prepare for release

Thanks to Antonio Martin, Enterprise Secure Access Research and
Development, Cisco Systems, Inc. for discovering this bug and
preparing a fix. (CVE-2012-0050)

.cvsignore

@@ -1,6 +1,22 @@
-Makefile.ssl
+openssl.pc
+libcrypto.pc
+libssl.pc
 MINFO
 makefile.one
 tmp
 out
 outinc
+rehash.time
+testlog
+make.log
+maketest.log
+cctest
+cctest.c
+cctest.a
+*.flc
+semantic.cache
+Makefile
+*.dll*
+*.so*
+*.sl*
+*.dylib*

ACKNOWLEDGMENTS

@@ -0,0 +1,25 @@
+The OpenSSL project depends on volunteer efforts and financial support from
+the end user community. That support comes in the form of donations and paid
+sponsorships, software support contracts, paid consulting services
+and commissioned software development.
+
+Since all these activities support the continued development and improvement
+of OpenSSL we consider all these clients and customers as sponsors of the
+OpenSSL project.
+
+We would like to identify and thank the following such sponsors for their past
+or current significant support of the OpenSSL project:
+
+Very significant support:
+
+	OpenGear: www.opengear.com
+
+Significant support:
+
+	PSW Group: www.psw.net
+
+Please note that we ask permission to identify sponsors and that some sponsors
+we consider eligible for inclusion here have requested to remain anonymous.
+
+Additional sponsorship or financial support is always welcome: for more
+information please contact the OpenSSL Software Foundation.

CHANGES.SSLeay

@@ -148,7 +148,7 @@ eric (about to go bushwalking for the 4 day easter break :-)
       This would tend to cause memory overwrites since SSLv3 has
       a maximum packet size of 16k.  If your program uses
       buffers <= 16k, you would probably never see this problem.
-    - Fixed a new errors that were cause by malloc() not returning
+    - Fixed a few errors that were cause by malloc() not returning
       0 initialised memory..
     - SSL_OP_NETSCAPE_CA_DN_BUG was being switched on when using
       SSL_CTX_set_options(ssl_ctx,SSL_OP_ALL); which was a bad thing

INSTALL

@@ -2,13 +2,20 @@
  INSTALLATION ON THE UNIX PLATFORM
  ---------------------------------
 
- [See INSTALL.W32 for instructions for compiling OpenSSL on Windows systems,
-  and INSTALL.VMS for installing on OpenVMS systems.]
+ [Installation on DOS (with djgpp), Windows, OpenVMS, MacOS (before MacOS X)
+  and NetWare is described in INSTALL.DJGPP, INSTALL.W32, INSTALL.VMS,
+  INSTALL.MacOS and INSTALL.NW.
+  
+  This document describes installation on operating systems in the Unix
+  family.]
 
  To install OpenSSL, you will need:
 
+  * make
   * Perl 5
   * an ANSI C compiler
+  * a development environment in form of development libraries and C
+    header files
   * a supported Unix operating system
 
  Quick Start
@@ -33,7 +40,8 @@
  Configuration Options
  ---------------------
 
- There are several options to ./config to customize the build:
+ There are several options to ./config (or ./Configure) to customize
+ the build:
 
   --prefix=DIR  Install in DIR/bin, DIR/lib, DIR/include/openssl.
 	        Configuration files used by OpenSSL will be in DIR/ssl
@@ -42,9 +50,6 @@
   --openssldir=DIR Directory for OpenSSL files. If no prefix is specified,
                 the library files and binaries are also installed there.
 
-  rsaref        Build with RSADSI's RSAREF toolkit (this assumes that
-                librsaref.a is in the library search path).
-
   no-threads    Don't try to build with support for multi-threaded
                 applications.
 
@@ -52,21 +57,58 @@
                 This will usually require additional system-dependent options!
                 See "Note on multi-threading" below.
 
+  no-zlib       Don't try to build with support for zlib compression and
+                decompression.
+
+  zlib          Build with support for zlib compression/decompression.
+
+  zlib-dynamic  Like "zlib", but has OpenSSL load the zlib library dynamically
+                when needed.  This is only supported on systems where loading
+                of shared libraries is supported.  This is the default choice.
+
+  no-shared     Don't try to create shared libraries.
+
+  shared        In addition to the usual static libraries, create shared
+                libraries on platforms where it's supported.  See "Note on
+                shared libraries" below.
+
   no-asm        Do not use assembler code.
 
   386           Use the 80386 instruction set only (the default x86 code is
-                more efficient, but requires at least a 486).
+                more efficient, but requires at least a 486). Note: Use
+                compiler flags for any other CPU specific configuration,
+                e.g. "-m32" to build x86 code on an x64 system.
+
+  no-sse2	Exclude SSE2 code pathes. Normally SSE2 extention is
+		detected at run-time, but the decision whether or not the
+		machine code will be executed is taken solely on CPU
+		capability vector. This means that if you happen to run OS
+		kernel which does not support SSE2 extension on Intel P4
+		processor, then your application might be exposed to
+		"illegal instruction" exception. There might be a way
+		to enable support in kernel, e.g. FreeBSD kernel can be
+		compiled with CPU_ENABLE_SSE, and there is a way to
+		disengage SSE2 code pathes upon application start-up,
+		but if you aim for wider "audience" running such kernel,
+		consider no-sse2. Both 386 and no-asm options above imply
+		no-sse2.
 
   no-<cipher>   Build without the specified cipher (bf, cast, des, dh, dsa,
                 hmac, md2, md5, mdc2, rc2, rc4, rc5, rsa, sha).
                 The crypto/<cipher> directory can be removed after running
                 "make depend".
 
-  -Dxxx, -lxxx, -Lxxx, -fxxx, -Kxxx These system specific options will
+  -Dxxx, -lxxx, -Lxxx, -fxxx, -mXXX, -Kxxx These system specific options will
                 be passed through to the compiler to allow you to
                 define preprocessor symbols, specify additional libraries,
                 library directories or other compiler options.
 
+  -DHAVE_CRYPTODEV Enable the BSD cryptodev engine even if we are not using
+		BSD. Useful if you are running ocf-linux or something
+		similar. Once enabled you can also enable the use of
+		cryptodev digests, which is usually slower unless you have
+		large amounts data. Use -DUSE_CRYPTODEV_DIGESTS to force
+		it.
 
  Installation in Detail
  ----------------------
@@ -77,8 +119,9 @@
 
      This guesses at your operating system (and compiler, if necessary) and
      configures OpenSSL based on this guess. Run ./config -t to see
-     if it guessed correctly. If it did not get it correct or you want to
-     use a different compiler then go to step 1b. Otherwise go to step 2.
+     if it guessed correctly. If you want to use a different compiler, you
+     are cross-compiling for another platform, or the ./config guess was
+     wrong for other reasons, go to step 1b. Otherwise go to step 2.
 
      On some systems, you can include debugging information as follows:
 
@@ -101,7 +144,8 @@
 
      If your system is not available, you will have to edit the Configure
      program and add the correct configuration for your system. The
-     generic configurations "cc" or "gcc" should usually work.
+     generic configurations "cc" or "gcc" should usually work on 32 bit
+     systems.
 
      Configure creates the file Makefile.ssl from Makefile.org and
      defines various macros in crypto/opensslconf.h (generated from
@@ -115,14 +159,18 @@
      OpenSSL binary ("openssl"). The libraries will be built in the top-level
      directory, and the binary will be in the "apps" directory.
 
-     If "make" fails, please report the problem to <openssl-bugs@openssl.org>.
-     Include the output of "./config -t" and the OpenSSL version
-     number in your message.
+     If "make" fails, look at the output.  There may be reasons for
+     the failure that aren't problems in OpenSSL itself (like missing
+     standard headers).  If it is a problem with OpenSSL itself, please
+     report the problem to <openssl-bugs@openssl.org> (note that your
+     message will be recorded in the request tracker publicly readable
+     via http://www.openssl.org/support/rt.html and will be forwarded to a
+     public mailing list). Include the output of "make report" in your message.
+     Please check out the request tracker. Maybe the bug was already
+     reported or has already been fixed.
 
      [If you encounter assembler error messages, try the "no-asm"
-     configuration option as an immediate fix.  Note that on Solaris x86
-     (not on Sparcs!) you may have to install the GNU assembler to use
-     OpenSSL assembler code -- /usr/ccs/bin/as won't do.]
+     configuration option as an immediate fix.]
 
      Compiling parts of OpenSSL with gcc and others with the system
      compiler will result in unresolved symbols on some systems.
@@ -131,10 +179,14 @@
 
        $ make test
 
-    If a test fails, try removing any compiler optimization flags from
-    the CFLAGS line in Makefile.ssl and run "make clean; make". Please
-    send a bug report to <openssl-bugs@openssl.org>, including the
-    output of "openssl version -a" and of the failed test.
+     If a test fails, look at the output.  There may be reasons for
+     the failure that isn't a problem in OpenSSL itself (like a missing
+     or malfunctioning bc).  If it is a problem with OpenSSL itself,
+     try removing any compiler optimization flags from the CFLAG line
+     in Makefile.ssl and run "make clean; make". Please send a bug
+     report to <openssl-bugs@openssl.org>, including the output of
+     "make report" in order to be added to the request tracker at
+     http://www.openssl.org/support/rt.html.
 
   4. If everything tests ok, install OpenSSL with
 
@@ -145,11 +197,13 @@
 
        certs           Initially empty, this is the default location
                        for certificate files.
+       man/man1        Manual pages for the 'openssl' command line tool
+       man/man3        Manual pages for the libraries (very incomplete)
        misc            Various scripts.
        private         Initially empty, this is the default location
                        for private key files.
 
-     If you didn't chose a different installation prefix, the
+     If you didn't choose a different installation prefix, the
      following additional subdirectories will be created:
 
        bin             Contains the openssl binary and a few other 
@@ -158,6 +212,10 @@
                        compile programs with libcrypto or libssl.
        lib             Contains the OpenSSL library files themselves.
 
+     Use "make install_sw" to install the software without documentation,
+     and "install_docs_html" to install HTML renditions of the manual
+     pages.
+
      Package builders who want to configure the library for standard
      locations, but have the package installed somewhere else so that
      it can easily be packaged, can use
@@ -251,137 +309,52 @@
  from the Configure script.)
 
 
---------------------------------------------------------------------------------
-The orignal Unix build instructions from SSLeay follow. 
-Note: some of this may be out of date and no longer applicable
---------------------------------------------------------------------------------
+ Note on shared libraries
+ ------------------------
 
-# When bringing the SSLeay distribution back from the evil intel world
-# of Windows NT, do the following to make it nice again under unix :-)
-# You don't normally need to run this.
-sh util/fixNT.sh	# This only works for NT now - eay - 21-Jun-1996
+ Shared libraries have certain caveats.  Binary backward compatibility
+ can't be guaranteed before OpenSSL version 1.0.  The only reason to
+ use them would be to conserve memory on systems where several programs
+ are using OpenSSL.
 
-# If you have perl, and it is not in /usr/local/bin, you can run
-perl util/perlpath.pl /new/path
-# and this will fix the paths in all the scripts.  DO NOT put
-# /new/path/perl, just /new/path. The build
-# environment always run scripts as 'perl perlscript.pl' but some of the
-# 'applications' are easier to usr with the path fixed.
+ For some systems, the OpenSSL Configure script knows what is needed to
+ build shared libraries for libcrypto and libssl.  On these systems,
+ the shared libraries are currently not created by default, but giving
+ the option "shared" will get them created.  This method supports Makefile
+ targets for shared library creation, like linux-shared.  Those targets
+ can currently be used on their own just as well, but this is expected
+ to change in future versions of OpenSSL.
 
-# Edit crypto/cryptlib.h, tools/c_rehash, and Makefile.ssl
-# to set the install locations if you don't like
-# the default location of /usr/local/ssl
-# Do this by running
-perl util/ssldir.pl /new/ssl/home
-# if you have perl, or by hand if not.
+ Note on random number generation
+ --------------------------------
 
-# If things have been stuffed up with the sym links, run
-make -f Makefile.ssl links
-# This will re-populate lib/include with symlinks and for each
-# directory, link Makefile to Makefile.ssl
+ Availability of cryptographically secure random numbers is required for
+ secret key generation. OpenSSL provides several options to seed the
+ internal PRNG. If not properly seeded, the internal PRNG will refuse
+ to deliver random bytes and a "PRNG not seeded error" will occur.
+ On systems without /dev/urandom (or similar) device, it may be necessary
+ to install additional support software to obtain random seed.
+ Please check out the manual pages for RAND_add(), RAND_bytes(), RAND_egd(),
+ and the FAQ for more information.
 
-# Setup the machine dependent stuff for the top level makefile
-# and some select .h files
-# If you don't have perl, this will bomb, in which case just edit the
-# top level Makefile.ssl
-./Configure 'system type'
+ Note on support for multiple builds
+ -----------------------------------
 
-# The 'Configure' command contains default configuration parameters
-# for lots of machines.  Configure edits 5 lines in the top level Makefile
-# It modifies the following values in the following files
-Makefile.ssl		CC CFLAG EX_LIBS BN_MULW
-crypto/des/des.h	DES_LONG
-crypto/des/des_locl.h	DES_PTR
-crypto/md2/md2.h	MD2_INT
-crypto/rc4/rc4.h	RC4_INT
-crypto/rc4/rc4_enc.c	RC4_INDEX
-crypto/rc2/rc2.h	RC2_INT
-crypto/bf/bf_locl.h	BF_INT
-crypto/idea/idea.h	IDEA_INT
-crypto/bn/bn.h		BN_LLONG (and defines one of SIXTY_FOUR_BIT,
-				  SIXTY_FOUR_BIT_LONG, THIRTY_TWO_BIT,
-				  SIXTEEN_BIT or EIGHT_BIT)
-Please remember that all these files are actually copies of the file with
-a .org extention.  So if you change crypto/des/des.h, the next time
-you run Configure, it will be runover by a 'configured' version of
-crypto/des/des.org.  So to make the changer the default, change the .org
-files.  The reason these files have to be edited is because most of
-these modifications change the size of fundamental data types.
-While in theory this stuff is optional, it often makes a big
-difference in performance and when using assember, it is importaint
-for the 'Bignum bits' match those required by the assember code.
-A warning for people using gcc with sparc cpu's.  Gcc needs the -mv8
-flag to use the hardware multiply instruction which was not present in
-earlier versions of the sparc CPU.  I define it by default.  If you
-have an old sparc, and it crashes, try rebuilding with this flag
-removed.  I am leaving this flag on by default because it makes
-things run 4 times faster :-)
+ OpenSSL is usually built in its source tree.  Unfortunately, this doesn't
+ support building for multiple platforms from the same source tree very well.
+ It is however possible to build in a separate tree through the use of lots
+ of symbolic links, which should be prepared like this:
 
-# clean out all the old stuff
-make clean
+	mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
+	cd objtree/"`uname -s`-`uname -r`-`uname -m`"
+	(cd $OPENSSL_SOURCE; find . -type f) | while read F; do
+		mkdir -p `dirname $F`
+		rm -f $F; ln -s $OPENSSL_SOURCE/$F $F
+		echo $F '->' $OPENSSL_SOURCE/$F
+	done
+	make -f Makefile.org clean
 
-# Do a make depend only if you have the makedepend command installed
-# This is not needed but it does make things nice when developing.
-make depend
+ OPENSSL_SOURCE is an environment variable that contains the absolute (this
+ is important!) path to the OpenSSL source tree.
 
-# make should build everything
-make
-
-# fix up the demo certificate hash directory if it has been stuffed up.
-make rehash
-
-# test everything
-make test
-
-# install the lot
-make install
-
-# It is worth noting that all the applications are built into the one
-# program, ssleay, which is then has links from the other programs
-# names to it.
-# The applicatons can be built by themselves, just don't define the
-# 'MONOLITH' flag.  So to build the 'enc' program stand alone,
-gcc -O2 -Iinclude apps/enc.c apps/apps.c libcrypto.a
-
-# Other useful make options are
-make makefile.one
-# which generate a 'makefile.one' file which will build the complete
-# SSLeay distribution with temp. files in './tmp' and 'installable' files
-# in './out'
-
-# Have a look at running
-perl util/mk1mf.pl help
-# this can be used to generate a single makefile and is about the only
-# way to generate makefiles for windows.
-
-# There is actually a final way of building SSLeay.
-gcc -O2 -c -Icrypto -Iinclude crypto/crypto.c
-gcc -O2 -c -Issl -Iinclude ssl/ssl.c
-# and you now have the 2 libraries as single object files :-).
-# If you want to use the assember code for your particular platform
-# (DEC alpha/x86 are the main ones, the other assember is just the
-# output from gcc) you will need to link the assember with the above generated
-# object file and also do the above compile as
-gcc -O2 -DBN_ASM -c -Icrypto -Iinclude crypto/crypto.c
-
-This last option is probably the best way to go when porting to another
-platform or building shared libraries.  It is not good for development so
-I don't normally use it.
-
-To build shared libararies under unix, have a look in shlib, basically 
-you are on your own, but it is quite easy and all you have to do
-is compile 2 (or 3) files.
-
-For mult-threading, have a read of doc/threads.doc.  Again it is quite
-easy and normally only requires some extra callbacks to be defined
-by the application.
-The examples for solaris and windows NT/95 are in the mt directory.
-
-have fun
-
-eric 25-Jun-1997
-
-IRIX 5.x will build as a 32 bit system with mips1 assember.
-IRIX 6.x will build as a 64 bit system with mips3 assember.  It conforms
-to n32 standards. In theory you can compile the 64 bit assember under
-IRIX 5.x but you will have to have the correct system software installed.
+ Also, operations like 'make update' should still be made in the source tree.

INSTALL.DJGPP

@@ -0,0 +1,47 @@
+
+ 
+ INSTALLATION ON THE DOS PLATFORM WITH DJGPP
+ -------------------------------------------
+
+ OpenSSL has been ported to DJGPP, a Unix look-alike 32-bit run-time
+ environment for 16-bit DOS, but only with long filename support.
+ If you wish to compile on native DOS with 8+3 filenames, you will
+ have to tweak the installation yourself, including renaming files
+ with illegal or duplicate names.
+
+ You should have a full DJGPP environment installed, including the
+ latest versions of DJGPP, GCC, BINUTILS, BASH, etc. This package
+ requires that PERL and BC also be installed.
+
+ All of these can be obtained from the usual DJGPP mirror sites or
+ directly at "http://www.delorie.com/pub/djgpp". For help on which
+ files to download, see the DJGPP "ZIP PICKER" page at
+ "http://www.delorie.com/djgpp/zip-picker.html". You also need to have
+ the WATT-32 networking package installed before you try to compile
+ OpenSSL. This can be obtained from "http://www.bgnett.no/~giva/".
+ The Makefile assumes that the WATT-32 code is in the directory
+ specified by the environment variable WATT_ROOT. If you have watt-32
+ in directory "watt32" under your main DJGPP directory, specify
+ WATT_ROOT="/dev/env/DJDIR/watt32".
+
+ To compile OpenSSL, start your BASH shell, then configure for DJGPP by
+ running "./Configure" with appropriate arguments:
+
+	./Configure no-threads --prefix=/dev/env/DJDIR DJGPP
+ 
+ And finally fire up "make". You may run out of DPMI selectors when
+ running in a DOS box under Windows. If so, just close the BASH
+ shell, go back to Windows, and restart BASH. Then run "make" again.
+
+ RUN-TIME CAVEAT LECTOR
+ --------------
+
+ Quoting FAQ:
+
+  "Cryptographic software needs a source of unpredictable data to work
+   correctly.  Many open source operating systems provide a "randomness
+   device" (/dev/urandom or /dev/random) that serves this purpose."
+
+ As of version 0.9.7f DJGPP port checks upon /dev/urandom$ for a 3rd
+ party "randomness" DOS driver. One such driver, NOISE.SYS, can be
+ obtained from "http://www.rahul.net/dkaufman/index.html".

INSTALL.MacOS

@@ -0,0 +1,72 @@
+OpenSSL - Port To The Macintosh OS 9 or Earlier
+===============================================
+
+Thanks to Roy Wood <roy@centricsystems.ca> initial support for Mac OS (pre
+X) is now provided. "Initial" means that unlike other platforms where you
+get an SDK and a "swiss army" openssl application, on Macintosh you only
+get one sample application which fetches a page over HTTPS(*) and dumps it
+in a window. We don't even build the test applications so that we can't
+guarantee that all algorithms are operational.
+
+Required software:
+
+- StuffIt Expander 5.5 or later, alternatively MacGzip and SUNtar;
+- Scriptable Finder;
+- CodeWarrior Pro 5;
+
+Installation procedure:
+
+- fetch the source at ftp://ftp.openssl.org/ (well, you probably already
+  did, huh?)
+- unpack the .tar.gz file:
+	- if you have StuffIt Expander then just drag it over it;
+	- otherwise uncompress it with MacGzip and then unpack with SUNtar;
+- locate MacOS folder in OpenSSL source tree and open it;
+- unbinhex mklinks.as.hqx and OpenSSL.mcp.hqx if present (**), do it
+  "in-place", i.e. unpacked files should end-up in the very same folder;
+- execute mklinks.as;
+- open OpenSSL.mcp(***) and build 'GetHTTPS PPC' target(****);
+- that's it for now;
+
+(*)	URL is hardcoded into ./MacOS/GetHTTPS.src/GetHTTPS.cpp, lines 40
+        to 42, change appropriately.
+(**)	If you use SUNtar, then it might have already unbinhexed the files
+	in question.
+(***)	The project file was saved with CW Pro 5.3. If you have an earlier
+	version and it refuses to open it, then download
+	http://www.openssl.org/~appro/OpenSSL.mcp.xml and import it
+	overwriting the original OpenSSL.mcp.
+(****)	Other targets are works in progress. If you feel like giving 'em a
+	shot, then you should know that OpenSSL* and Lib* targets are
+	supposed to be built with the GUSI, MacOS library which mimics
+	BSD sockets and some other POSIX APIs. The GUSI distribution is
+	expected to be found in the same directory as the openssl source tree,
+	i.e., in the parent directory to the one where this very file,
+	namely INSTALL.MacOS, resides. For more information about GUSI, see
+	http://www.iis.ee.ethz.ch/~neeri/macintosh/gusi-qa.html
+
+Finally some essential comments from our generous contributor:-)
+
+"I've gotten OpenSSL working on the Macintosh. It's probably a bit of a
+hack, but it works for what I'm doing. If you don't like the way I've done
+it, then feel free to change what I've done. I freely admit that I've done
+some less-than-ideal things in my port, and if you don't like the way I've
+done something, then feel free to change it-- I won't be offended!
+
+... I've tweaked "bss_sock.c" a little to call routines in a "MacSocket"
+library I wrote. My MacSocket library is a wrapper around OpenTransport,
+handling stuff like endpoint creation, reading, writing, etc. It is not
+designed as a high-performance package such as you'd use in a webserver,
+but is fine for lots of other applications. MacSocket also uses some other
+code libraries I've written to deal with string manipulations and error
+handling. Feel free to use these things in your own code, but give me
+credit and/or send me free stuff in appreciation! :-)
+
+...
+
+If you have any questions, feel free to email me as the following:
+
+roy@centricsystems.ca
+
+-Roy Wood"
+

INSTALL.NW

@@ -0,0 +1,454 @@
+
+INSTALLATION ON THE NETWARE PLATFORM
+------------------------------------
+
+Notes about building OpenSSL for NetWare.
+
+
+BUILD PLATFORM:
+---------------
+The build scripts (batch files, perl scripts, etc) have been developed and
+tested on W2K.  The scripts should run fine on other Windows platforms
+(NT, Win9x, WinXP) but they have not been tested.  They may require some
+modifications.
+
+
+Supported NetWare Platforms - NetWare 5.x, NetWare 6.x:
+-------------------------------------------------------
+OpenSSL can either use the WinSock interfaces introduced in NetWare 5,
+or the BSD socket interface.  Previous versions of NetWare, 4.x and 3.x,
+are only supported if OpenSSL is build for CLIB and BSD sockets;
+WinSock builds only support NetWare 5 and up.
+
+On NetWare there are two c-runtime libraries.  There is the legacy CLIB 
+interfaces and the newer LIBC interfaces.  Being ANSI-C libraries, the 
+functionality in CLIB and LIBC is similar but the LIBC interfaces are built 
+using Novell Kernal Services (NKS) which is designed to leverage 
+multi-processor environments.
+
+The NetWare port of OpenSSL can be configured to build using CLIB or LIBC.
+The CLIB build was developed and tested using NetWare 5.0 sp6.0a.  The LIBC 
+build was developed and tested using the NetWare 6.0 FCS.  
+
+The necessary LIBC functionality ships with NetWare 6.  However, earlier 
+NetWare 5.x versions will require updates in order to run the OpenSSL LIBC
+build (NetWare 5.1 SP8 is known to work).
+
+As of June 2005, the LIBC build can be configured to use BSD sockets instead
+of WinSock sockets. Call Configure (usually through netware\build.bat) using
+a target of "netware-libc-bsdsock" instead of "netware-libc".
+
+As of June 2007, support for CLIB and BSD sockets is also now available
+using a target of "netware-clib-bsdsock" instead of "netware-clib";
+also gcc builds are now supported on both Linux and Win32 (post 0.9.8e).
+
+REQUIRED TOOLS:
+---------------
+Based upon the configuration and build options used, some or all of the
+following tools may be required:
+
+* Perl for Win32 - required (http://www.activestate.com/ActivePerl)
+   Used to run the various perl scripts on the build platform.
+
+* Perl 5.8.0 for NetWare v3.20 (or later) - required 
+   (http://developer.novell.com) Used to run the test script on NetWare 
+   after building.
+
+* Compiler / Linker - required:
+   Metrowerks CodeWarrior PDK 2.1 (or later) for NetWare (commercial):
+      Provides command line tools used for building.
+      Tools:
+      mwccnlm.exe  - C/C++ Compiler for NetWare
+      mwldnlm.exe  - Linker for NetWare
+      mwasmnlm.exe - x86 assembler for NetWare (if using assembly option)
+
+   gcc / nlmconv Cross-Compiler, available from Novell Forge (free):
+         http://forge.novell.com/modules/xfmod/project/?aunixnw
+
+* Assemblers - optional:
+   If you intend to build using the assembly options you will need an
+   assembler.  Work has been completed to support two assemblers, Metrowerks
+   and NASM.  However, during development, a bug was found in the Metrowerks
+   assembler which generates incorrect code.  Until this problem is fixed,
+   the Metrowerks assembler cannot be used.
+
+   mwasmnlm.exe - Metrowerks x86 assembler - part of CodeWarrior tools.
+         (version 2.2 Built Aug 23, 1999 - not useable due to code
+          generation bug)
+
+   nasmw.exe - Netwide Assembler NASM
+         version 0.98 was used in development and testing
+
+* Make Tool - required:
+   In order to build you will need a make tool.  Two make tools are
+   supported, GNU make (gmake.exe) or Microsoft nmake.exe.
+
+   make.exe - GNU make for Windows (version 3.75 used for development)
+         http://gnuwin32.sourceforge.net/packages/make.htm
+
+   nmake.exe - Microsoft make (Version 6.00.8168.0 used for development)
+         http://support.microsoft.com/kb/132084/EN-US/
+
+* Novell Developer Kit (NDK) - required: (http://developer.novell.com)
+
+   CLIB - BUILDS:
+
+      WinSock2 Developer Components for NetWare:
+         For initial development, the October 27, 2000 version was used.
+         However, future versions should also work.
+
+         NOTE:  The WinSock2 components include headers & import files for
+         NetWare, but you will also need the winsock2.h and supporting
+         headers (pshpack4.h, poppack.h, qos.h) delivered in the
+         Microsoft SDK.  Note: The winsock2.h support headers may change
+         with various versions of winsock2.h.  Check the dependencies
+         section on the NDK WinSock2 download page for the latest
+         information on dependencies. These components are unsupported by
+         Novell. They are provided as a courtesy, but it is strongly
+         suggested that all development be done using LIBC, not CLIB.
+
+         As of June 2005, the WinSock2 components are available at:
+         http://forgeftp.novell.com//ws2comp/
+
+
+      NLM and NetWare libraries for C (including CLIB and XPlat):
+         If you are going to build a CLIB version of OpenSSL, you will
+         need the CLIB headers and imports.  The March, 2001 NDK release or 
+         later is recommended.
+
+         Earlier versions should work but haven't been tested.  In recent
+         versions the import files have been consolidated and function
+         names moved.  This means you may run into link problems
+         (undefined symbols) when using earlier versions.   The functions
+         are available in earlier versions, but you will have to modifiy
+         the make files to include additional import files (see
+         openssl\util\pl\netware.pl).
+
+
+   LIBC - BUILDS:
+   
+      Libraries for C (LIBC) - LIBC headers and import files
+         If you are going to build a LIBC version of OpenSSL, you will
+         need the LIBC headers and imports.  The March 14, 2002 NDK release or
+         later is required.  
+         
+         NOTE: The LIBC SDK includes the necessary WinSock2 support.
+         It is not necessary to download the WinSock2 NDK when building for
+         LIBC. The LIBC SDK also includes the appropriate BSD socket support
+         if configuring to use BSD sockets.
+
+
+BUILDING:
+---------
+Before building, you will need to set a few environment variables.  You can
+set them manually or you can modify the "netware\set_env.bat" file.
+
+The set_env.bat file is a template you can use to set up the path
+and environment variables you will need to build.  Modify the
+various lines to point to YOUR tools and run set_env.bat.
+
+   netware\set_env.bat <target> [compiler]
+
+      target        - "netware-clib" - CLIB NetWare build
+                    - "netware-libc" - LIBC NetWare build
+
+      compiler      - "gnuc"         - GNU GCC Compiler
+                    - "codewarrior"  - MetroWerks CodeWarrior (default)
+
+If you don't use set_env.bat, you will need to set up the following
+environment variables:
+
+   PATH - Set PATH to point to the tools you will use.
+
+   INCLUDE - The location of the NDK include files.
+         
+            CLIB ex: set INCLUDE=c:\ndk\nwsdk\include\nlm
+            LIBC ex: set INCLUDE=c:\ndk\libc\include
+
+   PRELUDE - The absolute path of the prelude object to link with.  For
+            a CLIB build it is recommended you use the "clibpre.o" files shipped
+            with the Metrowerks PDK for NetWare.  For a LIBC build you should 
+            use the "libcpre.o" file delivered with the LIBC NDK components.
+
+            CLIB ex: set PRELUDE=c:\ndk\nwsdk\imports\clibpre.o
+            LIBC ex: set PRELUDE=c:\ndk\libc\imports\libcpre.o
+
+   IMPORTS - The locaton of the NDK import files.
+
+            CLIB ex: set IMPORTS=c:\ndk\nwsdk\imports
+            LIBC ex: set IMPORTS=c:\ndk\libc\imports
+
+
+In order to build, you need to run the Perl scripts to configure the build
+process and generate a make file.  There is a batch file,
+"netware\build.bat", to automate the process.
+
+Build.bat runs the build configuration scripts and generates a make file.
+If an assembly option is specified, it also runs the scripts to generate 
+the assembly code.  Always run build.bat from the "openssl" directory.
+
+   netware\build [target] [debug opts] [assembly opts] [configure opts]
+
+      target        - "netware-clib" - CLIB NetWare build (WinSock Sockets)
+                    - "netware-clib-bsdsock" - CLIB NetWare build (BSD Sockets)
+                    - "netware-libc" - LIBC NetWare build (WinSock Sockets)
+                    - "netware-libc-bsdsock" - LIBC NetWare build (BSD Sockets)
+ 
+      debug opts    - "debug"  - build debug
+
+      assembly opts - "nw-mwasm" - use Metrowerks assembler
+                      "nw-nasm"  - use NASM assembler
+                      "no-asm"   - don't use assembly
+
+      configure opts- all unrecognized arguments are passed to the
+                      perl 'configure' script. See that script for
+                      internal documentation regarding options that
+                      are available.
+
+   examples:
+
+      CLIB build, debug, without assembly:
+         netware\build.bat netware-clib debug no-asm
+
+      LIBC build, non-debug, using NASM assembly, add mdc2 support:
+         netware\build.bat netware-libc nw-nasm enable-mdc2
+
+      LIBC build, BSD sockets, non-debug, without assembly:
+         netware\build.bat netware-libc-bsdsock no-asm
+
+Running build.bat generates a make file to be processed by your make 
+tool (gmake or nmake):
+
+   CLIB ex: gmake -f netware\nlm_clib_dbg.mak 
+   LIBC ex: gmake -f netware\nlm_libc.mak 
+   LIBC ex: gmake -f netware\nlm_libc_bsdsock.mak 
+
+
+You can also run the build scripts manually if you do not want to use the
+build.bat file.  Run the following scripts in the "\openssl"
+subdirectory (in the order listed below):
+
+   perl configure no-asm [other config opts] [netware-clib|netware-libc|netware-libc-bsdsock]
+      configures no assembly build for specified netware environment
+      (CLIB or LIBC).
+
+   perl util\mkfiles.pl >MINFO
+      generates a listing of source files (used by mk1mf)
+
+   perl util\mk1mf.pl no-asm [other config opts] [netware-clib|netware-libc|netware-libc-bsdsock >netware\nlm.mak
+      generates the makefile for NetWare
+
+   gmake -f netware\nlm.mak
+      build with the make tool (nmake.exe also works)
+
+NOTE:  If you are building using the assembly option, you must also run the
+various Perl scripts to generate the assembly files.  See build.bat
+for an example of running the various assembly scripts.  You must use the
+"no-asm" option to build without assembly.  The configure and mk1mf scripts
+also have various other options.  See the scripts for more information.
+
+
+The output from the build is placed in the following directories:
+
+   CLIB Debug build:
+      out_nw_clib.dbg     - static libs & test nlm(s)
+      tmp_nw_clib.dbg     - temporary build files
+      outinc_nw_clib      - necessary include files
+
+   CLIB Non-debug build:
+      out_nw_clib         - static libs & test nlm(s)
+      tmp_nw_clib         - temporary build files
+      outinc_nw_clib      - necesary include files
+
+   LIBC Debug build:
+      out_nw_libc.dbg     - static libs & test nlm(s)
+      tmp_nw_libc.dbg     - temporary build files
+      outinc_nw_libc      - necessary include files
+
+   LIBC Non-debug build:
+      out_nw_libc         - static libs & test nlm(s)
+      tmp_nw_libc         - temporary build files
+      outinc_nw_libc      - necesary include files
+
+
+TESTING:
+--------
+The build process creates the OpenSSL static libs ( crypto.lib, ssl.lib,
+rsaglue.lib ) and several test programs.  You should copy the test programs
+to your NetWare server and run the tests.
+
+The batch file "netware\cpy_tests.bat" will copy all the necessary files
+to your server for testing.  In order to run the batch file, you need a
+drive mapped to your target server.  It will create an "OpenSSL" directory
+on the drive and copy the test files to it.  CAUTION: If a directory with the
+name of "OpenSSL" already exists, it will be deleted.
+
+To run cpy_tests.bat:
+
+   netware\cpy_tests [output directory] [NetWare drive]
+
+      output directory - "out_nw_clib.dbg", "out_nw_libc", etc.
+      NetWare drive    - drive letter of mapped drive
+
+      CLIB ex: netware\cpy_tests out_nw_clib m:
+      LIBC ex: netware\cpy_tests out_nw_libc m:
+
+
+The Perl script, "do_tests.pl", in the "OpenSSL" directory on the server
+should be used to execute the tests.  Before running the script, make sure
+your SEARCH PATH includes the "OpenSSL" directory.  For example, if you
+copied the files to the "sys:" volume you use the command:
+
+   SEARCH ADD SYS:\OPENSSL
+
+
+To run do_tests.pl type (at the console prompt):
+
+   perl \openssl\do_tests.pl [options]
+
+      options:
+         -p    - pause after executing each test
+
+The do_tests.pl script generates a log file "\openssl\test_out\tests.log"
+which should be reviewed for errors.  Any errors will be denoted by the word
+"ERROR" in the log.
+
+DEVELOPING WITH THE OPENSSL SDK:
+--------------------------------
+Now that everything is built and tested, you are ready to use the OpenSSL
+libraries in your development.
+
+There is no real installation procedure, just copy the static libs and
+headers to your build location.  The libs (crypto.lib & ssl.lib) are
+located in the appropriate "out_nw_XXXX" directory 
+(out_nw_clib, out_nw_libc, etc).  
+
+The headers are located in the appropriate "outinc_nw_XXX" directory 
+(outinc_nw_clib, outinc_nw_libc).  
+
+One suggestion is to create the following directory 
+structure for the OpenSSL SDK:
+
+   \openssl
+      |- bin
+      |   |- openssl.nlm
+      |   |- (other tests you want)
+      |
+      |- lib
+      |   | - crypto.lib
+      |   | - ssl.lib
+      |
+      |- include
+      |   | - openssl
+      |   |    | - (all the headers in "outinc_nw\openssl")
+
+
+The program "openssl.nlm" can be very useful.  It has dozens of
+options and you may want to keep it handy for debugging, testing, etc.
+
+When building your apps using OpenSSL, define "NETWARE".  It is needed by
+some of the OpenSSL headers.  One way to do this is with a compile option,
+for example "-DNETWARE".
+
+
+
+NOTES:
+------
+
+Resource leaks in Tests
+------------------------
+Some OpenSSL tests do not clean up resources and NetWare reports
+the resource leaks when the tests unload.  If this really bugs you,
+you can stop the messages by setting the developer option off at the console
+prompt (set developer option = off).  Or better yet, fix the tests to
+clean up the resources!
+
+
+Multi-threaded Development
+---------------------------
+The NetWare version of OpenSSL is thread-safe, however multi-threaded
+applications must provide the necessary locking function callbacks.  This
+is described in doc\threads.doc.  The file "openssl-x.x.x\crypto\threads\mttest.c"
+is a multi-threaded test program and demonstrates the locking functions.
+
+
+What is openssl2.nlm?
+---------------------
+The openssl program has numerous options and can be used for many different
+things.  Many of the options operate in an interactive mode requiring the
+user to enter data.  Because of this, a default screen is created for the
+program.  However, when running the test script it is not desirable to
+have a seperate screen.  Therefore, the build also creates openssl2.nlm.
+Openssl2.nlm is functionally identical but uses the console screen.
+Openssl2 can be used when a non-interactive mode is desired.
+
+NOTE:  There are may other possibilities (command line options, etc)
+which could have been used to address the screen issue.  The openssl2.nlm
+option was chosen because it impacted only the build not the code.
+
+
+Why only static libraries?
+--------------------------
+Globals, globals, and more globals.  The OpenSSL code uses many global
+variables that are allocated and initialized when used for the first time.
+
+On NetWare, most applications (at least historically) run in the kernel.
+When running in the kernel, there is one instance of global variables.
+For regular application type NLM(s) this isn't a problem because they are
+the only ones using the globals.  However, for a library NLM (an NLM which
+exposes functions and has no threads of execution), the globals cause
+problems.  Applications could inadvertently step on each other if they
+change some globals.  Even worse, the first application that triggers a
+global to be allocated and initialized has the allocated memory charged to
+itself.  Now when that application unloads, NetWare will clean up all the
+applicaton's memory.  The global pointer variables inside OpenSSL now
+point to freed memory.  An abend waiting to happen!
+
+To work correctly in the kernel, library NLM(s) that use globals need to
+provide a set of globals (instance data) for each application.  Another
+option is to require the library only be loaded in a protected address
+space along with the application using it.
+
+Modifying the OpenSSL code to provide a set of globals (instance data) for
+each application isn't technically difficult, but due to the large number
+globals it would require substantial code changes and it wasn't done.  Hence,
+the build currently only builds static libraries which are then linked
+into each application.
+
+NOTE:  If you are building a library NLM that uses the OpenSSL static
+libraries, you will still have to deal with the global variable issue.
+This is because when you link in the OpenSSL code you bring in all the
+globals.  One possible solution for the global pointer variables is to
+register memory functions with OpenSSL which allocate memory and charge it
+to your library NLM (see the function CRYPTO_set_mem_functions).  However,
+be aware that now all memory allocated by OpenSSL is charged to your NLM.
+
+
+CodeWarrior Tools and W2K
+---------------------------
+There have been problems reported with the CodeWarrior Linker
+(mwldnlm.exe) in the PDK 2.1 for NetWare when running on Windows 2000.  The
+problems cause the link step to fail.  The only work around is to obtain an
+updated linker from Metrowerks.  It is expected Metrowerks will release
+PDK 3.0 (in beta testing at this time - May, 2001) in the near future which
+will fix these problems.
+
+
+Makefile "vclean"
+------------------
+The generated makefile has a "vclean" target which cleans up the build
+directories.  If you have been building successfully and suddenly
+experience problems, use "vclean" (gmake -f netware\nlm_xxxx.mak vclean) and retry.
+
+
+"Undefined Symbol" Linker errors
+--------------------------------
+There have been linker errors reported when doing a CLIB build.  The problems
+occur because some versions of the CLIB SDK import files inadvertently 
+left out some symbols.  One symbol in particular is "_lrotl".  The missing
+functions are actually delivered in the binaries, but they were left out of
+the import files.  The issues should be fixed in the September 2001 release 
+of the NDK.  If you experience the problems you can temporarily
+work around it by manually adding the missing symbols to your version of 
+"clib.imp".
+

INSTALL.OS2

@@ -0,0 +1,31 @@
+ 
+ Installation on OS/2
+ --------------------
+
+ You need to have the following tools installed:
+
+  * EMX GCC
+  * PERL
+  * GNU make
+
+
+ To build the makefile, run
+
+ > os2\os2-emx
+
+ This will configure OpenSSL and create OS2-EMX.mak which you then use to 
+ build the OpenSSL libraries & programs by running
+
+ > make -f os2-emx.mak
+
+ If that finishes successfully you will find the libraries and programs in the
+ "out" directory.
+
+ Alternatively, you can make a dynamic build that puts the library code into
+ crypto.dll and ssl.dll by running
+
+ > make -f os2-emx-dll.mak
+
+ This will build the above mentioned dlls and a matching pair of import
+ libraries in the "out_dll" directory along with the set of test programs
+ and the openssl application.

INSTALL.VMS

@@ -8,13 +8,54 @@ Intro:
 
 This file is divided in the following parts:
 
+  Requirements			- Mandatory reading.
+  Checking the distribution	- Mandatory reading.
   Compilation			- Mandatory reading.
+  Logical names			- Mandatory reading.
   Test				- Mandatory reading.
   Installation			- Mandatory reading.
   Backward portability		- Read if it's an issue.
   Possible bugs or quirks	- A few warnings on things that
 				  may go wrong or may surprise you.
-  Report			- How to get in touch with me.
+  TODO				- Things that are to come.
+
+
+Requirements:
+=============
+
+To build and install OpenSSL, you will need:
+
+ * DEC C or some other ANSI C compiler.  VAX C is *not* supported.
+   [Note: OpenSSL has only been tested with DEC C.  Compiling with 
+    a different ANSI C compiler may require some work]
+
+Checking the distribution:
+==========================
+
+There have been reports of places where the distribution didn't quite get
+through, for example if you've copied the tree from a NFS-mounted Unix
+mount point.
+
+The easiest way to check if everything got through as it should is to check
+for one of the following files:
+
+	[.CRYPTO]OPENSSLCONF.H_IN
+	[.CRYPTO]OPENSSLCONF_H.IN
+
+They should never exist both at once, but one of them should (preferably
+the first variant).  If you can't find any of those two, something went
+wrong.
+
+The best way to get a correct distribution is to download the gzipped tar
+file from ftp://ftp.openssl.org/source/, use GUNZIP to uncompress it and
+use VMSTAR to unpack the resulting tar file.
+
+GUNZIP is available in many places on the net.  One of the distribution
+points is the WKU software archive, ftp://ftp.wku.edu/vms/fileserv/ .
+
+VMSTAR is also available in many places on the net.  The recommended place
+to find information about it is http://www.free.lp.se/vmstar/ .
+
 
 Compilation:
 ============
@@ -28,35 +69,29 @@ for a command procedure name xxx-LIB.COM (in the library directories)
 or MAKExxx.COM (in the program directories) and read the comments at
 the top to understand how to use them.  However, if you want to
 compile all you can get, the simplest is to use MAKEVMS.COM in the top
-directory.  The syntax is trhe following:
+directory.  The syntax is the following:
 
-  @MAKEVMS <option> <rsaref-p> <debug-p> [<compiler>]
+  @MAKEVMS <option> <bits> <debug-p> [<compiler>]
 
 <option> must be one of the following:
 
       ALL       Just build "everything".
-      DATE      Just build the "[.INCLUDE]DATE.H" file.
+      CONFIG    Just build the "[.CRYPTO]OPENSSLCONF.H" file.
+      BUILDINF  Just build the "[.INCLUDE]BUILDINF.H" file.
       SOFTLINKS Just copies some files, to simulate Unix soft links.
+      BUILDALL  Same as ALL, except CONFIG, BUILDINF and SOFTLINKS aren't done.
       RSAREF    Just build the "[.xxx.EXE.RSAREF]LIBRSAGLUE.OLB" library.
       CRYPTO    Just build the "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" library.
       SSL       Just build the "[.xxx.EXE.SSL]LIBSSL.OLB" library.
       SSL_TASK  Just build the "[.xxx.EXE.SSL]SSL_TASK.EXE" program.
-      TEST      Just build the "test" programs for OpenSSL.
-      APPS      Just build the "application" programs for OpenSSL.
+      TEST      Just build the "[.xxx.EXE.TEST]" test programs for OpenSSL.
+      APPS      Just build the "[.xxx.EXE.APPS]" application programs for OpenSSL.
 
-<rsaref-p> must be one of the following:
+<bits> must be one of the following:
 
-      RSAREF    compile using the RSAREF Library
-      NORSAREF  compile without using RSAREF
-
-Note: The RSAREF libraries are NOT INCLUDED and you have to
-      download it from "ftp://ftp.rsa.com/rsaref".  You have to
-      get the ".tar-Z" file as the ".zip" file dosen't have the
-      directory structure stored.  You have to extract the file
-      into the [.RSAREF] directory as that is where the scripts
-      will look for the files.
-
-Note 2: I have never done this, so I've no idea if it works or not.
+      ""        compile using default pointer size
+      32        compile using 32 bit pointer size
+      64        compile using 64 bit pointer size
 
 <debug-p> must be one of the following:
 
@@ -65,27 +100,45 @@ Note 2: I have never done this, so I've no idea if it works or not.
 
 <compiler> must be one of the following:
 
-      VAXC      For VAX C.
       DECC      For DEC C.
       GNUC      For GNU C.
 
 
-You will find the crypto library in [.xxx.EXE.CRYPTO], called LIBCRYPTO.OLB,
-where xxx is VAX or AXP.  You will find the SSL library in [.xxx.EXE.SSL],
-named LIBSSL.OLB, and you will find a bunch of useful programs in
-[.xxx.EXE.APPS].  However, these shouldn't be used right off unless it's
-just to test them.  For production use, make sure you install first, see
-Installation below.
+You will find the crypto library in [.xxx.EXE.CRYPTO] (where xxx is VAX,
+ALPHA or IA64), called SSL_LIBCRYPTO32.OLB or SSL_LIBCRYPTO.OLB depending
+on how it was built.  You will find the SSL library in [.xxx.EXE.SSL],
+named SSL_LIBSSL32.OLB or SSL_LIBSSL.OLB, and you will find a bunch of
+useful programs in [.xxx.EXE.APPS].  However, these shouldn't be used
+right off unless it's just to test them.  For production use, make sure
+you install first, see Installation below.
 
-Note: Some programs in this package require a TCP/IP library.
+Note 1: Some programs in this package require a TCP/IP library.
 
 Note 2: if you want to compile the crypto library only, please make sure
-        you have at least done a @MAKEVMS DATE and a @MAKEVMS SOFTLINKS.
-        A lot of things will break if you don't.
+        you have at least done a @MAKEVMS CONFIG, a @MAKEVMS BUILDINF and
+        a @MAKEVMS SOFTLINKS.  A lot of things will break if you don't.
+
+
+Logical names:
+==============
+
+There are a few things that can't currently be given through the command
+line.  Instead, logical names are used.
+
+Currently, the logical names supported are:
+
+      OPENSSL_NO_ASM    with value YES, the assembler parts of OpenSSL will
+                        not be used.  Instead, plain C implementations are
+                        used.  This is good to try if something doesn't work.
+      OPENSSL_NO_'alg'  with value YES, the corresponding crypto algorithm
+                        will not be implemented.  Supported algorithms to
+                        do this with are: RSA, DSA, DH, MD2, MD4, MD5, RIPEMD,
+                        SHA, DES, MDC2, CR2, RC4, RC5, IDEA, BF, CAST, HMAC,
+                        SSL2.  So, for example, having the logical name
+                        OPENSSL_NO_RSA with the value YES means that the
+                        LIBCRYPTO.OLB library will not contain an RSA
+                        implementation.
 
-Note 3: Alpha users will get a number of informational messages when
-        compiling the [.asm]vms.mar file in the BN (bignum) part of
-        the crypto library.  These can be safely ignored.
 
 Test:
 =====
@@ -99,17 +152,20 @@ it's an ugly hack!) and rebuild. Please send a bug report to
 <openssl-bugs@openssl.org>, including the output of "openssl version -a"
 and of the failed test.
 
+
 Installation:
 =============
 
 Installation is easy, just do the following:
 
-  @INSTALL <root>
+  @INSTALL <root> <bits>
 
 <root> is the directory in which everything will be installed,
 subdirectories, libraries, header files, programs and startup command
 procedures.
 
+<bits> works the same way as for MAKEVMS.COM
+
 N.B.: INSTALL.COM builds a new directory structure, different from
 the directory tree where you have now build OpenSSL.
 
@@ -130,6 +186,10 @@ following command procedures:
         sets up the symbols to the applications.  Should be called
         from for example SYS$MANAGER:SYLOGIN.COM 
 
+  OPENSSL_UNDO.COM
+
+	deassigns the logical names created with OPENSSL_STARTUP.COM.
+
 The logical names that are set up are the following:
 
   SSLROOT       a dotted concealed logical name pointing at the
@@ -137,7 +197,6 @@ The logical names that are set up are the following:
 
   SSLCERTS      Initially an empty directory, this is the default
 		location for certificate files.
-  SSLMISC	Various scripts.
   SSLPRIVATE	Initially an empty directory, this is the default
 		location for private key files.
 
@@ -145,8 +204,9 @@ The logical names that are set up are the following:
 		programs.
   SSLINCLUDE    Contains the header files needed if you want to
 		compile programs with libcrypto or libssl.
-  SSLLIB        Contains the OpenSSL library files (LIBCRYPTO.OLB
-		and LIBSSL.OLB) themselves.
+  SSLLIB        Contains the OpenSSL library files themselves:
+  		- SSL_LIBCRYPTO32.OLB and SSL_LIBSSL32.OLB or
+		- SSL_LIBCRYPTO.OLB and SSL_LIBSSL.OLB
 
   OPENSSL	Same as SSLINCLUDE.  This is because the standard
 		way to include OpenSSL header files from version
@@ -158,6 +218,7 @@ The logical names that are set up are the following:
 		(the NOTE in section 4 of "Installation in Detail").
 		You don't need to "deleting old header files"!!!
 
+
 Backward portability:
 =====================
 
@@ -175,7 +236,7 @@ dependent on the OpenVMS version or the C library version, *and* you
 can use those macros to simulate older OpenVMS or C library versions,
 by defining the macros _VMS_V6_SOURCE, __VMS_VER and __CTRL_VER with
 correct values.  In the compilation scripts, I've provided the possibility
-for the user to influense the creation of such macros, through a bunch of
+for the user to influence the creation of such macros, through a bunch of
 symbols, all having names starting with USER_.  Here's the list of them:
 
   USER_CCFLAGS		 - Used to give additional qualifiers to the
@@ -197,7 +258,7 @@ following before you start compiling:
 The USER_CCDISABLEWARNINGS is there because otherwise, DEC C will complain
 that those macros have been changed.
 
-Note: Currently, this is only usefull for library compilation.  The
+Note: Currently, this is only useful for library compilation.  The
       programs will still be linked with the current version of the
       C library shareable image, and will thus complain if they are
       faced with an older version of the same C library shareable image.
@@ -212,19 +273,6 @@ directory by default, it may very well be that you have to give them
 extra arguments.  Please experiment.
 
 
-Report:
-=======
-
-I maintain a few mailinglists for bug reports and such on software that
-I develop/port/enhance/destroy.  Please look at http://www.free.lp.se/
-for further info.
-
-
--- 
-Richard Levitte <richard@levitte.org>
-1999-03-09
-
-
 TODO:
 =====
 
@@ -242,4 +290,4 @@ have any ideas.
 
 --
 Richard Levitte <richard@levitte.org>
-1999-05-24
+2000-02-27, 2011-03-18

INSTALL.W32

@@ -2,34 +2,32 @@
  INSTALLATION ON THE WIN32 PLATFORM
  ----------------------------------
 
- Heres a few comments about building OpenSSL in Windows environments. Most of
- this is tested on Win32 but it may also work in Win 3.1 with some
- modification.  See the end of this file for Eric's original comments.
+ [Instructions for building for Windows CE can be found in INSTALL.WCE]
+ [Instructions for building for Win64 can be found in INSTALL.W64]
 
- You need Perl for Win32 (available from http://www.activestate.com/ActivePerl)
- and one of the following C compilers:
+ Here are a few comments about building OpenSSL for Win32 environments,
+ such as Windows NT and Windows 9x. It should be noted though that
+ Windows 9x are not ordinarily tested. Its mention merely means that we
+ attempt to maintain certain programming discipline and pay attention
+ to backward compatibility issues, in other words it's kind of expected
+ to work on Windows 9x, but no regression tests are actually performed.
+
+ On additional note newer OpenSSL versions are compiled and linked with
+ Winsock 2. This means that minimum OS requirement was elevated to NT 4
+ and Windows 98 [there is Winsock 2 update for Windows 95 though].
+
+ - you need Perl for Win32.  Unless you will build on Cygwin, you will need
+   ActiveState Perl, available from http://www.activestate.com/ActivePerl.
+
+ - one of the following C compilers:
 
   * Visual C++
   * Borland C
-  * GNU C (Mingw32 or Cygwin32)
+  * GNU C (Cygwin or MinGW)
 
- If you want to compile in the assembly language routines with Visual C++ then
- you will need an assembler. This is worth doing because it will result in
- faster code: for example it will typically result in a 2 times speedup in the
- RSA routines. Currently the following assemblers are supported:
-
-  * Microsoft MASM (aka "ml")
-  * Free Netwide Assembler NASM.
-
- MASM was I believe distributed in the past with VC++ and it is also part of
- the MSDN SDKs. It is no longer distributed as part of VC++ and can be hard
- to get hold of. It can be purchased: see Microsoft's site for details at:
- http://www.microsoft.com/
-
- NASM is freely available. Version 0.98 was used during testing: other versions
- may also work. It is available from many places, see for example:
- http://www.kernel.org/pub/software/devel/nasm/binaries/win32/
- The NASM binary nasmw.exe needs to be installed anywhere on your PATH.
+- Netwide Assembler, a.k.a. NASM, available from http://nasm.sourceforge.net/
+  is required if you intend to utilize assembler modules. Note that NASM
+  is now the only supported assembler.
 
  If you are compiling from a tarball or a CVS snapshot then the Win32 files
  may well be not up to date. This may mean that some "tweaking" is required to
@@ -39,16 +37,18 @@
  Visual C++
  ----------
 
- Firstly you should run Configure:
+ If you want to compile in the assembly language routines with Visual
+ C++, then you will need already mentioned Netwide Assembler binary,
+ nasmw.exe or nasm.exe, to be available on your %PATH%.
 
- > perl Configure VC-WIN32
+ Firstly you should run Configure with platform VC-WIN32:
 
- Next you need to build the Makefiles and optionally the assembly language
- files:
+ > perl Configure VC-WIN32 --prefix=c:\some\openssl\dir
 
- - If you are using MASM then run:
+ Where the prefix argument specifies where OpenSSL will be installed to.
 
-   > ms\do_masm
+ Next you need to build the Makefiles and optionally the assembly
+ language files:
 
  - If you are using NASM then run:
 
@@ -56,39 +56,62 @@
 
  - If you don't want to use the assembly language files at all then run:
 
+   > perl Configure VC-WIN32 no-asm --prefix=c:/some/openssl/dir
    > ms\do_ms
 
  If you get errors about things not having numbers assigned then check the
- troubleshooting section: you probably wont be able to compile it as it
+ troubleshooting section: you probably won't be able to compile it as it
  stands.
 
  Then from the VC++ environment at a prompt do:
 
  > nmake -f ms\ntdll.mak
 
- If all is well it should compile and you will have some DLLs and executables
- in out32dll. If you want to try the tests then do:
+ If all is well it should compile and you will have some DLLs and
+ executables in out32dll. If you want to try the tests then do:
  
- > cd out32dll
- > ..\ms\test
+ > nmake -f ms\ntdll.mak test
+
+
+ To install OpenSSL to the specified location do:
+
+ > nmake -f ms\ntdll.mak install
 
  Tweaks:
 
- There are various changes you can make to the Win32 compile environment. By
- default the library is not compiled with debugging symbols. If you add 'debug'
- to the mk1mk.pl lines in the do_* batch file then debugging symbols will be
- compiled in.
+ There are various changes you can make to the Win32 compile
+ environment. By default the library is not compiled with debugging
+ symbols. If you use the platform debug-VC-WIN32 instead of VC-WIN32
+ then debugging symbols will be compiled in.
+
+ By default in 1.0.0 OpenSSL will compile builtin ENGINES into the
+ separate shared librariesy. If you specify the "enable-static-engine"
+ option on the command line to Configure the shared library build
+ (ms\ntdll.mak) will compile the engines into libeay32.dll instead.
 
  The default Win32 environment is to leave out any Windows NT specific
  features.
 
- If you want to enable the NT specific features of OpenSSL (currently only the
- logging BIO) follow the instructions above but call the batch file do_nt.bat
- instead of do_ms.bat.
+ If you want to enable the NT specific features of OpenSSL (currently
+ only the logging BIO) follow the instructions above but call the batch
+ file do_nt.bat instead of do_ms.bat.
 
  You can also build a static version of the library using the Makefile
  ms\nt.mak
 
+
+ Borland C++ builder 5
+ ---------------------
+
+ * Configure for building with Borland Builder:
+   > perl Configure BC-32
+
+ * Create the appropriate makefile
+   > ms\do_nasm
+
+ * Build
+   > make -f ms\bcb.mak
+
  Borland C++ builder 3 and 4
  ---------------------------
 
@@ -99,36 +122,128 @@
  * Run make:
    > make -f bcb.mak
 
- GNU C (Mingw32)
- ---------------
+ GNU C (Cygwin)
+ --------------
 
- To build OpenSSL, you need the Mingw32 package and GNU make.
+ Cygwin implements a Posix/Unix runtime system (cygwin1.dll) on top of
+ Win32 subsystem and provides a bash shell and GNU tools environment.
+ Consequently, a make of OpenSSL with Cygwin is virtually identical to
+ Unix procedure. It is also possible to create Win32 binaries that only
+ use the Microsoft C runtime system (msvcrt.dll or crtdll.dll) using
+ MinGW. MinGW can be used in the Cygwin development environment or in a
+ standalone setup as described in the following section.
 
- * Compiler installation:
+ To build OpenSSL using Cygwin:
 
-   Mingw32 is available from <ftp://ftp.xraylith.wisc.edu/pub/khan/gnu-win32/
-   mingw32/egcs-1.1.2/egcs-1.1.2-mingw32.zip>. GNU make is at
-   <ftp://agnes.dida.physik.uni-essen.de/home/janjaap/mingw32/binaries/
-   make-3.76.1.zip>. Install both of them in C:\egcs-1.1.2 and run
-   C:\egcs-1.1.2\mingw32.bat to set the PATH.
+ * Install Cygwin (see http://cygwin.com/)
+
+ * Install Perl and ensure it is in the path. Both Cygwin perl
+   (5.6.1-2 or newer) and ActivePerl work.
+
+ * Run the Cygwin bash shell
+
+ * $ tar zxvf openssl-x.x.x.tar.gz
+   $ cd openssl-x.x.x
+
+   To build the Cygwin version of OpenSSL:
+
+   $ ./config
+   [...]
+   $ make
+   [...]
+   $ make test
+   $ make install
+
+   This will create a default install in /usr/local/ssl.
+
+   To build the MinGW version (native Windows) in Cygwin:
+
+   $ ./Configure mingw
+   [...]
+   $ make
+   [...]
+   $ make test
+   $ make install
+
+ Cygwin Notes:
+
+ "make test" and normal file operations may fail in directories
+ mounted as text (i.e. mount -t c:\somewhere /home) due to Cygwin
+ stripping of carriage returns. To avoid this ensure that a binary
+ mount is used, e.g. mount -b c:\somewhere /home.
+
+ "bc" is not provided in older Cygwin distribution.  This causes a
+ non-fatal error in "make test" but is otherwise harmless.  If
+ desired and needed, GNU bc can be built with Cygwin without change.
+
+ GNU C (MinGW/MSYS)
+ -------------
+
+ * Compiler and shell environment installation:
+
+   MinGW and MSYS are available from http://www.mingw.org/, both are
+   required. Run the installers and do whatever magic they say it takes
+   to start MSYS bash shell with GNU tools on its PATH.
+
+   N.B. Since source tar-ball can contain symbolic links, it's essential
+   that you use accompanying MSYS tar to unpack the source. It will
+   either handle them in one way or another or fail to extract them,
+   which does the trick too. Latter means that you may safely ignore all
+   "cannot create symlink" messages, as they will be "re-created" at
+   configure stage by copying corresponding files. Alternative programs
+   were observed to create empty files instead, which results in build
+   failure.
 
  * Compile OpenSSL:
 
-   > perl Configure Mingw32
-   > ms\mw.bat
+   $ ./config
+   [...]
+   $ make
+   [...]
+   $ make test
 
-   This will create the library and binaries in out.
+   This will create the library and binaries in root source directory
+   and openssl.exe application in apps directory.
+
+   It is also possible to cross-compile it on Linux by configuring
+   with './Configure --cross-compile-prefix=i386-mingw32- mingw ...'.
+   'make test' is naturally not applicable then.
 
    libcrypto.a and libssl.a are the static libraries. To use the DLLs,
    link with libeay32.a and libssl32.a instead.
 
-   See troubleshooting if you get error messages about functions not having
-   a number assigned.
+   See troubleshooting if you get error messages about functions not
+   having a number assigned.
 
- * You can now try the tests:
+ Installation
+ ------------
+
+ If you used the Cygwin procedure above, you have already installed and
+ can skip this section.  For all other procedures, there's currently no real
+ installation procedure for Win32.  There are, however, some suggestions:
+
+    - do nothing.  The include files are found in the inc32/ subdirectory,
+      all binaries are found in out32dll/ or out32/ depending if you built
+      dynamic or static libraries.
+
+    - do as is written in INSTALL.Win32 that comes with modssl:
+
+	$ md c:\openssl 
+	$ md c:\openssl\bin
+	$ md c:\openssl\lib
+	$ md c:\openssl\include
+	$ md c:\openssl\include\openssl
+	$ copy /b inc32\openssl\*       c:\openssl\include\openssl
+	$ copy /b out32dll\ssleay32.lib c:\openssl\lib
+	$ copy /b out32dll\libeay32.lib c:\openssl\lib
+	$ copy /b out32dll\ssleay32.dll c:\openssl\bin
+	$ copy /b out32dll\libeay32.dll c:\openssl\bin
+	$ copy /b out32dll\openssl.exe  c:\openssl\bin
+
+      Of course, you can choose another device than c:.  C: is used here
+      because that's usually the first (and often only) harddisk device.
+      Note: in the modssl INSTALL.Win32, p: is used rather than c:.
 
-   > cd out
-   > ..\ms\test
 
  Troubleshooting
  ---------------
@@ -145,12 +260,16 @@
  assigned in the CVS tree: so anything linked against this version of the
  library may need to be recompiled.
 
- If you get errors about unresolved externals then this means that either you
- didn't read the note above about functions not having numbers assigned or
- someone forgot to add a function to the header file.
+ If you get errors about unresolved symbols there are several possible
+ causes.
 
- In this latter case check out the header file to see if the function is
- defined in the header file.
+ If this happens when the DLL is being linked and you have disabled some
+ ciphers then it is possible the DEF file generator hasn't removed all
+ the disabled symbols: the easiest solution is to edit the DEF files manually
+ to delete them. The DEF files are ms\libeay32.def ms\ssleay32.def.
+
+ Another cause is if you missed or ignored the errors about missing numbers
+ mentioned above.
 
  If you get warnings in the code then the compilation will halt.
 
@@ -165,159 +284,42 @@
 
  One final comment about compiling applications linked to the OpenSSL library.
  If you don't use the multithreaded DLL runtime library (/MD option) your
- program will almost certainly crash: see the original SSLeay description
- below for more details.
+ program will almost certainly crash because malloc gets confused -- the
+ OpenSSL DLLs are statically linked to one version, the application must
+ not use a different one.  You might be able to work around such problems
+ by adding CRYPTO_malloc_init() to your program before any calls to the
+ OpenSSL libraries: This tells the OpenSSL libraries to use the same
+ malloc(), free() and realloc() as the application.  However there are many
+ standard library functions used by OpenSSL that call malloc() internally
+ (e.g. fopen()), and OpenSSL cannot change these; so in general you cannot
+ rely on CRYPTO_malloc_init() solving your problem, and you should
+ consistently use the multithreaded library.
 
---------------------------------------------------------------------------------
-The orignal Windows build instructions from SSLeay follow. 
-Note: some of this may be out of date and no longer applicable. In particular
-the Crypto_malloc_init() comment appears to be wrong: you always need to use
-the same runtime library as the DLL itself.
---------------------------------------------------------------------------------
+ Linking your application
+ ------------------------
 
-The Microsoft World.
+ If you link with static OpenSSL libraries [those built with ms/nt.mak],
+ then you're expected to additionally link your application with
+ WS2_32.LIB, ADVAPI32.LIB, GDI32.LIB and USER32.LIB. Those developing
+ non-interactive service applications might feel concerned about linking
+ with the latter two, as they are justly associated with interactive
+ desktop, which is not available to service processes. The toolkit is
+ designed to detect in which context it's currently executed, GUI,
+ console app or service, and act accordingly, namely whether or not to
+ actually make GUI calls. Additionally those who wish to
+ /DELAYLOAD:GDI32.DLL and /DELAYLOAD:USER32.DLL and actually keep them
+ off service process should consider implementing and exporting from
+ .exe image in question own _OPENSSL_isservice not relying on USER32.DLL.
+ E.g., on Windows Vista and later you could:
 
-The good news, to build SSLeay for the Microsft World
-
-Windows 3.1 DLL's
-perl Configure VC-WIN16
-nmake -f ms\w31dll.mak
-
-Windows NT/95 DLL's
-perl Configure VC-WIN32
-nmake -f ms\ntdll.mak
-
-Now the bad news
-All builds were done using Microsofts Visual C++ 1.52c and [45].x.
-If you are a borland person, you are probably going to have to help me
-finish the stuff in util/pl/BC*pl
-
-All builds were made under Windows NT - this means long filenames, so
-you may have problems under Windows 3.1 but probably not under 95.
-
-Because file pointers don't work in DLL's under Windows 3.1 (well at
-least stdin/stdout don't and I don't like having to differentiate
-between these and other file pointers), I now use the BIO file-pointer
-module, which needs to be linked into your application.  You can either
-use the memory buffer BIO for IO, or compile bss_file.c into your
-application, it is in the apps directory and is just a copy of
-crypto/buffer/bss_file.c with #define APPS_WIN16 added.
-I have not yet automated the makefile to automatically copy it into 'out'
-for a win 3.1 build....
-
-All callbacks passed into SSLeay for Windows 3.1 need to be of type
-_far _loadds.
-
-I don't support building with the pascal calling convention.
-
-The DLL and static builds are large memory model.
-
-To build static libraries for NT/95 or win 3.1
-
-perl util/mk1mf.pl VC-WIN32 > mf-stat.nt
-perl util/mk1mf.pl VC-WIN16 > mf-stat.w31
-for DLL's
-perl util/mk1mf.pl dll VC-WIN32	> mf-dll.nt
-perl util/mk1mf.pl dll VC-WIN16 > mf-dll.w31
-
-Again you will notice that if you dont have perl, you cannot do this.
-
-Now the next importaint issue.  Running Configure!
-I have small assember code files for critical big number library operation
-in crypto/bn/asm.  There is, asm code, object files and uuencode
-object files.  They are
-x86nt32.asm	- 32bit flat memory model assember - suitable Win32
-x86w16.asm	- 16bit assember - used in the msdos build.
-x86w32.asm	- 32bit assember, win 3.1 segments, used for win16 build.
-
-If you feel compelled to build the 16bit maths routines in the windows 3.1
-build,
-perl Configure VC-W31-16
-perl util/mk1mf.pl dll VC-W31-16 > mf-dll.w31
-
-If you hate assember and don't want anything to do with it,
-perl util/mk1mf.pl no-asm VC-WIN16 > mf-dll.w31
-will work for any of the makefile generations.
-
-There are more options to mk1mf.pl but these all leave the temporary
-files in 'tmp' and the output files in 'out' by default.
-
-The NT build is done for console mode.
-
-The Windows 3.1 version of SSLeay uses quickwin, the interface is ugly
-but it is better than nothing.  If you want ugly, try doing anything
-that involves getting a password.  I decided to be ugly instead of
-echoing characters.  For Windows 3.1 I would just sugest using the
-msdos version of the ssleay application for command line work.
-The QuickWin build is primarily for testing.
-
-For both NT and Windows 3.1, I have not written the code so that
-s_client, s_server can take input from the keyboard.  You can happily
-start applications up in separate windows, watch them handshake, and then sit
-there for-ever.  I have not had the time to get this working, and I've
-been able to test things from a unix box to the NT box :-).
-Try running ssleay s_server on the windows box
-(with either -cert ../apps/server.pem -www)
-and run ssleay s_time from another window.
-This often stuffs up on Windows 3.1, but I'm not worried since this is
-probably a problem with my demo applications, not the libraries.
-
-After a build of one of the version of microsoft SSLeay,
-'cd ms' and then run 'test'.  This should check everything out and
-even does a trial run of generating certificates.
-'test.bat' requires that perl be install, you be in the ms directory
-(not the test directory, thats for unix so stay out :-) and that the
-build output directory be ../out 
-
-On a last note, you will probably get division by zero errors and
-stuff after a build.  This is due to your own inability to follow
-instructions :-).
-
-The reasons for the problem is probably one of the following.
-
-1)	You did not run Configure.  This is critical for windows 3.1 when
-	using assember.  The values in crypto/bn/bn.h must match the
-	ones requred for the assember code.  (remember that if you
-	edit crypto/bn/bn.h by hand, it will be clobered the next time
-	you run Configure by the contents of crypto/bn/bn.org).
-	SSLeay version -o will list the compile options.
-	For VC-WIN32 you need bn(64,32) or bn(32,32)
-	For VC-W31-32/VC-WIN16 you need bn(32,32)
-	For VC-W31-16 you need bn(32,16) or bn(16,16)
-	For VC-MSDOS you need bn(32,16) or bn(16,16).
-
-	The first number will be 2 times bigger than the second if
-	BN_LLONG is defined in bn.h and the size of the second number
-	depends on the 'bits' defined at the start of bn.h.  Have a
-	look, it's all reasonably clear.
-	If you want to start messing with 8 bit builds and things like
-	that, build without the assember by re-generating a makefile
-	via 'perl util/mk1mf.pl no-asm'.
-2)	You tried to build under MS-DOS or Windows 3.1 using the /G3
-	option.  Don't.  It is buggy (thats why you just got that
-	error) and unless you want to work out which optimising flag
-	to turn off, I'm not going to help you :-).  I also noticed
-	that code often ran slower when compiled with /G3.
-3)	Under NT/95, malloc goes stupid.  You are probably linking with
-	the wrong library, there are problems if you mix the threaded
-	and non-threaded libraries (due to the DLL being staticly
-	linked with one and the applicaion using another.
-
-Well hopefully thats most of the MS issues handled, see you in ssl-users :-).
-
-eric 30-Aug-1996
-
-SSLeay 0.6.5
-For Windows 95/NT, add CRYPTO_malloc_init() to your program before any
-calls to the SSLeay libraries.  This function will insert callbacks so that
-the SSLeay libraries will use the same malloc(), free() and realloc() as
-your application so 'problem 3)' mentioned above will go away.
-
-There is now DES assember for Windows NT/95.  The file is
-crypto/des/asm/win32.asm and replaces crypto/des/des_enc.c in the build.
-
-There is also Blowfish assember for Windows NT/95.  The file is
-crypto/bf/asm/win32.asm and replaces crypto/bf/bf_enc.c in the build.
-
-eric 25-Jun-1997
+	__declspec(dllexport) __cdecl BOOL _OPENSSL_isservice(void)
+	{   DWORD sess;
+	    if (ProcessIdToSessionId(GetCurrentProcessId(),&sess))
+	        return sess==0;
+	    return FALSE;
+	}
 
+ If you link with OpenSSL .DLLs, then you're expected to include into
+ your application code small "shim" snippet, which provides glue between
+ OpenSSL BIO layer and your compiler run-time. Look up OPENSSL_Applink
+ reference page for further details.

INSTALL.W64

@@ -0,0 +1,66 @@
+
+ INSTALLATION ON THE WIN64 PLATFORM
+ ----------------------------------
+
+ Caveat lector
+ -------------
+
+ As of moment of this writing Win64 support is classified "initial"
+ for the following reasons.
+
+ - No assembler modules are engaged upon initial 0.9.8 release.
+ - API might change within 0.9.8 life-span, *but* in a manner which
+   doesn't break backward binary compatibility. Or in other words,
+   application programs compiled with initial 0.9.8 headers will
+   be expected to work with future minor release .DLL without need
+   to re-compile, even if future minor release features modified API.
+ - Above mentioned API modifications have everything to do with
+   elimination of a number of limitations, which are normally
+   considered inherent to 32-bit platforms. Which in turn is why they
+   are treated as limitations on 64-bit platform such as Win64:-)
+   The current list comprises [but not necessarily limited to]:
+
+   - null-terminated strings may not be longer than 2G-1 bytes,
+     longer strings are treated as zero-length;
+   - dynamically and *internally* allocated chunks can't be larger
+     than 2G-1 bytes;
+   - inability to encrypt/decrypt chunks of data larger than 4GB
+     [it's possibly to *hash* chunks of arbitrary size through];
+
+   Neither of these is actually big deal and hardly encountered
+   in real-life applications.
+
+ Compiling procedure
+ -------------------
+
+ You will need Perl. You can run under Cygwin or you can download
+ ActiveState Perl from http://www.activestate.com/ActivePerl.
+
+ You will need Microsoft Platform SDK, available for download at
+ http://www.microsoft.com/msdownload/platformsdk/sdkupdate/. As per
+ April 2005 Platform SDK is equipped with Win64 compilers, as well
+ as assemblers, but it might change in the future.
+
+ To build for Win64/x64:
+
+ > perl Configure VC-WIN64A
+ > ms\do_win64a
+ > nmake -f ms\ntdll.mak
+ > cd out32dll
+ > ..\ms\test
+
+ To build for Win64/IA64:
+
+ > perl Configure VC-WIN64I
+ > ms\do_win64i
+ > nmake -f ms\ntdll.mak
+ > cd out32dll
+ > ..\ms\test
+
+ Naturally test-suite itself has to be executed on the target platform.
+
+ Installation
+ ------------
+
+ TBD, for now see INSTALL.W32.
+

INSTALL.WCE

@@ -0,0 +1,95 @@
+ 
+ INSTALLATION FOR THE WINDOWS CE PLATFORM
+ ----------------------------------------
+
+ Building OpenSSL for Windows CE requires the following external tools:
+
+  * Microsoft eMbedded Visual C++ 3.0 or later
+  * Appropriate SDK might be required
+  * Perl for Win32 [commonly recommended ActiveState Perl is available
+    from http://www.activestate.com/Products/ActivePerl/]
+
+  * wcecompat compatibility library available at
+    http://www.essemer.com.au/windowsce/
+  * Optionally ceutils for running automated tests (same location)
+
+  _or_
+
+  * PocketConsole driver and PortSDK available at
+    http://www.symbolictools.de/public/pocketconsole/
+  * CMD command interpreter (same location)
+
+ As Windows CE support in OpenSSL relies on 3rd party compatibility
+ library, it's appropriate to check corresponding URL for updates. For
+ example if you choose wcecompat, note that as for the moment of this
+ writing version 1.2 is available and actually required for WCE 4.2
+ and newer platforms. All wcecompat issues should be directed to
+ www.essemer.com.au.
+
+ Why compatibility library at all? The C Runtime Library implementation
+ for Windows CE that is included with Microsoft eMbedded Visual C++ is
+ incomplete and in some places incorrect.  Compatibility library plugs
+ the holes and tries to bring the Windows CE CRT to [more] usable level.
+ Most gaping hole in CRT is support for stdin/stdout/stderr IO, which
+ proposed compatibility libraries solve in two different ways: wcecompat
+ redirects IO to active sync link, while PortSDK - to NT-like console
+ driver on the handheld itself.
+
+ Building
+ --------
+
+ Setup the eMbedded Visual C++ environment.  There are batch files for doing
+ this installed with eVC++.  For an ARM processor, for example, execute:
+
+ > "C:\Program Files\Microsoft eMbedded Tools\EVC\WCE300\BIN\WCEARM.BAT"
+
+ Next pick compatibility library according to your preferences.
+
+ 1. To choose wcecompat set up WCECOMPAT environment variable pointing
+    at the location of wcecompat tree "root":
+
+    > set WCECOMPAT=C:\wcecompat
+    > set PORTSDK_LIBPATH=
+
+ 2. To choose PortSDK set up PORTSDK_LIBPATH to point at hardware-
+    specific location where your portlib.lib is installed:
+
+    > set PORTSDK_LIBPATH=C:\PortSDK\lib\ARM
+    > set WCECOMPAT=
+
+ Note that you may not set both variables.
+
+ Next you should run Configure:
+
+ > perl Configure VC-CE
+
+ Next you need to build the Makefiles:
+
+ > ms\do_ms
+
+ If you get errors about things not having numbers assigned then check the
+ troubleshooting section in INSTALL.W32: you probably won't be able to compile
+ it as it stands.
+
+ Then from the VC++ environment at a prompt do:
+
+   > nmake -f ms\cedll.mak
+
+ [note that static builds are not supported under CE]
+
+ If all is well it should compile and you will have some DLLs and executables
+ in out32dll*. 
+
+ <<< everyting below needs revision in respect to wcecompat vs. PortSDK >>>
+
+ If you want
+ to try the tests then make sure the ceutils are in the path and do:
+ 
+ > cd out32
+ > ..\ms\testce
+
+ This will copy each of the test programs to the Windows CE device and execute
+ them, displaying the output of the tests on this computer.  The output should
+ look similar to the output produced by running the tests for a regular Windows
+ build.
+

LICENSE

@@ -12,7 +12,7 @@
   ---------------
 
 /* ====================================================================
- * Copyright (c) 1998-1999 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2011 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions

MacOS/GUSI_Init.cpp

@@ -0,0 +1,62 @@
+/**************** BEGIN GUSI CONFIGURATION ****************************
+ *
+ * GUSI Configuration section generated by GUSI Configurator
+ * last modified: Wed Jan  5 20:33:51 2000
+ *
+ * This section will be overwritten by the next run of Configurator.
+ */
+
+#define GUSI_SOURCE
+#include <GUSIConfig.h>
+#include <sys/cdefs.h>
+
+/* Declarations of Socket Factories */
+
+__BEGIN_DECLS
+void GUSIwithInetSockets();
+void GUSIwithLocalSockets();
+void GUSIwithMTInetSockets();
+void GUSIwithMTTcpSockets();
+void GUSIwithMTUdpSockets();
+void GUSIwithOTInetSockets();
+void GUSIwithOTTcpSockets();
+void GUSIwithOTUdpSockets();
+void GUSIwithPPCSockets();
+void GUSISetupFactories();
+__END_DECLS
+
+/* Configure Socket Factories */
+
+void GUSISetupFactories()
+{
+#ifdef GUSISetupFactories_BeginHook
+	GUSISetupFactories_BeginHook
+#endif
+	GUSIwithInetSockets();
+#ifdef GUSISetupFactories_EndHook
+	GUSISetupFactories_EndHook
+#endif
+}
+
+/* Declarations of File Devices */
+
+__BEGIN_DECLS
+void GUSIwithDConSockets();
+void GUSIwithNullSockets();
+void GUSISetupDevices();
+__END_DECLS
+
+/* Configure File Devices */
+
+void GUSISetupDevices()
+{
+#ifdef GUSISetupDevices_BeginHook
+	GUSISetupDevices_BeginHook
+#endif
+	GUSIwithNullSockets();
+#ifdef GUSISetupDevices_EndHook
+	GUSISetupDevices_EndHook
+#endif
+}
+
+/**************** END GUSI CONFIGURATION *************************/

MacOS/GetHTTPS.src/CPStringUtils.hpp

@@ -0,0 +1,104 @@
+#pragma once
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void CopyPStrToCStr(const unsigned char *thePStr,char *theCStr,const int maxCStrLength);
+void CopyPStrToPStr(const unsigned char *theSrcPStr,unsigned char *theDstPStr,const int maxDstStrLength);
+void CopyCStrToCStr(const char *theSrcCStr,char *theDstCStr,const int maxDstStrLength);
+void CopyCStrToPStr(const char *theSrcCStr,unsigned char *theDstPStr,const int maxDstStrLength);
+void ConcatPStrToCStr(const unsigned char *thePStr,char *theCStr,const int maxCStrLength);
+void ConcatPStrToPStr(const unsigned char *theSrcPStr,unsigned char *theDstPStr,const int maxDstStrLength);
+void ConcatCStrToPStr(const char *theSrcCStr,unsigned char *theDstPStr,const int maxDstStrLength);
+void ConcatCStrToCStr(const char *theSrcCStr,char *theDstCStr,const int maxCStrLength);
+
+void ConcatCharToCStr(const char theChar,char *theDstCStr,const int maxCStrLength);
+void ConcatCharToPStr(const char theChar,unsigned char *theDstPStr,const int maxPStrLength);
+
+int ComparePStrs(const unsigned char *theFirstPStr,const unsigned char *theSecondPStr,const Boolean ignoreCase = true);
+int CompareCStrs(const char *theFirstCStr,const char *theSecondCStr,const Boolean ignoreCase = true);
+int CompareCStrToPStr(const char *theCStr,const unsigned char *thePStr,const Boolean ignoreCase = true);
+
+Boolean CStrsAreEqual(const char *theFirstCStr,const char *theSecondCStr,const Boolean ignoreCase = true);
+Boolean PStrsAreEqual(const unsigned char *theFirstCStr,const unsigned char *theSecondCStr,const Boolean ignoreCase = true);
+
+void CopyLongIntToCStr(const long theNum,char *theCStr,const int maxCStrLength,const int numDigits = -1);
+void CopyUnsignedLongIntToCStr(const unsigned long theNum,char *theCStr,const int maxCStrLength);
+void ConcatLongIntToCStr(const long theNum,char *theCStr,const int maxCStrLength,const int numDigits = -1);
+void CopyCStrAndConcatLongIntToCStr(const char *theSrcCStr,const long theNum,char *theDstCStr,const int maxDstStrLength);
+
+void CopyLongIntToPStr(const long theNum,unsigned char *thePStr,const int maxPStrLength,const int numDigits = -1);
+void ConcatLongIntToPStr(const long theNum,unsigned char *thePStr,const int maxPStrLength,const int numDigits = -1);
+
+long CStrLength(const char *theCString);
+long PStrLength(const unsigned char *thePString);
+
+OSErr CopyCStrToExistingHandle(const char *theCString,Handle theHandle);
+OSErr CopyLongIntToExistingHandle(const long inTheLongInt,Handle theHandle);
+
+OSErr CopyCStrToNewHandle(const char *theCString,Handle *theHandle);
+OSErr CopyPStrToNewHandle(const unsigned char *thePString,Handle *theHandle);
+OSErr CopyLongIntToNewHandle(const long inTheLongInt,Handle *theHandle);
+
+OSErr AppendCStrToHandle(const char *theCString,Handle theHandle,long *currentLength = nil,long *maxLength = nil);
+OSErr AppendCharsToHandle(const char *theChars,const int numChars,Handle theHandle,long *currentLength = nil,long *maxLength = nil);
+OSErr AppendPStrToHandle(const unsigned char *thePString,Handle theHandle,long *currentLength = nil);
+OSErr AppendLongIntToHandle(const long inTheLongInt,Handle theHandle,long *currentLength = nil);
+
+void ZeroMem(void *theMemPtr,const unsigned long numBytes);
+
+char *FindCharInCStr(const char theChar,const char *theCString);
+long FindCharOffsetInCStr(const char theChar,const char *theCString,const Boolean inIgnoreCase = false);
+long FindCStrOffsetInCStr(const char *theCSubstring,const char *theCString,const Boolean inIgnoreCase = false);
+
+void CopyCSubstrToCStr(const char *theSrcCStr,const int maxCharsToCopy,char *theDstCStr,const int maxDstStrLength);
+void CopyCSubstrToPStr(const char *theSrcCStr,const int maxCharsToCopy,unsigned char *theDstPStr,const int maxDstStrLength);
+
+void InsertCStrIntoCStr(const char *theSrcCStr,const int theInsertionOffset,char *theDstCStr,const int maxDstStrLength);
+void InsertPStrIntoCStr(const unsigned char *theSrcPStr,const int theInsertionOffset,char *theDstCStr,const int maxDstStrLength);
+OSErr InsertCStrIntoHandle(const char *theCString,Handle theHandle,const long inInsertOffset);
+
+void CopyCStrAndInsertCStrIntoCStr(const char *theSrcCStr,const char *theInsertCStr,char *theDstCStr,const int maxDstStrLength);
+
+void CopyCStrAndInsertCStrsLongIntsIntoCStr(const char *theSrcCStr,const char **theInsertCStrs,const long *theLongInts,char *theDstCStr,const int maxDstStrLength);
+
+void CopyCStrAndInsert1LongIntIntoCStr(const char *theSrcCStr,const long theNum,char *theDstCStr,const int maxDstStrLength);
+void CopyCStrAndInsert2LongIntsIntoCStr(const char *theSrcCStr,const long long1,const long long2,char *theDstCStr,const int maxDstStrLength);
+void CopyCStrAndInsert3LongIntsIntoCStr(const char *theSrcCStr,const long long1,const long long2,const long long3,char *theDstCStr,const int maxDstStrLength);
+
+void CopyCStrAndInsertCStrLongIntIntoCStr(const char *theSrcCStr,const char *theInsertCStr,const long theNum,char *theDstCStr,const int maxDstStrLength);
+OSErr CopyCStrAndInsertCStrLongIntIntoHandle(const char *theSrcCStr,const char *theInsertCStr,const long theNum,Handle *theHandle);
+
+
+OSErr CopyIndexedWordToCStr(char *theSrcCStr,int whichWord,char *theDstCStr,int maxDstCStrLength);
+OSErr CopyIndexedWordToNewHandle(char *theSrcCStr,int whichWord,Handle *outTheHandle);
+
+OSErr CopyIndexedLineToCStr(const char *theSrcCStr,int inWhichLine,int *lineEndIndex,Boolean *gotLastLine,char *theDstCStr,const int maxDstCStrLength);
+OSErr CopyIndexedLineToNewHandle(const char *theSrcCStr,int inWhichLine,Handle *outNewHandle);
+
+OSErr ExtractIntFromCStr(const char *theSrcCStr,int *outInt,Boolean skipLeadingSpaces = true);
+OSErr ExtractIntFromPStr(const unsigned char *theSrcPStr,int *outInt,Boolean skipLeadingSpaces = true);
+
+
+void ConvertCStrToUpperCase(char *theSrcCStr);
+
+
+int CountOccurencesOfCharInCStr(const char inChar,const char *inSrcCStr);
+int CountWordsInCStr(const char *inSrcCStr);
+
+OSErr CountDigits(const char *inCStr,int *outNumIntegerDigits,int *outNumFractDigits);
+
+void ExtractCStrItemFromCStr(const char *inSrcCStr,const char inItemDelimiter,const int inItemNumber,Boolean *foundItem,char *outDstCharPtr,const int inDstCharPtrMaxLength,const Boolean inTreatMultipleDelimsAsSingleDelim = false);
+OSErr ExtractCStrItemFromCStrIntoNewHandle(const char *inSrcCStr,const char inItemDelimiter,const int inItemNumber,Boolean *foundItem,Handle *outNewHandle,const Boolean inTreatMultipleDelimsAsSingleDelim = false);
+
+
+OSErr ExtractFloatFromCStr(const char *inCString,extended80 *outFloat);
+OSErr CopyFloatToCStr(const extended80 *theFloat,char *theCStr,const int maxCStrLength,const int inMaxNumIntDigits = -1,const int inMaxNumFractDigits = -1);
+
+void SkipWhiteSpace(char **ioSrcCharPtr,const Boolean inStopAtEOL = false);
+
+
+#ifdef __cplusplus
+}
+#endif

MacOS/GetHTTPS.src/ErrorHandling.cpp

@@ -0,0 +1,170 @@
+/* ====================================================================
+ * Copyright (c) 1998-1999 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+ 
+ 
+ 
+ #include "ErrorHandling.hpp"
+#include "CPStringUtils.hpp"
+
+#ifdef __EXCEPTIONS_ENABLED__
+	#include "CMyException.hpp"
+#endif
+
+
+static char					gErrorMessageBuffer[512];
+
+char 						*gErrorMessage = gErrorMessageBuffer;
+int							gErrorMessageMaxLength = sizeof(gErrorMessageBuffer);
+
+
+
+void SetErrorMessage(const char *theErrorMessage)
+{
+	if (theErrorMessage != nil)
+	{
+		CopyCStrToCStr(theErrorMessage,gErrorMessage,gErrorMessageMaxLength);
+	}
+}
+
+
+void SetErrorMessageAndAppendLongInt(const char *theErrorMessage,const long theLongInt)
+{
+	if (theErrorMessage != nil)
+	{
+		CopyCStrAndConcatLongIntToCStr(theErrorMessage,theLongInt,gErrorMessage,gErrorMessageMaxLength);
+	}
+}
+
+void SetErrorMessageAndCStrAndLongInt(const char *theErrorMessage,const char * theCStr,const long theLongInt)
+{
+	if (theErrorMessage != nil)
+	{
+		CopyCStrAndInsertCStrLongIntIntoCStr(theErrorMessage,theCStr,theLongInt,gErrorMessage,gErrorMessageMaxLength);
+	}
+
+}
+
+void SetErrorMessageAndCStr(const char *theErrorMessage,const char * theCStr)
+{
+	if (theErrorMessage != nil)
+	{
+		CopyCStrAndInsertCStrLongIntIntoCStr(theErrorMessage,theCStr,-1,gErrorMessage,gErrorMessageMaxLength);
+	}
+}
+
+
+void AppendCStrToErrorMessage(const char *theErrorMessage)
+{
+	if (theErrorMessage != nil)
+	{
+		ConcatCStrToCStr(theErrorMessage,gErrorMessage,gErrorMessageMaxLength);
+	}
+}
+
+
+void AppendLongIntToErrorMessage(const long theLongInt)
+{
+	ConcatLongIntToCStr(theLongInt,gErrorMessage,gErrorMessageMaxLength);
+}
+
+
+
+char *GetErrorMessage(void)
+{
+	return gErrorMessage;
+}
+
+
+OSErr GetErrorMessageInNewHandle(Handle *inoutHandle)
+{
+OSErr		errCode;
+
+
+	errCode = CopyCStrToNewHandle(gErrorMessage,inoutHandle);
+	
+	return(errCode);
+}
+
+
+OSErr GetErrorMessageInExistingHandle(Handle inoutHandle)
+{
+OSErr		errCode;
+
+
+	errCode = CopyCStrToExistingHandle(gErrorMessage,inoutHandle);
+	
+	return(errCode);
+}
+
+
+
+OSErr AppendErrorMessageToHandle(Handle inoutHandle)
+{
+OSErr		errCode;
+
+
+	errCode = AppendCStrToHandle(gErrorMessage,inoutHandle,nil);
+	
+	return(errCode);
+}
+
+
+#ifdef __EXCEPTIONS_ENABLED__
+
+void ThrowErrorMessageException(void)
+{
+	ThrowDescriptiveException(gErrorMessage);
+}
+
+#endif

MacOS/GetHTTPS.src/ErrorHandling.hpp

@@ -0,0 +1,147 @@
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef kGenericError
+	#define kGenericError		-1
+#endif
+
+extern char	*gErrorMessage;
+
+
+void SetErrorMessage(const char *theErrorMessage);
+void SetErrorMessageAndAppendLongInt(const char *theErrorMessage,const long theLongInt);
+void SetErrorMessageAndCStrAndLongInt(const char *theErrorMessage,const char * theCStr,const long theLongInt);
+void SetErrorMessageAndCStr(const char *theErrorMessage,const char * theCStr);
+void AppendCStrToErrorMessage(const char *theErrorMessage);
+void AppendLongIntToErrorMessage(const long theLongInt);
+
+
+char *GetErrorMessage(void);
+OSErr GetErrorMessageInNewHandle(Handle *inoutHandle);
+OSErr GetErrorMessageInExistingHandle(Handle inoutHandle);
+OSErr AppendErrorMessageToHandle(Handle inoutHandle);
+
+
+#ifdef __EXCEPTIONS_ENABLED__
+	void ThrowErrorMessageException(void);
+#endif
+
+
+
+//	A bunch of evil macros that would be unnecessary if I were always using C++ !
+
+#define SetErrorMessageAndBailIfNil(theArg,theMessage)								\
+{																					\
+	if (theArg == nil)																\
+	{																				\
+		SetErrorMessage(theMessage);												\
+		errCode = kGenericError;													\
+		goto EXITPOINT;																\
+	}																				\
+}
+
+
+#define SetErrorMessageAndBail(theMessage)											\
+{																					\
+		SetErrorMessage(theMessage);												\
+		errCode = kGenericError;													\
+		goto EXITPOINT;																\
+}
+
+
+#define SetErrorMessageAndLongIntAndBail(theMessage,theLongInt)						\
+{																					\
+		SetErrorMessageAndAppendLongInt(theMessage,theLongInt);						\
+		errCode = kGenericError;													\
+		goto EXITPOINT;																\
+}
+
+
+#define SetErrorMessageAndLongIntAndBailIfError(theErrCode,theMessage,theLongInt)	\
+{																					\
+	if (theErrCode != noErr)														\
+	{																				\
+		SetErrorMessageAndAppendLongInt(theMessage,theLongInt);						\
+		errCode = theErrCode;														\
+		goto EXITPOINT;																\
+	}																				\
+}
+
+
+#define SetErrorMessageCStrLongIntAndBailIfError(theErrCode,theMessage,theCStr,theLongInt)	\
+{																					\
+	if (theErrCode != noErr)														\
+	{																				\
+		SetErrorMessageAndCStrAndLongInt(theMessage,theCStr,theLongInt);			\
+		errCode = theErrCode;														\
+		goto EXITPOINT;																\
+	}																				\
+}
+
+
+#define SetErrorMessageAndCStrAndBail(theMessage,theCStr)							\
+{																					\
+	SetErrorMessageAndCStr(theMessage,theCStr);										\
+	errCode = kGenericError;														\
+	goto EXITPOINT;																	\
+}
+
+
+#define SetErrorMessageAndBailIfError(theErrCode,theMessage)						\
+{																					\
+	if (theErrCode != noErr)														\
+	{																				\
+		SetErrorMessage(theMessage);												\
+		errCode = theErrCode;														\
+		goto EXITPOINT;																\
+	}																				\
+}
+
+
+#define SetErrorMessageAndLongIntAndBailIfNil(theArg,theMessage,theLongInt)			\
+{																					\
+	if (theArg == nil)																\
+	{																				\
+		SetErrorMessageAndAppendLongInt(theMessage,theLongInt);						\
+		errCode = kGenericError;													\
+		goto EXITPOINT;																\
+	}																				\
+}
+
+
+#define BailIfError(theErrCode)														\
+{																					\
+	if ((theErrCode) != noErr)														\
+	{																				\
+		goto EXITPOINT;																\
+	}																				\
+}
+
+
+#define SetErrCodeAndBail(theErrCode)												\
+{																					\
+	errCode = theErrCode;															\
+																					\
+	goto EXITPOINT;																	\
+}
+
+
+#define SetErrorCodeAndMessageAndBail(theErrCode,theMessage)						\
+{																					\
+	SetErrorMessage(theMessage);													\
+	errCode = theErrCode;															\
+	goto EXITPOINT;																	\
+}
+
+
+#define BailNow()																	\
+{																					\
+	errCode = kGenericError;														\
+	goto EXITPOINT;																	\
+}
+
+
+#ifdef __cplusplus
+}
+#endif

MacOS/GetHTTPS.src/GetHTTPS.cpp

@@ -0,0 +1,209 @@
+/*
+ *	An demo illustrating how to retrieve a URI from a secure HTTP server.
+ *
+ *	Author: 	Roy Wood
+ *	Date:		September 7, 1999
+ *	Comments:	This relies heavily on my MacSockets library.
+ *				This project is also set up so that it expects the OpenSSL source folder (0.9.4 as I write this)
+ *				to live in a folder called "OpenSSL-0.9.4" in this project's parent folder.  For example:
+ *
+ *					Macintosh HD:
+ *						Development:
+ *							OpenSSL-0.9.4:
+ *								(OpenSSL sources here)
+ *							OpenSSL Example:
+ *								(OpenSSL example junk here)
+ *
+ *
+ *				Also-- before attempting to compile this, make sure the aliases in "OpenSSL-0.9.4:include:openssl" 
+ *				are installed!  Use the AppleScript applet in the "openssl-0.9.4" folder to do this!
+ */
+/* modified to seed the PRNG */
+/* modified to use CRandomizer for seeding */
+
+
+//	Include some funky libs I've developed over time
+
+#include "CPStringUtils.hpp"
+#include "ErrorHandling.hpp"
+#include "MacSocket.h"
+#include "Randomizer.h"
+
+//	We use the OpenSSL implementation of SSL....
+//	This was a lot of work to finally get going, though you wouldn't know it by the results!
+
+#include <openssl/ssl.h>
+#include <openssl/err.h>
+
+#include <timer.h>
+
+//	Let's try grabbing some data from here:
+
+#define kHTTPS_DNS		"www.apache-ssl.org"
+#define kHTTPS_Port		443
+#define kHTTPS_URI		"/"
+
+
+//	Forward-declare this
+
+OSErr MyMacSocket_IdleWaitCallback(void *inUserRefPtr);
+
+//	My idle-wait callback.  Doesn't do much, does it?  Silly cooperative multitasking.
+
+OSErr MyMacSocket_IdleWaitCallback(void *inUserRefPtr)
+{
+#pragma unused(inUserRefPtr)
+
+EventRecord		theEvent;
+	::EventAvail(everyEvent,&theEvent);
+	
+	CRandomizer *randomizer = (CRandomizer*)inUserRefPtr;
+	if (randomizer)
+		randomizer->PeriodicAction();
+
+	return(noErr);
+}
+
+
+//	Finally!
+
+void main(void)
+{
+	OSErr				errCode;
+	int					theSocket = -1;
+	int					theTimeout = 30;
+
+	SSL_CTX				*ssl_ctx = nil;
+	SSL					*ssl = nil;
+
+	char				tempString[256];
+	UnsignedWide		microTickCount;
+
+
+	CRandomizer randomizer;
+	
+	printf("OpenSSL Demo by Roy Wood, roy@centricsystems.ca\n\n");
+	
+	BailIfError(errCode = MacSocket_Startup());
+
+
+
+	//	Create a socket-like object
+	
+	BailIfError(errCode = MacSocket_socket(&theSocket,false,theTimeout * 60,MyMacSocket_IdleWaitCallback,&randomizer));
+
+	
+	//	Set up the connect string and try to connect
+	
+	CopyCStrAndInsertCStrLongIntIntoCStr("%s:%ld",kHTTPS_DNS,kHTTPS_Port,tempString,sizeof(tempString));
+	
+	printf("Connecting to %s....\n",tempString);
+
+	BailIfError(errCode = MacSocket_connect(theSocket,tempString));
+	
+	
+	//	Init SSL stuff
+	
+	SSL_load_error_strings();
+	
+	SSLeay_add_ssl_algorithms();
+	
+	
+	//	Pick the SSL method
+	
+//	ssl_ctx = SSL_CTX_new(SSLv2_client_method());
+	ssl_ctx = SSL_CTX_new(SSLv23_client_method());
+//	ssl_ctx = SSL_CTX_new(SSLv3_client_method());
+			
+
+	//	Create an SSL thingey and try to negotiate the connection
+	
+	ssl = SSL_new(ssl_ctx);
+	
+	SSL_set_fd(ssl,theSocket);
+	
+	errCode = SSL_connect(ssl);
+	
+	if (errCode < 0)
+	{
+		SetErrorMessageAndLongIntAndBail("OpenSSL: Can't initiate SSL connection, SSL_connect() = ",errCode);
+	}
+	
+	//	Request the URI from the host
+	
+	CopyCStrToCStr("GET ",tempString,sizeof(tempString));
+	ConcatCStrToCStr(kHTTPS_URI,tempString,sizeof(tempString));
+	ConcatCStrToCStr(" HTTP/1.0\r\n\r\n",tempString,sizeof(tempString));
+
+	
+	errCode = SSL_write(ssl,tempString,CStrLength(tempString));
+	
+	if (errCode < 0)
+	{
+		SetErrorMessageAndLongIntAndBail("OpenSSL: Error writing data via ssl, SSL_write() = ",errCode);
+	}
+	
+
+	for (;;)
+	{
+	char	tempString[256];
+	int		bytesRead;
+		
+
+		//	Read some bytes and dump them to the console
+		
+		bytesRead = SSL_read(ssl,tempString,sizeof(tempString) - 1);
+		
+		if (bytesRead == 0 && MacSocket_RemoteEndIsClosing(theSocket))
+		{
+			break;
+		}
+		
+		else if (bytesRead < 0)
+		{
+			SetErrorMessageAndLongIntAndBail("OpenSSL: Error reading data via ssl, SSL_read() = ",bytesRead);
+		}
+		
+		
+		tempString[bytesRead] = '\0';
+		
+		printf("%s", tempString);
+	}
+	
+	printf("\n\n\n");
+	
+	//	All done!
+	
+	errCode = noErr;
+	
+	
+EXITPOINT:
+
+	//	Clean up and go home
+	
+	if (theSocket >= 0)
+	{
+		MacSocket_close(theSocket);
+	}
+	
+	if (ssl != nil)
+	{
+		SSL_free(ssl);
+	}
+	
+	if (ssl_ctx != nil)
+	{
+		SSL_CTX_free(ssl_ctx);
+	}
+	
+	
+	if (errCode != noErr)
+	{
+		printf("An error occurred:\n");
+		
+		printf("%s",GetErrorMessage());
+	}
+	
+	
+	MacSocket_Shutdown();
+}

MacOS/GetHTTPS.src/MacSocket.h

@@ -0,0 +1,103 @@
+#pragma once
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+
+enum
+{
+	kMacSocket_TimeoutErr = -2
+};
+
+
+//	Since MacSocket does busy waiting, I do a callback while waiting
+
+typedef OSErr (*MacSocket_IdleWaitCallback)(void *);
+
+
+//	Call this before anything else!
+
+OSErr MacSocket_Startup(void);
+
+
+//	Call this to cleanup before quitting
+
+OSErr MacSocket_Shutdown(void);
+
+
+//	Call this to allocate a "socket" (reference number is returned in outSocketNum)
+//	Note that inDoThreadSwitching is pretty much irrelevant right now, since I ignore it
+//	The inTimeoutTicks parameter is applied during reads/writes of data
+//	The inIdleWaitCallback parameter specifies a callback which is called during busy-waiting periods
+//	The inUserRefPtr parameter is passed back to the idle-wait callback
+
+OSErr MacSocket_socket(int *outSocketNum,const Boolean inDoThreadSwitching,const long inTimeoutTicks,MacSocket_IdleWaitCallback inIdleWaitCallback,void *inUserRefPtr);
+
+
+//	Call this to connect to an IP/DNS address
+//	Note that inTargetAddressAndPort is in "IP:port" format-- e.g. 10.1.1.1:123
+
+OSErr MacSocket_connect(const int inSocketNum,char *inTargetAddressAndPort);
+
+
+//	Call this to listen on a port
+//	Since this a low-performance implementation, I allow a maximum of 1 (one!) incoming request when I listen
+
+OSErr MacSocket_listen(const int inSocketNum,const int inPortNum);
+
+
+//	Call this to close a socket
+
+OSErr MacSocket_close(const int inSocketNum);
+
+
+//	Call this to receive data on a socket
+//	Most parameters' purpose are obvious-- except maybe "inBlock" which controls whether I wait for data or return immediately
+
+int MacSocket_recv(const int inSocketNum,void *outBuff,int outBuffLength,const Boolean inBlock);
+
+
+//	Call this to send data on a socket
+
+int MacSocket_send(const int inSocketNum,const void *inBuff,int inBuffLength);
+
+
+//	If zero bytes were read in a call to MacSocket_recv(), it may be that the remote end has done a half-close
+//	This function will let you check whether that's true or not
+
+Boolean MacSocket_RemoteEndIsClosing(const int inSocketNum);
+
+
+//	Call this to see if the listen has completed after a call to MacSocket_listen()
+
+Boolean MacSocket_ListenCompleted(const int inSocketNum);
+
+
+//	These really aren't very useful anymore
+
+Boolean MacSocket_LocalEndIsOpen(const int inSocketNum);
+Boolean MacSocket_RemoteEndIsOpen(const int inSocketNum);
+
+
+//	You may wish to change the userRefPtr for a socket callback-- use this to do it
+
+void MacSocket_SetUserRefPtr(const int inSocketNum,void *inNewRefPtr);
+
+
+//	Call these to get the socket's IP:port descriptor
+
+void MacSocket_GetLocalIPAndPort(const int inSocketNum,char *outIPAndPort,const int inIPAndPortLength);
+void MacSocket_GetRemoteIPAndPort(const int inSocketNum,char *outIPAndPort,const int inIPAndPortLength);
+
+
+//	Call this to get error info from a socket
+
+void MacSocket_GetSocketErrorInfo(const int inSocketNum,int *outSocketErrCode,char *outSocketErrString,const int inSocketErrStringMaxLength);
+
+
+#ifdef __cplusplus
+}
+#endif

MacOS/Randomizer.cpp

@@ -0,0 +1,476 @@
+/* 
+------- Strong random data generation on a Macintosh (pre - OS X) ------
+		
+--	GENERAL: We aim to generate unpredictable bits without explicit
+	user interaction. A general review of the problem may be found
+	in RFC 1750, "Randomness Recommendations for Security", and some
+	more discussion, of general and Mac-specific issues has appeared
+	in "Using and Creating Cryptographic- Quality Random Numbers" by
+	Jon Callas (www.merrymeet.com/jon/usingrandom.html).
+
+	The data and entropy estimates provided below are based on my
+	limited experimentation and estimates, rather than by any
+	rigorous study, and the entropy estimates tend to be optimistic.
+	They should not be considered absolute.
+
+	Some of the information being collected may be correlated in
+	subtle ways. That includes mouse positions, timings, and disk
+	size measurements. Some obvious correlations will be eliminated
+	by the programmer, but other, weaker ones may remain. The
+	reliability of the code depends on such correlations being
+	poorly understood, both by us and by potential interceptors.
+
+	This package has been planned to be used with OpenSSL, v. 0.9.5.
+	It requires the OpenSSL function RAND_add. 
+
+--	OTHER WORK: Some source code and other details have been
+	published elsewhere, but I haven't found any to be satisfactory
+	for the Mac per se:
+
+	* The Linux random number generator (by Theodore Ts'o, in
+	  drivers/char/random.c), is a carefully designed open-source
+	  crypto random number package. It collects data from a variety
+	  of sources, including mouse, keyboard and other interrupts.
+	  One nice feature is that it explicitly estimates the entropy
+	  of the data it collects. Some of its features (e.g. interrupt
+	  timing) cannot be reliably exported to the Mac without using
+	  undocumented APIs.
+
+	* Truerand by Don P. Mitchell and Matt Blaze uses variations
+	  between different timing mechanisms on the same system. This
+	  has not been tested on the Mac, but requires preemptive
+	  multitasking, and is hardware-dependent, and can't be relied
+	  on to work well if only one oscillator is present.
+
+	* Cryptlib's RNG for the Mac (RNDMAC.C by Peter Gutmann),
+	  gathers a lot of information about the machine and system
+	  environment. Unfortunately, much of it is constant from one
+	  startup to the next. In other words, the random seed could be
+	  the same from one day to the next. Some of the APIs are
+	  hardware-dependent, and not all are compatible with Carbon (OS
+	  X). Incidentally, the EGD library is based on the UNIX entropy
+	  gathering methods in cryptlib, and isn't suitable for MacOS
+	  either.
+
+	* Mozilla (and perhaps earlier versions of Netscape) uses the
+	  time of day (in seconds) and an uninitialized local variable
+	  to seed the random number generator. The time of day is known
+	  to an outside interceptor (to within the accuracy of the
+	  system clock). The uninitialized variable could easily be
+	  identical between subsequent launches of an application, if it
+	  is reached through the same path.
+
+	* OpenSSL provides the function RAND_screen(), by G. van
+	  Oosten, which hashes the contents of the screen to generate a
+	  seed. This is not useful for an extension or for an
+	  application which launches at startup time, since the screen
+	  is likely to look identical from one launch to the next. This
+	  method is also rather slow.
+
+	* Using variations in disk drive seek times has been proposed
+	  (Davis, Ihaka and Fenstermacher, world.std.com/~dtd/;
+	  Jakobsson, Shriver, Hillyer and Juels,
+	  www.bell-labs.com/user/shriver/random.html). These variations
+	  appear to be due to air turbulence inside the disk drive
+	  mechanism, and are very strongly unpredictable. Unfortunately
+	  this technique is slow, and some implementations of it may be
+	  patented (see Shriver's page above.) It of course cannot be
+	  used with a RAM disk.
+
+--	TIMING: On the 601 PowerPC the time base register is guaranteed
+	to change at least once every 10 addi instructions, i.e. 10
+	cycles. On a 60 MHz machine (slowest PowerPC) this translates to
+	a resolution of 1/6 usec. Newer machines seem to be using a 10
+	cycle resolution as well.
+	
+	For 68K Macs, the Microseconds() call may be used. See Develop
+	issue 29 on the Apple developer site
+	(developer.apple.com/dev/techsupport/develop/issue29/minow.html)
+	for information on its accuracy and resolution. The code below
+	has been tested only on PowerPC based machines.
+
+	The time from machine startup to the launch of an application in
+	the startup folder has a variance of about 1.6 msec on a new G4
+	machine with a defragmented and optimized disk, most extensions
+	off and no icons on the desktop. This can be reasonably taken as
+	a lower bound on the variance. Most of this variation is likely
+	due to disk seek time variability. The distribution of startup
+	times is probably not entirely even or uncorrelated. This needs
+	to be investigated, but I am guessing that it not a majpor
+	problem. Entropy = log2 (1600/0.166) ~= 13 bits on a 60 MHz
+	machine, ~16 bits for a 450 MHz machine.
+
+	User-launched application startup times will have a variance of
+	a second or more relative to machine startup time. Entropy >~22
+	bits.
+
+	Machine startup time is available with a 1-second resolution. It
+	is predictable to no better a minute or two, in the case of
+	people who show up punctually to work at the same time and
+	immediately start their computer. Using the scheduled startup
+	feature (when available) will cause the machine to start up at
+	the same time every day, making the value predictable. Entropy
+	>~7 bits, or 0 bits with scheduled startup.
+
+	The time of day is of course known to an outsider and thus has 0
+	entropy if the system clock is regularly calibrated.
+
+--	KEY TIMING: A  very fast typist (120 wpm) will have a typical
+	inter-key timing interval of 100 msec. We can assume a variance
+	of no less than 2 msec -- maybe. Do good typists have a constant
+	rhythm, like drummers? Since what we measure is not the
+	key-generated interrupt but the time at which the key event was
+	taken off the event queue, our resolution is roughly the time
+	between process switches, at best 1 tick (17 msec). I  therefore
+	consider this technique questionable and not very useful for
+	obtaining high entropy data on the Mac.
+
+--	MOUSE POSITION AND TIMING: The high bits of the mouse position
+	are far from arbitrary, since the mouse tends to stay in a few
+	limited areas of the screen. I am guessing that the position of
+	the mouse is arbitrary within a 6 pixel square. Since the mouse
+	stays still for long periods of time, it should be sampled only
+	after it was moved, to avoid correlated data. This gives an
+	entropy of log2(6*6) ~= 5 bits per measurement.
+
+	The time during which the mouse stays still can vary from zero
+	to, say, 5 seconds (occasionally longer). If the still time is
+	measured by sampling the mouse during null events, and null
+	events are received once per tick, its resolution is 1/60th of a
+	second, giving an entropy of log2 (60*5) ~= 8 bits per
+	measurement. Since the distribution of still times is uneven,
+	this estimate is on the high side.
+
+	For simplicity and compatibility across system versions, the
+	mouse is to be sampled explicitly (e.g. in the event loop),
+	rather than in a time manager task.
+
+--	STARTUP DISK TOTAL FILE SIZE: Varies typically by at least 20k
+	from one startup to the next, with 'minimal' computer use. Won't
+	vary at all if machine is started again immediately after
+	startup (unless virtual memory is on), but any application which
+	uses the web and caches information to disk is likely to cause
+	this much variation or more. The variation is probably not
+	random, but I don't know in what way. File sizes tend to be
+	divisible by 4 bytes since file format fields are often
+	long-aligned. Entropy > log2 (20000/4) ~= 12 bits.
+	
+--	STARTUP DISK FIRST AVAILABLE ALLOCATION BLOCK: As the volume
+	gets fragmented this could be anywhere in principle. In a
+	perfectly unfragmented volume this will be strongly correlated
+	with the total file size on the disk. With more fragmentation
+	comes less certainty. I took the variation in this value to be
+	1/8 of the total file size on the volume.
+
+--	SYSTEM REQUIREMENTS: The code here requires System 7.0 and above
+	(for Gestalt and Microseconds calls). All the calls used are
+	Carbon-compatible.
+*/
+
+/*------------------------------ Includes ----------------------------*/
+
+#include "Randomizer.h"
+
+// Mac OS API
+#include <Files.h>
+#include <Folders.h>
+#include <Events.h>
+#include <Processes.h>
+#include <Gestalt.h>
+#include <Resources.h>
+#include <LowMem.h>
+
+// Standard C library
+#include <stdlib.h>
+#include <math.h>
+
+/*---------------------- Function declarations -----------------------*/
+
+// declared in OpenSSL/crypto/rand/rand.h
+extern "C" void RAND_add (const void *buf, int num, double entropy);
+
+unsigned long GetPPCTimer (bool is601);	// Make it global if needed
+					// elsewhere
+
+/*---------------------------- Constants -----------------------------*/
+
+#define kMouseResolution 6		// Mouse position has to differ
+					// from the last one by this
+					// much to be entered
+#define kMousePositionEntropy 5.16	// log2 (kMouseResolution**2)
+#define kTypicalMouseIdleTicks 300.0	// I am guessing that a typical
+					// amount of time between mouse
+					// moves is 5 seconds
+#define kVolumeBytesEntropy 12.0	// about log2 (20000/4),
+					// assuming a variation of 20K
+					// in total file size and
+					// long-aligned file formats.
+#define kApplicationUpTimeEntropy 6.0	// Variance > 1 second, uptime
+					// in ticks  
+#define kSysStartupEntropy 7.0		// Entropy for machine startup
+					// time
+
+
+/*------------------------ Function definitions ----------------------*/
+
+CRandomizer::CRandomizer (void)
+{
+	long	result;
+	
+	mSupportsLargeVolumes =
+		(Gestalt(gestaltFSAttr, &result) == noErr) &&
+		((result & (1L << gestaltFSSupports2TBVols)) != 0);
+	
+	if (Gestalt (gestaltNativeCPUtype, &result) != noErr)
+	{
+		mIsPowerPC = false;
+		mIs601 = false;
+	}
+	else
+	{
+		mIs601 = (result == gestaltCPU601);
+		mIsPowerPC = (result >= gestaltCPU601);
+	}
+	mLastMouse.h = mLastMouse.v = -10;	// First mouse will
+						// always be recorded
+	mLastPeriodicTicks = TickCount();
+	GetTimeBaseResolution ();
+	
+	// Add initial entropy
+	AddTimeSinceMachineStartup ();
+	AddAbsoluteSystemStartupTime ();
+	AddStartupVolumeInfo ();
+	AddFiller ();
+}
+
+void CRandomizer::PeriodicAction (void)
+{
+	AddCurrentMouse ();
+	AddNow (0.0);	// Should have a better entropy estimate here
+	mLastPeriodicTicks = TickCount();
+}
+
+/*------------------------- Private Methods --------------------------*/
+
+void CRandomizer::AddCurrentMouse (void)
+{
+	Point mouseLoc;
+	unsigned long lastCheck;	// Ticks since mouse was last
+					// sampled
+
+#if TARGET_API_MAC_CARBON
+	GetGlobalMouse (&mouseLoc);
+#else
+	mouseLoc = LMGetMouseLocation();
+#endif
+	
+	if (labs (mLastMouse.h - mouseLoc.h) > kMouseResolution/2 &&
+	    labs (mLastMouse.v - mouseLoc.v) > kMouseResolution/2)
+		AddBytes (&mouseLoc, sizeof (mouseLoc),
+				kMousePositionEntropy);
+	
+	if (mLastMouse.h == mouseLoc.h && mLastMouse.v == mouseLoc.v)
+		mMouseStill ++;
+	else
+	{
+		double entropy;
+		
+		// Mouse has moved. Add the number of measurements for
+		// which it's been still. If the resolution is too
+		// coarse, assume the entropy is 0.
+
+		lastCheck = TickCount() - mLastPeriodicTicks;
+		if (lastCheck <= 0)
+			lastCheck = 1;
+		entropy = log2l
+			(kTypicalMouseIdleTicks/(double)lastCheck);
+		if (entropy < 0.0)
+			entropy = 0.0;
+		AddBytes (&mMouseStill, sizeof (mMouseStill), entropy);
+		mMouseStill = 0;
+	}
+	mLastMouse = mouseLoc;
+}
+
+void CRandomizer::AddAbsoluteSystemStartupTime (void)
+{
+	unsigned long	now;		// Time in seconds since
+					// 1/1/1904
+	GetDateTime (&now);
+	now -= TickCount() / 60;	// Time in ticks since machine
+					// startup
+	AddBytes (&now, sizeof (now), kSysStartupEntropy);
+}
+
+void CRandomizer::AddTimeSinceMachineStartup (void)
+{
+	AddNow (1.5);			// Uncertainty in app startup
+					// time is > 1.5 msec (for
+					// automated app startup).
+}
+
+void CRandomizer::AddAppRunningTime (void)
+{
+	ProcessSerialNumber PSN;
+	ProcessInfoRec		ProcessInfo;
+	
+	ProcessInfo.processInfoLength = sizeof (ProcessInfoRec);
+	ProcessInfo.processName = nil;
+	ProcessInfo.processAppSpec = nil;
+	
+	GetCurrentProcess (&PSN);
+	GetProcessInformation (&PSN, &ProcessInfo);
+
+	// Now add the amount of time in ticks that the current process
+	// has been active
+
+	AddBytes (&ProcessInfo, sizeof (ProcessInfoRec),
+			kApplicationUpTimeEntropy);
+}
+
+void CRandomizer::AddStartupVolumeInfo (void)
+{
+	short			vRefNum;
+	long			dirID;
+	XVolumeParam	pb;
+	OSErr			err;
+	
+	if (!mSupportsLargeVolumes)
+		return;
+		
+	FindFolder (kOnSystemDisk, kSystemFolderType, kDontCreateFolder,
+			&vRefNum, &dirID);
+	pb.ioVRefNum = vRefNum;
+	pb.ioCompletion = 0;
+	pb.ioNamePtr = 0;
+	pb.ioVolIndex = 0;
+	err = PBXGetVolInfoSync (&pb);
+	if (err != noErr)
+		return;
+		
+	// Base the entropy on the amount of space used on the disk and
+	// on the next available allocation block. A lot else might be
+	// unpredictable, so might as well toss the whole block in. See
+	// comments for entropy estimate justifications.
+
+	AddBytes (&pb, sizeof (pb),
+		kVolumeBytesEntropy +
+		log2l (((pb.ioVTotalBytes.hi - pb.ioVFreeBytes.hi)
+				* 4294967296.0D +
+			(pb.ioVTotalBytes.lo - pb.ioVFreeBytes.lo))
+				/ pb.ioVAlBlkSiz - 3.0));
+}
+
+/*
+	On a typical startup CRandomizer will come up with about 60
+	bits of good, unpredictable data. Assuming no more input will
+	be available, we'll need some more lower-quality data to give
+	OpenSSL the 128 bits of entropy it desires. AddFiller adds some
+	relatively predictable data into the soup.
+*/
+
+void CRandomizer::AddFiller (void)
+{
+	struct
+	{
+		ProcessSerialNumber psn;	// Front process serial
+						// number
+		RGBColor	hiliteRGBValue;	// User-selected
+						// highlight color
+		long		processCount;	// Number of active
+						// processes
+		long		cpuSpeed;	// Processor speed
+		long		totalMemory;	// Total logical memory
+						// (incl. virtual one)
+		long		systemVersion;	// OS version
+		short		resFile;	// Current resource file
+	} data;
+	
+	GetNextProcess ((ProcessSerialNumber*) kNoProcess);
+	while (GetNextProcess (&data.psn) == noErr)
+		data.processCount++;
+	GetFrontProcess (&data.psn);
+	LMGetHiliteRGB (&data.hiliteRGBValue);
+	Gestalt (gestaltProcClkSpeed, &data.cpuSpeed);
+	Gestalt (gestaltLogicalRAMSize, &data.totalMemory);
+	Gestalt (gestaltSystemVersion, &data.systemVersion);
+	data.resFile = CurResFile ();
+	
+	// Here we pretend to feed the PRNG completely random data. This
+	// is of course false, as much of the above data is predictable
+	// by an outsider. At this point we don't have any more
+	// randomness to add, but with OpenSSL we must have a 128 bit
+	// seed before we can start. We just add what we can, without a
+	// real entropy estimate, and hope for the best.
+
+	AddBytes (&data, sizeof(data), 8.0 * sizeof(data));
+	AddCurrentMouse ();
+	AddNow (1.0);
+}
+
+//-------------------  LOW LEVEL ---------------------
+
+void CRandomizer::AddBytes (void *data, long size, double entropy)
+{
+	RAND_add (data, size, entropy * 0.125);	// Convert entropy bits
+						// to bytes
+}
+
+void CRandomizer::AddNow (double millisecondUncertainty)
+{
+	long time = SysTimer();
+	AddBytes (&time, sizeof (time), log2l (millisecondUncertainty *
+			mTimebaseTicksPerMillisec));
+}
+
+//----------------- TIMING SUPPORT ------------------
+
+void CRandomizer::GetTimeBaseResolution (void)
+{	
+#ifdef __powerc
+	long speed;
+	
+	// gestaltProcClkSpeed available on System 7.5.2 and above
+	if (Gestalt (gestaltProcClkSpeed, &speed) != noErr)
+		// Only PowerPCs running pre-7.5.2 are 60-80 MHz
+		// machines.
+		mTimebaseTicksPerMillisec =  6000.0D;
+	// Assume 10 cycles per clock update, as in 601 spec. Seems true
+	// for later chips as well.
+	mTimebaseTicksPerMillisec = speed / 1.0e4D;
+#else
+	// 68K VIA-based machines (see Develop Magazine no. 29)
+	mTimebaseTicksPerMillisec = 783.360D;
+#endif
+}
+
+unsigned long CRandomizer::SysTimer (void)	// returns the lower 32
+						// bit of the chip timer
+{
+#ifdef __powerc
+	return GetPPCTimer (mIs601);
+#else
+	UnsignedWide usec;
+	Microseconds (&usec);
+	return usec.lo;
+#endif
+}
+
+#ifdef __powerc
+// The timebase is available through mfspr on 601, mftb on later chips.
+// Motorola recommends that an 601 implementation map mftb to mfspr
+// through an exception, but I haven't tested to see if MacOS actually
+// does this. We only sample the lower 32 bits of the timer (i.e. a
+// few minutes of resolution)
+
+asm unsigned long GetPPCTimer (register bool is601)
+{
+	cmplwi	is601, 0	// Check if 601
+	bne	_601		// if non-zero goto _601
+	mftb  	r3		// Available on 603 and later.
+	blr			// return with result in r3
+_601:
+	mfspr r3, spr5  	// Available on 601 only.
+				// blr inserted automatically
+}
+#endif

MacOS/Randomizer.h

@@ -0,0 +1,43 @@
+
+//	Gathers unpredictable system data to be used for generating
+//	random bits
+
+#include <MacTypes.h>
+
+class CRandomizer
+{
+public:
+	CRandomizer (void);
+	void PeriodicAction (void);
+	
+private:
+
+	// Private calls
+
+	void		AddTimeSinceMachineStartup (void);
+	void		AddAbsoluteSystemStartupTime (void);
+	void		AddAppRunningTime (void);
+	void		AddStartupVolumeInfo (void);
+	void		AddFiller (void);
+
+	void		AddCurrentMouse (void);
+	void		AddNow (double millisecondUncertainty);
+	void		AddBytes (void *data, long size, double entropy);
+	
+	void		GetTimeBaseResolution (void);
+	unsigned long	SysTimer (void);
+
+	// System Info	
+	bool		mSupportsLargeVolumes;
+	bool		mIsPowerPC;
+	bool		mIs601;
+	
+	// Time info
+	double		mTimebaseTicksPerMillisec;
+	unsigned long	mLastPeriodicTicks;
+	
+	// Mouse info
+	long		mSamplePeriod;
+	Point		mLastMouse;
+	long		mMouseStill;
+};

MacOS/TODO

@@ -0,0 +1,18 @@
+-------------------------------------------------------------------
+Verify server certificate
+-------------------------------------------------------------------
+Currently omitted from the project:
+
+	crypto/tmdiff.c
+	crypto/bio/bss_conn.c
+	crypto/bio/b_sock.c
+	crypto/bio/bss_acpt.c
+	crypto/bio/bss_log.h
+
+-------------------------------------------------------------------
+Build libraries to link with...
+-------------------------------------------------------------------
+Port openssl application.
+-------------------------------------------------------------------
+BN optimizations (currently PPC version is compiled with BN_LLONG)
+-------------------------------------------------------------------

MacOS/_MWERKS_GUSI_prefix.h

@@ -0,0 +1,9 @@
+#include <MacHeaders.h>
+#define B_ENDIAN
+#ifdef __POWERPC__
+#pragma longlong on
+#endif
+#if 1
+#define MAC_OS_GUSI_SOURCE
+#endif
+#define MONOLITH

MacOS/_MWERKS_prefix.h

@@ -0,0 +1,9 @@
+#include <MacHeaders.h>
+#define B_ENDIAN
+#ifdef __POWERPC__
+#pragma longlong on
+#endif
+#if 0
+#define MAC_OS_GUSI_SOURCE
+#endif
+#define MONOLITH

MacOS/buildinf.h

@@ -0,0 +1,5 @@
+#ifndef MK1MF_BUILD
+#  define CFLAGS	"-DB_ENDIAN"
+#  define PLATFORM	"macos"
+#  define DATE		"Sun Feb 27 19:44:16 MET 2000"
+#endif

MacOS/mklinks.as.hqx

@@ -0,0 +1,820 @@
+(This file must be converted with BinHex 4.0)
+
+:#QeVE'PZDh-ZBA-!39"36'&`E(3J!!!!!!!!!*LiI6m!!!!!!3!!!*G#!!#@3J!
+!!AChFQPd!!!!K3)"!3m(Fh9`F'pbG!!!!)B#!3%$"(0eFQ8!!!#(!J-%"!3("3C
+cGfPdBfJ!!!#)!J%"#39cH@jMD!!!!)N#"J%$!`-&"3-'FhPcG'9Y!!!!LJ)&"3)
+%!J8("!-#!`4dB@*X!!!!L`))!3-$!`-$!`-$"(4PE'`!!!#-!J)"#38$G'KP!!!
+!M3))(J)@!Ki#!J))!K)#!`)B!Kd%G'KPE3!!!)i#!J%&#`4dD'9j!!!!M`)#!J)
+#$3TdD(*[G@GSEh9d!!!!N!!#!3%&"(4TCQB!!!#4!J%"!`4dD@eP!!!!NJ)"!JS
+#!h4T!!!!'N!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!H!!!!!!!#!!!!!!
+!!!!!!!!!!!!!rrrrr`!!!$3!!!!N!!!!!#"[!!5JAb"[!!5K++!M6R9$9'mJFR9
+Z)(4SDA-JFf0bDA"d)'&`F'aTBf&dD@pZ,#"jEh8JEA9cG#"QDA*cG#"TER0dB@a
+X)%&`F'aP8f0bDA"d,J!!!)C8D'Pc)(0MFQP`G#"MFQ9KG'9c)#iZ,fPZBfaeC'8
+[Eh"PER0cE#"KEQ3JCQPXE(-JDA3JGfPdD#"ZC@0PFh0KFRNJB@aTBA0PFbi0$8P
+d)'eTCfKd)(4KDf8JB5"hD'PXC5"dEb"MEfe`E'9dC5"cEb"`E'9KFf8JBQ8JF'&
+dD@9ZG$SY+3!!!#S!!J!!!!!!$3!+!"!!!!!-!!!!!!!!!!!!63!0!!S!%!%!!!`
+!!!!!!!!!!!!B!!!!+!!!!!!!!!!)!!!!)!#N2c`!!DR`!!!!l!!!!!&19[ri,`0
+f!#m$-$bKVDG'*KmY52ri,`-`2+LITdBQ(b!ZrrLa`'FJ,`-J2'0`ER4"l[rm)NL
+KV5+)*Kp+3'B)5Ulrr'F#GJ%3!bBZrr41ANje6PB!!#m-@Bm[2%j29%Nr2!#!U"m
+SAb!-CJK`!cm!UFKJ+#m-UC)J9#!)d+J!'#&!!"JJ9#!)d+J!(#&!!"a9Mbm8)&q
+JAMk!9%mSE[rm6Pj1G8j@!!![$%kkre4+!'FU@Bm[2'&`E(3[2(0MF(4`)DJU+&m
+J$'F5@Bm[$#mm!!!!!A!!U#UTp&K26VVrG#KZrra1ANje!!!!('&`E(3!!!!"4P*
+&4J!!!!!!J%P$6L-!!!!!!*B!!!!"!!!!!!G"8&"-!!!!!!!"!!!"!!!!!S!!!!4
+!!!"i)!!!K"!!!3))!!)#"!!%"!)!#!J"!"!8!)!J)J"!3%%!)2#!J"#*!%!)KJ!
+J")3!)!*!!"!")!!3!K!!%!3)!"!)"!!J%!)!3#!"!)"!!S%!J!5#!3!)4!)!#%J
+%!!KB#!!%C"!!!m)J!!!"3!!!!)!!!!%!!!!$J!!!"m!!!(rJ!!$rm!!"rrJ!!rr
+m!!IrrJ!2rrm!(rrrJ$rrrm"rrrrJrrrrm2rrrrMrrrrmrrrrrRrrrrmrrrrq(rr
+rr!rrrrJ(rrr`!rrri!(rrm!$rrq!"rrr!!rrrJ!2rr`!$rri!!IRm!!$`q!!!!(
+!!!!!J!!!!!)!!!!!!!!!!!m!!!!!!!!!!!!!!!!!!!$`m!!!!!!!!!!!!!!!!!!
+2!!m!!!!!!!!!!!!!!!rrm!!!m!!!!!!!!!!!!!$`c0m!!!m!!!!!!!!!!!!2!!c
+-m!!!m!!!!!!!!!!!m!$-cI!!!!m!!!!!!!!!$`!-c0m!!!!!m!!!!!!!!2!!c-h
+`!!!!!!m!!!!!!!m!$-cIh`!!!!!!m!!!!!$`!-c0rGh`!!!!!!m!!!!2!!c-hph
+-h`!!!!!!m!!!rrr-cIhF`-h`!!!!!!m!!2lFr0rGc!`-h`!!!!!!m!$pc-rph-$
+!`-h`!!!!!!m!r-`2cF`-$!!-r3!!!!!!m!m!`-c!`-!!$0m!!!!!$-m!m!`-$!`
+!!-cI!!!!!-c`!!m!`-$!!!`-h`!!!!c2!!!!m!`-!!$!c0m!!!$-m!!!!!m!`!!
+-$-hm!!!-c`!!!!!!m!!!`-cIc!!!c2!!!!!!!!m!$!c0r-`!$-m!!!!!!!$pm-$
+-hmc!!-c`!!!!!!!2hI`-cIc-!!c2!!!!!!!!rGc2c0r-`!$-m!!!!!!!!2h-cmh
+mc!!-c`!!!!!!!!$mc!rIr-!!c2!!!!!!!!!!$m$2m!r-$-m!!!!!!!!!!!$rr`!
+!r-c`!!!!!!!!!!!!!!!!!!r2!!!!!!!!!!!!!!!!!!!!m!!!!!!!!!!!!!"!!B!
+13"%J)4"##18%Q)+3!%&!)5!L%%3BL#83*L!G3!#!!B!2`"rJ2r"rq2rmrrlrrhr
+r2riIr"ri2r!ri"h!!)!!!!#!!!!!$r!!!!!!!2r`$`!!!!!2$!m!m!!!!2$!c`!
+2!!!2$!c`!!$`!2r`cpm!!!m!rGrpc2!!!2$p$p`-c`!!$`m!`-$0m!$2!2!-$-h
+`$2!!$`$-hm$2!!!2m-hm$2!!!2h2hm$2!!!!r-rm$2!!!!!2r`r2!!!!!!!!!2!
+!!!!!!!#D8f0bDA"d)%&`F'aTBf&dD@pZ$3e8D'Pc)(0MFQP`G#"MFQ9KG'9c)#i
+Z,fPZBfaeC'8[Eh"PER0cE#"KEQ3JCQPXE(-JDA3JGfPdD#"ZC@0PFh0KFRNJB@a
+TBA0PFbi0$8Pd)'eTCfKd)(4KDf8JB5"hD'PXC5"dEb"MEfe`E'9dC5"cEb"`E'9
+KFf8JBQ8JF'&dD@9ZG$SY+3!!!")!!J!!!!!!!!!!!!%!"J!'%iN!!!!+@1!!!b!
+!!!-J!!!!!"3!+`!(!Cm#@!!V!!F"f!*B!!!!!3!!M`C'BA0N98&6)$%Z-6!a,M%
+`$J!!!!32rrm!!3!#!!-"rrm!!!d!!3!"D`!!!!!!!!!%!J!%!!)!"3!'$3!&!!*
+X!!)!!!U`!!IrrJd!"`!#6`!!!!!+X!!)!!N0!!J!!@X!!!!%#Um!#J)!#J!#!!X
+!$!d!#`!#E!!#!!3!"2rprr`"rrd!!!(rr!!!!J!-!!)!$3!1$3!0!!*X!!%!"!!
+%rrX!$`(rq`!!$!!2!&N!8b"(CA3JF'&dD#"dEb"dD'Pc)%&`F'aP8f0bDA"d)'&
+`F'aPG$XJGA0P)'Pd)(4[)'C[FQdJG'KP)("KG'JJG'mJG'KP)'PZBfaeC'8JCQp
+XC'9b!!)!!!)!$J!#!"!!%3d!%!!#E!!"!!3!"2rk!")"rrS!!!`!%J!Q!#!JB@j
+N)(4SC5"[G'KPFL"bC@aPGQ&ZG#"QEfaNCA*c,J!#!!!#!"%!!J!6!"30!"-!!R-
+!!!!%!"%!&3!@$3!9!!*M!!!!"!!1!"F!'!d!&`!#E!!&!!3!$!!CrrN0!"N!!Qi
+!!!!%!!`!'J!E$3!D!!)d!!!!"3!-rrJ!(!Vrq!!%#Q0[BQS0!"`!!Q`!"3!'!!X
+!(Irh$3!G!!0*!!)!"J!,rrB!([re#[rf!"JZC@&bFfCQC(*KE'Pc!!!!!!!!)!"
+KCQ4b$3!H!!"Q!!!!"J!(![re!!!"rrF!!!d!'`!"E3!!!!3!"3!I$`!I!6J)ER9
+XE!!!!!!!!Gq!rrm!!!!A"NCTEQ4PFJ!!(`*[Me!!ASfm!Qq,i!"HA[!!I&M!!!!
+!!!!!'mi!!JN#!Qq-1!!!Kb%#Ei`J!!!!!%C14&*038e"3e-!!"%!B@aTF`!!!!!
+!fJ!#!!!-6@&MD@jdEh0S)%K%!!!!!!!!!!!!!!!!!!!!XSA5h%*%!!!!!!!A"NC
+TEQ4PFJ!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+!!!!!!!!!!!!!!!!!!!!!3rLc#@a!4Nj%8Ne"3e2rrrrr!!!!!!!!!!!!!!!!!!!
+!!!!!!!e6HA0dC@dJ4QpXC'9b!!!"!!3!!!!A!!)!)8eKBfPZG'pcD#")4$T6HA0
+dC@dJ4QpXC'9b1NCTEQ4PFJ$rr`!!!Irj!!!0!"J!!@d!!!!-!!hrp!Vrp!!%#Q0
+dH(30!"B!!@m!!!!!!!$rm`[rm`!5-!!(G'KPF'&dD!!(G'KP8'&dD!)!&!!#!#!
+!)3d!)!!#E!!#!")!%[rbrr%"rr)!!!(rm3!!!J!K!!)!)J!M$3!L!!*b!!!!%J!
+A!#3!*3d!*!!#EJ!$!")!&3!Q!#F0!#B!!6%!!!!6!"Arm!Vrm!!%#R4iC'`0!#F
+!!6%!!!!5!"2rl`Vrl`!%#Q&cBh)0!#8!!@m!!!!!!!$rlJ[rlJ!F-!!-G'KPEfa
+NC'9XD@ec!!adD'92E'4%C@aTEA-#!#-!!J!S!#N0!#J!!R)!!!!B!"d!+J!V$3!
+U!!&Y!!!!'!!C!#`-!#`!"`!"1J!#!!!0!#X!!Qi!!`!!!!!!,3!Z$3!Y!!%a!!!
+!'J!Frqd+rqd!"!TdH'4X$3!Z!!%a!!!!'3!Drq`+rq`!"!TKFf0b!J!T!!)!,`!
+`$3![!!*X!!)!(J!Hrq[rkJ(rk`!!!IrU!!!#!$!!!J!a!$)0!$%!!R)!!!!H!#X
+!-`!d$3!c!!*X!!8!(J!T!$Ark3d!03!#EJ!!!"i!+3!f!$F0!$B!!cF"!!!I!#R
+rk!!i!$N+rqJ!"!TMDA4Y$3!i!!&Y!!!!)`!PrqF$rqF!!3d!13!"E3!!!#B!+2r
+Q!rrQrrd0!$F!!@m!!!!H!"rrj3[rj3!5-!!(G'KPF'&dD!!(G'KP8'&dD!(rk3!
+!$3!d!!&[!!!!!!!!rq3,rq3!)$!!$R4SCA"bEfTPBh4`BA4S!!jdD'93FQpUC@0
+d8'&dD!)!-J!#!$S!1`d!1J!#FJ!!!#`!1`!m!$d0!$`!!Q-!!!!X!$N!2J!r$3!
+q!!*X!!8!,!!h!%$ri`d!3!!#EJ!!!#`!0`""!%)0!%%!!cF"!!!Y!$IriJ"$!%3
++rq)!"!TMDA4Y$3"$!!&Y!!!!-3!crq%$rq%!!3d!4!!"E3!!!$3!0[rJ!rrJrri
+0!%)!!@m!!!!X!#hrh`[rh`!5-!!(G'KPF'&dD!!(G'KP8'&dD!(ri`!!$3!r!!&
+Y!!!!0`!irpi+rpi!"!T849K8$3!p!!&[!!!!!!!!rpd,rpd!&M!!#A4SC@ePF'&
+dD!!*G'KP6@93BA4S!J!l!!)!43"'$3"&!!*X!!)!2!!mrpcrf`(rh!!!!IrE!!!
+#!%B!!J"(!%J0!%F!!R)!!!!m!%8!53"+$3"*!!*M!!!!2!""!%X!6!d!5`!#BJ!
+!!$`!2`"0!%i0!%d!!@m!!!!m!$hrfJ[rfJ!J-!!1G'KPF(*[DQ9MG("KG'J!$R4
+SC9"bEfTPBh43BA4S$3"1!!&Y!!!!23!q!%m-!%m!$3!(D@jME(9NC3!#!!!0!%`
+!!@d!!!!r!%$rf3Vrf3!%#P4&@&30!%S!!@m!!!!!!!$rf![rf!!Q-!!4D@jME(9
+NC@C[E'4PFR"KG'J!%@PZBfaeC'9'EfaNCA*3BA4S!J")!!)!8!"4$3"3!!*b!!!
+!4J"9!&)!8`d!8J!#B`!!!%B!83"8!&80!&3!!Q)!!!"'!%m!9J"A$3"@!!*L!!!
+!4J",!&J!@3d!@!!"E`!!!%B!4rrA#rrA!#!`!!jdD'9`FQpUC@0dF'&dD!!1G'K
+P8(*[DQ9MG&"KG'J0!&N!!@d!!!"(!%S!@J`!@J!0!!GTEQ0XG@4P!!)!!!d!9`!
+"E3!!!%X!6J"E$!"E!!d!"fp`C@jcFf`!!J!!$3"9!!&Y!!!!6`"3rpB+rpB!"!T
+849K8$3"6!!&[!!!!!!!!rp8,rp8!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&
+dD!!BEh"PEP066%PZBfaeC'9'EfaNCA*3BA4S!J"4!!)!A!"G$3"F!!*b!!!!9J"
+K!&i!A`d!AJ!#B`!!!&B!A3"J!'%0!'!!!Q)!!!"@!&X!BJ"M$3"L!!&[!!!!9J"
+Arp3,rp3!)$!!$R4SCA"bEfTPBh4`BA4S!!jdD'93FQpUC@0d8'&dD!d!B`!"E3!
+!!&F!@J"N$!"N!!`!"Q0bHA"dE`!#!!!0!'%!!@d!!!"E!&crd`Vrd`!%#P4&@&3
+0!&m!!@m!!!!!!!$rdJ[rdJ!N-!!3Bh*jF(4[CQpXC'9bF'&dD!!3Bh*jF(4[4Qp
+XC'9b8'&dD!)!A3!#!'8!CJd!C3!#FJ!!!')!E3"R!'J0!'F!!Q-!!!"L!'N!D3"
+U$3"T!!*L!!!!BJ"R!'X!E!d!D`!"E`!!!')!Brr4#rr4!#!`!!jdD'9`FQpUC@0
+dF'&dD!!1G'KP8(*[DQ9MG&"KG'J0!'`!!@d!!!"M!'B!E3`!E3!*!!0cFf`!!J!
+!$3"U!!&Y!!!!C`"Srp!+rp!!"!T849K8$3"S!!&[!!!!!!!!rmm,rmm!(M!!$A0
+cE'C[E'4PFR"KG'J!$A0cE%C[E'4PFP"KG'J#!'B!!J"Z!'m0!'i!!R)!!!"Z!(8
+!F!"a$3"`!!*M!!!!EJ"a!()!F`d!FJ!"E`!!!'i!Err1#rr1!#!`!!jdD'9`FQp
+UC@0dF'&dD!!1G'KP8(*[DQ9MG&"KG'J0!(-!!@d!!!"[!($rc3Vrc3!%#P4&@&3
+0!(%!!@m!!!!!!!$rc![rc!!Q-!!4Eh"PER0cE'C[E'4PFR"KG'J!%@p`C@jcFfa
+'EfaNCA*3BA4S!J"[!!)!G!"e$3"d!!*X!!)!GJ"frm[rbJ(rb`!!!Ir+!!!#!(8
+!!J"f!(F0!(B!!R)!!!"f!(X!H!"j$3"i!!&[!!!!GJ"hrmN,rmN!($!!$(4SC@p
+XC'4PE'PYF`!-G'KP6faN4'9XD@ec$3"j!!*Z!!-!!!!!!(S!H`d!HJ!"-3!!!(J
+!H[r)#[r)!!3+G(KNE!d!H`!"-3!!!(F!H2r(#[r(!!3+BA0MFJ)!G`!#!(`!I3d
+!I!!#E!!#!(`!I2r'rm8"rmB!!!(ra3!!!J"p!!)!IJ"r$3"q!!*X!!%!I!"mrm3
+!J!(ra!!!$!#!!%!!1L"NC@aPG'8JEfaN)'PZBfaeC'8kEh"PER0cE#"QEfaNCA)
+JB@jN)(*PBh*PBA4P)'Pd)'0XC@&ZE(N!!J!!!J"r!!)!J3##$3#"!!*X!!)!I!"
+mrm2r`J(r``!!!Ir#!!!#!))!!J#$!)30!)-!!e%!!!"m!+8!K3#'!)F0!)8!!@X
+!!!"r!*`!L!)!L!!#!)N!LJd!L3!$53!#!(m!N[r"!)[r`!Vr`3!B,QeTFf0cE'0
+d+LSU+J!!!!!!!*!!!#SU+LS0!)X!!Qi!!!"r!)i!M!#0$3#-!!)d!!!!K`#1rlm
+!MJVr[`!%#Q0QEf`0!)i!!@d!!!#+!)d!M``!M`!0!!G[F'9ZFh0X!!)!!!d!M3!
+#0!!!!(m!Krqq!*!!#[qq!!3+BfC[E!d!N!!!!@m!!!#$!)Er[3[r[3!Q-!!4D@j
+ME(9NC@C[E'4PFR"KG'J!%@PZBfaeC'9'EfaNCA*3BA4S![r!!!!#!)S!!J#4rl`
+0!*%!!dN!!J#6!*crZ`#5rlS+rlX!'#jMEh*PC'9XEbSU+LS!!!!!!!#3!!!U+LS
+U$3#5!!%a!!!!N`#BrlN+rlN!"!TcC@aP![qk!!!#rl`!!!d!KJ!$8J!!!!!!!2q
+irlIrYJVrZ!!B,Q&cBh*PFR)J+LSU+J!!!!!!!*!!!#SU+LS"rlF!!!,rYJ!!$3#
+(!!*X!!%!T!#Nrl8!N`(rY3!!$!#6!"-!$5"TCfj[FQ8JCA*bEh)!!J!!!J#%!!)
+!P!#9$3#8!!*X!!)!TJ#Qrl6rX`(rY!!!!Iqc!!!#!*8!!J#@!*F0!*B!!dN!!J#
+Q!,lrX[qa!*J+rl)!'#jMEh*PBh*PE#SU+LS!!!!!!!#3!!"ZG@aX!Iqa!!!'!*J
+!!rq`!*N!QJVrX!!%#QY[Bf`0!*N!!@d!!!#U!+hrV`VrV`!%#Q0QEf`'!*S!!rq
+Z!*[rV3VrVJ!%#QPZFfJ0!*X!!M3!!!#`!,MrV!#F#[qX!!3+BfC[E!d!R!!"E`!
+!!,3!YrqV#rqV!#B`!"&TEQ0XG@4PCQpXC'9bF'&dD!!4D@jME(9NC8C[E'4PFP"
+KG'J'rkd!!!)!P`!#!*d!RJd!R3!#FJ!!!,m!aJ#I!+!0!*m!!Q`"!!#r!-)!SIq
+U$3#K!!%a!!!![`$#rkN+rkN!"!TbFfad!IqU!!!0!+!!!@m!!!!!!!$rU![rU!!
+Z-!!9G'KPEQ9hCQpXC'9bFQ9QCA*PEQ0P!"9dD'91CAG'EfaNCA*5C@CPFQ9ZBf8
+#!*i!!J#L!+-0!+)!!dN!!J$(!-lrT`#NrkB+rkF!'#jYDA0MFfaMG#SU+LS!!!!
+!!!#3!!!U+LSU$3#N!!&[!!!!a`$+rk8,rk8!,M!!&A4SC@jPGfC[E'4PFR*PCQ9
+bC@jMC3!9G'KP6Q9h4QpXC'9b8Q9QCA*PEQ0P![qQ!!!#!+-!!J#P!+B0!+8!!R)
+!!!$2!0`!T`#S$3#R!!&Y!!!!c`$5!+N-!+N!$3!(Eh"PER0cE!!#!!!0!+J!!Qi
+!!!!!!!!!UJ#V$3#U!!%a!!!!e`$Erk3+rk3!"!T`EQ&Y$3#V!!%a!!!!dJ$Ark-
++rk-!"!TcC@aP!J#Q!!)!V!#Y$3#X!!*X!!)!h3$Grk,rS3(rSJ!!!IqK!!!#!+d
+!!J#Z!+m0!+i!!Q`!!3$G!0hrS!#`!IqJ!!!-!,!!(`!C)&0dBA*d)'eKDfPZCb"
+dD'8JB@aTBA0PF`!#!!!#!+m!!J#a!,)0!,%!!dN!!J$G!3ArRrqH!,-+rjm!'#j
+MEh*PBh*PE#SU+LS!!!!!!!#3!!"ZG@aX!IqH!!!'!,-!!rqG!,3!Y3VrR3!%#QY
+[Bf`0!,3!!@d!!!$K!16rR!VrR!!%#Q&XD@%'!,8!!rqE!,B!Y`VrQ`!%#QPZFfJ
+0!,B!!M3!!!$R!1rrQJ#i#[qD!!3+BfC[E!d!Z!!"E`!!!1X!l[qC#rqC!$3`!"K
+[F'9ZFh0XD@jME(9NC@C[E'4PFR"KG'J!''p`C@j68da*EQ0XG@4P4QpXC'9b8'&
+dD!B!Y`!$rjJ!ZIqA#[qB!!3+G'mJ)!d!Z3!#EJ!!!2)!r`#k!,X0!,S!!M3!!!$
+i!2rrPJ#m#[q@!!3+CQPXC3d![!!"E3!!!2X!rJ#p$!#p!"-!$@p`C@jcFfaMEfj
+Q,QJ!!J!!$3#l!!)d!!!!mJ$irj8![JVrP3!%#Q0QEf`0!,i!!@m!!!$f!2IrP![
+rP!!@-!!*G'KPE@9`BA4S!!PdD'90C9"KG'J'rjF!!!)!XJ!#!,m!`!d![`!#E!!
+#!3B""[q6rj)"rj-!!!(rNJ!!!J$!!!)!`3$#$3$"!!*b!!!""J%4!--!a!d!``!
+#BJ!!!3B"$3$&!-B0!-8!!@m!!!%'!3RrN3[rN3!N-!!3Bh*jF(4[CQpXC'9bF'&
+dD!!3Bh*jF(4[4QpXC'9b8'&dD!d!aJ!"E3!!!3N"$!$($!$(!!X!"6TKFfia!!)
+!!!d!a!!"E`!!!!!!!2q3!![rN!!!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!)!`J!
+#!-J!b3d!b!!$53!#!4)"22q2rii!bJVrM`!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!
+!!'jeE'`"rii!!!B!bJ!$rid!b`$-#[q0!!3+DfpME!d!b`!"E3!!!4B"'Iq-#[q
+-!!3+B@aTB3B!c!!$riX!c3$1#[q,!!3+D@jcD!d!c3!#0!!!!4`"*2q+!-m+riS
+!"!TMCQpX$3$2!!&[!!!")!%MriN,riN!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9
+bF'&dD!!BEh"PEP066%PZBfaeC'9'EfaNCA*3BA4S"J$1!!2rL!$3riF+riJ!"!T
+dEb!J$3$3!!*Z!!!"*`%f!0%!dJd!d3!#0!!!!5m"0[q'!0-+riB!"!TQD@aP$3$
+6!!&Y!!!"-J%e!03-!03!$!!'BA0Z-5jS!!)!!!d!dJ!#0!!!!5F",rq&!08+ri8
+!"!TMCQpX$3$9!!&[!!!"+`%Zri3,ri3!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!E
+rK`!!!J$*!!)!eJ$A$3$@!!0*!!)"23&Rri2rJJ$B#[q$!"JZBfpbC@0bC@`U+LS
+U!!!!!!!!N!!!ER9XE!(rJJ!!"J$B!!2rJ3$C!0S+ri%!"!TVEf0X$3$C!!&Y!!!
+"33&%ri!+ri!!"!TKE'PK"J$D!!2rI`$E!0`+rhm!"!TTER0S$3$E!!)d!!!"4`&
+2rhi!h3VrIJ!%#Q0QEf`0!0d!!@m!!!&,!8lrI3[rI3!d-!!BEh"PER0cE'PZBfa
+eC'9QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9NC8C[E'4PFP"KG'J'!0`!!rpm!0l
+rH`VrI!!%#R4[)#!0!0i!!Qi!!!&5!@%!h`$J$3$I!!)d!!!"@J&KrhS!i3VrHJ!
+%#QCTE'80!1%!!@d!!!&G!@!!iJ`!iJ!3!!TKFfiaAfeKBbjS!!)!!!d!i!!#0!!
+!!9)"@[pj!1-+rhN!"!TMCQpX$3$M!!&[!!!"9J&CrhJ,rhJ!&$!!#(4PEA"`BA4
+S!!KdC@e`8'&dD!ErH`!!!J$A!!)!j!$P$3$N!!*X!!)"D!&SrhIrGJ(rG`!!!Ip
+f!!!#!18!!J$Q!1F0!1B!!R)!!!&S!A-!k!$T$3$S!!*L!!!"D!&[!1S!k`d!kJ!
+"E`!!!@J"Drpe#rpe!#3`!""MFRP`G'pQEfaNCA*`BA4S!""MFRP`G'p'EfaNCA*
+3BA4S$3$V!!&Y!!!"D`&Z!1`-!1`!#J!%1Q*TE`!#!!!0!1N!!@m!!!!!!!$rG![
+rG!!8-!!)G'9YF("KG'J!#(4PEA"3BA4S!J$R!!)!l3$Z$3$Y!!0*!!)"G!'Hrh2
+rFJ$[#[pc!"JZBfpbC@0bC@`U+LSU!!!!!!!!N!!!ER9XE!(rFJ!!"J$[!!2rF3$
+`!2%+rh%!"!TVEf0X$3$`!!&Y!!!"H!&lrh!+rh!!"!TKE'PK"J$a!!2rE`$b!2-
++rfm!"!TTER0S$3$b!!)d!!!"IJ''rfi!p!VrEJ!%#Q0QEf`0!23!!@m!!!'#!BA
+rE3[rE3!d-!!BEh"PER0cE'PZBfaeC'9QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9
+NC8C[E'4PFP"KG'J'!2-!!rpX!2ArD`VrE!!%#R4[)#!0!28!!Qi!!!'*!CJ!pJ$
+h$3$f!!)d!!!"N3'BrfS!q!VrDJ!%#QCTE'80!2J!!@d!!!'8!CF!q3`!q3!,!!9
+LD@mZD!!#!!!0!2F!!M3!!!'*!C(rD3$k#[pT!!3+BfC[E!d!qJ!"E`!!!Bd"N!$
+rD![rD!!8-!!)G'9YF("KG'J!#(4PEA"3BA4S"[pV!!!#!1i!!J$l!2`0!2X!!Q`
+!!J'I!CrrCrpQ!IpR!!!"rfB!!!)!r!!#!2d!rJd!r3!#FJ!!!Cm"UJ$r!3!0!2m
+!!Q)!!!'I!DB"!3%#$3%"!!&[!!!"R`'Lrf8,rf8!*$!!%'0bHA"dEfC[E'4PFR"
+KG'J!%'0bHA"dEdC[E'4PFP"KG'J0!3)!!@d!!!'L!D8"!``"!`!*!!-kBQB!!J!
+!$3%!!!&[!!!!!!!!rf3,rf3!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!)!rJ!#!33
+""3d""!!$53!#!DX"eIpMrf)""JVrB`!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'j
+eE'`"rf)!!!B""J!$rf%""`%)#[pK!!3+DfpME!d""`!"E3!!!Dm"X[pJ#[pJ!!3
++B@aTB3B"#!!$rem"#3%+#[pI!!3+D@jcD!d"#3!#0!!!!E8"[IpH!3X+rei!"!T
+MCQpX$3%,!!&[!!!"Z3'mred,red!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&
+dD!!BEh"PEP066%PZBfaeC'9'EfaNCA*3BA4S"J%+!!2rA!%-reX+re`!"!TdEb!
+J$3%-!!*Z!!!"`!(2!3d"$Jd"$3!#0!!!!FJ"crpD!3m+reS!"!TQD@aP$3%2!!&
+Y!!!"b`(1!4!-!4!!%!!+BQa[GfCTFfJZD!!#!!!0!3i!!M3!!!(!!FMr@3%4#[p
+C!!3+BfC[E!d"%3!"E`!!!F3"arpB#rpB!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J
+'reX!!!)""3!#!4)"%`d"%J!#E!!#!GB"e[pAreB"reF!!!(r9J!!!J%6!!)"&!%
+9$3%8!!*b!!!"eJ(K!4B"&`d"&J!#BJ!!!GB"h3%B!4N0!4J!!@m!!!(@!GRr93[
+r93!N-!!3Bh*jF(4[CQpXC'9bF'&dD!!3Bh*jF(4[4QpXC'9b8'&dD!d"'3!"E3!
+!!GN"h!%D$!%D!!N!!cTLEJ!#!!!0!4F!!@m!!!!!!!$r9![r9!!8-!!)G'9YF("
+KG'J!#(4PEA"3BA4S!J%9!!)"'`%F$3%E!!0*!!)"iJ)-re2r8J%G#[p6!"JZBfp
+bC@0bC@`U+LSU!!!!!!!!N!!!ER9XE!(r8J!!"J%G!!2r83%H!4m+re%!"!TVEf0
+X$3%H!!&Y!!!"jJ(Tre!+re!!"!TKE'PK"J%I!!2r6`%J!5%+rdm!"!TTER0S$3%
+J!!)d!!!"l!(drdi")JVr6J!%#Q0QEf`0!5)!!@m!!!(`!I2r63[r63!d-!!BEh"
+PER0cE'PZBfaeC'9QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9NC8C[E'4PFP"KG'J
+'!5%!!rp-!52r5`Vr6!!%#R4[)#!0!5-!!Qi!!!(h!JB"*!%P$3%N!!)d!!!"r`)
+'rdS"*JVr5J!%#QCTE'80!5B!!@d!!!)#!J8"*``"*`!+!!4LELjS!!)!!!d"*3!
+#0!!!!IF"rrp*!5J+rdN!"!TMCQpX$3%S!!&[!!!"q`(qrdJ,rdJ!&$!!#(4PEA"
+`BA4S!!KdC@e`8'&dD!Er5`!!!J%F!!)"+3%U$3%T!!*X!!)#$3)0rdIr4J(r4`!
+!!Ip'!!!#!5S!!J%V!5`0!5X!!R)!!!)0!KJ",3%Z$3%Y!!*L!!!#$3)8!5m"-!d
+",`!"E`!!!Jd#%2p&#rp&!#3`!""MFRP`G'pQEfaNCA*`BA4S!""MFRP`G'p'Efa
+NCA*3BA4S$3%`!!&Y!!!#%!)6!6%-!6%!$3!(1Q*eCQCPFJ!#!!!0!5i!!@m!!!!
+!!!$r4![r4!!8-!!)G'9YF("KG'J!#(4PEA"3BA4S!J%X!!)"-J%c$3%b!!0*!!)
+#'3*$rd2r3J%d#[p$!"JZBfpbC@0bC@`U+LSU!!!!!!!!N!!!ER9XE!(r3J!!"J%
+d!!2r33%e!6B+rd%!"!TVEf0X$3%e!!&Y!!!#(3)Jrd!+rd!!"!TKE'PK"J%f!!2
+r2`%h!6J+rcm!"!TTER0S$3%h!!)d!!!#)`)Vrci"13Vr2J!%#Q0QEf`0!6N!!@m
+!!!)R!LVr23[r23!d-!!BEh"PER0cE'PZBfaeC'9QEfaNCA*`BA4S!"K[F'9Z8e0
+-5@jME(9NC8C[E'4PFP"KG'J'!6J!!rmm!6Vr1`Vr2!!%#R4[)#!0!6S!!Qi!!!)
+Z!Md"1`%m$3%l!!)d!!!#0J)prcS"23Vr1J!%#QCTE'80!6d!!@d!!!)j!M`"2J`
+"2J!1!!KLG@CQCA)ZD!!#!!!0!6`!!M3!!!)Z!MEr13%r#[mj!!3+BfC[E!d"2`!
+"E`!!!M)#0Imi#rmi!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J'rcX!!!)"-`!#!8!
+"33d"3!!#E!!#!N3#42mhrcB"rcF!!!(r0J!!!J&"!!)"3J&$$3&#!!*b!!!#4!*
+2!83"43d"4!!#BJ!!!N3#5`&'!8F0!8B!!@m!!!*%!NIr03[r03!N-!!3Bh*jF(4
+[CQpXC'9bF'&dD!!3Bh*jF(4[4QpXC'9b8'&dD!d"4`!"E3!!!NF#5J&)$!&)!!X
+!"6TMBA0d!!)!!!d"43!"E`!!!!!!!2md#rmd!"3`!!KdC@e`F'&dD!!)G'9YF&"
+KG'J#!8-!!J&*!8S0!8N!!dN!!J*3!RVr-rmb!8X+rc-!'#jMEh*PBh*PE#SU+LS
+!!!!!!!#3!!"ZG@aX!Imb!!!'!8X!!rma!8`"63Vr-3!%#QY[Bf`0!8`!!@d!!!*
+8!PIr-!Vr-!!%#Q&XD@%'!8d!!rm[!8i"6`Vr,`!%#QPZFfJ0!8i!!M3!!!*D!Q,
+r,J&3#[mZ!!3+BfC[E!d"8!!"E`!!!Pi#BImY#rmY!$3`!"K[F'9ZFh0XD@jME(9
+NC@C[E'4PFR"KG'J!''p`C@j68da*EQ0XG@4P4QpXC'9b8'&dD!B"6`!$rb`"8Im
+V#[mX!!3+G'mJ)!d"83!#EJ!!!Q8#G!&5!9-0!9)!!M3!!!*Y!R6r+J&8#[mU!!3
++CQPXC3d"9!!"E3!!!R!#F`&9$!&9!!`!"Q0KFh3ZD!!#!!!0!9-!!M3!!!*P!Qh
+r+3&@#[mT!!3+BfC[E!d"9J!"E`!!!QN#E2mS#rmS!"3`!!KdC@e`F'&dD!!)G'9
+YF&"KG'J'rbX!!!)"5J!#!9F"@!d"9`!#E!!#!RX#HrmRrbB"rbF!!!(r*J!!!J&
+B!!)"@3&D$3&C!!*b!!!#H`+'!9X"A!d"@`!#BJ!!!RX#JJ&G!9i0!9d!!@m!!!*
+l!Rlr*3[r*3!N-!!3Bh*jF(4[CQpXC'9bF'&dD!!3Bh*jF(4[4QpXC'9b8'&dD!d
+"AJ!"E3!!!Ri#J3&I$!&I!!X!"6TMEfe`!!)!!!d"A!!"E`!!!!!!!2mN#rmN!"3
+`!!KdC@e`F'&dD!!)G'9YF&"KG'J#!9S!!J&J!@%0!@!!!dN!!J+(!V(r)rmL!@)
++rb-!'#jMEh*PBh*PE#SU+LS!!!!!!!#3!!"ZG@aX!ImL!!!'!@)!!rmK!@-"C!V
+r)3!%#QY[Bf`0!@-!!@d!!!+,!Slr)!Vr)!!%#Q&XD@%'!@3!!rmI!@8"CJVr(`!
+%#QPZFfJ0!@8!!M3!!!+4!TRr(J&R#[mH!!3+BfC[E!d"C`!"E`!!!T8#Q2mG#rm
+G!$3`!"K[F'9ZFh0XD@jME(9NC@C[E'4PFR"KG'J!''p`C@j68da*EQ0XG@4P4Qp
+XC'9b8'&dD!B"CJ!$ra`"D2mE#[mF!!3+G'mJ)!d"D!!#EJ!!!T`#U`&T!@S0!@N
+!!M3!!!+N!U[r'J&V#[mD!!3+CQPXC3d"D`!"E3!!!UF#UJ&X$!&X!!`!"Q0[EA!
+ZD!!#!!!0!@S!!M3!!!+F!U6r'3&Y#[mC!!3+BfC[E!d"E3!"E`!!!U!#SrmB#rm
+B!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J'raX!!!)"B3!#!@i"E`d"EJ!#E!!#!V)
+#X[mAraB"raF!!!(r&J!!!J&[!!)"F!&a$3&`!!*b!!!#XJ+p!A)"F`d"FJ!#BJ!
+!!V)#Z3&d!A80!A3!!@m!!!+b!VAr&3[r&3!N-!!3Bh*jF(4[CQpXC'9bF'&dD!!
+3Bh*jF(4[4QpXC'9b8'&dD!d"G3!"E3!!!V8#Z!&f$!&f!!X!"6TMEfjQ!!)!!!d
+"F`!"E`!!!!!!!2m8#rm8!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J#!A%!!J&h!AJ
+0!AF!!dN!!J+q!ZMr%rm5!AN+ra-!'#jMEh*PBh*PE#SU+LS!!!!!!!#3!!"ZG@a
+X!Im5!!!'!AN!!rm4!AS"H`Vr%3!%#QY[Bf`0!AS!!@d!!!,#!XAr%!Vr%!!%#Q&
+XD@%'!AX!!rm2!A`"I3Vr$`!%#QPZFfJ0!A`!!M3!!!,)!Y$r$J&q#[m1!!3+BfC
+[E!d"IJ!"E`!!!X`#crm0#rm0!$3`!"K[F'9ZFh0XD@jME(9NC@C[E'4PFR"KG'J
+!''p`C@j68da*EQ0XG@4P4QpXC'9b8'&dD!B"I3!$r``"Irm,#[m-!!3+G'mJ)!d
+"I`!#EJ!!!Y-#iJ'!!B%0!B!!!M3!!!,E!Z,r#J'##[m+!!3+CQPXC3d"JJ!"E3!
+!!Yi#i3'$$!'$!!`!"Q0[EQBZD!!#!!!0!B%!!M3!!!,6!Y[r#3'%#[m*!!3+BfC
+[E!d"K!!"E`!!!YF#f[m)#rm)!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J'r`X!!!)
+"H!!#!B8"KJd"K3!#E!!#!ZN#kIm(r`B"r`F!!!(r"J!!!J''!!)"K`')$3'(!!*
+b!!!#k3,d!BN"LJd"L3!#BJ!!!ZN#m!',!B`0!BX!!@m!!!,T!Zcr"3[r"3!N-!!
+3Bh*jF(4[CQpXC'9bF'&dD!!3Bh*jF(4[4QpXC'9b8'&dD!d"M!!"E3!!!Z`#l`'
+0$!'0!!S!"$TNCA-!!J!!$3'+!!&[!!!!!!!!r`3,r`3!&$!!#(4PEA"`BA4S!!K
+dC@e`8'&dD!)"L!!#!Bi"M`d"MJ!$53!#![8$(rm$r`)"N!!+r`-!'#jMEh*PBh*
+PE#SU+LS!!!!!!!#3!!"ZG@aX!Im#!!!'!C!!!!2r!3'4!C)+r`%!"!TVEf0X$3'
+4!!&Y!!!#q3,mr`!+r`!!"!TKE'PK"J'5!!2qr`'6!C3+r[m!"!TTER0S$3'6!!)
+d!!!#r`-(r[i"P3VqrJ!%#Q0QEf`0!C8!!@m!!!-$!`Eqr3[qr3!d-!!BEh"PER0
+cE'PZBfaeC'9QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9NC8C[E'4PFP"KG'J'!C3
+!!rlm!CEqq`Vqr!!%#R4[)#!0!CB!!Qi!!!-+!aN"P`'B$3'A!!)d!!!$%J-Cr[S
+"Q3VqqJ!%#QCTE'80!CN!!@d!!!-9!aJ"QJ`"QJ!,!!9NCA-ZD!!#!!!0!CJ!!M3
+!!!-+!a,qq3'E#[lj!!3+BfC[E!d"Q`!"E`!!!`i$%Ili#rli!"3`!!KdC@e`F'&
+dD!!)G'9YF&"KG'J'r[X!!!)"M`!#!C`"R3d"R!!#E!!#!b!$)2lhr[B"r[F!!!(
+qpJ!!!J'G!!)"RJ'I$3'H!!*b!!!$)!-V!D!"S3d"S!!#BJ!!!b!$*`'L!D-0!D)
+!!@m!!!-J!b2qp3[qp3!N-!!3Bh*jF(4[CQpXC'9bF'&dD!!3Bh*jF(4[4QpXC'9
+b8'&dD!d"S`!"E3!!!b-$*J'N$!'N!!N!!cTND!!#!!!0!D%!!@m!!!!!!!$qp![
+qp!!8-!!)G'9YF("KG'J!#(4PEA"3BA4S!J'I!!)"T3'Q$3'P!!0*!!)$,!0@r[2
+qmJ'R#[lc!"JZBfpbC@0bC@`U+LSU!!!!!!!!N!!!ER9XE!(qmJ!!"J'R!!2qm3'
+S!DN+r[%!"!TVEf0X$3'S!!&Y!!!$-!-cr[!+r[!!"!TKE'PK"J'T!!2ql`'U!DX
++rZm!"!TTER0S$3'U!!)d!!!$0J-qrZi"V!VqlJ!%#Q0QEf`0!D`!!@m!!!-k!ch
+ql3[ql3!d-!!BEh"PER0cE'PZBfaeC'9QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9
+NC8C[E'4PFP"KG'J'!DX!!rlX!Dhqk`Vql!!%#R4[)#!0!Dd!!Qi!!!0"!e!"VJ'
+[$3'Z!!)d!!!$5303rZS"X!VqkJ!%#QCTE'80!E!!!@d!!!0-!dm"X3`"X3!+!!4
+ND#jS!!)!!!d"V`!#0!!!!d%$5IlT!E)+rZN!"!TMCQpX$3'b!!&[!!!$430)rZJ
+,rZJ!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!Eqk`!!!J'Q!!)"X`'d$3'c!!*X!!)
+$9`0ArZIqjJ(qj`!!!IlQ!!!#!E3!!J'e!EB0!E8!!R)!!!0A!f)"Y`'i$3'h!!*
+L!!!$9`0H!EN"ZJd"Z3!"E`!!!eF$@[lP#rlP!#3`!""MFRP`G'pQEfaNCA*`BA4
+S!""MFRP`G'p'EfaNCA*3BA4S$3'k!!&Y!!!$@J0G!EX-!EX!#J!%1Q4cB3!#!!!
+0!EJ!!@m!!!!!!!$qj![qj!!8-!!)G'9YF("KG'J!#(4PEA"3BA4S!J'f!!)"[!'
+p$3'm!!0*!!)$B`10rZ2qiJ'q#[lM!"JZBfpbC@0bC@`U+LSU!!!!!!!!N!!!ER9
+XE!(qiJ!!"J'q!!2qi3'r!F!+rZ%!"!TVEf0X$3'r!!&Y!!!$C`0UrZ!+rZ!!"!T
+KE'PK"J(!!!2qh`("!F)+rYm!"!TTER0S$3("!!)d!!!$E30erYi"``VqhJ!%#Q0
+QEf`0!F-!!@m!!!0a!h6qh3[qh3!d-!!BEh"PER0cE'PZBfaeC'9QEfaNCA*`BA4
+S!"K[F'9Z8e0-5@jME(9NC8C[E'4PFP"KG'J'!F)!!rlF!F6qf`Vqh!!%#R4[)#!
+0!F3!!Qi!!!0i!iF"a3('$3(&!!)d!!!$J!1(rYS"a`VqfJ!%#QCTE'80!FF!!@d
+!!!1$!iB"b!`"b!!,!!9NFf%ZD!!#!!!0!FB!!M3!!!0i!i$qf3(*#[lC!!3+BfC
+[E!d"b3!"E`!!!h`$IrlB#rlB!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J'rYX!!!)
+"[3!#!FS"b`d"bJ!#E!!#!ii$M[lArYB"rYF!!!(qeJ!!!J(,!!)"c!(0$3(-!!*
+b!!!$MJ1C!Fi"c`d"cJ!#BJ!!!ii$P3(3!G%0!G!!!@m!!!11!j(qe3[qe3!N-!!
+3Bh*jF(4[CQpXC'9bF'&dD!!3Bh*jF(4[4QpXC'9b8'&dD!d"d3!"E3!!!j%$P!(
+5$!(5!!S!"$TPFR)!!J!!$3(2!!&[!!!!!!!!rY3,rY3!&$!!#(4PEA"`BA4S!!K
+dC@e`8'&dD!)"c3!#!G-"e!d"d`!$53!#!jS$a2l6rY)"e3Vqd`!B,Q0[FQ9MFQ9
+X+LSU+J!!!!!!!*!!!'jeE'`"rY)!!!B"e3!$rY%"eJ(A#[l4!!3+DfpME!d"eJ!
+"E3!!!ji$SIl3#[l3!!3+B@aTB3B"e`!$rXm"f!(C#[l2!!3+D@jcD!d"f!!#0!!
+!!k3$V2l1!GS+rXi!"!TMCQpX$3(D!!&[!!!$U!1VrXd,rXd!0$!!''p`C@jcFfa
+TEQ0XG@4PCQpXC'9bF'&dD!!BEh"PEP066%PZBfaeC'9'EfaNCA*3BA4S"J(C!!2
+qc!(ErXX+rX`!"!TdEb!J$3(E!!*Z!!!$V`1q!G`"h3d"h!!#0!!!!lF$[[l+!Gi
++rXS!"!TQD@aP$3(H!!&Y!!!$ZJ1p!Gm-!Gm!#`!&CA*b,QJ!!J!!$3(G!!)d!!!
+$V`1hrXN"i!Vqb3!%#Q0QEf`0!H!!!@m!!!1c!lEqb![qb!!8-!!)G'9YF("KG'J
+!#(4PEA"3BA4S"[l,!!!#!G3!!J(K!H)0!H%!!Q`!!J2&!mAqarl'!Il(!!!"rXB
+!!!)"iJ!#!H-"j!d"i`!#FJ!!!m8$d!(P!HB0!H8!!Q)!!!2&!m`"j`(S$3(R!!&
+[!!!$a32)rX8,rX8!*$!!%'0bHA"dEfC[E'4PFR"KG'J!%'0bHA"dEdC[E'4PFP"
+KG'J0!HJ!!@d!!!2)!mX"k3`"k3!+!!3kCAC`!!)!!!d"jJ!"E`!!!!!!!2l%#rl
+%!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J#!H3!!J(U!HX0!HS!!dN!!J24!r[q`rl
+#!H`+rX-!'#jMEh*PBh*PE#SU+LS!!!!!!!#3!!"ZG@aX!Il#!!!'!H`!!rl"!Hd
+"lJVq`3!%#QY[Bf`0!Hd!!@d!!!29!pMq`!Vq`!!%#Q&XD@%'!Hi!!rkr!Hm"m!V
+q[`!%#QPZFfJ0!Hm!!M3!!!2E!q2q[J(a#[kq!!3+BfC[E!d"m3!"E`!!!pm$i[k
+p#rkp!$3`!"K[F'9ZFh0XD@jME(9NC@C[E'4PFR"KG'J!''p`C@j68da*EQ0XG@4
+P4QpXC'9b8'&dD!B"m!!$rV`"m[kl#[km!!3+G'mJ)!d"mJ!#EJ!!!qB$p3(c!I3
+0!I-!!M3!!!2Z!rAqZJ(e#[kk!!3+CQPXC3d"p3!"E3!!!r%$p!(f$!(f!!X!"@9
+fF#jS!!)!!!d"p!!#0!!!!qB$l[kj!IF+rVN!"!TMCQpX$3(h!!&[!!!$kJ2YrVJ
+,rVJ!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!EqZ`!!!J(V!!)"q!(j$3(i!!*X!!)
+$r!2mrVIqYJ(qY`!!!Ikf!!!#!IN!!J(k!IX0!IS!!R)!!!2m"!F"r!(p$3(m!!*
+L!!!$r!3$!Ii"r`d"rJ!"E`!!!r`$rrke#rke!#3`!""MFRP`G'pQEfaNCA*`BA4
+S!""MFRP`G'p'EfaNCA*3BA4S$3(r!!&Y!!!$r`3#!J!-!J!!#`!&1QKYB@-!!J!
+!$3(p!!&[!!!!!!!!rV3,rV3!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!)"q`!#!J%
+#!Jd#!3!$53!#"!J%-[kcrV)#!`VqX`!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'j
+eE'`"rV)!!!B#!`!$rV%#"!)&#[ka!!3+DfpME!d#"!!"E3!!"!`%$rk`#[k`!!3
++B@aTB3B#"3!$rUm#"J)(#[k[!!3+D@jcD!d#"J!#0!!!"")%'[kZ!JJ+rUi!"!T
+MCQpX$3))!!&[!!!%&J3CrUd,rUd!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&
+dD!!BEh"PEP066%PZBfaeC'9'EfaNCA*3BA4S"J)(!!2qV!)*rUX+rU`!"!TdEb!
+J$3)*!!*Z!!!%(33X!JS##`d##J!#0!!!"#8%,2kU!J`+rUS!"!TQD@aP$3)-!!&
+Y!!!%+!3V!Jd-!Jd!$!!'D'eKBbjS!!)!!!d##`!#0!!!""d%*IkT!Ji+rUN!"!T
+MCQpX$3)1!!&[!!!%)33NrUJ,rUJ!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!EqU`!
+!!J)#!!)#$`)3$3)2!!*X!!)%-`3crUIqTJ(qT`!!!IkQ!!!#!K!!!J)4!K)0!K%
+!!R)!!!3c"$i#%`)8$3)6!!*L!!!%-`3k!K8#&Jd#&3!"E`!!"$-%0[kP#rkP!#3
+`!""MFRP`G'pQEfaNCA*`BA4S!""MFRP`G'p'EfaNCA*3BA4S$3)@!!&Y!!!%0J3
+j!KF-!KF!#`!&1QPNC@%!!J!!$3)8!!&[!!!!!!!!rU3,rU3!&$!!#(4PEA"`BA4
+S!!KdC@e`8'&dD!)#%J!#!KJ#'3d#'!!$53!#"$m%DIkMrU)#'JVqS`!B,Q0[FQ9
+MFQ9X+LSU+J!!!!!!!*!!!'jeE'`"rU)!!!B#'J!$rU%#'`)F#[kK!!3+DfpME!d
+#'`!"E3!!"%-%4[kJ#[kJ!!3+B@aTB3B#(!!$rTm#(3)H#[kI!!3+D@jcD!d#(3!
+#0!!!"%N%8IkH!Km+rTi!"!TMCQpX$3)I!!&[!!!%6343rTd,rTd!0$!!''p`C@j
+cFfaTEQ0XG@4PCQpXC'9bF'&dD!!BEh"PEP066%PZBfaeC'9'EfaNCA*3BA4S"J)
+H!!2qR!)JrTX+rT`!"!TdEb!J$3)J!!*Z!!!%9!4M!L%#)Jd#)3!#0!!!"&`%Brk
+D!L-+rTS!"!TQD@aP$3)M!!&Y!!!%A`4L!L3-!L3!$!!'D@4PB5jS!!)!!!d#)J!
+#0!!!"&3%A2kC!L8+rTN!"!TMCQpX$3)P!!&[!!!%@!4ErTJ,rTJ!&$!!#(4PEA"
+`BA4S!!KdC@e`8'&dD!EqQ`!!!J)C!!)#*J)R$3)Q!!*X!!)%DJ4UrTIqPJ(qP`!
+!!Ik@!!!#!LF!!J)S!LN0!LJ!!R)!!!4U"(8#+J)V$3)U!!*L!!!%DJ4a!L`#,3d
+#,!!"E`!!"'S%EIk9#rk9!#3`!""MFRP`G'pQEfaNCA*`BA4S!""MFRP`G'p'Efa
+NCA*3BA4S$3)Y!!&Y!!!%E34`!Li-!Li!$!!'1QaSBA0S!!)!!!d#+`!"E`!!!!!
+!!2k8#rk8!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J#!LN!!J)[!M!0!Lm!!dN!!J4
+f"+$qNrk5!M%+rT-!'#jMEh*PBh*PE#SU+LS!!!!!!!#3!!"ZG@aX!Ik5!!!'!M%
+!!rk4!M)#-`VqN3!%#QY[Bf`0!M)!!@d!!!4k"(hqN!!+rT!!!!3+B@aTB3B#-`!
+$rSm#0!)e#[k2!!3+D@jcD!d#0!!#0!!!")!%L2k1!MB+rSi!"!TMCQpX$3)f!!&
+[!!!%K!5(rSd,rSd!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&dD!!BEh"PEP0
+66%PZBfaeC'9'EfaNCA*3BA4S"J)e!!2qM!)hrSX+rS`!"!TdEb!J$3)h!!*Z!!!
+%L`5D!MJ#13d#1!!#0!!!"*-%Q[k+!MS+rSS!"!TQD@aP$3)k!!&Y!!!%PJ5C!MX
+-!MX!$3!(E'KKFfJZD!!#!!!0!MN!!M3!!!5,"*2qL3)m#[k*!!3+BfC[E!d#2!!
+"E`!!")m%N[k)#rk)!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J'rSX!!!)#-!!#!Md
+#2Jd#23!#E!!#"+%%SIk(rSB"rSF!!!(qKJ!!!J)q!!)#2`*!$3)r!!*b!!!%S35
+X!N%#3Jd#33!#BJ!!"+%%U!*$!N30!N-!!@m!!!5K"+6qK3[qK3!N-!!3Bh*jF(4
+[CQpXC'9bF'&dD!!3Bh*jF(4[4QpXC'9b8'&dD!d#4!!"E3!!"+3%T`*&$!*&!!S
+!"$TYC$)!!J!!$3*#!!&[!!!!!!!!rS3,rS3!&$!!#(4PEA"`BA4S!!KdC@e`8'&
+dD!)#3!!#!NB#4`d#4J!$53!#"+d%erk$rS)#5!VqJ`!B,Q0[FQ9MFQ9X+LSU+J!
+!!!!!!*!!!'jeE'`"rS)!!!B#5!!$rS%#53*+#[k"!!3+DfpME!d#53!"E3!!",%
+%Y2k!#[k!!!3+B@aTB3B#5J!$rRm#5`*-#[jr!!3+D@jcD!d#5`!#0!!!",F%[rj
+q!Nd+rRi!"!TMCQpX$3*0!!&[!!!%Z`5qrRd,rRd!0$!!''p`C@jcFfaTEQ0XG@4
+PCQpXC'9bF'&dD!!BEh"PEP066%PZBfaeC'9'EfaNCA*3BA4S"J*-!!2qI!*1rRX
++rR`!"!TdEb!J$3*1!!*Z!!!%`J64!Nm#8!d#6`!#0!!!"-S%dIjk!P%+rRS!"!T
+QD@aP$3*4!!&Y!!!%c363!P)-!P)!#`!&E@3b,QJ!!J!!$3*3!!)d!!!%`J6+rRN
+#8`VqH3!%#Q0QEf`0!P-!!@m!!!6'"-RqH![qH!!8-!!)G'9YF("KG'J!#(4PEA"
+3BA4S"[jl!!!#!NF!!J*8!P80!P3!!Q`!!J6B"0MqGrjf!Ijh!!!"rRB!!!)#93!
+#!PB#9`d#9J!#FJ!!"0J%i`*B!PN0!PJ!!Q)!!!6B"0m#@J*E$3*D!!&[!!!%f!6
+ErR8,rR8!*$!!%'0bHA"dEfC[E'4PFR"KG'J!%'0bHA"dEdC[E'4PFP"KG'J0!PX
+!!@d!!!6E"0i#A!`#A!!+!!3kE@3e!!)!!!d#@3!"E`!!!!!!!2jd#rjd!"3`!!K
+dC@e`F'&dD!!)G'9YF&"KG'J#!PF!!J*G!Pi0!Pd!!dN!!J6N"3lqFrjb!Pm+rR-
+!'#jMEh*PBh*PE#SU+LS!!!!!!!#3!!"ZG@aX!Ijb!!!'!Pm!!rja!Q!#B3VqF3!
+%#QY[Bf`0!Q!!!@d!!!6S"1[qF!VqF!!%#Q&XD@%'!Q%!!rj[!Q)#B`VqE`!%#QP
+ZFfJ0!Q)!!M3!!!6Z"2EqEJ*N#[jZ!!3+BfC[E!d#C!!"E`!!"2)%pIjY#rjY!$3
+`!"K[F'9ZFh0XD@jME(9NC@C[E'4PFR"KG'J!''p`C@j68da*EQ0XG@4P4QpXC'9
+b8'&dD!B#B`!$rQ`#CIjV#[jX!!3+G'mJ)!d#C3!#EJ!!"2N&#!*Q!QF0!QB!!M3
+!!!8""3MqDJ*S#[jU!!3+CQPXC3d#D!!"E3!!"33&"`*T$!*T!!X!"@eN05jS!!)
+!!!d#C`!#0!!!"2N&!IjT!QS+rQN!"!TMCQpX$3*U!!&[!!!%r38!rQJ,rQJ!&$!
+!#(4PEA"`BA4S!!KdC@e`8'&dD!EqD`!!!J*H!!)#D`*X$3*V!!*X!!)&$`82rQI
+qCJ(qC`!!!IjQ!!!#!Q`!!J*Y!Qi0!Qd!!R)!!!82"4S#E`*`$3*[!!*L!!!&$`8
+@!R%#FJd#F3!"E`!!"3m&%[jP#rjP!#3`!""MFRP`G'pQEfaNCA*`BA4S!""MFRP
+`G'p'EfaNCA*3BA4S$3*b!!&Y!!!&%J89!R--!R-!#`!&1QeNBc)!!J!!$3*`!!&
+[!!!!!!!!rQ3,rQ3!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!)#EJ!#!R3#G3d#G!!
+$53!#"4X&4IjMrQ)#GJVqB`!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'jeE'`"rQ)
+!!!B#GJ!$rQ%#G`*i#[jK!!3+DfpME!d#G`!"E3!!"4m&)[jJ#[jJ!!3+B@aTB3B
+#H!!$rPm#H3*k#[jI!!3+D@jcD!d#H3!#0!!!"58&,IjH!RX+rPi!"!TMCQpX$3*
+l!!&[!!!&+38XrPd,rPd!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&dD!!BEh"
+PEP066%PZBfaeC'9'EfaNCA*3BA4S"J*k!!2qA!*mrPX+rP`!"!TdEb!J$3*m!!*
+Z!!!&-!8r!Rd#IJd#I3!#0!!!"6J&2rjD!Rm+rPS!"!TQD@aP$3*r!!&Y!!!&1`8
+q!S!-!S!!$!!'E@4M-LjS!!)!!!d#IJ!#0!!!"6!&12jC!S%+rPN!"!TMCQpX$3+
+"!!&[!!!&0!8hrPJ,rPJ!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!Eq@`!!!J*e!!)
+#JJ+$$3+#!!*X!!)&4J9'rPIq9J(q9`!!!Ij@!!!#!S-!!J+%!S80!S3!!R)!!!9
+'"9%#KJ+($3+'!!*L!!!&4J90!SJ#L3d#L!!"E`!!"8B&5Ij9#rj9!#3`!""MFRP
+`G'pQEfaNCA*`BA4S!""MFRP`G'p'EfaNCA*3BA4S$3+*!!&Y!!!&539-!SS-!SS
+!$J!)1QpLDQ9MG(-!!J!!$3+(!!&[!!!!!!!!rP3,rP3!&$!!#(4PEA"`BA4S!!K
+dC@e`8'&dD!)#K3!#!SX#M!d#L`!$53!#"9)&I2j6rP)#M3Vq8`!B,Q0[FQ9MFQ9
+X+LSU+J!!!!!!!*!!!'jeE'`"rP)!!!B#M3!$rP%#MJ+2#[j4!!3+DfpME!d#MJ!
+"E3!!"9B&@Ij3#[j3!!3+B@aTB3B#M`!$rNm#N!!#N3Vq6`!%#QPZFfJ0!T!!!!)
+d!!!&A!9NrNi#NJVq6J!%#Q0QEf`0!T)!!@m!!!9J"@2q63[q63!d-!!BEh"PER0
+cE'PZBfaeC'9QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9NC8C[E'4PFP"KG'J'!T%
+!!rj-!T2q5`Vq6!!%#R4[)#!0!T-!!Qi!!!9R"AB#P!+9$3+8!!)d!!!&E`9frNS
+#PJVq5J!%#QCTE'80!TB!!@d!!!9b"A8#P``#P`!2!!P[BQTPBh4c,QJ!!J!!$3+
+9!!)d!!!&C`9[rNN#Q!Vq53!%#Q0QEf`0!TJ!!@m!!!9V"@lq5![q5!!8-!!)G'9
+YF("KG'J!#(4PEA"3BA4S"[j,!!!#!S`!!J+C!TS0!TN!!Q`!!J9p"Ahq4rj'!Ij
+(!!!"rNB!!!)#QJ!#!TX#R!d#Q`!#FJ!!"Ad&L!+G!Ti0!Td!!Q)!!!9p"B3#R`+
+J$3+I!!&[!!!&I3@!rN8,rN8!*$!!%'0bHA"dEfC[E'4PFR"KG'J!%'0bHA"dEdC
+[E'4PFP"KG'J0!U!!!@d!!!@!"B-#S3`#S3!+!!3kF'9Y!!)!!!d#RJ!"E`!!!!!
+!!2j%#rj%!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J#!T`!!J+L!U-0!U)!!dN!!J@
+*"E2q3rj#!U3+rN-!'#jMEh*PBh*PE#SU+LS!!!!!!!#3!!"ZG@aX!Ij#!!!'!U3
+!!rj"!U8#TJVq33!%#QY[Bf`0!U8!!@d!!!@0"C!!rN!+rN!!"!TKE'PK"J+Q!!2
+q2`+R!UJ+rMm!"!TTER0S$3+R!!)d!!!&N`@ErMi#U3Vq2J!%#Q0QEf`0!UN!!@m
+!!!@A"CVq23[q23!d-!!BEh"PER0cE'PZBfaeC'9QEfaNCA*`BA4S!"K[F'9Z8e0
+-5@jME(9NC8C[E'4PFP"KG'J'!UJ!!rim!UVq1`Vq2!!%#R4[)#!0!US!!Qi!!!@
+H"Dd#U`+X$3+V!!)d!!!&TJ@YrMS#V3Vq1J!%#QCTE'80!Ud!!@d!!!@T"D`#VJ`
+#VJ!,!!9`C@dZD!!#!!!0!U`!!M3!!!@H"DEq13+[#[ij!!3+BfC[E!d#V`!"E`!
+!"D)&TIii#rii!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J'rMX!!!)#S`!#!V!#X3d
+#X!!$53!#"E3&h[ihrMB#XJVq0`!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'jeE'`
+"rMB!!!B#XJ!$rM8#X`+d#[ie!!3+DfpME!d#X`!"E3!!"EJ&Zrid#[id!!3+B@a
+TB3B#Y!!$rM-#Y3+f#[ic!!3+D@jcD!d#Y3!#0!!!"Ei&a[ib!VF+rM)!"!TMCQp
+X$3+h!!&[!!!&`JA&rM%,rM%!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&dD!!
+BEh"PEP066%PZBfaeC'9'EfaNCA*3BA4S"J+f!!2q-!+irLm+rM!!"!TdEb!J$3+
+i!!*Z!!!&b3AB!VN#ZJd#Z3!#0!!!"G%&f2iZ!VX+rLi!"!TQD@aP$3+l!!&Y!!!
+&e!AA!V`-!V`!$!!'F'9Y-LjS!!)!!!d#ZJ!#0!!!"FN&dIiY!Vd+rLd!"!TMCQp
+X$3+p!!&[!!!&c3A3rL`,rL`!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!Eq,`!!!J+
+a!!)#[J+r$3+q!!*X!!)&h`AIrL[q+J(q+`!!!IiU!!!#!Vm!!J,!!X%0!X!!!R)
+!!!AI"HS#`J,$$3,#!!*L!!!&h`AQ!X3#a3d#a!!"E`!!"Gm&i[iT#riT!#3`!""
+MFRP`G'pQEfaNCA*`BA4S!""MFRP`G'p'EfaNCA*3BA4S$3,&!!&Y!!!&iJAP!XB
+-!XB!$3!(1R"VBh-a-J!#!!!0!X-!!@m!!!!!!!$q+![q+!!8-!!)G'9YF("KG'J
+!#(4PEA"3BA4S!J,"!!)#a`,)$3,(!!0*!!)&k`B9rLIq*J,*#[iR!"JZBfpbC@0
+bC@`U+LSU!!!!!!!!N!!!ER9XE!(q*J!!"J,*!!2q*3,+!XX+rL8!"!TVEf0X$3,
++!!&Y!!!&l`AbrL3+rL3!"!TKE'PK"J,,!!2q)`,-!Xd+rL-!"!TTER0S$3,-!!)
+d!!!&p3AprL)#cJVq)J!%#Q0QEf`0!Xi!!@m!!!Aj"Icq)3[q)3!d-!!BEh"PER0
+cE'PZBfaeC'9QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9NC8C[E'4PFP"KG'J'!Xd
+!!riJ!Xrq(`Vq)!!%#R4[)#!0!Xm!!Qi!!!B!"Jm#d!,4$3,3!!)d!!!'#!B2rKi
+#dJVq(J!%#QCTE'80!Y)!!@d!!!B,"Ji#d``#d`!1!!K`Df0c-6)ZD!!#!!!0!Y%
+!!M3!!!B!"JMq(3,8#[iG!!3+BfC[E!d#e!!"E`!!"J3'"riF#riF!"3`!!KdC@e
+`F'&dD!!)G'9YF&"KG'J'rKm!!!)#b!!#!Y8#eJd#e3!#E!!#"KB'&[iErKS"rKX
+!!!(q'J!!!J,@!!)#e`,B$3,A!!*b!!!'&JBK!YN#fJd#f3!#BJ!!"KB'(3,E!Y`
+0!YX!!@m!!!B@"KRq'3[q'3!N-!!3Bh*jF(4[CQpXC'9bF'&dD!!3Bh*jF(4[4Qp
+XC'9b8'&dD!d#h!!"E3!!"KN'(!,G$!,G!!`!"MT`Df0c0`!#!!!0!YS!!@m!!!!
+!!!$q'![q'!!8-!!)G'9YF("KG'J!#(4PEA"3BA4S!J,B!!)#hJ,I$3,H!!0*!!)
+')JC-rKIq&J,J#[iA!"JZBfpbC@0bC@`U+LSU!!!!!!!!N!!!ER9XE!(q&J!!"J,
+J!!2q&3,K!Z)+rK8!"!TVEf0X$3,K!!&Y!!!'*JBTrK3+rK3!"!TKE'PK"J,L!!2
+q%`,M!Z3+rK-!"!TTER0S$3,M!!)d!!!',!BdrK)#j3Vq%J!%#Q0QEf`0!Z8!!@m
+!!!B`"M2q%3[q%3!d-!!BEh"PER0cE'PZBfaeC'9QEfaNCA*`BA4S!"K[F'9Z8e0
+-5@jME(9NC8C[E'4PFP"KG'J'!Z3!!ri3!ZEq$`Vq%!!%#R4[)#!0!ZB!!Qi!!!B
+h"NB#j`,S$3,R!!)d!!!'2`C'rJi#k3Vq$J!%#QCTE'80!ZN!!@d!!!C#"N8#kJ`
+#kJ!0!!G`Df0c0bjS!!)!!!d#k!!#0!!!"MF'2ri0!ZX+rJd!"!TMCQpX$3,V!!&
+[!!!'1`BqrJ`,rJ`!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!Eq$`!!!J,I!!)#l!,
+Y$3,X!!*X!!)'63C0rJ[q#J(q#`!!!Ii+!!!#!Zd!!J,Z!Zm0!Zi!!R)!!!C0"PJ
+#m!,a$3,`!!*L!!!'63C8![)#m`d#mJ!"E`!!"Nd'82i*#ri*!#3`!""MFRP`G'p
+QEfaNCA*`BA4S!""MFRP`G'p'EfaNCA*3BA4S$3,c!!&Y!!!'8!C6![3-![3!#`!
+&1R*KEQ3!!J!!$3,a!!&[!!!!!!!!rJJ,rJJ!&$!!#(4PEA"`BA4S!!KdC@e`8'&
+dD!)#l`!#![8#pJd#p3!$53!#"PN'Jri(rJB#p`Vq"`!B,Q0[FQ9MFQ9X+LSU+J!
+!!!!!!*!!!'jeE'`"rJB!!!B#p`!$rJ8#q!,j#[i&!!3+DfpME!d#q!!"E3!!"Pd
+'B2i%#[i%!!3+B@aTB3B#q3!$rJ-#qJ,l#[i$!!3+D@jcD!d#qJ!#0!!!"Q-'Dri
+#![`+rJ)!"!TMCQpX$3,m!!&[!!!'C`CUrJ%,rJ%!0$!!''p`C@jcFfaTEQ0XG@4
+PCQpXC'9bF'&dD!!BEh"PEP066%PZBfaeC'9'EfaNCA*3BA4S"J,l!!2q!!,prIm
++rJ!!"!TdEb!J$3,p!!*Z!!!'EJCp![i#r`d#rJ!#0!!!"RB'IIhq!`!+rIi!"!T
+QD@aP$3-!!!&Y!!!'H3Cm!`%-!`%!$!!'FQ&ZC#jS!!)!!!d#r`!#0!!!"Qi'G[h
+p!`)+rId!"!TMCQpX$3-#!!&[!!!'FJCerI`,rI`!&$!!#(4PEA"`BA4S!!KdC@e
+`8'&dD!Epr`!!!J,f!!)$!`-%$3-$!!*X!!)'K!D%rI[pqJ(pq`!!!Ihk!!!#!`3
+!!J-&!`B0!`8!!R)!!!D%"Sm$"`-)$3-(!!*L!!!'K!D,!`N$#Jd$#3!"E`!!"S3
+'Krhj#rhj!#3`!""MFRP`G'pQEfaNCA*`BA4S!""MFRP`G'p'EfaNCA*3BA4S$3-
++!!&Y!!!'K`D+!`X-!`X!#J!%1R*M-J!#!!!0!`J!!@m!!!!!!!$pq![pq!!8-!!
+)G'9YF("KG'J!#(4PEA"3BA4S!J-'!!)$$!-0$3--!!0*!!)'N!!'Z[hhrIB$$JV
+pp`!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'jeE'`"rIB!!!B$$J!$rI8$$`-3#[h
+e!!3+DfpME!d$$`!"E3!!"T3'Prhd#[hd!!3+B@aTB3B$%!!$rI-$%3-5#[hc!!3
++D@jcD!d$%3!#0!!!"TS'S[hb!a-+rI)!"!TMCQpX$3-6!!&[!!!'RJDKrI%,rI%
+!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&dD!!BEh"PEP066%PZBfaeC'9'Efa
+NCA*3BA4S"J-5!!2pm!-8rHm+rI!!"!TdEb!J$3-8!!*Z!!!'T3Dd!a8$&Jd$&3!
+#0!!!"Ud'Y2hZ!aF+rHi!"!TQD@aP$3-A!!&Y!!!'X!Dc!aJ-!aJ!#`!&FQ-b,QJ
+!!J!!$3-@!!)d!!!'T3DYrHd$'3Vpl3!%#Q0QEf`0!aN!!@m!!!DT"Ucpl![pl!!
+8-!!)G'9YF("KG'J!#(4PEA"3BA4S"[h[!!!#!`d!!J-D!aX0!aS!!Q`!!JDl"V[
+pkrhU!IhV!!!"rHS!!!)$'`!#!a`$(3d$(!!#FJ!!"VX'aJ-H!am0!ai!!Q)!!!D
+l"X)$)!-K$3-J!!&[!!!'Z`DqrHN,rHN!*$!!%'0bHA"dEfC[E'4PFR"KG'J!%'0
+bHA"dEdC[E'4PFP"KG'J0!b%!!@d!!!Dq"X%$)J`$)J!+!!3kFQ-d!!)!!!d$(`!
+"E`!!!!!!!2hS#rhS!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J#!ad!!J-M!b30!b-
+!!dN!!JE("[(pjrhQ!b8+rHF!'#jMEh*PBh*PE#SU+LS!!!!!!!#3!!"ZG@aX!Ih
+Q!!!'!b8!!rhP!bB$*`Vpj3!%#QY[Bf`0!bB!!@d!!!E,"Xlpj!Vpj!!%#Q&XD@%
+'!bF!!rhM!bJ$+3Vpi`!%#QPZFfJ0!bJ!!M3!!!E4"YRpiJ-U#[hL!!3+BfC[E!d
+$+J!"E`!!"Y8'f2hK#rhK!$3`!"K[F'9ZFh0XD@jME(9NC@C[E'4PFR"KG'J!''p
+`C@j68da*EQ0XG@4P4QpXC'9b8'&dD!B$+3!$rH!$+rhI#[hJ!!3+G'mJ)!d$+`!
+#EJ!!"Y`'k`-X!bd0!b`!!M3!!!EN"Z[phJ-Z#[hH!!3+CQPXC3d$,J!"E3!!"ZF
+'kJ-[$!-[!!X!"A*M0#jS!!)!!!d$,3!#0!!!"Y`'j2hG!c!+rGd!"!TMCQpX$3-
+`!!&[!!!'i!EMrG`,rG`!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!Eph`!!!J-N!!)
+$-3-b$3-a!!*X!!)'mJEbrG[pfJ(pf`!!!IhD!!!#!c)!!J-c!c30!c-!!R)!!!E
+b"[d$03-f$3-e!!*L!!!'mJEj!cF$1!d$0`!"E`!!"[)'pIhC#rhC!#3`!""MFRP
+`G'pQEfaNCA*`BA4S!""MFRP`G'p'EfaNCA*3BA4S$3-i!!&Y!!!'p3Ei!cN-!cN
+!#J!%1R*M03!#!!!0!cB!!@m!!!!!!!$pf![pf!!8-!!)G'9YF("KG'J!#(4PEA"
+3BA4S!J-d!!)$1J-l$3-k!!0*!!)'rJFSrGIpeJ-m#[hA!"JZBfpbC@0bC@`U+LS
+U!!!!!!!!N!!!ER9XE!(peJ!!"J-m!!2pe3-p!ci+rG8!"!TVEf0X$3-p!!&Y!!!
+(!JF&rG3+rG3!"!TKE'PK"J-q!!2pd`-r!d!+rG-!"!TTER0S$3-r!!)d!!!(#!F
+3rG)$33VpdJ!%#Q0QEf`0!d%!!@m!!!F-"`rpd3[pd3!d-!!BEh"PER0cE'PZBfa
+eC'9QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9NC8C[E'4PFP"KG'J'!d!!!rh3!d,
+pc`Vpd!!%#R4[)#!0!d)!!Qi!!!F6"b)$3`0%$30$!!)d!!!('`FLrFi$43VpcJ!
+%#QCTE'80!d8!!@d!!!FH"b%$4J`$4J!,!!9bBc8ZD!!#!!!0!d3!!M3!!!F6"a[
+pc30(#[h0!!3+BfC[E!d$4`!"E`!!"aF('[h-#rh-!"3`!!KdC@e`F'&dD!!)G'9
+YF&"KG'J'rFm!!!)$1`!#!dJ$53d$5!!#E!!#"bN(+Ih,rFS"rFX!!!(pbJ!!!J0
+*!!)$5J0,$30+!!*b!!!(+3Fd!d`$63d$6!!#BJ!!"bN(-!01!dm0!di!!@m!!!F
+T"bcpb3[pb3!N-!!3Bh*jF(4[CQpXC'9bF'&dD!!3Bh*jF(4[4QpXC'9b8'&dD!d
+$6`!"E3!!"b`(,`03$!03!!d!"cTbDA"PE@3!!J!!$300!!&[!!!!!!!!rFJ,rFJ
+!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!)$5`!#!e%$8Jd$83!$53!#"c8(Arh(rFB
+$8`Vpa`!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'jeE'`"rFB!!!B$8`!$rF8$9!0
+9#[h&!!3+DfpME!d$9!!"E3!!"cN(22h%#[h%!!3+B@aTB3B$93!$rF-$9J0A#[h
+$!!3+D@jcD!d$9J!#0!!!"cm(4rh#!eJ+rF)!"!TMCQpX$30B!!&[!!!(3`G'rF%
+,rF%!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&dD!!BEh"PEP066%PZBfaeC'9
+'EfaNCA*3BA4S"J0A!!2p`!0CrEm+rF!!"!TdEb!J$30C!!*Z!!!(5JGC!eS$@`d
+$@J!#0!!!"e)(@Ifq!e`+rEi!"!TQD@aP$30F!!&Y!!!(93GB!ed-!ed!$J!)FQP
+`C@eN,QJ!!J!!$30E!!)d!!!(5JG5rEd$AJVp[3!%#Q0QEf`0!ei!!@m!!!G1"e(
+p[![p[!!8-!!)G'9YF("KG'J!#(4PEA"3BA4S"[fr!!!#!e)!!J0I!f!0!em!!Q`
+!!JGJ"f$pZrfk!Ifl!!!"rES!!!)$B!!#!f%$BJd$B3!#FJ!!"f!(D`0M!f30!f-
+!!Q)!!!GJ"fF$C30Q$30P!!&[!!!(B!GMrEN,rEN!*$!!%'0bHA"dEfC[E'4PFR"
+KG'J!%'0bHA"dEdC[E'4PFP"KG'J0!fB!!@d!!!GM"fB$C``$C`!+!!3kFR0K!!)
+!!!d$C!!"E`!!!!!!!2fi#rfi!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J#!f)!!J0
+S!fN0!fJ!!dN!!JGX"jEpYrff!fS+rEF!'#jMEh*PBh*PE#SU+LS!!!!!!!#3!!"
+ZG@aX!Iff!!!'!fS!!rfe!fX$E!VpY3!%#QY[Bf`0!fX!!@d!!!G`"h2pY!VpY!!
+%#Q&XD@%'!f`!!rfc!fd$EJVpX`!%#QPZFfJ0!fd!!M3!!!Gf"hlpXJ0[#[fb!!3
++BfC[E!d$E`!"E`!!"hS(IIfa#rfa!$3`!"K[F'9ZFh0XD@jME(9NC@C[E'4PFR"
+KG'J!''p`C@j68da*EQ0XG@4P4QpXC'9b8'&dD!B$EJ!$rE!$F2f[#[f`!!3+G'm
+J)!d$F!!#EJ!!"i%(N!!$F30b$30a!!)d!!!(L3H3!2fZ!h-+rDi!"!TQD@aP$30
+c!!&Y!!!(M!H2!h3-!h3!#`!&FR0K,QJ!!J!!$30b!!)d!!!(J3H*rDd$G3VpV3!
+%#Q0QEf`0!h8!!@m!!!H&"iMpV![pV!!8-!!)G'9YF("KG'J!#(4PEA"3BA4S"[f
+[!!!#!fN!!J0f!hF0!hB!!Q`!!JHA"jIpUrfU!IfV!!!"rDS!!!)$G`!#!hJ$H3d
+$H!!#FJ!!"jF(SJ0k!hX0!hS!!Q)!!!HA"ji$I!0p$30m!!&[!!!(P`HDrDN,rDN
+!*$!!%'0bHA"dEfC[E'4PFR"KG'J!%'0bHA"dEdC[E'4PFP"KG'J0!hd!!@d!!!H
+D"jd$IJ`$IJ!-!!BkFh4KBfX!!J!!$30l!!&[!!!!!!!!rDJ,rDJ!&$!!#(4PEA"
+`BA4S!!KdC@e`8'&dD!)$H3!#!hm$J!d$I`!$53!#"k-(cIfRrDB$J3VpT`!B,Q0
+[FQ9MFQ9X+LSU+J!!!!!!!*!!!'jeE'`"rDB!!!B$J3!$rD8$JJ1$#[fP!!3+Dfp
+ME!d$JJ!"E3!!"kF(U[fN#[fN!!3+B@aTB3B$J`!$rD-$K!1&#[fM!!3+D@jcD!d
+$K!!#0!!!"kd(YIfL!iB+rD)!"!TMCQpX$31'!!&[!!!(X3HdrD%,rD%!0$!!''p
+`C@jcFfaTEQ0XG@4PCQpXC'9bF'&dD!!BEh"PEP066%PZBfaeC'9'EfaNCA*3BA4
+S"J1&!!2pS!1(rCm+rD!!"!TdEb!J$31(!!*Z!!!(Z!I(!iJ$L3d$L!!#0!!!"m!
+(arfH!iS+rCi!"!TQD@aP$31+!!&Y!!!(``I'!iX-!iX!$3!(Fh4KBfXZD!!#!!!
+0!iN!!M3!!!Hi"m$pR31-#[fG!!3+BfC[E!d$M!!"E`!!"l`([rfF#rfF!"3`!!K
+dC@e`F'&dD!!)G'9YF&"KG'J'rCm!!!)$J!!#!id$MJd$M3!$53!#"mi(q2fErCS
+$M`VpQ`!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'jeE'`"rCS!!!B$M`!$rCN$N!!
+$N3VpQ3!%#QY[Bf`0!j!!!!&Y!!!(dJI9rCJ+rCJ!"!TKE'PK"J14!!2pP`15!j-
++rCF!"!TTER0S$315!!)d!!!(f!IJrCB$P!VpPJ!%#Q0QEf`0!j3!!@m!!!IF"pr
+pP3[pP3!d-!!BEh"PER0cE'PZBfaeC'9QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9
+NC8C[E'4PFP"KG'J'!j-!!rf8!jApN`VpP!!%#R4[)#!0!j8!!Qi!!!IM"r)$PJ1
+A$31@!!)d!!!(k`IbrC)$Q!VpNJ!%#QCTE'80!jJ!!@d!!!IZ"r%$Q3`$Q3!4!!Y
+cB@CPFh4KBfXZD!!#!!!0!jF!!M3!!!IM"q[pN31D#[f4!!3+BfC[E!d$QJ!"E`!
+!"qF(k[f3!![pN!!!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!EpN`!!!J11!!)$Q`1
+F$31E!!*X!!)(q3IjrBrpMJ(pM`!!!If1!!!#!j`!!J1G!ji0!jd!!R)!!!Ij#!3
+$R`1J$31I!!*L!!!(q3J!!k%$SJd$S3!"E`!!"rN(r2f0#rf0!#3`!""MFRP`G'p
+QEfaNCA*`BA4S!""MFRP`G'p'EfaNCA*3BA4S$31L!!&Y!!!(r!Ir!k--!k-!#J!
+%1R0SB3!#!!!0!k!!!@m!!!!!!!$pM![pM!!8-!!)G'9YF("KG'J!#(4PEA"3BA4
+S!J1H!!)$T!1P$31N!!0*!!))"3J[rB[pLJ1Q#[f,!"JZBfpbC@0bC@`U+LSU!!!
+!!!!!N!!!ER9XE!(pLJ!!"J1Q!!2pL31R!kJ+rBN!"!TVEf0X$31R!!&Y!!!)#3J
+-rBJ+rBJ!"!TKE'PK"J1S!!2pK`1T!kS+rBF!"!TTER0S$31T!!)d!!!)$`JArBB
+$U`VpKJ!%#Q0QEf`0!kX!!@m!!!J6#"EpK3[pK3!d-!!BEh"PER0cE'PZBfaeC'9
+QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9NC8C[E'4PFP"KG'J'!kS!!rf%!kcpJ`V
+pK!!%#R4[)#!0!k`!!Qi!!!JD##N$V31Z$31Y!!)d!!!))JJTrB)$V`VpJJ!%#QC
+TE'80!km!!@d!!!JP##J$X!`$X!!,!!9cD'%ZD!!#!!!0!ki!!M3!!!JD##,pJ31
+a#[f"!!3+BfC[E!d$X3!"E`!!#"i))If!#rf!!"3`!!KdC@e`F'&dD!!)G'9YF&"
+KG'J'rB-!!!)$T3!#!l)$X`d$XJ!#E!!##$!)-2errAi"rAm!!!(pIJ!!!J1c!!)
+$Y!1e$31d!!*b!!!)-!Jl!lB$Y`d$YJ!#BJ!!#$!)0`1i!lN0!lJ!!@m!!!J`#$2
+pI3[pI3!N-!!3Bh*jF(4[CQpXC'9bF'&dD!!3Bh*jF(4[4QpXC'9b8'&dD!d$Z3!
+"E3!!#$-)0J1k$!1k!!d!"cTdH(4IC')!!J!!$31h!!&[!!!!!!!!rA`,rA`!&$!
+!#(4PEA"`BA4S!!KdC@e`8'&dD!)$Y3!#!lX$[!d$Z`!$53!##$`)C[elrAS$[3V
+pH`!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'jeE'`"rAS!!!B$[3!$rAN$[J1r#[e
+j!!3+DfpME!d$[J!"E3!!#%!)3rei#[ei!!3+B@aTB3B$[`!$rAF$`!2"#[eh!!3
++D@jcD!d$`!!#0!!!#%B)6[ef!m)+rAB!"!TMCQpX$32#!!&[!!!)5JK0rA8,rA8
+!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&dD!!BEh"PEP066%PZBfaeC'9'Efa
+NCA*3BA4S"J2"!!2pG!2$rA-+rA3!"!TdEb!J$32$!!*Z!!!)83KJ!m3$a3d$a!!
+#0!!!#&N)B2eb!mB+rA)!"!TQD@aP$32'!!&Y!!!)A!KI!mF-!mF!$J!)G(KdAf4
+L,QJ!!J!!$32&!!)d!!!)83KCrA%$b!VpF3!%#Q0QEf`0!mJ!!@m!!!K9#&MpF![
+pF!!8-!!)G'9YF("KG'J!#(4PEA"3BA4S"[ec!!!#!l`!!J2*!mS0!mN!!Q`!!JK
+R#'IpEreZ!Ie[!!!"r@i!!!)$bJ!#!mX$c!d$b`!#FJ!!#'F)FJ20!mi0!md!!Q)
+!!!KR#'i$c`23$322!!&[!!!)C`KUr@d,r@d!*$!!%'0bHA"dEfC[E'4PFR"KG'J
+!%'0bHA"dEdC[E'4PFP"KG'J0!p!!!@d!!!KU#'d$d3`$d3!,!!8kH$8`13!#!!!
+0!mi!!@m!!!!!!!$pE![pE!!8-!!)G'9YF("KG'J!#(4PEA"3BA4S!J2-!!)$dJ2
+6$325!!0*!!))F`LGr@[pDJ28#[eV!"JZBfpbC@0bC@`U+LSU!!!!!!!!N!!!ER9
+XE!(pDJ!!"J28!!2pD329!pB+r@N!"!TVEf0X$329!!&Y!!!)G`Kkr@J+r@J!"!T
+KE'PK"J2@!!2pC`2A!pJ+r@F!"!TTER0S$32A!!)d!!!)I3L&r@B$f3VpCJ!%#Q0
+QEf`0!pN!!@m!!!L"#)6pC3[pC3!d-!!BEh"PER0cE'PZBfaeC'9QEfaNCA*`BA4
+S!"K[F'9Z8e0-5@jME(9NC8C[E'4PFP"KG'J'!pJ!!reN!pVpB`VpC!!%#R4[)#!
+0!pS!!Qi!!!L)#*F$f`2F$32E!!)d!!!)N!!)PreL!pd+r@)!"!TQD@aP$32G!!&
+Y!!!)N`L@!pi-!pi!$!!'H$8`15jS!!)!!!d$h!!#0!!!#)J)N!$pB32I#[eK!!3
++BfC[E!d$h`!"E`!!#)`)MreJ#reJ!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J'r@-
+!!!)$d`!#!q!$i3d$i!!$53!##*i)b2eIr9i$iJVpA`!B,Q0[FQ9MFQ9X+LSU+J!
+!!!!!!*!!!'jeE'`"r9i!!!B$iJ!$r9d$i`2N#[eG!!3+DfpME!d$i`!"E3!!#+)
+)TIeF#[eF!!3+B@aTB3B$j!!$r9X$j32Q#[eE!!3+D@jcD!d$j3!#0!!!#+J)X2e
+D!qF+r9S!"!TMCQpX$32R!!&[!!!)V!L[r9N,r9N!0$!!''p`C@jcFfaTEQ0XG@4
+PCQpXC'9bF'&dD!!BEh"PEP066%PZBfaeC'9'EfaNCA*3BA4S"J2Q!!2p@!2Sr9F
++r9J!"!TdEb!J$32S!!*Z!!!)X`M#!qN$kJd$k3!#0!!!#,X)`[e@!qX+r9B!"!T
+QD@aP$32V!!&Y!!!)[JM"!q`-!q`!%!!+H$8`19pfCRNZD!!#!!!0!qS!!M3!!!L
+c#,[p932Y#[e9!!3+BfC[E!d$l3!"E`!!#,F)Z[e8#re8!"3`!!KdC@e`F'&dD!!
+)G'9YF&"KG'J'r9F!!!)$i3!#!qi$l`d$lJ!#E!!##-N)bIe6r9)"r9-!!!(p8J!
+!!J2[!!)$m!2a$32`!!*b!!!)b3M8!r)$m`d$mJ!#BJ!!#-N)d!2d!r80!r3!!@m
+!!!M*#-cp83[p83!N-!!3Bh*jF(4[CQpXC'9bF'&dD!!3Bh*jF(4[4QpXC'9b8'&
+dD!d$p3!"E3!!#-`)c`2f$!2f!!d!"cTi06!jGM-!!J!!$32c!!&[!!!!!!!!r9!
+,r9!!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!)$m3!#!rF$q!d$p`!$53!##08)rre
+2r8i$q3Vp6`!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'jeE'`"r8i!!!B$q3!$r8d
+$qJ2l#[e0!!3+DfpME!d$qJ!"E3!!#0N)h2e-#[e-!!3+B@aTB3B$q`!$r8X$r!2
+p#[e,!!3+D@jcD!d$r!!#0!!!#0m)jre+!ri+r8S!"!TMCQpX$32q!!&[!!!)i`M
+Qr8N,r8N!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&dD!!BEh"PEP066%PZBfa
+eC'9'EfaNCA*3BA4S"J2p!!2p5!2rr8F+r8J!"!TdEb!J$32r!!*Z!!!)kJMj"!!
+%!3d%!!!#0!!!#2))qIe'"!)+r8B!"!TQD@aP$33#!!&Y!!!)p3Mi"!--"!-!$J!
+)H$8`1ABc,QJ!!J!!$33"!!)d!!!)kJMbr88%"!Vp43!%#Q0QEf`0"!3!!@m!!!M
+Z#2(p4![p4!!8-!!)G'9YF("KG'J!#(4PEA"3BA4S"[e(!!!#!rJ!!J3&"!B0"!8
+!!Q`!!JN!#3$p3re#!Ie$!!!"r8)!!!)%"J!#"!F%#!d%"`!$53!##3!*+[e"r8!
+%#3Vp33!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'jeE'`"r8!!!!B%#3!$r6m%#J3
+,#[dr!!3+DfpME!d%#J!"E3!!#33*"rdq#[dq!!3+B@aTB3B%#`!$r6d%$!30#[d
+p!!3+D@jcD!d%$!!#0!!!#3S*%[dm"!i+r6`!"!TMCQpX$331!!&[!!!*$JN4r6X
+,r6X!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&dD!!BEh"PEP066%PZBfaeC'9
+'EfaNCA*3BA4S"J30!!2p1J32r6N+r6S!"!TdEb!J$332!!*Z!!!*&3NN""!%%3d
+%%!!#0!!!#4d**2di"")+r6J!"!TQD@aP$335!!&Y!!!*)!NM""--""-!#`!&Fh0
+X,QJ!!J!!$334!!)d!!!*&3NGr6F%&!Vp0`!%#Q0QEf`0""3!!@m!!!NC#4cp0J[
+p0J!H-!!0Fh0XCQpXC'9bF'&dD!!0Fh0X4QpXC'9b8'&dD!Ep13!!!J3)!!)%&33
+@$339!!0*!!)*+`P9r6Ap0!3A#[de!"JZBfpbC@0bC@`U+LSU!!!!!!!!N!!!ER9
+XE!(p0!!!"J3A!!2p-`3B""N+r6-!"!TVEf0X$33B!!&Y!!!*,`Nbr6)+r6)!"!T
+KE'PK"J3C!!2p-33D""X+r6%!"!TTER0S$33D!!)d!!!*03Npr6!%(!Vp-!!%#Q0
+QEf`0""`!!@m!!!Nj#6cp,`[p,`!d-!!BEh"PER0cE'PZBfaeC'9QEfaNCA*`BA4
+S!"K[F'9Z8e0-5@jME(9NC8C[E'4PFP"KG'J'""X!!rdZ""hp,3Vp,J!%#R4[)#!
+0""d!!Qi!!!P!#8m%(J3I$33H!!)d!!!*5!P2r5`%)!Vp,!!%#QCTE'80"#!!!@d
+!!!P,#8i%)3`%)3!-!!CcFf`b,QJ!!J!!$33I!!)d!!!*3!P)r5X%)JVp+`!%#Q0
+QEf`0"#)!!@m!!!P%#8Ip+J[p+J!H-!!0Fh0XCQpXC'9bF'&dD!!0Fh0X4QpXC'9
+b8'&dD!Ep,3!!!J3@!!)%)`3N$33M!!0*!!)*9JQ!r5Rp+!3P#[dT!"JZBfpbC@0
+bC@`U+LSU!!!!!!!!N!!!ER9XE!(p+!!!"J3P!!2p*`3Q"#F+r5F!"!TVEf0X$33
+Q!!&Y!!!*@JPGr5B+r5B!"!TKE'PK"J3R!!2p*33S"#N+r58!"!TTER0S$33S!!)
+d!!!*B!PSr53%+JVp*!!%#Q0QEf`0"#S!!@m!!!PN#@Ip)`[p)`!d-!!BEh"PER0
+cE'PZBfaeC'9QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9NC8C[E'4PFP"KG'J'"#N
+!!rdL"#[p)3Vp)J!%#R4[)#!0"#X!!Qi!!!PV#AS%,!3Y$33X!!)d!!!*F`Pkr5!
+%,JVp)!!%#QCTE'80"#i!!@d!!!Pf#AN%,``%,`!0!!GcFf`b-bjS!!)!!!d%,3!
+#0!!!#@X*FrdI"$!+r4m!"!TMCQpX$33`!!&[!!!*E`Pbr4i,r4i!(M!!$A0cE'C
+[E'4PFR"KG'J!$A0cE%C[E'4PFP"KG'J'r5%!!!)%*!!#"$%%-Jd%-3!$53!##B%
+*UrdGr4`%-`Vp(3!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'jeE'`"r4`!!!B%-`!
+$r4X%0!3e#[dE!!3+DfpME!d%0!!"E3!!#B8*L2dD#[dD!!3+B@aTB3B%03!$r4N
+%0J3h#[dC!!3+D@jcD!d%0J!#0!!!#BX*NrdB"$J+r4J!"!TMCQpX$33i!!&[!!!
+*M`Q5r4F,r4F!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&dD!!BEh"PEP066%P
+ZBfaeC'9'EfaNCA*3BA4S"J3h!!2p&J3jr48+r4B!"!TdEb!J$33j!!*Z!!!*PJQ
+P"$S%1`d%1J!#0!!!#Ci*TId8"$`+r43!"!TQD@aP$33m!!&Y!!!*S3QN"$d-"$d
+!$!!'Fh0X-bjS!!)!!!d%1`!#0!!!#CB*R[d6"$i+r4-!"!TMCQpX$33q!!&[!!!
+*QJQGr4),r4)!(M!!$A0cE'C[E'4PFR"KG'J!$A0cE%C[E'4PFP"KG'J'r48!!!)
+%-J!#"$m%3!d%2`!$53!##D`*e[d4r4!%33Vp%3!B,Q0[FQ9MFQ9X+LSU+J!!!!!
+!!*!!!'jeE'`"r4!!!!B%33!$r3m%3J4$#[d2!!3+DfpME!d%3J!"E3!!#E!*Xrd
+1#[d1!!3+B@aTB3B%3`!$r3d%4!4&#[d0!!3+D@jcD!d%4!!#0!!!#EB*[[d-"%B
++r3`!"!TMCQpX$34'!!&[!!!*ZJQpr3X,r3X!0$!!''p`C@jcFfaTEQ0XG@4PCQp
+XC'9bF'&dD!!BEh"PEP066%PZBfaeC'9'EfaNCA*3BA4S"J4&!!2p#J4(r3N+r3S
+!"!TdEb!J$34(!!*Z!!!*`3R3"%J%53d%5!!#0!!!#FN*d2d)"%S+r3J!"!TQD@a
+P$34+!!&Y!!!*c!R2"%X-"%X!$!!'G'ac-5jS!!)!!!d%53!#0!!!#F%*bId("%`
++r3F!"!TMCQpX$34-!!&[!!!*a3R)r3B,r3B!(M!!$A0cE'C[E'4PFR"KG'J!$A0
+cE%C[E'4PFP"KG'J'r3N!!!)%3!!#"%d%6Jd%63!#E!!##GF*erd&r33"r38!!!(
+p"!!!!J41!!)%6`43$342!!0*!!)*e`S"r32p!J44#[d$!"JZBfpbC@0bC@`U+LS
+U!!!!!!!!N!!!ER9XE!(p!J!!"J44!!2p!345"&-+r3%!"!TVEf0X$345!!&Y!!!
+*f`RHr3!+r3!!"!TKE'PK"J46!!2mr`48"&8+r2m!"!TTER0S$348!!)d!!!*i3R
+Tr2i%9JVmrJ!%#Q0QEf`0"&B!!@m!!!RP#HMmr3[mr3!d-!!BEh"PER0cE'PZBfa
+eC'9QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9NC8C[E'4PFP"KG'J'"&8!!rcm"&I
+mq`Vmr!!%#R4[)#!0"&F!!Qi!!!RX#IX%@!4C$34B!!)d!!!*p!Rlr2S%@JVmqJ!
+%#QCTE'80"&S!!@d!!!Rh#IS%@``%@`!1!!KMFRP`G'mZD!!#!!!0"&N!!M3!!!R
+X#I6mq34F#[cj!!3+BfC[E!d%A!!"E`!!#I!*mrci#rci!#3`!""MFRP`G'pQEfa
+NCA*`BA4S!""MFRP`G'p'EfaNCA*3BA4S"[cl!!!#"&!!!J4G"&i0"&d!!Q`!!JS
+##J,mprcf!Ich!!!"r2B!!!)%AJ!#"&m%B!d%A`!$53!##J)+,2cer23%B3Vmp3!
+B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'jeE'`"r23!!!B%B3!$r2-%BJ4M#[cc!!3
++DfpME!d%BJ!"E3!!#JB+#Icb#[cb!!3+B@aTB3B%B`!$r2%%C!4P#[ca!!3+D@j
+cD!d%C!!#0!!!#J`+&2c`"'B+r2!!"!TMCQpX$34Q!!&[!!!+%!S6r1m,r1m!0$!
+!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&dD!!BEh"PEP066%PZBfaeC'9'EfaNCA*
+3BA4S"J4P!!2mlJ4Rr1d+r1i!"!TdEb!J$34R!!*Z!!!+&`SQ"'J%D3d%D!!#0!!
+!#Km+*[cX"'S+r1`!"!TQD@aP$34U!!&Y!!!+)JSP"'X-"'X!%!!+Eh"PER0cE(B
+ZD!!#!!!0"'N!!M3!!!SA#Krmk`4X#[cV!!3+BfC[E!d%E!!"E`!!#KX+([cU#rc
+U!#3`!""MFRP`G'pQEfaNCA*`BA4S!""MFRP`G'p'EfaNCA*3BA4S"[cY!!!#"'!
+!!J4Y"'i0"'d!!dN!!JSY#PImkIcS"'m+r1N!'#jMEh*PBh*PE#SU+LS!!!!!!!#
+3!!"ZG@aX!IcS!!!'"'m!!rcR"(!%F3Vmj`!%#QY[Bf`0"(!!!@d!!!Sa#M6mjJV
+mjJ!%#Q&XD@%'"(%!!rcP"()%F`Vmj3!%#QPZFfJ0"()!!M3!!!Sh#Mrmj!4d#[c
+N!!3+BfC[E!d%G!!"E`!!#MX+2[cM#rcM!$3`!"K[F'9ZFh0XD@jME(9NC@C[E'4
+PFR"KG'J!''p`C@j68da*EQ0XG@4P4QpXC'9b8'&dD!B%F`!$r1)%GIcK#[cL!!3
++G'mJ)!d%G3!#EJ!!#N)+834f"(F0"(B!!M3!!!T+#P(mi!4i#[cJ!!3+CQPXC3d
+%H!!"E3!!#Nd+8!4j$!4j!!i!#(4YC'PQCLjS!!)!!!d%G`!#0!!!#N)+5[cI"(S
++r0m!"!TMCQpX$34k!!&[!!!+4JT*r0i,r0i!*$!!%'0bHA"dEfC[E'4PFR"KG'J
+!%'0bHA"dEdC[E'4PFP"KG'J'r1%!!!)%EJ!#"(X%I!d%H`!#E!!##PJ+@2cGr0`
+"r0d!!!(mh!!!!J4m!!)%I34q$34p!!*X!!)+@!TBr0[mfJ(mf`!!!IcD!!!#"(i
+!!J4r")!0"(m!!dN!!JTB#S,mfIcB")%+r0N!'#jMEh*PBh*PE#SU+LS!!!!!!!#
+3!!"ZG@aX!IcB!!!'")%!!rcA"))%J`Vme`!%#QY[Bf`0"))!!@d!!!TF#PrmeJV
+meJ!%#Q&XD@%'")-!!rc9")3%K3Vme3!%#QPZFfJ0")3!!M3!!!TL#QVme!5'#[c
+8!!3+BfC[E!d%KJ!"E`!!#QB+DIc6#rc6!$3`!"K[F'9ZFh0XD@jME(9NC@C[E'4
+PFR"KG'J!''p`C@j68da*EQ0XG@4P4QpXC'9b8'&dD!B%K3!$r0)%Krc4#[c5!!3
++G'mJ)!d%K`!#EJ!!#Qd+I!5)")N0")J!!M3!!!Te#Rcmd!5+#[c3!!3+CQPXC3d
+%LJ!"E3!!#RJ+H`5,$!5,!!`!"Q9IEh-ZD!!#!!!0")N!!M3!!!TY#RAmc`5-#[c
+2!!3+BfC[E!d%M!!"E`!!#R%+G2c1#rc1!#B`!"&[F'9ZFh0XCQpXC'9bF'&dD!!
+4Eh"PER0cE%C[E'4PFP"KG'J'r0%!!!)%J!!#")d%MJd%M3!$53!##S-+VIc0r-`
+%M`Vmc3!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'jeE'`"r-`!!!B%M`!$r-X%N!!
+%N3Vmb`!%#QY[Bf`0"*!!!!&Y!!!+K`U+r-S+r-S!"!TKE'PK"J54!!2mb355"*-
++r-N!"!TTER0S$355!!)d!!!+M3U9r-J%P!Vmb!!%#Q0QEf`0"*3!!@m!!!U4#T6
+ma`[ma`!d-!!BEh"PER0cE'PZBfaeC'9QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9
+NC8C[E'4PFP"KG'J'"*-!!rc'"*Ama3VmaJ!%#R4[)#!0"*8!!Qi!!!UB#UF%PJ5
+A$35@!!)d!!!+S!URr-3%Q!Vma!!%#QCTE'80"*J!!@d!!!UM#UB%Q3`%Q3!0!!G
+PAfpc-LjS!!)!!!d%P`!#0!!!#TJ+S2c$"*S+r--!"!TMCQpX$35D!!&[!!!+R!U
+Ir-),r-)!*M!!%@p`C@jcFfaQEfaNCA*`BA4S!"&[F'9ZFh0X4QpXC'9b8'&dD!E
+ma3!!!J51!!)%Qrc"$35E!!*X!!)+VJUZr-$m[`(m`!!!!Ibr!!!#r-%!!!d!#3!
+"E3!!!!!!!3!I!Irq!!!#!!B!!J5F"*d0"*`!!Q`!!J!!!!$m[[bp!Ibq!!!"r,d
+!!!)%R3!#"*i%R`d%RJ!#E!!##V%+b!5Jr,`0"+!!!dN!!JUa#XMmZ`5K"+)+r,X
+!'#jcHA0[C'a[Cf&cDh)!!!!!!!!!!&4&@&30"+%!!@d!!!Ua#V3%S``%S`!'!!!
+!!J!!"J5L!!2mZJ5N"+8+r,S!"!TLG'jc$35N!!&+!!!+Y`Um"+B#"+B!!J5Rr,N
+0"+F!!@d!!!Uh#VS%U!`%U!!+!!4%EfjP!!)!!!,mZ3!!"J5P!!2mZ!5Tr,F+r,J
+!"!TRDACe$35T!!&Y!!!+[`V#r,B$r,B!"3EmY`!!!Ibm!!!#"*m!!J5Ur,80"+S
+!!Q`!!J!!!!$mY2bc!Ibd!!!"r,-!!!,mY3!!$J!#!!!2%!!$!",mXJ5V"+`%V35
+Z"+m%X!5a",)%X`5d",8%YJ5hr,(mX2b[r+i"r,)!!"!%U`!3r+hmV2bVr+VmUIb
+Sr+ImT[bPr+6mSrbLr+(mS2bIr*i+r+d!'#jKCACdEf&`F'jeE'`!!)!!!!#3!!!
+U+LSU#rbX!")`!!GdD'9`BA4S!!GdD'93BA4S#rbV!"``!!adD'9[E'4NC@aTEA-
+!$(4SC8pXC%4PE'PYF`[mUJ!J-!!1G'KPF(*[DQ9MG("KG'J!$R4SC9"bEfTPBh4
+3BA4S#rbT!"B`!!PdD'9YCA"KG'J!#A4SC8eP8'&dD![mU!!Q-!!4D@jME(9NC@C
+[E'4PFR"KG'J!%@PZBfaeC'9'EfaNCA*3BA4S#rbR!$3`!"K[F'9ZFh0XD@jME(9
+NC@C[E'4PFR"KG'J!''p`C@j68da*EQ0XG@4P4QpXC'9b8'&dD![mTJ!N-!!3Bh*
+jF(4[CQpXC'9bF'&dD!!3Bh*jF(4[4QpXC'9b8'&dD![mT3!H-!!0Fh0XCQpXC'9
+bF'&dD!!0Fh0X4QpXC'9b8'&dD![mT!!Q-!!4Eh"PER0cE'C[E'4PFR"KG'J!%@p
+`C@jcFfa'EfaNCA*3BA4S#rbM!#i`!"9dD'9ZCAGQEfaNCA*bC@CPFQ9ZBf8!&A4
+SC8jPGdC[E'4PFP*PCQ9bC@jMC3[mSJ!8-!!)G'9YF("KG'J!#(4PEA"3BA4S!Ib
+K!!!"r+!!!!(mR`!!!IbH!!!1"+`!"a$mR35ir*cmQ`5j",VmQJVmR3!B,Q&PGR4
+[BA"`ER9XE!!!J!!!!*!!!#SU+LS0",J!!@X!!!!!#XJ%Z`)%Z`!#!!8%[!)%[!!
+#"*lmQ3,mQ3!!!IbF!!!#r*X!!"!%Z3!!%!5k!)B!(rbBr*ImP[b9r*6mNrb5!#c
+mNIb3!2b2r)lmMIb-!%rmL`"D!&[mLJ"Nr)N!EIb)r)ImKJ#2r)AmK2b$r),mJIb
+!r(rmI[apr(cmH`#Tr(VmHIair(F![Iaf!-ImG3$8!1)!l!$j!3-"%!%D!5F"-3%
+q!8J"93&I!@`"GJ'$!Bd"QJ'N!E%"Z`()!G)"h`(T!IB#!!)0!KF#*!)Z!MX#43*
+5!P`#D3*c!S!#LJ+A!U%#VJ+m!XB#d`,G!ZS#p!-"!`X$'!-L!bm$130'!e!$A30
+R!h3$IJ1,!jN$S`1`!lS$a`24!pi$l!2f"!-%%`3K"#m%234,"&X%D`4j")X%Q35
+Mr(3%U2acr(,mF3VmQ!!%#Q0[BQS+r*F!'#jPBA*cCQCNFQ&XDA-!!!!!!!!J!'&
+QC()+r*B!"!TMG(Kd#rb9!")`!!GdD'9`BA4S!!GdD'93BA4S#[b8!!3+BA0MFJV
+mN`!%#R4iC'`,r*)!($!!$(4SC@pXC'4PE'PYF`!-G'KP6faN4'9XD@ec#[b4!!3
++BfPdE32mN!$rr3[mM`!J-!!1G'KPF(*[DQ9MG("KG'J!$R4SC9"bEfTPBh43BA4
+S!rb1rri+r)d!"!T849K8#rb-!"B`!!PdD'9YCA"KG'J!#A4SC8eP8'&dD![mL`!
+Q-!!4D@jME(9NC@C[E'4PFR"KG'J!%@PZBfaeC'9'EfaNCA*3BA4S#rb+!$3`!"K
+[F'9ZFh0XD@jME(9NC@C[E'4PFR"KG'J!''p`C@j68da*EQ0XG@4P4QpXC'9b8'&
+dD![mL3!N-!!3Bh*jF(4[CQpXC'9bF'&dD!!3Bh*jF(4[4QpXC'9b8'&dD![mL!!
+H-!!0Fh0XCQpXC'9bF'&dD!!0Fh0X4QpXC'9b8'&dD![mK`!Q-!!4Eh"PER0cE'C
+[E'4PFR"KG'J!%@p`C@jcFfa'EfaNCA*3BA4S#[b'!!3+BfC[E!VmK3!B,QeTFf0
+cE'0d+LSU+J!!!!!!!*!!!#SU+LS+r)3!"!TcC@aP#[b$!"JZBfpbC@4PE'mU+LS
+U!!!!!!!!N!!!+LSU+J(mJJ!!![b"!!!+r)!!"!TVEf0X#[ar!!3+D@jcD!2mIJ!
+%#[ap!"JZBfpbC@0bC@`U+LSU!!!!!!!!N!!!ER9XE!VmI!!%#R*cE(3,r(X!,M!
+!&A4SC@jPGfC[E'4PFR*PCQ9bC@jMC3!9G'KP6Q9h4QpXC'9b8Q9QCA*PEQ0P#[a
+k!!3+F'jKE3VmH3!%#Q&XD@%+r(J!"!TdEb!J#[ah!!3+CQPXC32mGJ!'#rae!"3
+`!!KdC@e`F'&dD!!)G'9YF&"KG'J+r(3!"!TLG'jc#[ac!!3+CfPfG32mFJ!&#[a
+a!"JZFhPcEf4XEfGKFfYb!!!!!!!!!!"849K8%IbD#XRJ%JUYi1%TDJ`!!LrM*N9
+4e%r&jLa&edrSaHBX4Nr%@qPF@eTVA&VU-NAE6m4Ek9aE@QYF@Z`bl5C&hNr,lbA
+Y*N9J!""2bf%!%59K!")Pl5C&B!!66mYK!"3Pl5C&B!!96mYK!"BPl5C&B!!A6m[
+Y*N9J!"K2amAQ,%C2&!!L+Q%!'9m!%#pK!"PK!"S[DJ`!'dmUB3!F,'S-!"eA!!K
+B!"i!(fK2+Q%!)'%!'@%!)5TK!"PI!"![B3!L$!!M6em!*%9J!#92A`!PDJ`!'dp
+K!#BUB3!F,'%!*ba'6bTK!#"K!#KK!#%UB3!CA`!6,f%!+5TK!"R1,f%!+Q%!+bp
+K!#`-!#02A`!9B3!Y*89J!#j2+Q%!)'%!+'%!)5TK!"PI!"-[B3!T+Q%!'9m!,Lp
+K!#TK!#m[B3!X$!!M6bTK!#"K!#KK!#%UB3!CA`!6,f%!+5TK!"PI!#i[B3!UB3!
+`,f%!,!`!)dpI!"9K!$%P4@!!,NmUB3!JB3!SB3!K+Q%!'9m!%bpK!#NUB3!CA`!
+Z,f%!+Q%!-LpK!#`-!#02A`!9B3!c*89J!#j2+Q%!)'%!+'%!)5TK!"PI!"-[B3!
+T+Q%!'9m!,LpK!#TK!$3[B3!X$!!M6em!&@%!059&B!!Z6bTK!#"K!#KK!#%UB3!
+CA`!6,f%!+5TK!"PI!#i[B3!UB3!f,f%!,!`!)dpI!"9K!$FP4@!!,NmUB3!JB3!
+SB3!K+Q%!'9m!%bpK!#NUB3!CA`!Z,f%!+Q%!1#pK!#`-!#02A`!9B3!j*89J!#j
+2+Q%!)'%!+'%!)5TK!"PI!"-[B3!T+Q%!'9m!,LpK!#TK!$S[B3!X$!!M6em!&@%
+!1b9&B!!Z6bTK!#"K!#KK!#%UB3!CA`!6,f%!+5TK!"PI!#i[B3!UB3!m,f%!,!`
+!)dpI!"9K!$dP4@!!,NmUB3!JB3!SB3!K+Q%!'9m!%bpK!#NUB3!CA`!Z,f%!+Q%
+!2LpK!#`-!#02A`!9B3!r*89J!#j2+Q%!)'%!+'%!)5TK!"PI!"-[B3!T+Q%!'9m
+!,LpK!#TK!%![B3!X$!!M6em!&@%!359&B!!Z6bTK!#"K!#KK!#%UB3!CA`!6,f%
+!+5TK!"PI!#i[B3!UB3"#,f%!,!`!)dpI!"9K!%-P4@!!,NmUB3!JB3!SB3!K+Q%
+!'9m!%bpK!#NUB3!CA`!Z,f%!+Q%!4#pK!#`-!#02A`!9B3"&*89J!#j2+Q%!)'%
+!+'%!)5TK!"PI!"-[B3!T+Q%!'9m!,LpK!#TK!%B[B3!X$!!M6em!&@%!4b9&B!!
+Z6bTK!#"K!#KK!#%UB3!CA`!6,f%!+5TK!"PI!#i[B3!UB3"),f%!,!`!)dpI!"9
+K!%NP4@!!,NmUB3!JB3!SB3!K+Q%!'9m!%bpK!#NUB3!CA`!Z,f%!+Q%!5LpK!#`
+-!#02A`!9B3",*89J!#j2+Q%!)'%!+'%!)5TK!"PI!"-[B3!T+Q%!'9m!,LpK!#T
+K!%`[B3!X$!!M6em!&@%!659&B!!Z6bTK!#"K!#KK!#%UB3!CA`!6,f%!+5TK!"P
+I!#i[B3!UB3"1,f%!,!`!)dpI!"9K!%mP4@!!,NmUB3!JB3!SB3!K+Q%!'9m!%bp
+K!#NUB3!CA`!Z,f%!+Q%!8#pK!#`-!#02A`!9B3"4*89J!#j2+Q%!)'%!+'%!)5T
+K!"PI!"-[B3!T+Q%!'9m!,LpK!#TK!&)[B3!X$!!M6em!&@%!8b9&B!!Z6bTK!#"
+K!#KK!#%UB3!CA`!6,f%!+5TK!"PI!#i[B3!UB3"8,f%!,!`!)dpI!"9K!&8P4@!
+!,NmUB3!JB3!SB3!K+Q%!'9m!%bpK!#NUB3!CA`!Z,f%!+Q%!9LpK!#`-!#02A`!
+9B3"A*89J!#j2+Q%!)'%!+'%!)5TK!"PI!"-[B3!T+Q%!'9m!,LpK!#TK!&J[B3!
+X$!!M6bTK!#"K!#KK!#%UB3!CA`!6,f%!+5TK!"PI!#i[B3!UB3"C,f%!,!`!)dp
+I!"9K!&SP4@!!,NmUB3!JB3!SB3!K+Q%!'9m!%bpK!#NUB3!CA`!Z,f%!+Q%!@bp
+K!#`-!#02A`!9B3"F*89J!#j2+Q%!)'%!+'%!)5TK!"PI!"-[B3!T+Q%!'9m!,Lp
+K!#TK!&d[B3!X$!!M6em!&@%!AL9&B!!Z6bTK!#"K!#KK!#%UB3!CA`!6,f%!+5T
+K!"PI!#i[B3!UB3"I,f%!,!`!)dpI!"9K!'!P4@!!,NmUB3!JB3!SB3!K+Q%!'9m
+!%bpK!#NUB3!CA`!Z,f%!+Q%!B5pK!#`-!#02A`!9B3"L*89J!#j2+Q%!)'%!+'%
+!)5TK!"PI!"-[B3!T+Q%!'9m!,LpK!#TK!'-[B3!X$!!M6em!&@%!C#9&B!!Z6bT
+K!#"K!#KK!#%UB3!CA`!6,f%!+5TK!"PI!#i[B3!UB3"P,f%!,!`!)dpI!"9K!'B
+P4@!!,NmUB3!JB3!SB3!K+Q%!'9m!%bpK!#NUB3!CA`!Z,f%!+Q%!CbpK!#`-!#0
+2A`!9B3"S*89J!#j2+Q%!)'%!+'%!)5TK!"PI!"-[B3!T+Q%!'9m!,LpK!#TK!'N
+[B3!X$!!M6em!&@%!DL9&B!!Z6bTK!#"K!#KK!#%UB3!CA`!6,f%!+5TK!"PI!#i
+[B3!UB3"V,f%!,!`!)dmUB3!JB3!SB3!K+Q%!'9m!%bpK!#NUB3!CA`!Z,f%!+Q%
+!E#pK!#`-!#02A`!9B3"Y*89J!#j2+Q%!)'%!+'%!)5TK!"PI!"-[B3!T+Q%!'9m
+!,LpK!#TK!'i[B3!X$!!M6em!&@%!Eb9&B!!Z6bTK!#"K!#KK!#%UB3!CA`!6,f%
+!+5TK!"PI!#i[B3!UB3"`,f%!,!`!)dpI!"9K!(%P4@!!,NmUB3!JB3!SB3!K+Q%
+!'9m!%bpK!#NUB3!CA`!Z,f%!+Q%!FLpK!#`-!#02+Q%!)'%!+'%!)5TK!"PI!"-
+[B3!T+Q%!'9m!,LpK!#TK!(-[B3!X$!!M6em!&@%!G#9&B!!Z6bTK!#"K!#KK!#%
+UB3!CA`!6,f%!+5TK!"PI!#i[B3!UB3"e,f%!,!`!)dmUB3!JB3!SB3!K+Q%!'9m
+!%bpK!#NUB3!CA`!A,f%!+Q%!GLpK!#`-!#02+Q%!)'%!+'%!)5TK!"PI!"-[B3!
+T+Q%!'9m!&bpK!#TK!(F[B3!X$!!M6bTK!#"K!#KK!#%UB3!CA`!6,f%!+5TK!"P
+I!"F[B3!UB3"i,f%!,!`!)dmUB3!JB3!SB3!K+Q%!'9m!%bpK!#NUB3!CA`!A,f%
+!+Q%!H5pK!#`-!#02+Q%!)'%!+'%!)5TK!"PI!"-[B3!T+Q%!'9m!&bpK!#TK!(S
+[B3!X$!!M6bTK!#"K!#KK!#%UB3!CA`!6,f%!+5TK!"PI!"8[B3!UB3"l,f%!,!`
+!)dmUB3!JB3!SB3!K+Q%!'9m!%bpK!#NUB3!CA`!9,f%!+Q%!I#pK!#`-!#02+Q%
+!)'%!+'%!)5TK!"PI!"-[B3!T+Q%!'9m!&5pK!#TK!(d[B3!X$!!M6bTK!#"K!#K
+K!#%UB3!CA`!6,f%!+5TK!"PI!"J[B3!UB3"q,f%!,!`!)dmUB3!JB3!SB3!K+Q%
+!'9m!%bpK!#NUB3!CA`!B,f%!+Q%!IbpK!#`-!#028&92B3#!B3#"B3##DhCK!)0
+K!)4K!#)-!)82$!5Y!&%!5deKBfPZG'pcD#")4$T%CA0VG'p`)%C[E'4PFMT*EQ0
+[E@PZCcT[F'9ZFh0X,90139!Y-6Nj16%b-6%k6@&M6e-kE@YXD@jVFbjKF`!#!!!
+1"+i!!J6mF!5p!ra`!!%1",d!!3!%[J`%[J!'!!!!!J!!$J5[!!)%r'm%[`2mE`!
+%$J5r!!3!"-!%`36#"---"-!!%J!-6@&MD@jdEh0S)%K%!!)!!!`%`3!8!!j%CA0
+VG'p`)%C[E'4PFJ!#!!!-"-)!$J!)5@jMEfeTEQF!!J!!$!6$!"X!&@p`C@jcFf`
+Y8dj"8#da16Nj-6)a-3!#!!!-",!!4J"!6@&MD@jdEh0S)%K%1N4PFfYdEh!J4Qp
+XC'9b1NPZBfpYD@jR1Qp`C@jcFf`Y8dj"8#da16Nj-6)a-6T0B@028`!#!!!-",%
+!5!"#6@&MD@jdEh0S)%K%1N4PFfYdEh!J4QpXC'9b1NPZBfpYD@jR1Qp`C@jcFf`
+Y8dj"8#da16Nj-6)a-6TTEQ0XG@4P!!)!!!`%XJ"3!%T0B@0TER4[FfJJ5%3k4'9
+cDh4[F#"'EfaNCA)k5@jMEfeTEQFkEh"PER0cE#e66N&3,6%j16Na-M%a1QPZBfa
+eC'8kEh"PER0cE!!#!!!-",-!4`""6@&MD@jdEh0S)%K%1N4PFfYdEh!J4QpXC'9
+b1NPZBfpYD@jR1Qp`C@jcFf`Y8dj"8#da16Nj-6)a-6TMFRP`G'm!!J!!$!5d!%3
+!2NeKBfPZG'pcD#")4$T%CA0VG'p`)%C[E'4PFMT*EQ0[E@PZCcT[F'9ZFh0X,90
+139!Y-6Nj16%b-6%kFh0X!!)!!!`%Y3"!!$T0B@0TER4[FfJJ5%3k4'9cDh4[F#"
+'EfaNCA)k5@jMEfeTEQFkEh"PER0cE#e66N&3,6%j16Na-M%a!!)!!!i%YJ!"&!6
+%$J6%!!-B"-AmEJ6'$J6&!!-B"-ImE36)$J6(!!-B"-RmE!6+$J6*!!-B!"rmD`6
+,#[aV!!3+BfC[E!`%b`!1!!K*EQ0[E@PZC`!#!!!+r'`!"!TMCQpX$!6+!"X!&@p
+`C@jcFf`Y8dj"8#da16Nj-6)a-3!#!!!+r'd!"!TMCQpX$!6)!!d!"fPZBfaeC'8
+!!J!!#[aZ!!3+BfC[E!`%aJ!9!!peER4TG'aPC#"QEfaNCA)!!J!!$!5h!%i!5%e
+KBfPZG'pcD#")4$T%CA0VG'p`)%C[E'4PFMT*EQ0[E@PZCcT[F'9ZFh0X,90139!
+Y-6Nj16%b-6%kBh*jF(4[1RJe-$Pf-`!#!!!"r,%!!!(mX!!!!Ib[!!!"r+i!!'&
+cBh)!!3!-qYlHV3!!!3!!!*G#!!#@3J!!!AB!!$-8-0J!!!!F!AB!$h0MFhS!!!#
+#6Np853!!!)jcBh"d!!!!QP4&@&3!!3#QFh4jE!!!!,j$6d4&!!%!bN*14%`!!!$
+LBA"XG!!!!1j'8N9'!!!!qNP$6L-!!!%'D@0X0!!!!4*TBh-M!!!"(QPMFc3!!!%
+UD'CNFJ!!!6C659T&!!!"3PG3Eh-!!!&1!!$rr`!!!!!!!!!!!)$rre!!!"i!!!!
+!!)$rr`!!"cJ#DH#m"'Mrr`!!!*S!!!!!%iRrr`!!"Pi!!!!!"'Mrr`!!!53!!!!
+!!!$rrb!!!9)!!!!!!!(rra3!!@i#DG`%!)$rr`!!!Pi#DH"X!!$rr`!!!Ri!!!!
+!!)$rr`!!!S-#DH"d!*Err`!!!Si!!!!!!*Err`!!!j)!!!!!!*Err`!!"CB#DH%
+i!*Err`!!"GS#DH%dkF$rr`!!"[`!!!!!rrrrr`!!"a)!!!!!!)$rr`!!"b!!!!!
+!*4S:

MacOS/opensslconf.h

@@ -0,0 +1,116 @@
+/* MacOS/opensslconf.h */
+
+#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */
+#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR)
+#define OPENSSLDIR "/usr/local/ssl"
+#endif
+#endif
+
+#if defined(HEADER_IDEA_H) && !defined(IDEA_INT)
+#define IDEA_INT unsigned int
+#endif
+
+#if defined(HEADER_MD2_H) && !defined(MD2_INT)
+#define MD2_INT unsigned int
+#endif
+
+#if defined(HEADER_RC2_H) && !defined(RC2_INT)
+/* I need to put in a mod for the alpha - eay */
+#define RC2_INT unsigned int
+#endif
+
+#if defined(HEADER_RC4_H)
+#if !defined(RC4_INT)
+/* using int types make the structure larger but make the code faster
+ * on most boxes I have tested - up to %20 faster. */
+/*
+ * I don't know what does "most" mean, but declaring "int" is a must on:
+ * - Intel P6 because partial register stalls are very expensive;
+ * - elder Alpha because it lacks byte load/store instructions;
+ */
+#define RC4_INT unsigned char
+#endif
+#if !defined(RC4_CHUNK)
+/*
+ * This enables code handling data aligned at natural CPU word
+ * boundary. See crypto/rc4/rc4_enc.c for further details.
+ */
+#define RC4_CHUNK unsigned long
+#endif
+#endif
+
+#if defined(HEADER_DES_H) && !defined(DES_LONG)
+/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a
+ * %20 speed up (longs are 8 bytes, int's are 4). */
+#ifndef DES_LONG
+#define DES_LONG unsigned long
+#endif
+#endif
+
+#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H)
+#define CONFIG_HEADER_BN_H
+#if __option(longlong)
+#  define BN_LLONG
+#else
+#  undef BN_LLONG
+#endif
+
+/* Should we define BN_DIV2W here? */
+
+/* Only one for the following should be defined */
+/* The prime number generation stuff may not work when
+ * EIGHT_BIT but I don't care since I've only used this mode
+ * for debuging the bignum libraries */
+#undef SIXTY_FOUR_BIT_LONG
+#undef SIXTY_FOUR_BIT
+#define THIRTY_TWO_BIT
+#undef SIXTEEN_BIT
+#undef EIGHT_BIT
+#endif
+
+#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H)
+#define CONFIG_HEADER_RC4_LOCL_H
+/* if this is defined data[i] is used instead of *data, this is a %20
+ * speedup on x86 */
+#undef RC4_INDEX
+#endif
+
+#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H)
+#define CONFIG_HEADER_BF_LOCL_H
+#define BF_PTR
+#endif /* HEADER_BF_LOCL_H */
+
+#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H)
+#define CONFIG_HEADER_DES_LOCL_H
+/* the following is tweaked from a config script, that is why it is a
+ * protected undef/define */
+#ifndef DES_PTR
+#define DES_PTR
+#endif
+
+/* This helps C compiler generate the correct code for multiple functional
+ * units.  It reduces register dependancies at the expense of 2 more
+ * registers */
+#ifndef DES_RISC1
+#define DES_RISC1
+#endif
+
+#ifndef DES_RISC2
+#undef DES_RISC2
+#endif
+
+#if defined(DES_RISC1) && defined(DES_RISC2)
+YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!!
+#endif
+
+/* Unroll the inner loop, this sometimes helps, sometimes hinders.
+ * Very mucy CPU dependant */
+#ifndef DES_UNROLL
+#define DES_UNROLL
+#endif
+
+#endif /* HEADER_DES_LOCL_H */
+
+#ifndef __POWERPC__
+#define MD32_XARRAY
+#endif

Makefile.org

@@ -5,8 +5,21 @@
 VERSION=
 MAJOR=
 MINOR=
+SHLIB_VERSION_NUMBER=
+SHLIB_VERSION_HISTORY=
+SHLIB_MAJOR=
+SHLIB_MINOR=
+SHLIB_EXT=
 PLATFORM=dist
 OPTIONS=
+CONFIGURE_ARGS=
+SHLIB_TARGET=
+
+# HERE indicates where this Makefile lives.  This can be used to indicate
+# where sub-Makefiles are expected to be.  Currently has very limited usage,
+# and should probably not be bothered with at all.
+HERE=.
+
 # INSTALL_PREFIX is for package builders so that they can configure
 # for, say, /usr/ and yet have everything installed to /tmp/somedir/usr/.
 # Normally it is left empty.
@@ -16,7 +29,6 @@ INSTALLTOP=/usr/local/ssl
 # Do not edit this manually. Use Configure --openssldir=DIR do change this!
 OPENSSLDIR=/usr/local/ssl
 
-# RSAref  - Define if we are to link with RSAref.
 # NO_IDEA - Define to build without the IDEA algorithm
 # NO_RC4  - Define to build without the RC4 algorithm
 # NO_RC2  - Define to build without the RC2 algorithm
@@ -28,8 +40,6 @@ OPENSSLDIR=/usr/local/ssl
 # DEVRANDOM - Give this the value of the 'random device' if your OS supports
 #           one.  32 bytes will be read from this when the random
 #           number generator is initalised.
-# SSL_ALLOW_ADH - define if you want the server to be able to use the
-#           SSLv3 anon-DH ciphers.
 # SSL_FORBID_ENULL - define if you want the server to be not able to use the
 #           NULL encryption ciphers.
 #
@@ -47,184 +57,316 @@ OPENSSLDIR=/usr/local/ssl
 # equal 4.
 # PKCS1_CHECK - pkcs1 tests.
 
-CC= gcc
-#CFLAG= -DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall -Wuninitialized -DSHA1_ASM -DMD5_ASM -DRMD160_ASM
-CFLAG= -DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall -DSHA1_ASM -DMD5_ASM -DRMD160_ASM
+CC= cc
+CFLAG= -O
 DEPFLAG= 
-PEX_LIBS= -L. -L.. -L../.. -L../../..
+PEX_LIBS= 
 EX_LIBS= 
-AR=ar r
+EXE_EXT= 
+ARFLAGS=
+AR=ar $(ARFLAGS) r
 RANLIB= ranlib
+NM= nm
 PERL= perl
+TAR= tar
+TARFLAGS= --no-recursion
+MAKEDEPPROG=makedepend
+LIBDIR=lib
 
-# Set BN_ASM to bn_asm.o if you want to use the C version
-BN_ASM= bn_asm.o
-#BN_ASM= bn_asm.o
-#BN_ASM= asm/bn86-elf.o	# elf, linux-elf
-#BN_ASM= asm/bn86-sol.o # solaris
-#BN_ASM= asm/bn86-out.o # a.out, FreeBSD
-#BN_ASM= asm/bn86bsdi.o # bsdi
-#BN_ASM= asm/alpha.o    # DEC Alpha
-#BN_ASM= asm/pa-risc2.o # HP-UX PA-RISC
-#BN_ASM= asm/r3000.o    # SGI MIPS cpu
-#BN_ASM= asm/sparc.o    # Sun solaris/SunOS
-#BN_ASM= asm/bn-win32.o # Windows 95/NT
-#BN_ASM= asm/x86w16.o   # 16 bit code for Windows 3.1/DOS
-#BN_ASM= asm/x86w32.o   # 32 bit code for Windows 3.1
+# We let the C compiler driver to take care of .s files. This is done in
+# order to be excused from maintaining a separate set of architecture
+# dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC
+# gcc, then the driver will automatically translate it to -xarch=v8plus
+# and pass it down to assembler.
+AS=$(CC) -c
+ASFLAG=$(CFLAG)
 
 # For x86 assembler: Set PROCESSOR to 386 if you want to support
 # the 80386.
 PROCESSOR=
 
-# Set DES_ENC to des_enc.o if you want to use the C version
-#There are 4 x86 assember options.
-DES_ENC= asm/dx86-out.o asm/yx86-out.o
-#DES_ENC= des_enc.o fcrypt_b.o          # C
-#DES_ENC= asm/dx86-elf.o asm/yx86-elf.o # elf
-#DES_ENC= asm/dx86-sol.o asm/yx86-sol.o # solaris
-#DES_ENC= asm/dx86-out.o asm/yx86-out.o # a.out, FreeBSD
-#DES_ENC= asm/dx86bsdi.o asm/yx86bsdi.o # bsdi
+# CPUID module collects small commonly used assembler snippets
+CPUID_OBJ= 
+BN_ASM= bn_asm.o
+DES_ENC= des_enc.o fcrypt_b.o
+AES_ENC= aes_core.o aes_cbc.o
+BF_ENC= bf_enc.o
+CAST_ENC= c_enc.o
+RC4_ENC= rc4_enc.o
+RC5_ENC= rc5_enc.o
+MD5_ASM_OBJ= 
+SHA1_ASM_OBJ= 
+RMD160_ASM_OBJ= 
+WP_ASM_OBJ=
+CMLL_ENC=
+PERLASM_SCHEME=
 
-# Set BF_ENC to bf_enc.o if you want to use the C version
-#There are 4 x86 assember options.
-BF_ENC= asm/bx86-out.o
-#BF_ENC= bf_enc.o
-#BF_ENC= asm/bx86-elf.o # elf
-#BF_ENC= asm/bx86-sol.o # solaris
-#BF_ENC= asm/bx86-out.o # a.out, FreeBSD
-#BF_ENC= asm/bx86bsdi.o # bsdi
+# KRB5 stuff
+KRB5_INCLUDES=
+LIBKRB5=
 
-# Set CAST_ENC to c_enc.o if you want to use the C version
-#There are 4 x86 assember options.
-CAST_ENC= asm/cx86-out.o
-#CAST_ENC= c_enc.o
-#CAST_ENC= asm/cx86-elf.o # elf
-#CAST_ENC= asm/cx86-sol.o # solaris
-#CAST_ENC= asm/cx86-out.o # a.out, FreeBSD
-#CAST_ENC= asm/cx86bsdi.o # bsdi
+# Zlib stuff
+ZLIB_INCLUDE=
+LIBZLIB=
 
-# Set RC4_ENC to rc4_enc.o if you want to use the C version
-#There are 4 x86 assember options.
-RC4_ENC= asm/rx86-out.o
-#RC4_ENC= rc4_enc.o
-#RC4_ENC= asm/rx86-elf.o # elf
-#RC4_ENC= asm/rx86-sol.o # solaris
-#RC4_ENC= asm/rx86-out.o # a.out, FreeBSD
-#RC4_ENC= asm/rx86bsdi.o # bsdi
-
-# Set RC5_ENC to rc5_enc.o if you want to use the C version
-#There are 4 x86 assember options.
-RC5_ENC= asm/r586-out.o
-#RC5_ENC= rc5_enc.o
-#RC5_ENC= asm/r586-elf.o # elf
-#RC5_ENC= asm/r586-sol.o # solaris
-#RC5_ENC= asm/r586-out.o # a.out, FreeBSD
-#RC5_ENC= asm/r586bsdi.o # bsdi
-
-# Also need MD5_ASM defined
-MD5_ASM_OBJ= asm/mx86-out.o
-#MD5_ASM_OBJ= asm/mx86-elf.o        # elf
-#MD5_ASM_OBJ= asm/mx86-sol.o        # solaris
-#MD5_ASM_OBJ= asm/mx86-out.o        # a.out, FreeBSD
-#MD5_ASM_OBJ= asm/mx86bsdi.o        # bsdi
-
-# Also need SHA1_ASM defined
-SHA1_ASM_OBJ= asm/sx86-out.o
-#SHA1_ASM_OBJ= asm/sx86-elf.o       # elf
-#SHA1_ASM_OBJ= asm/sx86-sol.o       # solaris
-#SHA1_ASM_OBJ= asm/sx86-out.o       # a.out, FreeBSD
-#SHA1_ASM_OBJ= asm/sx86bsdi.o       # bsdi
-
-# Also need RMD160_ASM defined
-RMD160_ASM_OBJ= asm/rm86-out.o
-#RMD160_ASM_OBJ= asm/rm86-elf.o       # elf
-#RMD160_ASM_OBJ= asm/rm86-sol.o       # solaris
-#RMD160_ASM_OBJ= asm/rm86-out.o       # a.out, FreeBSD
-#RMD160_ASM_OBJ= asm/rm86bsdi.o       # bsdi
-
-DIRS=   crypto ssl rsaref apps test tools
+DIRS=   crypto ssl engines apps test tools
+ENGDIRS= ccgost
 SHLIBDIRS= crypto ssl
 
 # dirs in crypto to build
 SDIRS=  \
-	md2 md5 sha mdc2 hmac ripemd \
-	des rc2 rc4 rc5 idea bf cast \
-	bn rsa dsa dh \
-	buffer bio stack lhash rand err objects \
-	evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp
+	objects \
+	md2 md4 md5 sha mdc2 hmac ripemd whrlpool \
+	des aes rc2 rc4 rc5 idea bf cast camellia seed modes \
+	bn ec rsa dsa ecdsa dh ecdh dso engine \
+	buffer bio stack lhash rand err \
+	evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5 \
+	cms pqueue ts jpake store
+# keep in mind that the above list is adjusted by ./Configure
+# according to no-xxx arguments...
 
-MAKEFILE= Makefile.ssl
-MAKE=     make -f Makefile.ssl
+# tests to perform.  "alltests" is a special word indicating that all tests
+# should be performed.
+TESTS = alltests
 
+MAKEFILE= Makefile
+
+MANDIR=$(OPENSSLDIR)/man
 MAN1=1
 MAN3=3
+MANSUFFIX=
+HTMLSUFFIX=html
+HTMLDIR=$(OPENSSLDIR)/html
 SHELL=/bin/sh
 
 TOP=    .
 ONEDIRS=out tmp
 EDIRS=  times doc bugs util include certs ms shlib mt demos perl sf dep VMS
 WDIRS=  windows
-LIBS=   libcrypto.a libssl.a 
+LIBS=   libcrypto.a libssl.a
+SHARED_CRYPTO=libcrypto$(SHLIB_EXT)
+SHARED_SSL=libssl$(SHLIB_EXT)
+SHARED_LIBS=
+SHARED_LIBS_LINK_EXTS=
+SHARED_LDFLAGS=
 
 GENERAL=        Makefile
 BASENAME=       openssl
 NAME=           $(BASENAME)-$(VERSION)
 TARFILE=        $(NAME).tar
 WTARFILE=       $(NAME)-win.tar
-EXHEADER=       e_os.h e_os2.h
+EXHEADER=       e_os2.h
 HEADER=         e_os.h
 
-all: Makefile.ssl
-	@for i in $(DIRS) ;\
-	do \
-	(cd $$i && echo "making all in $$i..." && \
-	$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' SDIRS='${SDIRS}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' all ) || exit 1; \
+all: Makefile build_all openssl.pc libssl.pc libcrypto.pc
+
+# as we stick to -e, CLEARENV ensures that local variables in lower
+# Makefiles remain local and variable. $${VAR+VAR} is tribute to Korn
+# shell, which [annoyingly enough] terminates unset with error if VAR
+# is not present:-( TOP= && unset TOP is tribute to HP-UX /bin/sh,
+# which terminates unset with error if no variable was present:-(
+CLEARENV=	TOP= && unset TOP $${LIB+LIB} $${LIBS+LIBS}	\
+		$${INCLUDE+INCLUDE} $${INCLUDES+INCLUDES}	\
+		$${DIR+DIR} $${DIRS+DIRS} $${SRC+SRC}		\
+		$${LIBSRC+LIBSRC} $${LIBOBJ+LIBOBJ} $${ALL+ALL}	\
+		$${EXHEADER+EXHEADER} $${HEADER+HEADER}		\
+		$${GENERAL+GENERAL} $${CFLAGS+CFLAGS}		\
+		$${ASFLAGS+ASFLAGS} $${AFLAGS+AFLAGS}		\
+		$${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS}		\
+		$${SHAREDCMD+SHAREDCMD} $${SHAREDFLAGS+SHAREDFLAGS}	\
+		$${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS}
+
+BUILDENV=	PLATFORM='$(PLATFORM)' PROCESSOR='$(PROCESSOR)' \
+		CC='$(CC)' CFLAG='$(CFLAG)' 			\
+		AS='$(CC)' ASFLAG='$(CFLAG) -c'			\
+		AR='$(AR)' NM='$(NM)' RANLIB='$(RANLIB)'	\
+		CROSS_COMPILE='$(CROSS_COMPILE)'	\
+		PERL='$(PERL)' ENGDIRS='$(ENGDIRS)'		\
+		SDIRS='$(SDIRS)' LIBRPATH='$(INSTALLTOP)/$(LIBDIR)'	\
+		INSTALL_PREFIX='$(INSTALL_PREFIX)'		\
+		INSTALLTOP='$(INSTALLTOP)' OPENSSLDIR='$(OPENSSLDIR)'	\
+		LIBDIR='$(LIBDIR)'				\
+		MAKEDEPEND='$$$${TOP}/util/domd $$$${TOP} -MD $(MAKEDEPPROG)' \
+		DEPFLAG='-DOPENSSL_NO_DEPRECATED $(DEPFLAG)'	\
+		MAKEDEPPROG='$(MAKEDEPPROG)'			\
+		SHARED_LDFLAGS='$(SHARED_LDFLAGS)'		\
+		KRB5_INCLUDES='$(KRB5_INCLUDES)' LIBKRB5='$(LIBKRB5)'	\
+		ZLIB_INCLUDE='$(ZLIB_INCLUDE)' LIBZLIB='$(LIBZLIB)'	\
+		EXE_EXT='$(EXE_EXT)' SHARED_LIBS='$(SHARED_LIBS)'	\
+		SHLIB_EXT='$(SHLIB_EXT)' SHLIB_TARGET='$(SHLIB_TARGET)'	\
+		PEX_LIBS='$(PEX_LIBS)' EX_LIBS='$(EX_LIBS)'	\
+		CPUID_OBJ='$(CPUID_OBJ)'			\
+		BN_ASM='$(BN_ASM)' DES_ENC='$(DES_ENC)' 	\
+		AES_ENC='$(AES_ENC)' CMLL_ENC='$(CMLL_ENC)'	\
+		BF_ENC='$(BF_ENC)' CAST_ENC='$(CAST_ENC)'	\
+		RC4_ENC='$(RC4_ENC)' RC5_ENC='$(RC5_ENC)'	\
+		SHA1_ASM_OBJ='$(SHA1_ASM_OBJ)'			\
+		MD5_ASM_OBJ='$(MD5_ASM_OBJ)'			\
+		RMD160_ASM_OBJ='$(RMD160_ASM_OBJ)'		\
+		WP_ASM_OBJ='$(WP_ASM_OBJ)'			\
+		PERLASM_SCHEME='$(PERLASM_SCHEME)'		\
+		THIS=$${THIS:-$@} MAKEFILE=Makefile MAKEOVERRIDES=
+# MAKEOVERRIDES= effectively "equalizes" GNU-ish and SysV-ish make flavors,
+# which in turn eliminates ambiguities in variable treatment with -e.
+
+# BUILD_CMD is a generic macro to build a given target in a given
+# subdirectory.  The target must be given through the shell variable
+# `target' and the subdirectory to build in must be given through `dir'.
+# This macro shouldn't be used directly, use RECURSIVE_BUILD_CMD or
+# BUILD_ONE_CMD instead.
+#
+# BUILD_ONE_CMD is a macro to build a given target in a given
+# subdirectory if that subdirectory is part of $(DIRS).  It requires
+# exactly the same shell variables as BUILD_CMD.
+#
+# RECURSIVE_BUILD_CMD is a macro to build a given target in all
+# subdirectories defined in $(DIRS).  It requires that the target
+# is given through the shell variable `target'.
+BUILD_CMD=  if [ -d "$$dir" ]; then \
+	    (	cd $$dir && echo "making $$target in $$dir..." && \
+		$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. DIR=$$dir $$target \
+	    ) || exit 1; \
+	    fi
+RECURSIVE_BUILD_CMD=for dir in $(DIRS); do $(BUILD_CMD); done
+BUILD_ONE_CMD=\
+	if expr " $(DIRS) " : ".* $$dir " >/dev/null 2>&1; then \
+		$(BUILD_CMD); \
+	fi
+
+reflect:
+	@[ -n "$(THIS)" ] && $(CLEARENV) && $(MAKE) $(THIS) -e $(BUILDENV)
+
+sub_all: build_all
+build_all: build_libs build_apps build_tests build_tools
+
+build_libs: build_crypto build_ssl build_engines
+
+build_crypto:
+	@dir=crypto; target=all; $(BUILD_ONE_CMD)
+build_ssl:
+	@dir=ssl; target=all; $(BUILD_ONE_CMD)
+build_engines:
+	@dir=engines; target=all; $(BUILD_ONE_CMD)
+build_apps:
+	@dir=apps; target=all; $(BUILD_ONE_CMD)
+build_tests:
+	@dir=test; target=all; $(BUILD_ONE_CMD)
+build_tools:
+	@dir=tools; target=all; $(BUILD_ONE_CMD)
+
+all_testapps: build_libs build_testapps
+build_testapps:
+	@dir=crypto; target=testapps; $(BUILD_ONE_CMD)
+
+libcrypto$(SHLIB_EXT): libcrypto.a
+	@if [ "$(SHLIB_TARGET)" != "" ]; then \
+		$(MAKE) SHLIBDIRS=crypto build-shared; \
+	else \
+		echo "There's no support for shared libraries on this platform" >&2; \
+		exit 1; \
+	fi
+
+libssl$(SHLIB_EXT): libcrypto$(SHLIB_EXT) libssl.a
+	@if [ "$(SHLIB_TARGET)" != "" ]; then \
+		$(MAKE) SHLIBDIRS=ssl SHLIBDEPS='-lcrypto' build-shared; \
+	else \
+		echo "There's no support for shared libraries on this platform" >&2; \
+		exit 1; \
+	fi
+
+clean-shared:
+	@set -e; for i in $(SHLIBDIRS); do \
+		if [ -n "$(SHARED_LIBS_LINK_EXTS)" ]; then \
+			tmp="$(SHARED_LIBS_LINK_EXTS)"; \
+			for j in $${tmp:-x}; do \
+				( set -x; rm -f lib$$i$$j ); \
+			done; \
+		fi; \
+		( set -x; rm -f lib$$i$(SHLIB_EXT) ); \
+		if [ "$(PLATFORM)" = "Cygwin" ]; then \
+			( set -x; rm -f cyg$$i$(SHLIB_EXT) lib$$i$(SHLIB_EXT).a ); \
+		fi; \
 	done
-	-@# cd perl; $(PERL) Makefile.PL; make
 
-sub_all:
-	@for i in $(DIRS) ;\
-	do \
-	(cd $$i && echo "making all in $$i..." && \
-	$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' all ) || exit 1; \
-	done;
+link-shared:
+	@ set -e; for i in $(SHLIBDIRS); do \
+		$(MAKE) -f $(HERE)/Makefile.shared -e $(BUILDENV) \
+			LIBNAME=$$i LIBVERSION=$(SHLIB_MAJOR).$(SHLIB_MINOR) \
+			LIBCOMPATVERSIONS=";$(SHLIB_VERSION_HISTORY)" \
+			symlink.$(SHLIB_TARGET); \
+		libs="$$libs -l$$i"; \
+	done
 
-linux-shared:
-	for i in ${SHLIBDIRS}; do \
-	rm -f lib$$i.a lib$$i.so \
-		lib$$i.so.${MAJOR} lib$$i.so.${MAJOR}.${MINOR}; \
-	${MAKE} CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='-fPIC ${CFLAG}' SDIRS='${SDIRS}' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' DIRS=$$i clean all || exit 1; \
-	( set -x; ${CC}  -shared -o lib$$i.so.${MAJOR}.${MINOR} \
-		-Wl,-S,-soname=lib$$i.so.${MAJOR} \
-		-Wl,--whole-archive lib$$i.a \
-		-Wl,--no-whole-archive -lc ) || exit 1; \
-	rm -f lib$$i.a; make -C $$i clean || exit 1 ;\
-	done;
-	@set -x; \
-	for i in ${SHLIBDIRS}; do \
-	ln -s lib$$i.so.${MAJOR}.${MINOR} lib$$i.so.${MAJOR}; \
-	ln -s lib$$i.so.${MAJOR} lib$$i.so; \
-	done;
+build-shared: do_$(SHLIB_TARGET) link-shared
 
-Makefile.ssl: Makefile.org
-	@echo "Makefile.ssl is older than Makefile.org."
+do_$(SHLIB_TARGET):
+	@ set -e; libs='-L. $(SHLIBDEPS)'; for i in $(SHLIBDIRS); do \
+		if [ "$$i" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+			libs="$(LIBKRB5) $$libs"; \
+		fi; \
+		$(CLEARENV) && $(MAKE) -f Makefile.shared -e $(BUILDENV) \
+			LIBNAME=$$i LIBVERSION=$(SHLIB_MAJOR).$(SHLIB_MINOR) \
+			LIBCOMPATVERSIONS=";$(SHLIB_VERSION_HISTORY)" \
+			LIBDEPS="$$libs $(EX_LIBS)" \
+			link_a.$(SHLIB_TARGET); \
+		libs="-l$$i $$libs"; \
+	done
+
+libcrypto.pc: Makefile
+	@ ( echo 'prefix=$(INSTALLTOP)'; \
+	    echo 'exec_prefix=$${prefix}'; \
+	    echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
+	    echo 'includedir=$${prefix}/include'; \
+	    echo ''; \
+	    echo 'Name: OpenSSL-libcrypto'; \
+	    echo 'Description: OpenSSL cryptography library'; \
+	    echo 'Version: '$(VERSION); \
+	    echo 'Requires: '; \
+	    echo 'Libs: -L$${libdir} -lcrypto $(EX_LIBS)'; \
+	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libcrypto.pc
+
+libssl.pc: Makefile
+	@ ( echo 'prefix=$(INSTALLTOP)'; \
+	    echo 'exec_prefix=$${prefix}'; \
+	    echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
+	    echo 'includedir=$${prefix}/include'; \
+	    echo ''; \
+	    echo 'Name: OpenSSL'; \
+	    echo 'Description: Secure Sockets Layer and cryptography libraries'; \
+	    echo 'Version: '$(VERSION); \
+	    echo 'Requires: '; \
+	    echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
+	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libssl.pc
+
+openssl.pc: Makefile
+	@ ( echo 'prefix=$(INSTALLTOP)'; \
+	    echo 'exec_prefix=$${prefix}'; \
+	    echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
+	    echo 'includedir=$${prefix}/include'; \
+	    echo ''; \
+	    echo 'Name: OpenSSL'; \
+	    echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \
+	    echo 'Version: '$(VERSION); \
+	    echo 'Requires: '; \
+	    echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
+	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > openssl.pc
+
+Makefile: Makefile.org Configure config
+	@echo "Makefile is older than Makefile.org, Configure or config."
 	@echo "Reconfigure the source tree (via './config' or 'perl Configure'), please."
 	@false
 
 libclean:
-	rm -f *.a */lib */*/lib
+	rm -f *.map *.so *.so.* *.dll engines/*.so engines/*.dll *.a engines/*.a */lib */*/lib
 
-clean:
-	rm -f shlib/*.o *.o core a.out fluff *.map
-	@for i in $(DIRS) ;\
-	do \
-	(cd $$i && echo "making clean in $$i..." && \
-	$(MAKE) SDIRS='${SDIRS}' clean ) || exit 1; \
-	rm -f $(LIBS); \
-	done;
-	rm -f *.a *.o speed.* *.map *.so .pure core
+clean:	libclean
+	rm -f shlib/*.o *.o core a.out fluff rehash.time testlog make.log cctest cctest.c
+	@set -e; target=clean; $(RECURSIVE_BUILD_CMD)
+	rm -f $(LIBS)
+	rm -f openssl.pc libssl.pc libcrypto.pc
+	rm -f speed.* .pure
 	rm -f $(TARFILE)
-	@for i in $(ONEDIRS) ;\
+	@set -e; for i in $(ONEDIRS) ;\
 	do \
 	rm -fr $$i/*; \
 	done
@@ -234,118 +376,263 @@ makefile.one: files
 	sh util/do_ms.sh
 
 files:
-	$(PERL) $(TOP)/util/files.pl Makefile.ssl > $(TOP)/MINFO
-	@for i in $(DIRS) ;\
-	do \
-	(cd $$i && echo "making 'files' in $$i..." && \
-	$(MAKE) SDIRS='${SDIRS}' PERL='${PERL}' files ) || exit 1; \
-	done;
+	$(PERL) $(TOP)/util/files.pl Makefile > $(TOP)/MINFO
+	@set -e; target=files; $(RECURSIVE_BUILD_CMD)
 
 links:
-	@$(TOP)/util/point.sh Makefile.ssl Makefile
 	@$(PERL) $(TOP)/util/mkdir-p.pl include/openssl
 	@$(PERL) $(TOP)/util/mklink.pl include/openssl $(EXHEADER)
-	@for i in $(DIRS); do \
-	(cd $$i && echo "making links in $$i..." && \
-	$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PERL='${PERL}' links ) || exit 1; \
-	done;
+	@set -e; target=links; $(RECURSIVE_BUILD_CMD)
+
+gentests:
+	@(cd test && echo "generating dummy tests (if needed)..." && \
+	$(CLEARENV) && $(MAKE) -e $(BUILDENV) TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on generate );
 
 dclean:
-	rm -f *.bak
-	@for i in $(DIRS) ;\
-	do \
-	(cd $$i && echo "making dclean in $$i..." && \
-	$(MAKE) SDIRS='${SDIRS}' PERL='${PERL}' dclean ) || exit 1; \
-	done;
+	rm -rf *.bak include/openssl certs/.0
+	@set -e; target=dclean; $(RECURSIVE_BUILD_CMD)
 
-rehash:
-	@(OPENSSL="`pwd`/apps/openssl"; export OPENSSL; sh tools/c_rehash certs)
+rehash: rehash.time
+rehash.time: certs apps
+	@if [ -z "$(CROSS_COMPILE)" ]; then \
+		(OPENSSL="`pwd`/util/opensslwrap.sh"; \
+		[ -x "apps/openssl.exe" ] && OPENSSL="apps/openssl.exe" || :; \
+		OPENSSL_DEBUG_MEMORY=on; \
+		export OPENSSL OPENSSL_DEBUG_MEMORY; \
+		$(PERL) tools/c_rehash certs) && \
+		touch rehash.time; \
+	else :; fi
 
 test:   tests
 
 tests: rehash
 	@(cd test && echo "testing..." && \
-	$(MAKE) CC='${CC}' CFLAG='${CFLAG}' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SDIRS='${SDIRS}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' tests );
-	@apps/openssl version -a
+	$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on OPENSSL_CONF=../apps/openssl.cnf tests );
+	OPENSSL_CONF=apps/openssl.cnf util/opensslwrap.sh version -a
+
+report:
+	@$(PERL) util/selftest.pl
 
 depend:
-	@for i in $(DIRS) ;\
-	do \
-	(cd $$i && echo "making dependencies $$i..." && \
-	$(MAKE) SDIRS='${SDIRS}' DEPFLAG='${DEPFLAG}' depend ) || exit 1; \
-	done;
+	@set -e; target=depend; $(RECURSIVE_BUILD_CMD)
 
 lint:
-	@for i in $(DIRS) ;\
-	do \
-	(cd $$i && echo "making lint $$i..." && \
-	$(MAKE) SDIRS='${SDIRS}' lint ) || exit 1; \
-	done;
+	@set -e; target=lint; $(RECURSIVE_BUILD_CMD)
 
 tags:
-	@for i in $(DIRS) ;\
-	do \
-	(cd $$i && echo "making tags $$i..." && \
-	$(MAKE) SDIRS='${SDIRS}' tags ) || exit 1; \
-	done;
+	rm -f TAGS
+	find . -name '[^.]*.[ch]' | xargs etags -a
 
 errors:
-	perl util/mkerr.pl -recurse -write
+	$(PERL) util/mkerr.pl -recurse -write
+	(cd engines; $(MAKE) PERL=$(PERL) errors)
+	$(PERL) util/ck_errf.pl */*.c */*/*.c
+
+stacks:
+	$(PERL) util/mkstack.pl -write
 
 util/libeay.num::
-	perl util/mkdef.pl crypto update
+	$(PERL) util/mkdef.pl crypto update
 
 util/ssleay.num::
-	perl util/mkdef.pl ssl update
+	$(PERL) util/mkdef.pl ssl update
+
+crypto/objects/obj_dat.h: crypto/objects/obj_dat.pl crypto/objects/obj_mac.h
+	$(PERL) crypto/objects/obj_dat.pl crypto/objects/obj_mac.h crypto/objects/obj_dat.h
+crypto/objects/obj_mac.h: crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num
+	$(PERL) crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num crypto/objects/obj_mac.h
+crypto/objects/obj_xref.h: crypto/objects/objxref.pl crypto/objects/obj_xref.txt crypto/objects/obj_mac.num
+	$(PERL) crypto/objects/objxref.pl crypto/objects/obj_mac.num crypto/objects/obj_xref.txt >crypto/objects/obj_xref.h
+
+apps/openssl-vms.cnf: apps/openssl.cnf
+	$(PERL) VMS/VMSify-conf.pl < apps/openssl.cnf > apps/openssl-vms.cnf
+
+crypto/bn/bn_prime.h: crypto/bn/bn_prime.pl
+	$(PERL) crypto/bn/bn_prime.pl >crypto/bn/bn_prime.h
+
 
 TABLE: Configure
 	(echo 'Output of `Configure TABLE'"':"; \
-	perl Configure TABLE) > TABLE
+	$(PERL) Configure TABLE) > TABLE
 
-update: depend errors util/libeay.num util/ssleay.num TABLE
+update: errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_dat.h crypto/objects/obj_xref.h apps/openssl-vms.cnf crypto/bn/bn_prime.h TABLE depend
 
+# Build distribution tar-file. As the list of files returned by "find" is
+# pretty long, on several platforms a "too many arguments" error or similar
+# would occur. Therefore the list of files is temporarily stored into a file
+# and read directly, requiring GNU-Tar. Call "make TAR=gtar dist" if the normal
+# tar does not support the --files-from option.
 tar:
-	@tar --norecurse -cvf - \
-		`find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE | sort` |\
+	find . -type d -print | xargs chmod 755
+	find . -type f -print | xargs chmod a+r
+	find . -type f -perm -0100 -print | xargs chmod a+x
+	find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE | sort > ../$(TARFILE).list; \
+	$(TAR) $(TARFLAGS) --files-from ../$(TARFILE).list -cvf - | \
 	tardy --user_number=0  --user_name=openssl \
 	      --group_number=0 --group_name=openssl \
 	      --prefix=openssl-$(VERSION) - |\
 	gzip --best >../$(TARFILE).gz; \
+	rm -f ../$(TARFILE).list; \
 	ls -l ../$(TARFILE).gz
 
+tar-snap:
+	@$(TAR) $(TARFLAGS) -cvf - \
+		`find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE \! -name '*.o' \! -name '*.a' \! -name '*.so' \! -name '*.so.*'  \! -name 'openssl' \! -name '*test' \! -name '.#*' \! -name '*~' | sort` |\
+	tardy --user_number=0  --user_name=openssl \
+	      --group_number=0 --group_name=openssl \
+	      --prefix=openssl-$(VERSION) - > ../$(TARFILE);\
+	ls -l ../$(TARFILE)
+
 dist:   
 	$(PERL) Configure dist
 	@$(MAKE) dist_pem_h
-	@$(MAKE) SDIRS='${SDIRS}' clean
-	@$(MAKE) tar
+	@$(MAKE) SDIRS='$(SDIRS)' clean
+	@$(MAKE) TAR='$(TAR)' TARFLAGS='$(TARFLAGS)' tar
 
 dist_pem_h:
-	(cd crypto/pem; $(MAKE) CC='${CC}' SDIRS='${SDIRS}' CFLAG='${CFLAG}' pem.h; $(MAKE) clean)
+	(cd crypto/pem; $(MAKE) -e $(BUILDENV) pem.h; $(MAKE) clean)
 
-install: all
+install: all install_docs install_sw
+
+install_sw:
 	@$(PERL) $(TOP)/util/mkdir-p.pl $(INSTALL_PREFIX)$(INSTALLTOP)/bin \
-		$(INSTALL_PREFIX)$(INSTALLTOP)/lib \
+		$(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR) \
+		$(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/engines \
+		$(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig \
 		$(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl \
 		$(INSTALL_PREFIX)$(OPENSSLDIR)/misc \
 		$(INSTALL_PREFIX)$(OPENSSLDIR)/certs \
-		$(INSTALL_PREFIX)$(OPENSSLDIR)/private \
-		$(INSTALL_PREFIX)$(OPENSSLDIR)/lib
-	@for i in $(EXHEADER) ;\
+		$(INSTALL_PREFIX)$(OPENSSLDIR)/private
+	@set -e; headerlist="$(EXHEADER)"; for i in $$headerlist;\
 	do \
 	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
 	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
 	done;
-	@for i in $(DIRS) ;\
+	@set -e; target=install; $(RECURSIVE_BUILD_CMD)
+	@set -e; for i in $(LIBS) ;\
 	do \
-	(cd $$i; echo "installing $$i..."; \
-	$(MAKE) CC='${CC}' CFLAG='${CFLAG}' INSTALL_PREFIX='${INSTALL_PREFIX}' INSTALLTOP='${INSTALLTOP}' OPENSSLDIR='${OPENSSLDIR}' EX_LIBS='${EX_LIBS}' SDIRS='${SDIRS}' install ); \
+		if [ -f "$$i" ]; then \
+		(       echo installing $$i; \
+			cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+			$(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+			chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+			mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i ); \
+		fi; \
+	done;
+	@set -e; if [ -n "$(SHARED_LIBS)" ]; then \
+		tmp="$(SHARED_LIBS)"; \
+		for i in $${tmp:-x}; \
+		do \
+			if [ -f "$$i" -o -f "$$i.a" ]; then \
+			(       echo installing $$i; \
+				if [ "$(PLATFORM)" != "Cygwin" ]; then \
+					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+					chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
+				else \
+					c=`echo $$i | sed 's/^lib\(.*\)\.dll\.a/cyg\1-$(SHLIB_VERSION_NUMBER).dll/'`; \
+					cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
+					chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
+					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
+					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+					chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
+				fi ); \
+				if expr $(PLATFORM) : 'mingw' > /dev/null; then \
+				(	case $$i in \
+						*crypto*) i=libeay32.dll;; \
+						*ssl*)    i=ssleay32.dll;; \
+					esac; \
+					echo installing $$i; \
+	 				cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
+	 				chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
+	 				mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i ); \
+				fi; \
+			fi; \
+		done; \
+		(	here="`pwd`"; \
+			cd $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR); \
+			$(MAKE) -f $$here/Makefile HERE="$$here" link-shared ); \
+		if [ "$(INSTALLTOP)" != "/usr" ]; then \
+			echo 'OpenSSL shared libraries have been installed in:'; \
+			echo '  $(INSTALLTOP)'; \
+			echo ''; \
+			sed -e '1,/^$$/d' doc/openssl-shared.txt; \
+		fi; \
+	fi
+	cp libcrypto.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
+	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libcrypto.pc
+	cp libssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
+	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libssl.pc
+	cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
+	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/openssl.pc
+
+install_html_docs:
+	here="`pwd`"; \
+	for subdir in apps crypto ssl; do \
+		mkdir -p $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir; \
+		for i in doc/$$subdir/*.pod; do \
+			fn=`basename $$i .pod`; \
+			echo "installing html/$$fn.$(HTMLSUFFIX)"; \
+			cat $$i \
+			| sed -r 's/L<([^)]*)(\([0-9]\))?\|([^)]*)(\([0-9]\))?>/L<\1|\3>/g' \
+			| pod2html --podroot=doc --htmlroot=.. --podpath=apps:crypto:ssl \
+			| sed -r 's/<!DOCTYPE.*//g' \
+			> $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir/$$fn.$(HTMLSUFFIX); \
+			$(PERL) util/extract-names.pl < $$i | \
+				grep -v $$filecase "^$$fn\$$" | \
+				(cd $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir; \
+				 while read n; do \
+					PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$(HTMLSUFFIX) "$$n".$(HTMLSUFFIX); \
+				 done); \
+		done; \
 	done
-	@for i in $(LIBS) ;\
-	do \
-	(       echo installing $$i; \
-		cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \
-		$(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
-		chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i ); \
+
+install_docs:
+	@$(PERL) $(TOP)/util/mkdir-p.pl \
+		$(INSTALL_PREFIX)$(MANDIR)/man1 \
+		$(INSTALL_PREFIX)$(MANDIR)/man3 \
+		$(INSTALL_PREFIX)$(MANDIR)/man5 \
+		$(INSTALL_PREFIX)$(MANDIR)/man7
+	@pod2man="`cd ./util; ./pod2mantest $(PERL)`"; \
+	here="`pwd`"; \
+	filecase=; \
+	if [ "$(PLATFORM)" = "DJGPP" -o "$(PLATFORM)" = "Cygwin" -o "$(PLATFORM)" = "mingw" ]; then \
+		filecase=-i; \
+	fi; \
+	set -e; for i in doc/apps/*.pod; do \
+		fn=`basename $$i .pod`; \
+		sec=`$(PERL) util/extract-section.pl 1 < $$i`; \
+		echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
+		(cd `$(PERL) util/dirname.pl $$i`; \
+		sh -c "$$pod2man \
+			--section=$$sec --center=OpenSSL \
+			--release=$(VERSION) `basename $$i`") \
+			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
+		$(PERL) util/extract-names.pl < $$i | \
+			(grep -v $$filecase "^$$fn\$$"; true) | \
+			(grep -v "[	]"; true) | \
+			(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
+			 while read n; do \
+				PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
+			 done); \
+	done; \
+	set -e; for i in doc/crypto/*.pod doc/ssl/*.pod; do \
+		fn=`basename $$i .pod`; \
+		sec=`$(PERL) util/extract-section.pl 3 < $$i`; \
+		echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
+		(cd `$(PERL) util/dirname.pl $$i`; \
+		sh -c "$$pod2man \
+			--section=$$sec --center=OpenSSL \
+			--release=$(VERSION) `basename $$i`") \
+			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
+		$(PERL) util/extract-names.pl < $$i | \
+			(grep -v $$filecase "^$$fn\$$"; true) | \
+			(grep -v "[	]"; true) | \
+			(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
+			 while read n; do \
+				PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
+			 done); \
 	done
 
 # DO NOT DELETE THIS LINE -- make depend depends on it.

Makefile.shared

@@ -0,0 +1,655 @@
+#
+# Helper makefile to link shared libraries in a portable way.
+# This is much simpler than libtool, and hopefully not too error-prone.
+#
+# The following variables need to be set on the command line to build
+# properly
+
+# CC contains the current compiler.  This one MUST be defined
+CC=cc
+CFLAGS=$(CFLAG)
+# LDFLAGS contains flags to be used when temporary object files (when building
+# shared libraries) are created, or when an application is linked.
+# SHARED_LDFLAGS contains flags to be used when the shared library is created.
+LDFLAGS=
+SHARED_LDFLAGS=
+
+NM=nm
+
+# LIBNAME contains just the name of the library, without prefix ("lib"
+# on Unix, "cyg" for certain forms under Cygwin...) or suffix (.a, .so,
+# .dll, ...).  This one MUST have a value when using this makefile to
+# build shared libraries.
+# For example, to build libfoo.so, you need to do the following:
+#LIBNAME=foo
+LIBNAME=
+
+# APPNAME contains just the name of the application, without suffix (""
+# on Unix, ".exe" on Windows, ...).  This one MUST have a value when using
+# this makefile to build applications.
+# For example, to build foo, you need to do the following:
+#APPNAME=foo
+APPNAME=
+
+# OBJECTS contains all the object files to link together into the application.
+# This must contain at least one object file.
+#OBJECTS=foo.o
+OBJECTS=
+
+# LIBEXTRAS contains extra modules to link together with the library.
+# For example, if a second library, say libbar.a needs to be linked into
+# libfoo.so, you need to do the following:
+#LIBEXTRAS=libbar.a
+# Note that this MUST be used when using the link_o targets, to hold the
+# names of all object files that go into the target library.
+LIBEXTRAS=
+
+# LIBVERSION contains the current version of the library.
+# For example, to build libfoo.so.1.2, you need to do the following:
+#LIBVERSION=1.2
+LIBVERSION=
+
+# LIBCOMPATVERSIONS contains the compatibility versions (a list) of
+# the library.  They MUST be in decreasing order.
+# For example, if libfoo.so.1.2.1 is backward compatible with libfoo.so.1.2
+# and libfoo.so.1, you need to do the following:
+#LIBCOMPATVERSIONS=1.2 1
+# Note that on systems that use sonames, the last number will appear as
+# part of it.
+# It's also possible, for systems that support it (Tru64, for example),
+# to add extra compatibility info with more precision, by adding a second
+# list of versions, separated from the first with a semicolon, like this:
+#LIBCOMPATVERSIONS=1.2 1;1.2.0 1.1.2 1.1.1 1.1.0 1.0.0
+LIBCOMPATVERSIONS=
+
+# LIBDEPS contains all the flags necessary to cover all necessary
+# dependencies to other libraries.
+LIBDEPS=
+
+#------------------------------------------------------------------------------
+# The rest is private to this makefile.
+
+SET_X=:
+#SET_X=set -x
+
+top:
+	echo "Trying to use this makefile interactively?  Don't."
+
+CALC_VERSIONS=	\
+	SHLIB_COMPAT=; SHLIB_SOVER=; \
+	if [ -n "$(LIBVERSION)$(LIBCOMPATVERSIONS)" ]; then \
+		prev=""; \
+		for v in `echo "$(LIBVERSION) $(LIBCOMPATVERSIONS)" | cut -d';' -f1`; do \
+			SHLIB_SOVER_NODOT=$$v; \
+			SHLIB_SOVER=.$$v; \
+			if [ -n "$$prev" ]; then \
+				SHLIB_COMPAT="$$SHLIB_COMPAT .$$prev"; \
+			fi; \
+			prev=$$v; \
+		done; \
+	fi
+
+LINK_APP=	\
+  ( $(SET_X);   \
+    LIBDEPS="$${LIBDEPS:-$(LIBDEPS)}"; \
+    LDCMD="$${LDCMD:-$(CC)}"; LDFLAGS="$${LDFLAGS:-$(CFLAGS)}"; \
+    LIBPATH=`for x in $$LIBDEPS; do echo $$x; done | sed -e 's/^ *-L//;t' -e d | uniq`; \
+    LIBPATH=`echo $$LIBPATH | sed -e 's/ /:/g'`; \
+    LD_LIBRARY_PATH=$$LIBPATH:$$LD_LIBRARY_PATH \
+    $${LDCMD} $${LDFLAGS} -o $${APPNAME:=$(APPNAME)} $(OBJECTS) $${LIBDEPS} )
+
+LINK_SO=	\
+  ( $(SET_X);   \
+    LIBDEPS="$${LIBDEPS:-$(LIBDEPS)}"; \
+    SHAREDCMD="$${SHAREDCMD:-$(CC)}"; \
+    SHAREDFLAGS="$${SHAREDFLAGS:-$(CFLAGS) $(SHARED_LDFLAGS)}"; \
+    LIBPATH=`for x in $$LIBDEPS; do echo $$x; done | sed -e 's/^ *-L//;t' -e d | uniq`; \
+    LIBPATH=`echo $$LIBPATH | sed -e 's/ /:/g'`; \
+    LD_LIBRARY_PATH=$$LIBPATH:$$LD_LIBRARY_PATH \
+    $${SHAREDCMD} $${SHAREDFLAGS} \
+	-o $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX \
+	$$ALLSYMSFLAGS $$SHOBJECTS $$NOALLSYMSFLAGS $$LIBDEPS \
+  ) && $(SYMLINK_SO)
+
+SYMLINK_SO=	\
+	if [ -n "$$INHIBIT_SYMLINKS" ]; then :; else \
+		prev=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX; \
+		if [ -n "$$SHLIB_COMPAT" ]; then \
+			for x in $$SHLIB_COMPAT; do \
+				( $(SET_X); rm -f $$SHLIB$$x$$SHLIB_SUFFIX; \
+				  ln -s $$prev $$SHLIB$$x$$SHLIB_SUFFIX ); \
+				prev=$$SHLIB$$x$$SHLIB_SUFFIX; \
+			done; \
+		fi; \
+		if [ -n "$$SHLIB_SOVER" ]; then \
+			( $(SET_X); rm -f $$SHLIB$$SHLIB_SUFFIX; \
+			  ln -s $$prev $$SHLIB$$SHLIB_SUFFIX ); \
+		fi; \
+	fi
+
+LINK_SO_A=	SHOBJECTS="lib$(LIBNAME).a $(LIBEXTRAS)"; $(LINK_SO)
+LINK_SO_O=	SHOBJECTS="$(LIBEXTRAS)"; $(LINK_SO)
+
+LINK_SO_A_VIA_O=	\
+  SHOBJECTS=lib$(LIBNAME).o; \
+  ALL=$$ALLSYMSFLAGS; ALLSYMSFLAGS=; NOALLSYMSFLAGS=; \
+  ( $(SET_X); \
+    ld $(LDFLAGS) -r -o lib$(LIBNAME).o $$ALL lib$(LIBNAME).a $(LIBEXTRAS) ); \
+  $(LINK_SO) && rm -f lib$(LIBNAME).o
+
+LINK_SO_A_UNPACKED=	\
+  UNPACKDIR=link_tmp.$$$$; rm -rf $$UNPACKDIR; mkdir $$UNPACKDIR; \
+  (cd $$UNPACKDIR; ar x ../lib$(LIBNAME).a) && \
+  ([ -z "$(LIBEXTRAS)" ] || cp $(LIBEXTRAS) $$UNPACKDIR) && \
+  SHOBJECTS=$$UNPACKDIR/*.o; \
+  $(LINK_SO) && rm -rf $$UNPACKDIR
+
+DETECT_GNU_LD=($(CC) -Wl,-V /dev/null 2>&1 | grep '^GNU ld' )>/dev/null
+
+DO_GNU_SO=$(CALC_VERSIONS); \
+	SHLIB=lib$(LIBNAME).so; \
+	SHLIB_SUFFIX=; \
+	ALLSYMSFLAGS='-Wl,--whole-archive'; \
+	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-Bsymbolic -Wl,-soname=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"
+
+DO_GNU_APP=LDFLAGS="$(CFLAGS) -Wl,-rpath,$(LIBRPATH)"
+
+#This is rather special.  It's a special target with which one can link
+#applications without bothering with any features that have anything to
+#do with shared libraries, for example when linking against static
+#libraries.  It's mostly here to avoid a lot of conditionals everywhere
+#else...
+link_app.:
+	$(LINK_APP)
+
+link_o.gnu:
+	@ $(DO_GNU_SO); $(LINK_SO_O)
+link_a.gnu:
+	@ $(DO_GNU_SO); $(LINK_SO_A)
+link_app.gnu:
+	@ $(DO_GNU_APP); $(LINK_APP)
+
+DO_BEOS_SO=	SHLIB=lib$(LIBNAME).so; \
+	SHLIB_SUFFIX=; \
+	ALLSYMSFLAGS='-Wl,--whole-archive'; \
+	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-Bsymbolic -Wl,-soname=$$SHLIB$$SHLIB_SUFFIX"
+
+link_o.beos:
+	@ $(DO_BEOS_SO); $(LINK_SO_O)
+link_a.beos:
+	@ $(DO_BEOS_SO); $(LINK_SO_A)
+
+link_o.bsd:
+	@if $(DETECT_GNU_LD); then $(DO_GNU_SO); else \
+	$(CALC_VERSIONS); \
+	SHLIB=lib$(LIBNAME).so; \
+	SHLIB_SUFFIX=; \
+	LIBDEPS=" "; \
+	ALLSYMSFLAGS="-Wl,-Bforcearchive"; \
+	NOALLSYMSFLAGS=; \
+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -nostdlib"; \
+	fi; $(LINK_SO_O)
+link_a.bsd:
+	@if $(DETECT_GNU_LD); then $(DO_GNU_SO); else \
+	$(CALC_VERSIONS); \
+	SHLIB=lib$(LIBNAME).so; \
+	SHLIB_SUFFIX=; \
+	LIBDEPS=" "; \
+	ALLSYMSFLAGS="-Wl,-Bforcearchive"; \
+	NOALLSYMSFLAGS=; \
+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -nostdlib"; \
+	fi; $(LINK_SO_A)
+link_app.bsd:
+	@if $(DETECT_GNU_LD); then $(DO_GNU_APP); else \
+	LDFLAGS="$(CFLAGS) -Wl,-rpath,$(LIBPATH)"; \
+	fi; $(LINK_APP)
+
+# For Darwin AKA Mac OS/X (dyld)
+# Originally link_o.darwin produced .so, because it was hard-coded
+# in dso_dlfcn module. At later point dso_dlfcn switched to .dylib
+# extension in order to allow for run-time linking with vendor-
+# supplied shared libraries such as libz, so that link_o.darwin had
+# to be harmonized with it. This caused minor controversy, because
+# it was believed that dlopen can't be used to dynamically load
+# .dylib-s, only so called bundle modules (ones linked with -bundle
+# flag). The belief seems to be originating from pre-10.4 release,
+# where dlfcn functionality was emulated by dlcompat add-on. In
+# 10.4 dlopen was rewritten as native part of dyld and is documented
+# to be capable of loading both dynamic libraries and bundles. In
+# order to provide compatibility with pre-10.4 dlopen, modules are
+# linked with -bundle flag, which makes .dylib extension misleading.
+# It works, because dlopen is [and always was] extension-agnostic.
+# Alternative to this heuristic approach is to develop specific
+# MacOS X dso module relying on whichever "native" dyld interface.
+link_o.darwin:
+	@ $(CALC_VERSIONS); \
+	SHLIB=lib$(LIBNAME); \
+	SHLIB_SUFFIX=.dylib; \
+	ALLSYMSFLAGS='-all_load'; \
+	NOALLSYMSFLAGS=''; \
+	SHAREDFLAGS="$(CFLAGS) `echo $(SHARED_LDFLAGS) | sed s/dynamiclib/bundle/`"; \
+	if [ -n "$(LIBVERSION)" ]; then \
+		SHAREDFLAGS="$$SHAREDFLAGS -current_version $(LIBVERSION)"; \
+	fi; \
+	if [ -n "$$SHLIB_SOVER_NODOT" ]; then \
+		SHAREDFLAGS="$$SHAREDFLAGS -compatibility_version $$SHLIB_SOVER_NODOT"; \
+	fi; \
+	$(LINK_SO_O)
+link_a.darwin:
+	@ $(CALC_VERSIONS); \
+	SHLIB=lib$(LIBNAME); \
+	SHLIB_SUFFIX=.dylib; \
+	ALLSYMSFLAGS='-all_load'; \
+	NOALLSYMSFLAGS=''; \
+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS)"; \
+	if [ -n "$(LIBVERSION)" ]; then \
+		SHAREDFLAGS="$$SHAREDFLAGS -current_version $(LIBVERSION)"; \
+	fi; \
+	if [ -n "$$SHLIB_SOVER_NODOT" ]; then \
+		SHAREDFLAGS="$$SHAREDFLAGS -compatibility_version $$SHLIB_SOVER_NODOT"; \
+	fi; \
+	SHAREDFLAGS="$$SHAREDFLAGS -install_name $(INSTALLTOP)/$(LIBDIR)/$$SHLIB$(SHLIB_EXT)"; \
+	$(LINK_SO_A)
+link_app.darwin:	# is there run-path on darwin?
+	$(LINK_APP)
+
+link_o.cygwin:
+	@ $(CALC_VERSIONS); \
+	INHIBIT_SYMLINKS=yes; \
+	SHLIB=cyg$(LIBNAME); \
+	base=-Wl,--enable-auto-image-base; \
+	deffile=; \
+	if expr $(PLATFORM) : 'mingw' > /dev/null; then \
+		SHLIB=$(LIBNAME)eay32; base=; \
+		if test -f $(LIBNAME)eay32.def; then \
+			deffile=$(LIBNAME)eay32.def; \
+		fi; \
+	fi; \
+	SHLIB_SUFFIX=.dll; \
+	LIBVERSION="$(LIBVERSION)"; \
+	SHLIB_SOVER=${LIBVERSION:+"-$(LIBVERSION)"}; \
+	ALLSYMSFLAGS='-Wl,--whole-archive'; \
+	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared $$base $$deffile -Wl,-s,-Bsymbolic"; \
+	$(LINK_SO_O)
+#for mingw target if def-file is in use dll-name should match library-name
+link_a.cygwin:
+	@ $(CALC_VERSIONS); \
+	INHIBIT_SYMLINKS=yes; \
+	SHLIB=cyg$(LIBNAME); SHLIB_SOVER=-$(LIBVERSION); SHLIB_SUFFIX=.dll; \
+	dll_name=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX; extras=; \
+	base=-Wl,--enable-auto-image-base; \
+	if expr $(PLATFORM) : 'mingw' > /dev/null; then \
+		case $(LIBNAME) in \
+			crypto) SHLIB=libeay;; \
+			ssl) SHLIB=ssleay;; \
+		esac; \
+		SHLIB_SOVER=32; \
+		extras="$(LIBNAME).def"; \
+		$(PERL) util/mkdef.pl 32 $$SHLIB > $$extras; \
+		base=; [ $(LIBNAME) = "crypto" ] && base=-Wl,--image-base,0x63000000; \
+	fi; \
+	dll_name=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX; \
+	$(PERL) util/mkrc.pl $$dll_name | \
+		$(CROSS_COMPILE)windres -o rc.o; \
+	extras="$$extras rc.o"; \
+	ALLSYMSFLAGS='-Wl,--whole-archive'; \
+	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared $$base -Wl,-s,-Bsymbolic -Wl,--out-implib,lib$(LIBNAME).dll.a $$extras"; \
+	[ -f apps/$$dll_name ] && rm apps/$$dll_name; \
+	[ -f test/$$dll_name ] && rm test/$$dll_name; \
+	$(LINK_SO_A) || exit 1; \
+	rm $$extras; \
+	cp -p $$dll_name apps/; \
+	cp -p $$dll_name test/
+link_app.cygwin:
+	@if expr "$(CFLAGS)" : '.*OPENSSL_USE_APPLINK' > /dev/null; then \
+		LIBDEPS="$(TOP)/crypto/applink.o $${LIBDEPS:-$(LIBDEPS)}"; \
+		export LIBDEPS; \
+	fi; \
+	$(LINK_APP)
+
+link_o.alpha-osf1:
+	@ if $(DETECT_GNU_LD); then \
+		$(DO_GNU_SO); \
+	else \
+		SHLIB=lib$(LIBNAME).so; \
+		SHLIB_SUFFIX=; \
+		SHLIB_HIST=`echo "$(LIBCOMPATVERSIONS)" | cut -d';' -f2 | sed -e 's/ */:/'`; \
+		if [ -n "$$SHLIB_HIST" ]; then \
+			SHLIB_HIST="$${SHLIB_HIST}:$(LIBVERSION)"; \
+		else \
+			SHLIB_HIST="$(LIBVERSION)"; \
+		fi; \
+		SHLIB_SOVER=; \
+		ALLSYMSFLAGS='-all'; \
+		NOALLSYMSFLAGS='-none'; \
+		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-B,symbolic"; \
+		if [ -n "$$SHLIB_HIST" ]; then \
+			SHAREDFLAGS="$$SHAREDFLAGS -set_version $$SHLIB_HIST"; \
+		fi; \
+	fi; \
+	$(LINK_SO_O)
+link_a.alpha-osf1:
+	@ if $(DETECT_GNU_LD); then \
+		$(DO_GNU_SO); \
+	else \
+		SHLIB=lib$(LIBNAME).so; \
+		SHLIB_SUFFIX=; \
+		SHLIB_HIST=`echo "$(LIBCOMPATVERSIONS)" | cut -d';' -f2 | sed -e 's/ */:/'`; \
+		if [ -n "$$SHLIB_HIST" ]; then \
+			SHLIB_HIST="$${SHLIB_HIST}:$(LIBVERSION)"; \
+		else \
+			SHLIB_HIST="$(LIBVERSION)"; \
+		fi; \
+		SHLIB_SOVER=; \
+		ALLSYMSFLAGS='-all'; \
+		NOALLSYMSFLAGS='-none'; \
+		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-B,symbolic"; \
+		if [ -n "$$SHLIB_HIST" ]; then \
+			SHAREDFLAGS="$$SHAREDFLAGS -set_version $$SHLIB_HIST"; \
+		fi; \
+	fi; \
+	$(LINK_SO_A)
+link_app.alpha-osf1:
+	@if $(DETECT_GNU_LD); then \
+		$(DO_GNU_APP); \
+	else \
+		LDFLAGS="$(CFLAGS) -rpath $(LIBRPATH)"; \
+	fi; \
+	$(LINK_APP)
+
+link_o.solaris:
+	@ if $(DETECT_GNU_LD); then \
+		$(DO_GNU_SO); \
+	else \
+		$(CALC_VERSIONS); \
+		MINUSZ='-z '; \
+		($(CC) -v 2>&1 | grep gcc) > /dev/null && MINUSZ='-Wl,-z,'; \
+		SHLIB=lib$(LIBNAME).so; \
+		SHLIB_SUFFIX=; \
+		ALLSYMSFLAGS="$${MINUSZ}allextract"; \
+		NOALLSYMSFLAGS="$${MINUSZ}defaultextract"; \
+		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX -Wl,-Bsymbolic"; \
+	fi; \
+	$(LINK_SO_O)
+link_a.solaris:
+	@ if $(DETECT_GNU_LD); then \
+		$(DO_GNU_SO); \
+	else \
+		$(CALC_VERSIONS); \
+		MINUSZ='-z '; \
+		($(CC) -v 2>&1 | grep gcc) > /dev/null && MINUSZ='-Wl,-z,'; \
+		SHLIB=lib$(LIBNAME).so; \
+		SHLIB_SUFFIX=;\
+		ALLSYMSFLAGS="$${MINUSZ}allextract"; \
+		NOALLSYMSFLAGS="$${MINUSZ}defaultextract"; \
+		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX -Wl,-Bsymbolic"; \
+	fi; \
+	$(LINK_SO_A)
+link_app.solaris:
+	@ if $(DETECT_GNU_LD); then \
+		$(DO_GNU_APP); \
+	else \
+		LDFLAGS="$(CFLAGS) -R $(LIBRPATH)"; \
+	fi; \
+	$(LINK_APP)
+
+# OpenServer 5 native compilers used
+link_o.svr3:
+	@ if $(DETECT_GNU_LD); then \
+		$(DO_GNU_SO); \
+	else \
+		$(CALC_VERSIONS); \
+		SHLIB=lib$(LIBNAME).so; \
+		SHLIB_SUFFIX=; \
+		ALLSYMSFLAGS=''; \
+		NOALLSYMSFLAGS=''; \
+		SHAREDFLAGS="$(CFLAGS) -G -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"; \
+	fi; \
+	$(LINK_SO_O)
+link_a.svr3:
+	@ if $(DETECT_GNU_LD); then \
+		$(DO_GNU_SO); \
+	else \
+		$(CALC_VERSIONS); \
+		SHLIB=lib$(LIBNAME).so; \
+		SHLIB_SUFFIX=; \
+		ALLSYMSFLAGS=''; \
+		NOALLSYMSFLAGS=''; \
+		SHAREDFLAGS="$(CFLAGS) -G -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"; \
+	fi; \
+	$(LINK_SO_A_UNPACKED)
+link_app.svr3:
+	@$(DETECT_GNU_LD) && $(DO_GNU_APP); \
+	$(LINK_APP)
+
+# UnixWare 7 and OpenUNIX 8 native compilers used
+link_o.svr5:
+	@ if $(DETECT_GNU_LD); then \
+		$(DO_GNU_SO); \
+	else \
+		$(CALC_VERSIONS); \
+		SHARE_FLAG='-G'; \
+		($(CC) -v 2>&1 | grep gcc) > /dev/null && SHARE_FLAG='-shared'; \
+		SHLIB=lib$(LIBNAME).so; \
+		SHLIB_SUFFIX=; \
+		ALLSYMSFLAGS=''; \
+		NOALLSYMSFLAGS=''; \
+		SHAREDFLAGS="$(CFLAGS) $${SHARE_FLAG} -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"; \
+	fi; \
+	$(LINK_SO_O)
+link_a.svr5:
+	@ if $(DETECT_GNU_LD); then \
+		$(DO_GNU_SO); \
+	else \
+		$(CALC_VERSIONS); \
+		SHARE_FLAG='-G'; \
+		($(CC) -v 2>&1 | grep gcc) > /dev/null && SHARE_FLAG='-shared'; \
+		SHLIB=lib$(LIBNAME).so; \
+		SHLIB_SUFFIX=; \
+		ALLSYMSFLAGS=''; \
+		NOALLSYMSFLAGS=''; \
+		SHAREDFLAGS="$(CFLAGS) $${SHARE_FLAG} -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"; \
+	fi; \
+	$(LINK_SO_A_UNPACKED)
+link_app.svr5:
+	@$(DETECT_GNU_LD) && $(DO_GNU_APP); \
+	$(LINK_APP)
+
+link_o.irix:
+	@ if $(DETECT_GNU_LD); then \
+		$(DO_GNU_SO); \
+	else \
+		$(CALC_VERSIONS); \
+		SHLIB=lib$(LIBNAME).so; \
+		SHLIB_SUFFIX=; \
+		MINUSWL=""; \
+		($(CC) -v 2>&1 | grep gcc) > /dev/null && MINUSWL="-Wl,"; \
+		ALLSYMSFLAGS="$${MINUSWL}-all"; \
+		NOALLSYMSFLAGS="$${MINUSWL}-none"; \
+		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-soname,$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX,-B,symbolic"; \
+	fi; \
+	$(LINK_SO_O)
+link_a.irix:
+	@ if $(DETECT_GNU_LD); then \
+		$(DO_GNU_SO); \
+	else \
+		$(CALC_VERSIONS); \
+		SHLIB=lib$(LIBNAME).so; \
+		SHLIB_SUFFIX=; \
+		MINUSWL=""; \
+		($(CC) -v 2>&1 | grep gcc) > /dev/null && MINUSWL="-Wl,"; \
+		ALLSYMSFLAGS="$${MINUSWL}-all"; \
+		NOALLSYMSFLAGS="$${MINUSWL}-none"; \
+		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-soname,$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX,-B,symbolic"; \
+	fi; \
+	$(LINK_SO_A)
+link_app.irix:
+	@LDFLAGS="$(CFLAGS) -Wl,-rpath,$(LIBRPATH)"; \
+	$(LINK_APP)
+
+# 32-bit PA-RISC HP-UX embeds the -L pathname of libs we link with, so
+# we compensate for it with +cdp ../: and +cdp ./:. Yes, these rewrite
+# rules imply that we can only link one level down in catalog structure,
+# but that's what takes place for the moment of this writing. +cdp option
+# was introduced in HP-UX 11.x and applies in 32-bit PA-RISC link
+# editor context only [it's simply ignored in other cases, which are all
+# ELFs by the way].
+#
+link_o.hpux:
+	@if $(DETECT_GNU_LD); then $(DO_GNU_SO); else \
+	$(CALC_VERSIONS); \
+	SHLIB=lib$(LIBNAME).sl; \
+	expr "$(CFLAGS)" : '.*DSO_DLFCN' > /dev/null && SHLIB=lib$(LIBNAME).so; \
+	SHLIB_SUFFIX=; \
+	ALLSYMSFLAGS='-Wl,-Fl'; \
+	NOALLSYMSFLAGS=''; \
+	expr $(PLATFORM) : 'hpux64' > /dev/null && ALLSYMSFLAGS='-Wl,+forceload'; \
+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -Wl,-B,symbolic,+vnocompatwarnings,-z,+s,+h,$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX,+cdp,../:,+cdp,./:"; \
+	fi; \
+	rm -f $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX || :; \
+	$(LINK_SO_O) && chmod a=rx $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX
+link_a.hpux:
+	@if $(DETECT_GNU_LD); then $(DO_GNU_SO); else \
+	$(CALC_VERSIONS); \
+	SHLIB=lib$(LIBNAME).sl; \
+	expr $(PLATFORM) : '.*ia64' > /dev/null && SHLIB=lib$(LIBNAME).so; \
+	SHLIB_SUFFIX=; \
+	ALLSYMSFLAGS='-Wl,-Fl'; \
+	NOALLSYMSFLAGS=''; \
+	expr $(PLATFORM) : 'hpux64' > /dev/null && ALLSYMSFLAGS='-Wl,+forceload'; \
+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -Wl,-B,symbolic,+vnocompatwarnings,-z,+s,+h,$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX,+cdp,../:,+cdp,./:"; \
+	fi; \
+	rm -f $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX || :; \
+	$(LINK_SO_A) && chmod a=rx $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX
+link_app.hpux:
+	@if $(DETECT_GNU_LD); then $(DO_GNU_APP); else \
+	LDFLAGS="$(CFLAGS) -Wl,+s,+cdp,../:,+cdp,./:,+b,$(LIBRPATH)"; \
+	fi; \
+	$(LINK_APP)
+
+link_o.aix:
+	@ $(CALC_VERSIONS); \
+	OBJECT_MODE=`expr "x$(SHARED_LDFLAGS)" : 'x\-[a-z]*\(64\)'` || :; \
+	OBJECT_MODE=$${OBJECT_MODE:-32}; export OBJECT_MODE; \
+	SHLIB=lib$(LIBNAME).so; \
+	SHLIB_SUFFIX=; \
+	ALLSYMSFLAGS=''; \
+	NOALLSYMSFLAGS=''; \
+	SHAREDFLAGS='$(CFLAGS) $(SHARED_LDFLAGS) -Wl,-bexpall,-bnolibpath,-bM:SRE'; \
+	$(LINK_SO_O);
+link_a.aix:
+	@ $(CALC_VERSIONS); \
+	OBJECT_MODE=`expr "x$(SHARED_LDFLAGS)" : 'x\-[a-z]*\(64\)'` || : ; \
+	OBJECT_MODE=$${OBJECT_MODE:-32}; export OBJECT_MODE; \
+	SHLIB=lib$(LIBNAME).so; \
+	SHLIB_SUFFIX=; \
+	ALLSYMSFLAGS='-bnogc'; \
+	NOALLSYMSFLAGS=''; \
+	SHAREDFLAGS='$(CFLAGS) $(SHARED_LDFLAGS) -Wl,-bexpall,-bnolibpath,-bM:SRE'; \
+	$(LINK_SO_A_VIA_O)
+link_app.aix:
+	LDFLAGS="$(CFLAGS) -Wl,-brtl,-blibpath:$(LIBRPATH):$${LIBPATH:-/usr/lib:/lib}"; \
+	$(LINK_APP)
+
+link_o.reliantunix:
+	@ $(CALC_VERSIONS); \
+	SHLIB=lib$(LIBNAME).so; \
+	SHLIB_SUFFIX=; \
+	ALLSYMSFLAGS=; \
+	NOALLSYMSFLAGS=''; \
+	SHAREDFLAGS='$(CFLAGS) -G'; \
+	$(LINK_SO_O)
+link_a.reliantunix:
+	@ $(CALC_VERSIONS); \
+	SHLIB=lib$(LIBNAME).so; \
+	SHLIB_SUFFIX=; \
+	ALLSYMSFLAGS=; \
+	NOALLSYMSFLAGS=''; \
+	SHAREDFLAGS='$(CFLAGS) -G'; \
+	$(LINK_SO_A_UNPACKED)
+link_app.reliantunix:
+	$(LINK_APP)
+
+# Targets to build symbolic links when needed
+symlink.gnu symlink.solaris symlink.svr3 symlink.svr5 symlink.irix \
+symlink.aix symlink.reliantunix:
+	@ $(CALC_VERSIONS); \
+	SHLIB=lib$(LIBNAME).so; \
+	$(SYMLINK_SO)
+symlink.darwin:
+	@ $(CALC_VERSIONS); \
+	SHLIB=lib$(LIBNAME); \
+	SHLIB_SUFFIX=.dylib; \
+	$(SYMLINK_SO)
+symlink.hpux:
+	@ $(CALC_VERSIONS); \
+	SHLIB=lib$(LIBNAME).sl; \
+	expr $(PLATFORM) : '.*ia64' > /dev/null && SHLIB=lib$(LIBNAME).so; \
+	$(SYMLINK_SO)
+# The following lines means those specific architectures do no symlinks
+symlink.cygwin symlink.alpha-osf1 symlink.tru64 symlink.tru64-rpath symlink.beos:
+
+# Compatibility targets
+link_o.bsd-gcc-shared link_o.linux-shared link_o.gnu-shared: link_o.gnu
+link_a.bsd-gcc-shared link_a.linux-shared link_a.gnu-shared: link_a.gnu
+link_app.bsd-gcc-shared link_app.linux-shared link_app.gnu-shared: link_app.gnu
+symlink.bsd-gcc-shared symlink.bsd-shared symlink.linux-shared symlink.gnu-shared: symlink.gnu
+link_o.bsd-shared: link_o.bsd
+link_a.bsd-shared: link_a.bsd
+link_app.bsd-shared: link_app.bsd
+link_o.darwin-shared: link_o.darwin
+link_a.darwin-shared: link_a.darwin
+link_app.darwin-shared: link_app.darwin
+symlink.darwin-shared: symlink.darwin
+link_o.cygwin-shared: link_o.cygwin
+link_a.cygwin-shared: link_a.cygwin
+link_app.cygwin-shared: link_app.cygwin
+symlink.cygwin-shared: symlink.cygwin
+link_o.alpha-osf1-shared: link_o.alpha-osf1
+link_a.alpha-osf1-shared: link_a.alpha-osf1
+link_app.alpha-osf1-shared: link_app.alpha-osf1
+symlink.alpha-osf1-shared: symlink.alpha-osf1
+link_o.tru64-shared: link_o.tru64
+link_a.tru64-shared: link_a.tru64
+link_app.tru64-shared: link_app.tru64
+symlink.tru64-shared: symlink.tru64
+link_o.tru64-shared-rpath: link_o.tru64-rpath
+link_a.tru64-shared-rpath: link_a.tru64-rpath
+link_app.tru64-shared-rpath: link_app.tru64-rpath
+symlink.tru64-shared-rpath: symlink.tru64-rpath
+link_o.solaris-shared: link_o.solaris
+link_a.solaris-shared: link_a.solaris
+link_app.solaris-shared: link_app.solaris
+symlink.solaris-shared: symlink.solaris
+link_o.svr3-shared: link_o.svr3
+link_a.svr3-shared: link_a.svr3
+link_app.svr3-shared: link_app.svr3
+symlink.svr3-shared: symlink.svr3
+link_o.svr5-shared: link_o.svr5
+link_a.svr5-shared: link_a.svr5
+link_app.svr5-shared: link_app.svr5
+symlink.svr5-shared: symlink.svr5
+link_o.irix-shared: link_o.irix
+link_a.irix-shared: link_a.irix
+link_app.irix-shared: link_app.irix
+symlink.irix-shared: symlink.irix
+link_o.hpux-shared: link_o.hpux
+link_a.hpux-shared: link_a.hpux
+link_app.hpux-shared: link_app.hpux
+symlink.hpux-shared: symlink.hpux
+link_o.aix-shared: link_o.aix
+link_a.aix-shared: link_a.aix
+link_app.aix-shared: link_app.aix
+symlink.aix-shared: symlink.aix
+link_o.reliantunix-shared: link_o.reliantunix
+link_a.reliantunix-shared: link_a.reliantunix
+link_app.reliantunix-shared: link_app.reliantunix
+symlink.reliantunix-shared: symlink.reliantunix
+link_o.beos-shared: link_o.beos
+link_a.beos-shared: link_a.beos
+link_app.beos-shared: link_app.gnu
+symlink.beos-shared: symlink.beos

NEWS

@@ -5,6 +5,549 @@
   This file gives a brief overview of the major changes between each OpenSSL
   release. For more details please read the CHANGES file.
 
+  Major changes between OpenSSL 1.0.0f and OpenSSL 1.0.0g:
+
+      o Fix for DTLS DoS issue CVE-2012-0050
+
+  Major changes between OpenSSL 1.0.0e and OpenSSL 1.0.0f:
+
+      o Fix for DTLS plaintext recovery attack CVE-2011-4108
+      o Clear block padding bytes of SSL 3.0 records CVE-2011-4576
+      o Only allow one SGC handshake restart for SSL/TLS CVE-2011-4619
+      o Check parameters are not NULL in GOST ENGINE CVE-2012-0027
+      o Check for malformed RFC3779 data CVE-2011-4577
+
+  Major changes between OpenSSL 1.0.0d and OpenSSL 1.0.0e:
+
+      o Fix for CRL vulnerability issue CVE-2011-3207
+      o Fix for ECDH crashes CVE-2011-3210
+      o Protection against EC timing attacks.
+      o Support ECDH ciphersuites for certificates using SHA2 algorithms.
+      o Various DTLS fixes.
+
+  Major changes between OpenSSL 1.0.0c and OpenSSL 1.0.0d:
+
+      o Fix for security issue CVE-2011-0014
+
+  Major changes between OpenSSL 1.0.0b and OpenSSL 1.0.0c:
+
+      o Fix for security issue CVE-2010-4180
+      o Fix for CVE-2010-4252
+      o Fix mishandling of absent EC point format extension.
+      o Fix various platform compilation issues.
+      o Corrected fix for security issue CVE-2010-3864.
+
+  Major changes between OpenSSL 1.0.0a and OpenSSL 1.0.0b:
+
+      o Fix for security issue CVE-2010-3864.
+      o Fix for CVE-2010-2939
+      o Fix WIN32 build system for GOST ENGINE.
+
+  Major changes between OpenSSL 1.0.0 and OpenSSL 1.0.0a:
+
+      o Fix for security issue CVE-2010-1633.
+      o GOST MAC and CFB fixes.
+
+  Major changes between OpenSSL 0.9.8n and OpenSSL 1.0.0:
+
+      o RFC3280 path validation: sufficient to process PKITS tests.
+      o Integrated support for PVK files and keyblobs.
+      o Change default private key format to PKCS#8.
+      o CMS support: able to process all examples in RFC4134
+      o Streaming ASN1 encode support for PKCS#7 and CMS.
+      o Multiple signer and signer add support for PKCS#7 and CMS.
+      o ASN1 printing support.
+      o Whirlpool hash algorithm added.
+      o RFC3161 time stamp support.
+      o New generalised public key API supporting ENGINE based algorithms.
+      o New generalised public key API utilities.
+      o New ENGINE supporting GOST algorithms.
+      o SSL/TLS GOST ciphersuite support.
+      o PKCS#7 and CMS GOST support.
+      o RFC4279 PSK ciphersuite support.
+      o Supported points format extension for ECC ciphersuites.
+      o ecdsa-with-SHA224/256/384/512 signature types.
+      o dsa-with-SHA224 and dsa-with-SHA256 signature types.
+      o Opaque PRF Input TLS extension support.
+      o Updated time routines to avoid OS limitations.
+
+  Major changes between OpenSSL 0.9.8q and OpenSSL 0.9.8r:
+
+      o Fix for security issue CVE-2011-0014
+
+  Major changes between OpenSSL 0.9.8p and OpenSSL 0.9.8q:
+
+      o Fix for security issue CVE-2010-4180
+      o Fix for CVE-2010-4252
+
+  Major changes between OpenSSL 0.9.8o and OpenSSL 0.9.8p:
+
+      o Fix for security issue CVE-2010-3864.
+
+  Major changes between OpenSSL 0.9.8n and OpenSSL 0.9.8o:
+
+      o Fix for security issue CVE-2010-0742.
+      o Various DTLS fixes.
+      o Recognise SHA2 certificates if only SSL algorithms added.
+      o Fix for no-rc4 compilation.
+      o Chil ENGINE unload workaround.
+
+  Major changes between OpenSSL 0.9.8m and OpenSSL 0.9.8n:
+
+      o CFB cipher definition fixes.
+      o Fix security issues CVE-2010-0740 and CVE-2010-0433.
+
+  Major changes between OpenSSL 0.9.8l and OpenSSL 0.9.8m:
+
+      o Cipher definition fixes.
+      o Workaround for slow RAND_poll() on some WIN32 versions.
+      o Remove MD2 from algorithm tables.
+      o SPKAC handling fixes.
+      o Support for RFC5746 TLS renegotiation extension.
+      o Compression memory leak fixed.
+      o Compression session resumption fixed.
+      o Ticket and SNI coexistence fixes.
+      o Many fixes to DTLS handling. 
+
+  Major changes between OpenSSL 0.9.8k and OpenSSL 0.9.8l:
+
+      o Temporary work around for CVE-2009-3555: disable renegotiation.
+
+  Major changes between OpenSSL 0.9.8j and OpenSSL 0.9.8k:
+
+      o Fix various build issues.
+      o Fix security issues (CVE-2009-0590, CVE-2009-0591, CVE-2009-0789)
+
+  Major changes between OpenSSL 0.9.8i and OpenSSL 0.9.8j:
+
+      o Fix security issue (CVE-2008-5077)
+      o Merge FIPS 140-2 branch code.
+
+  Major changes between OpenSSL 0.9.8g and OpenSSL 0.9.8h:
+
+      o CryptoAPI ENGINE support.
+      o Various precautionary measures.
+      o Fix for bugs affecting certificate request creation.
+      o Support for local machine keyset attribute in PKCS#12 files.
+
+  Major changes between OpenSSL 0.9.8f and OpenSSL 0.9.8g:
+
+      o Backport of CMS functionality to 0.9.8.
+      o Fixes for bugs introduced with 0.9.8f.
+
+  Major changes between OpenSSL 0.9.8e and OpenSSL 0.9.8f:
+
+      o Add gcc 4.2 support.
+      o Add support for AES and SSE2 assembly lanugauge optimization
+        for VC++ build.
+      o Support for RFC4507bis and server name extensions if explicitly 
+        selected at compile time.
+      o DTLS improvements.
+      o RFC4507bis support.
+      o TLS Extensions support.
+
+  Major changes between OpenSSL 0.9.8d and OpenSSL 0.9.8e:
+
+      o Various ciphersuite selection fixes.
+      o RFC3779 support.
+
+  Major changes between OpenSSL 0.9.8c and OpenSSL 0.9.8d:
+
+      o Introduce limits to prevent malicious key DoS  (CVE-2006-2940)
+      o Fix security issues (CVE-2006-2937, CVE-2006-3737, CVE-2006-4343)
+      o Changes to ciphersuite selection algorithm
+
+  Major changes between OpenSSL 0.9.8b and OpenSSL 0.9.8c:
+
+      o Fix Daniel Bleichenbacher forged signature attack, CVE-2006-4339
+      o New cipher Camellia
+
+  Major changes between OpenSSL 0.9.8a and OpenSSL 0.9.8b:
+
+      o Cipher string fixes.
+      o Fixes for VC++ 2005.
+      o Updated ECC cipher suite support.
+      o New functions EVP_CIPHER_CTX_new() and EVP_CIPHER_CTX_free().
+      o Zlib compression usage fixes.
+      o Built in dynamic engine compilation support on Win32.
+      o Fixes auto dynamic engine loading in Win32.
+
+  Major changes between OpenSSL 0.9.8 and OpenSSL 0.9.8a:
+
+      o Fix potential SSL 2.0 rollback, CVE-2005-2969
+      o Extended Windows CE support
+
+  Major changes between OpenSSL 0.9.7g and OpenSSL 0.9.8:
+
+      o Major work on the BIGNUM library for higher efficiency and to
+        make operations more streamlined and less contradictory.  This
+        is the result of a major audit of the BIGNUM library.
+      o Addition of BIGNUM functions for fields GF(2^m) and NIST
+        curves, to support the Elliptic Crypto functions.
+      o Major work on Elliptic Crypto; ECDH and ECDSA added, including
+        the use through EVP, X509 and ENGINE.
+      o New ASN.1 mini-compiler that's usable through the OpenSSL
+        configuration file.
+      o Added support for ASN.1 indefinite length constructed encoding.
+      o New PKCS#12 'medium level' API to manipulate PKCS#12 files.
+      o Complete rework of shared library construction and linking
+        programs with shared or static libraries, through a separate
+        Makefile.shared.
+      o Rework of the passing of parameters from one Makefile to another.
+      o Changed ENGINE framework to load dynamic engine modules
+        automatically from specifically given directories.
+      o New structure and ASN.1 functions for CertificatePair.
+      o Changed the ZLIB compression method to be stateful.
+      o Changed the key-generation and primality testing "progress"
+        mechanism to take a structure that contains the ticker
+        function and an argument.
+      o New engine module: GMP (performs private key exponentiation).
+      o New engine module: VIA PadLOck ACE extension in VIA C3
+        Nehemiah processors.
+      o Added support for IPv6 addresses in certificate extensions.
+        See RFC 1884, section 2.2.
+      o Added support for certificate policy mappings, policy
+        constraints and name constraints.
+      o Added support for multi-valued AVAs in the OpenSSL
+        configuration file.
+      o Added support for multiple certificates with the same subject
+        in the 'openssl ca' index file.
+      o Make it possible to create self-signed certificates using
+        'openssl ca -selfsign'.
+      o Make it possible to generate a serial number file with
+        'openssl ca -create_serial'.
+      o New binary search functions with extended functionality.
+      o New BUF functions.
+      o New STORE structure and library to provide an interface to all
+        sorts of data repositories.  Supports storage of public and
+        private keys, certificates, CRLs, numbers and arbitrary blobs.
+	This library is unfortunately unfinished and unused withing
+	OpenSSL.
+      o New control functions for the error stack.
+      o Changed the PKCS#7 library to support one-pass S/MIME
+        processing.
+      o Added the possibility to compile without old deprecated
+        functionality with the OPENSSL_NO_DEPRECATED macro or the
+        'no-deprecated' argument to the config and Configure scripts.
+      o Constification of all ASN.1 conversion functions, and other
+        affected functions.
+      o Improved platform support for PowerPC.
+      o New FIPS 180-2 algorithms (SHA-224, -256, -384 and -512).
+      o New X509_VERIFY_PARAM structure to support parametrisation
+        of X.509 path validation.
+      o Major overhaul of RC4 performance on Intel P4, IA-64 and
+        AMD64.
+      o Changed the Configure script to have some algorithms disabled
+        by default.  Those can be explicitely enabled with the new
+        argument form 'enable-xxx'.
+      o Change the default digest in 'openssl' commands from MD5 to
+        SHA-1.
+      o Added support for DTLS.
+      o New BIGNUM blinding.
+      o Added support for the RSA-PSS encryption scheme
+      o Added support for the RSA X.931 padding.
+      o Added support for BSD sockets on NetWare.
+      o Added support for files larger than 2GB.
+      o Added initial support for Win64.
+      o Added alternate pkg-config files.
+
+  Major changes between OpenSSL 0.9.7l and OpenSSL 0.9.7m:
+
+      o FIPS 1.1.1 module linking.
+      o Various ciphersuite selection fixes.
+
+  Major changes between OpenSSL 0.9.7k and OpenSSL 0.9.7l:
+
+      o Introduce limits to prevent malicious key DoS  (CVE-2006-2940)
+      o Fix security issues (CVE-2006-2937, CVE-2006-3737, CVE-2006-4343)
+
+  Major changes between OpenSSL 0.9.7j and OpenSSL 0.9.7k:
+
+      o Fix Daniel Bleichenbacher forged signature attack, CVE-2006-4339
+
+  Major changes between OpenSSL 0.9.7i and OpenSSL 0.9.7j:
+
+      o Visual C++ 2005 fixes.
+      o Update Windows build system for FIPS.
+
+  Major changes between OpenSSL 0.9.7h and OpenSSL 0.9.7i:
+
+      o Give EVP_MAX_MD_SIZE it's old value, except for a FIPS build.
+
+  Major changes between OpenSSL 0.9.7g and OpenSSL 0.9.7h:
+
+      o Fix SSL 2.0 Rollback, CVE-2005-2969
+      o Allow use of fixed-length exponent on DSA signing
+      o Default fixed-window RSA, DSA, DH private-key operations
+
+  Major changes between OpenSSL 0.9.7f and OpenSSL 0.9.7g:
+
+      o More compilation issues fixed.
+      o Adaptation to more modern Kerberos API.
+      o Enhanced or corrected configuration for Solaris64, Mingw and Cygwin.
+      o Enhanced x86_64 assembler BIGNUM module.
+      o More constification.
+      o Added processing of proxy certificates (RFC 3820).
+
+  Major changes between OpenSSL 0.9.7e and OpenSSL 0.9.7f:
+
+      o Several compilation issues fixed.
+      o Many memory allocation failure checks added.
+      o Improved comparison of X509 Name type.
+      o Mandatory basic checks on certificates.
+      o Performance improvements.
+
+  Major changes between OpenSSL 0.9.7d and OpenSSL 0.9.7e:
+
+      o Fix race condition in CRL checking code.
+      o Fixes to PKCS#7 (S/MIME) code.
+
+  Major changes between OpenSSL 0.9.7c and OpenSSL 0.9.7d:
+
+      o Security: Fix Kerberos ciphersuite SSL/TLS handshaking bug
+      o Security: Fix null-pointer assignment in do_change_cipher_spec()
+      o Allow multiple active certificates with same subject in CA index
+      o Multiple X509 verification fixes
+      o Speed up HMAC and other operations
+
+  Major changes between OpenSSL 0.9.7b and OpenSSL 0.9.7c:
+
+      o Security: fix various ASN1 parsing bugs.
+      o New -ignore_err option to OCSP utility.
+      o Various interop and bug fixes in S/MIME code.
+      o SSL/TLS protocol fix for unrequested client certificates.
+
+  Major changes between OpenSSL 0.9.7a and OpenSSL 0.9.7b:
+
+      o Security: counter the Klima-Pokorny-Rosa extension of
+        Bleichbacher's attack 
+      o Security: make RSA blinding default.
+      o Configuration: Irix fixes, AIX fixes, better mingw support.
+      o Support for new platforms: linux-ia64-ecc.
+      o Build: shared library support fixes.
+      o ASN.1: treat domainComponent correctly.
+      o Documentation: fixes and additions.
+
+  Major changes between OpenSSL 0.9.7 and OpenSSL 0.9.7a:
+
+      o Security: Important security related bugfixes.
+      o Enhanced compatibility with MIT Kerberos.
+      o Can be built without the ENGINE framework.
+      o IA32 assembler enhancements.
+      o Support for new platforms: FreeBSD/IA64 and FreeBSD/Sparc64.
+      o Configuration: the no-err option now works properly.
+      o SSL/TLS: now handles manual certificate chain building.
+      o SSL/TLS: certain session ID malfunctions corrected.
+
+  Major changes between OpenSSL 0.9.6 and OpenSSL 0.9.7:
+
+      o New library section OCSP.
+      o Complete rewrite of ASN1 code.
+      o CRL checking in verify code and openssl utility.
+      o Extension copying in 'ca' utility.
+      o Flexible display options in 'ca' utility.
+      o Provisional support for international characters with UTF8.
+      o Support for external crypto devices ('engine') is no longer
+        a separate distribution.
+      o New elliptic curve library section.
+      o New AES (Rijndael) library section.
+      o Support for new platforms: Windows CE, Tandem OSS, A/UX, AIX 64-bit,
+        Linux x86_64, Linux 64-bit on Sparc v9
+      o Extended support for some platforms: VxWorks
+      o Enhanced support for shared libraries.
+      o Now only builds PIC code when shared library support is requested.
+      o Support for pkg-config.
+      o Lots of new manuals.
+      o Makes symbolic links to or copies of manuals to cover all described
+        functions.
+      o Change DES API to clean up the namespace (some applications link also
+        against libdes providing similar functions having the same name).
+        Provide macros for backward compatibility (will be removed in the
+        future).
+      o Unify handling of cryptographic algorithms (software and engine)
+        to be available via EVP routines for asymmetric and symmetric ciphers.
+      o NCONF: new configuration handling routines.
+      o Change API to use more 'const' modifiers to improve error checking
+        and help optimizers.
+      o Finally remove references to RSAref.
+      o Reworked parts of the BIGNUM code.
+      o Support for new engines: Broadcom ubsec, Accelerated Encryption
+        Processing, IBM 4758.
+      o A few new engines added in the demos area.
+      o Extended and corrected OID (object identifier) table.
+      o PRNG: query at more locations for a random device, automatic query for
+        EGD style random sources at several locations.
+      o SSL/TLS: allow optional cipher choice according to server's preference.
+      o SSL/TLS: allow server to explicitly set new session ids.
+      o SSL/TLS: support Kerberos cipher suites (RFC2712).
+	Only supports MIT Kerberos for now.
+      o SSL/TLS: allow more precise control of renegotiations and sessions.
+      o SSL/TLS: add callback to retrieve SSL/TLS messages.
+      o SSL/TLS: support AES cipher suites (RFC3268).
+
+  Major changes between OpenSSL 0.9.6j and OpenSSL 0.9.6k:
+
+      o Security: fix various ASN1 parsing bugs.
+      o SSL/TLS protocol fix for unrequested client certificates.
+
+  Major changes between OpenSSL 0.9.6i and OpenSSL 0.9.6j:
+
+      o Security: counter the Klima-Pokorny-Rosa extension of
+        Bleichbacher's attack 
+      o Security: make RSA blinding default.
+      o Build: shared library support fixes.
+
+  Major changes between OpenSSL 0.9.6h and OpenSSL 0.9.6i:
+
+      o Important security related bugfixes.
+
+  Major changes between OpenSSL 0.9.6g and OpenSSL 0.9.6h:
+
+      o New configuration targets for Tandem OSS and A/UX.
+      o New OIDs for Microsoft attributes.
+      o Better handling of SSL session caching.
+      o Better comparison of distinguished names.
+      o Better handling of shared libraries in a mixed GNU/non-GNU environment.
+      o Support assembler code with Borland C.
+      o Fixes for length problems.
+      o Fixes for uninitialised variables.
+      o Fixes for memory leaks, some unusual crashes and some race conditions.
+      o Fixes for smaller building problems.
+      o Updates of manuals, FAQ and other instructive documents.
+
+  Major changes between OpenSSL 0.9.6f and OpenSSL 0.9.6g:
+
+      o Important building fixes on Unix.
+
+  Major changes between OpenSSL 0.9.6e and OpenSSL 0.9.6f:
+
+      o Various important bugfixes.
+
+  Major changes between OpenSSL 0.9.6d and OpenSSL 0.9.6e:
+
+      o Important security related bugfixes.
+      o Various SSL/TLS library bugfixes.
+
+  Major changes between OpenSSL 0.9.6c and OpenSSL 0.9.6d:
+
+      o Various SSL/TLS library bugfixes.
+      o Fix DH parameter generation for 'non-standard' generators.
+
+  Major changes between OpenSSL 0.9.6b and OpenSSL 0.9.6c:
+
+      o Various SSL/TLS library bugfixes.
+      o BIGNUM library fixes.
+      o RSA OAEP and random number generation fixes.
+      o Object identifiers corrected and added.
+      o Add assembler BN routines for IA64.
+      o Add support for OS/390 Unix, UnixWare with gcc, OpenUNIX 8,
+        MIPS Linux; shared library support for Irix, HP-UX.
+      o Add crypto accelerator support for AEP, Baltimore SureWare,
+        Broadcom and Cryptographic Appliance's keyserver
+        [in 0.9.6c-engine release].
+
+  Major changes between OpenSSL 0.9.6a and OpenSSL 0.9.6b:
+
+      o Security fix: PRNG improvements.
+      o Security fix: RSA OAEP check.
+      o Security fix: Reinsert and fix countermeasure to Bleichbacher's
+        attack.
+      o MIPS bug fix in BIGNUM.
+      o Bug fix in "openssl enc".
+      o Bug fix in X.509 printing routine.
+      o Bug fix in DSA verification routine and DSA S/MIME verification.
+      o Bug fix to make PRNG thread-safe.
+      o Bug fix in RAND_file_name().
+      o Bug fix in compatibility mode trust settings.
+      o Bug fix in blowfish EVP.
+      o Increase default size for BIO buffering filter.
+      o Compatibility fixes in some scripts.
+
+  Major changes between OpenSSL 0.9.6 and OpenSSL 0.9.6a:
+
+      o Security fix: change behavior of OpenSSL to avoid using
+        environment variables when running as root.
+      o Security fix: check the result of RSA-CRT to reduce the
+        possibility of deducing the private key from an incorrectly
+        calculated signature.
+      o Security fix: prevent Bleichenbacher's DSA attack.
+      o Security fix: Zero the premaster secret after deriving the
+        master secret in DH ciphersuites.
+      o Reimplement SSL_peek(), which had various problems.
+      o Compatibility fix: the function des_encrypt() renamed to
+        des_encrypt1() to avoid clashes with some Unixen libc.
+      o Bug fixes for Win32, HP/UX and Irix.
+      o Bug fixes in BIGNUM, SSL, PKCS#7, PKCS#12, X.509, CONF and
+        memory checking routines.
+      o Bug fixes for RSA operations in threaded environments.
+      o Bug fixes in misc. openssl applications.
+      o Remove a few potential memory leaks.
+      o Add tighter checks of BIGNUM routines.
+      o Shared library support has been reworked for generality.
+      o More documentation.
+      o New function BN_rand_range().
+      o Add "-rand" option to openssl s_client and s_server.
+
+  Major changes between OpenSSL 0.9.5a and OpenSSL 0.9.6:
+
+      o Some documentation for BIO and SSL libraries.
+      o Enhanced chain verification using key identifiers.
+      o New sign and verify options to 'dgst' application.
+      o Support for DER and PEM encoded messages in 'smime' application.
+      o New 'rsautl' application, low level RSA utility.
+      o MD4 now included.
+      o Bugfix for SSL rollback padding check.
+      o Support for external crypto devices [1].
+      o Enhanced EVP interface.
+
+    [1] The support for external crypto devices is currently a separate
+        distribution.  See the file README.ENGINE.
+
+  Major changes between OpenSSL 0.9.5 and OpenSSL 0.9.5a:
+
+      o Bug fixes for Win32, SuSE Linux, NeXTSTEP and FreeBSD 2.2.8 
+      o Shared library support for HPUX and Solaris-gcc
+      o Support of Linux/IA64
+      o Assembler support for Mingw32
+      o New 'rand' application
+      o New way to check for existence of algorithms from scripts
+
+  Major changes between OpenSSL 0.9.4 and OpenSSL 0.9.5:
+
+      o S/MIME support in new 'smime' command
+      o Documentation for the OpenSSL command line application
+      o Automation of 'req' application
+      o Fixes to make s_client, s_server work under Windows
+      o Support for multiple fieldnames in SPKACs
+      o New SPKAC command line utilty and associated library functions
+      o Options to allow passwords to be obtained from various sources
+      o New public key PEM format and options to handle it
+      o Many other fixes and enhancements to command line utilities
+      o Usable certificate chain verification
+      o Certificate purpose checking
+      o Certificate trust settings
+      o Support of authority information access extension
+      o Extensions in certificate requests
+      o Simplified X509 name and attribute routines
+      o Initial (incomplete) support for international character sets
+      o New DH_METHOD, DSA_METHOD and enhanced RSA_METHOD
+      o Read only memory BIOs and simplified creation function
+      o TLS/SSL protocol bugfixes: Accept TLS 'client hello' in SSL 3.0
+        record; allow fragmentation and interleaving of handshake and other
+        data
+      o TLS/SSL code now "tolerates" MS SGC
+      o Work around for Netscape client certificate hang bug
+      o RSA_NULL option that removes RSA patent code but keeps other
+        RSA functionality
+      o Memory leak detection now allows applications to add extra information
+        via a per-thread stack
+      o PRNG robustness improved
+      o EGD support
+      o BIGNUM library bug fixes
+      o Faster DSA parameter generation
+      o Enhanced support for Alpha Linux
+      o Experimental MacOS support
+
   Major changes between OpenSSL 0.9.3 and OpenSSL 0.9.4:
 
       o Transparent support for PKCS#8 format private keys: these are used

Netware/build.bat

@@ -0,0 +1,235 @@
+@echo off
+
+rem ========================================================================
+rem   Batch file to automate building OpenSSL for NetWare.
+rem
+rem   usage:
+rem      build [target] [debug opts] [assembly opts] [configure opts]
+rem
+rem      target        - "netware-clib" - CLib NetWare build (WinSock Sockets)
+rem                    - "netware-clib-bsdsock" - CLib NetWare build (BSD Sockets)
+rem                    - "netware-libc" - LibC NetWare build (WinSock Sockets)
+rem                    - "netware-libc-bsdsock" - LibC NetWare build (BSD Sockets)
+rem 
+rem      debug opts    - "debug"  - build debug
+rem
+rem      assembly opts - "nw-mwasm" - use Metrowerks assembler
+rem                    - "nw-nasm"  - use NASM assembler
+rem                    - "no-asm"   - don't use assembly
+rem
+rem      configure opts- all unrecognized arguments are passed to the
+rem                       perl configure script
+rem
+rem   If no arguments are specified the default is to build non-debug with
+rem   no assembly.  NOTE: there is no default BLD_TARGET.
+rem
+
+
+
+rem   No assembly is the default - Uncomment section below to change
+rem   the assembler default
+set ASM_MODE=
+set ASSEMBLER=
+set NO_ASM=no-asm
+
+rem   Uncomment to default to the Metrowerks assembler
+rem set ASM_MODE=nw-mwasm
+rem set ASSEMBLER=Metrowerks
+rem set NO_ASM=
+
+rem   Uncomment to default to the NASM assembler
+rem set ASM_MODE=nw-nasm
+rem set ASSEMBLER=NASM
+rem set NO_ASM=
+
+rem   No default Bld target
+set BLD_TARGET=no_target
+rem set BLD_TARGET=netware-clib
+rem set BLD_TARGET=netware-libc
+
+
+rem   Default to build non-debug
+set DEBUG=
+                                    
+rem   Uncomment to default to debug build
+rem set DEBUG=debug
+
+
+set CONFIG_OPTS=
+set ARG_PROCESSED=NO
+
+
+rem   Process command line args
+:opts
+if "a%1" == "a" goto endopt
+if "%1" == "no-asm"   set NO_ASM=no-asm
+if "%1" == "no-asm"   set ARG_PROCESSED=YES
+if "%1" == "debug"    set DEBUG=debug
+if "%1" == "debug"    set ARG_PROCESSED=YES
+if "%1" == "nw-nasm"  set ASM_MODE=nw-nasm
+if "%1" == "nw-nasm"  set ASSEMBLER=NASM
+if "%1" == "nw-nasm"  set NO_ASM=
+if "%1" == "nw-nasm"  set ARG_PROCESSED=YES
+if "%1" == "nw-mwasm" set ASM_MODE=nw-mwasm
+if "%1" == "nw-mwasm" set ASSEMBLER=Metrowerks
+if "%1" == "nw-mwasm" set NO_ASM=
+if "%1" == "nw-mwasm" set ARG_PROCESSED=YES
+if "%1" == "netware-clib" set BLD_TARGET=netware-clib
+if "%1" == "netware-clib" set ARG_PROCESSED=YES
+if "%1" == "netware-clib-bsdsock" set BLD_TARGET=netware-clib-bsdsock
+if "%1" == "netware-clib-bsdsock" set ARG_PROCESSED=YES
+if "%1" == "netware-libc" set BLD_TARGET=netware-libc
+if "%1" == "netware-libc" set ARG_PROCESSED=YES
+if "%1" == "netware-libc-bsdsock" set BLD_TARGET=netware-libc-bsdsock
+if "%1" == "netware-libc-bsdsock" set ARG_PROCESSED=YES
+
+rem   If we didn't recognize the argument, consider it an option for config
+if "%ARG_PROCESSED%" == "NO" set CONFIG_OPTS=%CONFIG_OPTS% %1
+if "%ARG_PROCESSED%" == "YES" set ARG_PROCESSED=NO
+
+shift
+goto opts
+:endopt
+
+rem make sure a valid BLD_TARGET was specified
+if "%BLD_TARGET%" == "no_target" goto no_target
+
+rem build the nlm make file name which includes target and debug info
+set NLM_MAKE=
+if "%BLD_TARGET%" == "netware-clib" set NLM_MAKE=netware\nlm_clib
+if "%BLD_TARGET%" == "netware-clib-bsdsock" set NLM_MAKE=netware\nlm_clib_bsdsock
+if "%BLD_TARGET%" == "netware-libc" set NLM_MAKE=netware\nlm_libc
+if "%BLD_TARGET%" == "netware-libc-bsdsock" set NLM_MAKE=netware\nlm_libc_bsdsock
+if "%DEBUG%" == "" set NLM_MAKE=%NLM_MAKE%.mak
+if "%DEBUG%" == "debug" set NLM_MAKE=%NLM_MAKE%_dbg.mak
+
+if "%NO_ASM%" == "no-asm" set ASM_MODE=
+if "%NO_ASM%" == "no-asm" set ASSEMBLER=
+if "%NO_ASM%" == "no-asm" set CONFIG_OPTS=%CONFIG_OPTS% no-asm
+if "%NO_ASM%" == "no-asm" goto do_config
+
+
+rem ==================================================
+echo Generating x86 for %ASSEMBLER% assembler
+
+echo Bignum
+cd crypto\bn\asm
+rem perl x86.pl %ASM_MODE% > bn-nw.asm
+perl bn-586.pl %ASM_MODE% > bn-nw.asm
+perl co-586.pl %ASM_MODE% > co-nw.asm
+cd ..\..\..
+
+echo AES
+cd crypto\aes\asm
+perl aes-586.pl %ASM_MODE% > a-nw.asm
+cd ..\..\..
+
+echo DES
+cd crypto\des\asm
+perl des-586.pl %ASM_MODE% > d-nw.asm
+cd ..\..\..
+
+echo "crypt(3)"
+
+cd crypto\des\asm
+perl crypt586.pl %ASM_MODE% > y-nw.asm
+cd ..\..\..
+
+echo Blowfish
+
+cd crypto\bf\asm
+perl bf-586.pl %ASM_MODE% > b-nw.asm
+cd ..\..\..
+
+echo CAST5
+cd crypto\cast\asm
+perl cast-586.pl %ASM_MODE% > c-nw.asm
+cd ..\..\..
+
+echo RC4
+cd crypto\rc4\asm
+perl rc4-586.pl %ASM_MODE% > r4-nw.asm
+cd ..\..\..
+
+echo MD5
+cd crypto\md5\asm
+perl md5-586.pl %ASM_MODE% > m5-nw.asm
+cd ..\..\..
+
+echo SHA1
+cd crypto\sha\asm
+perl sha1-586.pl %ASM_MODE% > s1-nw.asm
+perl sha256-586.pl %ASM_MODE% > sha256-nw.asm
+perl sha512-586.pl %ASM_MODE% > sha512-nw.asm
+cd ..\..\..
+
+echo RIPEMD160
+cd crypto\ripemd\asm
+perl rmd-586.pl %ASM_MODE% > rm-nw.asm
+cd ..\..\..
+
+echo RC5\32
+cd crypto\rc5\asm
+perl rc5-586.pl %ASM_MODE% > r5-nw.asm
+cd ..\..\..
+
+echo WHIRLPOOL
+cd crypto\whrlpool\asm
+perl wp-mmx.pl %ASM_MODE% > wp-nw.asm
+cd ..\..\..
+
+echo CPUID
+cd crypto
+perl x86cpuid.pl %ASM_MODE% > x86cpuid-nw.asm
+cd ..\
+
+rem ===============================================================
+rem
+:do_config
+
+echo .
+echo configure options: %CONFIG_OPTS% %BLD_TARGET%
+echo .
+perl configure %CONFIG_OPTS% %BLD_TARGET%
+
+perl util\mkfiles.pl >MINFO
+
+echo .
+echo mk1mf.pl options: %DEBUG% %ASM_MODE% %CONFIG_OPTS% %BLD_TARGET%
+echo .
+perl util\mk1mf.pl %DEBUG% %ASM_MODE% %CONFIG_OPTS% %BLD_TARGET% >%NLM_MAKE%
+
+make -f %NLM_MAKE% vclean
+echo .
+echo The makefile "%NLM_MAKE%" has been created use your maketool to
+echo build (ex: make -f %NLM_MAKE%)
+goto end
+
+rem ===============================================================
+rem
+:no_target
+echo .
+echo .  No build target specified!!!
+echo .
+echo .  usage: build [target] [debug opts] [assembly opts] [configure opts]
+echo .
+echo .     target        - "netware-clib" - CLib NetWare build (WinSock Sockets)
+echo .                   - "netware-clib-bsdsock" - CLib NetWare build (BSD Sockets)
+echo .                   - "netware-libc" - LibC NetWare build (WinSock Sockets)
+echo .                   - "netware-libc-bsdsock" - LibC NetWare build (BSD Sockets)
+echo .
+echo .     debug opts    - "debug"  - build debug
+echo .
+echo .     assembly opts - "nw-mwasm" - use Metrowerks assembler
+echo .                     "nw-nasm"  - use NASM assembler
+echo .                     "no-asm"   - don't use assembly
+echo .
+echo .     configure opts- all unrecognized arguments are passed to the
+echo .                      perl configure script
+echo .
+echo .  If no debug or assembly opts are specified the default is to build
+echo .  non-debug without assembly
+echo .
+
+        
+:end        

Netware/cpy_tests.bat

@@ -0,0 +1,113 @@
+@echo off
+
+rem   Batch file to copy OpenSSL stuff to a NetWare server for testing
+
+rem   This batch file will create an "opensssl" directory at the root of the
+rem   specified NetWare drive and copy the required files to run the tests.
+rem   It should be run from inside the "openssl\netware" subdirectory.
+
+rem   Usage:
+rem      cpy_tests.bat <test subdirectory> <NetWare drive>
+rem          <test subdirectory> - out_nw.dbg | out_nw
+rem          <NetWare drive> - any mapped drive letter
+rem
+rem      example ( copy from debug build to m: dirve ):
+rem              cpy_tests.bat out_nw.dbg m:
+rem
+rem      CAUTION:  If a directory named OpenSSL exists on the target drive
+rem                it will be deleted first.
+
+
+if "%1" == "" goto usage
+if "%2" == "" goto usage
+
+rem   Assume running in \openssl directory unless cpy_tests.bat exists then
+rem   it must be the \openssl\netware directory
+set loc=.
+if exist cpy_tests.bat set loc=..
+
+rem   make sure the local build subdirectory specified is valid
+if not exist %loc%\%1\NUL goto invalid_dir
+
+rem   make sure target drive is valid
+if not exist %2\NUL goto invalid_drive
+
+rem   If an OpenSSL directory exists on the target drive, remove it
+if exist %2\openssl\NUL goto remove_openssl
+goto do_copy
+
+:remove_openssl
+echo .
+echo OpenSSL directory exists on %2 - it will be removed!
+pause
+rmdir %2\openssl /s /q
+
+:do_copy
+rem   make an "openssl" directory and others at the root of the NetWare drive
+mkdir %2\openssl
+mkdir %2\openssl\test_out
+mkdir %2\openssl\apps
+mkdir %2\openssl\certs
+mkdir %2\openssl\test
+
+
+rem   copy the test nlms
+copy %loc%\%1\*.nlm %2\openssl\
+
+rem   copy the test perl script
+copy %loc%\netware\do_tests.pl %2\openssl\
+
+rem   copy the certs directory stuff
+xcopy %loc%\certs\*.*         %2\openssl\certs\ /s
+
+rem   copy the test directory stuff
+copy %loc%\test\CAss.cnf      %2\openssl\test\
+copy %loc%\test\Uss.cnf       %2\openssl\test\
+copy %loc%\test\pkcs7.pem     %2\openssl\test\
+copy %loc%\test\pkcs7-1.pem   %2\openssl\test\
+copy %loc%\test\testcrl.pem   %2\openssl\test\
+copy %loc%\test\testp7.pem    %2\openssl\test\
+copy %loc%\test\testreq2.pem  %2\openssl\test\
+copy %loc%\test\testrsa.pem   %2\openssl\test\
+copy %loc%\test\testsid.pem   %2\openssl\test\
+copy %loc%\test\testx509.pem  %2\openssl\test\
+copy %loc%\test\v3-cert1.pem  %2\openssl\test\
+copy %loc%\test\v3-cert2.pem  %2\openssl\test\
+copy %loc%\crypto\evp\evptests.txt %2\openssl\test\
+
+rem   copy the apps directory stuff
+copy %loc%\apps\client.pem    %2\openssl\apps\
+copy %loc%\apps\server.pem    %2\openssl\apps\
+copy %loc%\apps\openssl.cnf   %2\openssl\apps\
+
+echo .
+echo Tests copied
+echo Run the test script at the console by typing:
+echo     "Perl \openssl\do_tests.pl"
+echo .
+echo Make sure the Search path includes the OpenSSL subdirectory
+
+goto end
+
+:invalid_dir
+echo.
+echo Invalid build directory specified: %1
+echo.
+goto usage
+
+:invalid_drive
+echo.
+echo Invalid drive: %2
+echo.
+goto usage
+
+:usage
+echo.
+echo usage: cpy_tests.bat [test subdirectory] [NetWare drive]
+echo     [test subdirectory] - out_nw_clib.dbg, out_nw_libc.dbg, etc. 
+echo     [NetWare drive]     - any mapped drive letter
+echo.
+echo example: cpy_test out_nw_clib.dbg M:
+echo  (copy from clib debug build area to M: drive)
+
+:end

Netware/do_tests.pl

@@ -0,0 +1,624 @@
+# perl script to run OpenSSL tests
+
+
+my $base_path      = "\\openssl";
+
+my $output_path    = "$base_path\\test_out";
+my $cert_path      = "$base_path\\certs";
+my $test_path      = "$base_path\\test";
+my $app_path       = "$base_path\\apps";
+
+my $tmp_cert       = "$output_path\\cert.tmp";
+my $OpenSSL_config = "$app_path\\openssl.cnf";
+my $log_file       = "$output_path\\tests.log";
+
+my $pause = 0;
+
+
+#  process the command line args to see if they wanted us to pause
+#  between executing each command
+foreach $i (@ARGV)
+{
+   if ($i =~ /^-p$/)
+   { $pause=1; }
+}
+
+
+
+main();
+
+
+############################################################################
+sub main()
+{
+   # delete all the output files in the output directory
+   unlink <$output_path\\*.*>;
+
+   # open the main log file
+   open(OUT, ">$log_file") || die "unable to open $log_file\n";
+
+   print( OUT "========================================================\n");
+   my $outFile = "$output_path\\version.out";
+   system("openssl2 version (CLIB_OPT)/>$outFile");
+   log_output("CHECKING FOR OPENSSL VERSION:", $outFile);
+
+   algorithm_tests();
+   encryption_tests();
+   evp_tests();
+   pem_tests();
+   verify_tests();
+   ca_tests();
+   ssl_tests();
+
+   close(OUT);
+
+   print("\nCompleted running tests.\n\n");
+   print("Check log file for errors: $log_file\n");
+}
+
+############################################################################
+sub algorithm_tests
+{
+   my $i;
+   my $outFile;
+   my @tests = ( rsa_test, destest, ideatest, bftest, bntest, shatest, sha1test,
+                 sha256t, sha512t, dsatest, md2test, md4test, md5test, mdc2test,
+                 rc2test, rc4test, rc5test, randtest, rmdtest, dhtest, ecdhtest,
+                 ecdsatest, ectest, exptest, casttest, hmactest );
+
+   print( "\nRUNNING CRYPTO ALGORITHM TESTS:\n\n");
+
+   print( OUT "\n========================================================\n");
+   print( OUT "CRYPTO ALGORITHM TESTS:\n\n");
+
+   foreach $i (@tests)
+   {
+      if (-e "$base_path\\$i.nlm")
+      {
+         $outFile = "$output_path\\$i.out";
+         system("$i (CLIB_OPT)/>$outFile");
+         log_desc("Test: $i\.nlm:");
+         log_output("", $outFile );
+      }
+      else
+      {
+         log_desc("Test: $i\.nlm: file not found");
+      }
+   }
+}
+
+############################################################################
+sub encryption_tests
+{
+   my $i;
+   my $outFile;
+   my @enc_tests = ( "enc", "rc4", "des-cfb", "des-ede-cfb", "des-ede3-cfb",
+                     "des-ofb", "des-ede-ofb", "des-ede3-ofb",
+                     "des-ecb", "des-ede", "des-ede3", "des-cbc",
+                     "des-ede-cbc", "des-ede3-cbc", "idea-ecb", "idea-cfb",
+                     "idea-ofb", "idea-cbc", "rc2-ecb", "rc2-cfb",
+                     "rc2-ofb", "rc2-cbc", "bf-ecb", "bf-cfb",
+                     "bf-ofb", "bf-cbc" );
+
+   my $input = "$base_path\\do_tests.pl";
+   my $cipher = "$output_path\\cipher.out";
+   my $clear = "$output_path\\clear.out";
+
+   print( "\nRUNNING ENCRYPTION & DECRYPTION TESTS:\n\n");
+
+   print( OUT "\n========================================================\n");
+   print( OUT "FILE ENCRYPTION & DECRYPTION TESTS:\n\n");
+
+   foreach $i (@enc_tests)
+   {
+      log_desc("Testing: $i");
+
+      # do encryption
+      $outFile = "$output_path\\enc.out";
+      system("openssl2 $i -e -bufsize 113 -k test -in $input -out $cipher (CLIB_OPT)/>$outFile" );
+      log_output("Encrypting: $input --> $cipher", $outFile);
+
+      # do decryption
+      $outFile = "$output_path\\dec.out";
+      system("openssl2 $i -d -bufsize 157 -k test -in $cipher -out $clear (CLIB_OPT)/>$outFile");
+      log_output("Decrypting: $cipher --> $clear", $outFile);
+
+      # compare files
+      $x = compare_files( $input, $clear, 1);
+      if ( $x == 0 )
+      {
+         print( "\rSUCCESS - files match: $input, $clear\n");
+         print( OUT "SUCCESS - files match: $input, $clear\n");
+      }
+      else
+      {
+         print( "\rERROR: files don't match\n");
+         print( OUT "ERROR: files don't match\n");
+      }
+
+      do_wait();
+
+      # Now do the same encryption but use Base64
+
+      # do encryption B64
+      $outFile = "$output_path\\B64enc.out";
+      system("openssl2 $i -a -e -bufsize 113 -k test -in $input -out $cipher (CLIB_OPT)/>$outFile");
+      log_output("Encrypting(B64): $cipher --> $clear", $outFile);
+
+      # do decryption B64
+      $outFile = "$output_path\\B64dec.out";
+      system("openssl2 $i -a -d -bufsize 157 -k test -in $cipher -out $clear (CLIB_OPT)/>$outFile");
+      log_output("Decrypting(B64): $cipher --> $clear", $outFile);
+
+      # compare files
+      $x = compare_files( $input, $clear, 1);
+      if ( $x == 0 )
+      {
+         print( "\rSUCCESS - files match: $input, $clear\n");
+         print( OUT "SUCCESS - files match: $input, $clear\n");
+      }
+      else
+      {
+         print( "\rERROR: files don't match\n");
+         print( OUT "ERROR: files don't match\n");
+      }
+
+      do_wait();
+
+   } # end foreach
+
+   # delete the temporary files
+   unlink($cipher);
+   unlink($clear);
+}
+
+
+############################################################################
+sub pem_tests
+{
+   my $i;
+   my $tmp_out;
+   my $outFile = "$output_path\\pem.out";
+
+   my %pem_tests = (
+         "crl"      => "testcrl.pem",
+          "pkcs7"   => "testp7.pem",
+          "req"     => "testreq2.pem",
+          "rsa"     => "testrsa.pem",
+          "x509"    => "testx509.pem",
+          "x509"    => "v3-cert1.pem",
+          "sess_id" => "testsid.pem"  );
+
+
+   print( "\nRUNNING PEM TESTS:\n\n");
+
+   print( OUT "\n========================================================\n");
+   print( OUT "PEM TESTS:\n\n");
+
+   foreach $i (keys(%pem_tests))
+   {
+      log_desc( "Testing: $i");
+
+      my $input = "$test_path\\$pem_tests{$i}";
+
+      $tmp_out = "$output_path\\$pem_tests{$i}";
+
+      if ($i ne "req" )
+      {
+         system("openssl2 $i -in $input -out $tmp_out (CLIB_OPT)/>$outFile");
+         log_output( "openssl2 $i -in $input -out $tmp_out", $outFile);
+      }
+      else
+      {
+         system("openssl2 $i -in $input -out $tmp_out -config $OpenSSL_config (CLIB_OPT)/>$outFile");
+         log_output( "openssl2 $i -in $input -out $tmp_out -config $OpenSSL_config", $outFile );
+      }
+
+      $x = compare_files( $input, $tmp_out);
+      if ( $x == 0 )
+      {
+         print( "\rSUCCESS - files match: $input, $tmp_out\n");
+         print( OUT "SUCCESS - files match: $input, $tmp_out\n");
+      }
+      else
+      {
+         print( "\rERROR: files don't match\n");
+         print( OUT "ERROR: files don't match\n");
+      }
+      do_wait();
+
+   } # end foreach
+}
+
+
+############################################################################
+sub verify_tests
+{
+   my $i;
+   my $outFile = "$output_path\\verify.out";
+
+   $cert_path =~ s/\\/\//g;
+   my @cert_files = <$cert_path/*.pem>;
+
+   print( "\nRUNNING VERIFY TESTS:\n\n");
+
+   print( OUT "\n========================================================\n");
+   print( OUT "VERIFY TESTS:\n\n");
+
+   make_tmp_cert_file();
+
+   foreach $i (@cert_files)
+   {
+      system("openssl2 verify -CAfile $tmp_cert $i (CLIB_OPT)/>$outFile");
+      log_desc("Verifying cert: $i");
+      log_output("openssl2 verify -CAfile $tmp_cert $i", $outFile);
+   }
+}
+
+
+############################################################################
+sub ssl_tests
+{
+   my $outFile = "$output_path\\ssl_tst.out";
+   my($CAcert) = "$output_path\\certCA.ss";
+   my($Ukey)   = "$output_path\\keyU.ss";
+   my($Ucert)  = "$output_path\\certU.ss";
+   my($ssltest)= "ssltest -key $Ukey -cert $Ucert -c_key $Ukey -c_cert $Ucert -CAfile $CAcert";
+
+   print( "\nRUNNING SSL TESTS:\n\n");
+
+   print( OUT "\n========================================================\n");
+   print( OUT "SSL TESTS:\n\n");
+
+   system("ssltest -ssl2 (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2:");
+   log_output("ssltest -ssl2", $outFile);
+
+   system("$ssltest -ssl2 -server_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2 with server authentication:");
+   log_output("$ssltest -ssl2 -server_auth", $outFile);
+
+   system("$ssltest -ssl2 -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2 with client authentication:");
+   log_output("$ssltest -ssl2 -client_auth", $outFile);
+
+   system("$ssltest -ssl2 -server_auth -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2 with both client and server authentication:");
+   log_output("$ssltest -ssl2 -server_auth -client_auth", $outFile);
+
+   system("ssltest -ssl3 (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv3:");
+   log_output("ssltest -ssl3", $outFile);
+
+   system("$ssltest -ssl3 -server_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv3 with server authentication:");
+   log_output("$ssltest -ssl3 -server_auth", $outFile);
+
+   system("$ssltest -ssl3 -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv3 with client authentication:");
+   log_output("$ssltest -ssl3 -client_auth", $outFile);
+
+   system("$ssltest -ssl3 -server_auth -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv3 with both client and server authentication:");
+   log_output("$ssltest -ssl3 -server_auth -client_auth", $outFile);
+
+   system("ssltest (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2/sslv3:");
+   log_output("ssltest", $outFile);
+
+   system("$ssltest -server_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2/sslv3 with server authentication:");
+   log_output("$ssltest -server_auth", $outFile);
+
+   system("$ssltest -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2/sslv3 with client authentication:");
+   log_output("$ssltest -client_auth ", $outFile);
+
+   system("$ssltest -server_auth -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2/sslv3 with both client and server authentication:");
+   log_output("$ssltest -server_auth -client_auth", $outFile);
+
+   system("ssltest -bio_pair -ssl2 (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2 via BIO pair:");
+   log_output("ssltest -bio_pair -ssl2", $outFile);
+
+   system("ssltest -bio_pair -dhe1024dsa -v (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2/sslv3 with 1024 bit DHE via BIO pair:");
+   log_output("ssltest -bio_pair -dhe1024dsa -v", $outFile);
+
+   system("$ssltest -bio_pair -ssl2 -server_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2 with server authentication via BIO pair:");
+   log_output("$ssltest -bio_pair -ssl2 -server_auth", $outFile);
+
+   system("$ssltest -bio_pair -ssl2 -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2 with client authentication via BIO pair:");
+   log_output("$ssltest -bio_pair -ssl2 -client_auth", $outFile);
+
+   system("$ssltest -bio_pair -ssl2 -server_auth -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2 with both client and server authentication via BIO pair:");
+   log_output("$ssltest -bio_pair -ssl2 -server_auth -client_auth", $outFile);
+
+   system("ssltest -bio_pair -ssl3 (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv3 via BIO pair:");
+   log_output("ssltest -bio_pair -ssl3", $outFile);
+
+   system("$ssltest -bio_pair -ssl3 -server_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv3 with server authentication via BIO pair:");
+   log_output("$ssltest -bio_pair -ssl3 -server_auth", $outFile);
+
+   system("$ssltest -bio_pair -ssl3 -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv3 with client authentication  via BIO pair:");
+   log_output("$ssltest -bio_pair -ssl3 -client_auth", $outFile);
+
+   system("$ssltest -bio_pair -ssl3 -server_auth -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv3 with both client and server authentication via BIO pair:");
+   log_output("$ssltest -bio_pair -ssl3 -server_auth -client_auth", $outFile);
+
+   system("ssltest -bio_pair (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2/sslv3 via BIO pair:");
+   log_output("ssltest -bio_pair", $outFile);
+
+   system("$ssltest -bio_pair -server_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2/sslv3 with server authentication via BIO pair:");
+   log_output("$ssltest -bio_pair -server_auth", $outFile);
+
+   system("$ssltest -bio_pair -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2/sslv3 with client authentication via BIO pair:");
+   log_output("$ssltest -bio_pair -client_auth", $outFile);
+
+   system("$ssltest -bio_pair -server_auth -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2/sslv3 with both client and server authentication via BIO pair:");
+   log_output("$ssltest -bio_pair -server_auth -client_auth", $outFile);
+}
+
+
+############################################################################
+sub ca_tests
+{
+   my $outFile = "$output_path\\ca_tst.out";
+
+   my($CAkey)     = "$output_path\\keyCA.ss";
+   my($CAcert)    = "$output_path\\certCA.ss";
+   my($CAserial)  = "$output_path\\certCA.srl";
+   my($CAreq)     = "$output_path\\reqCA.ss";
+   my($CAreq2)    = "$output_path\\req2CA.ss";
+
+   my($CAconf)    = "$test_path\\CAss.cnf";
+
+   my($Uconf)     = "$test_path\\Uss.cnf";
+
+   my($Ukey)      = "$output_path\\keyU.ss";
+   my($Ureq)      = "$output_path\\reqU.ss";
+   my($Ucert)     = "$output_path\\certU.ss";
+
+   print( "\nRUNNING CA TESTS:\n\n");
+
+   print( OUT "\n========================================================\n");
+   print( OUT "CA TESTS:\n");
+
+   system("openssl2 req -config $CAconf -out $CAreq -keyout $CAkey -new (CLIB_OPT)/>$outFile");
+   log_desc("Make a certificate request using req:");
+   log_output("openssl2 req -config $CAconf -out $CAreq -keyout $CAkey -new", $outFile);
+
+   system("openssl2 x509 -CAcreateserial -in $CAreq -days 30 -req -out $CAcert -signkey $CAkey (CLIB_OPT)/>$outFile");
+   log_desc("Convert the certificate request into a self signed certificate using x509:");
+   log_output("openssl2 x509 -CAcreateserial -in $CAreq -days 30 -req -out $CAcert -signkey $CAkey", $outFile);
+
+   system("openssl2 x509 -in $CAcert -x509toreq -signkey $CAkey -out $CAreq2 (CLIB_OPT)/>$outFile");
+   log_desc("Convert a certificate into a certificate request using 'x509':");
+   log_output("openssl2 x509 -in $CAcert -x509toreq -signkey $CAkey -out $CAreq2", $outFile);
+
+   system("openssl2 req -config $OpenSSL_config -verify -in $CAreq -noout (CLIB_OPT)/>$outFile");
+   log_output("openssl2 req -config $OpenSSL_config -verify -in $CAreq -noout", $outFile);
+
+   system("openssl2 req -config $OpenSSL_config -verify -in $CAreq2 -noout (CLIB_OPT)/>$outFile");
+   log_output( "openssl2 req -config $OpenSSL_config -verify -in $CAreq2 -noout", $outFile);
+
+   system("openssl2 verify -CAfile $CAcert $CAcert (CLIB_OPT)/>$outFile");
+   log_output("openssl2 verify -CAfile $CAcert $CAcert", $outFile);
+
+   system("openssl2 req -config $Uconf -out $Ureq -keyout $Ukey -new (CLIB_OPT)/>$outFile");
+   log_desc("Make another certificate request using req:");
+   log_output("openssl2 req -config $Uconf -out $Ureq -keyout $Ukey -new", $outFile);
+
+   system("openssl2 x509 -CAcreateserial -in $Ureq -days 30 -req -out $Ucert -CA $CAcert -CAkey $CAkey -CAserial $CAserial (CLIB_OPT)/>$outFile");
+   log_desc("Sign certificate request with the just created CA via x509:");
+   log_output("openssl2 x509 -CAcreateserial -in $Ureq -days 30 -req -out $Ucert -CA $CAcert -CAkey $CAkey -CAserial $CAserial", $outFile);
+
+   system("openssl2 verify -CAfile $CAcert $Ucert (CLIB_OPT)/>$outFile");
+   log_output("openssl2 verify -CAfile $CAcert $Ucert", $outFile);
+
+   system("openssl2 x509 -subject -issuer -startdate -enddate -noout -in $Ucert (CLIB_OPT)/>$outFile");
+   log_desc("Certificate details");
+   log_output("openssl2 x509 -subject -issuer -startdate -enddate -noout -in $Ucert", $outFile);
+
+   print(OUT "--\n");
+   print(OUT "The generated CA certificate is $CAcert\n");
+   print(OUT "The generated CA private key is $CAkey\n");
+   print(OUT "The current CA signing serial number is in $CAserial\n");
+
+   print(OUT "The generated user certificate is $Ucert\n");
+   print(OUT "The generated user private key is $Ukey\n");
+   print(OUT "--\n");
+}
+
+############################################################################
+sub evp_tests
+{
+   my $i = 'evp_test';
+
+   print( "\nRUNNING EVP TESTS:\n\n");
+
+   print( OUT "\n========================================================\n");
+   print( OUT "EVP TESTS:\n\n");
+
+   if (-e "$base_path\\$i.nlm")
+   {
+       my $outFile = "$output_path\\$i.out";
+       system("$i $test_path\\evptests.txt (CLIB_OPT)/>$outFile");
+       log_desc("Test: $i\.nlm:");
+       log_output("", $outFile );
+   }
+   else
+   {
+       log_desc("Test: $i\.nlm: file not found");
+   }
+}
+
+############################################################################
+sub log_output( $ $ )
+{
+   my( $desc, $file ) = @_;
+   my($error) = 0;
+   my($key);
+   my($msg);
+
+   if ($desc)
+   {
+      print("\r$desc\n");
+      print(OUT "$desc\n");
+   }
+
+      # loop waiting for test program to complete
+   while ( stat($file) == 0)
+      { print(". "); sleep(1); }
+
+
+      # copy test output to log file
+   open(IN, "<$file");
+   while (<IN>)
+   {
+      print(OUT $_);
+      if ( $_ =~ /ERROR/ )
+      {
+         $error = 1;
+      }
+   }
+      # close and delete the temporary test output file
+   close(IN);
+   unlink($file);
+
+   if ( $error == 0 )
+   {
+      $msg = "Test Succeeded";
+   }
+   else
+   {
+      $msg = "Test Failed";
+   }
+
+   print(OUT "$msg\n");
+
+   if ($pause)
+   {
+      print("$msg - press ENTER to continue...");
+      $key = getc;
+      print("\n");
+   }
+
+      # Several of the testing scripts run a loop loading the
+      # same NLM with different options.
+      # On slow NetWare machines there appears to be some delay in the
+      # OS actually unloading the test nlms and the OS complains about.
+      # the NLM already being loaded.  This additional pause is to
+      # to help provide a little more time for unloading before trying to
+      # load again.
+   sleep(1);
+}
+
+
+############################################################################
+sub log_desc( $ )
+{
+   my( $desc ) = @_;
+
+   print("\n");
+   print("$desc\n");
+
+   print(OUT "\n");
+   print(OUT "$desc\n");
+   print(OUT "======================================\n");
+}
+
+############################################################################
+sub compare_files( $ $ $ )
+{
+   my( $file1, $file2, $binary ) = @_;
+   my( $n1, $n2, $b1, $b2 );
+   my($ret) = 1;
+
+   open(IN0, $file1) || die "\nunable to open $file1\n";
+   open(IN1, $file2) || die "\nunable to open $file2\n";
+
+  if ($binary)
+  {
+      binmode IN0;
+      binmode IN1;
+  }
+
+   for (;;)
+   {
+      $n1 = read(IN0, $b1, 512);
+      $n2 = read(IN1, $b2, 512);
+
+      if ($n1 != $n2) {last;}
+      if ($b1 != $b2) {last;}
+
+      if ($n1 == 0)
+      {
+         $ret = 0;
+         last;
+      }
+   }
+   close(IN0);
+   close(IN1);
+   return($ret);
+}
+
+############################################################################
+sub do_wait()
+{
+   my($key);
+
+   if ($pause)
+   {
+      print("Press ENTER to continue...");
+      $key = getc;
+      print("\n");
+   }
+}
+
+
+############################################################################
+sub make_tmp_cert_file()
+{
+   my @cert_files = <$cert_path/*.pem>;
+
+      # delete the file if it already exists
+   unlink($tmp_cert);
+
+   open( TMP_CERT, ">$tmp_cert") || die "\nunable to open $tmp_cert\n";
+
+   print("building temporary cert file\n");
+
+   # create a temporary cert file that contains all the certs
+   foreach $i (@cert_files)
+   {
+      open( IN_CERT, $i ) || die "\nunable to open $i\n";
+
+      for(;;)
+      {
+         $n = sysread(IN_CERT, $data, 1024);
+
+         if ($n == 0)
+         {
+            close(IN_CERT);
+            last;
+         };
+
+         syswrite(TMP_CERT, $data, $n);
+      }
+   }
+
+   close( TMP_CERT );
+}

Netware/globals.txt

@@ -0,0 +1,254 @@
+An initial review of the OpenSSL code was done to determine how many 
+global variables where present.  The idea was to determine the amount of 
+work required to pull the globals into an instance data structure in 
+order to build a Library NLM for NetWare.  This file contains the results 
+of the review.  Each file is listed along with the globals in the file.  
+The initial review was done very quickly so this list is probably
+not a comprehensive list.
+
+
+cryptlib.c
+===========================================
+
+static STACK *app_locks=NULL;
+
+static STACK_OF(CRYPTO_dynlock) *dyn_locks=NULL;
+
+static void (MS_FAR *locking_callback)(int mode,int type,
+   const char *file,int line)=NULL;
+static int (MS_FAR *add_lock_callback)(int *pointer,int amount,
+   int type,const char *file,int line)=NULL;
+static unsigned long (MS_FAR *id_callback)(void)=NULL;
+static struct CRYPTO_dynlock_value *(MS_FAR *dynlock_create_callback)
+   (const char *file,int line)=NULL;
+static void (MS_FAR *dynlock_lock_callback)(int mode,
+   struct CRYPTO_dynlock_value *l, const char *file,int line)=NULL;
+static void (MS_FAR *dynlock_destroy_callback)(struct CRYPTO_dynlock_value *l,
+   const char *file,int line)=NULL;
+
+
+mem.c
+===========================================
+static int allow_customize = 1;      /* we provide flexible functions for */
+static int allow_customize_debug = 1;/* exchanging memory-related functions at
+
+/* may be changed as long as `allow_customize' is set */
+static void *(*malloc_locked_func)(size_t)  = malloc;
+static void (*free_locked_func)(void *)     = free;
+static void *(*malloc_func)(size_t)         = malloc;
+static void *(*realloc_func)(void *, size_t)= realloc;
+static void (*free_func)(void *)            = free;
+
+/* use default functions from mem_dbg.c */
+static void (*malloc_debug_func)(void *,int,const char *,int,int)
+   = CRYPTO_dbg_malloc;
+static void (*realloc_debug_func)(void *,void *,int,const char *,int,int)
+   = CRYPTO_dbg_realloc;
+static void (*free_debug_func)(void *,int) = CRYPTO_dbg_free;
+static void (*set_debug_options_func)(long) = CRYPTO_dbg_set_options;
+static long (*get_debug_options_func)(void) = CRYPTO_dbg_get_options;
+
+
+mem_dbg.c
+===========================================
+static int mh_mode=CRYPTO_MEM_CHECK_OFF;
+static unsigned long order = 0; /* number of memory requests */
+static LHASH *mh=NULL; /* hash-table of memory requests (address as key) */
+
+static LHASH *amih=NULL; /* hash-table with those app_mem_info_st's */
+static long options =             /* extra information to be recorded */
+static unsigned long disabling_thread = 0;
+
+
+err.c
+===========================================
+static LHASH *error_hash=NULL;
+static LHASH *thread_hash=NULL;
+
+several files have routines with static "init" to track if error strings
+   have been loaded ( may not want seperate error strings for each process )
+   The "init" variable can't be left "global" because the error has is a ptr
+   that is malloc'ed.  The malloc'ed error has is dependant on the "init"
+   vars.
+
+   files:
+      pem_err.c
+      cpt_err.c
+      pk12err.c
+      asn1_err.c
+      bio_err.c
+      bn_err.c
+      buf_err.c
+      comp_err.c
+      conf_err.c
+      cpt_err.c
+      dh_err.c
+      dsa_err.c
+      dso_err.c
+      evp_err.c
+      obj_err.c
+      pkcs7err.c
+      rand_err.c
+      rsa_err.c
+      rsar_err.c
+      ssl_err.c
+      x509_err.c
+      v3err.c
+		err.c
+
+These file have similar "init" globals but they are for other stuff not
+error strings:
+
+		bn_lib.c
+		ecc_enc.c
+		s23_clnt.c
+		s23_meth.c
+		s23_srvr.c
+		s2_clnt.c
+		s2_lib.c
+		s2_meth.c
+		s2_srvr.c
+		s3_clnt.c
+		s3_lib.c
+		s3_srvr.c
+		t1_clnt.c
+		t1_meth.c
+		t1_srvr.c
+
+rand_lib.c
+===========================================
+static RAND_METHOD *rand_meth= &rand_ssleay_meth;
+
+md_rand.c
+===========================================
+static int state_num=0,state_index=0;
+static unsigned char state[STATE_SIZE+MD_DIGEST_LENGTH];
+static unsigned char md[MD_DIGEST_LENGTH];
+static long md_count[2]={0,0};
+static double entropy=0;
+static int initialized=0;
+
+/* This should be set to 1 only when ssleay_rand_add() is called inside
+   an already locked state, so it doesn't try to lock and thereby cause
+   a hang.  And it should always be reset back to 0 before unlocking. */
+static int add_do_not_lock=0;
+
+obj_dat.c
+============================================
+static int new_nid=NUM_NID;
+static LHASH *added=NULL;
+
+b_sock.c
+===========================================
+static unsigned long BIO_ghbn_hits=0L;
+static unsigned long BIO_ghbn_miss=0L;
+static struct ghbn_cache_st
+   {
+   char name[129];
+   struct hostent *ent;
+   unsigned long order;
+   } ghbn_cache[GHBN_NUM];
+
+static int wsa_init_done=0;
+
+
+bio_lib.c
+===========================================
+static STACK_OF(CRYPTO_EX_DATA_FUNCS) *bio_meth=NULL;
+static int bio_meth_num=0;
+
+
+bn_lib.c
+========================================
+static int bn_limit_bits=0;
+static int bn_limit_num=8;        /* (1<<bn_limit_bits) */
+static int bn_limit_bits_low=0;
+static int bn_limit_num_low=8;    /* (1<<bn_limit_bits_low) */
+static int bn_limit_bits_high=0;
+static int bn_limit_num_high=8;   /* (1<<bn_limit_bits_high) */
+static int bn_limit_bits_mont=0;
+static int bn_limit_num_mont=8;   /* (1<<bn_limit_bits_mont) */
+
+conf_lib.c
+========================================
+static CONF_METHOD *default_CONF_method=NULL;
+
+dh_lib.c
+========================================
+static DH_METHOD *default_DH_method;
+static int dh_meth_num = 0;
+static STACK_OF(CRYPTO_EX_DATA_FUNCS) *dh_meth = NULL;
+
+dsa_lib.c
+========================================
+static DSA_METHOD *default_DSA_method;
+static int dsa_meth_num = 0;
+static STACK_OF(CRYPTO_EX_DATA_FUNCS) *dsa_meth = NULL;
+
+dso_lib.c
+========================================
+static DSO_METHOD *default_DSO_meth = NULL;
+
+rsa_lib.c
+========================================
+static RSA_METHOD *default_RSA_meth=NULL;
+static int rsa_meth_num=0;
+static STACK_OF(CRYPTO_EX_DATA_FUNCS) *rsa_meth=NULL;
+
+x509_trs.c
+=======================================
+static int (*default_trust)(int id, X509 *x, int flags) = obj_trust;
+static STACK_OF(X509_TRUST) *trtable = NULL;
+
+x509_req.c
+=======================================
+static int *ext_nids = ext_nid_list;
+
+o_names.c
+======================================
+static LHASH *names_lh=NULL;
+static STACK_OF(NAME_FUNCS) *name_funcs_stack;
+static int free_type;
+static int names_type_num=OBJ_NAME_TYPE_NUM;
+
+
+th-lock.c - NEED to add support for locking for NetWare
+==============================================
+static long *lock_count;
+(other platform specific globals)
+
+x_x509.c
+==============================================
+static int x509_meth_num = 0;
+static STACK_OF(CRYPTO_EX_DATA_FUNCS) *x509_meth = NULL;
+
+
+evp_pbe.c
+============================================
+static STACK *pbe_algs;
+
+evp_key.c
+============================================
+static char prompt_string[80];
+
+ssl_ciph.c
+============================================
+static STACK_OF(SSL_COMP) *ssl_comp_methods=NULL;
+
+ssl_lib.c
+=============================================
+static STACK_OF(CRYPTO_EX_DATA_FUNCS) *ssl_meth=NULL;
+static STACK_OF(CRYPTO_EX_DATA_FUNCS) *ssl_ctx_meth=NULL;
+static int ssl_meth_num=0;
+static int ssl_ctx_meth_num=0;
+
+ssl_sess.c
+=============================================
+static int ssl_session_num=0;
+static STACK_OF(CRYPTO_EX_DATA_FUNCS) *ssl_session_meth=NULL;
+
+x509_vfy.c
+============================================
+static STACK_OF(CRYPTO_EX_DATA_FUNCS) *x509_store_ctx_method=NULL;
+static int x509_store_ctx_num=0;
+

Netware/readme.txt

@@ -0,0 +1,19 @@
+
+Contents of the openssl\netware directory
+==========================================
+
+Regular files:
+
+readme.txt     - this file
+do_tests.pl    - perl script used to run the OpenSSL tests on NetWare
+cpy_tests.bat  - batch to to copy test stuff to NetWare server
+build.bat      - batch file to help with builds
+set_env.bat    - batch file to help setup build environments
+globals.txt    - results of initial code review to identify OpenSSL global variables
+
+
+The following files are generated by the various scripts.  They are
+recreated each time and it is okay to delete them.
+
+*.def - command files used by Metrowerks linker
+*.mak - make files generated by mk1mf.pl

Netware/set_env.bat

@@ -0,0 +1,112 @@
+@echo off
+
+rem ========================================================================
+rem   Batch file to assist in setting up the necessary enviroment for
+rem   building OpenSSL for NetWare.
+rem
+rem   usage:
+rem      set_env [target]
+rem
+rem      target      - "netware-clib" - Clib build
+rem                  - "netware-libc" - LibC build
+rem
+rem
+
+if "a%1" == "a" goto usage
+               
+set LIBC_BUILD=
+set CLIB_BUILD=
+set GNUC=
+
+if "%1" == "netware-clib" set CLIB_BUILD=Y
+if "%1" == "netware-clib" set LIBC_BUILD=
+
+if "%1" == "netware-libc" set LIBC_BUILD=Y
+if "%1" == "netware-libc" set CLIB_BUILD=
+
+if "%2" == "gnuc" set GNUC=Y
+if "%2" == "codewarrior" set GNUC=
+
+rem   Location of tools (compiler, linker, etc)
+if "%NDKBASE%" == "" set NDKBASE=c:\Novell
+
+rem   If Perl for Win32 is not already in your path, add it here
+set PERL_PATH=
+
+rem   Define path to the Metrowerks command line tools
+rem   or GNU Crosscompiler gcc / nlmconv
+rem   ( compiler, assembler, linker)
+if "%GNUC%" == "Y" set COMPILER_PATH=c:\usr\i586-netware\bin;c:\usr\bin
+if "%GNUC%" == "" set COMPILER_PATH=c:\prg\cwcmdl40
+
+rem   If using gnu make define path to utility
+rem set GNU_MAKE_PATH=%NDKBASE%\gnu
+set GNU_MAKE_PATH=c:\prg\tools
+
+rem   If using ms nmake define path to nmake
+rem set MS_NMAKE_PATH=%NDKBASE%\msvc\600\bin
+
+rem   If using NASM assembler define path
+rem set NASM_PATH=%NDKBASE%\nasm
+set NASM_PATH=c:\prg\tools
+
+rem   Update path to include tool paths
+set path=%path%;%COMPILER_PATH%
+if not "%GNU_MAKE_PATH%" == "" set path=%path%;%GNU_MAKE_PATH%
+if not "%MS_NMAKE_PATH%" == "" set path=%path%;%MS_NMAKE_PATH%
+if not "%NASM_PATH%"     == "" set path=%path%;%NASM_PATH%
+if not "%PERL_PATH%"     == "" set path=%path%;%PERL_PATH%
+
+rem   Set INCLUDES to location of Novell NDK includes
+if "%LIBC_BUILD%" == "Y" set INCLUDE=%NDKBASE%\ndk\libc\include;%NDKBASE%\ndk\libc\include\winsock
+if "%CLIB_BUILD%" == "Y" set INCLUDE=%NDKBASE%\ndk\nwsdk\include\nlm;%NDKBASE%\ws295sdk\include
+
+rem   Set Imports to location of Novell NDK import files
+if "%LIBC_BUILD%" == "Y" set IMPORTS=%NDKBASE%\ndk\libc\imports
+if "%CLIB_BUILD%" == "Y" set IMPORTS=%NDKBASE%\ndk\nwsdk\imports
+
+rem   Set PRELUDE to the absolute path of the prelude object to link with in
+rem   the Metrowerks NetWare PDK - NOTE: for Clib builds "clibpre.o" is 
+rem   recommended, for LibC NKS builds libcpre.o must be used
+if "%GNUC%" == "Y" goto gnuc
+if "%LIBC_BUILD%" == "Y" set PRELUDE=%IMPORTS%\libcpre.o
+rem if "%CLIB_BUILD%" == "Y" set PRELUDE=%IMPORTS%\clibpre.o
+if "%CLIB_BUILD%" == "Y" set PRELUDE=%IMPORTS%\prelude.o
+echo using MetroWerks CodeWarrior 
+goto info
+
+:gnuc
+if "%LIBC_BUILD%" == "Y" set PRELUDE=%IMPORTS%\libcpre.gcc.o
+rem if "%CLIB_BUILD%" == "Y" set PRELUDE=%IMPORTS%\clibpre.gcc.o
+if "%CLIB_BUILD%" == "Y" set PRELUDE=%IMPORTS%\prelude.gcc.o
+echo using GNU GCC Compiler 
+
+:info
+echo.
+
+if "%LIBC_BUILD%" == "Y" echo Enviroment configured for LibC build
+if "%LIBC_BUILD%" == "Y" echo use "netware\build.bat netware-libc ..." 
+
+if "%CLIB_BUILD%" == "Y" echo Enviroment configured for CLib build
+if "%CLIB_BUILD%" == "Y" echo use "netware\build.bat netware-clib ..." 
+
+goto end
+
+:usage
+rem ===============================================================
+echo.
+echo No target build specified!
+echo.
+echo usage: set_env [target] [compiler]
+echo.
+echo target      - "netware-clib" - Clib build
+echo             - "netware-libc" - LibC build
+echo.
+echo compiler    - "gnuc"         - GNU GCC Compiler
+echo             - "codewarrior"  - MetroWerks CodeWarrior (default)
+echo.
+
+:end
+echo.
+
+

PROBLEMS

@@ -0,0 +1,199 @@
+* System libcrypto.dylib and libssl.dylib are used by system ld on MacOS X.
+
+
+    NOTE: The problem described here only applies when OpenSSL isn't built
+    with shared library support (i.e. without the "shared" configuration
+    option).  If you build with shared library support, you will have no
+    problems as long as you set up DYLD_LIBRARY_PATH properly at all times.
+
+
+This is really a misfeature in ld, which seems to look for .dylib libraries
+along the whole library path before it bothers looking for .a libraries.  This
+means that -L switches won't matter unless OpenSSL is built with shared
+library support.
+
+The workaround may be to change the following lines in apps/Makefile and
+test/Makefile:
+
+  LIBCRYPTO=-L.. -lcrypto
+  LIBSSL=-L.. -lssl
+
+to:
+
+  LIBCRYPTO=../libcrypto.a
+  LIBSSL=../libssl.a
+
+It's possible that something similar is needed for shared library support
+as well.  That hasn't been well tested yet.
+
+
+Another solution that many seem to recommend is to move the libraries
+/usr/lib/libcrypto.0.9.dylib, /usr/lib/libssl.0.9.dylib to a different
+directory, build and install OpenSSL and anything that depends on your
+build, then move libcrypto.0.9.dylib and libssl.0.9.dylib back to their
+original places.  Note that the version numbers on those two libraries
+may differ on your machine.
+
+
+As long as Apple doesn't fix the problem with ld, this problem building
+OpenSSL will remain as is. Well, the problem was addressed in 0.9.8f by
+passing -Wl,-search_paths_first, but it's unknown if the flag was
+supported from the initial MacOS X release.
+
+
+* Parallell make leads to errors
+
+While running tests, running a parallell make is a bad idea.  Many test
+scripts use the same name for output and input files, which means different
+will interfere with each other and lead to test failure.
+
+The solution is simple for now: don't run parallell make when testing.
+
+
+* Bugs in gcc triggered
+
+- According to a problem report, there are bugs in gcc 3.0 that are
+  triggered by some of the code in OpenSSL, more specifically in
+  PEM_get_EVP_CIPHER_INFO().  The triggering code is the following:
+
+	header+=11;
+	if (*header != '4') return(0); header++;
+	if (*header != ',') return(0); header++;
+
+  What happens is that gcc might optimize a little too agressively, and
+  you end up with an extra incrementation when *header != '4'.
+
+  We recommend that you upgrade gcc to as high a 3.x version as you can.
+
+- According to multiple problem reports, some of our message digest
+  implementations trigger bug[s] in code optimizer in gcc 3.3 for sparc64
+  and gcc 2.96 for ppc. Former fails to complete RIPEMD160 test, while
+  latter - SHA one.
+
+  The recomendation is to upgrade your compiler. This naturally applies to
+  other similar cases.
+
+- There is a subtle Solaris x86-specific gcc run-time environment bug, which
+  "falls between" OpenSSL [0.9.8 and later], Solaris ld and GCC. The bug
+  manifests itself as Segmentation Fault upon early application start-up.
+  The problem can be worked around by patching the environment according to
+  http://www.openssl.org/~appro/values.c.
+
+* solaris64-sparcv9-cc SHA-1 performance with WorkShop 6 compiler.
+
+As subject suggests SHA-1 might perform poorly (4 times slower)
+if compiled with WorkShop 6 compiler and -xarch=v9. The cause for
+this seems to be the fact that compiler emits multiplication to
+perform shift operations:-( To work the problem around configure
+with './Configure solaris64-sparcv9-cc -DMD32_REG_T=int'.
+
+* Problems with hp-parisc2-cc target when used with "no-asm" flag
+
+When using the hp-parisc2-cc target, wrong bignum code is generated.
+This is due to the SIXTY_FOUR_BIT build being compiled with the +O3
+aggressive optimization.
+The problem manifests itself by the BN_kronecker test hanging in an
+endless loop. Reason: the BN_kronecker test calls BN_generate_prime()
+which itself hangs. The reason could be tracked down to the bn_mul_comba8()
+function in bn_asm.c. At some occasions the higher 32bit value of r[7]
+is off by 1 (meaning: calculated=shouldbe+1). Further analysis failed,
+as no debugger support possible at +O3 and additional fprintf()'s
+introduced fixed the bug, therefore it is most likely a bug in the
+optimizer.
+The bug was found in the BN_kronecker test but may also lead to
+failures in other parts of the code.
+(See Ticket #426.)
+
+Workaround: modify the target to +O2 when building with no-asm.
+
+* Problems building shared libraries on SCO OpenServer Release 5.0.6
+  with gcc 2.95.3
+
+The symptoms appear when running the test suite, more specifically
+test/ectest, with the following result:
+
+OSSL_LIBPATH="`cd ..; pwd`"; LD_LIBRARY_PATH="$OSSL_LIBPATH:$LD_LIBRARY_PATH"; DYLD_LIBRARY_PATH="$OSSL_LIBPATH:$DYLD_LIBRARY_PATH"; SHLIB_PATH="$OSSL_LIBPATH:$SHLIB_PATH"; LIBPATH="$OSSL_LIBPATH:$LIBPATH"; if [ "debug-sco5-gcc" = "Cygwin" ]; then PATH="${LIBPATH}:$PATH"; fi; export LD_LIBRARY_PATH DYLD_LIBRARY_PATH SHLIB_PATH LIBPATH PATH; ./ectest
+ectest.c:186: ABORT
+
+The cause of the problem seems to be that isxdigit(), called from
+BN_hex2bn(), returns 0 on a perfectly legitimate hex digit.  Further
+investigation shows that any of the isxxx() macros return 0 on any
+input.  A direct look in the information array that the isxxx() use,
+called __ctype, shows that it contains all zeroes...
+
+Taking a look at the newly created libcrypto.so with nm, one can see
+that the variable __ctype is defined in libcrypto's .bss (which
+explains why it is filled with zeroes):
+
+$ nm -Pg libcrypto.so | grep __ctype
+__ctype B 0011659c
+__ctype2 U         
+
+Curiously, __ctype2 is undefined, in spite of being declared in
+/usr/include/ctype.h in exactly the same way as __ctype.
+
+Any information helping to solve this issue would be deeply
+appreciated.
+
+NOTE: building non-shared doesn't come with this problem.
+
+* ULTRIX build fails with shell errors, such as "bad substitution"
+  and "test: argument expected"
+
+The problem is caused by ULTRIX /bin/sh supporting only original
+Bourne shell syntax/semantics, and the trouble is that the vast
+majority is so accustomed to more modern syntax, that very few
+people [if any] would recognize the ancient syntax even as valid.
+This inevitably results in non-trivial scripts breaking on ULTRIX,
+and OpenSSL isn't an exclusion. Fortunately there is workaround,
+hire /bin/ksh to do the job /bin/sh fails to do.
+
+1. Trick make(1) to use /bin/ksh by setting up following environ-
+   ment variables *prior* you execute ./Configure and make:
+
+	PROG_ENV=POSIX
+	MAKESHELL=/bin/ksh
+	export PROG_ENV MAKESHELL
+
+   or if your shell is csh-compatible:
+
+	setenv PROG_ENV POSIX
+	setenv MAKESHELL /bin/ksh
+
+2. Trick /bin/sh to use alternative expression evaluator. Create
+   following 'test' script for example in /tmp:
+
+	#!/bin/ksh
+	${0##*/} "$@"
+
+   Then 'chmod a+x /tmp/test; ln /tmp/test /tmp/[' and *prepend*
+   your $PATH with chosen location, e.g. PATH=/tmp:$PATH. Alter-
+   natively just replace system /bin/test and /bin/[ with the
+   above script.
+
+* hpux64-ia64-cc fails blowfish test.
+
+Compiler bug, presumably at particular patch level. It should be noted
+that same compiler generates correct 32-bit code, a.k.a. hpux-ia64-cc
+target. Drop optimization level to +O2 when compiling 64-bit bf_skey.o.
+
+* no-engines generates errors.
+
+Unfortunately, the 'no-engines' configuration option currently doesn't
+work properly.  Use 'no-hw' and you'll will at least get no hardware
+support.  We'll see how we fix that on OpenSSL versions past 0.9.8.
+
+* 'make test' fails in BN_sqr [commonly with "error 139" denoting SIGSEGV]
+  if elder GNU binutils were deployed to link shared libcrypto.so.
+
+As subject suggests the failure is caused by a bug in elder binutils,
+either as or ld, and was observed on FreeBSD and Linux. There are two
+options. First is naturally to upgrade binutils, the second one - to
+reconfigure with additional no-sse2 [or 386] option passed to ./config.
+
+* If configured with ./config no-dso, toolkit still gets linked with -ldl,
+  which most notably poses a problem when linking with dietlibc.
+
+We don't have framework to associate -ldl with no-dso, therefore the only
+way is to edit Makefile right after ./config no-dso and remove -ldl from
+EX_LIBS line.

README

@@ -1,7 +1,7 @@
 
- OpenSSL 0.9.4  09 Aug 1999
+ OpenSSL 1.0.0g 18 Jan 2012
 
- Copyright (c) 1998-1999 The OpenSSL Project
+ Copyright (c) 1998-2011 The OpenSSL Project
  Copyright (c) 1995-1998 Eric A. Young, Tim J. Hudson
  All rights reserved.
 
@@ -11,15 +11,16 @@
  The OpenSSL Project is a collaborative effort to develop a robust,
  commercial-grade, fully featured, and Open Source toolkit implementing the
  Secure Sockets Layer (SSL v2/v3) and Transport Layer Security (TLS v1)
- protocols with full-strength cryptography world-wide. The project is managed
- by a worldwide community of volunteers that use the Internet to communicate,
- plan, and develop the OpenSSL toolkit and its related documentation. 
+ protocols as well as a full-strength general purpose cryptography library.
+ The project is managed by a worldwide community of volunteers that use the
+ Internet to communicate, plan, and develop the OpenSSL toolkit and its
+ related documentation.
 
  OpenSSL is based on the excellent SSLeay library developed from Eric A. Young
  and Tim J. Hudson.  The OpenSSL toolkit is licensed under a dual-license (the
  OpenSSL license plus the SSLeay license) situation, which basically means
  that you are free to get and use it for commercial and non-commercial
- purposes as long as you fulfill the conditions of both licenses. 
+ purposes as long as you fulfill the conditions of both licenses.
 
  OVERVIEW
  --------
@@ -35,12 +36,13 @@
      actually logically part of it. It includes routines for the following:
 
      Ciphers
-        libdes - EAY's libdes DES encryption package which has been floating
-                 around the net for a few years.  It includes 15
-                 'modes/variations' of DES (1, 2 and 3 key versions of ecb,
-                 cbc, cfb and ofb; pcbc and a more general form of cfb and
-                 ofb) including desx in cbc mode, a fast crypt(3), and
-                 routines to read passwords from the keyboard.
+        libdes - EAY's libdes DES encryption package which was floating
+                 around the net for a few years, and was then relicensed by
+                 him as part of SSLeay.  It includes 15 'modes/variations'
+                 of DES (1, 2 and 3 key versions of ecb, cbc, cfb and ofb;
+                 pcbc and a more general form of cfb and ofb) including desx
+                 in cbc mode, a fast crypt(3), and routines to read
+                 passwords from the keyboard.
         RC4 encryption,
         RC2 encryption      - 4 different modes, ecb, cbc, cfb and ofb.
         Blowfish encryption - 4 different modes, ecb, cbc, cfb and ofb.
@@ -52,16 +54,16 @@
         MDC2 message digest. A DES based hash that is popular on smart cards.
 
      Public Key
-        RSA encryption/decryption/generation.  
+        RSA encryption/decryption/generation.
             There is no limit on the number of bits.
-        DSA encryption/decryption/generation.   
+        DSA encryption/decryption/generation.
             There is no limit on the number of bits.
-        Diffie-Hellman key-exchange/key generation.  
+        Diffie-Hellman key-exchange/key generation.
             There is no limit on the number of bits.
 
      X.509v3 certificates
         X509 encoding/decoding into/from binary ASN1 and a PEM
-             based ascii-binary encoding which supports encryption with a
+             based ASCII-binary encoding which supports encryption with a
              private key.  Program to generate RSA and DSA certificate
              requests and to generate RSA and DSA certificates.
 
@@ -79,42 +81,16 @@
         A simple stack.
         A Configuration loader that uses a format similar to MS .ini files.
 
- openssl: 
-     A command line tool which provides the following functions:
+ openssl:
+     A command line tool that can be used for:
+        Creation of RSA, DH and DSA key parameters
+        Creation of X.509 certificates, CSRs and CRLs
+        Calculation of Message Digests
+        Encryption and Decryption with Ciphers
+        SSL/TLS Client and Server Tests
+        Handling of S/MIME signed or encrypted mail
+
 
-     enc     - a general encryption program that can encrypt/decrypt using
-               one of 17 different cipher/mode combinations.  The
-               input/output can also be converted to/from base64
-               ascii encoding.
-     dgst    - a generate message digesting program that will generate
-               message digests for any of md2, md5, sha (sha-0 or sha-1)
-               or mdc2.
-     asn1parse - parse and display the structure of an asn1 encoded
-               binary file.
-     rsa     - Manipulate RSA private keys.
-     dsa     - Manipulate DSA private keys.
-     dh      - Manipulate Diffie-Hellman parameter files.
-     dsaparam- Manipulate and generate DSA parameter files.
-     crl     - Manipulate certificate revocation lists.
-     crt2pkcs7- Generate a pkcs7 object containing a crl and a certificate.
-     x509    - Manipulate x509 certificates, self-sign certificates.
-     req     - Manipulate PKCS#10 certificate requests and also
-               generate certificate requests.
-     genrsa  - Generates an arbitrary sized RSA private key.
-     gendsa  - Generates DSA parameters.
-     gendh   - Generates a set of Diffie-Hellman parameters, the prime
-               will be a strong prime.
-     ca      - Create certificates from PKCS#10 certificate requests.
-               This program also maintains a database of certificates
-               issued.
-     verify  - Check x509 certificate signatures.
-     speed   - Benchmark OpenSSL's ciphers.
-     s_server- A test SSL server.
-     s_client- A test SSL client.
-     s_time  - Benchmark SSL performance of SSL server programs.
-     errstr  - Convert from OpenSSL hex error codes to a readable form.
-     nseq    - Netscape certificate sequence utility
-        
  PATENTS
  -------
 
@@ -122,21 +98,24 @@
  locations around the world. _YOU_ are responsible for ensuring that your use
  of any algorithms is legal by checking if there are any patents in your
  country.  The file contains some of the patents that we know about or are
- rumoured to exist. This is not a definitive list.
+ rumored to exist. This is not a definitive list.
 
- RSA Data Security holds software patents on the RSA and RC5 algorithms.  If
- their ciphers are used used inside the USA (and Japan?), you must contact RSA
- Data Security for licensing conditions. Their web page is
- http://www.rsa.com/.
+ RSA Security holds software patents on the RC5 algorithm.  If you
+ intend to use this cipher, you must contact RSA Security for
+ licensing conditions. Their web page is http://www.rsasecurity.com/.
 
- RC4 is a trademark of RSA Data Security, so use of this label should perhaps
- only be used with RSA Data Security's permission. 
+ RC4 is a trademark of RSA Security, so use of this label should perhaps
+ only be used with RSA Security's permission.
 
  The IDEA algorithm is patented by Ascom in Austria, France, Germany, Italy,
- Japan, Netherlands, Spain, Sweden, Switzerland, UK and the USA.  They should
- be contacted if that algorithm is to be used, their web page is
+ Japan, the Netherlands, Spain, Sweden, Switzerland, UK and the USA.  They
+ should be contacted if that algorithm is to be used; their web page is
  http://www.ascom.ch/.
 
+ NTT and Mitsubishi have patents and pending patents on the Camellia
+ algorithm, but allow use at no charge without requiring an explicit
+ licensing agreement: http://info.isl.ntt.co.jp/crypt/eng/info/chiteki.html
+
  INSTALLATION
  ------------
 
@@ -144,62 +123,96 @@
  a Win32 platform, read the INSTALL.W32 file.  For OpenVMS systems, read
  INSTALL.VMS.
 
- For people in the USA, it is possible to compile OpenSSL to use RSA Inc.'s
- public key library, RSAREF, by configuring OpenSSL with the option "rsaref".
-
  Read the documentation in the doc/ directory.  It is quite rough, but it
- lists the functions, you will probably have to look at the code to work out
- how to used them. Look at the example programs.
+ lists the functions; you will probably have to look at the code to work out
+ how to use them. Look at the example programs.
 
- SUPPORT 
+ PROBLEMS
+ --------
+
+ For some platforms, there are some known problems that may affect the user
+ or application author.  We try to collect those in doc/PROBLEMS, with current
+ thoughts on how they should be solved in a future of OpenSSL.
+
+ SUPPORT
  -------
 
+ See the OpenSSL website www.openssl.org for details of how to obtain
+ commercial technical support.
+
  If you have any problems with OpenSSL then please take the following steps
  first:
 
+    - Download the current snapshot from ftp://ftp.openssl.org/snapshot/
+      to see if the problem has already been addressed
     - Remove ASM versions of libraries
-    - Remove compiler optimisation flags 
-    - Add compiler debug flags (if using gcc then remove -fomit-frame-pointer
-      before you try to debug things)
+    - Remove compiler optimisation flags
 
  If you wish to report a bug then please include the following information in
  any bug report:
 
-    OpenSSL Details
-    - Version, most of these details can be got from the
-      'openssl version -a' command.
-    Operating System Details
-    - On Unix systems: Output of './config -t'
-    - OS Name, Version
-    - Hardware platform
-    Compiler Details
-    - Name
-    - Version
-    Application Details 
-    - Name 
-    - Version 
-    Problem Description
-    - include steps that will reproduce the problem (if known)
-    Stack Traceback (if the application dumps core)
+    - On Unix systems:
+        Self-test report generated by 'make report'
+    - On other systems:
+        OpenSSL version: output of 'openssl version -a'
+        OS Name, Version, Hardware platform
+        Compiler Details (name, version)
+    - Application Details (name, version)
+    - Problem Description (steps that will reproduce the problem, if known)
+    - Stack Traceback (if the application dumps core)
 
- Report the bug to the OpenSSL project at:
+ Report the bug to the OpenSSL project via the Request Tracker
+ (http://www.openssl.org/support/rt.html) by mail to:
 
     openssl-bugs@openssl.org
 
+ Note that the request tracker should NOT be used for general assistance
+ or support queries. Just because something doesn't work the way you expect
+ does not mean it is necessarily a bug in OpenSSL.
+
+ Note that mail to openssl-bugs@openssl.org is recorded in the publicly
+ readable request tracker database and is forwarded to a public
+ mailing list. Confidential mail may be sent to openssl-security@openssl.org
+ (PGP key available from the key servers).
+
  HOW TO CONTRIBUTE TO OpenSSL
  ----------------------------
 
  Development is coordinated on the openssl-dev mailing list (see
  http://www.openssl.org for information on subscribing). If you
- would like to submit a patch, send it to openssl-dev@openssl.org.
- Please be sure to include a textual explanation of what your patch
- does.
+ would like to submit a patch, send it to openssl-bugs@openssl.org with
+ the string "[PATCH]" in the subject. Please be sure to include a
+ textual explanation of what your patch does.
 
- The preferred format for changes is "diff -u" output. You might
+ If you are unsure as to whether a feature will be useful for the general
+ OpenSSL community please discuss it on the openssl-dev mailing list first.
+ Someone may be already working on the same thing or there may be a good
+ reason as to why that feature isn't implemented.
+
+ Patches should be as up to date as possible, preferably relative to the
+ current CVS or the last snapshot. They should follow the coding style of
+ OpenSSL and compile without warnings. Some of the core team developer targets
+ can be used for testing purposes, (debug-steve64, debug-geoff etc). OpenSSL
+ compiles on many varied platforms: try to ensure you only use portable
+ features.
+
+ Note: For legal reasons, contributions from the US can be accepted only
+ if a TSU notification and a copy of the patch are sent to crypt@bis.doc.gov
+ (formerly BXA) with a copy to the ENC Encryption Request Coordinator;
+ please take some time to look at
+    http://www.bis.doc.gov/Encryption/PubAvailEncSourceCodeNofify.html [sic]
+ and
+    http://w3.access.gpo.gov/bis/ear/pdf/740.pdf (EAR Section 740.13(e))
+ for the details. If "your encryption source code is too large to serve as
+ an email attachment", they are glad to receive it by fax instead; hope you
+ have a cheap long-distance plan.
+
+ Our preferred format for changes is "diff -u" output. You might
  generate it like this:
 
  # cd openssl-work
  # [your changes]
  # ./Configure dist; make clean
  # cd ..
- # diff -urN openssl-orig openssl-work > mydiffs.patch
+ # diff -ur openssl-orig openssl-work > mydiffs.patch
+

README.ASN1

@@ -0,0 +1,187 @@
+
+OpenSSL ASN1 Revision
+=====================
+
+This document describes some of the issues relating to the new ASN1 code.
+
+Previous OpenSSL ASN1 problems
+=============================
+
+OK why did the OpenSSL ASN1 code need revising in the first place? Well
+there are lots of reasons some of which are included below...
+
+1. The code is difficult to read and write. For every single ASN1 structure
+(e.g. SEQUENCE) four functions need to be written for new, free, encode and
+decode operations. This is a very painful and error prone operation. Very few
+people have ever written any OpenSSL ASN1 and those that have usually wish
+they hadn't.
+
+2. Partly because of 1. the code is bloated and takes up a disproportionate
+amount of space. The SEQUENCE encoder is particularly bad: it essentially
+contains two copies of the same operation, one to compute the SEQUENCE length
+and the other to encode it.
+
+3. The code is memory based: that is it expects to be able to read the whole
+structure from memory. This is fine for small structures but if you have a
+(say) 1Gb PKCS#7 signedData structure it isn't such a good idea...
+
+4. The code for the ASN1 IMPLICIT tag is evil. It is handled by temporarily
+changing the tag to the expected one, attempting to read it, then changing it
+back again. This means that decode buffers have to be writable even though they
+are ultimately unchanged. This gets in the way of constification.
+
+5. The handling of EXPLICIT isn't much better. It adds a chunk of code into 
+the decoder and encoder for every EXPLICIT tag.
+
+6. APPLICATION and PRIVATE tags aren't even supported at all.
+
+7. Even IMPLICIT isn't complete: there is no support for implicitly tagged
+types that are not OPTIONAL.
+
+8. Much of the code assumes that a tag will fit in a single octet. This is
+only true if the tag is 30 or less (mercifully tags over 30 are rare).
+
+9. The ASN1 CHOICE type has to be largely handled manually, there aren't any
+macros that properly support it.
+
+10. Encoders have no concept of OPTIONAL and have no error checking. If the
+passed structure contains a NULL in a mandatory field it will not be encoded,
+resulting in an invalid structure.
+
+11. It is tricky to add ASN1 encoders and decoders to external applications.
+
+Template model
+==============
+
+One of the major problems with revision is the sheer volume of the ASN1 code.
+Attempts to change (for example) the IMPLICIT behaviour would result in a
+modification of *every* single decode function. 
+
+I decided to adopt a template based approach. I'm using the term 'template'
+in a manner similar to SNACC templates: it has nothing to do with C++
+templates.
+
+A template is a description of an ASN1 module as several constant C structures.
+It describes in a machine readable way exactly how the ASN1 structure should
+behave. If this template contains enough detail then it is possible to write
+versions of new, free, encode, decode (and possibly others operations) that
+operate on templates.
+
+Instead of having to write code to handle each operation only a single
+template needs to be written. If new operations are needed (such as a 'print'
+operation) only a single new template based function needs to be written 
+which will then automatically handle all existing templates.
+
+Plans for revision
+==================
+
+The revision will consist of the following steps. Other than the first two
+these can be handled in any order.
+ 
+o Design and write template new, free, encode and decode operations, initially
+memory based. *DONE*
+
+o Convert existing ASN1 code to template form. *IN PROGRESS*
+
+o Convert an existing ASN1 compiler (probably SNACC) to output templates
+in OpenSSL form.
+
+o Add support for BIO based ASN1 encoders and decoders to handle large
+structures, initially blocking I/O.
+
+o Add support for non blocking I/O: this is quite a bit harder than blocking
+I/O.
+
+o Add new ASN1 structures, such as OCSP, CRMF, S/MIME v3 (CMS), attribute
+certificates etc etc.
+
+Description of major changes
+============================
+
+The BOOLEAN type now takes three values. 0xff is TRUE, 0 is FALSE and -1 is
+absent. The meaning of absent depends on the context. If for example the
+boolean type is DEFAULT FALSE (as in the case of the critical flag for
+certificate extensions) then -1 is FALSE, if DEFAULT TRUE then -1 is TRUE.
+Usually the value will only ever be read via an API which will hide this from
+an application.
+
+There is an evil bug in the old ASN1 code that mishandles OPTIONAL with
+SEQUENCE OF or SET OF. These are both implemented as a STACK structure. The
+old code would omit the structure if the STACK was NULL (which is fine) or if
+it had zero elements (which is NOT OK). This causes problems because an empty
+SEQUENCE OF or SET OF will result in an empty STACK when it is decoded but when
+it is encoded it will be omitted resulting in different encodings. The new code
+only omits the encoding if the STACK is NULL, if it contains zero elements it
+is encoded and empty. There is an additional problem though: because an empty
+STACK was omitted, sometimes the corresponding *_new() function would
+initialize the STACK to empty so an application could immediately use it, if
+this is done with the new code (i.e. a NULL) it wont work. Therefore a new
+STACK should be allocated first. One instance of this is the X509_CRL list of
+revoked certificates: a helper function X509_CRL_add0_revoked() has been added
+for this purpose.
+
+The X509_ATTRIBUTE structure used to have an element called 'set' which took
+the value 1 if the attribute value was a SET OF or 0 if it was a single. Due
+to the behaviour of CHOICE in the new code this has been changed to a field
+called 'single' which is 0 for a SET OF and 1 for single. The old field has
+been deleted to deliberately break source compatibility. Since this structure
+is normally accessed via higher level functions this shouldn't break too much.
+
+The X509_REQ_INFO certificate request info structure no longer has a field
+called 'req_kludge'. This used to be set to 1 if the attributes field was
+(incorrectly) omitted. You can check to see if the field is omitted now by
+checking if the attributes field is NULL. Similarly if you need to omit
+the field then free attributes and set it to NULL.
+
+The top level 'detached' field in the PKCS7 structure is no longer set when
+a PKCS#7 structure is read in. PKCS7_is_detached() should be called instead.
+The behaviour of PKCS7_get_detached() is unaffected.
+
+The values of 'type' in the GENERAL_NAME structure have changed. This is
+because the old code use the ASN1 initial octet as the selector. The new
+code uses the index in the ASN1_CHOICE template.
+
+The DIST_POINT_NAME structure has changed to be a true CHOICE type.
+
+typedef struct DIST_POINT_NAME_st {
+int type;
+union {
+	STACK_OF(GENERAL_NAME) *fullname;
+	STACK_OF(X509_NAME_ENTRY) *relativename;
+} name;
+} DIST_POINT_NAME;
+
+This means that name.fullname or name.relativename should be set
+and type reflects the option. That is if name.fullname is set then
+type is 0 and if name.relativename is set type is 1.
+
+With the old code using the i2d functions would typically involve:
+
+unsigned char *buf, *p;
+int len;
+/* Find length of encoding */
+len = i2d_SOMETHING(x, NULL);
+/* Allocate buffer */
+buf = OPENSSL_malloc(len);
+if(buf == NULL) {
+	/* Malloc error */
+}
+/* Use temp variable because &p gets updated to point to end of
+ * encoding.
+ */
+p = buf;
+i2d_SOMETHING(x, &p);
+
+
+Using the new i2d you can also do:
+
+unsigned char *buf = NULL;
+int len;
+len = i2d_SOMETHING(x, &buf);
+if(len < 0) {
+	/* Malloc error */
+}
+
+and it will automatically allocate and populate a buffer with the
+encoding. After this call 'buf' will point to the start of the
+encoding which is len bytes long.

README.ENGINE

@@ -0,0 +1,289 @@
+  ENGINE
+  ======
+
+  With OpenSSL 0.9.6, a new component was added to support alternative
+  cryptography implementations, most commonly for interfacing with external
+  crypto devices (eg. accelerator cards). This component is called ENGINE,
+  and its presence in OpenSSL 0.9.6 (and subsequent bug-fix releases)
+  caused a little confusion as 0.9.6** releases were rolled in two
+  versions, a "standard" and an "engine" version. In development for 0.9.7,
+  the ENGINE code has been merged into the main branch and will be present
+  in the standard releases from 0.9.7 forwards.
+
+  There are currently built-in ENGINE implementations for the following
+  crypto devices:
+
+      o CryptoSwift
+      o Compaq Atalla
+      o nCipher CHIL
+      o Nuron
+      o Broadcom uBSec
+
+  In addition, dynamic binding to external ENGINE implementations is now
+  provided by a special ENGINE called "dynamic". See the "DYNAMIC ENGINE"
+  section below for details.
+
+  At this stage, a number of things are still needed and are being worked on:
+
+      1 Integration of EVP support.
+      2 Configuration support.
+      3 Documentation!
+
+1 With respect to EVP, this relates to support for ciphers and digests in
+  the ENGINE model so that alternative implementations of existing
+  algorithms/modes (or previously unimplemented ones) can be provided by
+  ENGINE implementations.
+
+2 Configuration support currently exists in the ENGINE API itself, in the
+  form of "control commands". These allow an application to expose to the
+  user/admin the set of commands and parameter types a given ENGINE
+  implementation supports, and for an application to directly feed string
+  based input to those ENGINEs, in the form of name-value pairs. This is an
+  extensible way for ENGINEs to define their own "configuration" mechanisms
+  that are specific to a given ENGINE (eg. for a particular hardware
+  device) but that should be consistent across *all* OpenSSL-based
+  applications when they use that ENGINE. Work is in progress (or at least
+  in planning) for supporting these control commands from the CONF (or
+  NCONF) code so that applications using OpenSSL's existing configuration
+  file format can have ENGINE settings specified in much the same way.
+  Presently however, applications must use the ENGINE API itself to provide
+  such functionality. To see first hand the types of commands available
+  with the various compiled-in ENGINEs (see further down for dynamic
+  ENGINEs), use the "engine" openssl utility with full verbosity, ie;
+       openssl engine -vvvv
+
+3 Documentation? Volunteers welcome! The source code is reasonably well
+  self-documenting, but some summaries and usage instructions are needed -
+  moreover, they are needed in the same POD format the existing OpenSSL
+  documentation is provided in. Any complete or incomplete contributions
+  would help make this happen.
+
+  STABILITY & BUG-REPORTS
+  =======================
+
+  What already exists is fairly stable as far as it has been tested, but
+  the test base has been a bit small most of the time. For the most part,
+  the vendors of the devices these ENGINEs support have contributed to the
+  development and/or testing of the implementations, and *usually* (with no
+  guarantees) have experience in using the ENGINE support to drive their
+  devices from common OpenSSL-based applications. Bugs and/or inexplicable
+  behaviour in using a specific ENGINE implementation should be sent to the
+  author of that implementation (if it is mentioned in the corresponding C
+  file), and in the case of implementations for commercial hardware
+  devices, also through whatever vendor support channels are available.  If
+  none of this is possible, or the problem seems to be something about the
+  ENGINE API itself (ie. not necessarily specific to a particular ENGINE
+  implementation) then you should mail complete details to the relevant
+  OpenSSL mailing list. For a definition of "complete details", refer to
+  the OpenSSL "README" file. As for which list to send it to;
+
+     openssl-users: if you are *using* the ENGINE abstraction, either in an
+          pre-compiled application or in your own application code.
+
+     openssl-dev: if you are discussing problems with OpenSSL source code.
+
+  USAGE
+  =====
+
+  The default "openssl" ENGINE is always chosen when performing crypto
+  operations unless you specify otherwise. You must actively tell the
+  openssl utility commands to use anything else through a new command line
+  switch called "-engine". Also, if you want to use the ENGINE support in
+  your own code to do something similar, you must likewise explicitly
+  select the ENGINE implementation you want.
+
+  Depending on the type of hardware, system, and configuration, "settings"
+  may need to be applied to an ENGINE for it to function as expected/hoped.
+  The recommended way of doing this is for the application to support
+  ENGINE "control commands" so that each ENGINE implementation can provide
+  whatever configuration primitives it might require and the application
+  can allow the user/admin (and thus the hardware vendor's support desk
+  also) to provide any such input directly to the ENGINE implementation.
+  This way, applications do not need to know anything specific to any
+  device, they only need to provide the means to carry such user/admin
+  input through to the ENGINE in question. Ie. this connects *you* (and
+  your helpdesk) to the specific ENGINE implementation (and device), and
+  allows application authors to not get buried in hassle supporting
+  arbitrary devices they know (and care) nothing about.
+
+  A new "openssl" utility, "openssl engine", has been added in that allows
+  for testing and examination of ENGINE implementations. Basic usage
+  instructions are available by specifying the "-?" command line switch.
+
+  DYNAMIC ENGINES
+  ===============
+
+  The new "dynamic" ENGINE provides a low-overhead way to support ENGINE
+  implementations that aren't pre-compiled and linked into OpenSSL-based
+  applications. This could be because existing compiled-in implementations
+  have known problems and you wish to use a newer version with an existing
+  application. It could equally be because the application (or OpenSSL
+  library) you are using simply doesn't have support for the ENGINE you
+  wish to use, and the ENGINE provider (eg. hardware vendor) is providing
+  you with a self-contained implementation in the form of a shared-library.
+  The other use-case for "dynamic" is with applications that wish to
+  maintain the smallest foot-print possible and so do not link in various
+  ENGINE implementations from OpenSSL, but instead leaves you to provide
+  them, if you want them, in the form of "dynamic"-loadable
+  shared-libraries. It should be possible for hardware vendors to provide
+  their own shared-libraries to support arbitrary hardware to work with
+  applications based on OpenSSL 0.9.7 or later. If you're using an
+  application based on 0.9.7 (or later) and the support you desire is only
+  announced for versions later than the one you need, ask the vendor to
+  backport their ENGINE to the version you need.
+
+  How does "dynamic" work?
+  ------------------------
+    The dynamic ENGINE has a special flag in its implementation such that
+    every time application code asks for the 'dynamic' ENGINE, it in fact
+    gets its own copy of it. As such, multi-threaded code (or code that
+    multiplexes multiple uses of 'dynamic' in a single application in any
+    way at all) does not get confused by 'dynamic' being used to do many
+    independent things. Other ENGINEs typically don't do this so there is
+    only ever 1 ENGINE structure of its type (and reference counts are used
+    to keep order). The dynamic ENGINE itself provides absolutely no
+    cryptographic functionality, and any attempt to "initialise" the ENGINE
+    automatically fails. All it does provide are a few "control commands"
+    that can be used to control how it will load an external ENGINE
+    implementation from a shared-library. To see these control commands,
+    use the command-line;
+
+       openssl engine -vvvv dynamic
+
+    The "SO_PATH" control command should be used to identify the
+    shared-library that contains the ENGINE implementation, and "NO_VCHECK"
+    might possibly be useful if there is a minor version conflict and you
+    (or a vendor helpdesk) is convinced you can safely ignore it.
+    "ID" is probably only needed if a shared-library implements
+    multiple ENGINEs, but if you know the engine id you expect to be using,
+    it doesn't hurt to specify it (and this provides a sanity check if
+    nothing else). "LIST_ADD" is only required if you actually wish the
+    loaded ENGINE to be discoverable by application code later on using the
+    ENGINE's "id". For most applications, this isn't necessary - but some
+    application authors may have nifty reasons for using it. The "LOAD"
+    command is the only one that takes no parameters and is the command
+    that uses the settings from any previous commands to actually *load*
+    the shared-library ENGINE implementation. If this command succeeds, the
+    (copy of the) 'dynamic' ENGINE will magically morph into the ENGINE
+    that has been loaded from the shared-library. As such, any control
+    commands supported by the loaded ENGINE could then be executed as per
+    normal. Eg. if ENGINE "foo" is implemented in the shared-library
+    "libfoo.so" and it supports some special control command "CMD_FOO", the
+    following code would load and use it (NB: obviously this code has no
+    error checking);
+
+       ENGINE *e = ENGINE_by_id("dynamic");
+       ENGINE_ctrl_cmd_string(e, "SO_PATH", "/lib/libfoo.so", 0);
+       ENGINE_ctrl_cmd_string(e, "ID", "foo", 0);
+       ENGINE_ctrl_cmd_string(e, "LOAD", NULL, 0);
+       ENGINE_ctrl_cmd_string(e, "CMD_FOO", "some input data", 0);
+
+    For testing, the "openssl engine" utility can be useful for this sort
+    of thing. For example the above code excerpt would achieve much the
+    same result as;
+
+       openssl engine dynamic \
+                 -pre SO_PATH:/lib/libfoo.so \
+                 -pre ID:foo \
+                 -pre LOAD \
+                 -pre "CMD_FOO:some input data"
+
+    Or to simply see the list of commands supported by the "foo" ENGINE;
+
+       openssl engine -vvvv dynamic \
+                 -pre SO_PATH:/lib/libfoo.so \
+                 -pre ID:foo \
+                 -pre LOAD
+
+    Applications that support the ENGINE API and more specifically, the
+    "control commands" mechanism, will provide some way for you to pass
+    such commands through to ENGINEs. As such, you would select "dynamic"
+    as the ENGINE to use, and the parameters/commands you pass would
+    control the *actual* ENGINE used. Each command is actually a name-value
+    pair and the value can sometimes be omitted (eg. the "LOAD" command).
+    Whilst the syntax demonstrated in "openssl engine" uses a colon to
+    separate the command name from the value, applications may provide
+    their own syntax for making that separation (eg. a win32 registry
+    key-value pair may be used by some applications). The reason for the
+    "-pre" syntax in the "openssl engine" utility is that some commands
+    might be issued to an ENGINE *after* it has been initialised for use.
+    Eg. if an ENGINE implementation requires a smart-card to be inserted
+    during initialisation (or a PIN to be typed, or whatever), there may be
+    a control command you can issue afterwards to "forget" the smart-card
+    so that additional initialisation is no longer possible. In
+    applications such as web-servers, where potentially volatile code may
+    run on the same host system, this may provide some arguable security
+    value. In such a case, the command would be passed to the ENGINE after
+    it has been initialised for use, and so the "-post" switch would be
+    used instead. Applications may provide a different syntax for
+    supporting this distinction, and some may simply not provide it at all
+    ("-pre" is almost always what you're after, in reality).
+
+  How do I build a "dynamic" ENGINE?
+  ----------------------------------
+    This question is trickier - currently OpenSSL bundles various ENGINE
+    implementations that are statically built in, and any application that
+    calls the "ENGINE_load_builtin_engines()" function will automatically
+    have all such ENGINEs available (and occupying memory). Applications
+    that don't call that function have no ENGINEs available like that and
+    would have to use "dynamic" to load any such ENGINE - but on the other
+    hand such applications would only have the memory footprint of any
+    ENGINEs explicitly loaded using user/admin provided control commands.
+    The main advantage of not statically linking ENGINEs and only using
+    "dynamic" for hardware support is that any installation using no
+    "external" ENGINE suffers no unnecessary memory footprint from unused
+    ENGINEs. Likewise, installations that do require an ENGINE incur the
+    overheads from only *that* ENGINE once it has been loaded.
+
+    Sounds good? Maybe, but currently building an ENGINE implementation as
+    a shared-library that can be loaded by "dynamic" isn't automated in
+    OpenSSL's build process. It can be done manually quite easily however.
+    Such a shared-library can either be built with any OpenSSL code it
+    needs statically linked in, or it can link dynamically against OpenSSL
+    if OpenSSL itself is built as a shared library. The instructions are
+    the same in each case, but in the former (statically linked any
+    dependencies on OpenSSL) you must ensure OpenSSL is built with
+    position-independent code ("PIC"). The default OpenSSL compilation may
+    already specify the relevant flags to do this, but you should consult
+    with your compiler documentation if you are in any doubt.
+
+    This example will show building the "atalla" ENGINE in the
+    crypto/engine/ directory as a shared-library for use via the "dynamic"
+    ENGINE.
+    1) "cd" to the crypto/engine/ directory of a pre-compiled OpenSSL
+       source tree.
+    2) Recompile at least one source file so you can see all the compiler
+       flags (and syntax) being used to build normally. Eg;
+           touch hw_atalla.c ; make
+       will rebuild "hw_atalla.o" using all such flags.
+    3) Manually enter the same compilation line to compile the
+       "hw_atalla.c" file but with the following two changes;
+         (a) add "-DENGINE_DYNAMIC_SUPPORT" to the command line switches,
+	 (b) change the output file from "hw_atalla.o" to something new,
+             eg. "tmp_atalla.o"
+    4) Link "tmp_atalla.o" into a shared-library using the top-level
+       OpenSSL libraries to resolve any dependencies. The syntax for doing
+       this depends heavily on your system/compiler and is a nightmare
+       known well to anyone who has worked with shared-library portability
+       before. 'gcc' on Linux, for example, would use the following syntax;
+          gcc -shared -o dyn_atalla.so tmp_atalla.o -L../.. -lcrypto
+    5) Test your shared library using "openssl engine" as explained in the
+       previous section. Eg. from the top-level directory, you might try;
+          apps/openssl engine -vvvv dynamic \
+              -pre SO_PATH:./crypto/engine/dyn_atalla.so -pre LOAD
+       If the shared-library loads successfully, you will see both "-pre"
+       commands marked as "SUCCESS" and the list of control commands
+       displayed (because of "-vvvv") will be the control commands for the
+       *atalla* ENGINE (ie. *not* the 'dynamic' ENGINE). You can also add
+       the "-t" switch to the utility if you want it to try and initialise
+       the atalla ENGINE for use to test any possible hardware/driver
+       issues.
+
+  PROBLEMS
+  ========
+
+  It seems like the ENGINE part doesn't work too well with CryptoSwift on Win32.
+  A quick test done right before the release showed that trying "openssl speed
+  -engine cswift" generated errors. If the DSO gets enabled, an attempt is made
+  to write at memory address 0x00000002.
+

STATUS

@@ -1,69 +1,113 @@
 
   OpenSSL STATUS                           Last modified at
-  ______________                           $Date: 1999/08/09 10:25:36 $
+  ______________                           $Date: 2012/01/18 13:38:33 $
 
   DEVELOPMENT STATE
 
-    o  OpenSSL 0.9.4:  Is rolled the next hour...
-    o  OpenSSL 0.9.3a: Released on May      29th, 1999
-    o  OpenSSL 0.9.3:  Released on May      25th, 1999
-    o  OpenSSL 0.9.2b: Released on March    22th, 1999
-    o  OpenSSL 0.9.1c: Released on December 23th, 1998
+    o  OpenSSL 1.1.0:  Under development...
+    o  OpenSSL 1.0.1:  Under development...
+    o  OpenSSL 1.0.0g: Released on January   18th, 2012
+    o  OpenSSL 1.0.0f: Released on January    4th, 2012
+    o  OpenSSL 1.0.0e: Released on September  6th, 2011
+    o  OpenSSL 1.0.0d: Released on February   8nd, 2011
+    o  OpenSSL 1.0.0c: Released on December   2nd, 2010
+    o  OpenSSL 1.0.0b: Released on November  16th, 2010
+    o  OpenSSL 1.0.0a: Released on June      1st,  2010
+    o  OpenSSL 1.0.0:  Released on March     29th, 2010
+    o  OpenSSL 0.9.8r: Released on February   8nd, 2011
+    o  OpenSSL 0.9.8q: Released on December   2nd, 2010
+    o  OpenSSL 0.9.8p: Released on November  16th, 2010
+    o  OpenSSL 0.9.8o: Released on June       1st, 2010
+    o  OpenSSL 0.9.8n: Released on March     24th, 2010
+    o  OpenSSL 0.9.8m: Released on February  25th, 2010
+    o  OpenSSL 0.9.8l: Released on November   5th, 2009
+    o  OpenSSL 0.9.8k: Released on March     25th, 2009
+    o  OpenSSL 0.9.8j: Released on January    7th, 2009
+    o  OpenSSL 0.9.8i: Released on September 15th, 2008
+    o  OpenSSL 0.9.8h: Released on May       28th, 2008
+    o  OpenSSL 0.9.8g: Released on October   19th, 2007
+    o  OpenSSL 0.9.8f: Released on October   11th, 2007
+    o  OpenSSL 0.9.8e: Released on February  23rd, 2007
+    o  OpenSSL 0.9.8d: Released on September 28th, 2006
+    o  OpenSSL 0.9.8c: Released on September  5th, 2006
+    o  OpenSSL 0.9.8b: Released on May        4th, 2006
+    o  OpenSSL 0.9.8a: Released on October   11th, 2005
+    o  OpenSSL 0.9.8:  Released on July       5th, 2005
+    o  OpenSSL 0.9.7m: Released on February  23rd, 2007
+    o  OpenSSL 0.9.7l: Released on September 28th, 2006
+    o  OpenSSL 0.9.7k: Released on September  5th, 2006
+    o  OpenSSL 0.9.7j: Released on May        4th, 2006
+    o  OpenSSL 0.9.7i: Released on October   14th, 2005
+    o  OpenSSL 0.9.7h: Released on October   11th, 2005
+    o  OpenSSL 0.9.7g: Released on April     11th, 2005
+    o  OpenSSL 0.9.7f: Released on March     22nd, 2005
+    o  OpenSSL 0.9.7e: Released on October   25th, 2004
+    o  OpenSSL 0.9.7d: Released on March     17th, 2004
+    o  OpenSSL 0.9.7c: Released on September 30th, 2003
+    o  OpenSSL 0.9.7b: Released on April     10th, 2003
+    o  OpenSSL 0.9.7a: Released on February  19th, 2003
+    o  OpenSSL 0.9.7:  Released on December  31st, 2002
+    o  OpenSSL 0.9.6m: Released on March     17th, 2004
+    o  OpenSSL 0.9.6l: Released on November   4th, 2003
+    o  OpenSSL 0.9.6k: Released on September 30th, 2003
+    o  OpenSSL 0.9.6j: Released on April     10th, 2003
+    o  OpenSSL 0.9.6i: Released on February  19th, 2003
+    o  OpenSSL 0.9.6h: Released on December   5th, 2002
+    o  OpenSSL 0.9.6g: Released on August     9th, 2002
+    o  OpenSSL 0.9.6f: Released on August     8th, 2002
+    o  OpenSSL 0.9.6e: Released on July      30th, 2002
+    o  OpenSSL 0.9.6d: Released on May        9th, 2002
+    o  OpenSSL 0.9.6c: Released on December  21st, 2001
+    o  OpenSSL 0.9.6b: Released on July       9th, 2001
+    o  OpenSSL 0.9.6a: Released on April      5th, 2001
+    o  OpenSSL 0.9.6:  Released on September 24th, 2000
+    o  OpenSSL 0.9.5a: Released on April      1st, 2000
+    o  OpenSSL 0.9.5:  Released on February  28th, 2000
+    o  OpenSSL 0.9.4:  Released on August    09th, 1999
+    o  OpenSSL 0.9.3a: Released on May       29th, 1999
+    o  OpenSSL 0.9.3:  Released on May       25th, 1999
+    o  OpenSSL 0.9.2b: Released on March     22th, 1999
+    o  OpenSSL 0.9.1c: Released on December  23th, 1998
+
+  [See also http://www.openssl.org/support/rt.html]
 
   RELEASE SHOWSTOPPERS
 
+    o The Makefiles fail with some SysV makes.
+    o 
+
   AVAILABLE PATCHES
 
-    o OCSP (titchenert@certco.com) 
-    o getenv in ca.c and x509_def.c (jaltman@watsun.cc.columbia.edu)
+    o 
 
   IN PROGRESS
 
     o Steve is currently working on (in no particular order):
-        Proper (or at least usable) certificate chain verification.
+        ASN1 code redesign, butchery, replacement.
+        OCSP
+        EVP cipher enhancement.
+        Enhanced certificate chain verification.
 	Private key, certificate and CRL API and implementation.
-	Checking and bugfixing PKCS#7 (S/MIME code).
-
-    o Mark is currently working on:
-        Folding in any changes that are in the C2Net code base that were
-        not in the original SSLeay-0.9.1.b release.  Plus other minor
-        tidying.
-
-    o Ralf is currently working on:
-        1. Support for SSL_set_default_verify_paths(),
-           SSL_load_verify_locations(), SSL_get_cert_store() and
-           SSL_set_cert_store() functions which work like their existing
-           SSL_CTX_xxx() variants but on a per connection basis. That's needed
-           to let us provide full-featured per-URL client verification in
-           mod_ssl or Apache-SSL.
-           => It still dumps core, so I suspend this and investigate
-              again for OpenSSL 0.9.3.
-        2. The perl/ stuff to make it really work the first time ;-)
-           => I'll investigate a few more hours for OpenSSL 0.9.2
-        3. The new documentation set in POD format under doc/
-           => I'll investigate a few more hours for OpenSSL 0.9.2
-        4. More cleanups to get rid of obsolete/old/ugly files in the
-           source tree which are not really needed.
-           => Done all which were possible with my personal knowledge
-
-    o Ben is currently working on:
-	1. Function Prototype Thought Police issues.
-	2. Integrated documentation.
-	3. New TLS Ciphersuites.
-	4. Anything else that takes his fancy.
+	Developing and bugfixing PKCS#7 (S/MIME code).
+        Various X509 issues: character sets, certificate request extensions.
+    o Richard is currently working on:
+	Constification
+	Attribute Certificate support
+	Certificate Pair support
+	Storage Engines (primarly an LDAP storage engine)
+	Certificate chain validation with full RFC 3280 compatibility
 
   NEEDS PATCH
 
-    o  salzr@certco.com (Rich Salz): Bug in X509_name_print
-       <29E0A6D39ABED111A36000A0C99609CA2C2BA4@macertco-srv1.ma.certco.com>
-    o  $(PERL) in */Makefile.ssl
-    o  "Sign the certificate?" - "n" creates empty certificate file
+    o  0.9.8-dev: COMPLEMENTOFALL and COMPLEMENTOFDEFAULT do not
+       handle ECCdraft cipher suites correctly.
+
+    o  apps/ca.c: "Sign the certificate?" - "n" creates empty certificate file
+
+    o  "OpenSSL STATUS" is never up-to-date.
 
   OPEN ISSUES
 
-    o internal_verify doesn't know about X509.v3 (basicConstraints
-      CA flag ...)
-
     o  The Makefile hierarchy and build mechanism is still not a round thing:
 
        1. The config vs. Configure scripts
@@ -84,37 +128,24 @@
                compiler PIC and linker DSO flags from Apache
                into the OpenSSL Configure script.
 
-    o  The perl/ stuff needs a major overhaul. Currently it's
-       totally obsolete. Either we clean it up and enhance it to be up-to-date
-       with the C code or we also could replace it with the really nice
-       Net::SSLeay package we can find under
-       http://www.neuronio.pt/SSLeay.pm.html.  Ralf uses this package for a
-       longer time and it works fine and is a nice Perl module. Best would be
-       to convince the author to work for the OpenSSL project and create a
-       Net::OpenSSL or Crypt::OpenSSL package out of it and maintains it for
-       us.
-
-       Status: Ralf thinks we should both contact the author of Net::SSLeay
-               and look how much effort it is to bring Eric's perl/ stuff up
-               to date.
-               Paul +1
-
-    o The EVP and ASN1 stuff is a mess. Currently you have one EVP_CIPHER
-      structure for each cipher. This may make sense for things like DES but
-      for variable length ciphers like RC2 and RC4 it is NBG. Need a way to
-      use the EVP interface and set up the cipher parameters. The ASN1 stuff
-      is also foo wrt ciphers whose AlgorithmIdentifier has more than just
-      an IV in it (e.g. RC2, RC5). This also means that EVP_Seal and EVP_Open
-      don't work unless the key length matches the fixed value (some vendors
-      use a key length decided by the size of the RSA encrypted key and expect
-      RC2 to adapt).
-
-    o Properly initialize the PRNG in the absence of /dev/random.
-
-    o ERR_error_string(..., buf) does not know how large buf is,
-      there should be ERR_error_string_n(..., buf, bufsize)
-      or similar.
+               Ulf: +1 for using GNU autoconf and libtool (but not automake,
+                    which apparently is not flexible enough to generate
+                    libcrypto)
 
   WISHES
 
-    o 
+    o  Add variants of DH_generate_parameters() and BN_generate_prime() [etc?]
+       where the callback function can request that the function be aborted.
+       [Gregory Stark <ghstark@pobox.com>, <rayyang2000@yahoo.com>]
+
+    o  SRP in TLS.
+       [wished by:
+        Dj <derek@yo.net>, Tom Wu <tom@arcot.com>,
+        Tom Holroyd <tomh@po.crl.go.jp>]
+
+       See http://search.ietf.org/internet-drafts/draft-ietf-tls-srp-00.txt
+       as well as http://www-cs-students.stanford.edu/~tjw/srp/.
+
+       Tom Holroyd tells us there is a SRP patch for OpenSSH at
+       http://members.tripod.com/professor_tom/archives/, that could
+       be useful.

VMS/VMSify-conf.pl

@@ -0,0 +1,34 @@
+#! /usr/bin/perl
+
+use strict;
+use warnings;
+
+my @directory_vars = ( "dir", "certs", "crl_dir", "new_certs_dir" );
+my @file_vars = ( "database", "certificate", "serial", "crlnumber",
+		  "crl", "private_key", "RANDFILE" );
+while(<STDIN>) {
+    chomp;
+    foreach my $d (@directory_vars) {
+	if (/^(\s*\#?\s*${d}\s*=\s*)\.\/([^\s\#]*)([\s\#].*)$/) {
+	    $_ = "$1sys\\\$disk:\[.$2$3";
+	} elsif (/^(\s*\#?\s*${d}\s*=\s*)(\w[^\s\#]*)([\s\#].*)$/) {
+	    $_ = "$1sys\\\$disk:\[.$2$3";
+	}
+	s/^(\s*\#?\s*${d}\s*=\s*\$\w+)\/([^\s\#]*)([\s\#].*)$/$1.$2\]$3/;
+	while(/^(\s*\#?\s*${d}\s*=\s*(\$\w+\.|sys\\\$disk:\[\.)[\w\.]+)\/([^\]]*)\](.*)$/) {
+	    $_ = "$1.$3]$4";
+	}
+    }
+    foreach my $f (@file_vars) {
+	s/^(\s*\#?\s*${f}\s*=\s*)\.\/(.*)$/$1sys\\\$disk:\[\/$2/;
+	while(/^(\s*\#?\s*${f}\s*=\s*(\$\w+|sys\\\$disk:\[)[^\/]*)\/(\w+\/[^\s\#]*)([\s\#].*)$/) {
+	    $_ = "$1.$3$4";
+	}
+	if (/^(\s*\#?\s*${f}\s*=\s*(\$\w+|sys\\\$disk:\[)[^\/]*)\/(\w+)([\s\#].*)$/) {
+	    $_ = "$1]$3.$4";
+	} elsif  (/^(\s*\#?\s*${f}\s*=\s*(\$\w+|sys\\\$disk:\[)[^\/]*)\/([^\s\#]*)([\s\#].*)$/) {
+	    $_ = "$1]$3$4";
+	}
+   }
+    print $_,"\n";
+}

VMS/install-vms.com

@@ -0,0 +1,67 @@
+$! install-vms.com -- Installs the files in a given directory tree
+$!
+$! Author: Richard Levitte <richard@levitte.org>
+$! Time of creation: 23-MAY-1998 19:22
+$!
+$! P1	root of the directory tree
+$!
+$!
+$! Announce/identify.
+$!
+$ proc = f$environment( "procedure")
+$ write sys$output "@@@ "+ -
+   f$parse( proc, , , "name")+ f$parse( proc, , , "type")
+$!
+$ on error then goto tidy
+$ on control_c then goto tidy
+$!
+$ if p1 .eqs. ""
+$ then
+$   write sys$output "First argument missing."
+$   write sys$output -
+     "Should be the directory where you want things installed."
+$   exit
+$ endif
+$
+$ if (f$getsyi( "cpu") .lt. 128)
+$ then
+$   arch = "VAX"
+$ else
+$   arch = f$edit( f$getsyi( "arch_name"), "upcase")
+$   if (arch .eqs. "") then arch = "UNK"
+$ endif
+$
+$ root = f$parse( P1, "[]A.;0", , , "SYNTAX_ONLY, NO_CONCEAL")- "A.;0"
+$ root_dev = f$parse( root, , , "device", "syntax_only")
+$ root_dir = f$parse( root, , , "directory", "syntax_only") - -
+   "[000000." - "][" - "[" - "]"
+$ root = root_dev + "[" + root_dir
+$
+$ define /nolog wrk_sslroot 'root'.] /translation_attributes = concealed
+$ define /nolog wrk_sslinclude wrk_sslroot:[include]
+$
+$ if f$parse( "wrk_sslroot:[000000]") .eqs. "" then -
+   create /directory /log wrk_sslroot:[000000]
+$ if f$parse( "wrk_sslinclude:") .eqs. "" then -
+   create /directory /log wrk_sslinclude:
+$ if f$parse( "wrk_sslroot:[vms]") .eqs. "" then -
+   create /directory /log wrk_sslroot:[vms]
+$!
+$ copy /log /protection = world:re openssl_startup.com wrk_sslroot:[vms]
+$ copy /log /protection = world:re openssl_undo.com wrk_sslroot:[vms]
+$ copy /log /protection = world:re openssl_utils.com wrk_sslroot:[vms]
+$!
+$ tidy:
+$!
+$ call deass wrk_sslroot
+$ call deass wrk_sslinclude
+$!
+$ exit
+$!
+$ deass: subroutine
+$ if (f$trnlnm( p1, "LNM$PROCESS") .nes. "")
+$ then
+$   deassign /process 'p1'
+$ endif
+$ endsubroutine
+$!

VMS/install.com

@@ -1,71 +0,0 @@
-$! INSTALL.COM -- Installs the files in a given directory tree
-$!
-$! Author: Richard Levitte <richard@levitte.org>
-$! Time of creation: 23-MAY-1998 19:22
-$!
-$! P1	root of the directory tree
-$!
-$	IF P1 .EQS. ""
-$	THEN
-$	    WRITE SYS$OUTPUT "First argument missing."
-$	    WRITE SYS$OUTPUT "Should be the directory where you want things installed."
-$	    EXIT
-$	ENDIF
-$
-$	ROOT = F$PARSE(P1,"[]A.;0",,,"SYNTAX_ONLY,NO_CONCEAL") - "A.;0"
-$	ROOT_DEV = F$PARSE(ROOT,,,"DEVICE","SYNTAX_ONLY")
-$	ROOT_DIR = F$PARSE(ROOT,,,"DIRECTORY","SYNTAX_ONLY") -
-		   - "[000000." - "][" - "[" - "]"
-$	ROOT = ROOT_DEV + "[" + ROOT_DIR
-$
-$	DEFINE/NOLOG WRK_SSLROOT 'ROOT'.] /TRANS=CONC
-$	DEFINE/NOLOG WRK_SSLVLIB WRK_SSLROOT:[VAX_LIB]
-$	DEFINE/NOLOG WRK_SSLALIB WRK_SSLROOT:[ALPHA_LIB]
-$	DEFINE/NOLOG WRK_SSLINCLUDE WRK_SSLROOT:[INCLUDE]
-$	DEFINE/NOLOG WRK_SSLVEXE WRK_SSLROOT:[VAX_EXE]
-$	DEFINE/NOLOG WRK_SSLAEXE WRK_SSLROOT:[ALPHA_EXE]
-$	DEFINE/NOLOG WRK_SSLCERTS WRK_SSLROOT:[CERTS]
-$	DEFINE/NOLOG WRK_SSLPRIVATE WRK_SSLROOT:[PRIVATE]
-$
-$	IF F$PARSE("WRK_SSLROOT:[000000]") .EQS. "" THEN -
-	   CREATE/DIR/LOG WRK_SSLROOT:[000000]
-$	IF F$PARSE("WRK_SSLINCLUDE:") .EQS. "" THEN -
-	   CREATE/DIR/LOG WRK_SSLINCLUDE:
-$	IF F$PARSE("WRK_SSLROOT:[VMS]") .EQS. "" THEN -
-	   CREATE/DIR/LOG WRK_SSLROOT:[VMS]
-$
-$	EXHEADER := vms_idhacks.h
-$
-$	COPY 'EXHEADER' WRK_SSLINCLUDE: /LOG
-$
-$	OPEN/WRITE SF WRK_SSLROOT:[VMS]OPENSSL_STARTUP.COM
-$	WRITE SYS$OUTPUT "%OPEN-I-CREATED,  ",F$SEARCH("WRK_SSLROOT:[VMS]OPENSSL_STARTUP.COM")," created."
-$	WRITE SF "$! Startup file for Openssl 0.9.2-RL 15-Mar-1999"
-$	WRITE SF "$!"
-$	WRITE SF "$! Do not edit this file, as it will be regenerated during next installation."
-$	WRITE SF "$! Instead, add or change SSLROOT:[VMS]OPENSSL_SYSTARTUP.COM"
-$	WRITE SF "$!"
-$	WRITE SF "$! P1	a qualifier to DEFINE.  For example ""/SYSTEM"" to get the logical names"
-$	WRITE SF "$!	defined in the system logical name table."
-$	WRITE SF "$!"
-$	WRITE SF "$	ARCH = ""VAX"""
-$	WRITE SF "$	IF F$GETSYI(""CPU"") .GE. 128 THEN ARCH = ""ALPHA"""
-$	WRITE SF "$	DEFINE/NOLOG'P1	SSLROOT		",ROOT,".] /TRANS=CONC"
-$	WRITE SF "$	DEFINE/NOLOG'P1	SSLLIB		SSLROOT:['ARCH'_LIB]"
-$	WRITE SF "$	DEFINE/NOLOG'P1	SSLINCLUDE	SSLROOT:[INCLUDE]"
-$	WRITE SF "$	DEFINE/NOLOG'P1	SSLEXE		SSLROOT:['ARCH'_EXE]"
-$	WRITE SF "$	DEFINE/NOLOG'P1	SSLCERTS	SSLROOT:[CERTS]"
-$	WRITE SF "$	DEFINE/NOLOG'P1	SSLPRIVATE	SSLROOT:[PRIVATE]"
-$	WRITE SF "$"
-$	WRITE SF "$!	This is program can include <openssl/{foo}.h>"
-$	WRITE SF "$	DEFINE/NOLOG'P1	OPENSSL		SSLINCLUDE:"
-$	WRITE SF "$"
-$	WRITE SF "$	IF F$SEARCH(""SSLROOT:[VMS]OPENSSL_SYSTARTUP.COM"") .NES."""" THEN -"
-$	WRITE SF "	   @SSLROOT:[VMS]OPENSSL_SYSTARTUP.COM"
-$	WRITE SF "$"
-$	WRITE SF "$	EXIT"
-$	CLOSE SF
-$
-$	COPY OPENSSL_UTILS.COM WRK_SSLROOT:[VMS]/LOG
-$
-$	EXIT

VMS/mkshared.com

@@ -0,0 +1,476 @@
+$! MKSHARED.COM -- Create shareable images.
+$!
+$! P1: "64" for 64-bit pointers.
+$!
+$! P2: Zlib object library path (optional).
+$!
+$! Input:	[.UTIL]LIBEAY.NUM,[.xxx.EXE.CRYPTO]SSL_LIBCRYPTO[32].OLB
+$!		[.UTIL]SSLEAY.NUM,[.xxx.EXE.SSL]SSL_LIBSSL[32].OLB
+$!		[.CRYPTO.xxx]OPENSSLCONF.H
+$! Output:	[.xxx.EXE.CRYPTO]SSL_LIBCRYPTO_SHR[32].OPT,.MAP,.EXE
+$!		[.xxx.EXE.SSL]SSL_LIBSSL_SRH[32].OPT,.MAP,.EXE
+$!
+$! So far, tests have only been made on VMS for Alpha.  VAX will come in time.
+$! ===========================================================================
+$!
+$! Announce/identify.
+$!
+$ proc = f$environment( "procedure")
+$ write sys$output "@@@ "+ -
+   f$parse( proc, , , "name")+ f$parse( proc, , , "type")
+$!
+$! Save the original default device:[directory].
+$!
+$ def_orig = f$environment( "default")
+$ on error then goto tidy
+$ on control_c then goto tidy
+$!
+$! SET DEFAULT to the main kit directory.
+$!
+$ proc = f$environment("procedure")
+$ proc = f$parse( "A.;", proc)- "A.;"
+$ set default 'proc'
+$ set default [-]
+$!
+$! ----- Prepare info for processing: version number and file info
+$ gosub read_version_info
+$ if libver .eqs. ""
+$ then
+$   write sys$error "ERROR: Couldn't find any library version info..."
+$   go to tidy:
+$ endif
+$
+$ if (f$getsyi("cpu") .lt. 128)
+$ then
+$   arch_vax = 1
+$   arch = "VAX"
+$ else
+$   arch_vax = 0
+$   arch = f$edit( f$getsyi( "ARCH_NAME"), "UPCASE")
+$   if (arch .eqs. "") then arch = "UNK"
+$ endif
+$!
+$ archd = arch
+$ lib32 = "32"
+$ shr = "SHR32"
+$!
+$ if (p1 .nes. "")
+$ then
+$   if (p1 .eqs. "64")
+$   then
+$     archd = arch+ "_64"
+$     lib32 = ""
+$     shr = "SHR"
+$   else
+$     if (p1 .nes. "32")
+$     then
+$       write sys$output "Second argument invalid."
+$       write sys$output "It should be "32", "64", or nothing."
+$       exit
+$     endif
+$   endif
+$ endif
+$!
+$! ----- Prepare info for processing: disabled algorithms info
+$ gosub read_disabled_algorithms_info
+$!
+$ ZLIB = p2
+$ zlib_lib = ""
+$ if (ZLIB .nes. "")
+$ then
+$   file2 = f$parse( ZLIB, "libz.olb", , , "syntax_only")
+$   if (f$search( file2) .eqs. "")
+$   then
+$     write sys$output ""
+$     write sys$output "The Option ", ZLIB, " Is Invalid."
+$     write sys$output "    Can't find library: ''file2'"
+$     write sys$output ""
+$     goto tidy
+$   endif
+$   zlib_lib = ", ''file2' /library"
+$ endif
+$!
+$ if (arch_vax)
+$ then
+$   libtit = "CRYPTO_TRANSFER_VECTOR"
+$   libid  = "Crypto"
+$   libnum = "[.UTIL]LIBEAY.NUM"
+$   libdir = "[.''ARCHD'.EXE.CRYPTO]"
+$   libmar = "''libdir'SSL_LIBCRYPTO_''shr'.MAR"
+$   libolb = "''libdir'SSL_LIBCRYPTO''lib32'.OLB"
+$   libopt = "''libdir'SSL_LIBCRYPTO_''shr'.OPT"
+$   libobj = "''libdir'SSL_LIBCRYPTO_''shr'.OBJ"
+$   libmap = "''libdir'SSL_LIBCRYPTO_''shr'.MAP"
+$   libgoal= "''libdir'SSL_LIBCRYPTO_''shr'.EXE"
+$   libref = ""
+$   libvec = "LIBCRYPTO"
+$   if f$search( libolb) .nes. "" then gosub create_vax_shr
+$   libtit = "SSL_TRANSFER_VECTOR"
+$   libid  = "SSL"
+$   libnum = "[.UTIL]SSLEAY.NUM"
+$   libdir = "[.''ARCHD'.EXE.SSL]"
+$   libmar = "''libdir'SSL_LIBSSL_''shr'.MAR"
+$   libolb = "''libdir'SSL_LIBSSL''lib32'.OLB"
+$   libopt = "''libdir'SSL_LIBSSL_''shr'.OPT"
+$   libobj = "''libdir'SSL_LIBSSL_''shr'.OBJ"
+$   libmap = "''libdir'SSL_LIBSSL_''shr'.MAP"
+$   libgoal= "''libdir'SSL_LIBSSL_''shr'.EXE"
+$   libref = "[.''ARCHD'.EXE.CRYPTO]SSL_LIBCRYPTO_''shr'.EXE"
+$   libvec = "LIBSSL"
+$   if f$search( libolb) .nes. "" then gosub create_vax_shr
+$ else
+$   libid  = "Crypto"
+$   libnum = "[.UTIL]LIBEAY.NUM"
+$   libdir = "[.''ARCHD'.EXE.CRYPTO]"
+$   libolb = "''libdir'SSL_LIBCRYPTO''lib32'.OLB"
+$   libopt = "''libdir'SSL_LIBCRYPTO_''shr'.OPT"
+$   libmap = "''libdir'SSL_LIBCRYPTO_''shr'.MAP"
+$   libgoal= "''libdir'SSL_LIBCRYPTO_''shr'.EXE"
+$   libref = ""
+$   if f$search( libolb) .nes. "" then gosub create_nonvax_shr
+$   libid  = "SSL"
+$   libnum = "[.UTIL]SSLEAY.NUM"
+$   libdir = "[.''ARCHD'.EXE.SSL]"
+$   libolb = "''libdir'SSL_LIBSSL''lib32'.OLB"
+$   libopt = "''libdir'SSL_LIBSSL_''shr'.OPT"
+$   libmap = "''libdir'SSL_LIBSSL_''shr'.MAP"
+$   libgoal= "''libdir'SSL_LIBSSL_''shr'.EXE"
+$   libref = "[.''ARCHD'.EXE.CRYPTO]SSL_LIBCRYPTO_''shr'.EXE"
+$   if f$search( libolb) .nes. "" then gosub create_nonvax_shr
+$ endif
+$!
+$ tidy:
+$!
+$! Close any open files.
+$!
+$ if (f$trnlnm( "libnum", "LNM$PROCESS", 0, "SUPERVISOR") .nes. "") then -
+   close libnum
+$!
+$ if (f$trnlnm( "mar", "LNM$PROCESS", 0, "SUPERVISOR") .nes. "") then -
+   close mar
+$!
+$ if (f$trnlnm( "opt", "LNM$PROCESS", 0, "SUPERVISOR") .nes. "") then -
+   close opt
+$!
+$ if (f$trnlnm( "vf", "LNM$PROCESS", 0, "SUPERVISOR") .nes. "") then -
+   close vf
+$!
+$! Restore the original default device:[directory].
+$!
+$ set default 'def_orig'
+$ exit
+$
+$! ----- Subroutines to build the shareable libraries
+$! For each supported architecture, there's a main shareable library
+$! creator, which is called from the main code above.
+$! The creator will define a number of variables to tell the next levels of
+$! subroutines what routines to use to write to the option files, call the
+$! main processor, read_func_num, and when that is done, it will write version
+$! data at the end of the .opt file, close it, and link the library.
+$!
+$! read_func_num reads through a .num file and calls the writer routine for
+$! each line.  It's also responsible for checking that order is properly kept
+$! in the .num file, check that each line applies to VMS and the architecture,
+$! and to fill in "holes" with dummy entries.
+$!
+$! The creator routines depend on the following variables:
+$! libnum	The name of the .num file to use as input
+$! libolb	The name of the object library to build from
+$! libid	The identification string of the shareable library
+$! libopt	The name of the .opt file to write
+$! libtit	The title of the assembler transfer vector file (VAX only)
+$! libmar	The name of the assembler transfer vector file (VAX only)
+$! libmap	The name of the map file to write
+$! libgoal	The name of the shareable library to write
+$! libref	The name of a shareable library to link in
+$!
+$! read_func_num depends on the following variables from the creator:
+$! libwriter	The name of the writer routine to call for each .num file line
+$! -----
+$
+$! ----- Subroutines for non-VAX
+$! -----
+$! The creator routine
+$ create_nonvax_shr:
+$   open /write opt 'libopt'
+$   write opt "identification=""",libid," ",libverstr,""""
+$   write opt libolb, " /library"
+$   if libref .nes. "" then write opt libref,"/SHARE"
+$   write opt "SYMBOL_VECTOR=(-"
+$   libfirstentry := true
+$   libwrch   := opt
+$   libwriter := write_nonvax_transfer_entry
+$   textcount = 0
+$   gosub read_func_num
+$   write opt ")"
+$   write opt "GSMATCH=",libvmatch,",",libver
+$   close opt
+$   link /map = 'libmap' /full /share = 'libgoal' 'libopt' /options -
+     'zlib_lib'
+$   return
+$
+$! The record writer routine
+$ write_nonvax_transfer_entry:
+$   if libentry .eqs. ".dummy" then return
+$   if info_kind .eqs. "VARIABLE"
+$   then
+$     pr:=DATA
+$   else
+$     pr:=PROCEDURE
+$   endif
+$   textcount_this = f$length(pr) + f$length(libentry) + 5
+$   if textcount + textcount_this .gt. 1024
+$   then
+$     write opt ")"
+$     write opt "SYMBOL_VECTOR=(-"
+$     textcount = 16
+$     libfirstentry := true
+$   endif
+$   if libfirstentry
+$   then
+$     write 'libwrch' "    ",libentry,"=",pr," -"
+$   else
+$     write 'libwrch' "    ,",libentry,"=",pr," -"
+$   endif
+$   libfirstentry := false
+$   textcount = textcount + textcount_this
+$   return
+$
+$! ----- Subroutines for VAX
+$! -----
+$! The creator routine
+$ create_vax_shr:
+$   open /write mar 'libmar'
+$   type sys$input:/out=mar:
+;
+; Transfer vector for VAX shareable image
+;
+$   write mar "	.TITLE ",libtit
+$   write mar "	.IDENT /",libid,"/"
+$   type sys$input:/out=mar:
+;
+; Define macro to assist in building transfer vector entries.  Each entry
+; should take no more than 8 bytes.
+;
+	.MACRO FTRANSFER_ENTRY routine
+	.ALIGN QUAD
+	.TRANSFER routine
+	.MASK	routine
+	JMP	routine+2
+	.ENDM FTRANSFER_ENTRY
+;
+; Place entries in own program section.
+;
+$   write mar "	.PSECT $$",libvec,",QUAD,PIC,USR,CON,REL,LCL,SHR,EXE,RD,NOWRT"
+$   write mar libvec,"_xfer:"
+$   libwrch   := mar
+$   libwriter := write_vax_ftransfer_entry
+$   gosub read_func_num
+$   type sys$input:/out=mar:
+;
+; Allocate extra storage at end of vector to allow for expansion.
+;
+$   write mar "	.BLKB 32768-<.-",libvec,"_xfer>	; 64 pages total."
+$!   libwriter := write_vax_vtransfer_entry
+$!   gosub read_func_num
+$   write mar "	.END"
+$   close mar
+$   open /write opt 'libopt'
+$   write opt "identification=""",libid," ",libverstr,""""
+$   write opt libobj
+$   write opt libolb, " /library"
+$   if libref .nes. "" then write opt libref,"/SHARE"
+$   type sys$input:/out=opt:
+!
+! Ensure transfer vector is at beginning of image
+!
+CLUSTER=FIRST
+$   write opt "COLLECT=FIRST,$$",libvec
+$   write opt "GSMATCH=",libvmatch,",",libver
+$   type sys$input:/out=opt:
+!
+! make psects nonshareable so image can be installed.
+!
+PSECT_ATTR=$CHAR_STRING_CONSTANTS,NOWRT
+$   libwrch   := opt
+$   libwriter := write_vax_psect_attr
+$   gosub read_func_num
+$   close opt
+$   macro/obj='libobj' 'libmar'
+$   link /map = 'libmap' /full /share = 'libgoal' 'libopt' /options -
+     'zlib_lib'
+$   return
+$
+$! The record writer routine for VAX functions
+$ write_vax_ftransfer_entry:
+$   if info_kind .nes. "FUNCTION" then return
+$   if libentry .eqs ".dummy"
+$   then
+$     write 'libwrch' "	.BLKB 8" ! Dummy is zeroes...
+$   else
+$     write 'libwrch' "	FTRANSFER_ENTRY ",libentry
+$   endif
+$   return
+$! The record writer routine for VAX variables (should never happen!)
+$ write_vax_psect_attr:
+$   if info_kind .nes. "VARIABLE" then return
+$   if libentry .eqs ".dummy" then return
+$   write 'libwrch' "PSECT_ATTR=",libentry,",NOSHR"
+$   return
+$
+$! ----- Common subroutines
+$! -----
+$! The .num file reader.  This one has great responsibility.
+$ read_func_num:
+$   open /read libnum 'libnum'
+$   goto read_nums
+$
+$ read_nums:
+$   libentrynum=0
+$   liblastentry:=false
+$   entrycount=0
+$   loop:
+$     read /end=loop_end /err=loop_end libnum line
+$     lin = f$edit( line, "COMPRESS,TRIM")
+$!    Skip a "#" comment line.
+$     if (f$extract( 0, 1, lin) .eqs. "#") then goto loop
+$     entrynum = f$int(f$element( 1, " ", lin))
+$     entryinfo = f$element( 2, " ", lin)
+$     curentry = f$element( 0, " ", lin)
+$     info_exist = f$element( 0, ":", entryinfo)
+$     info_platforms = ","+ f$element(1, ":", entryinfo)+ ","
+$     info_kind = f$element( 2, ":", entryinfo)
+$     info_algorithms = ","+ f$element( 3, ":", entryinfo)+ ","
+$     if info_exist .eqs. "NOEXIST" then goto loop
+$     truesum = 0
+$     falsesum = 0
+$     negatives = 1
+$     plat_i = 0
+$     loop1:
+$       plat_entry = f$element( plat_i, ",", info_platforms)
+$       plat_i = plat_i + 1
+$       if plat_entry .eqs. "" then goto loop1
+$       if plat_entry .nes. ","
+$       then
+$         if f$extract(0,1,plat_entry) .nes. "!" then negatives = 0
+$         if (arch_vax)
+$         then
+$           if plat_entry .eqs. "EXPORT_VAR_AS_FUNCTION" then -
+$             truesum = truesum + 1
+$           if plat_entry .eqs. "!EXPORT_VAR_AS_FUNCTION" then -
+$             falsesum = falsesum + 1
+$         endif
+$!
+$         if ((plat_entry .eqs. "VMS") .or. -
+            ((plat_entry .eqs. "ZLIB") .and. (ZLIB .nes. "")) .or. -
+            (arch_vax .and. (plat_entry .eqs. "VMSVAX"))) then -
+            truesum = truesum + 1
+$!
+$         if ((plat_entry .eqs. "!VMS") .or. -
+            (arch_vax .and. (plat_entry .eqs. "!VMSVAX"))) then -
+            falsesum = falsesum + 1
+$!
+$	  goto loop1
+$       endif
+$     endloop1:
+$!DEBUG!$     if info_platforms - "EXPORT_VAR_AS_FUNCTION" .nes. info_platforms
+$!DEBUG!$     then
+$!DEBUG!$       write sys$output line
+$!DEBUG!$       write sys$output "        truesum = ",truesum,-
+$!DEBUG!		", negatives = ",negatives,", falsesum = ",falsesum
+$!DEBUG!$     endif
+$     if falsesum .ne. 0 then goto loop
+$     if truesum+negatives .eq. 0 then goto loop
+$     alg_i = 0
+$     loop2:
+$       alg_entry = f$element(alg_i,",",info_algorithms)
+$	alg_i = alg_i + 1
+$       if alg_entry .eqs. "" then goto loop2
+$       if alg_entry .nes. ","
+$       then
+$	  if disabled_algorithms - ("," + alg_entry + ",") .nes disabled_algorithms then goto loop
+$         if f$trnlnm("OPENSSL_NO_"+alg_entry) .nes. "" then goto loop
+$	  goto loop2
+$       endif
+$     endloop2:
+$     if info_platforms - "EXPORT_VAR_AS_FUNCTION" .nes. info_platforms
+$     then
+$!DEBUG!$     write sys$output curentry," ; ",entrynum," ; ",entryinfo
+$     endif
+$   redo:
+$     next:=loop
+$     tolibentry=curentry
+$     if libentrynum .ne. entrynum
+$     then
+$       entrycount=entrycount+1
+$       if entrycount .lt. entrynum
+$       then
+$!DEBUG!$         write sys$output "Info: entrycount: ''entrycount', entrynum: ''entrynum' => 0"
+$         tolibentry=".dummy"
+$         next:=redo
+$       endif
+$       if entrycount .gt. entrynum
+$       then
+$         write sys$error "Decreasing library entry numbers!  Can't continue"
+$         write sys$error """",line,""""
+$         close libnum
+$         return
+$       endif
+$       libentry=tolibentry
+$!DEBUG!$       write sys$output entrycount," ",libentry," ",entryinfo
+$       if libentry .nes. "" .and. libwriter .nes. "" then gosub 'libwriter'
+$     else
+$       write sys$error "Info: ""''curentry'"" is an alias for ""''libentry'"".  Overriding..."
+$     endif
+$     libentrynum=entrycount
+$     goto 'next'
+$   loop_end:
+$   close libnum
+$   return
+$
+$! The version number reader
+$ read_version_info:
+$   libver = ""
+$   open /read vf [.CRYPTO]OPENSSLV.H
+$   loop_rvi:
+$     read/err=endloop_rvi/end=endloop_rvi vf rvi_line
+$     if rvi_line - "SHLIB_VERSION_NUMBER """ .eqs. rvi_line then -
+	goto loop_rvi
+$     libverstr = f$element(1,"""",rvi_line)
+$     libvmajor = f$element(0,".",libverstr)
+$     libvminor = f$element(1,".",libverstr)
+$     libvedit = f$element(2,".",libverstr)
+$     libvpatch = f$cvui(0,8,f$extract(1,1,libvedit)+"@")-f$cvui(0,8,"@")
+$     libvedit = f$extract(0,1,libvedit)
+$     libver = f$string(f$int(libvmajor)*100)+","+-
+	f$string(f$int(libvminor)*100+f$int(libvedit)*10+f$int(libvpatch))
+$     if libvmajor .eqs. "0"
+$     then
+$       libvmatch = "EQUAL"
+$     else
+$       ! Starting with the 1.0 release, backward compatibility should be
+$       ! kept, so switch over to the following
+$       libvmatch = "LEQUAL"
+$     endif
+$   endloop_rvi:
+$   close vf
+$   return
+$
+$! The disabled algorithms reader
+$ read_disabled_algorithms_info:
+$   disabled_algorithms = ","
+$   open /read cf [.CRYPTO.'ARCH']OPENSSLCONF.H
+$   loop_rci:
+$     read/err=endloop_rci/end=endloop_rci cf rci_line
+$     rci_line = f$edit(rci_line,"TRIM,COMPRESS")
+$     rci_ei = 0
+$     if f$extract(0,9,rci_line) .eqs. "# define " then rci_ei = 2
+$     if f$extract(0,8,rci_line) .eqs. "#define " then rci_ei = 1
+$     if rci_ei .eq. 0 then goto loop_rci
+$     rci_e = f$element(rci_ei," ",rci_line)
+$     if f$extract(0,11,rci_e) .nes. "OPENSSL_NO_" then goto loop_rci
+$     disabled_algorithms = disabled_algorithms + f$extract(11,999,rci_e) + ","
+$     goto loop_rci
+$   endloop_rci:
+$   close cf
+$   return

VMS/openssl_startup.com

@@ -0,0 +1,108 @@
+$!
+$! Startup file for OpenSSL 1.x.
+$!
+$! 2011-03-05 SMS.
+$!
+$! This procedure must reside in the OpenSSL installation directory.
+$! It will fail if it is copied to a different location.
+$!
+$! P1  qualifier(s) for DEFINE.  For example, "/SYSTEM" to get the
+$!     logical names defined in the system logical name table.
+$!
+$! P2  "64", to use executables which were built with 64-bit pointers.
+$!
+$! Good (default) and bad status values.
+$!
+$ status =    %x00010001 ! RMS$_NORMAL, normal successful completion.
+$ rms_e_fnf = %x00018292 ! RMS$_FNF, file not found.
+$!
+$! Prepare for problems.
+$!
+$ orig_dev_dir = f$environment( "DEFAULT")
+$ on control_y then goto clean_up
+$ on error then goto clean_up
+$!
+$! Determine hardware architecture.
+$!
+$ if (f$getsyi( "cpu") .lt. 128)
+$ then
+$   arch_name = "VAX"
+$ else
+$   arch_name = f$edit( f$getsyi( "arch_name"), "upcase")
+$   if (arch_name .eqs. "") then arch_name = "UNK"
+$ endif
+$!
+$ if (p2 .eqs. "64")
+$ then
+$   arch_name_exe = arch_name+ "_64"
+$ else
+$   arch_name_exe = arch_name
+$ endif
+$!
+$! Derive the OpenSSL installation device:[directory] from the location
+$! of this command procedure.
+$!
+$ proc = f$environment( "procedure")
+$ proc_dev_dir = f$parse( "A.;", proc, , , "no_conceal") - "A.;"
+$ proc_dev = f$parse( proc_dev_dir, , , "device", "syntax_only")
+$ proc_dir = f$parse( proc_dev_dir, , , "directory", "syntax_only") - -
+   ".][000000"- "[000000."- "]["- "["- "]"
+$ proc_dev_dir = proc_dev+ "["+ proc_dir+ "]"
+$ set default 'proc_dev_dir'
+$ set default [-]
+$ ossl_dev_dir = f$environment( "default")
+$!
+$! Check existence of expected directories (to see if this procedure has
+$! been moved away from its proper place).
+$!
+$ if ((f$search( "certs.dir;1") .eqs. "") .or. -
+   (f$search( "include.dir;1") .eqs. "") .or. -
+   (f$search( "private.dir;1") .eqs. "") .or. -
+   (f$search( "vms.dir;1") .eqs. ""))
+$ then
+$    write sys$output -
+      "   Can't find expected common OpenSSL directories in:"
+$    write sys$output "   ''ossl_dev_dir'"
+$    status = rms_e_fnf
+$    goto clean_up
+$ endif
+$!
+$ if ((f$search( "''arch_name_exe'_exe.dir;1") .eqs. "") .or. -
+   (f$search( "''arch_name'_lib.dir;1") .eqs. ""))
+$ then
+$    write sys$output -
+      "   Can't find expected architecture-specific OpenSSL directories in:"
+$    write sys$output "   ''ossl_dev_dir'"
+$    status = rms_e_fnf
+$    goto clean_up
+$ endif
+$!
+$! All seems well (enough).  Define the OpenSSL logical names.
+$!
+$ ossl_root = ossl_dev_dir- "]"+ ".]"
+$ define /translation_attributes = concealed /nolog'p1 SSLROOT 'ossl_root'
+$ define /nolog 'p1' SSLCERTS     sslroot:[certs]
+$ define /nolog 'p1' SSLINCLUDE   sslroot:[include]
+$ define /nolog 'p1' SSLPRIVATE   sslroot:[private]
+$ define /nolog 'p1' SSLEXE       sslroot:['arch_name_exe'_exe]
+$ define /nolog 'p1' SSLLIB       sslroot:['arch_name'_lib]
+$!
+$! Defining OPENSSL lets a C program use "#include <openssl/{foo}.h>":
+$ define /nolog 'p1' OPENSSL      SSLINCLUDE:
+$!
+$! Run a site-specific procedure, if it exists.
+$!
+$ if f$search( "sslroot:[vms]openssl_systartup.com") .nes."" then -
+   @ sslroot:[vms]openssl_systartup.com
+$!
+$! Restore the original default dev:[dir] (if known).
+$!
+$ clean_up:
+$!
+$ if (f$type( orig_dev_dir) .nes. "")
+$ then
+$    set default 'orig_dev_dir'
+$ endif
+$!
+$ EXIT 'status'
+$!

VMS/openssl_undo.com

@@ -0,0 +1,20 @@
+$!
+$! Deassign OpenSSL logical names.
+$!
+$ call deass "OPENSSL" "''p1'"
+$ call deass "SSLCERTS" "''p1'"
+$ call deass "SSLEXE" "''p1'"
+$ call deass "SSLINCLUDE" "''p1'"
+$ call deass "SSLLIB" "''p1'"
+$ call deass "SSLPRIVATE" "''p1'"
+$ call deass "SSLROOT" "''p1'"
+$!
+$ exit
+$!
+$deass: subroutine
+$ if (f$trnlnm( p1) .nes. "")
+$ then
+$    deassign 'p2' 'p1'
+$ endif
+$ endsubroutine
+$!

VMS/openssl_utils.com

@@ -8,31 +8,39 @@ $!
 $!
 $! Slightly modified by Richard Levitte <richard@levitte.org>
 $!
+$!
+$! Always define OPENSSL.  Others are optional (non-null P1).
+$!
 $ OPENSSL  :== $SSLEXE:OPENSSL
-$ VERIFY   :== $SSLEXE:OPENSSL VERIFY
-$ ASN1PARSE:== $SSLEXE:OPENSSL ASN1PARS
-$ REQ      :== $SSLEXE:OPENSSL REQ
-$ DGST     :== $SSLEXE:OPENSSL DGST
-$ DH       :== $SSLEXE:OPENSSL DH
-$ ENC      :== $SSLEXE:OPENSSL ENC
-$ GENDH    :== $SSLEXE:OPENSSL GENDH
-$ ERRSTR   :== $SSLEXE:OPENSSL ERRSTR
-$ CA       :== $SSLEXE:OPENSSL CA
-$ CRL      :== $SSLEXE:OPENSSL CRL
-$ RSA      :== $SSLEXE:OPENSSL RSA
-$ DSA      :== $SSLEXE:OPENSSL DSA
-$ DSAPARAM :== $SSLEXE:OPENSSL DSAPARAM
-$ X509     :== $SSLEXE:OPENSSL X509
-$ GENRSA   :== $SSLEXE:OPENSSL GENRSA
-$ GENDSA   :== $SSLEXE:OPENSSL GENDSA
-$ S_SERVER :== $SSLEXE:OPENSSL S_SERVER
-$ S_CLIENT :== $SSLEXE:OPENSSL S_CLIENT
-$ SPEED    :== $SSLEXE:OPENSSL SPEED
-$ S_TIME   :== $SSLEXE:OPENSSL S_TIME
-$ VERSION  :== $SSLEXE:OPENSSL VERSION
-$ PKCS7    :== $SSLEXE:OPENSSL PKCS7
-$ CRL2PKCS7:== $SSLEXE:OPENSSL CRL2P7
-$ SESS_ID  :== $SSLEXE:OPENSSL SESS_ID
-$ CIPHERS  :== $SSLEXE:OPENSSL CIPHERS
-$ NSEQ     :== $SSLEXE:OPENSSL NSEQ
-$ PKCS12   :== $SSLEXE:OPENSSL PKCS12
+$
+$ IF (P1 .NES. "")
+$ THEN
+$     VERIFY   :== $SSLEXE:OPENSSL VERIFY
+$     ASN1PARSE:== $SSLEXE:OPENSSL ASN1PARS
+$! REQ could conflict with REQUEST.
+$     OREQ     :== $SSLEXE:OPENSSL REQ
+$     DGST     :== $SSLEXE:OPENSSL DGST
+$     DH       :== $SSLEXE:OPENSSL DH
+$     ENC      :== $SSLEXE:OPENSSL ENC
+$     GENDH    :== $SSLEXE:OPENSSL GENDH
+$     ERRSTR   :== $SSLEXE:OPENSSL ERRSTR
+$     CA       :== $SSLEXE:OPENSSL CA
+$     CRL      :== $SSLEXE:OPENSSL CRL
+$     RSA      :== $SSLEXE:OPENSSL RSA
+$     DSA      :== $SSLEXE:OPENSSL DSA
+$     DSAPARAM :== $SSLEXE:OPENSSL DSAPARAM
+$     X509     :== $SSLEXE:OPENSSL X509
+$     GENRSA   :== $SSLEXE:OPENSSL GENRSA
+$     GENDSA   :== $SSLEXE:OPENSSL GENDSA
+$     S_SERVER :== $SSLEXE:OPENSSL S_SERVER
+$     S_CLIENT :== $SSLEXE:OPENSSL S_CLIENT
+$     SPEED    :== $SSLEXE:OPENSSL SPEED
+$     S_TIME   :== $SSLEXE:OPENSSL S_TIME
+$     VERSION  :== $SSLEXE:OPENSSL VERSION
+$     PKCS7    :== $SSLEXE:OPENSSL PKCS7
+$     CRL2PKCS7:== $SSLEXE:OPENSSL CRL2P7
+$     SESS_ID  :== $SSLEXE:OPENSSL SESS_ID
+$     CIPHERS  :== $SSLEXE:OPENSSL CIPHERS
+$     NSEQ     :== $SSLEXE:OPENSSL NSEQ
+$     PKCS12   :== $SSLEXE:OPENSSL PKCS12
+$ ENDIF

VMS/tcpip_shr_decc.opt

@@ -0,0 +1 @@
+sys$share:tcpip$ipc_shr.exe/share

VMS/test-includes.com

@@ -0,0 +1,28 @@
+$! Quick script to check how well including individual header files works
+$! on VMS, even when the VMS macro isn't defined.
+$
+$	sav_def = f$env("DEFAULT")
+$	here = f$parse("A.;0",f$ENV("PROCEDURE")) - "A.;0"
+$	set default 'here'
+$	set default [-.include.openssl]
+$	define openssl 'f$env("DEFAULT")'
+$	set default [--]
+$
+$ loop:
+$	f = f$search("openssl:*.h")
+$	if f .eqs. "" then goto loop_end
+$	write sys$output "Checking ",f
+$	open/write foo foo.c
+$	write foo "#undef VMS"
+$	write foo "#include <stdio.h>"
+$	write foo "#include <openssl/",f$parse(f,,,"NAME"),".h>"
+$	write foo "main()"
+$	write foo "{printf(""foo\n"");}"
+$	close foo
+$	cc/STANDARD=ANSI89/NOLIST/PREFIX=ALL foo.c
+$	delete foo.c;
+$	goto loop
+$ loop_end:
+$	set default 'save_def'
+$	exit
+

VMS/vms_idhacks.h

@@ -1,126 +0,0 @@
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef HEADER_VMS_IDHACKS_H
-#define HEADER_VMS_IDHACKS_H
-
-#ifdef VMS
-
-/* Hack the names created with DECLARE_STACK_OF(PKCS7_SIGNER_INFO) */
-#define sk_PKCS7_SIGNER_INFO_new	sk_PKCS7_SIGINF_new
-#define sk_PKCS7_SIGNER_INFO_new_null	sk_PKCS7_SIGINF_new_null
-#define sk_PKCS7_SIGNER_INFO_free	sk_PKCS7_SIGINF_free
-#define sk_PKCS7_SIGNER_INFO_num	sk_PKCS7_SIGINF_num
-#define sk_PKCS7_SIGNER_INFO_value	sk_PKCS7_SIGINF_value
-#define sk_PKCS7_SIGNER_INFO_set	sk_PKCS7_SIGINF_set
-#define sk_PKCS7_SIGNER_INFO_zero	sk_PKCS7_SIGINF_zero
-#define sk_PKCS7_SIGNER_INFO_push	sk_PKCS7_SIGINF_push
-#define sk_PKCS7_SIGNER_INFO_unshift	sk_PKCS7_SIGINF_unshift
-#define sk_PKCS7_SIGNER_INFO_find	sk_PKCS7_SIGINF_find
-#define sk_PKCS7_SIGNER_INFO_delete	sk_PKCS7_SIGINF_delete
-#define sk_PKCS7_SIGNER_INFO_delete_ptr	sk_PKCS7_SIGINF_delete_ptr
-#define sk_PKCS7_SIGNER_INFO_insert	sk_PKCS7_SIGINF_insert
-#define sk_PKCS7_SIGNER_INFO_set_cmp_func	sk_PKCS7_SIGINF_set_cmp_func
-#define sk_PKCS7_SIGNER_INFO_dup	sk_PKCS7_SIGINF_dup
-#define sk_PKCS7_SIGNER_INFO_pop_free	sk_PKCS7_SIGINF_pop_free
-#define sk_PKCS7_SIGNER_INFO_shift	sk_PKCS7_SIGINF_shift
-#define sk_PKCS7_SIGNER_INFO_pop	sk_PKCS7_SIGINF_pop
-#define sk_PKCS7_SIGNER_INFO_sort	sk_PKCS7_SIGINF_sort
-
-/* Hack the names created with DECLARE_STACK_OF(PKCS7_RECIP_INFO) */
-#define sk_PKCS7_RECIP_INFO_new		sk_PKCS7_RECINF_new
-#define sk_PKCS7_RECIP_INFO_new_null	sk_PKCS7_RECINF_new_null
-#define sk_PKCS7_RECIP_INFO_free	sk_PKCS7_RECINF_free
-#define sk_PKCS7_RECIP_INFO_num		sk_PKCS7_RECINF_num
-#define sk_PKCS7_RECIP_INFO_value	sk_PKCS7_RECINF_value
-#define sk_PKCS7_RECIP_INFO_set		sk_PKCS7_RECINF_set
-#define sk_PKCS7_RECIP_INFO_zero	sk_PKCS7_RECINF_zero
-#define sk_PKCS7_RECIP_INFO_push	sk_PKCS7_RECINF_push
-#define sk_PKCS7_RECIP_INFO_unshift	sk_PKCS7_RECINF_unshift
-#define sk_PKCS7_RECIP_INFO_find	sk_PKCS7_RECINF_find
-#define sk_PKCS7_RECIP_INFO_delete	sk_PKCS7_RECINF_delete
-#define sk_PKCS7_RECIP_INFO_delete_ptr	sk_PKCS7_RECINF_delete_ptr
-#define sk_PKCS7_RECIP_INFO_insert	sk_PKCS7_RECINF_insert
-#define sk_PKCS7_RECIP_INFO_set_cmp_func	sk_PKCS7_RECINF_set_cmp_func
-#define sk_PKCS7_RECIP_INFO_dup		sk_PKCS7_RECINF_dup
-#define sk_PKCS7_RECIP_INFO_pop_free	sk_PKCS7_RECINF_pop_free
-#define sk_PKCS7_RECIP_INFO_shift	sk_PKCS7_RECINF_shift
-#define sk_PKCS7_RECIP_INFO_pop		sk_PKCS7_RECINF_pop
-#define sk_PKCS7_RECIP_INFO_sort	sk_PKCS7_RECINF_sort
-
-/* Hack the names created with DECLARE_ASN1_SET_OF(PKCS7_SIGNER_INFO) */
-#define i2d_ASN1_SET_OF_PKCS7_SIGNER_INFO i2d_ASN1_SET_OF_PKCS7_SIGINF
-#define d2i_ASN1_SET_OF_PKCS7_SIGNER_INFO d2i_ASN1_SET_OF_PKCS7_SIGINF
-
-/* Hack the names created with DECLARE_ASN1_SET_OF(PKCS7_RECIP_INFO) */
-#define i2d_ASN1_SET_OF_PKCS7_RECIP_INFO i2d_ASN1_SET_OF_PKCS7_RECGINF
-#define d2i_ASN1_SET_OF_PKCS7_RECIP_INFO d2i_ASN1_SET_OF_PKCS7_RECGINF
-
-/* Hack the names created with DECLARE_PEM_rw(NETSCAPE_CERT_SEQUENCE) */
-#define PEM_read_NETSCAPE_CERT_SEQUENCE		PEM_read_NS_CERT_SEQUENCE
-#define PEM_write_NETSCAPE_CERT_SEQUENCE	PEM_write_NS_CERT_SEQUENCE
-#define PEM_read_bio_NETSCAPE_CERT_SEQUENCE	PEM_read_bio_NS_CERT_SEQUENCE
-#define PEM_write_bio_NETSCAPE_CERT_SEQUENCE	PEM_write_bio_NS_CERT_SEQUENCE
-#define PEM_write_cb_bio_NETSCAPE_CERT_SEQUENCE	PEM_write_cb_bio_NS_CERT_SEQUENCE
-
-/* Hack the names created with DECLARE_PEM_rw(PKCS8_PRIV_KEY_INFO) */
-#define PEM_read_PKCS8_PRIV_KEY_INFO		PEM_read_P8_PRIV_KEY_INFO
-#define PEM_write_PKCS8_PRIV_KEY_INFO		PEM_write_P8_PRIV_KEY_INFO
-#define PEM_read_bio_PKCS8_PRIV_KEY_INFO	PEM_read_bio_P8_PRIV_KEY_INFO
-#define PEM_write_bio_PKCS8_PRIV_KEY_INFO	PEM_write_bio_P8_PRIV_KEY_INFO
-#define PEM_write_cb_bio_PKCS8_PRIV_KEY_INFO	PEM_write_cb_bio_P8_PRIV_KEY_INFO
-
-#endif /* defined VMS */
-
-#endif /* ! defined HEADER_VMS_IDHACKS_H */

apps/.cvsignore

@@ -2,3 +2,7 @@ openssl
 Makefile.save
 der_chop
 der_chop.bak
+CA.pl
+*.flc
+semantic.cache
+*.dll

apps/CA.com

@@ -35,15 +35,27 @@ $ REQ    = openssl + " req " + SSLEAY_CONFIG
 $ CA     = openssl + " ca " + SSLEAY_CONFIG
 $ VERIFY = openssl + " verify"
 $ X509   = openssl + " x509"
+$ PKCS12 = openssl + " pkcs12"
 $ echo   = "write sys$Output"
+$ RET = 1
 $!
-$ s = F$PARSE(F$ENVIRONMENT("DEFAULT"),"[]") - "].;"
-$ CATOP  := 's'.demoCA
-$ CAKEY  := ]cakey.pem
-$ CACERT := ]cacert.pem
+$! 2010-12-20 SMS.
+$! Use a concealed logical name to reduce command line lengths, to
+$! avoid DCL errors on VAX:
+$!     %DCL-W-TKNOVF, command element is too long - shorten
+$! (Path segments like "openssl-1_0_1-stable-SNAP-20101217" accumulate
+$! quickly.)
+$!
+$ CATOP = F$PARSE( F$ENVIRONMENT( "DEFAULT"), "[]")- "].;"+ ".demoCA.]"
+$ define /translation_attributes = concealed CATOP 'CATOP'
+$!
+$ on error then goto clean_up
+$ on control_y then goto clean_up
+$!
+$ CAKEY  = "CATOP:[private]cakey.pem"
+$ CACERT = "CATOP:[000000]cacert.pem"
 $
 $ __INPUT := SYS$COMMAND
-$ RET = 1
 $!
 $ i = 1
 $opt_loop:
@@ -54,7 +66,7 @@ $
 $ IF (prog_opt .EQS. "?" .OR. prog_opt .EQS. "-h" .OR. prog_opt .EQS. "-help") 
 $ THEN
 $   echo "usage: CA -newcert|-newreq|-newca|-sign|-verify" 
-$   exit
+$   goto clean_up
 $ ENDIF
 $!
 $ IF (prog_opt .EQS. "-input")
@@ -68,7 +80,7 @@ $!
 $ IF (prog_opt .EQS. "-newcert")
 $ THEN
 $   ! Create a certificate.
-$   DEFINE/USER SYS$INPUT '__INPUT'
+$   DEFINE /USER_MODE SYS$INPUT '__INPUT'
 $   REQ -new -x509 -keyout newreq.pem -out newreq.pem 'DAYS'
 $   RET=$STATUS
 $   echo "Certificate (and private key) is in newreq.pem"
@@ -78,7 +90,7 @@ $!
 $ IF (prog_opt .EQS. "-newreq")
 $ THEN
 $   ! Create a certificate request
-$   DEFINE/USER SYS$INPUT '__INPUT'
+$   DEFINE /USER_MODE SYS$INPUT '__INPUT'
 $   REQ -new -keyout newreq.pem -out newreq.pem 'DAYS'
 $   RET=$STATUS
 $   echo "Request (and private key) is in newreq.pem"
@@ -89,42 +101,60 @@ $ IF (prog_opt .EQS. "-newca")
 $ THEN
 $   ! If explicitly asked for or it doesn't exist then setup the directory
 $   ! structure that Eric likes to manage things.
-$   IF F$SEARCH(CATOP+"]serial.") .EQS. ""
+$   IF F$SEARCH( "CATOP:[000000]serial.") .EQS. ""
 $   THEN
-$     CREATE /DIR /PROTECTION=OWNER:RWED 'CATOP']
-$     CREATE /DIR /PROTECTION=OWNER:RWED 'CATOP'.certs]
-$     CREATE /DIR /PROTECTION=OWNER:RWED 'CATOP'.crl]
-$     CREATE /DIR /PROTECTION=OWNER:RWED 'CATOP'.newcerts]
-$     CREATE /DIR /PROTECTION=OWNER:RWED 'CATOP'.private]
-$     OPEN   /WRITE ser_file 'CATOP']serial. 
+$     CREATE /DIRECTORY /PROTECTION=OWNER:RWED CATOP:[000000]
+$     CREATE /DIRECTORY /PROTECTION=OWNER:RWED CATOP:[certs]
+$     CREATE /DIRECTORY /PROTECTION=OWNER:RWED CATOP:[crl]
+$     CREATE /DIRECTORY /PROTECTION=OWNER:RWED CATOP:[newcerts]
+$     CREATE /DIRECTORY /PROTECTION=OWNER:RWED CATOP:[private]
+$
+$     OPEN /WRITE ser_file CATOP:[000000]serial. 
 $     WRITE ser_file "01"
 $     CLOSE ser_file
-$     APPEND/NEW NL: 'CATOP']index.txt
+$     APPEND /NEW_VERSION NL: CATOP:[000000]index.txt
+$
+$     ! The following is to make sure access() doesn't get confused.  It
+$     ! really needs one file in the directory to give correct answers...
+$     COPY NLA0: CATOP:[certs].;
+$     COPY NLA0: CATOP:[crl].;
+$     COPY NLA0: CATOP:[newcerts].;
+$     COPY NLA0: CATOP:[private].;
 $   ENDIF
 $!
-$   IF F$SEARCH(CATOP+".private"+CAKEY) .EQS. ""
+$   IF F$SEARCH( CAKEY) .EQS. ""
 $   THEN
 $     READ '__INPUT' FILE -
-	   /PROMT="CA certificate filename (or enter to create)"
-$     IF F$SEARCH(FILE) .NES. ""
+       /PROMPT="CA certificate filename (or enter to create): "
+$     IF (FILE .NES. "") .AND. (F$SEARCH(FILE) .NES. "")
 $     THEN
-$       COPY 'FILE' 'CATOP'.private'CAKEY'
-$	RET=$STATUS
+$       COPY 'FILE' 'CAKEY'
+$       RET=$STATUS
 $     ELSE
 $       echo "Making CA certificate ..."
-$       DEFINE/USER SYS$INPUT '__INPUT'
-$       REQ -new -x509 -keyout 'CATOP'.private'CAKEY' -
-		       -out 'CATOP''CACERT' 'DAYS'
-$	RET=$STATUS
+$       DEFINE /USER_MODE SYS$INPUT '__INPUT'
+$       REQ -new -x509 -keyout 'CAKEY' -out 'CACERT' 'DAYS'
+$       RET=$STATUS
 $     ENDIF
 $   ENDIF
 $   GOTO opt_loop_continue
 $ ENDIF
 $!
+$ IF (prog_opt .EQS. "-pkcs12")
+$ THEN
+$   i = i + 1
+$   cname = P'i'
+$   IF cname .EQS. "" THEN cname = "My certificate"
+$   PKCS12 -in newcert.pem -inkey newreq.pem -certfile 'CACERT' -
+     -out newcert.p12 -export -name "''cname'"
+$   RET=$STATUS
+$   goto clean_up
+$ ENDIF
+$!
 $ IF (prog_opt .EQS. "-xsign")
 $ THEN
 $!
-$   DEFINE/USER SYS$INPUT '__INPUT'
+$   DEFINE /USER_MODE SYS$INPUT '__INPUT'
 $   CA -policy policy_anything -infiles newreq.pem
 $   RET=$STATUS
 $   GOTO opt_loop_continue
@@ -133,7 +163,7 @@ $!
 $ IF ((prog_opt .EQS. "-sign") .OR. (prog_opt .EQS. "-signreq"))
 $ THEN
 $!   
-$   DEFINE/USER SYS$INPUT '__INPUT'
+$   DEFINE /USER_MODE SYS$INPUT '__INPUT'
 $   CA -policy policy_anything -out newcert.pem -infiles newreq.pem
 $   RET=$STATUS
 $   type newcert.pem
@@ -145,9 +175,9 @@ $ IF (prog_opt .EQS. "-signcert")
 $  THEN
 $!   
 $   echo "Cert passphrase will be requested twice - bug?"
-$   DEFINE/USER SYS$INPUT '__INPUT'
+$   DEFINE /USER_MODE SYS$INPUT '__INPUT'
 $   X509 -x509toreq -in newreq.pem -signkey newreq.pem -out tmp.pem
-$   DEFINE/USER SYS$INPUT '__INPUT'
+$   DEFINE /USER_MODE SYS$INPUT '__INPUT'
 $   CA -policy policy_anything -out newcert.pem -infiles tmp.pem
 y
 y
@@ -162,17 +192,17 @@ $!
 $   i = i + 1
 $   IF (p'i' .EQS. "")
 $   THEN
-$     DEFINE/USER SYS$INPUT '__INPUT'
-$     VERIFY "-CAfile" 'CATOP''CACERT' newcert.pem
+$     DEFINE /USER_MODE SYS$INPUT '__INPUT'
+$     VERIFY "-CAfile" 'CACERT' newcert.pem
 $   ELSE
 $     j = i
 $    verify_opt_loop:
 $     IF j .GT. 8 THEN GOTO verify_opt_loop_end
 $     IF p'j' .NES. ""
 $     THEN 
-$       DEFINE/USER SYS$INPUT '__INPUT'
+$       DEFINE /USER_MODE SYS$INPUT '__INPUT'
 $       __tmp = p'j'
-$       VERIFY "-CAfile" 'CATOP''CACERT' '__tmp'
+$       VERIFY "-CAfile" 'CACERT' '__tmp'
 $       tmp=$STATUS
 $       IF tmp .NE. 0 THEN RET=tmp
 $     ENDIF
@@ -188,8 +218,8 @@ $ IF (prog_opt .NES. "")
 $ THEN
 $!   
 $   echo "Unknown argument ''prog_opt'"
-$   
-$   EXIT 3
+$   RET = 3
+$   goto clean_up
 $ ENDIF
 $
 $opt_loop_continue:
@@ -197,4 +227,10 @@ $ i = i + 1
 $ GOTO opt_loop
 $
 $opt_loop_end:
+$!
+$clean_up:
+$!
+$ if f$trnlnm( "CATOP", "LNM$PROCESS") .nes. "" then -
+   deassign /process CATOP
+$!
 $ EXIT 'RET'

apps/CA.pl.in

@@ -5,7 +5,7 @@
 #      things easier between now and when Eric is convinced to fix it :-)
 #
 # CA -newca ... will setup the right stuff
-# CA -newreq ... will generate a certificate request 
+# CA -newreq[-nodes] ... will generate a certificate request 
 # CA -sign ... will sign the generated request and output 
 #
 # At the end of that grab newreq.pem and newcert.pem (one has the key 
@@ -36,14 +36,26 @@
 # default openssl.cnf file has setup as per the following
 # demoCA ... where everything is stored
 
-$DAYS="-days 365";
-$REQ="openssl req $SSLEAY_CONFIG";
-$CA="openssl ca $SSLEAY_CONFIG";
-$VERIFY="openssl verify";
-$X509="openssl x509";
+my $openssl;
+if(defined $ENV{OPENSSL}) {
+	$openssl = $ENV{OPENSSL};
+} else {
+	$openssl = "openssl";
+	$ENV{OPENSSL} = $openssl;
+}
+
+$SSLEAY_CONFIG=$ENV{"SSLEAY_CONFIG"};
+$DAYS="-days 365";	# 1 year
+$CADAYS="-days 1095";	# 3 years
+$REQ="$openssl req $SSLEAY_CONFIG";
+$CA="$openssl ca $SSLEAY_CONFIG";
+$VERIFY="$openssl verify";
+$X509="$openssl x509";
+$PKCS12="$openssl pkcs12";
 
 $CATOP="./demoCA";
 $CAKEY="cakey.pem";
+$CAREQ="careq.pem";
 $CACERT="cacert.pem";
 
 $DIRMODE = 0777;
@@ -52,20 +64,25 @@ $RET = 0;
 
 foreach (@ARGV) {
 	if ( /^(-\?|-h|-help)$/ ) {
-	    print STDERR "usage: CA -newcert|-newreq|-newca|-sign|-verify\n";
+	    print STDERR "usage: CA -newcert|-newreq|-newreq-nodes|-newca|-sign|-verify\n";
 	    exit 0;
 	} elsif (/^-newcert$/) {
 	    # create a certificate
-	    system ("$REQ -new -x509 -keyout newreq.pem -out newreq.pem $DAYS");
+	    system ("$REQ -new -x509 -keyout newkey.pem -out newcert.pem $DAYS");
 	    $RET=$?;
-	    print "Certificate (and private key) is in newreq.pem\n"
+	    print "Certificate is in newcert.pem, private key is in newkey.pem\n"
 	} elsif (/^-newreq$/) {
 	    # create a certificate request
-	    system ("$REQ -new -keyout newreq.pem -out newreq.pem $DAYS");
+	    system ("$REQ -new -keyout newkey.pem -out newreq.pem $DAYS");
 	    $RET=$?;
-	    print "Request (and private key) is in newreq.pem\n";
+	    print "Request is in newreq.pem, private key is in newkey.pem\n";
+	} elsif (/^-newreq-nodes$/) {
+	    # create a certificate request
+	    system ("$REQ -new -nodes -keyout newkey.pem -out newreq.pem $DAYS");
+	    $RET=$?;
+	    print "Request is in newreq.pem, private key is in newkey.pem\n";
 	} elsif (/^-newca$/) {
-		# if explictly asked for or it doesn't exist then setup the
+		# if explicitly asked for or it doesn't exist then setup the
 		# directory structure that Eric likes to manage things 
 	    $NEW="1";
 	    if ( "$NEW" || ! -f "${CATOP}/serial" ) {
@@ -75,11 +92,11 @@ foreach (@ARGV) {
 		mkdir "${CATOP}/crl", $DIRMODE ;
 		mkdir "${CATOP}/newcerts", $DIRMODE;
 		mkdir "${CATOP}/private", $DIRMODE;
-		open OUT, ">${CATOP}/serial";
-		print OUT "01\n";
-		close OUT;
 		open OUT, ">${CATOP}/index.txt";
 		close OUT;
+		open OUT, ">${CATOP}/crlnumber";
+		print OUT "01\n";
+		close OUT;
 	    }
 	    if ( ! -f "${CATOP}/private/$CAKEY" ) {
 		print "CA certificate filename (or enter to create)\n";
@@ -94,11 +111,25 @@ foreach (@ARGV) {
 		    $RET=$?;
 		} else {
 		    print "Making CA certificate ...\n";
-		    system ("$REQ -new -x509 -keyout " .
-			"${CATOP}/private/$CAKEY -out ${CATOP}/$CACERT $DAYS");
+		    system ("$REQ -new -keyout " .
+			"${CATOP}/private/$CAKEY -out ${CATOP}/$CAREQ");
+		    system ("$CA -create_serial " .
+			"-out ${CATOP}/$CACERT $CADAYS -batch " . 
+			"-keyfile ${CATOP}/private/$CAKEY -selfsign " .
+			"-extensions v3_ca " .
+			"-infiles ${CATOP}/$CAREQ ");
 		    $RET=$?;
 		}
 	    }
+	} elsif (/^-pkcs12$/) {
+	    my $cname = $ARGV[1];
+	    $cname = "My Certificate" unless defined $cname;
+	    system ("$PKCS12 -in newcert.pem -inkey newkey.pem " .
+			"-certfile ${CATOP}/$CACERT -out newcert.p12 " .
+			"-export -name \"$cname\"");
+	    $RET=$?;
+	    print "PKCS #12 file is in newcert.p12\n";
+	    exit $RET;
 	} elsif (/^-xsign$/) {
 	    system ("$CA -policy policy_anything -infiles newreq.pem");
 	    $RET=$?;
@@ -107,6 +138,11 @@ foreach (@ARGV) {
 							"-infiles newreq.pem");
 	    $RET=$?;
 	    print "Signed certificate is in newcert.pem\n";
+	} elsif (/^(-signCA)$/) {
+	    system ("$CA -policy policy_anything -out newcert.pem " .
+					"-extensions v3_ca -infiles newreq.pem");
+	    $RET=$?;
+	    print "Signed CA certificate is in newcert.pem\n";
 	} elsif (/^-signcert$/) {
 	    system ("$X509 -x509toreq -in newreq.pem -signkey newreq.pem " .
 								"-out tmp.pem");
@@ -128,7 +164,7 @@ foreach (@ARGV) {
 	    }
 	} else {
 	    print STDERR "Unknown arg $_\n";
-	    print STDERR "usage: CA -newcert|-newreq|-newca|-sign|-verify\n";
+	    print STDERR "usage: CA -newcert|-newreq|-newreq-nodes|-newca|-sign|-verify\n";
 	    exit 1;
 	}
 }

apps/CA.sh

@@ -5,10 +5,10 @@
 #      things easier between now and when Eric is convinced to fix it :-)
 #
 # CA -newca ... will setup the right stuff
-# CA -newreq ... will generate a certificate request 
-# CA -sign ... will sign the generated request and output 
+# CA -newreq ... will generate a certificate request
+# CA -sign ... will sign the generated request and output
 #
-# At the end of that grab newreq.pem and newcert.pem (one has the key 
+# At the end of that grab newreq.pem and newcert.pem (one has the key
 # and the other the certificate) and cat them together and that is what
 # you want/need ... I'll make even this a little cleaner later.
 #
@@ -16,8 +16,8 @@
 # 12-Jan-96 tjh    Added more things ... including CA -signcert which
 #                  converts a certificate to a request and then signs it.
 # 10-Jan-96 eay    Fixed a few more bugs and added the SSLEAY_CONFIG
-#		   environment variable so this can be driven from
-#		   a script.
+#                  environment variable so this can be driven from
+#                  a script.
 # 25-Jul-96 eay    Cleaned up filenames some more.
 # 11-Jun-96 eay    Fixed a few filename missmatches.
 # 03-May-96 eay    Modified to use 'ssleay cmd' instead of 'cmd'.
@@ -29,48 +29,87 @@
 
 # default openssl.cnf file has setup as per the following
 # demoCA ... where everything is stored
+cp_pem() {
+    infile=$1
+    outfile=$2
+    bound=$3
+    flag=0
+    exec <$infile;
+    while read line; do
+	if [ $flag -eq 1 ]; then
+		echo $line|grep "^-----END.*$bound"  2>/dev/null 1>/dev/null
+		if [ $? -eq 0 ] ; then
+			echo $line >>$outfile
+			break
+		else
+			echo $line >>$outfile
+		fi
+	fi
 
-DAYS="-days 365"
-REQ="openssl req $SSLEAY_CONFIG"
-CA="openssl ca $SSLEAY_CONFIG"
-VERIFY="openssl verify"
-X509="openssl x509"
+	echo $line|grep "^-----BEGIN.*$bound"  2>/dev/null 1>/dev/null
+	if [ $? -eq 0 ]; then
+		echo $line >$outfile
+		flag=1
+	fi
+    done
+}
 
-CATOP=./demoCA
+usage() {
+ echo "usage: $0 -newcert|-newreq|-newreq-nodes|-newca|-sign|-verify" >&2
+}
+
+if [ -z "$OPENSSL" ]; then OPENSSL=openssl; fi
+
+if [ -z "$DAYS" ] ; then DAYS="-days 365" ; fi	# 1 year
+CADAYS="-days 1095"	# 3 years
+REQ="$OPENSSL req $SSLEAY_CONFIG"
+CA="$OPENSSL ca $SSLEAY_CONFIG"
+VERIFY="$OPENSSL verify"
+X509="$OPENSSL x509"
+PKCS12="openssl pkcs12"
+
+if [ -z "$CATOP" ] ; then CATOP=./demoCA ; fi
 CAKEY=./cakey.pem
+CAREQ=./careq.pem
 CACERT=./cacert.pem
 
-for i
-do
-case $i in
+RET=0
+
+while [ "$1" != "" ] ; do
+case $1 in
 -\?|-h|-help)
-    echo "usage: CA -newcert|-newreq|-newca|-sign|-verify" >&2
+    usage
     exit 0
     ;;
--newcert) 
+-newcert)
     # create a certificate
-    $REQ -new -x509 -keyout newreq.pem -out newreq.pem $DAYS
+    $REQ -new -x509 -keyout newkey.pem -out newcert.pem $DAYS
     RET=$?
-    echo "Certificate (and private key) is in newreq.pem"
+    echo "Certificate is in newcert.pem, private key is in newkey.pem"
     ;;
--newreq) 
+-newreq)
     # create a certificate request
-    $REQ -new -keyout newreq.pem -out newreq.pem $DAYS
+    $REQ -new -keyout newkey.pem -out newreq.pem $DAYS
+    RET=$?
+    echo "Request is in newreq.pem, private key is in newkey.pem"
+    ;;
+-newreq-nodes) 
+    # create a certificate request
+    $REQ -new -nodes -keyout newreq.pem -out newreq.pem $DAYS
     RET=$?
     echo "Request (and private key) is in newreq.pem"
     ;;
--newca)     
-    # if explictly asked for or it doesn't exist then setup the directory
-    # structure that Eric likes to manage things 
+-newca)
+    # if explicitly asked for or it doesn't exist then setup the directory
+    # structure that Eric likes to manage things
     NEW="1"
     if [ "$NEW" -o ! -f ${CATOP}/serial ]; then
 	# create the directory hierarchy
-	mkdir ${CATOP} 
-	mkdir ${CATOP}/certs 
-	mkdir ${CATOP}/crl 
-	mkdir ${CATOP}/newcerts
-	mkdir ${CATOP}/private
-	echo "01" > ${CATOP}/serial
+	mkdir -p ${CATOP}
+	mkdir -p ${CATOP}/certs
+	mkdir -p ${CATOP}/crl
+	mkdir -p ${CATOP}/newcerts
+	mkdir -p ${CATOP}/private
 	touch ${CATOP}/index.txt
     fi
     if [ ! -f ${CATOP}/private/$CAKEY ]; then
@@ -79,34 +118,60 @@ case $i in
 
 	# ask user for existing CA certificate
 	if [ "$FILE" ]; then
-	    cp $FILE ${CATOP}/private/$CAKEY
+	    cp_pem $FILE ${CATOP}/private/$CAKEY PRIVATE
+	    cp_pem $FILE ${CATOP}/$CACERT CERTIFICATE
 	    RET=$?
+	    if [ ! -f "${CATOP}/serial" ]; then
+		$X509 -in ${CATOP}/$CACERT -noout -next_serial \
+		      -out ${CATOP}/serial
+	    fi
 	else
 	    echo "Making CA certificate ..."
-	    $REQ -new -x509 -keyout ${CATOP}/private/$CAKEY \
-			   -out ${CATOP}/$CACERT $DAYS
+	    $REQ -new -keyout ${CATOP}/private/$CAKEY \
+			   -out ${CATOP}/$CAREQ
+	    $CA -create_serial -out ${CATOP}/$CACERT $CADAYS -batch \
+			   -keyfile ${CATOP}/private/$CAKEY -selfsign \
+			   -extensions v3_ca \
+			   -infiles ${CATOP}/$CAREQ
 	    RET=$?
 	fi
     fi
     ;;
 -xsign)
-    $CA -policy policy_anything -infiles newreq.pem 
+    $CA -policy policy_anything -infiles newreq.pem
     RET=$?
     ;;
--sign|-signreq) 
+-pkcs12)
+    if [ -z "$2" ] ; then
+	CNAME="My Certificate"
+    else
+	CNAME="$2"
+    fi
+    $PKCS12 -in newcert.pem -inkey newreq.pem -certfile ${CATOP}/$CACERT \
+	    -out newcert.p12 -export -name "$CNAME"
+    RET=$?
+    exit $RET
+    ;;
+-sign|-signreq)
     $CA -policy policy_anything -out newcert.pem -infiles newreq.pem
     RET=$?
     cat newcert.pem
     echo "Signed certificate is in newcert.pem"
     ;;
--signcert) 
+-signCA)
+    $CA -policy policy_anything -out newcert.pem -extensions v3_ca -infiles newreq.pem
+    RET=$?
+    echo "Signed CA certificate is in newcert.pem"
+    ;;
+-signcert)
     echo "Cert passphrase will be requested twice - bug?"
     $X509 -x509toreq -in newreq.pem -signkey newreq.pem -out tmp.pem
     $CA -policy policy_anything -out newcert.pem -infiles tmp.pem
+    RET=$?
     cat newcert.pem
     echo "Signed certificate is in newcert.pem"
     ;;
--verify) 
+-verify)
     shift
     if [ -z "$1" ]; then
 	    $VERIFY -CAfile $CATOP/$CACERT newcert.pem
@@ -120,13 +185,14 @@ case $i in
 	    fi
 	done
     fi
-    exit 0
+    exit $RET
     ;;
 *)
-    echo "Unknown arg $i";
+    echo "Unknown arg $i" >&2
+    usage
     exit 1
     ;;
 esac
+shift
 done
 exit $RET
-

apps/Makefile.ssl

@@ -1,727 +0,0 @@
-#
-#  apps/Makefile.ssl
-#
-
-DIR=		apps
-TOP=		..
-CC=		cc
-INCLUDES=	-I../include
-CFLAG=		-g -static
-INSTALL_PREFIX=
-INSTALLTOP=	/usr/local/ssl
-OPENSSLDIR=	/usr/local/ssl
-MAKE=		make -f Makefile.ssl
-MAKEDEPEND=	$(TOP)/util/domd $(TOP)
-MAKEFILE=	Makefile.ssl
-RM=		rm -f
-
-PEX_LIBS=
-EX_LIBS= 
-
-CFLAGS= -DMONOLITH $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile makeapps.com install.com
-
-DLIBCRYPTO=../libcrypto.a
-DLIBSSL=../libssl.a
-LIBCRYPTO=-L.. -lcrypto
-LIBSSL=-L.. -lssl
-
-PROGRAM= openssl
-
-SCRIPTS=CA.sh CA.pl der_chop
-
-EXE= $(PROGRAM)
-
-E_EXE=	verify asn1pars req dgst dh enc gendh errstr ca crl \
-	rsa dsa dsaparam \
-	x509 genrsa gendsa s_server s_client speed \
-	s_time version pkcs7 crl2pkcs7 sess_id ciphers nseq pkcs12 \
-	pkcs8
-
-PROGS= $(PROGRAM).c
-
-A_OBJ=apps.o
-A_SRC=apps.c
-S_OBJ=	s_cb.o s_socket.o
-S_SRC=	s_cb.c s_socket.c
-
-E_OBJ=	verify.o asn1pars.o req.o dgst.o dh.o enc.o gendh.o errstr.o ca.o \
-	pkcs7.o crl2p7.o crl.o \
-	rsa.o dsa.o dsaparam.o \
-	x509.o genrsa.o gendsa.o s_server.o s_client.o speed.o \
-	s_time.o $(A_OBJ) $(S_OBJ) version.o sess_id.o \
-	ciphers.o nseq.o pkcs12.o pkcs8.o
-
-#	pem_mail.o
-
-E_SRC=	verify.c asn1pars.c req.c dgst.c dh.c enc.c gendh.c errstr.c ca.c \
-	pkcs7.c crl2p7.c crl.c \
-	rsa.c dsa.c dsaparam.c \
-	x509.c genrsa.c gendsa.c s_server.c s_client.c speed.c \
-	s_time.c $(A_SRC) $(S_SRC) version.c sess_id.c \
-	ciphers.c nseq.c pkcs12.c pkcs8.c
-
-#	pem_mail.c
-
-SRC=$(E_SRC)
-
-EXHEADER=
-HEADER=	apps.h progs.h s_apps.h \
-	testdsa.h testrsa.h \
-	$(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	@(cd ..; $(MAKE) DIRS=$(DIR) all)
-
-all:	exe
-
-exe:	$(EXE)
-
-req: sreq.o $(A_OBJ) $(DLIBCRYPTO)
-	$(CC) -o req $(CFLAG) sreq.o $(A_OBJ) $(PEX_LIBS) $(LIBCRYPTO) $(EX_LIBS)
-
-sreq.o: req.c 
-	$(CC) -c $(INCLUDES) $(CFLAG) -o sreq.o req.c
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile.ssl >> $(TOP)/MINFO
-
-install:
-	@for i in $(EXE); \
-	do  \
-	(echo installing $$i; \
-	 cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i; \
-	 chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i ); \
-	 done;
-	@for i in $(SCRIPTS); \
-	do  \
-	(echo installing $$i; \
-	 cp $$i $(INSTALL_PREFIX)$(OPENSSLDIR)/misc/$$i; \
-	 chmod 755 $(INSTALL_PREFIX)$(OPENSSLDIR)/misc/$$i ); \
-	 done
-	@cp openssl.cnf $(INSTALL_PREFIX)$(OPENSSLDIR); \
-	chmod 644 $(INSTALL_PREFIX)$(OPENSSLDIR)/openssl.cnf
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-links:
-	@$(TOP)/util/point.sh Makefile.ssl Makefile
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	$(MAKEDEPEND) $(INCLUDES) $(DEPFLAG) $(PROGS) $(SRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff $(EXE)
-	rm -f req
-
-$(DLIBSSL):
-	(cd ../ssl; $(MAKE))
-
-$(DLIBCRYPTO):
-	(cd ../crypto; $(MAKE))
-
-$(PROGRAM): progs.h $(E_OBJ) $(PROGRAM).o $(DLIBCRYPTO) $(DLIBSSL)
-	$(RM) $(PROGRAM)
-	$(CC) -o $(PROGRAM) $(CFLAGS) $(PROGRAM).o $(E_OBJ) $(PEX_LIBS) $(LIBSSL) $(LIBCRYPTO) $(EX_LIBS)
-	@(cd ..; OPENSSL="`pwd`/apps/openssl"; export OPENSSL; sh tools/c_rehash certs)
-
-progs.h:
-	$(PERL) ./progs.pl $(E_EXE) >progs.h
-	$(RM) $(PROGRAM).o
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-apps.o: ../include/openssl/bio.h ../include/openssl/buffer.h
-apps.o: ../include/openssl/crypto.h ../include/openssl/e_os.h
-apps.o: ../include/openssl/e_os2.h ../include/openssl/opensslconf.h
-apps.o: ../include/openssl/opensslv.h ../include/openssl/stack.h apps.h progs.h
-asn1pars.o: ../include/openssl/asn1.h ../include/openssl/bio.h
-asn1pars.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
-asn1pars.o: ../include/openssl/buffer.h ../include/openssl/cast.h
-asn1pars.o: ../include/openssl/crypto.h ../include/openssl/des.h
-asn1pars.o: ../include/openssl/dh.h ../include/openssl/dsa.h
-asn1pars.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-asn1pars.o: ../include/openssl/err.h ../include/openssl/evp.h
-asn1pars.o: ../include/openssl/idea.h ../include/openssl/md2.h
-asn1pars.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
-asn1pars.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-asn1pars.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-asn1pars.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-asn1pars.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
-asn1pars.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
-asn1pars.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
-asn1pars.o: ../include/openssl/sha.h ../include/openssl/stack.h
-asn1pars.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
-asn1pars.o: progs.h
-ca.o: ../include/openssl/asn1.h ../include/openssl/bio.h
-ca.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
-ca.o: ../include/openssl/buffer.h ../include/openssl/cast.h
-ca.o: ../include/openssl/conf.h ../include/openssl/crypto.h
-ca.o: ../include/openssl/des.h ../include/openssl/dh.h ../include/openssl/dsa.h
-ca.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-ca.o: ../include/openssl/err.h ../include/openssl/evp.h
-ca.o: ../include/openssl/idea.h ../include/openssl/lhash.h
-ca.o: ../include/openssl/md2.h ../include/openssl/md5.h
-ca.o: ../include/openssl/mdc2.h ../include/openssl/objects.h
-ca.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-ca.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-ca.o: ../include/openssl/pkcs7.h ../include/openssl/rc2.h
-ca.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
-ca.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
-ca.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-ca.o: ../include/openssl/stack.h ../include/openssl/txt_db.h
-ca.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
-ca.o: ../include/openssl/x509v3.h apps.h progs.h
-ciphers.o: ../include/openssl/asn1.h ../include/openssl/bio.h
-ciphers.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
-ciphers.o: ../include/openssl/buffer.h ../include/openssl/cast.h
-ciphers.o: ../include/openssl/crypto.h ../include/openssl/des.h
-ciphers.o: ../include/openssl/dh.h ../include/openssl/dsa.h
-ciphers.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-ciphers.o: ../include/openssl/err.h ../include/openssl/evp.h
-ciphers.o: ../include/openssl/idea.h ../include/openssl/lhash.h
-ciphers.o: ../include/openssl/md2.h ../include/openssl/md5.h
-ciphers.o: ../include/openssl/mdc2.h ../include/openssl/objects.h
-ciphers.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-ciphers.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-ciphers.o: ../include/openssl/pkcs7.h ../include/openssl/rc2.h
-ciphers.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
-ciphers.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
-ciphers.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-ciphers.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
-ciphers.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
-ciphers.o: ../include/openssl/stack.h ../include/openssl/tls1.h
-ciphers.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
-ciphers.o: progs.h
-crl.o: ../include/openssl/asn1.h ../include/openssl/bio.h
-crl.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
-crl.o: ../include/openssl/buffer.h ../include/openssl/cast.h
-crl.o: ../include/openssl/conf.h ../include/openssl/crypto.h
-crl.o: ../include/openssl/des.h ../include/openssl/dh.h
-crl.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
-crl.o: ../include/openssl/e_os2.h ../include/openssl/err.h
-crl.o: ../include/openssl/evp.h ../include/openssl/idea.h
-crl.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-crl.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
-crl.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-crl.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-crl.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-crl.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
-crl.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
-crl.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
-crl.o: ../include/openssl/sha.h ../include/openssl/stack.h
-crl.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
-crl.o: ../include/openssl/x509v3.h apps.h progs.h
-crl2p7.o: ../include/openssl/asn1.h ../include/openssl/bio.h
-crl2p7.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
-crl2p7.o: ../include/openssl/buffer.h ../include/openssl/cast.h
-crl2p7.o: ../include/openssl/crypto.h ../include/openssl/des.h
-crl2p7.o: ../include/openssl/dh.h ../include/openssl/dsa.h
-crl2p7.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-crl2p7.o: ../include/openssl/err.h ../include/openssl/evp.h
-crl2p7.o: ../include/openssl/idea.h ../include/openssl/md2.h
-crl2p7.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
-crl2p7.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-crl2p7.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-crl2p7.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-crl2p7.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
-crl2p7.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
-crl2p7.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
-crl2p7.o: ../include/openssl/sha.h ../include/openssl/stack.h
-crl2p7.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
-crl2p7.o: progs.h
-dgst.o: ../include/openssl/asn1.h ../include/openssl/bio.h
-dgst.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
-dgst.o: ../include/openssl/buffer.h ../include/openssl/cast.h
-dgst.o: ../include/openssl/crypto.h ../include/openssl/des.h
-dgst.o: ../include/openssl/dh.h ../include/openssl/dsa.h
-dgst.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-dgst.o: ../include/openssl/err.h ../include/openssl/evp.h
-dgst.o: ../include/openssl/idea.h ../include/openssl/md2.h
-dgst.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
-dgst.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-dgst.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-dgst.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-dgst.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
-dgst.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
-dgst.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
-dgst.o: ../include/openssl/sha.h ../include/openssl/stack.h
-dgst.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h progs.h
-dh.o: ../include/openssl/asn1.h ../include/openssl/bio.h
-dh.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
-dh.o: ../include/openssl/buffer.h ../include/openssl/cast.h
-dh.o: ../include/openssl/crypto.h ../include/openssl/des.h
-dh.o: ../include/openssl/dh.h ../include/openssl/dsa.h
-dh.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-dh.o: ../include/openssl/err.h ../include/openssl/evp.h
-dh.o: ../include/openssl/idea.h ../include/openssl/md2.h
-dh.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
-dh.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-dh.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-dh.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-dh.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
-dh.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
-dh.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
-dh.o: ../include/openssl/sha.h ../include/openssl/stack.h
-dh.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h progs.h
-dsa.o: ../include/openssl/asn1.h ../include/openssl/bio.h
-dsa.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
-dsa.o: ../include/openssl/buffer.h ../include/openssl/cast.h
-dsa.o: ../include/openssl/crypto.h ../include/openssl/des.h
-dsa.o: ../include/openssl/dh.h ../include/openssl/dsa.h
-dsa.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-dsa.o: ../include/openssl/err.h ../include/openssl/evp.h
-dsa.o: ../include/openssl/idea.h ../include/openssl/md2.h
-dsa.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
-dsa.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-dsa.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-dsa.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-dsa.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
-dsa.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
-dsa.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
-dsa.o: ../include/openssl/sha.h ../include/openssl/stack.h
-dsa.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h progs.h
-dsaparam.o: ../include/openssl/asn1.h ../include/openssl/bio.h
-dsaparam.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
-dsaparam.o: ../include/openssl/buffer.h ../include/openssl/cast.h
-dsaparam.o: ../include/openssl/crypto.h ../include/openssl/des.h
-dsaparam.o: ../include/openssl/dh.h ../include/openssl/dsa.h
-dsaparam.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-dsaparam.o: ../include/openssl/err.h ../include/openssl/evp.h
-dsaparam.o: ../include/openssl/idea.h ../include/openssl/md2.h
-dsaparam.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
-dsaparam.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-dsaparam.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-dsaparam.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-dsaparam.o: ../include/openssl/rand.h ../include/openssl/rc2.h
-dsaparam.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
-dsaparam.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
-dsaparam.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-dsaparam.o: ../include/openssl/stack.h ../include/openssl/x509.h
-dsaparam.o: ../include/openssl/x509_vfy.h apps.h progs.h
-enc.o: ../include/openssl/asn1.h ../include/openssl/bio.h
-enc.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
-enc.o: ../include/openssl/buffer.h ../include/openssl/cast.h
-enc.o: ../include/openssl/crypto.h ../include/openssl/des.h
-enc.o: ../include/openssl/dh.h ../include/openssl/dsa.h
-enc.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-enc.o: ../include/openssl/err.h ../include/openssl/evp.h
-enc.o: ../include/openssl/idea.h ../include/openssl/md2.h
-enc.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
-enc.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-enc.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-enc.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-enc.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
-enc.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
-enc.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
-enc.o: ../include/openssl/sha.h ../include/openssl/stack.h
-enc.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h progs.h
-errstr.o: ../include/openssl/asn1.h ../include/openssl/bio.h
-errstr.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
-errstr.o: ../include/openssl/buffer.h ../include/openssl/cast.h
-errstr.o: ../include/openssl/crypto.h ../include/openssl/des.h
-errstr.o: ../include/openssl/dh.h ../include/openssl/dsa.h
-errstr.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-errstr.o: ../include/openssl/err.h ../include/openssl/evp.h
-errstr.o: ../include/openssl/idea.h ../include/openssl/lhash.h
-errstr.o: ../include/openssl/md2.h ../include/openssl/md5.h
-errstr.o: ../include/openssl/mdc2.h ../include/openssl/objects.h
-errstr.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-errstr.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-errstr.o: ../include/openssl/pkcs7.h ../include/openssl/rc2.h
-errstr.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
-errstr.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
-errstr.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-errstr.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
-errstr.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
-errstr.o: ../include/openssl/stack.h ../include/openssl/tls1.h
-errstr.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
-errstr.o: progs.h
-gendh.o: ../include/openssl/asn1.h ../include/openssl/bio.h
-gendh.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
-gendh.o: ../include/openssl/buffer.h ../include/openssl/cast.h
-gendh.o: ../include/openssl/crypto.h ../include/openssl/des.h
-gendh.o: ../include/openssl/dh.h ../include/openssl/dsa.h
-gendh.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-gendh.o: ../include/openssl/err.h ../include/openssl/evp.h
-gendh.o: ../include/openssl/idea.h ../include/openssl/md2.h
-gendh.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
-gendh.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-gendh.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-gendh.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-gendh.o: ../include/openssl/rand.h ../include/openssl/rc2.h
-gendh.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
-gendh.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
-gendh.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-gendh.o: ../include/openssl/stack.h ../include/openssl/x509.h
-gendh.o: ../include/openssl/x509_vfy.h apps.h progs.h
-gendsa.o: ../include/openssl/asn1.h ../include/openssl/bio.h
-gendsa.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
-gendsa.o: ../include/openssl/buffer.h ../include/openssl/cast.h
-gendsa.o: ../include/openssl/crypto.h ../include/openssl/des.h
-gendsa.o: ../include/openssl/dh.h ../include/openssl/dsa.h
-gendsa.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-gendsa.o: ../include/openssl/err.h ../include/openssl/evp.h
-gendsa.o: ../include/openssl/idea.h ../include/openssl/md2.h
-gendsa.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
-gendsa.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-gendsa.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-gendsa.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-gendsa.o: ../include/openssl/rand.h ../include/openssl/rc2.h
-gendsa.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
-gendsa.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
-gendsa.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-gendsa.o: ../include/openssl/stack.h ../include/openssl/x509.h
-gendsa.o: ../include/openssl/x509_vfy.h apps.h progs.h
-genrsa.o: ../include/openssl/asn1.h ../include/openssl/bio.h
-genrsa.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
-genrsa.o: ../include/openssl/buffer.h ../include/openssl/cast.h
-genrsa.o: ../include/openssl/crypto.h ../include/openssl/des.h
-genrsa.o: ../include/openssl/dh.h ../include/openssl/dsa.h
-genrsa.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-genrsa.o: ../include/openssl/err.h ../include/openssl/evp.h
-genrsa.o: ../include/openssl/idea.h ../include/openssl/md2.h
-genrsa.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
-genrsa.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-genrsa.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-genrsa.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-genrsa.o: ../include/openssl/rand.h ../include/openssl/rc2.h
-genrsa.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
-genrsa.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
-genrsa.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-genrsa.o: ../include/openssl/stack.h ../include/openssl/x509.h
-genrsa.o: ../include/openssl/x509_vfy.h apps.h progs.h
-nseq.o: ../include/openssl/asn1.h ../include/openssl/bio.h
-nseq.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
-nseq.o: ../include/openssl/buffer.h ../include/openssl/cast.h
-nseq.o: ../include/openssl/crypto.h ../include/openssl/des.h
-nseq.o: ../include/openssl/dh.h ../include/openssl/dsa.h
-nseq.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-nseq.o: ../include/openssl/err.h ../include/openssl/evp.h
-nseq.o: ../include/openssl/idea.h ../include/openssl/md2.h
-nseq.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
-nseq.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-nseq.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-nseq.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-nseq.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
-nseq.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
-nseq.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
-nseq.o: ../include/openssl/sha.h ../include/openssl/stack.h
-nseq.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h progs.h
-openssl.o: ../include/openssl/asn1.h ../include/openssl/bio.h
-openssl.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
-openssl.o: ../include/openssl/buffer.h ../include/openssl/cast.h
-openssl.o: ../include/openssl/conf.h ../include/openssl/crypto.h
-openssl.o: ../include/openssl/des.h ../include/openssl/dh.h
-openssl.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
-openssl.o: ../include/openssl/e_os2.h ../include/openssl/err.h
-openssl.o: ../include/openssl/evp.h ../include/openssl/idea.h
-openssl.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-openssl.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
-openssl.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-openssl.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-openssl.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-openssl.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
-openssl.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
-openssl.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
-openssl.o: ../include/openssl/sha.h ../include/openssl/ssl.h
-openssl.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
-openssl.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
-openssl.o: ../include/openssl/tls1.h ../include/openssl/x509.h
-openssl.o: ../include/openssl/x509_vfy.h apps.h progs.h s_apps.h
-pkcs12.o: ../include/openssl/asn1.h ../include/openssl/bio.h
-pkcs12.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
-pkcs12.o: ../include/openssl/buffer.h ../include/openssl/cast.h
-pkcs12.o: ../include/openssl/crypto.h ../include/openssl/des.h
-pkcs12.o: ../include/openssl/dh.h ../include/openssl/dsa.h
-pkcs12.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-pkcs12.o: ../include/openssl/err.h ../include/openssl/evp.h
-pkcs12.o: ../include/openssl/idea.h ../include/openssl/md2.h
-pkcs12.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
-pkcs12.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-pkcs12.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-pkcs12.o: ../include/openssl/pem2.h ../include/openssl/pkcs12.h
-pkcs12.o: ../include/openssl/pkcs7.h ../include/openssl/rc2.h
-pkcs12.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
-pkcs12.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
-pkcs12.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-pkcs12.o: ../include/openssl/stack.h ../include/openssl/x509.h
-pkcs12.o: ../include/openssl/x509_vfy.h apps.h progs.h
-pkcs7.o: ../include/openssl/asn1.h ../include/openssl/bio.h
-pkcs7.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
-pkcs7.o: ../include/openssl/buffer.h ../include/openssl/cast.h
-pkcs7.o: ../include/openssl/crypto.h ../include/openssl/des.h
-pkcs7.o: ../include/openssl/dh.h ../include/openssl/dsa.h
-pkcs7.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-pkcs7.o: ../include/openssl/err.h ../include/openssl/evp.h
-pkcs7.o: ../include/openssl/idea.h ../include/openssl/md2.h
-pkcs7.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
-pkcs7.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-pkcs7.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-pkcs7.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-pkcs7.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
-pkcs7.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
-pkcs7.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
-pkcs7.o: ../include/openssl/sha.h ../include/openssl/stack.h
-pkcs7.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h progs.h
-pkcs8.o: ../include/openssl/asn1.h ../include/openssl/bio.h
-pkcs8.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
-pkcs8.o: ../include/openssl/buffer.h ../include/openssl/cast.h
-pkcs8.o: ../include/openssl/crypto.h ../include/openssl/des.h
-pkcs8.o: ../include/openssl/dh.h ../include/openssl/dsa.h
-pkcs8.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-pkcs8.o: ../include/openssl/err.h ../include/openssl/evp.h
-pkcs8.o: ../include/openssl/idea.h ../include/openssl/md2.h
-pkcs8.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
-pkcs8.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-pkcs8.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-pkcs8.o: ../include/openssl/pem2.h ../include/openssl/pkcs12.h
-pkcs8.o: ../include/openssl/pkcs7.h ../include/openssl/rc2.h
-pkcs8.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
-pkcs8.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
-pkcs8.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-pkcs8.o: ../include/openssl/stack.h ../include/openssl/x509.h
-pkcs8.o: ../include/openssl/x509_vfy.h apps.h progs.h
-req.o: ../include/openssl/asn1.h ../include/openssl/bio.h
-req.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
-req.o: ../include/openssl/buffer.h ../include/openssl/cast.h
-req.o: ../include/openssl/conf.h ../include/openssl/crypto.h
-req.o: ../include/openssl/des.h ../include/openssl/dh.h
-req.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
-req.o: ../include/openssl/e_os2.h ../include/openssl/err.h
-req.o: ../include/openssl/evp.h ../include/openssl/idea.h
-req.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-req.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
-req.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-req.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-req.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-req.o: ../include/openssl/rand.h ../include/openssl/rc2.h
-req.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
-req.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
-req.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-req.o: ../include/openssl/stack.h ../include/openssl/x509.h
-req.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h progs.h
-rsa.o: ../include/openssl/asn1.h ../include/openssl/bio.h
-rsa.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
-rsa.o: ../include/openssl/buffer.h ../include/openssl/cast.h
-rsa.o: ../include/openssl/crypto.h ../include/openssl/des.h
-rsa.o: ../include/openssl/dh.h ../include/openssl/dsa.h
-rsa.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-rsa.o: ../include/openssl/err.h ../include/openssl/evp.h
-rsa.o: ../include/openssl/idea.h ../include/openssl/md2.h
-rsa.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
-rsa.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-rsa.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-rsa.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-rsa.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
-rsa.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
-rsa.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
-rsa.o: ../include/openssl/sha.h ../include/openssl/stack.h
-rsa.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h progs.h
-s_cb.o: ../include/openssl/asn1.h ../include/openssl/bio.h
-s_cb.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
-s_cb.o: ../include/openssl/buffer.h ../include/openssl/cast.h
-s_cb.o: ../include/openssl/crypto.h ../include/openssl/des.h
-s_cb.o: ../include/openssl/dh.h ../include/openssl/dsa.h
-s_cb.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-s_cb.o: ../include/openssl/err.h ../include/openssl/evp.h
-s_cb.o: ../include/openssl/idea.h ../include/openssl/lhash.h
-s_cb.o: ../include/openssl/md2.h ../include/openssl/md5.h
-s_cb.o: ../include/openssl/mdc2.h ../include/openssl/objects.h
-s_cb.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-s_cb.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-s_cb.o: ../include/openssl/pkcs7.h ../include/openssl/rc2.h
-s_cb.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
-s_cb.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
-s_cb.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-s_cb.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
-s_cb.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
-s_cb.o: ../include/openssl/stack.h ../include/openssl/tls1.h
-s_cb.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h progs.h
-s_cb.o: s_apps.h
-s_client.o: ../include/openssl/asn1.h ../include/openssl/bio.h
-s_client.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
-s_client.o: ../include/openssl/buffer.h ../include/openssl/cast.h
-s_client.o: ../include/openssl/crypto.h ../include/openssl/des.h
-s_client.o: ../include/openssl/dh.h ../include/openssl/dsa.h
-s_client.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-s_client.o: ../include/openssl/err.h ../include/openssl/evp.h
-s_client.o: ../include/openssl/idea.h ../include/openssl/lhash.h
-s_client.o: ../include/openssl/md2.h ../include/openssl/md5.h
-s_client.o: ../include/openssl/mdc2.h ../include/openssl/objects.h
-s_client.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-s_client.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-s_client.o: ../include/openssl/pkcs7.h ../include/openssl/rc2.h
-s_client.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
-s_client.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
-s_client.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-s_client.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
-s_client.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
-s_client.o: ../include/openssl/stack.h ../include/openssl/tls1.h
-s_client.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
-s_client.o: progs.h s_apps.h
-s_server.o: ../include/openssl/asn1.h ../include/openssl/bio.h
-s_server.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
-s_server.o: ../include/openssl/buffer.h ../include/openssl/cast.h
-s_server.o: ../include/openssl/crypto.h ../include/openssl/des.h
-s_server.o: ../include/openssl/dh.h ../include/openssl/dsa.h
-s_server.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-s_server.o: ../include/openssl/err.h ../include/openssl/evp.h
-s_server.o: ../include/openssl/idea.h ../include/openssl/lhash.h
-s_server.o: ../include/openssl/md2.h ../include/openssl/md5.h
-s_server.o: ../include/openssl/mdc2.h ../include/openssl/objects.h
-s_server.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-s_server.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-s_server.o: ../include/openssl/pkcs7.h ../include/openssl/rc2.h
-s_server.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
-s_server.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
-s_server.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-s_server.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
-s_server.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
-s_server.o: ../include/openssl/stack.h ../include/openssl/tls1.h
-s_server.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
-s_server.o: progs.h s_apps.h
-s_socket.o: ../include/openssl/asn1.h ../include/openssl/bio.h
-s_socket.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
-s_socket.o: ../include/openssl/buffer.h ../include/openssl/cast.h
-s_socket.o: ../include/openssl/crypto.h ../include/openssl/des.h
-s_socket.o: ../include/openssl/dh.h ../include/openssl/dsa.h
-s_socket.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-s_socket.o: ../include/openssl/evp.h ../include/openssl/idea.h
-s_socket.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-s_socket.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
-s_socket.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-s_socket.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-s_socket.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-s_socket.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
-s_socket.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
-s_socket.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
-s_socket.o: ../include/openssl/sha.h ../include/openssl/ssl.h
-s_socket.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
-s_socket.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
-s_socket.o: ../include/openssl/tls1.h ../include/openssl/x509.h
-s_socket.o: ../include/openssl/x509_vfy.h apps.h progs.h s_apps.h
-s_time.o: ../include/openssl/asn1.h ../include/openssl/bio.h
-s_time.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
-s_time.o: ../include/openssl/buffer.h ../include/openssl/cast.h
-s_time.o: ../include/openssl/crypto.h ../include/openssl/des.h
-s_time.o: ../include/openssl/dh.h ../include/openssl/dsa.h
-s_time.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-s_time.o: ../include/openssl/err.h ../include/openssl/evp.h
-s_time.o: ../include/openssl/idea.h ../include/openssl/lhash.h
-s_time.o: ../include/openssl/md2.h ../include/openssl/md5.h
-s_time.o: ../include/openssl/mdc2.h ../include/openssl/objects.h
-s_time.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-s_time.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-s_time.o: ../include/openssl/pkcs7.h ../include/openssl/rc2.h
-s_time.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
-s_time.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
-s_time.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-s_time.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
-s_time.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
-s_time.o: ../include/openssl/stack.h ../include/openssl/tls1.h
-s_time.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
-s_time.o: progs.h s_apps.h
-sess_id.o: ../include/openssl/asn1.h ../include/openssl/bio.h
-sess_id.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
-sess_id.o: ../include/openssl/buffer.h ../include/openssl/cast.h
-sess_id.o: ../include/openssl/crypto.h ../include/openssl/des.h
-sess_id.o: ../include/openssl/dh.h ../include/openssl/dsa.h
-sess_id.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-sess_id.o: ../include/openssl/err.h ../include/openssl/evp.h
-sess_id.o: ../include/openssl/idea.h ../include/openssl/lhash.h
-sess_id.o: ../include/openssl/md2.h ../include/openssl/md5.h
-sess_id.o: ../include/openssl/mdc2.h ../include/openssl/objects.h
-sess_id.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-sess_id.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-sess_id.o: ../include/openssl/pkcs7.h ../include/openssl/rc2.h
-sess_id.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
-sess_id.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
-sess_id.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-sess_id.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
-sess_id.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
-sess_id.o: ../include/openssl/stack.h ../include/openssl/tls1.h
-sess_id.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
-sess_id.o: progs.h
-speed.o: ../include/openssl/asn1.h ../include/openssl/bio.h
-speed.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
-speed.o: ../include/openssl/buffer.h ../include/openssl/cast.h
-speed.o: ../include/openssl/crypto.h ../include/openssl/des.h
-speed.o: ../include/openssl/dh.h ../include/openssl/dsa.h
-speed.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-speed.o: ../include/openssl/err.h ../include/openssl/evp.h
-speed.o: ../include/openssl/hmac.h ../include/openssl/idea.h
-speed.o: ../include/openssl/md2.h ../include/openssl/md5.h
-speed.o: ../include/openssl/mdc2.h ../include/openssl/objects.h
-speed.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-speed.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
-speed.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
-speed.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
-speed.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
-speed.o: ../include/openssl/sha.h ../include/openssl/stack.h
-speed.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h ./testdsa.h
-speed.o: ./testrsa.h apps.h progs.h
-verify.o: ../include/openssl/asn1.h ../include/openssl/bio.h
-verify.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
-verify.o: ../include/openssl/buffer.h ../include/openssl/cast.h
-verify.o: ../include/openssl/crypto.h ../include/openssl/des.h
-verify.o: ../include/openssl/dh.h ../include/openssl/dsa.h
-verify.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-verify.o: ../include/openssl/err.h ../include/openssl/evp.h
-verify.o: ../include/openssl/idea.h ../include/openssl/md2.h
-verify.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
-verify.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-verify.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-verify.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-verify.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
-verify.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
-verify.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
-verify.o: ../include/openssl/sha.h ../include/openssl/stack.h
-verify.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
-verify.o: progs.h
-version.o: ../include/openssl/asn1.h ../include/openssl/bio.h
-version.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
-version.o: ../include/openssl/buffer.h ../include/openssl/cast.h
-version.o: ../include/openssl/crypto.h ../include/openssl/des.h
-version.o: ../include/openssl/dh.h ../include/openssl/dsa.h
-version.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-version.o: ../include/openssl/evp.h ../include/openssl/idea.h
-version.o: ../include/openssl/md2.h ../include/openssl/md5.h
-version.o: ../include/openssl/mdc2.h ../include/openssl/objects.h
-version.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-version.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
-version.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
-version.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
-version.o: ../include/openssl/sha.h ../include/openssl/stack.h apps.h progs.h
-x509.o: ../include/openssl/asn1.h ../include/openssl/bio.h
-x509.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
-x509.o: ../include/openssl/buffer.h ../include/openssl/cast.h
-x509.o: ../include/openssl/conf.h ../include/openssl/crypto.h
-x509.o: ../include/openssl/des.h ../include/openssl/dh.h
-x509.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
-x509.o: ../include/openssl/e_os2.h ../include/openssl/err.h
-x509.o: ../include/openssl/evp.h ../include/openssl/idea.h
-x509.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-x509.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
-x509.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-x509.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-x509.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-x509.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
-x509.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
-x509.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
-x509.o: ../include/openssl/sha.h ../include/openssl/stack.h
-x509.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
-x509.o: ../include/openssl/x509v3.h apps.h progs.h

apps/app_rand.c

@@ -0,0 +1,218 @@
+/* apps/app_rand.c */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+/* ====================================================================
+ * Copyright (c) 1998-2000 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+
+#define NON_MAIN
+#include "apps.h"
+#undef NON_MAIN
+#include <openssl/bio.h>
+#include <openssl/rand.h>
+
+
+static int seeded = 0;
+static int egdsocket = 0;
+
+int app_RAND_load_file(const char *file, BIO *bio_e, int dont_warn)
+	{
+	int consider_randfile = (file == NULL);
+	char buffer[200];
+	
+#ifdef OPENSSL_SYS_WINDOWS
+	BIO_printf(bio_e,"Loading 'screen' into random state -");
+	BIO_flush(bio_e);
+	RAND_screen();
+	BIO_printf(bio_e," done\n");
+#endif
+
+	if (file == NULL)
+		file = RAND_file_name(buffer, sizeof buffer);
+	else if (RAND_egd(file) > 0)
+		{
+		/* we try if the given filename is an EGD socket.
+		   if it is, we don't write anything back to the file. */
+		egdsocket = 1;
+		return 1;
+		}
+	if (file == NULL || !RAND_load_file(file, -1))
+		{
+		if (RAND_status() == 0)
+			{
+			if (!dont_warn)
+				{
+				BIO_printf(bio_e,"unable to load 'random state'\n");
+				BIO_printf(bio_e,"This means that the random number generator has not been seeded\n");
+				BIO_printf(bio_e,"with much random data.\n");
+				if (consider_randfile) /* explanation does not apply when a file is explicitly named */
+					{
+					BIO_printf(bio_e,"Consider setting the RANDFILE environment variable to point at a file that\n");
+					BIO_printf(bio_e,"'random' data can be kept in (the file will be overwritten).\n");
+					}
+				}
+			return 0;
+			}
+		}
+	seeded = 1;
+	return 1;
+	}
+
+long app_RAND_load_files(char *name)
+	{
+	char *p,*n;
+	int last;
+	long tot=0;
+	int egd;
+	
+	for (;;)
+		{
+		last=0;
+		for (p=name; ((*p != '\0') && (*p != LIST_SEPARATOR_CHAR)); p++);
+		if (*p == '\0') last=1;
+		*p='\0';
+		n=name;
+		name=p+1;
+		if (*n == '\0') break;
+
+		egd=RAND_egd(n);
+		if (egd > 0)
+			tot+=egd;
+		else
+			tot+=RAND_load_file(n,-1);
+		if (last) break;
+		}
+	if (tot > 512)
+		app_RAND_allow_write_file();
+	return(tot);
+	}
+
+int app_RAND_write_file(const char *file, BIO *bio_e)
+	{
+	char buffer[200];
+	
+	if (egdsocket || !seeded)
+		/* If we did not manage to read the seed file,
+		 * we should not write a low-entropy seed file back --
+		 * it would suppress a crucial warning the next time
+		 * we want to use it. */
+		return 0;
+
+	if (file == NULL)
+		file = RAND_file_name(buffer, sizeof buffer);
+	if (file == NULL || !RAND_write_file(file))
+		{
+		BIO_printf(bio_e,"unable to write 'random state'\n");
+		return 0;
+		}
+	return 1;
+	}
+
+void app_RAND_allow_write_file(void)
+	{
+	seeded = 1;
+	}

apps/apps.h

@@ -55,47 +55,112 @@
  * copied and put under another distribution licence
  * [including the GNU Public Licence.]
  */
+/* ====================================================================
+ * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
 
 #ifndef HEADER_APPS_H
 #define HEADER_APPS_H
 
-#include "openssl/e_os.h"
+#include "e_os.h"
 
-#include <openssl/buffer.h>
 #include <openssl/bio.h>
-#include <openssl/crypto.h>
-#include "progs.h"
-
-#ifdef NO_STDIO
-BIO_METHOD *BIO_s_file();
+#include <openssl/x509.h>
+#include <openssl/lhash.h>
+#include <openssl/conf.h>
+#include <openssl/txt_db.h>
+#ifndef OPENSSL_NO_ENGINE
+#include <openssl/engine.h>
 #endif
-
-#ifdef WIN32
-#define rename(from,to) WIN32_rename((from),(to))
-int WIN32_rename(char *oldname,char *newname);
+#ifndef OPENSSL_NO_OCSP
+#include <openssl/ocsp.h>
 #endif
+#include <openssl/ossl_typ.h>
+
+int app_RAND_load_file(const char *file, BIO *bio_e, int dont_warn);
+int app_RAND_write_file(const char *file, BIO *bio_e);
+/* When `file' is NULL, use defaults.
+ * `bio_e' is for error messages. */
+void app_RAND_allow_write_file(void);
+long app_RAND_load_files(char *file); /* `file' is a list of files to read,
+                                       * separated by LIST_SEPARATOR_CHAR
+                                       * (see e_os.h).  The string is
+                                       * destroyed! */
 
 #ifndef MONOLITH
 
 #define MAIN(a,v)	main(a,v)
 
 #ifndef NON_MAIN
+CONF *config=NULL;
 BIO *bio_err=NULL;
 #else
+extern CONF *config;
 extern BIO *bio_err;
 #endif
 
 #else
 
 #define MAIN(a,v)	PROG(a,v)
-#include <openssl/conf.h>
-extern LHASH *config;
+extern CONF *config;
 extern char *default_config_file;
 extern BIO *bio_err;
 
 #endif
 
+#ifndef OPENSSL_SYS_NETWARE
 #include <signal.h>
+#endif
 
 #ifdef SIGPIPE
 #define do_pipe_sig()	signal(SIGPIPE,SIG_IGN)
@@ -103,39 +168,193 @@ extern BIO *bio_err;
 #define do_pipe_sig()
 #endif
 
-#if defined(MONOLITH) && !defined(SSLEAY)
-#  define apps_startup()	do_pipe_sig()
+#ifdef OPENSSL_NO_COMP
+#define zlib_cleanup() 
 #else
-#  if defined(MSDOS) || defined(WIN16) || defined(WIN32)
-#    ifdef _O_BINARY
-#      define apps_startup() \
-		_fmode=_O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
-		SSLeay_add_all_algorithms()
-#    else
-#      define apps_startup() \
-		_fmode=O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
-		SSLeay_add_all_algorithms()
-#    endif
+#define zlib_cleanup() COMP_zlib_cleanup()
+#endif
+
+#if defined(MONOLITH) && !defined(OPENSSL_C)
+#  define apps_startup() \
+		do_pipe_sig()
+#  define apps_shutdown()
+#else
+#  ifndef OPENSSL_NO_ENGINE
+#    define apps_startup() \
+			do { do_pipe_sig(); CRYPTO_malloc_init(); \
+			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
+			ENGINE_load_builtin_engines(); setup_ui_method(); } while(0)
+#    define apps_shutdown() \
+			do { CONF_modules_unload(1); destroy_ui_method(); \
+			OBJ_cleanup(); EVP_cleanup(); ENGINE_cleanup(); \
+			CRYPTO_cleanup_all_ex_data(); ERR_remove_thread_state(NULL); \
+			ERR_free_strings(); zlib_cleanup();} while(0)
 #  else
-#    define apps_startup()	do_pipe_sig(); SSLeay_add_all_algorithms();
+#    define apps_startup() \
+			do { do_pipe_sig(); CRYPTO_malloc_init(); \
+			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
+			setup_ui_method(); } while(0)
+#    define apps_shutdown() \
+			do { CONF_modules_unload(1); destroy_ui_method(); \
+			OBJ_cleanup(); EVP_cleanup(); \
+			CRYPTO_cleanup_all_ex_data(); ERR_remove_thread_state(NULL); \
+			ERR_free_strings(); zlib_cleanup(); } while(0)
 #  endif
 #endif
 
+#ifdef OPENSSL_SYSNAME_WIN32
+#  define openssl_fdset(a,b) FD_SET((unsigned int)a, b)
+#else
+#  define openssl_fdset(a,b) FD_SET(a, b)
+#endif
+
+
 typedef struct args_st
 	{
 	char **data;
 	int count;
 	} ARGS;
 
+#define PW_MIN_LENGTH 4
+typedef struct pw_cb_data
+	{
+	const void *password;
+	const char *prompt_info;
+	} PW_CB_DATA;
+
+int password_callback(char *buf, int bufsiz, int verify,
+	PW_CB_DATA *cb_data);
+
+int setup_ui_method(void);
+void destroy_ui_method(void);
+
 int should_retry(int i);
 int args_from_file(char *file, int *argc, char **argv[]);
 int str2fmt(char *s);
 void program_name(char *in,char *out,int size);
 int chopup_args(ARGS *arg,char *buf, int *argc, char **argv[]);
+#ifdef HEADER_X509_H
+int dump_cert_text(BIO *out, X509 *x);
+void print_name(BIO *out, const char *title, X509_NAME *nm, unsigned long lflags);
+#endif
+int set_cert_ex(unsigned long *flags, const char *arg);
+int set_name_ex(unsigned long *flags, const char *arg);
+int set_ext_copy(int *copy_type, const char *arg);
+int copy_extensions(X509 *x, X509_REQ *req, int copy_type);
+int app_passwd(BIO *err, char *arg1, char *arg2, char **pass1, char **pass2);
+int add_oid_section(BIO *err, CONF *conf);
+X509 *load_cert(BIO *err, const char *file, int format,
+	const char *pass, ENGINE *e, const char *cert_descrip);
+EVP_PKEY *load_key(BIO *err, const char *file, int format, int maybe_stdin,
+	const char *pass, ENGINE *e, const char *key_descrip);
+EVP_PKEY *load_pubkey(BIO *err, const char *file, int format, int maybe_stdin,
+	const char *pass, ENGINE *e, const char *key_descrip);
+STACK_OF(X509) *load_certs(BIO *err, const char *file, int format,
+	const char *pass, ENGINE *e, const char *cert_descrip);
+STACK_OF(X509_CRL) *load_crls(BIO *err, const char *file, int format,
+	const char *pass, ENGINE *e, const char *cert_descrip);
+X509_STORE *setup_verify(BIO *bp, char *CAfile, char *CApath);
+#ifndef OPENSSL_NO_ENGINE
+ENGINE *setup_engine(BIO *err, const char *engine, int debug);
+#endif
+
+#ifndef OPENSSL_NO_OCSP
+OCSP_RESPONSE *process_responder(BIO *err, OCSP_REQUEST *req,
+			char *host, char *path, char *port, int use_ssl,
+			STACK_OF(CONF_VALUE) *headers,
+			int req_timeout);
+#endif
+
+int load_config(BIO *err, CONF *cnf);
+char *make_config_name(void);
+
+/* Functions defined in ca.c and also used in ocsp.c */
+int unpack_revinfo(ASN1_TIME **prevtm, int *preason, ASN1_OBJECT **phold,
+			ASN1_GENERALIZEDTIME **pinvtm, const char *str);
+
+#define DB_type         0
+#define DB_exp_date     1
+#define DB_rev_date     2
+#define DB_serial       3       /* index - unique */
+#define DB_file         4       
+#define DB_name         5       /* index - unique when active and not disabled */
+#define DB_NUMBER       6
+
+#define DB_TYPE_REV	'R'
+#define DB_TYPE_EXP	'E'
+#define DB_TYPE_VAL	'V'
+
+typedef struct db_attr_st
+	{
+	int unique_subject;
+	} DB_ATTR;
+typedef struct ca_db_st
+	{
+	DB_ATTR attributes;
+	TXT_DB *db;
+	} CA_DB;
+
+BIGNUM *load_serial(char *serialfile, int create, ASN1_INTEGER **retai);
+int save_serial(char *serialfile, char *suffix, BIGNUM *serial, ASN1_INTEGER **retai);
+int rotate_serial(char *serialfile, char *new_suffix, char *old_suffix);
+int rand_serial(BIGNUM *b, ASN1_INTEGER *ai);
+CA_DB *load_index(char *dbfile, DB_ATTR *dbattr);
+int index_index(CA_DB *db);
+int save_index(const char *dbfile, const char *suffix, CA_DB *db);
+int rotate_index(const char *dbfile, const char *new_suffix, const char *old_suffix);
+void free_index(CA_DB *db);
+#define index_name_cmp_noconst(a, b) \
+	index_name_cmp((const OPENSSL_CSTRING *)CHECKED_PTR_OF(OPENSSL_STRING, a), \
+	(const OPENSSL_CSTRING *)CHECKED_PTR_OF(OPENSSL_STRING, b))
+int index_name_cmp(const OPENSSL_CSTRING *a, const OPENSSL_CSTRING *b);
+int parse_yesno(const char *str, int def);
+
+X509_NAME *parse_name(char *str, long chtype, int multirdn);
+int args_verify(char ***pargs, int *pargc,
+			int *badarg, BIO *err, X509_VERIFY_PARAM **pm);
+void policies_print(BIO *out, X509_STORE_CTX *ctx);
+int bio_to_mem(unsigned char **out, int maxlen, BIO *in);
+int pkey_ctrl_string(EVP_PKEY_CTX *ctx, char *value);
+int init_gen_str(BIO *err, EVP_PKEY_CTX **pctx,
+			const char *algname, ENGINE *e, int do_param);
+#ifndef OPENSSL_NO_PSK
+extern char *psk_key;
+#endif
+#ifndef OPENSSL_NO_JPAKE
+void jpake_client_auth(BIO *out, BIO *conn, const char *secret);
+void jpake_server_auth(BIO *out, BIO *conn, const char *secret);
+#endif
+
 #define FORMAT_UNDEF    0
 #define FORMAT_ASN1     1
 #define FORMAT_TEXT     2
 #define FORMAT_PEM      3
 #define FORMAT_NETSCAPE 4
+#define FORMAT_PKCS12   5
+#define FORMAT_SMIME    6
+#define FORMAT_ENGINE   7
+#define FORMAT_IISSGC	8	/* XXX this stupid macro helps us to avoid
+				 * adding yet another param to load_*key() */
+#define FORMAT_PEMRSA	9	/* PEM RSAPubicKey format */
+#define FORMAT_ASN1RSA	10	/* DER RSAPubicKey format */
+#define FORMAT_MSBLOB	11	/* MS Key blob format */
+#define FORMAT_PVK	12	/* MS PVK file format */
 
+#define EXT_COPY_NONE	0
+#define EXT_COPY_ADD	1
+#define EXT_COPY_ALL	2
+
+#define NETSCAPE_CERT_HDR	"certificate"
+
+#define APP_PASS_LEN	1024
+
+#define SERIAL_RAND_BITS	64
+
+int app_isdir(const char *);
+int raw_read_stdin(void *,int);
+int raw_write_stdout(const void *,int);
+
+#define TM_START	0
+#define TM_STOP		1
+double app_tminterval (int stop,int usertime);
 #endif

apps/asn1pars.c

@@ -56,7 +56,7 @@
  * [including the GNU Public Licence.]
  */
 
-/* A nice addition from Dr Stephen Henson <shenson@bigfoot.com> to 
+/* A nice addition from Dr Stephen Henson <steve@openssl.org> to 
  * add the -strparse option which parses nested binary structures
  */
 
@@ -74,23 +74,29 @@
  * -i		- indent the details by depth
  * -offset	- where in the file to start
  * -length	- how many bytes to use
- * -oid file	- extra oid decription file
+ * -oid file	- extra oid description file
  */
 
 #undef PROG
 #define PROG	asn1parse_main
 
+int MAIN(int, char **);
+
+static int do_generate(BIO *bio, char *genstr, char *genconf, BUF_MEM *buf);
+
 int MAIN(int argc, char **argv)
 	{
 	int i,badops=0,offset=0,ret=1,j;
 	unsigned int length=0;
 	long num,tmplen;
 	BIO *in=NULL,*out=NULL,*b64=NULL, *derout = NULL;
-	int informat,indent=0;
+	int informat,indent=0, noout = 0, dump = 0;
 	char *infile=NULL,*str=NULL,*prog,*oidfile=NULL, *derfile=NULL;
+	char *genstr=NULL, *genconf=NULL;
 	unsigned char *tmpbuf;
+	const unsigned char *ctmpbuf;
 	BUF_MEM *buf=NULL;
-	STACK *osk=NULL;
+	STACK_OF(OPENSSL_STRING) *osk=NULL;
 	ASN1_TYPE *at=NULL;
 
 	informat=FORMAT_PEM;
@@ -101,12 +107,15 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
+	if (!load_config(bio_err, NULL))
+		goto end;
+
 	prog=argv[0];
 	argc--;
 	argv++;
-	if ((osk=sk_new_null()) == NULL)
+	if ((osk=sk_OPENSSL_STRING_new_null()) == NULL)
 		{
-		BIO_printf(bio_err,"Malloc failure\n");
+		BIO_printf(bio_err,"Memory allocation failure\n");
 		goto end;
 		}
 	while (argc >= 1)
@@ -130,6 +139,7 @@ int MAIN(int argc, char **argv)
 			{
 			indent=1;
 			}
+		else if (strcmp(*argv,"-noout") == 0) noout = 1;
 		else if (strcmp(*argv,"-oid") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -146,10 +156,30 @@ int MAIN(int argc, char **argv)
 			length= atoi(*(++argv));
 			if (length == 0) goto bad;
 			}
+		else if (strcmp(*argv,"-dump") == 0)
+			{
+			dump= -1;
+			}
+		else if (strcmp(*argv,"-dlimit") == 0)
+			{
+			if (--argc < 1) goto bad;
+			dump= atoi(*(++argv));
+			if (dump <= 0) goto bad;
+			}
 		else if (strcmp(*argv,"-strparse") == 0)
 			{
 			if (--argc < 1) goto bad;
-			sk_push(osk,*(++argv));
+			sk_OPENSSL_STRING_push(osk,*(++argv));
+			}
+		else if (strcmp(*argv,"-genstr") == 0)
+			{
+			if (--argc < 1) goto bad;
+			genstr= *(++argv);
+			}
+		else if (strcmp(*argv,"-genconf") == 0)
+			{
+			if (--argc < 1) goto bad;
+			genconf= *(++argv);
 			}
 		else
 			{
@@ -166,16 +196,21 @@ int MAIN(int argc, char **argv)
 bad:
 		BIO_printf(bio_err,"%s [options] <infile\n",prog);
 		BIO_printf(bio_err,"where options are\n");
-		BIO_printf(bio_err," -inform arg   input format - one of DER TXT PEM\n");
+		BIO_printf(bio_err," -inform arg   input format - one of DER PEM\n");
 		BIO_printf(bio_err," -in arg       input file\n");
+		BIO_printf(bio_err," -out arg      output file (output format is always DER\n");
+		BIO_printf(bio_err," -noout arg    don't produce any output\n");
 		BIO_printf(bio_err," -offset arg   offset into file\n");
-		BIO_printf(bio_err," -length arg   lenth of section in file\n");
+		BIO_printf(bio_err," -length arg   length of section in file\n");
 		BIO_printf(bio_err," -i            indent entries\n");
+		BIO_printf(bio_err," -dump         dump unknown data in hex form\n");
+		BIO_printf(bio_err," -dlimit arg   dump the first arg bytes of unknown data in hex form\n");
 		BIO_printf(bio_err," -oid file     file of extra oid definitions\n");
 		BIO_printf(bio_err," -strparse offset\n");
 		BIO_printf(bio_err,"               a series of these can be used to 'dig' into multiple\n");
 		BIO_printf(bio_err,"               ASN1 blob wrappings\n");
-		BIO_printf(bio_err," -out filename output DER encoding to file\n");
+		BIO_printf(bio_err," -genstr str   string to generate ASN1 structure from\n");
+		BIO_printf(bio_err," -genconf file file to generate ASN1 structure from\n");
 		goto end;
 		}
 
@@ -189,6 +224,12 @@ bad:
 		goto end;
 		}
 	BIO_set_fp(out,stdout,BIO_NOCLOSE|BIO_FP_TEXT);
+#ifdef OPENSSL_SYS_VMS
+	{
+	BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+	out = BIO_push(tmpbio, out);
+	}
+#endif
 
 	if (oidfile != NULL)
 		{
@@ -223,47 +264,63 @@ bad:
 	if ((buf=BUF_MEM_new()) == NULL) goto end;
 	if (!BUF_MEM_grow(buf,BUFSIZ*8)) goto end; /* Pre-allocate :-) */
 
-	if (informat == FORMAT_PEM)
+	if (genstr || genconf)
 		{
-		BIO *tmp;
-
-		if ((b64=BIO_new(BIO_f_base64())) == NULL)
+		num = do_generate(bio_err, genstr, genconf, buf);
+		if (num < 0)
+			{
+			ERR_print_errors(bio_err);
 			goto end;
-		BIO_push(b64,in);
-		tmp=in;
-		in=b64;
-		b64=tmp;
+			}
 		}
 
-	num=0;
-	for (;;)
+	else
 		{
-		if (!BUF_MEM_grow(buf,(int)num+BUFSIZ)) goto end;
-		i=BIO_read(in,&(buf->data[num]),BUFSIZ);
-		if (i <= 0) break;
-		num+=i;
+
+		if (informat == FORMAT_PEM)
+			{
+			BIO *tmp;
+
+			if ((b64=BIO_new(BIO_f_base64())) == NULL)
+				goto end;
+			BIO_push(b64,in);
+			tmp=in;
+			in=b64;
+			b64=tmp;
+			}
+
+		num=0;
+		for (;;)
+			{
+			if (!BUF_MEM_grow(buf,(int)num+BUFSIZ)) goto end;
+			i=BIO_read(in,&(buf->data[num]),BUFSIZ);
+			if (i <= 0) break;
+			num+=i;
+			}
 		}
 	str=buf->data;
 
 	/* If any structs to parse go through in sequence */
 
-	if (sk_num(osk))
+	if (sk_OPENSSL_STRING_num(osk))
 		{
 		tmpbuf=(unsigned char *)str;
 		tmplen=num;
-		for (i=0; i<sk_num(osk); i++)
+		for (i=0; i<sk_OPENSSL_STRING_num(osk); i++)
 			{
 			ASN1_TYPE *atmp;
-			j=atoi(sk_value(osk,i));
+			int typ;
+			j=atoi(sk_OPENSSL_STRING_value(osk,i));
 			if (j == 0)
 				{
-				BIO_printf(bio_err,"'%s' is an invalid number\n",sk_value(osk,i));
+				BIO_printf(bio_err,"'%s' is an invalid number\n",sk_OPENSSL_STRING_value(osk,i));
 				continue;
 				}
 			tmpbuf+=j;
 			tmplen-=j;
 			atmp = at;
-			at = d2i_ASN1_TYPE(NULL,&tmpbuf,tmplen);
+			ctmpbuf = tmpbuf;
+			at = d2i_ASN1_TYPE(NULL,&ctmpbuf,tmplen);
 			ASN1_TYPE_free(atmp);
 			if(!at)
 				{
@@ -271,6 +328,15 @@ bad:
 				ERR_print_errors(bio_err);
 				goto end;
 				}
+			typ = ASN1_TYPE_get(at);
+			if ((typ == V_ASN1_OBJECT)
+				|| (typ == V_ASN1_NULL))
+				{
+				BIO_printf(bio_err, "Can't parse %s type\n",
+					typ == V_ASN1_NULL ? "NULL" : "OBJECT");
+				ERR_print_errors(bio_err);
+				goto end;
+				}
 			/* hmm... this is a little evil but it works */
 			tmpbuf=at->value.asn1_string->data;
 			tmplen=at->value.asn1_string->length;
@@ -279,7 +345,15 @@ bad:
 		num=tmplen;
 		}
 
-	if (length == 0) length=(unsigned int)num;
+	if (offset >= num)
+		{
+		BIO_printf(bio_err, "Error: offset too large\n");
+		goto end;
+		}
+
+	num -= offset;
+
+	if ((length == 0) || ((long)length > num)) length=(unsigned int)num;
 	if(derout) {
 		if(BIO_write(derout, str + offset, length) != (int)length) {
 			BIO_printf(bio_err, "Error writing output\n");
@@ -287,7 +361,9 @@ bad:
 			goto end;
 		}
 	}
-	if (!ASN1_parse(out,(unsigned char *)&(str[offset]),length,indent))
+	if (!noout &&
+	    !ASN1_parse_dump(out,(unsigned char *)&(str[offset]),length,
+		    indent,dump))
 		{
 		ERR_print_errors(bio_err);
 		goto end;
@@ -296,14 +372,74 @@ bad:
 end:
 	BIO_free(derout);
 	if (in != NULL) BIO_free(in);
-	if (out != NULL) BIO_free(out);
+	if (out != NULL) BIO_free_all(out);
 	if (b64 != NULL) BIO_free(b64);
 	if (ret != 0)
 		ERR_print_errors(bio_err);
 	if (buf != NULL) BUF_MEM_free(buf);
 	if (at != NULL) ASN1_TYPE_free(at);
-	if (osk != NULL) sk_free(osk);
+	if (osk != NULL) sk_OPENSSL_STRING_free(osk);
 	OBJ_cleanup();
-	EXIT(ret);
+	apps_shutdown();
+	OPENSSL_EXIT(ret);
 	}
 
+static int do_generate(BIO *bio, char *genstr, char *genconf, BUF_MEM *buf)
+	{
+	CONF *cnf = NULL;
+	int len;
+	long errline;
+	unsigned char *p;
+	ASN1_TYPE *atyp = NULL;
+
+	if (genconf)
+		{
+		cnf = NCONF_new(NULL);
+		if (!NCONF_load(cnf, genconf, &errline))
+			goto conferr;
+		if (!genstr)
+			genstr = NCONF_get_string(cnf, "default", "asn1");
+		if (!genstr)
+			{
+			BIO_printf(bio, "Can't find 'asn1' in '%s'\n", genconf);
+			goto err;
+			}
+		}
+
+	atyp = ASN1_generate_nconf(genstr, cnf);
+	NCONF_free(cnf);
+	cnf = NULL;
+
+	if (!atyp)
+		return -1;
+
+	len = i2d_ASN1_TYPE(atyp, NULL);
+
+	if (len <= 0)
+		goto err;
+
+	if (!BUF_MEM_grow(buf,len))
+		goto err;
+
+	p=(unsigned char *)buf->data;
+
+	i2d_ASN1_TYPE(atyp, &p);
+
+	ASN1_TYPE_free(atyp);
+	return len;
+
+	conferr:
+
+	if (errline > 0)
+		BIO_printf(bio, "Error on line %ld of config file '%s'\n",
+							errline, genconf);
+	else
+		BIO_printf(bio, "Error loading config file '%s'\n", genconf);
+
+	err:
+	NCONF_free(cnf);
+	ASN1_TYPE_free(atyp);
+
+	return -1;
+
+	}

apps/ca-cert.srl

@@ -1 +1 @@
-05
+07

apps/ciphers.c

@@ -59,48 +59,48 @@
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
-#ifdef NO_STDIO
+#ifdef OPENSSL_NO_STDIO
 #define APPS_WIN16
 #endif
 #include "apps.h"
 #include <openssl/err.h>
 #include <openssl/ssl.h>
 
-#if defined(NO_RSA) && !defined(NO_SSL2)
-#define NO_SSL2
-#endif
-
 #undef PROG
 #define PROG	ciphers_main
 
-static char *ciphers_usage[]={
+static const char *ciphers_usage[]={
 "usage: ciphers args\n",
-" -v          - verbose mode, a textual listing of the ciphers in SSLeay\n",
+" -v          - verbose mode, a textual listing of the SSL/TLS ciphers in OpenSSL\n",
+" -V          - even more verbose\n",
 " -ssl2       - SSL2 mode\n",
 " -ssl3       - SSL3 mode\n",
+" -tls1       - TLS1 mode\n",
 NULL
 };
 
+int MAIN(int, char **);
+
 int MAIN(int argc, char **argv)
 	{
 	int ret=1,i;
-	int verbose=0;
-	char **pp;
+	int verbose=0,Verbose=0;
+	const char **pp;
 	const char *p;
 	int badops=0;
 	SSL_CTX *ctx=NULL;
 	SSL *ssl=NULL;
 	char *ciphers=NULL;
-	SSL_METHOD *meth=NULL;
+	const SSL_METHOD *meth=NULL;
 	STACK_OF(SSL_CIPHER) *sk;
 	char buf[512];
 	BIO *STDout=NULL;
 
-#if !defined(NO_SSL2) && !defined(NO_SSL3)
+#if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
 	meth=SSLv23_server_method();
-#elif !defined(NO_SSL3)
+#elif !defined(OPENSSL_NO_SSL3)
 	meth=SSLv3_server_method();
-#elif !defined(NO_SSL2)
+#elif !defined(OPENSSL_NO_SSL2)
 	meth=SSLv2_server_method();
 #endif
 
@@ -109,6 +109,14 @@ int MAIN(int argc, char **argv)
 	if (bio_err == NULL)
 		bio_err=BIO_new_fp(stderr,BIO_NOCLOSE);
 	STDout=BIO_new_fp(stdout,BIO_NOCLOSE);
+#ifdef OPENSSL_SYS_VMS
+	{
+	BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+	STDout = BIO_push(tmpbio, STDout);
+	}
+#endif
+	if (!load_config(bio_err, NULL))
+		goto end;
 
 	argc--;
 	argv++;
@@ -116,13 +124,19 @@ int MAIN(int argc, char **argv)
 		{
 		if (strcmp(*argv,"-v") == 0)
 			verbose=1;
-#ifndef NO_SSL2
+		else if (strcmp(*argv,"-V") == 0)
+			verbose=Verbose=1;
+#ifndef OPENSSL_NO_SSL2
 		else if (strcmp(*argv,"-ssl2") == 0)
 			meth=SSLv2_client_method();
 #endif
-#ifndef NO_SSL3
+#ifndef OPENSSL_NO_SSL3
 		else if (strcmp(*argv,"-ssl3") == 0)
 			meth=SSLv3_client_method();
+#endif
+#ifndef OPENSSL_NO_TLS1
+		else if (strcmp(*argv,"-tls1") == 0)
+			meth=TLSv1_client_method();
 #endif
 		else if ((strncmp(*argv,"-h",2) == 0) ||
 			 (strcmp(*argv,"-?") == 0))
@@ -141,16 +155,20 @@ int MAIN(int argc, char **argv)
 	if (badops)
 		{
 		for (pp=ciphers_usage; (*pp != NULL); pp++)
-			BIO_printf(bio_err,*pp);
+			BIO_printf(bio_err,"%s",*pp);
 		goto end;
 		}
 
-	SSLeay_add_ssl_algorithms();
+	OpenSSL_add_ssl_algorithms();
 
 	ctx=SSL_CTX_new(meth);
 	if (ctx == NULL) goto err;
-	if (ciphers != NULL)
-		SSL_CTX_set_cipher_list(ctx,ciphers);
+	if (ciphers != NULL) {
+		if(!SSL_CTX_set_cipher_list(ctx,ciphers)) {
+			BIO_printf(bio_err, "Error in cipher list\n");
+			goto err;
+		}
+	}
 	ssl=SSL_new(ctx);
 	if (ssl == NULL) goto err;
 
@@ -166,15 +184,33 @@ int MAIN(int argc, char **argv)
 			}
 		BIO_printf(STDout,"\n");
 		}
-	else
+	else /* verbose */
 		{
 		sk=SSL_get_ciphers(ssl);
 
 		for (i=0; i<sk_SSL_CIPHER_num(sk); i++)
 			{
-			BIO_puts(STDout,SSL_CIPHER_description(
-				sk_SSL_CIPHER_value(sk,i),
-				buf,512));
+			SSL_CIPHER *c;
+
+			c = sk_SSL_CIPHER_value(sk,i);
+			
+			if (Verbose)
+				{
+				unsigned long id = c->id;
+				int id0 = (int)(id >> 24);
+				int id1 = (int)((id >> 16) & 0xffL);
+				int id2 = (int)((id >> 8) & 0xffL);
+				int id3 = (int)(id & 0xffL);
+				
+				if ((id & 0xff000000L) == 0x02000000L)
+					BIO_printf(STDout, "     0x%02X,0x%02X,0x%02X - ", id1, id2, id3); /* SSL2 cipher */
+				else if ((id & 0xff000000L) == 0x03000000L)
+					BIO_printf(STDout, "          0x%02X,0x%02X - ", id2, id3); /* SSL3 cipher */
+				else
+					BIO_printf(STDout, "0x%02X,0x%02X,0x%02X,0x%02X - ", id0, id1, id2, id3); /* whatever */
+				}
+
+			BIO_puts(STDout,SSL_CIPHER_description(c,buf,sizeof buf));
 			}
 		}
 
@@ -188,7 +224,8 @@ err:
 end:
 	if (ctx != NULL) SSL_CTX_free(ctx);
 	if (ssl != NULL) SSL_free(ssl);
-	if (STDout != NULL) BIO_free(STDout);
-	EXIT(ret);
+	if (STDout != NULL) BIO_free_all(STDout);
+	apps_shutdown();
+	OPENSSL_EXIT(ret);
 	}
 

apps/crl.c

@@ -72,34 +72,51 @@
 #undef POSTFIX
 #define	POSTFIX	".rvk"
 
-static char *crl_usage[]={
+static const char *crl_usage[]={
 "usage: crl args\n",
 "\n",
-" -inform arg     - input format - default PEM (one of DER, TXT or PEM)\n",
+" -inform arg     - input format - default PEM (DER or PEM)\n",
 " -outform arg    - output format - default PEM\n",
 " -text           - print out a text format version\n",
 " -in arg         - input file - default stdin\n",
 " -out arg        - output file - default stdout\n",
 " -hash           - print hash value\n",
+" -fingerprint    - print the crl fingerprint\n",
 " -issuer         - print issuer DN\n",
 " -lastupdate     - lastUpdate field\n",
 " -nextupdate     - nextUpdate field\n",
+" -crlnumber      - print CRL number\n",
 " -noout          - no CRL output\n",
+" -CAfile  name   - verify CRL using certificates in file \"name\"\n",
+" -CApath  dir    - verify CRL using certificates in \"dir\"\n",
+" -nameopt arg    - various certificate name options\n",
 NULL
 };
 
 static X509_CRL *load_crl(char *file, int format);
 static BIO *bio_out=NULL;
 
+int MAIN(int, char **);
+
 int MAIN(int argc, char **argv)
 	{
+	unsigned long nmflag = 0;
 	X509_CRL *x=NULL;
+	char *CAfile = NULL, *CApath = NULL;
 	int ret=1,i,num,badops=0;
 	BIO *out=NULL;
 	int informat,outformat;
 	char *infile=NULL,*outfile=NULL;
 	int hash=0,issuer=0,lastupdate=0,nextupdate=0,noout=0,text=0;
-	char **pp,buf[256];
+	int fingerprint = 0, crlnumber = 0;
+	const char **pp;
+	X509_STORE *store = NULL;
+	X509_STORE_CTX ctx;
+	X509_LOOKUP *lookup = NULL;
+	X509_OBJECT xobj;
+	EVP_PKEY *pkey;
+	int do_ver = 0;
+	const EVP_MD *md_alg,*digest=EVP_sha1();
 
 	apps_startup();
 
@@ -107,9 +124,20 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
+	if (!load_config(bio_err, NULL))
+		goto end;
+
 	if (bio_out == NULL)
 		if ((bio_out=BIO_new(BIO_s_file())) != NULL)
+			{
 			BIO_set_fp(bio_out,stdout,BIO_NOCLOSE);
+#ifdef OPENSSL_SYS_VMS
+			{
+			BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+			bio_out = BIO_push(tmpbio, bio_out);
+			}
+#endif
+			}
 
 	informat=FORMAT_PEM;
 	outformat=FORMAT_PEM;
@@ -146,10 +174,29 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outfile= *(++argv);
 			}
+		else if (strcmp(*argv,"-CApath") == 0)
+			{
+			if (--argc < 1) goto bad;
+			CApath = *(++argv);
+			do_ver = 1;
+			}
+		else if (strcmp(*argv,"-CAfile") == 0)
+			{
+			if (--argc < 1) goto bad;
+			CAfile = *(++argv);
+			do_ver = 1;
+			}
+		else if (strcmp(*argv,"-verify") == 0)
+			do_ver = 1;
 		else if (strcmp(*argv,"-text") == 0)
 			text = 1;
 		else if (strcmp(*argv,"-hash") == 0)
 			hash= ++num;
+		else if (strcmp(*argv,"-nameopt") == 0)
+			{
+			if (--argc < 1) goto bad;
+			if (!set_name_ex(&nmflag, *(++argv))) goto bad;
+			}
 		else if (strcmp(*argv,"-issuer") == 0)
 			issuer= ++num;
 		else if (strcmp(*argv,"-lastupdate") == 0)
@@ -158,6 +205,15 @@ int MAIN(int argc, char **argv)
 			nextupdate= ++num;
 		else if (strcmp(*argv,"-noout") == 0)
 			noout= ++num;
+		else if (strcmp(*argv,"-fingerprint") == 0)
+			fingerprint= ++num;
+		else if (strcmp(*argv,"-crlnumber") == 0)
+			crlnumber= ++num;
+		else if ((md_alg=EVP_get_digestbyname(*argv + 1)))
+			{
+			/* ok */
+			digest=md_alg;
+			}
 		else
 			{
 			BIO_printf(bio_err,"unknown option %s\n",*argv);
@@ -172,45 +228,119 @@ int MAIN(int argc, char **argv)
 		{
 bad:
 		for (pp=crl_usage; (*pp != NULL); pp++)
-			BIO_printf(bio_err,*pp);
+			BIO_printf(bio_err,"%s",*pp);
 		goto end;
 		}
 
 	ERR_load_crypto_strings();
-	X509V3_add_standard_extensions();
 	x=load_crl(infile,informat);
 	if (x == NULL) { goto end; }
 
+	if(do_ver) {
+		store = X509_STORE_new();
+		lookup=X509_STORE_add_lookup(store,X509_LOOKUP_file());
+		if (lookup == NULL) goto end;
+		if (!X509_LOOKUP_load_file(lookup,CAfile,X509_FILETYPE_PEM))
+			X509_LOOKUP_load_file(lookup,NULL,X509_FILETYPE_DEFAULT);
+			
+		lookup=X509_STORE_add_lookup(store,X509_LOOKUP_hash_dir());
+		if (lookup == NULL) goto end;
+		if (!X509_LOOKUP_add_dir(lookup,CApath,X509_FILETYPE_PEM))
+			X509_LOOKUP_add_dir(lookup,NULL,X509_FILETYPE_DEFAULT);
+		ERR_clear_error();
+
+		if(!X509_STORE_CTX_init(&ctx, store, NULL, NULL)) {
+			BIO_printf(bio_err,
+				"Error initialising X509 store\n");
+			goto end;
+		}
+
+		i = X509_STORE_get_by_subject(&ctx, X509_LU_X509, 
+					X509_CRL_get_issuer(x), &xobj);
+		if(i <= 0) {
+			BIO_printf(bio_err,
+				"Error getting CRL issuer certificate\n");
+			goto end;
+		}
+		pkey = X509_get_pubkey(xobj.data.x509);
+		X509_OBJECT_free_contents(&xobj);
+		if(!pkey) {
+			BIO_printf(bio_err,
+				"Error getting CRL issuer public key\n");
+			goto end;
+		}
+		i = X509_CRL_verify(x, pkey);
+		EVP_PKEY_free(pkey);
+		if(i < 0) goto end;
+		if(i == 0) BIO_printf(bio_err, "verify failure\n");
+		else BIO_printf(bio_err, "verify OK\n");
+	}
+
 	if (num)
 		{
 		for (i=1; i<=num; i++)
 			{
 			if (issuer == i)
 				{
-				X509_NAME_oneline(x->crl->issuer,buf,256);
-				BIO_printf(bio_out,"issuer= %s\n",buf);
+				print_name(bio_out, "issuer=", X509_CRL_get_issuer(x), nmflag);
+				}
+			if (crlnumber == i)
+				{
+				ASN1_INTEGER *crlnum;
+				crlnum = X509_CRL_get_ext_d2i(x, NID_crl_number,
+							      NULL, NULL);
+				BIO_printf(bio_out,"crlNumber=");
+				if (crlnum)
+					{
+					i2a_ASN1_INTEGER(bio_out, crlnum);
+					ASN1_INTEGER_free(crlnum);
+					}
+				else
+					BIO_puts(bio_out, "<NONE>");
+				BIO_printf(bio_out,"\n");
 				}
-
 			if (hash == i)
 				{
 				BIO_printf(bio_out,"%08lx\n",
-					X509_NAME_hash(x->crl->issuer));
+					X509_NAME_hash(X509_CRL_get_issuer(x)));
 				}
 			if (lastupdate == i)
 				{
 				BIO_printf(bio_out,"lastUpdate=");
-				ASN1_TIME_print(bio_out,x->crl->lastUpdate);
+				ASN1_TIME_print(bio_out,
+						X509_CRL_get_lastUpdate(x));
 				BIO_printf(bio_out,"\n");
 				}
 			if (nextupdate == i)
 				{
 				BIO_printf(bio_out,"nextUpdate=");
-				if (x->crl->nextUpdate != NULL)
-					ASN1_TIME_print(bio_out,x->crl->nextUpdate);
+				if (X509_CRL_get_nextUpdate(x)) 
+					ASN1_TIME_print(bio_out,
+						X509_CRL_get_nextUpdate(x));
 				else
 					BIO_printf(bio_out,"NONE");
 				BIO_printf(bio_out,"\n");
 				}
+			if (fingerprint == i)
+				{
+				int j;
+				unsigned int n;
+				unsigned char md[EVP_MAX_MD_SIZE];
+
+				if (!X509_CRL_digest(x,digest,md,&n))
+					{
+					BIO_printf(bio_err,"out of memory\n");
+					goto end;
+					}
+				BIO_printf(bio_out,"%s Fingerprint=",
+						OBJ_nid2sn(EVP_MD_type(digest)));
+				for (j=0; j<(int)n; j++)
+					{
+					BIO_printf(bio_out,"%02X%c",md[j],
+						(j+1 == (int)n)
+						?'\n':':');
+					}
+				}
 			}
 		}
 
@@ -222,7 +352,15 @@ bad:
 		}
 
 	if (outfile == NULL)
+		{
 		BIO_set_fp(out,stdout,BIO_NOCLOSE);
+#ifdef OPENSSL_SYS_VMS
+		{
+		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+		out = BIO_push(tmpbio, out);
+		}
+#endif
+		}
 	else
 		{
 		if (BIO_write_filename(out,outfile) <= 0)
@@ -234,7 +372,11 @@ bad:
 
 	if (text) X509_CRL_print(out, x);
 
-	if (noout) goto end;
+	if (noout) 
+		{
+		ret = 0;
+		goto end;
+		}
 
 	if 	(outformat == FORMAT_ASN1)
 		i=(int)i2d_X509_CRL_bio(out,x);
@@ -248,11 +390,16 @@ bad:
 	if (!i) { BIO_printf(bio_err,"unable to write CRL\n"); goto end; }
 	ret=0;
 end:
-	BIO_free(out);
-	BIO_free(bio_out);
+	BIO_free_all(out);
+	BIO_free_all(bio_out);
+	bio_out=NULL;
 	X509_CRL_free(x);
-	X509V3_EXT_cleanup();
-	EXIT(ret);
+	if(store) {
+		X509_STORE_CTX_cleanup(&ctx);
+		X509_STORE_free(store);
+	}
+	apps_shutdown();
+	OPENSSL_EXIT(ret);
 	}
 
 static X509_CRL *load_crl(char *infile, int format)

apps/crl2p7.c

@@ -63,7 +63,6 @@
 #include <stdio.h>
 #include <string.h>
 #include <sys/types.h>
-#include <sys/stat.h>
 #include "apps.h"
 #include <openssl/err.h>
 #include <openssl/evp.h>
@@ -76,12 +75,14 @@ static int add_certs_from_file(STACK_OF(X509) *stack, char *certfile);
 #undef PROG
 #define PROG	crl2pkcs7_main
 
-/* -inform arg	- input format - default PEM (one of DER, TXT or PEM)
+/* -inform arg	- input format - default PEM (DER or PEM)
  * -outform arg - output format - default PEM
  * -in arg	- input file - default stdin
  * -out arg	- output file - default stdout
  */
 
+int MAIN(int, char **);
+
 int MAIN(int argc, char **argv)
 	{
 	int i,badops=0;
@@ -91,7 +92,7 @@ int MAIN(int argc, char **argv)
 	PKCS7 *p7 = NULL;
 	PKCS7_SIGNED *p7s = NULL;
 	X509_CRL *crl=NULL;
-	STACK *certflst=NULL;
+	STACK_OF(OPENSSL_STRING) *certflst=NULL;
 	STACK_OF(X509_CRL) *crl_stack=NULL;
 	STACK_OF(X509) *cert_stack=NULL;
 	int ret=1,nocrl=0;
@@ -139,8 +140,8 @@ int MAIN(int argc, char **argv)
 		else if (strcmp(*argv,"-certfile") == 0)
 			{
 			if (--argc < 1) goto bad;
-			if(!certflst) certflst = sk_new(NULL);
-			sk_push(certflst,*(++argv));
+			if(!certflst) certflst = sk_OPENSSL_STRING_new_null();
+			sk_OPENSSL_STRING_push(certflst,*(++argv));
 			}
 		else
 			{
@@ -157,14 +158,15 @@ int MAIN(int argc, char **argv)
 bad:
 		BIO_printf(bio_err,"%s [options] <infile >outfile\n",prog);
 		BIO_printf(bio_err,"where options are\n");
-		BIO_printf(bio_err," -inform arg    input format - one of DER TXT PEM\n");
-		BIO_printf(bio_err," -outform arg   output format - one of DER TXT PEM\n");
+		BIO_printf(bio_err," -inform arg    input format - DER or PEM\n");
+		BIO_printf(bio_err," -outform arg   output format - DER or PEM\n");
 		BIO_printf(bio_err," -in arg        input file\n");
 		BIO_printf(bio_err," -out arg       output file\n");
 		BIO_printf(bio_err," -certfile arg  certificates file of chain to a trusted CA\n");
 		BIO_printf(bio_err,"                (can be used more than once)\n");
 		BIO_printf(bio_err," -nocrl         no crl to load, just certs from '-certfile'\n");
-		EXIT(1);
+		ret = 1;
+		goto end;
 		}
 
 	ERR_load_crypto_strings();
@@ -213,19 +215,19 @@ bad:
 	p7s->contents->type=OBJ_nid2obj(NID_pkcs7_data);
 
 	if (!ASN1_INTEGER_set(p7s->version,1)) goto end;
-	if ((crl_stack=sk_X509_CRL_new(NULL)) == NULL) goto end;
+	if ((crl_stack=sk_X509_CRL_new_null()) == NULL) goto end;
 	p7s->crl=crl_stack;
 	if (crl != NULL)
 		{
 		sk_X509_CRL_push(crl_stack,crl);
-		crl=NULL; /* now part of p7 for Freeing */
+		crl=NULL; /* now part of p7 for OPENSSL_freeing */
 		}
 
-	if ((cert_stack=sk_X509_new(NULL)) == NULL) goto end;
+	if ((cert_stack=sk_X509_new_null()) == NULL) goto end;
 	p7s->cert=cert_stack;
 
-	if(certflst) for(i = 0; i < sk_num(certflst); i++) {
-		certfile = sk_value(certflst, i);
+	if(certflst) for(i = 0; i < sk_OPENSSL_STRING_num(certflst); i++) {
+		certfile = sk_OPENSSL_STRING_value(certflst, i);
 		if (add_certs_from_file(cert_stack,certfile) < 0)
 			{
 			BIO_printf(bio_err, "error loading certificates\n");
@@ -234,10 +236,18 @@ bad:
 			}
 	}
 
-	sk_free(certflst);
+	sk_OPENSSL_STRING_free(certflst);
 
 	if (outfile == NULL)
+		{
 		BIO_set_fp(out,stdout,BIO_NOCLOSE);
+#ifdef OPENSSL_SYS_VMS
+		{
+		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+		out = BIO_push(tmpbio, out);
+		}
+#endif
+		}
 	else
 		{
 		if (BIO_write_filename(out,outfile) <= 0)
@@ -264,11 +274,12 @@ bad:
 	ret=0;
 end:
 	if (in != NULL) BIO_free(in);
-	if (out != NULL) BIO_free(out);
+	if (out != NULL) BIO_free_all(out);
 	if (p7 != NULL) PKCS7_free(p7);
 	if (crl != NULL) X509_CRL_free(crl);
 
-	EXIT(ret);
+	apps_shutdown();
+	OPENSSL_EXIT(ret);
 	}
 
 /*
@@ -283,19 +294,12 @@ end:
  */
 static int add_certs_from_file(STACK_OF(X509) *stack, char *certfile)
 	{
-	struct stat st;
 	BIO *in=NULL;
 	int count=0;
 	int ret= -1;
 	STACK_OF(X509_INFO) *sk=NULL;
 	X509_INFO *xi;
 
-	if ((stat(certfile,&st) != 0))
-		{
-		BIO_printf(bio_err,"unable to load the file, %s\n",certfile);
-		goto end;
-		}
-
 	in=BIO_new(BIO_s_file());
 	if ((in == NULL) || (BIO_read_filename(in,certfile) <= 0))
 		{
@@ -325,7 +329,7 @@ static int add_certs_from_file(STACK_OF(X509) *stack, char *certfile)
 
 	ret=count;
 end:
- 	/* never need to Free x */
+ 	/* never need to OPENSSL_free x */
 	if (in != NULL) BIO_free(in);
 	if (sk != NULL) sk_X509_INFO_free(sk);
 	return(ret);

apps/der_chop.in

@@ -1,305 +0,0 @@
-#!/usr/local/bin/perl
-#
-# der_chop ... this is one total hack that Eric is really not proud of
-#              so don't look at it and don't ask for support
-#
-# The "documentation" for this (i.e. all the comments) are my fault --tjh
-#
-# This program takes the "raw" output of derparse/asn1parse and 
-# converts it into tokens and then runs regular expression matches
-# to try to figure out what to grab to get the things that are needed
-# and it is possible that this will do the wrong thing as it is a *hack*
-#
-# SSLeay 0.5.2+ should have direct read support for x509 (via -inform NET)
-# [I know ... promises promises :-)]
-#
-# To convert a Netscape Certificate:
-#    der_chop < ServerCert.der > cert.pem
-# To convert a Netscape Key (and encrypt it again to protect it)
-#    rsa -inform NET -in ServerKey.der -des > key.pem
-#
-# 23-Apr-96 eay    Added the extra ASN.1 string types, I still think this
-#		   is an evil hack.  If nothing else the parsing should
-#		   be relative, not absolute.
-# 19-Apr-96 tjh    hacked (with eay) into 0.5.x format
-#
-# Tim Hudson
-# tjh@cryptsoft.com
-#
-
-
-require 'getopts.pl';
-
-$debug=0;
-
-# this was the 0.4.x way of doing things ...
-$cmd="derparse";
-$x509_cmd="x509";
-$crl_cmd="crl";
-$rc4_cmd="rc4";
-$md2_cmd="md2";
-$md4_cmd="md4";
-$rsa_cmd="rsa -des -inform der ";
-
-# this was the 0.5.x way of doing things ...
-$cmd="openssl asn1parse";
-$x509_cmd="openssl x509";
-$crl_cmd="openssl crl";
-$rc4_cmd="openssl rc4";
-$md2_cmd="openssl md2";
-$md4_cmd="openssl md4";
-$rsa_cmd="openssl rsa -des -inform der ";
-
-&Getopts('vd:') || die "usage:$0 [-v] [-d num] file";
-$depth=($opt_d =~ /^\d+$/)?$opt_d:0;
-
-&init_der();
-
-if ($#ARGV != -1)
-	{
-	foreach $file (@ARGV)
-		{
-		print STDERR "doing $file\n";
-		&dofile($file);
-		}
-	}
-else
-	{
-	$file="/tmp/a$$.DER";
-	open(OUT,">$file") || die "unable to open $file:$!\n";
-	for (;;)
-		{
-		$i=sysread(STDIN,$b,1024*10);
-		last if ($i <= 0);
-		$i=syswrite(OUT,$b,$i);
-		}
-	&dofile($file);
-	unlink($file);
-	}
-	
-sub dofile
-	{
-	local($file)=@_;
-	local(@p);
-
-	$b=&load_file($file);
-	@p=&load_file_parse($file);
-
-	foreach $_ (@p)
-		{
-		($off,$d,$hl,$len)=&parse_line($_);
-		$d-=$depth;
-		next if ($d != 0);
-		next if ($len == 0);
-
-		$o=substr($b,$off,$len+$hl);
-		($str,@data)=&der_str($o);
-		print "$str\n" if ($opt_v);
-		if ($str =~ /^$crl/)
-			{
-			open(OUT,"|$crl_cmd -inform d -hash -issuer") ||
-				die "unable to run $crl_cmd:$!\n";
-			print OUT $o;
-			close(OUT);
-			}
-		elsif ($str =~ /^$x509/)
-			{
-			open(OUT,"|$x509_cmd -inform d -hash -subject -issuer")
-				|| die "unable to run $x509_cmd:$!\n";
-			print OUT $o;
-			close(OUT);
-			}
-		elsif ($str =~ /^$rsa/)
-			{
-			($type)=($data[3] =~ /OBJECT_IDENTIFIER :(.*)\s*$/);
-			next unless ($type eq "rsaEncryption");
-			($off,$d,$hl,$len)=&parse_line($data[5]);
-			$os=substr($o,$off+$hl,$len);
-			open(OUT,"|$rsa_cmd")
-				|| die "unable to run $rsa_cmd:$!\n";
-			print OUT $os;
-			close(OUT);
-			}
-		elsif ($str =~ /^0G-1D-1G/)
-			{
-			($off,$d,$hl,$len)=&parse_line($data[1]);
-			$os=substr($o,$off+$hl,$len);
-			print STDERR "<$os>\n" if $opt_v;
-			&do_certificate($o,@data)
-				if (($os eq "certificate") &&
-				    ($str =! /^0G-1D-1G-2G-3F-3E-2D/));
-			&do_private_key($o,@data)
-				if (($os eq "private-key") &&
-				    ($str =! /^0G-1D-1G-2G-3F-3E-2D/));
-			}
-		}
-	}
-
-sub der_str
-	{
-	local($str)=@_;
-	local(*OUT,*IN,@a,$t,$d,$ret);
-	local($file)="/tmp/b$$.DER";
-	local(@ret);
-
-	open(OUT,">$file");
-	print OUT $str;
-	close(OUT);
-	open(IN,"$cmd -inform 'd' -in $file |") ||
-		die "unable to run $cmd:$!\n";
-	$ret="";
-	while (<IN>)
-		{
-		chop;
-		push(@ret,$_);
-
-		print STDERR "$_\n" if ($debug);
-
-		@a=split(/\s*:\s*/);
-		($d)=($a[1] =~ /d=\s*(\d+)/);
-		$a[2] =~ s/\s+$//;
-		$t=$DER_s2i{$a[2]};
-		$ret.="$d$t-";
-		}
-	close(IN);
-	unlink($file);
-	chop $ret;
-	$ret =~ s/(-3H(-4G-5F-5[IJKMQRS])+)+/-NAME/g;
-	$ret =~ s/(-3G-4B-4L)+/-RCERT/g;
-	return($ret,@ret);
-	}
-
-sub init_der
-	{
-	$crl= "0G-1G-2G-3F-3E-2G-NAME-2L-2L-2G-RCERT-1G-2F-2E-1C";
-	$x509="0G-1G-2B-2G-3F-3E-2G-NAME-2G-3L-3L-2G-NAME-2G-3G-4F-4E-3C-1G-2F-2E-1C";
-	$rsa= "0G-1B-1G-2F-2E-1D";
-
-	%DER_i2s=(
-		# SSLeay 0.4.x has this list
-		"A","EOC",
-		"B","INTEGER",
-		"C","BIT STRING",
-		"D","OCTET STRING",
-		"E","NULL",
-		"F","OBJECT",
-		"G","SEQUENCE",
-		"H","SET",
-		"I","PRINTABLESTRING",
-		"J","T61STRING",
-		"K","IA5STRING",
-		"L","UTCTIME",
-		"M","NUMERICSTRING",
-		"N","VIDEOTEXSTRING",
-		"O","GENERALIZEDTIME",
-		"P","GRAPHICSTRING",
-		"Q","ISO64STRING",
-		"R","GENERALSTRING",
-		"S","UNIVERSALSTRING",
-
-		# SSLeay 0.5.x changed some things ... and I'm
-		# leaving in the old stuff but adding in these
-		# to handle the new as well --tjh
-		# - Well I've just taken them out and added the extra new
-		# ones :-) - eay
-		);
-
-	foreach (keys %DER_i2s)
-		{ $DER_s2i{$DER_i2s{$_}}=$_; }
-	}
-
-sub parse_line
-	{
-	local($_)=@_;
-
-	return(/\s*(\d+):d=\s*(\d+)\s+hl=\s*(\d+)\s+l=\s*(\d+|inf)\s/);
-	}
-
-#  0:d=0 hl=4 l=377 cons: univ: SEQUENCE          
-#  4:d=1 hl=2 l= 11 prim: univ: OCTET_STRING      
-# 17:d=1 hl=4 l=360 cons: univ: SEQUENCE          
-# 21:d=2 hl=2 l= 12 cons: univ: SEQUENCE          
-# 23:d=3 hl=2 l=  8 prim: univ: OBJECT_IDENTIFIER :rc4
-# 33:d=3 hl=2 l=  0 prim: univ: NULL              
-# 35:d=2 hl=4 l=342 prim: univ: OCTET_STRING
-sub do_private_key
-	{
-	local($data,@struct)=@_;
-	local($file)="/tmp/b$$.DER";
-	local($off,$d,$hl,$len,$_,$b,@p,$s);
-
-	($type)=($struct[4] =~ /OBJECT_IDENTIFIER :(.*)\s*$/);
-	if ($type eq "rc4")
-		{
-		($off,$d,$hl,$len)=&parse_line($struct[6]);
-		open(OUT,"|$rc4_cmd >$file") ||
-			die "unable to run $rc4_cmd:$!\n";
-		print OUT substr($data,$off+$hl,$len);
-		close(OUT);
-
-		$b=&load_file($file);
-		unlink($file);
-
-		($s,@p)=&der_str($b);
-		die "unknown rsa key type\n$s\n"
-			if ($s ne '0G-1B-1G-2F-2E-1D');
-		local($off,$d,$hl,$len)=&parse_line($p[5]);
-		$b=substr($b,$off+$hl,$len);
-		($s,@p)=&der_str($b);
-		open(OUT,"|$rsa_cmd") || die "unable to run $rsa_cmd:$!\n";
-		print OUT $b;
-		close(OUT);
-		}
-	else
-		{
-		print "'$type' is unknown\n";
-		exit(1);
-		}
-	}
-
-sub do_certificate
-	{
-	local($data,@struct)=@_;
-	local($file)="/tmp/b$$.DER";
-	local($off,$d,$hl,$len,$_,$b,@p,$s);
-
-	($off,$d,$hl,$len)=&parse_line($struct[2]);
-	$b=substr($data,$off,$len+$hl);
-
-	open(OUT,"|$x509_cmd -inform d") || die "unable to run $x509_cmd:$!\n";
-	print OUT $b;
-	close(OUT);
-	}
-
-sub load_file
-	{
-	local($file)=@_;
-	local(*IN,$r,$b,$i);
-
-	$r="";
-	open(IN,"<$file") || die "unable to open $file:$!\n";
-	for (;;)
-		{
-		$i=sysread(IN,$b,10240);
-		last if ($i <= 0);
-		$r.=$b;
-		}
-	close(IN);
-	return($r);
-	}
-
-sub load_file_parse
-	{
-	local($file)=@_;
-	local(*IN,$r,@ret,$_,$i,$n,$b);
-
-	open(IN,"$cmd -inform d -in $file|")
-		|| die "unable to run der_parse\n";
-	while (<IN>)
-		{
-		chop;
-		push(@ret,$_);
-		}
-	return($r,@ret);
-	}
-

apps/dgst.c

@@ -66,6 +66,7 @@
 #include <openssl/objects.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
+#include <openssl/hmac.h>
 
 #undef BUFSIZE
 #define BUFSIZE	1024*8
@@ -73,23 +74,64 @@
 #undef PROG
 #define PROG	dgst_main
 
-void do_fp(unsigned char *buf,BIO *f,int sep);
+int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
+	  EVP_PKEY *key, unsigned char *sigin, int siglen,
+	  const char *sig_name, const char *md_name,
+	  const char *file,BIO *bmd);
+
+static void list_md_fn(const EVP_MD *m,
+			const char *from, const char *to, void *arg)
+	{
+	const char *mname;
+	/* Skip aliases */
+	if (!m)
+		return;
+	mname = OBJ_nid2ln(EVP_MD_type(m));
+	/* Skip shortnames */
+	if (strcmp(from, mname))
+		return;
+	/* Skip clones */
+	if (EVP_MD_flags(m) & EVP_MD_FLAG_PKEY_DIGEST)
+		return;
+	if (strchr(mname, ' '))
+		mname= EVP_MD_name(m);
+	BIO_printf(arg, "-%-14s to use the %s message digest algorithm\n",
+			mname, mname);
+	}
+
+int MAIN(int, char **);
+
 int MAIN(int argc, char **argv)
 	{
+	ENGINE *e = NULL;
 	unsigned char *buf=NULL;
-	int i,err=0;
+	int i,err=1;
 	const EVP_MD *md=NULL,*m;
 	BIO *in=NULL,*inp;
 	BIO *bmd=NULL;
-	const char *name;
-#define PROG_NAME_SIZE  16
-	char pname[PROG_NAME_SIZE];
+	BIO *out = NULL;
+#define PROG_NAME_SIZE  39
+	char pname[PROG_NAME_SIZE+1];
 	int separator=0;
 	int debug=0;
+	int keyform=FORMAT_PEM;
+	const char *outfile = NULL, *keyfile = NULL;
+	const char *sigfile = NULL, *randfile = NULL;
+	int out_bin = -1, want_pub = 0, do_verify = 0;
+	EVP_PKEY *sigkey = NULL;
+	unsigned char *sigbuf = NULL;
+	int siglen = 0;
+	char *passargin = NULL, *passin = NULL;
+#ifndef OPENSSL_NO_ENGINE
+	char *engine=NULL;
+#endif
+	char *hmac_key=NULL;
+	char *mac_name=NULL;
+	STACK_OF(OPENSSL_STRING) *sigopts = NULL, *macopts = NULL;
 
 	apps_startup();
 
-	if ((buf=(unsigned char *)Malloc(BUFSIZE)) == NULL)
+	if ((buf=(unsigned char *)OPENSSL_malloc(BUFSIZE)) == NULL)
 		{
 		BIO_printf(bio_err,"out of memory\n");
 		goto end;
@@ -98,8 +140,11 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
+	if (!load_config(bio_err, NULL))
+		goto end;
+
 	/* first check the program name */
-	program_name(argv[0],pname,PROG_NAME_SIZE);
+	program_name(argv[0],pname,sizeof pname);
 
 	md=EVP_get_digestbyname(pname);
 
@@ -110,8 +155,96 @@ int MAIN(int argc, char **argv)
 		if ((*argv)[0] != '-') break;
 		if (strcmp(*argv,"-c") == 0)
 			separator=1;
+		else if (strcmp(*argv,"-r") == 0)
+			separator=2;
+		else if (strcmp(*argv,"-rand") == 0)
+			{
+			if (--argc < 1) break;
+			randfile=*(++argv);
+			}
+		else if (strcmp(*argv,"-out") == 0)
+			{
+			if (--argc < 1) break;
+			outfile=*(++argv);
+			}
+		else if (strcmp(*argv,"-sign") == 0)
+			{
+			if (--argc < 1) break;
+			keyfile=*(++argv);
+			}
+		else if (!strcmp(*argv,"-passin"))
+			{
+			if (--argc < 1)
+				break;
+			passargin=*++argv;
+			}
+		else if (strcmp(*argv,"-verify") == 0)
+			{
+			if (--argc < 1) break;
+			keyfile=*(++argv);
+			want_pub = 1;
+			do_verify = 1;
+			}
+		else if (strcmp(*argv,"-prverify") == 0)
+			{
+			if (--argc < 1) break;
+			keyfile=*(++argv);
+			do_verify = 1;
+			}
+		else if (strcmp(*argv,"-signature") == 0)
+			{
+			if (--argc < 1) break;
+			sigfile=*(++argv);
+			}
+		else if (strcmp(*argv,"-keyform") == 0)
+			{
+			if (--argc < 1) break;
+			keyform=str2fmt(*(++argv));
+			}
+#ifndef OPENSSL_NO_ENGINE
+		else if (strcmp(*argv,"-engine") == 0)
+			{
+			if (--argc < 1) break;
+			engine= *(++argv);
+        		e = setup_engine(bio_err, engine, 0);
+			}
+#endif
+		else if (strcmp(*argv,"-hex") == 0)
+			out_bin = 0;
+		else if (strcmp(*argv,"-binary") == 0)
+			out_bin = 1;
 		else if (strcmp(*argv,"-d") == 0)
 			debug=1;
+		else if (!strcmp(*argv,"-hmac"))
+			{
+			if (--argc < 1)
+				break;
+			hmac_key=*++argv;
+			}
+		else if (!strcmp(*argv,"-mac"))
+			{
+			if (--argc < 1)
+				break;
+			mac_name=*++argv;
+			}
+		else if (strcmp(*argv,"-sigopt") == 0)
+			{
+			if (--argc < 1)
+				break;
+			if (!sigopts)
+				sigopts = sk_OPENSSL_STRING_new_null();
+			if (!sigopts || !sk_OPENSSL_STRING_push(sigopts, *(++argv)))
+				break;
+			}
+		else if (strcmp(*argv,"-macopt") == 0)
+			{
+			if (--argc < 1)
+				break;
+			if (!macopts)
+				macopts = sk_OPENSSL_STRING_new_null();
+			if (!macopts || !sk_OPENSSL_STRING_push(macopts, *(++argv)))
+				break;
+			}
 		else if ((m=EVP_get_digestbyname(&((*argv)[1]))) != NULL)
 			md=m;
 		else
@@ -120,38 +253,52 @@ int MAIN(int argc, char **argv)
 		argv++;
 		}
 
-	if (md == NULL)
-		md=EVP_md5();
+
+	if(do_verify && !sigfile) {
+		BIO_printf(bio_err, "No signature to verify: use the -signature option\n");
+		goto end;
+	}
 
 	if ((argc > 0) && (argv[0][0] == '-')) /* bad option */
 		{
 		BIO_printf(bio_err,"unknown option '%s'\n",*argv);
 		BIO_printf(bio_err,"options are\n");
-		BIO_printf(bio_err,"-c   to output the digest with separating colons\n");
-		BIO_printf(bio_err,"-d   to output debug info\n");
-		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm (default)\n",
-			LN_md5,LN_md5);
-		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
-			LN_md2,LN_md2);
-		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
-			LN_sha1,LN_sha1);
-		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
-			LN_sha,LN_sha);
-		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
-			LN_mdc2,LN_mdc2);
-		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
-			LN_ripemd160,LN_ripemd160);
-		err=1;
+		BIO_printf(bio_err,"-c              to output the digest with separating colons\n");
+		BIO_printf(bio_err,"-r              to output the digest in coreutils format\n");
+		BIO_printf(bio_err,"-d              to output debug info\n");
+		BIO_printf(bio_err,"-hex            output as hex dump\n");
+		BIO_printf(bio_err,"-binary         output in binary form\n");
+		BIO_printf(bio_err,"-sign   file    sign digest using private key in file\n");
+		BIO_printf(bio_err,"-verify file    verify a signature using public key in file\n");
+		BIO_printf(bio_err,"-prverify file  verify a signature using private key in file\n");
+		BIO_printf(bio_err,"-keyform arg    key file format (PEM or ENGINE)\n");
+		BIO_printf(bio_err,"-out filename   output to filename rather than stdout\n");
+		BIO_printf(bio_err,"-signature file signature to verify\n");
+		BIO_printf(bio_err,"-sigopt nm:v    signature parameter\n");
+		BIO_printf(bio_err,"-hmac key       create hashed MAC with key\n");
+		BIO_printf(bio_err,"-mac algorithm  create MAC (not neccessarily HMAC)\n"); 
+		BIO_printf(bio_err,"-macopt nm:v    MAC algorithm parameters or key\n");
+#ifndef OPENSSL_NO_ENGINE
+		BIO_printf(bio_err,"-engine e       use engine e, possibly a hardware device.\n");
+#endif
+
+		EVP_MD_do_all_sorted(list_md_fn, bio_err);
 		goto end;
 		}
-	
+
 	in=BIO_new(BIO_s_file());
 	bmd=BIO_new(BIO_f_md());
 	if (debug)
 		{
 		BIO_set_callback(in,BIO_debug_callback);
 		/* needed for windows 3.1 */
-		BIO_set_callback_arg(in,bio_err);
+		BIO_set_callback_arg(in,(char *)bio_err);
+		}
+
+	if(!app_passwd(bio_err, passargin, NULL, &passin, NULL))
+		{
+		BIO_printf(bio_err, "Error getting password\n");
+		goto end;
 		}
 
 	if ((in == NULL) || (bmd == NULL))
@@ -160,60 +307,326 @@ int MAIN(int argc, char **argv)
 		goto end;
 		}
 
+	if(out_bin == -1) {
+		if(keyfile)
+			out_bin = 1;
+		else
+			out_bin = 0;
+	}
+
+	if(randfile)
+		app_RAND_load_file(randfile, bio_err, 0);
+
+	if(outfile) {
+		if(out_bin)
+			out = BIO_new_file(outfile, "wb");
+		else    out = BIO_new_file(outfile, "w");
+	} else {
+		out = BIO_new_fp(stdout, BIO_NOCLOSE);
+#ifdef OPENSSL_SYS_VMS
+		{
+		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+		out = BIO_push(tmpbio, out);
+		}
+#endif
+	}
+
+	if(!out) {
+		BIO_printf(bio_err, "Error opening output file %s\n", 
+					outfile ? outfile : "(stdout)");
+		ERR_print_errors(bio_err);
+		goto end;
+	}
+	if ((!!mac_name + !!keyfile + !!hmac_key) > 1)
+		{
+		BIO_printf(bio_err, "MAC and Signing key cannot both be specified\n");
+		goto end;
+		}
+
+	if(keyfile)
+		{
+		if (want_pub)
+			sigkey = load_pubkey(bio_err, keyfile, keyform, 0, NULL,
+				e, "key file");
+		else
+			sigkey = load_key(bio_err, keyfile, keyform, 0, passin,
+				e, "key file");
+		if (!sigkey)
+			{
+			/* load_[pub]key() has already printed an appropriate
+			   message */
+			goto end;
+			}
+		}
+
+	if (mac_name)
+		{
+		EVP_PKEY_CTX *mac_ctx = NULL;
+		int r = 0;
+		if (!init_gen_str(bio_err, &mac_ctx, mac_name,e, 0))
+			goto mac_end;
+		if (macopts)
+			{
+			char *macopt;
+			for (i = 0; i < sk_OPENSSL_STRING_num(macopts); i++)
+				{
+				macopt = sk_OPENSSL_STRING_value(macopts, i);
+				if (pkey_ctrl_string(mac_ctx, macopt) <= 0)
+					{
+					BIO_printf(bio_err,
+						"MAC parameter error \"%s\"\n",
+						macopt);
+					ERR_print_errors(bio_err);
+					goto mac_end;
+					}
+				}
+			}
+		if (EVP_PKEY_keygen(mac_ctx, &sigkey) <= 0)
+			{
+			BIO_puts(bio_err, "Error generating key\n");
+			ERR_print_errors(bio_err);
+			goto mac_end;
+			}
+		r = 1;
+		mac_end:
+		if (mac_ctx)
+			EVP_PKEY_CTX_free(mac_ctx);
+		if (r == 0)
+			goto end;
+		}
+
+	if (hmac_key)
+		{
+		sigkey = EVP_PKEY_new_mac_key(EVP_PKEY_HMAC, e,
+					(unsigned char *)hmac_key, -1);
+		if (!sigkey)
+			goto end;
+		}
+
+	if (sigkey)
+		{
+		EVP_MD_CTX *mctx = NULL;
+		EVP_PKEY_CTX *pctx = NULL;
+		int r;
+		if (!BIO_get_md_ctx(bmd, &mctx))
+			{
+			BIO_printf(bio_err, "Error getting context\n");
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+		if (do_verify)
+			r = EVP_DigestVerifyInit(mctx, &pctx, md, e, sigkey);
+		else
+			r = EVP_DigestSignInit(mctx, &pctx, md, e, sigkey);
+		if (!r)
+			{
+			BIO_printf(bio_err, "Error setting context\n");
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+		if (sigopts)
+			{
+			char *sigopt;
+			for (i = 0; i < sk_OPENSSL_STRING_num(sigopts); i++)
+				{
+				sigopt = sk_OPENSSL_STRING_value(sigopts, i);
+				if (pkey_ctrl_string(pctx, sigopt) <= 0)
+					{
+					BIO_printf(bio_err,
+						"parameter error \"%s\"\n",
+						sigopt);
+					ERR_print_errors(bio_err);
+					goto end;
+					}
+				}
+			}
+		}
 	/* we use md as a filter, reading from 'in' */
-	BIO_set_md(bmd,md);
+	else
+		{
+		if (md == NULL)
+			md = EVP_md5(); 
+		if (!BIO_set_md(bmd,md))
+			{
+			BIO_printf(bio_err, "Error setting digest %s\n", pname);
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+		}
+
+	if(sigfile && sigkey) {
+		BIO *sigbio;
+		sigbio = BIO_new_file(sigfile, "rb");
+		siglen = EVP_PKEY_size(sigkey);
+		sigbuf = OPENSSL_malloc(siglen);
+		if(!sigbio) {
+			BIO_printf(bio_err, "Error opening signature file %s\n",
+								sigfile);
+			ERR_print_errors(bio_err);
+			goto end;
+		}
+		siglen = BIO_read(sigbio, sigbuf, siglen);
+		BIO_free(sigbio);
+		if(siglen <= 0) {
+			BIO_printf(bio_err, "Error reading signature file %s\n",
+								sigfile);
+			ERR_print_errors(bio_err);
+			goto end;
+		}
+	}
 	inp=BIO_push(bmd,in);
 
+	if (md == NULL)
+		{
+		EVP_MD_CTX *tctx;
+		BIO_get_md_ctx(bmd, &tctx);
+		md = EVP_MD_CTX_md(tctx);
+		}
+
 	if (argc == 0)
 		{
 		BIO_set_fp(in,stdin,BIO_NOCLOSE);
-		do_fp(buf,inp,separator);
+		err=do_fp(out, buf,inp,separator, out_bin, sigkey, sigbuf,
+			  siglen,NULL,NULL,"stdin",bmd);
 		}
 	else
 		{
-		name=OBJ_nid2sn(md->type);
+		const char *md_name = NULL, *sig_name = NULL;
+		if(!out_bin)
+			{
+			if (sigkey)
+				{
+				const EVP_PKEY_ASN1_METHOD *ameth;
+				ameth = EVP_PKEY_get0_asn1(sigkey);
+				if (ameth)
+					EVP_PKEY_asn1_get0_info(NULL, NULL,
+						NULL, NULL, &sig_name, ameth);
+				}
+			md_name = EVP_MD_name(md);
+			}
+		err = 0;
 		for (i=0; i<argc; i++)
 			{
+			int r;
 			if (BIO_read_filename(in,argv[i]) <= 0)
 				{
 				perror(argv[i]);
 				err++;
 				continue;
 				}
-			printf("%s(%s)= ",name,argv[i]);
-			do_fp(buf,inp,separator);
+			else
+			r=do_fp(out,buf,inp,separator,out_bin,sigkey,sigbuf,
+				siglen,sig_name,md_name, argv[i],bmd);
+			if(r)
+			    err=r;
 			(void)BIO_reset(bmd);
 			}
 		}
 end:
 	if (buf != NULL)
 		{
-		memset(buf,0,BUFSIZE);
-		Free(buf);
+		OPENSSL_cleanse(buf,BUFSIZE);
+		OPENSSL_free(buf);
 		}
 	if (in != NULL) BIO_free(in);
+	if (passin)
+		OPENSSL_free(passin);
+	BIO_free_all(out);
+	EVP_PKEY_free(sigkey);
+	if (sigopts)
+		sk_OPENSSL_STRING_free(sigopts);
+	if (macopts)
+		sk_OPENSSL_STRING_free(macopts);
+	if(sigbuf) OPENSSL_free(sigbuf);
 	if (bmd != NULL) BIO_free(bmd);
-	EXIT(err);
+	apps_shutdown();
+	OPENSSL_EXIT(err);
 	}
 
-void do_fp(unsigned char *buf, BIO *bp, int sep)
+int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
+	  EVP_PKEY *key, unsigned char *sigin, int siglen,
+	  const char *sig_name, const char *md_name,
+	  const char *file,BIO *bmd)
 	{
-	int len;
+	size_t len;
 	int i;
 
 	for (;;)
 		{
 		i=BIO_read(bp,(char *)buf,BUFSIZE);
-		if (i <= 0) break;
+		if(i < 0)
+			{
+			BIO_printf(bio_err, "Read Error in %s\n",file);
+			ERR_print_errors(bio_err);
+			return 1;
+			}
+		if (i == 0) break;
 		}
-	len=BIO_gets(bp,(char *)buf,BUFSIZE);
-
-	for (i=0; i<len; i++)
+	if(sigin)
 		{
-		if (sep && (i != 0))
-			putc(':',stdout);
-		printf("%02x",buf[i]);
+		EVP_MD_CTX *ctx;
+		BIO_get_md_ctx(bp, &ctx);
+		i = EVP_DigestVerifyFinal(ctx, sigin, (unsigned int)siglen); 
+		if(i > 0)
+			BIO_printf(out, "Verified OK\n");
+		else if(i == 0)
+			{
+			BIO_printf(out, "Verification Failure\n");
+			return 1;
+			}
+		else
+			{
+			BIO_printf(bio_err, "Error Verifying Data\n");
+			ERR_print_errors(bio_err);
+			return 1;
+			}
+		return 0;
 		}
-	printf("\n");
+	if(key)
+		{
+		EVP_MD_CTX *ctx;
+		BIO_get_md_ctx(bp, &ctx);
+		len = BUFSIZE;
+		if(!EVP_DigestSignFinal(ctx, buf, &len)) 
+			{
+			BIO_printf(bio_err, "Error Signing Data\n");
+			ERR_print_errors(bio_err);
+			return 1;
+			}
+		}
+	else
+		{
+		len=BIO_gets(bp,(char *)buf,BUFSIZE);
+		if ((int)len <0)
+			{
+			ERR_print_errors(bio_err);
+			return 1;
+			}
+		}
+
+	if(binout) BIO_write(out, buf, len);
+	else if (sep == 2)
+		{
+		for (i=0; i<(int)len; i++)
+			BIO_printf(out, "%02x",buf[i]);
+		BIO_printf(out, " *%s\n", file);
+		}
+	else 
+		{
+		if (sig_name)
+			BIO_printf(out, "%s-%s(%s)= ", sig_name, md_name, file);
+		else if (md_name)
+			BIO_printf(out, "%s(%s)= ", md_name, file);
+		else
+			BIO_printf(out, "(%s)= ", file);
+		for (i=0; i<(int)len; i++)
+			{
+			if (sep && (i != 0))
+				BIO_printf(out, ":");
+			BIO_printf(out, "%02x",buf[i]);
+			}
+		BIO_printf(out, "\n");
+		}
+	return 0;
 	}
 

apps/dh.c

@@ -1,4 +1,5 @@
 /* apps/dh.c */
+/* obsoleted by dhparam.c */
 /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
  * All rights reserved.
  *
@@ -56,7 +57,8 @@
  * [including the GNU Public Licence.]
  */
 
-#ifndef NO_DH
+#include <openssl/opensslconf.h>	/* for OPENSSL_NO_DH */
+#ifndef OPENSSL_NO_DH
 #include <stdio.h>
 #include <stdlib.h>
 #include <time.h>
@@ -72,7 +74,7 @@
 #undef PROG
 #define PROG	dh_main
 
-/* -inform arg	- input format - default PEM (one of DER, TXT or PEM)
+/* -inform arg	- input format - default PEM (DER or PEM)
  * -outform arg - output format - default PEM
  * -in arg	- input file - default stdin
  * -out arg	- output file - default stdout
@@ -82,6 +84,8 @@
  * -C
  */
 
+int MAIN(int, char **);
+
 int MAIN(int argc, char **argv)
 	{
 	DH *dh=NULL;
@@ -89,6 +93,9 @@ int MAIN(int argc, char **argv)
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat,check=0,noout=0,C=0,ret=1;
 	char *infile,*outfile,*prog;
+#ifndef OPENSSL_NO_ENGINE
+	char *engine;
+#endif
 
 	apps_startup();
 
@@ -96,6 +103,12 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
+	if (!load_config(bio_err, NULL))
+		goto end;
+
+#ifndef OPENSSL_NO_ENGINE
+	engine=NULL;
+#endif
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -126,6 +139,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outfile= *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
+		else if (strcmp(*argv,"-engine") == 0)
+			{
+			if (--argc < 1) goto bad;
+			engine= *(++argv);
+			}
+#endif
 		else if (strcmp(*argv,"-check") == 0)
 			check=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -149,19 +169,26 @@ int MAIN(int argc, char **argv)
 bad:
 		BIO_printf(bio_err,"%s [options] <infile >outfile\n",prog);
 		BIO_printf(bio_err,"where options are\n");
-		BIO_printf(bio_err," -inform arg   input format - one of DER TXT PEM\n");
-		BIO_printf(bio_err," -outform arg  output format - one of DER TXT PEM\n");
+		BIO_printf(bio_err," -inform arg   input format - one of DER PEM\n");
+		BIO_printf(bio_err," -outform arg  output format - one of DER PEM\n");
 		BIO_printf(bio_err," -in arg       input file\n");
 		BIO_printf(bio_err," -out arg      output file\n");
 		BIO_printf(bio_err," -check        check the DH parameters\n");
 		BIO_printf(bio_err," -text         print a text form of the DH parameters\n");
 		BIO_printf(bio_err," -C            Output C code\n");
 		BIO_printf(bio_err," -noout        no output\n");
+#ifndef OPENSSL_NO_ENGINE
+		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
+#endif
 		goto end;
 		}
 
 	ERR_load_crypto_strings();
 
+#ifndef OPENSSL_NO_ENGINE
+        setup_engine(bio_err, engine, 0);
+#endif
+
 	in=BIO_new(BIO_s_file());
 	out=BIO_new(BIO_s_file());
 	if ((in == NULL) || (out == NULL))
@@ -181,7 +208,15 @@ bad:
 			}
 		}
 	if (outfile == NULL)
+		{
 		BIO_set_fp(out,stdout,BIO_NOCLOSE);
+#ifdef OPENSSL_SYS_VMS
+		{
+		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+		out = BIO_push(tmpbio, out);
+		}
+#endif
+		}
 	else
 		{
 		if (BIO_write_filename(out,outfile) <= 0)
@@ -219,7 +254,7 @@ bad:
 		BN_print(stdout,dh->g);
 		printf("\n");
 		if (dh->length != 0)
-			printf("recomented private length=%ld\n",dh->length);
+			printf("recommended private length=%ld\n",dh->length);
 #endif
 		}
 	
@@ -232,8 +267,8 @@ bad:
 			}
 		if (i & DH_CHECK_P_NOT_PRIME)
 			printf("p value is not prime\n");
-		if (i & DH_CHECK_P_NOT_STRONG_PRIME)
-			printf("p value is not a strong prime\n");
+		if (i & DH_CHECK_P_NOT_SAFE_PRIME)
+			printf("p value is not a safe prime\n");
 		if (i & DH_UNABLE_TO_CHECK_GENERATOR)
 			printf("unable to check the generator value\n");
 		if (i & DH_NOT_SUITABLE_GENERATOR)
@@ -248,10 +283,10 @@ bad:
 
 		len=BN_num_bytes(dh->p);
 		bits=BN_num_bits(dh->p);
-		data=(unsigned char *)Malloc(len);
+		data=(unsigned char *)OPENSSL_malloc(len);
 		if (data == NULL)
 			{
-			perror("Malloc");
+			perror("OPENSSL_malloc");
 			goto end;
 			}
 		l=BN_bn2bin(dh->p,data);
@@ -282,6 +317,7 @@ bad:
 		printf("\tif ((dh->p == NULL) || (dh->g == NULL))\n");
 		printf("\t\treturn(NULL);\n");
 		printf("\treturn(dh);\n\t}\n");
+		OPENSSL_free(data);
 		}
 
 
@@ -297,7 +333,7 @@ bad:
 			}
 		if (!i)
 			{
-			BIO_printf(bio_err,"unable to write DH paramaters\n");
+			BIO_printf(bio_err,"unable to write DH parameters\n");
 			ERR_print_errors(bio_err);
 			goto end;
 			}
@@ -305,8 +341,15 @@ bad:
 	ret=0;
 end:
 	if (in != NULL) BIO_free(in);
-	if (out != NULL) BIO_free(out);
+	if (out != NULL) BIO_free_all(out);
 	if (dh != NULL) DH_free(dh);
-	EXIT(ret);
+	apps_shutdown();
+	OPENSSL_EXIT(ret);
 	}
+#else /* !OPENSSL_NO_DH */
+
+# if PEDANTIC
+static void *dummy=&dummy;
+# endif
+
 #endif

apps/dh1024.pem

@@ -1,5 +1,10 @@
 -----BEGIN DH PARAMETERS-----
-MIGHAoGBAJf2QmHKtQXdKCjhPx1ottPb0PMTBH9A6FbaWMsTuKG/K3g6TG1Z1fkq
-/Gz/PWk/eLI9TzFgqVAuPvr3q14a1aZeVUMTgo2oO5/y2UHe6VaJ+trqCTat3xlx
-/mNbIK9HA2RgPC3gWfVLZQrY+gz3ASHHR5nXWHEyvpuZm7m3h+irAgEC
+MIGHAoGBAPSI/VhOSdvNILSd5JEHNmszbDgNRR0PfIizHHxbLY7288kjwEPwpVsY
+jY67VYy4XTjTNP18F1dDox0YbN4zISy1Kv884bEpQBgRjXyEpwpy1obEAxnIByl6
+ypUM2Zafq9AKUJsCRtMIPWakXUGfnHy9iUsiGSa6q6Jew1XpL3jHAgEC
 -----END DH PARAMETERS-----
+
+These are the 1024 bit DH parameters from "Assigned Number for SKIP Protocols"
+(http://www.skip-vpn.org/spec/numbers.html).
+See there for how they were generated.
+Note that g is not a generator, but this is not a problem since p is a safe prime.

apps/dh2048.pem

@@ -0,0 +1,12 @@
+-----BEGIN DH PARAMETERS-----
+MIIBCAKCAQEA9kJXtwh/CBdyorrWqULzBej5UxE5T7bxbrlLOCDaAadWoxTpj0BV
+89AHxstDqZSt90xkhkn4DIO9ZekX1KHTUPj1WV/cdlJPPT2N286Z4VeSWc39uK50
+T8X8dryDxUcwYc58yWb/Ffm7/ZFexwGq01uejaClcjrUGvC/RgBYK+X0iP1YTknb
+zSC0neSRBzZrM2w4DUUdD3yIsxx8Wy2O9vPJI8BD8KVbGI2Ou1WMuF040zT9fBdX
+Q6MdGGzeMyEstSr/POGxKUAYEY18hKcKctaGxAMZyAcpesqVDNmWn6vQClCbAkbT
+CD1mpF1Bn5x8vYlLIhkmuquiXsNV6TILOwIBAg==
+-----END DH PARAMETERS-----
+
+These are the 2048 bit DH parameters from "Assigned Number for SKIP Protocols"
+(http://www.skip-vpn.org/spec/numbers.html).
+See there for how they were generated.

apps/dh4096.pem

@@ -0,0 +1,18 @@
+-----BEGIN DH PARAMETERS-----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=
+-----END DH PARAMETERS-----
+
+These are the 4096 bit DH parameters from "Assigned Number for SKIP Protocols"
+(http://www.skip-vpn.org/spec/numbers.html).
+See there for how they were generated.
+Note that g is not a generator, but this is not a problem since p is a safe prime.

apps/dh512.pem

@@ -0,0 +1,9 @@
+-----BEGIN DH PARAMETERS-----
+MEYCQQD1Kv884bEpQBgRjXyEpwpy1obEAxnIByl6ypUM2Zafq9AKUJsCRtMIPWak
+XUGfnHy9iUsiGSa6q6Jew1XpKgVfAgEC
+-----END DH PARAMETERS-----
+
+These are the 512 bit DH parameters from "Assigned Number for SKIP Protocols"
+(http://www.skip-vpn.org/spec/numbers.html).
+See there for how they were generated.
+Note that g is not a generator, but this is not a problem since p is a safe prime.

apps/dhparam.c

@@ -0,0 +1,560 @@
+/* apps/dhparam.c */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+/* ====================================================================
+ * Copyright (c) 1998-2000 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+
+#include <openssl/opensslconf.h>	/* for OPENSSL_NO_DH */
+#ifndef OPENSSL_NO_DH
+#include <stdio.h>
+#include <stdlib.h>
+#include <time.h>
+#include <string.h>
+#include "apps.h"
+#include <openssl/bio.h>
+#include <openssl/err.h>
+#include <openssl/bn.h>
+#include <openssl/dh.h>
+#include <openssl/x509.h>
+#include <openssl/pem.h>
+
+#ifndef OPENSSL_NO_DSA
+#include <openssl/dsa.h>
+#endif
+
+#undef PROG
+#define PROG	dhparam_main
+
+#define DEFBITS	512
+
+/* -inform arg	- input format - default PEM (DER or PEM)
+ * -outform arg - output format - default PEM
+ * -in arg	- input file - default stdin
+ * -out arg	- output file - default stdout
+ * -dsaparam  - read or generate DSA parameters, convert to DH
+ * -check	- check the parameters are ok
+ * -noout
+ * -text
+ * -C
+ */
+
+static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb);
+
+int MAIN(int, char **);
+
+int MAIN(int argc, char **argv)
+	{
+	DH *dh=NULL;
+	int i,badops=0,text=0;
+#ifndef OPENSSL_NO_DSA
+	int dsaparam=0;
+#endif
+	BIO *in=NULL,*out=NULL;
+	int informat,outformat,check=0,noout=0,C=0,ret=1;
+	char *infile,*outfile,*prog;
+	char *inrand=NULL;
+#ifndef OPENSSL_NO_ENGINE
+	char *engine=NULL;
+#endif
+	int num = 0, g = 0;
+
+	apps_startup();
+
+	if (bio_err == NULL)
+		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
+			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
+
+	if (!load_config(bio_err, NULL))
+		goto end;
+
+	infile=NULL;
+	outfile=NULL;
+	informat=FORMAT_PEM;
+	outformat=FORMAT_PEM;
+
+	prog=argv[0];
+	argc--;
+	argv++;
+	while (argc >= 1)
+		{
+		if 	(strcmp(*argv,"-inform") == 0)
+			{
+			if (--argc < 1) goto bad;
+			informat=str2fmt(*(++argv));
+			}
+		else if (strcmp(*argv,"-outform") == 0)
+			{
+			if (--argc < 1) goto bad;
+			outformat=str2fmt(*(++argv));
+			}
+		else if (strcmp(*argv,"-in") == 0)
+			{
+			if (--argc < 1) goto bad;
+			infile= *(++argv);
+			}
+		else if (strcmp(*argv,"-out") == 0)
+			{
+			if (--argc < 1) goto bad;
+			outfile= *(++argv);
+			}
+#ifndef OPENSSL_NO_ENGINE
+		else if (strcmp(*argv,"-engine") == 0)
+			{
+			if (--argc < 1) goto bad;
+			engine= *(++argv);
+			}
+#endif
+		else if (strcmp(*argv,"-check") == 0)
+			check=1;
+		else if (strcmp(*argv,"-text") == 0)
+			text=1;
+#ifndef OPENSSL_NO_DSA
+		else if (strcmp(*argv,"-dsaparam") == 0)
+			dsaparam=1;
+#endif
+		else if (strcmp(*argv,"-C") == 0)
+			C=1;
+		else if (strcmp(*argv,"-noout") == 0)
+			noout=1;
+		else if (strcmp(*argv,"-2") == 0)
+			g=2;
+		else if (strcmp(*argv,"-5") == 0)
+			g=5;
+		else if (strcmp(*argv,"-rand") == 0)
+			{
+			if (--argc < 1) goto bad;
+			inrand= *(++argv);
+			}
+		else if (((sscanf(*argv,"%d",&num) == 0) || (num <= 0)))
+			goto bad;
+		argv++;
+		argc--;
+		}
+
+	if (badops)
+		{
+bad:
+		BIO_printf(bio_err,"%s [options] [numbits]\n",prog);
+		BIO_printf(bio_err,"where options are\n");
+		BIO_printf(bio_err," -inform arg   input format - one of DER PEM\n");
+		BIO_printf(bio_err," -outform arg  output format - one of DER PEM\n");
+		BIO_printf(bio_err," -in arg       input file\n");
+		BIO_printf(bio_err," -out arg      output file\n");
+#ifndef OPENSSL_NO_DSA
+		BIO_printf(bio_err," -dsaparam     read or generate DSA parameters, convert to DH\n");
+#endif
+		BIO_printf(bio_err," -check        check the DH parameters\n");
+		BIO_printf(bio_err," -text         print a text form of the DH parameters\n");
+		BIO_printf(bio_err," -C            Output C code\n");
+		BIO_printf(bio_err," -2            generate parameters using  2 as the generator value\n");
+		BIO_printf(bio_err," -5            generate parameters using  5 as the generator value\n");
+		BIO_printf(bio_err," numbits       number of bits in to generate (default 512)\n");
+#ifndef OPENSSL_NO_ENGINE
+		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
+#endif
+		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
+		BIO_printf(bio_err,"               - load the file (or the files in the directory) into\n");
+		BIO_printf(bio_err,"               the random number generator\n");
+		BIO_printf(bio_err," -noout        no output\n");
+		goto end;
+		}
+
+	ERR_load_crypto_strings();
+
+#ifndef OPENSSL_NO_ENGINE
+        setup_engine(bio_err, engine, 0);
+#endif
+
+	if (g && !num)
+		num = DEFBITS;
+
+#ifndef OPENSSL_NO_DSA
+	if (dsaparam)
+		{
+		if (g)
+			{
+			BIO_printf(bio_err, "generator may not be chosen for DSA parameters\n");
+			goto end;
+			}
+		}
+	else
+#endif
+		{
+		/* DH parameters */
+		if (num && !g)
+			g = 2;
+		}
+
+	if(num) {
+
+		BN_GENCB cb;
+		BN_GENCB_set(&cb, dh_cb, bio_err);
+		if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL)
+			{
+			BIO_printf(bio_err,"warning, not much extra random data, consider using the -rand option\n");
+			}
+		if (inrand != NULL)
+			BIO_printf(bio_err,"%ld semi-random bytes loaded\n",
+				app_RAND_load_files(inrand));
+
+#ifndef OPENSSL_NO_DSA
+		if (dsaparam)
+			{
+			DSA *dsa = DSA_new();
+			
+			BIO_printf(bio_err,"Generating DSA parameters, %d bit long prime\n",num);
+			if(!dsa || !DSA_generate_parameters_ex(dsa, num,
+						NULL, 0, NULL, NULL, &cb))
+				{
+				if(dsa) DSA_free(dsa);
+				ERR_print_errors(bio_err);
+				goto end;
+				}
+
+			dh = DSA_dup_DH(dsa);
+			DSA_free(dsa);
+			if (dh == NULL)
+				{
+				ERR_print_errors(bio_err);
+				goto end;
+				}
+			}
+		else
+#endif
+			{
+			dh = DH_new();
+			BIO_printf(bio_err,"Generating DH parameters, %d bit long safe prime, generator %d\n",num,g);
+			BIO_printf(bio_err,"This is going to take a long time\n");
+			if(!dh || !DH_generate_parameters_ex(dh, num, g, &cb))
+				{
+				if(dh) DH_free(dh);
+				ERR_print_errors(bio_err);
+				goto end;
+				}
+			}
+
+		app_RAND_write_file(NULL, bio_err);
+	} else {
+
+		in=BIO_new(BIO_s_file());
+		if (in == NULL)
+			{
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+		if (infile == NULL)
+			BIO_set_fp(in,stdin,BIO_NOCLOSE);
+		else
+			{
+			if (BIO_read_filename(in,infile) <= 0)
+				{
+				perror(infile);
+				goto end;
+				}
+			}
+
+		if	(informat != FORMAT_ASN1 && informat != FORMAT_PEM)
+			{
+			BIO_printf(bio_err,"bad input format specified\n");
+			goto end;
+			}
+
+#ifndef OPENSSL_NO_DSA
+		if (dsaparam)
+			{
+			DSA *dsa;
+			
+			if (informat == FORMAT_ASN1)
+				dsa=d2i_DSAparams_bio(in,NULL);
+			else /* informat == FORMAT_PEM */
+				dsa=PEM_read_bio_DSAparams(in,NULL,NULL,NULL);
+			
+			if (dsa == NULL)
+				{
+				BIO_printf(bio_err,"unable to load DSA parameters\n");
+				ERR_print_errors(bio_err);
+				goto end;
+				}
+			
+			dh = DSA_dup_DH(dsa);
+			DSA_free(dsa);
+			if (dh == NULL)
+				{
+				ERR_print_errors(bio_err);
+				goto end;
+				}
+			}
+		else
+#endif
+			{
+			if (informat == FORMAT_ASN1)
+				dh=d2i_DHparams_bio(in,NULL);
+			else /* informat == FORMAT_PEM */
+				dh=PEM_read_bio_DHparams(in,NULL,NULL,NULL);
+			
+			if (dh == NULL)
+				{
+				BIO_printf(bio_err,"unable to load DH parameters\n");
+				ERR_print_errors(bio_err);
+				goto end;
+				}
+			}
+		
+		/* dh != NULL */
+	}
+	
+	out=BIO_new(BIO_s_file());
+	if (out == NULL)
+		{
+		ERR_print_errors(bio_err);
+		goto end;
+		}
+	if (outfile == NULL)
+		{
+		BIO_set_fp(out,stdout,BIO_NOCLOSE);
+#ifdef OPENSSL_SYS_VMS
+		{
+		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+		out = BIO_push(tmpbio, out);
+		}
+#endif
+		}
+	else
+		{
+		if (BIO_write_filename(out,outfile) <= 0)
+			{
+			perror(outfile);
+			goto end;
+			}
+		}
+
+
+	if (text)
+		{
+		DHparams_print(out,dh);
+		}
+	
+	if (check)
+		{
+		if (!DH_check(dh,&i))
+			{
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+		if (i & DH_CHECK_P_NOT_PRIME)
+			printf("p value is not prime\n");
+		if (i & DH_CHECK_P_NOT_SAFE_PRIME)
+			printf("p value is not a safe prime\n");
+		if (i & DH_UNABLE_TO_CHECK_GENERATOR)
+			printf("unable to check the generator value\n");
+		if (i & DH_NOT_SUITABLE_GENERATOR)
+			printf("the g value is not a generator\n");
+		if (i == 0)
+			printf("DH parameters appear to be ok.\n");
+		}
+	if (C)
+		{
+		unsigned char *data;
+		int len,l,bits;
+
+		len=BN_num_bytes(dh->p);
+		bits=BN_num_bits(dh->p);
+		data=(unsigned char *)OPENSSL_malloc(len);
+		if (data == NULL)
+			{
+			perror("OPENSSL_malloc");
+			goto end;
+			}
+		printf("#ifndef HEADER_DH_H\n"
+		       "#include <openssl/dh.h>\n"
+		       "#endif\n");
+		printf("DH *get_dh%d()\n\t{\n",bits);
+
+		l=BN_bn2bin(dh->p,data);
+		printf("\tstatic unsigned char dh%d_p[]={",bits);
+		for (i=0; i<l; i++)
+			{
+			if ((i%12) == 0) printf("\n\t\t");
+			printf("0x%02X,",data[i]);
+			}
+		printf("\n\t\t};\n");
+
+		l=BN_bn2bin(dh->g,data);
+		printf("\tstatic unsigned char dh%d_g[]={",bits);
+		for (i=0; i<l; i++)
+			{
+			if ((i%12) == 0) printf("\n\t\t");
+			printf("0x%02X,",data[i]);
+			}
+		printf("\n\t\t};\n");
+
+		printf("\tDH *dh;\n\n");
+		printf("\tif ((dh=DH_new()) == NULL) return(NULL);\n");
+		printf("\tdh->p=BN_bin2bn(dh%d_p,sizeof(dh%d_p),NULL);\n",
+			bits,bits);
+		printf("\tdh->g=BN_bin2bn(dh%d_g,sizeof(dh%d_g),NULL);\n",
+			bits,bits);
+		printf("\tif ((dh->p == NULL) || (dh->g == NULL))\n");
+		printf("\t\t{ DH_free(dh); return(NULL); }\n");
+		if (dh->length)
+			printf("\tdh->length = %ld;\n", dh->length);
+		printf("\treturn(dh);\n\t}\n");
+		OPENSSL_free(data);
+		}
+
+
+	if (!noout)
+		{
+		if 	(outformat == FORMAT_ASN1)
+			i=i2d_DHparams_bio(out,dh);
+		else if (outformat == FORMAT_PEM)
+			i=PEM_write_bio_DHparams(out,dh);
+		else	{
+			BIO_printf(bio_err,"bad output format specified for outfile\n");
+			goto end;
+			}
+		if (!i)
+			{
+			BIO_printf(bio_err,"unable to write DH parameters\n");
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+		}
+	ret=0;
+end:
+	if (in != NULL) BIO_free(in);
+	if (out != NULL) BIO_free_all(out);
+	if (dh != NULL) DH_free(dh);
+	apps_shutdown();
+	OPENSSL_EXIT(ret);
+	}
+
+/* dh_cb is identical to dsa_cb in apps/dsaparam.c */
+static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb)
+	{
+	char c='*';
+
+	if (p == 0) c='.';
+	if (p == 1) c='+';
+	if (p == 2) c='*';
+	if (p == 3) c='\n';
+	BIO_write(cb->arg,&c,1);
+	(void)BIO_flush(cb->arg);
+#ifdef LINT
+	p=n;
+#endif
+	return 1;
+	}
+
+#else /* !OPENSSL_NO_DH */
+
+# if PEDANTIC
+static void *dummy=&dummy;
+# endif
+
+#endif

apps/dsa.c

@@ -56,7 +56,8 @@
  * [including the GNU Public Licence.]
  */
 
-#ifndef NO_DSA
+#include <openssl/opensslconf.h>	/* for OPENSSL_NO_DSA */
+#ifndef OPENSSL_NO_DSA
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -68,6 +69,7 @@
 #include <openssl/evp.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
+#include <openssl/bn.h>
 
 #undef PROG
 #define PROG	dsa_main
@@ -79,27 +81,51 @@
  * -des		- encrypt output if PEM format with DES in cbc mode
  * -des3	- encrypt output if PEM format
  * -idea	- encrypt output if PEM format
+ * -aes128	- encrypt output if PEM format
+ * -aes192	- encrypt output if PEM format
+ * -aes256	- encrypt output if PEM format
+ * -camellia128 - encrypt output if PEM format
+ * -camellia192 - encrypt output if PEM format
+ * -camellia256 - encrypt output if PEM format
+ * -seed        - encrypt output if PEM format
  * -text	- print a text version
  * -modulus	- print the DSA public key
  */
 
+int MAIN(int, char **);
+
 int MAIN(int argc, char **argv)
 	{
+	ENGINE *e = NULL;
 	int ret=1;
 	DSA *dsa=NULL;
 	int i,badops=0;
 	const EVP_CIPHER *enc=NULL;
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat,text=0,noout=0;
+	int pubin = 0, pubout = 0;
 	char *infile,*outfile,*prog;
+#ifndef OPENSSL_NO_ENGINE
+	char *engine;
+#endif
+	char *passargin = NULL, *passargout = NULL;
+	char *passin = NULL, *passout = NULL;
 	int modulus=0;
 
+	int pvk_encr = 2;
+
 	apps_startup();
 
 	if (bio_err == NULL)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
+	if (!load_config(bio_err, NULL))
+		goto end;
+
+#ifndef OPENSSL_NO_ENGINE
+	engine=NULL;
+#endif
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -130,12 +156,39 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outfile= *(++argv);
 			}
+		else if (strcmp(*argv,"-passin") == 0)
+			{
+			if (--argc < 1) goto bad;
+			passargin= *(++argv);
+			}
+		else if (strcmp(*argv,"-passout") == 0)
+			{
+			if (--argc < 1) goto bad;
+			passargout= *(++argv);
+			}
+#ifndef OPENSSL_NO_ENGINE
+		else if (strcmp(*argv,"-engine") == 0)
+			{
+			if (--argc < 1) goto bad;
+			engine= *(++argv);
+			}
+#endif
+		else if (strcmp(*argv,"-pvk-strong") == 0)
+			pvk_encr=2;
+		else if (strcmp(*argv,"-pvk-weak") == 0)
+			pvk_encr=1;
+		else if (strcmp(*argv,"-pvk-none") == 0)
+			pvk_encr=0;
 		else if (strcmp(*argv,"-noout") == 0)
 			noout=1;
 		else if (strcmp(*argv,"-text") == 0)
 			text=1;
 		else if (strcmp(*argv,"-modulus") == 0)
 			modulus=1;
+		else if (strcmp(*argv,"-pubin") == 0)
+			pubin=1;
+		else if (strcmp(*argv,"-pubout") == 0)
+			pubout=1;
 		else if ((enc=EVP_get_cipherbyname(&(argv[0][1]))) == NULL)
 			{
 			BIO_printf(bio_err,"unknown option %s\n",*argv);
@@ -151,23 +204,48 @@ int MAIN(int argc, char **argv)
 bad:
 		BIO_printf(bio_err,"%s [options] <infile >outfile\n",prog);
 		BIO_printf(bio_err,"where options are\n");
-		BIO_printf(bio_err," -inform arg   input format - one of DER NET PEM\n");
-		BIO_printf(bio_err," -outform arg  output format - one of DER NET PEM\n");
-		BIO_printf(bio_err," -in arg       input file\n");
-		BIO_printf(bio_err," -out arg      output file\n");
-		BIO_printf(bio_err," -des          encrypt PEM output with cbc des\n");
-		BIO_printf(bio_err," -des3         encrypt PEM output with ede cbc des using 168 bit key\n");
-#ifndef NO_IDEA
-		BIO_printf(bio_err," -idea         encrypt PEM output with cbc idea\n");
+		BIO_printf(bio_err," -inform arg     input format - DER or PEM\n");
+		BIO_printf(bio_err," -outform arg    output format - DER or PEM\n");
+		BIO_printf(bio_err," -in arg         input file\n");
+		BIO_printf(bio_err," -passin arg     input file pass phrase source\n");
+		BIO_printf(bio_err," -out arg        output file\n");
+		BIO_printf(bio_err," -passout arg    output file pass phrase source\n");
+#ifndef OPENSSL_NO_ENGINE
+		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
 #endif
-		BIO_printf(bio_err," -text         print the key in text\n");
-		BIO_printf(bio_err," -noout        don't print key out\n");
-		BIO_printf(bio_err," -modulus      print the DSA public value\n");
+		BIO_printf(bio_err," -des            encrypt PEM output with cbc des\n");
+		BIO_printf(bio_err," -des3           encrypt PEM output with ede cbc des using 168 bit key\n");
+#ifndef OPENSSL_NO_IDEA
+		BIO_printf(bio_err," -idea           encrypt PEM output with cbc idea\n");
+#endif
+#ifndef OPENSSL_NO_AES
+		BIO_printf(bio_err," -aes128, -aes192, -aes256\n");
+		BIO_printf(bio_err,"                 encrypt PEM output with cbc aes\n");
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+		BIO_printf(bio_err," -camellia128, -camellia192, -camellia256\n");
+		BIO_printf(bio_err,"                 encrypt PEM output with cbc camellia\n");
+#endif
+#ifndef OPENSSL_NO_SEED
+		BIO_printf(bio_err," -seed           encrypt PEM output with cbc seed\n");
+#endif
+		BIO_printf(bio_err," -text           print the key in text\n");
+		BIO_printf(bio_err," -noout          don't print key out\n");
+		BIO_printf(bio_err," -modulus        print the DSA public value\n");
 		goto end;
 		}
 
 	ERR_load_crypto_strings();
 
+#ifndef OPENSSL_NO_ENGINE
+        e = setup_engine(bio_err, engine, 0);
+#endif
+
+	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
+		BIO_printf(bio_err, "Error getting passwords\n");
+		goto end;
+	}
+
 	in=BIO_new(BIO_s_file());
 	out=BIO_new(BIO_s_file());
 	if ((in == NULL) || (out == NULL))
@@ -187,25 +265,41 @@ bad:
 			}
 		}
 
-	BIO_printf(bio_err,"read DSA private key\n");
-	if	(informat == FORMAT_ASN1)
-		dsa=d2i_DSAPrivateKey_bio(in,NULL);
-	else if (informat == FORMAT_PEM)
-		dsa=PEM_read_bio_DSAPrivateKey(in,NULL,NULL,NULL);
-	else
+	BIO_printf(bio_err,"read DSA key\n");
+
 		{
-		BIO_printf(bio_err,"bad input format specified for key\n");
-		goto end;
+		EVP_PKEY	*pkey;
+
+		if (pubin)
+			pkey = load_pubkey(bio_err, infile, informat, 1,
+				passin, e, "Public Key");
+		else
+			pkey = load_key(bio_err, infile, informat, 1,
+				passin, e, "Private Key");
+
+		if (pkey)
+			{
+			dsa = EVP_PKEY_get1_DSA(pkey);
+			EVP_PKEY_free(pkey);
+			}
 		}
 	if (dsa == NULL)
 		{
-		BIO_printf(bio_err,"unable to load Private Key\n");
+		BIO_printf(bio_err,"unable to load Key\n");
 		ERR_print_errors(bio_err);
 		goto end;
 		}
 
 	if (outfile == NULL)
+		{
 		BIO_set_fp(out,stdout,BIO_NOCLOSE);
+#ifdef OPENSSL_SYS_VMS
+		{
+		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+		out = BIO_push(tmpbio, out);
+		}
+#endif
+		}
 	else
 		{
 		if (BIO_write_filename(out,outfile) <= 0)
@@ -231,16 +325,33 @@ bad:
 		}
 
 	if (noout) goto end;
-	BIO_printf(bio_err,"writing DSA private key\n");
-	if 	(outformat == FORMAT_ASN1)
-		i=i2d_DSAPrivateKey_bio(out,dsa);
-	else if (outformat == FORMAT_PEM)
-		i=PEM_write_bio_DSAPrivateKey(out,dsa,enc,NULL,0,NULL,NULL);
-	else	{
+	BIO_printf(bio_err,"writing DSA key\n");
+	if 	(outformat == FORMAT_ASN1) {
+		if(pubin || pubout) i=i2d_DSA_PUBKEY_bio(out,dsa);
+		else i=i2d_DSAPrivateKey_bio(out,dsa);
+	} else if (outformat == FORMAT_PEM) {
+		if(pubin || pubout)
+			i=PEM_write_bio_DSA_PUBKEY(out,dsa);
+		else i=PEM_write_bio_DSAPrivateKey(out,dsa,enc,
+							NULL,0,NULL, passout);
+#if !defined(OPENSSL_NO_RSA) && !defined(OPENSSL_NO_RC4)
+	} else if (outformat == FORMAT_MSBLOB || outformat == FORMAT_PVK) {
+		EVP_PKEY *pk;
+		pk = EVP_PKEY_new();
+		EVP_PKEY_set1_DSA(pk, dsa);
+		if (outformat == FORMAT_PVK)
+			i = i2b_PVK_bio(out, pk, pvk_encr, 0, passout);
+		else if (pubin || pubout)
+			i = i2b_PublicKey_bio(out, pk);
+		else
+			i = i2b_PrivateKey_bio(out, pk);
+		EVP_PKEY_free(pk);
+#endif
+	} else {
 		BIO_printf(bio_err,"bad output format specified for outfile\n");
 		goto end;
 		}
-	if (!i)
+	if (i <= 0)
 		{
 		BIO_printf(bio_err,"unable to write private key\n");
 		ERR_print_errors(bio_err);
@@ -248,9 +359,18 @@ bad:
 	else
 		ret=0;
 end:
-	if (in != NULL) BIO_free(in);
-	if (out != NULL) BIO_free(out);
-	if (dsa != NULL) DSA_free(dsa);
-	EXIT(ret);
+	if(in != NULL) BIO_free(in);
+	if(out != NULL) BIO_free_all(out);
+	if(dsa != NULL) DSA_free(dsa);
+	if(passin) OPENSSL_free(passin);
+	if(passout) OPENSSL_free(passout);
+	apps_shutdown();
+	OPENSSL_EXIT(ret);
 	}
+#else /* !OPENSSL_NO_DSA */
+
+# if PEDANTIC
+static void *dummy=&dummy;
+# endif
+
 #endif

apps/dsaparam.c

@@ -56,7 +56,15 @@
  * [including the GNU Public Licence.]
  */
 
-#ifndef NO_DSA
+#include <openssl/opensslconf.h>	/* for OPENSSL_NO_DSA */
+/* Until the key-gen callbacks are modified to use newer prototypes, we allow
+ * deprecated functions for openssl-internal code */
+#ifdef OPENSSL_NO_DEPRECATED
+#undef OPENSSL_NO_DEPRECATED
+#endif
+
+#ifndef OPENSSL_NO_DSA
+#include <assert.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <time.h>
@@ -65,7 +73,6 @@
 #include <openssl/bio.h>
 #include <openssl/err.h>
 #include <openssl/bn.h>
-#include <openssl/rand.h>
 #include <openssl/dsa.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
@@ -73,7 +80,7 @@
 #undef PROG
 #define PROG	dsaparam_main
 
-/* -inform arg	- input format - default PEM (one of DER, TXT or PEM)
+/* -inform arg	- input format - default PEM (DER or PEM)
  * -outform arg - output format - default PEM
  * -in arg	- input file - default stdin
  * -out arg	- output file - default stdout
@@ -82,9 +89,26 @@
  * -C
  * -noout
  * -genkey
+ *  #ifdef GENCB_TEST
+ * -timebomb n  - interrupt keygen after <n> seconds
+ *  #endif
  */
 
-static void MS_CALLBACK dsa_cb(int p, int n, char *arg);
+#ifdef GENCB_TEST
+
+static int stop_keygen_flag = 0;
+
+static void timebomb_sigalarm(int foo)
+	{
+	stop_keygen_flag = 1;
+	}
+
+#endif
+
+static int MS_CALLBACK dsa_cb(int p, int n, BN_GENCB *cb);
+
+int MAIN(int, char **);
+
 int MAIN(int argc, char **argv)
 	{
 	DSA *dsa=NULL;
@@ -93,7 +117,13 @@ int MAIN(int argc, char **argv)
 	int informat,outformat,noout=0,C=0,ret=1;
 	char *infile,*outfile,*prog,*inrand=NULL;
 	int numbits= -1,num,genkey=0;
-	char buffer[200],*randfile=NULL;
+	int need_rand=0;
+#ifndef OPENSSL_NO_ENGINE
+	char *engine=NULL;
+#endif
+#ifdef GENCB_TEST
+	int timebomb=0;
+#endif
 
 	apps_startup();
 
@@ -101,6 +131,9 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
+	if (!load_config(bio_err, NULL))
+		goto end;
+
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -131,16 +164,34 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outfile= *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
+		else if(strcmp(*argv, "-engine") == 0)
+			{
+			if (--argc < 1) goto bad;
+			engine = *(++argv);
+			}
+#endif
+#ifdef GENCB_TEST
+		else if(strcmp(*argv, "-timebomb") == 0)
+			{
+			if (--argc < 1) goto bad;
+			timebomb = atoi(*(++argv));
+			}
+#endif
 		else if (strcmp(*argv,"-text") == 0)
 			text=1;
 		else if (strcmp(*argv,"-C") == 0)
 			C=1;
 		else if (strcmp(*argv,"-genkey") == 0)
+			{
 			genkey=1;
+			need_rand=1;
+			}
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
 			inrand= *(++argv);
+			need_rand=1;
 			}
 		else if (strcmp(*argv,"-noout") == 0)
 			noout=1;
@@ -148,6 +199,7 @@ int MAIN(int argc, char **argv)
 			{
 			/* generate a key */
 			numbits=num;
+			need_rand=1;
 			}
 		else
 			{
@@ -164,14 +216,21 @@ int MAIN(int argc, char **argv)
 bad:
 		BIO_printf(bio_err,"%s [options] [bits] <infile >outfile\n",prog);
 		BIO_printf(bio_err,"where options are\n");
-		BIO_printf(bio_err," -inform arg   input format - one of DER TXT PEM\n");
-		BIO_printf(bio_err," -outform arg  output format - one of DER TXT PEM\n");
+		BIO_printf(bio_err," -inform arg   input format - DER or PEM\n");
+		BIO_printf(bio_err," -outform arg  output format - DER or PEM\n");
 		BIO_printf(bio_err," -in arg       input file\n");
 		BIO_printf(bio_err," -out arg      output file\n");
-		BIO_printf(bio_err," -text         check the DSA parameters\n");
+		BIO_printf(bio_err," -text         print as text\n");
 		BIO_printf(bio_err," -C            Output C code\n");
 		BIO_printf(bio_err," -noout        no output\n");
+		BIO_printf(bio_err," -genkey       generate a DSA key\n");
 		BIO_printf(bio_err," -rand         files to use for random number input\n");
+#ifndef OPENSSL_NO_ENGINE
+		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
+#endif
+#ifdef GENCB_TEST
+		BIO_printf(bio_err," -timebomb n   interrupt keygen after <n> seconds\n");
+#endif
 		BIO_printf(bio_err," number        number of bits to use for generating private key\n");
 		goto end;
 		}
@@ -197,7 +256,15 @@ bad:
 			}
 		}
 	if (outfile == NULL)
+		{
 		BIO_set_fp(out,stdout,BIO_NOCLOSE);
+#ifdef OPENSSL_SYS_VMS
+		{
+		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+		out = BIO_push(tmpbio, out);
+		}
+#endif
+		}
 	else
 		{
 		if (BIO_write_filename(out,outfile) <= 0)
@@ -207,15 +274,61 @@ bad:
 			}
 		}
 
+#ifndef OPENSSL_NO_ENGINE
+        setup_engine(bio_err, engine, 0);
+#endif
+
+	if (need_rand)
+		{
+		app_RAND_load_file(NULL, bio_err, (inrand != NULL));
+		if (inrand != NULL)
+			BIO_printf(bio_err,"%ld semi-random bytes loaded\n",
+				app_RAND_load_files(inrand));
+		}
+
 	if (numbits > 0)
 		{
-		randfile=RAND_file_name(buffer,200);
-		RAND_load_file(randfile,1024L*1024L);
-
+		BN_GENCB cb;
+		BN_GENCB_set(&cb, dsa_cb, bio_err);
+		assert(need_rand);
+		dsa = DSA_new();
+		if(!dsa)
+			{
+			BIO_printf(bio_err,"Error allocating DSA object\n");
+			goto end;
+			}
 		BIO_printf(bio_err,"Generating DSA parameters, %d bit long prime\n",num);
 	        BIO_printf(bio_err,"This could take some time\n");
-	        dsa=DSA_generate_parameters(num,NULL,0,NULL,NULL,
-			dsa_cb,(char *)bio_err);
+#ifdef GENCB_TEST
+		if(timebomb > 0)
+	{
+		struct sigaction act;
+		act.sa_handler = timebomb_sigalarm;
+		act.sa_flags = 0;
+		BIO_printf(bio_err,"(though I'll stop it if not done within %d secs)\n",
+				timebomb);
+		if(sigaction(SIGALRM, &act, NULL) != 0)
+			{
+			BIO_printf(bio_err,"Error, couldn't set SIGALRM handler\n");
+			goto end;
+			}
+		alarm(timebomb);
+	}
+#endif
+	        if(!DSA_generate_parameters_ex(dsa,num,NULL,0,NULL,NULL, &cb))
+			{
+#ifdef GENCB_TEST
+			if(stop_keygen_flag)
+				{
+				BIO_printf(bio_err,"DSA key generation time-stopped\n");
+				/* This is an asked-for behaviour! */
+				ret = 0;
+				goto end;
+				}
+#endif
+			BIO_printf(bio_err,"Error, DSA key generation failed\n");
+			goto end;
+			}
 		}
 	else if	(informat == FORMAT_ASN1)
 		dsa=d2i_DSAparams_bio(in,NULL);
@@ -241,16 +354,14 @@ bad:
 	if (C)
 		{
 		unsigned char *data;
-		int l,len,bits_p,bits_q,bits_g;
+		int l,len,bits_p;
 
 		len=BN_num_bytes(dsa->p);
 		bits_p=BN_num_bits(dsa->p);
-		bits_q=BN_num_bits(dsa->q);
-		bits_g=BN_num_bits(dsa->g);
-		data=(unsigned char *)Malloc(len+20);
+		data=(unsigned char *)OPENSSL_malloc(len+20);
 		if (data == NULL)
 			{
-			perror("Malloc");
+			perror("OPENSSL_malloc");
 			goto end;
 			}
 		l=BN_bn2bin(dsa->p,data);
@@ -290,7 +401,7 @@ bad:
 		printf("\tdsa->g=BN_bin2bn(dsa%d_g,sizeof(dsa%d_g),NULL);\n",
 			bits_p,bits_p);
 		printf("\tif ((dsa->p == NULL) || (dsa->q == NULL) || (dsa->g == NULL))\n");
-		printf("\t\treturn(NULL);\n");
+		printf("\t\t{ DSA_free(dsa); return(NULL); }\n");
 		printf("\treturn(dsa);\n\t}\n");
 		}
 
@@ -307,7 +418,7 @@ bad:
 			}
 		if (!i)
 			{
-			BIO_printf(bio_err,"unable to write DSA paramaters\n");
+			BIO_printf(bio_err,"unable to write DSA parameters\n");
 			ERR_print_errors(bio_err);
 			goto end;
 			}
@@ -316,6 +427,7 @@ bad:
 		{
 		DSA *dsakey;
 
+		assert(need_rand);
 		if ((dsakey=DSAparams_dup(dsa)) == NULL) goto end;
 		if (!DSA_generate_key(dsakey)) goto end;
 		if 	(outformat == FORMAT_ASN1)
@@ -328,15 +440,18 @@ bad:
 			}
 		DSA_free(dsakey);
 		}
+	if (need_rand)
+		app_RAND_write_file(NULL, bio_err);
 	ret=0;
 end:
 	if (in != NULL) BIO_free(in);
-	if (out != NULL) BIO_free(out);
+	if (out != NULL) BIO_free_all(out);
 	if (dsa != NULL) DSA_free(dsa);
-	EXIT(ret);
+	apps_shutdown();
+	OPENSSL_EXIT(ret);
 	}
 
-static void MS_CALLBACK dsa_cb(int p, int n, char *arg)
+static int MS_CALLBACK dsa_cb(int p, int n, BN_GENCB *cb)
 	{
 	char c='*';
 
@@ -344,10 +459,21 @@ static void MS_CALLBACK dsa_cb(int p, int n, char *arg)
 	if (p == 1) c='+';
 	if (p == 2) c='*';
 	if (p == 3) c='\n';
-	BIO_write((BIO *)arg,&c,1);
-	(void)BIO_flush((BIO *)arg);
+	BIO_write(cb->arg,&c,1);
+	(void)BIO_flush(cb->arg);
 #ifdef LINT
 	p=n;
 #endif
-	}
+#ifdef GENCB_TEST
+	if(stop_keygen_flag)
+		return 0;
+#endif
+	return 1;
+	}
+#else /* !OPENSSL_NO_DSA */
+
+# if PEDANTIC
+static void *dummy=&dummy;
+# endif
+
 #endif

apps/ec.c

@@ -0,0 +1,406 @@
+/* apps/ec.c */
+/*
+ * Written by Nils Larsch for the OpenSSL project.
+ */
+/* ====================================================================
+ * Copyright (c) 1998-2005 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+
+#include <openssl/opensslconf.h>
+#ifndef OPENSSL_NO_EC
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "apps.h"
+#include <openssl/bio.h>
+#include <openssl/err.h>
+#include <openssl/evp.h>
+#include <openssl/pem.h>
+
+#undef PROG
+#define PROG	ec_main
+
+/* -inform arg    - input format - default PEM (one of DER, NET or PEM)
+ * -outform arg   - output format - default PEM
+ * -in arg        - input file - default stdin
+ * -out arg       - output file - default stdout
+ * -des           - encrypt output if PEM format with DES in cbc mode
+ * -text          - print a text version
+ * -param_out     - print the elliptic curve parameters
+ * -conv_form arg - specifies the point encoding form
+ * -param_enc arg - specifies the parameter encoding
+ */
+
+int MAIN(int, char **);
+
+int MAIN(int argc, char **argv)
+{
+	int 	ret = 1;
+	EC_KEY 	*eckey = NULL;
+	const EC_GROUP *group;
+	int 	i, badops = 0;
+	const EVP_CIPHER *enc = NULL;
+	BIO 	*in = NULL, *out = NULL;
+	int 	informat, outformat, text=0, noout=0;
+	int  	pubin = 0, pubout = 0, param_out = 0;
+	char 	*infile, *outfile, *prog, *engine;
+	char 	*passargin = NULL, *passargout = NULL;
+	char 	*passin = NULL, *passout = NULL;
+	point_conversion_form_t form = POINT_CONVERSION_UNCOMPRESSED;
+	int	new_form = 0;
+	int	asn1_flag = OPENSSL_EC_NAMED_CURVE;
+	int 	new_asn1_flag = 0;
+
+	apps_startup();
+
+	if (bio_err == NULL)
+		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
+			BIO_set_fp(bio_err, stderr, BIO_NOCLOSE|BIO_FP_TEXT);
+
+	if (!load_config(bio_err, NULL))
+		goto end;
+
+	engine = NULL;
+	infile = NULL;
+	outfile = NULL;
+	informat = FORMAT_PEM;
+	outformat = FORMAT_PEM;
+
+	prog = argv[0];
+	argc--;
+	argv++;
+	while (argc >= 1)
+		{
+		if (strcmp(*argv,"-inform") == 0)
+			{
+			if (--argc < 1) goto bad;
+			informat=str2fmt(*(++argv));
+			}
+		else if (strcmp(*argv,"-outform") == 0)
+			{
+			if (--argc < 1) goto bad;
+			outformat=str2fmt(*(++argv));
+			}
+		else if (strcmp(*argv,"-in") == 0)
+			{
+			if (--argc < 1) goto bad;
+			infile= *(++argv);
+			}
+		else if (strcmp(*argv,"-out") == 0)
+			{
+			if (--argc < 1) goto bad;
+			outfile= *(++argv);
+			}
+		else if (strcmp(*argv,"-passin") == 0)
+			{
+			if (--argc < 1) goto bad;
+			passargin= *(++argv);
+			}
+		else if (strcmp(*argv,"-passout") == 0)
+			{
+			if (--argc < 1) goto bad;
+			passargout= *(++argv);
+			}
+		else if (strcmp(*argv, "-engine") == 0)
+			{
+			if (--argc < 1) goto bad;
+			engine= *(++argv);
+			}
+		else if (strcmp(*argv, "-noout") == 0)
+			noout = 1;
+		else if (strcmp(*argv, "-text") == 0)
+			text = 1;
+		else if (strcmp(*argv, "-conv_form") == 0)
+			{
+			if (--argc < 1)
+				goto bad;
+			++argv;
+			new_form = 1;
+			if (strcmp(*argv, "compressed") == 0)
+				form = POINT_CONVERSION_COMPRESSED;
+			else if (strcmp(*argv, "uncompressed") == 0)
+				form = POINT_CONVERSION_UNCOMPRESSED;
+			else if (strcmp(*argv, "hybrid") == 0)
+				form = POINT_CONVERSION_HYBRID;
+			else
+				goto bad;
+			}
+		else if (strcmp(*argv, "-param_enc") == 0)
+			{
+			if (--argc < 1)
+				goto bad;
+			++argv;
+			new_asn1_flag = 1;
+			if (strcmp(*argv, "named_curve") == 0)
+				asn1_flag = OPENSSL_EC_NAMED_CURVE;
+			else if (strcmp(*argv, "explicit") == 0)
+				asn1_flag = 0;
+			else
+				goto bad;
+			}
+		else if (strcmp(*argv, "-param_out") == 0)
+			param_out = 1;
+		else if (strcmp(*argv, "-pubin") == 0)
+			pubin=1;
+		else if (strcmp(*argv, "-pubout") == 0)
+			pubout=1;
+		else if ((enc=EVP_get_cipherbyname(&(argv[0][1]))) == NULL)
+			{
+			BIO_printf(bio_err, "unknown option %s\n", *argv);
+			badops=1;
+			break;
+			}
+		argc--;
+		argv++;
+		}
+
+	if (badops)
+		{
+bad:
+		BIO_printf(bio_err, "%s [options] <infile >outfile\n", prog);
+		BIO_printf(bio_err, "where options are\n");
+		BIO_printf(bio_err, " -inform arg     input format - "
+				"DER or PEM\n");
+		BIO_printf(bio_err, " -outform arg    output format - "
+				"DER or PEM\n");
+		BIO_printf(bio_err, " -in arg         input file\n");
+		BIO_printf(bio_err, " -passin arg     input file pass "
+				"phrase source\n");
+		BIO_printf(bio_err, " -out arg        output file\n");
+		BIO_printf(bio_err, " -passout arg    output file pass "
+				"phrase source\n");
+		BIO_printf(bio_err, " -engine e       use engine e, "
+				"possibly a hardware device.\n");
+		BIO_printf(bio_err, " -des            encrypt PEM output, "
+				"instead of 'des' every other \n"
+				"                 cipher "
+				"supported by OpenSSL can be used\n");
+		BIO_printf(bio_err, " -text           print the key\n");
+		BIO_printf(bio_err, " -noout          don't print key out\n");
+		BIO_printf(bio_err, " -param_out      print the elliptic "
+				"curve parameters\n");
+		BIO_printf(bio_err, " -conv_form arg  specifies the "
+				"point conversion form \n");
+		BIO_printf(bio_err, "                 possible values:"
+				" compressed\n");
+		BIO_printf(bio_err, "                                 "
+				" uncompressed (default)\n");
+		BIO_printf(bio_err, "                                  "
+				" hybrid\n");
+		BIO_printf(bio_err, " -param_enc arg  specifies the way"
+				" the ec parameters are encoded\n");
+		BIO_printf(bio_err, "                 in the asn1 der "
+				"encoding\n");
+		BIO_printf(bio_err, "                 possible values:"
+				" named_curve (default)\n");
+		BIO_printf(bio_err,"                                  "
+				"explicit\n");
+		goto end;
+		}
+
+	ERR_load_crypto_strings();
+
+#ifndef OPENSSL_NO_ENGINE
+        setup_engine(bio_err, engine, 0);
+#endif
+
+	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) 
+		{
+		BIO_printf(bio_err, "Error getting passwords\n");
+		goto end;
+		}
+
+	in = BIO_new(BIO_s_file());
+	out = BIO_new(BIO_s_file());
+	if ((in == NULL) || (out == NULL))
+		{
+		ERR_print_errors(bio_err);
+		goto end;
+		}
+
+	if (infile == NULL)
+		BIO_set_fp(in, stdin, BIO_NOCLOSE);
+	else
+		{
+		if (BIO_read_filename(in, infile) <= 0)
+			{
+			perror(infile);
+			goto end;
+			}
+		}
+
+	BIO_printf(bio_err, "read EC key\n");
+	if (informat == FORMAT_ASN1) 
+		{
+		if (pubin) 
+			eckey = d2i_EC_PUBKEY_bio(in, NULL);
+		else 
+			eckey = d2i_ECPrivateKey_bio(in, NULL);
+		} 
+	else if (informat == FORMAT_PEM) 
+		{
+		if (pubin) 
+			eckey = PEM_read_bio_EC_PUBKEY(in, NULL, NULL, 
+				NULL);
+		else 
+			eckey = PEM_read_bio_ECPrivateKey(in, NULL, NULL,
+				passin);
+		} 
+	else
+		{
+		BIO_printf(bio_err, "bad input format specified for key\n");
+		goto end;
+		}
+	if (eckey == NULL)
+		{
+		BIO_printf(bio_err,"unable to load Key\n");
+		ERR_print_errors(bio_err);
+		goto end;
+		}
+
+	if (outfile == NULL)
+		{
+		BIO_set_fp(out, stdout, BIO_NOCLOSE);
+#ifdef OPENSSL_SYS_VMS
+			{
+			BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+			out = BIO_push(tmpbio, out);
+			}
+#endif
+		}
+	else
+		{
+		if (BIO_write_filename(out, outfile) <= 0)
+			{
+			perror(outfile);
+			goto end;
+			}
+		}
+
+	group = EC_KEY_get0_group(eckey);
+
+	if (new_form)
+		EC_KEY_set_conv_form(eckey, form);
+
+	if (new_asn1_flag)
+		EC_KEY_set_asn1_flag(eckey, asn1_flag);
+
+	if (text) 
+		if (!EC_KEY_print(out, eckey, 0))
+			{
+			perror(outfile);
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+
+	if (noout) 
+		{
+		ret = 0;
+		goto end;
+		}
+
+	BIO_printf(bio_err, "writing EC key\n");
+	if (outformat == FORMAT_ASN1) 
+		{
+		if (param_out)
+			i = i2d_ECPKParameters_bio(out, group);
+		else if (pubin || pubout) 
+			i = i2d_EC_PUBKEY_bio(out, eckey);
+		else 
+			i = i2d_ECPrivateKey_bio(out, eckey);
+		} 
+	else if (outformat == FORMAT_PEM) 
+		{
+		if (param_out)
+			i = PEM_write_bio_ECPKParameters(out, group);
+		else if (pubin || pubout)
+			i = PEM_write_bio_EC_PUBKEY(out, eckey);
+		else 
+			i = PEM_write_bio_ECPrivateKey(out, eckey, enc,
+						NULL, 0, NULL, passout);
+		} 
+	else 
+		{
+		BIO_printf(bio_err, "bad output format specified for "
+			"outfile\n");
+		goto end;
+		}
+
+	if (!i)
+		{
+		BIO_printf(bio_err, "unable to write private key\n");
+		ERR_print_errors(bio_err);
+		}
+	else
+		ret=0;
+end:
+	if (in)
+		BIO_free(in);
+	if (out)
+		BIO_free_all(out);
+	if (eckey)
+		EC_KEY_free(eckey);
+	if (passin)
+		OPENSSL_free(passin);
+	if (passout)
+		OPENSSL_free(passout);
+	apps_shutdown();
+	OPENSSL_EXIT(ret);
+}
+#else /* !OPENSSL_NO_EC */
+
+# if PEDANTIC
+static void *dummy=&dummy;
+# endif
+
+#endif

apps/ecparam.c

@@ -0,0 +1,731 @@
+/* apps/ecparam.c */
+/*
+ * Written by Nils Larsch for the OpenSSL project.
+ */
+/* ====================================================================
+ * Copyright (c) 1998-2005 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+/* ====================================================================
+ * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
+ *
+ * Portions of the attached software ("Contribution") are developed by 
+ * SUN MICROSYSTEMS, INC., and are contributed to the OpenSSL project.
+ *
+ * The Contribution is licensed pursuant to the OpenSSL open source
+ * license provided above.
+ *
+ * The elliptic curve binary polynomial software is originally written by 
+ * Sheueling Chang Shantz and Douglas Stebila of Sun Microsystems Laboratories.
+ *
+ */
+
+#include <openssl/opensslconf.h>
+#ifndef OPENSSL_NO_EC
+#include <assert.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <time.h>
+#include <string.h>
+#include "apps.h"
+#include <openssl/bio.h>
+#include <openssl/err.h>
+#include <openssl/bn.h>
+#include <openssl/ec.h>
+#include <openssl/x509.h>
+#include <openssl/pem.h>
+
+#undef PROG
+#define PROG	ecparam_main
+
+/* -inform arg      - input format - default PEM (DER or PEM)
+ * -outform arg     - output format - default PEM
+ * -in  arg         - input file  - default stdin
+ * -out arg         - output file - default stdout
+ * -noout           - do not print the ec parameter
+ * -text            - print the ec parameters in text form
+ * -check           - validate the ec parameters
+ * -C               - print a 'C' function creating the parameters
+ * -name arg        - use the ec parameters with 'short name' name
+ * -list_curves     - prints a list of all currently available curve 'short names'
+ * -conv_form arg   - specifies the point conversion form 
+ *                  - possible values: compressed
+ *                                     uncompressed (default)
+ *                                     hybrid
+ * -param_enc arg   - specifies the way the ec parameters are encoded
+ *                    in the asn1 der encoding
+ *                    possible values: named_curve (default)
+ *                                     explicit
+ * -no_seed         - if 'explicit' parameters are choosen do not use the seed
+ * -genkey          - generate ec key
+ * -rand file       - files to use for random number input
+ * -engine e        - use engine e, possibly a hardware device
+ */
+
+
+static int ecparam_print_var(BIO *,BIGNUM *,const char *,int,unsigned char *);
+
+int MAIN(int, char **);
+
+int MAIN(int argc, char **argv)
+	{
+	EC_GROUP *group = NULL;
+	point_conversion_form_t form = POINT_CONVERSION_UNCOMPRESSED; 
+	int 	new_form = 0;
+	int 	asn1_flag = OPENSSL_EC_NAMED_CURVE;
+	int 	new_asn1_flag = 0;
+	char 	*curve_name = NULL, *inrand = NULL;
+	int	list_curves = 0, no_seed = 0, check = 0,
+		badops = 0, text = 0, i, need_rand = 0, genkey = 0;
+	char	*infile = NULL, *outfile = NULL, *prog;
+	BIO 	*in = NULL, *out = NULL;
+	int 	informat, outformat, noout = 0, C = 0, ret = 1;
+	char	*engine = NULL;
+
+	BIGNUM	*ec_p = NULL, *ec_a = NULL, *ec_b = NULL,
+		*ec_gen = NULL, *ec_order = NULL, *ec_cofactor = NULL;
+	unsigned char *buffer = NULL;
+
+	apps_startup();
+
+	if (bio_err == NULL)
+		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
+			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
+
+	if (!load_config(bio_err, NULL))
+		goto end;
+
+	informat=FORMAT_PEM;
+	outformat=FORMAT_PEM;
+
+	prog=argv[0];
+	argc--;
+	argv++;
+	while (argc >= 1)
+		{
+		if 	(strcmp(*argv,"-inform") == 0)
+			{
+			if (--argc < 1) goto bad;
+			informat=str2fmt(*(++argv));
+			}
+		else if (strcmp(*argv,"-outform") == 0)
+			{
+			if (--argc < 1) goto bad;
+			outformat=str2fmt(*(++argv));
+			}
+		else if (strcmp(*argv,"-in") == 0)
+			{
+			if (--argc < 1) goto bad;
+			infile= *(++argv);
+			}
+		else if (strcmp(*argv,"-out") == 0)
+			{
+			if (--argc < 1) goto bad;
+			outfile= *(++argv);
+			}
+		else if (strcmp(*argv,"-text") == 0)
+			text = 1;
+		else if (strcmp(*argv,"-C") == 0)
+			C = 1;
+		else if (strcmp(*argv,"-check") == 0)
+			check = 1;
+		else if (strcmp (*argv, "-name") == 0)
+			{
+			if (--argc < 1)
+				goto bad;
+			curve_name = *(++argv);
+			}
+		else if (strcmp(*argv, "-list_curves") == 0)
+			list_curves = 1;
+		else if (strcmp(*argv, "-conv_form") == 0)
+			{
+			if (--argc < 1)
+				goto bad;
+			++argv;
+			new_form = 1;
+			if (strcmp(*argv, "compressed") == 0)
+				form = POINT_CONVERSION_COMPRESSED;
+			else if (strcmp(*argv, "uncompressed") == 0)
+				form = POINT_CONVERSION_UNCOMPRESSED;
+			else if (strcmp(*argv, "hybrid") == 0)
+				form = POINT_CONVERSION_HYBRID;
+			else
+				goto bad;
+			}
+		else if (strcmp(*argv, "-param_enc") == 0)
+			{
+			if (--argc < 1)
+				goto bad;
+			++argv;
+			new_asn1_flag = 1;
+			if (strcmp(*argv, "named_curve") == 0)
+				asn1_flag = OPENSSL_EC_NAMED_CURVE;
+			else if (strcmp(*argv, "explicit") == 0)
+				asn1_flag = 0;
+			else
+				goto bad;
+			}
+		else if (strcmp(*argv, "-no_seed") == 0)
+			no_seed = 1;
+		else if (strcmp(*argv, "-noout") == 0)
+			noout=1;
+		else if (strcmp(*argv,"-genkey") == 0)
+			{
+			genkey=1;
+			need_rand=1;
+			}
+		else if (strcmp(*argv, "-rand") == 0)
+			{
+			if (--argc < 1) goto bad;
+			inrand= *(++argv);
+			need_rand=1;
+			}
+		else if(strcmp(*argv, "-engine") == 0)
+			{
+			if (--argc < 1) goto bad;
+			engine = *(++argv);
+			}	
+		else
+			{
+			BIO_printf(bio_err,"unknown option %s\n",*argv);
+			badops=1;
+			break;
+			}
+		argc--;
+		argv++;
+		}
+
+	if (badops)
+		{
+bad:
+		BIO_printf(bio_err, "%s [options] <infile >outfile\n",prog);
+		BIO_printf(bio_err, "where options are\n");
+		BIO_printf(bio_err, " -inform arg       input format - "
+				"default PEM (DER or PEM)\n");
+		BIO_printf(bio_err, " -outform arg      output format - "
+				"default PEM\n");
+		BIO_printf(bio_err, " -in  arg          input file  - "
+				"default stdin\n");
+		BIO_printf(bio_err, " -out arg          output file - "
+				"default stdout\n");
+		BIO_printf(bio_err, " -noout            do not print the "
+				"ec parameter\n");
+		BIO_printf(bio_err, " -text             print the ec "
+				"parameters in text form\n");
+		BIO_printf(bio_err, " -check            validate the ec "
+				"parameters\n");
+		BIO_printf(bio_err, " -C                print a 'C' "
+				"function creating the parameters\n");
+		BIO_printf(bio_err, " -name arg         use the "
+				"ec parameters with 'short name' name\n");
+		BIO_printf(bio_err, " -list_curves      prints a list of "
+				"all currently available curve 'short names'\n");
+		BIO_printf(bio_err, " -conv_form arg    specifies the "
+				"point conversion form \n");
+		BIO_printf(bio_err, "                   possible values:"
+				" compressed\n");
+		BIO_printf(bio_err, "                                   "
+				" uncompressed (default)\n");
+		BIO_printf(bio_err, "                                   "
+				" hybrid\n");
+		BIO_printf(bio_err, " -param_enc arg    specifies the way"
+				" the ec parameters are encoded\n");
+		BIO_printf(bio_err, "                   in the asn1 der "
+				"encoding\n");
+		BIO_printf(bio_err, "                   possible values:"
+				" named_curve (default)\n");
+		BIO_printf(bio_err, "                                   "
+				" explicit\n");
+		BIO_printf(bio_err, " -no_seed          if 'explicit'"
+				" parameters are choosen do not"
+				" use the seed\n");
+		BIO_printf(bio_err, " -genkey           generate ec"
+				" key\n");
+		BIO_printf(bio_err, " -rand file        files to use for"
+				" random number input\n");
+		BIO_printf(bio_err, " -engine e         use engine e, "
+				"possibly a hardware device\n");
+		goto end;
+		}
+
+	ERR_load_crypto_strings();
+
+	in=BIO_new(BIO_s_file());
+	out=BIO_new(BIO_s_file());
+	if ((in == NULL) || (out == NULL))
+		{
+		ERR_print_errors(bio_err);
+		goto end;
+		}
+
+	if (infile == NULL)
+		BIO_set_fp(in,stdin,BIO_NOCLOSE);
+	else
+		{
+		if (BIO_read_filename(in,infile) <= 0)
+			{
+			perror(infile);
+			goto end;
+			}
+		}
+	if (outfile == NULL)
+		{
+		BIO_set_fp(out,stdout,BIO_NOCLOSE);
+#ifdef OPENSSL_SYS_VMS
+		{
+		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+		out = BIO_push(tmpbio, out);
+		}
+#endif
+		}
+	else
+		{
+		if (BIO_write_filename(out,outfile) <= 0)
+			{
+			perror(outfile);
+			goto end;
+			}
+		}
+
+#ifndef OPENSSL_NO_ENGINE
+	setup_engine(bio_err, engine, 0);
+#endif
+
+	if (list_curves)
+		{
+		EC_builtin_curve *curves = NULL;
+		size_t crv_len = 0;
+		size_t n = 0;
+
+		crv_len = EC_get_builtin_curves(NULL, 0);
+
+		curves = OPENSSL_malloc((int)(sizeof(EC_builtin_curve) * crv_len));
+
+		if (curves == NULL)
+			goto end;
+
+		if (!EC_get_builtin_curves(curves, crv_len))
+			{
+			OPENSSL_free(curves);
+			goto end;
+			}
+
+		
+		for (n = 0; n < crv_len; n++)
+			{
+			const char *comment;
+			const char *sname;
+			comment = curves[n].comment;
+			sname   = OBJ_nid2sn(curves[n].nid);
+			if (comment == NULL)
+				comment = "CURVE DESCRIPTION NOT AVAILABLE";
+			if (sname == NULL)
+				sname = "";
+
+			BIO_printf(out, "  %-10s: ", sname);
+			BIO_printf(out, "%s\n", comment);
+			} 
+
+		OPENSSL_free(curves);
+		ret = 0;
+		goto end;
+		}
+
+	if (curve_name != NULL)
+		{
+		int nid;
+
+		/* workaround for the SECG curve names secp192r1
+		 * and secp256r1 (which are the same as the curves
+		 * prime192v1 and prime256v1 defined in X9.62)
+		 */
+		if (!strcmp(curve_name, "secp192r1"))
+			{
+			BIO_printf(bio_err, "using curve name prime192v1 "
+				"instead of secp192r1\n");
+			nid = NID_X9_62_prime192v1;
+			}
+		else if (!strcmp(curve_name, "secp256r1"))
+			{
+			BIO_printf(bio_err, "using curve name prime256v1 "
+				"instead of secp256r1\n");
+			nid = NID_X9_62_prime256v1;
+			}
+		else
+			nid = OBJ_sn2nid(curve_name);
+	
+		if (nid == 0)
+			{
+			BIO_printf(bio_err, "unknown curve name (%s)\n", 
+				curve_name);
+			goto end;
+			}
+
+		group = EC_GROUP_new_by_curve_name(nid);
+		if (group == NULL)
+			{
+			BIO_printf(bio_err, "unable to create curve (%s)\n", 
+				curve_name);
+			goto end;
+			}
+		EC_GROUP_set_asn1_flag(group, asn1_flag);
+		EC_GROUP_set_point_conversion_form(group, form);
+		}
+	else if (informat == FORMAT_ASN1)
+		{
+		group = d2i_ECPKParameters_bio(in, NULL);
+		}
+	else if (informat == FORMAT_PEM)
+		{
+		group = PEM_read_bio_ECPKParameters(in,NULL,NULL,NULL);
+		}
+	else
+		{
+		BIO_printf(bio_err, "bad input format specified\n");
+		goto end;
+		}
+
+	if (group == NULL)
+		{
+		BIO_printf(bio_err, 
+			"unable to load elliptic curve parameters\n");
+		ERR_print_errors(bio_err);
+		goto end;
+		}
+
+	if (new_form)
+		EC_GROUP_set_point_conversion_form(group, form);
+
+	if (new_asn1_flag)
+		EC_GROUP_set_asn1_flag(group, asn1_flag);
+
+	if (no_seed)
+		{
+		EC_GROUP_set_seed(group, NULL, 0);
+		}
+
+	if (text)
+		{
+		if (!ECPKParameters_print(out, group, 0))
+			goto end;
+		}
+
+	if (check)
+		{
+		if (group == NULL)
+			BIO_printf(bio_err, "no elliptic curve parameters\n");
+		BIO_printf(bio_err, "checking elliptic curve parameters: ");
+		if (!EC_GROUP_check(group, NULL))
+			{
+			BIO_printf(bio_err, "failed\n");
+			ERR_print_errors(bio_err);
+			}
+		else
+			BIO_printf(bio_err, "ok\n");
+			
+		}
+
+	if (C)
+		{
+		size_t	buf_len = 0, tmp_len = 0;
+		const EC_POINT *point;
+		int	is_prime, len = 0;
+		const EC_METHOD *meth = EC_GROUP_method_of(group);
+
+		if ((ec_p = BN_new()) == NULL || (ec_a = BN_new()) == NULL ||
+		    (ec_b = BN_new()) == NULL || (ec_gen = BN_new()) == NULL ||
+		    (ec_order = BN_new()) == NULL || 
+		    (ec_cofactor = BN_new()) == NULL )
+			{
+			perror("OPENSSL_malloc");
+			goto end;
+			}
+
+		is_prime = (EC_METHOD_get_field_type(meth) == 
+			NID_X9_62_prime_field);
+
+		if (is_prime)
+			{
+			if (!EC_GROUP_get_curve_GFp(group, ec_p, ec_a,
+				ec_b, NULL))
+				goto end;
+			}
+		else
+			{
+			/* TODO */
+			goto end;
+			}
+
+		if ((point = EC_GROUP_get0_generator(group)) == NULL)
+			goto end;
+		if (!EC_POINT_point2bn(group, point, 
+			EC_GROUP_get_point_conversion_form(group), ec_gen, 
+			NULL))
+			goto end;
+		if (!EC_GROUP_get_order(group, ec_order, NULL))
+			goto end;
+		if (!EC_GROUP_get_cofactor(group, ec_cofactor, NULL))
+			goto end;
+
+		if (!ec_p || !ec_a || !ec_b || !ec_gen || 
+			!ec_order || !ec_cofactor)
+			goto end;
+
+		len = BN_num_bits(ec_order);
+
+		if ((tmp_len = (size_t)BN_num_bytes(ec_p)) > buf_len)
+			buf_len = tmp_len;
+		if ((tmp_len = (size_t)BN_num_bytes(ec_a)) > buf_len)
+			buf_len = tmp_len;
+		if ((tmp_len = (size_t)BN_num_bytes(ec_b)) > buf_len)
+			buf_len = tmp_len;
+		if ((tmp_len = (size_t)BN_num_bytes(ec_gen)) > buf_len)
+			buf_len = tmp_len;
+		if ((tmp_len = (size_t)BN_num_bytes(ec_order)) > buf_len)
+			buf_len = tmp_len;
+		if ((tmp_len = (size_t)BN_num_bytes(ec_cofactor)) > buf_len)
+			buf_len = tmp_len;
+
+		buffer = (unsigned char *)OPENSSL_malloc(buf_len);
+
+		if (buffer == NULL)
+			{
+			perror("OPENSSL_malloc");
+			goto end;
+			}
+
+		ecparam_print_var(out, ec_p, "ec_p", len, buffer);
+		ecparam_print_var(out, ec_a, "ec_a", len, buffer);
+		ecparam_print_var(out, ec_b, "ec_b", len, buffer);
+		ecparam_print_var(out, ec_gen, "ec_gen", len, buffer);
+		ecparam_print_var(out, ec_order, "ec_order", len, buffer);
+		ecparam_print_var(out, ec_cofactor, "ec_cofactor", len, 
+			buffer);
+
+		BIO_printf(out, "\n\n");
+
+		BIO_printf(out, "EC_GROUP *get_ec_group_%d(void)\n\t{\n", len);
+		BIO_printf(out, "\tint ok=0;\n");
+		BIO_printf(out, "\tEC_GROUP *group = NULL;\n");
+		BIO_printf(out, "\tEC_POINT *point = NULL;\n");
+		BIO_printf(out, "\tBIGNUM   *tmp_1 = NULL, *tmp_2 = NULL, "
+				"*tmp_3 = NULL;\n\n");
+		BIO_printf(out, "\tif ((tmp_1 = BN_bin2bn(ec_p_%d, "
+				"sizeof(ec_p_%d), NULL)) == NULL)\n\t\t"
+				"goto err;\n", len, len);
+		BIO_printf(out, "\tif ((tmp_2 = BN_bin2bn(ec_a_%d, "
+				"sizeof(ec_a_%d), NULL)) == NULL)\n\t\t"
+				"goto err;\n", len, len);
+		BIO_printf(out, "\tif ((tmp_3 = BN_bin2bn(ec_b_%d, "
+				"sizeof(ec_b_%d), NULL)) == NULL)\n\t\t"
+				"goto err;\n", len, len);
+		if (is_prime)
+			{
+			BIO_printf(out, "\tif ((group = EC_GROUP_new_curve_"
+				"GFp(tmp_1, tmp_2, tmp_3, NULL)) == NULL)"
+				"\n\t\tgoto err;\n\n");
+			}
+		else
+			{
+			/* TODO */
+			goto end;
+			}
+		BIO_printf(out, "\t/* build generator */\n");
+		BIO_printf(out, "\tif ((tmp_1 = BN_bin2bn(ec_gen_%d, "
+				"sizeof(ec_gen_%d), tmp_1)) == NULL)"
+				"\n\t\tgoto err;\n", len, len);
+		BIO_printf(out, "\tpoint = EC_POINT_bn2point(group, tmp_1, "
+				"NULL, NULL);\n");
+		BIO_printf(out, "\tif (point == NULL)\n\t\tgoto err;\n");
+		BIO_printf(out, "\tif ((tmp_2 = BN_bin2bn(ec_order_%d, "
+				"sizeof(ec_order_%d), tmp_2)) == NULL)"
+				"\n\t\tgoto err;\n", len, len);
+		BIO_printf(out, "\tif ((tmp_3 = BN_bin2bn(ec_cofactor_%d, "
+				"sizeof(ec_cofactor_%d), tmp_3)) == NULL)"
+				"\n\t\tgoto err;\n", len, len);
+		BIO_printf(out, "\tif (!EC_GROUP_set_generator(group, point,"
+				" tmp_2, tmp_3))\n\t\tgoto err;\n");
+		BIO_printf(out, "\n\tok=1;\n");
+		BIO_printf(out, "err:\n");
+		BIO_printf(out, "\tif (tmp_1)\n\t\tBN_free(tmp_1);\n");
+		BIO_printf(out, "\tif (tmp_2)\n\t\tBN_free(tmp_2);\n");
+		BIO_printf(out, "\tif (tmp_3)\n\t\tBN_free(tmp_3);\n");
+		BIO_printf(out, "\tif (point)\n\t\tEC_POINT_free(point);\n");
+		BIO_printf(out, "\tif (!ok)\n");
+		BIO_printf(out, "\t\t{\n");
+		BIO_printf(out, "\t\tEC_GROUP_free(group);\n");
+		BIO_printf(out, "\t\tgroup = NULL;\n");
+		BIO_printf(out, "\t\t}\n");
+		BIO_printf(out, "\treturn(group);\n\t}\n");
+	}
+
+	if (!noout)
+		{
+		if (outformat == FORMAT_ASN1)
+			i = i2d_ECPKParameters_bio(out, group);
+		else if (outformat == FORMAT_PEM)
+			i = PEM_write_bio_ECPKParameters(out, group);
+		else	
+			{
+			BIO_printf(bio_err,"bad output format specified for"
+				" outfile\n");
+			goto end;
+			}
+		if (!i)
+			{
+			BIO_printf(bio_err, "unable to write elliptic "
+				"curve parameters\n");
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+		}
+	
+	if (need_rand)
+		{
+		app_RAND_load_file(NULL, bio_err, (inrand != NULL));
+		if (inrand != NULL)
+			BIO_printf(bio_err,"%ld semi-random bytes loaded\n",
+				app_RAND_load_files(inrand));
+		}
+
+	if (genkey)
+		{
+		EC_KEY *eckey = EC_KEY_new();
+
+		if (eckey == NULL)
+			goto end;
+
+		assert(need_rand);
+
+		if (EC_KEY_set_group(eckey, group) == 0)
+			goto end;
+		
+		if (!EC_KEY_generate_key(eckey))
+			{
+			EC_KEY_free(eckey);
+			goto end;
+			}
+		if (outformat == FORMAT_ASN1)
+			i = i2d_ECPrivateKey_bio(out, eckey);
+		else if (outformat == FORMAT_PEM)
+			i = PEM_write_bio_ECPrivateKey(out, eckey, NULL,
+				NULL, 0, NULL, NULL);
+		else	
+			{
+			BIO_printf(bio_err, "bad output format specified "
+				"for outfile\n");
+			EC_KEY_free(eckey);
+			goto end;
+			}
+		EC_KEY_free(eckey);
+		}
+
+	if (need_rand)
+		app_RAND_write_file(NULL, bio_err);
+
+	ret=0;
+end:
+	if (ec_p)
+		BN_free(ec_p);
+	if (ec_a)
+		BN_free(ec_a);
+	if (ec_b)
+		BN_free(ec_b);
+	if (ec_gen)
+		BN_free(ec_gen);
+	if (ec_order)
+		BN_free(ec_order);
+	if (ec_cofactor)
+		BN_free(ec_cofactor);
+	if (buffer)
+		OPENSSL_free(buffer);
+	if (in != NULL)
+		BIO_free(in);
+	if (out != NULL)
+		BIO_free_all(out);
+	if (group != NULL)
+		EC_GROUP_free(group);
+	apps_shutdown();
+	OPENSSL_EXIT(ret);
+}
+
+static int ecparam_print_var(BIO *out, BIGNUM *in, const char *var,
+	int len, unsigned char *buffer)
+	{
+	BIO_printf(out, "static unsigned char %s_%d[] = {", var, len);
+	if (BN_is_zero(in))
+		BIO_printf(out, "\n\t0x00");
+	else 
+		{
+		int i, l;
+
+		l = BN_bn2bin(in, buffer);
+		for (i=0; i<l-1; i++)
+			{
+			if ((i%12) == 0) 
+				BIO_printf(out, "\n\t");
+			BIO_printf(out, "0x%02X,", buffer[i]);
+			}
+		if ((i%12) == 0) 
+			BIO_printf(out, "\n\t");
+		BIO_printf(out, "0x%02X", buffer[i]);
+		}
+	BIO_printf(out, "\n\t};\n\n");
+	return 1;
+	}
+#else /* !OPENSSL_NO_EC */
+
+# if PEDANTIC
+static void *dummy=&dummy;
+# endif
+
+#endif

apps/enc.c

@@ -65,10 +65,10 @@
 #include <openssl/evp.h>
 #include <openssl/objects.h>
 #include <openssl/x509.h>
-#ifndef NO_MD5
-#include <openssl/md5.h>
-#endif
+#include <openssl/rand.h>
 #include <openssl/pem.h>
+#include <openssl/comp.h>
+#include <ctype.h>
 
 int set_hex(char *in,unsigned char *out,int size);
 #undef SIZE
@@ -79,22 +79,56 @@ int set_hex(char *in,unsigned char *out,int size);
 #define BSIZE	(8*1024)
 #define	PROG	enc_main
 
+static void show_ciphers(const OBJ_NAME *name,void *bio_)
+	{
+	BIO *bio=bio_;
+	static int n;
+
+	if(!islower((unsigned char)*name->name))
+		return;
+
+	BIO_printf(bio,"-%-25s",name->name);
+	if(++n == 3)
+		{
+		BIO_printf(bio,"\n");
+		n=0;
+		}
+	else
+		BIO_printf(bio," ");
+	}
+
+int MAIN(int, char **);
+
 int MAIN(int argc, char **argv)
 	{
+	static const char magic[]="Salted__";
+	char mbuf[sizeof magic-1];
 	char *strbuf=NULL;
 	unsigned char *buff=NULL,*bufsize=NULL;
 	int bsize=BSIZE,verbose=0;
 	int ret=1,inl;
-	unsigned char key[24],iv[MD5_DIGEST_LENGTH];
-	char *str=NULL;
-	char *hkey=NULL,*hiv=NULL;
+	int nopad = 0;
+	unsigned char key[EVP_MAX_KEY_LENGTH],iv[EVP_MAX_IV_LENGTH];
+	unsigned char salt[PKCS5_SALT_LEN];
+	char *str=NULL, *passarg = NULL, *pass = NULL;
+	char *hkey=NULL,*hiv=NULL,*hsalt = NULL;
+	char *md=NULL;
 	int enc=1,printkey=0,i,base64=0;
-	int debug=0,olb64=0;
+#ifdef ZLIB
+	int do_zlib=0;
+	BIO *bzl = NULL;
+#endif
+	int debug=0,olb64=0,nosalt=0;
 	const EVP_CIPHER *cipher=NULL,*c;
+	EVP_CIPHER_CTX *ctx = NULL;
 	char *inf=NULL,*outf=NULL;
 	BIO *in=NULL,*out=NULL,*b64=NULL,*benc=NULL,*rbio=NULL,*wbio=NULL;
-#define PROG_NAME_SIZE  16
-	char pname[PROG_NAME_SIZE];
+#define PROG_NAME_SIZE  39
+	char pname[PROG_NAME_SIZE+1];
+#ifndef OPENSSL_NO_ENGINE
+	char *engine = NULL;
+#endif
+	const EVP_MD *dgst=NULL;
 
 	apps_startup();
 
@@ -102,13 +136,25 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
+	if (!load_config(bio_err, NULL))
+		goto end;
+
 	/* first check the program name */
-	program_name(argv[0],pname,PROG_NAME_SIZE);
+	program_name(argv[0],pname,sizeof pname);
 	if (strcmp(pname,"base64") == 0)
 		base64=1;
+#ifdef ZLIB
+	if (strcmp(pname,"zlib") == 0)
+		do_zlib=1;
+#endif
 
 	cipher=EVP_get_cipherbyname(pname);
+#ifdef ZLIB
+	if (!do_zlib && !base64 && (cipher == NULL)
+				&& (strcmp(pname,"enc") != 0))
+#else
 	if (!base64 && (cipher == NULL) && (strcmp(pname,"enc") != 0))
+#endif
 		{
 		BIO_printf(bio_err,"%s is an unknown cipher\n",pname);
 		goto bad;
@@ -130,14 +176,31 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outf= *(++argv);
 			}
+		else if (strcmp(*argv,"-pass") == 0)
+			{
+			if (--argc < 1) goto bad;
+			passarg= *(++argv);
+			}
+#ifndef OPENSSL_NO_ENGINE
+		else if (strcmp(*argv,"-engine") == 0)
+			{
+			if (--argc < 1) goto bad;
+			engine= *(++argv);
+			}
+#endif
 		else if	(strcmp(*argv,"-d") == 0)
 			enc=0;
 		else if	(strcmp(*argv,"-p") == 0)
 			printkey=1;
 		else if	(strcmp(*argv,"-v") == 0)
 			verbose=1;
-		else if	((strcmp(*argv,"-debug") == 0) ||
-			 (strcmp(*argv,"-d") == 0))
+		else if	(strcmp(*argv,"-nopad") == 0)
+			nopad=1;
+		else if	(strcmp(*argv,"-salt") == 0)
+			nosalt=0;
+		else if	(strcmp(*argv,"-nosalt") == 0)
+			nosalt=1;
+		else if	(strcmp(*argv,"-debug") == 0)
 			debug=1;
 		else if	(strcmp(*argv,"-P") == 0)
 			printkey=2;
@@ -147,6 +210,10 @@ int MAIN(int argc, char **argv)
 			base64=1;
 		else if	(strcmp(*argv,"-base64") == 0)
 			base64=1;
+#ifdef ZLIB
+		else if	(strcmp(*argv,"-z") == 0)
+			do_zlib=1;
+#endif
 		else if (strcmp(*argv,"-bufsize") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -173,7 +240,12 @@ int MAIN(int argc, char **argv)
 				goto bad;
 				}
 			buf[0]='\0';
-			fgets(buf,128,infile);
+			if (!fgets(buf,sizeof buf,infile))
+				{
+				BIO_printf(bio_err,"unable to read key from '%s'\n",
+					file);
+				goto bad;
+				}
 			fclose(infile);
 			i=strlen(buf);
 			if ((i > 0) &&
@@ -194,11 +266,21 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			hkey= *(++argv);
 			}
+		else if (strcmp(*argv,"-S") == 0)
+			{
+			if (--argc < 1) goto bad;
+			hsalt= *(++argv);
+			}
 		else if (strcmp(*argv,"-iv") == 0)
 			{
 			if (--argc < 1) goto bad;
 			hiv= *(++argv);
 			}
+		else if (strcmp(*argv,"-md") == 0)
+			{
+			if (--argc < 1) goto bad;
+			md= *(++argv);
+			}
 		else if	((argv[0][0] == '-') &&
 			((c=EVP_get_cipherbyname(&(argv[0][1]))) != NULL))
 			{
@@ -212,88 +294,51 @@ int MAIN(int argc, char **argv)
 bad:
 			BIO_printf(bio_err,"options are\n");
 			BIO_printf(bio_err,"%-14s input file\n","-in <file>");
-			BIO_printf(bio_err,"%-14s output fileencrypt\n","-out <file>");
+			BIO_printf(bio_err,"%-14s output file\n","-out <file>");
+			BIO_printf(bio_err,"%-14s pass phrase source\n","-pass <arg>");
 			BIO_printf(bio_err,"%-14s encrypt\n","-e");
 			BIO_printf(bio_err,"%-14s decrypt\n","-d");
 			BIO_printf(bio_err,"%-14s base64 encode/decode, depending on encryption flag\n","-a/-base64");
-			BIO_printf(bio_err,"%-14s key is the next argument\n","-k");
-			BIO_printf(bio_err,"%-14s key is the first line of the file argument\n","-kfile");
+			BIO_printf(bio_err,"%-14s passphrase is the next argument\n","-k");
+			BIO_printf(bio_err,"%-14s passphrase is the first line of the file argument\n","-kfile");
+			BIO_printf(bio_err,"%-14s the next argument is the md to use to create a key\n","-md");
+			BIO_printf(bio_err,"%-14s   from a passphrase.  One of md2, md5, sha or sha1\n","");
+			BIO_printf(bio_err,"%-14s salt in hex is the next argument\n","-S");
 			BIO_printf(bio_err,"%-14s key/iv in hex is the next argument\n","-K/-iv");
 			BIO_printf(bio_err,"%-14s print the iv/key (then exit if -P)\n","-[pP]");
 			BIO_printf(bio_err,"%-14s buffer size\n","-bufsize <n>");
+			BIO_printf(bio_err,"%-14s disable standard block padding\n","-nopad");
+#ifndef OPENSSL_NO_ENGINE
+			BIO_printf(bio_err,"%-14s use engine e, possibly a hardware device.\n","-engine e");
+#endif
 
 			BIO_printf(bio_err,"Cipher Types\n");
-			BIO_printf(bio_err,"des     : 56 bit key DES encryption\n");
-			BIO_printf(bio_err,"des_ede :112 bit key ede DES encryption\n");
-			BIO_printf(bio_err,"des_ede3:168 bit key ede DES encryption\n");
-#ifndef NO_IDEA
-			BIO_printf(bio_err,"idea    :128 bit key IDEA encryption\n");
-#endif
-#ifndef NO_RC4
-			BIO_printf(bio_err,"rc2     :128 bit key RC2 encryption\n");
-#endif
-#ifndef NO_BF
-			BIO_printf(bio_err,"bf      :128 bit key BlowFish encryption\n");
-#endif
-#ifndef NO_RC4
-			BIO_printf(bio_err," -%-5s :128 bit key RC4 encryption\n",
-				LN_rc4);
-#endif
+			OBJ_NAME_do_all_sorted(OBJ_NAME_TYPE_CIPHER_METH,
+					       show_ciphers,
+					       bio_err);
+			BIO_printf(bio_err,"\n");
 
-			BIO_printf(bio_err," -%-12s -%-12s -%-12s -%-12s",
-				LN_des_ecb,LN_des_cbc,
-				LN_des_cfb64,LN_des_ofb64);
-			BIO_printf(bio_err," -%-4s (%s)\n",
-				"des", LN_des_cbc);
-
-			BIO_printf(bio_err," -%-12s -%-12s -%-12s -%-12s",
-				LN_des_ede,LN_des_ede_cbc,
-				LN_des_ede_cfb64,LN_des_ede_ofb64);
-			BIO_printf(bio_err," -desx -none\n");
-
-
-			BIO_printf(bio_err," -%-12s -%-12s -%-12s -%-12s",
-				LN_des_ede3,LN_des_ede3_cbc,
-				LN_des_ede3_cfb64,LN_des_ede3_ofb64);
-			BIO_printf(bio_err," -%-4s (%s)\n",
-				"des3", LN_des_ede3_cbc);
-
-#ifndef NO_IDEA
-			BIO_printf(bio_err," -%-12s -%-12s -%-12s -%-12s",
-				LN_idea_ecb, LN_idea_cbc,
-				LN_idea_cfb64, LN_idea_ofb64);
-			BIO_printf(bio_err," -%-4s (%s)\n","idea",LN_idea_cbc);
-#endif
-#ifndef NO_RC2
-			BIO_printf(bio_err," -%-12s -%-12s -%-12s -%-12s",
-				LN_rc2_ecb, LN_rc2_cbc,
-				LN_rc2_cfb64, LN_rc2_ofb64);
-			BIO_printf(bio_err," -%-4s (%s)\n","rc2", LN_rc2_cbc);
-#endif
-#ifndef NO_BF
-			BIO_printf(bio_err," -%-12s -%-12s -%-12s -%-12s",
-				LN_bf_ecb, LN_bf_cbc,
-				LN_bf_cfb64, LN_bf_ofb64);
-			BIO_printf(bio_err," -%-4s (%s)\n","bf", LN_bf_cbc);
-#endif
-#ifndef NO_CAST
-			BIO_printf(bio_err," -%-12s -%-12s -%-12s -%-12s",
-				LN_cast5_ecb, LN_cast5_cbc,
-				LN_cast5_cfb64, LN_cast5_ofb64);
-			BIO_printf(bio_err," -%-4s (%s)\n","cast", LN_cast5_cbc);
-#endif
-#ifndef NO_RC5
-			BIO_printf(bio_err," -%-12s -%-12s -%-12s -%-12s",
-				LN_rc5_ecb, LN_rc5_cbc,
-				LN_rc5_cfb64, LN_rc5_ofb64);
-			BIO_printf(bio_err," -%-4s (%s)\n","rc5", LN_rc5_cbc);
-#endif
 			goto end;
 			}
 		argc--;
 		argv++;
 		}
 
+#ifndef OPENSSL_NO_ENGINE
+        setup_engine(bio_err, engine, 0);
+#endif
+
+	if (md && (dgst=EVP_get_digestbyname(md)) == NULL)
+		{
+		BIO_printf(bio_err,"%s is an unsupported message digest type\n",md);
+		goto end;
+		}
+
+	if (dgst == NULL)
+		{
+		dgst = EVP_md5();
+		}
+
 	if (bufsize != NULL)
 		{
 		unsigned long n;
@@ -317,17 +362,17 @@ bad:
 			}
 
 		/* It must be large enough for a base64 encoded line */
-		if (n < 80) n=80;
+		if (base64 && n < 80) n=80;
 
 		bsize=(int)n;
 		if (verbose) BIO_printf(bio_err,"bufsize=%d\n",bsize);
 		}
 
-	strbuf=Malloc(SIZE);
-	buff=(unsigned char *)Malloc(EVP_ENCODE_LENGTH(bsize));
+	strbuf=OPENSSL_malloc(SIZE);
+	buff=(unsigned char *)OPENSSL_malloc(EVP_ENCODE_LENGTH(bsize));
 	if ((buff == NULL) || (strbuf == NULL))
 		{
-		BIO_printf(bio_err,"Malloc failure %ld\n",(long)EVP_ENCODE_LENGTH(bsize));
+		BIO_printf(bio_err,"OPENSSL_malloc failure %ld\n",(long)EVP_ENCODE_LENGTH(bsize));
 		goto end;
 		}
 
@@ -342,12 +387,18 @@ bad:
 		{
 		BIO_set_callback(in,BIO_debug_callback);
 		BIO_set_callback(out,BIO_debug_callback);
-		BIO_set_callback_arg(in,bio_err);
-		BIO_set_callback_arg(out,bio_err);
+		BIO_set_callback_arg(in,(char *)bio_err);
+		BIO_set_callback_arg(out,(char *)bio_err);
 		}
 
 	if (inf == NULL)
+	        {
+#ifndef OPENSSL_NO_SETVBUF_IONBF
+		if (bufsize != NULL)
+			setvbuf(stdin, (char *)NULL, _IONBF, 0);
+#endif /* ndef OPENSSL_NO_SETVBUF_IONBF */
 		BIO_set_fp(in,stdin,BIO_NOCLOSE);
+	        }
 	else
 		{
 		if (BIO_read_filename(in,inf) <= 0)
@@ -357,15 +408,23 @@ bad:
 			}
 		}
 
+	if(!str && passarg) {
+		if(!app_passwd(bio_err, passarg, NULL, &pass, NULL)) {
+			BIO_printf(bio_err, "Error getting password\n");
+			goto end;
+		}
+		str = pass;
+	}
+
 	if ((str == NULL) && (cipher != NULL) && (hkey == NULL))
 		{
 		for (;;)
 			{
 			char buf[200];
 
-			sprintf(buf,"enter %s %s password:",
-				OBJ_nid2ln(EVP_CIPHER_nid(cipher)),
-				(enc)?"encryption":"decryption");
+			BIO_snprintf(buf,sizeof buf,"enter %s %s password:",
+				     OBJ_nid2ln(EVP_CIPHER_nid(cipher)),
+				     (enc)?"encryption":"decryption");
 			strbuf[0]='\0';
 			i=EVP_read_pw_string((char *)strbuf,SIZE,buf,enc);
 			if (i == 0)
@@ -386,11 +445,111 @@ bad:
 			}
 		}
 
+
+	if (outf == NULL)
+		{
+		BIO_set_fp(out,stdout,BIO_NOCLOSE);
+#ifndef OPENSSL_NO_SETVBUF_IONBF
+		if (bufsize != NULL)
+			setvbuf(stdout, (char *)NULL, _IONBF, 0);
+#endif /* ndef OPENSSL_NO_SETVBUF_IONBF */
+#ifdef OPENSSL_SYS_VMS
+		{
+		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+		out = BIO_push(tmpbio, out);
+		}
+#endif
+		}
+	else
+		{
+		if (BIO_write_filename(out,outf) <= 0)
+			{
+			perror(outf);
+			goto end;
+			}
+		}
+
+	rbio=in;
+	wbio=out;
+
+#ifdef ZLIB
+
+	if (do_zlib)
+		{
+		if ((bzl=BIO_new(BIO_f_zlib())) == NULL)
+			goto end;
+		if (enc)
+			wbio=BIO_push(bzl,wbio);
+		else
+			rbio=BIO_push(bzl,rbio);
+		}
+#endif
+
+	if (base64)
+		{
+		if ((b64=BIO_new(BIO_f_base64())) == NULL)
+			goto end;
+		if (debug)
+			{
+			BIO_set_callback(b64,BIO_debug_callback);
+			BIO_set_callback_arg(b64,(char *)bio_err);
+			}
+		if (olb64)
+			BIO_set_flags(b64,BIO_FLAGS_BASE64_NO_NL);
+		if (enc)
+			wbio=BIO_push(b64,wbio);
+		else
+			rbio=BIO_push(b64,rbio);
+		}
+
 	if (cipher != NULL)
 		{
+		/* Note that str is NULL if a key was passed on the command
+		 * line, so we get no salt in that case. Is this a bug?
+		 */
 		if (str != NULL)
 			{
-			EVP_BytesToKey(cipher,EVP_md5(),NULL,
+			/* Salt handling: if encrypting generate a salt and
+			 * write to output BIO. If decrypting read salt from
+			 * input BIO.
+			 */
+			unsigned char *sptr;
+			if(nosalt) sptr = NULL;
+			else {
+				if(enc) {
+					if(hsalt) {
+						if(!set_hex(hsalt,salt,sizeof salt)) {
+							BIO_printf(bio_err,
+								"invalid hex salt value\n");
+							goto end;
+						}
+					} else if (RAND_pseudo_bytes(salt, sizeof salt) < 0)
+						goto end;
+					/* If -P option then don't bother writing */
+					if((printkey != 2)
+					   && (BIO_write(wbio,magic,
+							 sizeof magic-1) != sizeof magic-1
+					       || BIO_write(wbio,
+							    (char *)salt,
+							    sizeof salt) != sizeof salt)) {
+						BIO_printf(bio_err,"error writing output file\n");
+						goto end;
+					}
+				} else if(BIO_read(rbio,mbuf,sizeof mbuf) != sizeof mbuf
+					  || BIO_read(rbio,
+						      (unsigned char *)salt,
+				    sizeof salt) != sizeof salt) {
+					BIO_printf(bio_err,"error reading input file\n");
+					goto end;
+				} else if(memcmp(mbuf,magic,sizeof magic-1)) {
+				    BIO_printf(bio_err,"bad magic number\n");
+				    goto end;
+				}
+
+				sptr = salt;
+			}
+
+			EVP_BytesToKey(cipher,dgst,sptr,
 				(unsigned char *)str,
 				strlen(str),1,key,iv);
 			/* zero the complete buffer or the string
@@ -398,16 +557,25 @@ bad:
 			 * bug picked up by
 			 * Larry J. Hughes Jr. <hughes@indiana.edu> */
 			if (str == strbuf)
-				memset(str,0,SIZE);
+				OPENSSL_cleanse(str,SIZE);
 			else
-				memset(str,0,strlen(str));
+				OPENSSL_cleanse(str,strlen(str));
 			}
-		if ((hiv != NULL) && !set_hex(hiv,iv,8))
+		if ((hiv != NULL) && !set_hex(hiv,iv,sizeof iv))
 			{
 			BIO_printf(bio_err,"invalid hex iv value\n");
 			goto end;
 			}
-		if ((hkey != NULL) && !set_hex(hkey,key,24))
+		if ((hiv == NULL) && (str == NULL)
+		    && EVP_CIPHER_iv_length(cipher) != 0)
+			{
+			/* No IV was explicitly set and no IV was generated
+			 * during EVP_BytesToKey. Hence the IV is undefined,
+			 * making correct decryption impossible. */
+			BIO_printf(bio_err, "iv undefined\n");
+			goto end;
+			}
+		if ((hkey != NULL) && !set_hex(hkey,key,sizeof key))
 			{
 			BIO_printf(bio_err,"invalid hex key value\n");
 			goto end;
@@ -415,15 +583,46 @@ bad:
 
 		if ((benc=BIO_new(BIO_f_cipher())) == NULL)
 			goto end;
-		BIO_set_cipher(benc,cipher,key,iv,enc);
+
+		/* Since we may be changing parameters work on the encryption
+		 * context rather than calling BIO_set_cipher().
+		 */
+
+		BIO_get_cipher_ctx(benc, &ctx);
+		if (!EVP_CipherInit_ex(ctx, cipher, NULL, NULL, NULL, enc))
+			{
+			BIO_printf(bio_err, "Error setting cipher %s\n",
+				EVP_CIPHER_name(cipher));
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+
+		if (nopad)
+			EVP_CIPHER_CTX_set_padding(ctx, 0);
+
+		if (!EVP_CipherInit_ex(ctx, NULL, NULL, key, iv, enc))
+			{
+			BIO_printf(bio_err, "Error setting cipher %s\n",
+				EVP_CIPHER_name(cipher));
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+
 		if (debug)
 			{
 			BIO_set_callback(benc,BIO_debug_callback);
-			BIO_set_callback_arg(benc,bio_err);
+			BIO_set_callback_arg(benc,(char *)bio_err);
 			}
 
 		if (printkey)
 			{
+			if (!nosalt)
+				{
+				printf("salt=");
+				for (i=0; i<(int)sizeof(salt); i++)
+					printf("%02X",salt[i]);
+				printf("\n");
+				}
 			if (cipher->key_len > 0)
 				{
 				printf("key=");
@@ -446,38 +645,6 @@ bad:
 			}
 		}
 
-
-	if (outf == NULL)
-		BIO_set_fp(out,stdout,BIO_NOCLOSE);
-	else
-		{
-		if (BIO_write_filename(out,outf) <= 0)
-			{
-			perror(outf);
-			goto end;
-			}
-		}
-
-	rbio=in;
-	wbio=out;
-
-	if (base64)
-		{
-		if ((b64=BIO_new(BIO_f_base64())) == NULL)
-			goto end;
-		if (debug)
-			{
-			BIO_set_callback(b64,BIO_debug_callback);
-			BIO_set_callback_arg(b64,bio_err);
-			}
-		if (olb64)
-			BIO_set_flags(b64,BIO_FLAGS_BASE64_NO_NL);
-		if (enc)
-			wbio=BIO_push(b64,wbio);
-		else
-			rbio=BIO_push(b64,rbio);
-		}
-
 	/* Only encrypt/decrypt as we write the file */
 	if (benc != NULL)
 		wbio=BIO_push(benc,wbio);
@@ -505,13 +672,19 @@ bad:
 		BIO_printf(bio_err,"bytes written:%8ld\n",BIO_number_written(out));
 		}
 end:
-	if (strbuf != NULL) Free(strbuf);
-	if (buff != NULL) Free(buff);
+	ERR_print_errors(bio_err);
+	if (strbuf != NULL) OPENSSL_free(strbuf);
+	if (buff != NULL) OPENSSL_free(buff);
 	if (in != NULL) BIO_free(in);
-	if (out != NULL) BIO_free(out);
+	if (out != NULL) BIO_free_all(out);
 	if (benc != NULL) BIO_free(benc);
 	if (b64 != NULL) BIO_free(b64);
-	EXIT(ret);
+#ifdef ZLIB
+	if (bzl != NULL) BIO_free(bzl);
+#endif
+	if(pass) OPENSSL_free(pass);
+	apps_shutdown();
+	OPENSSL_EXIT(ret);
 	}
 
 int set_hex(char *in, unsigned char *out, int size)

apps/engine.c

@@ -0,0 +1,549 @@
+/* apps/engine.c -*- mode: C; c-file-style: "eay" -*- */
+/* Written by Richard Levitte <richard@levitte.org> for the OpenSSL
+ * project 2000.
+ */
+/* ====================================================================
+ * Copyright (c) 2000 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    licensing@OpenSSL.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#ifdef OPENSSL_NO_STDIO
+#define APPS_WIN16
+#endif
+#include "apps.h"
+#include <openssl/err.h>
+#ifndef OPENSSL_NO_ENGINE
+#include <openssl/engine.h>
+#include <openssl/ssl.h>
+
+#undef PROG
+#define PROG	engine_main
+
+static const char *engine_usage[]={
+"usage: engine opts [engine ...]\n",
+" -v[v[v[v]]] - verbose mode, for each engine, list its 'control commands'\n",
+"               -vv will additionally display each command's description\n",
+"               -vvv will also add the input flags for each command\n",
+"               -vvvv will also show internal input flags\n",
+" -c          - for each engine, also list the capabilities\n",
+" -t[t]       - for each engine, check that they are really available\n",
+"               -tt will display error trace for unavailable engines\n",
+" -pre <cmd>  - runs command 'cmd' against the ENGINE before any attempts\n",
+"               to load it (if -t is used)\n",
+" -post <cmd> - runs command 'cmd' against the ENGINE after loading it\n",
+"               (only used if -t is also provided)\n",
+" NB: -pre and -post will be applied to all ENGINEs supplied on the command\n",
+" line, or all supported ENGINEs if none are specified.\n",
+" Eg. '-pre \"SO_PATH:/lib/libdriver.so\"' calls command \"SO_PATH\" with\n",
+" argument \"/lib/libdriver.so\".\n",
+NULL
+};
+
+static void identity(char *ptr)
+	{
+	return;
+	}
+
+static int append_buf(char **buf, const char *s, int *size, int step)
+	{
+	int l = strlen(s);
+
+	if (*buf == NULL)
+		{
+		*size = step;
+		*buf = OPENSSL_malloc(*size);
+		if (*buf == NULL)
+			return 0;
+		**buf = '\0';
+		}
+
+	if (**buf != '\0')
+		l += 2;		/* ", " */
+
+	if (strlen(*buf) + strlen(s) >= (unsigned int)*size)
+		{
+		*size += step;
+		*buf = OPENSSL_realloc(*buf, *size);
+		}
+
+	if (*buf == NULL)
+		return 0;
+
+	if (**buf != '\0')
+		BUF_strlcat(*buf, ", ", *size);
+	BUF_strlcat(*buf, s, *size);
+
+	return 1;
+	}
+
+static int util_flags(BIO *bio_out, unsigned int flags, const char *indent)
+	{
+	int started = 0, err = 0;
+	/* Indent before displaying input flags */
+	BIO_printf(bio_out, "%s%s(input flags): ", indent, indent);
+	if(flags == 0)
+		{
+		BIO_printf(bio_out, "<no flags>\n");
+		return 1;
+		}
+        /* If the object is internal, mark it in a way that shows instead of
+         * having it part of all the other flags, even if it really is. */
+	if(flags & ENGINE_CMD_FLAG_INTERNAL)
+		{
+		BIO_printf(bio_out, "[Internal] ");
+		}
+
+	if(flags & ENGINE_CMD_FLAG_NUMERIC)
+		{
+		BIO_printf(bio_out, "NUMERIC");
+		started = 1;
+		}
+	/* Now we check that no combinations of the mutually exclusive NUMERIC,
+	 * STRING, and NO_INPUT flags have been used. Future flags that can be
+	 * OR'd together with these would need to added after these to preserve
+	 * the testing logic. */
+	if(flags & ENGINE_CMD_FLAG_STRING)
+		{
+		if(started)
+			{
+			BIO_printf(bio_out, "|");
+			err = 1;
+			}
+		BIO_printf(bio_out, "STRING");
+		started = 1;
+		}
+	if(flags & ENGINE_CMD_FLAG_NO_INPUT)
+		{
+		if(started)
+			{
+			BIO_printf(bio_out, "|");
+			err = 1;
+			}
+		BIO_printf(bio_out, "NO_INPUT");
+		started = 1;
+		}
+	/* Check for unknown flags */
+	flags = flags & ~ENGINE_CMD_FLAG_NUMERIC &
+			~ENGINE_CMD_FLAG_STRING &
+			~ENGINE_CMD_FLAG_NO_INPUT &
+			~ENGINE_CMD_FLAG_INTERNAL;
+	if(flags)
+		{
+		if(started) BIO_printf(bio_out, "|");
+		BIO_printf(bio_out, "<0x%04X>", flags);
+		}
+	if(err)
+		BIO_printf(bio_out, "  <illegal flags!>");
+	BIO_printf(bio_out, "\n");
+	return 1;
+	}
+
+static int util_verbose(ENGINE *e, int verbose, BIO *bio_out, const char *indent)
+	{
+	static const int line_wrap = 78;
+	int num;
+	int ret = 0;
+	char *name = NULL;
+	char *desc = NULL;
+	int flags;
+	int xpos = 0;
+	STACK_OF(OPENSSL_STRING) *cmds = NULL;
+	if(!ENGINE_ctrl(e, ENGINE_CTRL_HAS_CTRL_FUNCTION, 0, NULL, NULL) ||
+			((num = ENGINE_ctrl(e, ENGINE_CTRL_GET_FIRST_CMD_TYPE,
+					0, NULL, NULL)) <= 0))
+		{
+#if 0
+		BIO_printf(bio_out, "%s<no control commands>\n", indent);
+#endif
+		return 1;
+		}
+
+	cmds = sk_OPENSSL_STRING_new_null();
+
+	if(!cmds)
+		goto err;
+	do {
+		int len;
+		/* Get the command input flags */
+		if((flags = ENGINE_ctrl(e, ENGINE_CTRL_GET_CMD_FLAGS, num,
+					NULL, NULL)) < 0)
+			goto err;
+                if (!(flags & ENGINE_CMD_FLAG_INTERNAL) || verbose >= 4)
+                        {
+                        /* Get the command name */
+                        if((len = ENGINE_ctrl(e, ENGINE_CTRL_GET_NAME_LEN_FROM_CMD, num,
+                                NULL, NULL)) <= 0)
+                                goto err;
+                        if((name = OPENSSL_malloc(len + 1)) == NULL)
+                                goto err;
+                        if(ENGINE_ctrl(e, ENGINE_CTRL_GET_NAME_FROM_CMD, num, name,
+                                NULL) <= 0)
+                                goto err;
+                        /* Get the command description */
+                        if((len = ENGINE_ctrl(e, ENGINE_CTRL_GET_DESC_LEN_FROM_CMD, num,
+                                NULL, NULL)) < 0)
+                                goto err;
+                        if(len > 0)
+                                {
+                                if((desc = OPENSSL_malloc(len + 1)) == NULL)
+                                        goto err;
+                                if(ENGINE_ctrl(e, ENGINE_CTRL_GET_DESC_FROM_CMD, num, desc,
+                                        NULL) <= 0)
+                                        goto err;
+                                }
+                        /* Now decide on the output */
+                        if(xpos == 0)
+                                /* Do an indent */
+                                xpos = BIO_puts(bio_out, indent);
+                        else
+                                /* Otherwise prepend a ", " */
+                                xpos += BIO_printf(bio_out, ", ");
+                        if(verbose == 1)
+                                {
+                                /* We're just listing names, comma-delimited */
+                                if((xpos > (int)strlen(indent)) &&
+					(xpos + (int)strlen(name) > line_wrap))
+                                        {
+                                        BIO_printf(bio_out, "\n");
+                                        xpos = BIO_puts(bio_out, indent);
+                                        }
+                                xpos += BIO_printf(bio_out, "%s", name);
+                                }
+                        else
+                                {
+                                /* We're listing names plus descriptions */
+                                BIO_printf(bio_out, "%s: %s\n", name,
+                                        (desc == NULL) ? "<no description>" : desc);
+                                /* ... and sometimes input flags */
+                                if((verbose >= 3) && !util_flags(bio_out, flags,
+                                        indent))
+                                        goto err;
+                                xpos = 0;
+                                }
+                        }
+		OPENSSL_free(name); name = NULL;
+		if(desc) { OPENSSL_free(desc); desc = NULL; }
+		/* Move to the next command */
+		num = ENGINE_ctrl(e, ENGINE_CTRL_GET_NEXT_CMD_TYPE,
+					num, NULL, NULL);
+		} while(num > 0);
+	if(xpos > 0)
+		BIO_printf(bio_out, "\n");
+	ret = 1;
+err:
+	if(cmds) sk_OPENSSL_STRING_pop_free(cmds, identity);
+	if(name) OPENSSL_free(name);
+	if(desc) OPENSSL_free(desc);
+	return ret;
+	}
+
+static void util_do_cmds(ENGINE *e, STACK_OF(OPENSSL_STRING) *cmds,
+			BIO *bio_out, const char *indent)
+	{
+	int loop, res, num = sk_OPENSSL_STRING_num(cmds);
+
+	if(num < 0)
+		{
+		BIO_printf(bio_out, "[Error]: internal stack error\n");
+		return;
+		}
+	for(loop = 0; loop < num; loop++)
+		{
+		char buf[256];
+		const char *cmd, *arg;
+		cmd = sk_OPENSSL_STRING_value(cmds, loop);
+		res = 1; /* assume success */
+		/* Check if this command has no ":arg" */
+		if((arg = strstr(cmd, ":")) == NULL)
+			{
+			if(!ENGINE_ctrl_cmd_string(e, cmd, NULL, 0))
+				res = 0;
+			}
+		else
+			{
+			if((int)(arg - cmd) > 254)
+				{
+				BIO_printf(bio_out,"[Error]: command name too long\n");
+				return;
+				}
+			memcpy(buf, cmd, (int)(arg - cmd));
+			buf[arg-cmd] = '\0';
+			arg++; /* Move past the ":" */
+			/* Call the command with the argument */
+			if(!ENGINE_ctrl_cmd_string(e, buf, arg, 0))
+				res = 0;
+			}
+		if(res)
+			BIO_printf(bio_out, "[Success]: %s\n", cmd);
+		else
+			{
+			BIO_printf(bio_out, "[Failure]: %s\n", cmd);
+			ERR_print_errors(bio_out);
+			}
+		}
+	}
+
+int MAIN(int, char **);
+
+int MAIN(int argc, char **argv)
+	{
+	int ret=1,i;
+	const char **pp;
+	int verbose=0, list_cap=0, test_avail=0, test_avail_noise = 0;
+	ENGINE *e;
+	STACK_OF(OPENSSL_STRING) *engines = sk_OPENSSL_STRING_new_null();
+	STACK_OF(OPENSSL_STRING) *pre_cmds = sk_OPENSSL_STRING_new_null();
+	STACK_OF(OPENSSL_STRING) *post_cmds = sk_OPENSSL_STRING_new_null();
+	int badops=1;
+	BIO *bio_out=NULL;
+	const char *indent = "     ";
+
+	apps_startup();
+	SSL_load_error_strings();
+
+	if (bio_err == NULL)
+		bio_err=BIO_new_fp(stderr,BIO_NOCLOSE);
+
+	if (!load_config(bio_err, NULL))
+		goto end;
+	bio_out=BIO_new_fp(stdout,BIO_NOCLOSE);
+#ifdef OPENSSL_SYS_VMS
+	{
+	BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+	bio_out = BIO_push(tmpbio, bio_out);
+	}
+#endif
+
+	argc--;
+	argv++;
+	while (argc >= 1)
+		{
+		if (strncmp(*argv,"-v",2) == 0)
+			{
+			if(strspn(*argv + 1, "v") < strlen(*argv + 1))
+				goto skip_arg_loop;
+			if((verbose=strlen(*argv + 1)) > 4)
+				goto skip_arg_loop;
+			}
+		else if (strcmp(*argv,"-c") == 0)
+			list_cap=1;
+		else if (strncmp(*argv,"-t",2) == 0)
+			{
+			test_avail=1;
+			if(strspn(*argv + 1, "t") < strlen(*argv + 1))
+				goto skip_arg_loop;
+			if((test_avail_noise = strlen(*argv + 1) - 1) > 1)
+				goto skip_arg_loop;
+			}
+		else if (strcmp(*argv,"-pre") == 0)
+			{
+			argc--; argv++;
+			if (argc == 0)
+				goto skip_arg_loop;
+			sk_OPENSSL_STRING_push(pre_cmds,*argv);
+			}
+		else if (strcmp(*argv,"-post") == 0)
+			{
+			argc--; argv++;
+			if (argc == 0)
+				goto skip_arg_loop;
+			sk_OPENSSL_STRING_push(post_cmds,*argv);
+			}
+		else if ((strncmp(*argv,"-h",2) == 0) ||
+				(strcmp(*argv,"-?") == 0))
+			goto skip_arg_loop;
+		else
+			sk_OPENSSL_STRING_push(engines,*argv);
+		argc--;
+		argv++;
+		}
+	/* Looks like everything went OK */
+	badops = 0;
+skip_arg_loop:
+
+	if (badops)
+		{
+		for (pp=engine_usage; (*pp != NULL); pp++)
+			BIO_printf(bio_err,"%s",*pp);
+		goto end;
+		}
+
+	if (sk_OPENSSL_STRING_num(engines) == 0)
+		{
+		for(e = ENGINE_get_first(); e != NULL; e = ENGINE_get_next(e))
+			{
+			sk_OPENSSL_STRING_push(engines,(char *)ENGINE_get_id(e));
+			}
+		}
+
+	for (i=0; i<sk_OPENSSL_STRING_num(engines); i++)
+		{
+		const char *id = sk_OPENSSL_STRING_value(engines,i);
+		if ((e = ENGINE_by_id(id)) != NULL)
+			{
+			const char *name = ENGINE_get_name(e);
+			/* Do "id" first, then "name". Easier to auto-parse. */
+			BIO_printf(bio_out, "(%s) %s\n", id, name);
+			util_do_cmds(e, pre_cmds, bio_out, indent);
+			if (strcmp(ENGINE_get_id(e), id) != 0)
+				{
+				BIO_printf(bio_out, "Loaded: (%s) %s\n",
+					ENGINE_get_id(e), ENGINE_get_name(e));
+				}
+			if (list_cap)
+				{
+				int cap_size = 256;
+				char *cap_buf = NULL;
+				int k,n;
+				const int *nids;
+				ENGINE_CIPHERS_PTR fn_c;
+				ENGINE_DIGESTS_PTR fn_d;
+				ENGINE_PKEY_METHS_PTR fn_pk;
+
+				if (ENGINE_get_RSA(e) != NULL
+					&& !append_buf(&cap_buf, "RSA",
+						&cap_size, 256))
+					goto end;
+				if (ENGINE_get_DSA(e) != NULL
+					&& !append_buf(&cap_buf, "DSA",
+						&cap_size, 256))
+					goto end;
+				if (ENGINE_get_DH(e) != NULL
+					&& !append_buf(&cap_buf, "DH",
+						&cap_size, 256))
+					goto end;
+				if (ENGINE_get_RAND(e) != NULL
+					&& !append_buf(&cap_buf, "RAND",
+						&cap_size, 256))
+					goto end;
+
+				fn_c = ENGINE_get_ciphers(e);
+				if(!fn_c) goto skip_ciphers;
+				n = fn_c(e, NULL, &nids, 0);
+				for(k=0 ; k < n ; ++k)
+					if(!append_buf(&cap_buf,
+						       OBJ_nid2sn(nids[k]),
+						       &cap_size, 256))
+						goto end;
+
+skip_ciphers:
+				fn_d = ENGINE_get_digests(e);
+				if(!fn_d) goto skip_digests;
+				n = fn_d(e, NULL, &nids, 0);
+				for(k=0 ; k < n ; ++k)
+					if(!append_buf(&cap_buf,
+						       OBJ_nid2sn(nids[k]),
+						       &cap_size, 256))
+						goto end;
+
+skip_digests:
+				fn_pk = ENGINE_get_pkey_meths(e);
+				if(!fn_pk) goto skip_pmeths;
+				n = fn_pk(e, NULL, &nids, 0);
+				for(k=0 ; k < n ; ++k)
+					if(!append_buf(&cap_buf,
+						       OBJ_nid2sn(nids[k]),
+						       &cap_size, 256))
+						goto end;
+skip_pmeths:
+				if (cap_buf && (*cap_buf != '\0'))
+					BIO_printf(bio_out, " [%s]\n", cap_buf);
+
+				OPENSSL_free(cap_buf);
+				}
+			if(test_avail)
+				{
+				BIO_printf(bio_out, "%s", indent);
+				if (ENGINE_init(e))
+					{
+					BIO_printf(bio_out, "[ available ]\n");
+					util_do_cmds(e, post_cmds, bio_out, indent);
+					ENGINE_finish(e);
+					}
+				else
+					{
+					BIO_printf(bio_out, "[ unavailable ]\n");
+					if(test_avail_noise)
+						ERR_print_errors_fp(stdout);
+					ERR_clear_error();
+					}
+				}
+			if((verbose > 0) && !util_verbose(e, verbose, bio_out, indent))
+				goto end;
+			ENGINE_free(e);
+			}
+		else
+			ERR_print_errors(bio_err);
+		}
+
+	ret=0;
+end:
+
+	ERR_print_errors(bio_err);
+	sk_OPENSSL_STRING_pop_free(engines, identity);
+	sk_OPENSSL_STRING_pop_free(pre_cmds, identity);
+	sk_OPENSSL_STRING_pop_free(post_cmds, identity);
+	if (bio_out != NULL) BIO_free_all(bio_out);
+	apps_shutdown();
+	OPENSSL_EXIT(ret);
+	}
+#else
+
+# if PEDANTIC
+static void *dummy=&dummy;
+# endif
+
+#endif

apps/errstr.c

@@ -68,6 +68,8 @@
 #undef PROG
 #define PROG	errstr_main
 
+int MAIN(int, char **);
+
 int MAIN(int argc, char **argv)
 	{
 	int i,ret=0;
@@ -89,12 +91,20 @@ int MAIN(int argc, char **argv)
 		out=BIO_new(BIO_s_file());
 		if ((out != NULL) && BIO_set_fp(out,stdout,BIO_NOCLOSE))
 			{
-			lh_node_stats_bio((LHASH *)ERR_get_string_table(),out);
-			lh_stats_bio((LHASH *)ERR_get_string_table(),out);
-			lh_node_usage_stats_bio((LHASH *)
-				ERR_get_string_table(),out);
+#ifdef OPENSSL_SYS_VMS
+			{
+			BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+			out = BIO_push(tmpbio, out);
 			}
-		if (out != NULL) BIO_free(out);
+#endif
+			lh_ERR_STRING_DATA_node_stats_bio(
+						  ERR_get_string_table(), out);
+			lh_ERR_STRING_DATA_stats_bio(ERR_get_string_table(),
+						     out);
+			lh_ERR_STRING_DATA_node_usage_stats_bio(
+						    ERR_get_string_table(),out);
+			}
+		if (out != NULL) BIO_free_all(out);
 		argc--;
 		argv++;
 		}
@@ -102,7 +112,10 @@ int MAIN(int argc, char **argv)
 	for (i=1; i<argc; i++)
 		{
 		if (sscanf(argv[i],"%lx",&l))
-			printf("%s\n",ERR_error_string(l,buf));
+			{
+			ERR_error_string_n(l, buf, sizeof buf);
+			printf("%s\n",buf);
+			}
 		else
 			{
 			printf("%s: bad error code\n",argv[i]);
@@ -110,5 +123,6 @@ int MAIN(int argc, char **argv)
 			ret++;
 			}
 		}
-	EXIT(ret);
+	apps_shutdown();
+	OPENSSL_EXIT(ret);
 	}

apps/gendh.c

@@ -1,4 +1,5 @@
 /* apps/gendh.c */
+/* obsoleted by dhparam.c */
 /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
  * All rights reserved.
  *
@@ -56,7 +57,14 @@
  * [including the GNU Public Licence.]
  */
 
-#ifndef NO_DH
+#include <openssl/opensslconf.h>
+/* Until the key-gen callbacks are modified to use newer prototypes, we allow
+ * deprecated functions for openssl-internal code */
+#ifdef OPENSSL_NO_DEPRECATED
+#undef OPENSSL_NO_DEPRECATED
+#endif
+
+#ifndef OPENSSL_NO_DH
 #include <stdio.h>
 #include <string.h>
 #include <sys/types.h>
@@ -74,24 +82,33 @@
 #undef PROG
 #define PROG gendh_main
 
-static void MS_CALLBACK dh_cb(int p, int n, void *arg);
-static long dh_load_rand(char *names);
+static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb);
+
+int MAIN(int, char **);
+
 int MAIN(int argc, char **argv)
 	{
-	char buffer[200];
+	BN_GENCB cb;
 	DH *dh=NULL;
 	int ret=1,num=DEFBITS;
 	int g=2;
 	char *outfile=NULL;
-	char *inrand=NULL,*randfile;
+	char *inrand=NULL;
+#ifndef OPENSSL_NO_ENGINE
+	char *engine=NULL;
+#endif
 	BIO *out=NULL;
 
 	apps_startup();
 
+	BN_GENCB_set(&cb, dh_cb, bio_err);
 	if (bio_err == NULL)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
+	if (!load_config(bio_err, NULL))
+		goto end;
+
 	argv++;
 	argc--;
 	for (;;)
@@ -108,6 +125,13 @@ int MAIN(int argc, char **argv)
 			g=3; */
 		else if (strcmp(*argv,"-5") == 0)
 			g=5;
+#ifndef OPENSSL_NO_ENGINE
+		else if (strcmp(*argv,"-engine") == 0)
+			{
+			if (--argc < 1) goto bad;
+			engine= *(++argv);
+			}
+#endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -123,15 +147,22 @@ int MAIN(int argc, char **argv)
 bad:
 		BIO_printf(bio_err,"usage: gendh [args] [numbits]\n");
 		BIO_printf(bio_err," -out file - output the key to 'file\n");
-		BIO_printf(bio_err," -2    use 2 as the generator value\n");
-	/*	BIO_printf(bio_err," -3    use 3 as the generator value\n"); */
-		BIO_printf(bio_err," -5    use 5 as the generator value\n");
-		BIO_printf(bio_err," -rand file:file:...\n");
+		BIO_printf(bio_err," -2        - use 2 as the generator value\n");
+	/*	BIO_printf(bio_err," -3        - use 3 as the generator value\n"); */
+		BIO_printf(bio_err," -5        - use 5 as the generator value\n");
+#ifndef OPENSSL_NO_ENGINE
+		BIO_printf(bio_err," -engine e - use engine e, possibly a hardware device.\n");
+#endif
+		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"           - load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"             the random number generator\n");
 		goto end;
 		}
 		
+#ifndef OPENSSL_NO_ENGINE
+        setup_engine(bio_err, engine, 0);
+#endif
+
 	out=BIO_new(BIO_s_file());
 	if (out == NULL)
 		{
@@ -140,7 +171,15 @@ bad:
 		}
 
 	if (outfile == NULL)
+		{
 		BIO_set_fp(out,stdout,BIO_NOCLOSE);
+#ifdef OPENSSL_SYS_VMS
+		{
+		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+		out = BIO_push(tmpbio, out);
+		}
+#endif
+		}
 	else
 		{
 		if (BIO_write_filename(out,outfile) <= 0)
@@ -150,28 +189,21 @@ bad:
 			}
 		}
 
-	randfile=RAND_file_name(buffer,200);
-	if ((randfile == NULL)|| !RAND_load_file(randfile,1024L*1024L))
-		BIO_printf(bio_err,"unable to load 'random state'\n");
-
-	if (inrand == NULL)
-		BIO_printf(bio_err,"warning, not much extra random data, consider using the -rand option\n");
-	else
+	if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL)
 		{
-		BIO_printf(bio_err,"%ld semi-random bytes loaded\n",
-			dh_load_rand(inrand));
+		BIO_printf(bio_err,"warning, not much extra random data, consider using the -rand option\n");
 		}
+	if (inrand != NULL)
+		BIO_printf(bio_err,"%ld semi-random bytes loaded\n",
+			app_RAND_load_files(inrand));
 
-	BIO_printf(bio_err,"Generating DH parameters, %d bit long strong prime, generator of %d\n",num,g);
+	BIO_printf(bio_err,"Generating DH parameters, %d bit long safe prime, generator %d\n",num,g);
 	BIO_printf(bio_err,"This is going to take a long time\n");
-	dh=DH_generate_parameters(num,g,dh_cb,bio_err);
-		
-	if (dh == NULL) goto end;
 
-	if (randfile == NULL)
-		BIO_printf(bio_err,"unable to write 'random state'\n");
-	else
-		RAND_write_file(randfile);
+	if(((dh = DH_new()) == NULL) || !DH_generate_parameters_ex(dh, num, g, &cb))
+		goto end;
+		
+	app_RAND_write_file(NULL, bio_err);
 
 	if (!PEM_write_bio_DHparams(out,dh))
 		goto end;
@@ -179,12 +211,13 @@ bad:
 end:
 	if (ret != 0)
 		ERR_print_errors(bio_err);
-	if (out != NULL) BIO_free(out);
+	if (out != NULL) BIO_free_all(out);
 	if (dh != NULL) DH_free(dh);
-	EXIT(ret);
+	apps_shutdown();
+	OPENSSL_EXIT(ret);
 	}
 
-static void MS_CALLBACK dh_cb(int p, int n, void *arg)
+static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb)
 	{
 	char c='*';
 
@@ -192,32 +225,17 @@ static void MS_CALLBACK dh_cb(int p, int n, void *arg)
 	if (p == 1) c='+';
 	if (p == 2) c='*';
 	if (p == 3) c='\n';
-	BIO_write((BIO *)arg,&c,1);
-	(void)BIO_flush((BIO *)arg);
+	BIO_write(cb->arg,&c,1);
+	(void)BIO_flush(cb->arg);
 #ifdef LINT
 	p=n;
 #endif
+	return 1;
 	}
+#else /* !OPENSSL_NO_DH */
 
-static long dh_load_rand(char *name)
-	{
-	char *p,*n;
-	int last;
-	long tot=0;
+# if PEDANTIC
+static void *dummy=&dummy;
+# endif
 
-	for (;;)
-		{
-		last=0;
-		for (p=name; ((*p != '\0') && (*p != LIST_SEPARATOR_CHAR)); p++);
-		if (*p == '\0') last=1;
-		*p='\0';
-		n=name;
-		name=p+1;
-		if (*n == '\0') break;
-
-		tot+=RAND_load_file(n,1);
-		if (last) break;
-		}
-	return(tot);
-	}
 #endif

apps/gendsa.c

@@ -56,14 +56,14 @@
  * [including the GNU Public Licence.]
  */
 
-#ifndef NO_DSA
+#include <openssl/opensslconf.h>	/* for OPENSSL_NO_DSA */
+#ifndef OPENSSL_NO_DSA
 #include <stdio.h>
 #include <string.h>
 #include <sys/types.h>
 #include <sys/stat.h>
 #include "apps.h"
 #include <openssl/bio.h>
-#include <openssl/rand.h>
 #include <openssl/err.h>
 #include <openssl/bn.h>
 #include <openssl/dsa.h>
@@ -74,16 +74,20 @@
 #undef PROG
 #define PROG gendsa_main
 
-static long dsa_load_rand(char *names);
+int MAIN(int, char **);
+
 int MAIN(int argc, char **argv)
 	{
-	char buffer[200];
 	DSA *dsa=NULL;
 	int ret=1;
 	char *outfile=NULL;
-	char *inrand=NULL,*randfile,*dsaparams=NULL;
+	char *inrand=NULL,*dsaparams=NULL;
+	char *passargout = NULL, *passout = NULL;
 	BIO *out=NULL,*in=NULL;
-	EVP_CIPHER *enc=NULL;
+	const EVP_CIPHER *enc=NULL;
+#ifndef OPENSSL_NO_ENGINE
+	char *engine=NULL;
+#endif
 
 	apps_startup();
 
@@ -91,6 +95,9 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
+	if (!load_config(bio_err, NULL))
+		goto end;
+
 	argv++;
 	argc--;
 	for (;;)
@@ -101,6 +108,18 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outfile= *(++argv);
 			}
+		else if (strcmp(*argv,"-passout") == 0)
+			{
+			if (--argc < 1) goto bad;
+			passargout= *(++argv);
+			}
+#ifndef OPENSSL_NO_ENGINE
+		else if (strcmp(*argv,"-engine") == 0)
+			{
+			if (--argc < 1) goto bad;
+			engine= *(++argv);
+			}
+#endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -108,15 +127,35 @@ int MAIN(int argc, char **argv)
 			}
 		else if (strcmp(*argv,"-") == 0)
 			goto bad;
-#ifndef NO_DES
+#ifndef OPENSSL_NO_DES
 		else if (strcmp(*argv,"-des") == 0)
 			enc=EVP_des_cbc();
 		else if (strcmp(*argv,"-des3") == 0)
 			enc=EVP_des_ede3_cbc();
 #endif
-#ifndef NO_IDEA
+#ifndef OPENSSL_NO_IDEA
 		else if (strcmp(*argv,"-idea") == 0)
 			enc=EVP_idea_cbc();
+#endif
+#ifndef OPENSSL_NO_SEED
+		else if (strcmp(*argv,"-seed") == 0)
+			enc=EVP_seed_cbc();
+#endif
+#ifndef OPENSSL_NO_AES
+		else if (strcmp(*argv,"-aes128") == 0)
+			enc=EVP_aes_128_cbc();
+		else if (strcmp(*argv,"-aes192") == 0)
+			enc=EVP_aes_192_cbc();
+		else if (strcmp(*argv,"-aes256") == 0)
+			enc=EVP_aes_256_cbc();
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+		else if (strcmp(*argv,"-camellia128") == 0)
+			enc=EVP_camellia_128_cbc();
+		else if (strcmp(*argv,"-camellia192") == 0)
+			enc=EVP_camellia_192_cbc();
+		else if (strcmp(*argv,"-camellia256") == 0)
+			enc=EVP_camellia_256_cbc();
 #endif
 		else if (**argv != '-' && dsaparams == NULL)
 			{
@@ -133,14 +172,29 @@ int MAIN(int argc, char **argv)
 bad:
 		BIO_printf(bio_err,"usage: gendsa [args] dsaparam-file\n");
 		BIO_printf(bio_err," -out file - output the key to 'file'\n");
-#ifndef NO_DES
+#ifndef OPENSSL_NO_DES
 		BIO_printf(bio_err," -des      - encrypt the generated key with DES in cbc mode\n");
 		BIO_printf(bio_err," -des3     - encrypt the generated key with DES in ede cbc mode (168 bit key)\n");
 #endif
-#ifndef NO_IDEA
+#ifndef OPENSSL_NO_IDEA
 		BIO_printf(bio_err," -idea     - encrypt the generated key with IDEA in cbc mode\n");
 #endif
-		BIO_printf(bio_err," -rand file:file:...\n");
+#ifndef OPENSSL_NO_SEED
+		BIO_printf(bio_err," -seed\n");
+		BIO_printf(bio_err,"                 encrypt PEM output with cbc seed\n");
+#endif
+#ifndef OPENSSL_NO_AES
+		BIO_printf(bio_err," -aes128, -aes192, -aes256\n");
+		BIO_printf(bio_err,"                 encrypt PEM output with cbc aes\n");
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+		BIO_printf(bio_err," -camellia128, -camellia192, -camellia256\n");
+		BIO_printf(bio_err,"                 encrypt PEM output with cbc camellia\n");
+#endif
+#ifndef OPENSSL_NO_ENGINE
+		BIO_printf(bio_err," -engine e - use engine e, possibly a hardware device.\n");
+#endif
+		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"           - load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"             the random number generator\n");
 		BIO_printf(bio_err," dsaparam-file\n");
@@ -148,6 +202,16 @@ bad:
 		goto end;
 		}
 
+#ifndef OPENSSL_NO_ENGINE
+        setup_engine(bio_err, engine, 0);
+#endif
+
+	if(!app_passwd(bio_err, NULL, passargout, NULL, &passout)) {
+		BIO_printf(bio_err, "Error getting password\n");
+		goto end;
+	}
+
+
 	in=BIO_new(BIO_s_file());
 	if (!(BIO_read_filename(in,dsaparams)))
 		{
@@ -161,12 +225,21 @@ bad:
 		goto end;
 		}
 	BIO_free(in);
+	in = NULL;
 		
 	out=BIO_new(BIO_s_file());
 	if (out == NULL) goto end;
 
 	if (outfile == NULL)
+		{
 		BIO_set_fp(out,stdout,BIO_NOCLOSE);
+#ifdef OPENSSL_SYS_VMS
+		{
+		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+		out = BIO_push(tmpbio, out);
+		}
+#endif
+		}
 	else
 		{
 		if (BIO_write_filename(out,outfile) <= 0)
@@ -176,57 +249,37 @@ bad:
 			}
 		}
 
-	randfile=RAND_file_name(buffer,200);
-	if ((randfile == NULL)|| !RAND_load_file(randfile,1024L*1024L))
-		BIO_printf(bio_err,"unable to load 'random state'\n");
-
-	if (inrand == NULL)
-		BIO_printf(bio_err,"warning, not much extra random data, consider using the -rand option\n");
-	else
+	if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL)
 		{
-		BIO_printf(bio_err,"%ld semi-random bytes loaded\n",
-			dsa_load_rand(inrand));
+		BIO_printf(bio_err,"warning, not much extra random data, consider using the -rand option\n");
 		}
+	if (inrand != NULL)
+		BIO_printf(bio_err,"%ld semi-random bytes loaded\n",
+			app_RAND_load_files(inrand));
 
 	BIO_printf(bio_err,"Generating DSA key, %d bits\n",
 							BN_num_bits(dsa->p));
 	if (!DSA_generate_key(dsa)) goto end;
 
-	if (randfile == NULL)
-		BIO_printf(bio_err,"unable to write 'random state'\n");
-	else
-		RAND_write_file(randfile);
+	app_RAND_write_file(NULL, bio_err);
 
-	if (!PEM_write_bio_DSAPrivateKey(out,dsa,enc,NULL,0,NULL,NULL))
+	if (!PEM_write_bio_DSAPrivateKey(out,dsa,enc,NULL,0,NULL, passout))
 		goto end;
 	ret=0;
 end:
 	if (ret != 0)
 		ERR_print_errors(bio_err);
-	if (out != NULL) BIO_free(out);
+	if (in != NULL) BIO_free(in);
+	if (out != NULL) BIO_free_all(out);
 	if (dsa != NULL) DSA_free(dsa);
-	EXIT(ret);
+	if(passout) OPENSSL_free(passout);
+	apps_shutdown();
+	OPENSSL_EXIT(ret);
 	}
+#else /* !OPENSSL_NO_DSA */
 
-static long dsa_load_rand(char *name)
-	{
-	char *p,*n;
-	int last;
-	long tot=0;
+# if PEDANTIC
+static void *dummy=&dummy;
+# endif
 
-	for (;;)
-		{
-		last=0;
-		for (p=name; ((*p != '\0') && (*p != LIST_SEPARATOR_CHAR)); p++);
-		if (*p == '\0') last=1;
-		*p='\0';
-		n=name;
-		name=p+1;
-		if (*n == '\0') break;
-
-		tot+=RAND_load_file(n,1);
-		if (last) break;
-		}
-	return(tot);
-	}
 #endif

apps/genpkey.c

@@ -0,0 +1,440 @@
+/* apps/genpkey.c */
+/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
+ * project 2006
+ */
+/* ====================================================================
+ * Copyright (c) 2006 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    licensing@OpenSSL.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+#include <stdio.h>
+#include <string.h>
+#include "apps.h"
+#include <openssl/pem.h>
+#include <openssl/err.h>
+#include <openssl/evp.h>
+#ifndef OPENSSL_NO_ENGINE
+#include <openssl/engine.h>
+#endif
+
+static int init_keygen_file(BIO *err, EVP_PKEY_CTX **pctx,
+				const char *file, ENGINE *e);
+static int genpkey_cb(EVP_PKEY_CTX *ctx);
+
+#define PROG genpkey_main
+
+int MAIN(int, char **);
+
+int MAIN(int argc, char **argv)
+	{
+	ENGINE *e = NULL;
+	char **args, *outfile = NULL;
+	char *passarg = NULL;
+	BIO *in = NULL, *out = NULL;
+	const EVP_CIPHER *cipher = NULL;
+	int outformat;
+	int text = 0;
+	EVP_PKEY *pkey=NULL;
+	EVP_PKEY_CTX *ctx = NULL;
+	char *pass = NULL;
+	int badarg = 0;
+	int ret = 1, rv;
+
+	int do_param = 0;
+
+	if (bio_err == NULL)
+		bio_err = BIO_new_fp (stderr, BIO_NOCLOSE);
+
+	if (!load_config(bio_err, NULL))
+		goto end;
+
+	outformat=FORMAT_PEM;
+
+	ERR_load_crypto_strings();
+	OpenSSL_add_all_algorithms();
+	args = argv + 1;
+	while (!badarg && *args && *args[0] == '-')
+		{
+		if (!strcmp(*args,"-outform"))
+			{
+			if (args[1])
+				{
+				args++;
+				outformat=str2fmt(*args);
+				}
+			else badarg = 1;
+			}
+		else if (!strcmp(*args,"-pass"))
+			{
+			if (!args[1]) goto bad;
+			passarg= *(++args);
+			}
+#ifndef OPENSSL_NO_ENGINE
+		else if (strcmp(*args,"-engine") == 0)
+			{
+			if (!args[1])
+				goto bad;
+        		e = setup_engine(bio_err, *(++args), 0);
+			}
+#endif
+		else if (!strcmp (*args, "-paramfile"))
+			{
+			if (!args[1])
+				goto bad;
+			args++;
+			if (do_param == 1)
+				goto bad;
+			if (!init_keygen_file(bio_err, &ctx, *args, e))
+				goto end;
+			}
+		else if (!strcmp (*args, "-out"))
+			{
+			if (args[1])
+				{
+				args++;
+				outfile = *args;
+				}
+			else badarg = 1;
+			}
+		else if (strcmp(*args,"-algorithm") == 0)
+			{
+			if (!args[1])
+				goto bad;
+			if (!init_gen_str(bio_err, &ctx, *(++args),e, do_param))
+				goto end;
+			}
+		else if (strcmp(*args,"-pkeyopt") == 0)
+			{
+			if (!args[1])
+				goto bad;
+			if (!ctx)
+				{
+				BIO_puts(bio_err, "No keytype specified\n");
+				goto bad;
+				}
+			else if (pkey_ctrl_string(ctx, *(++args)) <= 0)
+				{
+				BIO_puts(bio_err, "parameter setting error\n");
+				ERR_print_errors(bio_err);
+				goto end;
+				}
+			}
+		else if (strcmp(*args,"-genparam") == 0)
+			{
+			if (ctx)
+				goto bad;
+			do_param = 1;
+			}
+		else if (strcmp(*args,"-text") == 0)
+			text=1;
+		else
+			{
+			cipher = EVP_get_cipherbyname(*args + 1);
+			if (!cipher)
+				{
+				BIO_printf(bio_err, "Unknown cipher %s\n",
+								*args + 1);
+				badarg = 1;
+				}
+			if (do_param == 1)
+				badarg = 1;
+			}
+		args++;
+		}
+
+	if (!ctx)
+		badarg = 1;
+
+	if (badarg)
+		{
+		bad:
+		BIO_printf(bio_err, "Usage: genpkey [options]\n");
+		BIO_printf(bio_err, "where options may be\n");
+		BIO_printf(bio_err, "-out file          output file\n");
+		BIO_printf(bio_err, "-outform X         output format (DER or PEM)\n");
+		BIO_printf(bio_err, "-pass arg          output file pass phrase source\n");
+		BIO_printf(bio_err, "-<cipher>          use cipher <cipher> to encrypt the key\n");
+#ifndef OPENSSL_NO_ENGINE
+		BIO_printf(bio_err, "-engine e          use engine e, possibly a hardware device.\n");
+#endif
+		BIO_printf(bio_err, "-paramfile file    parameters file\n");
+		BIO_printf(bio_err, "-algorithm alg     the public key algorithm\n");
+		BIO_printf(bio_err, "-pkeyopt opt:value set the public key algorithm option <opt>\n"
+				            "                   to value <value>\n");
+		BIO_printf(bio_err, "-genparam          generate parameters, not key\n");
+		BIO_printf(bio_err, "-text              print the in text\n");
+		BIO_printf(bio_err, "NB: options order may be important!  See the manual page.\n");
+		goto end;
+		}
+
+	if (!app_passwd(bio_err, passarg, NULL, &pass, NULL))
+		{
+		BIO_puts(bio_err, "Error getting password\n");
+		goto end;
+		}
+
+	if (outfile)
+		{
+		if (!(out = BIO_new_file (outfile, "wb")))
+			{
+			BIO_printf(bio_err,
+				 "Can't open output file %s\n", outfile);
+			goto end;
+			}
+		}
+	else
+		{
+		out = BIO_new_fp (stdout, BIO_NOCLOSE);
+#ifdef OPENSSL_SYS_VMS
+			{
+			BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+			out = BIO_push(tmpbio, out);
+			}
+#endif
+		}
+
+	EVP_PKEY_CTX_set_cb(ctx, genpkey_cb);
+	EVP_PKEY_CTX_set_app_data(ctx, bio_err);
+
+	if (do_param)
+		{
+		if (EVP_PKEY_paramgen(ctx, &pkey) <= 0)
+			{
+			BIO_puts(bio_err, "Error generating parameters\n");
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+		}
+	else
+		{
+		if (EVP_PKEY_keygen(ctx, &pkey) <= 0)
+			{
+			BIO_puts(bio_err, "Error generating key\n");
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+		}
+
+	if (do_param)
+		rv = PEM_write_bio_Parameters(out, pkey);
+	else if (outformat == FORMAT_PEM) 
+		rv = PEM_write_bio_PrivateKey(out, pkey, cipher, NULL, 0,
+								NULL, pass);
+	else if (outformat == FORMAT_ASN1)
+		rv = i2d_PrivateKey_bio(out, pkey);
+	else
+		{
+		BIO_printf(bio_err, "Bad format specified for key\n");
+		goto end;
+		}
+
+	if (rv <= 0)
+		{
+		BIO_puts(bio_err, "Error writing key\n");
+		ERR_print_errors(bio_err);
+		}
+
+	if (text)
+		{
+		if (do_param)
+			rv = EVP_PKEY_print_params(out, pkey, 0, NULL);
+		else
+			rv = EVP_PKEY_print_private(out, pkey, 0, NULL);
+
+		if (rv <= 0)
+			{
+			BIO_puts(bio_err, "Error printing key\n");
+			ERR_print_errors(bio_err);
+			}
+		}
+
+	ret = 0;
+
+	end:
+	if (pkey)
+		EVP_PKEY_free(pkey);
+	if (ctx)
+		EVP_PKEY_CTX_free(ctx);
+	if (out)
+		BIO_free_all(out);
+	BIO_free(in);
+	if (pass)
+		OPENSSL_free(pass);
+
+	return ret;
+	}
+
+static int init_keygen_file(BIO *err, EVP_PKEY_CTX **pctx,
+				const char *file, ENGINE *e)
+	{
+	BIO *pbio;
+	EVP_PKEY *pkey = NULL;
+	EVP_PKEY_CTX *ctx = NULL;
+	if (*pctx)
+		{
+		BIO_puts(err, "Parameters already set!\n");
+		return 0;
+		}
+
+	pbio = BIO_new_file(file, "r");
+	if (!pbio)
+		{
+		BIO_printf(err, "Can't open parameter file %s\n", file);
+		return 0;
+		}
+
+	pkey = PEM_read_bio_Parameters(pbio, NULL);
+	BIO_free(pbio);
+
+	if (!pkey)
+		{
+		BIO_printf(bio_err, "Error reading parameter file %s\n", file);
+		return 0;
+		}
+
+	ctx = EVP_PKEY_CTX_new(pkey, e);
+	if (!ctx)
+		goto err;
+	if (EVP_PKEY_keygen_init(ctx) <= 0)
+		goto err;
+	EVP_PKEY_free(pkey);
+	*pctx = ctx;
+	return 1;
+
+	err:
+	BIO_puts(err, "Error initializing context\n");
+	ERR_print_errors(err);
+	if (ctx)
+		EVP_PKEY_CTX_free(ctx);
+	if (pkey)
+		EVP_PKEY_free(pkey);
+	return 0;
+
+	}
+
+int init_gen_str(BIO *err, EVP_PKEY_CTX **pctx,
+			const char *algname, ENGINE *e, int do_param)
+	{
+	EVP_PKEY_CTX *ctx = NULL;
+	const EVP_PKEY_ASN1_METHOD *ameth;
+	ENGINE *tmpeng = NULL;
+	int pkey_id;
+
+	if (*pctx)
+		{
+		BIO_puts(err, "Algorithm already set!\n");
+		return 0;
+		}
+
+	ameth = EVP_PKEY_asn1_find_str(&tmpeng, algname, -1);
+
+#ifndef OPENSSL_NO_ENGINE
+	if (!ameth && e)
+		ameth = ENGINE_get_pkey_asn1_meth_str(e, algname, -1);
+#endif
+
+	if (!ameth)
+		{
+		BIO_printf(bio_err, "Algorithm %s not found\n", algname);
+		return 0;
+		}
+
+	ERR_clear_error();
+
+	EVP_PKEY_asn1_get0_info(&pkey_id, NULL, NULL, NULL, NULL, ameth);
+#ifndef OPENSSL_NO_ENGINE
+	if (tmpeng)
+		ENGINE_finish(tmpeng);
+#endif
+	ctx = EVP_PKEY_CTX_new_id(pkey_id, e);
+
+	if (!ctx)
+		goto err;
+	if (do_param)
+		{
+		if (EVP_PKEY_paramgen_init(ctx) <= 0)
+			goto err;
+		}
+	else
+		{
+		if (EVP_PKEY_keygen_init(ctx) <= 0)
+			goto err;
+		}
+
+	*pctx = ctx;
+	return 1;
+
+	err:
+	BIO_printf(err, "Error initializing %s context\n", algname);
+	ERR_print_errors(err);
+	if (ctx)
+		EVP_PKEY_CTX_free(ctx);
+	return 0;
+
+	}
+
+static int genpkey_cb(EVP_PKEY_CTX *ctx)
+	{
+	char c='*';
+	BIO *b = EVP_PKEY_CTX_get_app_data(ctx);
+	int p;
+	p = EVP_PKEY_CTX_get_keygen_info(ctx, 0);
+	if (p == 0) c='.';
+	if (p == 1) c='+';
+	if (p == 2) c='*';
+	if (p == 3) c='\n';
+	BIO_write(b,&c,1);
+	(void)BIO_flush(b);
+#ifdef LINT
+	p=n;
+#endif
+	return 1;
+	}

apps/genrsa.c

@@ -56,48 +56,71 @@
  * [including the GNU Public Licence.]
  */
 
-#ifndef NO_RSA
+#include <openssl/opensslconf.h>
+/* Until the key-gen callbacks are modified to use newer prototypes, we allow
+ * deprecated functions for openssl-internal code */
+#ifdef OPENSSL_NO_DEPRECATED
+#undef OPENSSL_NO_DEPRECATED
+#endif
+
+#ifndef OPENSSL_NO_RSA
 #include <stdio.h>
 #include <string.h>
 #include <sys/types.h>
 #include <sys/stat.h>
 #include "apps.h"
 #include <openssl/bio.h>
-#include <openssl/rand.h>
 #include <openssl/err.h>
 #include <openssl/bn.h>
 #include <openssl/rsa.h>
 #include <openssl/evp.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
+#include <openssl/rand.h>
 
 #define DEFBITS	512
 #undef PROG
 #define PROG genrsa_main
 
-static void MS_CALLBACK genrsa_cb(int p, int n, void *arg);
-static long gr_load_rand(char *names);
+static int MS_CALLBACK genrsa_cb(int p, int n, BN_GENCB *cb);
+
+int MAIN(int, char **);
+
 int MAIN(int argc, char **argv)
 	{
+	BN_GENCB cb;
+#ifndef OPENSSL_NO_ENGINE
+	ENGINE *e = NULL;
+#endif
 	int ret=1;
-	char buffer[200];
-	RSA *rsa=NULL;
 	int i,num=DEFBITS;
-	long rnum=0,l;
-	EVP_CIPHER *enc=NULL;
+	long l;
+	const EVP_CIPHER *enc=NULL;
 	unsigned long f4=RSA_F4;
 	char *outfile=NULL;
-	char *inrand=NULL,*randfile;
+	char *passargout = NULL, *passout = NULL;
+#ifndef OPENSSL_NO_ENGINE
+	char *engine=NULL;
+#endif
+	char *inrand=NULL;
 	BIO *out=NULL;
+	BIGNUM *bn = BN_new();
+	RSA *rsa = NULL;
+
+	if(!bn) goto err;
 
 	apps_startup();
+	BN_GENCB_set(&cb, genrsa_cb, bio_err);
 
 	if (bio_err == NULL)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
+
+	if (!load_config(bio_err, NULL))
+		goto err;
 	if ((out=BIO_new(BIO_s_file())) == NULL)
 		{
-		BIO_printf(bio_err,"unable to creat BIO for output\n");
+		BIO_printf(bio_err,"unable to create BIO for output\n");
 		goto err;
 		}
 
@@ -113,23 +136,55 @@ int MAIN(int argc, char **argv)
 			}
 		else if (strcmp(*argv,"-3") == 0)
 			f4=3;
-		else if (strcmp(*argv,"-F4") == 0)
+		else if (strcmp(*argv,"-F4") == 0 || strcmp(*argv,"-f4") == 0)
 			f4=RSA_F4;
+#ifndef OPENSSL_NO_ENGINE
+		else if (strcmp(*argv,"-engine") == 0)
+			{
+			if (--argc < 1) goto bad;
+			engine= *(++argv);
+			}
+#endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
 			inrand= *(++argv);
 			}
-#ifndef NO_DES
+#ifndef OPENSSL_NO_DES
 		else if (strcmp(*argv,"-des") == 0)
 			enc=EVP_des_cbc();
 		else if (strcmp(*argv,"-des3") == 0)
 			enc=EVP_des_ede3_cbc();
 #endif
-#ifndef NO_IDEA
+#ifndef OPENSSL_NO_IDEA
 		else if (strcmp(*argv,"-idea") == 0)
 			enc=EVP_idea_cbc();
 #endif
+#ifndef OPENSSL_NO_SEED
+		else if (strcmp(*argv,"-seed") == 0)
+			enc=EVP_seed_cbc();
+#endif
+#ifndef OPENSSL_NO_AES
+		else if (strcmp(*argv,"-aes128") == 0)
+			enc=EVP_aes_128_cbc();
+		else if (strcmp(*argv,"-aes192") == 0)
+			enc=EVP_aes_192_cbc();
+		else if (strcmp(*argv,"-aes256") == 0)
+			enc=EVP_aes_256_cbc();
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+		else if (strcmp(*argv,"-camellia128") == 0)
+			enc=EVP_camellia_128_cbc();
+		else if (strcmp(*argv,"-camellia192") == 0)
+			enc=EVP_camellia_192_cbc();
+		else if (strcmp(*argv,"-camellia256") == 0)
+			enc=EVP_camellia_256_cbc();
+#endif
+		else if (strcmp(*argv,"-passout") == 0)
+			{
+			if (--argc < 1) goto bad;
+			passargout= *(++argv);
+			}
 		else
 			break;
 		argv++;
@@ -139,23 +194,57 @@ int MAIN(int argc, char **argv)
 		{
 bad:
 		BIO_printf(bio_err,"usage: genrsa [args] [numbits]\n");
-		BIO_printf(bio_err," -des      - encrypt the generated key with DES in cbc mode\n");
-		BIO_printf(bio_err," -des3     - encrypt the generated key with DES in ede cbc mode (168 bit key)\n");
-#ifndef NO_IDEA
-		BIO_printf(bio_err," -idea     - encrypt the generated key with IDEA in cbc mode\n");
+		BIO_printf(bio_err," -des            encrypt the generated key with DES in cbc mode\n");
+		BIO_printf(bio_err," -des3           encrypt the generated key with DES in ede cbc mode (168 bit key)\n");
+#ifndef OPENSSL_NO_IDEA
+		BIO_printf(bio_err," -idea           encrypt the generated key with IDEA in cbc mode\n");
 #endif
-		BIO_printf(bio_err," -out file - output the key to 'file\n");
-		BIO_printf(bio_err," -f4       - use F4 (0x10001) for the E value\n");
-		BIO_printf(bio_err," -3        - use 3 for the E value\n");
-		BIO_printf(bio_err," -rand file:file:...\n");
-		BIO_printf(bio_err,"           - load the file (or the files in the directory) into\n");
-		BIO_printf(bio_err,"             the random number generator\n");
+#ifndef OPENSSL_NO_SEED
+		BIO_printf(bio_err," -seed\n");
+		BIO_printf(bio_err,"                 encrypt PEM output with cbc seed\n");
+#endif
+#ifndef OPENSSL_NO_AES
+		BIO_printf(bio_err," -aes128, -aes192, -aes256\n");
+		BIO_printf(bio_err,"                 encrypt PEM output with cbc aes\n");
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+		BIO_printf(bio_err," -camellia128, -camellia192, -camellia256\n");
+		BIO_printf(bio_err,"                 encrypt PEM output with cbc camellia\n");
+#endif
+		BIO_printf(bio_err," -out file       output the key to 'file\n");
+		BIO_printf(bio_err," -passout arg    output file pass phrase source\n");
+		BIO_printf(bio_err," -f4             use F4 (0x10001) for the E value\n");
+		BIO_printf(bio_err," -3              use 3 for the E value\n");
+#ifndef OPENSSL_NO_ENGINE
+		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
+#endif
+		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
+		BIO_printf(bio_err,"                 load the file (or the files in the directory) into\n");
+		BIO_printf(bio_err,"                 the random number generator\n");
 		goto err;
 		}
 		
 	ERR_load_crypto_strings();
+
+	if(!app_passwd(bio_err, NULL, passargout, NULL, &passout)) {
+		BIO_printf(bio_err, "Error getting password\n");
+		goto err;
+	}
+
+#ifndef OPENSSL_NO_ENGINE
+        e = setup_engine(bio_err, engine, 0);
+#endif
+
 	if (outfile == NULL)
+		{
 		BIO_set_fp(out,stdout,BIO_NOCLOSE);
+#ifdef OPENSSL_SYS_VMS
+		{
+		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+		out = BIO_push(tmpbio, out);
+		}
+#endif
+		}
 	else
 		{
 		if (BIO_write_filename(out,outfile) <= 0)
@@ -165,45 +254,31 @@ bad:
 			}
 		}
 
-#ifdef WINDOWS
-	BIO_printf(bio_err,"Loading 'screen' into random state -");
-	BIO_flush(bio_err);
-	RAND_screen();
-	BIO_printf(bio_err," done\n");
-#endif
-	randfile=RAND_file_name(buffer,200);
-	if ((randfile == NULL) ||
-		 !(rnum=(long)RAND_load_file(randfile,1024L*1024L)))
+	if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL
+		&& !RAND_status())
 		{
-		BIO_printf(bio_err,"unable to load 'random state'\n");
+		BIO_printf(bio_err,"warning, not much extra random data, consider using the -rand option\n");
 		}
-
-	if (inrand == NULL)
-		{
-		if (rnum == 0)
-			{
-			BIO_printf(bio_err,"warning, not much extra random data, consider using the -rand option\n");
-			}
-		}
-	else
-		{
-		rnum+=gr_load_rand(inrand);
-		}
-	if (rnum != 0)
-		BIO_printf(bio_err,"%ld semi-random bytes loaded\n",rnum);
+	if (inrand != NULL)
+		BIO_printf(bio_err,"%ld semi-random bytes loaded\n",
+			app_RAND_load_files(inrand));
 
 	BIO_printf(bio_err,"Generating RSA private key, %d bit long modulus\n",
 		num);
-	rsa=RSA_generate_key(num,f4,genrsa_cb,bio_err);
-		
-	if (randfile == NULL)
-		BIO_printf(bio_err,"unable to write 'random state'\n");
-	else
-		RAND_write_file(randfile);
+#ifdef OPENSSL_NO_ENGINE
+	rsa = RSA_new();
+#else
+	rsa = RSA_new_method(e);
+#endif
+	if (!rsa)
+		goto err;
 
-	if (rsa == NULL) goto err;
-	
-	/* We need to do the folloing for when the base number size is <
+	if(!BN_set_word(bn, f4) || !RSA_generate_key_ex(rsa, num, bn, &cb))
+		goto err;
+		
+	app_RAND_write_file(NULL, bio_err);
+
+	/* We need to do the following for when the base number size is <
 	 * long, esp windows 3.1 :-(. */
 	l=0L;
 	for (i=0; i<rsa->e->top; i++)
@@ -215,19 +290,28 @@ bad:
 		l+=rsa->e->d[i];
 		}
 	BIO_printf(bio_err,"e is %ld (0x%lX)\n",l,l);
-	if (!PEM_write_bio_RSAPrivateKey(out,rsa,enc,NULL,0,NULL,NULL))
+	{
+	PW_CB_DATA cb_data;
+	cb_data.password = passout;
+	cb_data.prompt_info = outfile;
+	if (!PEM_write_bio_RSAPrivateKey(out,rsa,enc,NULL,0,
+		(pem_password_cb *)password_callback,&cb_data))
 		goto err;
+	}
 
 	ret=0;
 err:
-	if (rsa != NULL) RSA_free(rsa);
-	if (out != NULL) BIO_free(out);
+	if (bn) BN_free(bn);
+	if (rsa) RSA_free(rsa);
+	if (out) BIO_free_all(out);
+	if(passout) OPENSSL_free(passout);
 	if (ret != 0)
 		ERR_print_errors(bio_err);
-	EXIT(ret);
+	apps_shutdown();
+	OPENSSL_EXIT(ret);
 	}
 
-static void MS_CALLBACK genrsa_cb(int p, int n, void *arg)
+static int MS_CALLBACK genrsa_cb(int p, int n, BN_GENCB *cb)
 	{
 	char c='*';
 
@@ -235,32 +319,17 @@ static void MS_CALLBACK genrsa_cb(int p, int n, void *arg)
 	if (p == 1) c='+';
 	if (p == 2) c='*';
 	if (p == 3) c='\n';
-	BIO_write((BIO *)arg,&c,1);
-	(void)BIO_flush((BIO *)arg);
+	BIO_write(cb->arg,&c,1);
+	(void)BIO_flush(cb->arg);
 #ifdef LINT
 	p=n;
 #endif
+	return 1;
 	}
+#else /* !OPENSSL_NO_RSA */
 
-static long gr_load_rand(char *name)
-	{
-	char *p,*n;
-	int last;
-	long tot=0;
+# if PEDANTIC
+static void *dummy=&dummy;
+# endif
 
-	for (;;)
-		{
-		last=0;
-		for (p=name; ((*p != '\0') && (*p != LIST_SEPARATOR_CHAR)); p++);
-		if (*p == '\0') last=1;
-		*p='\0';
-		n=name;
-		name=p+1;
-		if (*n == '\0') break;
-
-		tot+=RAND_load_file(n,1024L*1024L);
-		if (last) break;
-		}
-	return(tot);
-	}
 #endif

apps/install-apps.com

@@ -0,0 +1,107 @@
+$! INSTALL.COM -- Installs the files in a given directory tree
+$!
+$! Author: Richard Levitte <richard@levitte.org>
+$! Time of creation: 22-MAY-1998 10:13
+$!
+$! P1  root of the directory tree
+$! P2  "64" for 64-bit pointers.
+$!
+$!
+$! Announce/identify.
+$!
+$ proc = f$environment( "procedure")
+$ write sys$output "@@@ "+ -
+   f$parse( proc, , , "name")+ f$parse( proc, , , "type")
+$!
+$ on error then goto tidy
+$ on control_c then goto tidy
+$!
+$ if (p1 .eqs. "")
+$ then
+$   write sys$output "First argument missing."
+$   write sys$output -
+     "It should be the directory where you want things installed."
+$   exit
+$ endif
+$!
+$ if (f$getsyi("cpu") .lt. 128)
+$ then
+$   arch = "VAX"
+$ else
+$   arch = f$edit( f$getsyi( "arch_name"), "upcase")
+$   if (arch .eqs. "") then arch = "UNK"
+$ endif
+$!
+$ archd = arch
+$!
+$ if (p2 .nes. "")
+$ then
+$   if (p2 .eqs. "64")
+$   then
+$     archd = arch+ "_64"
+$   else
+$     if (p2 .nes. "32")
+$     then
+$       write sys$output "Second argument invalid."
+$       write sys$output "It should be "32", "64", or nothing."
+$       exit
+$     endif
+$   endif
+$ endif
+$!
+$ root = f$parse( p1, "[]A.;0", , , "syntax_only, no_conceal") - "A.;0"
+$ root_dev = f$parse(root,,,"device","syntax_only")
+$ root_dir = f$parse(root,,,"directory","syntax_only") - -
+   "[000000." - "][" - "[" - "]"
+$ root = root_dev + "[" + root_dir
+$!
+$ define /nolog wrk_sslroot 'root'.] /trans=conc
+$ define /nolog wrk_sslxexe wrk_sslroot:['archd'_exe]
+$!
+$ if f$parse("wrk_sslroot:[000000]") .eqs. "" then -
+   create /directory /log wrk_sslroot:[000000]
+$ if f$parse("wrk_sslxexe:") .eqs. "" then -
+   create /directory /log wrk_sslxexe:
+$!
+$ exe := openssl
+$!
+$ exe_dir := [-.'archd'.exe.apps]
+$!
+$! Executables.
+$!
+$ i = 0
+$ loop_exe:
+$   e = f$edit(f$element( i, ",", exe), "trim")
+$   i = i + 1
+$   if e .eqs. "," then goto loop_exe_end
+$   set noon
+$   file = exe_dir+ e+ ".exe"
+$   if f$search( file) .nes. ""
+$   then
+$     copy /protection = w:re 'file' wrk_sslxexe: /log
+$   endif
+$   set on
+$ goto loop_exe
+$ loop_exe_end:
+$!
+$! Miscellaneous.
+$!
+$ set noon
+$ copy /protection = w:re ca.com wrk_sslxexe:ca.com /log
+$ copy /protection = w:re openssl-vms.cnf wrk_sslroot:[000000]openssl.cnf /log
+$ set on
+$!
+$ tidy:
+$!
+$ call deass wrk_sslroot
+$ call deass wrk_sslxexe
+$!
+$ exit
+$!
+$ deass: subroutine
+$ if (f$trnlnm( p1, "LNM$PROCESS") .nes. "")
+$ then
+$   deassign /process 'p1'
+$ endif
+$ endsubroutine
+$!

apps/install.com

@@ -1,69 +0,0 @@
-$! INSTALL.COM -- Installs the files in a given directory tree
-$!
-$! Author: Richard Levitte <richard@levitte.org>
-$! Time of creation: 22-MAY-1998 10:13
-$!
-$! P1	root of the directory tree
-$!
-$	IF P1 .EQS. ""
-$	THEN
-$	    WRITE SYS$OUTPUT "First argument missing."
-$	    WRITE SYS$OUTPUT "Should be the directory where you want things installed."
-$	    EXIT
-$	ENDIF
-$
-$	ROOT = F$PARSE(P1,"[]A.;0",,,"SYNTAX_ONLY,NO_CONCEAL") - "A.;0"
-$	ROOT_DEV = F$PARSE(ROOT,,,"DEVICE","SYNTAX_ONLY")
-$	ROOT_DIR = F$PARSE(ROOT,,,"DIRECTORY","SYNTAX_ONLY") -
-		   - "[000000." - "][" - "[" - "]"
-$	ROOT = ROOT_DEV + "[" + ROOT_DIR
-$
-$	DEFINE/NOLOG WRK_SSLROOT 'ROOT'.] /TRANS=CONC
-$	DEFINE/NOLOG WRK_SSLVEXE WRK_SSLROOT:[VAX_EXE]
-$	DEFINE/NOLOG WRK_SSLAEXE WRK_SSLROOT:[ALPHA_EXE]
-$	DEFINE/NOLOG WRK_SSLLIB WRK_SSLROOT:[LIB]
-$
-$	IF F$PARSE("WRK_SSLROOT:[000000]") .EQS. "" THEN -
-	   CREATE/DIR/LOG WRK_SSLROOT:[000000]
-$	IF F$PARSE("WRK_SSLVEXE:") .EQS. "" THEN -
-	   CREATE/DIR/LOG WRK_SSLVEXE:
-$	IF F$PARSE("WRK_SSLAEXE:") .EQS. "" THEN -
-	   CREATE/DIR/LOG WRK_SSLAEXE:
-$	IF F$PARSE("WRK_SSLLIB:") .EQS. "" THEN -
-	   CREATE/DIR/LOG WRK_SSLLIB:
-$
-$	EXE := openssl
-$
-$	VEXE_DIR := [-.VAX.EXE.APPS]
-$	AEXE_DIR := [-.AXP.EXE.APPS]
-$
-$	I = 0
-$ LOOP_EXE: 
-$	E = F$EDIT(F$ELEMENT(I, ",", EXE),"TRIM")
-$	I = I + 1
-$	IF E .EQS. "," THEN GOTO LOOP_EXE_END
-$	SET NOON
-$	IF F$SEARCH(VEXE_DIR+E+".EXE") .NES. ""
-$	THEN
-$	  COPY 'VEXE_DIR''E'.EXE WRK_SSLVEXE:'E'.EXE/log
-$	  SET FILE/PROT=W:RE WRK_SSLVEXE:'E'.EXE
-$	ENDIF
-$	IF F$SEARCH(AEXE_DIR+E+".EXE") .NES. ""
-$	THEN
-$	  COPY 'AEXE_DIR''E'.EXE WRK_SSLAEXE:'E'.EXE/log
-$	  SET FILE/PROT=W:RE WRK_SSLAEXE:'E'.EXE
-$	ENDIF
-$	SET ON
-$	GOTO LOOP_EXE
-$ LOOP_EXE_END:
-$
-$	SET NOON
-$	COPY CA.COM WRK_SSLAEXE:CA.COM/LOG
-$	SET FILE/PROT=W:RE WRK_SSLAEXE:CA.COM
-$	COPY CA.COM WRK_SSLVEXE:CA.COM/LOG
-$	SET FILE/PROT=W:RE WRK_SSLVEXE:CA.COM
-$	COPY OPENSSL-VMS.CNF WRK_SSLROOT:[000000]OPENSSL.CNF/LOG
-$	SET FILE/PROT=W:R WRK_SSLROOT:[000000]OPENSSL.CNF
-$	SET ON
-$
-$	EXIT

apps/nseq.c

@@ -1,5 +1,5 @@
 /* nseq.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
+/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
  * project 1999.
  */
 /* ====================================================================
@@ -58,14 +58,14 @@
 
 #include <stdio.h>
 #include <string.h>
+#include "apps.h"
 #include <openssl/pem.h>
 #include <openssl/err.h>
-#include "apps.h"
 
 #undef PROG
 #define PROG nseq_main
 
-static int dump_cert_text(BIO *out, X509 *x);
+int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 {
@@ -102,7 +102,7 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-in file  input file\n");
 		BIO_printf (bio_err, "-out file output file\n");
 		BIO_printf (bio_err, "-toseq    output NS Sequence file\n");
-		EXIT(1);
+		OPENSSL_EXIT(1);
 	}
 
 	if (infile) {
@@ -119,11 +119,18 @@ int MAIN(int argc, char **argv)
 				 "Can't open output file %s\n", outfile);
 			goto end;
 		}
-	} else out = BIO_new_fp(stdout, BIO_NOCLOSE);
-
+	} else {
+		out = BIO_new_fp(stdout, BIO_NOCLOSE);
+#ifdef OPENSSL_SYS_VMS
+		{
+		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+		out = BIO_push(tmpbio, out);
+		}
+#endif
+	}
 	if (toseq) {
 		seq = NETSCAPE_CERT_SEQUENCE_new();
-		seq->certs = sk_X509_new(NULL);
+		seq->certs = sk_X509_new_null();
 		while((x509 = PEM_read_bio_X509(in, NULL, NULL, NULL))) 
 		    sk_X509_push(seq->certs,x509);
 
@@ -152,23 +159,9 @@ int MAIN(int argc, char **argv)
 	ret = 0;
 end:
 	BIO_free(in);
-	BIO_free(out);
+	BIO_free_all(out);
 	NETSCAPE_CERT_SEQUENCE_free(seq);
 
-	EXIT(ret);
-}
-
-static int dump_cert_text(BIO *out, X509 *x)
-{
-	char buf[256];
-	X509_NAME_oneline(X509_get_subject_name(x),buf,256);
-	BIO_puts(out,"subject=");
-	BIO_puts(out,buf);
-
-	X509_NAME_oneline(X509_get_issuer_name(x),buf,256);
-	BIO_puts(out,"\nissuer= ");
-	BIO_puts(out,buf);
-	BIO_puts(out,"\n");
-	return 0;
+	OPENSSL_EXIT(ret);
 }
 

apps/openssl-vms.cnf

@@ -3,8 +3,13 @@
 # This is mostly being used for generation of certificate requests.
 #
 
+# This definition stops the following lines choking if HOME isn't
+# defined.
+HOME			= .
 RANDFILE		= $ENV::HOME/.rnd
-oid_file		= $ENV::HOME/.oid
+
+# Extra OBJECT IDENTIFIER info:
+#oid_file		= $ENV::HOME/.oid
 oid_section		= new_oids
 
 # To use this configuration file with the "-extfile" option of the
@@ -16,12 +21,17 @@ oid_section		= new_oids
 
 [ new_oids ]
 
-# We can add new OIDs in here for use by 'ca' and 'req'.
+# We can add new OIDs in here for use by 'ca', 'req' and 'ts'.
 # Add a simple OID like this:
 # testoid1=1.2.3.4
 # Or use config file substitution like this:
 # testoid2=${testoid1}.5.6
 
+# Policies used by the TSA examples.
+tsa_policy1 = 1.2.3.4.1
+tsa_policy2 = 1.2.3.4.5.6
+tsa_policy3 = 1.2.3.4.5.7
+
 ####################################################################
 [ ca ]
 default_ca	= CA_default		# The default ca section
@@ -29,27 +39,40 @@ default_ca	= CA_default		# The default ca section
 ####################################################################
 [ CA_default ]
 
-dir		= sys\$disk:[.demoCA	# Where everything is kept
+dir		= sys\$disk:[.demoCA		# Where everything is kept
 certs		= $dir.certs]		# Where the issued certs are kept
 crl_dir		= $dir.crl]		# Where the issued crl are kept
 database	= $dir]index.txt	# database index file.
-new_certs_dir	= $dir.newcerts]	# default place for new certs.
+#unique_subject	= no			# Set to 'no' to allow creation of
+					# several ctificates with same subject.
+new_certs_dir	= $dir.newcerts]		# default place for new certs.
 
 certificate	= $dir]cacert.pem 	# The CA certificate
-serial		= $dir]serial.		# The current serial number
+serial		= $dir]serial. 		# The current serial number
+crlnumber	= $dir]crlnumber.	# the current crl number
+					# must be commented out to leave a V1 CRL
 crl		= $dir]crl.pem 		# The current CRL
 private_key	= $dir.private]cakey.pem# The private key
 RANDFILE	= $dir.private].rand	# private random number file
 
 x509_extensions	= usr_cert		# The extentions to add to the cert
 
+# Comment out the following two lines for the "traditional"
+# (and highly broken) format.
+name_opt 	= ca_default		# Subject Name options
+cert_opt 	= ca_default		# Certificate field options
+
+# Extension copying option: use with caution.
+# copy_extensions = copy
+
 # Extensions to add to a CRL. Note: Netscape communicator chokes on V2 CRLs
 # so this is commented out by default to leave a V1 CRL.
+# crlnumber must also be commented out to leave a V1 CRL.
 # crl_extensions	= crl_ext
 
 default_days	= 365			# how long to certify for
 default_crl_days= 30			# how long before next CRL
-default_md	= md5			# which md to use.
+default_md	= default		# use public key default MD
 preserve	= no			# keep passed DN ordering
 
 # A few difference way of specifying how similar the request should look
@@ -86,6 +109,21 @@ distinguished_name	= req_distinguished_name
 attributes		= req_attributes
 x509_extensions	= v3_ca	# The extentions to add to the self signed cert
 
+# Passwords for private keys if not present they will be prompted for
+# input_password = secret
+# output_password = secret
+
+# This sets a mask for permitted string types. There are several options. 
+# default: PrintableString, T61String, BMPString.
+# pkix	 : PrintableString, BMPString (PKIX recommendation before 2004)
+# utf8only: only UTF8Strings (PKIX recommendation after 2004).
+# nombstr : PrintableString, T61String (no BMPStrings or UTF8Strings).
+# MASK:XXXX a literal mask value.
+# WARNING: ancient versions of Netscape crash on BMPStrings or UTF8Strings.
+string_mask = utf8only
+
+# req_extensions = v3_req # The extensions to add to a certificate request
+
 [ req_distinguished_name ]
 countryName			= Country Name (2 letter code)
 countryName_default		= AU
@@ -107,11 +145,11 @@ localityName			= Locality Name (eg, city)
 organizationalUnitName		= Organizational Unit Name (eg, section)
 #organizationalUnitName_default	=
 
-commonName			= Common Name (eg, YOUR name)
+commonName			= Common Name (e.g. server FQDN or YOUR name)
 commonName_max			= 64
 
 emailAddress			= Email Address
-emailAddress_max		= 40
+emailAddress_max		= 64
 
 # SET-ex3			= SET extension number 3
 
@@ -154,11 +192,14 @@ nsComment			= "OpenSSL Generated Certificate"
 
 # PKIX recommendations harmless if included in all certificates.
 subjectKeyIdentifier=hash
-authorityKeyIdentifier=keyid,issuer:always
+authorityKeyIdentifier=keyid,issuer
 
 # This stuff is for subjectAltName and issuerAltname.
 # Import the email address.
 # subjectAltName=email:copy
+# An alternative to produce certificates that aren't
+# deprecated according to PKIX.
+# subjectAltName=email:move
 
 # Copy subject details
 # issuerAltName=issuer:copy
@@ -170,7 +211,18 @@ authorityKeyIdentifier=keyid,issuer:always
 #nsCaPolicyUrl
 #nsSslServerName
 
-[ v3_ca]
+# This is required for TSA certificates.
+# extendedKeyUsage = critical,timeStamping
+
+[ v3_req ]
+
+# Extensions to add to a certificate request
+
+basicConstraints = CA:FALSE
+keyUsage = nonRepudiation, digitalSignature, keyEncipherment
+
+[ v3_ca ]
+
 
 # Extensions for a typical CA
 
@@ -179,7 +231,7 @@ authorityKeyIdentifier=keyid,issuer:always
 
 subjectKeyIdentifier=hash
 
-authorityKeyIdentifier=keyid:always,issuer:always
+authorityKeyIdentifier=keyid:always,issuer
 
 # This is what PKIX recommends but some broken software chokes on critical
 # extensions.
@@ -200,10 +252,11 @@ basicConstraints = CA:true
 # Copy issuer details
 # issuerAltName=issuer:copy
 
-# RAW DER hex encoding of an extension: beware experts only!
-# 1.2.3.5=RAW:02:03
+# DER hex encoding of an extension: beware experts only!
+# obj=DER:02:03
+# Where 'obj' is a standard or added object
 # You can even override a supported extension:
-# basicConstraints= critical, RAW:30:03:01:01:FF
+# basicConstraints= critical, DER:30:03:01:01:FF
 
 [ crl_ext ]
 
@@ -211,4 +264,87 @@ basicConstraints = CA:true
 # Only issuerAltName and authorityKeyIdentifier make any sense in a CRL.
 
 # issuerAltName=issuer:copy
-authorityKeyIdentifier=keyid:always,issuer:always
+authorityKeyIdentifier=keyid:always
+
+[ proxy_cert_ext ]
+# These extensions should be added when creating a proxy certificate
+
+# This goes against PKIX guidelines but some CAs do it and some software
+# requires this to avoid interpreting an end user certificate as a CA.
+
+basicConstraints=CA:FALSE
+
+# Here are some examples of the usage of nsCertType. If it is omitted
+# the certificate can be used for anything *except* object signing.
+
+# This is OK for an SSL server.
+# nsCertType			= server
+
+# For an object signing certificate this would be used.
+# nsCertType = objsign
+
+# For normal client use this is typical
+# nsCertType = client, email
+
+# and for everything including object signing:
+# nsCertType = client, email, objsign
+
+# This is typical in keyUsage for a client certificate.
+# keyUsage = nonRepudiation, digitalSignature, keyEncipherment
+
+# This will be displayed in Netscape's comment listbox.
+nsComment			= "OpenSSL Generated Certificate"
+
+# PKIX recommendations harmless if included in all certificates.
+subjectKeyIdentifier=hash
+authorityKeyIdentifier=keyid,issuer
+
+# This stuff is for subjectAltName and issuerAltname.
+# Import the email address.
+# subjectAltName=email:copy
+# An alternative to produce certificates that aren't
+# deprecated according to PKIX.
+# subjectAltName=email:move
+
+# Copy subject details
+# issuerAltName=issuer:copy
+
+#nsCaRevocationUrl		= http://www.domain.dom/ca-crl.pem
+#nsBaseUrl
+#nsRevocationUrl
+#nsRenewalUrl
+#nsCaPolicyUrl
+#nsSslServerName
+
+# This really needs to be in place for it to be a proxy certificate.
+proxyCertInfo=critical,language:id-ppl-anyLanguage,pathlen:3,policy:foo
+
+####################################################################
+[ tsa ]
+
+default_tsa = tsa_config1	# the default TSA section
+
+[ tsa_config1 ]
+
+# These are used by the TSA reply generation only.
+dir		= sys\$disk:[.demoCA		# TSA root directory
+serial		= $dir]tsaserial.	# The current serial number (mandatory)
+crypto_device	= builtin		# OpenSSL engine to use for signing
+signer_cert	= $dir/tsacert.pem 	# The TSA signing certificate
+					# (optional)
+certs		= $dir.cacert.pem]	# Certificate chain to include in reply
+					# (optional)
+signer_key	= $dir/private/tsakey.pem # The TSA private key (optional)
+
+default_policy	= tsa_policy1		# Policy if request did not specify it
+					# (optional)
+other_policies	= tsa_policy2, tsa_policy3	# acceptable policies (optional)
+digests		= md5, sha1		# Acceptable message digests (mandatory)
+accuracy	= secs:1, millisecs:500, microsecs:100	# (optional)
+clock_precision_digits  = 0	# number of digits after dot. (optional)
+ordering		= yes	# Is ordering defined for timestamps?
+				# (optional, default: no)
+tsa_name		= yes	# Must the TSA name be included in the reply?
+				# (optional, default: no)
+ess_cert_id_chain	= no	# Must the ESS cert id chain be included?
+				# (optional, default: no)

apps/openssl.c

@@ -55,14 +55,66 @@
  * copied and put under another distribution licence
  * [including the GNU Public Licence.]
  */
+/* ====================================================================
+ * Copyright (c) 1998-2006 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
 
-#ifndef DEBUG
-#undef DEBUG
-#endif
 
 #include <stdio.h>
 #include <string.h>
 #include <stdlib.h>
+#define OPENSSL_C /* tells apps.h to use complete apps_startup() */
+#include "apps.h"
 #include <openssl/bio.h>
 #include <openssl/crypto.h>
 #include <openssl/lhash.h>
@@ -70,102 +122,233 @@
 #include <openssl/x509.h>
 #include <openssl/pem.h>
 #include <openssl/ssl.h>
-#define SSLEAY	/* turn off a few special case MONOLITH macros */
+#ifndef OPENSSL_NO_ENGINE
+#include <openssl/engine.h>
+#endif
 #define USE_SOCKETS /* needed for the _O_BINARY defs in the MS world */
-#define SSLEAY_SRC
-#include "apps.h"
+#include "progs.h"
 #include "s_apps.h"
 #include <openssl/err.h>
 
-/*
-#ifdef WINDOWS
-#include "bss_file.c"
-#endif
-*/
+/* The LHASH callbacks ("hash" & "cmp") have been replaced by functions with the
+ * base prototypes (we cast each variable inside the function to the required
+ * type of "FUNCTION*"). This removes the necessity for macro-generated wrapper
+ * functions. */
 
-static unsigned long MS_CALLBACK hash(FUNCTION *a);
-static int MS_CALLBACK cmp(FUNCTION *a,FUNCTION *b);
-static LHASH *prog_init(void );
-static int do_cmd(LHASH *prog,int argc,char *argv[]);
-LHASH *config=NULL;
+static LHASH_OF(FUNCTION) *prog_init(void );
+static int do_cmd(LHASH_OF(FUNCTION) *prog,int argc,char *argv[]);
+static void list_pkey(BIO *out);
+static void list_cipher(BIO *out);
+static void list_md(BIO *out);
 char *default_config_file=NULL;
 
-#ifdef DEBUG
-static void sig_stop(int i)
-	{
-	char *a=NULL;
-
-	*a='\0';
-	}
-#endif
-
 /* Make sure there is only one when MONOLITH is defined */
 #ifdef MONOLITH
+CONF *config=NULL;
 BIO *bio_err=NULL;
 #endif
 
-int main(int Argc, char *Argv[])
+
+static void lock_dbg_cb(int mode, int type, const char *file, int line)
+	{
+	static int modes[CRYPTO_NUM_LOCKS]; /* = {0, 0, ... } */
+	const char *errstr = NULL;
+	int rw;
+	
+	rw = mode & (CRYPTO_READ|CRYPTO_WRITE);
+	if (!((rw == CRYPTO_READ) || (rw == CRYPTO_WRITE)))
+		{
+		errstr = "invalid mode";
+		goto err;
+		}
+
+	if (type < 0 || type >= CRYPTO_NUM_LOCKS)
+		{
+		errstr = "type out of bounds";
+		goto err;
+		}
+
+	if (mode & CRYPTO_LOCK)
+		{
+		if (modes[type])
+			{
+			errstr = "already locked";
+			/* must not happen in a single-threaded program
+			 * (would deadlock) */
+			goto err;
+			}
+
+		modes[type] = rw;
+		}
+	else if (mode & CRYPTO_UNLOCK)
+		{
+		if (!modes[type])
+			{
+			errstr = "not locked";
+			goto err;
+			}
+		
+		if (modes[type] != rw)
+			{
+			errstr = (rw == CRYPTO_READ) ?
+				"CRYPTO_r_unlock on write lock" :
+				"CRYPTO_w_unlock on read lock";
+			}
+
+		modes[type] = 0;
+		}
+	else
+		{
+		errstr = "invalid mode";
+		goto err;
+		}
+
+ err:
+	if (errstr)
+		{
+		/* we cannot use bio_err here */
+		fprintf(stderr, "openssl (lock_dbg_cb): %s (mode=%d, type=%d) at %s:%d\n",
+			errstr, mode, type, file, line);
+		}
+	}
+
+#if defined( OPENSSL_SYS_VMS) && (__INITIAL_POINTER_SIZE == 64)
+# define ARGV _Argv
+#else
+# define ARGV Argv
+#endif
+
+int main(int Argc, char *ARGV[])
 	{
 	ARGS arg;
-#define PROG_NAME_SIZE	16
-	char pname[PROG_NAME_SIZE];
+#define PROG_NAME_SIZE	39
+	char pname[PROG_NAME_SIZE+1];
 	FUNCTION f,*fp;
-	MS_STATIC char *prompt,buf[1024],config_name[256];
+	MS_STATIC const char *prompt;
+	MS_STATIC char buf[1024];
+	char *to_free=NULL;
 	int n,i,ret=0;
 	int argc;
 	char **argv,*p;
-	LHASH *prog=NULL;
+	LHASH_OF(FUNCTION) *prog=NULL;
 	long errline;
- 
+
+#if defined( OPENSSL_SYS_VMS) && (__INITIAL_POINTER_SIZE == 64)
+	/* 2011-03-22 SMS.
+	 * If we have 32-bit pointers everywhere, then we're safe, and
+	 * we bypass this mess, as on non-VMS systems.  (See ARGV,
+	 * above.)
+	 * Problem 1: Compaq/HP C before V7.3 always used 32-bit
+	 * pointers for argv[].
+	 * Fix 1: For a 32-bit argv[], when we're using 64-bit pointers
+	 * everywhere else, we always allocate and use a 64-bit
+	 * duplicate of argv[].
+	 * Problem 2: Compaq/HP C V7.3 (Alpha, IA64) before ECO1 failed
+	 * to NULL-terminate a 64-bit argv[].  (As this was written, the
+	 * compiler ECO was available only on IA64.)
+	 * Fix 2: Unless advised not to (VMS_TRUST_ARGV), we test a
+	 * 64-bit argv[argc] for NULL, and, if necessary, use a
+	 * (properly) NULL-terminated (64-bit) duplicate of argv[].
+	 * The same code is used in either case to duplicate argv[].
+	 * Some of these decisions could be handled in preprocessing,
+	 * but the code tends to get even uglier, and the penalty for
+	 * deciding at compile- or run-time is tiny.
+	 */
+	char **Argv = NULL;
+	int free_Argv = 0;
+
+	if ((sizeof( _Argv) < 8)        /* 32-bit argv[]. */
+# if !defined( VMS_TRUST_ARGV)
+	 || (_Argv[ Argc] != NULL)      /* Untrusted argv[argc] not NULL. */
+# endif
+		)
+		{
+		int i;
+		Argv = OPENSSL_malloc( (Argc+ 1)* sizeof( char *));
+		if (Argv == NULL)
+			{ ret = -1; goto end; }
+		for(i = 0; i < Argc; i++)
+			Argv[i] = _Argv[i];
+		Argv[ Argc] = NULL;     /* Certain NULL termination. */
+		free_Argv = 1;
+		}
+	else
+		{
+		/* Use the known-good 32-bit argv[] (which needs the
+		 * type cast to satisfy the compiler), or the trusted or
+		 * tested-good 64-bit argv[] as-is. */
+		Argv = (char **)_Argv;
+		}
+#endif /* defined( OPENSSL_SYS_VMS) && (__INITIAL_POINTER_SIZE == 64) */
+
 	arg.data=NULL;
 	arg.count=0;
 
-	/* SSLeay_add_ssl_algorithms(); is called in apps_startup() */
-	apps_startup();
-
-#if defined(DEBUG) && !defined(WINDOWS) && !defined(MSDOS)
-#ifdef SIGBUS
-	signal(SIGBUS,sig_stop);
-#endif
-#ifdef SIGSEGV
-	signal(SIGSEGV,sig_stop);
-#endif
-#endif
-
 	if (bio_err == NULL)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
+	if (getenv("OPENSSL_DEBUG_MEMORY") != NULL) /* if not defined, use compiled-in library defaults */
+		{
+		if (!(0 == strcmp(getenv("OPENSSL_DEBUG_MEMORY"), "off")))
+			{
+			CRYPTO_malloc_debug_init();
+			CRYPTO_set_mem_debug_options(V_CRYPTO_MDEBUG_ALL);
+			}
+		else
+			{
+			/* OPENSSL_DEBUG_MEMORY=off */
+			CRYPTO_set_mem_debug_functions(0, 0, 0, 0, 0);
+			}
+		}
 	CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON);
 
-	ERR_load_crypto_strings();
+#if 0
+	if (getenv("OPENSSL_DEBUG_LOCKING") != NULL)
+#endif
+		{
+		CRYPTO_set_locking_callback(lock_dbg_cb);
+		}
+
+	apps_startup();
 
 	/* Lets load up our environment a little */
 	p=getenv("OPENSSL_CONF");
 	if (p == NULL)
 		p=getenv("SSLEAY_CONF");
 	if (p == NULL)
-		{
-		strcpy(config_name,X509_get_default_cert_area());
-#ifndef VMS
-		strcat(config_name,"/");
-#endif
-		strcat(config_name,OPENSSL_CONF);
-		p=config_name;
-		}
+		p=to_free=make_config_name();
 
 	default_config_file=p;
 
-	config=CONF_load(config,p,&errline);
-	if (config == NULL) ERR_clear_error();
+	config=NCONF_new(NULL);
+	i=NCONF_load(config,p,&errline);
+	if (i == 0)
+		{
+		if (ERR_GET_REASON(ERR_peek_last_error())
+		    == CONF_R_NO_SUCH_FILE)
+			{
+			BIO_printf(bio_err,
+				   "WARNING: can't open config file: %s\n",p);
+			ERR_clear_error();
+			NCONF_free(config);
+			config = NULL;
+			}
+		else
+			{
+			ERR_print_errors(bio_err);
+			NCONF_free(config);
+			exit(1);
+			}
+		}
 
 	prog=prog_init();
 
 	/* first check the program name */
-	program_name(Argv[0],pname,PROG_NAME_SIZE);
+	program_name(Argv[0],pname,sizeof pname);
 
 	f.name=pname;
-	fp=(FUNCTION *)lh_retrieve(prog,(char *)&f);
+	fp=lh_FUNCTION_retrieve(prog,&f);
 	if (fp != NULL)
 		{
 		Argv[0]=pname;
@@ -190,7 +373,7 @@ int main(int Argc, char *Argv[])
 		{
 		ret=0;
 		p=buf;
-		n=1024;
+		n=sizeof buf;
 		i=0;
 		for (;;)
 			{
@@ -200,7 +383,8 @@ int main(int Argc, char *Argv[])
 			else	prompt="OpenSSL> ";
 			fputs(prompt,stdout);
 			fflush(stdout);
-			fgets(p,n,stdin);
+			if (!fgets(p,n,stdin))
+				goto end;
 			if (p[0] == '\0') goto end;
 			i=strlen(p);
 			if (i <= 1) break;
@@ -224,17 +408,17 @@ int main(int Argc, char *Argv[])
 	BIO_printf(bio_err,"bad exit\n");
 	ret=1;
 end:
+	if (to_free)
+		OPENSSL_free(to_free);
 	if (config != NULL)
 		{
-		CONF_free(config);
+		NCONF_free(config);
 		config=NULL;
 		}
-	if (prog != NULL) lh_free(prog);
-	if (arg.data != NULL) Free(arg.data);
-	ERR_remove_state(0);
+	if (prog != NULL) lh_FUNCTION_free(prog);
+	if (arg.data != NULL) OPENSSL_free(arg.data);
 
-	EVP_cleanup();
-	ERR_free_strings();
+	apps_shutdown();
 
 	CRYPTO_mem_leaks(bio_err);
 	if (bio_err != NULL)
@@ -242,14 +426,25 @@ end:
 		BIO_free(bio_err);
 		bio_err=NULL;
 		}
-	EXIT(ret);
+#if defined( OPENSSL_SYS_VMS) && (__INITIAL_POINTER_SIZE == 64)
+	/* Free any duplicate Argv[] storage. */
+	if (free_Argv)
+		{
+		OPENSSL_free(Argv);
+		}
+#endif
+	OPENSSL_EXIT(ret);
 	}
 
 #define LIST_STANDARD_COMMANDS "list-standard-commands"
 #define LIST_MESSAGE_DIGEST_COMMANDS "list-message-digest-commands"
+#define LIST_MESSAGE_DIGEST_ALGORITHMS "list-message-digest-algorithms"
 #define LIST_CIPHER_COMMANDS "list-cipher-commands"
+#define LIST_CIPHER_ALGORITHMS "list-cipher-algorithms"
+#define LIST_PUBLIC_KEY_ALGORITHMS "list-public-key-algorithms"
 
-static int do_cmd(LHASH *prog, int argc, char *argv[])
+
+static int do_cmd(LHASH_OF(FUNCTION) *prog, int argc, char *argv[])
 	{
 	FUNCTION f,*fp;
 	int i,ret=1,tp,nl;
@@ -257,11 +452,44 @@ static int do_cmd(LHASH *prog, int argc, char *argv[])
 	if ((argc <= 0) || (argv[0] == NULL))
 		{ ret=0; goto end; }
 	f.name=argv[0];
-	fp=(FUNCTION *)lh_retrieve(prog,(char *)&f);
+	fp=lh_FUNCTION_retrieve(prog,&f);
+	if (fp == NULL)
+		{
+		if (EVP_get_digestbyname(argv[0]))
+			{
+			f.type = FUNC_TYPE_MD;
+			f.func = dgst_main;
+			fp = &f;
+			}
+		else if (EVP_get_cipherbyname(argv[0]))
+			{
+			f.type = FUNC_TYPE_CIPHER;
+			f.func = enc_main;
+			fp = &f;
+			}
+		}
 	if (fp != NULL)
 		{
 		ret=fp->func(argc,argv);
 		}
+	else if ((strncmp(argv[0],"no-",3)) == 0)
+		{
+		BIO *bio_stdout = BIO_new_fp(stdout,BIO_NOCLOSE);
+#ifdef OPENSSL_SYS_VMS
+		{
+		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+		bio_stdout = BIO_push(tmpbio, bio_stdout);
+		}
+#endif
+		f.name=argv[0]+3;
+		ret = (lh_FUNCTION_retrieve(prog,&f) != NULL);
+		if (!ret)
+			BIO_printf(bio_stdout, "%s\n", argv[0]);
+		else
+			BIO_printf(bio_stdout, "%s\n", argv[0]+3);
+		BIO_free_all(bio_stdout);
+		goto end;
+		}
 	else if ((strcmp(argv[0],"quit") == 0) ||
 		(strcmp(argv[0],"q") == 0) ||
 		(strcmp(argv[0],"exit") == 0) ||
@@ -272,7 +500,10 @@ static int do_cmd(LHASH *prog, int argc, char *argv[])
 		}
 	else if ((strcmp(argv[0],LIST_STANDARD_COMMANDS) == 0) ||
 		(strcmp(argv[0],LIST_MESSAGE_DIGEST_COMMANDS) == 0) ||
-		(strcmp(argv[0],LIST_CIPHER_COMMANDS) == 0))
+		(strcmp(argv[0],LIST_MESSAGE_DIGEST_ALGORITHMS) == 0) ||
+		(strcmp(argv[0],LIST_CIPHER_COMMANDS) == 0) ||
+		(strcmp(argv[0],LIST_CIPHER_ALGORITHMS) == 0) ||
+		(strcmp(argv[0],LIST_PUBLIC_KEY_ALGORITHMS) == 0))
 		{
 		int list_type;
 		BIO *bio_stdout;
@@ -281,14 +512,39 @@ static int do_cmd(LHASH *prog, int argc, char *argv[])
 			list_type = FUNC_TYPE_GENERAL;
 		else if (strcmp(argv[0],LIST_MESSAGE_DIGEST_COMMANDS) == 0)
 			list_type = FUNC_TYPE_MD;
+		else if (strcmp(argv[0],LIST_MESSAGE_DIGEST_ALGORITHMS) == 0)
+			list_type = FUNC_TYPE_MD_ALG;
+		else if (strcmp(argv[0],LIST_PUBLIC_KEY_ALGORITHMS) == 0)
+			list_type = FUNC_TYPE_PKEY;
+		else if (strcmp(argv[0],LIST_CIPHER_ALGORITHMS) == 0)
+			list_type = FUNC_TYPE_CIPHER_ALG;
 		else /* strcmp(argv[0],LIST_CIPHER_COMMANDS) == 0 */
 			list_type = FUNC_TYPE_CIPHER;
 		bio_stdout = BIO_new_fp(stdout,BIO_NOCLOSE);
-		
-		for (fp=functions; fp->name != NULL; fp++)
-			if (fp->type == list_type)
-				BIO_printf(bio_stdout, "%s\n", fp->name);
-		BIO_free(bio_stdout);
+#ifdef OPENSSL_SYS_VMS
+		{
+		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+		bio_stdout = BIO_push(tmpbio, bio_stdout);
+		}
+#endif
+
+		if (!load_config(bio_err, NULL))
+			goto end;
+
+		if (list_type == FUNC_TYPE_PKEY)
+			list_pkey(bio_stdout);	
+		if (list_type == FUNC_TYPE_MD_ALG)
+			list_md(bio_stdout);	
+		if (list_type == FUNC_TYPE_CIPHER_ALG)
+			list_cipher(bio_stdout);	
+		else
+			{
+			for (fp=functions; fp->name != NULL; fp++)
+				if (fp->type == list_type)
+					BIO_printf(bio_stdout, "%s\n",
+								fp->name);
+			}
+		BIO_free_all(bio_stdout);
 		ret=0;
 		goto end;
 		}
@@ -302,7 +558,11 @@ static int do_cmd(LHASH *prog, int argc, char *argv[])
 		for (fp=functions; fp->name != NULL; fp++)
 			{
 			nl=0;
+#ifdef OPENSSL_NO_CAMELLIA
 			if (((i++) % 5) == 0)
+#else
+			if (((i++) % 4) == 0)
+#endif
 				{
 				BIO_printf(bio_err,"\n");
 				nl=1;
@@ -323,7 +583,11 @@ static int do_cmd(LHASH *prog, int argc, char *argv[])
 					BIO_printf(bio_err,"\nCipher commands (see the `enc' command for more details)\n");
 					}
 				}
+#ifdef OPENSSL_NO_CAMELLIA
 			BIO_printf(bio_err,"%-15s",fp->name);
+#else
+			BIO_printf(bio_err,"%-18s",fp->name);
+#endif
 			}
 		BIO_printf(bio_err,"\n\n");
 		ret=0;
@@ -342,32 +606,107 @@ static int SortFnByName(const void *_f1,const void *_f2)
     return strcmp(f1->name,f2->name);
     }
 
-static LHASH *prog_init(void)
+static void list_pkey(BIO *out)
 	{
-	LHASH *ret;
-	FUNCTION *f;
 	int i;
+	for (i = 0; i < EVP_PKEY_asn1_get_count(); i++)
+		{
+		const EVP_PKEY_ASN1_METHOD *ameth;
+		int pkey_id, pkey_base_id, pkey_flags;
+		const char *pinfo, *pem_str;
+		ameth = EVP_PKEY_asn1_get0(i);
+		EVP_PKEY_asn1_get0_info(&pkey_id, &pkey_base_id, &pkey_flags,
+						&pinfo, &pem_str, ameth);
+		if (pkey_flags & ASN1_PKEY_ALIAS)
+			{
+			BIO_printf(out, "Name: %s\n", 
+					OBJ_nid2ln(pkey_id));
+			BIO_printf(out, "\tType: Alias to %s\n",
+					OBJ_nid2ln(pkey_base_id));
+			}
+		else
+			{
+			BIO_printf(out, "Name: %s\n", pinfo);
+			BIO_printf(out, "\tType: %s Algorithm\n", 
+				pkey_flags & ASN1_PKEY_DYNAMIC ?
+					"External" : "Builtin");
+			BIO_printf(out, "\tOID: %s\n", OBJ_nid2ln(pkey_id));
+			if (pem_str == NULL)
+				pem_str = "(none)";
+			BIO_printf(out, "\tPEM string: %s\n", pem_str);
+			}
+					
+		}
+	}
+
+static void list_cipher_fn(const EVP_CIPHER *c,
+			const char *from, const char *to, void *arg)
+	{
+	if (c)
+		BIO_printf(arg, "%s\n", EVP_CIPHER_name(c));
+	else
+		{
+		if (!from)
+			from = "<undefined>";
+		if (!to)
+			to = "<undefined>";
+		BIO_printf(arg, "%s => %s\n", from, to);
+		}
+	}
+
+static void list_cipher(BIO *out)
+	{
+	EVP_CIPHER_do_all_sorted(list_cipher_fn, out);
+	}
+
+static void list_md_fn(const EVP_MD *m,
+			const char *from, const char *to, void *arg)
+	{
+	if (m)
+		BIO_printf(arg, "%s\n", EVP_MD_name(m));
+	else
+		{
+		if (!from)
+			from = "<undefined>";
+		if (!to)
+			to = "<undefined>";
+		BIO_printf(arg, "%s => %s\n", from, to);
+		}
+	}
+
+static void list_md(BIO *out)
+	{
+	EVP_MD_do_all_sorted(list_md_fn, out);
+	}
+
+static int MS_CALLBACK function_cmp(const FUNCTION *a, const FUNCTION *b)
+	{
+	return strncmp(a->name,b->name,8);
+	}
+static IMPLEMENT_LHASH_COMP_FN(function, FUNCTION)
+
+static unsigned long MS_CALLBACK function_hash(const FUNCTION *a)
+	{
+	return lh_strhash(a->name);
+	}	
+static IMPLEMENT_LHASH_HASH_FN(function, FUNCTION)
+
+static LHASH_OF(FUNCTION) *prog_init(void)
+	{
+	LHASH_OF(FUNCTION) *ret;
+	FUNCTION *f;
+	size_t i;
 
 	/* Purely so it looks nice when the user hits ? */
 	for(i=0,f=functions ; f->name != NULL ; ++f,++i)
 	    ;
 	qsort(functions,i,sizeof *functions,SortFnByName);
 
-	if ((ret=lh_new(hash,cmp)) == NULL) return(NULL);
+	if ((ret=lh_FUNCTION_new()) == NULL)
+		return(NULL);
 
 	for (f=functions; f->name != NULL; f++)
-		lh_insert(ret,(char *)f);
+		(void)lh_FUNCTION_insert(ret,f);
 	return(ret);
 	}
 
-static int MS_CALLBACK cmp(FUNCTION *a, FUNCTION *b)
-	{
-	return(strncmp(a->name,b->name,8));
-	}
-
-static unsigned long MS_CALLBACK hash(FUNCTION *a)
-	{
-	return(lh_strhash(a->name));
-	}
-
-#undef SSLEAY