Time to release 0.9.7a.

The tag will be OpenSSL_0_9_7a.
Security fix: Vaudenay timing attack on CBC.
2003-02-19 12:33:55 +00:00 · 2003-02-19 12:04:16 +00:00 · 2003-02-19 11:54:57 +00:00 · 2003-02-19 11:22:18 +00:00 · 2003-02-18 12:15:13 +00:00 · 2003-02-16 20:10:26 +00:00
219 changed files with 3476 additions and 1904 deletions
--- a/131
+++ b/131
@@ -2,7 +2,116 @@
 OpenSSL CHANGES
 _______________

- Changes between 0.9.6h and 0.9.7  [XX xxx 2002]
+ Changes between 0.9.7 and 0.9.7a  [19 Feb 2003]
+
+  *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
+     via timing by performing a MAC computation even if incorrrect
+     block cipher padding has been found.  This is a countermeasure
+     against active attacks where the attacker has to distinguish
+     between bad padding and a MAC verification error. (CAN-2003-0078)
+
+     [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
+     Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
+     Martin Vuagnoux (EPFL, Ilion)]
+
+  *) Make the no-err option work as intended.  The intention with no-err
+     is not to have the whole error stack handling routines removed from
+     libcrypto, it's only intended to remove all the function name and
+     reason texts, thereby removing some of the footprint that may not
+     be interesting if those errors aren't displayed anyway.
+
+     NOTE: it's still possible for any application or module to have it's
+     own set of error texts inserted.  The routines are there, just not
+     used by default when no-err is given.
+     [Richard Levitte]
+
+  *) Add support for FreeBSD on IA64.
+     [dirk.meyer@dinoex.sub.org via Richard Levitte, resolves #454]
+
+  *) Adjust DES_cbc_cksum() so it returns the same value as the MIT
+     Kerberos function mit_des_cbc_cksum().  Before this change,
+     the value returned by DES_cbc_cksum() was like the one from
+     mit_des_cbc_cksum(), except the bytes were swapped.
+     [Kevin Greaney <Kevin.Greaney@hp.com> and Richard Levitte]
+
+  *) Allow an application to disable the automatic SSL chain building.
+     Before this a rather primitive chain build was always performed in
+     ssl3_output_cert_chain(): an application had no way to send the 
+     correct chain if the automatic operation produced an incorrect result.
+
+     Now the chain builder is disabled if either:
+
+     1. Extra certificates are added via SSL_CTX_add_extra_chain_cert().
+
+     2. The mode flag SSL_MODE_NO_AUTO_CHAIN is set.
+
+     The reasoning behind this is that an application would not want the
+     auto chain building to take place if extra chain certificates are
+     present and it might also want a means of sending no additional
+     certificates (for example the chain has two certificates and the
+     root is omitted).
+     [Steve Henson]
+
+  *) Add the possibility to build without the ENGINE framework.
+     [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
+
+  *) Under Win32 gmtime() can return NULL: check return value in
+     OPENSSL_gmtime(). Add error code for case where gmtime() fails.
+     [Steve Henson]
+
+  *) DSA routines: under certain error conditions uninitialized BN objects
+     could be freed. Solution: make sure initialization is performed early
+     enough. (Reported and fix supplied by Ivan D Nestlerode <nestler@MIT.EDU>,
+     Nils Larsch <nla@trustcenter.de> via PR#459)
+     [Lutz Jaenicke]
+
+  *) Another fix for SSLv2 session ID handling: the session ID was incorrectly
+     checked on reconnect on the client side, therefore session resumption
+     could still fail with a "ssl session id is different" error. This
+     behaviour is masked when SSL_OP_ALL is used due to
+     SSL_OP_MICROSOFT_SESS_ID_BUG being set.
+     Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
+     followup to PR #377.
+     [Lutz Jaenicke]
+
+  *) IA-32 assembler support enhancements: unified ELF targets, support
+     for SCO/Caldera platforms, fix for Cygwin shared build.
+     [Andy Polyakov]
+
+  *) Add support for FreeBSD on sparc64.  As a consequence, support for
+     FreeBSD on non-x86 processors is separate from x86 processors on
+     the config script, much like the NetBSD support.
+     [Richard Levitte & Kris Kennaway <kris@obsecurity.org>]
+
+ Changes between 0.9.6h and 0.9.7  [31 Dec 2002]
+
+  *) Fix session ID handling in SSLv2 client code: the SERVER FINISHED
+     code (06) was taken as the first octet of the session ID and the last
+     octet was ignored consequently. As a result SSLv2 client side session
+     caching could not have worked due to the session ID mismatch between
+     client and server.
+     Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
+     PR #377.
+     [Lutz Jaenicke]
+
+  *) Change the declaration of needed Kerberos libraries to use EX_LIBS
+     instead of the special (and badly supported) LIBKRB5.  LIBKRB5 is
+     removed entirely.
+     [Richard Levitte]
+
+  *) The hw_ncipher.c engine requires dynamic locks.  Unfortunately, it
+     seems that in spite of existing for more than a year, many application
+     author have done nothing to provide the necessary callbacks, which
+     means that this particular engine will not work properly anywhere.
+     This is a very unfortunate situation which forces us, in the name
+     of usability, to give the hw_ncipher.c a static lock, which is part
+     of libcrypto.
+     NOTE: This is for the 0.9.7 series ONLY.  This hack will never
+     appear in 0.9.8 or later.  We EXPECT application authors to have
+     dealt properly with this when 0.9.8 is released (unless we actually
+     make such changes in the libcrypto locking code that changes will
+     have to be made anyway).
+     [Richard Levitte]

  *) In asn1_d2i_read_bio() repeatedly call BIO_read() until all content
     octets have been read, EOF or an error occurs. Without this change
@@ -149,7 +258,7 @@
 	# is assumed to contain the absolute OpenSSL source directory.
 	mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
 	cd objtree/"`uname -s`-`uname -r`-`uname -m`"
-	(cd $OPENSSL_SOURCE; find . -type f -o -type l) | while read F; do
+	(cd $OPENSSL_SOURCE; find . -type f) | while read F; do
 		mkdir -p `dirname $F`
 		ln -s $OPENSSL_SOURCE/$F $F
 	done
@@ -1649,6 +1758,11 @@ des-cbc           3624.96k     5258.21k     5530.91k     5624.30k     5628.26k
     be reduced modulo  m.
     [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]

+#if 0
+     The following entry accidentily appeared in the CHANGES file
+     distributed with OpenSSL 0.9.7.  The modifications described in
+     it do *not* apply to OpenSSL 0.9.7.
+
  *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
     was actually never needed) and in BN_mul().  The removal in BN_mul()
     required a small change in bn_mul_part_recursive() and the addition
@@ -1657,6 +1771,7 @@ des-cbc           3624.96k     5258.21k     5530.91k     5624.30k     5628.26k
     bn_sub_words() and bn_add_words() except they take arrays with
     differing sizes.
     [Richard Levitte]
+#endif

  *) In 'openssl passwd', verify passwords read from the terminal
     unless the '-salt' option is used (which usually means that
@@ -1788,6 +1903,18 @@ des-cbc           3624.96k     5258.21k     5530.91k     5624.30k     5628.26k
  *) Clean old EAY MD5 hack from e_os.h.
     [Richard Levitte]

+ Changes between 0.9.6h and 0.9.6i  [19 Feb 2003]
+
+  *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
+     via timing by performing a MAC computation even if incorrrect
+     block cipher padding has been found.  This is a countermeasure
+     against active attacks where the attacker has to distinguish
+     between bad padding and a MAC verification error. (CAN-2003-0078)
+
+     [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
+     Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
+     Martin Vuagnoux (EPFL, Ilion)]
+
 Changes between 0.9.6g and 0.9.6h  [5 Dec 2002]

  *) New function OPENSSL_cleanse(), which is used to cleanse a section of
--- a/146
+++ b/146
@@ -10,7 +10,7 @@ use strict;

 # see INSTALL for instructions.

-my $usage="Usage: Configure [no-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-Kxxx] [no-hw-xxx|no-hw] [[no-]threads] [[no-]shared] [[no-]zlib|zlib-dynamic] [no-asm] [no-dso] [no-krb5] [386] [--prefix=DIR] [--openssldir=OPENSSLDIR] [--with-xxx[=vvv]] [--test-sanity] os/compiler[:flags]\n";
+my $usage="Usage: Configure [no-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-Kxxx] [no-engine] [no-hw-xxx|no-hw] [[no-]threads] [[no-]shared] [[no-]zlib|zlib-dynamic] [no-asm] [no-dso] [no-krb5] [386] [--prefix=DIR] [--openssldir=OPENSSLDIR] [--with-xxx[=vvv]] [--test-sanity] os/compiler[:flags]\n";

 # Options:
 #
@@ -38,6 +38,7 @@ my $usage="Usage: Configure [no-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-
 # --test-sanity Make a number of sanity checks on the data in this file.
 #               This is a debugging tool for OpenSSL developers.
 #
+# no-engine     do not compile in any engine code.
 # no-hw-xxx     do not compile support for specific crypto hardware.
 #               Generic OpenSSL-style methods relating to this support
 #               are always compiled but return NULL if the hardware
@@ -107,7 +108,6 @@ my $tlib="-lnsl -lsocket";
 my $bits1="THIRTY_TWO_BIT ";
 my $bits2="SIXTY_FOUR_BIT ";

-my $x86_sol_asm="asm/bn86-sol.o asm/co86-sol.o:asm/dx86-sol.o asm/yx86-sol.o:asm/bx86-sol.o:asm/mx86-sol.o:asm/sx86-sol.o:asm/cx86-sol.o:asm/rx86-sol.o:asm/rm86-sol.o:asm/r586-sol.o";
 my $x86_elf_asm="asm/bn86-elf.o asm/co86-elf.o:asm/dx86-elf.o asm/yx86-elf.o:asm/bx86-elf.o:asm/mx86-elf.o:asm/sx86-elf.o:asm/cx86-elf.o:asm/rx86-elf.o:asm/rm86-elf.o:asm/r586-elf.o";
 my $x86_out_asm="asm/bn86-out.o asm/co86-out.o:asm/dx86-out.o asm/yx86-out.o:asm/bx86-out.o:asm/mx86-out.o:asm/sx86-out.o:asm/cx86-out.o:asm/rx86-out.o:asm/rm86-out.o:asm/r586-out.o";
 my $x86_bsdi_asm="asm/bn86bsdi.o asm/co86bsdi.o:asm/dx86bsdi.o asm/yx86bsdi.o:asm/bx86bsdi.o:asm/mx86bsdi.o:asm/sx86bsdi.o:asm/cx86bsdi.o:asm/rx86bsdi.o:asm/rm86bsdi.o:asm/r586bsdi.o";
@@ -161,25 +161,25 @@ my %table=(
 # surrounds it with #APP #NO_APP comment pair which (at least Solaris
 # 7_x86) /usr/ccs/bin/as fails to assemble with "Illegal mnemonic"
 # error message.
-"solaris-x86-gcc","gcc:-O3 -fomit-frame-pointer -m486 -Wall -DL_ENDIAN -DOPENSSL_NO_INLINE_ASM::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_sol_asm}:dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-x86-gcc","gcc:-O3 -fomit-frame-pointer -m486 -Wall -DL_ENDIAN -DOPENSSL_NO_INLINE_ASM::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",

 #### Solaris x86 with Sun C setups
 "solaris-x86-cc","cc:-fast -O -Xa::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",

 #### SPARC Solaris with GNU C setups
-"solaris-sparcv7-gcc","gcc:-O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"solaris-sparcv8-gcc","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv7-gcc","gcc:-O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv8-gcc","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # -m32 should be safe to add as long as driver recognizes -mcpu=ultrasparc
-"solaris-sparcv9-gcc","gcc:-m32 -mcpu=ultrasparc -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"solaris64-sparcv9-gcc31","gcc:-mcpu=ultrasparc -m64 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o::::::dlfcn:solaris-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv9-gcc","gcc:-m32 -mcpu=ultrasparc -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris64-sparcv9-gcc31","gcc:-mcpu=ultrasparc -m64 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o::::::dlfcn:solaris-shared:-fPIC:-m64 -shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # gcc pre-2.8 doesn't understand -mcpu=ultrasparc, so fall down to -mv8
 # but keep the assembler modules.
-"solaris-sparcv9-gcc27","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus-gcc27.o:::asm/md5-sparcv8plus-gcc27.o::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"solaris64-sparcv9-gcc","gcc:-m64 -mcpu=ultrasparc -O3 -Wall -DB_ENDIAN::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o::::::dlfcn:solaris-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv9-gcc27","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus-gcc27.o:::asm/md5-sparcv8plus-gcc27.o::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris64-sparcv9-gcc","gcc:-m64 -mcpu=ultrasparc -O3 -Wall -DB_ENDIAN::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o::::::dlfcn:solaris-shared:-fPIC:-m64 -shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",

 ####
-"debug-solaris-sparcv8-gcc","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -O -g -mv8 -Wall -DB_ENDIAN::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-solaris-sparcv9-gcc","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -O -g -mcpu=ultrasparc -Wall -DB_ENDIAN::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-solaris-sparcv8-gcc","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -O -g -mv8 -Wall -DB_ENDIAN::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-solaris-sparcv9-gcc","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -O -g -mcpu=ultrasparc -Wall -DB_ENDIAN::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",

 #### SPARC Solaris with Sun C setups
 # DO NOT use /xO[34] on sparc with SC3.0.  It is broken, and will not pass the tests
@@ -203,9 +203,8 @@ my %table=(
 # it's a real mess with -mcpu=ultrasparc option under Linux, but
 # -Wa,-Av8plus should do the trick no matter what.
 "linux-sparcv9","gcc:-mcpu=ultrasparc -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -Wa,-Av8plus -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-# !!!Folowing can't be even tested yet!!!
-#    We have to wait till 64-bit glibc for SPARC is operational!!!
-#"linux64-sparcv9","sparc64-linux-gcc:-m64 -mcpu=v9 -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DBN_DIV2W::-D_REENTRANT:ULTRASPARC::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::::asm/md5-sparcv9.o:",
+# GCC 3.1 is a requirement
+"linux64-sparcv9","gcc:-m64 -mcpu=ultrasparc -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT:ULTRASPARC:-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::::asm/md5-sparcv9.o::::::dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",

 # Sunos configs, assuming sparc for the gcc one.
 ##"sunos-cc", "cc:-O4 -DNOPROTO -DNOCONST::(unknown):SUNOS::DES_UNROLL:::",
@@ -263,22 +262,21 @@ my %table=(
 "hpux64-parisc-gcc","gcc:-DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dlfcn:hpux64-shared:-fpic::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",

 # IA-64 targets
-# I have no idea if this one actually works, feedback needed. <appro>
-"hpux-ia64-cc","cc:-Ae +DD32 +O3 +ESlit -z -DB_ENDIAN::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/ia64-cpp.o:::::::::dlfcn:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux-ia64-cc","cc:-Ae +DD32 +O3 +Olit=all -z -DB_ENDIAN::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/ia64-cpp.o:::::::::dlfcn:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # Frank Geurts <frank.geurts@nl.abnamro.com> has patiently assisted with
 # with debugging of the following config.
-"hpux64-ia64-cc","cc:-Ae +DD64 +O3 +ESlit -z -DB_ENDIAN::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/ia64-cpp.o:::::::::dlfcn:hpux64-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux64-ia64-cc","cc:-Ae +DD64 +O3 +Olit=all -z -DB_ENDIAN::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/ia64-cpp.o:::::::::dlfcn:hpux64-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",

 # More attempts at unified 10.X and 11.X targets for HP C compiler.
 #
 # Chris Ruemmler <ruemmler@cup.hp.com>
 # Kevin Steves <ks@hp.se>
-"hpux-parisc-cc","cc:+O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"hpux-parisc2-cc","cc:+DA2.0 +DS2.0 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2.o:::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"hpux64-parisc2-cc","cc:+DD64 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2W.o:::::::::dlfcn:hpux64-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux-parisc-cc","cc:+O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux-parisc2-cc","cc:+DA2.0 +DS2.0 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2.o:::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux64-parisc2-cc","cc:+DD64 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2W.o:::::::::dlfcn:hpux64-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # Isn't the line below meaningless? HP-UX cc optimizes for host by default.
 # hpux-parisc1_0-cc with +DAportable flag would make more sense. <appro>
-"hpux-parisc1_1-cc","cc:+DA1.1 +DS1.1 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux-parisc1_1-cc","cc:+DA1.1 +DS1.1 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",

 # HPUX 9.X config.
 # Don't use the bundled cc.  It is broken.  Use HP ANSI C if possible, or
@@ -385,18 +383,20 @@ my %table=(
 "debug-linux-elf","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -m486 -Wall::-D_REENTRANT::-lefence -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-linux-elf-noefence","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -m486 -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn",
 "linux-aout",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}",
-"linux-mipsel",   "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::(unknown):::BN_LLONG:::",
-"linux-mips",   "gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::(unknown):::BN_LLONG:::",
+"linux-mipsel",   "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL DES_RISC2::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-mips",   "gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL DES_RISC2::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-ppc",    "gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_RISC1 DES_UNROLL::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-m68k",   "gcc:-DB_ENDIAN -DTERMIO -O2 -fomit-frame-pointer -Wall::-D_REENTRANT:::BN_LLONG::",
 "linux-s390",	"gcc:-DB_ENDIAN -DTERMIO -DNO_ASM -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-s390x",	"gcc:-DB_ENDIAN -DTERMIO -DNO_ASM -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-ia64",   "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK RC4_CHAR:asm/ia64.o:::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"linux-x86_64", "gcc:-DL_ENDIAN -DNO_ASM ::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-x86_64", "gcc:-m64 -DL_ENDIAN -DTERMIO -O3 -Wall -DMD32_REG_T=int::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK RC4_CHAR BF_PTR2 DES_INT DES_UNROLL:asm/x86_64-gcc.o:::::::::dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "NetBSD-sparc",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -mv8 -Wall -DB_ENDIAN::(unknown):::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "NetBSD-m68",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -Wall -DB_ENDIAN::(unknown):::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "NetBSD-x86",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -m486 -Wall::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "FreeBSD-elf",  "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::-pthread -D_REENTRANT -D_THREAD_SAFE -D_THREADSAFE:::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"FreeBSD-sparc64","gcc:-DB_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer::-pthread -D_REENTRANT -D_THREAD_SAFE -D_THREADSAFE:::SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2 BF_PTR::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"FreeBSD-ia64","gcc:-DL_ENDIAN -DTERMIOS -O -fomit-frame-pointer::(unknown):::SIXTY_FOUR_BIT_LONG RC4_CHUNK RC4_CHAR:asm/ia64-cpp.o:::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "FreeBSD",      "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}",
 "bsdi-gcc",     "gcc:-O3 -ffast-math -DL_ENDIAN -DPERL5 -m486::(unknown):::RSA_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_bsdi_asm}",
 "bsdi-elf-gcc",     "gcc:-DPERL5 -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown)::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
@@ -404,7 +404,7 @@ my %table=(
 "nextstep3.3",	"cc:-O3 -Wall:<libc.h>:(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:::",

 # NCR MP-RAS UNIX ver 02.03.01
-"ncr-scde","cc:-O6 -Xa -Hoff=BEHAVED -686 -Hwide -Hiw::(unknown)::-lsocket -lnsl:${x86_gcc_des} ${x86_gcc_opts}:::",
+"ncr-scde","cc:-O6 -Xa -Hoff=BEHAVED -686 -Hwide -Hiw::(unknown)::-lsocket -lnsl -lc89:${x86_gcc_des} ${x86_gcc_opts}:::",

 # QNX 4
 "qnx4",	"cc:-DL_ENDIAN -DTERMIO::(unknown):::${x86_gcc_des} ${x86_gcc_opts}:",
@@ -415,33 +415,36 @@ my %table=(
 # Linux on ARM
 "linux-elf-arm","gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT:::BN_LLONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",

+# SCO/Caldera targets.
+#
+# Originally we had like unixware-*, unixware-*-pentium, unixware-*-p6, etc.
+# Now we only have blended unixware-* as it's the only one used by ./config.
+# If you want to optimize for particular microarchitecture, bypass ./config
+# and './Configure unixware-7 -Kpentium_pro' or whatever appropriate.
+# Note that not all targets include assembler support. Mostly because of
+# lack of motivation to support out-of-date platforms with out-of-date
+# compiler drivers and assemblers. Tim Rice <tim@multitalents.net> has
+# patiently assisted to debug most of it.
+#
 # UnixWare 2.0x fails destest with -O
 "unixware-2.0","cc:-DFILIO_H -DNO_STRINGS_H::-Kthread::-lsocket -lnsl -lresolv -lx:${x86_gcc_des} ${x86_gcc_opts}:::",
-"unixware-2.0-pentium","cc:-DFILIO_H -DNO_STRINGS_H -Kpentium::-Kthread::-lsocket -lnsl -lresolv -lx:MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
-
-# UnixWare 2.1
 "unixware-2.1","cc:-O -DFILIO_H::-Kthread::-lsocket -lnsl -lresolv -lx:${x86_gcc_des} ${x86_gcc_opts}:::",
-"unixware-2.1-pentium","cc:-O -DFILIO_H -Kpentium::-Kthread::-lsocket -lnsl -lresolv -lx:MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
-"unixware-2.1-p6","cc:-O -DFILIO_H -Kp6::-Kthread::-lsocket -lnsl -lresolv -lx:MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
+"unixware-7","cc:-O -DFILIO_H -Kalloca::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}:${x86_elf_asm}:dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"unixware-7-gcc","gcc:-DL_ENDIAN -DFILIO_H -O3 -fomit-frame-pointer -m486 -Wall::-D_REENTRANT::-lsocket -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:gnu-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"OpenUNIX-8","cc:-O -DFILIO_H -Kalloca::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}:${x86_elf_asm}:dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"OpenUNIX-8-gcc","gcc:-O -DFILIO_H -fomit-frame-pointer::-pthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}:${x86_elf_asm}:dlfcn:svr5-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"sco3-gcc",  "gcc:-O3 -fomit-frame-pointer -Dssize_t=int -DNO_SYS_UN_H::(unknown)::-lsocket:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:::", # the SCO assembler doesn't seem to like our assembler files ...
+# SCO 5 - Ben Laurie <ben@algroup.co.uk> says the -O breaks the SCO cc.
+"sco5-cc",  "cc:-belf::(unknown)::-lsocket -lnsl:${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:svr3-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"sco5-gcc",  "gcc:-O3 -fomit-frame-pointer::(unknown)::-lsocket -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:svr3-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",

-# UnixWare 7
-"unixware-7","cc:-O -DFILIO_H -Kalloca::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"unixware-7-pentium","cc:-O -DFILIO_H -Kalloca -Kpentium::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"unixware-7-pentium_pro","cc:-O -DFILIO_H -Kalloca -Kpentium_pro::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"unixware-7-gcc","gcc:-DL_ENDIAN -DFILIO_H -O3 -fomit-frame-pointer -m486 -Wall::-D_REENTRANT::-lsocket -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:gnu-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-
-# OpenUNIX 8
-"OpenUNIX-8","cc:-O -DFILIO_H -Kalloca::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"OpenUNIX-8-gcc","gcc:-O -DFILIO_H -fomit-frame-pointer::-pthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"OpenUNIX-8-pentium","cc:-O -DFILIO_H -Kalloca -Kpentium::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"OpenUNIX-8-pentium_pro","cc:-O -DFILIO_H -Kalloca -Kpentium_pro::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",

 # IBM's AIX.
 "aix-cc",   "cc:-O -DB_ENDIAN -qmaxmem=16384::(unknown):AIX::BN_LLONG RC4_CHAR:::",
 "aix-gcc",  "gcc:-O3 -DB_ENDIAN::(unknown):AIX::BN_LLONG RC4_CHAR:::",
-"aix43-cc",   "cc:-O -DAIX -DB_ENDIAN -qmaxmem=16384::(unknown):::BN_LLONG RC4_CHAR::::::::::dlfcn:",
+"aix43-cc",   "cc:-O -DAIX -DB_ENDIAN -qmaxmem=16384::(unknown):::BN_LLONG RC4_CHAR::::::::::dlfcn:aix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)::",
 "aix43-gcc",  "gcc:-O1 -DAIX -DB_ENDIAN::(unknown):::BN_LLONG RC4_CHAR::::::::::dlfcn:",
-"aix64-cc",   "cc:-O -DAIX -DB_ENDIAN -qmaxmem=16384 -q64::(unknown):::SIXTY_FOUR_BIT_LONG RC4_CHAR::::::::::dlfcn::::::-X 64",
+"aix64-cc",   "cc:-O -DAIX -DB_ENDIAN -qmaxmem=16384 -q64::(unknown):::SIXTY_FOUR_BIT_LONG RC4_CHAR::::::::::dlfcn:aix-shared::-q64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)::-X 64",

 #
 # Cray T90 and similar (SDSC)
@@ -474,15 +477,6 @@ my %table=(
 "dgux-R4-gcc",	"gcc:-O3 -fomit-frame-pointer::(unknown)::-lnsl -lsocket:RC4_INDEX DES_UNROLL:::",
 "dgux-R4-x86-gcc",	"gcc:-O3 -fomit-frame-pointer -DL_ENDIAN::(unknown)::-lnsl -lsocket:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",

-# SCO 3 - Tim Rice <tim@multitalents.net>
-"sco3-gcc",  "gcc:-O3 -fomit-frame-pointer -Dssize_t=int -DNO_SYS_UN_H::(unknown)::-lsocket:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:::", # the SCO assembler doesn't seem to like our assembler files ...
-
-# SCO 5 - Ben Laurie <ben@algroup.co.uk> says the -O breaks the
-# SCO cc.
-"sco5-cc",  "cc:-belf::(unknown)::-lsocket -lresolv -lnsl:${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:svr3-shared:-Kpic", # des options?
-"sco5-cc-pentium",  "cc:-Kpentium::(unknown)::-lsocket:${x86_gcc_des} ${x86_gcc_opts}:::", # des options?
-"sco5-gcc",  "gcc:-O3 -fomit-frame-pointer::(unknown)::-lsocket -lresolv -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:svr3-shared:-fPIC", # the SCO assembler doesn't seem to like our assembler files ...
-
 # Sinix/ReliantUNIX RM400
 # NOTE: The CDS++ Compiler up to V2.0Bsomething has the IRIX_CC_BUG optimizer problem. Better use -g  */
 "ReliantUNIX","cc:-KPIC -g -DTERMIOS -DB_ENDIAN::-Kthread:SNI:-lsocket -lnsl -lc -L/usr/ucblib -lucb:BN_LLONG DES_PTR DES_RISC2 DES_UNROLL BF_PTR::::::::::dlfcn:reliantunix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
@@ -509,7 +503,7 @@ my %table=(
 "VC-MSDOS","cl:::(unknown):MSDOS::BN_LLONG MD2_CHAR DES_UNROLL DES_PTR RC4_INDEX SIXTEEN_BIT:::",

 # Borland C++ 4.5
-"BC-32","bcc32::::WIN32::BN_LLONG DES_PTR RC4_INDEX::::::::::win32",
+"BC-32","bcc32::::WIN32::BN_LLONG DES_PTR RC4_INDEX EXPORT_VAR_AS_FN::::::::::win32",
 "BC-16","bcc:::(unknown):WIN16::BN_LLONG DES_PTR RC4_INDEX SIXTEEN_BIT:::",

 # Mingw32
@@ -528,7 +522,7 @@ my %table=(
 "DJGPP", "gcc:-I/dev/env/WATT_ROOT/inc -DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O2 -Wall:::MSDOS:-L/dev/env/WATT_ROOT/lib -lwatt:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::",

 # Ultrix from Bernhard Simon <simon@zid.tuwien.ac.at>
-"ultrix-cc","cc:-std1 -O -Olimit 1000 -DL_ENDIAN::(unknown):::::::",
+"ultrix-cc","cc:-std1 -O -Olimit 2500 -DL_ENDIAN::(unknown):::::::",
 "ultrix-gcc","gcc:-O3 -DL_ENDIAN::(unknown):::::::",
 # K&R C is no longer supported; you need gcc on old Ultrix installations
 ##"ultrix","cc:-O2 -DNOPROTO -DNOCONST -DL_ENDIAN::(unknown):::::::",
@@ -657,6 +651,7 @@ my $openssl_thread_defines;
 my $openssl_sys_defines="";
 my $openssl_other_defines;
 my $libs;
+my $libkrb5="";
 my $target;
 my $options;
 my $symlink;
@@ -697,6 +692,11 @@ PROCESS_ARGS:
 			$flags .= "-DOPENSSL_NO_ASM ";
 			$openssl_other_defines .= "#define OPENSSL_NO_ASM\n";
 			}
+		elsif (/^no-err$/)
+		 	{
+			$flags .= "-DOPENSSL_NO_ERR ";
+			$openssl_other_defines .= "#define OPENSSL_NO_ERR\n";
+			}
 		elsif (/^no-hw-(.+)$/)
 			{
 			my $hw=$1;
@@ -957,6 +957,8 @@ my $shared_extension = $fields[$idx_shared_extension];
 my $ranlib = $fields[$idx_ranlib];
 my $arflags = $fields[$idx_arflags];

+my $no_shared_warn=0;
+
 $cflags="$flags$cflags" if ($flags ne "");

 # Kerberos settings.  The flavor must be provided from outside, either through
@@ -1017,7 +1019,7 @@ else
 			}
 		}
 	$withargs{"krb5-lib"} .= " -lresolv"
-		if ("$lresolv");
+		if ("$lresolv" ne "");
 	$withargs{"krb5-include"} = "-I".$withargs{"krb5-dir"}."/include"
 		if $withargs{"krb5-include"} eq "" &&
 		   $withargs{"krb5-dir"} ne "";
@@ -1076,7 +1078,7 @@ else
 #		}
 	}	

-$lflags="$libs$lflags"if ($libs ne "");
+$lflags="$libs$lflags" if ($libs ne "");

 if ($no_asm)
 	{
@@ -1084,6 +1086,11 @@ if ($no_asm)
 	$sha1_obj=$md5_obj=$rmd160_obj="";
 	}

+if (!$no_shared)
+	{
+	$cast_obj="";	# CAST assembler is not PIC
+	}
+
 if ($threads)
 	{
 	$cflags=$thread_cflags;
@@ -1099,20 +1106,17 @@ if ($zlib)

 # You will find shlib_mark1 and shlib_mark2 explained in Makefile.org
 my $shared_mark = "";
-if ($shared_target ne "")
+if ($shared_target eq "")
+	{
+	$no_shared_warn = 1 if !$no_shared;
+	$no_shared = 1;
+	}
+if (!$no_shared)
 	{
 	if ($shared_cflag ne "")
 		{
 		$cflags = "$shared_cflag $cflags";
 		}
-	if (!$no_shared)
-		{
-		#$shared_mark = "\$(SHARED_LIBS)";
-		}
-	}
-else
-	{
-	$no_shared = 1;
 	}

 if ($sys_id ne "")
@@ -1286,8 +1290,6 @@ print "ARFLAGS       =$arflags\n";
 print "PERL          =$perl\n";
 print "KRB5_INCLUDES =",$withargs{"krb5-include"},"\n"
 	if $withargs{"krb5-include"} ne "";
-print "LIBKRB5       =",$withargs{"krb5-lib"},"\n"
-	if $withargs{"krb5-lib"} ne "";

 my $des_ptr=0;
 my $des_risc1=0;
@@ -1514,6 +1516,16 @@ applications as the compiler options required on this system are not known.
 See file INSTALL for details if you need multi-threading.
 EOF

+print <<\EOF if ($no_shared_warn);
+
+You gave the option 'shared'.  Normally, that would give you shared libraries.
+Unfortunately, the OpenSSL configuration doesn't include shared library support
+for this platform yet, so it will pretend you gave the option 'no-shared'.  If
+you can inform the developpers (openssl-dev\@openssl.org) how to support shared
+libraries on this platform, they will at least look at it and try their best
+(but please first make sure you have tried with a current version of OpenSSL).
+EOF
+
 exit(0);

 sub usage
--- a/92
+++ b/92
@@ -44,6 +44,8 @@ OpenSSL  -  Frequently Asked Questions
 * What is special about OpenSSL on Redhat?
 * Why does the OpenSSL compilation fail on MacOS X?
 * Why does the OpenSSL test suite fail on MacOS X?
+* Why does the OpenSSL test suite fail in BN_sqr test [on a 64-bit platform]?
+* Why does OpenBSD-i386 build fail on des-586.s with "Unimplemented segment type"?

 [PROG] Questions about programming with OpenSSL

@@ -66,7 +68,7 @@ OpenSSL  -  Frequently Asked Questions
 * Which is the current version of OpenSSL?

 The current version is available from <URL: http://www.openssl.org>.
-OpenSSL 0.9.6h was released on December 5, 2002.
+OpenSSL 0.9.7a was released on February 19, 2003.

 In addition to the current stable release, you can also access daily
 snapshots of the OpenSSL development version at <URL:
@@ -187,18 +189,30 @@ for permission to use their software with OpenSSL.

 Cryptographic software needs a source of unpredictable data to work
 correctly.  Many open source operating systems provide a "randomness
-device" that serves this purpose.  On other systems, applications have
-to call the RAND_add() or RAND_seed() function with appropriate data
-before generating keys or performing public key encryption.
-(These functions initialize the pseudo-random number generator, PRNG.)
+device" (/dev/urandom or /dev/random) that serves this purpose.
+All OpenSSL versions try to use /dev/urandom by default; starting with
+version 0.9.7, OpenSSL also tries /dev/random if /dev/urandom is not
+available.

-Some broken applications do not do this.  As of version 0.9.5, the
-OpenSSL functions that need randomness report an error if the random
-number generator has not been seeded with at least 128 bits of
-randomness.  If this error occurs, please contact the author of the
-application you are using.  It is likely that it never worked
-correctly.  OpenSSL 0.9.5 and later make the error visible by refusing
-to perform potentially insecure encryption.
+On other systems, applications have to call the RAND_add() or
+RAND_seed() function with appropriate data before generating keys or
+performing public key encryption. (These functions initialize the
+pseudo-random number generator, PRNG.)  Some broken applications do
+not do this.  As of version 0.9.5, the OpenSSL functions that need
+randomness report an error if the random number generator has not been
+seeded with at least 128 bits of randomness.  If this error occurs and
+is not discussed in the documentation of the application you are
+using, please contact the author of that application; it is likely
+that it never worked correctly.  OpenSSL 0.9.5 and later make the
+error visible by refusing to perform potentially insecure encryption.
+
+If you are using Solaris 8, you can add /dev/urandom and /dev/random
+devices by installing patch 112438 (Sparc) or 112439 (x86), which are
+available via the Patchfinder at <URL: http://sunsolve.sun.com>
+(Solaris 9 includes these devices by default). For /dev/random support
+for earlier Solaris versions, see Sun's statement at
+<URL: http://sunsolve.sun.com/pub-cgi/retrieve.pl?doc=fsrdb/27606&zone_32=SUNWski>
+(the SUNWski package is available in patch 105710).

 On systems without /dev/urandom and /dev/random, it is a good idea to
 use the Entropy Gathering Demon (EGD); see the RAND_egd() manpage for
@@ -231,18 +245,6 @@ OpenSSL command line tools. Applications using the OpenSSL library
 provide their own configuration options to specify the entropy source,
 please check out the documentation coming the with application.

-For Solaris 2.6, Tim Nibbe <tnibbe@sprint.net> and others have suggested
-installing the SUNski package from Sun patch 105710-01 (Sparc) which
-adds a /dev/random device and make sure it gets used, usually through
-$RANDFILE.  There are probably similar patches for the other Solaris
-versions.  An official statement from Sun with respect to /dev/random
-support can be found at
-  http://sunsolve.sun.com/pub-cgi/retrieve.pl?doc=fsrdb/27606&zone_32=SUNWski
-However, be warned that /dev/random is usually a blocking device, which
-may have some effects on OpenSSL.
-A third party /dev/random solution for Solaris is available at
-  http://www.cosy.sbg.ac.at/~andi/
-

 * Why do I get an "unable to write 'random state'" error message?

@@ -488,10 +490,13 @@ and then redo the compilation.  What you should really do is make sure
 Sometimes, you may get reports from VC++ command line (cl) that it
 can't find standard include files like stdio.h and other weirdnesses.
 One possible cause is that the environment isn't correctly set up.
-To solve that problem, one should run VCVARS32.BAT which is found in
-the 'bin' subdirectory of the VC++ installation directory (somewhere
-under 'Program Files').  This needs to be done prior to running NMAKE,
-and the changes are only valid for the current DOS session.
+To solve that problem for VC++ versions up to 6, one should run
+VCVARS32.BAT which is found in the 'bin' subdirectory of the VC++
+installation directory (somewhere under 'Program Files').  For VC++
+version 7 (and up?), which is also called VS.NET, the file is called
+VSVARS32.BAT instead.
+This needs to be done prior to running NMAKE, and the changes are only
+valid for the current DOS session.


 * What is special about OpenSSL on Redhat?
@@ -552,6 +557,37 @@ libraries you just built.
 Look in the file PROBLEMS for a more detailed explanation and for possible
 solutions.

+* Why does the OpenSSL test suite fail in BN_sqr test [on a 64-bit platform]?
+
+Failure in BN_sqr test is most likely caused by a failure to configure the
+toolkit for current platform or lack of support for the platform in question.
+Run './config -t' and './apps/openssl version -p'. Do these platform
+identifiers match? If they don't, then you most likely failed to run
+./config and you're hereby advised to do so before filing a bug report.
+If ./config itself fails to run, then it's most likely problem with your
+local environment and you should turn to your system administrator (or
+similar). If identifiers match (and/or no alternative identifier is
+suggested by ./config script), then the platform is unsupported. There might
+or might not be a workaround. Most notably on SPARC64 platforms with GNU
+C compiler you should be able to produce a working build by running
+'./config -m32'. I understand that -m32 might not be what you want/need,
+but the build should be operational. For further details turn to
+<openssl-dev@openssl.org>.
+
+* Why does OpenBSD-i386 build fail on des-586.s with "Unimplemented segment type"?
+
+As of 0.9.7 assembler routines were overhauled for position independence
+of the machine code, which is essential for shared library support. For
+some reason OpenBSD is equipped with an out-of-date GNU assembler which
+finds the new code offensive. To work around the problem, configure with
+no-asm (and sacrifice a great deal of performance) or patch your assembler
+according to <URL: http://www.openssl.org/~appro/gas-1.92.3.OpenBSD.patch>.
+For your convenience a pre-compiled replacement binary is provided at
+<URL: http://www.openssl.org/~appro/gas-1.92.3.static.aout.bin>.
+Reportedly elder *BSD a.out platforms also suffer from this problem and
+remedy should be same. Provided binary is statically linked and should be
+working across wider range of *BSD branches, not just OpenBSD.
+
 [PROG] ========================================================================

 * Is OpenSSL thread-safe?
--- a/30
+++ b/30
@@ -140,8 +140,8 @@
     standard headers).  If it is a problem with OpenSSL itself, please
     report the problem to <openssl-bugs@openssl.org> (note that your
     message will be recorded in the request tracker publicly readable
-     via http://www.openssl.org/rt2.html and will be forwarded to a public
-     mailing list). Include the output of "make report" in your message.
+     via http://www.openssl.org/support/rt2.html and will be forwarded to a
+     public mailing list). Include the output of "make report" in your message.
     Please check out the request tracker. Maybe the bug was already
     reported or has already been fixed.

@@ -158,11 +158,11 @@
     If a test fails, look at the output.  There may be reasons for
     the failure that isn't a problem in OpenSSL itself (like a missing
     or malfunctioning bc).  If it is a problem with OpenSSL itself,
-     try removing any compiler optimization flags from the CFLAGS line
+     try removing any compiler optimization flags from the CFLAG line
     in Makefile.ssl and run "make clean; make". Please send a bug
     report to <openssl-bugs@openssl.org>, including the output of
     "make report" in order to be added to the request tracker at
-     http://www.openssl.org/rt2.html.
+     http://www.openssl.org/support/rt2.html.

  4. If everything tests ok, install OpenSSL with

@@ -308,3 +308,25 @@
 to install additional support software to obtain random seed.
 Please check out the manual pages for RAND_add(), RAND_bytes(), RAND_egd(),
 and the FAQ for more information.
+
+ Note on support for multiple builds
+ -----------------------------------
+
+ OpenSSL is usually built in it's source tree.  Unfortunately, this doesn't
+ support building for multiple platforms from the same source tree very well.
+ It is however possible to build in a separate tree through the use of lots
+ of symbolic links, which should be prepared like this:
+
+	mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
+	cd objtree/"`uname -s`-`uname -r`-`uname -m`"
+	(cd $OPENSSL_SOURCE; find . -type f) | while read F; do
+		mkdir -p `dirname $F`
+		rm -f $F; ln -s $OPENSSL_SOURCE/$F $F
+		echo $F '->' $OPENSSL_SOURCE/$F
+	done
+	make -f Makefile.org clean
+
+ OPENSSL_SOURCE is an environment variable that contains the absolute (this
+ is important!) path to the OpenSSL source tree.
+
+ Also, operations like 'make update' should still be made in the source tree.
--- a/INSTALL.W32
+++ b/INSTALL.W32
@@ -26,12 +26,13 @@
  * Microsoft MASM (aka "ml")
  * Free Netwide Assembler NASM.

- MASM was at one point distributed with VC++. It is now distributed with some
- Microsoft DDKs, for example the Windows NT 4.0 DDK and the Windows 98 DDK. If
- you do not have either of these DDKs then you can just download the binaries
- for the Windows 98 DDK and extract and rename the two files XXXXXml.exe and
- XXXXXml.err, to ml.exe and ml.err and install somewhere on your PATH. Both
- DDKs can be downloaded from the Microsoft developers site www.msdn.com.
+ MASM is distributed with most versions of VC++. For the versions where it is
+ not included in VC++, it is also distributed with some Microsoft DDKs, for
+ example the Windows NT 4.0 DDK and the Windows 98 DDK. If you do not have
+ either of these DDKs then you can just download the binaries for the Windows
+ 98 DDK and extract and rename the two files XXXXXml.exe and XXXXXml.err, to
+ ml.exe and ml.err and install somewhere on your PATH. Both DDKs can be
+ downloaded from the Microsoft developers site www.msdn.com.

 NASM is freely available. Version 0.98 was used during testing: other versions
 may also work. It is available from many places, see for example:
--- a/Makefile.org
+++ b/Makefile.org
@@ -15,6 +15,11 @@ OPTIONS=
 CONFIGURE_ARGS=
 SHLIB_TARGET=

+# HERE indicates where this Makefile lives.  This can be used to indicate
+# where sub-Makefiles are expected to be.  Currently has very limited usage,
+# and should probably not be bothered with at all.
+HERE=.
+
 # INSTALL_PREFIX is for package builders so that they can configure
 # for, say, /usr/ and yet have everything installed to /tmp/somedir/usr/.
 # Normally it is left empty.
@@ -67,6 +72,14 @@ TAR= tar
 TARFLAGS= --no-recursion
 MAKEDEPPROG=makedepend

+# We let the C compiler driver to take care of .s files. This is done in
+# order to be excused from maintaining a separate set of architecture
+# dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC
+# gcc, then the driver will automatically translate it to -xarch=v8plus
+# and pass it down to assembler.
+AS=$(CC) -c
+ASFLAGS=$(CFLAG)
+
 # Set BN_ASM to bn_asm.o if you want to use the C version
 BN_ASM= bn_asm.o
 #BN_ASM= bn_asm.o
@@ -212,7 +225,7 @@ sub_all:
 	do \
 	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making all in $$i..." && \
-		$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' all ) || exit 1; \
+		$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' AS='${AS}' ASFLAGS='${ASFLAGS}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' all ) || exit 1; \
 	else \
 		$(MAKE) $$i; \
 	fi; \
@@ -265,39 +278,45 @@ do_bsd-gcc-shared: do_gnu-shared
 do_linux-shared: do_gnu-shared
 do_gnu-shared:
 	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+	if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+		libs="$(LIBKRB5) $$libs"; \
+	fi; \
 	( set -x; ${CC} ${SHARED_LDFLAGS} \
 		-shared -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 		-Wl,-soname=lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 		-Wl,-Bsymbolic \
 		-Wl,--whole-archive lib$$i.a \
 		-Wl,--no-whole-archive $$libs ${EX_LIBS} -lc ) || exit 1; \
-	libs="$$libs -l$$i"; \
+	libs="-l$$i $$libs"; \
 	done

-DETECT_GNU_LD=${CC} -v 2>&1 | grep '^gcc' >/dev/null 2>&1 && \
-	my_ld=`${CC} -print-prog-name=ld 2>&1` && \
-	[ -n "$$my_ld" ] && \
-	$$my_ld -v 2>&1 | grep 'GNU ld' >/dev/null 2>&1
+DETECT_GNU_LD=(${CC} -Wl,-V /dev/null 2>&1 | grep '^GNU ld' )>/dev/null

 # For Darwin AKA Mac OS/X (dyld)
 do_darwin-shared: 
 	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
-	( set -x ; ${CC} --verbose -dynamiclib -o lib$$i${SHLIB_EXT} \
+	if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+		libs="$(LIBKRB5) $$libs"; \
+	fi; \
+	( set -x; ${CC} --verbose -dynamiclib -o lib$$i${SHLIB_EXT} \
 		lib$$i.a $$libs -all_load -current_version ${SHLIB_MAJOR}.${SHLIB_MINOR} \
 		-compatibility_version ${SHLIB_MAJOR}.`echo ${SHLIB_MINOR} | cut -d. -f1` \
 		-install_name ${INSTALLTOP}/lib/lib$$i${SHLIB_EXT} ) || exit 1; \
-	libs="$$libs -l`basename $$i${SHLIB_EXT} .dylib`"; \
+	libs="-l`basename $$i${SHLIB_EXT} .dylib` $$libs"; \
 	echo "" ; \
 	done

 do_cygwin-shared:
 	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+	if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+		libs="$(LIBKRB5) $$libs"; \
+	fi; \
 	( set -x; ${CC}  -shared -o cyg$$i-$(SHLIB_VERSION_NUMBER).dll \
 		-Wl,-Bsymbolic \
 		-Wl,--whole-archive lib$$i.a \
 		-Wl,--out-implib,lib$$i.dll.a \
 		-Wl,--no-whole-archive $$libs ) || exit 1; \
-	libs="$$libs -l$$i"; \
+	libs="-l$$i $$libs"; \
 	done

 # This assumes that GNU utilities are *not* used
@@ -306,11 +325,14 @@ do_alpha-osf1-shared:
 		$(MAKE) do_gnu-shared; \
 	else \
 		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+			libs="$(LIBKRB5) $$libs"; \
+		fi; \
 		( set -x; ${CC} ${SHARED_LDFLAGS} \
 			-shared -o lib$$i.so \
 			-set_version "${SHLIB_VERSION_HISTORY}${SHLIB_VERSION_NUMBER}" \
 			-all lib$$i.a -none $$libs ${EX_LIBS} -lc ) || exit 1; \
-		libs="$$libs -l$$i"; \
+		libs="-l$$i $$libs"; \
 		done; \
 	fi

@@ -322,11 +344,14 @@ do_tru64-shared:
 		$(MAKE) do_gnu-shared; \
 	else \
 		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+			libs="$(LIBKRB5) $$libs"; \
+		fi; \
 		( set -x; ${CC} ${SHARED_LDFLAGS} \
 			-shared -msym -o lib$$i.so \
 			-set_version "${SHLIB_VERSION_HISTORY}${SHLIB_VERSION_NUMBER}" \
 			-all lib$$i.a -none $$libs ${EX_LIBS} -lc ) || exit 1; \
-		libs="$$libs -l$$i"; \
+		libs="-l$$i $$libs"; \
 		done; \
 	fi

@@ -338,12 +363,15 @@ do_tru64-shared-rpath:
 		$(MAKE) do_gnu-shared; \
 	else \
 		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+			libs="$(LIBKRB5) $$libs"; \
+		fi; \
 		( set -x; ${CC} ${SHARED_LDFLAGS} \
 			-shared -msym -o lib$$i.so \
 			-rpath  ${INSTALLTOP}/lib \
 			-set_version "${SHLIB_VERSION_HISTORY}${SHLIB_VERSION_NUMBER}" \
 			-all lib$$i.a -none $$libs ${EX_LIBS} -lc ) || exit 1; \
-		libs="$$libs -l$$i"; \
+		libs="-l$$i $$libs"; \
 		done; \
 	fi

@@ -354,12 +382,18 @@ do_solaris-shared:
 		$(MAKE) do_gnu-shared; \
 	else \
 		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+			libs="$(LIBKRB5) $$libs"; \
+		fi; \
 		( PATH=/usr/ccs/bin:$$PATH ; export PATH; \
-		  set -x; ${CC} ${SHARED_LDFLAGS} \
-			-G -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+		  MINUSZ='-z '; \
+		  (${CC} -v 2>&1 | grep gcc) > /dev/null && MINUSZ='-Wl,-z,'; \
+		  set -x; ${CC} ${SHARED_LDFLAGS} -G -dy -z text \
+			-o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			-h lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
-			-z allextract lib$$i.a $$libs ${EX_LIBS} -lc ) || exit 1; \
-		libs="$$libs -l$$i"; \
+			$${MINUSZ}allextract lib$$i.a $${MINUSZ}defaultextract \
+			$$libs ${EX_LIBS} -lc ) || exit 1; \
+		libs="-l$$i $$libs"; \
 		done; \
 	fi

@@ -369,6 +403,9 @@ do_svr3-shared:
 		$(MAKE) do_gnu-shared; \
 	else \
 		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+			libs="$(LIBKRB5) $$libs"; \
+		fi; \
 		( PATH=/usr/ccs/bin:$$PATH ; export PATH; \
 		  find . -name "*.o" -print > allobjs ; \
 		  OBJS= ; export OBJS ; \
@@ -378,7 +415,7 @@ do_svr3-shared:
 		  set -x; ${CC}  -G -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			-h lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			$${OBJS} $$libs ${EX_LIBS} ) || exit 1; \
-		libs="$$libs -l$$i"; \
+		libs="-l$$i $$libs"; \
 		done; \
 	fi

@@ -388,6 +425,9 @@ do_svr5-shared:
 		$(MAKE) do_gnu-shared; \
 	else \
 		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+			libs="$(LIBKRB5) $$libs"; \
+		fi; \
 		( PATH=/usr/ccs/bin:$$PATH ; export PATH; \
 		  find . -name "*.o" -print > allobjs ; \
 		  OBJS= ; export OBJS ; \
@@ -398,7 +438,7 @@ do_svr5-shared:
 			-G -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			-h lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			$${OBJS} $$libs ${EX_LIBS} ) || exit 1; \
-		libs="$$libs -l$$i"; \
+		libs="-l$$i $$libs"; \
 		done; \
 	fi

@@ -408,11 +448,14 @@ do_irix-shared:
 		$(MAKE) do_gnu-shared; \
 	else \
 		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+			libs="$(LIBKRB5) $$libs"; \
+		fi; \
 		( set -x; ${CC} ${SHARED_LDFLAGS} \
 			-shared -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			-Wl,-soname,lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			-all lib$$i.a $$libs ${EX_LIBS} -lc) || exit 1; \
-		libs="$$libs -l$$i"; \
+		libs="-l$$i $$libs"; \
 		done; \
 	fi

@@ -429,6 +472,9 @@ do_irix-shared:
 #
 do_hpux-shared:
 	for i in ${SHLIBDIRS}; do \
+	if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+		libs="$(LIBKRB5) $$libs"; \
+	fi; \
 	( set -x; /usr/ccs/bin/ld ${SHARED_LDFLAGS} \
 		+vnocompatwarnings \
 		-b -z +s \
@@ -449,6 +495,9 @@ do_hpux-shared:
 #
 do_hpux64-shared:
 	for i in ${SHLIBDIRS}; do \
+	if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+		libs="$(LIBKRB5) $$libs"; \
+	fi; \
 	( set -x; /usr/ccs/bin/ld ${SHARED_LDFLAGS} \
 		-b -z \
 		-o lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR} \
@@ -491,17 +540,24 @@ SHAREDFLAGS=${SHARED_LDFLAGS} -G -bE:lib$$i.exp -bM:SRE
 SHAREDCMD=$(CC)
 do_aix-shared:
 	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+	if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+		libs="$(LIBKRB5) $$libs"; \
+	fi; \
 	( set -x; \
-	  ld -r -o $$i.o $(ALLSYMSFLAG) lib$$i.a && \
+	  ld -r -o lib$$i.o $(ALLSYMSFLAG) lib$$i.a && \
 	  ( nm -Pg lib$$i.o | grep ' [BD] ' | cut -f1 -d' ' > lib$$i.exp; \
-	    $(SHAREDCMD) $(SHAREDFLAG) -o lib$$i.so lib$$i.o \
+	    $(SHAREDCMD) $(SHAREDFLAGS) \
+		-o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} lib$$i.o \
 		$$libs ${EX_LIBS} ) ) \
 	|| exit 1; \
-	libs="$$libs -l$$i"; \
+	libs="-l$$i $$libs"; \
 	done

 do_reliantunix-shared:
 	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+	if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+		libs="$(LIBKRB5) $$libs"; \
+	fi; \
 	tmpdir=/tmp/openssl.$$$$ ; rm -rf $$tmpdir ; \
 	( set -x; \
 	  ( Opwd=`pwd` ; mkdir $$tmpdir || exit 1; \
@@ -511,10 +567,10 @@ do_reliantunix-shared:
 	  cp $$tmpdir/lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} . ; \
 	) || exit 1; \
 	rm -rf $$tmpdir ; \
-	libs="$$libs -l$$i"; \
+	libs="-l$$i $$libs"; \
 	done

-openssl.pc:
+openssl.pc: Makefile.ssl
 	@ ( echo 'prefix=$(INSTALLTOP)'; \
 	    echo 'exec_prefix=$${prefix}'; \
 	    echo 'libdir=$${exec_prefix}/lib'; \
@@ -524,8 +580,8 @@ openssl.pc:
 	    echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \
 	    echo 'Version: '$(VERSION); \
 	    echo 'Requires: '; \
-	    echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
-	    echo 'Cflags: -I$${includedir}' ) > openssl.pc
+	    echo 'Libs: -L$${libdir} -lssl -lcrypto $(LIBKRB5) $(EX_LIBS)'; \
+	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > openssl.pc

 Makefile.ssl: Makefile.org
 	@echo "Makefile.ssl is older than Makefile.org."
@@ -597,8 +653,7 @@ rehash.time: certs
 	@(OPENSSL="`pwd`/apps/openssl"; OPENSSL_DEBUG_MEMORY=on; \
 		export OPENSSL OPENSSL_DEBUG_MEMORY; \
 		LD_LIBRARY_PATH="`pwd`"; DYLD_LIBRARY_PATH="`pwd`"; SHLIB_PATH="`pwd`"; LIBPATH="`pwd`"; \
-		if [ "$(PLATFORM)" == "DJGPP" ]; then PATH="`pwd`\;$$PATH";  \
-		elif [ "$(PLATFORM)" != "Cygwin" ];  then PATH="`pwd`:$$PATH"; fi; \
+		if [ "$(PLATFORM)" = "Cygwin" ]; then PATH="`pwd`:$$PATH"; fi; \
 		export LD_LIBRARY_PATH DYLD_LIBRARY_PATH SHLIB_PATH LIBPATH PATH; \
 		$(PERL) tools/c_rehash certs)
 	touch rehash.time
@@ -609,8 +664,7 @@ tests: rehash
 	@(cd test && echo "testing..." && \
 	$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' TESTS='${TESTS}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on tests );
 	@LD_LIBRARY_PATH="`pwd`"; DYLD_LIBRARY_PATH="`pwd`"; SHLIB_PATH="`pwd`"; LIBPATH="`pwd`"; \
-		if [ "$(PLATFORM)" == "DJGPP" ]; then PATH="`pwd`\;$$PATH";  \
-		elif [ "$(PLATFORM)" != "Cygwin" ];  then PATH="`pwd`:$$PATH"; fi; \
+		if [ "$(PLATFORM)" = "Cygwin" ]; then PATH="`pwd`:$$PATH"; fi; \
 		export LD_LIBRARY_PATH DYLD_LIBRARY_PATH SHLIB_PATH LIBPATH PATH; \
 		apps/openssl version -a

@@ -706,7 +760,7 @@ dist_pem_h:
 install: all install_docs
 	@$(PERL) $(TOP)/util/mkdir-p.pl $(INSTALL_PREFIX)$(INSTALLTOP)/bin \
 		$(INSTALL_PREFIX)$(INSTALLTOP)/lib \
-		$(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkginfo \
+		$(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig \
 		$(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl \
 		$(INSTALL_PREFIX)$(OPENSSLDIR)/misc \
 		$(INSTALL_PREFIX)$(OPENSSLDIR)/certs \
@@ -731,7 +785,7 @@ install: all install_docs
 			cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
 			$(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
 			chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-			mv $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i ); \
+			mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i ); \
 		fi; \
 	done;
 	@if [ -n "$(SHARED_LIBS)" ]; then \
@@ -743,15 +797,15 @@ install: all install_docs
 				if [ "$(PLATFORM)" != "Cygwin" ]; then \
 					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
 					chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-					mv $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
+					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
 				else \
-					c=`echo $$i | sed 's/^lib\(.*\)/cyg\1-$(SHLIB_VERSION_NUMBER)/'`; \
+					c=`echo $$i | sed 's/^lib\(.*\)\.dll/cyg\1-$(SHLIB_VERSION_NUMBER).dll/'`; \
 					cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
 					chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
-					mv $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
+					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
 					cp $$i.a $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new; \
 					chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new; \
-					mv $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a; \
+					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a; \
 				fi ); \
 			fi; \
 		done; \
@@ -759,8 +813,14 @@ install: all install_docs
 			cd $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \
 			set $(MAKE); \
 			$$1 -f $$here/Makefile link-shared ); \
+		if [ "$(INSTALLTOP)" != "/usr" ]; then \
+			echo 'OpenSSL shared libraries have been installed in:'; \
+			echo '  $(INSTALLTOP)'; \
+			echo ''; \
+			sed -e '1,/^$$/d' doc/openssl-shared.txt; \
+		fi; \
 	fi
-	cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkginfo
+	cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig

 install_docs:
 	@$(PERL) $(TOP)/util/mkdir-p.pl \
@@ -769,6 +829,11 @@ install_docs:
 		$(INSTALL_PREFIX)$(MANDIR)/man5 \
 		$(INSTALL_PREFIX)$(MANDIR)/man7
 	@pod2man="`cd util; ./pod2mantest $(PERL)`"; \
+	here="`pwd`"; \
+	filecase=; \
+	if [ "$(PLATFORM)" = "DJGPP" -o "$(PLATFORM)" = "Cygwin" ]; then \
+		filecase=-i; \
+	fi; \
 	for i in doc/apps/*.pod; do \
 		fn=`basename $$i .pod`; \
 		if [ "$$fn" = "config" ]; then sec=5; else sec=1; fi; \
@@ -778,10 +843,12 @@ install_docs:
 			--section=$$sec --center=OpenSSL \
 			--release=$(VERSION) `basename $$i`") \
 			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$$sec; \
-		$(PERL) util/extract-names.pl < $$i | grep -v "^$$fn" | \
-			while read n; do \
-				util/point.sh $$fn.$$sec $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$n.$$sec; \
-			done; \
+		$(PERL) util/extract-names.pl < $$i | \
+			grep -v $$filecase "^$$fn\$$" | \
+			(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
+			 while read n; do \
+				$$here/util/point.sh $$fn.$$sec $$n.$$sec; \
+			 done); \
 	done; \
 	for i in doc/crypto/*.pod doc/ssl/*.pod; do \
 		fn=`basename $$i .pod`; \
@@ -792,10 +859,12 @@ install_docs:
 			--section=$$sec --center=OpenSSL \
 			--release=$(VERSION) `basename $$i`") \
 			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$$sec; \
-		$(PERL) util/extract-names.pl < $$i | grep -v "^$$fn" | \
-			while read n; do \
-				util/point.sh $$fn.$$sec $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$n.$$sec; \
-			done; \
+		$(PERL) util/extract-names.pl < $$i | \
+			grep -v $$filecase "^$$fn\$$" | \
+			(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
+			 while read n; do \
+				$$here/util/point.sh $$fn.$$sec $$n.$$sec; \
+			 done); \
 	done

 # DO NOT DELETE THIS LINE -- make depend depends on it.
--- a/20
+++ b/20
@@ -5,6 +5,17 @@
  This file gives a brief overview of the major changes between each OpenSSL
  release. For more details please read the CHANGES file.

+  Major changes between OpenSSL 0.9.7 and OpenSSL 0.9.7a:
+
+      o Security: Important security related bugfixes.
+      o Enhanced compatibility with MIT Kerberos.
+      o Can be built without the ENGINE framework.
+      o IA32 assembler enhancements.
+      o Support for new platforms: FreeBSD/IA64 and FreeBSD/Sparc64.
+      o Configuration: the no-err option now works properly.
+      o SSL/TLS: now handles manual certificate chain building.
+      o SSL/TLS: certain session ID malfunctions corrected.
+
  Major changes between OpenSSL 0.9.6 and OpenSSL 0.9.7:

      o New library section OCSP.
@@ -18,11 +29,14 @@
      o New elliptic curve library section.
      o New AES (Rijndael) library section.
      o Support for new platforms: Windows CE, Tandem OSS, A/UX, AIX 64-bit,
-        Linux x86_64
+        Linux x86_64, Linux 64-bit on Sparc v9
      o Extended support for some platforms: VxWorks
      o Enhanced support for shared libraries.
+      o Now only builds PIC code when shared library support is requested.
      o Support for pkg-config.
      o Lots of new manuals.
+      o Makes symbolic links to or copies of manuals to cover all described
+        functions.
      o Change DES API to clean up the namespace (some applications link also
        against libdes providing similar functions having the same name).
        Provide macros for backward compatibility (will be removed in the
@@ -48,6 +62,10 @@
      o SSL/TLS: add callback to retrieve SSL/TLS messages.
      o SSL/TLS: support AES cipher suites (RFC3268).

+  Major changes between OpenSSL 0.9.6h and OpenSSL 0.9.6i:
+
+      o Important security related bugfixes.
+
  Major changes between OpenSSL 0.9.6g and OpenSSL 0.9.6h:

      o New configuration targets for Tandem OSS and A/UX.
--- a/36
+++ b/36
@@ -62,3 +62,39 @@ What happens is that gcc might optimize a little too agressively, and
 you end up with an extra incrementation when *header != '4'.

 We recommend that you upgrade gcc to as high a 3.x version as you can.
+
+* solaris64-sparcv9-cc SHA-1 performance with WorkShop 6 compiler.
+
+As subject suggests SHA-1 might perform poorly (4 times slower)
+if compiled with WorkShop 6 compiler and -xarch=v9. The cause for
+this seems to be the fact that compiler emits multiplication to
+perform shift operations:-( To work the problem around configure
+with './Configure solaris64-sparcv9-cc -DMD32_REG_T=int'.
+
+* Problems with hp-parisc2-cc target when used with "no-asm" flag
+
+When using the hp-parisc2-cc target, wrong bignum code is generated.
+This is due to the SIXTY_FOUR_BIT build being compiled with the +O3
+aggressive optimization.
+The problem manifests itself by the BN_kronecker test hanging in an
+endless loop. Reason: the BN_kronecker test calls BN_generate_prime()
+which itself hangs. The reason could be tracked down to the bn_mul_comba8()
+function in bn_asm.c. At some occasions the higher 32bit value of r[7]
+is off by 1 (meaning: calculated=shouldbe+1). Further analysis failed,
+as no debugger support possible at +O3 and additional fprintf()'s
+introduced fixed the bug, therefore it is most likely a bug in the
+optimizer.
+The bug was found in the BN_kronecker test but may also lead to
+failures in other parts of the code.
+(See Ticket #426.)
+
+Workaround: modify the target to +O2 when building with no-asm.
+
+* Poor support for AIX shared builds.
+
+do_aix-shared rule is not flexible enough to parameterize through a
+config-line. './Configure aix43-cc shared' is working, but not
+'./Configure aix64-gcc shared'. In latter case make fails to create shared
+libraries. It's possible to build 64-bit shared libraries by running
+'env OBJECT_MODE=64 make', but we need more elegant solution. Preferably one
+supporting even gcc shared builds. See RT#463 for background information.
--- a/4
+++ b/4
@@ -1,7 +1,7 @@

- OpenSSL 0.9.7-beta6-dev xx XXX 2002
+ OpenSSL 0.9.7a Feb 19 2003

- Copyright (c) 1998-2002 The OpenSSL Project
+ Copyright (c) 1998-2003 The OpenSSL Project
 Copyright (c) 1995-1998 Eric A. Young, Tim J. Hudson
 All rights reserved.

--- a/16
+++ b/16
@@ -1,15 +1,13 @@

  OpenSSL STATUS                           Last modified at
-  ______________                           $Date: 2002/12/05 22:51:17 $
+  ______________                           $Date: 2003/02/19 12:33:52 $

  DEVELOPMENT STATE

    o  OpenSSL 0.9.8:  Under development...
-    o  OpenSSL 0.9.7-beta5: Released on December  5th, 2002
-    o  OpenSSL 0.9.7-beta4: Released on November 19th, 2002
-    o  OpenSSL 0.9.7-beta3: Released on July     30th, 2002
-    o  OpenSSL 0.9.7-beta2: Released on June     16th, 2002
-    o  OpenSSL 0.9.7-beta1: Released on June      1st, 2002
+    o  OpenSSL 0.9.7a: Released on February  19th, 2003
+    o  OpenSSL 0.9.7:  Released on December  31st, 2002
+    o  OpenSSL 0.9.6i: Released on February  19th, 2003
    o  OpenSSL 0.9.6h: Released on December   5th, 2002
    o  OpenSSL 0.9.6g: Released on August     9th, 2002
    o  OpenSSL 0.9.6f: Released on August     8th, 2002
@@ -31,9 +29,6 @@

  RELEASE SHOWSTOPPERS

-    o BN_mod_mul verification fails for mips3-sgi-irix
-      unless configured with no-asm
-
    o [2002-11-21]
      PR 343 mentions that scrubbing memory with 'memset(ptr, 0, n)' may
      be optimized away in modern compilers.  This is definitely not good
@@ -67,9 +62,8 @@
 	UTIL (a new set of library functions to support some higher level
 	      functionality that is currently missing).
 	Shared library support for VMS.
-	Kerberos 5 authentication
+	Kerberos 5 authentication (Heimdal)
 	Constification
-	OCSP

  NEEDS PATCH

--- a/473
+++ b/473
@@ -32,7 +32,7 @@ $unistd       =
 $thread_cflag = 
 $sys_id       = WIN32
 $lflags       = 
-$bn_ops       = BN_LLONG DES_PTR RC4_INDEX
+$bn_ops       = BN_LLONG DES_PTR RC4_INDEX EXPORT_VAR_AS_FN
 $bn_obj       = 
 $des_obj      = 
 $bf_obj       = 
@@ -225,6 +225,56 @@ $shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
 $ranlib       = 
 $arflags      = 

+*** FreeBSD-ia64
+$cc           = gcc
+$cflags       = -DL_ENDIAN -DTERMIOS -O -fomit-frame-pointer
+$unistd       = 
+$thread_cflag = (unknown)
+$sys_id       = 
+$lflags       = 
+$bn_ops       = SIXTY_FOUR_BIT_LONG RC4_CHUNK RC4_CHAR
+$bn_obj       = asm/ia64-cpp.o
+$des_obj      = 
+$bf_obj       = 
+$md5_obj      = 
+$sha1_obj     = 
+$cast_obj     = 
+$rc4_obj      = 
+$rmd160_obj   = 
+$rc5_obj      = 
+$dso_scheme   = dlfcn
+$shared_target= bsd-gcc-shared
+$shared_cflag = -fPIC
+$shared_ldflag = 
+$shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
+$ranlib       = 
+$arflags      = 
+
+*** FreeBSD-sparc64
+$cc           = gcc
+$cflags       = -DB_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer
+$unistd       = 
+$thread_cflag = -pthread -D_REENTRANT -D_THREAD_SAFE -D_THREADSAFE
+$sys_id       = 
+$lflags       = 
+$bn_ops       = SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2 BF_PTR
+$bn_obj       = 
+$des_obj      = 
+$bf_obj       = 
+$md5_obj      = 
+$sha1_obj     = 
+$cast_obj     = 
+$rc4_obj      = 
+$rmd160_obj   = 
+$rc5_obj      = 
+$dso_scheme   = dlfcn
+$shared_target= bsd-gcc-shared
+$shared_cflag = -fPIC
+$shared_ldflag = 
+$shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
+$ranlib       = 
+$arflags      = 
+
 *** MPE/iX-gcc
 $cc           = gcc
 $cflags       = -D_ENDIAN -DBN_DIV2W -O3 -D_POSIX_SOURCE -D_SOCKET_SOURCE -I/SYSLOG/PUB
@@ -683,15 +733,15 @@ $thread_cflag = -Kthread
 $sys_id       = 
 $lflags       = -lsocket -lnsl
 $bn_ops       = BN_LLONG MD2_CHAR RC4_INDEX DES_PTR DES_RISC1 DES_UNROLL
-$bn_obj       = 
-$des_obj      = 
-$bf_obj       = 
-$md5_obj      = 
-$sha1_obj     = 
-$cast_obj     = 
-$rc4_obj      = 
-$rmd160_obj   = 
-$rc5_obj      = 
+$bn_obj       = asm/bn86-elf.o asm/co86-elf.o
+$des_obj      = asm/dx86-elf.o asm/yx86-elf.o
+$bf_obj       = asm/bx86-elf.o
+$md5_obj      = asm/mx86-elf.o
+$sha1_obj     = asm/sx86-elf.o
+$cast_obj     = asm/cx86-elf.o
+$rc4_obj      = asm/rx86-elf.o
+$rmd160_obj   = asm/rm86-elf.o
+$rc5_obj      = asm/r586-elf.o
 $dso_scheme   = dlfcn
 $shared_target= svr5-shared
 $shared_cflag = -Kpic
@@ -708,15 +758,15 @@ $thread_cflag = -pthread
 $sys_id       = 
 $lflags       = -lsocket -lnsl
 $bn_ops       = BN_LLONG MD2_CHAR RC4_INDEX DES_PTR DES_RISC1 DES_UNROLL
-$bn_obj       = 
-$des_obj      = 
-$bf_obj       = 
-$md5_obj      = 
-$sha1_obj     = 
-$cast_obj     = 
-$rc4_obj      = 
-$rmd160_obj   = 
-$rc5_obj      = 
+$bn_obj       = asm/bn86-elf.o asm/co86-elf.o
+$des_obj      = asm/dx86-elf.o asm/yx86-elf.o
+$bf_obj       = asm/bx86-elf.o
+$md5_obj      = asm/mx86-elf.o
+$sha1_obj     = asm/sx86-elf.o
+$cast_obj     = asm/cx86-elf.o
+$rc4_obj      = asm/rx86-elf.o
+$rmd160_obj   = asm/rm86-elf.o
+$rc5_obj      = asm/r586-elf.o
 $dso_scheme   = dlfcn
 $shared_target= svr5-shared
 $shared_cflag = -fPIC
@@ -725,56 +775,6 @@ $shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
 $ranlib       = 
 $arflags      = 

-*** OpenUNIX-8-pentium
-$cc           = cc
-$cflags       = -O -DFILIO_H -Kalloca -Kpentium
-$unistd       = 
-$thread_cflag = -Kthread
-$sys_id       = 
-$lflags       = -lsocket -lnsl
-$bn_ops       = BN_LLONG MD2_CHAR RC4_INDEX DES_PTR DES_RISC1 DES_UNROLL
-$bn_obj       = 
-$des_obj      = 
-$bf_obj       = 
-$md5_obj      = 
-$sha1_obj     = 
-$cast_obj     = 
-$rc4_obj      = 
-$rmd160_obj   = 
-$rc5_obj      = 
-$dso_scheme   = dlfcn
-$shared_target= svr5-shared
-$shared_cflag = -Kpic
-$shared_ldflag = 
-$shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
-$ranlib       = 
-$arflags      = 
-
-*** OpenUNIX-8-pentium_pro
-$cc           = cc
-$cflags       = -O -DFILIO_H -Kalloca -Kpentium_pro
-$unistd       = 
-$thread_cflag = -Kthread
-$sys_id       = 
-$lflags       = -lsocket -lnsl
-$bn_ops       = BN_LLONG MD2_CHAR RC4_INDEX DES_PTR DES_RISC1 DES_UNROLL
-$bn_obj       = 
-$des_obj      = 
-$bf_obj       = 
-$md5_obj      = 
-$sha1_obj     = 
-$cast_obj     = 
-$rc4_obj      = 
-$rmd160_obj   = 
-$rc5_obj      = 
-$dso_scheme   = dlfcn
-$shared_target= svr5-shared
-$shared_cflag = -Kpic
-$shared_ldflag = 
-$shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
-$ranlib       = 
-$arflags      = 
-
 *** ReliantUNIX
 $cc           = cc
 $cflags       = -KPIC -g -DTERMIOS -DB_ENDIAN
@@ -1118,10 +1118,10 @@ $rc4_obj      =
 $rmd160_obj   = 
 $rc5_obj      = 
 $dso_scheme   = dlfcn
-$shared_target= 
+$shared_target= aix-shared
 $shared_cflag = 
 $shared_ldflag = 
-$shared_extension = 
+$shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
 $ranlib       = 
 $arflags      = 

@@ -1168,10 +1168,10 @@ $rc4_obj      =
 $rmd160_obj   = 
 $rc5_obj      = 
 $dso_scheme   = dlfcn
-$shared_target= 
+$shared_target= aix-shared
 $shared_cflag = 
-$shared_ldflag = 
-$shared_extension = 
+$shared_ldflag = -q64
+$shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
 $ranlib       = 
 $arflags      = -X 64

@@ -1945,7 +1945,7 @@ $rc5_obj      =
 $dso_scheme   = dlfcn
 $shared_target= solaris-shared
 $shared_cflag = -fPIC
-$shared_ldflag = 
+$shared_ldflag = -shared
 $shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
 $ranlib       = 
 $arflags      = 
@@ -1995,7 +1995,7 @@ $rc5_obj      =
 $dso_scheme   = dlfcn
 $shared_target= solaris-shared
 $shared_cflag = -fPIC
-$shared_ldflag = 
+$shared_ldflag = -shared
 $shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
 $ranlib       = 
 $arflags      = 
@@ -2302,7 +2302,7 @@ $arflags      =

 *** hpux-ia64-cc
 $cc           = cc
-$cflags       = -Ae +DD32 +O3 +ESlit -z -DB_ENDIAN
+$cflags       = -Ae +DD32 +O3 +Olit=all -z -DB_ENDIAN
 $unistd       = 
 $thread_cflag = -D_REENTRANT
 $sys_id       = 
@@ -2352,7 +2352,7 @@ $arflags      =

 *** hpux-parisc-cc
 $cc           = cc
-$cflags       = +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY
+$cflags       = +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY
 $unistd       = 
 $thread_cflag = -D_REENTRANT
 $sys_id       = 
@@ -2427,7 +2427,7 @@ $arflags      =

 *** hpux-parisc1_1-cc
 $cc           = cc
-$cflags       = +DA1.1 +DS1.1 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY
+$cflags       = +DA1.1 +DS1.1 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY
 $unistd       = 
 $thread_cflag = -D_REENTRANT
 $sys_id       = 
@@ -2452,7 +2452,7 @@ $arflags      =

 *** hpux-parisc2-cc
 $cc           = cc
-$cflags       = +DA2.0 +DS2.0 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY
+$cflags       = +DA2.0 +DS2.0 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY
 $unistd       = 
 $thread_cflag = -D_REENTRANT
 $sys_id       = 
@@ -2577,7 +2577,7 @@ $arflags      =

 *** hpux64-ia64-cc
 $cc           = cc
-$cflags       = -Ae +DD64 +O3 +ESlit -z -DB_ENDIAN
+$cflags       = -Ae +DD64 +O3 +Olit=all -z -DB_ENDIAN
 $unistd       = 
 $thread_cflag = -D_REENTRANT
 $sys_id       = 
@@ -2652,7 +2652,7 @@ $arflags      =

 *** hpux64-parisc2-cc
 $cc           = cc
-$cflags       = +DD64 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY
+$cflags       = +DD64 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY
 $unistd       = 
 $thread_cflag = -D_REENTRANT
 $sys_id       = 
@@ -3104,10 +3104,10 @@ $arflags      =
 $cc           = gcc
 $cflags       = -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall
 $unistd       = 
-$thread_cflag = (unknown)
+$thread_cflag = -D_REENTRANT
 $sys_id       = 
-$lflags       = 
-$bn_ops       = BN_LLONG
+$lflags       = -ldl
+$bn_ops       = BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL DES_RISC2
 $bn_obj       = 
 $des_obj      = 
 $bf_obj       = 
@@ -3117,11 +3117,11 @@ $cast_obj     =
 $rc4_obj      = 
 $rmd160_obj   = 
 $rc5_obj      = 
-$dso_scheme   = 
-$shared_target= 
-$shared_cflag = 
+$dso_scheme   = dlfcn
+$shared_target= linux-shared
+$shared_cflag = -fPIC
 $shared_ldflag = 
-$shared_extension = 
+$shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
 $ranlib       = 
 $arflags      = 

@@ -3129,10 +3129,10 @@ $arflags      =
 $cc           = gcc
 $cflags       = -DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall
 $unistd       = 
-$thread_cflag = (unknown)
+$thread_cflag = -D_REENTRANT
 $sys_id       = 
-$lflags       = 
-$bn_ops       = BN_LLONG
+$lflags       = -ldl
+$bn_ops       = BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL DES_RISC2
 $bn_obj       = 
 $des_obj      = 
 $bf_obj       = 
@@ -3142,11 +3142,11 @@ $cast_obj     =
 $rc4_obj      = 
 $rmd160_obj   = 
 $rc5_obj      = 
-$dso_scheme   = 
-$shared_target= 
-$shared_cflag = 
+$dso_scheme   = dlfcn
+$shared_target= linux-shared
+$shared_cflag = -fPIC
 $shared_ldflag = 
-$shared_extension = 
+$shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
 $ranlib       = 
 $arflags      = 

@@ -3377,13 +3377,13 @@ $arflags      =

 *** linux-x86_64
 $cc           = gcc
-$cflags       = -DL_ENDIAN -DNO_ASM
+$cflags       = -m64 -DL_ENDIAN -DTERMIO -O3 -Wall -DMD32_REG_T=int
 $unistd       = 
 $thread_cflag = -D_REENTRANT
 $sys_id       = 
 $lflags       = -ldl
-$bn_ops       = SIXTY_FOUR_BIT_LONG
-$bn_obj       = 
+$bn_ops       = SIXTY_FOUR_BIT_LONG RC4_CHUNK RC4_CHAR BF_PTR2 DES_INT DES_UNROLL
+$bn_obj       = asm/x86_64-gcc.o
 $des_obj      = 
 $bf_obj       = 
 $md5_obj      = 
@@ -3395,7 +3395,32 @@ $rc5_obj      =
 $dso_scheme   = dlfcn
 $shared_target= linux-shared
 $shared_cflag = -fPIC
-$shared_ldflag = 
+$shared_ldflag = -m64
+$shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
+$ranlib       = 
+$arflags      = 
+
+*** linux64-sparcv9
+$cc           = gcc
+$cflags       = -m64 -mcpu=ultrasparc -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall
+$unistd       = 
+$thread_cflag = -D_REENTRANT
+$sys_id       = ULTRASPARC
+$lflags       = -ldl
+$bn_ops       = SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR
+$bn_obj       = 
+$des_obj      = 
+$bf_obj       = 
+$md5_obj      = asm/md5-sparcv9.o
+$sha1_obj     = 
+$cast_obj     = 
+$rc4_obj      = 
+$rmd160_obj   = 
+$rc5_obj      = 
+$dso_scheme   = dlfcn
+$shared_target= linux-shared
+$shared_cflag = -fPIC
+$shared_ldflag = -m64
 $shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
 $ranlib       = 
 $arflags      = 
@@ -3406,7 +3431,7 @@ $cflags       = -O6 -Xa -Hoff=BEHAVED -686 -Hwide -Hiw
 $unistd       = 
 $thread_cflag = (unknown)
 $sys_id       = 
-$lflags       = -lsocket -lnsl
+$lflags       = -lsocket -lnsl -lc89
 $bn_ops       = DES_PTR DES_RISC1 DES_UNROLL RC4_INDEX MD2_INT
 $bn_obj       = 
 $des_obj      = 
@@ -3631,47 +3656,22 @@ $cflags       = -belf
 $unistd       = 
 $thread_cflag = (unknown)
 $sys_id       = 
-$lflags       = -lsocket -lresolv -lnsl
+$lflags       = -lsocket -lnsl
 $bn_ops       = DES_PTR DES_RISC1 DES_UNROLL RC4_INDEX MD2_INT
-$bn_obj       = 
-$des_obj      = 
-$bf_obj       = 
-$md5_obj      = 
-$sha1_obj     = 
-$cast_obj     = 
-$rc4_obj      = 
-$rmd160_obj   = 
-$rc5_obj      = 
+$bn_obj       = asm/bn86-elf.o asm/co86-elf.o
+$des_obj      = asm/dx86-elf.o asm/yx86-elf.o
+$bf_obj       = asm/bx86-elf.o
+$md5_obj      = asm/mx86-elf.o
+$sha1_obj     = asm/sx86-elf.o
+$cast_obj     = asm/cx86-elf.o
+$rc4_obj      = asm/rx86-elf.o
+$rmd160_obj   = asm/rm86-elf.o
+$rc5_obj      = asm/r586-elf.o
 $dso_scheme   = dlfcn
 $shared_target= svr3-shared
 $shared_cflag = -Kpic
 $shared_ldflag = 
-$shared_extension = 
-$ranlib       = 
-$arflags      = 
-
-*** sco5-cc-pentium
-$cc           = cc
-$cflags       = -Kpentium
-$unistd       = 
-$thread_cflag = (unknown)
-$sys_id       = 
-$lflags       = -lsocket
-$bn_ops       = DES_PTR DES_RISC1 DES_UNROLL RC4_INDEX MD2_INT
-$bn_obj       = 
-$des_obj      = 
-$bf_obj       = 
-$md5_obj      = 
-$sha1_obj     = 
-$cast_obj     = 
-$rc4_obj      = 
-$rmd160_obj   = 
-$rc5_obj      = 
-$dso_scheme   = 
-$shared_target= 
-$shared_cflag = 
-$shared_ldflag = 
-$shared_extension = 
+$shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
 $ranlib       = 
 $arflags      = 

@@ -3681,7 +3681,7 @@ $cflags       = -O3 -fomit-frame-pointer
 $unistd       = 
 $thread_cflag = (unknown)
 $sys_id       = 
-$lflags       = -lsocket -lresolv -lnsl
+$lflags       = -lsocket -lnsl
 $bn_ops       = BN_LLONG DES_PTR DES_RISC1 DES_UNROLL RC4_INDEX MD2_INT
 $bn_obj       = asm/bn86-elf.o asm/co86-elf.o
 $des_obj      = asm/dx86-elf.o asm/yx86-elf.o
@@ -3696,7 +3696,7 @@ $dso_scheme   = dlfcn
 $shared_target= svr3-shared
 $shared_cflag = -fPIC
 $shared_ldflag = 
-$shared_extension = 
+$shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
 $ranlib       = 
 $arflags      = 

@@ -3770,7 +3770,7 @@ $rc5_obj      =
 $dso_scheme   = dlfcn
 $shared_target= solaris-shared
 $shared_cflag = -fPIC
-$shared_ldflag = 
+$shared_ldflag = -shared
 $shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
 $ranlib       = 
 $arflags      = 
@@ -3820,7 +3820,7 @@ $rc5_obj      =
 $dso_scheme   = dlfcn
 $shared_target= solaris-shared
 $shared_cflag = -fPIC
-$shared_ldflag = 
+$shared_ldflag = -shared
 $shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
 $ranlib       = 
 $arflags      = 
@@ -3870,7 +3870,7 @@ $rc5_obj      =
 $dso_scheme   = dlfcn
 $shared_target= solaris-shared
 $shared_cflag = -fPIC
-$shared_ldflag = 
+$shared_ldflag = -shared
 $shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
 $ranlib       = 
 $arflags      = 
@@ -3895,7 +3895,7 @@ $rc5_obj      =
 $dso_scheme   = dlfcn
 $shared_target= solaris-shared
 $shared_cflag = -fPIC
-$shared_ldflag = 
+$shared_ldflag = -shared
 $shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
 $ranlib       = 
 $arflags      = 
@@ -3933,19 +3933,19 @@ $thread_cflag = -D_REENTRANT
 $sys_id       = 
 $lflags       = -lsocket -lnsl -ldl
 $bn_ops       = BN_LLONG DES_PTR DES_RISC1 DES_UNROLL RC4_INDEX MD2_INT
-$bn_obj       = asm/bn86-sol.o asm/co86-sol.o
-$des_obj      = asm/dx86-sol.o asm/yx86-sol.o
-$bf_obj       = asm/bx86-sol.o
-$md5_obj      = asm/mx86-sol.o
-$sha1_obj     = asm/sx86-sol.o
-$cast_obj     = asm/cx86-sol.o
-$rc4_obj      = asm/rx86-sol.o
-$rmd160_obj   = asm/rm86-sol.o
-$rc5_obj      = asm/r586-sol.o
+$bn_obj       = asm/bn86-elf.o asm/co86-elf.o
+$des_obj      = asm/dx86-elf.o asm/yx86-elf.o
+$bf_obj       = asm/bx86-elf.o
+$md5_obj      = asm/mx86-elf.o
+$sha1_obj     = asm/sx86-elf.o
+$cast_obj     = asm/cx86-elf.o
+$rc4_obj      = asm/rx86-elf.o
+$rmd160_obj   = asm/rm86-elf.o
+$rc5_obj      = asm/r586-elf.o
 $dso_scheme   = dlfcn
 $shared_target= solaris-shared
 $shared_cflag = -fPIC
-$shared_ldflag = 
+$shared_ldflag = -shared
 $shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
 $ranlib       = 
 $arflags      = 
@@ -3995,7 +3995,7 @@ $rc5_obj      =
 $dso_scheme   = dlfcn
 $shared_target= solaris-shared
 $shared_cflag = -fPIC
-$shared_ldflag = -m64
+$shared_ldflag = -m64 -shared
 $shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
 $ranlib       = 
 $arflags      = 
@@ -4020,7 +4020,7 @@ $rc5_obj      =
 $dso_scheme   = dlfcn
 $shared_target= solaris-shared
 $shared_cflag = -fPIC
-$shared_ldflag = -m64
+$shared_ldflag = -m64 -shared
 $shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
 $ranlib       = 
 $arflags      = 
@@ -4077,7 +4077,7 @@ $arflags      =

 *** ultrix-cc
 $cc           = cc
-$cflags       = -std1 -O -Olimit 1000 -DL_ENDIAN
+$cflags       = -std1 -O -Olimit 2500 -DL_ENDIAN
 $unistd       = 
 $thread_cflag = (unknown)
 $sys_id       = 
@@ -4150,31 +4150,6 @@ $shared_extension =
 $ranlib       = 
 $arflags      = 

-*** unixware-2.0-pentium
-$cc           = cc
-$cflags       = -DFILIO_H -DNO_STRINGS_H -Kpentium
-$unistd       = 
-$thread_cflag = -Kthread
-$sys_id       = 
-$lflags       = -lsocket -lnsl -lresolv -lx
-$bn_ops       = MD2_CHAR RC4_INDEX DES_PTR DES_RISC1 DES_UNROLL
-$bn_obj       = 
-$des_obj      = 
-$bf_obj       = 
-$md5_obj      = 
-$sha1_obj     = 
-$cast_obj     = 
-$rc4_obj      = 
-$rmd160_obj   = 
-$rc5_obj      = 
-$dso_scheme   = 
-$shared_target= 
-$shared_cflag = 
-$shared_ldflag = 
-$shared_extension = 
-$ranlib       = 
-$arflags      = 
-
 *** unixware-2.1
 $cc           = cc
 $cflags       = -O -DFILIO_H
@@ -4200,56 +4175,6 @@ $shared_extension =
 $ranlib       = 
 $arflags      = 

-*** unixware-2.1-p6
-$cc           = cc
-$cflags       = -O -DFILIO_H -Kp6
-$unistd       = 
-$thread_cflag = -Kthread
-$sys_id       = 
-$lflags       = -lsocket -lnsl -lresolv -lx
-$bn_ops       = MD2_CHAR RC4_INDEX DES_PTR DES_RISC1 DES_UNROLL
-$bn_obj       = 
-$des_obj      = 
-$bf_obj       = 
-$md5_obj      = 
-$sha1_obj     = 
-$cast_obj     = 
-$rc4_obj      = 
-$rmd160_obj   = 
-$rc5_obj      = 
-$dso_scheme   = 
-$shared_target= 
-$shared_cflag = 
-$shared_ldflag = 
-$shared_extension = 
-$ranlib       = 
-$arflags      = 
-
-*** unixware-2.1-pentium
-$cc           = cc
-$cflags       = -O -DFILIO_H -Kpentium
-$unistd       = 
-$thread_cflag = -Kthread
-$sys_id       = 
-$lflags       = -lsocket -lnsl -lresolv -lx
-$bn_ops       = MD2_CHAR RC4_INDEX DES_PTR DES_RISC1 DES_UNROLL
-$bn_obj       = 
-$des_obj      = 
-$bf_obj       = 
-$md5_obj      = 
-$sha1_obj     = 
-$cast_obj     = 
-$rc4_obj      = 
-$rmd160_obj   = 
-$rc5_obj      = 
-$dso_scheme   = 
-$shared_target= 
-$shared_cflag = 
-$shared_ldflag = 
-$shared_extension = 
-$ranlib       = 
-$arflags      = 
-
 *** unixware-7
 $cc           = cc
 $cflags       = -O -DFILIO_H -Kalloca
@@ -4258,15 +4183,15 @@ $thread_cflag = -Kthread
 $sys_id       = 
 $lflags       = -lsocket -lnsl
 $bn_ops       = BN_LLONG MD2_CHAR RC4_INDEX DES_PTR DES_RISC1 DES_UNROLL
-$bn_obj       = 
-$des_obj      = 
-$bf_obj       = 
-$md5_obj      = 
-$sha1_obj     = 
-$cast_obj     = 
-$rc4_obj      = 
-$rmd160_obj   = 
-$rc5_obj      = 
+$bn_obj       = asm/bn86-elf.o asm/co86-elf.o
+$des_obj      = asm/dx86-elf.o asm/yx86-elf.o
+$bf_obj       = asm/bx86-elf.o
+$md5_obj      = asm/mx86-elf.o
+$sha1_obj     = asm/sx86-elf.o
+$cast_obj     = asm/cx86-elf.o
+$rc4_obj      = asm/rx86-elf.o
+$rmd160_obj   = asm/rm86-elf.o
+$rc5_obj      = asm/r586-elf.o
 $dso_scheme   = dlfcn
 $shared_target= svr5-shared
 $shared_cflag = -Kpic
@@ -4283,15 +4208,15 @@ $thread_cflag = -D_REENTRANT
 $sys_id       = 
 $lflags       = -lsocket -lnsl
 $bn_ops       = BN_LLONG DES_PTR DES_RISC1 DES_UNROLL RC4_INDEX MD2_INT
-$bn_obj       = 
-$des_obj      = 
-$bf_obj       = 
-$md5_obj      = 
-$sha1_obj     = 
-$cast_obj     = 
-$rc4_obj      = 
-$rmd160_obj   = 
-$rc5_obj      = 
+$bn_obj       = asm/bn86-elf.o asm/co86-elf.o
+$des_obj      = asm/dx86-elf.o asm/yx86-elf.o
+$bf_obj       = asm/bx86-elf.o
+$md5_obj      = asm/mx86-elf.o
+$sha1_obj     = asm/sx86-elf.o
+$cast_obj     = asm/cx86-elf.o
+$rc4_obj      = asm/rx86-elf.o
+$rmd160_obj   = asm/rm86-elf.o
+$rc5_obj      = asm/r586-elf.o
 $dso_scheme   = dlfcn
 $shared_target= gnu-shared
 $shared_cflag = -fPIC
@@ -4300,56 +4225,6 @@ $shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
 $ranlib       = 
 $arflags      = 

-*** unixware-7-pentium
-$cc           = cc
-$cflags       = -O -DFILIO_H -Kalloca -Kpentium
-$unistd       = 
-$thread_cflag = -Kthread
-$sys_id       = 
-$lflags       = -lsocket -lnsl
-$bn_ops       = BN_LLONG MD2_CHAR RC4_INDEX DES_PTR DES_RISC1 DES_UNROLL
-$bn_obj       = 
-$des_obj      = 
-$bf_obj       = 
-$md5_obj      = 
-$sha1_obj     = 
-$cast_obj     = 
-$rc4_obj      = 
-$rmd160_obj   = 
-$rc5_obj      = 
-$dso_scheme   = dlfcn
-$shared_target= svr5-shared
-$shared_cflag = -Kpic
-$shared_ldflag = 
-$shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
-$ranlib       = 
-$arflags      = 
-
-*** unixware-7-pentium_pro
-$cc           = cc
-$cflags       = -O -DFILIO_H -Kalloca -Kpentium_pro
-$unistd       = 
-$thread_cflag = -Kthread
-$sys_id       = 
-$lflags       = -lsocket -lnsl
-$bn_ops       = BN_LLONG MD2_CHAR RC4_INDEX DES_PTR DES_RISC1 DES_UNROLL
-$bn_obj       = 
-$des_obj      = 
-$bf_obj       = 
-$md5_obj      = 
-$sha1_obj     = 
-$cast_obj     = 
-$rc4_obj      = 
-$rmd160_obj   = 
-$rc5_obj      = 
-$dso_scheme   = dlfcn
-$shared_target= svr5-shared
-$shared_cflag = -Kpic
-$shared_ldflag = 
-$shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
-$ranlib       = 
-$arflags      = 
-
 *** vxworks-ppc405
 $cc           = ccppc
 $cflags       = -g -msoft-float -mlongcall -DCPU=PPC405 -I$(WIND_BASE)/target/h
--- a/apps/Makefile.ssl
+++ b/apps/Makefile.ssl
@@ -99,17 +99,20 @@ install:
 	@for i in $(EXE); \
 	do  \
 	(echo installing $$i; \
-	 cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i; \
-	 chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i ); \
+	 cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
+	 chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
+	 mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i ); \
 	 done;
 	@for i in $(SCRIPTS); \
 	do  \
 	(echo installing $$i; \
-	 cp $$i $(INSTALL_PREFIX)$(OPENSSLDIR)/misc/$$i; \
-	 chmod 755 $(INSTALL_PREFIX)$(OPENSSLDIR)/misc/$$i ); \
+	 cp $$i $(INSTALL_PREFIX)$(OPENSSLDIR)/misc/$$i.new; \
+	 chmod 755 $(INSTALL_PREFIX)$(OPENSSLDIR)/misc/$$i.new; \
+	 mv -f $(INSTALL_PREFIX)$(OPENSSLDIR)/misc/$$i.new $(INSTALL_PREFIX)$(OPENSSLDIR)/misc/$$i ); \
 	 done
-	@cp openssl.cnf $(INSTALL_PREFIX)$(OPENSSLDIR); \
-	chmod 644 $(INSTALL_PREFIX)$(OPENSSLDIR)/openssl.cnf
+	@cp openssl.cnf $(INSTALL_PREFIX)$(OPENSSLDIR)/openssl.cnf.new; \
+	chmod 644 $(INSTALL_PREFIX)$(OPENSSLDIR)/openssl.cnf.new; \
+	mv -f  $(INSTALL_PREFIX)$(OPENSSLDIR)/openssl.cnf.new $(INSTALL_PREFIX)$(OPENSSLDIR)/openssl.cnf

 tags:
 	ctags $(SRC)
@@ -148,8 +151,7 @@ $(PROGRAM): progs.h $(E_OBJ) $(PROGRAM).o $(DLIBCRYPTO) $(DLIBSSL)
 	fi
 	-(cd ..; OPENSSL="`pwd`/apps/openssl"; export OPENSSL; \
 		LIBPATH="`pwd`"; LD_LIBRARY_PATH="`pwd`"; DYLD_LIBRARY_PATH="`pwd`"; SHLIB_PATH="`pwd`"; \
-		if [ "$(PLATFORM)" == "DJGPP" ]; then PATH="`pwd`\;$$PATH";  \
-		elif [ "$(PLATFORM)" != "Cygwin" ];  then PATH="`pwd`:$$PATH"; fi; \
+		if [ "$(PLATFORM)" = "Cygwin" ]; then PATH="`pwd`:$$PATH"; fi; \
 		export LD_LIBRARY_PATH DYLD_LIBRARY_PATH SHLIB_PATH LIBPATH PATH; \
 		$(PERL) tools/c_rehash certs)

--- a/apps/apps.c
+++ b/apps/apps.c
@@ -122,7 +122,9 @@
 #include <openssl/pkcs12.h>
 #include <openssl/ui.h>
 #include <openssl/safestack.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
+#endif

 #ifdef OPENSSL_SYS_WINDOWS
 #define strcasecmp _stricmp
@@ -859,6 +861,7 @@ EVP_PKEY *load_key(BIO *err, const char *file, int format, int maybe_stdin,
 		BIO_printf(err,"no keyfile specified\n");
 		goto end;
 		}
+#ifndef OPENSSL_NO_ENGINE
 	if (format == FORMAT_ENGINE)
 		{
 		if (!e)
@@ -868,6 +871,7 @@ EVP_PKEY *load_key(BIO *err, const char *file, int format, int maybe_stdin,
 				ui_method, &cb_data);
 		goto end;
 		}
+#endif
 	key=BIO_new(BIO_s_file());
 	if (key == NULL)
 		{
@@ -935,6 +939,7 @@ EVP_PKEY *load_pubkey(BIO *err, const char *file, int format, int maybe_stdin,
 		BIO_printf(err,"no keyfile specified\n");
 		goto end;
 		}
+#ifndef OPENSSL_NO_ENGINE
 	if (format == FORMAT_ENGINE)
 		{
 		if (!e)
@@ -944,6 +949,7 @@ EVP_PKEY *load_pubkey(BIO *err, const char *file, int format, int maybe_stdin,
 				ui_method, &cb_data);
 		goto end;
 		}
+#endif
 	key=BIO_new(BIO_s_file());
 	if (key == NULL)
 		{
@@ -1329,6 +1335,7 @@ X509_STORE *setup_verify(BIO *bp, char *CAfile, char *CApath)
 	return NULL;
 }

+#ifndef OPENSSL_NO_ENGINE
 /* Try to load an engine in a shareable library */
 static ENGINE *try_load_engine(BIO *err, const char *engine, int debug)
 	{
@@ -1385,6 +1392,7 @@ ENGINE *setup_engine(BIO *err, const char *engine, int debug)
 		}
        return e;
        }
+#endif

 int load_config(BIO *err, CONF *cnf)
 	{
--- a/apps/apps.h
+++ b/apps/apps.h
@@ -121,7 +121,9 @@
 #include <openssl/lhash.h>
 #include <openssl/conf.h>
 #include <openssl/txt_db.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
+#endif
 #include <openssl/ossl_typ.h>

 int app_RAND_load_file(const char *file, BIO *bio_e, int dont_warn);
@@ -179,30 +181,57 @@ extern BIO *bio_err;
 		do_pipe_sig()
 #  define apps_shutdown()
 #else
-#  if defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_WIN16) || \
-   defined(OPENSSL_SYS_WIN32)
-#    ifdef _O_BINARY
-#      define apps_startup() \
-		do { _fmode=_O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
-		ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
-		ENGINE_load_builtin_engines(); setup_ui_method(); } while(0)
+#  ifndef OPENSSL_NO_ENGINE
+#    if defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_WIN16) || \
+     defined(OPENSSL_SYS_WIN32)
+#      ifdef _O_BINARY
+#        define apps_startup() \
+			do { _fmode=_O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
+			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
+			ENGINE_load_builtin_engines(); setup_ui_method(); } while(0)
+#      else
+#        define apps_startup() \
+			do { _fmode=O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
+			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
+			ENGINE_load_builtin_engines(); setup_ui_method(); } while(0)
+#      endif
 #    else
 #      define apps_startup() \
-		do { _fmode=O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
-		ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
-		ENGINE_load_builtin_engines(); setup_ui_method(); } while(0)
+			do { do_pipe_sig(); OpenSSL_add_all_algorithms(); \
+			ERR_load_crypto_strings(); ENGINE_load_builtin_engines(); \
+			setup_ui_method(); } while(0)
 #    endif
+#    define apps_shutdown() \
+			do { CONF_modules_unload(1); destroy_ui_method(); \
+			EVP_cleanup(); ENGINE_cleanup(); \
+			CRYPTO_cleanup_all_ex_data(); ERR_remove_state(0); \
+			ERR_free_strings(); } while(0)
 #  else
-#    define apps_startup() \
-		do { do_pipe_sig(); OpenSSL_add_all_algorithms(); \
-		ERR_load_crypto_strings(); ENGINE_load_builtin_engines(); \
-		setup_ui_method(); } while(0)
+#    if defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_WIN16) || \
+     defined(OPENSSL_SYS_WIN32)
+#      ifdef _O_BINARY
+#        define apps_startup() \
+			do { _fmode=_O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
+			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
+			setup_ui_method(); } while(0)
+#      else
+#        define apps_startup() \
+			do { _fmode=O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
+			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
+			setup_ui_method(); } while(0)
+#      endif
+#    else
+#      define apps_startup() \
+			do { do_pipe_sig(); OpenSSL_add_all_algorithms(); \
+			ERR_load_crypto_strings(); \
+			setup_ui_method(); } while(0)
+#    endif
+#    define apps_shutdown() \
+			do { CONF_modules_unload(1); destroy_ui_method(); \
+			EVP_cleanup(); \
+			CRYPTO_cleanup_all_ex_data(); ERR_remove_state(0); \
+			ERR_free_strings(); } while(0)
 #  endif
-#  define apps_shutdown() \
-		do { CONF_modules_unload(1); destroy_ui_method(); \
-		EVP_cleanup(); ENGINE_cleanup(); \
-		CRYPTO_cleanup_all_ex_data(); ERR_remove_state(0); \
-		ERR_free_strings(); } while(0)
 #endif

 typedef struct args_st
@@ -248,7 +277,9 @@ EVP_PKEY *load_pubkey(BIO *err, const char *file, int format, int maybe_stdin,
 STACK_OF(X509) *load_certs(BIO *err, const char *file, int format,
 	const char *pass, ENGINE *e, const char *cert_descrip);
 X509_STORE *setup_verify(BIO *bp, char *CAfile, char *CApath);
+#ifndef OPENSSL_NO_ENGINE
 ENGINE *setup_engine(BIO *err, const char *engine, int debug);
+#endif

 int load_config(BIO *err, CONF *cnf);
 char *make_config_name(void);
--- a/apps/ca.c
+++ b/apps/ca.c
@@ -196,7 +196,9 @@ static char *ca_usage[]={
 " -extensions ..  - Extension section (override value in config file)\n",
 " -extfile file   - Configuration file with X509v3 extentions to add\n",
 " -crlexts ..     - CRL extension section (override value in config file)\n",
+#ifndef OPENSSL_NO_ENGINE
 " -engine e       - use engine e, possibly a hardware device.\n",
+#endif
 " -status serial  - Shows certificate status given the serial number\n",
 " -updatedb       - Updates db for expired certificates\n",
 NULL
@@ -333,7 +335,9 @@ int MAIN(int argc, char **argv)
 #define BSIZE 256
 	MS_STATIC char buf[3][BSIZE];
 	char *randfile=NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine = NULL;
+#endif
 	char *tofree=NULL;

 #ifdef EFENCE
@@ -537,11 +541,13 @@ EF_ALIGNMENT=0;
 			rev_arg = *(++argv);
 			rev_type = REV_CA_COMPROMISE;
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else
 			{
 bad:
@@ -562,7 +568,9 @@ bad:

 	ERR_load_crypto_strings();

+#ifndef OPENSSL_NO_ENGINE
 	e = setup_engine(bio_err, engine, 0);
+#endif

 	/*****************************************************************/
 	tofree=NULL;
@@ -597,7 +605,10 @@ bad:
 		goto err;
 		}
 	if(tofree)
+		{
 		OPENSSL_free(tofree);
+		tofree = NULL;
+		}

 	if (!load_config(bio_err, conf))
 		goto err;
@@ -1021,7 +1032,7 @@ bad:
 			}

 		if (verbose)
-			BIO_printf(bio_err, "Succesfully loaded extensions file %s\n", extfile);
+			BIO_printf(bio_err, "Successfully loaded extensions file %s\n", extfile);

 		/* We can have sections in the ext file */
 		if (!extensions && !(extensions = NCONF_get_string(extconf, "default", "extensions")))
@@ -1633,11 +1644,12 @@ err:
 	BIO_free_all(out);
 	BIO_free_all(in);

-	sk_X509_pop_free(cert_sk,X509_free);
+	if (cert_sk)
+		sk_X509_pop_free(cert_sk,X509_free);

 	if (ret) ERR_print_errors(bio_err);
 	app_RAND_write_file(randfile, bio_err);
-	if (free_key)
+	if (free_key && key)
 		OPENSSL_free(key);
 	BN_free(serial);
 	TXT_DB_free(db);
--- a/apps/dgst.c
+++ b/apps/dgst.c
@@ -100,7 +100,9 @@ int MAIN(int argc, char **argv)
 	EVP_PKEY *sigkey = NULL;
 	unsigned char *sigbuf = NULL;
 	int siglen = 0;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif

 	apps_startup();

@@ -166,11 +168,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) break;
 			keyform=str2fmt(*(++argv));
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) break;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-hex") == 0)
 			out_bin = 0;
 		else if (strcmp(*argv,"-binary") == 0)
@@ -208,7 +212,9 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err,"-keyform arg    key file format (PEM or ENGINE)\n");
 		BIO_printf(bio_err,"-signature file signature to verify\n");
 		BIO_printf(bio_err,"-binary         output in binary form\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err,"-engine e       use engine e, possibly a hardware device.\n");
+#endif

 		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm (default)\n",
 			LN_md5,LN_md5);
@@ -228,7 +234,9 @@ int MAIN(int argc, char **argv)
 		goto end;
 		}

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 	in=BIO_new(BIO_s_file());
 	bmd=BIO_new(BIO_f_md());
--- a/apps/dh.c
+++ b/apps/dh.c
@@ -87,12 +87,17 @@ int MAIN(int, char **);

 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	DH *dh=NULL;
 	int i,badops=0,text=0;
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat,check=0,noout=0,C=0,ret=1;
-	char *infile,*outfile,*prog,*engine;
+	char *infile,*outfile,*prog;
+#ifndef OPENSSL_NO_ENGINE
+	char *engine;
+#endif

 	apps_startup();

@@ -103,7 +108,9 @@ int MAIN(int argc, char **argv)
 	if (!load_config(bio_err, NULL))
 		goto end;

+#ifndef OPENSSL_NO_ENGINE
 	engine=NULL;
+#endif
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -134,11 +141,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outfile= *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-check") == 0)
 			check=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -170,13 +179,17 @@ bad:
 		BIO_printf(bio_err," -text         print a text form of the DH parameters\n");
 		BIO_printf(bio_err," -C            Output C code\n");
 		BIO_printf(bio_err," -noout        no output\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
+#endif
 		goto end;
 		}

 	ERR_load_crypto_strings();

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 	in=BIO_new(BIO_s_file());
 	out=BIO_new(BIO_s_file());
--- a/apps/dhparam.c
+++ b/apps/dhparam.c
@@ -148,7 +148,9 @@ int MAIN(int, char **);

 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	DH *dh=NULL;
 	int i,badops=0,text=0;
 #ifndef OPENSSL_NO_DSA
@@ -157,7 +159,10 @@ int MAIN(int argc, char **argv)
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat,check=0,noout=0,C=0,ret=1;
 	char *infile,*outfile,*prog;
-	char *inrand=NULL,*engine=NULL;
+	char *inrand=NULL;
+#ifndef OPENSSL_NO_ENGINE
+	char *engine=NULL;
+#endif
 	int num = 0, g = 0;

 	apps_startup();
@@ -199,11 +204,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outfile= *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-check") == 0)
 			check=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -249,7 +256,9 @@ bad:
 		BIO_printf(bio_err," -2            generate parameters using  2 as the generator value\n");
 		BIO_printf(bio_err," -5            generate parameters using  5 as the generator value\n");
 		BIO_printf(bio_err," numbits       number of bits in to generate (default 512)\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
+#endif
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"               - load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"               the random number generator\n");
@@ -259,7 +268,9 @@ bad:

 	ERR_load_crypto_strings();

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 	if (g && !num)
 		num = DEFBITS;
--- a/apps/dsa.c
+++ b/apps/dsa.c
@@ -90,7 +90,9 @@ int MAIN(int, char **);

 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	int ret=1;
 	DSA *dsa=NULL;
 	int i,badops=0;
@@ -98,7 +100,10 @@ int MAIN(int argc, char **argv)
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat,text=0,noout=0;
 	int pubin = 0, pubout = 0;
-	char *infile,*outfile,*prog,*engine;
+	char *infile,*outfile,*prog;
+#ifndef OPENSSL_NO_ENGINE
+	char *engine;
+#endif
 	char *passargin = NULL, *passargout = NULL;
 	char *passin = NULL, *passout = NULL;
 	int modulus=0;
@@ -112,7 +117,9 @@ int MAIN(int argc, char **argv)
 	if (!load_config(bio_err, NULL))
 		goto end;

+#ifndef OPENSSL_NO_ENGINE
 	engine=NULL;
+#endif
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -153,11 +160,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passargout= *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-noout") == 0)
 			noout=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -189,7 +198,9 @@ bad:
 		BIO_printf(bio_err," -passin arg     input file pass phrase source\n");
 		BIO_printf(bio_err," -out arg        output file\n");
 		BIO_printf(bio_err," -passout arg    output file pass phrase source\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
+#endif
 		BIO_printf(bio_err," -des            encrypt PEM output with cbc des\n");
 		BIO_printf(bio_err," -des3           encrypt PEM output with ede cbc des using 168 bit key\n");
 #ifndef OPENSSL_NO_IDEA
@@ -207,7 +218,9 @@ bad:

 	ERR_load_crypto_strings();

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
 		BIO_printf(bio_err, "Error getting passwords\n");
--- a/apps/dsaparam.c
+++ b/apps/dsaparam.c
@@ -90,7 +90,9 @@ int MAIN(int, char **);

 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	DSA *dsa=NULL;
 	int i,badops=0,text=0;
 	BIO *in=NULL,*out=NULL;
@@ -98,7 +100,9 @@ int MAIN(int argc, char **argv)
 	char *infile,*outfile,*prog,*inrand=NULL;
 	int numbits= -1,num,genkey=0;
 	int need_rand=0;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif

 	apps_startup();

@@ -139,11 +143,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outfile= *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if(strcmp(*argv, "-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine = *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-text") == 0)
 			text=1;
 		else if (strcmp(*argv,"-C") == 0)
@@ -191,7 +197,9 @@ bad:
 		BIO_printf(bio_err," -noout        no output\n");
 		BIO_printf(bio_err," -genkey       generate a DSA key\n");
 		BIO_printf(bio_err," -rand         files to use for random number input\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
+#endif
 		BIO_printf(bio_err," number        number of bits to use for generating private key\n");
 		goto end;
 		}
@@ -235,7 +243,9 @@ bad:
 			}
 		}

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 	if (need_rand)
 		{
--- a/apps/enc.c
+++ b/apps/enc.c
@@ -100,7 +100,9 @@ int MAIN(int, char **);

 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	static const char magic[]="Salted__";
 	char mbuf[sizeof magic-1];
 	char *strbuf=NULL;
@@ -119,7 +121,9 @@ int MAIN(int argc, char **argv)
 	BIO *in=NULL,*out=NULL,*b64=NULL,*benc=NULL,*rbio=NULL,*wbio=NULL;
 #define PROG_NAME_SIZE  39
 	char pname[PROG_NAME_SIZE+1];
+#ifndef OPENSSL_NO_ENGINE
 	char *engine = NULL;
+#endif

 	apps_startup();

@@ -163,11 +167,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passarg= *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if	(strcmp(*argv,"-d") == 0)
 			enc=0;
 		else if	(strcmp(*argv,"-p") == 0)
@@ -270,7 +276,9 @@ bad:
 			BIO_printf(bio_err,"%-14s key/iv in hex is the next argument\n","-K/-iv");
 			BIO_printf(bio_err,"%-14s print the iv/key (then exit if -P)\n","-[pP]");
 			BIO_printf(bio_err,"%-14s buffer size\n","-bufsize <n>");
+#ifndef OPENSSL_NO_ENGINE
 			BIO_printf(bio_err,"%-14s use engine e, possibly a hardware device.\n","-engine e");
+#endif

 			BIO_printf(bio_err,"Cipher Types\n");
 			OBJ_NAME_do_all_sorted(OBJ_NAME_TYPE_CIPHER_METH,
@@ -284,7 +292,9 @@ bad:
 		argv++;
 		}

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 	if (bufsize != NULL)
 		{
--- a/apps/engine.c
+++ b/apps/engine.c
@@ -56,6 +56,8 @@
 *
 */

+#ifndef OPENSSL_NO_ENGINE
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -518,3 +520,4 @@ end:
 	apps_shutdown();
 	OPENSSL_EXIT(ret);
 	}
+#endif
--- a/apps/gendh.c
+++ b/apps/gendh.c
@@ -81,13 +81,17 @@ int MAIN(int, char **);

 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	DH *dh=NULL;
 	int ret=1,num=DEFBITS;
 	int g=2;
 	char *outfile=NULL;
 	char *inrand=NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
 	BIO *out=NULL;

 	apps_startup();
@@ -115,11 +119,13 @@ int MAIN(int argc, char **argv)
 			g=3; */
 		else if (strcmp(*argv,"-5") == 0)
 			g=5;
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -138,14 +144,18 @@ bad:
 		BIO_printf(bio_err," -2        - use 2 as the generator value\n");
 	/*	BIO_printf(bio_err," -3        - use 3 as the generator value\n"); */
 		BIO_printf(bio_err," -5        - use 5 as the generator value\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e - use engine e, possibly a hardware device.\n");
+#endif
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"           - load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"             the random number generator\n");
 		goto end;
 		}
 		
+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 	out=BIO_new(BIO_s_file());
 	if (out == NULL)
--- a/apps/gendsa.c
+++ b/apps/gendsa.c
@@ -77,7 +77,9 @@ int MAIN(int, char **);

 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	DSA *dsa=NULL;
 	int ret=1;
 	char *outfile=NULL;
@@ -85,7 +87,9 @@ int MAIN(int argc, char **argv)
 	char *passargout = NULL, *passout = NULL;
 	BIO *out=NULL,*in=NULL;
 	const EVP_CIPHER *enc=NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif

 	apps_startup();

@@ -111,11 +115,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passargout= *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -167,7 +173,9 @@ bad:
 		BIO_printf(bio_err," -aes128, -aes192, -aes256\n");
 		BIO_printf(bio_err,"                 encrypt PEM output with cbc aes\n");
 #endif
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e - use engine e, possibly a hardware device.\n");
+#endif
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"           - load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"             the random number generator\n");
@@ -176,7 +184,9 @@ bad:
 		goto end;
 		}

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 	if(!app_passwd(bio_err, NULL, passargout, NULL, &passout)) {
 		BIO_printf(bio_err, "Error getting password\n");
--- a/apps/genrsa.c
+++ b/apps/genrsa.c
@@ -81,7 +81,9 @@ int MAIN(int, char **);

 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	int ret=1;
 	RSA *rsa=NULL;
 	int i,num=DEFBITS;
@@ -90,7 +92,9 @@ int MAIN(int argc, char **argv)
 	unsigned long f4=RSA_F4;
 	char *outfile=NULL;
 	char *passargout = NULL, *passout = NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
 	char *inrand=NULL;
 	BIO *out=NULL;

@@ -122,11 +126,13 @@ int MAIN(int argc, char **argv)
 			f4=3;
 		else if (strcmp(*argv,"-F4") == 0 || strcmp(*argv,"-f4") == 0)
 			f4=RSA_F4;
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -177,7 +183,9 @@ bad:
 		BIO_printf(bio_err," -passout arg    output file pass phrase source\n");
 		BIO_printf(bio_err," -f4             use F4 (0x10001) for the E value\n");
 		BIO_printf(bio_err," -3              use 3 for the E value\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
+#endif
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"                 load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"                 the random number generator\n");
@@ -191,7 +199,9 @@ bad:
 		goto err;
 	}

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 	if (outfile == NULL)
 		{
--- a/apps/makeapps.com
+++ b/apps/makeapps.com
@@ -166,7 +166,7 @@ $!     TCPIP_PROGRAMS = ",S_SERVER,S_CLIENT,SESS_ID,CIPHERS,S_TIME,"
 $!
 $! Setup exceptional compilations
 $!
-$ COMPILEWITH_CC2 = ",S_SOCKET,S_SERVER,S_CLIENT,"
+$ COMPILEWITH_CC2 = ",S_SERVER,S_CLIENT,"
 $!
 $ PHASE := LIB
 $!
--- a/apps/ocsp.c
+++ b/apps/ocsp.c
@@ -55,6 +55,7 @@
 * Hudson (tjh@cryptsoft.com).
 *
 */
+#ifndef OPENSSL_NO_OCSP

 #include <stdio.h>
 #include <string.h>
@@ -722,7 +723,12 @@ int MAIN(int argc, char **argv)
 		}
 	else if (host)
 		{
+#ifndef OPENSSL_NO_SOCK
 		cbio = BIO_new_connect(host);
+#else
+		BIO_printf(bio_err, "Error creating connect BIO - sockets not supported.\n");
+		goto end;
+#endif
 		if (!cbio)
 			{
 			BIO_printf(bio_err, "Error creating connect BIO\n");
@@ -732,7 +738,16 @@ int MAIN(int argc, char **argv)
 		if (use_ssl == 1)
 			{
 			BIO *sbio;
+#if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
 			ctx = SSL_CTX_new(SSLv23_client_method());
+#elif !defined(OPENSSL_NO_SSL3)
+			ctx = SSL_CTX_new(SSLv3_client_method());
+#elif !defined(OPENSSL_NO_SSL2)
+			ctx = SSL_CTX_new(SSLv2_client_method());
+#else
+			BIO_printf(bio_err, "SSL is disabled\n");
+			goto end;
+#endif
 			SSL_CTX_set_mode(ctx, SSL_MODE_AUTO_RETRY);
 			sbio = BIO_new_ssl(ctx, 1);
 			cbio = BIO_push(sbio, cbio);
@@ -1139,7 +1154,11 @@ static BIO *init_responder(char *port)
 	bufbio = BIO_new(BIO_f_buffer());
 	if (!bufbio) 
 		goto err;
+#ifndef OPENSSL_NO_SOCK
 	acbio = BIO_new_accept(port);
+#else
+	BIO_printf(bio_err, "Error setting up accept BIO - sockets not supported.\n");
+#endif
 	if (!acbio)
 		goto err;
 	BIO_set_accept_bios(acbio, bufbio);
@@ -1226,3 +1245,4 @@ static int send_ocsp_response(BIO *cbio, OCSP_RESPONSE *resp)
 	return 1;
 	}

+#endif
--- a/apps/openssl.c
+++ b/apps/openssl.c
@@ -122,7 +122,9 @@
 #include <openssl/x509.h>
 #include <openssl/pem.h>
 #include <openssl/ssl.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
+#endif
 #define USE_SOCKETS /* needed for the _O_BINARY defs in the MS world */
 #include "progs.h"
 #include "s_apps.h"
--- a/apps/pkcs12.c
+++ b/apps/pkcs12.c
@@ -120,7 +120,9 @@ int MAIN(int argc, char **argv)
    char *passin = NULL, *passout = NULL;
    char *inrand = NULL;
    char *CApath = NULL, *CAfile = NULL;
+#ifndef OPENSSL_NO_ENGINE
    char *engine=NULL;
+#endif

    apps_startup();

@@ -252,11 +254,13 @@ int MAIN(int argc, char **argv)
 			args++;	
 			CAfile = *args;
 		    } else badarg = 1;
+#ifndef OPENSSL_NO_ENGINE
 		} else if (!strcmp(*args,"-engine")) {
 		    if (args[1]) {
 			args++;	
 			engine = *args;
 		    } else badarg = 1;
+#endif
 		} else badarg = 1;

 	} else badarg = 1;
@@ -304,14 +308,18 @@ int MAIN(int argc, char **argv)
 	BIO_printf (bio_err, "-password p   set import/export password source\n");
 	BIO_printf (bio_err, "-passin p     input file pass phrase source\n");
 	BIO_printf (bio_err, "-passout p    output file pass phrase source\n");
+#ifndef OPENSSL_NO_ENGINE
 	BIO_printf (bio_err, "-engine e     use engine e, possibly a hardware device.\n");
+#endif
 	BIO_printf(bio_err,  "-rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 	BIO_printf(bio_err,  "              load the file (or the files in the directory) into\n");
 	BIO_printf(bio_err,  "              the random number generator\n");
    	goto end;
    }

+#ifndef OPENSSL_NO_ENGINE
    e = setup_engine(bio_err, engine, 0);
+#endif

    if(passarg) {
 	if(export_cert) passargout = passarg;
--- a/apps/pkcs7.c
+++ b/apps/pkcs7.c
@@ -82,7 +82,9 @@ int MAIN(int, char **);

 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	PKCS7 *p7=NULL;
 	int i,badops=0;
 	BIO *in=NULL,*out=NULL;
@@ -90,7 +92,9 @@ int MAIN(int argc, char **argv)
 	char *infile,*outfile,*prog;
 	int print_certs=0,text=0,noout=0;
 	int ret=1;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif

 	apps_startup();

@@ -134,11 +138,13 @@ int MAIN(int argc, char **argv)
 			text=1;
 		else if (strcmp(*argv,"-print_certs") == 0)
 			print_certs=1;
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else
 			{
 			BIO_printf(bio_err,"unknown option %s\n",*argv);
@@ -161,14 +167,18 @@ bad:
 		BIO_printf(bio_err," -print_certs  print any certs or crl in the input\n");
 		BIO_printf(bio_err," -text         print full details of certificates\n");
 		BIO_printf(bio_err," -noout        don't output encoded data\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
+#endif
 		ret = 1;
 		goto end;
 		}

 	ERR_load_crypto_strings();

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 	in=BIO_new(BIO_s_file());
 	out=BIO_new(BIO_s_file());
--- a/apps/pkcs8.c
+++ b/apps/pkcs8.c
@@ -85,7 +85,9 @@ int MAIN(int argc, char **argv)
 	EVP_PKEY *pkey=NULL;
 	char pass[50], *passin = NULL, *passout = NULL, *p8pass = NULL;
 	int badarg = 0;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif

 	if (bio_err == NULL) bio_err = BIO_new_fp (stderr, BIO_NOCLOSE);

@@ -145,11 +147,13 @@ int MAIN(int argc, char **argv)
 			if (!args[1]) goto bad;
 			passargout= *(++args);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*args,"-engine") == 0)
 			{
 			if (!args[1]) goto bad;
 			engine= *(++args);
 			}
+#endif
 		else if (!strcmp (*args, "-in")) {
 			if (args[1]) {
 				args++;
@@ -182,11 +186,15 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err, "-nocrypt        use or expect unencrypted private key\n");
 		BIO_printf(bio_err, "-v2 alg         use PKCS#5 v2.0 and cipher \"alg\"\n");
 		BIO_printf(bio_err, "-v1 obj         use PKCS#5 v1.5 and cipher \"alg\"\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
+#endif
 		return (1);
 	}

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
 		BIO_printf(bio_err, "Error getting passwords\n");
--- a/apps/progs.h
+++ b/apps/progs.h
@@ -35,7 +35,9 @@ extern int pkcs8_main(int argc,char *argv[]);
 extern int spkac_main(int argc,char *argv[]);
 extern int smime_main(int argc,char *argv[]);
 extern int rand_main(int argc,char *argv[]);
+#ifndef OPENSSL_NO_ENGINE
 extern int engine_main(int argc,char *argv[]);
+#endif
 extern int ocsp_main(int argc,char *argv[]);

 #define FUNC_TYPE_GENERAL	1
@@ -92,7 +94,9 @@ FUNCTION functions[] = {
 #if !defined(OPENSSL_NO_SOCK) && !(defined(OPENSSL_NO_SSL2) && defined(OPENSSL_NO_SSL3))
 	{FUNC_TYPE_GENERAL,"s_client",s_client_main},
 #endif
+#ifndef OPENSSL_NO_SPEED
 	{FUNC_TYPE_GENERAL,"speed",speed_main},
+#endif
 #if !defined(OPENSSL_NO_SOCK) && !(defined(OPENSSL_NO_SSL2) && defined(OPENSSL_NO_SSL3))
 	{FUNC_TYPE_GENERAL,"s_time",s_time_main},
 #endif
@@ -111,7 +115,9 @@ FUNCTION functions[] = {
 	{FUNC_TYPE_GENERAL,"spkac",spkac_main},
 	{FUNC_TYPE_GENERAL,"smime",smime_main},
 	{FUNC_TYPE_GENERAL,"rand",rand_main},
+#ifndef OPENSSL_NO_ENGINE
 	{FUNC_TYPE_GENERAL,"engine",engine_main},
+#endif
 	{FUNC_TYPE_GENERAL,"ocsp",ocsp_main},
 #ifndef OPENSSL_NO_MD2
 	{FUNC_TYPE_MD,"md2",dgst_main},
--- a/apps/rand.c
+++ b/apps/rand.c
@@ -76,7 +76,9 @@ int MAIN(int, char **);

 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	int i, r, ret = 1;
 	int badopt;
 	char *outfile = NULL;
@@ -84,7 +86,9 @@ int MAIN(int argc, char **argv)
 	int base64 = 0;
 	BIO *out = NULL;
 	int num = -1;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif

 	apps_startup();

@@ -106,6 +110,7 @@ int MAIN(int argc, char **argv)
 			else
 				badopt = 1;
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(argv[i], "-engine") == 0)
 			{
 			if ((argv[i+1] != NULL) && (engine == NULL))
@@ -113,6 +118,7 @@ int MAIN(int argc, char **argv)
 			else
 				badopt = 1;
 			}
+#endif
 		else if (strcmp(argv[i], "-rand") == 0)
 			{
 			if ((argv[i+1] != NULL) && (inrand == NULL))
@@ -150,13 +156,17 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err, "Usage: rand [options] num\n");
 		BIO_printf(bio_err, "where options are\n");
 		BIO_printf(bio_err, "-out file             - write to file\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err, "-engine e             - use engine e, possibly a hardware device.\n");
+#endif
 		BIO_printf(bio_err, "-rand file%cfile%c... - seed PRNG from files\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err, "-base64               - encode output\n");
 		goto err;
 		}

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 	app_RAND_load_file(NULL, bio_err, (inrand != NULL));
 	if (inrand != NULL)
--- a/apps/req.c
+++ b/apps/req.c
@@ -135,7 +135,6 @@ static int req_check_len(int len,int n_min,int n_max);
 static int check_end(char *str, char *end);
 #ifndef MONOLITH
 static char *default_config_file=NULL;
-static CONF *config=NULL;
 #endif
 static CONF *req_conf=NULL;
 static int batch=0;
@@ -163,7 +162,9 @@ int MAIN(int argc, char **argv)
 	int informat,outformat,verify=0,noout=0,text=0,keyform=FORMAT_PEM;
 	int nodes=0,kludge=0,newhdr=0,subject=0,pubkey=0;
 	char *infile,*outfile,*prog,*keyfile=NULL,*template=NULL,*keyout=NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
 	char *extensions = NULL;
 	char *req_exts = NULL;
 	const EVP_CIPHER *cipher=NULL;
@@ -211,11 +212,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outformat=str2fmt(*(++argv));
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-key") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -429,7 +432,9 @@ bad:
 		BIO_printf(bio_err," -verify        verify signature on REQ\n");
 		BIO_printf(bio_err," -modulus       RSA modulus\n");
 		BIO_printf(bio_err," -nodes         don't encrypt the output key\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e      use engine e, possibly a hardware device\n");
+#endif
 		BIO_printf(bio_err," -subject       output the request's subject\n");
 		BIO_printf(bio_err," -passin        private key password source\n");
 		BIO_printf(bio_err," -key file      use the private key contained in file\n");
@@ -454,7 +459,7 @@ bad:
 		BIO_printf(bio_err," -extensions .. specify certificate extension section (override value in config file)\n");
 		BIO_printf(bio_err," -reqexts ..    specify request extension section (override value in config file)\n");
 		BIO_printf(bio_err," -utf8          input characters are UTF8 (default ASCII)\n");
-		BIO_printf(bio_err," -nameopt arg   - various certificate name options\n");
+		BIO_printf(bio_err," -nameopt arg    - various certificate name options\n");
 		BIO_printf(bio_err," -reqopt arg    - various request text options\n\n");
 		goto end;
 		}
@@ -618,7 +623,9 @@ bad:
 	if ((in == NULL) || (out == NULL))
 		goto end;

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 	if (keyfile != NULL)
 		{
@@ -1238,11 +1245,17 @@ start:		for (;;)

 			sprintf(buf,"%s_min",v->name);
 			if (!NCONF_get_number(req_conf,dn_sect,buf, &n_min))
+				{
+				ERR_clear_error();
 				n_min = -1;
+				}

 			sprintf(buf,"%s_max",v->name);
 			if (!NCONF_get_number(req_conf,dn_sect,buf, &n_max))
+				{
+				ERR_clear_error();
 				n_max = -1;
+				}

 			if (!add_DN_object(subj,v->value,def,value,nid,
 				n_min,n_max, chtype))
--- a/apps/rsa.c
+++ b/apps/rsa.c
@@ -104,7 +104,9 @@ int MAIN(int argc, char **argv)
 	char *infile,*outfile,*prog;
 	char *passargin = NULL, *passargout = NULL;
 	char *passin = NULL, *passout = NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
 	int modulus=0;

 	apps_startup();
@@ -156,11 +158,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passargout= *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-sgckey") == 0)
 			sgckey=1;
 		else if (strcmp(*argv,"-pubin") == 0)
@@ -212,13 +216,17 @@ bad:
 		BIO_printf(bio_err," -check          verify key consistency\n");
 		BIO_printf(bio_err," -pubin          expect a public key in input file\n");
 		BIO_printf(bio_err," -pubout         output a public key\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
+#endif
 		goto end;
 		}

 	ERR_load_crypto_strings();

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
 		BIO_printf(bio_err, "Error getting passwords\n");
--- a/apps/rsautl.c
+++ b/apps/rsautl.c
@@ -85,7 +85,9 @@ int MAIN(int argc, char **argv)
 	ENGINE *e = NULL;
 	BIO *in = NULL, *out = NULL;
 	char *infile = NULL, *outfile = NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine = NULL;
+#endif
 	char *keyfile = NULL;
 	char rsa_mode = RSA_VERIFY, key_type = KEY_PRIVKEY;
 	int keyform = FORMAT_PEM;
@@ -125,9 +127,11 @@ int MAIN(int argc, char **argv)
 		} else if (strcmp(*argv,"-keyform") == 0) {
 			if (--argc < 1) badarg = 1;
 			keyform=str2fmt(*(++argv));
+#ifndef OPENSSL_NO_ENGINE
 		} else if(!strcmp(*argv, "-engine")) {
 			if (--argc < 1) badarg = 1;
 			engine = *(++argv);
+#endif
 		} else if(!strcmp(*argv, "-pubin")) {
 			key_type = KEY_PUBKEY;
 		} else if(!strcmp(*argv, "-certin")) {
@@ -162,7 +166,9 @@ int MAIN(int argc, char **argv)
 		goto end;
 	}

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 /* FIXME: seed PRNG only if needed */
 	app_RAND_load_file(NULL, bio_err, 0);
@@ -305,7 +311,9 @@ static void usage()
 	BIO_printf(bio_err, "-encrypt        encrypt with public key\n");
 	BIO_printf(bio_err, "-decrypt        decrypt with private key\n");
 	BIO_printf(bio_err, "-hexdump        hex dump output\n");
+#ifndef OPENSSL_NO_ENGINE
 	BIO_printf(bio_err, "-engine e       use engine e, possibly a hardware device.\n");
+#endif

 }

--- a/apps/s_client.c
+++ b/apps/s_client.c
@@ -222,7 +222,9 @@ static void sc_usage(void)
 	BIO_printf(bio_err,"                 for those protocols that support it, where\n");
 	BIO_printf(bio_err,"                 'prot' defines which one to assume.  Currently,\n");
 	BIO_printf(bio_err,"                 only \"smtp\" is supported.\n");
+#ifndef OPENSSL_NO_ENGINE
 	BIO_printf(bio_err," -engine id    - Initialise and use the specified engine\n");
+#endif
 	BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);

 	}
@@ -254,8 +256,10 @@ int MAIN(int argc, char **argv)
 	SSL_METHOD *meth=NULL;
 	BIO *sbio;
 	char *inrand=NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine_id=NULL;
 	ENGINE *e=NULL;
+#endif
 #ifdef OPENSSL_SYS_WINDOWS
 	struct timeval tv;
 #endif
@@ -415,11 +419,13 @@ int MAIN(int argc, char **argv)
 			else
 				goto bad;
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if	(strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine_id = *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -444,7 +450,9 @@ bad:
 	OpenSSL_add_ssl_algorithms();
 	SSL_load_error_strings();

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine_id, 1);
+#endif

 	if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL
 		&& !RAND_status())
--- a/apps/s_server.c
+++ b/apps/s_server.c
@@ -242,7 +242,9 @@ static int s_msg=0;
 static int s_quiet=0;

 static int hack=0;
+#ifndef OPENSSL_NO_ENGINE
 static char *engine_id=NULL;
+#endif
 static const char *session_id_prefix=NULL;

 #ifdef MONOLITH
@@ -267,7 +269,9 @@ static void s_server_init(void)
 	s_msg=0;
 	s_quiet=0;
 	hack=0;
+#ifndef OPENSSL_NO_ENGINE
 	engine_id=NULL;
+#endif
 	}
 #endif

@@ -316,7 +320,9 @@ static void sv_usage(void)
 	BIO_printf(bio_err," -WWW          - Respond to a 'GET /<path> HTTP/1.0' with file ./<path>\n");
 	BIO_printf(bio_err," -HTTP         - Respond to a 'GET /<path> HTTP/1.0' with file ./<path>\n");
        BIO_printf(bio_err,"                 with the assumption it contains a complete HTTP response.\n");
+#ifndef OPENSSL_NO_ENGINE
 	BIO_printf(bio_err," -engine id    - Initialise and use the specified engine\n");
+#endif
 	BIO_printf(bio_err," -id_prefix arg - Generate SSL/TLS session IDs prefixed by 'arg'\n");
 	BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 	}
@@ -490,7 +496,9 @@ int MAIN(int argc, char *argv[])
 	int no_tmp_rsa=0,no_dhe=0,nocert=0;
 	int state=0;
 	SSL_METHOD *meth=NULL;
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e=NULL;
+#endif
 	char *inrand=NULL;

 #if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
@@ -665,11 +673,13 @@ int MAIN(int argc, char *argv[])
 			if (--argc < 1) goto bad;
 			session_id_prefix = *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine_id= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -694,7 +704,9 @@ bad:
 	SSL_load_error_strings();
 	OpenSSL_add_ssl_algorithms();

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine_id, 1);
+#endif

 	if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL
 		&& !RAND_status())
--- a/apps/smime.c
+++ b/apps/smime.c
@@ -104,7 +104,9 @@ int MAIN(int argc, char **argv)
 	int need_rand = 0;
 	int informat = FORMAT_SMIME, outformat = FORMAT_SMIME;
        int keyform = FORMAT_PEM;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif

 	args = argv + 1;
 	ret = 1;
@@ -176,11 +178,13 @@ int MAIN(int argc, char **argv)
 				inrand = *args;
 			} else badarg = 1;
 			need_rand = 1;
+#ifndef OPENSSL_NO_ENGINE
 		} else if (!strcmp(*args,"-engine")) {
 			if (args[1]) {
 				args++;
 				engine = *args;
 			} else badarg = 1;
+#endif
 		} else if (!strcmp(*args,"-passin")) {
 			if (args[1]) {
 				args++;
@@ -330,7 +334,9 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-CAfile file   trusted certificates file\n");
 		BIO_printf (bio_err, "-crl_check     check revocation status of signer's certificate using CRLs\n");
 		BIO_printf (bio_err, "-crl_check_all check revocation status of signer's certificate chain using CRLs\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf (bio_err, "-engine e      use engine e, possibly a hardware device.\n");
+#endif
 		BIO_printf (bio_err, "-passin arg    input file pass phrase source\n");
 		BIO_printf(bio_err,  "-rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,  "               load the file (or the files in the directory) into\n");
@@ -339,7 +345,9 @@ int MAIN(int argc, char **argv)
 		goto end;
 	}

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 	if(!app_passwd(bio_err, passargin, NULL, &passin, NULL)) {
 		BIO_printf(bio_err, "Error getting password\n");
--- a/apps/speed.c
+++ b/apps/speed.c
@@ -58,6 +58,8 @@

 /* most of this code has been pilfered from my libdes speed.c program */

+#ifndef OPENSSL_NO_SPEED
+
 #undef SECONDS
 #define SECONDS		3	
 #define RSA_SECONDS	10
@@ -370,7 +372,9 @@ int MAIN(int, char **);

 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	unsigned char *buf=NULL,*buf2=NULL;
 	int mret=1;
 	long count=0,save_count=0;
@@ -590,6 +594,7 @@ int MAIN(int argc, char **argv)
 			j--;	/* Otherwise, -elapsed gets confused with
 				   an algorithm. */
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if	((argc > 0) && (strcmp(*argv,"-engine") == 0))
 			{
 			argc--;
@@ -606,6 +611,7 @@ int MAIN(int argc, char **argv)
 			   means all of them should be run) */
 			j--;
 			}
+#endif
 #ifdef HAVE_FORK
 		else if	((argc > 0) && (strcmp(*argv,"-multi") == 0))
 			{
@@ -865,7 +871,9 @@ int MAIN(int argc, char **argv)
 #if defined(TIMES) || defined(USE_TOD)
 			BIO_printf(bio_err,"-elapsed        measure time in real time instead of CPU user time.\n");
 #endif
+#ifndef OPENSSL_NO_ENGINE
 			BIO_printf(bio_err,"-engine e       use engine e, possibly a hardware device.\n");
+#endif
 			BIO_printf(bio_err,"-evp e          use EVP e.\n");
 			BIO_printf(bio_err,"-decrypt        time decryption instead of encryption (only EVP).\n");
 			BIO_printf(bio_err,"-mr             produce machine readable output.\n");
@@ -1393,6 +1401,7 @@ int MAIN(int argc, char **argv)
 				else
 					EVP_EncryptFinal_ex(&ctx,buf,&outl);
 				d=Time_F(STOP);
+				EVP_CIPHER_CTX_cleanup(&ctx);
 				}
 			if (evp_md)
 				{
@@ -1939,3 +1948,4 @@ static int do_multi(int multi)
 	return 1;
 	}
 #endif
+#endif
--- a/apps/spkac.c
+++ b/apps/spkac.c
@@ -92,7 +92,9 @@ int MAIN(int argc, char **argv)
 	CONF *conf = NULL;
 	NETSCAPE_SPKI *spki = NULL;
 	EVP_PKEY *pkey = NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif

 	apps_startup();

@@ -141,11 +143,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			spksect= *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-noout") == 0)
 			noout=1;
 		else if (strcmp(*argv,"-pubkey") == 0)
@@ -171,7 +175,9 @@ bad:
 		BIO_printf(bio_err," -noout         don't print SPKAC\n");
 		BIO_printf(bio_err," -pubkey        output public key\n");
 		BIO_printf(bio_err," -verify        verify SPKAC signature\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e      use engine e, possibly a hardware device.\n");
+#endif
 		goto end;
 		}

@@ -181,7 +187,9 @@ bad:
 		goto end;
 	}

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 	if(keyfile) {
 		pkey = load_key(bio_err,
--- a/apps/verify.c
+++ b/apps/verify.c
@@ -86,7 +86,9 @@ int MAIN(int argc, char **argv)
 	STACK_OF(X509) *untrusted = NULL, *trusted = NULL;
 	X509_STORE *cert_ctx=NULL;
 	X509_LOOKUP *lookup=NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif

 	cert_ctx=X509_STORE_new();
 	if (cert_ctx == NULL) goto end;
@@ -142,11 +144,13 @@ int MAIN(int argc, char **argv)
 				if (argc-- < 1) goto end;
 				trustfile= *(++argv);
 				}
+#ifndef OPENSSL_NO_ENGINE
 			else if (strcmp(*argv,"-engine") == 0)
 				{
 				if (--argc < 1) goto end;
 				engine= *(++argv);
 				}
+#endif
 			else if (strcmp(*argv,"-help") == 0)
 				goto end;
 			else if (strcmp(*argv,"-ignore_critical") == 0)
@@ -170,7 +174,9 @@ int MAIN(int argc, char **argv)
 			break;
 		}

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 	lookup=X509_STORE_add_lookup(cert_ctx,X509_LOOKUP_file());
 	if (lookup == NULL) abort();
@@ -219,7 +225,11 @@ int MAIN(int argc, char **argv)
 	ret=0;
 end:
 	if (ret == 1) {
-		BIO_printf(bio_err,"usage: verify [-verbose] [-CApath path] [-CAfile file] [-purpose purpose] [-crl_check] [-engine e] cert1 cert2 ...\n");
+		BIO_printf(bio_err,"usage: verify [-verbose] [-CApath path] [-CAfile file] [-purpose purpose] [-crl_check]");
+#ifndef OPENSSL_NO_ENGINE
+		BIO_printf(bio_err," [-engine e]");
+#endif
+		BIO_printf(bio_err," cert1 cert2 ...\n");
 		BIO_printf(bio_err,"recognized usages:\n");
 		for(i = 0; i < X509_PURPOSE_get_count(); i++) {
 			X509_PURPOSE *ptmp;
--- a/apps/x509.c
+++ b/apps/x509.c
@@ -131,7 +131,9 @@ static char *x509_usage[]={
 " -extensions     - section from config file with X509V3 extensions to add\n",
 " -clrext         - delete extensions before signing and input certificate\n",
 " -nameopt arg    - various certificate name options\n",
+#ifndef OPENSSL_NO_ENGINE
 " -engine e       - use engine e, possibly a hardware device.\n",
+#endif
 " -certopt arg    - various certificate text options\n",
 NULL
 };
@@ -183,7 +185,9 @@ int MAIN(int argc, char **argv)
 	int need_rand = 0;
 	int checkend=0,checkoffset=0;
 	unsigned long nmflag = 0, certflag = 0;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif

 	reqfile=0;

@@ -360,11 +364,13 @@ int MAIN(int argc, char **argv)
 			alias= *(++argv);
 			trustout = 1;
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-C") == 0)
 			C= ++num;
 		else if (strcmp(*argv,"-email") == 0)
@@ -450,7 +456,9 @@ bad:
 		goto end;
 		}

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 	if (need_rand)
 		app_RAND_load_file(NULL, bio_err, 0);
--- a/73
+++ b/73
@@ -74,34 +74,27 @@ if [ "x$XREL" != "x" ]; then
 		echo "whatever-whatever-sco5"; exit 0
 		;;
 	    4.2MP)
-		if [ "x$VERSION" = "x2.01" ]; then
-		    echo "${MACHINE}-whatever-unixware201"; exit 0
-		elif [ "x$VERSION" = "x2.02" ]; then
-		    echo "${MACHINE}-whatever-unixware202"; exit 0
-		elif [ "x$VERSION" = "x2.03" ]; then
-		    echo "${MACHINE}-whatever-unixware203"; exit 0
-		elif [ "x$VERSION" = "x2.1.1" ]; then
-		    echo "${MACHINE}-whatever-unixware211"; exit 0
-		elif [ "x$VERSION" = "x2.1.2" ]; then
-		    echo "${MACHINE}-whatever-unixware212"; exit 0
-		elif [ "x$VERSION" = "x2.1.3" ]; then
-		    echo "${MACHINE}-whatever-unixware213"; exit 0
-		else
-		    echo "${MACHINE}-whatever-unixware2"; exit 0
-		fi
+		case "x${VERSION}" in
+		    x2.0*) echo "whatever-whatever-unixware20"; exit 0 ;;
+		    x2.1*) echo "whatever-whatever-unixware21"; exit 0 ;;
+		    x2*)   echo "whatever-whatever-unixware2";  exit 0 ;;
+		esac
 		;;
 	    4.2)
-		echo "whatever-whatever-unixware1"; exit 0
-		;;
-	    OpenUNIX)
-		if [ "`echo x$VERSION | sed -e 's/\..*//'`" = "x8" ]; then
-		    echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0
-		fi
+		echo "i386-whatever-unixware1"; exit 0
 		;;
 	    5)
-		if [ "`echo x$VERSION | sed -e 's/\..*//'`" = "x7" ]; then
-		    echo "${MACHINE}-sco-unixware7"; exit 0
-		fi
+		case "x${VERSION}" in
+		    # We hardcode i586 in place of ${MACHINE} for the
+		    # following reason. The catch is that even though Pentium
+		    # is minimum requirement for platforms in question,
+		    # ${MACHINE} gets always assigned to i386. Now, problem
+		    # with i386 is that it makes ./config pass 386 to
+		    # ./Configure, which in turn makes make generate
+		    # inefficient SHA-1 (for this moment) code.
+		    x7*)  echo "i586-sco-unixware7";           exit 0 ;;
+		    x8*)  echo "i586-unkn-OpenUNIX${VERSION}"; exit 0 ;;
+		esac
 		;;
 	esac
    fi
@@ -196,7 +189,7 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
 	echo "${MACHINE}-whatever-bsdi"; exit 0
 	;;

-    FreeBSD:*)
+    FreeBSD:*:*:*386*)
        VERS=`echo ${RELEASE} | sed -e 's/[-(].*//'`
        MACH=`sysctl -n hw.model`
        ARCH='whatever'
@@ -205,7 +198,6 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
           *486*       ) MACH="i486"     ;;
           Pentium\ II*) MACH="i686"     ;;
           Pentium*    ) MACH="i586"     ;;
-           Alpha*      ) MACH="alpha"    ;;
           *           ) MACH="$MACHINE" ;;
        esac
        case ${MACH} in
@@ -214,6 +206,10 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
        echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0
        ;;

+    FreeBSD:*)
+	echo "${MACHINE}-whatever-freebsd"; exit 0
+	;;
+
    NetBSD:*:*:*386*)
        echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0
 	;;
@@ -461,6 +457,10 @@ if [ "${SYSTEM}-${MACHINE}" = "Linux-alpha" ]; then
  fi
 fi

+if [ "${SYSTEM}" = "AIX" ]; then	# favor vendor cc over gcc
+    (cc) 2>&1 | grep -iv "command not found" > /dev/null && CC=cc
+fi
+
 CCVER=${CCVER:-0}

 # read the output of the embedded GuessOS 
@@ -547,12 +547,13 @@ EOF
  ppc-apple-darwin*) OUT="darwin-ppc-cc" ;;
  i386-apple-darwin*) OUT="darwin-i386-cc" ;;
  sparc64-*-linux2)
-	#Before we can uncomment following lines we have to wait at least
-	#till 64-bit glibc for SPARC is operational:-(
-	#echo "WARNING! If you wish to build 64-bit library, then you have to"
-	#echo "         invoke './Configure linux64-sparcv9' *manually*."
-	#echo "         Type return if you want to continue, Ctrl-C to abort."
-	#read waste < /dev/tty
+	echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI"
+	echo "         and wish to build 64-bit library, then you have to"
+	echo "         invoke './Configure linux64-sparcv9' *manually*."
+	if [ "$TEST" = "false" ]; then
+	  echo "          You have about 5 seconds to press Ctrl-C to abort."
+	  (stty -icanon min 0 time 50; read waste) < /dev/tty
+	fi
 	OUT="linux-sparcv9" ;;
  sparc-*-linux2)
 	KARCH=`awk '/^type/{print$3}' /proc/cpuinfo`
@@ -639,6 +640,8 @@ EOF
  *86*-*-solaris2) OUT="solaris-x86-$CC" ;;
  *-*-sunos4) OUT="sunos-$CC" ;;
  alpha*-*-freebsd*) OUT="FreeBSD-alpha" ;;
+  sparc64-*-freebsd*) OUT="FreeBSD-sparc64" ;;
+  ia64-*-freebsd*) OUT="FreeBSD-ia64" ;;
  *-freebsd[3-9]*) OUT="FreeBSD-elf" ;;
  *-freebsd[1-2]*) OUT="FreeBSD" ;;
  *86*-*-netbsd) OUT="NetBSD-x86" ;;
@@ -695,9 +698,11 @@ EOF
 	CPU_VERSION=${CPU_VERSION:-0}
 	# See <sys/unistd.h> for further info on CPU_VERSION.
 	if   [ $CPU_VERSION -ge 768 ]; then	# IA-64 CPU
-	     echo "NOTICE! 64-bit is the only ABI currently operational on HP-UXi."
-	     echo "        Post request to openssl-dev@openssl.org for 32-bit support."
+	     echo "WARNING! 64-bit ABI is the default configured ABI on HP-UXi."
+	     echo "         If you wish to build 32-bit library, the you have to"
+	     echo "         invoke './Configure hpux-ia32-cc' *manually*."
 	     if [ "$TEST" = "false" ]; then
+		echo "         You have about 5 seconds to press Ctrl-C to abort."
 		(stty -icanon min 0 time 50; read waste) < /dev/tty
 	     fi
 	     OUT="hpux64-ia64-cc"
--- a/crypto/Makefile.ssl
+++ b/crypto/Makefile.ssl
@@ -141,7 +141,7 @@ depend:
 	@for i in $(SDIRS) ;\
 	do \
 	(cd $$i && echo "making depend in crypto/$$i..." && \
-	$(MAKE) MAKEFILE='${MAKEFILE}' INCLUDES='${INCLUDES}' CFLAG='${CFLAG}' DEPFLAG='${DEPFLAG}' PERL='${PERL}' depend ); \
+	$(MAKE) MAKEFILE='${MAKEFILE}' INCLUDES='${INCLUDES}' CFLAG='${CFLAG}' DEPFLAG='${DEPFLAG}' MAKEDEPPROG='${MAKEDEPPROG}' KRB5_INCLUDES='${KRB5_INCLUDES}' PERL='${PERL}' depend ); \
 	done;

 clean:
--- a/crypto/aes/aes.h
+++ b/crypto/aes/aes.h
@@ -56,8 +56,9 @@
 #error AES is disabled.
 #endif

-static const int AES_DECRYPT = 0;
-static const int AES_ENCRYPT = 1;
+#define AES_ENCRYPT	1
+#define AES_DECRYPT	0
+
 /* Because array size can't be a const in C, the following two are macros.
   Both sizes are in bytes. */
 #define AES_MAXNR 14
--- a/crypto/aes/aes_core.c
+++ b/crypto/aes/aes_core.c
@@ -750,7 +750,7 @@ int AES_set_encrypt_key(const unsigned char *userKey, const int bits,
 	rk[2] = GETU32(userKey +  8);
 	rk[3] = GETU32(userKey + 12);
 	if (bits == 128) {
-		for (;;) {
+		while (1) {
 			temp  = rk[3];
 			rk[4] = rk[0] ^
 				(Te4[(temp >> 16) & 0xff] & 0xff000000) ^
@@ -770,7 +770,7 @@ int AES_set_encrypt_key(const unsigned char *userKey, const int bits,
 	rk[4] = GETU32(userKey + 16);
 	rk[5] = GETU32(userKey + 20);
 	if (bits == 192) {
-		for (;;) {
+		while (1) {
 			temp = rk[ 5];
 			rk[ 6] = rk[ 0] ^
 				(Te4[(temp >> 16) & 0xff] & 0xff000000) ^
@@ -792,7 +792,7 @@ int AES_set_encrypt_key(const unsigned char *userKey, const int bits,
 	rk[6] = GETU32(userKey + 24);
 	rk[7] = GETU32(userKey + 28);
 	if (bits == 256) {
-		for (;;) {
+		while (1) {
 			temp = rk[ 7];
 			rk[ 8] = rk[ 0] ^
 				(Te4[(temp >> 16) & 0xff] & 0xff000000) ^
--- a/crypto/asn1/a_d2i_fp.c
+++ b/crypto/asn1/a_d2i_fp.c
@@ -149,7 +149,12 @@ static int asn1_d2i_read_bio(BIO *in, BUF_MEM **pb)
 	ASN1_CTX c;
 	int want=HEADER_SIZE;
 	int eos=0;
+#if defined(__GNUC__) && defined(__ia64)
+	/* pathetic compiler bug in all known versions as of Nov. 2002 */
+	long off=0;
+#else
 	int off=0;
+#endif
 	int len=0;

 	b=BUF_MEM_new();
--- a/crypto/asn1/a_time.c
+++ b/crypto/asn1/a_time.c
@@ -105,7 +105,10 @@ ASN1_TIME *ASN1_TIME_set(ASN1_TIME *s, time_t t)

 	ts=OPENSSL_gmtime(&t,&data);
 	if (ts == NULL)
+		{
+		ASN1err(ASN1_F_ASN1_TIME_SET, ASN1_R_ERROR_GETTING_TIME);
 		return NULL;
+		}
 	if((ts->tm_year >= 50) && (ts->tm_year < 150))
 					return ASN1_UTCTIME_set(s, t);
 	return ASN1_GENERALIZEDTIME_set(s,t);
@@ -152,7 +155,7 @@ ASN1_GENERALIZEDTIME *ASN1_TIME_to_generalizedtime(ASN1_TIME *t, ASN1_GENERALIZE
 	if (t->data[0] >= '5') strcpy(str, "19");
 	else strcpy(str, "20");

-	BUF_strlcat(str, (char *)t->data, t->length+2);
+	BUF_strlcat(str, (char *)t->data, t->length+3);	/* Include space for a '\0' */

 	return ret;
 	}
--- a/crypto/asn1/asn1.h
+++ b/crypto/asn1/asn1.h
@@ -980,6 +980,7 @@ void ERR_load_ASN1_strings(void);
 #define ASN1_F_ASN1_TEMPLATE_D2I			 131
 #define ASN1_F_ASN1_TEMPLATE_EX_D2I			 132
 #define ASN1_F_ASN1_TEMPLATE_NEW			 133
+#define ASN1_F_ASN1_TIME_SET				 175
 #define ASN1_F_ASN1_TYPE_GET_INT_OCTETSTRING		 134
 #define ASN1_F_ASN1_TYPE_GET_OCTETSTRING		 135
 #define ASN1_F_ASN1_UNPACK_STRING			 136
@@ -1037,6 +1038,7 @@ void ERR_load_ASN1_strings(void);
 #define ASN1_R_DECODE_ERROR				 110
 #define ASN1_R_DECODING_ERROR				 111
 #define ASN1_R_ENCODE_ERROR				 112
+#define ASN1_R_ERROR_GETTING_TIME			 173
 #define ASN1_R_ERROR_LOADING_SECTION			 172
 #define ASN1_R_ERROR_PARSING_SET_ELEMENT		 113
 #define ASN1_R_ERROR_SETTING_CIPHER_PARAMS		 114
--- a/crypto/asn1/asn1_err.c
+++ b/crypto/asn1/asn1_err.c
@@ -1,6 +1,6 @@
 /* crypto/asn1/asn1_err.c */
 /* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1999-2002 The OpenSSL Project.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
@@ -100,6 +100,7 @@ static ERR_STRING_DATA ASN1_str_functs[]=
 {ERR_PACK(0,ASN1_F_ASN1_TEMPLATE_D2I,0),	"ASN1_TEMPLATE_D2I"},
 {ERR_PACK(0,ASN1_F_ASN1_TEMPLATE_EX_D2I,0),	"ASN1_TEMPLATE_EX_D2I"},
 {ERR_PACK(0,ASN1_F_ASN1_TEMPLATE_NEW,0),	"ASN1_TEMPLATE_NEW"},
+{ERR_PACK(0,ASN1_F_ASN1_TIME_SET,0),	"ASN1_TIME_set"},
 {ERR_PACK(0,ASN1_F_ASN1_TYPE_GET_INT_OCTETSTRING,0),	"ASN1_TYPE_get_int_octetstring"},
 {ERR_PACK(0,ASN1_F_ASN1_TYPE_GET_OCTETSTRING,0),	"ASN1_TYPE_get_octetstring"},
 {ERR_PACK(0,ASN1_F_ASN1_UNPACK_STRING,0),	"ASN1_unpack_string"},
@@ -160,6 +161,7 @@ static ERR_STRING_DATA ASN1_str_reasons[]=
 {ASN1_R_DECODE_ERROR                     ,"decode error"},
 {ASN1_R_DECODING_ERROR                   ,"decoding error"},
 {ASN1_R_ENCODE_ERROR                     ,"encode error"},
+{ASN1_R_ERROR_GETTING_TIME               ,"error getting time"},
 {ASN1_R_ERROR_LOADING_SECTION            ,"error loading section"},
 {ASN1_R_ERROR_PARSING_SET_ELEMENT        ,"error parsing set element"},
 {ASN1_R_ERROR_SETTING_CIPHER_PARAMS      ,"error setting cipher params"},
--- a/crypto/bf/Makefile.ssl
+++ b/crypto/bf/Makefile.ssl
@@ -49,14 +49,8 @@ lib:	$(LIBOBJ)
 	@touch lib

 # elf
-asm/bx86-elf.o: asm/bx86unix.cpp
-	$(CPP) -DELF -x c asm/bx86unix.cpp | as -o asm/bx86-elf.o
-
-# solaris
-asm/bx86-sol.o: asm/bx86unix.cpp
-	$(CC) -E -DSOL asm/bx86unix.cpp | sed 's/^#.*//' > asm/bx86-sol.s
-	as -o asm/bx86-sol.o asm/bx86-sol.s
-	rm -f asm/bx86-sol.s
+asm/bx86-elf.s: asm/bf-586.pl ../perlasm/x86asm.pl ../perlasm/cbc.pl
+	(cd asm; $(PERL) bf-586.pl elf $(CFLAGS) $(PROCESSOR) > bx86-elf.s)

 # a.out
 asm/bx86-out.o: asm/bx86unix.cpp
@@ -103,7 +97,7 @@ dclean:
 	mv -f Makefile.new $(MAKEFILE)

 clean:
-	rm -f asm/bx86unix.cpp *.o asm/*.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
+	rm -f asm/bx86unix.cpp asm/*-elf.* *.o asm/*.o *.obj lib tags core .pure .nfs* *.old *.bak fluff

 # DO NOT DELETE THIS LINE -- make depend depends on it.

--- a/crypto/bf/asm/.cvsignore
+++ b/crypto/bf/asm/.cvsignore
@@ -1 +1,2 @@
 bx86unix.cpp
+bx86-elf.s
--- a/crypto/bio/b_sock.c
+++ b/crypto/bio/b_sock.c
@@ -492,7 +492,7 @@ void BIO_sock_cleanup(void)

 #if !defined(OPENSSL_SYS_VMS) || __VMS_VER >= 70000000

-int BIO_socket_ioctl(int fd, long type, unsigned long *arg)
+int BIO_socket_ioctl(int fd, long type, void *arg)
 	{
 	int i;

@@ -742,7 +742,7 @@ int BIO_set_tcp_ndelay(int s, int on)
 int BIO_socket_nbio(int s, int mode)
 	{
 	int ret= -1;
-	unsigned long l;
+	int l;

 	l=mode;
 #ifdef FIONBIO
--- a/crypto/bio/bio.h
+++ b/crypto/bio/bio.h
@@ -244,7 +244,7 @@ typedef struct bio_method_st
 	long (_far *ctrl)();
 	int (_far *create)();
 	int (_far *destroy)();
-	long (_fat *callback_ctrl)();
+	long (_far *callback_ctrl)();
 	} BIO_METHOD;
 #endif

@@ -585,7 +585,7 @@ struct hostent *BIO_gethostbyname(const char *name);
 * and an appropriate error code is set).
 */
 int BIO_sock_error(int sock);
-int BIO_socket_ioctl(int fd, long type, unsigned long *arg);
+int BIO_socket_ioctl(int fd, long type, void *arg);
 int BIO_socket_nbio(int fd,int mode);
 int BIO_get_port(const char *str, unsigned short *port_ptr);
 int BIO_get_host_ip(const char *str, unsigned char *ip);
--- a/crypto/bio/bio_lib.c
+++ b/crypto/bio/bio_lib.c
@@ -395,6 +395,8 @@ BIO *BIO_pop(BIO *b)
 	if (b == NULL) return(NULL);
 	ret=b->next_bio;

+	BIO_ctrl(b,BIO_CTRL_POP,0,NULL);
+
 	if (b->prev_bio != NULL)
 		b->prev_bio->next_bio=b->next_bio;
 	if (b->next_bio != NULL)
@@ -402,7 +404,6 @@ BIO *BIO_pop(BIO *b)

 	b->next_bio=NULL;
 	b->prev_bio=NULL;
-	BIO_ctrl(b,BIO_CTRL_POP,0,NULL);
 	return(ret);
 	}

--- a/crypto/bio/bss_file.c
+++ b/crypto/bio/bss_file.c
@@ -247,7 +247,7 @@ static long MS_CALLBACK file_ctrl(BIO *b, int cmd, long num, void *ptr)
 			ret=0;
 			break;
 			}
-#if defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_WINDOWS)
+#if defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_OS2)
 		if (!(num & BIO_FP_TEXT))
 			strcat(p,"b");
 		else
--- a/crypto/bn/Makefile.ssl
+++ b/crypto/bn/Makefile.ssl
@@ -23,14 +23,6 @@ BN_ASM=		bn_asm.o

 CFLAGS= $(INCLUDES) $(CFLAG)

-# We let the C compiler driver to take care of .s files. This is done in
-# order to be excused from maintaining a separate set of architecture
-# dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC
-# gcc, then the driver will automatically translate it to -xarch=v8plus
-# and pass it down to assembler.
-AS=$(CC) -c
-ASFLAGS=$(CFLAGS)
-
 GENERAL=Makefile
 TEST=bntest.c exptest.c
 APPS=
@@ -73,22 +65,11 @@ lib:	$(LIBOBJ)
 	@touch lib

 # elf
-asm/bn86-elf.o: asm/bn86unix.cpp
-	$(CPP) -DELF -x c asm/bn86unix.cpp | as -o asm/bn86-elf.o
+asm/bn86-elf.s:	asm/bn-586.pl ../perlasm/x86asm.pl
+	(cd asm; $(PERL) bn-586.pl elf $(CFLAGS) > bn86-elf.s)

-asm/co86-elf.o: asm/co86unix.cpp
-	$(CPP) -DELF -x c asm/co86unix.cpp | as -o asm/co86-elf.o
-
-# solaris
-asm/bn86-sol.o: asm/bn86unix.cpp
-	$(CC) -E -DSOL asm/bn86unix.cpp | sed 's/^#.*//' > asm/bn86-sol.s
-	as -o asm/bn86-sol.o asm/bn86-sol.s
-	rm -f asm/bn86-sol.s
-
-asm/co86-sol.o: asm/co86unix.cpp
-	$(CC) -E -DSOL asm/co86unix.cpp | sed 's/^#.*//' > asm/co86-sol.s
-	as -o asm/co86-sol.o asm/co86-sol.s
-	rm -f asm/co86-sol.s
+asm/co86-elf.s:	asm/co-586.pl ../perlasm/x86asm.pl
+	(cd asm; $(PERL) co-586.pl elf $(CFLAGS) > co86-elf.s)

 # a.out
 asm/bn86-out.o: asm/bn86unix.cpp
@@ -136,6 +117,8 @@ asm/ia64-cpp.o:	asm/ia64.S
 	$(CC) $(ASFLAGS) -c -o asm/ia64-cpp.o /tmp/ia64.$$$$.s;	\
 	rm -f /tmp/ia64.$$$$.s

+asm/x86_64-gcc.o: asm/x86_64-gcc.c
+
 files:
 	$(PERL) $(TOP)/util/files.pl Makefile.ssl >> $(TOP)/MINFO

@@ -176,7 +159,7 @@ dclean:
 	mv -f Makefile.new $(MAKEFILE)

 clean:
-	rm -f asm/co86unix.cpp asm/bn86unix.cpp *.o */*.o *.obj lib tags core .pure .nfs* *.old *.bak fluff bn_asm.s
+	rm -f asm/co86unix.cpp asm/bn86unix.cpp asm/*-elf.* *.o */*.o *.obj lib tags core .pure .nfs* *.old *.bak fluff bn_asm.s

 # DO NOT DELETE THIS LINE -- make depend depends on it.

--- a/crypto/bn/asm/.cvsignore
+++ b/crypto/bn/asm/.cvsignore
@@ -1,2 +1,4 @@
 bn86unix.cpp
 co86unix.cpp
+bn86-elf.s
+co86-elf.s
--- a/crypto/bn/asm/ia64.S
+++ b/crypto/bn/asm/ia64.S
@@ -1,6 +1,6 @@
 .explicit
 .text
-.ident	"ia64.S, Version 1.1"
+.ident	"ia64.S, Version 2.0"
 .ident	"IA-64 ISA artwork by Andy Polyakov <appro@fy.chalmers.se>"

 //
@@ -13,6 +13,35 @@
 // disclaimed.
 // ====================================================================
 //
+// Version 2.x is Itanium2 re-tune. Few words about how Itanum2 is
+// different from Itanium to this module viewpoint. Most notably, is it
+// "wider" than Itanium? Can you experience loop scalability as
+// discussed in commentary sections? Not really:-( Itanium2 has 6
+// integer ALU ports, i.e. it's 2 ports wider, but it's not enough to
+// spin twice as fast, as I need 8 IALU ports. Amount of floating point
+// ports is the same, i.e. 2, while I need 4. In other words, to this
+// module Itanium2 remains effectively as "wide" as Itanium. Yet it's
+// essentially different in respect to this module, and a re-tune was
+// required. Well, because some intruction latencies has changed. Most
+// noticeably those intensively used:
+//
+//			Itanium	Itanium2
+//	ldf8		9	6		L2 hit
+//	ld8		2	1		L1 hit
+//	getf		2	5
+//	xma[->getf]	7[+1]	4[+0]
+//	add[->st8]	1[+1]	1[+0]
+//
+// What does it mean? You might ratiocinate that the original code
+// should run just faster... Because sum of latencies is smaller...
+// Wrong! Note that getf latency increased. This means that if a loop is
+// scheduled for lower latency (and they are), then it will suffer from
+// stall condition and the code will therefore turn anti-scalable, e.g.
+// original bn_mul_words spun at 5*n or 2.5 times slower than expected
+// on Itanium2! What to do? Reschedule loops for Itanium2? But then
+// Itanium would exhibit anti-scalability. So I've chosen to reschedule
+// for worst latency for every instruction aiming for best *all-round*
+// performance.  

 // Q.	How much faster does it get?
 // A.	Here is the output from 'openssl speed rsa dsa' for vanilla
@@ -149,12 +178,27 @@ bn_add_words:
 	brp.loop.imp	.L_bn_add_words_ctop,.L_bn_add_words_cend-16
 					}
 	.body
-{ .mib;	mov		r14=r32			// rp
+{ .mib;
+#if defined(_HPUX_SOURCE) && defined(_ILP32)
+	addp4		r14=0,r32		// rp
+#else
+	mov		r14=r32			// rp
+#endif
 	mov		r9=pr		};;
-{ .mii;	mov		r15=r33			// ap
+{ .mii;
+#if defined(_HPUX_SOURCE) && defined(_ILP32)
+	addp4		r15=0,r33		// ap
+#else
+	mov		r15=r33			// ap
+#endif
 	mov		ar.lc=r10
 	mov		ar.ec=6		}
-{ .mib;	mov		r16=r34			// bp
+{ .mib;
+#if defined(_HPUX_SOURCE) && defined(_ILP32)
+	addp4		r16=0,r34		// bp
+#else
+	mov		r16=r34			// bp
+#endif
 	mov		pr.rot=1<<16	};;

 .L_bn_add_words_ctop:
@@ -174,7 +218,7 @@ bn_add_words:

 { .mii;
 (p59)	add		r8=1,r8		// return value
-	mov		pr=r9,-1
+	mov		pr=r9,0x1ffff
 	mov		ar.lc=r3	}
 { .mbb;	nop.b		0x0
 	br.ret.sptk.many	b0	};;
@@ -202,12 +246,27 @@ bn_sub_words:
 	brp.loop.imp	.L_bn_sub_words_ctop,.L_bn_sub_words_cend-16
 					}
 	.body
-{ .mib;	mov		r14=r32			// rp
+{ .mib;
+#if defined(_HPUX_SOURCE) && defined(_ILP32)
+	addp4		r14=0,r32		// rp
+#else
+	mov		r14=r32			// rp
+#endif
 	mov		r9=pr		};;
-{ .mii;	mov		r15=r33			// ap
+{ .mii;
+#if defined(_HPUX_SOURCE) && defined(_ILP32)
+	addp4		r15=0,r33		// ap
+#else
+	mov		r15=r33			// ap
+#endif
 	mov		ar.lc=r10
 	mov		ar.ec=6		}
-{ .mib;	mov		r16=r34			// bp
+{ .mib;
+#if defined(_HPUX_SOURCE) && defined(_ILP32)
+	addp4		r16=0,r34		// bp
+#else
+	mov		r16=r34			// bp
+#endif
 	mov		pr.rot=1<<16	};;

 .L_bn_sub_words_ctop:
@@ -227,7 +286,7 @@ bn_sub_words:

 { .mii;
 (p59)	add		r8=1,r8		// return value
-	mov		pr=r9,-1
+	mov		pr=r9,0x1ffff
 	mov		ar.lc=r3	}
 { .mbb;	nop.b		0x0
 	br.ret.sptk.many	b0	};;
@@ -253,7 +312,7 @@ bn_mul_words:
 #ifdef XMA_TEMPTATION
 { .mfi;	alloc		r2=ar.pfs,4,0,0,0	};;
 #else
-{ .mfi;	alloc		r2=ar.pfs,4,4,0,8	};;
+{ .mfi;	alloc		r2=ar.pfs,4,12,0,16	};;
 #endif
 { .mib;	mov		r8=r0			// return value
 	cmp4.le		p6,p0=r34,r0
@@ -266,24 +325,30 @@ bn_mul_words:

 	.body
 { .mib;	setf.sig	f8=r35	// w
-	mov		pr.rot=0x400001<<16
-			// ------^----- serves as (p48) at first (p26)
+	mov		pr.rot=0x800001<<16
+			// ------^----- serves as (p50) at first (p27)
 	brp.loop.imp	.L_bn_mul_words_ctop,.L_bn_mul_words_cend-16
 					}

 #ifndef XMA_TEMPTATION

-{ .mii;	mov		r14=r32	// rp
-	mov		r15=r33	// ap
+{ .mii;
+#if defined(_HPUX_SOURCE) && defined(_ILP32)
+	addp4		r14=0,r32	// rp
+	addp4		r15=0,r33	// ap
+#else
+	mov		r14=r32		// rp
+	mov		r15=r33		// ap
+#endif
 	mov		ar.lc=r10	}
-{ .mii;	mov		r39=0	// serves as r33 at first (p26)
-	mov		ar.ec=12	};;
+{ .mii;	mov		r40=0	// serves as r35 at first (p27)
+	mov		ar.ec=13	};;

-// This loop spins in 2*(n+11) ticks. It's scheduled for data in L2
-// cache (i.e. 9 ticks away) as floating point load/store instructions
+// This loop spins in 2*(n+12) ticks. It's scheduled for data in Itanium
+// L2 cache (i.e. 9 ticks away) as floating point load/store instructions
 // bypass L1 cache and L2 latency is actually best-case scenario for
-// ldf8. The loop is not scalable and shall run in 2*(n+11) even on
-// "wider" IA-64 implementations. It's a trade-off here. n+22 loop
+// ldf8. The loop is not scalable and shall run in 2*(n+12) even on
+// "wider" IA-64 implementations. It's a trade-off here. n+24 loop
 // would give us ~5% in *overall* performance improvement on "wider"
 // IA-64, but would hurt Itanium for about same because of longer
 // epilogue. As it's a matter of few percents in either case I've
@@ -291,25 +356,25 @@ bn_mul_words:
 // this very instruction sequence in bn_mul_add_words loop which in
 // turn is scalable).
 .L_bn_mul_words_ctop:
-{ .mfi;	(p25)	getf.sig	r36=f49			// low
-	(p21)	xmpy.lu		f45=f37,f8
-	(p27)	cmp.ltu		p52,p48=r39,r38	}
+{ .mfi;	(p25)	getf.sig	r36=f52			// low
+	(p21)	xmpy.lu		f48=f37,f8
+	(p28)	cmp.ltu		p54,p50=r41,r39	}
 { .mfi;	(p16)	ldf8		f32=[r15],8
-	(p21)	xmpy.hu		f38=f37,f8
+	(p21)	xmpy.hu		f40=f37,f8
 	(p0)	nop.i		0x0		};;
-{ .mii;	(p26)	getf.sig	r32=f43			// high
-	.pred.rel	"mutex",p48,p52
-	(p48)	add		r38=r37,r33		// (p26)
-	(p52)	add		r38=r37,r33,1	}	// (p26)
-{ .mfb;	(p27)	st8		[r14]=r39,8
+{ .mii;	(p25)	getf.sig	r32=f44			// high
+	.pred.rel	"mutex",p50,p54
+	(p50)	add		r40=r38,r35		// (p27)
+	(p54)	add		r40=r38,r35,1	}	// (p27)
+{ .mfb;	(p28)	st8		[r14]=r41,8
 	(p0)	nop.f		0x0
 	br.ctop.sptk	.L_bn_mul_words_ctop	};;
 .L_bn_mul_words_cend:

 { .mii;	nop.m		0x0
-.pred.rel	"mutex",p49,p53
-(p49)	add		r8=r34,r0
-(p53)	add		r8=r34,r0,1	}
+.pred.rel	"mutex",p51,p55
+(p51)	add		r8=r36,r0
+(p55)	add		r8=r36,r0,1	}
 { .mfb;	nop.m	0x0
 	nop.f	0x0
 	nop.b	0x0			}
@@ -344,7 +409,7 @@ bn_mul_words:
 #endif	// XMA_TEMPTATION

 { .mii;	nop.m		0x0
-	mov		pr=r9,-1
+	mov		pr=r9,0x1ffff
 	mov		ar.lc=r3	}
 { .mfb;	rum		1<<5		// clear um.mfh
 	nop.f		0x0
@@ -376,59 +441,69 @@ bn_mul_add_words:

 	.body
 { .mib;	setf.sig	f8=r35	// w
-	mov		pr.rot=0x400001<<16
-			// ------^----- serves as (p48) at first (p26)
+	mov		pr.rot=0x800001<<16
+			// ------^----- serves as (p50) at first (p27)
 	brp.loop.imp	.L_bn_mul_add_words_ctop,.L_bn_mul_add_words_cend-16
 					}
-{ .mii;	mov		r14=r32	// rp
-	mov		r15=r33	// ap
+{ .mii;
+#if defined(_HPUX_SOURCE) && defined(_ILP32)
+	addp4		r14=0,r32	// rp
+	addp4		r15=0,r33	// ap
+#else
+	mov		r14=r32		// rp
+	mov		r15=r33		// ap
+#endif
 	mov		ar.lc=r10	}
-{ .mii;	mov		r39=0	// serves as r33 at first (p26)
-	mov		r18=r32	// rp copy
-	mov		ar.ec=14	};;
+{ .mii;	mov		r40=0	// serves as r35 at first (p27)
+#if defined(_HPUX_SOURCE) && defined(_ILP32)
+	addp4		r18=0,r32	// rp copy
+#else
+	mov		r18=r32		// rp copy
+#endif
+	mov		ar.ec=15	};;

-// This loop spins in 3*(n+13) ticks on Itanium and should spin in
-// 2*(n+13) on "wider" IA-64 implementations (to be verified with new
+// This loop spins in 3*(n+14) ticks on Itanium and should spin in
+// 2*(n+14) on "wider" IA-64 implementations (to be verified with new
 // <EFBFBD>-architecture manuals as they become available). As usual it's
 // possible to compress the epilogue, down to 10 in this case, at the
 // cost of scalability. Compressed (and therefore non-scalable) loop
-// running at 3*(n+10) would buy you ~10% on Itanium but take ~35%
+// running at 3*(n+11) would buy you ~10% on Itanium but take ~35%
 // from "wider" IA-64 so let it be scalable! Special attention was
 // paid for having the loop body split at 64-byte boundary. ld8 is
 // scheduled for L1 cache as the data is more than likely there.
 // Indeed, bn_mul_words has put it there a moment ago:-)
 .L_bn_mul_add_words_ctop:
-{ .mfi;	(p25)	getf.sig	r36=f49			// low
-	(p21)	xmpy.lu		f45=f37,f8
-	(p27)	cmp.ltu		p52,p48=r39,r38	}
+{ .mfi;	(p25)	getf.sig	r36=f52			// low
+	(p21)	xmpy.lu		f48=f37,f8
+	(p28)	cmp.ltu		p54,p50=r41,r39	}
 { .mfi;	(p16)	ldf8		f32=[r15],8
-	(p21)	xmpy.hu		f38=f37,f8
-	(p27)	add		r43=r43,r39	};;
-{ .mii;	(p26)	getf.sig	r32=f43			// high
-	.pred.rel	"mutex",p48,p52
-	(p48)	add		r38=r37,r33		// (p26)
-	(p52)	add		r38=r37,r33,1	}	// (p26)
-{ .mfb;	(p27)	cmp.ltu.unc	p56,p0=r43,r39
+	(p21)	xmpy.hu		f40=f37,f8
+	(p28)	add		r45=r45,r41	};;
+{ .mii;	(p25)	getf.sig	r32=f44			// high
+	.pred.rel	"mutex",p50,p54
+	(p50)	add		r40=r38,r35		// (p27)
+	(p54)	add		r40=r38,r35,1	}	// (p27)
+{ .mfb;	(p28)	cmp.ltu.unc	p60,p0=r45,r41
 	(p0)	nop.f		0x0
 	(p0)	nop.b		0x0		}
-{ .mii;	(p26)	ld8		r42=[r18],8
-	(p58)	cmp.eq.or	p57,p0=-1,r44
-	(p58)	add		r44=1,r44	}
-{ .mfb;	(p29)	st8		[r14]=r45,8
+{ .mii;	(p27)	ld8		r44=[r18],8
+	(p62)	cmp.eq.or	p61,p0=-1,r46
+	(p62)	add		r46=1,r46	}
+{ .mfb;	(p30)	st8		[r14]=r47,8
 	(p0)	nop.f		0x0
 	br.ctop.sptk	.L_bn_mul_add_words_ctop};;
 .L_bn_mul_add_words_cend:

 { .mii;	nop.m		0x0
-.pred.rel	"mutex",p51,p55
-(p51)	add		r8=r36,r0
-(p55)	add		r8=r36,r0,1	}
+.pred.rel	"mutex",p53,p57
+(p53)	add		r8=r38,r0
+(p57)	add		r8=r38,r0,1	}
 { .mfb;	nop.m	0x0
 	nop.f	0x0
 	nop.b	0x0			};;
 { .mii;
-(p59)	add		r8=1,r8
-	mov		pr=r9,-1
+(p63)	add		r8=1,r8
+	mov		pr=r9,0x1ffff
 	mov		ar.lc=r3	}
 { .mfb;	rum		1<<5		// clear um.mfh
 	nop.f		0x0
@@ -461,6 +536,10 @@ bn_sqr_words:
 	mov	r9=pr			};;

 	.body
+#if defined(_HPUX_SOURCE) && defined(_ILP32)
+{ .mii; addp4		r32=0,r32
+	addp4		r33=0,r33	};;
+#endif
 { .mib;
 	mov		pr.rot=1<<16
 	brp.loop.imp	.L_bn_sqr_words_ctop,.L_bn_sqr_words_cend-16
@@ -492,7 +571,7 @@ bn_sqr_words:
 .L_bn_sqr_words_cend:

 { .mii;	nop.m		0x0
-	mov		pr=r9,-1
+	mov		pr=r9,0x1ffff
 	mov		ar.lc=r3	}
 { .mfb;	rum		1<<5		// clear um.mfh
 	nop.f		0x0
@@ -526,7 +605,14 @@ bn_sqr_comba8:
 	.prologue
 	.fframe	0
 	.save	ar.pfs,r2
+#if defined(_HPUX_SOURCE) && defined(_ILP32)
 { .mii;	alloc	r2=ar.pfs,2,1,0,0
+	addp4	r33=0,r33
+	addp4	r32=0,r32		};;
+{ .mii;
+#else
+{ .mii;	alloc	r2=ar.pfs,2,1,0,0
+#endif
 	mov	r34=r33
 	add	r14=8,r33		};;
 	.body
@@ -587,7 +673,14 @@ bn_mul_comba8:
 	.prologue
 	.fframe	0
 	.save	ar.pfs,r2
+#if defined(_HPUX_SOURCE) && defined(_ILP32)
 { .mii;	alloc	r2=ar.pfs,3,0,0,0
+	addp4	r33=0,r33
+	addp4	r34=0,r34		};;
+{ .mii;	addp4	r32=0,r32
+#else
+{ .mii;	alloc   r2=ar.pfs,3,0,0,0
+#endif
 	add	r14=8,r33
 	add	r17=8,r34		}
 	.body
@@ -1138,7 +1231,14 @@ bn_sqr_comba4:
 	.prologue
 	.fframe	0
 	.save	ar.pfs,r2
+#if defined(_HPUX_SOURCE) && defined(_ILP32)
+{ .mii;	alloc   r2=ar.pfs,2,1,0,0
+	addp4	r32=0,r32
+	addp4	r33=0,r33		};;
+{ .mii;
+#else
 { .mii;	alloc	r2=ar.pfs,2,1,0,0
+#endif
 	mov	r34=r33
 	add	r14=8,r33		};;
 	.body
@@ -1164,7 +1264,14 @@ bn_mul_comba4:
 	.prologue
 	.fframe	0
 	.save	ar.pfs,r2
+#if defined(_HPUX_SOURCE) && defined(_ILP32)
+{ .mii;	alloc   r2=ar.pfs,3,0,0,0
+	addp4	r33=0,r33
+	addp4	r34=0,r34		};;
+{ .mii;	addp4	r32=0,r32
+#else
 { .mii;	alloc	r2=ar.pfs,3,0,0,0
+#endif
 	add	r14=8,r33
 	add	r17=8,r34		}
 	.body
@@ -1464,7 +1571,7 @@ bn_div_words:
 	or	r8=r8,r33
 	mov	ar.pfs=r2		};;
 { .mii;	shr.u	r9=H,I			// remainder if anybody wants it
-	mov	pr=r10,-1		}
+	mov	pr=r10,0x1ffff		}
 { .mfb;	br.ret.sptk.many	b0	};;

 // Unsigned 64 by 32 (well, by 64 for the moment) bit integer division
--- a/crypto/bn/asm/pa-risc2.s
+++ b/crypto/bn/asm/pa-risc2.s
@@ -747,8 +747,8 @@ bn_div_words
 	.PROC
 	.EXPORT	bn_div_words,ENTRY,PRIV_LEV=3,ARGW0=GR,ARGW1=GR,ARGW2=GR,ARGW3=GR,RTNVAL=GR,LONG_RETURN
 	.IMPORT	BN_num_bits_word,CODE
-	.IMPORT	__iob,DATA
-	.IMPORT	fprintf,CODE
+	;--- not PIC	.IMPORT	__iob,DATA
+	;--- not PIC	.IMPORT	fprintf,CODE
 	.IMPORT	abort,CODE
 	.IMPORT	$$div2U,MILLICODE
 	.CALLINFO CALLER,FRAME=144,ENTRY_GR=%r9,SAVE_RP,ARGS_SAVED,ORDERING_AWARE
@@ -844,12 +844,12 @@ $0006001A
        MOVIB,TR        2,%r8,$0006001C ;offset 0xa18
        EXTRD,U %r3,63,32,%r7   ;offset 0xa1c
 $D2
-        ADDIL   LR'__iob-$global$,%r27,%r1      ;offset 0xa20
-        LDIL    LR'C$7,%r21     ;offset 0xa24
-        LDO     RR'__iob-$global$+32(%r1),%r26  ;offset 0xa28
-        .CALL   ARGW0=GR,ARGW1=GR,ARGW2=GR,RTNVAL=GR    ;in=24,25,26;out=28;
-        B,L     fprintf,%r2     ;offset 0xa2c
-        LDO     RR'C$7(%r21),%r25       ;offset 0xa30
+        ;--- not PIC	ADDIL   LR'__iob-$global$,%r27,%r1      ;offset 0xa20
+        ;--- not PIC	LDIL    LR'C$7,%r21     ;offset 0xa24
+        ;--- not PIC	LDO     RR'__iob-$global$+32(%r1),%r26  ;offset 0xa28
+        ;--- not PIC	.CALL   ARGW0=GR,ARGW1=GR,ARGW2=GR,RTNVAL=GR    ;in=24,25,26;out=28;
+        ;--- not PIC	B,L     fprintf,%r2     ;offset 0xa2c
+        ;--- not PIC	LDO     RR'C$7(%r21),%r25       ;offset 0xa30
        .CALL           ;
        B,L     abort,%r2       ;offset 0xa34
        NOP             ;offset 0xa38
@@ -1605,14 +1605,14 @@ bn_mul_comba4
 	.PROCEND	


-	.SPACE	$TEXT$
-	.SUBSPA	$CODE$
-	.SPACE	$PRIVATE$,SORT=16
-	.IMPORT	$global$,DATA
-	.SPACE	$TEXT$
-	.SUBSPA	$CODE$
-	.SUBSPA	$LIT$,ACCESS=0x2c
-C$7
-	.ALIGN	8
-	.STRINGZ	"Division would overflow (%d)\n"
+;--- not PIC	.SPACE	$TEXT$
+;--- not PIC	.SUBSPA	$CODE$
+;--- not PIC	.SPACE	$PRIVATE$,SORT=16
+;--- not PIC	.IMPORT	$global$,DATA
+;--- not PIC	.SPACE	$TEXT$
+;--- not PIC	.SUBSPA	$CODE$
+;--- not PIC	.SUBSPA	$LIT$,ACCESS=0x2c
+;--- not PIC	C$7
+;--- not PIC	.ALIGN	8
+;--- not PIC	.STRINGZ	"Division would overflow (%d)\n"
 	.END
--- a/crypto/bn/asm/vms.mar
+++ b/crypto/bn/asm/vms.mar
@@ -172,7 +172,7 @@ n=12 ;(AP)	n	by value (input)
 ; }
 ;
 ; Using EDIV would be very easy, if it didn't do signed calculations.
-; Any time, any of the input numbers are signed, there are problems,
+; Any time any of the input numbers are signed, there are problems,
 ; usually with integer overflow, at which point it returns useless
 ; data (the quotient gets the value of l, and the remainder becomes 0).
 ;
@@ -180,21 +180,26 @@ n=12 ;(AP)	n	by value (input)
 ; it by 2 (unsigned), do the division, multiply the resulting quotient
 ; and remainder by 2, add the bit that was dropped when dividing by 2
 ; to the remainder, and do some adjustment so the remainder doesn't
-; end up larger than the divisor.  This method works as long as the
-; divisor is positive, so we'll keep that (with a small adjustment)
-; as the main method.
-; For some cases when the divisor is negative (from EDIV's point of
-; view, i.e. when the highest bit is set), dividing the dividend by
-; 2 isn't enough, it needs to be divided by 4.  Furthermore, the
-; divisor needs to be divided by 2 (unsigned) as well, to avoid more
-; problems with the sign.  In this case, a little extra fiddling with
-; the remainder is required.
+; end up larger than the divisor.  For some cases when the divisor is
+; negative (from EDIV's point of view, i.e. when the highest bit is set),
+; dividing the dividend by 2 isn't enough, and since some operations
+; might generate integer overflows even when the dividend is divided by
+; 4 (when the high part of the shifted down dividend ends up being exactly
+; half of the divisor, the result is the quotient 0x80000000, which is
+; negative...) it needs to be divided by 8.  Furthermore, the divisor needs
+; to be divided by 2 (unsigned) as well, to avoid more problems with the sign.
+; In this case, a little extra fiddling with the remainder is required.
 ;
 ; So, the simplest way to handle this is always to divide the dividend
-; by 4, and to divide the divisor by 2 if it's highest bit is set.
-; After EDIV has been used, the quotient gets multiplied by 4 if the
-; original divisor was positive, otherwise 2.  The remainder, oddly
-; enough, is *always* multiplied by 4.
+; by 8, and to divide the divisor by 2 if it's highest bit is set.
+; After EDIV has been used, the quotient gets multiplied by 8 if the
+; original divisor was positive, otherwise 4.  The remainder, oddly
+; enough, is *always* multiplied by 8.
+; NOTE: in the case mentioned above, where the high part of the shifted
+; down dividend ends up being exactly half the shifted down divisor, we
+; end up with a 33 bit quotient.  That's no problem however, it usually
+; means we have ended up with a too large remainder as well, and the
+; problem is fixed by the last part of the algorithm (next paragraph).
 ;
 ; The routine ends with comparing the resulting remainder with the
 ; original divisor and if the remainder is larger, subtract the
@@ -204,15 +209,19 @@ n=12 ;(AP)	n	by value (input)
 ; The complete algorithm looks like this:
 ;
 ; d'    = d
-; l'    = l & 3
-; [h,l] = [h,l] >> 2
+; l'    = l & 7
+; [h,l] = [h,l] >> 3
 ; [q,r] = floor([h,l] / d)	# This is the EDIV operation
 ; if (q < 0) q = -q		# I doubt this is necessary any more
 ;
-; r'    = r >> 30
-; if (d' >= 0) q = q << 1
-; q     = q << 1
-; r     = (r << 2) + l'
+; r'    = r >> 29
+; if (d' >= 0)
+;   q'  = q >> 29
+;   q   = q << 3
+; else
+;   q'  = q >> 30
+;   q   = q << 2
+; r     = (r << 3) + l'
 ;
 ; if (d' < 0)
 ;   {
@@ -220,14 +229,14 @@ n=12 ;(AP)	n	by value (input)
 ;     while ([r',r] < 0)
 ;       {
 ;         [r',r] = [r',r] + d
-;         q = q - 1
+;         [q',q] = [q',q] - 1
 ;       }
 ;   }
 ;
-; while ([r',r] >= d)
+; while ([r',r] >= d')
 ;   {
-;     [r',r] = [r',r] - d
-;     q = q + 1
+;     [r',r] = [r',r] - d'
+;     [q',q] = [q',q] + 1
 ;   }
 ;
 ; return q
@@ -236,31 +245,37 @@ h=4 ;(AP)	h	by value (input)
 l=8 ;(AP)	l	by value (input)
 d=12 ;(AP)	d	by value (input)

-;lprim=r5
-;rprim=r6
-;dprim=r7
-
+;r2 = l, q
+;r3 = h, r
+;r4 = d
+;r5 = l'
+;r6 = r'
+;r7 = d'
+;r8 = q'

 	.psect	code,nowrt

-.entry	bn_div_words,^m<r2,r3,r4,r5,r6,r7>
+.entry	bn_div_words,^m<r2,r3,r4,r5,r6,r7,r8>
 	movl	l(ap),r2
 	movl	h(ap),r3
 	movl	d(ap),r4

-	bicl3	#^XFFFFFFFC,r2,r5 ; l' = l & 3
-	bicl3	#^X00000003,r2,r2
+	bicl3	#^XFFFFFFF8,r2,r5 ; l' = l & 7
+	bicl3	#^X00000007,r2,r2

-	bicl3	#^XFFFFFFFC,r3,r6
-	bicl3	#^X00000003,r3,r3
+	bicl3	#^XFFFFFFF8,r3,r6
+	bicl3	#^X00000007,r3,r3
        
 	addl	r6,r2
-	rotl	#-2,r2,r2	; l = l >> 2
-	rotl	#-2,r3,r3	; h = h >> 2
+
+	rotl	#-3,r2,r2	; l = l >> 3
+	rotl	#-3,r3,r3	; h = h >> 3
                
-	movl	#0,r6
 	movl	r4,r7		; d' = d

+	movl	#0,r6		; r' = 0
+	movl	#0,r8		; q' = 0
+
 	tstl	r4
 	beql	666$		; Uh-oh, the divisor is 0...
 	bgtr	1$
@@ -277,37 +292,36 @@ d=12 ;(AP)	d	by value (input)
 3$:     
 	tstl	r7
 	blss	4$
-	ashl	#1,r2,r2	; q = q << 1
-4$:     
-	ashl	#1,r2,r2	; q = q << 1
-	rotl	#2,r3,r3	; r = r << 2
-	bicl3	#^XFFFFFFFC,r3,r6 ; r' gets the high bits from r
-	bicl3	#^X00000003,r3,r3
+	rotl	#3,r2,r2	;   q = q << 3
+	bicl3	#^XFFFFFFF8,r2,r8 ;    q' gets the high bits from q
+	bicl3	#^X00000007,r2,r2
+	bsb	41$
+4$:				; else
+	rotl	#2,r2,r2	;   q = q << 2
+	bicl3	#^XFFFFFFFC,r2,r8 ;   q' gets the high bits from q
+	bicl3	#^X00000003,r2,r2
+41$:
+	rotl	#3,r3,r3	; r = r << 3
+	bicl3	#^XFFFFFFF8,r3,r6 ; r' gets the high bits from r
+	bicl3	#^X00000007,r3,r3
 	addl	r5,r3		; r = r + l'

 	tstl	r7
 	bgeq	5$
 	bitl	#1,r7
-	beql	5$		; if d < 0 && d & 1
-	subl	r2,r3		;   [r',r] = [r',r] - q
-	sbwc	#0,r6
+	beql	5$		; if d' < 0 && d' & 1
+	subl	r2,r3		;   [r',r] = [r',r] - [q',q]
+	sbwc	r8,r6
 45$:
 	bgeq	5$		;   while r < 0
-	decl	r2		;     q = q - 1
-	addl	r7,r3		;     [r',r] = [r',r] + d
+	decl	r2		;     [q',q] = [q',q] - 1
+	sbwc	#0,r8
+	addl	r7,r3		;     [r',r] = [r',r] + d'
 	adwc	#0,r6
 	brb	45$

-5$:
-	tstl	r6
-	bneq	6$
-	cmpl	r3,r7
-	blssu	42$		; while [r',r] >= d'
-6$:
-	subl	r7,r3		;   [r',r] = [r',r] - d
-	sbwc	#0,r6
-	incl	r2		;   q = q + 1
-	brb	5$	
+; The return points are placed in the middle to keep a short distance from
+; all the branch points
 42$:
 ;	movl	r3,r1
 	movl	r2,r0
@@ -315,6 +329,18 @@ d=12 ;(AP)	d	by value (input)
 666$:
 	movl	#^XFFFFFFFF,r0
 	ret
+
+5$:
+	tstl	r6
+	bneq	6$
+	cmpl	r3,r7
+	blssu	42$		; while [r',r] >= d'
+6$:
+	subl	r7,r3		;   [r',r] = [r',r] - d'
+	sbwc	#0,r6
+	incl	r2		;   [q',q] = [q',q] + 1
+	adwc	#0,r8
+	brb	5$	

 	.title	vax_bn_add_words  unsigned add of two arrays
 ;
--- a/crypto/bn/asm/x86_64-gcc.c
+++ b/crypto/bn/asm/x86_64-gcc.c
@@ -0,0 +1,575 @@
+/*
+ * x86_64 BIGNUM accelerator version 0.1, December 2002.
+ *
+ * Implemented by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+ * project.
+ *
+ * Rights for redistribution and usage in source and binary forms are
+ * granted according to the OpenSSL license. Warranty of any kind is
+ * disclaimed.
+ *
+ * Q. Version 0.1? It doesn't sound like Andy, he used to assign real
+ *    versions, like 1.0...
+ * A. Well, that's because this code is basically a quick-n-dirty
+ *    proof-of-concept hack. As you can see it's implemented with
+ *    inline assembler, which means that you're bound to GCC and that
+ *    there must be a room for fine-tuning.
+ *
+ * Q. Why inline assembler?
+ * A. x86_64 features own ABI I'm not familiar with. Which is why
+ *    I decided to let the compiler take care of subroutine
+ *    prologue/epilogue as well as register allocation.
+ *
+ * Q. How much faster does it get?
+ * A. Unfortunately people sitting on x86_64 hardware are prohibited
+ *    to disclose the performance numbers, so they (SuSE labs to be
+ *    specific) wouldn't tell me. However! Very similar coding technique
+ *    (reaching out for 128-bit result from 64x64-bit multiplication)
+ *    results in >3 times performance improvement on MIPS and I see no
+ *    reason why gain on x86_64 would be so much different:-)
+ */
+
+#define BN_ULONG unsigned long
+
+/*
+ * "m"(a), "+m"(r)	is the way to favor DirectPath <20>-code;
+ * "g"(0)		let the compiler to decide where does it
+ *			want to keep the value of zero;
+ */
+#define mul_add(r,a,word,carry) do {	\
+	register BN_ULONG high,low;	\
+	asm ("mulq %3"			\
+		: "=a"(low),"=d"(high)	\
+		: "a"(word),"m"(a)	\
+		: "cc");		\
+	asm ("addq %2,%0; adcq %3,%1"	\
+		: "+r"(carry),"+d"(high)\
+		: "a"(low),"g"(0)	\
+		: "cc");		\
+	asm ("addq %2,%0; adcq %3,%1"	\
+		: "+m"(r),"+d"(high)	\
+		: "r"(carry),"g"(0)	\
+		: "cc");		\
+	carry=high;			\
+	} while (0)
+
+#define mul(r,a,word,carry) do {	\
+	register BN_ULONG high,low;	\
+	asm ("mulq %3"			\
+		: "=a"(low),"=d"(high)	\
+		: "a"(word),"g"(a)	\
+		: "cc");		\
+	asm ("addq %2,%0; adcq %3,%1"	\
+		: "+r"(carry),"+d"(high)\
+		: "a"(low),"g"(0)	\
+		: "cc");		\
+	(r)=carry, carry=high;		\
+	} while (0)
+
+#define sqr(r0,r1,a)			\
+	asm ("mulq %2"			\
+		: "=a"(r0),"=d"(r1)	\
+		: "a"(a)		\
+		: "cc");
+
+BN_ULONG bn_mul_add_words(BN_ULONG *rp, BN_ULONG *ap, int num, BN_ULONG w)
+	{
+	BN_ULONG c1=0;
+
+	if (num <= 0) return(c1);
+
+	while (num&~3)
+		{
+		mul_add(rp[0],ap[0],w,c1);
+		mul_add(rp[1],ap[1],w,c1);
+		mul_add(rp[2],ap[2],w,c1);
+		mul_add(rp[3],ap[3],w,c1);
+		ap+=4; rp+=4; num-=4;
+		}
+	if (num)
+		{
+		mul_add(rp[0],ap[0],w,c1); if (--num==0) return c1;
+		mul_add(rp[1],ap[1],w,c1); if (--num==0) return c1;
+		mul_add(rp[2],ap[2],w,c1); return c1;
+		}
+	
+	return(c1);
+	} 
+
+BN_ULONG bn_mul_words(BN_ULONG *rp, BN_ULONG *ap, int num, BN_ULONG w)
+	{
+	BN_ULONG c1=0;
+
+	if (num <= 0) return(c1);
+
+	while (num&~3)
+		{
+		mul(rp[0],ap[0],w,c1);
+		mul(rp[1],ap[1],w,c1);
+		mul(rp[2],ap[2],w,c1);
+		mul(rp[3],ap[3],w,c1);
+		ap+=4; rp+=4; num-=4;
+		}
+	if (num)
+		{
+		mul(rp[0],ap[0],w,c1); if (--num == 0) return c1;
+		mul(rp[1],ap[1],w,c1); if (--num == 0) return c1;
+		mul(rp[2],ap[2],w,c1);
+		}
+	return(c1);
+	} 
+
+void bn_sqr_words(BN_ULONG *r, BN_ULONG *a, int n)
+        {
+	if (n <= 0) return;
+
+	while (n&~3)
+		{
+		sqr(r[0],r[1],a[0]);
+		sqr(r[2],r[3],a[1]);
+		sqr(r[4],r[5],a[2]);
+		sqr(r[6],r[7],a[3]);
+		a+=4; r+=8; n-=4;
+		}
+	if (n)
+		{
+		sqr(r[0],r[1],a[0]); if (--n == 0) return;
+		sqr(r[2],r[3],a[1]); if (--n == 0) return;
+		sqr(r[4],r[5],a[2]);
+		}
+	}
+
+BN_ULONG bn_div_words(BN_ULONG h, BN_ULONG l, BN_ULONG d)
+{	BN_ULONG ret,waste;
+
+	asm ("divq	%3"
+		: "=a"(ret),"=d"(waste)
+		: "a"(l),"d"(h),"g"(d)
+		: "cc");
+
+	return ret;
+}
+
+BN_ULONG bn_add_words (BN_ULONG *rp, BN_ULONG *ap, BN_ULONG *bp,int n)
+{ BN_ULONG ret,i;
+
+	if (n <= 0) return 0;
+
+	asm (
+	"	subq	%2,%2		\n"
+	".align 16			\n"
+	"1:	movq	(%4,%2,8),%0	\n"
+	"	adcq	(%5,%2,8),%0	\n"
+	"	movq	%0,(%3,%2,8)	\n"
+	"	leaq	1(%2),%2	\n"
+	"	loop	1b		\n"
+	"	sbbq	%0,%0		\n"
+		: "+a"(ret),"+c"(n),"+r"(i)
+		: "r"(rp),"r"(ap),"r"(bp)
+		: "cc"
+	);
+
+  return ret&1;
+}
+
+#ifndef SIMICS
+BN_ULONG bn_sub_words (BN_ULONG *rp, BN_ULONG *ap, BN_ULONG *bp,int n)
+{ BN_ULONG ret,i;
+
+	if (n <= 0) return 0;
+
+	asm (
+	"	subq	%2,%2		\n"
+	".align 16			\n"
+	"1:	movq	(%4,%2,8),%0	\n"
+	"	sbbq	(%5,%2,8),%0	\n"
+	"	movq	%0,(%3,%2,8)	\n"
+	"	leaq	1(%2),%2	\n"
+	"	loop	1b		\n"
+	"	sbbq	%0,%0		\n"
+		: "+a"(ret),"+c"(n),"+r"(i)
+		: "r"(rp),"r"(ap),"r"(bp)
+		: "cc"
+	);
+
+  return ret&1;
+}
+#else
+/* Simics 1.4<7 has buggy sbbq:-( */
+#define BN_MASK2 0xffffffffffffffffL
+BN_ULONG bn_sub_words(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n)
+        {
+	BN_ULONG t1,t2;
+	int c=0;
+
+	if (n <= 0) return((BN_ULONG)0);
+
+	for (;;)
+		{
+		t1=a[0]; t2=b[0];
+		r[0]=(t1-t2-c)&BN_MASK2;
+		if (t1 != t2) c=(t1 < t2);
+		if (--n <= 0) break;
+
+		t1=a[1]; t2=b[1];
+		r[1]=(t1-t2-c)&BN_MASK2;
+		if (t1 != t2) c=(t1 < t2);
+		if (--n <= 0) break;
+
+		t1=a[2]; t2=b[2];
+		r[2]=(t1-t2-c)&BN_MASK2;
+		if (t1 != t2) c=(t1 < t2);
+		if (--n <= 0) break;
+
+		t1=a[3]; t2=b[3];
+		r[3]=(t1-t2-c)&BN_MASK2;
+		if (t1 != t2) c=(t1 < t2);
+		if (--n <= 0) break;
+
+		a+=4;
+		b+=4;
+		r+=4;
+		}
+	return(c);
+	}
+#endif
+
+/* mul_add_c(a,b,c0,c1,c2)  -- c+=a*b for three word number c=(c2,c1,c0) */
+/* mul_add_c2(a,b,c0,c1,c2) -- c+=2*a*b for three word number c=(c2,c1,c0) */
+/* sqr_add_c(a,i,c0,c1,c2)  -- c+=a[i]^2 for three word number c=(c2,c1,c0) */
+/* sqr_add_c2(a,i,c0,c1,c2) -- c+=2*a[i]*a[j] for three word number c=(c2,c1,c0) */
+
+#if 0
+/* original macros are kept for reference purposes */
+#define mul_add_c(a,b,c0,c1,c2) {	\
+	BN_ULONG ta=(a),tb=(b);		\
+	t1 = ta * tb;			\
+	t2 = BN_UMULT_HIGH(ta,tb);	\
+	c0 += t1; t2 += (c0<t1)?1:0;	\
+	c1 += t2; c2 += (c1<t2)?1:0;	\
+	}
+
+#define mul_add_c2(a,b,c0,c1,c2) {	\
+	BN_ULONG ta=(a),tb=(b),t0;	\
+	t1 = BN_UMULT_HIGH(ta,tb);	\
+	t0 = ta * tb;			\
+	t2 = t1+t1; c2 += (t2<t1)?1:0;	\
+	t1 = t0+t0; t2 += (t1<t0)?1:0;	\
+	c0 += t1; t2 += (c0<t1)?1:0;	\
+	c1 += t2; c2 += (c1<t2)?1:0;	\
+	}
+#else
+#define mul_add_c(a,b,c0,c1,c2)	do {	\
+	asm ("mulq %3"			\
+		: "=a"(t1),"=d"(t2)	\
+		: "a"(a),"m"(b)		\
+		: "cc");		\
+	asm ("addq %2,%0; adcq %3,%1"	\
+		: "+r"(c0),"+d"(t2)	\
+		: "a"(t1),"g"(0)	\
+		: "cc");		\
+	asm ("addq %2,%0; adcq %3,%1"	\
+		: "+r"(c1),"+r"(c2)	\
+		: "d"(t2),"g"(0)	\
+		: "cc");		\
+	} while (0)
+
+#define sqr_add_c(a,i,c0,c1,c2)	do {	\
+	asm ("mulq %2"			\
+		: "=a"(t1),"=d"(t2)	\
+		: "a"(a[i])		\
+		: "cc");		\
+	asm ("addq %2,%0; adcq %3,%1"	\
+		: "+r"(c0),"+d"(t2)	\
+		: "a"(t1),"g"(0)	\
+		: "cc");		\
+	asm ("addq %2,%0; adcq %3,%1"	\
+		: "+r"(c1),"+r"(c2)	\
+		: "d"(t2),"g"(0)	\
+		: "cc");		\
+	} while (0)
+
+#define mul_add_c2(a,b,c0,c1,c2) do {	\
+	asm ("mulq %3"			\
+		: "=a"(t1),"=d"(t2)	\
+		: "a"(a),"m"(b)		\
+		: "cc");		\
+	asm ("addq %0,%0; adcq %2,%1"	\
+		: "+d"(t2),"+r"(c2)	\
+		: "g"(0)		\
+		: "cc");		\
+	asm ("addq %0,%0; adcq %2,%1"	\
+		: "+a"(t1),"+d"(t2)	\
+		: "g"(0)		\
+		: "cc");		\
+	asm ("addq %2,%0; adcq %3,%1"	\
+		: "+r"(c0),"+d"(t2)	\
+		: "a"(t1),"g"(0)	\
+		: "cc");		\
+	asm ("addq %2,%0; adcq %3,%1"	\
+		: "+r"(c1),"+r"(c2)	\
+		: "d"(t2),"g"(0)	\
+		: "cc");		\
+	} while (0)
+#endif
+
+#define sqr_add_c2(a,i,j,c0,c1,c2)	\
+	mul_add_c2((a)[i],(a)[j],c0,c1,c2)
+
+void bn_mul_comba8(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b)
+	{
+	BN_ULONG bl,bh;
+	BN_ULONG t1,t2;
+	BN_ULONG c1,c2,c3;
+
+	c1=0;
+	c2=0;
+	c3=0;
+	mul_add_c(a[0],b[0],c1,c2,c3);
+	r[0]=c1;
+	c1=0;
+	mul_add_c(a[0],b[1],c2,c3,c1);
+	mul_add_c(a[1],b[0],c2,c3,c1);
+	r[1]=c2;
+	c2=0;
+	mul_add_c(a[2],b[0],c3,c1,c2);
+	mul_add_c(a[1],b[1],c3,c1,c2);
+	mul_add_c(a[0],b[2],c3,c1,c2);
+	r[2]=c3;
+	c3=0;
+	mul_add_c(a[0],b[3],c1,c2,c3);
+	mul_add_c(a[1],b[2],c1,c2,c3);
+	mul_add_c(a[2],b[1],c1,c2,c3);
+	mul_add_c(a[3],b[0],c1,c2,c3);
+	r[3]=c1;
+	c1=0;
+	mul_add_c(a[4],b[0],c2,c3,c1);
+	mul_add_c(a[3],b[1],c2,c3,c1);
+	mul_add_c(a[2],b[2],c2,c3,c1);
+	mul_add_c(a[1],b[3],c2,c3,c1);
+	mul_add_c(a[0],b[4],c2,c3,c1);
+	r[4]=c2;
+	c2=0;
+	mul_add_c(a[0],b[5],c3,c1,c2);
+	mul_add_c(a[1],b[4],c3,c1,c2);
+	mul_add_c(a[2],b[3],c3,c1,c2);
+	mul_add_c(a[3],b[2],c3,c1,c2);
+	mul_add_c(a[4],b[1],c3,c1,c2);
+	mul_add_c(a[5],b[0],c3,c1,c2);
+	r[5]=c3;
+	c3=0;
+	mul_add_c(a[6],b[0],c1,c2,c3);
+	mul_add_c(a[5],b[1],c1,c2,c3);
+	mul_add_c(a[4],b[2],c1,c2,c3);
+	mul_add_c(a[3],b[3],c1,c2,c3);
+	mul_add_c(a[2],b[4],c1,c2,c3);
+	mul_add_c(a[1],b[5],c1,c2,c3);
+	mul_add_c(a[0],b[6],c1,c2,c3);
+	r[6]=c1;
+	c1=0;
+	mul_add_c(a[0],b[7],c2,c3,c1);
+	mul_add_c(a[1],b[6],c2,c3,c1);
+	mul_add_c(a[2],b[5],c2,c3,c1);
+	mul_add_c(a[3],b[4],c2,c3,c1);
+	mul_add_c(a[4],b[3],c2,c3,c1);
+	mul_add_c(a[5],b[2],c2,c3,c1);
+	mul_add_c(a[6],b[1],c2,c3,c1);
+	mul_add_c(a[7],b[0],c2,c3,c1);
+	r[7]=c2;
+	c2=0;
+	mul_add_c(a[7],b[1],c3,c1,c2);
+	mul_add_c(a[6],b[2],c3,c1,c2);
+	mul_add_c(a[5],b[3],c3,c1,c2);
+	mul_add_c(a[4],b[4],c3,c1,c2);
+	mul_add_c(a[3],b[5],c3,c1,c2);
+	mul_add_c(a[2],b[6],c3,c1,c2);
+	mul_add_c(a[1],b[7],c3,c1,c2);
+	r[8]=c3;
+	c3=0;
+	mul_add_c(a[2],b[7],c1,c2,c3);
+	mul_add_c(a[3],b[6],c1,c2,c3);
+	mul_add_c(a[4],b[5],c1,c2,c3);
+	mul_add_c(a[5],b[4],c1,c2,c3);
+	mul_add_c(a[6],b[3],c1,c2,c3);
+	mul_add_c(a[7],b[2],c1,c2,c3);
+	r[9]=c1;
+	c1=0;
+	mul_add_c(a[7],b[3],c2,c3,c1);
+	mul_add_c(a[6],b[4],c2,c3,c1);
+	mul_add_c(a[5],b[5],c2,c3,c1);
+	mul_add_c(a[4],b[6],c2,c3,c1);
+	mul_add_c(a[3],b[7],c2,c3,c1);
+	r[10]=c2;
+	c2=0;
+	mul_add_c(a[4],b[7],c3,c1,c2);
+	mul_add_c(a[5],b[6],c3,c1,c2);
+	mul_add_c(a[6],b[5],c3,c1,c2);
+	mul_add_c(a[7],b[4],c3,c1,c2);
+	r[11]=c3;
+	c3=0;
+	mul_add_c(a[7],b[5],c1,c2,c3);
+	mul_add_c(a[6],b[6],c1,c2,c3);
+	mul_add_c(a[5],b[7],c1,c2,c3);
+	r[12]=c1;
+	c1=0;
+	mul_add_c(a[6],b[7],c2,c3,c1);
+	mul_add_c(a[7],b[6],c2,c3,c1);
+	r[13]=c2;
+	c2=0;
+	mul_add_c(a[7],b[7],c3,c1,c2);
+	r[14]=c3;
+	r[15]=c1;
+	}
+
+void bn_mul_comba4(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b)
+	{
+	BN_ULONG bl,bh;
+	BN_ULONG t1,t2;
+	BN_ULONG c1,c2,c3;
+
+	c1=0;
+	c2=0;
+	c3=0;
+	mul_add_c(a[0],b[0],c1,c2,c3);
+	r[0]=c1;
+	c1=0;
+	mul_add_c(a[0],b[1],c2,c3,c1);
+	mul_add_c(a[1],b[0],c2,c3,c1);
+	r[1]=c2;
+	c2=0;
+	mul_add_c(a[2],b[0],c3,c1,c2);
+	mul_add_c(a[1],b[1],c3,c1,c2);
+	mul_add_c(a[0],b[2],c3,c1,c2);
+	r[2]=c3;
+	c3=0;
+	mul_add_c(a[0],b[3],c1,c2,c3);
+	mul_add_c(a[1],b[2],c1,c2,c3);
+	mul_add_c(a[2],b[1],c1,c2,c3);
+	mul_add_c(a[3],b[0],c1,c2,c3);
+	r[3]=c1;
+	c1=0;
+	mul_add_c(a[3],b[1],c2,c3,c1);
+	mul_add_c(a[2],b[2],c2,c3,c1);
+	mul_add_c(a[1],b[3],c2,c3,c1);
+	r[4]=c2;
+	c2=0;
+	mul_add_c(a[2],b[3],c3,c1,c2);
+	mul_add_c(a[3],b[2],c3,c1,c2);
+	r[5]=c3;
+	c3=0;
+	mul_add_c(a[3],b[3],c1,c2,c3);
+	r[6]=c1;
+	r[7]=c2;
+	}
+
+void bn_sqr_comba8(BN_ULONG *r, BN_ULONG *a)
+	{
+	BN_ULONG bl,bh;
+	BN_ULONG t1,t2;
+	BN_ULONG c1,c2,c3;
+
+	c1=0;
+	c2=0;
+	c3=0;
+	sqr_add_c(a,0,c1,c2,c3);
+	r[0]=c1;
+	c1=0;
+	sqr_add_c2(a,1,0,c2,c3,c1);
+	r[1]=c2;
+	c2=0;
+	sqr_add_c(a,1,c3,c1,c2);
+	sqr_add_c2(a,2,0,c3,c1,c2);
+	r[2]=c3;
+	c3=0;
+	sqr_add_c2(a,3,0,c1,c2,c3);
+	sqr_add_c2(a,2,1,c1,c2,c3);
+	r[3]=c1;
+	c1=0;
+	sqr_add_c(a,2,c2,c3,c1);
+	sqr_add_c2(a,3,1,c2,c3,c1);
+	sqr_add_c2(a,4,0,c2,c3,c1);
+	r[4]=c2;
+	c2=0;
+	sqr_add_c2(a,5,0,c3,c1,c2);
+	sqr_add_c2(a,4,1,c3,c1,c2);
+	sqr_add_c2(a,3,2,c3,c1,c2);
+	r[5]=c3;
+	c3=0;
+	sqr_add_c(a,3,c1,c2,c3);
+	sqr_add_c2(a,4,2,c1,c2,c3);
+	sqr_add_c2(a,5,1,c1,c2,c3);
+	sqr_add_c2(a,6,0,c1,c2,c3);
+	r[6]=c1;
+	c1=0;
+	sqr_add_c2(a,7,0,c2,c3,c1);
+	sqr_add_c2(a,6,1,c2,c3,c1);
+	sqr_add_c2(a,5,2,c2,c3,c1);
+	sqr_add_c2(a,4,3,c2,c3,c1);
+	r[7]=c2;
+	c2=0;
+	sqr_add_c(a,4,c3,c1,c2);
+	sqr_add_c2(a,5,3,c3,c1,c2);
+	sqr_add_c2(a,6,2,c3,c1,c2);
+	sqr_add_c2(a,7,1,c3,c1,c2);
+	r[8]=c3;
+	c3=0;
+	sqr_add_c2(a,7,2,c1,c2,c3);
+	sqr_add_c2(a,6,3,c1,c2,c3);
+	sqr_add_c2(a,5,4,c1,c2,c3);
+	r[9]=c1;
+	c1=0;
+	sqr_add_c(a,5,c2,c3,c1);
+	sqr_add_c2(a,6,4,c2,c3,c1);
+	sqr_add_c2(a,7,3,c2,c3,c1);
+	r[10]=c2;
+	c2=0;
+	sqr_add_c2(a,7,4,c3,c1,c2);
+	sqr_add_c2(a,6,5,c3,c1,c2);
+	r[11]=c3;
+	c3=0;
+	sqr_add_c(a,6,c1,c2,c3);
+	sqr_add_c2(a,7,5,c1,c2,c3);
+	r[12]=c1;
+	c1=0;
+	sqr_add_c2(a,7,6,c2,c3,c1);
+	r[13]=c2;
+	c2=0;
+	sqr_add_c(a,7,c3,c1,c2);
+	r[14]=c3;
+	r[15]=c1;
+	}
+
+void bn_sqr_comba4(BN_ULONG *r, BN_ULONG *a)
+	{
+	BN_ULONG bl,bh;
+	BN_ULONG t1,t2;
+	BN_ULONG c1,c2,c3;
+
+	c1=0;
+	c2=0;
+	c3=0;
+	sqr_add_c(a,0,c1,c2,c3);
+	r[0]=c1;
+	c1=0;
+	sqr_add_c2(a,1,0,c2,c3,c1);
+	r[1]=c2;
+	c2=0;
+	sqr_add_c(a,1,c3,c1,c2);
+	sqr_add_c2(a,2,0,c3,c1,c2);
+	r[2]=c3;
+	c3=0;
+	sqr_add_c2(a,3,0,c1,c2,c3);
+	sqr_add_c2(a,2,1,c1,c2,c3);
+	r[3]=c1;
+	c1=0;
+	sqr_add_c(a,2,c2,c3,c1);
+	sqr_add_c2(a,3,1,c2,c3,c1);
+	r[4]=c2;
+	c2=0;
+	sqr_add_c2(a,3,2,c3,c1,c2);
+	r[5]=c3;
+	c3=0;
+	sqr_add_c(a,3,c1,c2,c3);
+	r[6]=c1;
+	r[7]=c2;
+	}
--- a/crypto/bn/bn_div.c
+++ b/crypto/bn/bn_div.c
@@ -150,6 +150,20 @@ int BN_div(BIGNUM *dv, BIGNUM *rem, const BIGNUM *m, const BIGNUM *d,
 	    q;					\
 	})
 #  define REMAINDER_IS_ALREADY_CALCULATED
+#  elif defined(__x86_64) && defined(SIXTY_FOUR_BIT_LONG)
+   /*
+    * Same story here, but it's 128-bit by 64-bit division. Wow!
+    *					<appro@fy.chalmers.se>
+    */
+#  define bn_div_words(n0,n1,d0)		\
+	({  asm volatile (			\
+		"divq	%4"			\
+		: "=a"(q), "=d"(rem)		\
+		: "a"(n1), "d"(n0), "g"(d0)	\
+		: "cc");			\
+	    q;					\
+	})
+#  define REMAINDER_IS_ALREADY_CALCULATED
 #  endif /* __<cpu> */
 # endif /* __GNUC__ */
 #endif /* OPENSSL_NO_ASM */
@@ -268,6 +282,11 @@ int BN_div(BIGNUM *dv, BIGNUM *rm, const BIGNUM *num, const BIGNUM *divisor,
 			q=(BN_ULONG)(((((BN_ULLONG)n0)<<BN_BITS2)|n1)/d0);
 #else
 			q=bn_div_words(n0,n1,d0);
+#ifdef BN_DEBUG_LEVITTE
+			fprintf(stderr,"DEBUG: bn_div_words(0x%08X,0x%08X,0x%08\
+X) -> 0x%08X\n",
+				n0, n1, d0, q);
+#endif
 #endif

 #ifndef REMAINDER_IS_ALREADY_CALCULATED
@@ -292,11 +311,18 @@ int BN_div(BIGNUM *dv, BIGNUM *rm, const BIGNUM *num, const BIGNUM *divisor,
 			BN_ULONG t2l,t2h,ql,qh;

 			q=bn_div_words(n0,n1,d0);
+#ifdef BN_DEBUG_LEVITTE
+			fprintf(stderr,"DEBUG: bn_div_words(0x%08X,0x%08X,0x%08\
+X) -> 0x%08X\n",
+				n0, n1, d0, q);
+#endif
 #ifndef REMAINDER_IS_ALREADY_CALCULATED
 			rem=(n1-q*d0)&BN_MASK2;
 #endif

-#ifdef BN_UMULT_HIGH
+#if defined(BN_UMULT_LOHI)
+			BN_UMULT_LOHI(t2l,t2h,d1,q);
+#elif defined(BN_UMULT_HIGH)
 			t2l = d1 * q;
 			t2h = BN_UMULT_HIGH(d1,q);
 #else
--- a/crypto/bn/bn_lcl.h
+++ b/crypto/bn/bn_lcl.h
@@ -230,6 +230,21 @@ struct bignum_ctx
 	     : "r"(a), "r"(b));		\
 	ret;			})
 #  endif	/* compiler */
+# elif defined(__x86_64) && defined(SIXTY_FOUR_BIT_LONG)
+#  if defined(__GNUC__)
+#   define BN_UMULT_HIGH(a,b)	({	\
+	register BN_ULONG ret,discard;	\
+	asm ("mulq	%3"		\
+	     : "=a"(discard),"=d"(ret)	\
+	     : "a"(a), "g"(b)		\
+	     : "cc");			\
+	ret;			})
+#   define BN_UMULT_LOHI(low,high,a,b)	\
+	asm ("mulq	%3"		\
+		: "=a"(low),"=d"(high)	\
+		: "a"(a),"g"(b)		\
+		: "cc");
+#  endif
 # endif		/* cpu */
 #endif		/* OPENSSL_NO_ASM */

@@ -337,7 +352,7 @@ struct bignum_ctx

 #define LBITS(a)	((a)&BN_MASK2l)
 #define HBITS(a)	(((a)>>BN_BITS4)&BN_MASK2l)
-#define	L2HBITS(a)	((BN_ULONG)((a)&BN_MASK2l)<<BN_BITS4)
+#define	L2HBITS(a)	(((a)<<BN_BITS4)&BN_MASK2)

 #define LLBITS(a)	((a)&BN_MASKl)
 #define LHBITS(a)	(((a)>>BN_BITS2)&BN_MASKl)
@@ -353,7 +368,7 @@ struct bignum_ctx
 	lt=(bl)*(lt); \
 	m1=(bl)*(ht); \
 	ht =(bh)*(ht); \
-	m=(m+m1)&BN_MASK2; if (m < m1) ht+=L2HBITS(1L); \
+	m=(m+m1)&BN_MASK2; if (m < m1) ht+=L2HBITS((BN_ULONG)1); \
 	ht+=HBITS(m); \
 	m1=L2HBITS(m); \
 	lt=(lt+m1)&BN_MASK2; if (lt < m1) ht++; \
@@ -418,20 +433,19 @@ void bn_sqr_comba4(BN_ULONG *r,const BN_ULONG *a);
 int bn_cmp_words(const BN_ULONG *a,const BN_ULONG *b,int n);
 int bn_cmp_part_words(const BN_ULONG *a, const BN_ULONG *b,
 	int cl, int dl);
+#if 0
+/* bn_mul.c rollback <appro> */
 void bn_mul_recursive(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,int n2,
 	int dna,int dnb,BN_ULONG *t);
 void bn_mul_part_recursive(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,
 	int n,int tna,int tnb,BN_ULONG *t);
+#endif
 void bn_sqr_recursive(BN_ULONG *r,const BN_ULONG *a, int n2, BN_ULONG *t);
 void bn_mul_low_normal(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b, int n);
 void bn_mul_low_recursive(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,int n2,
 	BN_ULONG *t);
 void bn_mul_high(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,BN_ULONG *l,int n2,
 	BN_ULONG *t);
-BN_ULONG bn_add_part_words(BN_ULONG *r, const BN_ULONG *a, const BN_ULONG *b,
-	int cl, int dl);
-BN_ULONG bn_sub_part_words(BN_ULONG *r, const BN_ULONG *a, const BN_ULONG *b,
-	int cl, int dl);

 #ifdef  __cplusplus
 }
--- a/crypto/bn/bn_mul.c
+++ b/crypto/bn/bn_mul.c
@@ -56,325 +56,10 @@
 * [including the GNU Public Licence.]
 */

-#ifndef BN_DEBUG
-# undef NDEBUG /* avoid conflicting definitions */
-# define NDEBUG
-#endif
-
 #include <stdio.h>
-#include <assert.h>
 #include "cryptlib.h"
 #include "bn_lcl.h"

-#if defined(OPENSSL_NO_ASM) || !(defined(__i386) || defined(__i386__)) || defined(__DJGPP__) /* Assembler implementation exists only for x86 */
-/* Here follows specialised variants of bn_add_words() and
-   bn_sub_words().  They have the property performing operations on
-   arrays of different sizes.  The sizes of those arrays is expressed through
-   cl, which is the common length ( basicall, min(len(a),len(b)) ), and dl,
-   which is the delta between the two lengths, calculated as len(a)-len(b).
-   All lengths are the number of BN_ULONGs...  For the operations that require
-   a result array as parameter, it must have the length cl+abs(dl).
-   These functions should probably end up in bn_asm.c as soon as there are
-   assembler counterparts for the systems that use assembler files.  */
-
-BN_ULONG bn_sub_part_words(BN_ULONG *r,
-	const BN_ULONG *a, const BN_ULONG *b,
-	int cl, int dl)
-	{
-	BN_ULONG c, t;
-
-	assert(cl >= 0);
-	c = bn_sub_words(r, a, b, cl);
-
-	if (dl == 0)
-		return c;
-
-	r += cl;
-	a += cl;
-	b += cl;
-
-	if (dl < 0)
-		{
-#ifdef BN_COUNT
-		fprintf(stderr, "  bn_sub_part_words %d + %d (dl < 0, c = %d)\n", cl, dl, c);
-#endif
-		for (;;)
-			{
-			t = b[0];
-			r[0] = (0-t-c)&BN_MASK2;
-			if (t != 0) c=1;
-			if (++dl >= 0) break;
-
-			t = b[1];
-			r[1] = (0-t-c)&BN_MASK2;
-			if (t != 0) c=1;
-			if (++dl >= 0) break;
-
-			t = b[2];
-			r[2] = (0-t-c)&BN_MASK2;
-			if (t != 0) c=1;
-			if (++dl >= 0) break;
-
-			t = b[3];
-			r[3] = (0-t-c)&BN_MASK2;
-			if (t != 0) c=1;
-			if (++dl >= 0) break;
-
-			b += 4;
-			r += 4;
-			}
-		}
-	else
-		{
-		int save_dl = dl;
-#ifdef BN_COUNT
-		fprintf(stderr, "  bn_sub_part_words %d + %d (dl > 0, c = %d)\n", cl, dl, c);
-#endif
-		while(c)
-			{
-			t = a[0];
-			r[0] = (t-c)&BN_MASK2;
-			if (t != 0) c=0;
-			if (--dl <= 0) break;
-
-			t = a[1];
-			r[1] = (t-c)&BN_MASK2;
-			if (t != 0) c=0;
-			if (--dl <= 0) break;
-
-			t = a[2];
-			r[2] = (t-c)&BN_MASK2;
-			if (t != 0) c=0;
-			if (--dl <= 0) break;
-
-			t = a[3];
-			r[3] = (t-c)&BN_MASK2;
-			if (t != 0) c=0;
-			if (--dl <= 0) break;
-
-			save_dl = dl;
-			a += 4;
-			r += 4;
-			}
-		if (dl > 0)
-			{
-#ifdef BN_COUNT
-			fprintf(stderr, "  bn_sub_part_words %d + %d (dl > 0, c == 0)\n", cl, dl);
-#endif
-			if (save_dl > dl)
-				{
-				switch (save_dl - dl)
-					{
-				case 1:
-					r[1] = a[1];
-					if (--dl <= 0) break;
-				case 2:
-					r[2] = a[2];
-					if (--dl <= 0) break;
-				case 3:
-					r[3] = a[3];
-					if (--dl <= 0) break;
-					}
-				a += 4;
-				r += 4;
-				}
-			}
-		if (dl > 0)
-			{
-#ifdef BN_COUNT
-			fprintf(stderr, "  bn_sub_part_words %d + %d (dl > 0, copy)\n", cl, dl);
-#endif
-			for(;;)
-				{
-				r[0] = a[0];
-				if (--dl <= 0) break;
-				r[1] = a[1];
-				if (--dl <= 0) break;
-				r[2] = a[2];
-				if (--dl <= 0) break;
-				r[3] = a[3];
-				if (--dl <= 0) break;
-
-				a += 4;
-				r += 4;
-				}
-			}
-		}
-	return c;
-	}
-#endif
-
-BN_ULONG bn_add_part_words(BN_ULONG *r,
-	const BN_ULONG *a, const BN_ULONG *b,
-	int cl, int dl)
-	{
-	BN_ULONG c, l, t;
-
-	assert(cl >= 0);
-	c = bn_add_words(r, a, b, cl);
-
-	if (dl == 0)
-		return c;
-
-	r += cl;
-	a += cl;
-	b += cl;
-
-	if (dl < 0)
-		{
-		int save_dl = dl;
-#ifdef BN_COUNT
-		fprintf(stderr, "  bn_add_part_words %d + %d (dl < 0, c = %d)\n", cl, dl, c);
-#endif
-		while (c)
-			{
-			l=(c+b[0])&BN_MASK2;
-			c=(l < c);
-			r[0]=l;
-			if (++dl >= 0) break;
-
-			l=(c+b[1])&BN_MASK2;
-			c=(l < c);
-			r[1]=l;
-			if (++dl >= 0) break;
-
-			l=(c+b[2])&BN_MASK2;
-			c=(l < c);
-			r[2]=l;
-			if (++dl >= 0) break;
-
-			l=(c+b[3])&BN_MASK2;
-			c=(l < c);
-			r[3]=l;
-			if (++dl >= 0) break;
-
-			save_dl = dl;
-			b+=4;
-			r+=4;
-			}
-		if (dl < 0)
-			{
-#ifdef BN_COUNT
-			fprintf(stderr, "  bn_add_part_words %d + %d (dl < 0, c == 0)\n", cl, dl);
-#endif
-			if (save_dl < dl)
-				{
-				switch (dl - save_dl)
-					{
-				case 1:
-					r[1] = b[1];
-					if (++dl >= 0) break;
-				case 2:
-					r[2] = b[2];
-					if (++dl >= 0) break;
-				case 3:
-					r[3] = b[3];
-					if (++dl >= 0) break;
-					}
-				b += 4;
-				r += 4;
-				}
-			}
-		if (dl < 0)
-			{
-#ifdef BN_COUNT
-			fprintf(stderr, "  bn_add_part_words %d + %d (dl < 0, copy)\n", cl, dl);
-#endif
-			for(;;)
-				{
-				r[0] = b[0];
-				if (++dl >= 0) break;
-				r[1] = b[1];
-				if (++dl >= 0) break;
-				r[2] = b[2];
-				if (++dl >= 0) break;
-				r[3] = b[3];
-				if (++dl >= 0) break;
-
-				b += 4;
-				r += 4;
-				}
-			}
-		}
-	else
-		{
-		int save_dl = dl;
-#ifdef BN_COUNT
-		fprintf(stderr, "  bn_add_part_words %d + %d (dl > 0)\n", cl, dl);
-#endif
-		while (c)
-			{
-			t=(a[0]+c)&BN_MASK2;
-			c=(t < c);
-			r[0]=t;
-			if (--dl <= 0) break;
-
-			t=(a[1]+c)&BN_MASK2;
-			c=(t < c);
-			r[1]=t;
-			if (--dl <= 0) break;
-
-			t=(a[2]+c)&BN_MASK2;
-			c=(t < c);
-			r[2]=t;
-			if (--dl <= 0) break;
-
-			t=(a[3]+c)&BN_MASK2;
-			c=(t < c);
-			r[3]=t;
-			if (--dl <= 0) break;
-
-			save_dl = dl;
-			a+=4;
-			r+=4;
-			}
-#ifdef BN_COUNT
-		fprintf(stderr, "  bn_add_part_words %d + %d (dl > 0, c == 0)\n", cl, dl);
-#endif
-		if (dl > 0)
-			{
-			if (save_dl > dl)
-				{
-				switch (save_dl - dl)
-					{
-				case 1:
-					r[1] = a[1];
-					if (--dl <= 0) break;
-				case 2:
-					r[2] = a[2];
-					if (--dl <= 0) break;
-				case 3:
-					r[3] = a[3];
-					if (--dl <= 0) break;
-					}
-				a += 4;
-				r += 4;
-				}
-			}
-		if (dl > 0)
-			{
-#ifdef BN_COUNT
-			fprintf(stderr, "  bn_add_part_words %d + %d (dl > 0, copy)\n", cl, dl);
-#endif
-			for(;;)
-				{
-				r[0] = a[0];
-				if (--dl <= 0) break;
-				r[1] = a[1];
-				if (--dl <= 0) break;
-				r[2] = a[2];
-				if (--dl <= 0) break;
-				r[3] = a[3];
-				if (--dl <= 0) break;
-
-				a += 4;
-				r += 4;
-				}
-			}
-		}
-	return c;
-	}
-
 #ifdef BN_RECURSION
 /* Karatsuba recursive multiplication algorithm
 * (cf. Knuth, The Art of Computer Programming, Vol. 2) */
@@ -390,15 +75,14 @@ BN_ULONG bn_add_part_words(BN_ULONG *r,
 * a[1]*b[1]
 */
 void bn_mul_recursive(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n2,
-	int dna, int dnb, BN_ULONG *t)
+	     BN_ULONG *t)
 	{
 	int n=n2/2,c1,c2;
-	int tna=n+dna, tnb=n+dnb;
 	unsigned int neg,zero;
 	BN_ULONG ln,lo,*p;

 # ifdef BN_COUNT
-	fprintf(stderr," bn_mul_recursive %d * %d\n",n2,n2);
+	printf(" bn_mul_recursive %d * %d\n",n2,n2);
 # endif
 # ifdef BN_MUL_COMBA
 #  if 0
@@ -408,40 +92,34 @@ void bn_mul_recursive(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n2,
 		return;
 		}
 #  endif
-	/* Only call bn_mul_comba 8 if n2 == 8 and the
-	 * two arrays are complete [steve]
-	 */
-	if (n2 == 8 && dna == 0 && dnb == 0)
+	if (n2 == 8)
 		{
 		bn_mul_comba8(r,a,b);
 		return; 
 		}
 # endif /* BN_MUL_COMBA */
-	/* Else do normal multiply */
 	if (n2 < BN_MUL_RECURSIVE_SIZE_NORMAL)
 		{
-		bn_mul_normal(r,a,n2+dna,b,n2+dnb);
-		if ((dna + dnb) < 0)
-			memset(&r[2*n2 + dna + dnb], 0,
-				sizeof(BN_ULONG) * -(dna + dnb));
+		/* This should not happen */
+		bn_mul_normal(r,a,n2,b,n2);
 		return;
 		}
 	/* r=(a[0]-a[1])*(b[1]-b[0]) */
-	c1=bn_cmp_part_words(a,&(a[n]),tna,n-tna);
-	c2=bn_cmp_part_words(&(b[n]),b,tnb,tnb-n);
+	c1=bn_cmp_words(a,&(a[n]),n);
+	c2=bn_cmp_words(&(b[n]),b,n);
 	zero=neg=0;
 	switch (c1*3+c2)
 		{
 	case -4:
-		bn_sub_part_words(t,      &(a[n]),a,      tna,tna-n); /* - */
-		bn_sub_part_words(&(t[n]),b,      &(b[n]),tnb,n-tnb); /* - */
+		bn_sub_words(t,      &(a[n]),a,      n); /* - */
+		bn_sub_words(&(t[n]),b,      &(b[n]),n); /* - */
 		break;
 	case -3:
 		zero=1;
 		break;
 	case -2:
-		bn_sub_part_words(t,      &(a[n]),a,      tna,tna-n); /* - */
-		bn_sub_part_words(&(t[n]),&(b[n]),b,      tnb,tnb-n); /* + */
+		bn_sub_words(t,      &(a[n]),a,      n); /* - */
+		bn_sub_words(&(t[n]),&(b[n]),b,      n); /* + */
 		neg=1;
 		break;
 	case -1:
@@ -450,22 +128,21 @@ void bn_mul_recursive(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n2,
 		zero=1;
 		break;
 	case 2:
-		bn_sub_part_words(t,      a,      &(a[n]),tna,n-tna); /* + */
-		bn_sub_part_words(&(t[n]),b,      &(b[n]),tnb,n-tnb); /* - */
+		bn_sub_words(t,      a,      &(a[n]),n); /* + */
+		bn_sub_words(&(t[n]),b,      &(b[n]),n); /* - */
 		neg=1;
 		break;
 	case 3:
 		zero=1;
 		break;
 	case 4:
-		bn_sub_part_words(t,      a,      &(a[n]),tna,n-tna);
-		bn_sub_part_words(&(t[n]),&(b[n]),b,      tnb,tnb-n);
+		bn_sub_words(t,      a,      &(a[n]),n);
+		bn_sub_words(&(t[n]),&(b[n]),b,      n);
 		break;
 		}

 # ifdef BN_MUL_COMBA
-	if (n == 4 && dna == 0 && dnb == 0) /* XXX: bn_mul_comba4 could take
-					       extra args to do this well */
+	if (n == 4)
 		{
 		if (!zero)
 			bn_mul_comba4(&(t[n2]),t,&(t[n]));
@@ -475,9 +152,7 @@ void bn_mul_recursive(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n2,
 		bn_mul_comba4(r,a,b);
 		bn_mul_comba4(&(r[n2]),&(a[n]),&(b[n]));
 		}
-	else if (n == 8 && dna == 0 && dnb == 0) /* XXX: bn_mul_comba8 could
-						    take extra args to do this
-						    well */
+	else if (n == 8)
 		{
 		if (!zero)
 			bn_mul_comba8(&(t[n2]),t,&(t[n]));
@@ -492,11 +167,11 @@ void bn_mul_recursive(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n2,
 		{
 		p= &(t[n2*2]);
 		if (!zero)
-			bn_mul_recursive(&(t[n2]),t,&(t[n]),n,0,0,p);
+			bn_mul_recursive(&(t[n2]),t,&(t[n]),n,p);
 		else
 			memset(&(t[n2]),0,n2*sizeof(BN_ULONG));
-		bn_mul_recursive(r,a,b,n,0,0,p);
-		bn_mul_recursive(&(r[n2]),&(a[n]),&(b[n]),n,dna,dnb,p);
+		bn_mul_recursive(r,a,b,n,p);
+		bn_mul_recursive(&(r[n2]),&(a[n]),&(b[n]),n,p);
 		}

 	/* t[32] holds (a[0]-a[1])*(b[1]-b[0]), c1 is the sign
@@ -545,39 +220,39 @@ void bn_mul_recursive(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n2,

 /* n+tn is the word length
 * t needs to be n*4 is size, as does r */
-void bn_mul_part_recursive(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n,
-	     int tna, int tnb, BN_ULONG *t)
+void bn_mul_part_recursive(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int tn,
+	     int n, BN_ULONG *t)
 	{
 	int i,j,n2=n*2;
 	unsigned int c1,c2,neg,zero;
 	BN_ULONG ln,lo,*p;

 # ifdef BN_COUNT
-	fprintf(stderr," bn_mul_part_recursive (%d+%d) * (%d+%d)\n",
-		tna, n, tnb, n);
+	printf(" bn_mul_part_recursive %d * %d\n",tn+n,tn+n);
 # endif
 	if (n < 8)
 		{
-		bn_mul_normal(r,a,n+tna,b,n+tnb);
+		i=tn+n;
+		bn_mul_normal(r,a,i,b,i);
 		return;
 		}

 	/* r=(a[0]-a[1])*(b[1]-b[0]) */
-	c1=bn_cmp_part_words(a,&(a[n]),tna,n-tna);
-	c2=bn_cmp_part_words(&(b[n]),b,tnb,tnb-n);
+	c1=bn_cmp_words(a,&(a[n]),n);
+	c2=bn_cmp_words(&(b[n]),b,n);
 	zero=neg=0;
 	switch (c1*3+c2)
 		{
 	case -4:
-		bn_sub_part_words(t,      &(a[n]),a,      tna,tna-n); /* - */
-		bn_sub_part_words(&(t[n]),b,      &(b[n]),tnb,n-tnb); /* - */
+		bn_sub_words(t,      &(a[n]),a,      n); /* - */
+		bn_sub_words(&(t[n]),b,      &(b[n]),n); /* - */
 		break;
 	case -3:
 		zero=1;
 		/* break; */
 	case -2:
-		bn_sub_part_words(t,      &(a[n]),a,      tna,tna-n); /* - */
-		bn_sub_part_words(&(t[n]),&(b[n]),b,      tnb,tnb-n); /* + */
+		bn_sub_words(t,      &(a[n]),a,      n); /* - */
+		bn_sub_words(&(t[n]),&(b[n]),b,      n); /* + */
 		neg=1;
 		break;
 	case -1:
@@ -586,16 +261,16 @@ void bn_mul_part_recursive(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n,
 		zero=1;
 		/* break; */
 	case 2:
-		bn_sub_part_words(t,      a,      &(a[n]),tna,n-tna); /* + */
-		bn_sub_part_words(&(t[n]),b,      &(b[n]),tnb,n-tnb); /* - */
+		bn_sub_words(t,      a,      &(a[n]),n); /* + */
+		bn_sub_words(&(t[n]),b,      &(b[n]),n); /* - */
 		neg=1;
 		break;
 	case 3:
 		zero=1;
 		/* break; */
 	case 4:
-		bn_sub_part_words(t,      a,      &(a[n]),tna,n-tna);
-		bn_sub_part_words(&(t[n]),&(b[n]),b,      tnb,tnb-n);
+		bn_sub_words(t,      a,      &(a[n]),n);
+		bn_sub_words(&(t[n]),&(b[n]),b,      n);
 		break;
 		}
 		/* The zero case isn't yet implemented here. The speedup
@@ -614,59 +289,54 @@ void bn_mul_part_recursive(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n,
 		{
 		bn_mul_comba8(&(t[n2]),t,&(t[n]));
 		bn_mul_comba8(r,a,b);
-		bn_mul_normal(&(r[n2]),&(a[n]),tna,&(b[n]),tnb);
-		memset(&(r[n2+tna+tnb]),0,sizeof(BN_ULONG)*(n2-tna-tnb));
+		bn_mul_normal(&(r[n2]),&(a[n]),tn,&(b[n]),tn);
+		memset(&(r[n2+tn*2]),0,sizeof(BN_ULONG)*(n2-tn*2));
 		}
 	else
 		{
 		p= &(t[n2*2]);
-		bn_mul_recursive(&(t[n2]),t,&(t[n]),n,0,0,p);
-		bn_mul_recursive(r,a,b,n,0,0,p);
+		bn_mul_recursive(&(t[n2]),t,&(t[n]),n,p);
+		bn_mul_recursive(r,a,b,n,p);
 		i=n/2;
 		/* If there is only a bottom half to the number,
 		 * just do it */
-		if (tna > tnb)
-			j = tna - i;
-		else
-			j = tnb - i;
+		j=tn-i;
 		if (j == 0)
 			{
-			bn_mul_recursive(&(r[n2]),&(a[n]),&(b[n]),
-				i,tna-i,tnb-i,p);
+			bn_mul_recursive(&(r[n2]),&(a[n]),&(b[n]),i,p);
 			memset(&(r[n2+i*2]),0,sizeof(BN_ULONG)*(n2-i*2));
 			}
 		else if (j > 0) /* eg, n == 16, i == 8 and tn == 11 */
 				{
 				bn_mul_part_recursive(&(r[n2]),&(a[n]),&(b[n]),
-					i,tna-i,tnb-i,p);
-				memset(&(r[n2+tna+tnb]),0,
-					sizeof(BN_ULONG)*(n2-tna-tnb));
+					j,i,p);
+				memset(&(r[n2+tn*2]),0,
+					sizeof(BN_ULONG)*(n2-tn*2));
 				}
 		else /* (j < 0) eg, n == 16, i == 8 and tn == 5 */
 			{
 			memset(&(r[n2]),0,sizeof(BN_ULONG)*n2);
-			if (tna < BN_MUL_RECURSIVE_SIZE_NORMAL
-				&& tnb < BN_MUL_RECURSIVE_SIZE_NORMAL)
+			if (tn < BN_MUL_RECURSIVE_SIZE_NORMAL)
 				{
-				bn_mul_normal(&(r[n2]),&(a[n]),tna,&(b[n]),tnb);
+				bn_mul_normal(&(r[n2]),&(a[n]),tn,&(b[n]),tn);
 				}
 			else
 				{
 				for (;;)
 					{
 					i/=2;
-					if (i < tna && i < tnb)
+					if (i < tn)
 						{
 						bn_mul_part_recursive(&(r[n2]),
 							&(a[n]),&(b[n]),
-							i,tna-i,tnb-i,p);
+							tn-i,i,p);
 						break;
 						}
-					else if (i <= tna && i <= tnb)
+					else if (i == tn)
 						{
 						bn_mul_recursive(&(r[n2]),
 							&(a[n]),&(b[n]),
-							i,tna-i,tnb-i,p);
+							i,p);
 						break;
 						}
 					}
@@ -727,10 +397,10 @@ void bn_mul_low_recursive(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n2,
 	int n=n2/2;

 # ifdef BN_COUNT
-	fprintf(stderr," bn_mul_low_recursive %d * %d\n",n2,n2);
+	printf(" bn_mul_low_recursive %d * %d\n",n2,n2);
 # endif

-	bn_mul_recursive(r,a,b,n,0,0,&(t[0]));
+	bn_mul_recursive(r,a,b,n,&(t[0]));
 	if (n >= BN_MUL_LOW_RECURSIVE_SIZE_NORMAL)
 		{
 		bn_mul_low_recursive(&(t[0]),&(a[0]),&(b[n]),n,&(t[n2]));
@@ -761,7 +431,7 @@ void bn_mul_high(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, BN_ULONG *l, int n2,
 	BN_ULONG ll,lc,*lp,*mp;

 # ifdef BN_COUNT
-	fprintf(stderr," bn_mul_high %d * %d\n",n2,n2);
+	printf(" bn_mul_high %d * %d\n",n2,n2);
 # endif
 	n=n2/2;

@@ -814,8 +484,8 @@ void bn_mul_high(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, BN_ULONG *l, int n2,
 	else
 # endif
 		{
-		bn_mul_recursive(&(t[0]),&(r[0]),&(r[n]),n,0,0,&(t[n2]));
-		bn_mul_recursive(r,&(a[n]),&(b[n]),n,0,0,&(t[n2]));
+		bn_mul_recursive(&(t[0]),&(r[0]),&(r[n]),n,&(t[n2]));
+		bn_mul_recursive(r,&(a[n]),&(b[n]),n,&(t[n2]));
 		}

 	/* s0 == low(al*bl)
@@ -940,19 +610,19 @@ void bn_mul_high(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, BN_ULONG *l, int n2,

 int BN_mul(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, BN_CTX *ctx)
 	{
-	int ret=0;
 	int top,al,bl;
 	BIGNUM *rr;
+	int ret = 0;
 #if defined(BN_MUL_COMBA) || defined(BN_RECURSION)
 	int i;
 #endif
 #ifdef BN_RECURSION
-	BIGNUM *t=NULL;
-	int j=0,k;
+	BIGNUM *t;
+	int j,k;
 #endif

 #ifdef BN_COUNT
-	fprintf(stderr,"BN_mul %d * %d\n",a->top,b->top);
+	printf("BN_mul %d * %d\n",a->top,b->top);
 #endif

 	bn_check_top(a);
@@ -1005,55 +675,21 @@ int BN_mul(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, BN_CTX *ctx)
 #ifdef BN_RECURSION
 	if ((al >= BN_MULL_SIZE_NORMAL) && (bl >= BN_MULL_SIZE_NORMAL))
 		{
-		if (i >= -1 && i <= 1)
+		if (i == 1 && !BN_get_flags(b,BN_FLG_STATIC_DATA) && bl<b->dmax)
 			{
-			int sav_j =0;
-			/* Find out the power of two lower or equal
-			   to the longest of the two numbers */
-			if (i >= 0)
-				{
-				j = BN_num_bits_word((BN_ULONG)al);
-				}
-			if (i == -1)
-				{
-				j = BN_num_bits_word((BN_ULONG)bl);
-				}
-			sav_j = j;
-			j = 1<<(j-1);
-			assert(j <= al || j <= bl);
-			k = j+j;
-			t = BN_CTX_get(ctx);
-			if (al > j || bl > j)
-				{
-				bn_wexpand(t,k*4);
-				bn_wexpand(rr,k*4);
-				bn_mul_part_recursive(rr->d,a->d,b->d,
-					j,al-j,bl-j,t->d);
-				}
-			else	/* al <= j || bl <= j */
-				{
-				bn_wexpand(t,k*2);
-				bn_wexpand(rr,k*2);
-				bn_mul_recursive(rr->d,a->d,b->d,
-					j,al-j,bl-j,t->d);
-				}
-			rr->top=top;
-			goto end;
-			}
-#if 0
-		if (i == 1 && !BN_get_flags(b,BN_FLG_STATIC_DATA))
-			{
-			BIGNUM *tmp_bn = (BIGNUM *)b;
-			if (bn_wexpand(tmp_bn,al) == NULL) goto err;
-			tmp_bn->d[bl]=0;
+#if 0	/* tribute to const-ification, bl<b->dmax above covers for this */
+			if (bn_wexpand(b,al) == NULL) goto err;
+#endif
+			b->d[bl]=0;
 			bl++;
 			i--;
 			}
-		else if (i == -1 && !BN_get_flags(a,BN_FLG_STATIC_DATA))
+		else if (i == -1 && !BN_get_flags(a,BN_FLG_STATIC_DATA) && al<a->dmax)
 			{
-			BIGNUM *tmp_bn = (BIGNUM *)a;
-			if (bn_wexpand(tmp_bn,bl) == NULL) goto err;
-			tmp_bn->d[al]=0;
+#if 0	/* tribute to const-ification, al<a->dmax above covers for this */
+			if (bn_wexpand(a,bl) == NULL) goto err;
+#endif
+			a->d[al]=0;
 			al++;
 			i++;
 			}
@@ -1070,17 +706,26 @@ int BN_mul(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, BN_CTX *ctx)
 				if (bn_wexpand(t,k*2) == NULL) goto err;
 				if (bn_wexpand(rr,k*2) == NULL) goto err;
 				bn_mul_recursive(rr->d,a->d,b->d,al,t->d);
+				rr->top=top;
+				goto end;
 				}
+#if 0	/* tribute to const-ification, rsa/dsa performance is not affected */
 			else
 				{
-				if (bn_wexpand(t,k*4) == NULL) goto err;
-				if (bn_wexpand(rr,k*4) == NULL) goto err;
+				if (bn_wexpand(a,k) == NULL ) goto err;
+				if (bn_wexpand(b,k) == NULL ) goto err;
+				if (bn_wexpand(t,k*4) == NULL ) goto err;
+				if (bn_wexpand(rr,k*4) == NULL ) goto err;
+				for (i=a->top; i<k; i++)
+					a->d[i]=0;
+				for (i=b->top; i<k; i++)
+					b->d[i]=0;
 				bn_mul_part_recursive(rr->d,a->d,b->d,al-j,j,t->d);
 				}
 			rr->top=top;
 			goto end;
-			}
 #endif
+			}
 		}
 #endif /* BN_RECURSION */
 	if (bn_wexpand(rr,top) == NULL) goto err;
@@ -1103,7 +748,7 @@ void bn_mul_normal(BN_ULONG *r, BN_ULONG *a, int na, BN_ULONG *b, int nb)
 	BN_ULONG *rr;

 #ifdef BN_COUNT
-	fprintf(stderr," bn_mul_normal %d * %d\n",na,nb);
+	printf(" bn_mul_normal %d * %d\n",na,nb);
 #endif

 	if (na < nb)
@@ -1116,13 +761,7 @@ void bn_mul_normal(BN_ULONG *r, BN_ULONG *a, int na, BN_ULONG *b, int nb)

 		}
 	rr= &(r[na]);
-	if (nb <= 0)
-		{
-		(void)bn_mul_words(r,a,na,0);
-		return;
-		}
-	else
-		rr[0]=bn_mul_words(r,a,na,b[0]);
+	rr[0]=bn_mul_words(r,a,na,b[0]);

 	for (;;)
 		{
@@ -1143,7 +782,7 @@ void bn_mul_normal(BN_ULONG *r, BN_ULONG *a, int na, BN_ULONG *b, int nb)
 void bn_mul_low_normal(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n)
 	{
 #ifdef BN_COUNT
-	fprintf(stderr," bn_mul_low_normal %d * %d\n",n,n);
+	printf(" bn_mul_low_normal %d * %d\n",n,n);
 #endif
 	bn_mul_words(r,a,n,b[0]);

--- a/crypto/bn/bn_prime.c
+++ b/crypto/bn/bn_prime.c
@@ -140,6 +140,7 @@ BIGNUM *BN_generate_prime(BIGNUM *ret, int bits, int safe,
 	BN_CTX *ctx;
 	int checks = BN_prime_checks_for_size(bits);

+	BN_init(&t);
 	ctx=BN_CTX_new();
 	if (ctx == NULL) goto err;
 	if (ret == NULL)
@@ -148,7 +149,6 @@ BIGNUM *BN_generate_prime(BIGNUM *ret, int bits, int safe,
 		}
 	else
 		rnd=ret;
-	BN_init(&t);
 loop: 
 	/* make a random number and set the top and bottom bits */
 	if (add == NULL)
--- a/crypto/cast/Makefile.ssl
+++ b/crypto/cast/Makefile.ssl
@@ -52,14 +52,8 @@ lib:	$(LIBOBJ)
 	@touch lib

 # elf
-asm/cx86-elf.o: asm/cx86unix.cpp
-	$(CPP) -DELF -x c asm/cx86unix.cpp | as -o asm/cx86-elf.o
-
-# solaris
-asm/cx86-sol.o: asm/cx86unix.cpp
-	$(CC) -E -DSOL asm/cx86unix.cpp | sed 's/^#.*//' > asm/cx86-sol.s
-	as -o asm/cx86-sol.o asm/cx86-sol.s
-	rm -f asm/cx86-sol.s
+asm/cx86-elf.s: asm/cast-586.pl ../perlasm/x86asm.pl ../perlasm/cbc.pl
+	(cd asm; $(PERL) cast-586.pl elf $(CLAGS) $(PROCESSOR) > cx86-elf.s)

 # a.out
 asm/cx86-out.o: asm/cx86unix.cpp
@@ -104,7 +98,7 @@ dclean:
 	mv -f Makefile.new $(MAKEFILE)

 clean:
-	rm -f asm/cx86unix.cpp *.o asm/*.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
+	rm -f asm/cx86unix.cpp asm/*-elf.* *.o asm/*.o *.obj lib tags core .pure .nfs* *.old *.bak fluff

 # DO NOT DELETE THIS LINE -- make depend depends on it.

--- a/crypto/conf/conf_mall.c
+++ b/crypto/conf/conf_mall.c
@@ -63,7 +63,9 @@
 #include <openssl/dso.h>
 #include <openssl/x509.h>
 #include <openssl/asn1.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
+#endif

 /* Load all OpenSSL builtin modules */

@@ -71,6 +73,8 @@ void OPENSSL_load_builtin_modules(void)
 	{
 	/* Add builtin modules here */
 	ASN1_add_oid_module();
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE_add_conf_module();
+#endif
 	}

--- a/crypto/conf/conf_sap.c
+++ b/crypto/conf/conf_sap.c
@@ -63,7 +63,9 @@
 #include <openssl/dso.h>
 #include <openssl/x509.h>
 #include <openssl/asn1.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
+#endif

 /* This is the automatic configuration loader: it is called automatically by
 * OpenSSL when any of a number of standard initialisation functions are called,
@@ -78,8 +80,10 @@ void OPENSSL_config(const char *config_name)
 		return;

 	OPENSSL_load_builtin_modules();
+#ifndef OPENSSL_NO_ENGINE
 	/* Need to load ENGINEs */
 	ENGINE_load_builtin_engines();
+#endif
 	/* Add others here? */


--- a/crypto/cryptlib.c
+++ b/crypto/cryptlib.c
@@ -104,7 +104,8 @@ static const char* lock_names[CRYPTO_NUM_LOCKS] =
 	"dynlock",
 	"engine",
 	"ui",
-#if CRYPTO_NUM_LOCKS != 32
+	"hwcrhk",		/* This is a HACK which will disappear in 0.9.8 */
+#if CRYPTO_NUM_LOCKS != 33
 # error "Inconsistency between crypto.h and cryptlib.c"
 #endif
 	};
@@ -207,10 +208,18 @@ int CRYPTO_get_new_dynlockid(void)
 	i=sk_CRYPTO_dynlock_find(dyn_locks,NULL);
 	/* If there was none, push, thereby creating a new one */
 	if (i == -1)
-		i=sk_CRYPTO_dynlock_push(dyn_locks,pointer);
+		/* Since sk_push() returns the number of items on the
+		   stack, not the location of the pushed item, we need
+		   to transform the returned number into a position,
+		   by decreasing it.  */
+		i=sk_CRYPTO_dynlock_push(dyn_locks,pointer) - 1;
+	else
+		/* If we found a place with a NULL pointer, put our pointer
+		   in it.  */
+		sk_CRYPTO_dynlock_set(dyn_locks,i,pointer);
 	CRYPTO_w_unlock(CRYPTO_LOCK_DYNLOCK);

-	if (!i)
+	if (i == -1)
 		{
 		dynlock_destroy_callback(pointer->data,__FILE__,__LINE__);
 		OPENSSL_free(pointer);
@@ -402,15 +411,17 @@ void CRYPTO_lock(int mode, int type, const char *file, int line)
 #endif
 	if (type < 0)
 		{
-		struct CRYPTO_dynlock_value *pointer
-			= CRYPTO_get_dynlock_value(type);
-
-		if (pointer && dynlock_lock_callback)
+		if (dynlock_lock_callback != NULL)
 			{
-			dynlock_lock_callback(mode, pointer, file, line);
-			}
+			struct CRYPTO_dynlock_value *pointer
+				= CRYPTO_get_dynlock_value(type);

-		CRYPTO_destroy_dynlockid(type);
+			OPENSSL_assert(pointer != NULL);
+
+			dynlock_lock_callback(mode, pointer, file, line);
+
+			CRYPTO_destroy_dynlockid(type);
+			}
 		}
 	else
 		if (locking_callback != NULL)
--- a/crypto/crypto.h
+++ b/crypto/crypto.h
@@ -127,7 +127,8 @@ extern "C" {
 #define CRYPTO_LOCK_DYNLOCK		29
 #define CRYPTO_LOCK_ENGINE		30
 #define CRYPTO_LOCK_UI			31
-#define CRYPTO_NUM_LOCKS		32
+#define CRYPTO_LOCK_HWCRHK		32 /* This is a HACK which will disappear in 0.9.8 */
+#define CRYPTO_NUM_LOCKS		33

 #define CRYPTO_LOCK		1
 #define CRYPTO_UNLOCK		2
--- a/crypto/des/Makefile.ssl
+++ b/crypto/des/Makefile.ssl
@@ -66,22 +66,11 @@ des: des.o cbc3_enc.o lib
 	$(CC) $(CFLAGS) -o des des.o cbc3_enc.o $(LIB)

 # elf
-asm/dx86-elf.o: asm/dx86unix.cpp
-	$(CPP) -DELF -x c asm/dx86unix.cpp | as -o asm/dx86-elf.o
+asm/dx86-elf.s:	asm/des-586.pl ../perlasm/x86asm.pl ../perlasm/cbc.pl
+	(cd asm; $(PERL) des-586.pl elf $(CFLAGS) > dx86-elf.s)

-asm/yx86-elf.o: asm/yx86unix.cpp
-	$(CPP) -DELF -x c asm/yx86unix.cpp | as -o asm/yx86-elf.o
-
-# solaris
-asm/dx86-sol.o: asm/dx86unix.cpp
-	$(CC) -E -DSOL asm/dx86unix.cpp | sed 's/^#.*//' > asm/dx86-sol.s
-	as -o asm/dx86-sol.o asm/dx86-sol.s
-	rm -f asm/dx86-sol.s
-
-asm/yx86-sol.o: asm/yx86unix.cpp
-	$(CC) -E -DSOL asm/yx86unix.cpp | sed 's/^#.*//' > asm/yx86-sol.s
-	as -o asm/yx86-sol.o asm/yx86-sol.s
-	rm -f asm/yx86-sol.s
+asm/yx86-elf.s:	asm/crypt586.pl ../perlasm/x86asm.pl ../perlasm/cbc.pl
+	(cd asm; $(PERL) crypt586.pl elf $(CFLAGS) > yx86-elf.s)

 # a.out
 asm/dx86-out.o: asm/dx86unix.cpp
@@ -137,7 +126,7 @@ dclean:
 	mv -f Makefile.new $(MAKEFILE)

 clean:
-	rm -f asm/dx86unix.cpp asm/yx86unix.cpp *.o asm/*.o *.obj des lib tags core .pure .nfs* *.old *.bak fluff
+	rm -f asm/dx86unix.cpp asm/yx86unix.cpp asm/*-elf.* *.o asm/*.o *.obj des lib tags core .pure .nfs* *.old *.bak fluff

 # DO NOT DELETE THIS LINE -- make depend depends on it.

--- a/crypto/des/asm/.cvsignore
+++ b/crypto/des/asm/.cvsignore
@@ -1,2 +1,5 @@
 dx86unix.cpp
 yx86unix.cpp
+des_enc-sparc.S
+dx86-elf.s
+yx86-elf.s
--- a/crypto/des/asm/crypt586.pl
+++ b/crypto/des/asm/crypt586.pl
@@ -26,11 +26,18 @@ sub fcrypt_body

 	&comment("");
 	&comment("Load the 2 words");
-	$ks="ebp";
+	$trans="ebp";

 	&xor(	$L,	$L);
 	&xor(	$R,	$R);
-	&mov($ks,&wparam(1));
+
+	# PIC-ification:-)
+	&picmeup("edx","DES_SPtrans");
+	#if ($cpp)	{ &picmeup("edx","DES_SPtrans");   }
+	#else		{ &lea("edx",&DWP("DES_SPtrans")); }
+	&push("edx");	# becomes &swtmp(1)
+	#
+	&mov($trans,&wparam(1)); # reloaded with DES_SPtrans in D_ENCRYPT

 	&push(&DWC(25)); # add a variable

@@ -39,11 +46,11 @@ sub fcrypt_body
 		{
 		&comment("");
 		&comment("Round $i");
-		&D_ENCRYPT($i,$L,$R,$i*2,$ks,"DES_SPtrans","eax","ebx","ecx","edx");
+		&D_ENCRYPT($i,$L,$R,$i*2,$trans,"eax","ebx","ecx","edx");

 		&comment("");
 		&comment("Round ".sprintf("%d",$i+1));
-		&D_ENCRYPT($i+1,$R,$L,($i+1)*2,$ks,"DES_SPtrans","eax","ebx","ecx","edx");
+		&D_ENCRYPT($i+1,$R,$L,($i+1)*2,$trans,"eax","ebx","ecx","edx");
 		}
 	 &mov("ebx",	&swtmp(0));
 	&mov("eax",	$L);
@@ -61,14 +68,14 @@ sub fcrypt_body
 	&mov(&DWP(0,"edx","",0),"eax");
 	&mov(&DWP(4,"edx","",0),$L);

-	&pop("ecx");	# remove variable
+	&add("esp",8);	# remove variables

 	&function_end($name);
 	}

 sub D_ENCRYPT
 	{
-	local($r,$L,$R,$S,$ks,$desSP,$u,$tmp1,$tmp2,$t)=@_;
+	local($r,$L,$R,$S,$trans,$u,$tmp1,$tmp2,$t)=@_;

 	&mov(	$u,		&wparam(2));			# 2
 	&mov(	$t,		$R);
@@ -85,9 +92,9 @@ sub D_ENCRYPT
 	&shl(	$tmp2,		16); 				# 1
 	&xor(	$u,		$tmp1);				# 2
 	&xor(	$t,		$tmp2);				# 2
-	&mov(	$tmp1,		&DWP(&n2a($S*4),$ks,"",0));	# 2
+	&mov(	$tmp1,		&DWP(&n2a($S*4),$trans,"",0));	# 2
 	&xor(	$u,		$tmp1);
-	&mov(	$tmp2,		&DWP(&n2a(($S+1)*4),$ks,"",0));	# 2
+	&mov(	$tmp2,		&DWP(&n2a(($S+1)*4),$trans,"",0));	# 2
 	&xor(	$u,		$R);
 	&xor(	$t,		$R);
 	&xor(	$t,		$tmp2);
@@ -99,31 +106,28 @@ sub D_ENCRYPT
 	&movb(	&LB($tmp1),	&LB($u)	);
 	&movb(	&LB($tmp2),	&HB($u)	);
 	&rotr(	$t,		4		);
-	&mov(	$ks,		&DWP("      $desSP",$tmp1,"",0));
+	&mov(	$trans,		&swtmp(1));
+	&xor(	$L,		&DWP("     ",$trans,$tmp1,0));
 	&movb(	&LB($tmp1),	&LB($t)	);
-	&xor(	$L,		$ks);
-	&mov(	$ks,		&DWP("0x200+$desSP",$tmp2,"",0));
-	&xor(	$L,		$ks);
+	&xor(	$L,		&DWP("0x200",$trans,$tmp2,0));
 	&movb(	&LB($tmp2),	&HB($t)	);
 	&shr(	$u,		16);
-	&mov(	$ks,		&DWP("0x100+$desSP",$tmp1,"",0));
-	&xor(	$L,		$ks); 
+	&xor(	$L,		&DWP("0x100",$trans,$tmp1,0));
 	&movb(	&LB($tmp1),	&HB($u)	);
 	&shr(	$t,		16);
-	&mov(	$ks,		&DWP("0x300+$desSP",$tmp2,"",0));
-	&xor(	$L,		$ks);
-	&mov(	$ks,		&wparam(1));
+	&xor(	$L,		&DWP("0x300",$trans,$tmp2,0));
 	&movb(	&LB($tmp2),	&HB($t)	);
 	&and(	$u,		"0xff"	);
 	&and(	$t,		"0xff"	);
-	&mov(	$tmp1,		&DWP("0x600+$desSP",$tmp1,"",0));
+	&mov(	$tmp1,		&DWP("0x600",$trans,$tmp1,0));
 	&xor(	$L,		$tmp1);
-	&mov(	$tmp1,		&DWP("0x700+$desSP",$tmp2,"",0));
+	&mov(	$tmp1,		&DWP("0x700",$trans,$tmp2,0));
 	&xor(	$L,		$tmp1);
-	&mov(	$tmp1,		&DWP("0x400+$desSP",$u,"",0));
+	&mov(	$tmp1,		&DWP("0x400",$trans,$u,0));
 	&xor(	$L,		$tmp1);
-	&mov(	$tmp1,		&DWP("0x500+$desSP",$t,"",0));
+	&mov(	$tmp1,		&DWP("0x500",$trans,$t,0));
 	&xor(	$L,		$tmp1);
+	&mov(	$trans,		&wparam(1));
 	}

 sub n2a
--- a/crypto/des/asm/des-586.pl
+++ b/crypto/des/asm/des-586.pl
@@ -40,7 +40,7 @@ sub DES_encrypt

 	&comment("");
 	&comment("Load the 2 words");
-	$ks="ebp";
+	$trans="ebp";

 	if ($do_ip)
 		{
@@ -72,7 +72,12 @@ sub DES_encrypt
 		&rotl($L,3);
 		}

-	&mov(	$ks,		&wparam(1)	);
+	# PIC-ification:-)
+	&picmeup($trans,"DES_SPtrans");
+	#if ($cpp)	{ &picmeup($trans,"DES_SPtrans");   }
+	#else		{ &lea($trans,&DWP("DES_SPtrans")); }
+
+	&mov(	"ecx",	&wparam(1)	);
 	&cmp("ebx","0");
 	&je(&label("start_decrypt"));

@@ -80,11 +85,11 @@ sub DES_encrypt
 		{
 		&comment("");
 		&comment("Round $i");
-		&D_ENCRYPT($i,$L,$R,$i*2,$ks,"DES_SPtrans","eax","ebx","ecx","edx");
+		&D_ENCRYPT($i,$L,$R,$i*2,$trans,"eax","ebx","ecx","edx");

 		&comment("");
 		&comment("Round ".sprintf("%d",$i+1));
-		&D_ENCRYPT($i+1,$R,$L,($i+1)*2,$ks,"DES_SPtrans","eax","ebx","ecx","edx");
+		&D_ENCRYPT($i+1,$R,$L,($i+1)*2,$trans,"eax","ebx","ecx","edx");
 		}
 	&jmp(&label("end"));

@@ -94,10 +99,10 @@ sub DES_encrypt
 		{
 		&comment("");
 		&comment("Round $i");
-		&D_ENCRYPT(15-$i,$L,$R,$i*2,$ks,"DES_SPtrans","eax","ebx","ecx","edx");
+		&D_ENCRYPT(15-$i,$L,$R,$i*2,$trans,"eax","ebx","ecx","edx");
 		&comment("");
 		&comment("Round ".sprintf("%d",$i-1));
-		&D_ENCRYPT(15-$i+1,$R,$L,($i-1)*2,$ks,"DES_SPtrans","eax","ebx","ecx","edx");
+		&D_ENCRYPT(15-$i+1,$R,$L,($i-1)*2,$trans,"eax","ebx","ecx","edx");
 		}

 	&set_label("end");
@@ -134,43 +139,36 @@ sub DES_encrypt

 sub D_ENCRYPT
 	{
-	local($r,$L,$R,$S,$ks,$desSP,$u,$tmp1,$tmp2,$t)=@_;
+	local($r,$L,$R,$S,$trans,$u,$tmp1,$tmp2,$t)=@_;

-	 &mov(	$u,		&DWP(&n2a($S*4),$ks,"",0));
+	 &mov(	$u,		&DWP(&n2a($S*4),$tmp2,"",0));
 	&xor(	$tmp1,		$tmp1);
-	 &mov(	$t,		&DWP(&n2a(($S+1)*4),$ks,"",0));
+	 &mov(	$t,		&DWP(&n2a(($S+1)*4),$tmp2,"",0));
 	&xor(	$u,		$R);
+	&xor(	$tmp2,		$tmp2);
 	 &xor(	$t,		$R);
 	&and(	$u,		"0xfcfcfcfc"	);
 	 &and(	$t,		"0xcfcfcfcf"	);
 	&movb(	&LB($tmp1),	&LB($u)	);
 	 &movb(	&LB($tmp2),	&HB($u)	);
 	&rotr(	$t,		4		);
-	&mov(	$ks,		&DWP("      $desSP",$tmp1,"",0));
+	&xor(	$L,		&DWP("     ",$trans,$tmp1,0));
 	 &movb(	&LB($tmp1),	&LB($t)	);
-	&xor(	$L,		$ks);
-	 &mov(	$ks,		&DWP("0x200+$desSP",$tmp2,"",0));
-	&xor(	$L,		$ks); ######
+	 &xor(	$L,		&DWP("0x200",$trans,$tmp2,0));
 	 &movb(	&LB($tmp2),	&HB($t)	);
 	&shr(	$u,		16);
-	 &mov(	$ks,		&DWP("0x100+$desSP",$tmp1,"",0));
-	&xor(	$L,		$ks); ######
+	 &xor(	$L,		&DWP("0x100",$trans,$tmp1,0));
 	 &movb(	&LB($tmp1),	&HB($u)	);
 	&shr(	$t,		16);
-	 &mov(	$ks,		&DWP("0x300+$desSP",$tmp2,"",0));
-	&xor(	$L,		$ks);
-	 &mov(	$ks,		&wparam(1)	);
+	 &xor(	$L,		&DWP("0x300",$trans,$tmp2,0));
 	&movb(	&LB($tmp2),	&HB($t)	);
 	 &and(	$u,		"0xff"	);
 	&and(	$t,		"0xff"	);
-	 &mov(	$tmp1,		&DWP("0x600+$desSP",$tmp1,"",0));
-	&xor(	$L,		$tmp1);
-	 &mov(	$tmp1,		&DWP("0x700+$desSP",$tmp2,"",0));
-	&xor(	$L,		$tmp1);
-	 &mov(	$tmp1,		&DWP("0x400+$desSP",$u,"",0));
-	&xor(	$L,		$tmp1);
-	 &mov(	$tmp1,		&DWP("0x500+$desSP",$t,"",0));
-	&xor(	$L,		$tmp1);
+	 &xor(	$L,		&DWP("0x600",$trans,$tmp1,0));
+	 &xor(	$L,		&DWP("0x700",$trans,$tmp2,0));
+	&mov(	$tmp2,		&wparam(1)	);
+	 &xor(	$L,		&DWP("0x400",$trans,$u,0));
+	 &xor(	$L,		&DWP("0x500",$trans,$t,0));
 	}

 sub n2a
--- a/crypto/des/cbc_cksm.c
+++ b/crypto/des/cbc_cksm.c
@@ -93,5 +93,14 @@ DES_LONG DES_cbc_cksum(const unsigned char *in, DES_cblock *output,
 		l2c(tout1,out);
 		}
 	tout0=tin0=tin1=tin[0]=tin[1]=0;
+	/*
+	  Transform the data in tout1 so that it will
+	  match the return value that the MIT Kerberos
+	  mit_des_cbc_cksum API returns.
+	*/
+	tout1 = ((tout1 >> 24L) & 0x000000FF)
+	      | ((tout1 >> 8L)  & 0x0000FF00)
+	      | ((tout1 << 8L)  & 0x00FF0000)
+	      | ((tout1 << 24L) & 0xFF000000);
 	return(tout1);
 	}
--- a/crypto/des/des.h
+++ b/crypto/des/des.h
@@ -56,8 +56,8 @@
 * [including the GNU Public Licence.]
 */

-#ifndef HEADER_DES_H
-#define HEADER_DES_H
+#ifndef HEADER_NEW_DES_H
+#define HEADER_NEW_DES_H

 #ifdef OPENSSL_NO_DES
 #error DES is disabled.
--- a/crypto/des/des_locl.h
+++ b/crypto/des/des_locl.h
@@ -162,7 +162,18 @@

 #if defined(OPENSSL_SYS_WIN32) && defined(_MSC_VER)
 #define	ROTATE(a,n)	(_lrotr(a,n))
-#else
+#elif defined(__GNUC__) && __GNUC__>=2 && !defined(__STRICT_ANSI__) && !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_NO_INLINE_ASM) && !defined(PEDANTIC)
+# if defined(__i386) || defined(__i386__) || defined(__x86_64) || defined(__x86_64__)
+#  define ROTATE(a,n)	({ register unsigned int ret;	\
+				asm ("rorl %1,%0"	\
+					: "=r"(ret)	\
+					: "I"(n),"0"(a)	\
+					: "cc");	\
+			   ret;				\
+			})
+# endif
+#endif
+#ifndef ROTATE
 #define	ROTATE(a,n)	(((a)>>(n))+((a)<<(32-(n))))
 #endif

--- a/crypto/des/des_old.h
+++ b/crypto/des/des_old.h
@@ -88,14 +88,14 @@
 *
 */

-#ifndef HEADER_DES_OLD_H
-#define HEADER_DES_OLD_H
+#ifndef HEADER_DES_H
+#define HEADER_DES_H

 #ifdef OPENSSL_NO_DES
 #error DES is disabled.
 #endif

-#ifndef HEADER_DES_H
+#ifndef HEADER_NEW_DES_H
 #error You must include des.h, not des_old.h directly.
 #endif

--- a/crypto/des/destest.c
+++ b/crypto/des/destest.c
@@ -320,7 +320,11 @@ static unsigned char ofb_cipher[24]=
 	0x3d,0x6d,0x5b,0xe3,0x25,0x5a,0xf8,0xc3
 	};

+#if 0
 static DES_LONG cbc_cksum_ret=0xB462FEF7L;
+#else
+static DES_LONG cbc_cksum_ret=0xF7FE62B4L;
+#endif
 static unsigned char cbc_cksum_data[8]={0x1D,0x26,0x93,0x97,0xf7,0xfe,0x62,0xb4};

 static char *pt(unsigned char *p);
--- a/crypto/dh/dh_key.c
+++ b/crypto/dh/dh_key.c
@@ -61,7 +61,9 @@
 #include <openssl/bn.h>
 #include <openssl/rand.h>
 #include <openssl/dh.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
+#endif

 static int generate_key(DH *dh);
 static int compute_key(unsigned char *key, const BIGNUM *pub_key, DH *dh);
--- a/crypto/dh/dh_lib.c
+++ b/crypto/dh/dh_lib.c
@@ -60,7 +60,9 @@
 #include "cryptlib.h"
 #include <openssl/bn.h>
 #include <openssl/dh.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
+#endif

 const char *DH_version="Diffie-Hellman" OPENSSL_VERSION_PTEXT;

@@ -85,11 +87,13 @@ int DH_set_method(DH *dh, const DH_METHOD *meth)
        const DH_METHOD *mtmp;
        mtmp = dh->meth;
        if (mtmp->finish) mtmp->finish(dh);
+#ifndef OPENSSL_NO_ENGINE
 	if (dh->engine)
 		{
 		ENGINE_finish(dh->engine);
 		dh->engine = NULL;
 		}
+#endif
        dh->meth = meth;
        if (meth->init) meth->init(dh);
        return 1;
@@ -112,6 +116,7 @@ DH *DH_new_method(ENGINE *engine)
 		}

 	ret->meth = DH_get_default_method();
+#ifndef OPENSSL_NO_ENGINE
 	if (engine)
 		{
 		if (!ENGINE_init(engine))
@@ -135,6 +140,7 @@ DH *DH_new_method(ENGINE *engine)
 			return NULL;
 			}
 		}
+#endif

 	ret->pad=0;
 	ret->version=0;
@@ -154,8 +160,10 @@ DH *DH_new_method(ENGINE *engine)
 	CRYPTO_new_ex_data(CRYPTO_EX_INDEX_DH, ret, &ret->ex_data);
 	if ((ret->meth->init != NULL) && !ret->meth->init(ret))
 		{
+#ifndef OPENSSL_NO_ENGINE
 		if (ret->engine)
 			ENGINE_finish(ret->engine);
+#endif
 		CRYPTO_free_ex_data(CRYPTO_EX_INDEX_DH, ret, &ret->ex_data);
 		OPENSSL_free(ret);
 		ret=NULL;
@@ -182,8 +190,10 @@ void DH_free(DH *r)

 	if (r->meth->finish)
 		r->meth->finish(r);
+#ifndef OPENSSL_NO_ENGINE
 	if (r->engine)
 		ENGINE_finish(r->engine);
+#endif

 	CRYPTO_free_ex_data(CRYPTO_EX_INDEX_DH, r, &r->ex_data);

--- a/crypto/dsa/dsa_lib.c
+++ b/crypto/dsa/dsa_lib.c
@@ -63,7 +63,9 @@
 #include <openssl/bn.h>
 #include <openssl/dsa.h>
 #include <openssl/asn1.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
+#endif

 const char *DSA_version="DSA" OPENSSL_VERSION_PTEXT;

@@ -93,11 +95,13 @@ int DSA_set_method(DSA *dsa, const DSA_METHOD *meth)
        const DSA_METHOD *mtmp;
        mtmp = dsa->meth;
        if (mtmp->finish) mtmp->finish(dsa);
+#ifndef OPENSSL_NO_ENGINE
 	if (dsa->engine)
 		{
 		ENGINE_finish(dsa->engine);
 		dsa->engine = NULL;
 		}
+#endif
        dsa->meth = meth;
        if (meth->init) meth->init(dsa);
        return 1;
@@ -114,6 +118,7 @@ DSA *DSA_new_method(ENGINE *engine)
 		return(NULL);
 		}
 	ret->meth = DSA_get_default_method();
+#ifndef OPENSSL_NO_ENGINE
 	if (engine)
 		{
 		if (!ENGINE_init(engine))
@@ -138,6 +143,7 @@ DSA *DSA_new_method(ENGINE *engine)
 			return NULL;
 			}
 		}
+#endif

 	ret->pad=0;
 	ret->version=0;
@@ -158,8 +164,10 @@ DSA *DSA_new_method(ENGINE *engine)
 	CRYPTO_new_ex_data(CRYPTO_EX_INDEX_DSA, ret, &ret->ex_data);
 	if ((ret->meth->init != NULL) && !ret->meth->init(ret))
 		{
+#ifndef OPENSSL_NO_ENGINE
 		if (ret->engine)
 			ENGINE_finish(ret->engine);
+#endif
 		CRYPTO_free_ex_data(CRYPTO_EX_INDEX_DSA, ret, &ret->ex_data);
 		OPENSSL_free(ret);
 		ret=NULL;
@@ -189,8 +197,10 @@ void DSA_free(DSA *r)

 	if(r->meth->finish)
 		r->meth->finish(r);
+#ifndef OPENSSL_NO_ENGINE
 	if(r->engine)
 		ENGINE_finish(r->engine);
+#endif

 	CRYPTO_free_ex_data(CRYPTO_EX_INDEX_DSA, r, &r->ex_data);

--- a/crypto/dsa/dsa_ossl.c
+++ b/crypto/dsa/dsa_ossl.c
@@ -64,7 +64,9 @@
 #include <openssl/dsa.h>
 #include <openssl/rand.h>
 #include <openssl/asn1.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
+#endif

 static DSA_SIG *dsa_do_sign(const unsigned char *dgst, int dlen, DSA *dsa);
 static int dsa_sign_setup(DSA *dsa, BN_CTX *ctx_in, BIGNUM **kinvp, BIGNUM **rp);
@@ -106,13 +108,15 @@ static DSA_SIG *dsa_do_sign(const unsigned char *dgst, int dlen, DSA *dsa)
 	int i,reason=ERR_R_BN_LIB;
 	DSA_SIG *ret=NULL;

+	BN_init(&m);
+	BN_init(&xr);
+
 	if (!dsa->p || !dsa->q || !dsa->g)
 		{
 		reason=DSA_R_MISSING_PARAMETERS;
 		goto err;
 		}
-	BN_init(&m);
-	BN_init(&xr);
+
 	s=BN_new();
 	if (s == NULL) goto err;

@@ -178,6 +182,9 @@ static int dsa_sign_setup(DSA *dsa, BN_CTX *ctx_in, BIGNUM **kinvp, BIGNUM **rp)
 		DSAerr(DSA_F_DSA_SIGN_SETUP,DSA_R_MISSING_PARAMETERS);
 		return 0;
 		}
+
+	BN_init(&k);
+
 	if (ctx_in == NULL)
 		{
 		if ((ctx=BN_CTX_new()) == NULL) goto err;
@@ -185,7 +192,6 @@ static int dsa_sign_setup(DSA *dsa, BN_CTX *ctx_in, BIGNUM **kinvp, BIGNUM **rp)
 	else
 		ctx=ctx_in;

-	BN_init(&k);
 	if ((r=BN_new()) == NULL) goto err;
 	kinv=NULL;

@@ -241,11 +247,12 @@ static int dsa_do_verify(const unsigned char *dgst, int dgst_len, DSA_SIG *sig,
 		return -1;
 		}

-	if ((ctx=BN_CTX_new()) == NULL) goto err;
 	BN_init(&u1);
 	BN_init(&u2);
 	BN_init(&t1);

+	if ((ctx=BN_CTX_new()) == NULL) goto err;
+
 	if (BN_is_zero(sig->r) || sig->r->neg || BN_ucmp(sig->r, dsa->q) >= 0)
 		{
 		ret = 0;
--- a/crypto/dsa/dsa_sign.c
+++ b/crypto/dsa/dsa_sign.c
@@ -64,7 +64,9 @@
 #include <openssl/dsa.h>
 #include <openssl/rand.h>
 #include <openssl/asn1.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
+#endif

 DSA_SIG * DSA_do_sign(const unsigned char *dgst, int dlen, DSA *dsa)
 	{
--- a/crypto/dsa/dsa_vrf.c
+++ b/crypto/dsa/dsa_vrf.c
@@ -65,7 +65,9 @@
 #include <openssl/rand.h>
 #include <openssl/asn1.h>
 #include <openssl/asn1_mac.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
+#endif

 int DSA_do_verify(const unsigned char *dgst, int dgst_len, DSA_SIG *sig,
 		  DSA *dsa)
--- a/crypto/dsa/dsagen.c
+++ b/crypto/dsa/dsagen.c
@@ -103,7 +103,7 @@ main()
 		bio_err=BIO_new_fp(stderr,BIO_NOCLOSE);

 	memcpy(seed_buf,seed,20);
-	dsa=DSA_generate_parameters(1024,seed,20,&counter,&h,cb);
+	dsa=DSA_generate_parameters(1024,seed,20,&counter,&h,cb,bio_err);

 	if (dsa == NULL)
 		DSA_print(bio_err,dsa,0);
--- a/crypto/dsa/dsatest.c
+++ b/crypto/dsa/dsatest.c
@@ -68,7 +68,9 @@
 #include <openssl/rand.h>
 #include <openssl/bio.h>
 #include <openssl/err.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
+#endif
 #ifdef OPENSSL_SYS_WINDOWS
 #include "../bio/bss_file.c"
 #endif
@@ -222,6 +224,7 @@ end:
 static int cb_exit(int ec)
 	{
 	EXIT(ec);
+	return(0);		/* To keep some compilers quiet */
 	}

 static void MS_CALLBACK dsa_cb(int p, int n, void *arg)
--- a/crypto/dso/dso_dl.c
+++ b/crypto/dso/dso_dl.c
@@ -126,7 +126,7 @@ static int dl_load(DSO *dso)
 		DSOerr(DSO_F_DL_LOAD,DSO_R_NO_FILENAME);
 		goto err;
 		}
-	ptr = shl_load(filename, BIND_IMMEDIATE|DYNAMIC_PATH, NULL);
+	ptr = shl_load(filename, BIND_IMMEDIATE|DYNAMIC_PATH, 0L);
 	if(ptr == NULL)
 		{
 		DSOerr(DSO_F_DL_LOAD,DSO_R_LOAD_FAILED);
--- a/crypto/ec/ec.h
+++ b/crypto/ec/ec.h
@@ -195,7 +195,6 @@ void ERR_load_EC_strings(void);
 #define EC_F_EC_GROUP_GET0_GENERATOR			 139
 #define EC_F_EC_GROUP_GET_COFACTOR			 140
 #define EC_F_EC_GROUP_GET_CURVE_GFP			 130
-#define EC_F_EC_GROUP_GET_EXTRA_DATA			 107
 #define EC_F_EC_GROUP_GET_ORDER				 141
 #define EC_F_EC_GROUP_NEW				 108
 #define EC_F_EC_GROUP_PRECOMPUTE_MULT			 142
@@ -232,7 +231,6 @@ void ERR_load_EC_strings(void);
 #define EC_R_INVALID_FIELD				 103
 #define EC_R_INVALID_FORM				 104
 #define EC_R_NOT_INITIALIZED				 111
-#define EC_R_NO_SUCH_EXTRA_DATA				 105
 #define EC_R_POINT_AT_INFINITY				 106
 #define EC_R_POINT_IS_NOT_ON_CURVE			 107
 #define EC_R_SLOT_FULL					 108
--- a/crypto/ec/ec_err.c
+++ b/crypto/ec/ec_err.c
@@ -84,7 +84,6 @@ static ERR_STRING_DATA EC_str_functs[]=
 {ERR_PACK(0,EC_F_EC_GROUP_GET0_GENERATOR,0),	"EC_GROUP_get0_generator"},
 {ERR_PACK(0,EC_F_EC_GROUP_GET_COFACTOR,0),	"EC_GROUP_get_cofactor"},
 {ERR_PACK(0,EC_F_EC_GROUP_GET_CURVE_GFP,0),	"EC_GROUP_get_curve_GFp"},
-{ERR_PACK(0,EC_F_EC_GROUP_GET_EXTRA_DATA,0),	"EC_GROUP_get_extra_data"},
 {ERR_PACK(0,EC_F_EC_GROUP_GET_ORDER,0),	"EC_GROUP_get_order"},
 {ERR_PACK(0,EC_F_EC_GROUP_NEW,0),	"EC_GROUP_new"},
 {ERR_PACK(0,EC_F_EC_GROUP_PRECOMPUTE_MULT,0),	"EC_GROUP_precompute_mult"},
@@ -124,7 +123,6 @@ static ERR_STRING_DATA EC_str_reasons[]=
 {EC_R_INVALID_FIELD                      ,"invalid field"},
 {EC_R_INVALID_FORM                       ,"invalid form"},
 {EC_R_NOT_INITIALIZED                    ,"not initialized"},
-{EC_R_NO_SUCH_EXTRA_DATA                 ,"no such extra data"},
 {EC_R_POINT_AT_INFINITY                  ,"point at infinity"},
 {EC_R_POINT_IS_NOT_ON_CURVE              ,"point is not on curve"},
 {EC_R_SLOT_FULL                          ,"slot full"},
--- a/crypto/ec/ec_lib.c
+++ b/crypto/ec/ec_lib.c
@@ -268,7 +268,9 @@ void *EC_GROUP_get_extra_data(const EC_GROUP *group, void *(*extra_data_dup_func
 		|| (group->extra_data_free_func != extra_data_free_func)
 		|| (group->extra_data_clear_free_func != extra_data_clear_free_func))
 		{
-		ECerr(EC_F_EC_GROUP_GET_EXTRA_DATA, EC_R_NO_SUCH_EXTRA_DATA);
+#if 0 /* this was an error in 0.9.7, but that does not make a lot of sense */
+		ECerr(..._F_EC_GROUP_GET_EXTRA_DATA, ..._R_NO_SUCH_EXTRA_DATA);
+#endif
 		return NULL;
 		}

--- a/crypto/ec/ec_mult.c
+++ b/crypto/ec/ec_mult.c
@@ -209,6 +209,17 @@ int EC_POINTs_mul(const EC_GROUP *group, EC_POINT *r, const BIGNUM *scalar,
 	EC_POINT ***val_sub = NULL; /* pointers to sub-arrays of 'val' */
 	int ret = 0;
 	
+	if (group->meth != r->meth)
+		{
+		ECerr(EC_F_EC_POINTS_MUL, EC_R_INCOMPATIBLE_OBJECTS);
+		return 0;
+		}
+
+	if ((scalar == NULL) && (num == 0))
+		{
+		return EC_POINT_set_to_infinity(group, r);
+		}
+
 	if (scalar != NULL)
 		{
 		generator = EC_GROUP_get0_generator(group);
--- a/crypto/ec/ectest.c
+++ b/crypto/ec/ectest.c
@@ -70,7 +70,9 @@ int main(int argc, char * argv[]) { puts("Elliptic curves are disabled."); retur


 #include <openssl/ec.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
+#endif
 #include <openssl/err.h>

 #define ABORT do { \
@@ -628,7 +630,9 @@ int main(int argc, char *argv[])
 	if (P_384) EC_GROUP_free(P_384);
 	if (P_521) EC_GROUP_free(P_521);

+#ifndef OPENSSL_NO_ENGINE
 	ENGINE_cleanup();
+#endif
 	CRYPTO_cleanup_all_ex_data();
 	ERR_free_strings();
 	ERR_remove_state(0);
--- a/crypto/engine/Makefile.ssl
+++ b/crypto/engine/Makefile.ssl
@@ -50,7 +50,7 @@ all:	lib

 lib:	$(LIBOBJ)
 	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB)
+	$(RANLIB) $(LIB) || echo Never mind.
 	@touch lib

 files:
--- a/crypto/engine/eng_all.c
+++ b/crypto/engine/eng_all.c
@@ -95,19 +95,19 @@ void ENGINE_load_builtin_engines(void)
 #ifndef OPENSSL_NO_HW_4758_CCA
 	ENGINE_load_4758cca();
 #endif
-#ifdef __OpenBSD__
+#if defined(__OpenBSD__) || defined(__FreeBSD__)
 	ENGINE_load_cryptodev();
 #endif
 #endif
 	}

-#ifdef __OpenBSD__
-void ENGINE_setup_openbsd(void) {
-	static int openbsd_default_loaded = 0;
-	if (!openbsd_default_loaded) {
+#if defined(__OpenBSD__) || defined(__FreeBSD__)
+void ENGINE_setup_bsd_cryptodev(void) {
+	static int bsd_cryptodev_default_loaded = 0;
+	if (!bsd_cryptodev_default_loaded) {
 		ENGINE_load_cryptodev();
 		ENGINE_register_all_complete();
 	}
-	openbsd_default_loaded=1;
+	bsd_cryptodev_default_loaded=1;
 }
 #endif
--- a/crypto/engine/engine.h
+++ b/crypto/engine/engine.h
@@ -59,6 +59,12 @@
 #ifndef HEADER_ENGINE_H
 #define HEADER_ENGINE_H

+#include <openssl/opensslconf.h>
+
+#ifdef OPENSSL_NO_ENGINE
+#error ENGINE is disabled.
+#endif
+
 #include <openssl/ossl_typ.h>
 #include <openssl/bn.h>
 #ifndef OPENSSL_NO_RSA
--- a/crypto/engine/enginetest.c
+++ b/crypto/engine/enginetest.c
@@ -56,9 +56,17 @@
 *
 */

-#include <openssl/e_os2.h>
 #include <stdio.h>
 #include <string.h>
+
+#ifdef OPENSSL_NO_ENGINE
+int main(int argc, char *argv[])
+{
+    printf("No ENGINE support\n");
+    return(0);
+}
+#else
+#include <openssl/e_os2.h>
 #include <openssl/buffer.h>
 #include <openssl/crypto.h>
 #include <openssl/engine.h>
@@ -272,3 +280,4 @@ end:
 	CRYPTO_mem_leaks_fp(stderr);
 	return to_return;
 	}
+#endif
--- a/crypto/engine/hw_cryptodev.c
+++ b/crypto/engine/hw_cryptodev.c
@@ -33,31 +33,28 @@
 #include <openssl/engine.h>
 #include <openssl/evp.h>

-#ifndef __OpenBSD__
+#if (defined(__unix__) || defined(unix)) && !defined(USG)
+#include <sys/param.h>
+# if (OpenBSD >= 200112) || ((__FreeBSD_version >= 470101 && __FreeBSD_version < 500000) || __FreeBSD_version >= 500041)
+# define HAVE_CRYPTODEV
+# endif
+# if (OpenBSD >= 200110)
+# define HAVE_SYSLOG_R
+# endif
+#endif
+
+#ifndef HAVE_CRYPTODEV

 void
 ENGINE_load_cryptodev(void)
 {
-	/* This is a NOP unless __OpenBSD__ is defined */
+	/* This is a NOP on platforms without /dev/crypto */
 	return;
 }

-#else /* __OpenBSD__ */
+#else 

 #include <sys/types.h>
-#include <sys/param.h>
-
-#if OpenBSD < 200112
-
-void
-ENGINE_load_cryptodev(void)
-{
-	/* This is a NOP unless we have release 3.0 (released december 2001) */
-	return;
-}
-
-#else /* OpenBSD 3.0 or above */
-
 #include <crypto/cryptodev.h>
 #include <sys/ioctl.h>
 #include <errno.h>
@@ -1032,12 +1029,18 @@ static DH_METHOD cryptodev_dh = {
 static int
 cryptodev_ctrl(ENGINE *e, int cmd, long i, void *p, void (*f)())
 {
+#ifdef HAVE_SYSLOG_R
 	struct syslog_data sd = SYSLOG_DATA_INIT;
+#endif

 	switch (cmd) {
 	default:
+#ifdef HAVE_SYSLOG_R
 		syslog_r(LOG_ERR, &sd,
 		    "cryptodev_ctrl: unknown command %d", cmd);
+#else
+		syslog(LOG_ERR, "cryptodev_ctrl: unknown command %d", cmd);
+#endif
 		break;
 	}
 	return (1);
@@ -1064,7 +1067,7 @@ ENGINE_load_cryptodev(void)
 	close(fd);

 	if (!ENGINE_set_id(engine, "cryptodev") ||
-	    !ENGINE_set_name(engine, "OpenBSD cryptodev engine") ||
+	    !ENGINE_set_name(engine, "BSD cryptodev engine") ||
 	    !ENGINE_set_ciphers(engine, cryptodev_engine_ciphers) ||
 	    !ENGINE_set_digests(engine, cryptodev_engine_digests) ||
 	    !ENGINE_set_ctrl_function(engine, cryptodev_ctrl) ||
@@ -1126,5 +1129,4 @@ ENGINE_load_cryptodev(void)
 	ERR_clear_error();
 }

-#endif /* OpenBSD 3.0 or above */
-#endif /* __OpenBSD__ */
+#endif /* HAVE_CRYPTODEV */
--- a/Show More
+++ b/Show More