Release 0.9.6e

Submitted by:
Reviewed by:
PR:

CHANGES

@@ -2,114 +2,8 @@
  OpenSSL CHANGES
  _______________
 
- Changes between 0.9.6h and 0.9.6i  [19 Feb 2003]
-
-  *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
-     via timing by performing a MAC computation even if incorrrect
-     block cipher padding has been found.  This is a countermeasure
-     against active attacks where the attacker has to distinguish
-     between bad padding and a MAC verification error. (CAN-2003-0078)
-
-     [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
-     Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
-     Martin Vuagnoux (EPFL, Ilion)]
-
- Changes between 0.9.6g and 0.9.6h  [5 Dec 2002]
-
-  *) New function OPENSSL_cleanse(), which is used to cleanse a section of
-     memory from it's contents.  This is done with a counter that will
-     place alternating values in each byte.  This can be used to solve
-     two issues: 1) the removal of calls to memset() by highly optimizing
-     compilers, and 2) cleansing with other values than 0, since those can
-     be read through on certain media, for example a swap space on disk.
-     [Geoff Thorpe]
-
-  *) Bugfix: client side session caching did not work with external caching,
-     because the session->cipher setting was not restored when reloading
-     from the external cache. This problem was masked, when
-     SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG (part of SSL_OP_ALL) was set.
-     (Found by Steve Haslam <steve@araqnid.ddts.net>.)
-     [Lutz Jaenicke]
-
-  *) Fix client_certificate (ssl/s2_clnt.c): The permissible total
-     length of the REQUEST-CERTIFICATE message is 18 .. 34, not 17 .. 33.
-     [Zeev Lieber <zeev-l@yahoo.com>]
-
-  *) Undo an undocumented change introduced in 0.9.6e which caused
-     repeated calls to OpenSSL_add_all_ciphers() and 
-     OpenSSL_add_all_digests() to be ignored, even after calling
-     EVP_cleanup().
-     [Richard Levitte]
-
-  *) Change the default configuration reader to deal with last line not
-     being properly terminated.
-     [Richard Levitte]
-
-  *) Change X509_NAME_cmp() so it applies the special rules on handling
-     DN values that are of type PrintableString, as well as RDNs of type
-     emailAddress where the value has the type ia5String.
-     [stefank@valicert.com via Richard Levitte]
-
-  *) Add a SSL_SESS_CACHE_NO_INTERNAL_STORE flag to take over half
-     the job SSL_SESS_CACHE_NO_INTERNAL_LOOKUP was inconsistently
-     doing, define a new flag (SSL_SESS_CACHE_NO_INTERNAL) to be
-     the bitwise-OR of the two for use by the majority of applications
-     wanting this behaviour, and update the docs. The documented
-     behaviour and actual behaviour were inconsistent and had been
-     changing anyway, so this is more a bug-fix than a behavioural
-     change.
-     [Geoff Thorpe, diagnosed by Nadav Har'El]
-
-  *) Don't impose a 16-byte length minimum on session IDs in ssl/s3_clnt.c
-     (the SSL 3.0 and TLS 1.0 specifications allow any length up to 32 bytes).
-     [Bodo Moeller]
-
-  *) Fix initialization code race conditions in
-        SSLv23_method(),  SSLv23_client_method(),   SSLv23_server_method(),
-        SSLv2_method(),   SSLv2_client_method(),    SSLv2_server_method(),
-        SSLv3_method(),   SSLv3_client_method(),    SSLv3_server_method(),
-        TLSv1_method(),   TLSv1_client_method(),    TLSv1_server_method(),
-        ssl2_get_cipher_by_char(),
-        ssl3_get_cipher_by_char().
-     [Patrick McCormick <patrick@tellme.com>, Bodo Moeller]
-
-  *) Reorder cleanup sequence in SSL_CTX_free(): only remove the ex_data after
-     the cached sessions are flushed, as the remove_cb() might use ex_data
-     contents. Bug found by Sam Varshavchik <mrsam@courier-mta.com>
-     (see [openssl.org #212]).
-     [Geoff Thorpe, Lutz Jaenicke]
-
-  *) Fix typo in OBJ_txt2obj which incorrectly passed the content
-     length, instead of the encoding length to d2i_ASN1_OBJECT.
-     [Steve Henson]
-
- Changes between 0.9.6f and 0.9.6g  [9 Aug 2002]
-
-  *) [In 0.9.6g-engine release:]
-     Fix crypto/engine/vendor_defns/cswift.h for WIN32 (use '_stdcall').
-     [Lynn Gazis <lgazis@rainbow.com>]
-
- Changes between 0.9.6e and 0.9.6f  [8 Aug 2002]
-
-  *) Fix ASN1 checks. Check for overflow by comparing with LONG_MAX
-     and get fix the header length calculation.
-     [Florian Weimer <Weimer@CERT.Uni-Stuttgart.DE>,
-	Alon Kantor <alonk@checkpoint.com> (and others),
-	Steve Henson]
-
-  *) Use proper error handling instead of 'assertions' in buffer
-     overflow checks added in 0.9.6e.  This prevents DoS (the
-     assertions could call abort()).
-     [Arne Ansper <arne@ats.cyber.ee>, Bodo Moeller]
-
  Changes between 0.9.6d and 0.9.6e  [30 Jul 2002]
 
-  *) Add various sanity checks to asn1_get_length() to reject
-     the ASN1 length bytes if they exceed sizeof(long), will appear
-     negative or the content length exceeds the length of the
-     supplied buffer.
-     [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
-
   *) Fix cipher selection routines: ciphers without encryption had no flags
      for the cipher strength set and where therefore not handled correctly
      by the selection routines (PR #130).
@@ -131,6 +25,7 @@
      applications.
      [Bodo Moeller]
 
+
   *) Changes in security patch:
 
      Changes marked "(CHATS)" were sponsored by the Defense Advanced
@@ -141,7 +36,7 @@
   *) Add various sanity checks to asn1_get_length() to reject
      the ASN1 length bytes if they exceed sizeof(long), will appear
      negative or the content length exceeds the length of the
-     supplied buffer. (CAN-2002-0659)
+     supplied buffer.
      [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
 
   *) Assertions for various potential buffer overflows, not known to
@@ -246,8 +141,8 @@
      value is 0.
      [Richard Levitte]
 
-  *) [In 0.9.6d-engine release:]
-     Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
+  *) [In 0.9.6c-engine release:]
+     Fix a crashbug and a logic bug in hwcrhk_load_pubkey()
      [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
 
   *) Add the configuration target linux-s390x.

Configure

@@ -10,7 +10,7 @@ use strict;
 
 # see INSTALL for instructions.
 
-my $usage="Usage: Configure [no-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-Kxxx] [rsaref] [no-threads] [no-asm] [no-dso] [386] [--prefix=DIR] [--openssldir=OPENSSLDIR] [--test-sanity] os/compiler[:flags]\n";
+my $usage="Usage: Configure [no-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-Kxxx] [no-hw-xxx|no-hw] [rsaref] [no-threads] [no-asm] [no-dso] [386] [--prefix=DIR] [--openssldir=OPENSSLDIR] [--test-sanity] os/compiler[:flags]\n";
 
 # Options:
 #
@@ -23,6 +23,12 @@ my $usage="Usage: Configure [no-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-
 #               default).  This needn't be set in advance, you can
 #               just as well use "make INSTALL_PREFIX=/whatever install".
 #
+# no-hw-xxx     do not compile support for specific crypto hardware.
+#               Generic OpenSSL-style methods relating to this support
+#               are always compiled but return NULL if the hardware
+#               support isn't compiled.
+# no-hw         do not compile support for any crypto hardware.
+#
 # --test-sanity Make a number of sanity checks on the data in this file.
 #               This is a debugging tool for OpenSSL developers.
 #
@@ -31,6 +37,10 @@ my $usage="Usage: Configure [no-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-
 #               multithreaded applications (default is "threads" if we
 #               know how to do it)
 # [no-]shared	[don't] try to create shared libraries when supported.
+#               IT IS NOT RECOMMENDED TO USE "shared"!  Since this is a
+#               development branch, the positions of the ENGINE symbols
+#               in the transfer vector are constantly moving, so binary
+#               backward compatibility can't be guaranteed in any way.
 # no-asm        do not use assembler
 # no-dso        do not compile in any native shared-library methods. This
 #               will ensure that all methods just return NULL.
@@ -122,7 +132,7 @@ my %table=(
 "debug-bodo",	"gcc:-DL_ENDIAN -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -DPEDANTIC -DBIO_PAIR_DEBUG -g -m486 -pedantic -Wshadow -Wall::-D_REENTRANT::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
 "debug-ulf",	"gcc:-DL_ENDIAN -DREF_CHECK -DCONF_DEBUG -DBN_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -DPEDANTIC -g -O2 -m486 -Wall -Werror -Wshadow -pipe::-D_REENTRANT::${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
 "debug-steve",	"gcc:-DL_ENDIAN -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DDEBUG_SAFESTACK -DCRYPTO_MDEBUG_ALL -DPEDANTIC -g -O2 -m486 -pedantic -Wall -Werror -Wshadow -pipe::-D_REENTRANT::${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
-"debug-levitte-linux-elf","gcc:-DUSE_ALLOCATING_PRINT -DRL_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DNO_ASM -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -ggdb -g3 -m486 -pedantic -ansi -Wall -Wshadow -Wstrict-prototypes -Wmissing-prototypes -pipe::-D_REENTRANT:-ldl:::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-levitte-linux-elf","gcc:-DUSE_ALLOCATING_PRINT -DRL_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DNO_ASM -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -ggdb -g3 -m486 -pedantic -ansi -Wall -Wshadow -Wid-clash-31 -pipe::-D_REENTRANT:-ldl:::::::::::dlfcn",
 "dist",		"cc:-O::(unknown):::::",
 
 # Basic configs that should work on any (32 and less bit) box
@@ -344,8 +354,8 @@ my %table=(
 "linux-mips",   "gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::(unknown)::BN_LLONG:::",
 "linux-ppc",	"gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT:-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_RISC1 DES_UNROLL::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-m68k",   "gcc:-DB_ENDIAN -DTERMIO -O2 -fomit-frame-pointer -Wall::-D_REENTRANT::BN_LLONG::",
-"linux-s390",	"gcc:-DB_ENDIAN -DTERMIO -DNO_ASM -O3 -fomit-frame-pointer -Wall::-D_REENTRANT:-ldl:BN_LLONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR),\$(SHLIB_MINOR)",
-"linux-s390x", "gcc:-DB_ENDIAN -DTERMIO -DNO_ASM -O3 -fomit-frame-pointer -Wall::-D_REENTRANT:-ldl:SIXTY_FOUR_BIT_LONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-s390",	"gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::BN_LLONG::",
+"linux-s390x", "gcc:-DB_ENDIAN -DTERMIO -DNO_ASM -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::SIXTY_FOUR_BIT_LONG:::::::::::linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-ia64",   "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT:-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK RC4_CHAR:asm/ia64.o:::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "NetBSD-sparc",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -mv8 -Wall -DB_ENDIAN::(unknown)::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "NetBSD-m68",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -Wall -DB_ENDIAN::(unknown)::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
@@ -395,7 +405,7 @@ my %table=(
 "aix-cc",   "cc:-O -DAIX -DB_ENDIAN -qmaxmem=16384::(unknown)::BN_LLONG RC4_CHAR:::",
 "aix-gcc",  "gcc:-O3 -DAIX -DB_ENDIAN::(unknown)::BN_LLONG RC4_CHAR:::",
 "aix43-cc",   "cc:-O -DAIX -DB_ENDIAN -qmaxmem=16384::(unknown)::BN_LLONG RC4_CHAR::::::::::dlfcn:",
-"aix43-gcc",  "gcc:-O1 -DAIX -DB_ENDIAN::(unknown)::BN_LLONG RC4_CHAR::::::::::dlfcn:",
+"aix43-gcc",  "gcc:-O3 -DAIX -DB_ENDIAN::(unknown)::BN_LLONG RC4_CHAR::::::::::dlfcn:",
 
 #
 # Cray T90 and similar (SDSC)
@@ -477,7 +487,7 @@ my %table=(
 
 # Cygwin
 "Cygwin-pre1.3", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O2 -m486 -Wall::(unknown)::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::win32",
-"Cygwin", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O2 -march=i486 -Wall::::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::win32:cygwin-shared:::.dll",
+"Cygwin", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O2 -m486 -Wall::::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::win32:cygwin-shared:::.dll",
 
 # Ultrix from Bernhard Simon <simon@zid.tuwien.ac.at>
 "ultrix-cc","cc:-std1 -O -Olimit 1000 -DL_ENDIAN::(unknown)::::::",
@@ -495,18 +505,12 @@ my %table=(
 "rhapsody-ppc-cc","cc:-O3 -DB_ENDIAN::(unknown)::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::",
 "darwin-ppc-cc","cc:-O3 -D_DARWIN -DB_ENDIAN -fno-common::-D_REENTRANT::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::::::::::darwin-shared:-fPIC::.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
 
-##### A/UX
-"aux3-gcc","gcc:-O2 -DTERMIO::(unknown):-lbsd:RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::",
-
 ##### Sony NEWS-OS 4.x
 "newsos4-gcc","gcc:-O -DB_ENDIAN -DNEWS4::(unknown):-lmld -liberty:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::",
 
 ##### VxWorks for various targets
 "vxworks-ppc405","ccppc:-g -msoft-float -mlongcall -DVXWORKS -DCPU=PPC405 -I\$(WIND_BASE)/target/h:::-r:::::",
 
-##### Compaq Non-Stop Kernel (Tandem)
-"tandem-c89","c89:-Ww -D__TANDEM -D_XOPEN_SOURCE -D_XOPEN_SOURCE_EXTENDED=1 -D_TANDEM_SOURCE -DB_ENDIAN::(unknown)::THIRTY_TWO_BIT:::",
-
 );
 
 my @WinTargets=qw(VC-NT VC-WIN32 VC-WIN16 VC-W31-16 VC-W31-32 VC-MSDOS BC-32
@@ -583,7 +587,6 @@ my $libs;
 my $target;
 my $options;
 my $symlink;
-my $make_depend=0;
 
 my @argvcopy=@ARGV;
 my $argvstring="";
@@ -618,6 +621,18 @@ PROCESS_ARGS:
 			$flags .= "-DNO_ASM ";
 			$openssl_other_defines .= "#define NO_ASM\n";
 			}
+		elsif (/^no-hw-(.+)$/)
+			{
+			my $hw=$1;
+			$hw =~ tr/[a-z]/[A-Z]/;
+			$flags .= "-DNO_HW_$hw ";
+			$openssl_other_defines .= "#define NO_HW_$hw\n";
+			}
+		elsif (/^no-hw$/)
+			{
+			$flags .= "-DNO_HW ";
+			$openssl_other_defines .= "#define NO_HW\n";
+			}
 		elsif (/^no-dso$/)
 			{ $no_dso=1; }
 		elsif (/^no-threads$/)
@@ -626,7 +641,7 @@ PROCESS_ARGS:
 			{ $threads=1; }
 		elsif (/^no-shared$/)
 			{ $no_shared=1; }
-		elsif (/^shared$/ || /^-shared$/ || /^--shared$/)
+		elsif (/^shared$/)
 			{ $no_shared=0; }
 		elsif (/^no-symlinks$/)
 			{ $symlink=0; }
@@ -1195,13 +1210,11 @@ if($IsWindows) {
 EOF
 	close(OUT);
 } else {
-	my $make_command = "make -f Makefile.ssl PERL=\'$perl\'";
-	my $make_targets = "";
-	$make_targets .= " links" if $symlink;
-	$make_targets .= " depend" if $depflags ne "" && $make_depend;
-	$make_targets .= " gentests" if $symlink;
-	(system $make_command.$make_targets) == 0 or exit $?
-		if $make_targets ne "";
+	(system "make -f Makefile.ssl PERL=\'$perl\' links") == 0 or exit $?
+		if $symlink;
+	### (system 'make depend') == 0 or exit $? if $depflags ne "";
+	# Run "make depend" manually if you want to be able to delete
+	# the source code files of ciphers you left out.
 	if ( $perl =~ m@^/@) {
 	    &dofile("tools/c_rehash",$perl,'^#!/', '#!%s','^my \$dir;$', 'my $dir = "' . $openssldir . '";');
 	    &dofile("apps/der_chop",$perl,'^#!/', '#!%s');
@@ -1212,15 +1225,6 @@ EOF
 	    &dofile("apps/der_chop",'/usr/local/bin/perl','^#!/', '#!%s');
 	    &dofile("apps/CA.pl",'/usr/local/bin/perl','^#!/', '#!%s');
 	}	    
-	if ($depflags ne "" && !$make_depend) {
-		print <<EOF;
-
-Since you've disabled at least one algorithm, you need to do the following
-before building:
-
-	make depend
-EOF
-	}	    
 }
 
 print <<EOF;

FAQ

@@ -9,7 +9,6 @@ OpenSSL  -  Frequently Asked Questions
 * Where can I get a compiled version of OpenSSL?
 * Why aren't tools like 'autoconf' and 'libtool' used?
 * What is an 'engine' version?
-* How do I check the authenticity of the OpenSSL distribution?
 
 [LEGAL] Legal questions
 
@@ -36,7 +35,6 @@ OpenSSL  -  Frequently Asked Questions
 * Why does the linker complain about undefined symbols?
 * Why does the OpenSSL test fail with "bc: command not found"?
 * Why does the OpenSSL test fail with "bc: 1 no implemented"?
-* Why does the OpenSSL test fail with "bc: stack empty"?
 * Why does the OpenSSL compilation fail on Alpha Tru64 Unix?
 * Why does the OpenSSL compilation fail with "ar: command not found"?
 * Why does the OpenSSL compilation fail on Win32 with VC++?
@@ -63,7 +61,7 @@ OpenSSL  -  Frequently Asked Questions
 * Which is the current version of OpenSSL?
 
 The current version is available from <URL: http://www.openssl.org>.
-OpenSSL 0.9.7a was released on February 19, 2003.
+OpenSSL 0.9.6e was released on 30 May, 2002.
 
 In addition to the current stable release, you can also access daily
 snapshots of the OpenSSL development version at <URL:
@@ -134,19 +132,6 @@ hardware. This was realized in a special release '0.9.6-engine'. With
 version 0.9.7 (not yet released) the changes were merged into the main
 development line, so that the special release is no longer necessary.
 
-* How do I check the authenticity of the OpenSSL distribution?
-
-We provide MD5 digests and ASC signatures of each tarball.
-Use MD5 to check that a tarball from a mirror site is identical:
-
-   md5sum TARBALL | awk '{print $1;}' | cmp - TARBALL.md5
-
-You can check authenticity using pgp or gpg. You need the OpenSSL team
-member public key used to sign it (download it from a key server). Then
-just do:
-
-   pgp TARBALL.asc
-
 [LEGAL] =======================================================================
 
 * Do I need patent licenses to use OpenSSL?
@@ -184,30 +169,18 @@ for permission to use their software with OpenSSL.
 
 Cryptographic software needs a source of unpredictable data to work
 correctly.  Many open source operating systems provide a "randomness
-device" (/dev/urandom or /dev/random) that serves this purpose.
-All OpenSSL versions try to use /dev/urandom by default; starting with
-version 0.9.7, OpenSSL also tries /dev/random if /dev/urandom is not
-available.
+device" that serves this purpose.  On other systems, applications have
+to call the RAND_add() or RAND_seed() function with appropriate data
+before generating keys or performing public key encryption.
+(These functions initialize the pseudo-random number generator, PRNG.)
 
-On other systems, applications have to call the RAND_add() or
-RAND_seed() function with appropriate data before generating keys or
-performing public key encryption. (These functions initialize the
-pseudo-random number generator, PRNG.)  Some broken applications do
-not do this.  As of version 0.9.5, the OpenSSL functions that need
-randomness report an error if the random number generator has not been
-seeded with at least 128 bits of randomness.  If this error occurs and
-is not discussed in the documentation of the application you are
-using, please contact the author of that application; it is likely
-that it never worked correctly.  OpenSSL 0.9.5 and later make the
-error visible by refusing to perform potentially insecure encryption.
-
-If you are using Solaris 8, you can add /dev/urandom and /dev/random
-devices by installing patch 112438 (Sparc) or 112439 (x86), which are
-available via the Patchfinder at <URL: http://sunsolve.sun.com>
-(Solaris 9 includes these devices by default). For /dev/random support
-for earlier Solaris versions, see Sun's statement at
-<URL: http://sunsolve.sun.com/pub-cgi/retrieve.pl?doc=fsrdb/27606&zone_32=SUNWski>
-(the SUNWski package is available in patch 105710).
+Some broken applications do not do this.  As of version 0.9.5, the
+OpenSSL functions that need randomness report an error if the random
+number generator has not been seeded with at least 128 bits of
+randomness.  If this error occurs, please contact the author of the
+application you are using.  It is likely that it never worked
+correctly.  OpenSSL 0.9.5 and later make the error visible by refusing
+to perform potentially insecure encryption.
 
 On systems without /dev/urandom and /dev/random, it is a good idea to
 use the Entropy Gathering Demon (EGD); see the RAND_egd() manpage for
@@ -240,6 +213,16 @@ OpenSSL command line tools. Applications using the OpenSSL library
 provide their own configuration options to specify the entropy source,
 please check out the documentation coming the with application.
 
+For Solaris 2.6, Tim Nibbe <tnibbe@sprint.net> and others have suggested
+installing the SUNski package from Sun patch 105710-01 (Sparc) which
+adds a /dev/random device and make sure it gets used, usually through
+$RANDFILE.  There are probably similar patches for the other Solaris
+versions.  An official statement from Sun with respect to /dev/random
+support can be found at
+  http://sunsolve.sun.com/pub-cgi/retrieve.pl?doc=fsrdb/27606&zone_32=SUNWski
+However, be warned that /dev/random is usually a blocking device, which
+may have some effects on OpenSSL.
+
 
 * Why do I get an "unable to write 'random state'" error message?
 
@@ -409,17 +392,6 @@ and compile/install it.  GNU bc (see http://www.gnu.org/software/software.html
 for download instructions) can be safely used, for example.
 
 
-* Why does the OpenSSL test fail with "bc: stack empty"?
-
-On some DG/ux versions, bc seems to have a too small stack for calculations
-that the OpenSSL bntest throws at it.  This gets triggered when you run the
-test suite (using "make test").  The message returned is "bc: stack empty".
-
-The best way to deal with this is to find another implementation of bc
-and compile/install it.  GNU bc (see http://www.gnu.org/software/software.html
-for download instructions) can be safely used, for example.
-
-
 * Why does the OpenSSL compilation fail on Alpha Tru64 Unix?
 
 On some Alpha installations running Tru64 Unix and Compaq C, the compilation

INSTALL

@@ -57,7 +57,10 @@
 
   shared        In addition to the usual static libraries, create shared
                 libraries on platforms where it's supported.  See "Note on
-                shared libraries" below.
+                shared libraries" below.  THIS IS NOT RECOMMENDED!  Since
+                this is a development branch, the positions of the ENGINE
+                symbols in the transfer vector are constantly moving, so
+                binary backward compatibility can't be guaranteed in any way.
 
   no-asm        Do not use assembler code.
 
@@ -129,8 +132,8 @@
      standard headers).  If it is a problem with OpenSSL itself, please
      report the problem to <openssl-bugs@openssl.org> (note that your
      message will be recorded in the request tracker publicly readable
-     via http://www.openssl.org/support/rt2.html and will be forwarded to a
-     public mailing list). Include the output of "make report" in your message.
+     via http://www.openssl.org/rt2.html and will be forwarded to a public
+     mailing list). Include the output of "make report" in your message.
      Please check out the request tracker. Maybe the bug was already
      reported or has already been fixed.
 
@@ -151,7 +154,7 @@
      in Makefile.ssl and run "make clean; make". Please send a bug
      report to <openssl-bugs@openssl.org>, including the output of
      "make report" in order to be added to the request tracker at
-     http://www.openssl.org/support/rt2.html.
+     http://www.openssl.org/rt2.html.
 
   4. If everything tests ok, install OpenSSL with
 
@@ -285,15 +288,3 @@
  targets for shared library creation, like linux-shared.  Those targets
  can currently be used on their own just as well, but this is expected
  to change in future versions of OpenSSL.
-
- Note on random number generation
- --------------------------------
-
- Availability of cryptographically secure random numbers is required for
- secret key generation. OpenSSL provides several options to seed the
- internal PRNG. If not properly seeded, the internal PRNG will refuse
- to deliver random bytes and a "PRNG not seeded error" will occur.
- On systems without /dev/urandom (or similar) device, it may be necessary
- to install additional support software to obtain random seed.
- Please check out the manual pages for RAND_add(), RAND_bytes(), RAND_egd(),
- and the FAQ for more information.

INSTALL.W32

@@ -82,8 +82,7 @@
  There are various changes you can make to the Win32 compile environment. By
  default the library is not compiled with debugging symbols. If you add 'debug'
  to the mk1mf.pl lines in the do_* batch file then debugging symbols will be
- compiled in. Note that mk1mf.pl expects the platform to be the last argument
- on the command line, so 'debug' must appear before that, as all other options.
+ compiled in.
 
  The default Win32 environment is to leave out any Windows NT specific
  features.

MacOS/GetHTTPS.src/MacSocket.cpp

@@ -1287,7 +1287,7 @@ EXITPOINT:
 
 //	Send some bytes
 
-int MacSocket_send(const int inSocketNum,const void *inBuff,int inBuffLength)
+int MacSocket_send(const int inSocketNum,void *inBuff,int inBuffLength)
 {
 OSErr			errCode = noErr;
 int				bytesSent = 0;

MacOS/GetHTTPS.src/MacSocket.h

@@ -62,7 +62,7 @@ int MacSocket_recv(const int inSocketNum,void *outBuff,int outBuffLength,const B
 
 //	Call this to send data on a socket
 
-int MacSocket_send(const int inSocketNum,const void *inBuff,int inBuffLength);
+int MacSocket_send(const int inSocketNum,void *inBuff,int inBuffLength);
 
 
 //	If zero bytes were read in a call to MacSocket_recv(), it may be that the remote end has done a half-close

Makefile.org

@@ -162,7 +162,7 @@ SHLIBDIRS= crypto ssl
 SDIRS=  \
 	md2 md4 md5 sha mdc2 hmac ripemd \
 	des rc2 rc4 rc5 idea bf cast \
-	bn rsa dsa dh dso \
+	bn rsa dsa dh dso engine \
 	buffer bio stack lhash rand err objects \
 	evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp
 
@@ -247,8 +247,7 @@ link-shared:
 		for i in $(SHLIBDIRS); do \
 			prev=lib$$i$(SHLIB_EXT); \
 			for j in $${tmp:-x}; do \
-				( set -x; \
-				rm -f lib$$i$$j; ln -s $$prev lib$$i$$j ); \
+				( set -x; ln -f -s $$prev lib$$i$$j ); \
 				prev=lib$$i$$j; \
 			done; \
 		done; \
@@ -270,7 +269,9 @@ do_gnu-shared:
 	done
 
 DETECT_GNU_LD=${CC} -v 2>&1 | grep '^gcc' >/dev/null 2>&1 && \
-	my_ld=`${CC} -print-prog-name=ld 2>&1` && \
+	collect2=`gcc -print-prog-name=collect2 2>&1` && \
+	[ -n "$$collect2" ] && \
+	my_ld=`$$collect2 --help 2>&1 | grep Usage: | sed 's/^Usage: *\([^ ][^ ]*\).*/\1/'` && \
 	[ -n "$$my_ld" ] && \
 	$$my_ld -v 2>&1 | grep 'GNU ld' >/dev/null 2>&1
 
@@ -527,10 +528,6 @@ links:
 	fi; \
 	done;
 
-gentests:
-	@(cd test && echo "generating dummy tests (if needed)..." && \
-	$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' TESTS='${TESTS}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on generate );
-
 dclean:
 	rm -f *.bak
 	@for i in $(DIRS) ;\
@@ -612,9 +609,6 @@ update: depend errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_
 # and read directly, requiring GNU-Tar. Call "make TAR=gtar dist" if the normal
 # tar does not support the --files-from option.
 tar:
-	find . -type d -print | xargs chmod 755
-	find . -type f -print | xargs chmod a+r
-	find . -type f -perm -0100 -print | xargs chmod a+x
 	find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE | sort > ../$(TARFILE).list; \
 	$(TAR) $(TARFLAGS) --files-from ../$(TARFILE).list -cvf - | \
 	tardy --user_number=0  --user_name=openssl \
@@ -657,10 +651,9 @@ install: all install_docs
 	do \
 		if [ -f "$$i" ]; then \
 		(       echo installing $$i; \
-			cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-			$(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-			chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-			mv $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i ); \
+			cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \
+			$(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
+			chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i ); \
 		fi; \
 	done
 	@if [ -n "$(SHARED_LIBS)" ]; then \
@@ -670,24 +663,20 @@ install: all install_docs
 			if [ -f "$$i" -o -f "$$i.a" ]; then \
 			(       echo installing $$i; \
 				if [ "$(PLATFORM)" != "Cygwin" ]; then \
-					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-					chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-					mv $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
+					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \
+					chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
 				else \
 					c=`echo $$i | sed 's/^lib/cyg/'`; \
-					cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
-					chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
-					mv $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
-					cp $$i.a $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new; \
-					chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new; \
-					mv $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a; \
+					cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
+					chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
+					cp $$i.a $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a; \
+					chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a; \
 				fi ); \
 			fi; \
 		done; \
 		(	here="`pwd`"; \
 			cd $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \
-			set $(MAKE); \
-			$$1 -f $$here/Makefile link-shared ); \
+			make -f $$here/Makefile link-shared ); \
 	fi
 
 install_docs:
@@ -696,23 +685,22 @@ install_docs:
 		$(INSTALL_PREFIX)$(MANDIR)/man3 \
 		$(INSTALL_PREFIX)$(MANDIR)/man5 \
 		$(INSTALL_PREFIX)$(MANDIR)/man7
-	@pod2man="`cd util; ./pod2mantest $(PERL)`"; \
-	for i in doc/apps/*.pod; do \
+	@for i in doc/apps/*.pod; do \
 		fn=`basename $$i .pod`; \
 		if [ "$$fn" = "config" ]; then sec=5; else sec=1; fi; \
 		echo "installing man$$sec/`basename $$i .pod`.$$sec"; \
 		(cd `$(PERL) util/dirname.pl $$i`; \
-		sh -c "$$pod2man \
+		sh -c "$(PERL) `cd ../../util; ./pod2mantest ignore` \
 			--section=$$sec --center=OpenSSL \
 			--release=$(VERSION) `basename $$i`") \
 			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/`basename $$i .pod`.$$sec; \
-	done; \
-	for i in doc/crypto/*.pod doc/ssl/*.pod; do \
+	done
+	@for i in doc/crypto/*.pod doc/ssl/*.pod; do \
 		fn=`basename $$i .pod`; \
 		if [ "$$fn" = "des_modes" ]; then sec=7; else sec=3; fi; \
 		echo "installing man$$sec/`basename $$i .pod`.$$sec"; \
 		(cd `$(PERL) util/dirname.pl $$i`; \
-		sh -c "$$pod2man \
+		sh -c "$(PERL) `cd ../../util; ./pod2mantest ignore` \
 			--section=$$sec --center=OpenSSL \
 			--release=$(VERSION) `basename $$i`") \
 			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/`basename $$i .pod`.$$sec; \

NEWS

@@ -5,37 +5,6 @@
   This file gives a brief overview of the major changes between each OpenSSL
   release. For more details please read the CHANGES file.
 
-  Major changes between OpenSSL 0.9.6h and OpenSSL 0.9.6i:
-
-      o Important security related bugfixes.
-
-  Major changes between OpenSSL 0.9.6g and OpenSSL 0.9.6h:
-
-      o New configuration targets for Tandem OSS and A/UX.
-      o New OIDs for Microsoft attributes.
-      o Better handling of SSL session caching.
-      o Better comparison of distinguished names.
-      o Better handling of shared libraries in a mixed GNU/non-GNU environment.
-      o Support assembler code with Borland C.
-      o Fixes for length problems.
-      o Fixes for uninitialised variables.
-      o Fixes for memory leaks, some unusual crashes and some race conditions.
-      o Fixes for smaller building problems.
-      o Updates of manuals, FAQ and other instructive documents.
-
-  Major changes between OpenSSL 0.9.6f and OpenSSL 0.9.6g:
-
-      o Important building fixes on Unix.
-
-  Major changes between OpenSSL 0.9.6e and OpenSSL 0.9.6f:
-
-      o Various important bugfixes.
-
-  Major changes between OpenSSL 0.9.6d and OpenSSL 0.9.6e:
-
-      o Important security related bugfixes.
-      o Various SSL/TLS library bugfixes.
-
   Major changes between OpenSSL 0.9.6c and OpenSSL 0.9.6d:
 
       o Various SSL/TLS library bugfixes.

PROBLEMS

@@ -32,27 +32,3 @@ may differ on your machine.
 As long as Apple doesn't fix the problem with ld, this problem building
 OpenSSL will remain as is.
 
-
-* Parallell make leads to errors
-
-While running tests, running a parallell make is a bad idea.  Many test
-scripts use the same name for output and input files, which means different
-will interfere with each other and lead to test failure.
-
-The solution is simple for now: don't run parallell make when testing.
-
-
-* Bugs in gcc 3.0 triggered
-
-According to a problem report, there are bugs in gcc 3.0 that are
-triggered by some of the code in OpenSSL, more specifically in
-PEM_get_EVP_CIPHER_INFO().  The triggering code is the following:
-
-	header+=11;
-	if (*header != '4') return(0); header++;
-	if (*header != ',') return(0); header++;
-
-What happens is that gcc might optimize a little too agressively, and
-you end up with an extra incrementation when *header != '4'.
-
-We recommend that you upgrade gcc to as high a 3.x version as you can.

README

@@ -1,7 +1,7 @@
 
- OpenSSL 0.9.6i Feb 19 2003
+ OpenSSL 0.9.6e [engine] 30 July 2002
 
- Copyright (c) 1998-2003 The OpenSSL Project
+ Copyright (c) 1998-2002 The OpenSSL Project
  Copyright (c) 1995-1998 Eric A. Young, Tim J. Hudson
  All rights reserved.
 

STATUS

@@ -1,16 +1,10 @@
 
   OpenSSL STATUS                           Last modified at
-  ______________                           $Date: 2003/02/19 12:34:17 $
+  ______________                           $Date: 2002/07/30 10:38:17 $
 
   DEVELOPMENT STATE
 
-    o  OpenSSL 0.9.8:  Under development...
-    o  OpenSSL 0.9.7a: Released on February  19th, 2003
-    o  OpenSSL 0.9.7:  Released on December  31st, 2002
-    o  OpenSSL 0.9.6i: Released on February  19th, 2003
-    o  OpenSSL 0.9.6h: Released on December   5th, 2002
-    o  OpenSSL 0.9.6g: Released on August     9th, 2002
-    o  OpenSSL 0.9.6f: Released on August     8th, 2002
+    o  OpenSSL 0.9.7:  Under development...
     o  OpenSSL 0.9.6e: Released on July      30th, 2002
     o  OpenSSL 0.9.6d: Released on May        9th, 2002
     o  OpenSSL 0.9.6c: Released on December  21st, 2001
@@ -27,8 +21,6 @@
 
   RELEASE SHOWSTOPPERS
 
-    o none
-
   AVAILABLE PATCHES
 
     o 

TABLE

@@ -71,7 +71,7 @@ $ranlib       =
 
 *** Cygwin
 $cc           = gcc
-$cflags       = -DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O2 -march=i486 -Wall
+$cflags       = -DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O2 -m486 -Wall
 $unistd       = 
 $thread_cflag = 
 $lflags       = 
@@ -853,7 +853,7 @@ $ranlib       =
 
 *** aix43-gcc
 $cc           = gcc
-$cflags       = -O1 -DAIX -DB_ENDIAN
+$cflags       = -O3 -DAIX -DB_ENDIAN
 $unistd       = 
 $thread_cflag = (unknown)
 $lflags       = 
@@ -989,29 +989,6 @@ $shared_ldflag =
 $shared_extension = .so
 $ranlib       = 
 
-*** aux3-gcc
-$cc           = gcc
-$cflags       = -O2 -DTERMIO
-$unistd       = 
-$thread_cflag = (unknown)
-$lflags       = -lbsd
-$bn_ops       = RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR
-$bn_obj       = 
-$des_obj      = 
-$bf_obj       = 
-$md5_obj      = 
-$sha1_obj     = 
-$cast_obj     = 
-$rc4_obj      = 
-$rmd160_obj   = 
-$rc5_obj      = 
-$dso_scheme   = 
-$shared_target= 
-$shared_cflag = 
-$shared_ldflag = 
-$shared_extension = 
-$ranlib       = 
-
 *** bsdi-elf-gcc
 $cc           = gcc
 $cflags       = -DPERL5 -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall
@@ -1267,7 +1244,7 @@ $ranlib       =
 
 *** debug-levitte-linux-elf
 $cc           = gcc
-$cflags       = -DUSE_ALLOCATING_PRINT -DRL_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DNO_ASM -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -ggdb -g3 -m486 -pedantic -ansi -Wall -Wshadow -Wstrict-prototypes -Wmissing-prototypes -pipe
+$cflags       = -DUSE_ALLOCATING_PRINT -DRL_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DNO_ASM -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -ggdb -g3 -m486 -pedantic -ansi -Wall -Wshadow -Wid-clash-31 -pipe
 $unistd       = 
 $thread_cflag = -D_REENTRANT
 $lflags       = -ldl
@@ -1282,10 +1259,10 @@ $rc4_obj      =
 $rmd160_obj   = 
 $rc5_obj      = 
 $dso_scheme   = dlfcn
-$shared_target= linux-shared
-$shared_cflag = -fPIC
+$shared_target= 
+$shared_cflag = 
 $shared_ldflag = 
-$shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
+$shared_extension = 
 $ranlib       = 
 
 *** debug-linux-elf
@@ -2440,10 +2417,10 @@ $ranlib       =
 
 *** linux-s390
 $cc           = gcc
-$cflags       = -DB_ENDIAN -DTERMIO -DNO_ASM -O3 -fomit-frame-pointer -Wall
+$cflags       = -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall
 $unistd       = 
 $thread_cflag = -D_REENTRANT
-$lflags       = -ldl
+$lflags       = 
 $bn_ops       = BN_LLONG
 $bn_obj       = 
 $des_obj      = 
@@ -2454,11 +2431,11 @@ $cast_obj     =
 $rc4_obj      = 
 $rmd160_obj   = 
 $rc5_obj      = 
-$dso_scheme   = dlfcn
-$shared_target= linux-shared
-$shared_cflag = -fPIC
+$dso_scheme   = 
+$shared_target= 
+$shared_cflag = 
 $shared_ldflag = 
-$shared_extension = .so.$(SHLIB_MAJOR),$(SHLIB_MINOR)
+$shared_extension = 
 $ranlib       = 
 
 *** linux-s390x
@@ -2466,7 +2443,7 @@ $cc           = gcc
 $cflags       = -DB_ENDIAN -DTERMIO -DNO_ASM -O3 -fomit-frame-pointer -Wall
 $unistd       = 
 $thread_cflag = -D_REENTRANT
-$lflags       = -ldl
+$lflags       = 
 $bn_ops       = SIXTY_FOUR_BIT_LONG
 $bn_obj       = 
 $des_obj      = 
@@ -2477,7 +2454,7 @@ $cast_obj     =
 $rc4_obj      = 
 $rmd160_obj   = 
 $rc5_obj      = 
-$dso_scheme   = dlfcn
+$dso_scheme   = 
 $shared_target= linux-shared
 $shared_cflag = -fPIC
 $shared_ldflag = 
@@ -3174,29 +3151,6 @@ $shared_ldflag =
 $shared_extension = 
 $ranlib       = 
 
-*** tandem-c89
-$cc           = c89
-$cflags       = -Ww -D__TANDEM -D_XOPEN_SOURCE -D_XOPEN_SOURCE_EXTENDED=1 -D_TANDEM_SOURCE -DB_ENDIAN
-$unistd       = 
-$thread_cflag = (unknown)
-$lflags       = 
-$bn_ops       = THIRTY_TWO_BIT
-$bn_obj       = 
-$des_obj      = 
-$bf_obj       = 
-$md5_obj      = 
-$sha1_obj     = 
-$cast_obj     = 
-$rc4_obj      = 
-$rmd160_obj   = 
-$rc5_obj      = 
-$dso_scheme   = 
-$shared_target= 
-$shared_cflag = 
-$shared_ldflag = 
-$shared_extension = 
-$ranlib       = 
-
 *** ultrix-cc
 $cc           = cc
 $cflags       = -std1 -O -Olimit 1000 -DL_ENDIAN

apps/Makefile.ssl

@@ -117,7 +117,7 @@ lint:
 	lint -DLINT $(INCLUDES) $(SRC)>fluff
 
 depend:
-	$(MAKEDEPEND) -- $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(SRC)
+	$(MAKEDEPEND) $(INCLUDES) $(DEPFLAG) $(PROGS) $(SRC)
 
 dclean:
 	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
@@ -128,10 +128,10 @@ clean:
 	rm -f req
 
 $(DLIBSSL):
-	(cd ..; $(MAKE) DIRS=ssl all)
+	(cd ../ssl; $(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' TESTS='${TESTS}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}')
 
 $(DLIBCRYPTO):
-	(cd ..; $(MAKE) DIRS=crypto all)
+	(cd ../crypto; $(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' TESTS='${TESTS}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}')
 
 $(PROGRAM): progs.h $(E_OBJ) $(PROGRAM).o $(DLIBCRYPTO) $(DLIBSSL)
 	$(RM) $(PROGRAM)
@@ -209,14 +209,15 @@ ca.o: ../include/openssl/buffer.h ../include/openssl/cast.h
 ca.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 ca.o: ../include/openssl/des.h ../include/openssl/dh.h ../include/openssl/dsa.h
 ca.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-ca.o: ../include/openssl/err.h ../include/openssl/evp.h
-ca.o: ../include/openssl/idea.h ../include/openssl/lhash.h
-ca.o: ../include/openssl/md2.h ../include/openssl/md4.h
-ca.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
-ca.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-ca.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-ca.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-ca.o: ../include/openssl/pkcs7.h ../include/openssl/rc2.h
+ca.o: ../include/openssl/engine.h ../include/openssl/err.h
+ca.o: ../include/openssl/evp.h ../include/openssl/idea.h
+ca.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+ca.o: ../include/openssl/md4.h ../include/openssl/md5.h
+ca.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+ca.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+ca.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
+ca.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+ca.o: ../include/openssl/rand.h ../include/openssl/rc2.h
 ca.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
 ca.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
 ca.o: ../include/openssl/safestack.h ../include/openssl/sha.h
@@ -292,14 +293,15 @@ dgst.o: ../include/openssl/buffer.h ../include/openssl/cast.h
 dgst.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 dgst.o: ../include/openssl/des.h ../include/openssl/dh.h
 dgst.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
-dgst.o: ../include/openssl/e_os2.h ../include/openssl/err.h
-dgst.o: ../include/openssl/evp.h ../include/openssl/idea.h
-dgst.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-dgst.o: ../include/openssl/md4.h ../include/openssl/md5.h
-dgst.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-dgst.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-dgst.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-dgst.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+dgst.o: ../include/openssl/e_os2.h ../include/openssl/engine.h
+dgst.o: ../include/openssl/err.h ../include/openssl/evp.h
+dgst.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+dgst.o: ../include/openssl/md2.h ../include/openssl/md4.h
+dgst.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+dgst.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+dgst.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+dgst.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+dgst.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
 dgst.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
 dgst.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
 dgst.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
@@ -312,14 +314,15 @@ dh.o: ../include/openssl/buffer.h ../include/openssl/cast.h
 dh.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 dh.o: ../include/openssl/des.h ../include/openssl/dh.h ../include/openssl/dsa.h
 dh.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-dh.o: ../include/openssl/err.h ../include/openssl/evp.h
-dh.o: ../include/openssl/idea.h ../include/openssl/lhash.h
-dh.o: ../include/openssl/md2.h ../include/openssl/md4.h
-dh.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
-dh.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-dh.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-dh.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-dh.o: ../include/openssl/pkcs7.h ../include/openssl/rc2.h
+dh.o: ../include/openssl/engine.h ../include/openssl/err.h
+dh.o: ../include/openssl/evp.h ../include/openssl/idea.h
+dh.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+dh.o: ../include/openssl/md4.h ../include/openssl/md5.h
+dh.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+dh.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+dh.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
+dh.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+dh.o: ../include/openssl/rand.h ../include/openssl/rc2.h
 dh.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
 dh.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
 dh.o: ../include/openssl/safestack.h ../include/openssl/sha.h
@@ -331,14 +334,15 @@ dsa.o: ../include/openssl/buffer.h ../include/openssl/cast.h
 dsa.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 dsa.o: ../include/openssl/des.h ../include/openssl/dh.h
 dsa.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
-dsa.o: ../include/openssl/e_os2.h ../include/openssl/err.h
-dsa.o: ../include/openssl/evp.h ../include/openssl/idea.h
-dsa.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-dsa.o: ../include/openssl/md4.h ../include/openssl/md5.h
-dsa.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-dsa.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-dsa.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-dsa.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+dsa.o: ../include/openssl/e_os2.h ../include/openssl/engine.h
+dsa.o: ../include/openssl/err.h ../include/openssl/evp.h
+dsa.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+dsa.o: ../include/openssl/md2.h ../include/openssl/md4.h
+dsa.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+dsa.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+dsa.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+dsa.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+dsa.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
 dsa.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
 dsa.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
 dsa.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
@@ -371,20 +375,21 @@ enc.o: ../include/openssl/buffer.h ../include/openssl/cast.h
 enc.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 enc.o: ../include/openssl/des.h ../include/openssl/dh.h
 enc.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
-enc.o: ../include/openssl/e_os2.h ../include/openssl/err.h
-enc.o: ../include/openssl/evp.h ../include/openssl/idea.h
-enc.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-enc.o: ../include/openssl/md4.h ../include/openssl/md5.h
-enc.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-enc.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-enc.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-enc.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-enc.o: ../include/openssl/rand.h ../include/openssl/rc2.h
-enc.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
-enc.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
-enc.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-enc.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-enc.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+enc.o: ../include/openssl/e_os2.h ../include/openssl/engine.h
+enc.o: ../include/openssl/err.h ../include/openssl/evp.h
+enc.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+enc.o: ../include/openssl/md2.h ../include/openssl/md4.h
+enc.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+enc.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+enc.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+enc.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+enc.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
+enc.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
+enc.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
+enc.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
+enc.o: ../include/openssl/sha.h ../include/openssl/stack.h
+enc.o: ../include/openssl/symhacks.h ../include/openssl/x509.h
+enc.o: ../include/openssl/x509_vfy.h apps.h
 errstr.o: ../include/openssl/asn1.h ../include/openssl/bio.h
 errstr.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
 errstr.o: ../include/openssl/buffer.h ../include/openssl/cast.h
@@ -414,34 +419,36 @@ gendh.o: ../include/openssl/buffer.h ../include/openssl/cast.h
 gendh.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 gendh.o: ../include/openssl/des.h ../include/openssl/dh.h
 gendh.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
-gendh.o: ../include/openssl/e_os2.h ../include/openssl/err.h
-gendh.o: ../include/openssl/evp.h ../include/openssl/idea.h
-gendh.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-gendh.o: ../include/openssl/md4.h ../include/openssl/md5.h
-gendh.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-gendh.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-gendh.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-gendh.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-gendh.o: ../include/openssl/rand.h ../include/openssl/rc2.h
-gendh.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
-gendh.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
-gendh.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-gendh.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-gendh.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+gendh.o: ../include/openssl/e_os2.h ../include/openssl/engine.h
+gendh.o: ../include/openssl/err.h ../include/openssl/evp.h
+gendh.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+gendh.o: ../include/openssl/md2.h ../include/openssl/md4.h
+gendh.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+gendh.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+gendh.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+gendh.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+gendh.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
+gendh.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
+gendh.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
+gendh.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
+gendh.o: ../include/openssl/sha.h ../include/openssl/stack.h
+gendh.o: ../include/openssl/symhacks.h ../include/openssl/x509.h
+gendh.o: ../include/openssl/x509_vfy.h apps.h
 gendsa.o: ../include/openssl/asn1.h ../include/openssl/bio.h
 gendsa.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
 gendsa.o: ../include/openssl/buffer.h ../include/openssl/cast.h
 gendsa.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 gendsa.o: ../include/openssl/des.h ../include/openssl/dh.h
 gendsa.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
-gendsa.o: ../include/openssl/e_os2.h ../include/openssl/err.h
-gendsa.o: ../include/openssl/evp.h ../include/openssl/idea.h
-gendsa.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-gendsa.o: ../include/openssl/md4.h ../include/openssl/md5.h
-gendsa.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-gendsa.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-gendsa.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-gendsa.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+gendsa.o: ../include/openssl/e_os2.h ../include/openssl/engine.h
+gendsa.o: ../include/openssl/err.h ../include/openssl/evp.h
+gendsa.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+gendsa.o: ../include/openssl/md2.h ../include/openssl/md4.h
+gendsa.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+gendsa.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+gendsa.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+gendsa.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+gendsa.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
 gendsa.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
 gendsa.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
 gendsa.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
@@ -454,14 +461,15 @@ genrsa.o: ../include/openssl/buffer.h ../include/openssl/cast.h
 genrsa.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 genrsa.o: ../include/openssl/des.h ../include/openssl/dh.h
 genrsa.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
-genrsa.o: ../include/openssl/e_os2.h ../include/openssl/err.h
-genrsa.o: ../include/openssl/evp.h ../include/openssl/idea.h
-genrsa.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-genrsa.o: ../include/openssl/md4.h ../include/openssl/md5.h
-genrsa.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-genrsa.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-genrsa.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-genrsa.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+genrsa.o: ../include/openssl/e_os2.h ../include/openssl/engine.h
+genrsa.o: ../include/openssl/err.h ../include/openssl/evp.h
+genrsa.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+genrsa.o: ../include/openssl/md2.h ../include/openssl/md4.h
+genrsa.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+genrsa.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+genrsa.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+genrsa.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+genrsa.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
 genrsa.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
 genrsa.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
 genrsa.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
@@ -536,15 +544,16 @@ pkcs12.o: ../include/openssl/buffer.h ../include/openssl/cast.h
 pkcs12.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 pkcs12.o: ../include/openssl/des.h ../include/openssl/dh.h
 pkcs12.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
-pkcs12.o: ../include/openssl/e_os2.h ../include/openssl/err.h
-pkcs12.o: ../include/openssl/evp.h ../include/openssl/idea.h
-pkcs12.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-pkcs12.o: ../include/openssl/md4.h ../include/openssl/md5.h
-pkcs12.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-pkcs12.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-pkcs12.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-pkcs12.o: ../include/openssl/pem2.h ../include/openssl/pkcs12.h
-pkcs12.o: ../include/openssl/pkcs7.h ../include/openssl/rc2.h
+pkcs12.o: ../include/openssl/e_os2.h ../include/openssl/engine.h
+pkcs12.o: ../include/openssl/err.h ../include/openssl/evp.h
+pkcs12.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+pkcs12.o: ../include/openssl/md2.h ../include/openssl/md4.h
+pkcs12.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+pkcs12.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+pkcs12.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+pkcs12.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+pkcs12.o: ../include/openssl/pkcs12.h ../include/openssl/pkcs7.h
+pkcs12.o: ../include/openssl/rand.h ../include/openssl/rc2.h
 pkcs12.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
 pkcs12.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
 pkcs12.o: ../include/openssl/safestack.h ../include/openssl/sha.h
@@ -556,14 +565,15 @@ pkcs7.o: ../include/openssl/buffer.h ../include/openssl/cast.h
 pkcs7.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 pkcs7.o: ../include/openssl/des.h ../include/openssl/dh.h
 pkcs7.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
-pkcs7.o: ../include/openssl/e_os2.h ../include/openssl/err.h
-pkcs7.o: ../include/openssl/evp.h ../include/openssl/idea.h
-pkcs7.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-pkcs7.o: ../include/openssl/md4.h ../include/openssl/md5.h
-pkcs7.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-pkcs7.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-pkcs7.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-pkcs7.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+pkcs7.o: ../include/openssl/e_os2.h ../include/openssl/engine.h
+pkcs7.o: ../include/openssl/err.h ../include/openssl/evp.h
+pkcs7.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+pkcs7.o: ../include/openssl/md2.h ../include/openssl/md4.h
+pkcs7.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+pkcs7.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+pkcs7.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+pkcs7.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+pkcs7.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
 pkcs7.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
 pkcs7.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
 pkcs7.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
@@ -576,15 +586,16 @@ pkcs8.o: ../include/openssl/buffer.h ../include/openssl/cast.h
 pkcs8.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 pkcs8.o: ../include/openssl/des.h ../include/openssl/dh.h
 pkcs8.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
-pkcs8.o: ../include/openssl/e_os2.h ../include/openssl/err.h
-pkcs8.o: ../include/openssl/evp.h ../include/openssl/idea.h
-pkcs8.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-pkcs8.o: ../include/openssl/md4.h ../include/openssl/md5.h
-pkcs8.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-pkcs8.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-pkcs8.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-pkcs8.o: ../include/openssl/pem2.h ../include/openssl/pkcs12.h
-pkcs8.o: ../include/openssl/pkcs7.h ../include/openssl/rc2.h
+pkcs8.o: ../include/openssl/e_os2.h ../include/openssl/engine.h
+pkcs8.o: ../include/openssl/err.h ../include/openssl/evp.h
+pkcs8.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+pkcs8.o: ../include/openssl/md2.h ../include/openssl/md4.h
+pkcs8.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+pkcs8.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+pkcs8.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+pkcs8.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+pkcs8.o: ../include/openssl/pkcs12.h ../include/openssl/pkcs7.h
+pkcs8.o: ../include/openssl/rand.h ../include/openssl/rc2.h
 pkcs8.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
 pkcs8.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
 pkcs8.o: ../include/openssl/safestack.h ../include/openssl/sha.h
@@ -596,33 +607,35 @@ rand.o: ../include/openssl/buffer.h ../include/openssl/cast.h
 rand.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 rand.o: ../include/openssl/des.h ../include/openssl/dh.h
 rand.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
-rand.o: ../include/openssl/e_os2.h ../include/openssl/err.h
-rand.o: ../include/openssl/evp.h ../include/openssl/idea.h
-rand.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-rand.o: ../include/openssl/md4.h ../include/openssl/md5.h
-rand.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-rand.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-rand.o: ../include/openssl/opensslv.h ../include/openssl/pkcs7.h
-rand.o: ../include/openssl/rand.h ../include/openssl/rc2.h
-rand.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
-rand.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
-rand.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-rand.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-rand.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+rand.o: ../include/openssl/e_os2.h ../include/openssl/engine.h
+rand.o: ../include/openssl/err.h ../include/openssl/evp.h
+rand.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+rand.o: ../include/openssl/md2.h ../include/openssl/md4.h
+rand.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+rand.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+rand.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+rand.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
+rand.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
+rand.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
+rand.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
+rand.o: ../include/openssl/sha.h ../include/openssl/stack.h
+rand.o: ../include/openssl/symhacks.h ../include/openssl/x509.h
+rand.o: ../include/openssl/x509_vfy.h apps.h
 req.o: ../include/openssl/asn1.h ../include/openssl/bio.h
 req.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
 req.o: ../include/openssl/buffer.h ../include/openssl/cast.h
 req.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 req.o: ../include/openssl/des.h ../include/openssl/dh.h
 req.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
-req.o: ../include/openssl/e_os2.h ../include/openssl/err.h
-req.o: ../include/openssl/evp.h ../include/openssl/idea.h
-req.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-req.o: ../include/openssl/md4.h ../include/openssl/md5.h
-req.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-req.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-req.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-req.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+req.o: ../include/openssl/e_os2.h ../include/openssl/engine.h
+req.o: ../include/openssl/err.h ../include/openssl/evp.h
+req.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+req.o: ../include/openssl/md2.h ../include/openssl/md4.h
+req.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+req.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+req.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+req.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+req.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
 req.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
 req.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
 req.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
@@ -635,14 +648,15 @@ rsa.o: ../include/openssl/buffer.h ../include/openssl/cast.h
 rsa.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 rsa.o: ../include/openssl/des.h ../include/openssl/dh.h
 rsa.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
-rsa.o: ../include/openssl/e_os2.h ../include/openssl/err.h
-rsa.o: ../include/openssl/evp.h ../include/openssl/idea.h
-rsa.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-rsa.o: ../include/openssl/md4.h ../include/openssl/md5.h
-rsa.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-rsa.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-rsa.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-rsa.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+rsa.o: ../include/openssl/e_os2.h ../include/openssl/engine.h
+rsa.o: ../include/openssl/err.h ../include/openssl/evp.h
+rsa.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+rsa.o: ../include/openssl/md2.h ../include/openssl/md4.h
+rsa.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+rsa.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+rsa.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+rsa.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+rsa.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
 rsa.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
 rsa.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
 rsa.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
@@ -655,14 +669,15 @@ rsautl.o: ../include/openssl/buffer.h ../include/openssl/cast.h
 rsautl.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 rsautl.o: ../include/openssl/des.h ../include/openssl/dh.h
 rsautl.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
-rsautl.o: ../include/openssl/e_os2.h ../include/openssl/err.h
-rsautl.o: ../include/openssl/evp.h ../include/openssl/idea.h
-rsautl.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-rsautl.o: ../include/openssl/md4.h ../include/openssl/md5.h
-rsautl.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-rsautl.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-rsautl.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-rsautl.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+rsautl.o: ../include/openssl/e_os2.h ../include/openssl/engine.h
+rsautl.o: ../include/openssl/err.h ../include/openssl/evp.h
+rsautl.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+rsautl.o: ../include/openssl/md2.h ../include/openssl/md4.h
+rsautl.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+rsautl.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+rsautl.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+rsautl.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+rsautl.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
 rsautl.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
 rsautl.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
 rsautl.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
@@ -699,23 +714,23 @@ s_client.o: ../include/openssl/comp.h ../include/openssl/conf.h
 s_client.o: ../include/openssl/crypto.h ../include/openssl/des.h
 s_client.o: ../include/openssl/dh.h ../include/openssl/dsa.h
 s_client.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-s_client.o: ../include/openssl/err.h ../include/openssl/evp.h
-s_client.o: ../include/openssl/idea.h ../include/openssl/lhash.h
-s_client.o: ../include/openssl/md2.h ../include/openssl/md4.h
-s_client.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
-s_client.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-s_client.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-s_client.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-s_client.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
-s_client.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
-s_client.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
-s_client.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
-s_client.o: ../include/openssl/sha.h ../include/openssl/ssl.h
-s_client.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
-s_client.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
-s_client.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
-s_client.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
-s_client.o: s_apps.h
+s_client.o: ../include/openssl/engine.h ../include/openssl/err.h
+s_client.o: ../include/openssl/evp.h ../include/openssl/idea.h
+s_client.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+s_client.o: ../include/openssl/md4.h ../include/openssl/md5.h
+s_client.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+s_client.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+s_client.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
+s_client.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+s_client.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+s_client.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
+s_client.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
+s_client.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+s_client.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
+s_client.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
+s_client.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+s_client.o: ../include/openssl/tls1.h ../include/openssl/x509.h
+s_client.o: ../include/openssl/x509_vfy.h apps.h s_apps.h
 s_server.o: ../include/openssl/asn1.h ../include/openssl/bio.h
 s_server.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
 s_server.o: ../include/openssl/buffer.h ../include/openssl/cast.h
@@ -723,23 +738,23 @@ s_server.o: ../include/openssl/comp.h ../include/openssl/conf.h
 s_server.o: ../include/openssl/crypto.h ../include/openssl/des.h
 s_server.o: ../include/openssl/dh.h ../include/openssl/dsa.h
 s_server.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-s_server.o: ../include/openssl/err.h ../include/openssl/evp.h
-s_server.o: ../include/openssl/idea.h ../include/openssl/lhash.h
-s_server.o: ../include/openssl/md2.h ../include/openssl/md4.h
-s_server.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
-s_server.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-s_server.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-s_server.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-s_server.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
-s_server.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
-s_server.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
-s_server.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
-s_server.o: ../include/openssl/sha.h ../include/openssl/ssl.h
-s_server.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
-s_server.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
-s_server.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
-s_server.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
-s_server.o: s_apps.h
+s_server.o: ../include/openssl/engine.h ../include/openssl/err.h
+s_server.o: ../include/openssl/evp.h ../include/openssl/idea.h
+s_server.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+s_server.o: ../include/openssl/md4.h ../include/openssl/md5.h
+s_server.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+s_server.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+s_server.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
+s_server.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+s_server.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+s_server.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
+s_server.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
+s_server.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+s_server.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
+s_server.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
+s_server.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+s_server.o: ../include/openssl/tls1.h ../include/openssl/x509.h
+s_server.o: ../include/openssl/x509_vfy.h apps.h s_apps.h
 s_socket.o: ../include/openssl/asn1.h ../include/openssl/bio.h
 s_socket.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
 s_socket.o: ../include/openssl/buffer.h ../include/openssl/cast.h
@@ -815,14 +830,15 @@ smime.o: ../include/openssl/buffer.h ../include/openssl/cast.h
 smime.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 smime.o: ../include/openssl/des.h ../include/openssl/dh.h
 smime.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
-smime.o: ../include/openssl/e_os2.h ../include/openssl/err.h
-smime.o: ../include/openssl/evp.h ../include/openssl/idea.h
-smime.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-smime.o: ../include/openssl/md4.h ../include/openssl/md5.h
-smime.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-smime.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-smime.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-smime.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+smime.o: ../include/openssl/e_os2.h ../include/openssl/engine.h
+smime.o: ../include/openssl/err.h ../include/openssl/evp.h
+smime.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+smime.o: ../include/openssl/md2.h ../include/openssl/md4.h
+smime.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+smime.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+smime.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+smime.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+smime.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
 smime.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
 smime.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
 smime.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
@@ -835,34 +851,36 @@ speed.o: ../include/openssl/buffer.h ../include/openssl/cast.h
 speed.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 speed.o: ../include/openssl/des.h ../include/openssl/dh.h
 speed.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
-speed.o: ../include/openssl/e_os2.h ../include/openssl/err.h
-speed.o: ../include/openssl/evp.h ../include/openssl/hmac.h
-speed.o: ../include/openssl/idea.h ../include/openssl/lhash.h
-speed.o: ../include/openssl/md2.h ../include/openssl/md4.h
-speed.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
-speed.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-speed.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-speed.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
-speed.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
-speed.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
-speed.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
-speed.o: ../include/openssl/sha.h ../include/openssl/stack.h
-speed.o: ../include/openssl/symhacks.h ../include/openssl/x509.h
-speed.o: ../include/openssl/x509_vfy.h ./testdsa.h ./testrsa.h apps.h
+speed.o: ../include/openssl/e_os2.h ../include/openssl/engine.h
+speed.o: ../include/openssl/err.h ../include/openssl/evp.h
+speed.o: ../include/openssl/hmac.h ../include/openssl/idea.h
+speed.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+speed.o: ../include/openssl/md4.h ../include/openssl/md5.h
+speed.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+speed.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+speed.o: ../include/openssl/opensslv.h ../include/openssl/pkcs7.h
+speed.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+speed.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
+speed.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
+speed.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+speed.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+speed.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h ./testdsa.h
+speed.o: ./testrsa.h apps.h
 spkac.o: ../include/openssl/asn1.h ../include/openssl/bio.h
 spkac.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
 spkac.o: ../include/openssl/buffer.h ../include/openssl/cast.h
 spkac.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 spkac.o: ../include/openssl/des.h ../include/openssl/dh.h
 spkac.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
-spkac.o: ../include/openssl/e_os2.h ../include/openssl/err.h
-spkac.o: ../include/openssl/evp.h ../include/openssl/idea.h
-spkac.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-spkac.o: ../include/openssl/md4.h ../include/openssl/md5.h
-spkac.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-spkac.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-spkac.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-spkac.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+spkac.o: ../include/openssl/e_os2.h ../include/openssl/engine.h
+spkac.o: ../include/openssl/err.h ../include/openssl/evp.h
+spkac.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+spkac.o: ../include/openssl/md2.h ../include/openssl/md4.h
+spkac.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+spkac.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+spkac.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+spkac.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+spkac.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
 spkac.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
 spkac.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
 spkac.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
@@ -875,14 +893,15 @@ verify.o: ../include/openssl/buffer.h ../include/openssl/cast.h
 verify.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 verify.o: ../include/openssl/des.h ../include/openssl/dh.h
 verify.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
-verify.o: ../include/openssl/e_os2.h ../include/openssl/err.h
-verify.o: ../include/openssl/evp.h ../include/openssl/idea.h
-verify.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-verify.o: ../include/openssl/md4.h ../include/openssl/md5.h
-verify.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-verify.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-verify.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-verify.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+verify.o: ../include/openssl/e_os2.h ../include/openssl/engine.h
+verify.o: ../include/openssl/err.h ../include/openssl/evp.h
+verify.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+verify.o: ../include/openssl/md2.h ../include/openssl/md4.h
+verify.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+verify.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+verify.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+verify.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+verify.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
 verify.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
 verify.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
 verify.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
@@ -913,14 +932,15 @@ x509.o: ../include/openssl/buffer.h ../include/openssl/cast.h
 x509.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 x509.o: ../include/openssl/des.h ../include/openssl/dh.h
 x509.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
-x509.o: ../include/openssl/e_os2.h ../include/openssl/err.h
-x509.o: ../include/openssl/evp.h ../include/openssl/idea.h
-x509.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-x509.o: ../include/openssl/md4.h ../include/openssl/md5.h
-x509.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-x509.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-x509.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-x509.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+x509.o: ../include/openssl/e_os2.h ../include/openssl/engine.h
+x509.o: ../include/openssl/err.h ../include/openssl/evp.h
+x509.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+x509.o: ../include/openssl/md2.h ../include/openssl/md4.h
+x509.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+x509.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+x509.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+x509.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+x509.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
 x509.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
 x509.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
 x509.o: ../include/openssl/rsa.h ../include/openssl/safestack.h

apps/apps.c

@@ -170,6 +170,8 @@ int str2fmt(char *s)
 		|| (strcmp(s,"PKCS12") == 0) || (strcmp(s,"pkcs12") == 0)
 		|| (strcmp(s,"P12") == 0) || (strcmp(s,"p12") == 0))
 		return(FORMAT_PKCS12);
+	else if ((*s == 'E') || (*s == 'e'))
+		return(FORMAT_ENGINE);
 	else
 		return(FORMAT_UNDEF);
 	}

apps/apps.h

@@ -92,10 +92,8 @@ int WIN32_rename(char *oldname,char *newname);
 #define MAIN(a,v)	main(a,v)
 
 #ifndef NON_MAIN
-LHASH *config=NULL;
 BIO *bio_err=NULL;
 #else
-extern LHASH *config;
 extern BIO *bio_err;
 #endif
 
@@ -164,6 +162,8 @@ STACK_OF(X509) *load_certs(BIO *err, char *file, int format);
 #define FORMAT_NETSCAPE 4
 #define FORMAT_PKCS12   5
 #define FORMAT_SMIME    6
+/* Since this is currently inofficial, let's give it a high number */
+#define FORMAT_ENGINE   127
 
 #define NETSCAPE_CERT_HDR	"certificate"
 

apps/asn1pars.c

@@ -328,6 +328,6 @@ end:
 	if (at != NULL) ASN1_TYPE_free(at);
 	if (osk != NULL) sk_free(osk);
 	OBJ_cleanup();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 

apps/ca.c

@@ -74,6 +74,7 @@
 #include <openssl/x509v3.h>
 #include <openssl/objects.h>
 #include <openssl/pem.h>
+#include <openssl/engine.h>
 
 #ifndef W_OK
 #  ifdef VMS
@@ -167,6 +168,7 @@ static char *ca_usage[]={
 " -revoke file    - Revoke a certificate (given in file)\n",
 " -extensions ..  - Extension section (override value in config file)\n",
 " -crlexts ..     - CRL extension section (override value in config file)\n",
+" -engine e       - use engine e, possibly a hardware device.\n",
 NULL
 };
 
@@ -216,6 +218,7 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+	ENGINE *e = NULL;
 	char *key=NULL,*passargin=NULL;
 	int total=0;
 	int total_done=0;
@@ -268,6 +271,7 @@ int MAIN(int argc, char **argv)
 #define BSIZE 256
 	MS_STATIC char buf[3][BSIZE];
 	char *randfile=NULL;
+	char *engine = NULL;
 
 #ifdef EFENCE
 EF_PROTECT_FREE=1;
@@ -419,6 +423,11 @@ EF_ALIGNMENT=0;
 			if (--argc < 1) goto bad;
 			crl_ext= *(++argv);
 			}
+		else if (strcmp(*argv,"-engine") == 0)
+			{
+			if (--argc < 1) goto bad;
+			engine= *(++argv);
+			}
 		else
 			{
 bad:
@@ -439,6 +448,24 @@ bad:
 
 	ERR_load_crypto_strings();
 
+	if (engine != NULL)
+		{
+		if((e = ENGINE_by_id(engine)) == NULL)
+			{
+			BIO_printf(bio_err,"invalid engine \"%s\"\n",
+				engine);
+			goto err;
+			}
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			goto err;
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+		/* Free our "structural" reference. */
+		ENGINE_free(e);
+		}
+
 	/*****************************************************************/
 	if (configfile == NULL) configfile = getenv("OPENSSL_CONF");
 	if (configfile == NULL) configfile = getenv("SSLEAY_CONF");
@@ -543,7 +570,7 @@ bad:
 		goto err;
 		}
 		pkey=PEM_read_bio_PrivateKey(in,NULL,NULL,key);
-		if(key) OPENSSL_cleanse(key,strlen(key));
+		if(key) memset(key,0,strlen(key));
 	if (pkey == NULL)
 		{
 		BIO_printf(bio_err,"unable to load CA private key\n");
@@ -606,14 +633,12 @@ bad:
 	       that to access().  However, time's too short to do that just
 	       now.
             */
-#ifndef VXWORKS
 		if (access(outdir,R_OK|W_OK|X_OK) != 0)
 			{
 			BIO_printf(bio_err,"I am unable to access the %s directory\n",outdir);
 			perror(outdir);
 			goto err;
 			}
-#endif
 
 		if (stat(outdir,&sb) != 0)
 			{
@@ -831,14 +856,9 @@ bad:
 			}
 		if (verbose)
 			{
-			if (BN_is_zero(serial))
-				BIO_printf(bio_err,"next serial number is 00\n");
-			else
-				{
-				if ((f=BN_bn2hex(serial)) == NULL) goto err;
-				BIO_printf(bio_err,"next serial number is %s\n",f);
-				OPENSSL_free(f);
-				}
+			if ((f=BN_bn2hex(serial)) == NULL) goto err;
+			BIO_printf(bio_err,"next serial number is %s\n",f);
+			OPENSSL_free(f);
 			}
 
 		if ((attribs=CONF_get_section(conf,policy)) == NULL)
@@ -1282,7 +1302,7 @@ err:
 	X509_CRL_free(crl);
 	CONF_free(conf);
 	OBJ_cleanup();
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
 static void lookup_fail(char *name, char *tag)
@@ -1347,7 +1367,7 @@ static BIGNUM *load_serial(char *serialfile)
 	ret=ASN1_INTEGER_to_BN(ai,NULL);
 	if (ret == NULL)
 		{
-		BIO_printf(bio_err,"error converting number from bin to BIGNUM\n");
+		BIO_printf(bio_err,"error converting number from bin to BIGNUM");
 		goto err;
 		}
 err:
@@ -1735,10 +1755,7 @@ again2:
 		BIO_printf(bio_err,"The subject name appears to be ok, checking data base for clashes\n");
 
 	row[DB_name]=X509_NAME_oneline(subject,NULL,0);
-	if (BN_is_zero(serial))
-		row[DB_serial]=BUF_strdup("00");
-	else
-		row[DB_serial]=BN_bn2hex(serial);
+	row[DB_serial]=BN_bn2hex(serial);
 	if ((row[DB_name] == NULL) || (row[DB_serial] == NULL))
 		{
 		BIO_printf(bio_err,"Memory allocation failure\n");
@@ -2152,10 +2169,7 @@ static int do_revoke(X509 *x509, TXT_DB *db)
 		row[i]=NULL;
 	row[DB_name]=X509_NAME_oneline(X509_get_subject_name(x509),NULL,0);
 	bn = ASN1_INTEGER_to_BN(X509_get_serialNumber(x509),NULL);
-	if (BN_is_zero(bn))
-		row[DB_serial]=BUF_strdup("00");
-	else
-		row[DB_serial]=BN_bn2hex(bn);
+	row[DB_serial]=BN_bn2hex(bn);
 	BN_free(bn);
 	if ((row[DB_name] == NULL) || (row[DB_serial] == NULL))
 		{

apps/ciphers.c

@@ -202,6 +202,6 @@ end:
 	if (ctx != NULL) SSL_CTX_free(ctx);
 	if (ssl != NULL) SSL_free(ssl);
 	if (STDout != NULL) BIO_free_all(STDout);
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 

apps/crl.c

@@ -364,7 +364,7 @@ end:
 		X509_STORE_CTX_cleanup(&ctx);
 		X509_STORE_free(store);
 	}
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
 static X509_CRL *load_crl(char *infile, int format)

apps/crl2p7.c

@@ -166,7 +166,7 @@ bad:
 		BIO_printf(bio_err," -certfile arg  certificates file of chain to a trusted CA\n");
 		BIO_printf(bio_err,"                (can be used more than once)\n");
 		BIO_printf(bio_err," -nocrl         no crl to load, just certs from '-certfile'\n");
-		OPENSSL_EXIT(1);
+		EXIT(1);
 		}
 
 	ERR_load_crypto_strings();
@@ -278,7 +278,7 @@ end:
 	if (p7 != NULL) PKCS7_free(p7);
 	if (crl != NULL) X509_CRL_free(crl);
 
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
 /*

apps/dgst.c

@@ -66,6 +66,7 @@
 #include <openssl/objects.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
+#include <openssl/engine.h>
 
 #undef BUFSIZE
 #define BUFSIZE	1024*8
@@ -80,6 +81,7 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+	ENGINE *e = NULL;
 	unsigned char *buf=NULL;
 	int i,err=0;
 	const EVP_MD *md=NULL,*m;
@@ -97,6 +99,7 @@ int MAIN(int argc, char **argv)
 	EVP_PKEY *sigkey = NULL;
 	unsigned char *sigbuf = NULL;
 	int siglen = 0;
+	char *engine=NULL;
 
 	apps_startup();
 
@@ -154,6 +157,11 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) break;
 			sigfile=*(++argv);
 			}
+		else if (strcmp(*argv,"-engine") == 0)
+			{
+			if (--argc < 1) break;
+			engine= *(++argv);
+			}
 		else if (strcmp(*argv,"-hex") == 0)
 			out_bin = 0;
 		else if (strcmp(*argv,"-binary") == 0)
@@ -190,6 +198,7 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err,"-prverify file  verify a signature using private key in file\n");
 		BIO_printf(bio_err,"-signature file signature to verify\n");
 		BIO_printf(bio_err,"-binary         output in binary form\n");
+		BIO_printf(bio_err,"-engine e       use engine e, possibly a hardware device.\n");
 
 		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm (default)\n",
 			LN_md5,LN_md5);
@@ -209,6 +218,24 @@ int MAIN(int argc, char **argv)
 		goto end;
 		}
 
+	if (engine != NULL)
+		{
+		if((e = ENGINE_by_id(engine)) == NULL)
+			{
+			BIO_printf(bio_err,"invalid engine \"%s\"\n",
+				engine);
+			goto end;
+			}
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			goto end;
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+		/* Free our "structural" reference. */
+		ENGINE_free(e);
+		}
+
 	in=BIO_new(BIO_s_file());
 	bmd=BIO_new(BIO_f_md());
 	if (debug)
@@ -327,7 +354,7 @@ int MAIN(int argc, char **argv)
 end:
 	if (buf != NULL)
 		{
-		OPENSSL_cleanse(buf,BUFSIZE);
+		memset(buf,0,BUFSIZE);
 		OPENSSL_free(buf);
 		}
 	if (in != NULL) BIO_free(in);
@@ -335,7 +362,7 @@ end:
 	EVP_PKEY_free(sigkey);
 	if(sigbuf) OPENSSL_free(sigbuf);
 	if (bmd != NULL) BIO_free(bmd);
-	OPENSSL_EXIT(err);
+	EXIT(err);
 	}
 
 void do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,

apps/dh.c

@@ -69,6 +69,7 @@
 #include <openssl/dh.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
+#include <openssl/engine.h>
 
 #undef PROG
 #define PROG	dh_main
@@ -87,11 +88,12 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+	ENGINE *e = NULL;
 	DH *dh=NULL;
 	int i,badops=0,text=0;
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat,check=0,noout=0,C=0,ret=1;
-	char *infile,*outfile,*prog;
+	char *infile,*outfile,*prog,*engine;
 
 	apps_startup();
 
@@ -99,6 +101,7 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
+	engine=NULL;
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -129,6 +132,11 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outfile= *(++argv);
 			}
+		else if (strcmp(*argv,"-engine") == 0)
+			{
+			if (--argc < 1) goto bad;
+			engine= *(++argv);
+			}
 		else if (strcmp(*argv,"-check") == 0)
 			check=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -160,11 +168,30 @@ bad:
 		BIO_printf(bio_err," -text         print a text form of the DH parameters\n");
 		BIO_printf(bio_err," -C            Output C code\n");
 		BIO_printf(bio_err," -noout        no output\n");
+		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
 		goto end;
 		}
 
 	ERR_load_crypto_strings();
 
+	if (engine != NULL)
+		{
+		if((e = ENGINE_by_id(engine)) == NULL)
+			{
+			BIO_printf(bio_err,"invalid engine \"%s\"\n",
+				engine);
+			goto end;
+			}
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			goto end;
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+		/* Free our "structural" reference. */
+		ENGINE_free(e);
+		}
+
 	in=BIO_new(BIO_s_file());
 	out=BIO_new(BIO_s_file());
 	if ((in == NULL) || (out == NULL))
@@ -319,6 +346,6 @@ end:
 	if (in != NULL) BIO_free(in);
 	if (out != NULL) BIO_free_all(out);
 	if (dh != NULL) DH_free(dh);
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 #endif

apps/dhparam.c

@@ -121,6 +121,7 @@
 #include <openssl/dh.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
+#include <openssl/engine.h>
 
 #ifndef NO_DSA
 #include <openssl/dsa.h>
@@ -148,6 +149,7 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+	ENGINE *e = NULL;
 	DH *dh=NULL;
 	int i,badops=0,text=0;
 #ifndef NO_DSA
@@ -156,7 +158,7 @@ int MAIN(int argc, char **argv)
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat,check=0,noout=0,C=0,ret=1;
 	char *infile,*outfile,*prog;
-	char *inrand=NULL;
+	char *inrand=NULL,*engine=NULL;
 	int num = 0, g = 0;
 
 	apps_startup();
@@ -195,6 +197,11 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outfile= *(++argv);
 			}
+		else if (strcmp(*argv,"-engine") == 0)
+			{
+			if (--argc < 1) goto bad;
+			engine= *(++argv);
+			}
 		else if (strcmp(*argv,"-check") == 0)
 			check=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -240,6 +247,7 @@ bad:
 		BIO_printf(bio_err," -2            generate parameters using  2 as the generator value\n");
 		BIO_printf(bio_err," -5            generate parameters using  5 as the generator value\n");
 		BIO_printf(bio_err," numbits       number of bits in to generate (default 512)\n");
+		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"               - load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"               the random number generator\n");
@@ -249,6 +257,24 @@ bad:
 
 	ERR_load_crypto_strings();
 
+	if (engine != NULL)
+		{
+		if((e = ENGINE_by_id(engine)) == NULL)
+			{
+			BIO_printf(bio_err,"invalid engine \"%s\"\n",
+				engine);
+			goto end;
+			}
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			goto end;
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+		/* Free our "structural" reference. */
+		ENGINE_free(e);
+		}
+
 	if (g && !num)
 		num = DEFBITS;
 
@@ -506,7 +532,7 @@ end:
 	if (in != NULL) BIO_free(in);
 	if (out != NULL) BIO_free_all(out);
 	if (dh != NULL) DH_free(dh);
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
 /* dh_cb is identical to dsa_cb in apps/dsaparam.c */

apps/dsa.c

@@ -68,6 +68,7 @@
 #include <openssl/evp.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
+#include <openssl/engine.h>
 
 #undef PROG
 #define PROG	dsa_main
@@ -87,6 +88,7 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+	ENGINE *e = NULL;
 	int ret=1;
 	DSA *dsa=NULL;
 	int i,badops=0;
@@ -94,7 +96,7 @@ int MAIN(int argc, char **argv)
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat,text=0,noout=0;
 	int pubin = 0, pubout = 0;
-	char *infile,*outfile,*prog;
+	char *infile,*outfile,*prog,*engine;
 	char *passargin = NULL, *passargout = NULL;
 	char *passin = NULL, *passout = NULL;
 	int modulus=0;
@@ -105,6 +107,7 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
+	engine=NULL;
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -145,6 +148,11 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passargout= *(++argv);
 			}
+		else if (strcmp(*argv,"-engine") == 0)
+			{
+			if (--argc < 1) goto bad;
+			engine= *(++argv);
+			}
 		else if (strcmp(*argv,"-noout") == 0)
 			noout=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -176,6 +184,7 @@ bad:
 		BIO_printf(bio_err," -passin arg     input file pass phrase source\n");
 		BIO_printf(bio_err," -out arg        output file\n");
 		BIO_printf(bio_err," -passout arg    output file pass phrase source\n");
+		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
 		BIO_printf(bio_err," -des            encrypt PEM output with cbc des\n");
 		BIO_printf(bio_err," -des3           encrypt PEM output with ede cbc des using 168 bit key\n");
 #ifndef NO_IDEA
@@ -189,6 +198,24 @@ bad:
 
 	ERR_load_crypto_strings();
 
+	if (engine != NULL)
+		{
+		if((e = ENGINE_by_id(engine)) == NULL)
+			{
+			BIO_printf(bio_err,"invalid engine \"%s\"\n",
+				engine);
+			goto end;
+			}
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			goto end;
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+		/* Free our "structural" reference. */
+		ENGINE_free(e);
+		}
+
 	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
 		BIO_printf(bio_err, "Error getting passwords\n");
 		goto end;
@@ -293,6 +320,6 @@ end:
 	if(dsa != NULL) DSA_free(dsa);
 	if(passin) OPENSSL_free(passin);
 	if(passout) OPENSSL_free(passout);
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 #endif

apps/dsaparam.c

@@ -357,7 +357,7 @@ end:
 	if (in != NULL) BIO_free(in);
 	if (out != NULL) BIO_free_all(out);
 	if (dsa != NULL) DSA_free(dsa);
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
 static void MS_CALLBACK dsa_cb(int p, int n, void *arg)

apps/enc.c

@@ -70,6 +70,7 @@
 #include <openssl/md5.h>
 #endif
 #include <openssl/pem.h>
+#include <openssl/engine.h>
 
 int set_hex(char *in,unsigned char *out,int size);
 #undef SIZE
@@ -84,6 +85,7 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+	ENGINE *e = NULL;
 	static const char magic[]="Salted__";
 	char mbuf[8];	/* should be 1 smaller than magic */
 	char *strbuf=NULL;
@@ -101,6 +103,7 @@ int MAIN(int argc, char **argv)
 	BIO *in=NULL,*out=NULL,*b64=NULL,*benc=NULL,*rbio=NULL,*wbio=NULL;
 #define PROG_NAME_SIZE  39
 	char pname[PROG_NAME_SIZE+1];
+	char *engine = NULL;
 
 	apps_startup();
 
@@ -141,6 +144,11 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passarg= *(++argv);
 			}
+		else if (strcmp(*argv,"-engine") == 0)
+			{
+			if (--argc < 1) goto bad;
+			engine= *(++argv);
+			}
 		else if	(strcmp(*argv,"-d") == 0)
 			enc=0;
 		else if	(strcmp(*argv,"-p") == 0)
@@ -241,6 +249,7 @@ bad:
 			BIO_printf(bio_err,"%-14s key/iv in hex is the next argument\n","-K/-iv");
 			BIO_printf(bio_err,"%-14s print the iv/key (then exit if -P)\n","-[pP]");
 			BIO_printf(bio_err,"%-14s buffer size\n","-bufsize <n>");
+			BIO_printf(bio_err,"%-14s use engine e, possibly a hardware device.\n","-engine e");
 
 			BIO_printf(bio_err,"Cipher Types\n");
 			BIO_printf(bio_err,"des     : 56 bit key DES encryption\n");
@@ -314,6 +323,24 @@ bad:
 		argv++;
 		}
 
+	if (engine != NULL)
+		{
+		if((e = ENGINE_by_id(engine)) == NULL)
+			{
+			BIO_printf(bio_err,"invalid engine \"%s\"\n",
+				engine);
+			goto end;
+			}
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			goto end;
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+		/* Free our "structural" reference. */
+		ENGINE_free(e);
+		}
+
 	if (bufsize != NULL)
 		{
 		unsigned long n;
@@ -506,9 +533,9 @@ bad:
 			 * bug picked up by
 			 * Larry J. Hughes Jr. <hughes@indiana.edu> */
 			if (str == strbuf)
-				OPENSSL_cleanse(str,SIZE);
+				memset(str,0,SIZE);
 			else
-				OPENSSL_cleanse(str,strlen(str));
+				memset(str,0,strlen(str));
 			}
 		if ((hiv != NULL) && !set_hex(hiv,iv,8))
 			{
@@ -604,7 +631,7 @@ end:
 	if (benc != NULL) BIO_free(benc);
 	if (b64 != NULL) BIO_free(b64);
 	if(pass) OPENSSL_free(pass);
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
 int set_hex(char *in, unsigned char *out, int size)

apps/errstr.c

@@ -121,5 +121,5 @@ int MAIN(int argc, char **argv)
 			ret++;
 			}
 		}
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}

apps/gendh.c

@@ -70,6 +70,7 @@
 #include <openssl/dh.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
+#include <openssl/engine.h>
 
 #define DEFBITS	512
 #undef PROG
@@ -81,11 +82,13 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+	ENGINE *e = NULL;
 	DH *dh=NULL;
 	int ret=1,num=DEFBITS;
 	int g=2;
 	char *outfile=NULL;
 	char *inrand=NULL;
+	char *engine=NULL;
 	BIO *out=NULL;
 
 	apps_startup();
@@ -110,6 +113,11 @@ int MAIN(int argc, char **argv)
 			g=3; */
 		else if (strcmp(*argv,"-5") == 0)
 			g=5;
+		else if (strcmp(*argv,"-engine") == 0)
+			{
+			if (--argc < 1) goto bad;
+			engine= *(++argv);
+			}
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -125,15 +133,34 @@ int MAIN(int argc, char **argv)
 bad:
 		BIO_printf(bio_err,"usage: gendh [args] [numbits]\n");
 		BIO_printf(bio_err," -out file - output the key to 'file\n");
-		BIO_printf(bio_err," -2    use 2 as the generator value\n");
-	/*	BIO_printf(bio_err," -3    use 3 as the generator value\n"); */
-		BIO_printf(bio_err," -5    use 5 as the generator value\n");
+		BIO_printf(bio_err," -2        - use 2 as the generator value\n");
+	/*	BIO_printf(bio_err," -3        - use 3 as the generator value\n"); */
+		BIO_printf(bio_err," -5        - use 5 as the generator value\n");
+		BIO_printf(bio_err," -engine e - use engine e, possibly a hardware device.\n");
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"           - load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"             the random number generator\n");
 		goto end;
 		}
 		
+	if (engine != NULL)
+		{
+		if((e = ENGINE_by_id(engine)) == NULL)
+			{
+			BIO_printf(bio_err,"invalid engine \"%s\"\n",
+				engine);
+			goto end;
+			}
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			goto end;
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+		/* Free our "structural" reference. */
+		ENGINE_free(e);
+		}
+
 	out=BIO_new(BIO_s_file());
 	if (out == NULL)
 		{
@@ -184,7 +211,7 @@ end:
 		ERR_print_errors(bio_err);
 	if (out != NULL) BIO_free_all(out);
 	if (dh != NULL) DH_free(dh);
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
 static void MS_CALLBACK dh_cb(int p, int n, void *arg)

apps/gendsa.c

@@ -68,6 +68,7 @@
 #include <openssl/dsa.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
+#include <openssl/engine.h>
 
 #define DEFBITS	512
 #undef PROG
@@ -77,6 +78,7 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+	ENGINE *e = NULL;
 	DSA *dsa=NULL;
 	int ret=1;
 	char *outfile=NULL;
@@ -84,6 +86,7 @@ int MAIN(int argc, char **argv)
 	char *passargout = NULL, *passout = NULL;
 	BIO *out=NULL,*in=NULL;
 	EVP_CIPHER *enc=NULL;
+	char *engine=NULL;
 
 	apps_startup();
 
@@ -106,6 +109,11 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passargout= *(++argv);
 			}
+		else if (strcmp(*argv,"-engine") == 0)
+			{
+			if (--argc < 1) goto bad;
+			engine= *(++argv);
+			}
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -145,6 +153,7 @@ bad:
 #ifndef NO_IDEA
 		BIO_printf(bio_err," -idea     - encrypt the generated key with IDEA in cbc mode\n");
 #endif
+		BIO_printf(bio_err," -engine e - use engine e, possibly a hardware device.\n");
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"           - load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"             the random number generator\n");
@@ -153,6 +162,24 @@ bad:
 		goto end;
 		}
 
+	if (engine != NULL)
+		{
+		if((e = ENGINE_by_id(engine)) == NULL)
+			{
+			BIO_printf(bio_err,"invalid engine \"%s\"\n",
+				engine);
+			goto end;
+			}
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			goto end;
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+		/* Free our "structural" reference. */
+		ENGINE_free(e);
+		}
+
 	if(!app_passwd(bio_err, NULL, passargout, NULL, &passout)) {
 		BIO_printf(bio_err, "Error getting password\n");
 		goto end;
@@ -220,6 +247,6 @@ end:
 	if (out != NULL) BIO_free_all(out);
 	if (dsa != NULL) DSA_free(dsa);
 	if(passout) OPENSSL_free(passout);
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 #endif

apps/genrsa.c

@@ -69,6 +69,7 @@
 #include <openssl/evp.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
+#include <openssl/engine.h>
 
 #define DEFBITS	512
 #undef PROG
@@ -80,6 +81,7 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+	ENGINE *e = NULL;
 	int ret=1;
 	RSA *rsa=NULL;
 	int i,num=DEFBITS;
@@ -88,6 +90,7 @@ int MAIN(int argc, char **argv)
 	unsigned long f4=RSA_F4;
 	char *outfile=NULL;
 	char *passargout = NULL, *passout = NULL;
+	char *engine=NULL;
 	char *inrand=NULL;
 	BIO *out=NULL;
 
@@ -116,6 +119,11 @@ int MAIN(int argc, char **argv)
 			f4=3;
 		else if (strcmp(*argv,"-F4") == 0 || strcmp(*argv,"-f4") == 0)
 			f4=RSA_F4;
+		else if (strcmp(*argv,"-engine") == 0)
+			{
+			if (--argc < 1) goto bad;
+			engine= *(++argv);
+			}
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -154,6 +162,7 @@ bad:
 		BIO_printf(bio_err," -passout arg    output file pass phrase source\n");
 		BIO_printf(bio_err," -f4             use F4 (0x10001) for the E value\n");
 		BIO_printf(bio_err," -3              use 3 for the E value\n");
+		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"                 load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"                 the random number generator\n");
@@ -167,6 +176,24 @@ bad:
 		goto err;
 	}
 
+	if (engine != NULL)
+		{
+		if((e = ENGINE_by_id(engine)) == NULL)
+			{
+			BIO_printf(bio_err,"invalid engine \"%s\"\n",
+				engine);
+			goto err;
+			}
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			goto err;
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+		/* Free our "structural" reference. */
+		ENGINE_free(e);
+		}
+
 	if (outfile == NULL)
 		{
 		BIO_set_fp(out,stdout,BIO_NOCLOSE);
@@ -186,7 +213,8 @@ bad:
 			}
 		}
 
-	if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL)
+	if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL
+		&& !RAND_status())
 		{
 		BIO_printf(bio_err,"warning, not much extra random data, consider using the -rand option\n");
 		}
@@ -224,7 +252,7 @@ err:
 	if(passout) OPENSSL_free(passout);
 	if (ret != 0)
 		ERR_print_errors(bio_err);
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
 static void MS_CALLBACK genrsa_cb(int p, int n, void *arg)

apps/makeapps.com

@@ -1077,7 +1077,7 @@ $ CC = CC + "/DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS
 $!
 $! Show user the result
 $!
-$ WRITE/SYMBOL SYS$OUTPUT "Main Compiling Command: ",CC
+$ WRITE SYS$OUTPUT "Main Compiling Command: ",CC
 $!
 $! Special Threads For OpenVMS v7.1 Or Later
 $!

apps/nseq.c

@@ -102,7 +102,7 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-in file  input file\n");
 		BIO_printf (bio_err, "-out file output file\n");
 		BIO_printf (bio_err, "-toseq    output NS Sequence file\n");
-		OPENSSL_EXIT(1);
+		EXIT(1);
 	}
 
 	if (infile) {
@@ -162,6 +162,6 @@ end:
 	BIO_free_all(out);
 	NETSCAPE_CERT_SEQUENCE_free(seq);
 
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 }
 

apps/openssl.c

@@ -77,11 +77,11 @@ static unsigned long MS_CALLBACK hash(FUNCTION *a);
 static int MS_CALLBACK cmp(FUNCTION *a,FUNCTION *b);
 static LHASH *prog_init(void );
 static int do_cmd(LHASH *prog,int argc,char *argv[]);
+LHASH *config=NULL;
 char *default_config_file=NULL;
 
 /* Make sure there is only one when MONOLITH is defined */
 #ifdef MONOLITH
-LHASH *config=NULL;
 BIO *bio_err=NULL;
 #endif
 
@@ -215,7 +215,7 @@ end:
 		BIO_free(bio_err);
 		bio_err=NULL;
 		}
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
 #define LIST_STANDARD_COMMANDS "list-standard-commands"

apps/passwd.c

@@ -284,7 +284,7 @@ err:
 		BIO_free(in);
 	if (out)
 		BIO_free_all(out);
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
 
@@ -498,6 +498,6 @@ err:
 int MAIN(int argc, char **argv)
 	{
 	fputs("Program not available.\n", stderr)
-	OPENSSL_EXIT(1);
+	EXIT(1);
 	}
 #endif

apps/pkcs12.c

@@ -66,6 +66,7 @@
 #include <openssl/err.h>
 #include <openssl/pem.h>
 #include <openssl/pkcs12.h>
+#include <openssl/engine.h>
 
 #define PROG pkcs12_main
 
@@ -92,6 +93,7 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 {
+    ENGINE *e = NULL;
     char *infile=NULL, *outfile=NULL, *keyname = NULL;	
     char *certfile=NULL;
     BIO *in=NULL, *out = NULL, *inkey = NULL, *certsin = NULL;
@@ -118,6 +120,7 @@ int MAIN(int argc, char **argv)
     char *passin = NULL, *passout = NULL;
     char *inrand = NULL;
     char *CApath = NULL, *CAfile = NULL;
+    char *engine=NULL;
 
     apps_startup();
 
@@ -236,6 +239,11 @@ int MAIN(int argc, char **argv)
 			args++;	
 			CAfile = *args;
 		    } else badarg = 1;
+		} else if (!strcmp(*args,"-engine")) {
+		    if (args[1]) {
+			args++;	
+			engine = *args;
+		    } else badarg = 1;
 		} else badarg = 1;
 
 	} else badarg = 1;
@@ -279,12 +287,27 @@ int MAIN(int argc, char **argv)
 	BIO_printf (bio_err, "-password p   set import/export password source\n");
 	BIO_printf (bio_err, "-passin p     input file pass phrase source\n");
 	BIO_printf (bio_err, "-passout p    output file pass phrase source\n");
+	BIO_printf (bio_err, "-engine e     use engine e, possibly a hardware device.\n");
 	BIO_printf(bio_err,  "-rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 	BIO_printf(bio_err,  "              load the file (or the files in the directory) into\n");
 	BIO_printf(bio_err,  "              the random number generator\n");
     	goto end;
     }
 
+    if (engine != NULL) {
+	if((e = ENGINE_by_id(engine)) == NULL) {
+	    BIO_printf(bio_err,"invalid engine \"%s\"\n", engine);
+	    goto end;
+	}
+	if(!ENGINE_set_default(e, ENGINE_METHOD_ALL)) {
+	    BIO_printf(bio_err,"can't use that engine\n");
+	    goto end;
+	}
+	BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+	/* Free our "structural" reference. */
+	ENGINE_free(e);
+    }
+
     if(passarg) {
 	if(export_cert) passargout = passarg;
 	else passargin = passarg;
@@ -480,10 +503,9 @@ int MAIN(int argc, char **argv)
 		    /* Exclude verified certificate */
 		    for (i = 1; i < sk_X509_num (chain2) ; i++) 
 			sk_X509_push(certs, sk_X509_value (chain2, i));
-		    /* Free first certificate */
-		    X509_free(sk_X509_value(chain2, 0));
-		    sk_X509_free(chain2);
-		} else {
+		}
+		sk_X509_free(chain2);
+		if (vret) {
 			BIO_printf (bio_err, "Error %s getting chain.\n",
 					X509_verify_cert_error_string(vret));
 			goto export_end;
@@ -510,6 +532,8 @@ int MAIN(int argc, char **argv)
 	}
 	sk_X509_pop_free(certs, X509_free);
 	certs = NULL;
+	/* ucert is part of certs so it is already freed */
+	ucert = NULL;
 
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
@@ -597,6 +621,7 @@ int MAIN(int argc, char **argv)
 	if (certs) sk_X509_pop_free(certs, X509_free);
 	if (safes) sk_PKCS7_pop_free(safes, PKCS7_free);
 	if (bags) sk_PKCS12_SAFEBAG_pop_free(bags, PKCS12_SAFEBAG_free);
+	if (ucert) X509_free(ucert);
 
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
@@ -666,7 +691,7 @@ int MAIN(int argc, char **argv)
     if (canames) sk_free(canames);
     if(passin) OPENSSL_free(passin);
     if(passout) OPENSSL_free(passout);
-    OPENSSL_EXIT(ret);
+    EXIT(ret);
 }
 
 int dump_certs_keys_p12 (BIO *out, PKCS12 *p12, char *pass,

apps/pkcs7.c

@@ -67,6 +67,7 @@
 #include <openssl/x509.h>
 #include <openssl/pkcs7.h>
 #include <openssl/pem.h>
+#include <openssl/engine.h>
 
 #undef PROG
 #define PROG	pkcs7_main
@@ -82,6 +83,7 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+	ENGINE *e = NULL;
 	PKCS7 *p7=NULL;
 	int i,badops=0;
 	BIO *in=NULL,*out=NULL;
@@ -89,6 +91,7 @@ int MAIN(int argc, char **argv)
 	char *infile,*outfile,*prog;
 	int print_certs=0,text=0,noout=0;
 	int ret=1;
+	char *engine=NULL;
 
 	apps_startup();
 
@@ -132,6 +135,11 @@ int MAIN(int argc, char **argv)
 			text=1;
 		else if (strcmp(*argv,"-print_certs") == 0)
 			print_certs=1;
+		else if (strcmp(*argv,"-engine") == 0)
+			{
+			if (--argc < 1) goto bad;
+			engine= *(++argv);
+			}
 		else
 			{
 			BIO_printf(bio_err,"unknown option %s\n",*argv);
@@ -154,11 +162,30 @@ bad:
 		BIO_printf(bio_err," -print_certs  print any certs or crl in the input\n");
 		BIO_printf(bio_err," -text         print full details of certificates\n");
 		BIO_printf(bio_err," -noout        don't output encoded data\n");
-		OPENSSL_EXIT(1);
+		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
+		EXIT(1);
 		}
 
 	ERR_load_crypto_strings();
 
+	if (engine != NULL)
+		{
+		if((e = ENGINE_by_id(engine)) == NULL)
+			{
+			BIO_printf(bio_err,"invalid engine \"%s\"\n",
+				engine);
+			goto end;
+			}
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			goto end;
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+		/* Free our "structural" reference. */
+		ENGINE_free(e);
+		}
+
 	in=BIO_new(BIO_s_file());
 	out=BIO_new(BIO_s_file());
 	if ((in == NULL) || (out == NULL))
@@ -289,5 +316,5 @@ end:
 	if (p7 != NULL) PKCS7_free(p7);
 	if (in != NULL) BIO_free(in);
 	if (out != NULL) BIO_free_all(out);
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}

apps/pkcs8.c

@@ -62,6 +62,7 @@
 #include <openssl/err.h>
 #include <openssl/evp.h>
 #include <openssl/pkcs12.h>
+#include <openssl/engine.h>
 
 #include "apps.h"
 #define PROG pkcs8_main
@@ -70,6 +71,7 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 {
+	ENGINE *e = NULL;
 	char **args, *infile = NULL, *outfile = NULL;
 	char *passargin = NULL, *passargout = NULL;
 	BIO *in = NULL, *out = NULL;
@@ -85,9 +87,13 @@ int MAIN(int argc, char **argv)
 	EVP_PKEY *pkey;
 	char pass[50], *passin = NULL, *passout = NULL, *p8pass = NULL;
 	int badarg = 0;
+	char *engine=NULL;
+
 	if (bio_err == NULL) bio_err = BIO_new_fp (stderr, BIO_NOCLOSE);
+
 	informat=FORMAT_PEM;
 	outformat=FORMAT_PEM;
+
 	ERR_load_crypto_strings();
 	OpenSSL_add_all_algorithms();
 	args = argv + 1;
@@ -138,6 +144,11 @@ int MAIN(int argc, char **argv)
 			if (!args[1]) goto bad;
 			passargout= *(++args);
 			}
+		else if (strcmp(*args,"-engine") == 0)
+			{
+			if (!args[1]) goto bad;
+			engine= *(++args);
+			}
 		else if (!strcmp (*args, "-in")) {
 			if (args[1]) {
 				args++;
@@ -170,9 +181,28 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err, "-nocrypt        use or expect unencrypted private key\n");
 		BIO_printf(bio_err, "-v2 alg         use PKCS#5 v2.0 and cipher \"alg\"\n");
 		BIO_printf(bio_err, "-v1 obj         use PKCS#5 v1.5 and cipher \"alg\"\n");
+		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
 		return (1);
 	}
 
+	if (engine != NULL)
+		{
+		if((e = ENGINE_by_id(engine)) == NULL)
+			{
+			BIO_printf(bio_err,"invalid engine \"%s\"\n",
+				engine);
+			return (1);
+			}
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			return (1);
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+		/* Free our "structural" reference. */
+		ENGINE_free(e);
+		}
+
 	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
 		BIO_printf(bio_err, "Error getting passwords\n");
 		return (1);
@@ -236,8 +266,7 @@ int MAIN(int argc, char **argv)
 			if(passout) p8pass = passout;
 			else {
 				p8pass = pass;
-				if (EVP_read_pw_string(pass, 50, "Enter Encryption Password:", 1))
-					return (1);
+				EVP_read_pw_string(pass, 50, "Enter Encryption Password:", 1);
 			}
 			app_RAND_load_file(NULL, bio_err, 0);
 			if (!(p8 = PKCS8_encrypt(pbe_nid, cipher,

apps/rand.c

@@ -9,6 +9,7 @@
 #include <openssl/bio.h>
 #include <openssl/err.h>
 #include <openssl/rand.h>
+#include <openssl/engine.h>
 
 #undef PROG
 #define PROG rand_main
@@ -23,6 +24,7 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+	ENGINE *e = NULL;
 	int i, r, ret = 1;
 	int badopt;
 	char *outfile = NULL;
@@ -30,6 +32,7 @@ int MAIN(int argc, char **argv)
 	int base64 = 0;
 	BIO *out = NULL;
 	int num = -1;
+	char *engine=NULL;
 
 	apps_startup();
 
@@ -48,6 +51,13 @@ int MAIN(int argc, char **argv)
 			else
 				badopt = 1;
 			}
+		if (strcmp(argv[i], "-engine") == 0)
+			{
+			if ((argv[i+1] != NULL) && (engine == NULL))
+				engine = argv[++i];
+			else
+				badopt = 1;
+			}
 		else if (strcmp(argv[i], "-rand") == 0)
 			{
 			if ((argv[i+1] != NULL) && (inrand == NULL))
@@ -84,12 +94,31 @@ int MAIN(int argc, char **argv)
 		{
 		BIO_printf(bio_err, "Usage: rand [options] num\n");
 		BIO_printf(bio_err, "where options are\n");
-		BIO_printf(bio_err, "-out file            - write to file\n");
-		BIO_printf(bio_err, "-rand file%cfile%c...  - seed PRNG from files\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
-		BIO_printf(bio_err, "-base64              - encode output\n");
+		BIO_printf(bio_err, "-out file             - write to file\n");
+		BIO_printf(bio_err," -engine e             - use engine e, possibly a hardware device.\n");
+		BIO_printf(bio_err, "-rand file%cfile%c... - seed PRNG from files\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
+		BIO_printf(bio_err, "-base64               - encode output\n");
 		goto err;
 		}
 
+	if (engine != NULL)
+		{
+		if((e = ENGINE_by_id(engine)) == NULL)
+			{
+			BIO_printf(bio_err,"invalid engine \"%s\"\n",
+				engine);
+			goto err;
+			}
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			goto err;
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+		/* Free our "structural" reference. */
+		ENGINE_free(e);
+		}
+
 	app_RAND_load_file(NULL, bio_err, (inrand != NULL));
 	if (inrand != NULL)
 		BIO_printf(bio_err,"%ld semi-random bytes loaded\n",
@@ -144,5 +173,5 @@ err:
 	ERR_print_errors(bio_err);
 	if (out)
 		BIO_free_all(out);
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}

apps/req.c

@@ -73,6 +73,7 @@
 #include <openssl/x509v3.h>
 #include <openssl/objects.h>
 #include <openssl/pem.h>
+#include <openssl/engine.h>
 
 #define SECTION		"req"
 
@@ -140,6 +141,7 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+	ENGINE *e = NULL;
 #ifndef NO_DSA
 	DSA *dsa_params=NULL;
 #endif
@@ -152,6 +154,7 @@ int MAIN(int argc, char **argv)
 	int informat,outformat,verify=0,noout=0,text=0,keyform=FORMAT_PEM;
 	int nodes=0,kludge=0,newhdr=0;
 	char *infile,*outfile,*prog,*keyfile=NULL,*template=NULL,*keyout=NULL;
+	char *engine=NULL;
 	char *extensions = NULL;
 	char *req_exts = NULL;
 	EVP_CIPHER *cipher=NULL;
@@ -195,6 +198,11 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outformat=str2fmt(*(++argv));
 			}
+		else if (strcmp(*argv,"-engine") == 0)
+			{
+			if (--argc < 1) goto bad;
+			engine= *(++argv);
+			}
 		else if (strcmp(*argv,"-key") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -375,6 +383,7 @@ bad:
 		BIO_printf(bio_err," -verify        verify signature on REQ\n");
 		BIO_printf(bio_err," -modulus       RSA modulus\n");
 		BIO_printf(bio_err," -nodes         don't encrypt the output key\n");
+		BIO_printf(bio_err," -engine e      use engine e, possibly a hardware device.\n");
 		BIO_printf(bio_err," -key file	use the private key contained in file\n");
 		BIO_printf(bio_err," -keyform arg   key file format\n");
 		BIO_printf(bio_err," -keyout arg    file to send the key to\n");
@@ -422,7 +431,7 @@ bad:
 
 	if (template != NULL)
 		{
-		long errline = -1;
+		long errline;
 
 		BIO_printf(bio_err,"Using configuration from %s\n",template);
 		req_conf=CONF_load(NULL,template,&errline);
@@ -521,24 +530,55 @@ bad:
 	if ((in == NULL) || (out == NULL))
 		goto end;
 
-	if (keyfile != NULL)
+	if (engine != NULL)
 		{
-		if (BIO_read_filename(in,keyfile) <= 0)
+		if((e = ENGINE_by_id(engine)) == NULL)
 			{
-			perror(keyfile);
+			BIO_printf(bio_err,"invalid engine \"%s\"\n",
+				engine);
 			goto end;
 			}
-
-		if (keyform == FORMAT_ASN1)
-			pkey=d2i_PrivateKey_bio(in,NULL);
-		else if (keyform == FORMAT_PEM)
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
 			{
-			pkey=PEM_read_bio_PrivateKey(in,NULL,NULL,passin);
+			BIO_printf(bio_err,"can't use that engine\n");
+			goto end;
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+		/* Free our "structural" reference. */
+		ENGINE_free(e);
+		}
+
+	if (keyfile != NULL)
+		{
+		if (keyform == FORMAT_ENGINE)
+			{
+			if (!e)
+				{
+				BIO_printf(bio_err,"no engine specified\n");
+				goto end;
+				}
+			pkey = ENGINE_load_private_key(e, keyfile, NULL);
 			}
 		else
 			{
-			BIO_printf(bio_err,"bad input format specified for X509 request\n");
-			goto end;
+			if (BIO_read_filename(in,keyfile) <= 0)
+				{
+				perror(keyfile);
+				goto end;
+				}
+
+			if (keyform == FORMAT_ASN1)
+				pkey=d2i_PrivateKey_bio(in,NULL);
+			else if (keyform == FORMAT_PEM)
+				{
+				pkey=PEM_read_bio_PrivateKey(in,NULL,NULL,
+					passin);
+				}
+			else
+				{
+				BIO_printf(bio_err,"bad input format specified for X509 request\n");
+				goto end;
+				}
 			}
 
 		if (pkey == NULL)
@@ -909,7 +949,7 @@ end:
 #ifndef NO_DSA
 	if (dsa_params != NULL) DSA_free(dsa_params);
 #endif
-	OPENSSL_EXIT(ex);
+	EXIT(ex);
 	}
 
 static int make_REQ(X509_REQ *req, EVP_PKEY *pkey, int attribs)

apps/rsa.c

@@ -68,6 +68,7 @@
 #include <openssl/evp.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
+#include <openssl/engine.h>
 
 #undef PROG
 #define PROG	rsa_main
@@ -90,6 +91,7 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+	ENGINE *eng = NULL;
 	int ret=1;
 	RSA *rsa=NULL;
 	int i,badops=0, sgckey=0;
@@ -100,6 +102,7 @@ int MAIN(int argc, char **argv)
 	char *infile,*outfile,*prog;
 	char *passargin = NULL, *passargout = NULL;
 	char *passin = NULL, *passout = NULL;
+	char *engine=NULL;
 	int modulus=0;
 
 	apps_startup();
@@ -148,6 +151,11 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passargout= *(++argv);
 			}
+		else if (strcmp(*argv,"-engine") == 0)
+			{
+			if (--argc < 1) goto bad;
+			engine= *(++argv);
+			}
 		else if (strcmp(*argv,"-sgckey") == 0)
 			sgckey=1;
 		else if (strcmp(*argv,"-pubin") == 0)
@@ -195,11 +203,30 @@ bad:
 		BIO_printf(bio_err," -check          verify key consistency\n");
 		BIO_printf(bio_err," -pubin          expect a public key in input file\n");
 		BIO_printf(bio_err," -pubout         output a public key\n");
+		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
 		goto end;
 		}
 
 	ERR_load_crypto_strings();
 
+	if (engine != NULL)
+		{
+		if((eng = ENGINE_by_id(engine)) == NULL)
+			{
+			BIO_printf(bio_err,"invalid engine \"%s\"\n",
+				engine);
+			goto end;
+			}
+		if(!ENGINE_set_default(eng, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			goto end;
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+		/* Free our "structural" reference. */
+		ENGINE_free(eng);
+		}
+
 	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
 		BIO_printf(bio_err, "Error getting passwords\n");
 		goto end;
@@ -389,7 +416,7 @@ end:
 	if(rsa != NULL) RSA_free(rsa);
 	if(passin) OPENSSL_free(passin);
 	if(passout) OPENSSL_free(passout);
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 #else /* !NO_RSA */
 

apps/rsautl.c

@@ -62,6 +62,7 @@
 #include <string.h>
 #include <openssl/err.h>
 #include <openssl/pem.h>
+#include <openssl/engine.h>
 
 #define RSA_SIGN 	1
 #define RSA_VERIFY 	2
@@ -82,6 +83,7 @@ int MAIN(int argc, char **);
 
 int MAIN(int argc, char **argv)
 {
+	ENGINE *e = NULL;
 	BIO *in = NULL, *out = NULL;
 	char *infile = NULL, *outfile = NULL;
 	char *keyfile = NULL;
@@ -95,6 +97,7 @@ int MAIN(int argc, char **argv)
 	unsigned char *rsa_in = NULL, *rsa_out = NULL, pad;
 	int rsa_inlen, rsa_outlen = 0;
 	int keysize;
+	char *engine=NULL;
 
 	int ret = 1;
 
@@ -117,6 +120,9 @@ int MAIN(int argc, char **argv)
 		} else if(!strcmp(*argv, "-inkey")) {
 			if (--argc < 1) badarg = 1;
 			keyfile = *(++argv);
+		} else if(!strcmp(*argv, "-engine")) {
+			if (--argc < 1) badarg = 1;
+			engine = *(++argv);
 		} else if(!strcmp(*argv, "-pubin")) {
 			key_type = KEY_PUBKEY;
 		} else if(!strcmp(*argv, "-certin")) {
@@ -151,6 +157,24 @@ int MAIN(int argc, char **argv)
 		goto end;
 	}
 
+	if (engine != NULL)
+		{
+		if((e = ENGINE_by_id(engine)) == NULL)
+			{
+			BIO_printf(bio_err,"invalid engine \"%s\"\n",
+				engine);
+			goto end;
+			}
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			goto end;
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+		/* Free our "structural" reference. */
+		ENGINE_free(e);
+		}
+
 /* FIXME: seed PRNG only if needed */
 	app_RAND_load_file(NULL, bio_err, 0);
 	
@@ -280,6 +304,7 @@ static void usage()
 	BIO_printf(bio_err, "-inkey file     input key\n");
 	BIO_printf(bio_err, "-pubin          input is an RSA public\n");
 	BIO_printf(bio_err, "-certin         input is a certificate carrying an RSA public key\n");
+	BIO_printf(bio_err, "-engine e       use engine e, possibly a hardware device.\n");
 	BIO_printf(bio_err, "-ssl            use SSL v2 padding\n");
 	BIO_printf(bio_err, "-raw            use no padding\n");
 	BIO_printf(bio_err, "-pkcs           use PKCS#1 v1.5 padding (default)\n");

apps/s_client.c

@@ -80,6 +80,7 @@ typedef unsigned int u_int;
 #include <openssl/err.h>
 #include <openssl/pem.h>
 #include <openssl/rand.h>
+#include <openssl/engine.h>
 #include "s_apps.h"
 
 #ifdef WINDOWS
@@ -154,7 +155,7 @@ static void sc_usage(void)
 	BIO_printf(bio_err," -cipher       - preferred cipher to use, use the 'openssl ciphers'\n");
 	BIO_printf(bio_err,"                 command to see what is available\n");
 	BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
-
+	BIO_printf(bio_err," -engine id    - Initialise and use the specified engine\n");
 	}
 
 int MAIN(int, char **);
@@ -182,6 +183,8 @@ int MAIN(int argc, char **argv)
 	SSL_METHOD *meth=NULL;
 	BIO *sbio;
 	char *inrand=NULL;
+	char *engine_id=NULL;
+	ENGINE *e=NULL;
 #ifdef WINDOWS
 	struct timeval tv;
 #endif
@@ -324,6 +327,11 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			inrand= *(++argv);
 			}
+		else if	(strcmp(*argv,"-engine") == 0)
+			{
+			if (--argc < 1) goto bad;
+			engine_id = *(++argv);
+			}
 		else
 			{
 			BIO_printf(bio_err,"unknown option %s\n",*argv);
@@ -364,6 +372,30 @@ bad:
 
 	OpenSSL_add_ssl_algorithms();
 	SSL_load_error_strings();
+
+	if (engine_id != NULL)
+		{
+		if((e = ENGINE_by_id(engine_id)) == NULL)
+			{
+			BIO_printf(bio_err,"invalid engine\n");
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+		if (c_debug)
+			{
+			ENGINE_ctrl(e, ENGINE_CTRL_SET_LOGSTREAM,
+				0, bio_err, 0);
+			}
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine_id);
+		ENGINE_free(e);
+		}
+
 	ctx=SSL_CTX_new(meth);
 	if (ctx == NULL)
 		{
@@ -768,14 +800,14 @@ end:
 	if (con != NULL) SSL_free(con);
 	if (con2 != NULL) SSL_free(con2);
 	if (ctx != NULL) SSL_CTX_free(ctx);
-	if (cbuf != NULL) { OPENSSL_cleanse(cbuf,BUFSIZZ); OPENSSL_free(cbuf); }
-	if (sbuf != NULL) { OPENSSL_cleanse(sbuf,BUFSIZZ); OPENSSL_free(sbuf); }
+	if (cbuf != NULL) { memset(cbuf,0,BUFSIZZ); OPENSSL_free(cbuf); }
+	if (sbuf != NULL) { memset(sbuf,0,BUFSIZZ); OPENSSL_free(sbuf); }
 	if (bio_c_out != NULL)
 		{
 		BIO_free(bio_c_out);
 		bio_c_out=NULL;
 		}
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
 

apps/s_server.c

@@ -84,6 +84,7 @@ typedef unsigned int u_int;
 #include <openssl/x509.h>
 #include <openssl/ssl.h>
 #include <openssl/rand.h>
+#include <openssl/engine.h>
 #include "s_apps.h"
 
 #ifdef WINDOWS
@@ -177,6 +178,7 @@ static int s_debug=0;
 static int s_quiet=0;
 
 static int hack=0;
+static char *engine_id=NULL;
 
 #ifdef MONOLITH
 static void s_server_init(void)
@@ -199,6 +201,7 @@ static void s_server_init(void)
 	s_debug=0;
 	s_quiet=0;
 	hack=0;
+	engine_id=NULL;
 	}
 #endif
 
@@ -244,6 +247,7 @@ static void sv_usage(void)
 	BIO_printf(bio_err," -www          - Respond to a 'GET /' with a status page\n");
 	BIO_printf(bio_err," -WWW          - Respond to a 'GET /<path> HTTP/1.0' with file ./<path>\n");
 	BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
+	BIO_printf(bio_err," -engine id    - Initialise and use the specified engine\n");
 	}
 
 static int local_argc=0;
@@ -253,10 +257,10 @@ static char **local_argv;
 static int ebcdic_new(BIO *bi);
 static int ebcdic_free(BIO *a);
 static int ebcdic_read(BIO *b, char *out, int outl);
-static int ebcdic_write(BIO *b, const char *in, int inl);
-static long ebcdic_ctrl(BIO *b, int cmd, long num, void *ptr);
+static int ebcdic_write(BIO *b, char *in, int inl);
+static long ebcdic_ctrl(BIO *b, int cmd, long num, char *ptr);
 static int ebcdic_gets(BIO *bp, char *buf, int size);
-static int ebcdic_puts(BIO *bp, const char *str);
+static int ebcdic_puts(BIO *bp, char *str);
 
 #define BIO_TYPE_EBCDIC_FILTER	(18|0x0200)
 static BIO_METHOD methods_ebcdic=
@@ -321,7 +325,7 @@ static int ebcdic_read(BIO *b, char *out, int outl)
 	return(ret);
 }
 
-static int ebcdic_write(BIO *b, const char *in, int inl)
+static int ebcdic_write(BIO *b, char *in, int inl)
 {
 	EBCDIC_OUTBUFF *wbuf;
 	int ret=0;
@@ -354,7 +358,7 @@ static int ebcdic_write(BIO *b, const char *in, int inl)
 	return(ret);
 }
 
-static long ebcdic_ctrl(BIO *b, int cmd, long num, void *ptr)
+static long ebcdic_ctrl(BIO *b, int cmd, long num, char *ptr)
 {
 	long ret;
 
@@ -373,7 +377,7 @@ static long ebcdic_ctrl(BIO *b, int cmd, long num, void *ptr)
 
 static int ebcdic_gets(BIO *bp, char *buf, int size)
 {
-	int i, ret=0;
+	int i, ret;
 	if (bp->next_bio == NULL) return(0);
 /*	return(BIO_gets(bp->next_bio,buf,size));*/
 	for (i=0; i<size-1; ++i)
@@ -392,7 +396,7 @@ static int ebcdic_gets(BIO *bp, char *buf, int size)
 	return (ret < 0 && i == 0) ? ret : i;
 }
 
-static int ebcdic_puts(BIO *bp, const char *str)
+static int ebcdic_puts(BIO *bp, char *str)
 {
 	if (bp->next_bio == NULL) return(0);
 	return ebcdic_write(bp, str, strlen(str));
@@ -414,6 +418,8 @@ int MAIN(int argc, char *argv[])
 	int state=0;
 	SSL_METHOD *meth=NULL;
 	char *inrand=NULL;
+	char *engine=NULL;
+	ENGINE *e=NULL;
 #ifndef NO_DH
 	DH *dh=NULL;
 #endif
@@ -573,6 +579,11 @@ int MAIN(int argc, char *argv[])
 			if (--argc < 1) goto bad;
 			inrand= *(++argv);
 			}
+		else if (strcmp(*argv,"-engine") == 0)
+			{
+			if (--argc < 1) goto bad;
+			engine = *(++argv);
+			}
 		else
 			{
 			BIO_printf(bio_err,"unknown option %s\n",*argv);
@@ -624,6 +635,29 @@ bad:
 	SSL_load_error_strings();
 	OpenSSL_add_ssl_algorithms();
 
+	if (engine != NULL)
+		{
+		if((e = ENGINE_by_id(engine)) == NULL)
+			{
+			BIO_printf(bio_err,"invalid engine\n");
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+		if (s_debug)
+			{
+			ENGINE_ctrl(e, ENGINE_CTRL_SET_LOGSTREAM,
+				0, bio_err, 0);
+			}
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+		ENGINE_free(e);
+		}
+
 	ctx=SSL_CTX_new(meth);
 	if (ctx == NULL)
 		{
@@ -741,7 +775,7 @@ end:
 		BIO_free(bio_s_out);
 		bio_s_out=NULL;
 		}
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
 static void print_stats(BIO *bio, SSL_CTX *ssl_ctx)
@@ -1043,7 +1077,7 @@ err:
 	BIO_printf(bio_s_out,"CONNECTION CLOSED\n");
 	if (buf != NULL)
 		{
-		OPENSSL_cleanse(buf,bufsize);
+		memset(buf,0,bufsize);
 		OPENSSL_free(buf);
 		}
 	if (ret >= 0)
@@ -1250,7 +1284,7 @@ static int www_body(char *hostname, int s, unsigned char *context)
 			else
 				{
 				BIO_printf(bio_s_out,"read R BLOCK\n");
-#if !defined(MSDOS) && !defined(VXWORKS)
+#ifndef MSDOS
 				sleep(1);
 #endif
 				continue;

apps/s_time.c

@@ -116,11 +116,6 @@
 #include <sys/param.h>
 #endif
 
-#ifdef VXWORKS
-#include <tickLib.h>
-#undef SIGALRM
-#endif
-
 /* The following if from times(3) man page.  It may need to be changed
 */
 #ifndef HZ
@@ -466,7 +461,7 @@ int MAIN(int argc, char **argv)
 
 	if (tm_cipher == NULL ) {
 		fprintf( stderr, "No CIPHER specified\n" );
-/*		OPENSSL_EXIT(1); */
+/*		EXIT(1); */
 	}
 
 	if (!(perform & 1)) goto next;
@@ -633,7 +628,7 @@ end:
 		SSL_CTX_free(tm_ctx);
 		tm_ctx=NULL;
 		}
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
 /***********************************************************************

apps/sess_id.c

@@ -272,7 +272,7 @@ bad:
 end:
 	if (out != NULL) BIO_free_all(out);
 	if (x != NULL) SSL_SESSION_free(x);
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
 static SSL_SESSION *load_sess_id(char *infile, int format)

apps/smime.c

@@ -64,6 +64,7 @@
 #include <openssl/crypto.h>
 #include <openssl/pem.h>
 #include <openssl/err.h>
+#include <openssl/engine.h>
 
 #undef PROG
 #define PROG smime_main
@@ -81,6 +82,7 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 {
+	ENGINE *e = NULL;
 	int operation = 0;
 	int ret = 0;
 	char **args;
@@ -103,8 +105,9 @@ int MAIN(int argc, char **argv)
 	char *inrand = NULL;
 	int need_rand = 0;
 	int informat = FORMAT_SMIME, outformat = FORMAT_SMIME;
-	args = argv + 1;
+	char *engine=NULL;
 
+	args = argv + 1;
 	ret = 1;
 
 	while (!badarg && *args && *args[0] == '-') {
@@ -153,6 +156,11 @@ int MAIN(int argc, char **argv)
 				inrand = *args;
 			} else badarg = 1;
 			need_rand = 1;
+		} else if (!strcmp(*args,"-engine")) {
+			if (args[1]) {
+				args++;
+				engine = *args;
+			} else badarg = 1;
 		} else if (!strcmp(*args,"-passin")) {
 			if (args[1]) {
 				args++;
@@ -290,6 +298,7 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-text          include or delete text MIME headers\n");
 		BIO_printf (bio_err, "-CApath dir    trusted certificates directory\n");
 		BIO_printf (bio_err, "-CAfile file   trusted certificates file\n");
+		BIO_printf (bio_err, "-engine e      use engine e, possibly a hardware device.\n");
 		BIO_printf (bio_err, "-passin arg    input file pass phrase source\n");
 		BIO_printf(bio_err,  "-rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,  "               load the file (or the files in the directory) into\n");
@@ -298,6 +307,24 @@ int MAIN(int argc, char **argv)
 		goto end;
 	}
 
+	if (engine != NULL)
+		{
+		if((e = ENGINE_by_id(engine)) == NULL)
+			{
+			BIO_printf(bio_err,"invalid engine \"%s\"\n",
+				engine);
+			goto end;
+			}
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			goto end;
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+		/* Free our "structural" reference. */
+		ENGINE_free(e);
+		}
+
 	if(!app_passwd(bio_err, passargin, NULL, &passin, NULL)) {
 		BIO_printf(bio_err, "Error getting password\n");
 		goto end;

apps/speed.c

@@ -81,6 +81,7 @@
 #include <openssl/crypto.h>
 #include <openssl/rand.h>
 #include <openssl/err.h>
+#include <openssl/engine.h>
 
 #if defined(__FreeBSD__) || defined(__NetBSD__) || defined(__OpenBSD__) || defined(_DARWIN)
 # define USE_TOD
@@ -327,6 +328,7 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+	ENGINE *e;
 	unsigned char *buf=NULL,*buf2=NULL;
 	int mret=1;
 #define ALGOR_NUM	15
@@ -489,6 +491,37 @@ int MAIN(int argc, char **argv)
 		{
 		if	((argc > 0) && (strcmp(*argv,"-elapsed") == 0))
 			usertime = 0;
+		else
+		if	((argc > 0) && (strcmp(*argv,"-engine") == 0))
+			{
+			argc--;
+			argv++;
+			if(argc == 0)
+				{
+				BIO_printf(bio_err,"no engine given\n");
+				goto end;
+				}
+			if((e = ENGINE_by_id(*argv)) == NULL)
+				{
+				BIO_printf(bio_err,"invalid engine \"%s\"\n",
+					*argv);
+				goto end;
+				}
+			if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+				{
+				BIO_printf(bio_err,"can't use that engine\n");
+				goto end;
+				}
+			BIO_printf(bio_err,"engine \"%s\" set.\n", *argv);
+			/* Free our "structural" reference. */
+			ENGINE_free(e);
+			/* It will be increased again further down.  We just
+			   don't want speed to confuse an engine with an
+			   algorithm, especially when none is given (which
+			   means all of them should be run) */
+			j--;
+			}
+		else
 #ifndef NO_MD2
 		if	(strcmp(*argv,"md2") == 0) doit[D_MD2]=1;
 		else
@@ -536,7 +569,7 @@ int MAIN(int argc, char **argv)
 #ifdef RSAref
 			if (strcmp(*argv,"rsaref") == 0) 
 			{
-			RSA_set_default_method(RSA_PKCS1_RSAref());
+			RSA_set_default_openssl_method(RSA_PKCS1_RSAref());
 			j--;
 			}
 		else
@@ -544,7 +577,7 @@ int MAIN(int argc, char **argv)
 #ifndef RSA_NULL
 			if (strcmp(*argv,"openssl") == 0) 
 			{
-			RSA_set_default_method(RSA_PKCS1_SSLeay());
+			RSA_set_default_openssl_method(RSA_PKCS1_SSLeay());
 			j--;
 			}
 		else
@@ -689,11 +722,12 @@ int MAIN(int argc, char **argv)
 			BIO_printf(bio_err,"\n");
 #endif
 
-#if defined(TIMES) || defined(USE_TOD)
 			BIO_printf(bio_err,"\n");
 			BIO_printf(bio_err,"Available options:\n");
+#ifdef TIMES
 			BIO_printf(bio_err,"-elapsed        measure time in real time instead of CPU user time.\n");
 #endif
+			BIO_printf(bio_err,"-engine e       use engine e, possibly a hardware device.\n");
 			goto end;
 			}
 		argc--;
@@ -1400,6 +1434,7 @@ int MAIN(int argc, char **argv)
 #endif
 	mret=0;
 end:
+	ERR_print_errors(bio_err);
 	if (buf != NULL) OPENSSL_free(buf);
 	if (buf2 != NULL) OPENSSL_free(buf2);
 #ifndef NO_RSA
@@ -1412,7 +1447,7 @@ end:
 		if (dsa_key[i] != NULL)
 			DSA_free(dsa_key[i]);
 #endif
-	OPENSSL_EXIT(mret);
+	EXIT(mret);
 	}
 
 static void print_message(char *s, long num, int length)

apps/spkac.c

@@ -69,6 +69,7 @@
 #include <openssl/lhash.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
+#include <openssl/engine.h>
 
 #undef PROG
 #define PROG	spkac_main
@@ -81,6 +82,7 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+	ENGINE *e = NULL;
 	int i,badops=0, ret = 1;
 	BIO *in = NULL,*out = NULL, *key = NULL;
 	int verify=0,noout=0,pubkey=0;
@@ -91,6 +93,7 @@ int MAIN(int argc, char **argv)
 	LHASH *conf = NULL;
 	NETSCAPE_SPKI *spki = NULL;
 	EVP_PKEY *pkey = NULL;
+	char *engine=NULL;
 
 	apps_startup();
 
@@ -136,6 +139,11 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			spksect= *(++argv);
 			}
+		else if (strcmp(*argv,"-engine") == 0)
+			{
+			if (--argc < 1) goto bad;
+			engine= *(++argv);
+			}
 		else if (strcmp(*argv,"-noout") == 0)
 			noout=1;
 		else if (strcmp(*argv,"-pubkey") == 0)
@@ -161,6 +169,7 @@ bad:
 		BIO_printf(bio_err," -noout         don't print SPKAC\n");
 		BIO_printf(bio_err," -pubkey        output public key\n");
 		BIO_printf(bio_err," -verify        verify SPKAC signature\n");
+		BIO_printf(bio_err," -engine e      use engine e, possibly a hardware device.\n");
 		goto end;
 		}
 
@@ -170,6 +179,24 @@ bad:
 		goto end;
 	}
 
+	if (engine != NULL)
+		{
+		if((e = ENGINE_by_id(engine)) == NULL)
+			{
+			BIO_printf(bio_err,"invalid engine \"%s\"\n",
+				engine);
+			goto end;
+			}
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			goto end;
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+		/* Free our "structural" reference. */
+		ENGINE_free(e);
+		}
+
 	if(keyfile) {
 		if(strcmp(keyfile, "-")) key = BIO_new_file(keyfile, "r");
 		else key = BIO_new_fp(stdin, BIO_NOCLOSE);
@@ -288,5 +315,5 @@ end:
 	BIO_free(key);
 	EVP_PKEY_free(pkey);
 	if(passin) OPENSSL_free(passin);
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}

apps/verify.c

@@ -65,6 +65,7 @@
 #include <openssl/x509.h>
 #include <openssl/x509v3.h>
 #include <openssl/pem.h>
+#include <openssl/engine.h>
 
 #undef PROG
 #define PROG	verify_main
@@ -78,6 +79,7 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+	ENGINE *e = NULL;
 	int i,ret=1;
 	int purpose = -1;
 	char *CApath=NULL,*CAfile=NULL;
@@ -85,6 +87,7 @@ int MAIN(int argc, char **argv)
 	STACK_OF(X509) *untrusted = NULL, *trusted = NULL;
 	X509_STORE *cert_ctx=NULL;
 	X509_LOOKUP *lookup=NULL;
+	char *engine=NULL;
 
 	cert_ctx=X509_STORE_new();
 	if (cert_ctx == NULL) goto end;
@@ -137,6 +140,11 @@ int MAIN(int argc, char **argv)
 				if (argc-- < 1) goto end;
 				trustfile= *(++argv);
 				}
+			else if (strcmp(*argv,"-engine") == 0)
+				{
+				if (--argc < 1) goto end;
+				engine= *(++argv);
+				}
 			else if (strcmp(*argv,"-help") == 0)
 				goto end;
 			else if (strcmp(*argv,"-issuer_checks") == 0)
@@ -154,6 +162,24 @@ int MAIN(int argc, char **argv)
 			break;
 		}
 
+	if (engine != NULL)
+		{
+		if((e = ENGINE_by_id(engine)) == NULL)
+			{
+			BIO_printf(bio_err,"invalid engine \"%s\"\n",
+				engine);
+			goto end;
+			}
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			goto end;
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+		/* Free our "structural" reference. */
+		ENGINE_free(e);
+		}
+
 	lookup=X509_STORE_add_lookup(cert_ctx,X509_LOOKUP_file());
 	if (lookup == NULL) abort();
 	if (CAfile) {
@@ -201,7 +227,7 @@ int MAIN(int argc, char **argv)
 	ret=0;
 end:
 	if (ret == 1) {
-		BIO_printf(bio_err,"usage: verify [-verbose] [-CApath path] [-CAfile file] [-purpose purpose] cert1 cert2 ...\n");
+		BIO_printf(bio_err,"usage: verify [-verbose] [-CApath path] [-CAfile file] [-purpose purpose] [-engine e] cert1 cert2 ...\n");
 		BIO_printf(bio_err,"recognized usages:\n");
 		for(i = 0; i < X509_PURPOSE_get_count(); i++) {
 			X509_PURPOSE *ptmp;
@@ -213,7 +239,7 @@ end:
 	if (cert_ctx != NULL) X509_STORE_free(cert_ctx);
 	sk_X509_pop_free(untrusted, X509_free);
 	sk_X509_pop_free(trusted, X509_free);
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
 static int check(X509_STORE *ctx, char *file, STACK_OF(X509) *uchain, STACK_OF(X509) *tchain, int purpose)

apps/version.c

@@ -128,5 +128,5 @@ int MAIN(int argc, char **argv)
 		}
 	if (cflags)  printf("%s\n",SSLeay_version(SSLEAY_CFLAGS));
 end:
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}

apps/x509.c

@@ -73,6 +73,7 @@
 #include <openssl/x509v3.h>
 #include <openssl/objects.h>
 #include <openssl/pem.h>
+#include <openssl/engine.h>
 
 #undef PROG
 #define PROG x509_main
@@ -121,7 +122,7 @@ static char *x509_usage[]={
 " -CAkey arg      - set the CA key, must be PEM format\n",
 "                   missing, it is assumed to be in the CA file.\n",
 " -CAcreateserial - create serial number file if it does not exist\n",
-" -CAserial arg   - serial file\n",
+" -CAserial       - serial file\n",
 " -text           - print the certificate in text form\n",
 " -C              - print out C code forms\n",
 " -md2/-md5/-sha1/-mdc2 - digest to use\n",
@@ -129,6 +130,7 @@ static char *x509_usage[]={
 " -extensions     - section from config file with X509V3 extensions to add\n",
 " -clrext         - delete extensions before signing and input certificate\n",
 " -nameopt arg    - various certificate name options\n",
+" -engine e       - use engine e, possibly a hardware device.\n",
 NULL
 };
 
@@ -145,6 +147,7 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+	ENGINE *e = NULL;
 	int ret=1;
 	X509_REQ *req=NULL;
 	X509 *x=NULL,*xca=NULL;
@@ -175,6 +178,7 @@ int MAIN(int argc, char **argv)
 	int need_rand = 0;
 	int checkend=0,checkoffset=0;
 	unsigned long nmflag = 0;
+	char *engine=NULL;
 
 	reqfile=0;
 
@@ -337,6 +341,11 @@ int MAIN(int argc, char **argv)
 			alias= *(++argv);
 			trustout = 1;
 			}
+		else if (strcmp(*argv,"-engine") == 0)
+			{
+			if (--argc < 1) goto bad;
+			engine= *(++argv);
+			}
 		else if (strcmp(*argv,"-C") == 0)
 			C= ++num;
 		else if (strcmp(*argv,"-email") == 0)
@@ -420,6 +429,24 @@ bad:
 		goto end;
 		}
 
+	if (engine != NULL)
+		{
+		if((e = ENGINE_by_id(engine)) == NULL)
+			{
+			BIO_printf(bio_err,"invalid engine \"%s\"\n",
+				engine);
+			goto end;
+			}
+		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
+			{
+			BIO_printf(bio_err,"can't use that engine\n");
+			goto end;
+			}
+		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
+		/* Free our "structural" reference. */
+		ENGINE_free(e);
+		}
+
 	if (need_rand)
 		app_RAND_load_file(NULL, bio_err, 0);
 
@@ -447,7 +474,7 @@ bad:
 
 	if (extfile)
 		{
-		long errorline = -1;
+		long errorline;
 		X509V3_CTX ctx2;
 		if (!(extconf=CONF_load(NULL,extfile,&errorline)))
 			{
@@ -961,7 +988,7 @@ end:
 	sk_ASN1_OBJECT_pop_free(trust, ASN1_OBJECT_free);
 	sk_ASN1_OBJECT_pop_free(reject, ASN1_OBJECT_free);
 	if (passin) OPENSSL_free(passin);
-	OPENSSL_EXIT(ret);
+	EXIT(ret);
 	}
 
 static int x509_certify(X509_STORE *ctx, char *CAfile, const EVP_MD *digest,

config

@@ -317,10 +317,6 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
     *CRAY*)
        echo "j90-cray-unicos"; exit 0;
        ;;
-
-    NONSTOP_KERNEL*)
-       echo "nsr-tandem-nsk"; exit 0;
-       ;;
 esac
 
 #
@@ -388,9 +384,6 @@ done
 GCCVER=`(gcc -dumpversion) 2>/dev/null`
 if [ "$GCCVER" != "" ]; then
   CC=gcc
-  # then strip off whatever prefix egcs prepends the number with...
-  # Hopefully, this will work for any future prefixes as well.
-  GCCVER=`echo $GCCVER | sed 's/^[a-zA-Z]*\-//'`
   # Since gcc 3.1 gcc --version behaviour has changed.  gcc -dumpversion
   # does give us what we want though, so we use that.  We just just the
   # major and minor version numbers.
@@ -399,7 +392,6 @@ if [ "$GCCVER" != "" ]; then
 else
   CC=cc
 fi
-GCCVER=${GCCVER:-0}
 if [ "$SYSTEM" = "HP-UX" ];then
   # By default gcc is a ILP32 compiler (with long long == 64).
   GCC_BITS="32"
@@ -477,8 +469,7 @@ case "$GUESSOS" in
 	echo "WARNING! If you wish to build 64-bit library, then you have to"
 	echo "         invoke './Configure irix64-mips4-$CC' *manually*."
 	echo "         Type return if you want to continue, Ctrl-C to abort."
-	# Do not stop if /dev/tty is unavailable
-	(read waste < /dev/tty) || true
+	read waste < /dev/tty
         CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
         CPU=${CPU:-0}
         if [ $CPU -ge 5000 ]; then
@@ -533,8 +524,7 @@ EOF
 	#echo "WARNING! If you wish to build 64-bit library, then you have to"
 	#echo "         invoke './Configure linux64-sparcv9' *manually*."
 	#echo "         Type return if you want to continue, Ctrl-C to abort."
-	# Do not stop if /dev/tty is unavailable
-	#(read waste < /dev/tty) || true
+	#read waste < /dev/tty
 	OUT="linux-sparcv9" ;;
   sparc-*-linux2)
 	KARCH=`awk '/^type/{print$3}' /proc/cpuinfo`
@@ -575,8 +565,7 @@ EOF
 		echo "WARNING! If you wish to build 64-bit library, then you have to"
 		echo "         invoke './Configure solaris64-sparcv9-cc' *manually*."
 		echo "         Type return if you want to continue, Ctrl-C to abort."
-		# Do not stop if /dev/tty is unavailable
-		(read waste < /dev/tty) || true
+		read waste < /dev/tty
 	fi
 	OUT="solaris-sparcv9-$CC" ;;
   sun4m-*-solaris2)	OUT="solaris-sparcv8-$CC" ;;
@@ -637,15 +626,30 @@ EOF
   *-*-cygwin) OUT="Cygwin" ;;
   t3e-cray-unicosmk) OUT="cray-t3e" ;;
   j90-cray-unicos) OUT="cray-j90" ;;
-  nsr-tandem-nsk) OUT="tandem-c89" ;;
   *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
 esac
 
+# NB: This atalla support has been superceded by the ENGINE support
+# That contains its own header and definitions anyway. Support can
+# be enabled or disabled on any supported platform without external
+# headers, eg. by adding the "hw-atalla" switch to ./config or
+# perl Configure
+#
 # See whether we can compile Atalla support
-if [ -f /usr/include/atasi.h ]
-then
-  options="$options -DATALLA"
-fi
+#if [ -f /usr/include/atasi.h ]
+#then
+#  options="$options -DATALLA"
+#fi
+
+#get some basic shared lib support (behnke@trustcenter.de)
+case "$OUT" in
+   solaris-*-gcc)
+	if  [ "$SHARED" = "true" ] 
+	 then
+	  options="$options -DPIC -fPIC"
+        fi
+     ;;
+esac
 
 # gcc < 2.8 does not support -mcpu=ultrasparc
 if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ]

crypto/Makefile.ssl

@@ -27,15 +27,15 @@ LIBS=
 
 SDIRS=	md2 md5 sha mdc2 hmac ripemd \
 	des rc2 rc4 rc5 idea bf cast \
-	bn rsa dsa dh dso \
+	bn rsa dsa dh dso engine \
 	buffer bio stack lhash rand err objects \
 	evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp
 
 GENERAL=Makefile README crypto-lib.com install.com
 
 LIB= $(TOP)/libcrypto.a
-LIBSRC=	cryptlib.c mem.c mem_clr.c mem_dbg.c cversion.c ex_data.c tmdiff.c cpt_err.c ebcdic.c uid.c
-LIBOBJ= cryptlib.o mem.o mem_clr.o mem_dbg.o cversion.o ex_data.o tmdiff.o cpt_err.o ebcdic.o uid.o
+LIBSRC=	cryptlib.c mem.c mem_dbg.c cversion.c ex_data.c tmdiff.c cpt_err.c ebcdic.c uid.c
+LIBOBJ= cryptlib.o mem.o mem_dbg.o cversion.o ex_data.o tmdiff.o cpt_err.o ebcdic.o uid.o
 
 SRC= $(LIBSRC)
 
@@ -129,7 +129,7 @@ lint:
 
 depend:
 	if [ ! -f buildinf.h ]; then touch buildinf.h; fi # fake buildinf.h if it does not exist
-	$(MAKEDEPEND) -- $(INCLUDE) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
+	$(MAKEDEPEND) $(INCLUDE) $(DEPFLAG) $(PROGS) $(LIBSRC)
 	if [ ! -s buildinf.h ]; then rm buildinf.h; fi
 	@for i in $(SDIRS) ;\
 	do \
@@ -185,9 +185,6 @@ mem.o: ../include/openssl/e_os2.h ../include/openssl/err.h
 mem.o: ../include/openssl/lhash.h ../include/openssl/opensslconf.h
 mem.o: ../include/openssl/opensslv.h ../include/openssl/safestack.h
 mem.o: ../include/openssl/stack.h ../include/openssl/symhacks.h cryptlib.h
-mem_clr.o: ../include/openssl/crypto.h ../include/openssl/opensslv.h
-mem_clr.o: ../include/openssl/safestack.h ../include/openssl/stack.h
-mem_clr.o: ../include/openssl/symhacks.h
 mem_dbg.o: ../include/openssl/bio.h ../include/openssl/buffer.h
 mem_dbg.o: ../include/openssl/crypto.h ../include/openssl/e_os.h
 mem_dbg.o: ../include/openssl/e_os2.h ../include/openssl/err.h

crypto/asn1/Makefile.ssl

@@ -104,7 +104,7 @@ lint:
 	lint -DLINT $(INCLUDES) $(SRC)>fluff
 
 depend:
-	$(MAKEDEPEND) -- $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
+	$(MAKEDEPEND) $(INCLUDES) $(DEPFLAG) $(PROGS) $(LIBSRC)
 
 dclean:
 	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new

crypto/asn1/a_sign.c

@@ -199,10 +199,10 @@ int ASN1_sign(int (*i2d)(), X509_ALGOR *algor1, X509_ALGOR *algor2,
 	signature->flags&= ~(ASN1_STRING_FLAG_BITS_LEFT|0x07);
 	signature->flags|=ASN1_STRING_FLAG_BITS_LEFT;
 err:
-	OPENSSL_cleanse(&ctx,sizeof(ctx));
+	memset(&ctx,0,sizeof(ctx));
 	if (buf_in != NULL)
-		{ OPENSSL_cleanse((char *)buf_in,(unsigned int)inl); OPENSSL_free(buf_in); }
+		{ memset((char *)buf_in,0,(unsigned int)inl); OPENSSL_free(buf_in); }
 	if (buf_out != NULL)
-		{ OPENSSL_cleanse((char *)buf_out,outll); OPENSSL_free(buf_out); }
+		{ memset((char *)buf_out,0,outll); OPENSSL_free(buf_out); }
 	return(outl);
 	}

crypto/asn1/a_strex.c

@@ -519,7 +519,7 @@ int ASN1_STRING_to_UTF8(unsigned char **out, ASN1_STRING *in)
 {
 	ASN1_STRING stmp, *str = &stmp;
 	int mbflag, type, ret;
-	if(!in) return -1;
+	if(!*out || !in) return -1;
 	type = in->type;
 	if((type < 0) || (type > 30)) return -1;
 	mbflag = tag2nbyte[type];
@@ -528,6 +528,6 @@ int ASN1_STRING_to_UTF8(unsigned char **out, ASN1_STRING *in)
 	stmp.data = NULL;
 	ret = ASN1_mbstring_copy(&str, in->data, in->length, mbflag, B_ASN1_UTF8STRING);
 	if(ret < 0) return ret;
-	*out = stmp.data;
+	if(out) *out = stmp.data;
 	return stmp.length;
 }

crypto/asn1/a_utctm.c

@@ -246,8 +246,6 @@ ASN1_UTCTIME *ASN1_UTCTIME_set(ASN1_UTCTIME *s, time_t t)
 		ts=(struct tm *)localtime(&t);
 		}
 #endif
-	if (ts == NULL)
-		return(NULL);
 	p=(char *)s->data;
 	if ((p == NULL) || (s->length < 14))
 		{

crypto/asn1/a_verify.c

@@ -100,7 +100,7 @@ int ASN1_verify(int (*i2d)(), X509_ALGOR *a, ASN1_BIT_STRING *signature,
 	EVP_VerifyInit(&ctx,type);
 	EVP_VerifyUpdate(&ctx,(unsigned char *)buf_in,inl);
 
-	OPENSSL_cleanse(buf_in,(unsigned int)inl);
+	memset(buf_in,0,(unsigned int)inl);
 	OPENSSL_free(buf_in);
 
 	if (EVP_VerifyFinal(&ctx,(unsigned char *)signature->data,

crypto/asn1/asn1_lib.c

@@ -57,7 +57,6 @@
  */
 
 #include <stdio.h>
-#include <limits.h>
 #include "cryptlib.h"
 #include <openssl/asn1.h>
 #include <openssl/asn1_mac.h>
@@ -125,7 +124,7 @@ int ASN1_get_object(unsigned char **pp, long *plength, int *ptag, int *pclass,
 		(int)(omax+ *pp));
 
 #endif
-	if (*plength > (omax - (p - *pp)))
+	if (*plength > (omax - (*pp - p)))
 		{
 		ASN1err(ASN1_F_ASN1_GET_OBJECT,ASN1_R_TOO_LONG);
 		/* Set this so that even if things are not long enough
@@ -142,7 +141,7 @@ err:
 static int asn1_get_length(unsigned char **pp, int *inf, long *rl, int max)
 	{
 	unsigned char *p= *pp;
-	unsigned long ret=0;
+	long ret=0;
 	int i;
 
 	if (max-- < 1) return(0);
@@ -171,10 +170,10 @@ static int asn1_get_length(unsigned char **pp, int *inf, long *rl, int max)
 		else
 			ret=i;
 		}
-	if (ret > LONG_MAX)
+	if (ret < 0)
 		return 0;
 	*pp=p;
-	*rl=(long)ret;
+	*rl=ret;
 	return(1);
 	}
 

crypto/asn1/n_pkey.c

@@ -181,7 +181,7 @@ int i2d_RSA_NET(RSA *a, unsigned char **pp, int (*cb)(), int sgckey)
 	}
 		
 	EVP_BytesToKey(EVP_rc4(),EVP_md5(),NULL,buf,i,1,key,NULL);
-	OPENSSL_cleanse(buf,256);
+	memset(buf,0,256);
 
 	EVP_CIPHER_CTX_init(&ctx);
 	EVP_EncryptInit(&ctx,EVP_rc4(),key,NULL);
@@ -292,7 +292,7 @@ RSA *d2i_RSA_NET_2(RSA **a, unsigned char **pp, long length,
 	}
 		
 	EVP_BytesToKey(EVP_rc4(),EVP_md5(),NULL,buf,i,1,key,NULL);
-	OPENSSL_cleanse(buf,256);
+	memset(buf,0,256);
 
 	EVP_CIPHER_CTX_init(&ctx);
 	EVP_DecryptInit(&ctx,EVP_rc4(),key,NULL);

crypto/asn1/p8_pkey.c

@@ -119,8 +119,8 @@ void PKCS8_PRIV_KEY_INFO_free (PKCS8_PRIV_KEY_INFO *a)
 	X509_ALGOR_free(a->pkeyalg);
 	/* Clear sensitive data */
 	if (a->pkey->value.octet_string)
-		OPENSSL_cleanse(a->pkey->value.octet_string->data,
-				a->pkey->value.octet_string->length);
+		memset (a->pkey->value.octet_string->data,
+				 0, a->pkey->value.octet_string->length);
 	ASN1_TYPE_free (a->pkey);
 	sk_X509_ATTRIBUTE_pop_free (a->attributes, X509_ATTRIBUTE_free);
 	OPENSSL_free (a);

crypto/bf/Makefile.ssl

@@ -96,7 +96,7 @@ lint:
 	lint -DLINT $(INCLUDES) $(SRC)>fluff
 
 depend:
-	$(MAKEDEPEND) -- $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
+	$(MAKEDEPEND) $(INCLUDES) $(DEPFLAG) $(PROGS) $(LIBSRC)
 
 dclean:
 	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new

crypto/bf/bftest.c

@@ -63,8 +63,6 @@
 #include <string.h>
 #include <stdlib.h>
 
-#include "../e_os.h"
-
 #ifdef NO_BF
 int main(int argc, char *argv[])
 {
@@ -277,7 +275,7 @@ int main(int argc, char *argv[])
 	else
 		ret=test();
 
-	EXIT(ret);
+	exit(ret);
 	return(0);
 	}
 

crypto/bio/Makefile.ssl

@@ -78,7 +78,7 @@ lint:
 	lint -DLINT $(INCLUDES) $(SRC)>fluff
 
 depend:
-	$(MAKEDEPEND) -- $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
+	$(MAKEDEPEND) $(INCLUDES) $(DEPFLAG) $(PROGS) $(LIBSRC)
 
 dclean:
 	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new

crypto/bio/b_print.c

@@ -109,7 +109,7 @@
  * o ...                                       (for OpenSSL)
  */
 
-#ifdef HAVE_LONG_DOUBLE
+#if HAVE_LONG_DOUBLE
 #define LDOUBLE long double
 #else
 #define LDOUBLE double

crypto/bio/bio.h

@@ -241,7 +241,7 @@ typedef struct bio_method_st
 	long (_far *ctrl)();
 	int (_far *create)();
 	int (_far *destroy)();
-	long (_far *callback_ctrl)();
+	long (_fat *callback_ctrl)();
 	} BIO_METHOD;
 #endif
 

crypto/bn/Makefile.ssl

@@ -159,7 +159,7 @@ lint:
 	lint -DLINT $(INCLUDES) $(SRC)>fluff
 
 depend:
-	$(MAKEDEPEND) -- $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
+	$(MAKEDEPEND) $(INCLUDES) $(DEPFLAG) $(PROGS) $(LIBSRC)
 
 dclean:
 	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new

crypto/bn/bn.h

@@ -155,7 +155,7 @@ extern "C" {
 #define BN_BYTES	4
 #define BN_BITS2	32
 #define BN_BITS4	16
-#if defined(_MSC_VER) || defined(__BORLANDC__)
+#ifdef _MSC_VER
 /* VC++ doesn't like the LL suffix */
 #define BN_MASK		(0xffffffffffffffffL)
 #else
@@ -413,7 +413,7 @@ int BN_mod_mul_montgomery(BIGNUM *r,BIGNUM *a,BIGNUM *b,BN_MONT_CTX *mont,
 			  BN_CTX *ctx);
 int BN_from_montgomery(BIGNUM *r,BIGNUM *a,BN_MONT_CTX *mont,BN_CTX *ctx);
 void BN_MONT_CTX_free(BN_MONT_CTX *mont);
-int BN_MONT_CTX_set(BN_MONT_CTX *mont,const BIGNUM *mod,BN_CTX *ctx);
+int BN_MONT_CTX_set(BN_MONT_CTX *mont,const BIGNUM *modulus,BN_CTX *ctx);
 BN_MONT_CTX *BN_MONT_CTX_copy(BN_MONT_CTX *to,BN_MONT_CTX *from);
 
 BN_BLINDING *BN_BLINDING_new(BIGNUM *A,BIGNUM *Ai,BIGNUM *mod);

crypto/bn/bn_exp.c

@@ -113,13 +113,6 @@
 #include <stdio.h>
 #include "cryptlib.h"
 #include "bn_lcl.h"
-#ifdef ATALLA
-# include <alloca.h>
-# include <atasi.h>
-# include <assert.h>
-# include <dlfcn.h>
-#endif
-
 
 #define TABLE_SIZE	32
 
@@ -183,174 +176,6 @@ err:
 	}
 
 
-#ifdef ATALLA
-
-/*
- * This routine will dynamically check for the existance of an Atalla AXL-200
- * SSL accelerator module.  If one is found, the variable
- * asi_accelerator_present is set to 1 and the function pointers
- * ptr_ASI_xxxxxx above will be initialized to corresponding ASI API calls.
- */
-typedef int tfnASI_GetPerformanceStatistics(int reset_flag,
-					    unsigned int *ret_buf);
-typedef int tfnASI_GetHardwareConfig(long card_num, unsigned int *ret_buf);
-typedef int tfnASI_RSAPrivateKeyOpFn(RSAPrivateKey * rsaKey,
-				     unsigned char *output,
-				     unsigned char *input,
-				     unsigned int modulus_len);
-
-static tfnASI_GetHardwareConfig *ptr_ASI_GetHardwareConfig;
-static tfnASI_RSAPrivateKeyOpFn *ptr_ASI_RSAPrivateKeyOpFn;
-static tfnASI_GetPerformanceStatistics *ptr_ASI_GetPerformanceStatistics;
-static int asi_accelerator_present;
-static int tried_atalla;
-
-void atalla_initialize_accelerator_handle(void)
-	{
-	void *dl_handle;
-	int status;
-	unsigned int config_buf[1024]; 
-	static int tested;
-
-	if(tested)
-		return;
-
-	tested=1;
-
-	bzero((void *)config_buf, 1024);
-
-	/*
-	 * Check to see if the library is present on the system
-	 */
-	dl_handle = dlopen("atasi.so", RTLD_NOW);
-	if (dl_handle == (void *) NULL)
-		{
-/*		printf("atasi.so library is not present on the system\n");
-		printf("No HW acceleration available\n");*/
-		return;
-	        }
-
-	/*
-	 * The library is present.  Now we'll check to insure that the
-	 * LDM is up and running. First we'll get the address of the
-	 * function in the atasi library that we need to see if the
-	 * LDM is operating.
-	 */
-
-	ptr_ASI_GetHardwareConfig =
-	  (tfnASI_GetHardwareConfig *)dlsym(dl_handle,"ASI_GetHardwareConfig");
-
-	if (ptr_ASI_GetHardwareConfig)
-		{
-		/*
-		 * We found the call, now we'll get our config
-		 * status.  If we get a non 0 result, the LDM is not
-		 * running and we cannot use the Atalla ASI *
-		 * library.
-		 */
-		status = (*ptr_ASI_GetHardwareConfig)(0L, config_buf);
-		if (status != 0)
-			{
-			printf("atasi.so library is present but not initialized\n");
-			printf("No HW acceleration available\n");
-			return;
-			}    
-	        }
-	else
-		{
-/*		printf("We found the library, but not the function. Very Strange!\n");*/
-		return ;
-	      	}
-
-	/* 
-	 * It looks like we have acceleration capabilities.  Load up the
-	 * pointers to our ASI API calls.
-	 */
-	ptr_ASI_RSAPrivateKeyOpFn=
-	  (tfnASI_RSAPrivateKeyOpFn *)dlsym(dl_handle, "ASI_RSAPrivateKeyOpFn");
-	if (ptr_ASI_RSAPrivateKeyOpFn == NULL)
-		{
-/*		printf("We found the library, but no RSA function. Very Strange!\n");*/
-		return;
-	        }
-
-	ptr_ASI_GetPerformanceStatistics =
-	  (tfnASI_GetPerformanceStatistics *)dlsym(dl_handle, "ASI_GetPerformanceStatistics");
-	if (ptr_ASI_GetPerformanceStatistics == NULL)
-		{
-/*		printf("We found the library, but no stat function. Very Strange!\n");*/
-		return;
-	      }
-
-	/*
-	 * Indicate that acceleration is available
-	 */
-	asi_accelerator_present = 1;
-
-/*	printf("This system has acceleration!\n");*/
-
-	return;
-	}
-
-/* make sure this only gets called once when bn_mod_exp calls bn_mod_exp_mont */
-int BN_mod_exp_atalla(BIGNUM *r, BIGNUM *a, const BIGNUM *p, const BIGNUM *m)
-	{
-	unsigned char *abin;
-	unsigned char *pbin;
-	unsigned char *mbin;
-	unsigned char *rbin;
-	int an,pn,mn,ret;
-	RSAPrivateKey keydata;
-
-	atalla_initialize_accelerator_handle();
-	if(!asi_accelerator_present)
-		return 0;
-
-
-/* We should be able to run without size testing */
-# define ASIZE	128
-	an=BN_num_bytes(a);
-	pn=BN_num_bytes(p);
-	mn=BN_num_bytes(m);
-
-	if(an <= ASIZE && pn <= ASIZE && mn <= ASIZE)
-	    {
-	    int size=mn;
-
-	    assert(an <= mn);
-	    abin=alloca(size);
-	    memset(abin,'\0',mn);
-	    BN_bn2bin(a,abin+size-an);
-
-	    pbin=alloca(pn);
-	    BN_bn2bin(p,pbin);
-
-	    mbin=alloca(size);
-	    memset(mbin,'\0',mn);
-	    BN_bn2bin(m,mbin+size-mn);
-
-	    rbin=alloca(size);
-
-	    memset(&keydata,'\0',sizeof keydata);
-	    keydata.privateExponent.data=pbin;
-	    keydata.privateExponent.len=pn;
-	    keydata.modulus.data=mbin;
-	    keydata.modulus.len=size;
-
-	    ret=(*ptr_ASI_RSAPrivateKeyOpFn)(&keydata,rbin,abin,keydata.modulus.len);
-/*fprintf(stderr,"!%s\n",BN_bn2hex(a));*/
-	    if(!ret)
-	        {
-		BN_bin2bn(rbin,keydata.modulus.len,r);
-/*fprintf(stderr,"?%s\n",BN_bn2hex(r));*/
-		return 1;
-	        }
-	    }
-	return 0;
-        }
-#endif /* def ATALLA */
-
-
 int BN_mod_exp(BIGNUM *r, BIGNUM *a, const BIGNUM *p, const BIGNUM *m,
 	       BN_CTX *ctx)
 	{
@@ -360,13 +185,6 @@ int BN_mod_exp(BIGNUM *r, BIGNUM *a, const BIGNUM *p, const BIGNUM *m,
 	bn_check_top(p);
 	bn_check_top(m);
 
-#ifdef ATALLA
-	if(BN_mod_exp_atalla(r,a,p,m))
-	    return 1;
-/* If it fails, try the other methods (but don't try atalla again) */
-	tried_atalla=1;
-#endif
-
 #ifdef MONT_MUL_MOD
 	/* I have finally been able to take out this pre-condition of
 	 * the top bit being set.  It was caused by an error in BN_div
@@ -392,10 +210,6 @@ int BN_mod_exp(BIGNUM *r, BIGNUM *a, const BIGNUM *p, const BIGNUM *m,
 		{ ret=BN_mod_exp_simple(r,a,p,m,ctx); }
 #endif
 
-#ifdef ATALLA
-	tried_atalla=0;
-#endif
-
 	return(ret);
 	}
 
@@ -525,12 +339,6 @@ int BN_mod_exp_mont(BIGNUM *rr, BIGNUM *a, const BIGNUM *p,
 	bn_check_top(p);
 	bn_check_top(m);
 
-#ifdef ATALLA
-	if(!tried_atalla && BN_mod_exp_atalla(rr,a,p,m))
-	    return 1;
-/* If it fails, try the other methods */
-#endif
-
 	if (!(m->d[0] & 1))
 		{
 		BNerr(BN_F_BN_MOD_EXP_MONT,BN_R_CALLED_WITH_EVEN_MODULUS);
@@ -693,19 +501,6 @@ int BN_mod_exp_mont_word(BIGNUM *rr, BN_ULONG a, const BIGNUM *p,
 	t = BN_CTX_get(ctx);
 	if (d == NULL || r == NULL || t == NULL) goto err;
 
-#ifdef ATALLA
-	if (!tried_atalla)
-		{
-		BN_set_word(t, a);
-		if (BN_mod_exp_atalla(rr, t, p, m))
-			{
-			BN_CTX_end(ctx);
-			return 1;
-			}
-		}
-/* If it fails, try the other methods */
-#endif
-
 	if (in_mont != NULL)
 		mont=in_mont;
 	else

crypto/bn/bn_lib.c

@@ -263,12 +263,12 @@ void BN_clear_free(BIGNUM *a)
 	if (a == NULL) return;
 	if (a->d != NULL)
 		{
-		OPENSSL_cleanse(a->d,a->dmax*sizeof(a->d[0]));
+		memset(a->d,0,a->dmax*sizeof(a->d[0]));
 		if (!(BN_get_flags(a,BN_FLG_STATIC_DATA)))
 			OPENSSL_free(a->d);
 		}
 	i=BN_get_flags(a,BN_FLG_MALLOCED);
-	OPENSSL_cleanse(a,sizeof(BIGNUM));
+	memset(a,0,sizeof(BIGNUM));
 	if (i)
 		OPENSSL_free(a);
 	}

crypto/bn/bn_rand.c

@@ -201,7 +201,7 @@ static int bnrand(int pseudorand, BIGNUM *rnd, int bits, int top, int bottom)
 err:
 	if (buf != NULL)
 		{
-		OPENSSL_cleanse(buf,bytes);
+		memset(buf,0,bytes);
 		OPENSSL_free(buf);
 		}
 	return(ret);

crypto/bn/bn_word.c

@@ -123,10 +123,7 @@ int BN_add_word(BIGNUM *a, BN_ULONG w)
 	i=0;
 	for (;;)
 		{
-		if (i >= a->top)
-			l=w;
-		else
-			l=(a->d[i]+(BN_ULONG)w)&BN_MASK2;
+		l=(a->d[i]+(BN_ULONG)w)&BN_MASK2;
 		a->d[i]=l;
 		if (w > l)
 			w=1;

crypto/bn/bntest.c

@@ -139,10 +139,10 @@ int main(int argc, char *argv[])
 
 
 	ctx=BN_CTX_new();
-	if (ctx == NULL) EXIT(1);
+	if (ctx == NULL) exit(1);
 
 	out=BIO_new(BIO_s_file());
-	if (out == NULL) EXIT(1);
+	if (out == NULL) exit(1);
 	if (outfile == NULL)
 		{
 		BIO_set_fp(out,stdout,BIO_NOCLOSE);
@@ -152,7 +152,7 @@ int main(int argc, char *argv[])
 		if (!BIO_write_filename(out,outfile))
 			{
 			perror(outfile);
-			EXIT(1);
+			exit(1);
 			}
 		}
 
@@ -228,14 +228,14 @@ int main(int argc, char *argv[])
 	BIO_free(out);
 
 /**/
-	EXIT(0);
+	exit(0);
 err:
 	BIO_puts(out,"1\n"); /* make sure the Perl script fed by bc notices
 	                      * the failure, see test_bn in test/Makefile.ssl*/
 	BIO_flush(out);
 	ERR_load_crypto_strings();
 	ERR_print_errors_fp(stderr);
-	EXIT(1);
+	exit(1);
 	return(1);
 	}
 
@@ -746,7 +746,7 @@ int test_mod_mul(BIO *bp, BN_CTX *ctx)
 			while ((l=ERR_get_error()))
 				fprintf(stderr,"ERROR:%s\n",
 					ERR_error_string(l,NULL));
-			EXIT(1);
+			exit(1);
 			}
 		if (bp != NULL)
 			{

crypto/bn/exptest.c

@@ -59,9 +59,6 @@
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
-
-#include "../e_os.h"
-
 #include <openssl/bio.h>
 #include <openssl/bn.h>
 #include <openssl/rand.h>
@@ -89,7 +86,7 @@ int main(int argc, char *argv[])
 	ERR_load_BN_strings();
 
 	ctx=BN_CTX_new();
-	if (ctx == NULL) EXIT(1);
+	if (ctx == NULL) exit(1);
 	r_mont=BN_new();
 	r_recp=BN_new();
 	r_simple=BN_new();
@@ -102,7 +99,7 @@ int main(int argc, char *argv[])
 
 	out=BIO_new(BIO_s_file());
 
-	if (out == NULL) EXIT(1);
+	if (out == NULL) exit(1);
 	BIO_set_fp(out,stdout,BIO_NOCLOSE);
 
 	for (i=0; i<200; i++)
@@ -127,7 +124,7 @@ int main(int argc, char *argv[])
 			{
 			printf("BN_mod_exp_mont() problems\n");
 			ERR_print_errors(out);
-			EXIT(1);
+			exit(1);
 			}
 
 		ret=BN_mod_exp_recp(r_recp,a,b,m,ctx);
@@ -135,7 +132,7 @@ int main(int argc, char *argv[])
 			{
 			printf("BN_mod_exp_recp() problems\n");
 			ERR_print_errors(out);
-			EXIT(1);
+			exit(1);
 			}
 
 		ret=BN_mod_exp_simple(r_simple,a,b,m,ctx);
@@ -143,7 +140,7 @@ int main(int argc, char *argv[])
 			{
 			printf("BN_mod_exp_simple() problems\n");
 			ERR_print_errors(out);
-			EXIT(1);
+			exit(1);
 			}
 
 		if (BN_cmp(r_simple, r_mont) == 0
@@ -166,7 +163,7 @@ int main(int argc, char *argv[])
 			printf("\nrecp     =");	BN_print(out,r_recp);
 			printf("\nmont     ="); BN_print(out,r_mont);
 			printf("\n");
-			EXIT(1);
+			exit(1);
 			}
 		}
 	BN_free(r_mont);
@@ -180,11 +177,11 @@ int main(int argc, char *argv[])
 	CRYPTO_mem_leaks(out);
 	BIO_free(out);
 	printf(" done\n");
-	EXIT(0);
+	exit(0);
 err:
 	ERR_load_crypto_strings();
 	ERR_print_errors(out);
-	EXIT(1);
+	exit(1);
 	return(1);
 	}
 

crypto/buffer/Makefile.ssl

@@ -68,7 +68,7 @@ lint:
 	lint -DLINT $(INCLUDES) $(SRC)>fluff
 
 depend:
-	$(MAKEDEPEND) -- $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
+	$(MAKEDEPEND) $(INCLUDES) $(DEPFLAG) $(PROGS) $(LIBSRC)
 
 dclean:
 	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new

crypto/cast/Makefile.ssl

@@ -97,7 +97,7 @@ lint:
 	lint -DLINT $(INCLUDES) $(SRC)>fluff
 
 depend:
-	$(MAKEDEPEND) -- $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
+	$(MAKEDEPEND) $(INCLUDES) $(DEPFLAG) $(PROGS) $(LIBSRC)
 
 dclean:
 	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new

crypto/cast/casttest.c

@@ -60,8 +60,6 @@
 #include <string.h>
 #include <stdlib.h>
 
-#include "../e_os.h"
-
 #ifdef NO_CAST
 int main(int argc, char *argv[])
 {
@@ -226,7 +224,7 @@ int main(int argc, char *argv[])
       }
 #endif
 
-    EXIT(err);
+    exit(err);
     return(err);
     }
 #endif

crypto/comp/Makefile.ssl

@@ -71,7 +71,7 @@ lint:
 	lint -DLINT $(INCLUDES) $(SRC)>fluff
 
 depend:
-	$(MAKEDEPEND) -- $(INCLUDES) $(DEPFLAG) -- $(LIBSRC)
+	$(MAKEDEPEND) $(INCLUDES) $(DEPFLAG) $(LIBSRC)
 
 dclean:
 	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new

crypto/conf/Makefile.ssl

@@ -69,7 +69,7 @@ lint:
 	lint -DLINT $(INCLUDES) $(SRC)>fluff
 
 depend:
-	$(MAKEDEPEND) -- $(INCLUDES) $(DEPFLAG) -- $(LIBSRC)
+	$(MAKEDEPEND) $(INCLUDES) $(DEPFLAG) $(LIBSRC)
 
 dclean:
 	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new

crypto/conf/conf_def.c

@@ -224,9 +224,9 @@ static int def_load(CONF *conf, BIO *in, long *line)
 	section_sk=(STACK_OF(CONF_VALUE) *)sv->value;
 
 	bufnum=0;
-	again=0;
 	for (;;)
 		{
+		again=0;
 		if (!BUF_MEM_grow(buff,bufnum+BUFSIZE))
 			{
 			CONFerr(CONF_F_CONF_LOAD_BIO,ERR_R_BUF_LIB);
@@ -237,8 +237,7 @@ static int def_load(CONF *conf, BIO *in, long *line)
 		BIO_gets(in, p, BUFSIZE-1);
 		p[BUFSIZE-1]='\0';
 		ii=i=strlen(p);
-		if (i == 0 && !again) break;
-		again=0;
+		if (i == 0) break;
 		while (i > 0)
 			{
 			if ((p[i-1] != '\r') && (p[i-1] != '\n'))
@@ -248,7 +247,7 @@ static int def_load(CONF *conf, BIO *in, long *line)
 			}
 		/* we removed some trailing stuff so there is a new
 		 * line on the end. */
-		if (ii && i == ii)
+		if (i == ii)
 			again=1; /* long line */
 		else
 			{

crypto/cryptlib.c

@@ -58,7 +58,6 @@
 
 #include <stdio.h>
 #include <string.h>
-#include <assert.h>
 #include "cryptlib.h"
 #include <openssl/crypto.h>
 #include <openssl/safestack.h>
@@ -90,7 +89,6 @@ static const char* lock_names[CRYPTO_NUM_LOCKS] =
 	"ssl_session",
 	"ssl_sess_cert",
 	"ssl",
-	/* "ssl_method", */
 	"rand",
 	"rand2",
 	"debug_malloc",
@@ -103,7 +101,8 @@ static const char* lock_names[CRYPTO_NUM_LOCKS] =
 	"debug_malloc2",
 	"dso",
 	"dynlock",
-#if CRYPTO_NUM_LOCKS != 29
+	"engine",
+#if CRYPTO_NUM_LOCKS != 30
 # error "Inconsistency between crypto.h and cryptlib.c"
 #endif
 	};
@@ -206,18 +205,10 @@ int CRYPTO_get_new_dynlockid(void)
 	i=sk_CRYPTO_dynlock_find(dyn_locks,NULL);
 	/* If there was none, push, thereby creating a new one */
 	if (i == -1)
-		/* Since sk_push() returns the number of items on the
-		   stack, not the location of the pushed item, we need
-		   to transform the returned number into a position,
-		   by decreasing it.  */
-		i=sk_CRYPTO_dynlock_push(dyn_locks,pointer) - 1;
-	else
-		/* If we found a place with a NULL pointer, put our pointer
-		   in it.  */
-		sk_CRYPTO_dynlock_set(dyn_locks,i,pointer);
+		i=sk_CRYPTO_dynlock_push(dyn_locks,pointer);
 	CRYPTO_w_unlock(CRYPTO_LOCK_DYNLOCK);
 
-	if (i == -1)
+	if (!i)
 		{
 		dynlock_destroy_callback(pointer->data,__FILE__,__LINE__);
 		OPENSSL_free(pointer);
@@ -240,7 +231,7 @@ void CRYPTO_destroy_dynlockid(int i)
 	if (dyn_locks == NULL || i >= sk_CRYPTO_dynlock_num(dyn_locks))
 		{
 		CRYPTO_w_unlock(CRYPTO_LOCK_DYNLOCK);
-		return;
+ 		return;
 		}
 	pointer = sk_CRYPTO_dynlock_value(dyn_locks, i);
 	if (pointer != NULL)
@@ -409,17 +400,15 @@ void CRYPTO_lock(int mode, int type, const char *file, int line)
 #endif
 	if (type < 0)
 		{
-		if (dynlock_lock_callback != NULL)
+		struct CRYPTO_dynlock_value *pointer
+			= CRYPTO_get_dynlock_value(type);
+
+		if (pointer && dynlock_lock_callback)
 			{
-			struct CRYPTO_dynlock_value *pointer
-				= CRYPTO_get_dynlock_value(type);
-
-			assert(pointer != NULL);
-
 			dynlock_lock_callback(mode, pointer, file, line);
-
-			CRYPTO_destroy_dynlockid(type);
 			}
+
+		CRYPTO_destroy_dynlockid(type);
 		}
 	else
 		if (locking_callback != NULL)
@@ -470,7 +459,7 @@ const char *CRYPTO_get_lock_name(int type)
 		return("dynamic");
 	else if (type < CRYPTO_NUM_LOCKS)
 		return(lock_names[type]);
-	else if (type-CRYPTO_NUM_LOCKS > sk_num(app_locks))
+	else if (type-CRYPTO_NUM_LOCKS >= sk_num(app_locks))
 		return("ERROR");
 	else
 		return(sk_value(app_locks,type-CRYPTO_NUM_LOCKS));
@@ -502,3 +491,11 @@ BOOL WINAPI DLLEntryPoint(HINSTANCE hinstDLL, DWORD fdwReason,
 #endif
 
 #endif
+
+void OpenSSLDie(const char *file,int line,const char *assertion)
+    {
+    fprintf(stderr,"%s(%d): OpenSSL internal error, assertion failed: %s\n",
+	    file,line,assertion);
+    abort();
+    }
+

crypto/cryptlib.h

@@ -93,6 +93,10 @@ extern "C" {
 #define DECIMAL_SIZE(type)     ((sizeof(type)*8+2)/3+1)
 #define HEX_SIZE(type)         ((sizeof(type)*2)
 
+/* die if we have to */
+void OpenSSLDie(const char *file,int line,const char *assertion);
+#define die(e)	((e) ? (void)0 : OpenSSLDie(__FILE__, __LINE__, #e))
+
 #ifdef  __cplusplus
 }
 #endif

crypto/crypto-lib.com

@@ -88,7 +88,7 @@ $! Define The Different Encryption Types.
 $!
 $ ENCRYPT_TYPES = "Basic,MD2,MD4,MD5,SHA,MDC2,HMAC,RIPEMD,"+ -
 		  "DES,RC2,RC4,RC5,IDEA,BF,CAST,"+ -
-		  "BN,RSA,DSA,DH,DSO,"+ -
+		  "BN,RSA,DSA,DH,DSO,ENGINE,"+ -
 		  "BUFFER,BIO,STACK,LHASH,RAND,ERR,OBJECTS,"+ -
 		  "EVP,EVP_2,ASN1,ASN1_2,PEM,X509,X509V3,"+ -
 		  "CONF,TXT_DB,PKCS7,PKCS12,COMP"
@@ -174,7 +174,7 @@ $!
 $ APPS_DES = "DES/DES,CBC3_ENC"
 $ APPS_PKCS7 = "ENC/ENC;DEC/DEC;SIGN/SIGN;VERIFY/VERIFY,EXAMPLE"
 $
-$ LIB_ = "cryptlib,mem,mem_clr,mem_dbg,cversion,ex_data,tmdiff,cpt_err,ebcdic,uid"
+$ LIB_ = "cryptlib,mem,mem_dbg,cversion,ex_data,tmdiff,cpt_err,ebcdic,uid"
 $ LIB_MD2 = "md2_dgst,md2_one"
 $ LIB_MD4 = "md4_dgst,md4_one"
 $ LIB_MD5 = "md5_dgst,md5_one"
@@ -206,6 +206,9 @@ $ LIB_DSA = "dsa_gen,dsa_key,dsa_lib,dsa_asn1,dsa_vrf,dsa_sign,dsa_err,dsa_ossl"
 $ LIB_DH = "dh_gen,dh_key,dh_lib,dh_check,dh_err"
 $ LIB_DSO = "dso_dl,dso_dlfcn,dso_err,dso_lib,dso_null,"+ -
 	"dso_openssl,dso_win32,dso_vms"
+$ LIB_ENGINE = "engine_err,engine_lib,engine_list,engine_openssl,"+ -
+	"hw_atalla,hw_cswift,hw_ncipher,hw_aep,hw_sureware,"+ -
+	"hw_ubsec,hw_keyclient"
 $ LIB_BUFFER = "buffer,buf_err"
 $ LIB_BIO = "bio_lib,bio_cb,bio_err,"+ -
 	"bss_mem,bss_null,bss_fd,"+ -
@@ -1195,7 +1198,9 @@ $     CC = "CC"
 $     IF ARCH.EQS."VAX" .AND. F$TRNLNM("DECC$CC_DEFAULT").NES."/DECC" -
 	 THEN CC = "CC/DECC"
 $     CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/STANDARD=ANSI89" + -
-           "/NOLIST/PREFIX=ALL/INCLUDE=SYS$DISK:[]" + CCEXTRAFLAGS
+           "/NOLIST/PREFIX=ALL" + -
+	   "/INCLUDE=(SYS$DISK:[],SYS$DISK:[.ENGINE.VENDOR_DEFNS])" + -
+	   CCEXTRAFLAGS
 $!
 $!    Define The Linker Options File Name.
 $!
@@ -1227,7 +1232,8 @@ $	WRITE SYS$OUTPUT "There is no VAX C on Alpha!"
 $	EXIT
 $     ENDIF
 $     IF F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC" THEN CC = "CC/VAXC"
-$     CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/NOLIST/INCLUDE=SYS$DISK:[]" + -
+$     CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
+	   "/INCLUDE=(SYS$DISK:[],SYS$DISK:[.ENGINE.VENDOR_DEFNS])" + -
 	   CCEXTRAFLAGS
 $     CCDEFS = """VAXC""," + CCDEFS
 $!
@@ -1259,7 +1265,8 @@ $!
 $!    Use GNU C...
 $!
 $     CC = "GCC/NOCASE_HACK/''GCC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
-	   "/INCLUDE=SYS$DISK:[]" + CCEXTRAFLAGS
+	   "/INCLUDE=(SYS$DISK:[],SYS$DISK:[.ENGINE.VENDOR_DEFNS])" + -
+	   CCEXTRAFLAGS
 $!
 $!    Define The Linker Options File Name.
 $!
@@ -1326,7 +1333,7 @@ $   CC4 = CC - CCDISABLEWARNINGS + CC4DISABLEWARNINGS
 $!
 $!  Show user the result
 $!
-$   WRITE/SYMBOL SYS$OUTPUT "Main C Compiling Command: ",CC
+$   WRITE SYS$OUTPUT "Main C Compiling Command: ",CC
 $!
 $!  Else The User Entered An Invalid Arguement.
 $!
@@ -1357,7 +1364,7 @@ $ IF ARCH .EQS. "AXP" THEN MACRO = "MACRO/MIGRATION/''DEBUGGER'/''MACRO_OPTIMIZE
 $!
 $!  Show user the result
 $!
-$   WRITE/SYMBOL SYS$OUTPUT "Main MACRO Compiling Command: ",MACRO
+$   WRITE SYS$OUTPUT "Main MACRO Compiling Command: ",MACRO
 $!
 $! Time to check the contents, and to make sure we get the correct library.
 $!

crypto/crypto.h

@@ -95,38 +95,36 @@ extern "C" {
  * names in cryptlib.c
  */
 
-#define CRYPTO_LOCK_ERR			1
-#define CRYPTO_LOCK_ERR_HASH		2
-#define CRYPTO_LOCK_X509		3
-#define CRYPTO_LOCK_X509_INFO		4
-#define CRYPTO_LOCK_X509_PKEY		5
+#define	CRYPTO_LOCK_ERR			1
+#define	CRYPTO_LOCK_ERR_HASH		2
+#define	CRYPTO_LOCK_X509		3
+#define	CRYPTO_LOCK_X509_INFO		4
+#define	CRYPTO_LOCK_X509_PKEY		5
 #define CRYPTO_LOCK_X509_CRL		6
 #define CRYPTO_LOCK_X509_REQ		7
 #define CRYPTO_LOCK_DSA			8
 #define CRYPTO_LOCK_RSA			9
 #define CRYPTO_LOCK_EVP_PKEY		10
-#define CRYPTO_LOCK_X509_STORE		11
-#define CRYPTO_LOCK_SSL_CTX		12
-#define CRYPTO_LOCK_SSL_CERT		13
-#define CRYPTO_LOCK_SSL_SESSION		14
-#define CRYPTO_LOCK_SSL_SESS_CERT	15
-#define CRYPTO_LOCK_SSL			16
-/* for binary compatibility between 0.9.6 minor versions,
- * reuse an existing lock (later version use a new one): */
-# define CRYPTO_LOCK_SSL_METHOD		CRYPTO_LOCK_SSL_CTX
-#define CRYPTO_LOCK_RAND		17
-#define CRYPTO_LOCK_RAND2		18
-#define CRYPTO_LOCK_MALLOC		19
-#define CRYPTO_LOCK_BIO			20
-#define CRYPTO_LOCK_GETHOSTBYNAME	21
-#define CRYPTO_LOCK_GETSERVBYNAME	22
-#define CRYPTO_LOCK_READDIR		23
-#define CRYPTO_LOCK_RSA_BLINDING	24
-#define CRYPTO_LOCK_DH			25
-#define CRYPTO_LOCK_MALLOC2		26
-#define CRYPTO_LOCK_DSO			27
-#define CRYPTO_LOCK_DYNLOCK		28
-#define CRYPTO_NUM_LOCKS		29
+#define	CRYPTO_LOCK_X509_STORE		11
+#define	CRYPTO_LOCK_SSL_CTX		12
+#define	CRYPTO_LOCK_SSL_CERT		13
+#define	CRYPTO_LOCK_SSL_SESSION		14
+#define	CRYPTO_LOCK_SSL_SESS_CERT	15
+#define	CRYPTO_LOCK_SSL			16
+#define	CRYPTO_LOCK_RAND		17
+#define	CRYPTO_LOCK_RAND2		18
+#define	CRYPTO_LOCK_MALLOC		19
+#define	CRYPTO_LOCK_BIO			20
+#define	CRYPTO_LOCK_GETHOSTBYNAME	21
+#define	CRYPTO_LOCK_GETSERVBYNAME	22
+#define	CRYPTO_LOCK_READDIR		23
+#define	CRYPTO_LOCK_RSA_BLINDING	24
+#define	CRYPTO_LOCK_DH			25
+#define	CRYPTO_LOCK_MALLOC2		26
+#define	CRYPTO_LOCK_DSO			27
+#define	CRYPTO_LOCK_DYNLOCK		28
+#define	CRYPTO_LOCK_ENGINE		29
+#define	CRYPTO_NUM_LOCKS		30
 
 #define CRYPTO_LOCK		1
 #define CRYPTO_UNLOCK		2
@@ -148,7 +146,7 @@ extern "C" {
 #endif
 #else
 #define CRYPTO_w_lock(a)
-#define CRYPTO_w_unlock(a)
+#define	CRYPTO_w_unlock(a)
 #define CRYPTO_r_lock(a)
 #define CRYPTO_r_unlock(a)
 #define CRYPTO_add(a,b,c)	((*(a))+=(b))
@@ -345,8 +343,6 @@ void CRYPTO_free(void *);
 void *CRYPTO_realloc(void *addr,int num, const char *file, int line);
 void *CRYPTO_remalloc(void *addr,int num, const char *file, int line);
 
-void OPENSSL_cleanse(void *ptr, size_t len);
-
 void CRYPTO_set_mem_debug_options(long bits);
 long CRYPTO_get_mem_debug_options(void);
 

crypto/des/Makefile.ssl

@@ -130,7 +130,7 @@ lint:
 	lint -DLINT $(INCLUDES) $(SRC)>fluff
 
 depend:
-	$(MAKEDEPEND) -- $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
+	$(MAKEDEPEND) $(INCLUDES) $(DEPFLAG) $(PROGS) $(LIBSRC)
 
 dclean:
 	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
@@ -192,11 +192,8 @@ qud_cksm.o: ../../include/openssl/des.h ../../include/openssl/e_os2.h
 qud_cksm.o: ../../include/openssl/opensslconf.h des_locl.h
 rand_key.o: ../../include/openssl/des.h ../../include/openssl/e_os2.h
 rand_key.o: ../../include/openssl/opensslconf.h ../../include/openssl/rand.h
-read2pwd.o: ../../include/openssl/crypto.h ../../include/openssl/des.h
-read2pwd.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-read2pwd.o: ../../include/openssl/opensslv.h ../../include/openssl/safestack.h
-read2pwd.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-read2pwd.o: des_locl.h
+read2pwd.o: ../../include/openssl/des.h ../../include/openssl/e_os2.h
+read2pwd.o: ../../include/openssl/opensslconf.h des_locl.h
 read_pwd.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
 read_pwd.o: ../../include/openssl/crypto.h ../../include/openssl/des.h
 read_pwd.o: ../../include/openssl/e_os.h ../../include/openssl/e_os2.h
@@ -209,10 +206,7 @@ rpc_enc.o: ../../include/openssl/des.h ../../include/openssl/e_os2.h
 rpc_enc.o: ../../include/openssl/opensslconf.h des_locl.h des_ver.h rpc_des.h
 set_key.o: ../../include/openssl/des.h ../../include/openssl/e_os2.h
 set_key.o: ../../include/openssl/opensslconf.h des_locl.h
-str2key.o: ../../include/openssl/crypto.h ../../include/openssl/des.h
-str2key.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-str2key.o: ../../include/openssl/opensslv.h ../../include/openssl/safestack.h
-str2key.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-str2key.o: des_locl.h
+str2key.o: ../../include/openssl/des.h ../../include/openssl/e_os2.h
+str2key.o: ../../include/openssl/opensslconf.h des_locl.h
 xcbc_enc.o: ../../include/openssl/des.h ../../include/openssl/e_os2.h
 xcbc_enc.o: ../../include/openssl/opensslconf.h des_locl.h

crypto/des/des.c

@@ -86,7 +86,6 @@
 #endif
 #include <sys/stat.h>
 #endif
-#include <openssl/crypto.h>
 #include <openssl/des.h>
 #include <openssl/rand.h>
 
@@ -424,7 +423,7 @@ void doencryption(void)
 				k2[i-8]=k;
 			}
 		des_set_key_unchecked(&k2,ks2);
-		OPENSSL_cleanse(k2,sizeof(k2));
+		memset(k2,0,sizeof(k2));
 		}
 	else if (longk || flag3)
 		{
@@ -432,7 +431,7 @@ void doencryption(void)
 			{
 			des_string_to_2keys(key,&kk,&k2);
 			des_set_key_unchecked(&k2,ks2);
-			OPENSSL_cleanse(k2,sizeof(k2));
+			memset(k2,0,sizeof(k2));
 			}
 		else
 			des_string_to_key(key,&kk);
@@ -454,8 +453,8 @@ void doencryption(void)
 			}
 
 	des_set_key_unchecked(&kk,ks);
-	OPENSSL_cleanse(key,sizeof(key));
-	OPENSSL_cleanse(kk,sizeof(kk));
+	memset(key,0,sizeof(key));
+	memset(kk,0,sizeof(kk));
 	/* woops - A bug that does not showup under unix :-( */
 	memset(iv,0,sizeof(iv));
 	memset(iv2,0,sizeof(iv2));
@@ -663,18 +662,18 @@ void doencryption(void)
 		if (l) fclose(CKSUM_OUT);
 		}
 problems:
-	OPENSSL_cleanse(buf,sizeof(buf));
-	OPENSSL_cleanse(obuf,sizeof(obuf));
-	OPENSSL_cleanse(ks,sizeof(ks));
-	OPENSSL_cleanse(ks2,sizeof(ks2));
-	OPENSSL_cleanse(iv,sizeof(iv));
-	OPENSSL_cleanse(iv2,sizeof(iv2));
-	OPENSSL_cleanse(kk,sizeof(kk));
-	OPENSSL_cleanse(k2,sizeof(k2));
-	OPENSSL_cleanse(uubuf,sizeof(uubuf));
-	OPENSSL_cleanse(b,sizeof(b));
-	OPENSSL_cleanse(bb,sizeof(bb));
-	OPENSSL_cleanse(cksum,sizeof(cksum));
+	memset(buf,0,sizeof(buf));
+	memset(obuf,0,sizeof(obuf));
+	memset(ks,0,sizeof(ks));
+	memset(ks2,0,sizeof(ks2));
+	memset(iv,0,sizeof(iv));
+	memset(iv2,0,sizeof(iv2));
+	memset(kk,0,sizeof(kk));
+	memset(k2,0,sizeof(k2));
+	memset(uubuf,0,sizeof(uubuf));
+	memset(b,0,sizeof(b));
+	memset(bb,0,sizeof(bb));
+	memset(cksum,0,sizeof(cksum));
 	if (Exit) EXIT(Exit);
 	}
 

crypto/des/read2pwd.c

@@ -57,7 +57,6 @@
  */
 
 #include "des_locl.h"
-#include <openssl/crypto.h>
 
 int des_read_password(des_cblock *key, const char *prompt, int verify)
 	{
@@ -66,8 +65,8 @@ int des_read_password(des_cblock *key, const char *prompt, int verify)
 
 	if ((ok=des_read_pw(buf,buff,BUFSIZ,prompt,verify)) == 0)
 		des_string_to_key(buf,key);
-	OPENSSL_cleanse(buf,BUFSIZ);
-	OPENSSL_cleanse(buff,BUFSIZ);
+	memset(buf,0,BUFSIZ);
+	memset(buff,0,BUFSIZ);
 	return(ok);
 	}
 
@@ -79,7 +78,7 @@ int des_read_2passwords(des_cblock *key1, des_cblock *key2, const char *prompt,
 
 	if ((ok=des_read_pw(buf,buff,BUFSIZ,prompt,verify)) == 0)
 		des_string_to_2keys(buf,key1,key2);
-	OPENSSL_cleanse(buf,BUFSIZ);
-	OPENSSL_cleanse(buff,BUFSIZ);
+	memset(buf,0,BUFSIZ);
+	memset(buff,0,BUFSIZ);
 	return(ok);
 	}

crypto/des/read_pwd.c

@@ -218,7 +218,7 @@ int des_read_pw_string(char *buf, int length, const char *prompt,
 	int ret;
 
 	ret=des_read_pw(buf,buff,(length>BUFSIZ)?BUFSIZ:length,prompt,verify);
-	OPENSSL_cleanse(buff,BUFSIZ);
+	memset(buff,0,BUFSIZ);
 	return(ret);
 	}
 

crypto/des/str2key.c

@@ -56,7 +56,6 @@
  * [including the GNU Public Licence.]
  */
 
-#include <openssl/crypto.h>
 #include "des_locl.h"
 
 void des_string_to_key(const char *str, des_cblock *key)
@@ -89,7 +88,7 @@ void des_string_to_key(const char *str, des_cblock *key)
 	des_set_odd_parity(key);
 	des_set_key_unchecked(key,ks);
 	des_cbc_cksum((const unsigned char*)str,key,length,ks,key);
-	OPENSSL_cleanse(ks,sizeof(ks));
+	memset(ks,0,sizeof(ks));
 	des_set_odd_parity(key);
 	}
 
@@ -150,7 +149,7 @@ void des_string_to_2keys(const char *str, des_cblock *key1, des_cblock *key2)
 	des_cbc_cksum((const unsigned char*)str,key1,length,ks,key1);
 	des_set_key_unchecked(key2,ks);
 	des_cbc_cksum((const unsigned char*)str,key2,length,ks,key2);
-	OPENSSL_cleanse(ks,sizeof(ks));
+	memset(ks,0,sizeof(ks));
 	des_set_odd_parity(key1);
 	des_set_odd_parity(key2);
 	}

crypto/dh/Makefile.ssl

@@ -68,7 +68,7 @@ lint:
 	lint -DLINT $(INCLUDES) $(SRC)>fluff
 
 depend:
-	$(MAKEDEPEND) -- $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
+	$(MAKEDEPEND) $(INCLUDES) $(DEPFLAG) $(PROGS) $(LIBSRC)
 
 dclean:
 	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
@@ -101,19 +101,39 @@ dh_gen.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
 dh_gen.o: ../../include/openssl/opensslv.h ../../include/openssl/safestack.h
 dh_gen.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
 dh_gen.o: ../cryptlib.h
-dh_key.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
-dh_key.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-dh_key.o: ../../include/openssl/dh.h ../../include/openssl/e_os.h
-dh_key.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-dh_key.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
+dh_key.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
+dh_key.o: ../../include/openssl/blowfish.h ../../include/openssl/bn.h
+dh_key.o: ../../include/openssl/buffer.h ../../include/openssl/cast.h
+dh_key.o: ../../include/openssl/crypto.h ../../include/openssl/des.h
+dh_key.o: ../../include/openssl/dh.h ../../include/openssl/dsa.h
+dh_key.o: ../../include/openssl/e_os.h ../../include/openssl/e_os2.h
+dh_key.o: ../../include/openssl/engine.h ../../include/openssl/err.h
+dh_key.o: ../../include/openssl/evp.h ../../include/openssl/idea.h
+dh_key.o: ../../include/openssl/lhash.h ../../include/openssl/md2.h
+dh_key.o: ../../include/openssl/md4.h ../../include/openssl/md5.h
+dh_key.o: ../../include/openssl/mdc2.h ../../include/openssl/obj_mac.h
+dh_key.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
 dh_key.o: ../../include/openssl/opensslv.h ../../include/openssl/rand.h
-dh_key.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
+dh_key.o: ../../include/openssl/rc2.h ../../include/openssl/rc4.h
+dh_key.o: ../../include/openssl/rc5.h ../../include/openssl/ripemd.h
+dh_key.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
+dh_key.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
 dh_key.o: ../../include/openssl/symhacks.h ../cryptlib.h
-dh_lib.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
-dh_lib.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-dh_lib.o: ../../include/openssl/dh.h ../../include/openssl/e_os.h
-dh_lib.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-dh_lib.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-dh_lib.o: ../../include/openssl/opensslv.h ../../include/openssl/safestack.h
-dh_lib.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-dh_lib.o: ../cryptlib.h
+dh_lib.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
+dh_lib.o: ../../include/openssl/blowfish.h ../../include/openssl/bn.h
+dh_lib.o: ../../include/openssl/buffer.h ../../include/openssl/cast.h
+dh_lib.o: ../../include/openssl/crypto.h ../../include/openssl/des.h
+dh_lib.o: ../../include/openssl/dh.h ../../include/openssl/dsa.h
+dh_lib.o: ../../include/openssl/e_os.h ../../include/openssl/e_os2.h
+dh_lib.o: ../../include/openssl/engine.h ../../include/openssl/err.h
+dh_lib.o: ../../include/openssl/evp.h ../../include/openssl/idea.h
+dh_lib.o: ../../include/openssl/lhash.h ../../include/openssl/md2.h
+dh_lib.o: ../../include/openssl/md4.h ../../include/openssl/md5.h
+dh_lib.o: ../../include/openssl/mdc2.h ../../include/openssl/obj_mac.h
+dh_lib.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
+dh_lib.o: ../../include/openssl/opensslv.h ../../include/openssl/rand.h
+dh_lib.o: ../../include/openssl/rc2.h ../../include/openssl/rc4.h
+dh_lib.o: ../../include/openssl/rc5.h ../../include/openssl/ripemd.h
+dh_lib.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
+dh_lib.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
+dh_lib.o: ../../include/openssl/symhacks.h ../cryptlib.h

crypto/dh/dh.h

@@ -115,7 +115,11 @@ struct dh_st
 
 	int references;
 	CRYPTO_EX_DATA ex_data;
+#if 0
 	DH_METHOD *meth;
+#else
+	struct engine_st *engine;
+#endif
 	};
 
 #define DH_GENERATOR_2		2
@@ -150,10 +154,15 @@ struct dh_st
 
 DH_METHOD *DH_OpenSSL(void);
 
-void DH_set_default_method(DH_METHOD *meth);
-DH_METHOD *DH_get_default_method(void);
+void DH_set_default_openssl_method(DH_METHOD *meth);
+DH_METHOD *DH_get_default_openssl_method(void);
+#if 0
 DH_METHOD *DH_set_method(DH *dh, DH_METHOD *meth);
 DH *DH_new_method(DH_METHOD *meth);
+#else
+int DH_set_method(DH *dh, struct engine_st *engine);
+DH *DH_new_method(struct engine_st *engine);
+#endif
 
 DH *	DH_new(void);
 void	DH_free(DH *dh);

crypto/dh/dh_key.c

@@ -61,6 +61,7 @@
 #include <openssl/bn.h>
 #include <openssl/rand.h>
 #include <openssl/dh.h>
+#include <openssl/engine.h>
 
 static int generate_key(DH *dh);
 static int compute_key(unsigned char *key, BIGNUM *pub_key, DH *dh);
@@ -72,12 +73,12 @@ static int dh_finish(DH *dh);
 
 int DH_generate_key(DH *dh)
 	{
-	return dh->meth->generate_key(dh);
+	return ENGINE_get_DH(dh->engine)->generate_key(dh);
 	}
 
 int DH_compute_key(unsigned char *key, BIGNUM *pub_key, DH *dh)
 	{
-	return dh->meth->compute_key(key, pub_key, dh);
+	return ENGINE_get_DH(dh->engine)->compute_key(key, pub_key, dh);
 	}
 
 static DH_METHOD dh_ossl = {
@@ -132,12 +133,14 @@ static int generate_key(DH *dh)
 		}
 	mont=(BN_MONT_CTX *)dh->method_mont_p;
 
-	if (generate_new_key)
-		{
-		l = dh->length ? dh->length : BN_num_bits(dh->p)-1; /* secret exponent length */
-		if (!BN_rand(priv_key, l, 0, 0)) goto err;
-		}
-	if (!dh->meth->bn_mod_exp(dh, pub_key,dh->g,priv_key,dh->p,&ctx,mont)) goto err;
+ 	if (generate_new_key)
+ 		{
+ 		l = dh->length ? dh->length : BN_num_bits(dh->p)-1; /* secret exponent length */
+ 		if (!BN_rand(priv_key, l, 0, 0)) goto err;
+ 		}
+	if (!ENGINE_get_DH(dh->engine)->bn_mod_exp(dh, pub_key, dh->g,
+				priv_key,dh->p,&ctx,mont))
+		goto err;
 		
 	dh->pub_key=pub_key;
 	dh->priv_key=priv_key;
@@ -176,7 +179,8 @@ static int compute_key(unsigned char *key, BIGNUM *pub_key, DH *dh)
 		}
 
 	mont=(BN_MONT_CTX *)dh->method_mont_p;
-	if (!dh->meth->bn_mod_exp(dh, tmp,pub_key,dh->priv_key,dh->p,&ctx,mont))
+	if (!ENGINE_get_DH(dh->engine)->bn_mod_exp(dh, tmp, pub_key,
+				dh->priv_key,dh->p,&ctx,mont))
 		{
 		DHerr(DH_F_DH_COMPUTE_KEY,ERR_R_BN_LIB);
 		goto err;

crypto/dh/dh_lib.c

@@ -60,6 +60,7 @@
 #include "cryptlib.h"
 #include <openssl/bn.h>
 #include <openssl/dh.h>
+#include <openssl/engine.h>
 
 const char *DH_version="Diffie-Hellman" OPENSSL_VERSION_PTEXT;
 
@@ -67,17 +68,32 @@ static DH_METHOD *default_DH_method = NULL;
 static int dh_meth_num = 0;
 static STACK_OF(CRYPTO_EX_DATA_FUNCS) *dh_meth = NULL;
 
-void DH_set_default_method(DH_METHOD *meth)
+void DH_set_default_openssl_method(DH_METHOD *meth)
 {
-	default_DH_method = meth;
+	ENGINE *e;
+	/* We'll need to notify the "openssl" ENGINE of this
+	 * change too. We won't bother locking things down at
+	 * our end as there was never any locking in these
+	 * functions! */
+	if(default_DH_method != meth)
+		{
+		default_DH_method = meth;
+		e = ENGINE_by_id("openssl");
+		if(e)
+			{
+			ENGINE_set_DH(e, meth);
+			ENGINE_free(e);
+			}
+		}
 }
 
-DH_METHOD *DH_get_default_method(void)
+DH_METHOD *DH_get_default_openssl_method(void)
 {
 	if(!default_DH_method) default_DH_method = DH_OpenSSL();
 	return default_DH_method;
 }
 
+#if 0
 DH_METHOD *DH_set_method(DH *dh, DH_METHOD *meth)
 {
         DH_METHOD *mtmp;
@@ -87,14 +103,37 @@ DH_METHOD *DH_set_method(DH *dh, DH_METHOD *meth)
         if (meth->init) meth->init(dh);
         return mtmp;
 }
+#else
+int DH_set_method(DH *dh, ENGINE *engine)
+{
+	ENGINE *mtmp;
+	DH_METHOD *meth;
+	mtmp = dh->engine;
+	meth = ENGINE_get_DH(mtmp);
+	if (!ENGINE_init(engine))
+		return 0;
+	if (meth->finish) meth->finish(dh);
+	dh->engine= engine;
+	meth = ENGINE_get_DH(engine);
+	if (meth->init) meth->init(dh);
+	/* SHOULD ERROR CHECK THIS!!! */
+	ENGINE_finish(mtmp);
+	return 1;
+}
+#endif
 
 DH *DH_new(void)
 {
 	return DH_new_method(NULL);
 }
 
+#if 0
 DH *DH_new_method(DH_METHOD *meth)
+#else
+DH *DH_new_method(ENGINE *engine)
+#endif
 	{
+	DH_METHOD *meth;
 	DH *ret;
 	ret=(DH *)OPENSSL_malloc(sizeof(DH));
 
@@ -103,8 +142,17 @@ DH *DH_new_method(DH_METHOD *meth)
 		DHerr(DH_F_DH_NEW,ERR_R_MALLOC_FAILURE);
 		return(NULL);
 		}
-	if(meth) ret->meth = meth;
-	else ret->meth = DH_get_default_method();
+	if(engine)
+		ret->engine = engine;
+	else
+		{
+		if((ret->engine=ENGINE_get_default_DH()) == NULL)
+			{
+			OPENSSL_free(ret);
+			return NULL;
+			}
+		}
+	meth = ENGINE_get_DH(ret->engine);
 	ret->pad=0;
 	ret->version=0;
 	ret->p=NULL;
@@ -119,9 +167,9 @@ DH *DH_new_method(DH_METHOD *meth)
 	ret->counter = NULL;
 	ret->method_mont_p=NULL;
 	ret->references = 1;
-	ret->flags=ret->meth->flags;
+	ret->flags=meth->flags;
 	CRYPTO_new_ex_data(dh_meth,ret,&ret->ex_data);
-	if ((ret->meth->init != NULL) && !ret->meth->init(ret))
+	if ((meth->init != NULL) && !meth->init(ret))
 		{
 		CRYPTO_free_ex_data(dh_meth,ret,&ret->ex_data);
 		OPENSSL_free(ret);
@@ -132,6 +180,7 @@ DH *DH_new_method(DH_METHOD *meth)
 
 void DH_free(DH *r)
 	{
+	DH_METHOD *meth;
 	int i;
 	if(r == NULL) return;
 	i = CRYPTO_add(&r->references, -1, CRYPTO_LOCK_DH);
@@ -147,7 +196,9 @@ void DH_free(DH *r)
 	}
 #endif
 
-	if(r->meth->finish) r->meth->finish(r);
+	meth = ENGINE_get_DH(r->engine);
+	if(meth->finish) meth->finish(r);
+	ENGINE_finish(r->engine);
 
 	CRYPTO_free_ex_data(dh_meth, r, &r->ex_data);
 

crypto/dh/dhtest.c

@@ -59,9 +59,6 @@
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
-
-#include "../e_os.h"
-
 #ifdef WINDOWS
 #include "../bio/bss_file.c" 
 #endif
@@ -110,7 +107,7 @@ int main(int argc, char *argv[])
 	RAND_seed(rnd_seed, sizeof rnd_seed);
 
 	out=BIO_new(BIO_s_file());
-	if (out == NULL) EXIT(1);
+	if (out == NULL) exit(1);
 	BIO_set_fp(out,stdout,BIO_NOCLOSE);
 
 	a=DH_generate_parameters(64,DH_GENERATOR_5,cb,out);
@@ -191,7 +188,7 @@ err:
 	if(b != NULL) DH_free(b);
 	if(a != NULL) DH_free(a);
 	BIO_free(out);
-	EXIT(ret);
+	exit(ret);
 	return(ret);
 	}
 

crypto/dsa/Makefile.ssl

@@ -70,7 +70,7 @@ lint:
 	lint -DLINT $(INCLUDES) $(SRC)>fluff
 
 depend:
-	$(MAKEDEPEND) -- $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
+	$(MAKEDEPEND) $(INCLUDES) $(DEPFLAG) $(PROGS) $(LIBSRC)
 
 dclean:
 	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
@@ -116,39 +116,75 @@ dsa_key.o: ../../include/openssl/rand.h ../../include/openssl/safestack.h
 dsa_key.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
 dsa_key.o: ../../include/openssl/symhacks.h ../cryptlib.h
 dsa_lib.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-dsa_lib.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
-dsa_lib.o: ../../include/openssl/crypto.h ../../include/openssl/dh.h
-dsa_lib.o: ../../include/openssl/dsa.h ../../include/openssl/e_os.h
-dsa_lib.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-dsa_lib.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-dsa_lib.o: ../../include/openssl/opensslv.h ../../include/openssl/safestack.h
-dsa_lib.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-dsa_lib.o: ../cryptlib.h
+dsa_lib.o: ../../include/openssl/blowfish.h ../../include/openssl/bn.h
+dsa_lib.o: ../../include/openssl/buffer.h ../../include/openssl/cast.h
+dsa_lib.o: ../../include/openssl/crypto.h ../../include/openssl/des.h
+dsa_lib.o: ../../include/openssl/dh.h ../../include/openssl/dsa.h
+dsa_lib.o: ../../include/openssl/e_os.h ../../include/openssl/e_os2.h
+dsa_lib.o: ../../include/openssl/engine.h ../../include/openssl/err.h
+dsa_lib.o: ../../include/openssl/evp.h ../../include/openssl/idea.h
+dsa_lib.o: ../../include/openssl/lhash.h ../../include/openssl/md2.h
+dsa_lib.o: ../../include/openssl/md4.h ../../include/openssl/md5.h
+dsa_lib.o: ../../include/openssl/mdc2.h ../../include/openssl/obj_mac.h
+dsa_lib.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
+dsa_lib.o: ../../include/openssl/opensslv.h ../../include/openssl/rand.h
+dsa_lib.o: ../../include/openssl/rc2.h ../../include/openssl/rc4.h
+dsa_lib.o: ../../include/openssl/rc5.h ../../include/openssl/ripemd.h
+dsa_lib.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
+dsa_lib.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
+dsa_lib.o: ../../include/openssl/symhacks.h ../cryptlib.h
 dsa_ossl.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-dsa_ossl.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
-dsa_ossl.o: ../../include/openssl/crypto.h ../../include/openssl/dh.h
-dsa_ossl.o: ../../include/openssl/dsa.h ../../include/openssl/e_os.h
-dsa_ossl.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-dsa_ossl.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
+dsa_ossl.o: ../../include/openssl/blowfish.h ../../include/openssl/bn.h
+dsa_ossl.o: ../../include/openssl/buffer.h ../../include/openssl/cast.h
+dsa_ossl.o: ../../include/openssl/crypto.h ../../include/openssl/des.h
+dsa_ossl.o: ../../include/openssl/dh.h ../../include/openssl/dsa.h
+dsa_ossl.o: ../../include/openssl/e_os.h ../../include/openssl/e_os2.h
+dsa_ossl.o: ../../include/openssl/engine.h ../../include/openssl/err.h
+dsa_ossl.o: ../../include/openssl/evp.h ../../include/openssl/idea.h
+dsa_ossl.o: ../../include/openssl/lhash.h ../../include/openssl/md2.h
+dsa_ossl.o: ../../include/openssl/md4.h ../../include/openssl/md5.h
+dsa_ossl.o: ../../include/openssl/mdc2.h ../../include/openssl/obj_mac.h
+dsa_ossl.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
 dsa_ossl.o: ../../include/openssl/opensslv.h ../../include/openssl/rand.h
-dsa_ossl.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
+dsa_ossl.o: ../../include/openssl/rc2.h ../../include/openssl/rc4.h
+dsa_ossl.o: ../../include/openssl/rc5.h ../../include/openssl/ripemd.h
+dsa_ossl.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
+dsa_ossl.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
 dsa_ossl.o: ../../include/openssl/symhacks.h ../cryptlib.h
 dsa_sign.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-dsa_sign.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
-dsa_sign.o: ../../include/openssl/crypto.h ../../include/openssl/dh.h
-dsa_sign.o: ../../include/openssl/dsa.h ../../include/openssl/e_os.h
-dsa_sign.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-dsa_sign.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
+dsa_sign.o: ../../include/openssl/blowfish.h ../../include/openssl/bn.h
+dsa_sign.o: ../../include/openssl/buffer.h ../../include/openssl/cast.h
+dsa_sign.o: ../../include/openssl/crypto.h ../../include/openssl/des.h
+dsa_sign.o: ../../include/openssl/dh.h ../../include/openssl/dsa.h
+dsa_sign.o: ../../include/openssl/e_os.h ../../include/openssl/e_os2.h
+dsa_sign.o: ../../include/openssl/engine.h ../../include/openssl/err.h
+dsa_sign.o: ../../include/openssl/evp.h ../../include/openssl/idea.h
+dsa_sign.o: ../../include/openssl/lhash.h ../../include/openssl/md2.h
+dsa_sign.o: ../../include/openssl/md4.h ../../include/openssl/md5.h
+dsa_sign.o: ../../include/openssl/mdc2.h ../../include/openssl/obj_mac.h
+dsa_sign.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
 dsa_sign.o: ../../include/openssl/opensslv.h ../../include/openssl/rand.h
-dsa_sign.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
+dsa_sign.o: ../../include/openssl/rc2.h ../../include/openssl/rc4.h
+dsa_sign.o: ../../include/openssl/rc5.h ../../include/openssl/ripemd.h
+dsa_sign.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
+dsa_sign.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
 dsa_sign.o: ../../include/openssl/symhacks.h ../cryptlib.h
 dsa_vrf.o: ../../include/openssl/asn1.h ../../include/openssl/asn1_mac.h
-dsa_vrf.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
-dsa_vrf.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-dsa_vrf.o: ../../include/openssl/dh.h ../../include/openssl/dsa.h
-dsa_vrf.o: ../../include/openssl/e_os.h ../../include/openssl/e_os2.h
-dsa_vrf.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
+dsa_vrf.o: ../../include/openssl/bio.h ../../include/openssl/blowfish.h
+dsa_vrf.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
+dsa_vrf.o: ../../include/openssl/cast.h ../../include/openssl/crypto.h
+dsa_vrf.o: ../../include/openssl/des.h ../../include/openssl/dh.h
+dsa_vrf.o: ../../include/openssl/dsa.h ../../include/openssl/e_os.h
+dsa_vrf.o: ../../include/openssl/e_os2.h ../../include/openssl/engine.h
+dsa_vrf.o: ../../include/openssl/err.h ../../include/openssl/evp.h
+dsa_vrf.o: ../../include/openssl/idea.h ../../include/openssl/lhash.h
+dsa_vrf.o: ../../include/openssl/md2.h ../../include/openssl/md4.h
+dsa_vrf.o: ../../include/openssl/md5.h ../../include/openssl/mdc2.h
+dsa_vrf.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
 dsa_vrf.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-dsa_vrf.o: ../../include/openssl/rand.h ../../include/openssl/safestack.h
+dsa_vrf.o: ../../include/openssl/rand.h ../../include/openssl/rc2.h
+dsa_vrf.o: ../../include/openssl/rc4.h ../../include/openssl/rc5.h
+dsa_vrf.o: ../../include/openssl/ripemd.h ../../include/openssl/rsa.h
+dsa_vrf.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
 dsa_vrf.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
 dsa_vrf.o: ../cryptlib.h

crypto/dsa/dsa.h

@@ -133,7 +133,11 @@ struct dsa_st
 	char *method_mont_p;
 	int references;
 	CRYPTO_EX_DATA ex_data;
+#if 0
 	DSA_METHOD *meth;
+#else
+	struct engine_st *engine;
+#endif
 	};
 
 #define DSAparams_dup(x) (DSA *)ASN1_dup((int (*)())i2d_DSAparams, \
@@ -159,12 +163,20 @@ int	DSA_do_verify(const unsigned char *dgst,int dgst_len,
 
 DSA_METHOD *DSA_OpenSSL(void);
 
-void        DSA_set_default_method(DSA_METHOD *);
-DSA_METHOD *DSA_get_default_method(void);
+void        DSA_set_default_openssl_method(DSA_METHOD *);
+DSA_METHOD *DSA_get_default_openssl_method(void);
+#if 0
 DSA_METHOD *DSA_set_method(DSA *dsa, DSA_METHOD *);
+#else
+int DSA_set_method(DSA *dsa, struct engine_st *engine);
+#endif
 
 DSA *	DSA_new(void);
+#if 0
 DSA *	DSA_new_method(DSA_METHOD *meth);
+#else
+DSA *	DSA_new_method(struct engine_st *engine);
+#endif
 int	DSA_size(DSA *);
 	/* next 4 return -1 on error */
 int	DSA_sign_setup( DSA *dsa,BN_CTX *ctx_in,BIGNUM **kinvp,BIGNUM **rp);

crypto/dsa/dsa_lib.c

@@ -63,6 +63,7 @@
 #include <openssl/bn.h>
 #include <openssl/dsa.h>
 #include <openssl/asn1.h>
+#include <openssl/engine.h>
 
 const char *DSA_version="DSA" OPENSSL_VERSION_PTEXT;
 
@@ -70,12 +71,26 @@ static DSA_METHOD *default_DSA_method = NULL;
 static int dsa_meth_num = 0;
 static STACK_OF(CRYPTO_EX_DATA_FUNCS) *dsa_meth = NULL;
 
-void DSA_set_default_method(DSA_METHOD *meth)
+void DSA_set_default_openssl_method(DSA_METHOD *meth)
 {
-	default_DSA_method = meth;
+	ENGINE *e;
+	/* We'll need to notify the "openssl" ENGINE of this
+	 * change too. We won't bother locking things down at
+	 * our end as there was never any locking in these
+	 * functions! */
+	if(default_DSA_method != meth)
+		{
+		default_DSA_method = meth;
+		e = ENGINE_by_id("openssl");
+		if(e)
+			{
+			ENGINE_set_DSA(e, meth);
+			ENGINE_free(e);
+			}
+		}
 }
 
-DSA_METHOD *DSA_get_default_method(void)
+DSA_METHOD *DSA_get_default_openssl_method(void)
 {
 	if(!default_DSA_method) default_DSA_method = DSA_OpenSSL();
 	return default_DSA_method;
@@ -86,6 +101,7 @@ DSA *DSA_new(void)
 	return DSA_new_method(NULL);
 }
 
+#if 0
 DSA_METHOD *DSA_set_method(DSA *dsa, DSA_METHOD *meth)
 {
         DSA_METHOD *mtmp;
@@ -95,10 +111,33 @@ DSA_METHOD *DSA_set_method(DSA *dsa, DSA_METHOD *meth)
         if (meth->init) meth->init(dsa);
         return mtmp;
 }
-
-
-DSA *DSA_new_method(DSA_METHOD *meth)
+#else
+int DSA_set_method(DSA *dsa, ENGINE *engine)
 	{
+	ENGINE *mtmp;
+	DSA_METHOD *meth;
+	mtmp = dsa->engine;
+	meth = ENGINE_get_DSA(mtmp);
+	if (!ENGINE_init(engine))
+		return 0;
+	if (meth->finish) meth->finish(dsa);
+	dsa->engine = engine;
+	meth = ENGINE_get_DSA(engine);
+	if (meth->init) meth->init(dsa);
+	/* SHOULD ERROR CHECK THIS!!! */
+	ENGINE_finish(mtmp);
+	return 1;
+	}
+#endif
+
+
+#if 0
+DSA *DSA_new_method(DSA_METHOD *meth)
+#else
+DSA *DSA_new_method(ENGINE *engine)
+#endif
+	{
+	DSA_METHOD *meth;
 	DSA *ret;
 
 	ret=(DSA *)OPENSSL_malloc(sizeof(DSA));
@@ -107,8 +146,17 @@ DSA *DSA_new_method(DSA_METHOD *meth)
 		DSAerr(DSA_F_DSA_NEW,ERR_R_MALLOC_FAILURE);
 		return(NULL);
 		}
-	if(meth) ret->meth = meth;
-	else ret->meth = DSA_get_default_method();
+	if(engine)
+		ret->engine = engine;
+	else
+		{
+		if((ret->engine=ENGINE_get_default_DSA()) == NULL)
+			{
+			OPENSSL_free(ret);
+			return NULL;
+			}
+		}
+	meth = ENGINE_get_DSA(ret->engine);
 	ret->pad=0;
 	ret->version=0;
 	ret->write_params=1;
@@ -124,9 +172,9 @@ DSA *DSA_new_method(DSA_METHOD *meth)
 	ret->method_mont_p=NULL;
 
 	ret->references=1;
-	ret->flags=ret->meth->flags;
+	ret->flags=meth->flags;
 	CRYPTO_new_ex_data(dsa_meth,ret,&ret->ex_data);
-	if ((ret->meth->init != NULL) && !ret->meth->init(ret))
+	if ((meth->init != NULL) && !meth->init(ret))
 		{
 		CRYPTO_free_ex_data(dsa_meth,ret,&ret->ex_data);
 		OPENSSL_free(ret);
@@ -138,6 +186,7 @@ DSA *DSA_new_method(DSA_METHOD *meth)
 
 void DSA_free(DSA *r)
 	{
+	DSA_METHOD *meth;
 	int i;
 
 	if (r == NULL) return;
@@ -155,7 +204,9 @@ void DSA_free(DSA *r)
 		}
 #endif
 
-	if(r->meth->finish) r->meth->finish(r);
+	meth = ENGINE_get_DSA(r->engine);
+	if(meth->finish) meth->finish(r);
+	ENGINE_finish(r->engine);
 
 	CRYPTO_free_ex_data(dsa_meth, r, &r->ex_data);
 

crypto/dsa/dsa_ossl.c

@@ -64,6 +64,7 @@
 #include <openssl/dsa.h>
 #include <openssl/rand.h>
 #include <openssl/asn1.h>
+#include <openssl/engine.h>
 
 static DSA_SIG *dsa_do_sign(const unsigned char *dgst, int dlen, DSA *dsa);
 static int dsa_sign_setup(DSA *dsa, BN_CTX *ctx_in, BIGNUM **kinvp, BIGNUM **rp);
@@ -201,7 +202,7 @@ static int dsa_sign_setup(DSA *dsa, BN_CTX *ctx_in, BIGNUM **kinvp, BIGNUM **rp)
 		}
 
 	/* Compute r = (g^k mod p) mod q */
-	if (!dsa->meth->bn_mod_exp(dsa, r,dsa->g,&k,dsa->p,ctx,
+	if (!ENGINE_get_DSA(dsa->engine)->bn_mod_exp(dsa, r,dsa->g,&k,dsa->p,ctx,
 		(BN_MONT_CTX *)dsa->method_mont_p)) goto err;
 	if (!BN_mod(r,r,dsa->q,ctx)) goto err;
 
@@ -290,7 +291,7 @@ static int dsa_do_verify(const unsigned char *dgst, int dgst_len, DSA_SIG *sig,
 	if (!BN_mod(&u1,&u1,dsa->q,ctx)) goto err;
 #else
 	{
-	if (!dsa->meth->dsa_mod_exp(dsa, &t1,dsa->g,&u1,dsa->pub_key,&u2,
+	if (!ENGINE_get_DSA(dsa->engine)->dsa_mod_exp(dsa, &t1,dsa->g,&u1,dsa->pub_key,&u2,
 						dsa->p,ctx,mont)) goto err;
 	/* BN_copy(&u1,&t1); */
 	/* let u1 = u1 mod q */