto shut;
 				}
 
@@ -1270,14 +1572,20 @@ printf("read=%d pending=%d peek=%d\n",k,SSL_pending(con),SSL_peek(con,zbuf,10240
 			read_tty=0;
 			}
 		}
+
+	ret=0;
 shut:
+	if (in_init)
+		print_stuff(bio_c_out,con,full_log);
 	SSL_shutdown(con);
 	SHUTDOWN(SSL_get_fd(con));
-	ret=0;
 end:
-	if(prexit) print_stuff(bio_c_out,con,1);
-	if (con != NULL) SSL_free(con);
-	if (con2 != NULL) SSL_free(con2);
+	if (con != NULL)
+		{
+		if (prexit != 0)
+			print_stuff(bio_c_out,con,1);
+		SSL_free(con);
+		}
 	if (ctx != NULL) SSL_CTX_free(ctx);
 	if (cert)
 		X509_free(cert);
@@ -1306,7 +1614,7 @@ static void print_stuff(BIO *bio, SSL *s, int full)
 	char buf[BUFSIZ];
 	STACK_OF(X509) *sk;
 	STACK_OF(X509_NAME) *sk2;
-	SSL_CIPHER *c;
+	const SSL_CIPHER *c;
 	X509_NAME *xn;
 	int j,i;
 #ifndef OPENSSL_NO_COMP
@@ -1430,3 +1738,32 @@ static void print_stuff(BIO *bio, SSL *s, int full)
 	(void)BIO_flush(bio);
 	}
 
+#ifndef OPENSSL_NO_TLSEXT
+
+static int ocsp_resp_cb(SSL *s, void *arg)
+	{
+	const unsigned char *p;
+	int len;
+	OCSP_RESPONSE *rsp;
+	len = SSL_get_tlsext_status_ocsp_resp(s, &p);
+	BIO_puts(arg, "OCSP response: ");
+	if (!p)
+		{
+		BIO_puts(arg, "no response sent\n");
+		return 1;
+		}
+	rsp = d2i_OCSP_RESPONSE(NULL, &p, len);
+	if (!rsp)
+		{
+		BIO_puts(arg, "response parse error\n");
+		BIO_dump_indent(arg, (char *)p, len, 4);
+		return 0;
+		}
+	BIO_puts(arg, "\n======================================\n");
+	OCSP_RESPONSE_print(arg, rsp, 0);
+	BIO_puts(arg, "======================================\n");
+	OCSP_RESPONSE_free(rsp);
+	return 1;
+	}
+
+#endif

apps/s_server.c

@@ -56,7 +56,7 @@
  * [including the GNU Public Licence.]
  */
 /* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2006 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -113,6 +113,32 @@
  * ECC cipher suite support in OpenSSL originally developed by 
  * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project.
  */
+/* ====================================================================
+ * Copyright 2005 Nokia. All rights reserved.
+ *
+ * The portions of the attached software ("Contribution") is developed by
+ * Nokia Corporation and is licensed pursuant to the OpenSSL open source
+ * license.
+ *
+ * The Contribution, originally written by Mika Kousa and Pasi Eronen of
+ * Nokia Corporation, consists of the "PSK" (Pre-Shared Key) ciphersuites
+ * support (see RFC 4279) to OpenSSL.
+ *
+ * No patent licenses or other rights except those expressly stated in
+ * the OpenSSL open source license shall be deemed granted or received
+ * expressly, by implication, estoppel, or otherwise.
+ *
+ * No assurances are provided by Nokia that the Contribution does not
+ * infringe the patent or other intellectual property rights of any third
+ * party or that the license provides you with all the necessary rights
+ * to make use of the Contribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IN
+ * ADDITION TO THE DISCLAIMERS INCLUDED IN THE LICENSE, NOKIA
+ * SPECIFICALLY DISCLAIMS ANY LIABILITY FOR CLAIMS BROUGHT BY YOU OR ANY
+ * OTHER ENTITY BASED ON INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OR
+ * OTHERWISE.
+ */
 
 /* Until the key-gen callbacks are modified to use newer prototypes, we allow
  * deprecated functions for openssl-internal code */
@@ -121,11 +147,11 @@
 #endif
 
 #include <assert.h>
+#include <ctype.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
 
-#include <sys/stat.h>
 #include <openssl/e_os2.h>
 #ifdef OPENSSL_NO_STDIO
 #define APPS_WIN16
@@ -153,6 +179,7 @@ typedef unsigned int u_int;
 #include <openssl/x509.h>
 #include <openssl/ssl.h>
 #include <openssl/rand.h>
+#include <openssl/ocsp.h>
 #ifndef OPENSSL_NO_DH
 #include <openssl/dh.h>
 #endif
@@ -162,19 +189,15 @@ typedef unsigned int u_int;
 #include "s_apps.h"
 #include "timeouts.h"
 
-#ifdef OPENSSL_SYS_WINCE
-/* Windows CE incorrectly defines fileno as returning void*, so to avoid problems below... */
-#ifdef fileno
-#undef fileno
-#endif
-#define fileno(a) (int)_fileno(a)
-#endif
-
 #if (defined(OPENSSL_SYS_VMS) && __VMS_VER < 70000000)
 /* FIONBIO used as a switch to enable ioctl, and that isn't in VMS < 7.0 */
 #undef FIONBIO
 #endif
 
+#if defined(OPENSSL_SYS_BEOS_R5)
+#include <fcntl.h>
+#endif
+
 #ifndef OPENSSL_NO_RSA
 static RSA MS_CALLBACK *tmp_rsa_cb(SSL *s, int is_export, int keylength);
 #endif
@@ -195,14 +218,6 @@ static DH *get_dh512(void);
 static void s_server_init(void);
 #endif
 
-#ifndef S_ISDIR
-# if defined(_S_IFMT) && defined(_S_IFDIR)
-#  define S_ISDIR(a)	(((a) & _S_IFMT) == _S_IFDIR)
-# else
-#  define S_ISDIR(a)	(((a) & S_IFMT) == S_IFDIR)
-# endif
-#endif
-
 #ifndef OPENSSL_NO_DH
 static unsigned char dh512_p[]={
 	0xDA,0x58,0x3C,0x16,0xD9,0x85,0x22,0x89,0xD0,0xE4,0xAF,0x75,
@@ -244,7 +259,7 @@ static int accept_socket= -1;
 #undef PROG
 #define PROG		s_server_main
 
-extern int verify_depth;
+extern int verify_depth, verify_return_error;
 
 static char *cipher=NULL;
 static int s_server_verify=SSL_VERIFY_NONE;
@@ -269,6 +284,8 @@ static BIO *bio_s_out=NULL;
 static int s_debug=0;
 #ifndef OPENSSL_NO_TLSEXT
 static int s_tlsextdebug=0;
+static int s_tlsextstatus=0;
+static int cert_status_cb(SSL *s, void *arg);
 #endif
 static int s_msg=0;
 static int s_quiet=0;
@@ -280,12 +297,77 @@ static char *engine_id=NULL;
 static const char *session_id_prefix=NULL;
 
 static int enable_timeouts = 0;
-#ifdef mtu
-#undef mtu
-#endif
-static long mtu;
+static long socket_mtu;
+#ifndef OPENSSL_NO_DTLS1
 static int cert_chain = 0;
+#endif
 
+#ifndef OPENSSL_NO_PSK
+static char *psk_identity="Client_identity";
+char *psk_key=NULL; /* by default PSK is not used */
+
+static unsigned int psk_server_cb(SSL *ssl, const char *identity,
+	unsigned char *psk, unsigned int max_psk_len)
+	{
+	unsigned int psk_len = 0;
+	int ret;
+	BIGNUM *bn = NULL;
+
+	if (s_debug)
+		BIO_printf(bio_s_out,"psk_server_cb\n");
+	if (!identity)
+		{
+		BIO_printf(bio_err,"Error: client did not send PSK identity\n");
+		goto out_err;
+		}
+	if (s_debug)
+		BIO_printf(bio_s_out,"identity_len=%d identity=%s\n",
+			identity ? (int)strlen(identity) : 0, identity);
+
+	/* here we could lookup the given identity e.g. from a database */
+  	if (strcmp(identity, psk_identity) != 0)
+		{
+                BIO_printf(bio_s_out, "PSK error: client identity not found"
+			   " (got '%s' expected '%s')\n", identity,
+			   psk_identity);
+		goto out_err;
+                }
+	if (s_debug)
+		BIO_printf(bio_s_out, "PSK client identity found\n");
+
+	/* convert the PSK key to binary */
+	ret = BN_hex2bn(&bn, psk_key);
+	if (!ret)
+		{
+		BIO_printf(bio_err,"Could not convert PSK key '%s' to BIGNUM\n", psk_key);
+		if (bn)
+			BN_free(bn);
+		return 0;
+		}
+	if (BN_num_bytes(bn) > (int)max_psk_len)
+		{
+		BIO_printf(bio_err,"psk buffer of callback is too small (%d) for key (%d)\n",
+			max_psk_len, BN_num_bytes(bn));
+		BN_free(bn);
+		return 0;
+		}
+
+	ret = BN_bn2bin(bn, psk);
+	BN_free(bn);
+
+	if (ret < 0)
+		goto out_err;
+	psk_len = (unsigned int)ret;
+
+	if (s_debug)
+		BIO_printf(bio_s_out, "fetched PSK len=%d\n", psk_len);
+        return psk_len;
+ out_err:
+	if (s_debug)
+		BIO_printf(bio_err, "Error in PSK server callback\n");
+	return 0;
+        }
+#endif
 
 #ifdef MONOLITH
 static void s_server_init(void)
@@ -330,6 +412,11 @@ static void sv_usage(void)
 	BIO_printf(bio_err," -Verify arg   - turn on peer certificate verification, must have a cert.\n");
 	BIO_printf(bio_err," -cert arg     - certificate file to use\n");
 	BIO_printf(bio_err,"                 (default is %s)\n",TEST_CERT);
+	BIO_printf(bio_err," -crl_check    - check the peer certificate has not been revoked by its CA.\n" \
+	                   "                 The CRL(s) are appended to the certificate file\n");
+	BIO_printf(bio_err," -crl_check_all - check the peer certificate has not been revoked by its CA\n" \
+	                   "                 or any other CRL in the CA chain. CRL(s) are appened to the\n" \
+	                   "                 the certificate file.\n");
 	BIO_printf(bio_err," -certform arg - certificate format (PEM or DER) PEM default\n");
 	BIO_printf(bio_err," -key arg      - Private Key file to use, in cert file if\n");
 	BIO_printf(bio_err,"                 not specified (default is %s)\n",TEST_CERT);
@@ -345,7 +432,7 @@ static void sv_usage(void)
 #ifndef OPENSSL_NO_ECDH
 	BIO_printf(bio_err," -named_curve arg  - Elliptic curve name to use for ephemeral ECDH keys.\n" \
 	                   "                 Use \"openssl ecparam -list_curves\" for all names\n" \
-	                   "                 (default is sect163r2).\n");
+	                   "                 (default is nistp256).\n");
 #endif
 #ifdef FIONBIO
 	BIO_printf(bio_err," -nbio         - Run with non-blocking IO\n");
@@ -362,12 +449,19 @@ static void sv_usage(void)
 	BIO_printf(bio_err," -serverpref   - Use server's cipher preferences\n");
 	BIO_printf(bio_err," -quiet        - No server output\n");
 	BIO_printf(bio_err," -no_tmp_rsa   - Do not generate a tmp RSA key\n");
+#ifndef OPENSSL_NO_PSK
+	BIO_printf(bio_err," -psk_hint arg - PSK identity hint to use\n");
+	BIO_printf(bio_err," -psk arg      - PSK in hex (without 0x)\n");
+# ifndef OPENSSL_NO_JPAKE
+	BIO_printf(bio_err," -jpake arg    - JPAKE secret to use\n");
+# endif
+#endif
 	BIO_printf(bio_err," -ssl2         - Just talk SSLv2\n");
 	BIO_printf(bio_err," -ssl3         - Just talk SSLv3\n");
 	BIO_printf(bio_err," -tls1         - Just talk TLSv1\n");
 	BIO_printf(bio_err," -dtls1        - Just talk DTLSv1\n");
 	BIO_printf(bio_err," -timeout      - Enable timeouts\n");
-	BIO_printf(bio_err," -mtu          - Set MTU\n");
+	BIO_printf(bio_err," -mtu          - Set link layer MTU\n");
 	BIO_printf(bio_err," -chain        - Read a certificate chain\n");
 	BIO_printf(bio_err," -no_ssl2      - Just disable SSLv2\n");
 	BIO_printf(bio_err," -no_ssl3      - Just disable SSLv3\n");
@@ -579,19 +673,170 @@ static int MS_CALLBACK ssl_servername_cb(SSL *s, int *ad, void *arg)
 			return p->extension_error;
 		if (ctx2)
 			{
-			BIO_printf(p->biodebug,"Swiching server context.\n");
+			BIO_printf(p->biodebug,"Switching server context.\n");
 			SSL_set_SSL_CTX(s,ctx2);
 			}     
 		}
 	return SSL_TLSEXT_ERR_OK;
 }
+
+/* Structure passed to cert status callback */
+
+typedef struct tlsextstatusctx_st {
+   /* Default responder to use */
+   char *host, *path, *port;
+   int use_ssl;
+   int timeout;
+   BIO *err;
+   int verbose;
+} tlsextstatusctx;
+
+static tlsextstatusctx tlscstatp = {NULL, NULL, NULL, 0, -1, NULL, 0};
+
+/* Certificate Status callback. This is called when a client includes a
+ * certificate status request extension.
+ *
+ * This is a simplified version. It examines certificates each time and
+ * makes one OCSP responder query for each request.
+ *
+ * A full version would store details such as the OCSP certificate IDs and
+ * minimise the number of OCSP responses by caching them until they were
+ * considered "expired".
+ */
+
+static int cert_status_cb(SSL *s, void *arg)
+	{
+	tlsextstatusctx *srctx = arg;
+	BIO *err = srctx->err;
+	char *host, *port, *path;
+	int use_ssl;
+	unsigned char *rspder = NULL;
+	int rspderlen;
+	STACK_OF(OPENSSL_STRING) *aia = NULL;
+	X509 *x = NULL;
+	X509_STORE_CTX inctx;
+	X509_OBJECT obj;
+	OCSP_REQUEST *req = NULL;
+	OCSP_RESPONSE *resp = NULL;
+	OCSP_CERTID *id = NULL;
+	STACK_OF(X509_EXTENSION) *exts;
+	int ret = SSL_TLSEXT_ERR_NOACK;
+	int i;
+#if 0
+STACK_OF(OCSP_RESPID) *ids;
+SSL_get_tlsext_status_ids(s, &ids);
+BIO_printf(err, "cert_status: received %d ids\n", sk_OCSP_RESPID_num(ids));
 #endif
+	if (srctx->verbose)
+		BIO_puts(err, "cert_status: callback called\n");
+	/* Build up OCSP query from server certificate */
+	x = SSL_get_certificate(s);
+	aia = X509_get1_ocsp(x);
+	if (aia)
+		{
+		if (!OCSP_parse_url(sk_OPENSSL_STRING_value(aia, 0),
+			&host, &port, &path, &use_ssl))
+			{
+			BIO_puts(err, "cert_status: can't parse AIA URL\n");
+			goto err;
+			}
+		if (srctx->verbose)
+			BIO_printf(err, "cert_status: AIA URL: %s\n",
+					sk_OPENSSL_STRING_value(aia, 0));
+		}
+	else
+		{
+		if (!srctx->host)
+			{
+			BIO_puts(srctx->err, "cert_status: no AIA and no default responder URL\n");
+			goto done;
+			}
+		host = srctx->host;
+		path = srctx->path;
+		port = srctx->port;
+		use_ssl = srctx->use_ssl;
+		}
+		
+	if (!X509_STORE_CTX_init(&inctx,
+				SSL_CTX_get_cert_store(SSL_get_SSL_CTX(s)),
+				NULL, NULL))
+		goto err;
+	if (X509_STORE_get_by_subject(&inctx,X509_LU_X509,
+				X509_get_issuer_name(x),&obj) <= 0)
+		{
+		BIO_puts(err, "cert_status: Can't retrieve issuer certificate.\n");
+		X509_STORE_CTX_cleanup(&inctx);
+		goto done;
+		}
+	req = OCSP_REQUEST_new();
+	if (!req)
+		goto err;
+	id = OCSP_cert_to_id(NULL, x, obj.data.x509);
+	X509_free(obj.data.x509);
+	X509_STORE_CTX_cleanup(&inctx);
+	if (!id)
+		goto err;
+	if (!OCSP_request_add0_id(req, id))
+		goto err;
+	id = NULL;
+	/* Add any extensions to the request */
+	SSL_get_tlsext_status_exts(s, &exts);
+	for (i = 0; i < sk_X509_EXTENSION_num(exts); i++)
+		{
+		X509_EXTENSION *ext = sk_X509_EXTENSION_value(exts, i);
+		if (!OCSP_REQUEST_add_ext(req, ext, -1))
+			goto err;
+		}
+	resp = process_responder(err, req, host, path, port, use_ssl, NULL,
+					srctx->timeout);
+	if (!resp)
+		{
+		BIO_puts(err, "cert_status: error querying responder\n");
+		goto done;
+		}
+	rspderlen = i2d_OCSP_RESPONSE(resp, &rspder);
+	if (rspderlen <= 0)
+		goto err;
+	SSL_set_tlsext_status_ocsp_resp(s, rspder, rspderlen);
+	if (srctx->verbose)
+		{
+		BIO_puts(err, "cert_status: ocsp response sent:\n");
+		OCSP_RESPONSE_print(err, resp, 2);
+		}
+	ret = SSL_TLSEXT_ERR_OK;
+	done:
+	if (ret != SSL_TLSEXT_ERR_OK)
+		ERR_print_errors(err);
+	if (aia)
+		{
+		OPENSSL_free(host);
+		OPENSSL_free(path);
+		OPENSSL_free(port);
+		X509_email_free(aia);
+		}
+	if (id)
+		OCSP_CERTID_free(id);
+	if (req)
+		OCSP_REQUEST_free(req);
+	if (resp)
+		OCSP_RESPONSE_free(resp);
+	return ret;
+	err:
+	ret = SSL_TLSEXT_ERR_ALERT_FATAL;
+	goto done;
+	}
+#endif
+
 int MAIN(int, char **);
 
+#ifndef OPENSSL_NO_JPAKE
+static char *jpake_secret = NULL;
+#endif
+
 int MAIN(int argc, char *argv[])
 	{
-	X509_STORE *store = NULL;
-	int vflags = 0;
+	X509_VERIFY_PARAM *vpm = NULL;
+	int badarg = 0;
 	short port=PORT;
 	char *CApath=NULL,*CAfile=NULL;
 	unsigned char *context = NULL;
@@ -604,11 +849,9 @@ int MAIN(int argc, char *argv[])
 	int off=0;
 	int no_tmp_rsa=0,no_dhe=0,no_ecdhe=0,nocert=0;
 	int state=0;
-	SSL_METHOD *meth=NULL;
-        int socket_type=SOCK_STREAM;
-#ifndef OPENSSL_NO_ENGINE
+	const SSL_METHOD *meth=NULL;
+	int socket_type=SOCK_STREAM;
 	ENGINE *e=NULL;
-#endif
 	char *inrand=NULL;
 	int s_cert_format = FORMAT_PEM, s_key_format = FORMAT_PEM;
 	char *passarg = NULL, *pass = NULL;
@@ -616,15 +859,18 @@ int MAIN(int argc, char *argv[])
 	int s_dcert_format = FORMAT_PEM, s_dkey_format = FORMAT_PEM;
 	X509 *s_cert = NULL, *s_dcert = NULL;
 	EVP_PKEY *s_key = NULL, *s_dkey = NULL;
+	int no_cache = 0;
 #ifndef OPENSSL_NO_TLSEXT
 	EVP_PKEY *s_key2 = NULL;
 	X509 *s_cert2 = NULL;
 #endif
-
 #ifndef OPENSSL_NO_TLSEXT
         tlsextctx tlsextcbp = {NULL, NULL, SSL_TLSEXT_ERR_ALERT_WARNING};
 #endif
-
+#ifndef OPENSSL_NO_PSK
+	/* by default do not send a PSK identity hint */
+	static char *psk_identity_hint=NULL;
+#endif
 #if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
 	meth=SSLv23_server_method();
 #elif !defined(OPENSSL_NO_SSL3)
@@ -756,14 +1002,16 @@ int MAIN(int argc, char *argv[])
 			if (--argc < 1) goto bad;
 			CApath= *(++argv);
 			}
-		else if (strcmp(*argv,"-crl_check") == 0)
+		else if (strcmp(*argv,"-no_cache") == 0)
+			no_cache = 1;
+		else if (args_verify(&argv, &argc, &badarg, bio_err, &vpm))
 			{
-			vflags |= X509_V_FLAG_CRL_CHECK;
-			}
-		else if (strcmp(*argv,"-crl_check") == 0)
-			{
-			vflags |= X509_V_FLAG_CRL_CHECK|X509_V_FLAG_CRL_CHECK_ALL;
+			if (badarg)
+				goto bad;
+			continue;
 			}
+		else if (strcmp(*argv,"-verify_return_error") == 0)
+			verify_return_error = 1;
 		else if	(strcmp(*argv,"-serverpref") == 0)
 			{ off|=SSL_OP_CIPHER_SERVER_PREFERENCE; }
 		else if	(strcmp(*argv,"-cipher") == 0)
@@ -792,6 +1040,33 @@ int MAIN(int argc, char *argv[])
 #ifndef OPENSSL_NO_TLSEXT
 		else if	(strcmp(*argv,"-tlsextdebug") == 0)
 			s_tlsextdebug=1;
+		else if	(strcmp(*argv,"-status") == 0)
+			s_tlsextstatus=1;
+		else if	(strcmp(*argv,"-status_verbose") == 0)
+			{
+			s_tlsextstatus=1;
+			tlscstatp.verbose = 1;
+			}
+		else if (!strcmp(*argv, "-status_timeout"))
+			{
+			s_tlsextstatus=1;
+                        if (--argc < 1) goto bad;
+			tlscstatp.timeout = atoi(*(++argv));
+			}
+		else if (!strcmp(*argv, "-status_url"))
+			{
+			s_tlsextstatus=1;
+                        if (--argc < 1) goto bad;
+			if (!OCSP_parse_url(*(++argv),
+					&tlscstatp.host,
+					&tlscstatp.port,
+					&tlscstatp.path,
+					&tlscstatp.use_ssl))
+				{
+				BIO_printf(bio_err, "Error parsing URL\n");
+				goto bad;
+				}
+			}
 #endif
 		else if	(strcmp(*argv,"-msg") == 0)
 			{ s_msg=1; }
@@ -811,6 +1086,27 @@ int MAIN(int argc, char *argv[])
 			{ no_dhe=1; }
 		else if	(strcmp(*argv,"-no_ecdhe") == 0)
 			{ no_ecdhe=1; }
+#ifndef OPENSSL_NO_PSK
+                else if (strcmp(*argv,"-psk_hint") == 0)
+			{
+                        if (--argc < 1) goto bad;
+                        psk_identity_hint= *(++argv);
+                        }
+                else if (strcmp(*argv,"-psk") == 0)
+			{
+			size_t i;
+
+			if (--argc < 1) goto bad;
+			psk_key=*(++argv);
+			for (i=0; i<strlen(psk_key); i++)
+				{
+				if (isxdigit((int)psk_key[i]))
+					continue;
+				BIO_printf(bio_err,"Not a hex number '%s'\n",*argv);
+				goto bad;
+				}
+			}
+#endif
 		else if	(strcmp(*argv,"-www") == 0)
 			{ www=1; }
 		else if	(strcmp(*argv,"-WWW") == 0)
@@ -823,6 +1119,8 @@ int MAIN(int argc, char *argv[])
 			{ off|=SSL_OP_NO_SSLv3; }
 		else if	(strcmp(*argv,"-no_tls1") == 0)
 			{ off|=SSL_OP_NO_TLSv1; }
+		else if	(strcmp(*argv,"-no_comp") == 0)
+			{ off|=SSL_OP_NO_COMPRESSION; }
 #ifndef OPENSSL_NO_TLSEXT
 		else if	(strcmp(*argv,"-no_ticket") == 0)
 			{ off|=SSL_OP_NO_TICKET; }
@@ -850,7 +1148,7 @@ int MAIN(int argc, char *argv[])
 		else if (strcmp(*argv,"-mtu") == 0)
 			{
 			if (--argc < 1) goto bad;
-			mtu = atol(*(++argv));
+			socket_mtu = atol(*(++argv));
 			}
 		else if (strcmp(*argv, "-chain") == 0)
 			cert_chain = 1;
@@ -890,6 +1188,14 @@ int MAIN(int argc, char *argv[])
 			if (--argc < 1) goto bad;
 			s_key_file2= *(++argv);
 			}
+			
+#endif
+#if !defined(OPENSSL_NO_JPAKE) && !defined(OPENSSL_NO_PSK)
+		else if (strcmp(*argv,"-jpake") == 0)
+			{
+			if (--argc < 1) goto bad;
+			jpake_secret = *(++argv);
+			}
 #endif
 		else
 			{
@@ -907,6 +1213,26 @@ bad:
 		goto end;
 		}
 
+#if !defined(OPENSSL_NO_JPAKE) && !defined(OPENSSL_NO_PSK)
+	if (jpake_secret)
+		{
+		if (psk_key)
+			{
+			BIO_printf(bio_err,
+				   "Can't use JPAKE and PSK together\n");
+			goto end;
+			}
+		psk_identity = "JPAKE";
+		if (cipher)
+			{
+			BIO_printf(bio_err, "JPAKE sets cipher to PSK\n");
+			goto end;
+			}
+		cipher = "PSK";
+		}
+
+#endif
+
 	SSL_load_error_strings();
 	OpenSSL_add_ssl_algorithms();
 
@@ -969,6 +1295,8 @@ bad:
 			}
 #endif
 		}
+
+
 	if (s_dcert_file)
 		{
 
@@ -1063,8 +1391,10 @@ bad:
 	if (socket_type == SOCK_DGRAM) SSL_CTX_set_read_ahead(ctx, 1);
 
 	if (state) SSL_CTX_set_info_callback(ctx,apps_ssl_info_callback);
-
-	SSL_CTX_sess_set_cache_size(ctx,128);
+	if (no_cache)
+		SSL_CTX_set_session_cache_mode(ctx, SSL_SESS_CACHE_OFF);
+	else
+		SSL_CTX_sess_set_cache_size(ctx,128);
 
 #if 0
 	if (cipher == NULL) cipher=getenv("SSL_CIPHER");
@@ -1085,8 +1415,9 @@ bad:
 		ERR_print_errors(bio_err);
 		/* goto end; */
 		}
-	store = SSL_CTX_get_cert_store(ctx);
-	X509_STORE_set_flags(store, vflags);
+	if (vpm)
+		SSL_CTX_set1_param(ctx, vpm);
+
 #ifndef OPENSSL_NO_TLSEXT
 	if (s_cert2)
 		{
@@ -1122,28 +1453,28 @@ bad:
 		if (bugs) SSL_CTX_set_options(ctx2,SSL_OP_ALL);
 		if (hack) SSL_CTX_set_options(ctx2,SSL_OP_NETSCAPE_DEMO_CIPHER_CHANGE_BUG);
 		SSL_CTX_set_options(ctx2,off);
-
 		/* DTLS: partial reads end up discarding unread UDP bytes :-( 
 		 * Setting read ahead solves this problem.
 		 */
 		if (socket_type == SOCK_DGRAM) SSL_CTX_set_read_ahead(ctx2, 1);
 
-
 		if (state) SSL_CTX_set_info_callback(ctx2,apps_ssl_info_callback);
 
-		SSL_CTX_sess_set_cache_size(ctx2,128);
+		if (no_cache)
+			SSL_CTX_set_session_cache_mode(ctx2,SSL_SESS_CACHE_OFF);
+		else
+			SSL_CTX_sess_set_cache_size(ctx2,128);
 
 		if ((!SSL_CTX_load_verify_locations(ctx2,CAfile,CApath)) ||
 			(!SSL_CTX_set_default_verify_paths(ctx2)))
 			{
 			ERR_print_errors(bio_err);
 			}
-		store = SSL_CTX_get_cert_store(ctx2);
-		X509_STORE_set_flags(store, vflags);
+		if (vpm)
+			SSL_CTX_set1_param(ctx2, vpm);
 		}
 #endif 
 
-
 #ifndef OPENSSL_NO_DH
 	if (!no_dhe)
 		{
@@ -1219,10 +1550,10 @@ bad:
 		else
 			{
 			BIO_printf(bio_s_out,"Using default temp ECDH parameters\n");
-			ecdh = EC_KEY_new_by_curve_name(NID_sect163r2);
+			ecdh = EC_KEY_new_by_curve_name(NID_X9_62_prime256v1);
 			if (ecdh == NULL) 
 				{
-				BIO_printf(bio_err, "unable to create curve (sect163r2)\n");
+				BIO_printf(bio_err, "unable to create curve (nistp256)\n");
 				goto end;
 				}
 			}
@@ -1257,7 +1588,7 @@ bad:
 #ifndef OPENSSL_NO_TLSEXT
 		if (ctx2) 
 			SSL_CTX_set_tmp_rsa_callback(ctx2,tmp_rsa_cb);
-#endif	
+#endif		
 		}
 #else
 	if (!no_tmp_rsa && SSL_CTX_need_tmp_RSA(ctx))
@@ -1290,11 +1621,34 @@ bad:
 #endif
 #endif
 
-	if (cipher != NULL)
-		if(!SSL_CTX_set_cipher_list(ctx,cipher)) {
-		BIO_printf(bio_err,"error setting cipher list\n");
+#ifndef OPENSSL_NO_PSK
+#ifdef OPENSSL_NO_JPAKE
+	if (psk_key != NULL)
+#else
+	if (psk_key != NULL || jpake_secret)
+#endif
+		{
+		if (s_debug)
+			BIO_printf(bio_s_out, "PSK key given or JPAKE in use, setting server callback\n");
+		SSL_CTX_set_psk_server_callback(ctx, psk_server_cb);
+		}
+
+	if (!SSL_CTX_use_psk_identity_hint(ctx, psk_identity_hint))
+		{
+		BIO_printf(bio_err,"error setting PSK identity hint to context\n");
 		ERR_print_errors(bio_err);
 		goto end;
+		}
+#endif
+
+	if (cipher != NULL)
+		{
+		if(!SSL_CTX_set_cipher_list(ctx,cipher))
+			{
+			BIO_printf(bio_err,"error setting cipher list\n");
+			ERR_print_errors(bio_err);
+			goto end;
+			}
 #ifndef OPENSSL_NO_TLSEXT
 		if (ctx2 && !SSL_CTX_set_cipher_list(ctx2,cipher))
 			{
@@ -1303,11 +1657,15 @@ bad:
 			goto end;
 			}
 #endif
-	}
+		}
 	SSL_CTX_set_verify(ctx,s_server_verify,verify_callback);
 	SSL_CTX_set_session_id_context(ctx,(void*)&s_server_session_id_context,
 		sizeof s_server_session_id_context);
 
+	/* Set DTLS cookie generation and verification callbacks */
+	SSL_CTX_set_cookie_generate_cb(ctx, generate_cookie_callback);
+	SSL_CTX_set_cookie_verify_cb(ctx, verify_cookie_callback);
+
 #ifndef OPENSSL_NO_TLSEXT
 	if (ctx2)
 		{
@@ -1322,6 +1680,7 @@ bad:
 		SSL_CTX_set_tlsext_servername_arg(ctx, &tlsextcbp);
 		}
 #endif
+
 	if (CAfile != NULL)
 		{
 		SSL_CTX_set_client_CA_list(ctx,SSL_load_client_CA_file(CAfile));
@@ -1330,7 +1689,9 @@ bad:
 			SSL_CTX_set_client_CA_list(ctx2,SSL_load_client_CA_file(CAfile));
 #endif
 		}
+
 	BIO_printf(bio_s_out,"ACCEPT\n");
+	(void)BIO_flush(bio_s_out);
 	if (www)
 		do_server(port,socket_type,&accept_socket,www_body, context);
 	else
@@ -1401,8 +1762,11 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 	unsigned long l;
 	SSL *con=NULL;
 	BIO *sbio;
-#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE)
+	struct timeval timeout;
+#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE) || defined(OPENSSL_SYS_BEOS_R5)
 	struct timeval tv;
+#else
+	struct timeval *timeoutp;
 #endif
 
 	if ((buf=OPENSSL_malloc(bufsize)) == NULL)
@@ -1430,6 +1794,12 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 		SSL_set_tlsext_debug_callback(con, tlsext_cb);
 		SSL_set_tlsext_debug_arg(con, bio_s_out);
 		}
+	if (s_tlsextstatus)
+		{
+		SSL_CTX_set_tlsext_status_cb(ctx, cert_status_cb);
+		tlscstatp.err = bio_err;
+		SSL_CTX_set_tlsext_status_arg(ctx, &tlscstatp);
+		}
 #endif
 #ifndef OPENSSL_NO_KRB5
 		if ((con->kssl_ctx = kssl_ctx_new()) != NULL)
@@ -1445,14 +1815,18 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 						 strlen((char *)context));
 	}
 	SSL_clear(con);
+#if 0
+#ifdef TLSEXT_TYPE_opaque_prf_input
+	SSL_set_tlsext_opaque_prf_input(con, "Test server", 11);
+#endif
+#endif
 
 	if (SSL_version(con) == DTLS1_VERSION)
 		{
-		struct timeval timeout;
 
 		sbio=BIO_new_dgram(s,BIO_NOCLOSE);
 
-		if ( enable_timeouts)
+		if (enable_timeouts)
 			{
 			timeout.tv_sec = 0;
 			timeout.tv_usec = DGRAM_RCV_TIMEOUT;
@@ -1463,11 +1837,10 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 			BIO_ctrl(sbio, BIO_CTRL_DGRAM_SET_SEND_TIMEOUT, 0, &timeout);
 			}
 
-		
-		if ( mtu > 0)
+		if (socket_mtu > 28)
 			{
 			SSL_set_options(con, SSL_OP_NO_QUERY_MTU);
-			SSL_set_mtu(con, mtu);
+			SSL_set_mtu(con, socket_mtu - 28);
 			}
 		else
 			/* want to do MTU discovery */
@@ -1486,6 +1859,11 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 		test=BIO_new(BIO_f_nbio_test());
 		sbio=BIO_push(test,sbio);
 		}
+#ifndef OPENSSL_NO_JPAKE
+	if(jpake_secret)
+		jpake_server_auth(bio_s_out, sbio, jpake_secret);
+#endif
+
 	SSL_set_bio(con,sbio,sbio);
 	SSL_set_accept_state(con);
 	/* SSL_set_fd(con,s); */
@@ -1521,10 +1899,10 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 		if (!read_from_sslcon)
 			{
 			FD_ZERO(&readfds);
-#if !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_NETWARE)
-			FD_SET(fileno(stdin),&readfds);
+#if !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_NETWARE) && !defined(OPENSSL_SYS_BEOS_R5)
+			openssl_fdset(fileno(stdin),&readfds);
 #endif
-			FD_SET(s,&readfds);
+			openssl_fdset(s,&readfds);
 			/* Note: under VMS with SOCKETSHR the second parameter is
 			 * currently of type (int *) whereas under other systems
 			 * it is (void *) if you don't have a cast it will choke
@@ -1543,8 +1921,31 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 			if((i < 0) || (!i && !_kbhit() ) )continue;
 			if(_kbhit())
 				read_from_terminal = 1;
+#elif defined(OPENSSL_SYS_BEOS_R5)
+			/* Under BeOS-R5 the situation is similar to DOS */
+			tv.tv_sec = 1;
+			tv.tv_usec = 0;
+			(void)fcntl(fileno(stdin), F_SETFL, O_NONBLOCK);
+			i=select(width,(void *)&readfds,NULL,NULL,&tv);
+			if ((i < 0) || (!i && read(fileno(stdin), buf, 0) < 0))
+				continue;
+			if (read(fileno(stdin), buf, 0) >= 0)
+				read_from_terminal = 1;
+			(void)fcntl(fileno(stdin), F_SETFL, 0);
 #else
-			i=select(width,(void *)&readfds,NULL,NULL,NULL);
+			if ((SSL_version(con) == DTLS1_VERSION) &&
+				DTLSv1_get_timeout(con, &timeout))
+				timeoutp = &timeout;
+			else
+				timeoutp = NULL;
+
+			i=select(width,(void *)&readfds,NULL,NULL,timeoutp);
+
+			if ((SSL_version(con) == DTLS1_VERSION) && DTLSv1_handle_timeout(con) > 0)
+				{
+				BIO_printf(bio_err,"TIMEOUT occured\n");
+				}
+
 			if (i <= 0) continue;
 			if (FD_ISSET(fileno(stdin),&readfds))
 				read_from_terminal = 1;
@@ -1558,7 +1959,7 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 				{
 				int j, lf_num;
 
-				i=read(fileno(stdin), buf, bufsize/2);
+				i=raw_read_stdin(buf, bufsize/2);
 				lf_num = 0;
 				/* both loops are skipped when i <= 0 */
 				for (j = 0; j < i; j++)
@@ -1577,7 +1978,7 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 				assert(lf_num == 0);
 				}
 			else
-				i=read(fileno(stdin),buf,bufsize);
+				i=raw_read_stdin(buf,bufsize);
 			if (!s_quiet)
 				{
 				if ((i <= 0) || (buf[0] == 'Q'))
@@ -1597,6 +1998,7 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 					ret= -11;*/
 					goto err;
 					}
+
 				if ((buf[0] == 'r') && 
 					((buf[1] == '\n') || (buf[1] == '\r')))
 					{
@@ -1693,7 +2095,7 @@ again:
 #ifdef CHARSET_EBCDIC
 					ascii2ebcdic(buf,buf,i);
 #endif
-					write(fileno(stdout),buf,
+					raw_write_stdout(buf,
 						(unsigned int)i);
 					if (SSL_pending(con)) goto again;
 					break;
@@ -1717,13 +2119,16 @@ again:
 			}
 		}
 err:
-	BIO_printf(bio_s_out,"shutting down SSL\n");
+	if (con != NULL)
+		{
+		BIO_printf(bio_s_out,"shutting down SSL\n");
 #if 1
-	SSL_set_shutdown(con,SSL_SENT_SHUTDOWN|SSL_RECEIVED_SHUTDOWN);
+		SSL_set_shutdown(con,SSL_SENT_SHUTDOWN|SSL_RECEIVED_SHUTDOWN);
 #else
-	SSL_shutdown(con);
+		SSL_shutdown(con);
 #endif
-	if (con != NULL) SSL_free(con);
+		SSL_free(con);
+		}
 	BIO_printf(bio_s_out,"CONNECTION CLOSED\n");
 	if (buf != NULL)
 		{
@@ -1845,9 +2250,8 @@ static int www_body(char *hostname, int s, unsigned char *context)
 	char *buf=NULL;
 	int ret=1;
 	int i,j,k,blank,dot;
-	struct stat st_buf;
 	SSL *con;
-	SSL_CIPHER *c;
+	const SSL_CIPHER *c;
 	BIO *io,*ssl_bio,*sbio;
 	long total_bytes;
 
@@ -2117,14 +2521,7 @@ static int www_body(char *hostname, int s, unsigned char *context)
 #endif
 
 			/* if a directory, do the index thang */
-			if (stat(p,&st_buf) < 0)
-				{
-				BIO_puts(io,text);
-				BIO_printf(io,"Error accessing '%s'\r\n",p);
-				ERR_print_errors(io);
-				break;
-				}
-			if (S_ISDIR(st_buf.st_mode))
+			if (app_isdir(p)>0)
 				{
 #if 0 /* must check buffer size */
 				strcat(p,"/index.html");

apps/s_socket.c

@@ -62,6 +62,12 @@
 #include <errno.h>
 #include <signal.h>
 
+#ifdef FLAT_INC
+#include "e_os2.h"
+#else
+#include "../e_os2.h"
+#endif
+
 /* With IPv6, it looks like Digital has mixed up the proper order of
    recursive header file inclusion, resulting in the compiler complaining
    that u_int isn't defined, but only if _POSIX_C_SOURCE is defined, which
@@ -231,13 +237,11 @@ static int ssl_sock_init(void)
 int init_client(int *sock, char *host, int port, int type)
 	{
 	unsigned char ip[4];
-	short p=0;
 
 	if (!host_ip(host,&(ip[0])))
 		{
 		return(0);
 		}
-	if (p != 0) port=p;
 	return(init_client_ip(sock,ip,port,type));
 	}
 
@@ -266,7 +270,7 @@ static int init_client_ip(int *sock, unsigned char ip[4], int port, int type)
 			
 	if (s == INVALID_SOCKET) { perror("socket"); return(0); }
 
-#ifndef OPENSSL_SYS_MPE
+#if defined(SO_KEEPALIVE) && !defined(OPENSSL_SYS_MPE)
 	if (type == SOCK_STREAM)
 		{
 		i=0;
@@ -276,7 +280,7 @@ static int init_client_ip(int *sock, unsigned char ip[4], int port, int type)
 #endif
 
 	if (connect(s,(struct sockaddr *)&them,sizeof(them)) == -1)
-		{ close(s); perror("connect"); return(0); }
+		{ closesocket(s); perror("connect"); return(0); }
 	*sock=s;
 	return(1);
 	}
@@ -285,7 +289,7 @@ int do_server(int port, int type, int *ret, int (*cb)(char *hostname, int s, uns
 	{
 	int sock;
 	char *name = NULL;
-	int accept_socket;
+	int accept_socket = 0;
 	int i;
 
 	if (!init_server(&accept_socket,port,type)) return(0);

apps/s_time.c

@@ -85,54 +85,6 @@
 #include OPENSSL_UNISTD
 #endif
 
-#if !defined(OPENSSL_SYS_NETWARE) && !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_VXWORKS) && (!defined(OPENSSL_SYS_VMS) || defined(__DECC))
-#define TIMES
-#endif
-
-#ifndef _IRIX
-#include <time.h>
-#endif
-#ifdef TIMES
-#include <sys/types.h>
-#include <sys/times.h>
-#endif
-
-/* Depending on the VMS version, the tms structure is perhaps defined.
-   The __TMS macro will show if it was.  If it wasn't defined, we should
-   undefine TIMES, since that tells the rest of the program how things
-   should be handled.				-- Richard Levitte */
-#if defined(OPENSSL_SYS_VMS_DECC) && !defined(__TMS)
-#undef TIMES
-#endif
-
-#if !defined(TIMES) && !defined(OPENSSL_SYS_VXWORKS) && !defined(OPENSSL_SYS_NETWARE)
-#include <sys/timeb.h>
-#endif
-
-#if defined(sun) || defined(__ultrix)
-#define _POSIX_SOURCE
-#include <limits.h>
-#include <sys/param.h>
-#endif
-
-/* The following if from times(3) man page.  It may need to be changed
-*/
-#ifndef HZ
-# ifdef _SC_CLK_TCK
-#  define HZ ((double)sysconf(_SC_CLK_TCK))
-# else
-#  ifndef CLK_TCK
-#   ifndef _BSD_CLK_TCK_ /* FreeBSD hack */
-#    define HZ	100.0
-#   else /* _BSD_CLK_TCK_ */
-#    define HZ ((double)_BSD_CLK_TCK_)
-#   endif
-#  else /* CLK_TCK */
-#   define HZ ((double)CLK_TCK)
-#  endif
-# endif
-#endif
-
 #undef PROG
 #define PROG s_time_main
 
@@ -177,7 +129,7 @@ static char *tm_cipher=NULL;
 static int tm_verify = SSL_VERIFY_NONE;
 static int maxTime = SECONDS;
 static SSL_CTX *tm_ctx=NULL;
-static SSL_METHOD *s_time_meth=NULL;
+static const SSL_METHOD *s_time_meth=NULL;
 static char *s_www_path=NULL;
 static long bytes_read=0; 
 static int st_bugs=0;
@@ -372,63 +324,8 @@ bad:
 
 static double tm_Time_F(int s)
 	{
-	static double ret;
-#ifdef TIMES
-	static struct tms tstart,tend;
-
-	if(s == START) {
-		times(&tstart);
-		return(0);
-	} else {
-		times(&tend);
-		ret=((double)(tend.tms_utime-tstart.tms_utime))/HZ;
-		return((ret == 0.0)?1e-6:ret);
+	return app_tminterval(s,1);
 	}
-#elif defined(OPENSSL_SYS_NETWARE)
-    static clock_t tstart,tend;
-
-    if (s == START)
-    {
-        tstart=clock();
-        return(0);
-    }
-    else
-    {
-        tend=clock();
-        ret=(double)((double)(tend)-(double)(tstart));
-        return((ret < 0.001)?0.001:ret);
-    }
-#elif defined(OPENSSL_SYS_VXWORKS)
-        {
-	static unsigned long tick_start, tick_end;
-
-	if( s == START )
-		{
-		tick_start = tickGet();
-		return 0;
-		}
-	else
-		{
-		tick_end = tickGet();
-		ret = (double)(tick_end - tick_start) / (double)sysClkRateGet();
-		return((ret == 0.0)?1e-6:ret);
-		}
-        }
-#else /* !times() */
-	static struct timeb tstart,tend;
-	long i;
-
-	if(s == START) {
-		ftime(&tstart);
-		return(0);
-	} else {
-		ftime(&tend);
-		i=(long)tend.millitm-(long)tstart.millitm;
-		ret=((double)(tend.time-tstart.time))+((double)i)/1000.0;
-		return((ret == 0.0)?1e-6:ret);
-	}
-#endif
-}
 
 /***********************************************************************
  * MAIN - main processing area for client
@@ -704,7 +601,7 @@ static SSL *doConnection(SSL *scon)
 			i=SSL_get_fd(serverCon);
 			width=i+1;
 			FD_ZERO(&readfds);
-			FD_SET(i,&readfds);
+			openssl_fdset(i,&readfds);
 			/* Note: under VMS with SOCKETSHR the 2nd parameter
 			 * is currently of type (int *) whereas under other
 			 * systems it is (void *) if you don't have a cast it

apps/smime.c

@@ -1,5 +1,5 @@
 /* smime.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
+/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
  * project.
  */
 /* ====================================================================
@@ -73,11 +73,14 @@ static int save_certs(char *signerfile, STACK_OF(X509) *signers);
 static int smime_cb(int ok, X509_STORE_CTX *ctx);
 
 #define SMIME_OP	0x10
+#define SMIME_IP	0x20
+#define SMIME_SIGNERS	0x40
 #define SMIME_ENCRYPT	(1 | SMIME_OP)
-#define SMIME_DECRYPT	2
-#define SMIME_SIGN	(3 | SMIME_OP)
-#define SMIME_VERIFY	4
-#define SMIME_PK7OUT	5
+#define SMIME_DECRYPT	(2 | SMIME_IP)
+#define SMIME_SIGN	(3 | SMIME_OP | SMIME_SIGNERS)
+#define SMIME_VERIFY	(4 | SMIME_IP)
+#define SMIME_PK7OUT	(5 | SMIME_IP | SMIME_OP)
+#define SMIME_RESIGN	(6 | SMIME_IP | SMIME_OP | SMIME_SIGNERS)
 
 int MAIN(int, char **);
 
@@ -90,6 +93,7 @@ int MAIN(int argc, char **argv)
 	const char *inmode = "r", *outmode = "w";
 	char *infile = NULL, *outfile = NULL;
 	char *signerfile = NULL, *recipfile = NULL;
+	STACK_OF(OPENSSL_STRING) *sksigners = NULL, *skkeys = NULL;
 	char *certfile = NULL, *keyfile = NULL, *contfile=NULL;
 	const EVP_CIPHER *cipher = NULL;
 	PKCS7 *p7 = NULL;
@@ -105,6 +109,8 @@ int MAIN(int argc, char **argv)
 	char *passargin = NULL, *passin = NULL;
 	char *inrand = NULL;
 	int need_rand = 0;
+	int indef = 0;
+	const EVP_MD *sign_md = NULL;
 	int informat = FORMAT_SMIME, outformat = FORMAT_SMIME;
         int keyform = FORMAT_PEM;
 #ifndef OPENSSL_NO_ENGINE
@@ -135,6 +141,8 @@ int MAIN(int argc, char **argv)
 			operation = SMIME_DECRYPT;
 		else if (!strcmp (*args, "-sign"))
 			operation = SMIME_SIGN;
+		else if (!strcmp (*args, "-resign"))
+			operation = SMIME_RESIGN;
 		else if (!strcmp (*args, "-verify"))
 			operation = SMIME_VERIFY;
 		else if (!strcmp (*args, "-pk7out"))
@@ -193,205 +201,209 @@ int MAIN(int argc, char **argv)
 				flags |= PKCS7_BINARY;
 		else if (!strcmp (*args, "-nosigs"))
 				flags |= PKCS7_NOSIGS;
+		else if (!strcmp (*args, "-stream"))
+				indef = 1;
+		else if (!strcmp (*args, "-indef"))
+				indef = 1;
+		else if (!strcmp (*args, "-noindef"))
+				indef = 0;
 		else if (!strcmp (*args, "-nooldmime"))
 				flags |= PKCS7_NOOLDMIMETYPE;
 		else if (!strcmp (*args, "-crlfeol"))
 				flags |= PKCS7_CRLFEOL;
 		else if (!strcmp(*args,"-rand"))
 			{
-			if (args[1])
-				{
-				args++;
-				inrand = *args;
-				}
-			else
-				badarg = 1;
+			if (!args[1])
+				goto argerr;
+			args++;
+			inrand = *args;
 			need_rand = 1;
 			}
 #ifndef OPENSSL_NO_ENGINE
 		else if (!strcmp(*args,"-engine"))
 			{
-			if (args[1])
-				{
-				args++;
-				engine = *args;
-				}
-			else badarg = 1;
+			if (!args[1])
+				goto argerr;
+			engine = *++args;
 			}
 #endif
 		else if (!strcmp(*args,"-passin"))
 			{
-			if (args[1])
-				{
-				args++;
-				passargin = *args;
-				}
-			else
-				badarg = 1;
+			if (!args[1])
+				goto argerr;
+			passargin = *++args;
 			}
 		else if (!strcmp (*args, "-to"))
 			{
-			if (args[1])
-				{
-				args++;
-				to = *args;
-				}
-			else
-				badarg = 1;
+			if (!args[1])
+				goto argerr;
+			to = *++args;
 			}
 		else if (!strcmp (*args, "-from"))
 			{
-			if (args[1])
-				{
-				args++;
-				from = *args;
-				}
-			else badarg = 1;
+			if (!args[1])
+				goto argerr;
+			from = *++args;
 			}
 		else if (!strcmp (*args, "-subject"))
 			{
-			if (args[1])
-				{
-				args++;
-				subject = *args;
-				}
-			else
-				badarg = 1;
+			if (!args[1])
+				goto argerr;
+			subject = *++args;
 			}
 		else if (!strcmp (*args, "-signer"))
 			{
-			if (args[1])
+			if (!args[1])
+				goto argerr;
+			/* If previous -signer argument add signer to list */
+
+			if (signerfile)
 				{
-				args++;
-				signerfile = *args;
+				if (!sksigners)
+					sksigners = sk_OPENSSL_STRING_new_null();
+				sk_OPENSSL_STRING_push(sksigners, signerfile);
+				if (!keyfile)
+					keyfile = signerfile;
+				if (!skkeys)
+					skkeys = sk_OPENSSL_STRING_new_null();
+				sk_OPENSSL_STRING_push(skkeys, keyfile);
+				keyfile = NULL;
 				}
-			else
-				badarg = 1;
+			signerfile = *++args;
 			}
 		else if (!strcmp (*args, "-recip"))
 			{
-			if (args[1])
+			if (!args[1])
+				goto argerr;
+			recipfile = *++args;
+			}
+		else if (!strcmp (*args, "-md"))
+			{
+			if (!args[1])
+				goto argerr;
+			sign_md = EVP_get_digestbyname(*++args);
+			if (sign_md == NULL)
 				{
-				args++;
-				recipfile = *args;
+				BIO_printf(bio_err, "Unknown digest %s\n",
+							*args);
+				goto argerr;
 				}
-			else badarg = 1;
 			}
 		else if (!strcmp (*args, "-inkey"))
 			{
-			if (args[1])
+			if (!args[1])	
+				goto argerr;
+			/* If previous -inkey arument add signer to list */
+			if (keyfile)
 				{
-				args++;
-				keyfile = *args;
+				if (!signerfile)
+					{
+					BIO_puts(bio_err, "Illegal -inkey without -signer\n");
+					goto argerr;
+					}
+				if (!sksigners)
+					sksigners = sk_OPENSSL_STRING_new_null();
+				sk_OPENSSL_STRING_push(sksigners, signerfile);
+				signerfile = NULL;
+				if (!skkeys)
+					skkeys = sk_OPENSSL_STRING_new_null();
+				sk_OPENSSL_STRING_push(skkeys, keyfile);
 				}
-			else
-				badarg = 1;
-		}
+			keyfile = *++args;
+			}
 		else if (!strcmp (*args, "-keyform"))
 			{
-			if (args[1])
-				{
-				args++;
-				keyform = str2fmt(*args);
-				}
-			else
-				badarg = 1;
+			if (!args[1])
+				goto argerr;
+			keyform = str2fmt(*++args);
 			}
 		else if (!strcmp (*args, "-certfile"))
 			{
-			if (args[1])
-				{
-				args++;
-				certfile = *args;
-				}
-			else
-				badarg = 1;
+			if (!args[1])
+				goto argerr;
+			certfile = *++args;
 			}
 		else if (!strcmp (*args, "-CAfile"))
 			{
-			if (args[1])
-				{
-				args++;
-				CAfile = *args;
-				}
-			else
-				badarg = 1;
+			if (!args[1])
+				goto argerr;
+			CAfile = *++args;
 			}
 		else if (!strcmp (*args, "-CApath"))
 			{
-			if (args[1])
-				{
-				args++;
-				CApath = *args;
-				}
-			else
-				badarg = 1;
+			if (!args[1])
+				goto argerr;
+			CApath = *++args;
 			}
 		else if (!strcmp (*args, "-in"))
 			{
-			if (args[1])
-				{
-				args++;
-				infile = *args;
-				}
-			else
-				badarg = 1;
+			if (!args[1])
+				goto argerr;
+			infile = *++args;
 			}
 		else if (!strcmp (*args, "-inform"))
 			{
-			if (args[1])
-				{
-				args++;
-				informat = str2fmt(*args);
-				}
-			else
-				badarg = 1;
+			if (!args[1])
+				goto argerr;
+			informat = str2fmt(*++args);
 			}
 		else if (!strcmp (*args, "-outform"))
 			{
-			if (args[1])
-				{
-				args++;
-				outformat = str2fmt(*args);
-				}
-			else
-				badarg = 1;
+			if (!args[1])
+				goto argerr;
+			outformat = str2fmt(*++args);
 			}
 		else if (!strcmp (*args, "-out"))
 			{
-			if (args[1])
-				{
-				args++;
-				outfile = *args;
-				}
-			else
-				badarg = 1;
+			if (!args[1])
+				goto argerr;
+			outfile = *++args;
 			}
 		else if (!strcmp (*args, "-content"))
 			{
-			if (args[1])
-				{
-				args++;
-				contfile = *args;
-				}
-			else
-				badarg = 1;
+			if (!args[1])
+				goto argerr;
+			contfile = *++args;
 			}
 		else if (args_verify(&args, NULL, &badarg, bio_err, &vpm))
 			continue;
-		else
+		else if ((cipher = EVP_get_cipherbyname(*args + 1)) == NULL)
 			badarg = 1;
 		args++;
 		}
 
-
-	if (operation == SMIME_SIGN)
+	if (!(operation & SMIME_SIGNERS) && (skkeys || sksigners))
 		{
-		if (!signerfile)
+		BIO_puts(bio_err, "Multiple signers or keys not allowed\n");
+		goto argerr;
+		}
+
+	if (operation & SMIME_SIGNERS)
+		{
+		/* Check to see if any final signer needs to be appended */
+		if (keyfile && !signerfile)
+			{
+			BIO_puts(bio_err, "Illegal -inkey without -signer\n");
+			goto argerr;
+			}
+		if (signerfile)
+			{
+			if (!sksigners)
+				sksigners = sk_OPENSSL_STRING_new_null();
+			sk_OPENSSL_STRING_push(sksigners, signerfile);
+			if (!skkeys)
+				skkeys = sk_OPENSSL_STRING_new_null();
+			if (!keyfile)
+				keyfile = signerfile;
+			sk_OPENSSL_STRING_push(skkeys, keyfile);
+			}
+		if (!sksigners)
 			{
 			BIO_printf(bio_err, "No signer certificate specified\n");
 			badarg = 1;
 			}
+		signerfile = NULL;
+		keyfile = NULL;
 		need_rand = 1;
 		}
 	else if (operation == SMIME_DECRYPT)
@@ -416,6 +428,7 @@ int MAIN(int argc, char **argv)
 
 	if (badarg)
 		{
+		argerr:
 		BIO_printf (bio_err, "Usage smime [options] cert.pem ...\n");
 		BIO_printf (bio_err, "where options are\n");
 		BIO_printf (bio_err, "-encrypt       encrypt message\n");
@@ -499,13 +512,11 @@ int MAIN(int argc, char **argv)
 
 	ret = 2;
 
-	if (operation != SMIME_SIGN)
+	if (!(operation & SMIME_SIGNERS))
 		flags &= ~PKCS7_DETACHED;
 
 	if (operation & SMIME_OP)
 		{
-		if (flags & PKCS7_BINARY)
-			inmode = "rb";
 		if (outformat == FORMAT_ASN1)
 			outmode = "wb";
 		}
@@ -513,9 +524,18 @@ int MAIN(int argc, char **argv)
 		{
 		if (flags & PKCS7_BINARY)
 			outmode = "wb";
+		}
+
+	if (operation & SMIME_IP)
+		{
 		if (informat == FORMAT_ASN1)
 			inmode = "rb";
 		}
+	else
+		{
+		if (flags & PKCS7_BINARY)
+			inmode = "rb";
+		}
 
 	if (operation == SMIME_ENCRYPT)
 		{
@@ -545,26 +565,11 @@ int MAIN(int argc, char **argv)
 			}
 		}
 
-	if (signerfile && (operation == SMIME_SIGN))
-		{
-		if (!(signer = load_cert(bio_err,signerfile,FORMAT_PEM, NULL,
-			e, "signer certificate")))
-			{
-#if 0			/* An appropri message has already been printed */
-			BIO_printf(bio_err, "Can't read signer certificate file %s\n", signerfile);
-#endif
-			goto end;
-			}
-		}
-
 	if (certfile)
 		{
 		if (!(other = load_certs(bio_err,certfile,FORMAT_PEM, NULL,
 			e, "certificate file")))
 			{
-#if 0			/* An appropriate message has already been printed */
-			BIO_printf(bio_err, "Can't read certificate file %s\n", certfile);
-#endif
 			ERR_print_errors(bio_err);
 			goto end;
 			}
@@ -575,9 +580,6 @@ int MAIN(int argc, char **argv)
 		if (!(recip = load_cert(bio_err,recipfile,FORMAT_PEM,NULL,
 			e, "recipient certificate file")))
 			{
-#if 0			/* An appropriate message has alrady been printed */
-			BIO_printf(bio_err, "Can't read recipient certificate file %s\n", recipfile);
-#endif
 			ERR_print_errors(bio_err);
 			goto end;
 			}
@@ -615,50 +617,7 @@ int MAIN(int argc, char **argv)
 	else
 		in = BIO_new_fp(stdin, BIO_NOCLOSE);
 
-	if (outfile)
-		{
-		if (!(out = BIO_new_file(outfile, outmode)))
-			{
-			BIO_printf (bio_err,
-				 "Can't open output file %s\n", outfile);
-			goto end;
-			}
-		}
-	else
-		{
-		out = BIO_new_fp(stdout, BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-		{
-		    BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-		    out = BIO_push(tmpbio, out);
-		}
-#endif
-		}
-
-	if (operation == SMIME_VERIFY)
-		{
-		if (!(store = setup_verify(bio_err, CAfile, CApath)))
-			goto end;
-		X509_STORE_set_verify_cb_func(store, smime_cb);
-		if (vpm)
-			X509_STORE_set1_param(store, vpm);
-		}
-
-
-	ret = 3;
-
-	if (operation == SMIME_ENCRYPT)
-		p7 = PKCS7_encrypt(encerts, in, cipher, flags);
-	else if (operation == SMIME_SIGN)
-		{
-		/* If detached data and SMIME output enable partial
-		 * signing.
-		 */
-		if ((flags & PKCS7_DETACHED) && (outformat == FORMAT_SMIME))
-			flags |= PKCS7_STREAM;
-		p7 = PKCS7_sign(signer, key, other, in, flags);
-		}
-	else
+	if (operation & SMIME_IP)
 		{
 		if (informat == FORMAT_SMIME) 
 			p7 = SMIME_read_PKCS7(in, &indata);
@@ -688,6 +647,94 @@ int MAIN(int argc, char **argv)
 			}
 		}
 
+	if (outfile)
+		{
+		if (!(out = BIO_new_file(outfile, outmode)))
+			{
+			BIO_printf (bio_err,
+				 "Can't open output file %s\n", outfile);
+			goto end;
+			}
+		}
+	else
+		{
+		out = BIO_new_fp(stdout, BIO_NOCLOSE);
+#ifdef OPENSSL_SYS_VMS
+		{
+		    BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+		    out = BIO_push(tmpbio, out);
+		}
+#endif
+		}
+
+	if (operation == SMIME_VERIFY)
+		{
+		if (!(store = setup_verify(bio_err, CAfile, CApath)))
+			goto end;
+		X509_STORE_set_verify_cb(store, smime_cb);
+		if (vpm)
+			X509_STORE_set1_param(store, vpm);
+		}
+
+
+	ret = 3;
+
+	if (operation == SMIME_ENCRYPT)
+		{
+		if (indef)
+			flags |= PKCS7_STREAM;
+		p7 = PKCS7_encrypt(encerts, in, cipher, flags);
+		}
+	else if (operation & SMIME_SIGNERS)
+		{
+		int i;
+		/* If detached data content we only enable streaming if
+		 * S/MIME output format.
+		 */
+		if (operation == SMIME_SIGN)
+			{
+			if (flags & PKCS7_DETACHED)
+				{
+				if (outformat == FORMAT_SMIME)
+					flags |= PKCS7_STREAM;
+				}
+			else if (indef)
+				flags |= PKCS7_STREAM;
+			flags |= PKCS7_PARTIAL;
+			p7 = PKCS7_sign(NULL, NULL, other, in, flags);
+			if (!p7)
+				goto end;
+			}
+		else
+			flags |= PKCS7_REUSE_DIGEST;
+		for (i = 0; i < sk_OPENSSL_STRING_num(sksigners); i++)
+			{
+			signerfile = sk_OPENSSL_STRING_value(sksigners, i);
+			keyfile = sk_OPENSSL_STRING_value(skkeys, i);
+			signer = load_cert(bio_err, signerfile,FORMAT_PEM, NULL,
+					e, "signer certificate");
+			if (!signer)
+				goto end;
+			key = load_key(bio_err, keyfile, keyform, 0, passin, e,
+			       "signing key file");
+			if (!key)
+				goto end;
+			if (!PKCS7_sign_add_signer(p7, signer, key,
+						sign_md, flags))
+				goto end;
+			X509_free(signer);
+			signer = NULL;
+			EVP_PKEY_free(key);
+			key = NULL;
+			}
+		/* If not streaming or resigning finalize structure */
+		if ((operation == SMIME_SIGN) && !(flags & PKCS7_STREAM))
+			{
+			if (!PKCS7_final(p7, in, flags))
+				goto end;
+			}
+		}
+
 	if (!p7)
 		{
 		BIO_printf(bio_err, "Error creating PKCS#7 structure\n");
@@ -734,11 +781,16 @@ int MAIN(int argc, char **argv)
 		if (subject)
 			BIO_printf(out, "Subject: %s\n", subject);
 		if (outformat == FORMAT_SMIME) 
-			SMIME_write_PKCS7(out, p7, in, flags);
+			{
+			if (operation == SMIME_RESIGN)
+				SMIME_write_PKCS7(out, p7, indata, flags);
+			else
+				SMIME_write_PKCS7(out, p7, in, flags);
+			}
 		else if (outformat == FORMAT_PEM) 
-			PEM_write_bio_PKCS7(out,p7);
+			PEM_write_bio_PKCS7_stream(out, p7, in, flags);
 		else if (outformat == FORMAT_ASN1) 
-			i2d_PKCS7_bio(out,p7);
+			i2d_PKCS7_bio_stream(out,p7, in, flags);
 		else
 			{
 			BIO_printf(bio_err, "Bad output format for PKCS#7 file\n");
@@ -754,6 +806,10 @@ end:
 	sk_X509_pop_free(other, X509_free);
 	if (vpm)
 		X509_VERIFY_PARAM_free(vpm);
+	if (sksigners)
+		sk_OPENSSL_STRING_free(sksigners);
+	if (skkeys)
+		sk_OPENSSL_STRING_free(skkeys);
 	X509_STORE_free(store);
 	X509_free(cert);
 	X509_free(recip);

apps/speed.c

@@ -108,53 +108,8 @@
 #include <signal.h>
 #endif
 
-#if defined(__FreeBSD__) || defined(__NetBSD__) || defined(__OpenBSD__) || defined(OPENSSL_SYS_MACOSX)
-# define USE_TOD
-#elif !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_VXWORKS) && (!defined(OPENSSL_SYS_VMS) || defined(__DECC))
-# define TIMES
-#endif
-#if !defined(_UNICOS) && !defined(__OpenBSD__) && !defined(sgi) && !defined(__FreeBSD__) && !(defined(__bsdi) || defined(__bsdi__)) && !defined(_AIX) && !defined(OPENSSL_SYS_MPE) && !defined(__NetBSD__) && !defined(OPENSSL_SYS_VXWORKS) /* FIXME */
-# define TIMEB
-#endif
-
-#if defined(OPENSSL_SYS_NETWARE)
-#undef TIMES
-#undef TIMEB
-#include <time.h>
-#endif
-
-#ifndef _IRIX
-# include <time.h>
-#endif
-#ifdef TIMES
-# include <sys/types.h>
-# include <sys/times.h>
-#endif
-#ifdef USE_TOD
-# include <sys/time.h>
-# include <sys/resource.h>
-#endif
-
-/* Depending on the VMS version, the tms structure is perhaps defined.
-   The __TMS macro will show if it was.  If it wasn't defined, we should
-   undefine TIMES, since that tells the rest of the program how things
-   should be handled.				-- Richard Levitte */
-#if defined(OPENSSL_SYS_VMS_DECC) && !defined(__TMS)
-#undef TIMES
-#endif
-
-#ifdef TIMEB
-#include <sys/timeb.h>
-#endif
-
-#if !defined(TIMES) && !defined(TIMEB) && !defined(USE_TOD) && !defined(OPENSSL_SYS_VXWORKS) && !defined(OPENSSL_SYS_NETWARE)
-#error "It seems neither struct tms nor struct timeb is supported in this platform!"
-#endif
-
-#if defined(sun) || defined(__ultrix)
-#define _POSIX_SOURCE
-#include <limits.h>
-#include <sys/param.h>
+#ifdef _WIN32
+#include <windows.h>
 #endif
 
 #include <openssl/bn.h>
@@ -189,6 +144,9 @@
 #ifndef OPENSSL_NO_RIPEMD
 #include <openssl/ripemd.h>
 #endif
+#ifndef OPENSSL_NO_WHIRLPOOL
+#include <openssl/whrlpool.h>
+#endif
 #ifndef OPENSSL_NO_RC4
 #include <openssl/rc4.h>
 #endif
@@ -226,43 +184,18 @@
 #include <openssl/ecdh.h>
 #endif
 
-/*
- * The following "HZ" timing stuff should be sync'd up with the code in
- * crypto/tmdiff.[ch]. That appears to try to do the same job, though I think
- * this code is more up to date than libcrypto's so there may be features to
- * migrate over first. This is used in two places further down AFAICS. 
- * The point is that nothing in openssl actually *uses* that tmdiff stuff, so
- * either speed.c should be using it or it should go because it's obviously not
- * useful enough. Anyone want to do a janitorial job on this?
- */
-
-/* The following if from times(3) man page.  It may need to be changed */
-#ifndef HZ
-# if defined(_SC_CLK_TCK) \
-     && (!defined(OPENSSL_SYS_VMS) || __CTRL_VER >= 70000000)
-#  define HZ sysconf(_SC_CLK_TCK)
-# else
-#  ifndef CLK_TCK
-#   ifndef _BSD_CLK_TCK_ /* FreeBSD hack */
-#    define HZ	100.0
-#   else /* _BSD_CLK_TCK_ */
-#    define HZ ((double)_BSD_CLK_TCK_)
-#   endif
-#  else /* CLK_TCK */
-#   define HZ ((double)CLK_TCK)
-#  endif
-# endif
-#endif
-
-#if !defined(OPENSSL_SYS_VMS) && !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MACINTOSH_CLASSIC) && !defined(OPENSSL_SYS_OS2) && !defined(OPENSSL_SYS_NETWARE)
-# define HAVE_FORK 1
+#if defined(OPENSSL_SYS_VMS) || defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MACINTOSH_CLASSIC) || defined(OPENSSL_SYS_OS2) || defined(OPENSSL_SYS_NETWARE)
+# define NO_FORK 1
+#elif HAVE_FORK
+# undef NO_FORK
+#else
+# define NO_FORK 1
 #endif
 
 #undef BUFSIZE
 #define BUFSIZE	((long)1024*8+1)
 int run=0;
 
-static char ftime_used = 0, times_used = 0, gettimeofday_used = 0, getrusage_used = 0;
 static int mr=0;
 static int usertime=1;
 
@@ -271,11 +204,11 @@ static void print_message(const char *s,long num,int length);
 static void pkey_print_message(const char *str, const char *str2,
 	long num, int bits, int sec);
 static void print_result(int alg,int run_no,int count,double time_used);
-#ifdef HAVE_FORK
+#ifndef NO_FORK
 static int do_multi(int multi);
 #endif
 
-#define ALGOR_NUM	28
+#define ALGOR_NUM	29
 #define SIZE_NUM	5
 #define RSA_NUM		4
 #define DSA_NUM		3
@@ -289,7 +222,7 @@ static const char *names[ALGOR_NUM]={
   "rc2 cbc","rc5-32/12 cbc","blowfish cbc","cast cbc",
   "aes-128 cbc","aes-192 cbc","aes-256 cbc",
   "camellia-128 cbc","camellia-192 cbc","camellia-256 cbc",
-  "evp","sha256","sha512",
+  "evp","sha256","sha512","whirlpool",
   "aes-128 ige","aes-192 ige","aes-256 ige"};
 static double results[ALGOR_NUM][SIZE_NUM];
 static int lengths[SIZE_NUM]={16,64,256,1024,8*1024};
@@ -328,141 +261,46 @@ static SIGRETTYPE sig_done(int sig)
 #define START	0
 #define STOP	1
 
-#if defined(OPENSSL_SYS_NETWARE)
+#if defined(_WIN32)
+
+#define SIGALRM
+static unsigned int lapse,schlock;
+static void alarm(unsigned int secs) { lapse = secs*1000; }
+
+static DWORD WINAPI sleepy(VOID *arg)
+	{
+	schlock = 1;
+	Sleep(lapse);
+	run = 0;
+	return 0;
+	}
 
-   /* for NetWare the best we can do is use clock() which returns the
-    * time, in hundredths of a second, since the NLM began executing
-   */
 static double Time_F(int s)
 	{
-	double ret;
-
-   static clock_t tstart,tend;
-
-   if (s == START)
-   {
-      tstart=clock();
-      return(0);
-   }
-   else
-   {
-      tend=clock();
-      ret=(double)((double)(tend)-(double)(tstart));
-      return((ret < 0.001)?0.001:ret);
-   }
-   }
+	if (s == START)
+		{
+		HANDLE	thr;
+		schlock = 0;
+		thr = CreateThread(NULL,4096,sleepy,NULL,0,NULL);
+		if (thr==NULL)
+			{
+			DWORD ret=GetLastError();
+			BIO_printf(bio_err,"unable to CreateThread (%d)",ret);
+			ExitProcess(ret);
+			}
+		CloseHandle(thr);		/* detach the thread	*/
+		while (!schlock) Sleep(0);	/* scheduler spinlock	*/
+		}
 
+	return app_tminterval(s,usertime);
+	}
 #else
 
 static double Time_F(int s)
 	{
-	double ret;
-
-#ifdef USE_TOD
-	if(usertime)
-		{
-		static struct rusage tstart,tend;
-
-		getrusage_used = 1;
-		if (s == START)
-			{
-			getrusage(RUSAGE_SELF,&tstart);
-			return(0);
-			}
-		else
-			{
-			long i;
-
-			getrusage(RUSAGE_SELF,&tend);
-			i=(long)tend.ru_utime.tv_usec-(long)tstart.ru_utime.tv_usec;
-			ret=((double)(tend.ru_utime.tv_sec-tstart.ru_utime.tv_sec))
-			  +((double)i)/1000000.0;
-			return((ret < 0.001)?0.001:ret);
-			}
-		}
-	else
-		{
-		static struct timeval tstart,tend;
-		long i;
-
-		gettimeofday_used = 1;
-		if (s == START)
-			{
-			gettimeofday(&tstart,NULL);
-			return(0);
-			}
-		else
-			{
-			gettimeofday(&tend,NULL);
-			i=(long)tend.tv_usec-(long)tstart.tv_usec;
-			ret=((double)(tend.tv_sec-tstart.tv_sec))+((double)i)/1000000.0;
-			return((ret < 0.001)?0.001:ret);
-			}
-		}
-#else  /* ndef USE_TOD */
-		
-# ifdef TIMES
-	if (usertime)
-		{
-		static struct tms tstart,tend;
-
-		times_used = 1;
-		if (s == START)
-			{
-			times(&tstart);
-			return(0);
-			}
-		else
-			{
-			times(&tend);
-			ret = HZ;
-			ret=(double)(tend.tms_utime-tstart.tms_utime) / ret;
-			return((ret < 1e-3)?1e-3:ret);
-			}
-		}
-# endif /* times() */
-# if defined(TIMES) && defined(TIMEB)
-	else
-# endif
-# ifdef OPENSSL_SYS_VXWORKS
-                {
-		static unsigned long tick_start, tick_end;
-
-		if( s == START )
-			{
-			tick_start = tickGet();
-			return 0;
-			}
-		else
-			{
-			tick_end = tickGet();
-			ret = (double)(tick_end - tick_start) / (double)sysClkRateGet();
-			return((ret < 0.001)?0.001:ret);
-			}
-                }
-# elif defined(TIMEB)
-		{
-		static struct timeb tstart,tend;
-		long i;
-
-		ftime_used = 1;
-		if (s == START)
-			{
-			ftime(&tstart);
-			return(0);
-			}
-		else
-			{
-			ftime(&tend);
-			i=(long)tend.millitm-(long)tstart.millitm;
-			ret=((double)(tend.time-tstart.time))+((double)i)/1000.0;
-			return((ret < 0.001)?0.001:ret);
-			}
-		}
-# endif
-#endif
+	return app_tminterval(s,usertime);
 	}
-#endif /* if defined(OPENSSL_SYS_NETWARE) */
+#endif
 
 
 #ifndef OPENSSL_NO_ECDH
@@ -522,6 +360,9 @@ int MAIN(int argc, char **argv)
 	unsigned char sha512[SHA512_DIGEST_LENGTH];
 #endif
 #endif
+#ifndef OPENSSL_NO_WHIRLPOOL
+	unsigned char whirlpool[WHIRLPOOL_DIGEST_LENGTH];
+#endif
 #ifndef OPENSSL_NO_RIPEMD
 	unsigned char rmd160[RIPEMD160_DIGEST_LENGTH];
 #endif
@@ -577,7 +418,7 @@ int MAIN(int argc, char **argv)
 #define MAX_BLOCK_SIZE 64
 #endif
 	unsigned char DES_iv[8];
-	unsigned char iv[MAX_BLOCK_SIZE/8];
+	unsigned char iv[2*MAX_BLOCK_SIZE/8];
 #ifndef OPENSSL_NO_DES
 	DES_cblock *buf_as_des_cblock = NULL;
 	static DES_cblock key ={0x12,0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0};
@@ -618,9 +459,10 @@ int MAIN(int argc, char **argv)
 #define D_EVP		22
 #define D_SHA256	23	
 #define D_SHA512	24
-#define D_IGE_128_AES   25
-#define D_IGE_192_AES   26
-#define D_IGE_256_AES   27
+#define D_WHIRLPOOL	25
+#define D_IGE_128_AES   26
+#define D_IGE_192_AES   27
+#define D_IGE_256_AES   28
 	double d=0.0;
 	long c[ALGOR_NUM][SIZE_NUM];
 #define	R_DSA_512	0
@@ -749,7 +591,7 @@ int MAIN(int argc, char **argv)
 	const EVP_CIPHER *evp_cipher=NULL;
 	const EVP_MD *evp_md=NULL;
 	int decrypt=0;
-#ifdef HAVE_FORK
+#ifndef NO_FORK
 	int multi=0;
 #endif
 
@@ -877,7 +719,7 @@ int MAIN(int argc, char **argv)
 			j--;
 			}
 #endif
-#ifdef HAVE_FORK
+#ifndef NO_FORK
 		else if	((argc > 0) && (strcmp(*argv,"-multi") == 0))
 			{
 			argc--;
@@ -940,6 +782,10 @@ int MAIN(int argc, char **argv)
 		else
 #endif
 #endif
+#ifndef OPENSSL_NO_WHIRLPOOL
+			if (strcmp(*argv,"whirlpool") == 0) doit[D_WHIRLPOOL]=1;
+		else
+#endif
 #ifndef OPENSSL_NO_RIPEMD
 			if (strcmp(*argv,"ripemd") == 0) doit[D_RMD160]=1;
 		else
@@ -1151,12 +997,16 @@ int MAIN(int argc, char **argv)
 #ifndef OPENSSL_NO_SHA512
 			BIO_printf(bio_err,"sha512   ");
 #endif
+#ifndef OPENSSL_NO_WHIRLPOOL
+			BIO_printf(bio_err,"whirlpool");
+#endif
 #ifndef OPENSSL_NO_RIPEMD160
 			BIO_printf(bio_err,"rmd160");
 #endif
 #if !defined(OPENSSL_NO_MD2) || !defined(OPENSSL_NO_MDC2) || \
     !defined(OPENSSL_NO_MD4) || !defined(OPENSSL_NO_MD5) || \
-    !defined(OPENSSL_NO_SHA1) || !defined(OPENSSL_NO_RIPEMD160)
+    !defined(OPENSSL_NO_SHA1) || !defined(OPENSSL_NO_RIPEMD160) || \
+    !defined(OPENSSL_NO_WHIRLPOOL)
 			BIO_printf(bio_err,"\n");
 #endif
 
@@ -1257,7 +1107,7 @@ int MAIN(int argc, char **argv)
 			BIO_printf(bio_err,"-evp e          use EVP e.\n");
 			BIO_printf(bio_err,"-decrypt        time decryption instead of encryption (only EVP).\n");
 			BIO_printf(bio_err,"-mr             produce machine readable output.\n");
-#ifdef HAVE_FORK
+#ifndef NO_FORK
 			BIO_printf(bio_err,"-multi n        run n benchmarks in parallel.\n");
 #endif
 			goto end;
@@ -1267,7 +1117,7 @@ int MAIN(int argc, char **argv)
 		j++;
 		}
 
-#ifdef HAVE_FORK
+#ifndef NO_FORK
 	if(multi && do_multi(multi))
 		goto show_res;
 #endif
@@ -1283,17 +1133,20 @@ int MAIN(int argc, char **argv)
 			rsa_doit[i]=1;
 		for (i=0; i<DSA_NUM; i++)
 			dsa_doit[i]=1;
+#ifndef OPENSSL_NO_ECDSA
+		for (i=0; i<EC_NUM; i++)
+			ecdsa_doit[i]=1;
+#endif
+#ifndef OPENSSL_NO_ECDH
+		for (i=0; i<EC_NUM; i++)
+			ecdh_doit[i]=1;
+#endif
 		}
 	for (i=0; i<ALGOR_NUM; i++)
 		if (doit[i]) pr_header++;
 
 	if (usertime == 0 && !mr)
 		BIO_printf(bio_err,"You have chosen to measure elapsed time instead of user CPU time.\n");
-	if (usertime <= 0 && !mr)
-		{
-		BIO_printf(bio_err,"To get the most accurate results, try to run this\n");
-		BIO_printf(bio_err,"program when this computer is idle.\n");
-		}
 
 #ifndef OPENSSL_NO_RSA
 	for (i=0; i<RSA_NUM; i++)
@@ -1403,6 +1256,7 @@ int MAIN(int argc, char **argv)
 	c[D_CBC_256_CML][0]=count;
 	c[D_SHA256][0]=count;
 	c[D_SHA512][0]=count;
+	c[D_WHIRLPOOL][0]=count;
 	c[D_IGE_128_AES][0]=count;
 	c[D_IGE_192_AES][0]=count;
 	c[D_IGE_256_AES][0]=count;
@@ -1418,6 +1272,7 @@ int MAIN(int argc, char **argv)
 		c[D_RMD160][i]=c[D_RMD160][0]*4*lengths[0]/lengths[i];
 		c[D_SHA256][i]=c[D_SHA256][0]*4*lengths[0]/lengths[i];
 		c[D_SHA512][i]=c[D_SHA512][0]*4*lengths[0]/lengths[i];
+		c[D_WHIRLPOOL][i]=c[D_WHIRLPOOL][0]*4*lengths[0]/lengths[i];
 		}
 	for (i=1; i<SIZE_NUM; i++)
 		{
@@ -1601,7 +1456,9 @@ int MAIN(int argc, char **argv)
 #else
 #define COND(c)	(run)
 #define COUNT(d) (count)
+#ifndef _WIN32
 	signal(SIGALRM,sig_done);
+#endif
 #endif /* SIGALRM */
 
 #ifndef OPENSSL_NO_MD2
@@ -1731,8 +1588,23 @@ int MAIN(int argc, char **argv)
 			}
 		}
 #endif
-
 #endif
+
+#ifndef OPENSSL_NO_WHIRLPOOL
+	if (doit[D_WHIRLPOOL])
+		{
+		for (j=0; j<SIZE_NUM; j++)
+			{
+			print_message(names[D_WHIRLPOOL],c[D_WHIRLPOOL][j],lengths[j]);
+			Time_F(START);
+			for (count=0,run=1; COND(c[D_WHIRLPOOL][j]); count++)
+				WHIRLPOOL(buf,lengths[j],whirlpool);
+			d=Time_F(STOP);
+			print_result(D_WHIRLPOOL,j,count,d);
+			}
+		}
+#endif
+
 #ifndef OPENSSL_NO_RIPEMD
 	if (doit[D_RMD160])
 		{
@@ -1878,6 +1750,8 @@ int MAIN(int argc, char **argv)
 			print_result(D_IGE_256_AES,j,count,d);
 			}
 		}
+
+
 #endif
 #ifndef OPENSSL_NO_CAMELLIA
 	if (doit[D_CBC_128_CML])
@@ -2132,7 +2006,7 @@ int MAIN(int argc, char **argv)
 				{
 				ret=RSA_verify(NID_md5_sha1, buf,36, buf2,
 					rsa_num, rsa_key[j]);
-				if (ret == 0)
+				if (ret <= 0)
 					{
 					BIO_printf(bio_err,
 						"RSA verify failure\n");
@@ -2462,7 +2336,7 @@ int MAIN(int argc, char **argv)
 		}
 	if (rnd_fake) RAND_cleanup();
 #endif
-#ifdef HAVE_FORK
+#ifndef NO_FORK
 show_res:
 #endif
 	if(!mr)
@@ -2490,35 +2364,6 @@ show_res:
 		printf("%s ",BF_options());
 #endif
 		fprintf(stdout,"\n%s\n",SSLeay_version(SSLEAY_CFLAGS));
-		printf("available timing options: ");
-#ifdef TIMES
-		printf("TIMES ");
-#endif
-#ifdef TIMEB
-		printf("TIMEB ");
-#endif
-#ifdef USE_TOD
-		printf("USE_TOD ");
-#endif
-#ifdef HZ
-#define as_string(s) (#s)
-		{
-		double dbl = HZ;
-		printf("HZ=%g", dbl);
-		}
-# ifdef _SC_CLK_TCK
-		printf(" [sysconf value]");
-# endif
-#endif
-		printf("\n");
-		printf("timing function used: %s%s%s%s%s%s%s\n",
-		       (ftime_used ? "ftime" : ""),
-		       (ftime_used + times_used > 1 ? "," : ""),
-		       (times_used ? "times" : ""),
-		       (ftime_used + times_used + gettimeofday_used > 1 ? "," : ""),
-		       (gettimeofday_used ? "gettimeofday" : ""),
-		       (ftime_used + times_used + gettimeofday_used + getrusage_used > 1 ? "," : ""),
-		       (getrusage_used ? "getrusage" : ""));
 		}
 
 	if (pr_header)
@@ -2717,7 +2562,7 @@ static void print_result(int alg,int run_no,int count,double time_used)
 	results[alg][run_no]=((double)count)/time_used*lengths[run_no];
 	}
 
-#ifdef HAVE_FORK
+#ifndef NO_FORK
 static char *sstrsep(char **string, const char *delim)
     {
     char isdelim[256];
@@ -2760,6 +2605,8 @@ static int do_multi(int multi)
 	for(n=0 ; n < multi ; ++n)
 		{
 		pipe(fd);
+		fflush(stdout);
+		fflush(stderr);
 		if(fork())
 			{
 			close(fd[1]);
@@ -2773,6 +2620,7 @@ static int do_multi(int multi)
 			close(fd[1]);
 			mr=1;
 			usertime=0;
+			free(fds);
 			return 0;
 			}
 		printf("Forked child %d\n",n);
@@ -2921,7 +2769,10 @@ static int do_multi(int multi)
 			else
 				fprintf(stderr,"Unknown type '%s' from child %d\n",buf,n);
 			}
+
+		fclose(f);
 		}
+	free(fds);
 	return 1;
 	}
 #endif

apps/spkac.c

@@ -1,6 +1,6 @@
 /* apps/spkac.c */
 
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
+/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
  * project 1999. Based on an original idea by Massimiliano Pala
  * (madwolf@openca.org).
  */
@@ -285,7 +285,7 @@ bad:
 	pkey = NETSCAPE_SPKI_get_pubkey(spki);
 	if(verify) {
 		i = NETSCAPE_SPKI_verify(spki, pkey);
-		if(i) BIO_printf(bio_err, "Signature OK\n");
+		if (i > 0) BIO_printf(bio_err, "Signature OK\n");
 		else {
 			BIO_printf(bio_err, "Signature Failure\n");
 			ERR_print_errors(bio_err);

apps/tsget

@@ -0,0 +1,196 @@
+#!/usr/bin/perl -w
+# Written by Zoltan Glozik <zglozik@stones.com>.
+# Copyright (c) 2002 The OpenTSA Project.  All rights reserved.
+$::version = '$Id: tsget,v 1.1.2.2 2009/09/07 17:57:02 steve Exp $';
+
+use strict;
+use IO::Handle;
+use Getopt::Std;
+use File::Basename;
+use WWW::Curl::Easy;
+
+use vars qw(%options);
+
+# Callback for reading the body.
+sub read_body {
+    my ($maxlength, $state) = @_;
+    my $return_data = "";
+    my $data_len = length ${$state->{data}};
+    if ($state->{bytes} < $data_len) {
+	$data_len = $data_len - $state->{bytes};
+	$data_len = $maxlength if $data_len > $maxlength;
+	$return_data = substr ${$state->{data}}, $state->{bytes}, $data_len;
+	$state->{bytes} += $data_len;
+    }
+    return $return_data;
+}
+
+# Callback for writing the body into a variable.
+sub write_body {
+    my ($data, $pointer) = @_;
+    ${$pointer} .= $data;
+    return length($data);
+}
+
+# Initialise a new Curl object.
+sub create_curl {
+    my $url = shift;
+
+    # Create Curl object.
+    my $curl = WWW::Curl::Easy::new();
+
+    # Error-handling related options.
+    $curl->setopt(CURLOPT_VERBOSE, 1) if $options{d};
+    $curl->setopt(CURLOPT_FAILONERROR, 1);
+    $curl->setopt(CURLOPT_USERAGENT, "OpenTSA tsget.pl/" . (split / /, $::version)[2]);
+
+    # Options for POST method.
+    $curl->setopt(CURLOPT_UPLOAD, 1);
+    $curl->setopt(CURLOPT_CUSTOMREQUEST, "POST");
+    $curl->setopt(CURLOPT_HTTPHEADER,
+		["Content-Type: application/timestamp-query",
+		"Accept: application/timestamp-reply,application/timestamp-response"]);
+    $curl->setopt(CURLOPT_READFUNCTION, \&read_body);
+    $curl->setopt(CURLOPT_HEADERFUNCTION, sub { return length($_[0]); });
+
+    # Options for getting the result.
+    $curl->setopt(CURLOPT_WRITEFUNCTION, \&write_body);
+
+    # SSL related options.
+    $curl->setopt(CURLOPT_SSLKEYTYPE, "PEM");
+    $curl->setopt(CURLOPT_SSL_VERIFYPEER, 1);	# Verify server's certificate.
+    $curl->setopt(CURLOPT_SSL_VERIFYHOST, 2);	# Check server's CN.
+    $curl->setopt(CURLOPT_SSLKEY, $options{k}) if defined($options{k});
+    $curl->setopt(CURLOPT_SSLKEYPASSWD, $options{p}) if defined($options{p});
+    $curl->setopt(CURLOPT_SSLCERT, $options{c}) if defined($options{c});
+    $curl->setopt(CURLOPT_CAINFO, $options{C}) if defined($options{C});
+    $curl->setopt(CURLOPT_CAPATH, $options{P}) if defined($options{P});
+    $curl->setopt(CURLOPT_RANDOM_FILE, $options{r}) if defined($options{r});
+    $curl->setopt(CURLOPT_EGDSOCKET, $options{g}) if defined($options{g});
+
+    # Setting destination.
+    $curl->setopt(CURLOPT_URL, $url);
+
+    return $curl;
+}
+
+# Send a request and returns the body back.
+sub get_timestamp {
+    my $curl = shift;
+    my $body = shift;
+    my $ts_body;
+    local $::error_buf;
+
+    # Error-handling related options.
+    $curl->setopt(CURLOPT_ERRORBUFFER, "::error_buf");
+
+    # Options for POST method.
+    $curl->setopt(CURLOPT_INFILE, {data => $body, bytes => 0});
+    $curl->setopt(CURLOPT_INFILESIZE, length(${$body}));
+
+    # Options for getting the result.
+    $curl->setopt(CURLOPT_FILE, \$ts_body);
+
+    # Send the request...
+    my $error_code = $curl->perform();
+    my $error_string;
+    if ($error_code != 0) {
+        my $http_code = $curl->getinfo(CURLINFO_HTTP_CODE);
+	$error_string = "could not get timestamp";
+	$error_string .= ", http code: $http_code" unless $http_code == 0;
+	$error_string .= ", curl code: $error_code";
+	$error_string .= " ($::error_buf)" if defined($::error_buf);
+    } else {
+        my $ct = $curl->getinfo(CURLINFO_CONTENT_TYPE);
+	if (lc($ct) ne "application/timestamp-reply"
+	    && lc($ct) ne "application/timestamp-response") {
+	    $error_string = "unexpected content type returned: $ct";
+        }
+    }
+    return ($ts_body, $error_string);
+
+}
+
+# Print usage information and exists.
+sub usage {
+
+    print STDERR "usage: $0 -h <server_url> [-e <extension>] [-o <output>] ";
+    print STDERR "[-v] [-d] [-k <private_key.pem>] [-p <key_password>] ";
+    print STDERR "[-c <client_cert.pem>] [-C <CA_certs.pem>] [-P <CA_path>] ";
+    print STDERR "[-r <file:file...>] [-g <EGD_socket>] [<request>]...\n";
+    exit 1;
+}
+
+# ----------------------------------------------------------------------
+#   Main program
+# ----------------------------------------------------------------------
+
+# Getting command-line options (default comes from TSGET environment variable).
+my $getopt_arg =  "h:e:o:vdk:p:c:C:P:r:g:";
+if (exists $ENV{TSGET}) {
+    my @old_argv = @ARGV;
+    @ARGV = split /\s+/, $ENV{TSGET};
+    getopts($getopt_arg, \%options) or usage;
+    @ARGV = @old_argv;
+}
+getopts($getopt_arg, \%options) or usage;
+
+# Checking argument consistency.
+if (!exists($options{h}) || (@ARGV == 0 && !exists($options{o}))
+    || (@ARGV > 1 && exists($options{o}))) {
+    print STDERR "Inconsistent command line options.\n";
+    usage;
+}
+# Setting defaults.
+@ARGV = ("-") unless @ARGV != 0;
+$options{e} = ".tsr" unless defined($options{e});
+
+# Processing requests.
+my $curl = create_curl $options{h};
+undef $/;   # For reading whole files.
+REQUEST: foreach (@ARGV) {
+    my $input = $_;
+    my ($base, $path) = fileparse($input, '\.[^.]*');
+    my $output_base = $base . $options{e};
+    my $output = defined($options{o}) ? $options{o} : $path . $output_base;
+
+    STDERR->printflush("$input: ") if $options{v};
+    # Read request.
+    my $body;
+    if ($input eq "-") {
+	# Read the request from STDIN;
+	$body = <STDIN>;
+    } else {
+	# Read the request from file.
+        open INPUT, "<" . $input
+	    or warn("$input: could not open input file: $!\n"), next REQUEST;
+        $body = <INPUT>;
+        close INPUT
+	    or warn("$input: could not close input file: $!\n"), next REQUEST;
+    }
+
+    # Send request.
+    STDERR->printflush("sending request") if $options{v};
+
+    my ($ts_body, $error) = get_timestamp $curl, \$body;
+    if (defined($error)) {
+	die "$input: fatal error: $error\n";
+    }
+    STDERR->printflush(", reply received") if $options{v};
+
+    # Write response.
+    if ($output eq "-") {
+	# Write to STDOUT.
+        print $ts_body;
+    } else {
+	# Write to file.
+        open OUTPUT, ">", $output
+	    or warn("$output: could not open output file: $!\n"), next REQUEST;
+        print OUTPUT $ts_body;
+        close OUTPUT
+	    or warn("$output: could not close output file: $!\n"), next REQUEST;
+    }
+    STDERR->printflush(", $output written.\n") if $options{v};
+}
+$curl->cleanup();
+WWW::Curl::Easy::global_cleanup();

apps/verify.c

@@ -70,8 +70,9 @@
 #define PROG	verify_main
 
 static int MS_CALLBACK cb(int ok, X509_STORE_CTX *ctx);
-static int check(X509_STORE *ctx, char *file, STACK_OF(X509) *uchain, STACK_OF(X509) *tchain, int purpose, ENGINE *e);
-static STACK_OF(X509) *load_untrusted(char *file);
+static int check(X509_STORE *ctx, char *file,
+		STACK_OF(X509) *uchain, STACK_OF(X509) *tchain,
+		STACK_OF(X509_CRL) *crls, ENGINE *e);
 static int v_verbose=0, vflags = 0;
 
 int MAIN(int, char **);
@@ -80,10 +81,10 @@ int MAIN(int argc, char **argv)
 	{
 	ENGINE *e = NULL;
 	int i,ret=1, badarg = 0;
-	int purpose = -1;
 	char *CApath=NULL,*CAfile=NULL;
-	char *untfile = NULL, *trustfile = NULL;
+	char *untfile = NULL, *trustfile = NULL, *crlfile = NULL;
 	STACK_OF(X509) *untrusted = NULL, *trusted = NULL;
+	STACK_OF(X509_CRL) *crls = NULL;
 	X509_STORE *cert_ctx=NULL;
 	X509_LOOKUP *lookup=NULL;
 	X509_VERIFY_PARAM *vpm = NULL;
@@ -93,7 +94,7 @@ int MAIN(int argc, char **argv)
 
 	cert_ctx=X509_STORE_new();
 	if (cert_ctx == NULL) goto end;
-	X509_STORE_set_verify_cb_func(cert_ctx,cb);
+	X509_STORE_set_verify_cb(cert_ctx,cb);
 
 	ERR_load_crypto_strings();
 
@@ -139,6 +140,11 @@ int MAIN(int argc, char **argv)
 				if (argc-- < 1) goto end;
 				trustfile= *(++argv);
 				}
+			else if (strcmp(*argv,"-CRLfile") == 0)
+				{
+				if (argc-- < 1) goto end;
+				crlfile= *(++argv);
+				}
 #ifndef OPENSSL_NO_ENGINE
 			else if (strcmp(*argv,"-engine") == 0)
 				{
@@ -192,26 +198,34 @@ int MAIN(int argc, char **argv)
 
 	ERR_clear_error();
 
-	if(untfile) {
-		if(!(untrusted = load_untrusted(untfile))) {
-			BIO_printf(bio_err, "Error loading untrusted file %s\n", untfile);
-			ERR_print_errors(bio_err);
+	if(untfile)
+		{
+		untrusted = load_certs(bio_err, untfile, FORMAT_PEM,
+					NULL, e, "untrusted certificates");
+		if(!untrusted)
 			goto end;
 		}
-	}
 
-	if(trustfile) {
-		if(!(trusted = load_untrusted(trustfile))) {
-			BIO_printf(bio_err, "Error loading untrusted file %s\n", trustfile);
-			ERR_print_errors(bio_err);
+	if(trustfile)
+		{
+		trusted = load_certs(bio_err, trustfile, FORMAT_PEM,
+					NULL, e, "trusted certificates");
+		if(!trusted)
 			goto end;
 		}
-	}
 
-	if (argc < 1) check(cert_ctx, NULL, untrusted, trusted, purpose, e);
+	if(crlfile)
+		{
+		crls = load_crls(bio_err, crlfile, FORMAT_PEM,
+					NULL, e, "other CRLs");
+		if(!crls)
+			goto end;
+		}
+
+	if (argc < 1) check(cert_ctx, NULL, untrusted, trusted, crls, e);
 	else
 		for (i=0; i<argc; i++)
-			check(cert_ctx,argv[i], untrusted, trusted, purpose, e);
+			check(cert_ctx,argv[i], untrusted, trusted, crls, e);
 	ret=0;
 end:
 	if (ret == 1) {
@@ -232,11 +246,14 @@ end:
 	if (cert_ctx != NULL) X509_STORE_free(cert_ctx);
 	sk_X509_pop_free(untrusted, X509_free);
 	sk_X509_pop_free(trusted, X509_free);
+	sk_X509_CRL_pop_free(crls, X509_CRL_free);
 	apps_shutdown();
 	OPENSSL_EXIT(ret);
 	}
 
-static int check(X509_STORE *ctx, char *file, STACK_OF(X509) *uchain, STACK_OF(X509) *tchain, int purpose, ENGINE *e)
+static int check(X509_STORE *ctx, char *file,
+		STACK_OF(X509) *uchain, STACK_OF(X509) *tchain,
+		STACK_OF(X509_CRL) *crls, ENGINE *e)
 	{
 	X509 *x=NULL;
 	int i=0,ret=0;
@@ -260,13 +277,14 @@ static int check(X509_STORE *ctx, char *file, STACK_OF(X509) *uchain, STACK_OF(X
 		goto end;
 		}
 	if(tchain) X509_STORE_CTX_trusted_stack(csc, tchain);
-	if(purpose >= 0) X509_STORE_CTX_set_purpose(csc, purpose);
+	if (crls)
+		X509_STORE_CTX_set0_crls(csc, crls);
 	i=X509_verify_cert(csc);
 	X509_STORE_CTX_free(csc);
 
 	ret=0;
 end:
-	if (i)
+	if (i > 0)
 		{
 		fprintf(stdout,"OK\n");
 		ret=1;
@@ -278,93 +296,55 @@ end:
 	return(ret);
 	}
 
-static STACK_OF(X509) *load_untrusted(char *certfile)
-{
-	STACK_OF(X509_INFO) *sk=NULL;
-	STACK_OF(X509) *stack=NULL, *ret=NULL;
-	BIO *in=NULL;
-	X509_INFO *xi;
-
-	if(!(stack = sk_X509_new_null())) {
-		BIO_printf(bio_err,"memory allocation failure\n");
-		goto end;
-	}
-
-	if(!(in=BIO_new_file(certfile, "r"))) {
-		BIO_printf(bio_err,"error opening the file, %s\n",certfile);
-		goto end;
-	}
-
-	/* This loads from a file, a stack of x509/crl/pkey sets */
-	if(!(sk=PEM_X509_INFO_read_bio(in,NULL,NULL,NULL))) {
-		BIO_printf(bio_err,"error reading the file, %s\n",certfile);
-		goto end;
-	}
-
-	/* scan over it and pull out the certs */
-	while (sk_X509_INFO_num(sk))
-		{
-		xi=sk_X509_INFO_shift(sk);
-		if (xi->x509 != NULL)
-			{
-			sk_X509_push(stack,xi->x509);
-			xi->x509=NULL;
-			}
-		X509_INFO_free(xi);
-		}
-	if(!sk_X509_num(stack)) {
-		BIO_printf(bio_err,"no certificates in file, %s\n",certfile);
-		sk_X509_free(stack);
-		goto end;
-	}
-	ret=stack;
-end:
-	BIO_free(in);
-	sk_X509_INFO_free(sk);
-	return(ret);
-	}
-
 static int MS_CALLBACK cb(int ok, X509_STORE_CTX *ctx)
 	{
-	char buf[256];
+	int cert_error = X509_STORE_CTX_get_error(ctx);
+	X509 *current_cert = X509_STORE_CTX_get_current_cert(ctx);
 
 	if (!ok)
 		{
-		if (ctx->current_cert)
+		if (current_cert)
 			{
-			X509_NAME_oneline(
-				X509_get_subject_name(ctx->current_cert),buf,
-				sizeof buf);
-			printf("%s\n",buf);
+			X509_NAME_print_ex_fp(stdout,
+				X509_get_subject_name(current_cert),
+				0, XN_FLAG_ONELINE);
+			printf("\n");
+			}
+		printf("%serror %d at %d depth lookup:%s\n",
+			X509_STORE_CTX_get0_parent_ctx(ctx) ? "[CRL path]" : "",
+			cert_error,
+			X509_STORE_CTX_get_error_depth(ctx),
+			X509_verify_cert_error_string(cert_error));
+		switch(cert_error)
+			{
+			case X509_V_ERR_NO_EXPLICIT_POLICY:
+				policies_print(NULL, ctx);
+			case X509_V_ERR_CERT_HAS_EXPIRED:
+
+			/* since we are just checking the certificates, it is
+			 * ok if they are self signed. But we should still warn
+			 * the user.
+			 */
+
+			case X509_V_ERR_DEPTH_ZERO_SELF_SIGNED_CERT:
+			/* Continue after extension errors too */
+			case X509_V_ERR_INVALID_CA:
+			case X509_V_ERR_INVALID_NON_CA:
+			case X509_V_ERR_PATH_LENGTH_EXCEEDED:
+			case X509_V_ERR_INVALID_PURPOSE:
+			case X509_V_ERR_CRL_HAS_EXPIRED:
+			case X509_V_ERR_CRL_NOT_YET_VALID:
+			case X509_V_ERR_UNHANDLED_CRITICAL_EXTENSION:
+			ok = 1;
+
 			}
-		printf("error %d at %d depth lookup:%s\n",ctx->error,
-			ctx->error_depth,
-			X509_verify_cert_error_string(ctx->error));
-		if (ctx->error == X509_V_ERR_CERT_HAS_EXPIRED) ok=1;
-		/* since we are just checking the certificates, it is
-		 * ok if they are self signed. But we should still warn
-		 * the user.
- 		 */
-		if (ctx->error == X509_V_ERR_DEPTH_ZERO_SELF_SIGNED_CERT) ok=1;
-		/* Continue after extension errors too */
-		if (ctx->error == X509_V_ERR_INVALID_CA) ok=1;
-		if (ctx->error == X509_V_ERR_INVALID_NON_CA) ok=1;
-		if (ctx->error == X509_V_ERR_PATH_LENGTH_EXCEEDED) ok=1;
-		if (ctx->error == X509_V_ERR_INVALID_PURPOSE) ok=1;
-		if (ctx->error == X509_V_ERR_DEPTH_ZERO_SELF_SIGNED_CERT) ok=1;
-		if (ctx->error == X509_V_ERR_CRL_HAS_EXPIRED) ok=1;
-		if (ctx->error == X509_V_ERR_CRL_NOT_YET_VALID) ok=1;
-		if (ctx->error == X509_V_ERR_UNHANDLED_CRITICAL_EXTENSION) ok=1;
 
-		if (ctx->error == X509_V_ERR_NO_EXPLICIT_POLICY)
-			policies_print(NULL, ctx);
 		return ok;
 
 		}
-	if ((ctx->error == X509_V_OK) && (ok == 2))
+	if (cert_error == X509_V_OK && ok == 2)
 		policies_print(NULL, ctx);
 	if (!v_verbose)
 		ERR_clear_error();
 	return(ok);
 	}
-

apps/version.c

@@ -167,7 +167,7 @@ int MAIN(int argc, char **argv)
 			date=version=cflags=options=platform=dir=1;
 		else
 			{
-			BIO_printf(bio_err,"usage:version -[avbofp]\n");
+			BIO_printf(bio_err,"usage:version -[avbofpd]\n");
 			ret=1;
 			goto end;
 			}

apps/x509.c

@@ -114,6 +114,7 @@ static const char *x509_usage[]={
 " -alias          - output certificate alias\n",
 " -noout          - no certificate output\n",
 " -ocspid         - print OCSP hash values for the subject name and public key\n",
+" -ocsp_uri       - print OCSP Responder URL(s)\n",
 " -trustout       - output a \"trusted\" certificate\n",
 " -clrtrust       - clear all trusted purposes\n",
 " -clrreject      - clear all rejected purposes\n",
@@ -179,6 +180,7 @@ int MAIN(int argc, char **argv)
 	int next_serial=0;
 	int subject_hash=0,issuer_hash=0,ocspid=0;
 	int noout=0,sign_flag=0,CA_flag=0,CA_createserial=0,email=0;
+	int ocsp_uri=0;
 	int trustout=0,clrtrust=0,clrreject=0,aliasout=0,clrext=0;
 	int C=0;
 	int x509req=0,days=DEF_DAYS,modulus=0,pubkey=0;
@@ -188,7 +190,7 @@ int MAIN(int argc, char **argv)
 	X509_REQ *rq=NULL;
 	int fingerprint=0;
 	char buf[256];
-	const EVP_MD *md_alg,*digest=EVP_sha1();
+	const EVP_MD *md_alg,*digest=NULL;
 	CONF *extconf = NULL;
 	char *extsect = NULL, *extfile = NULL, *passin = NULL, *passargin = NULL;
 	int need_rand = 0;
@@ -223,7 +225,7 @@ int MAIN(int argc, char **argv)
 
 	ctx=X509_STORE_new();
 	if (ctx == NULL) goto end;
-	X509_STORE_set_verify_cb_func(ctx,callb);
+	X509_STORE_set_verify_cb(ctx,callb);
 
 	argc--;
 	argv++;
@@ -378,6 +380,8 @@ int MAIN(int argc, char **argv)
 			C= ++num;
 		else if (strcmp(*argv,"-email") == 0)
 			email= ++num;
+		else if (strcmp(*argv,"-ocsp_uri") == 0)
+			ocsp_uri= ++num;
 		else if (strcmp(*argv,"-serial") == 0)
 			serial= ++num;
 		else if (strcmp(*argv,"-next_serial") == 0)
@@ -622,7 +626,7 @@ bad:
 		if (!X509_set_subject_name(x,req->req_info->subject)) goto end;
 
 		X509_gmtime_adj(X509_get_notBefore(x),0);
-	        X509_gmtime_adj(X509_get_notAfter(x),(long)60*60*24*days);
+	        X509_time_adj_ex(X509_get_notAfter(x),days, 0, NULL);
 
 		pkey = X509_REQ_get_pubkey(req);
 		X509_set_pubkey(x,pkey);
@@ -731,13 +735,17 @@ bad:
 				ASN1_INTEGER_free(ser);
 				BIO_puts(out, "\n");
 				}
-			else if (email == i) 
+			else if ((email == i) || (ocsp_uri == i))
 				{
 				int j;
-				STACK *emlst;
-				emlst = X509_get1_email(x);
-				for (j = 0; j < sk_num(emlst); j++)
-					BIO_printf(STDout, "%s\n", sk_value(emlst, j));
+				STACK_OF(OPENSSL_STRING) *emlst;
+				if (email == i)
+					emlst = X509_get1_email(x);
+				else
+					emlst = X509_get1_ocsp(x);
+				for (j = 0; j < sk_OPENSSL_STRING_num(emlst); j++)
+					BIO_printf(STDout, "%s\n",
+						   sk_OPENSSL_STRING_value(emlst, j));
 				X509_email_free(emlst);
 				}
 			else if (aliasout == i)
@@ -885,14 +893,18 @@ bad:
 				int j;
 				unsigned int n;
 				unsigned char md[EVP_MAX_MD_SIZE];
+				const EVP_MD *fdig = digest;
 
-				if (!X509_digest(x,digest,md,&n))
+				if (!fdig)
+					fdig = EVP_sha1();
+
+				if (!X509_digest(x,fdig,md,&n))
 					{
 					BIO_printf(bio_err,"out of memory\n");
 					goto end;
 					}
 				BIO_printf(STDout,"%s Fingerprint=",
-						OBJ_nid2sn(EVP_MD_type(digest)));
+						OBJ_nid2sn(EVP_MD_type(fdig)));
 				for (j=0; j<(int)n; j++)
 					{
 					BIO_printf(STDout,"%02X%c",md[j],
@@ -912,14 +924,6 @@ bad:
 						passin, e, "Private key");
 					if (Upkey == NULL) goto end;
 					}
-#ifndef OPENSSL_NO_DSA
-		                if (Upkey->type == EVP_PKEY_DSA)
-		                        digest=EVP_dss1();
-#endif
-#ifndef OPENSSL_NO_ECDSA
-				if (Upkey->type == EVP_PKEY_EC)
-					digest=EVP_ecdsa();
-#endif
 
 				assert(need_rand);
 				if (!sign(x,Upkey,days,clrext,digest,
@@ -936,14 +940,6 @@ bad:
 						"CA Private Key");
 					if (CApkey == NULL) goto end;
 					}
-#ifndef OPENSSL_NO_DSA
-		                if (CApkey->type == EVP_PKEY_DSA)
-		                        digest=EVP_dss1();
-#endif
-#ifndef OPENSSL_NO_ECDSA
-				if (CApkey->type == EVP_PKEY_EC)
-					digest = EVP_ecdsa();
-#endif
 				
 				assert(need_rand);
 				if (!x509_certify(ctx,CAfile,digest,x,xca,
@@ -971,15 +967,6 @@ bad:
 
 				BIO_printf(bio_err,"Generating certificate request\n");
 
-#ifndef OPENSSL_NO_DSA
-		                if (pk->type == EVP_PKEY_DSA)
-		                        digest=EVP_dss1();
-#endif
-#ifndef OPENSSL_NO_ECDSA
-				if (pk->type == EVP_PKEY_EC)
-					digest=EVP_ecdsa();
-#endif
-
 				rq=X509_to_X509_REQ(x,pk,digest);
 				EVP_PKEY_free(pk);
 				if (rq == NULL)
@@ -1033,16 +1020,15 @@ bad:
 		}
 	else if (outformat == FORMAT_NETSCAPE)
 		{
-		ASN1_HEADER ah;
-		ASN1_OCTET_STRING os;
+		NETSCAPE_X509 nx;
+		ASN1_OCTET_STRING hdr;
 
-		os.data=(unsigned char *)NETSCAPE_CERT_HDR;
-		os.length=strlen(NETSCAPE_CERT_HDR);
-		ah.header= &os;
-		ah.data=(char *)x;
-		ah.meth=X509_asn1_meth();
+		hdr.data=(unsigned char *)NETSCAPE_CERT_HDR;
+		hdr.length=strlen(NETSCAPE_CERT_HDR);
+		nx.header= &hdr;
+		nx.cert=x;
 
-		i=ASN1_i2d_bio_of(ASN1_HEADER,i2d_ASN1_HEADER,out,&ah);
+		i=ASN1_item_i2d_bio(ASN1_ITEM_rptr(NETSCAPE_X509),out,&nx);
 		}
 	else	{
 		BIO_printf(bio_err,"bad output format specified for outfile\n");
@@ -1144,7 +1130,8 @@ static int x509_certify(X509_STORE *ctx, char *CAfile, const EVP_MD *digest,
 	/* NOTE: this certificate can/should be self signed, unless it was
 	 * a certificate request in which case it is not. */
 	X509_STORE_CTX_set_cert(&xsc,x);
-	if (!reqfile && !X509_verify_cert(&xsc))
+	X509_STORE_CTX_set_flags(&xsc, X509_V_FLAG_CHECK_SS_SIGNATURE);
+	if (!reqfile && X509_verify_cert(&xsc) <= 0)
 		goto end;
 
 	if (!X509_check_private_key(xca,pkey))
@@ -1160,7 +1147,7 @@ static int x509_certify(X509_STORE *ctx, char *CAfile, const EVP_MD *digest,
 		goto end;
 
 	/* hardwired expired */
-	if (X509_gmtime_adj(X509_get_notAfter(x),(long)60*60*24*days) == NULL)
+	if (X509_time_adj_ex(X509_get_notAfter(x),days, 0, NULL) == NULL)
 		goto end;
 
 	if (clrext)

certs/README.RootCerts

@@ -0,0 +1,4 @@
+The OpenSSL project does not (any longer) include root CA certificates.
+
+Please check out the FAQ:
+  * How can I set up a bundle of commercial root CA certificates?

certs/RegTP-5R.pem

@@ -1,19 +0,0 @@
-issuer= CN=5R-CA 1:PN+0.2.262.1.10.7.20=#130131,O=Regulierungsbeh\C3\88orde f\C3\88ur Telekommunikation und Post,C=DE
-notBefore=Mar 22 08:55:51 2000 GMT
-notAfter=Mar 22 08:55:51 2005 GMT
-subject= CN=5R-CA 1:PN+0.2.262.1.10.7.20=#130131,O=Regulierungsbeh\C3\88orde f\C3\88ur Telekommunikation und Post,C=DE
------BEGIN CERTIFICATE-----
-MIICaDCCAdSgAwIBAgIDDIOqMAoGBiskAwMBAgUAMG8xCzAJBgNVBAYTAkRFMT0w
-OwYDVQQKFDRSZWd1bGllcnVuZ3NiZWjIb3JkZSBmyHVyIFRlbGVrb21tdW5pa2F0
-aW9uIHVuZCBQb3N0MSEwDAYHAoIGAQoHFBMBMTARBgNVBAMUCjVSLUNBIDE6UE4w
-IhgPMjAwMDAzMjIwODU1NTFaGA8yMDA1MDMyMjA4NTU1MVowbzELMAkGA1UEBhMC
-REUxPTA7BgNVBAoUNFJlZ3VsaWVydW5nc2JlaMhvcmRlIGbIdXIgVGVsZWtvbW11
-bmlrYXRpb24gdW5kIFBvc3QxITAMBgcCggYBCgcUEwExMBEGA1UEAxQKNVItQ0Eg
-MTpQTjCBoTANBgkqhkiG9w0BAQEFAAOBjwAwgYsCgYEAih5BUycfBpqKhU8RDsaS
-vV5AtzWeXQRColL9CH3t0DKnhjKAlJ8iccFtJNv+d3bh8bb9sh0maRSo647xP7hs
-HTjKgTE4zM5BYNfXvST79OtcMgAzrnDiGjQIIWv8xbfV1MqxxdtZJygrwzRMb9jG
-CAGoJEymoyzAMNG7tSdBWnUCBQDAAAABoxIwEDAOBgNVHQ8BAf8EBAMCAQYwCgYG
-KyQDAwECBQADgYEAOaK8ihVSBUcL2IdVBxZYYUKwMz5m7H3zqhN8W9w+iafWudH6
-b+aahkbENEwzg3C3v5g8nze7v7ssacQze657LHjP+e7ksUDIgcS4R1pU2eN16bjS
-P/qGPF3rhrIEHoK5nJULkjkZYTtNiOvmQ/+G70TXDi3Os/TwLlWRvu+7YLM=
------END CERTIFICATE-----

certs/RegTP-6R.pem

@@ -1,19 +0,0 @@
-issuer= CN=6R-Ca 1:PN+0.2.262.1.10.7.20=#130131,O=Regulierungsbeh\C3\88orde f\C3\88ur Telekommunikation und Post,C=DE
-notBefore=Feb  1 09:52:17 2001 GMT
-notAfter=Jun  1 09:52:17 2005 GMT
-subject= CN=6R-Ca 1:PN+0.2.262.1.10.7.20=#130131,O=Regulierungsbeh\C3\88orde f\C3\88ur Telekommunikation und Post,C=DE
------BEGIN CERTIFICATE-----
-MIICaDCCAdSgAwIBAgIDMtGNMAoGBiskAwMBAgUAMG8xCzAJBgNVBAYTAkRFMT0w
-OwYDVQQKFDRSZWd1bGllcnVuZ3NiZWjIb3JkZSBmyHVyIFRlbGVrb21tdW5pa2F0
-aW9uIHVuZCBQb3N0MSEwDAYHAoIGAQoHFBMBMTARBgNVBAMUCjZSLUNhIDE6UE4w
-IhgPMjAwMTAyMDEwOTUyMTdaGA8yMDA1MDYwMTA5NTIxN1owbzELMAkGA1UEBhMC
-REUxPTA7BgNVBAoUNFJlZ3VsaWVydW5nc2JlaMhvcmRlIGbIdXIgVGVsZWtvbW11
-bmlrYXRpb24gdW5kIFBvc3QxITAMBgcCggYBCgcUEwExMBEGA1UEAxQKNlItQ2Eg
-MTpQTjCBoTANBgkqhkiG9w0BAQEFAAOBjwAwgYsCgYEAg6KrFSTNXKqe+2GKGeW2
-wTmbVeflNkp5H/YxA9K1zmEn5XjKm0S0jH4Wfms6ipPlURVaFwTfnB1s++AnJAWf
-mayaE9BP/pdIY6WtZGgW6aZc32VDMCMKPWyBNyagsJVDmzlakIA5cXBVa7Xqqd3P
-ew8i2feMnQXcqHfDv02CW88CBQDAAAABoxIwEDAOBgNVHQ8BAf8EBAMCAQYwCgYG
-KyQDAwECBQADgYEAOkqkUwdaTCt8wcJLA2zLuOwL5ADHMWLhv6gr5zEF+VckA6qe
-IVLVf8e7fYlRmzQd+5OJcGglCQJLGT+ZplI3Mjnrd4plkoTNKV4iOzBcvJD7K4tn
-XPvs9wCFcC7QU7PLvc1FDsAlr7e4wyefZRDL+wbqNfI7QZTSF1ubLd9AzeQ=
------END CERTIFICATE-----

certs/aol1.pem

@@ -1,22 +0,0 @@
------BEGIN CERTIFICATE-----
-MIIDpDCCAoygAwIBAgIBATANBgkqhkiG9w0BAQUFADBjMQswCQYDVQQGEwJVUzEc
-MBoGA1UEChMTQW1lcmljYSBPbmxpbmUgSW5jLjE2MDQGA1UEAxMtQW1lcmljYSBP
-bmxpbmUgUm9vdCBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eSAxMB4XDTAyMDUyODA2
-MDAwMFoXDTM3MTExOTIwNDMwMFowYzELMAkGA1UEBhMCVVMxHDAaBgNVBAoTE0Ft
-ZXJpY2EgT25saW5lIEluYy4xNjA0BgNVBAMTLUFtZXJpY2EgT25saW5lIFJvb3Qg
-Q2VydGlmaWNhdGlvbiBBdXRob3JpdHkgMTCCASIwDQYJKoZIhvcNAQEBBQADggEP
-ADCCAQoCggEBAKgv6KRpBgNHw+kqmP8ZonCaxlCyfqXfaE0bfA+2l2h9LaaLl+lk
-hsmj76CGv2BlnEtUiMJIxUo5vxTjWVXlGbR0yLQFOVwWpeKVBeASrlmLojNoWBym
-1BW32J/X3HGrfpq/m44zDyL9Hy7nBzbvYjnF3cu6JRQj3gzGPTzOggjmZj7aUTsW
-OqMFf6Dch9Wc/HKpoH145LcxVR5lu9RhsCFg7RAycsWSJR74kEoYeEfffjA3PlAb
-2xzTa5qGUwew76wGePiEmf4hjUyAtgyC9mZweRrTT6PP8c9GsEsPPt2IYriMqQko
-O3rHl+Ee5fSfwMCuJKDIodkP1nsmgmkyPacCAwEAAaNjMGEwDwYDVR0TAQH/BAUw
-AwEB/zAdBgNVHQ4EFgQUAK3Zo/Z59m50qX8zPYEX10zPM94wHwYDVR0jBBgwFoAU
-AK3Zo/Z59m50qX8zPYEX10zPM94wDgYDVR0PAQH/BAQDAgGGMA0GCSqGSIb3DQEB
-BQUAA4IBAQB8itEfGDeC4Liwo+1WlchiYZwFos3CYiZhzRAW18y0ZTTQEYqtqKkF
-Zu90821fnZmv9ov761KyBZiibyrFVL0lvV+uyIbqRizBs73B6UlwGBaXCBOMIOAb
-LjpHyx7kADCVW/RFo8AasAFOq73AI25jP4BKxQft3OJvx8Fi8eNy1gTIdGcL+oir
-oQHIb/AUr9KZzVGTfu0uOMe9zkZQPXLjeSWdm4grECDdpbgyn43gKd8hdIaC2y+C
-MMbHNYaz+ZZfRtsMRf3zUMNvxsNIrUam4SdHCh0Om7bCd39j8uB9Gr784N/Xx6ds
-sPmuujz9dLQR6FgNgLzTqIA6me11zEZ7
------END CERTIFICATE-----

certs/aol2.pem

@@ -1,33 +0,0 @@
------BEGIN CERTIFICATE-----
-MIIFpDCCA4ygAwIBAgIBATANBgkqhkiG9w0BAQUFADBjMQswCQYDVQQGEwJVUzEc
-MBoGA1UEChMTQW1lcmljYSBPbmxpbmUgSW5jLjE2MDQGA1UEAxMtQW1lcmljYSBP
-bmxpbmUgUm9vdCBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eSAyMB4XDTAyMDUyODA2
-MDAwMFoXDTM3MDkyOTE0MDgwMFowYzELMAkGA1UEBhMCVVMxHDAaBgNVBAoTE0Ft
-ZXJpY2EgT25saW5lIEluYy4xNjA0BgNVBAMTLUFtZXJpY2EgT25saW5lIFJvb3Qg
-Q2VydGlmaWNhdGlvbiBBdXRob3JpdHkgMjCCAiIwDQYJKoZIhvcNAQEBBQADggIP
-ADCCAgoCggIBAMxBRR3pPU0Q9oyxQcngXssNt79Hc9PwVU3dxgz6sWYFas14tNwC
-206B89enfHG8dWOgXeMHDEjsJcQDIPT/DjsS/5uN4cbVG7RtIuOx238hZK+GvFci
-KtZHgVdEglZTvYYUAQv8f3SkWq7xuhG1m1hagLQ3eAkzfDJHA1zEpYNI9FdWboE2
-JxhP7JsowtS013wMPgwr38oE18aO6lhOqKSlGBxsRZijQdEt0sdtjRnxrXm3gT+9
-BoInLRBYBbV4Bbkv2wxrkJB+FFk4u5QkE+XRnRTf04JNRvCAOVIyD+OEsnpD8l7e
-Xz8d3eOyG6ChKiMDbi4BFYdcpnV1x5dhvt6G3NRI270qv0pV2uh9UPu0gBe4lL8B
-PeraunzgWGcXuVjgiIZGZ2ydEEdYMtA1fHkqkKJaEBEjNa0vzORKW6fIJ/KD3l67
-Xnfn6KVuY8INXWHQjNJsWiEOyiijzirplcdIz5ZvHZIlyMbGwcEMBawmxNJ10uEq
-Z8A9W6Wa6897GqidFEXlD6CaZd4vKL3Ob5Rmg0gp2OpljK+T2WSfVVcmv2/LNzGZ
-o2C7HK2JNDJiuEMhBnIMoVxtRsX6Kc8w3onccVvdtjc+31D1uAclJuW8tf48ArO3
-+L5DwYcRlJ4jbBeKuIonDFRH8KmzwICMoCfrHRnjB453cMor9H124HhnAgMBAAGj
-YzBhMA8GA1UdEwEB/wQFMAMBAf8wHQYDVR0OBBYEFE1FwWg4u3OpaaEg5+31IqEj
-FNeeMB8GA1UdIwQYMBaAFE1FwWg4u3OpaaEg5+31IqEjFNeeMA4GA1UdDwEB/wQE
-AwIBhjANBgkqhkiG9w0BAQUFAAOCAgEAZ2sGuV9FOypLM7PmG2tZTiLMubekJcmn
-xPBUlgtk87FYT15R/LKXeydlwuXK5w0MJXti4/qftIe3RUavg6WXSIylvfEWK5t2
-LHo1YGwRgJfMqZJS5ivmae2p+DYtLHe/YUjRYwu5W1LtGLBDQiKmsXeu3mnFzccc
-obGlHBD7GL4acN3Bkku+KVqdPzW+5X1R+FXgJXUjhx5c3LqdsKyzadsXg8n33gy8
-CNyRnqjQ1xU3c6U1uPx+xURABsPr+CKAXEfOAuMRn0T//ZoyzH1kUQ7rVyZ2OuMe
-IjzCpjbdGe+n/BLzJsBZMYVMnNjP36TMzCmT/5RtdlwTCJfy7aULTd3oyWgOZtMA
-DjMSW7yV5TKQqLPGbIOtd+6Lfn6xqavT4fG2wLHqiMDn05DpKJKUe2h7lyoKZy2F
-AjgQ5ANh1NolNscIWC2hp1GvMApJ9aZphwctREZ2jirlmjvXGKL8nDgQzMY70rUX
-Om/9riW99XJZZLF0KjhfGEzfz3EEWjbUvy+ZnOjZurGV5gJLIaFb1cFPj65pbVPb
-AZO1XB4Y3WRayhgoPmMEEf0cjQAPuDffZ4qdZqkCapH/E8ovXYO8h5Ns3CRRFgQl
-Zvqz2cK6Kb6aSDiCmfS/O0oxGfm/jiEzFMpPVF/7zvuPcX/9XhmgD0uRuMRUvAaw
-RY8mkaKO/qk=
------END CERTIFICATE-----

certs/aoltw1.pem

@@ -1,23 +0,0 @@
------BEGIN CERTIFICATE-----
-MIID5jCCAs6gAwIBAgIBATANBgkqhkiG9w0BAQUFADCBgzELMAkGA1UEBhMCVVMx
-HTAbBgNVBAoTFEFPTCBUaW1lIFdhcm5lciBJbmMuMRwwGgYDVQQLExNBbWVyaWNh
-IE9ubGluZSBJbmMuMTcwNQYDVQQDEy5BT0wgVGltZSBXYXJuZXIgUm9vdCBDZXJ0
-aWZpY2F0aW9uIEF1dGhvcml0eSAxMB4XDTAyMDUyOTA2MDAwMFoXDTM3MTEyMDE1
-MDMwMFowgYMxCzAJBgNVBAYTAlVTMR0wGwYDVQQKExRBT0wgVGltZSBXYXJuZXIg
-SW5jLjEcMBoGA1UECxMTQW1lcmljYSBPbmxpbmUgSW5jLjE3MDUGA1UEAxMuQU9M
-IFRpbWUgV2FybmVyIFJvb3QgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkgMTCCASIw
-DQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAJnej8Mlo2k06AX3dLm/WpcZuS+U
-0pPlLYnKhHw/EEMbjIt8hFj4JHxIzyr9wBXZGH6EGhfT257XyuTZ16pYUYfw8ItI
-TuLCxFlpMGK2MKKMCxGZYTVtfu/FsRkGIBKOQuHfD5YQUqjPnF+VFNivO3ULMSAf
-RC+iYkGzuxgh28pxPIzstrkNn+9R7017EvILDOGsQI93f7DKeHEMXRZxcKLXwjqF
-zQ6axOAAsNUl6twr5JQtOJyJQVdkKGUZHLZEtMgxa44Be3ZZJX8VHIQIfHNlIAqh
-BC4aMqiaILGcLCFZ5/vP7nAtCMpjPiybkxlqpMKX/7eGV4iFbJ4VFitNLLMCAwEA
-AaNjMGEwDwYDVR0TAQH/BAUwAwEB/zAdBgNVHQ4EFgQUoTYwFsuGkABFgFOxj8jY
-PXy+XxIwHwYDVR0jBBgwFoAUoTYwFsuGkABFgFOxj8jYPXy+XxIwDgYDVR0PAQH/
-BAQDAgGGMA0GCSqGSIb3DQEBBQUAA4IBAQCKIBilvrMvtKaEAEAwKfq0FHNMeUWn
-9nDg6H5kHgqVfGphwu9OH77/yZkfB2FK4V1Mza3u0FIy2VkyvNp5ctZ7CegCgTXT
-Ct8RHcl5oIBN/lrXVtbtDyqvpxh1MwzqwWEFT2qaifKNuZ8u77BfWgDrvq2g+EQF
-Z7zLBO+eZMXpyD8Fv8YvBxzDNnGGyjhmSs3WuEvGbKeXO/oTLW4jYYehY0KswsuX
-n2Fozy1MBJ3XJU8KDk2QixhWqJNIV9xvrr2eZ1d3iVCzvhGbRWeDhhmH05i9CBoW
-H1iCC+GWaQVLjuyDUTEH1dSf/1l7qG6Fz9NLqUmwX7A5KGgOc90lmt4S
------END CERTIFICATE-----

certs/aoltw2.pem

@@ -1,34 +0,0 @@
------BEGIN CERTIFICATE-----
-MIIF5jCCA86gAwIBAgIBATANBgkqhkiG9w0BAQUFADCBgzELMAkGA1UEBhMCVVMx
-HTAbBgNVBAoTFEFPTCBUaW1lIFdhcm5lciBJbmMuMRwwGgYDVQQLExNBbWVyaWNh
-IE9ubGluZSBJbmMuMTcwNQYDVQQDEy5BT0wgVGltZSBXYXJuZXIgUm9vdCBDZXJ0
-aWZpY2F0aW9uIEF1dGhvcml0eSAyMB4XDTAyMDUyOTA2MDAwMFoXDTM3MDkyODIz
-NDMwMFowgYMxCzAJBgNVBAYTAlVTMR0wGwYDVQQKExRBT0wgVGltZSBXYXJuZXIg
-SW5jLjEcMBoGA1UECxMTQW1lcmljYSBPbmxpbmUgSW5jLjE3MDUGA1UEAxMuQU9M
-IFRpbWUgV2FybmVyIFJvb3QgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkgMjCCAiIw
-DQYJKoZIhvcNAQEBBQADggIPADCCAgoCggIBALQ3WggWmRToVbEbJGv8x4vmh6mJ
-7ouZzU9AhqS2TcnZsdw8TQ2FTBVsRotSeJ/4I/1n9SQ6aF3Q92RhQVSji6UI0ilb
-m2BPJoPRYxJWSXakFsKlnUWsi4SVqBax7J/qJBrvuVdcmiQhLE0OcR+mrF1FdAOY
-xFSMFkpBd4aVdQxHAWZg/BXxD+r1FHjHDtdugRxev17nOirYlxcwfACtCJ0zr7iZ
-YYCLqJV+FNwSbKTQ2O9ASQI2+W6p1h2WVgSysy0WVoaP2SBXgM1nEG2wTPDaRrbq
-JS5Gr42whTg0ixQmgiusrpkLjhTXUr2eacOGAgvqdnUxCc4zGSGFQ+aJLZ8lN2fx
-I2rSAG2X+Z/nKcrdH9cG6rjJuQkhn8g/BsXS6RJGAE57COtCPStIbp1n3UsC5ETz
-kxmlJ85per5n0/xQpCyrw2u544BMzwVhSyvcG7mm0tCq9Stz+86QNZ8MUhy/XCFh
-EVsVS6kkUfykXPcXnbDS+gfpj1bkGoxoigTTfFrjnqKhynFbotSg5ymFXQNoKk/S
-Btc9+cMDLz9l+WceR0DTYw/j1Y75hauXTLPXJuuWCpTehTacyH+BCQJJKg71ZDIM
-gtG6aoIbs0t0EfOMd9afv9w3pKdVBC/UMejTRrkDfNoSTllkt1ExMVCgyhwn2RAu
-rda9EGYrw7AiShJbAgMBAAGjYzBhMA8GA1UdEwEB/wQFMAMBAf8wHQYDVR0OBBYE
-FE9pbQN+nZ8HGEO8txBO1b+pxCAoMB8GA1UdIwQYMBaAFE9pbQN+nZ8HGEO8txBO
-1b+pxCAoMA4GA1UdDwEB/wQEAwIBhjANBgkqhkiG9w0BAQUFAAOCAgEAO/Ouyugu
-h4X7ZVnnrREUpVe8WJ8kEle7+z802u6teio0cnAxa8cZmIDJgt43d15Ui47y6mdP
-yXSEkVYJ1eV6moG2gcKtNuTxVBFT8zRFASbI5Rq8NEQh3q0l/HYWdyGQgJhXnU7q
-7C+qPBR7V8F+GBRn7iTGvboVsNIYvbdVgaxTwOjdaRITQrcCtQVBynlQboIOcXKT
-RuidDV29rs4prWPVVRaAMCf/drr3uNZK49m1+VLQTkCpx+XCMseqdiThawVQ68W/
-ClTluUI8JPu3B5wwn3la5uBAUhX0/Kr0VvlEl4ftDmVyXr4m+02kLQgH3thcoNyB
-M5kYJRF3p+v9WAksmWsbivNSPxpNSGDxoPYzAlOL7SUJuA0t7Zdz7NeWH45gDtoQ
-my8YJPamTQr5O8t1wswvziRpyQoijlmn94IM19drNZxDAGrElWe6nEXLuA4399xO
-AU++CrYD062KRffaJ00psUjf5BHklka9bAI+1lHIlRcBFanyqqryvy9lG2/QuRqT
-9Y41xICHPpQvZuTpqP9BnHAqTyo5GJUefvthATxRCC4oGKQWDzH9OmwjkyB24f0H
-hdFbP9IcczLd+rn4jM8Ch3qaluTtT4mNU0OrDhPAARW0eTjb/G49nlG2uBOLZ8/5
-fNkiHfZdxRwBL5joeiQYvITX+txyW/fBOmg=
------END CERTIFICATE-----

certs/argena.pem

@@ -1,39 +0,0 @@
------BEGIN CERTIFICATE-----
-MIIG0zCCBbugAwIBAgIBADANBgkqhkiG9w0BAQUFADCBzDELMAkGA1UEBhMCQVQx
-EDAOBgNVBAgTB0F1c3RyaWExDzANBgNVBAcTBlZpZW5uYTE6MDgGA1UEChMxQVJH
-RSBEQVRFTiAtIEF1c3RyaWFuIFNvY2lldHkgZm9yIERhdGEgUHJvdGVjdGlvbjEl
-MCMGA1UECxMcQS1DRVJUIENlcnRpZmljYXRpb24gU2VydmljZTEYMBYGA1UEAxMP
-QS1DRVJUIEFEVkFOQ0VEMR0wGwYJKoZIhvcNAQkBFg5pbmZvQGEtY2VydC5hdDAe
-Fw0wNDEwMjMxNDE0MTRaFw0xMTEwMjMxNDE0MTRaMIHMMQswCQYDVQQGEwJBVDEQ
-MA4GA1UECBMHQXVzdHJpYTEPMA0GA1UEBxMGVmllbm5hMTowOAYDVQQKEzFBUkdF
-IERBVEVOIC0gQXVzdHJpYW4gU29jaWV0eSBmb3IgRGF0YSBQcm90ZWN0aW9uMSUw
-IwYDVQQLExxBLUNFUlQgQ2VydGlmaWNhdGlvbiBTZXJ2aWNlMRgwFgYDVQQDEw9B
-LUNFUlQgQURWQU5DRUQxHTAbBgkqhkiG9w0BCQEWDmluZm9AYS1jZXJ0LmF0MIIB
-IjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEA3euXIy+mnf6BYKbK+QH5k679
-tUFqeT8jlZxMew8eNiHuw9KoxWBzL6KksK+5uK7Gatw+sbAYntEGE80P+Jg1hADM
-e+Fr5V0bc6QS3gkVtfUCW/RIvfMM39oxvmqJmOgPnJU7H6+nmLtsq61tv9kVJi/2
-4Y5wXW3odet72sF57EoG6s78w0BUVLNcMngS9bZZzmdG3/d6JbkGgoNF/8DcgCBJ
-W/t0JrcIzyppXIOVtUzzOrrU86zuUgT3Rtkl5kjG7DEHpFb9H0fTOY1v8+gRoaO6
-2gA0PCiysgVZjwgVeYe3KAg11nznyleDv198uK3Dc1oXIGYjJx2FpKWUvAuAEwID
-AQABo4ICvDCCArgwHQYDVR0OBBYEFDd/Pj6ZcWDKJNSRE3nQdCm0qCTYMIH5BgNV
-HSMEgfEwge6AFDd/Pj6ZcWDKJNSRE3nQdCm0qCTYoYHSpIHPMIHMMQswCQYDVQQG
-EwJBVDEQMA4GA1UECBMHQXVzdHJpYTEPMA0GA1UEBxMGVmllbm5hMTowOAYDVQQK
-EzFBUkdFIERBVEVOIC0gQXVzdHJpYW4gU29jaWV0eSBmb3IgRGF0YSBQcm90ZWN0
-aW9uMSUwIwYDVQQLExxBLUNFUlQgQ2VydGlmaWNhdGlvbiBTZXJ2aWNlMRgwFgYD
-VQQDEw9BLUNFUlQgQURWQU5DRUQxHTAbBgkqhkiG9w0BCQEWDmluZm9AYS1jZXJ0
-LmF0ggEAMA8GA1UdEwEB/wQFMAMBAf8wCwYDVR0PBAQDAgHmMEcGA1UdJQRAMD4G
-CCsGAQUFBwMBBggrBgEFBQcDAgYIKwYBBQUHAwMGCCsGAQUFBwMEBggrBgEFBQcD
-CAYKKwYBBAGCNwoDBDARBglghkgBhvhCAQEEBAMCAP8wUQYDVR0gBEowSDBGBggq
-KAAYAQEBAzA6MDgGCCsGAQUFBwIBFixodHRwOi8vd3d3LmEtY2VydC5hdC9jZXJ0
-aWZpY2F0ZS1wb2xpY3kuaHRtbDA7BglghkgBhvhCAQgELhYsaHR0cDovL3d3dy5h
-LWNlcnQuYXQvY2VydGlmaWNhdGUtcG9saWN5Lmh0bWwwGQYDVR0RBBIwEIEOaW5m
-b0BhLWNlcnQuYXQwLwYDVR0SBCgwJoEOaW5mb0BhLWNlcnQuYXSGFGh0dHA6Ly93
-d3cuYS1jZXJ0LmF0MEUGA1UdHwQ+MDwwOqA4oDaGNGh0dHBzOi8vc2VjdXJlLmEt
-Y2VydC5hdC9jZ2ktYmluL2EtY2VydC1hZHZhbmNlZC5jZ2kwDQYJKoZIhvcNAQEF
-BQADggEBACX1IvgfdG2rvfv35O48vSEvcVaEdlN8USFBHWz3JRAozgzvaBtwHkjK
-Zwt5l/BWOtjbvHfRjDt7ijlBEcxOOrNC1ffyMHwHrXpvff6YpQ5wnxmIYEQcURiG
-HMqruEX0WkuDNgSKwefsgXs27eeBauHgNGVcTYH1rmHu/ZyLpLxOyJQ2PCzA1DzW
-3rWkIX92ogJ7lTRdWrbxwUL1XGinxnnaQ74+/y0pI9JNEv7ic2tpkweRMpkedaLW
-msC1+orfKTebsg69aMaCx7o6jNONRmR/7TVaPf8/k6g52cHZ9YWjQvup22b5rWxG
-J5r5LZ4vCPmF4+T4lutjUYAa/lGuQTg=
------END CERTIFICATE-----

certs/argeng.pem

@@ -1,23 +0,0 @@
------BEGIN CERTIFICATE-----
-MIIDwzCCAyygAwIBAgIBADANBgkqhkiG9w0BAQQFADCBmDELMAkGA1UEBhMCQVQx
-EDAOBgNVBAgTB0F1c3RyaWExDzANBgNVBAcTBlZpZW5uYTFCMEAGA1UEChM5QXJn
-ZSBEYXRlbiBPZXN0ZXJyZWljaGlzY2hlIEdlc2VsbHNjaGFmdCBmdWVyIERhdGVu
-c2NodXR6MSIwIAYJKoZIhvcNAQkBFhNhLWNlcnRAYXJnZWRhdGVuLmF0MB4XDTAx
-MDIxMjExMzAzMFoXDTA5MDIxMjExMzAzMFowgZgxCzAJBgNVBAYTAkFUMRAwDgYD
-VQQIEwdBdXN0cmlhMQ8wDQYDVQQHEwZWaWVubmExQjBABgNVBAoTOUFyZ2UgRGF0
-ZW4gT2VzdGVycmVpY2hpc2NoZSBHZXNlbGxzY2hhZnQgZnVlciBEYXRlbnNjaHV0
-ejEiMCAGCSqGSIb3DQEJARYTYS1jZXJ0QGFyZ2VkYXRlbi5hdDCBnzANBgkqhkiG
-9w0BAQEFAAOBjQAwgYkCgYEAwgsHqoNtmmrJ86+e1I4hOVBaL4kokqKN2IPOIL+1
-XwY8vfOOUfPEdhWpaC0ldt7VYrksgDiUccgH0FROANWK2GkfKMDzjjXHysR04uEb
-Om7Kqjqn0nproOGkFG+QvBZgs+Ws+HXNFJA6V76fU4+JXq4452LSK4Lr5YcBquu3
-NJECAwEAAaOCARkwggEVMB0GA1UdDgQWBBQ0j59zH/G31zRjgK1y2P//tSAWZjCB
-xQYDVR0jBIG9MIG6gBQ0j59zH/G31zRjgK1y2P//tSAWZqGBnqSBmzCBmDELMAkG
-A1UEBhMCQVQxEDAOBgNVBAgTB0F1c3RyaWExDzANBgNVBAcTBlZpZW5uYTFCMEAG
-A1UEChM5QXJnZSBEYXRlbiBPZXN0ZXJyZWljaGlzY2hlIEdlc2VsbHNjaGFmdCBm
-dWVyIERhdGVuc2NodXR6MSIwIAYJKoZIhvcNAQkBFhNhLWNlcnRAYXJnZWRhdGVu
-LmF0ggEAMAwGA1UdEwQFMAMBAf8wCwYDVR0PBAQDAgEGMBEGCWCGSAGG+EIBAQQE
-AwICBDANBgkqhkiG9w0BAQQFAAOBgQBFuJYncqMYB6gXQS3eDOI90BEHfFTKy/dV
-AV+K7QdAYikWmqgBheRdPKddJdccPy/Zl/p3ZT7GhDyC5f3wZjcuu8AJ27BNwbCA
-x54dgxgCNcyPm79nY8MRtEdEpoRGdSsFKJemz6hpXM++MWFciyrRWIIA44XB0Gv3
-US0spjsDPQ==
------END CERTIFICATE-----

certs/demo/nortelCA.pem

@@ -1,16 +0,0 @@
------BEGIN CERTIFICATE-----
-MIICajCCAdMCBDGA0QUwDQYJKoZIhvcNAQEEBQAwfTELMAkGA1UEBhMCQ2ExDzAN
-BgNVBAcTBk5lcGVhbjEeMBwGA1UECxMVTm8gTGlhYmlsaXR5IEFjY2VwdGVkMR8w
-HQYDVQQKExZGb3IgRGVtbyBQdXJwb3NlcyBPbmx5MRwwGgYDVQQDExNFbnRydXN0
-IERlbW8gV2ViIENBMB4XDTk2MDQyNjEzMzUwMVoXDTA2MDQyNjEzMzUwMVowfTEL
-MAkGA1UEBhMCQ2ExDzANBgNVBAcTBk5lcGVhbjEeMBwGA1UECxMVTm8gTGlhYmls
-aXR5IEFjY2VwdGVkMR8wHQYDVQQKExZGb3IgRGVtbyBQdXJwb3NlcyBPbmx5MRww
-GgYDVQQDExNFbnRydXN0IERlbW8gV2ViIENBMIGdMA0GCSqGSIb3DQEBAQUAA4GL
-ADCBhwKBgQCaroS7O1DA0hm4IefNYU1cx/nqOmzEnk291d1XqznDeF4wEgakbkCc
-zTKxK791yNpXG5RmngqH7cygDRTHZJ6mfCRn0wGC+AI00F2vYTGqPGRQL1N3lZT0
-YDKFC0SQeMMjFIZ1aeQigroFQnHo0VB3zWIMpNkka8PY9lxHZAmWwQIBAzANBgkq
-hkiG9w0BAQQFAAOBgQBAx0UMVA1s54lMQyXjMX5kj99FJN5itb8bK1Rk+cegPQPF
-cWO9SEWyEjjBjIkjjzAwBkaEszFsNGxemxtXvwjIm1xEUMTVlPEWTs2qnDvAUA9W
-YqhWbhH0toGT36236QAsqCZ76rbTRVSSX2BHyJwJMG2tCRv7kRJ//NIgxj3H4w==
------END CERTIFICATE-----
-

certs/demo/timCA.pem

@@ -1,16 +0,0 @@
-Tims test GCI CA
-
------BEGIN CERTIFICATE-----
-MIIB8DCCAZoCAQAwDQYJKoZIhvcNAQEEBQAwgYIxCzAJBgNVBAYTAkFVMRMwEQYD
-VQQIEwpRdWVlbnNsYW5kMREwDwYDVQQHEwhCcmlzYmFuZTEaMBgGA1UEChMRQ3J5
-cHRTb2Z0IFB0eSBMdGQxFDASBgNVBAsTC2RldmVsb3BtZW50MRkwFwYDVQQDExBD
-cnlwdFNvZnQgRGV2IENBMB4XDTk3MDMyMjEzMzQwNFoXDTk4MDMyMjEzMzQwNFow
-gYIxCzAJBgNVBAYTAkFVMRMwEQYDVQQIEwpRdWVlbnNsYW5kMREwDwYDVQQHEwhC
-cmlzYmFuZTEaMBgGA1UEChMRQ3J5cHRTb2Z0IFB0eSBMdGQxFDASBgNVBAsTC2Rl
-dmVsb3BtZW50MRkwFwYDVQQDExBDcnlwdFNvZnQgRGV2IENBMFwwDQYJKoZIhvcN
-AQEBBQADSwAwSAJBAOAOAqogG5QwAmLhzyO4CoRnx/wVy4NZP4dxJy83O1EnL0rw
-OdsamJKvPOLHgSXo3gDu9uVyvCf/QJmZAmC5ml8CAwEAATANBgkqhkiG9w0BAQQF
-AANBADRRS/GVdd7rAqRW6SdmgLJduOU2yq3avBu99kRqbp9A/dLu6r6jU+eP4oOA
-TfdbFZtAAD2Hx9jUtY3tfdrJOb8= 
------END CERTIFICATE-----
-

certs/demo/tjhCA.pem

@@ -1,15 +0,0 @@
------BEGIN CERTIFICATE-----
-MIICVjCCAgACAQAwDQYJKoZIhvcNAQEEBQAwgbUxCzAJBgNVBAYTAkFVMRMwEQYD
-VQQIEwpRdWVlbnNsYW5kMREwDwYDVQQHEwhCcmlzYmFuZTEaMBgGA1UEChMRQ3J5
-cHRTb2Z0IFB0eSBMdGQxLDAqBgNVBAsTI1dPUlRITEVTUyBDRVJUSUZJQ0FUSU9O
-IEFVVEhPUklUSUVTMTQwMgYDVQQDEytaRVJPIFZBTFVFIENBIC0gREVNT05TVFJB
-VElPTiBQVVJQT1NFUyBPTkxZMB4XDTk3MDQwMzEzMjI1NFoXDTk4MDQwMzEzMjI1
-NFowgbUxCzAJBgNVBAYTAkFVMRMwEQYDVQQIEwpRdWVlbnNsYW5kMREwDwYDVQQH
-EwhCcmlzYmFuZTEaMBgGA1UEChMRQ3J5cHRTb2Z0IFB0eSBMdGQxLDAqBgNVBAsT
-I1dPUlRITEVTUyBDRVJUSUZJQ0FUSU9OIEFVVEhPUklUSUVTMTQwMgYDVQQDEyta
-RVJPIFZBTFVFIENBIC0gREVNT05TVFJBVElPTiBQVVJQT1NFUyBPTkxZMFwwDQYJ
-KoZIhvcNAQEBBQADSwAwSAJBAOZ7T7yqP/tyspcko3yPY1y0Cm2EmwNvzW4QgVXR
-Fjs3HmJ4xtSpXdo6mwcGezL3Abt/aQXaxv9PU8xt+Jr0OFUCAwEAATANBgkqhkiG
-9w0BAQQFAANBAOQpYmGgyCqCy1OljgJhCqQOu627oVlHzK1L+t9vBaMfn40AVUR4
-WzQVWO31KTgi5vTK1U+3h46fgUWqQ0h+6rU=
------END CERTIFICATE-----

certs/demo/vsigntca.pem

@@ -1,18 +0,0 @@
-subject=/O=VeriSign, Inc/OU=www.verisign.com/repository/TestCPS Incorp. By Ref. Liab. LTD./OU=For VeriSign authorized testing only. No assurances (C)VS1997
-notBefore=Mar  4 00:00:00 1997 GMT
-notAfter=Mar  4 23:59:59 2025 GMT
------BEGIN CERTIFICATE-----
-MIICTTCCAfcCEEdoCqpuXxnoK27q7d58Qc4wDQYJKoZIhvcNAQEEBQAwgakxFjAU
-BgNVBAoTDVZlcmlTaWduLCBJbmMxRzBFBgNVBAsTPnd3dy52ZXJpc2lnbi5jb20v
-cmVwb3NpdG9yeS9UZXN0Q1BTIEluY29ycC4gQnkgUmVmLiBMaWFiLiBMVEQuMUYw
-RAYDVQQLEz1Gb3IgVmVyaVNpZ24gYXV0aG9yaXplZCB0ZXN0aW5nIG9ubHkuIE5v
-IGFzc3VyYW5jZXMgKEMpVlMxOTk3MB4XDTk3MDMwNDAwMDAwMFoXDTI1MDMwNDIz
-NTk1OVowgakxFjAUBgNVBAoTDVZlcmlTaWduLCBJbmMxRzBFBgNVBAsTPnd3dy52
-ZXJpc2lnbi5jb20vcmVwb3NpdG9yeS9UZXN0Q1BTIEluY29ycC4gQnkgUmVmLiBM
-aWFiLiBMVEQuMUYwRAYDVQQLEz1Gb3IgVmVyaVNpZ24gYXV0aG9yaXplZCB0ZXN0
-aW5nIG9ubHkuIE5vIGFzc3VyYW5jZXMgKEMpVlMxOTk3MFwwDQYJKoZIhvcNAQEB
-BQADSwAwSAJBAMak6xImJx44jMKcbkACy5/CyMA2fqXK4PlzTtCxRq5tFkDzne7s
-cI8oFK/J+gFZNE3bjidDxf07O3JOYG9RGx8CAwEAATANBgkqhkiG9w0BAQQFAANB
-ADT523tENOKrEheZFpsJx1UUjPrG7TwYc/C4NBHrZI4gZJcKVFIfNulftVS6UMYW
-ToLEMaUojc3DuNXHG21PDG8=
------END CERTIFICATE-----

certs/eng1.pem

@@ -1,23 +0,0 @@
------BEGIN CERTIFICATE-----
-MIID3TCCAsWgAwIBAgIBADANBgkqhkiG9w0BAQUFADCBqDELMAkGA1UEBhMCQ0Ex
-CzAJBgNVBAgTAk9OMRAwDgYDVQQHEwdUb3JvbnRvMRgwFgYDVQQKEw9CYW5rRW5n
-aW5lIEluYy4xKTAnBgNVBAsTIENlcnRpZmljYXRpb24gQXV0aG9yaXR5IERpdmlz
-aW9uMRMwEQYDVQQDEwpiYW5rZW5naW5lMSAwHgYJKoZIhvcNAQkBFhFjYUBiYW5r
-ZW5naW5lLmNvbTAeFw05ODAxMDEwMDAwMDBaFw0zODAxMTcwMDAwMDBaMIGoMQsw
-CQYDVQQGEwJDQTELMAkGA1UECBMCT04xEDAOBgNVBAcTB1Rvcm9udG8xGDAWBgNV
-BAoTD0JhbmtFbmdpbmUgSW5jLjEpMCcGA1UECxMgQ2VydGlmaWNhdGlvbiBBdXRo
-b3JpdHkgRGl2aXNpb24xEzARBgNVBAMTCmJhbmtlbmdpbmUxIDAeBgkqhkiG9w0B
-CQEWEWNhQGJhbmtlbmdpbmUuY29tMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIB
-CgKCAQEA14LoTUAl1/hEy+Kh1kLHiBdW2zD3V4IhM7xxTVKsYsIH56nr69ATTIxU
-P36eRzeZ137qt1AxHFjDCidk3m1Ul6l59ProPexdslLLM2npM3f2cteg+toyiYiS
-EJKjyzIu1xF1j9qzGkymSY/4DsXLZNk9FaczxMk/Ooc6Os1M3AverL4VG4rYIb6f
-eR32cIKJ9Q1fGuyKk7ipq1XQfPW8a8TgZdbHbe7U9Gk3iasGMHHvpR9Ep3mGbgdT
-uQ98SBEuIwe1BUCGg/MXpVy48MNXfAMotBgGw4pl9yqSjMni2FB+E9Q9DHFs2RgX
-MqzKuo8zcPxKx2kZ6Arj8+27dw2clQIDAQABoxAwDjAMBgNVHRMEBTADAQH/MA0G
-CSqGSIb3DQEBBQUAA4IBAQBauupHX9EhpC/r57d6b5kkeWvognxIP9//TO4iw3qb
-zIXEkPXmJmwVzlzoKJWqiya+aw19SP0+G6CzsFOBo/9ehmz+hZ8bhYX4MjlWzX5u
-Tnkhz172j9fOBUmrTVPkcRIs6zjCD5PQAGoBPP1/Zdy2N36lZ0U7lg07Opirj/yJ
-PSJeM2j0fwIFAroiVckvdT0BVwB6S/cPaAQGPghbbr1YGSmYrMriSv825ILJUfxz
-rJYunGR9FiY9Ob7+jwJwiZMS4CxSPktutxr/3hOvr1+ALS7IcVakhhA3PuZAJbdH
-FRclR9qMM8aBnBZmf+Uv3K3uhT+UBzzY654U9Yi1JYnA
------END CERTIFICATE-----

certs/eng2.pem

@@ -1,23 +0,0 @@
------BEGIN CERTIFICATE-----
-MIID3TCCAsWgAwIBAgIBADANBgkqhkiG9w0BAQUFADCBqDELMAkGA1UEBhMCQ0Ex
-CzAJBgNVBAgTAk9OMRAwDgYDVQQHEwdUb3JvbnRvMRgwFgYDVQQKEw9DZXJ0RW5n
-aW5lIEluYy4xKTAnBgNVBAsTIENlcnRpZmljYXRpb24gQXV0aG9yaXR5IERpdmlz
-aW9uMRMwEQYDVQQDEwpjZXJ0ZW5naW5lMSAwHgYJKoZIhvcNAQkBFhFjYUBjZXJ0
-ZW5naW5lLmNvbTAeFw05ODAxMDEwMDAwMDBaFw0zODAxMTcwMDAwMDBaMIGoMQsw
-CQYDVQQGEwJDQTELMAkGA1UECBMCT04xEDAOBgNVBAcTB1Rvcm9udG8xGDAWBgNV
-BAoTD0NlcnRFbmdpbmUgSW5jLjEpMCcGA1UECxMgQ2VydGlmaWNhdGlvbiBBdXRo
-b3JpdHkgRGl2aXNpb24xEzARBgNVBAMTCmNlcnRlbmdpbmUxIDAeBgkqhkiG9w0B
-CQEWEWNhQGNlcnRlbmdpbmUuY29tMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIB
-CgKCAQEA7aTXURShaeVt9u/dP3Q2dVib3jTCZvEyc6yfpGgaYWewXWuP4HOSfI4h
-GZblbpl+dzJc6RjhR+pguIRtbT5FJB8SJGjRqoujBEOQOxtVtc2fjM9Dqh0iOvMW
-WS6buxHG55GVrHAQaO5HXEScKQBa9ZyNmpSXPTEBrDMej1OAGOkc524/TZrgFPF4
-AiJLLkxCcP8NuzUKlW3WzNMSSoCtjkUKy4wjSLlAWCFM0T9Df6/+Z8ZUQTzHoKCD
-ncH5Qnynd7DlOwKQ2JwwxRhYGiGVTUN0GUq7qA11kW3+vnbFesKQXoF6o2PVx9s2
-YXviI2NXXUjZ0pVnsnFCc45Pm8XojwIDAQABoxAwDjAMBgNVHRMEBTADAQH/MA0G
-CSqGSIb3DQEBBQUAA4IBAQBP/aHOKJ00Akzc9HWM1X30hlWZFBaQi4pqD4Uhk8+p
-KzzwFP5DRLBOz8TYBbtdXrS6hxVMr2sqWmhVkuyepWhHZazKGyHY/y0FbOXsewAV
-1QxxSyx7ve89pCKv4/w0rQcP916iHc8Y/TCpmz7eITa3GId+8H/XTaBi8GBp9X9O
-w8m25FmEB1NT+eJwefvfdKowjy4tSorKdW/eJspxNuTSRGmUy8G71W5dYvgpAlx6
-mdnHyzxEGvRYNNI2bS0ifXgbEFNWqSas9q34ea5KOpkJu8T/KyXfSb6rPOsBSb0t
-wMowwGtCVH2C4Lw/8zo0EjhMpTOsPaub408PrZ+NQ2bl
------END CERTIFICATE-----