This commit was manufactured by cvs2svn to create tag 'LEVITTE_after_const'.

Constify d2i, s2i, c2i and r2i functions and other associated
functions and macros. This change has associated tags: LEVITTE_before_const and LEVITTE_after_const. Those will be removed when this change has been properly reviewed.
2004-03-15 23:15:27 +00:00 · 2004-03-15 23:15:26 +00:00 · 2004-03-15 23:02:55 +00:00 · 2004-03-15 22:37:08 +00:00 · 2004-03-15 22:33:19 +00:00 · 2004-03-13 23:57:20 +00:00
726 changed files with 31538 additions and 12976 deletions
--- a/618
+++ b/618
@@ -2,7 +2,298 @@
 OpenSSL CHANGES
 _______________

- Changes between 0.9.7 and 0.9.8  [xx XXX 2002]
+ Changes between 0.9.7c and 0.9.8  [xx XXX xxxx]
+
+  *) Constify all or almost all d2i, c2i, s2i and r2i functions, along with
+     associated ASN1, EVP and SSL functions and old ASN1 macros.
+
+  *) BN_zero() only needs to set 'top' and 'neg' to zero for correct results,
+     and this should never fail. So the return value from the use of
+     BN_set_word() (which can fail due to needless expansion) is now deprecated;
+     if OPENSSL_NO_DEPRECATED is defined, BN_zero() is a void macro.
+     [Geoff Thorpe]
+
+  *) BN_CTX_get() should return zero-valued bignums, providing the same
+     initialised value as BN_new().
+     [Geoff Thorpe, suggested by Ulf M<>ller]
+
+  *) Support for inhibitAnyPolicy certificate extension.
+     [Steve Henson]
+
+  *) An audit of the BIGNUM code is underway, for which debugging code is
+     enabled when BN_DEBUG is defined. This makes stricter enforcements on what
+     is considered valid when processing BIGNUMs, and causes execution to
+     assert() when a problem is discovered. If BN_DEBUG_RAND is defined,
+     further steps are taken to deliberately pollute unused data in BIGNUM
+     structures to try and expose faulty code further on. For now, openssl will
+     (in its default mode of operation) continue to tolerate the inconsistent
+     forms that it has tolerated in the past, but authors and packagers should
+     consider trying openssl and their own applications when compiled with
+     these debugging symbols defined. It will help highlight potential bugs in
+     their own code, and will improve the test coverage for OpenSSL itself. At
+     some point, these tighter rules will become openssl's default to improve
+     maintainability, though the assert()s and other overheads will remain only
+     in debugging configurations. See bn.h for more details.
+     [Geoff Thorpe, Nils Larsch, Ulf M<>ller]
+
+  *) BN_CTX_init() has been deprecated, as BN_CTX is an opaque structure
+     that can only be obtained through BN_CTX_new() (which implicitly
+     initialises it). The presence of this function only made it possible
+     to overwrite an existing structure (and cause memory leaks).
+     [Geoff Thorpe]
+
+  *) Because of the callback-based approach for implementing LHASH as a
+     template type, lh_insert() adds opaque objects to hash-tables and
+     lh_doall() or lh_doall_arg() are typically used with a destructor callback
+     to clean up those corresponding objects before destroying the hash table
+     (and losing the object pointers). So some over-zealous constifications in
+     LHASH have been relaxed so that lh_insert() does not take (nor store) the
+     objects as "const" and the lh_doall[_arg] callback wrappers are not
+     prototyped to have "const" restrictions on the object pointers they are
+     given (and so aren't required to cast them away any more).
+     [Geoff Thorpe]
+
+  *) The tmdiff.h API was so ugly and minimal that our own timing utility
+     (speed) prefers to use its own implementation. The two implementations
+     haven't been consolidated as yet (volunteers?) but the tmdiff API has had
+     its object type properly exposed (MS_TM) instead of casting to/from "char
+     *". This may still change yet if someone realises MS_TM and "ms_time_***"
+     aren't necessarily the greatest nomenclatures - but this is what was used
+     internally to the implementation so I've used that for now.
+     [Geoff Thorpe]
+
+  *) Ensure that deprecated functions do not get compiled when
+     OPENSSL_NO_DEPRECATED is defined. Some "openssl" subcommands and a few of
+     the self-tests were still using deprecated key-generation functions so
+     these have been updated also.
+     [Geoff Thorpe]
+
+  *) Reorganise PKCS#7 code to separate the digest location functionality
+     into PKCS7_find_digest(), digest addtion into PKCS7_bio_add_digest().
+     New function PKCS7_set_digest() to set the digest type for PKCS#7
+     digestedData type. Add additional code to correctly generate the
+     digestedData type and add support for this type in PKCS7 initialization
+     functions.
+     [Steve Henson]
+
+  *) New function PKCS7_set0_type_other() this initializes a PKCS7 
+     structure of type "other".
+     [Steve Henson]
+
+  *) Fix prime generation loop in crypto/bn/bn_prime.pl by making
+     sure the loop does correctly stop and breaking ("division by zero")
+     modulus operations are not performed. The (pre-generated) prime
+     table crypto/bn/bn_prime.h was already correct, but it could not be
+     re-generated on some platforms because of the "division by zero"
+     situation in the script.
+     [Ralf S. Engelschall]
+
+  *) Update support for ECC-based TLS ciphersuites according to
+     draft-ietf-tls-ecc-03.txt: the KDF1 key derivation function with
+     SHA-1 now is only used for "small" curves (where the
+     representation of a field element takes up to 24 bytes); for
+     larger curves, the field element resulting from ECDH is directly
+     used as premaster secret.
+     [Douglas Stebila (Sun Microsystems Laboratories)]
+
+  *) Add code for kP+lQ timings to crypto/ec/ectest.c, and add SEC2
+     curve secp160r1 to the tests.
+     [Douglas Stebila (Sun Microsystems Laboratories)]
+
+  *) Add the possibility to load symbols globally with DSO.
+     [G<>tz Babin-Ebell <babin-ebell@trustcenter.de> via Richard Levitte]
+
+  *) Add the functions ERR_set_mark() and ERR_pop_to_mark() for better
+     control of the error stack.
+     [Richard Levitte]
+
+  *) Add support for STORE in ENGINE.
+     [Richard Levitte]
+
+  *) Add the STORE type.  The intention is to provide a common interface
+     to certificate and key stores, be they simple file-based stores, or
+     HSM-type store, or LDAP stores, or...
+     NOTE: The code is currently UNTESTED and isn't really used anywhere.
+     [Richard Levitte]
+
+  *) Add a generic structure called OPENSSL_ITEM.  This can be used to
+     pass a list of arguments to any function as well as provide a way
+     for a function to pass data back to the caller.
+     [Richard Levitte]
+
+  *) Add the functions BUF_strndup() and BUF_memdup().  BUF_strndup()
+     works like BUF_strdup() but can be used to duplicate a portion of
+     a string.  The copy gets NUL-terminated.  BUF_memdup() duplicates
+     a memory area.
+     [Richard Levitte]
+
+  *) Add the function sk_find_ex() which works like sk_find(), but will
+     return an index to an element even if an exact match couldn't be
+     found.  The index is guaranteed to point at the element where the
+     searched-for key would be inserted to preserve sorting order.
+     [Richard Levitte]
+
+  *) Add the function OBJ_bsearch_ex() which works like OBJ_bsearch() but
+     takes an extra flags argument for optional functionality.  Currently,
+     the following flags are defined:
+
+	OBJ_BSEARCH_VALUE_ON_NOMATCH
+	This one gets OBJ_bsearch_ex() to return a pointer to the first
+	element where the comparing function returns a negative or zero
+	number.
+
+	OBJ_BSEARCH_FIRST_VALUE_ON_MATCH
+	This one gets OBJ_bsearch_ex() to return a pointer to the first
+	element where the comparing function returns zero.  This is useful
+	if there are more than one element where the comparing function
+	returns zero.
+     [Richard Levitte]
+
+  *) Make it possible to create self-signed certificates with 'openssl ca'
+     in such a way that the self-signed certificate becomes part of the
+     CA database and uses the same mechanisms for serial number generation
+     as all other certificate signing.  The new flag '-selfsign' enables
+     this functionality.  Adapt CA.sh and CA.pl.in.
+     [Richard Levitte]
+
+  *) Add functionality to check the public key of a certificate request
+     against a given private.  This is useful to check that a certificate
+     request can be signed by that key (self-signing).
+     [Richard Levitte]
+
+  *) Make it possible to have multiple active certificates with the same
+     subject in the CA index file.  This is done only if the keyword
+     'unique_subject' is set to 'no' in the main CA section (default
+     if 'CA_default') of the configuration file.  The value is saved
+     with the database itself in a separate index attribute file,
+     named like the index file with '.attr' appended to the name.
+     [Richard Levitte]
+
+  *) Generate muti valued AVAs using '+' notation in config files for
+     req and dirName.
+     [Steve Henson]
+
+  *) Support for nameConstraints certificate extension.
+     [Steve Henson]
+
+  *) Support for policyConstraints certificate extension.
+     [Steve Henson]
+
+  *) Support for policyMappings certificate extension.
+     [Steve Henson]
+
+  *) Fixed a typo bug that would cause ENGINE_set_default() to set an
+     ENGINE as defaults for all supported algorithms irrespective of
+     the 'flags' parameter. 'flags' is now honoured, so applications
+     should make sure they are passing it correctly.
+     [Geoff Thorpe]
+
+  *) Make sure the default DSA_METHOD implementation only uses its
+     dsa_mod_exp() and/or bn_mod_exp() handlers if they are non-NULL,
+     and change its own handlers to be NULL so as to remove unnecessary
+     indirection. This lets alternative implementations fallback to the
+     default implementation more easily.
+     [Geoff Thorpe]
+
+  *) Support for directoryName in GeneralName related extensions
+     in config files.
+     [Steve Henson]
+
+  *) Make it possible to link applications using Makefile.shared.
+     Make that possible even when linking against static libraries!
+     [Richard Levitte]
+
+  *) Support for single pass processing for S/MIME signing. This now
+     means that S/MIME signing can be done from a pipe, in addition
+     cleartext signing (multipart/signed type) is effectively streaming
+     and the signed data does not need to be all held in memory.
+
+     This is done with a new flag PKCS7_STREAM. When this flag is set
+     PKCS7_sign() only initializes the PKCS7 structure and the actual signing
+     is done after the data is output (and digests calculated) in
+     SMIME_write_PKCS7().
+     [Steve Henson]
+
+  *) Add full support for -rpath/-R, both in shared libraries and
+     applications, at least on the platforms where it's known how
+     to do it.
+     [Richard Levitte]
+
+  *) In crypto/ec/ec_mult.c, implement fast point multiplication with
+     precomputation, based on wNAF splitting: EC_GROUP_precompute_mult()
+     will now compute a table of multiples of the generator that
+     makes subsequent invocations of EC_POINTs_mul() or EC_POINT_mul()
+     faster (notably in the case of a single point multiplication,
+     scalar * generator).
+     [Nils Larsch, Bodo Moeller]
+
+  *) IPv6 support for certificate extensions. The various extensions
+     which use the IP:a.b.c.d can now take IPv6 addresses using the
+     formats of RFC1884 2.2 . IPv6 addresses are now also displayed
+     correctly.
+     [Steve Henson]
+
+  *) Added an ENGINE that implements RSA by performing private key
+     exponentiations with the GMP library. The conversions to and from
+     GMP's mpz_t format aren't optimised nor are any montgomery forms
+     cached, and on x86 it appears OpenSSL's own performance has caught up.
+     However there are likely to be other architectures where GMP could
+     provide a boost. This ENGINE is not built in by default, but it can be
+     specified at Configure time and should be accompanied by the necessary
+     linker additions, eg;
+         ./config -DOPENSSL_USE_GMP -lgmp
+     [Geoff Thorpe]
+
+  *) "openssl engine" will not display ENGINE/DSO load failure errors when
+     testing availability of engines with "-t" - the old behaviour is
+     produced by increasing the feature's verbosity with "-tt".
+     [Geoff Thorpe]
+
+  *) ECDSA routines: under certain error conditions uninitialized BN objects
+     could be freed. Solution: make sure initialization is performed early
+     enough. (Reported and fix supplied by Nils Larsch <nla@trustcenter.de>
+     via PR#459)
+     [Lutz Jaenicke]
+
+  *) Key-generation can now be implemented in RSA_METHOD, DSA_METHOD
+     and DH_METHOD (eg. by ENGINE implementations) to override the normal
+     software implementations. For DSA and DH, parameter generation can
+     also be overriden by providing the appropriate method callbacks.
+     [Geoff Thorpe]
+
+  *) Change the "progress" mechanism used in key-generation and
+     primality testing to functions that take a new BN_GENCB pointer in
+     place of callback/argument pairs. The new API functions have "_ex"
+     postfixes and the older functions are reimplemented as wrappers for
+     the new ones. The OPENSSL_NO_DEPRECATED symbol can be used to hide
+     declarations of the old functions to help (graceful) attempts to
+     migrate to the new functions. Also, the new key-generation API
+     functions operate on a caller-supplied key-structure and return
+     success/failure rather than returning a key or NULL - this is to
+     help make "keygen" another member function of RSA_METHOD etc.
+
+     Example for using the new callback interface:
+
+          int (*my_callback)(int a, int b, BN_GENCB *cb) = ...;
+          void *my_arg = ...;
+          BN_GENCB my_cb;
+
+          BN_GENCB_set(&my_cb, my_callback, my_arg);
+
+          return BN_is_prime_ex(some_bignum, BN_prime_checks, NULL, &cb);
+          /* For the meaning of a, b in calls to my_callback(), see the
+           * documentation of the function that calls the callback.
+           * cb will point to my_cb; my_arg can be retrieved as cb->arg.
+           * my_callback should return 1 if it wants BN_is_prime_ex()
+           * to continue, or 0 to stop.
+           */
+
+     [Geoff Thorpe]
+
+  *) Change the ZLIB compression method to be stateful, and make it
+     available to TLS with the number defined in 
+     draft-ietf-tls-compression-04.txt.
+     [Richard Levitte]

  *) Add the ASN.1 structures and functions for CertificatePair, which
     is defined as follows (according to X.509_4thEditionDraftV6.pdf):
@@ -103,8 +394,6 @@
     [Nils Gura and Douglas Stebila (Sun Microsystems Laboratories)]

  *) Add ECDH in new directory crypto/ecdh/.
-TODO: more general interface (return  x  coordinate, not its hash)
-TODO: bug: pad  x  with leading zeros if necessary
     [Douglas Stebila (Sun Microsystems Laboratories)]

  *) Let BN_rand_range() abort with an error after 100 iterations
@@ -333,7 +622,245 @@ TODO: bug: pad  x  with leading zeros if necessary
         EC_GROUP_get_nid()
     [Nils Larsch <nla@trustcenter.de, Bodo Moeller]
 
- Changes between 0.9.6h and 0.9.7  [XX xxx 2002]
+  *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
+     was actually never needed) and in BN_mul().  The removal in BN_mul()
+     required a small change in bn_mul_part_recursive() and the addition
+     of the functions bn_cmp_part_words(), bn_sub_part_words() and
+     bn_add_part_words(), which do the same thing as bn_cmp_words(),
+     bn_sub_words() and bn_add_words() except they take arrays with
+     differing sizes.
+     [Richard Levitte]
+
+ Changes between 0.9.7c and 0.9.7d  [xx XXX XXXX]
+
+  *) X509 verify fixes. Disable broken certificate workarounds when 
+     X509_V_FLAGS_X509_STRICT is set. Check CRL issuer has cRLSign set if
+     keyUsage extension present. Don't accept CRLs with unhandled critical
+     extensions: since verify currently doesn't process CRL extensions this
+     rejects a CRL with *any* critical extensions. Add new verify error codes
+     for these cases.
+     [Steve Henson]
+
+  *) When creating an OCSP nonce use an OCTET STRING inside the extnValue.
+     A clarification of RFC2560 will require the use of OCTET STRINGs and 
+     some implementations cannot handle the current raw format. Since OpenSSL
+     copies and compares OCSP nonces as opaque blobs without any attempt at
+     parsing them this should not create any compatibility issues.
+     [Steve Henson]
+
+  *) New md flag EVP_MD_CTX_FLAG_REUSE this allows md_data to be reused when
+     calling EVP_MD_CTX_copy_ex() to avoid calling OPENSSL_malloc(). Without
+     this HMAC (and other) operations are several times slower than OpenSSL
+     < 0.9.7.
+     [Steve Henson]
+
+  *) Print out GeneralizedTime and UTCTime in ASN1_STRING_print_ex().
+     [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
+
+  *) Use the correct content when signing type "other".
+     [Steve Henson]
+
+ Changes between 0.9.7b and 0.9.7c  [30 Sep 2003]
+
+  *) Fix various bugs revealed by running the NISCC test suite:
+
+     Stop out of bounds reads in the ASN1 code when presented with
+     invalid tags (CAN-2003-0543 and CAN-2003-0544).
+     
+     Free up ASN1_TYPE correctly if ANY type is invalid (CAN-2003-0545).
+
+     If verify callback ignores invalid public key errors don't try to check
+     certificate signature with the NULL public key.
+
+     [Steve Henson]
+
+  *) New -ignore_err option in ocsp application to stop the server
+     exiting on the first error in a request.
+     [Steve Henson]
+
+  *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
+     if the server requested one: as stated in TLS 1.0 and SSL 3.0
+     specifications.
+     [Steve Henson]
+
+  *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
+     extra data after the compression methods not only for TLS 1.0
+     but also for SSL 3.0 (as required by the specification).
+     [Bodo Moeller; problem pointed out by Matthias Loepfe]
+
+  *) Change X509_certificate_type() to mark the key as exported/exportable
+     when it's 512 *bits* long, not 512 bytes.
+     [Richard Levitte]
+
+  *) Change AES_cbc_encrypt() so it outputs exact multiple of
+     blocks during encryption.
+     [Richard Levitte]
+
+  *) Various fixes to base64 BIO and non blocking I/O. On write 
+     flushes were not handled properly if the BIO retried. On read
+     data was not being buffered properly and had various logic bugs.
+     This also affects blocking I/O when the data being decoded is a
+     certain size.
+     [Steve Henson]
+
+  *) Various S/MIME bugfixes and compatibility changes:
+     output correct application/pkcs7 MIME type if
+     PKCS7_NOOLDMIMETYPE is set. Tolerate some broken signatures.
+     Output CR+LF for EOL if PKCS7_CRLFEOL is set (this makes opening
+     of files as .eml work). Correctly handle very long lines in MIME
+     parser.
+     [Steve Henson]
+
+ Changes between 0.9.7a and 0.9.7b  [10 Apr 2003]
+
+  *) Countermeasure against the Klima-Pokorny-Rosa extension of
+     Bleichbacher's attack on PKCS #1 v1.5 padding: treat
+     a protocol version number mismatch like a decryption error
+     in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
+     [Bodo Moeller]
+
+  *) Turn on RSA blinding by default in the default implementation
+     to avoid a timing attack. Applications that don't want it can call
+     RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
+     They would be ill-advised to do so in most cases.
+     [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
+
+  *) Change RSA blinding code so that it works when the PRNG is not
+     seeded (in this case, the secret RSA exponent is abused as
+     an unpredictable seed -- if it is not unpredictable, there
+     is no point in blinding anyway).  Make RSA blinding thread-safe
+     by remembering the creator's thread ID in rsa->blinding and
+     having all other threads use local one-time blinding factors
+     (this requires more computation than sharing rsa->blinding, but
+     avoids excessive locking; and if an RSA object is not shared
+     between threads, blinding will still be very fast).
+     [Bodo Moeller]
+
+yet to be integrated into this CVS branch:
+- Geoff's ENGINE_set_default() fix
+
+  *) Target "mingw" now allows native Windows code to be generated in
+     the Cygwin environment as well as with the MinGW compiler.
+     [Ulf Moeller] 
+
+ Changes between 0.9.7 and 0.9.7a  [19 Feb 2003]
+
+  *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
+     via timing by performing a MAC computation even if incorrrect
+     block cipher padding has been found.  This is a countermeasure
+     against active attacks where the attacker has to distinguish
+     between bad padding and a MAC verification error. (CAN-2003-0078)
+
+     [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
+     Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
+     Martin Vuagnoux (EPFL, Ilion)]
+
+  *) Make the no-err option work as intended.  The intention with no-err
+     is not to have the whole error stack handling routines removed from
+     libcrypto, it's only intended to remove all the function name and
+     reason texts, thereby removing some of the footprint that may not
+     be interesting if those errors aren't displayed anyway.
+
+     NOTE: it's still possible for any application or module to have it's
+     own set of error texts inserted.  The routines are there, just not
+     used by default when no-err is given.
+     [Richard Levitte]
+
+  *) Add support for FreeBSD on IA64.
+     [dirk.meyer@dinoex.sub.org via Richard Levitte, resolves #454]
+
+  *) Adjust DES_cbc_cksum() so it returns the same value as the MIT
+     Kerberos function mit_des_cbc_cksum().  Before this change,
+     the value returned by DES_cbc_cksum() was like the one from
+     mit_des_cbc_cksum(), except the bytes were swapped.
+     [Kevin Greaney <Kevin.Greaney@hp.com> and Richard Levitte]
+
+  *) Allow an application to disable the automatic SSL chain building.
+     Before this a rather primitive chain build was always performed in
+     ssl3_output_cert_chain(): an application had no way to send the 
+     correct chain if the automatic operation produced an incorrect result.
+
+     Now the chain builder is disabled if either:
+
+     1. Extra certificates are added via SSL_CTX_add_extra_chain_cert().
+
+     2. The mode flag SSL_MODE_NO_AUTO_CHAIN is set.
+
+     The reasoning behind this is that an application would not want the
+     auto chain building to take place if extra chain certificates are
+     present and it might also want a means of sending no additional
+     certificates (for example the chain has two certificates and the
+     root is omitted).
+     [Steve Henson]
+
+  *) Add the possibility to build without the ENGINE framework.
+     [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
+
+  *) Under Win32 gmtime() can return NULL: check return value in
+     OPENSSL_gmtime(). Add error code for case where gmtime() fails.
+     [Steve Henson]
+
+  *) DSA routines: under certain error conditions uninitialized BN objects
+     could be freed. Solution: make sure initialization is performed early
+     enough. (Reported and fix supplied by Ivan D Nestlerode <nestler@MIT.EDU>,
+     Nils Larsch <nla@trustcenter.de> via PR#459)
+     [Lutz Jaenicke]
+
+  *) Another fix for SSLv2 session ID handling: the session ID was incorrectly
+     checked on reconnect on the client side, therefore session resumption
+     could still fail with a "ssl session id is different" error. This
+     behaviour is masked when SSL_OP_ALL is used due to
+     SSL_OP_MICROSOFT_SESS_ID_BUG being set.
+     Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
+     followup to PR #377.
+     [Lutz Jaenicke]
+
+  *) IA-32 assembler support enhancements: unified ELF targets, support
+     for SCO/Caldera platforms, fix for Cygwin shared build.
+     [Andy Polyakov]
+
+  *) Add support for FreeBSD on sparc64.  As a consequence, support for
+     FreeBSD on non-x86 processors is separate from x86 processors on
+     the config script, much like the NetBSD support.
+     [Richard Levitte & Kris Kennaway <kris@obsecurity.org>]
+
+ Changes between 0.9.6h and 0.9.7  [31 Dec 2002]
+
+  [NB: OpenSSL 0.9.6i and later 0.9.6 patch levels were released after
+  OpenSSL 0.9.7.]
+
+  *) Fix session ID handling in SSLv2 client code: the SERVER FINISHED
+     code (06) was taken as the first octet of the session ID and the last
+     octet was ignored consequently. As a result SSLv2 client side session
+     caching could not have worked due to the session ID mismatch between
+     client and server.
+     Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
+     PR #377.
+     [Lutz Jaenicke]
+
+  *) Change the declaration of needed Kerberos libraries to use EX_LIBS
+     instead of the special (and badly supported) LIBKRB5.  LIBKRB5 is
+     removed entirely.
+     [Richard Levitte]
+
+  *) The hw_ncipher.c engine requires dynamic locks.  Unfortunately, it
+     seems that in spite of existing for more than a year, many application
+     author have done nothing to provide the necessary callbacks, which
+     means that this particular engine will not work properly anywhere.
+     This is a very unfortunate situation which forces us, in the name
+     of usability, to give the hw_ncipher.c a static lock, which is part
+     of libcrypto.
+     NOTE: This is for the 0.9.7 series ONLY.  This hack will never
+     appear in 0.9.8 or later.  We EXPECT application authors to have
+     dealt properly with this when 0.9.8 is released (unless we actually
+     make such changes in the libcrypto locking code that changes will
+     have to be made anyway).
+     [Richard Levitte]
+
+  *) In asn1_d2i_read_bio() repeatedly call BIO_read() until all content
+     octets have been read, EOF or an error occurs. Without this change
+     some truncated ASN1 structures will not produce an error.
+     [Steve Henson]

  *) Disable Heimdal support, since it hasn't been fully implemented.
     Still give the possibility to force the use of Heimdal, but with
@@ -475,7 +1002,7 @@ TODO: bug: pad  x  with leading zeros if necessary
 	# is assumed to contain the absolute OpenSSL source directory.
 	mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
 	cd objtree/"`uname -s`-`uname -r`-`uname -m`"
-	(cd $OPENSSL_SOURCE; find . -type f -o -type l) | while read F; do
+	(cd $OPENSSL_SOURCE; find . -type f) | while read F; do
 		mkdir -p `dirname $F`
 		ln -s $OPENSSL_SOURCE/$F $F
 	done
@@ -1975,6 +2502,11 @@ des-cbc           3624.96k     5258.21k     5530.91k     5624.30k     5628.26k
     be reduced modulo  m.
     [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]

+#if 0
+     The following entry accidentily appeared in the CHANGES file
+     distributed with OpenSSL 0.9.7.  The modifications described in
+     it do *not* apply to OpenSSL 0.9.7.
+
  *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
     was actually never needed) and in BN_mul().  The removal in BN_mul()
     required a small change in bn_mul_part_recursive() and the addition
@@ -1983,6 +2515,7 @@ des-cbc           3624.96k     5258.21k     5530.91k     5624.30k     5628.26k
     bn_sub_words() and bn_add_words() except they take arrays with
     differing sizes.
     [Richard Levitte]
+#endif

  *) In 'openssl passwd', verify passwords read from the terminal
     unless the '-salt' option is used (which usually means that
@@ -2114,7 +2647,80 @@ des-cbc           3624.96k     5258.21k     5530.91k     5624.30k     5628.26k
  *) Clean old EAY MD5 hack from e_os.h.
     [Richard Levitte]

- Changes between 0.9.6g and 0.9.6h  [xx XXX xxxx]
+ Changes between 0.9.6j and 0.9.6k  [30 Sep 2003]
+
+  *) Fix various bugs revealed by running the NISCC test suite:
+
+     Stop out of bounds reads in the ASN1 code when presented with
+     invalid tags (CAN-2003-0543 and CAN-2003-0544).
+     
+     If verify callback ignores invalid public key errors don't try to check
+     certificate signature with the NULL public key.
+
+     [Steve Henson]
+
+  *) Fix various bugs revealed by running the NISCC test suite:
+
+     Stop out of bounds reads in the ASN1 code when presented with
+     invalid tags (CAN-2003-0543 and CAN-2003-0544).
+     
+     If verify callback ignores invalid public key errors don't try to check
+     certificate signature with the NULL public key.
+
+     [Steve Henson]
+
+  *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
+     if the server requested one: as stated in TLS 1.0 and SSL 3.0
+     specifications.
+     [Steve Henson]
+
+  *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
+     extra data after the compression methods not only for TLS 1.0
+     but also for SSL 3.0 (as required by the specification).
+     [Bodo Moeller; problem pointed out by Matthias Loepfe]
+
+  *) Change X509_certificate_type() to mark the key as exported/exportable
+     when it's 512 *bits* long, not 512 bytes.
+     [Richard Levitte]
+
+ Changes between 0.9.6i and 0.9.6j  [10 Apr 2003]
+
+  *) Countermeasure against the Klima-Pokorny-Rosa extension of
+     Bleichbacher's attack on PKCS #1 v1.5 padding: treat
+     a protocol version number mismatch like a decryption error
+     in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
+     [Bodo Moeller]
+
+  *) Turn on RSA blinding by default in the default implementation
+     to avoid a timing attack. Applications that don't want it can call
+     RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
+     They would be ill-advised to do so in most cases.
+     [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
+
+  *) Change RSA blinding code so that it works when the PRNG is not
+     seeded (in this case, the secret RSA exponent is abused as
+     an unpredictable seed -- if it is not unpredictable, there
+     is no point in blinding anyway).  Make RSA blinding thread-safe
+     by remembering the creator's thread ID in rsa->blinding and
+     having all other threads use local one-time blinding factors
+     (this requires more computation than sharing rsa->blinding, but
+     avoids excessive locking; and if an RSA object is not shared
+     between threads, blinding will still be very fast).
+     [Bodo Moeller]
+
+ Changes between 0.9.6h and 0.9.6i  [19 Feb 2003]
+
+  *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
+     via timing by performing a MAC computation even if incorrrect
+     block cipher padding has been found.  This is a countermeasure
+     against active attacks where the attacker has to distinguish
+     between bad padding and a MAC verification error. (CAN-2003-0078)
+
+     [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
+     Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
+     Martin Vuagnoux (EPFL, Ilion)]
+
+ Changes between 0.9.6g and 0.9.6h  [5 Dec 2002]

  *) New function OPENSSL_cleanse(), which is used to cleanse a section of
     memory from it's contents.  This is done with a counter that will
--- a/276
+++ b/276
@@ -10,7 +10,7 @@ use strict;

 # see INSTALL for instructions.

-my $usage="Usage: Configure [no-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-Kxxx] [no-hw-xxx|no-hw] [[no-]threads] [[no-]shared] [[no-]zlib|zlib-dynamic] [no-asm] [no-dso] [no-krb5] [386] [--prefix=DIR] [--openssldir=OPENSSLDIR] [--with-xxx[=vvv]] [--test-sanity] os/compiler[:flags]\n";
+my $usage="Usage: Configure [no-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-Kxxx] [no-engine] [no-hw-xxx|no-hw] [[no-]threads] [[no-]shared] [[no-]zlib|zlib-dynamic] [no-asm] [no-dso] [no-krb5] [386] [--prefix=DIR] [--openssldir=OPENSSLDIR] [--with-xxx[=vvv]] [--test-sanity] os/compiler[:flags]\n";

 # Options:
 #
@@ -38,6 +38,7 @@ my $usage="Usage: Configure [no-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-
 # --test-sanity Make a number of sanity checks on the data in this file.
 #               This is a debugging tool for OpenSSL developers.
 #
+# no-engine     do not compile in any engine code.
 # no-hw-xxx     do not compile support for specific crypto hardware.
 #               Generic OpenSSL-style methods relating to this support
 #               are always compiled but return NULL if the hardware
@@ -107,7 +108,6 @@ my $tlib="-lnsl -lsocket";
 my $bits1="THIRTY_TWO_BIT ";
 my $bits2="SIXTY_FOUR_BIT ";

-my $x86_sol_asm="asm/bn86-sol.o asm/co86-sol.o:asm/dx86-sol.o asm/yx86-sol.o:asm/bx86-sol.o:asm/mx86-sol.o:asm/sx86-sol.o:asm/cx86-sol.o:asm/rx86-sol.o:asm/rm86-sol.o:asm/r586-sol.o";
 my $x86_elf_asm="asm/bn86-elf.o asm/co86-elf.o:asm/dx86-elf.o asm/yx86-elf.o:asm/bx86-elf.o:asm/mx86-elf.o:asm/sx86-elf.o:asm/cx86-elf.o:asm/rx86-elf.o:asm/rm86-elf.o:asm/r586-elf.o";
 my $x86_out_asm="asm/bn86-out.o asm/co86-out.o:asm/dx86-out.o asm/yx86-out.o:asm/bx86-out.o:asm/mx86-out.o:asm/sx86-out.o:asm/cx86-out.o:asm/rx86-out.o:asm/rm86-out.o:asm/r586-out.o";
 my $x86_bsdi_asm="asm/bn86bsdi.o asm/co86bsdi.o:asm/dx86bsdi.o asm/yx86bsdi.o:asm/bx86bsdi.o:asm/mx86bsdi.o:asm/sx86bsdi.o:asm/cx86bsdi.o:asm/rx86bsdi.o:asm/rm86bsdi.o:asm/r586bsdi.o";
@@ -142,13 +142,14 @@ my %table=(
 "debug-ben-strict",	"gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DCONST_STRICT -O2 -Wall -Wshadow -Werror -Wpointer-arith -Wcast-qual -Wwrite-strings -pipe::(unknown)::::::",
 "debug-rse","cc:-DTERMIOS -DL_ENDIAN -pipe -O -g -ggdb3 -Wall::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
 "debug-bodo",	"gcc:-DL_ENDIAN -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DBIO_PAIR_DEBUG -DPEDANTIC -g -m486 -pedantic -Wshadow -Wall::-D_REENTRANT:::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
-"debug-ulf",	"gcc:-DL_ENDIAN -DREF_CHECK -DCONF_DEBUG -DBN_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -g -O2 -m486 -Wall -Werror -Wshadow -pipe::-D_REENTRANT:::${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
-"debug-steve",	"gcc:-DL_ENDIAN -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DDEBUG_SAFESTACK -DCRYPTO_MDEBUG_ALL -DPEDANTIC -g -mcpu=i486 -pedantic -Wall -Werror -Wshadow -pipe::-D_REENTRANT::-rdynamic -ldl:${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn",
-"debug-steve-linux-pseudo64",	"gcc:-DL_ENDIAN -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DDEBUG_SAFESTACK -DCRYPTO_MDEBUG_ALL -DOPENSSL_NO_ASM -g -mcpu=i486 -Wall -Werror -Wshadow -pipe::-D_REENTRANT::-rdynamic -ldl:SIXTY_FOUR_BIT::dlfcn",
-"debug-levitte-linux-elf","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wno-long-long -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-levitte-linux-noasm","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DOPENSSL_NO_ASM -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wno-long-long -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-levitte-linux-elf-extreme","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -W -Wundef -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wconversion -Wno-long-long -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-levitte-linux-noasm-extreme","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DOPENSSL_NO_ASM -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -W -Wundef -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wconversion -Wno-long-long -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-ulf", "gcc:-DTERMIOS -DL_ENDIAN -march=i486 -Wall -DBN_DEBUG -DBN_DEBUG_RAND -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DOPENSSL_NO_ASM -g -Wformat -Wshadow -Wmissing-prototypes -Wmissing-declarations:::CYGWIN32::::win32:cygwin-shared:::.dll",
+"debug-steve",	"gcc:-DL_ENDIAN -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DDEBUG_SAFESTACK -DCRYPTO_MDEBUG_ALL -DPEDANTIC -g -mcpu=i486 -pedantic -Wall -Werror -Wshadow -pipe::-D_REENTRANT::-rdynamic -ldl:${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared",
+"debug-steve-linux-pseudo64",	"gcc:-DL_ENDIAN -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DDEBUG_SAFESTACK -DCRYPTO_MDEBUG_ALL -DOPENSSL_NO_ASM -g -mcpu=i486 -Wall -Werror -Wshadow -pipe::-D_REENTRANT::-rdynamic -ldl:SIXTY_FOUR_BIT::dlfcn:linux-shared",
+"debug-levitte-linux-elf","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DBN_DEBUG -DBN_DEBUG_RAND -DCRYPTO_MDEBUG -DENGINE_CONF_DEBUG -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wno-long-long -Wundef -Wconversion -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-levitte-linux-noasm","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DBN_DEBUG -DBN_DEBUG_RAND -DCRYPTO_MDEBUG -DENGINE_CONF_DEBUG -DOPENSSL_NO_ASM -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wno-long-long -Wundef -Wconversion -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-levitte-linux-elf-extreme","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DBN_DEBUG -DBN_DEBUG_RAND -DCRYPTO_MDEBUG -DENGINE_CONF_DEBUG -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -W -Wundef -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wno-long-long -Wundef -Wconversion -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-levitte-linux-noasm-extreme","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DBN_DEBUG -DBN_DEBUG_RAND -DCRYPTO_MDEBUG -DENGINE_CONF_DEBUG -DOPENSSL_NO_ASM -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -W -Wundef -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wno-long-long -Wundef -Wconversion -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-geoff","gcc:-DBN_DEBUG -DBN_DEBUG_RAND -DBN_STRICT -DBN_CTX_DEBUG -DPURIFY -DOPENSSL_NO_DEPRECATED -DOPENSSL_NO_ASM -DOPENSSL_NO_INLINE_ASM -DL_ENDIAN -DTERMIO -DPEDANTIC -g -ggdb3 -Wall -Werror -Wundef -pedantic -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-align -Wsign-compare -Wmissing-prototypes -Wmissing-declarations -Wno-long-long::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "dist",		"cc:-O::(unknown)::::::",

 # Basic configs that should work on any (32 and less bit) box
@@ -161,25 +162,24 @@ my %table=(
 # surrounds it with #APP #NO_APP comment pair which (at least Solaris
 # 7_x86) /usr/ccs/bin/as fails to assemble with "Illegal mnemonic"
 # error message.
-"solaris-x86-gcc","gcc:-O3 -fomit-frame-pointer -m486 -Wall -DL_ENDIAN -DOPENSSL_NO_INLINE_ASM::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_sol_asm}:dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-x86-gcc","gcc:-O3 -fomit-frame-pointer -m486 -Wall -DL_ENDIAN -DOPENSSL_NO_INLINE_ASM::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",

 #### Solaris x86 with Sun C setups
 "solaris-x86-cc","cc:-fast -O -Xa::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",

 #### SPARC Solaris with GNU C setups
-"solaris-sparcv7-gcc","gcc:-O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"solaris-sparcv8-gcc","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv7-gcc","gcc:-O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv8-gcc","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:asm/des_enc-sparc.o fcrypt_b.o::::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # -m32 should be safe to add as long as driver recognizes -mcpu=ultrasparc
-"solaris-sparcv9-gcc","gcc:-m32 -mcpu=ultrasparc -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"solaris64-sparcv9-gcc31","gcc:-mcpu=ultrasparc -m64 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o::::::dlfcn:solaris-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv9-gcc","gcc:-m32 -mcpu=ultrasparc -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:asm/des_enc-sparc.o fcrypt_b.o::asm/md5-sparcv8plus.o::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # gcc pre-2.8 doesn't understand -mcpu=ultrasparc, so fall down to -mv8
 # but keep the assembler modules.
-"solaris-sparcv9-gcc27","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus-gcc27.o:::asm/md5-sparcv8plus-gcc27.o::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"solaris64-sparcv9-gcc","gcc:-m64 -mcpu=ultrasparc -O3 -Wall -DB_ENDIAN::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o::::::dlfcn:solaris-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv9-gcc27","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus-gcc27.o:asm/des_enc-sparc.o fcrypt_b.o::asm/md5-sparcv8plus-gcc27.o::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris64-sparcv9-gcc","gcc:-m64 -mcpu=ultrasparc -O3 -Wall -DB_ENDIAN::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::asm/des_enc-sparc.o fcrypt_b.o::asm/md5-sparcv9.o::::::dlfcn:solaris-shared:-fPIC:-m64 -shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",

 ####
-"debug-solaris-sparcv8-gcc","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -O -g -mv8 -Wall -DB_ENDIAN::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-solaris-sparcv9-gcc","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -O -g -mcpu=ultrasparc -Wall -DB_ENDIAN::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-solaris-sparcv8-gcc","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -O -g -mv8 -Wall -DB_ENDIAN::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-solaris-sparcv9-gcc","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -DPEDANTIC -O -g -mcpu=ultrasparc -pedantic -ansi -Wall -Wshadow -Wno-long-long -D__EXTENSIONS__ -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:asm/des_enc-sparc.o fcrypt_b.o::asm/md5-sparcv8plus.o::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",

 #### SPARC Solaris with Sun C setups
 # DO NOT use /xO[34] on sparc with SC3.0.  It is broken, and will not pass the tests
@@ -188,9 +188,9 @@ my %table=(
 # SC4.2 is ok, better than gcc even on bn as long as you tell it -xarch=v8
 # SC5.0 note: Compiler common patch 107357-01 or later is required!
 "solaris-sparcv7-cc","cc:-xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"solaris-sparcv8-cc","cc:-xarch=v8 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"solaris-sparcv9-cc","cc:-xtarget=ultra -xarch=v8plus -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK_LL DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:solaris-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"solaris64-sparcv9-cc","cc:-xtarget=ultra -xarch=v9 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o::::::dlfcn:solaris-shared:-KPIC:-xarch=v9:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):/usr/ccs/bin/ar rs",
+"solaris-sparcv8-cc","cc:-xarch=v8 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o:asm/des_enc-sparc.o fcrypt_b.o::::::::dlfcn:solaris-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv9-cc","cc:-xtarget=ultra -xarch=v8plus -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK_LL DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:asm/des_enc-sparc.o fcrypt_b.o::asm/md5-sparcv8plus.o::::::dlfcn:solaris-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris64-sparcv9-cc","cc:-xtarget=ultra -xarch=v9 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::asm/des_enc-sparc.o fcrypt_b.o::asm/md5-sparcv9.o::::::dlfcn:solaris-shared:-KPIC:-xarch=v9:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):/usr/ccs/bin/ar rs",
 ####
 "debug-solaris-sparcv8-cc","cc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -xarch=v8 -g -O -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-solaris-sparcv9-cc","cc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -xtarget=ultra -xarch=v8plus -g -O -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK_LL DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:solaris-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
@@ -199,13 +199,12 @@ my %table=(
 "linux-sparcv7","gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT:::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::",
 # Ray Miller <ray.miller@computing-services.oxford.ac.uk> has patiently
 # assisted with debugging of following two configs.
-"linux-sparcv8","gcc:-mv8 -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DBN_DIV2W::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-sparcv8","gcc:-mv8 -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DBN_DIV2W::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:asm/des_enc-sparc.o fcrypt_b.o::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # it's a real mess with -mcpu=ultrasparc option under Linux, but
 # -Wa,-Av8plus should do the trick no matter what.
-"linux-sparcv9","gcc:-mcpu=ultrasparc -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -Wa,-Av8plus -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-# !!!Folowing can't be even tested yet!!!
-#    We have to wait till 64-bit glibc for SPARC is operational!!!
-#"linux64-sparcv9","sparc64-linux-gcc:-m64 -mcpu=v9 -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DBN_DIV2W::-D_REENTRANT:ULTRASPARC::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::::asm/md5-sparcv9.o:",
+"linux-sparcv9","gcc:-mcpu=ultrasparc -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -Wa,-Av8plus -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:asm/des_enc-sparc.o fcrypt_b.o::asm/md5-sparcv8plus.o::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+# GCC 3.1 is a requirement
+"linux64-sparcv9","gcc:-m64 -mcpu=ultrasparc -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT:ULTRASPARC:-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::asm/des_enc-sparc.o fcrypt_b.o::asm/md5-sparcv9.o::::::dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",

 # Sunos configs, assuming sparc for the gcc one.
 ##"sunos-cc", "cc:-O4 -DNOPROTO -DNOCONST::(unknown):SUNOS::DES_UNROLL:::",
@@ -217,13 +216,13 @@ my %table=(
 "irix-cc", "cc:-O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::(unknown):::BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC2 DES_UNROLL BF_PTR::::::::::dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 #### IRIX 6.x configs
 # Only N32 and N64 ABIs are supported. If you need O32 ABI build, invoke
-# './Configure irix-[g]cc' manually.
+# './Configure irix-cc -o32' manually.
 # -mips4 flag is added by ./config when appropriate.
-"irix-mips3-gcc","gcc:-mabi=n32 -mmips-as -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::MD2_CHAR RC4_INDEX RC4_CHAR RC4_CHUNK_LL DES_UNROLL DES_RISC2 DES_PTR BF_PTR SIXTY_FOUR_BIT:${mips3_irix_asm}:dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"irix-mips3-cc", "cc:-n32 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::DES_PTR RC4_CHAR RC4_CHUNK_LL DES_RISC2 DES_UNROLL BF_PTR SIXTY_FOUR_BIT:${mips3_irix_asm}:dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"irix-mips3-gcc","gcc:-mabi=n32 -mmips-as -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::MD2_CHAR RC4_INDEX RC4_CHAR RC4_CHUNK_LL DES_UNROLL DES_RISC2 DES_PTR BF_PTR SIXTY_FOUR_BIT:${mips3_irix_asm}:dlfcn:irix-shared::-mabi=n32:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"irix-mips3-cc", "cc:-n32 -mips3 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::DES_PTR RC4_CHAR RC4_CHUNK_LL DES_RISC2 DES_UNROLL BF_PTR SIXTY_FOUR_BIT:${mips3_irix_asm}:dlfcn:irix-shared::-n32:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # N64 ABI builds.
-"irix64-mips4-gcc","gcc:-mabi=64 -mips4 -mmips-as -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:${mips3_irix_asm}:dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"irix64-mips4-cc", "cc:-64 -mips4 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:${mips3_irix_asm}:dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"irix64-mips4-gcc","gcc:-mabi=64 -mips4 -mmips-as -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:${mips3_irix_asm}:dlfcn:irix-shared::-mabi=64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"irix64-mips4-cc", "cc:-64 -mips4 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:${mips3_irix_asm}:dlfcn:irix-shared::-64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",

 #### Unified HP-UX ANSI C configs.
 # Special notes:
@@ -242,7 +241,7 @@ my %table=(
 #   suitable for execution on the host you're currently compiling at.
 #   If the toolkit is ment to be used on various PA-RISC processors
 #   consider './config +DAportable'.
-# - +DD64 is chosen in favour of +DA2.0W because it's ment to be
+# - +DD64 is chosen in favour of +DA2.0W because it's meant to be
 #   compatible with *future* releases.
 # - If you run ./Configure hpux-parisc-[g]cc manually don't forget to
 #   pass -D_REENTRANT on HP-UX 10 and later.
@@ -253,32 +252,35 @@ my %table=(
 #   crypto/sha/sha_lcl.h.
 #					<appro@fy.chalmers.se>
 #
-#!#"hpux-parisc-cc","cc:-Ae +O3 +ESlit -z -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::::-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl",
 # Since there is mention of this in shlib/hpux10-cc.sh
 "hpux-parisc-cc-o4","cc:-Ae +O4 +ESlit -z -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::::-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "hpux-parisc-gcc","gcc:-O3 -DB_ENDIAN -DBN_DIV2W::::-Wl,+s -ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:-fPIC::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"hpux64-parisc-cc","cc:-Ae +DD64 +O3 +ESlit -z -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dlfcn:hpux64-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux-parisc2-gcc","gcc:-march=2.0 -O3 -DB_ENDIAN::-D_REENTRANT::-Wl,+s -ldld:SIXTY_FOUR_BIT RC4_CHAR RC4_CHUNK DES_PTR DES_UNROLL DES_RISC1:asm/pa-risc2.o:::::::::dl:hpux-shared:-fPIC::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # 64bit PARISC for GCC without optimization, which seems to make problems.
 # Submitted by <ross.alexander@uk.neceur.com>
 "hpux64-parisc-gcc","gcc:-DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dlfcn:hpux64-shared:-fpic::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-
-# IA-64 targets
-# I have no idea if this one actually works, feedback needed. <appro>
-"hpux-ia64-cc","cc:-Ae +DD32 +O3 +ESlit -z -DB_ENDIAN::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/ia64-cpp.o:::::::::dlfcn:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-# Frank Geurts <frank.geurts@nl.abnamro.com> has patiently assisted with
-# with debugging of the following config.
-"hpux64-ia64-cc","cc:-Ae +DD64 +O3 +ESlit -z -DB_ENDIAN::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/ia64-cpp.o:::::::::dlfcn:hpux64-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux64-parisc2-gcc","gcc:-O3 -DB_ENDIAN::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2W.o:::::::::dlfcn:hpux64-shared:-fpic::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",

 # More attempts at unified 10.X and 11.X targets for HP C compiler.
 #
 # Chris Ruemmler <ruemmler@cup.hp.com>
 # Kevin Steves <ks@hp.se>
-"hpux-parisc-cc","cc:+O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"hpux-parisc2-cc","cc:+DA2.0 +DS2.0 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2.o:::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"hpux64-parisc2-cc","cc:+DD64 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2W.o:::::::::dlfcn:hpux64-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux-parisc-cc","cc:+O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux-parisc2-cc","cc:+DA2.0 +DS2.0 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2.o:::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux64-parisc2-cc","cc:+DD64 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2W.o:::::::::dlfcn:hpux64-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # Isn't the line below meaningless? HP-UX cc optimizes for host by default.
 # hpux-parisc1_0-cc with +DAportable flag would make more sense. <appro>
-"hpux-parisc1_1-cc","cc:+DA1.1 +DS1.1 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux-parisc1_1-cc","cc:+DA1.1 +DS1.1 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+
+# HP/UX IA-64 targets
+"hpux-ia64-cc","cc:-Ae +DD32 +O3 +Olit=all -z -DB_ENDIAN::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/ia64-cpp.o:::::::::dlfcn:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+# Frank Geurts <frank.geurts@nl.abnamro.com> has patiently assisted with
+# with debugging of the following config.
+"hpux64-ia64-cc","cc:-Ae +DD64 +O3 +Olit=all -z -DB_ENDIAN::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/ia64-cpp.o:::::::::dlfcn:hpux64-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+# GCC builds [not tested yet]...
+# _ILP32 should have been defined by compiler driver, but it isn't...
+"hpux-ia64-gcc","gcc:-O3 -DB_ENDIAN -D_ILP32::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/ia64.o:::::::::dlfcn:hpux-shared:-fpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux64-ia64-gcc","gcc:-mlp64 -O3 -DB_ENDIAN::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/ia64.o:::::::::dlfcn:hpux-shared:-fpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)", 

 # HPUX 9.X config.
 # Don't use the bundled cc.  It is broken.  Use HP ANSI C if possible, or
@@ -376,6 +378,7 @@ my %table=(

 # The intel boxes :-), It would be worth seeing if bsdi-gcc can use the
 # bn86-elf.o file file since it is hand tweaked assembler.
+"linux-ia32-icc",	"icc:-DL_ENDIAN -DTERMIO -O2::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-elf",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-pentium",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -mcpu=pentium -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-ppro",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -mcpu=pentiumpro -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
@@ -385,17 +388,21 @@ my %table=(
 "debug-linux-elf","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -m486 -Wall::-D_REENTRANT::-lefence -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-linux-elf-noefence","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -m486 -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn",
 "linux-aout",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}",
-"linux-mipsel",   "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::(unknown):::BN_LLONG:::",
-"linux-mips",   "gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::(unknown):::BN_LLONG:::",
+"linux-mipsel",   "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL DES_RISC2::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-mips",   "gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL DES_RISC2::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-ppc",    "gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_RISC1 DES_UNROLL::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-m68k",   "gcc:-DB_ENDIAN -DTERMIO -O2 -fomit-frame-pointer -Wall::-D_REENTRANT:::BN_LLONG::",
 "linux-s390",	"gcc:-DB_ENDIAN -DTERMIO -DNO_ASM -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-s390x",	"gcc:-DB_ENDIAN -DTERMIO -DNO_ASM -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-ia64",   "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK RC4_CHAR:asm/ia64.o:::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-ia64-ecc",   "ecc:-DL_ENDIAN -DTERMIO -O2 -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK RC4_CHAR:asm/ia64.o:::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-x86_64", "gcc:-m64 -DL_ENDIAN -DTERMIO -O3 -Wall -DMD32_REG_T=int::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK RC4_CHAR BF_PTR2 DES_INT DES_UNROLL:asm/x86_64-gcc.o:::::::::dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "NetBSD-sparc",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -mv8 -Wall -DB_ENDIAN::(unknown):::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "NetBSD-m68",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -Wall -DB_ENDIAN::(unknown):::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "NetBSD-x86",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -m486 -Wall::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "FreeBSD-elf",  "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::-pthread -D_REENTRANT -D_THREAD_SAFE -D_THREADSAFE:::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"FreeBSD-sparc64","gcc:-DB_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer::-pthread -D_REENTRANT -D_THREAD_SAFE -D_THREADSAFE:::SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2 BF_PTR::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"FreeBSD-ia64","gcc:-DL_ENDIAN -DTERMIOS -O -fomit-frame-pointer::(unknown):::SIXTY_FOUR_BIT_LONG RC4_CHUNK RC4_CHAR:asm/ia64-cpp.o:::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "FreeBSD",      "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}",
 "bsdi-gcc",     "gcc:-O3 -ffast-math -DL_ENDIAN -DPERL5 -m486::(unknown):::RSA_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_bsdi_asm}",
 "bsdi-elf-gcc",     "gcc:-DPERL5 -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown)::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
@@ -403,7 +410,7 @@ my %table=(
 "nextstep3.3",	"cc:-O3 -Wall:<libc.h>:(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:::",

 # NCR MP-RAS UNIX ver 02.03.01
-"ncr-scde","cc:-O6 -Xa -Hoff=BEHAVED -686 -Hwide -Hiw::(unknown)::-lsocket -lnsl:${x86_gcc_des} ${x86_gcc_opts}:::",
+"ncr-scde","cc:-O6 -Xa -Hoff=BEHAVED -686 -Hwide -Hiw::(unknown)::-lsocket -lnsl -lc89:${x86_gcc_des} ${x86_gcc_opts}:::",

 # QNX 4
 "qnx4",	"cc:-DL_ENDIAN -DTERMIO::(unknown):::${x86_gcc_des} ${x86_gcc_opts}:",
@@ -414,33 +421,36 @@ my %table=(
 # Linux on ARM
 "linux-elf-arm","gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT:::BN_LLONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",

-# UnixWare 2.0x fails destest with -O
+# SCO/Caldera targets.
+#
+# Originally we had like unixware-*, unixware-*-pentium, unixware-*-p6, etc.
+# Now we only have blended unixware-* as it's the only one used by ./config.
+# If you want to optimize for particular microarchitecture, bypass ./config
+# and './Configure unixware-7 -Kpentium_pro' or whatever appropriate.
+# Note that not all targets include assembler support. Mostly because of
+# lack of motivation to support out-of-date platforms with out-of-date
+# compiler drivers and assemblers. Tim Rice <tim@multitalents.net> has
+# patiently assisted to debug most of it.
+#
+# UnixWare 2.0x fails destest with -O.
 "unixware-2.0","cc:-DFILIO_H -DNO_STRINGS_H::-Kthread::-lsocket -lnsl -lresolv -lx:${x86_gcc_des} ${x86_gcc_opts}:::",
-"unixware-2.0-pentium","cc:-DFILIO_H -DNO_STRINGS_H -Kpentium::-Kthread::-lsocket -lnsl -lresolv -lx:MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
-
-# UnixWare 2.1
 "unixware-2.1","cc:-O -DFILIO_H::-Kthread::-lsocket -lnsl -lresolv -lx:${x86_gcc_des} ${x86_gcc_opts}:::",
-"unixware-2.1-pentium","cc:-O -DFILIO_H -Kpentium::-Kthread::-lsocket -lnsl -lresolv -lx:MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
-"unixware-2.1-p6","cc:-O -DFILIO_H -Kp6::-Kthread::-lsocket -lnsl -lresolv -lx:MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
+"unixware-7","cc:-O -DFILIO_H -Kalloca::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}:${x86_elf_asm}:dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"unixware-7-gcc","gcc:-DL_ENDIAN -DFILIO_H -O3 -fomit-frame-pointer -m486 -Wall::-D_REENTRANT::-lsocket -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:gnu-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"OpenUNIX-8","cc:-O -DFILIO_H -Kalloca::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}:${x86_elf_asm}:dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"OpenUNIX-8-gcc","gcc:-O -DFILIO_H -fomit-frame-pointer::-pthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}:${x86_elf_asm}:dlfcn:svr5-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"sco3-gcc",  "gcc:-O3 -fomit-frame-pointer -Dssize_t=int -DNO_SYS_UN_H::(unknown)::-lsocket:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:::", # the SCO assembler doesn't seem to like our assembler files ...
+# SCO 5 - Ben Laurie <ben@algroup.co.uk> says the -O breaks the SCO cc.
+"sco5-cc",  "cc:-belf::(unknown)::-lsocket -lnsl:${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:svr3-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"sco5-gcc",  "gcc:-O3 -fomit-frame-pointer::(unknown)::-lsocket -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:svr3-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",

-# UnixWare 7
-"unixware-7","cc:-O -DFILIO_H -Kalloca::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"unixware-7-pentium","cc:-O -DFILIO_H -Kalloca -Kpentium::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"unixware-7-pentium_pro","cc:-O -DFILIO_H -Kalloca -Kpentium_pro::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"unixware-7-gcc","gcc:-DL_ENDIAN -DFILIO_H -O3 -fomit-frame-pointer -m486 -Wall::-D_REENTRANT::-lsocket -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:gnu-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-
-# OpenUNIX 8
-"OpenUNIX-8","cc:-O -DFILIO_H -Kalloca::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"OpenUNIX-8-gcc","gcc:-O -DFILIO_H -fomit-frame-pointer::-pthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"OpenUNIX-8-pentium","cc:-O -DFILIO_H -Kalloca -Kpentium::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"OpenUNIX-8-pentium_pro","cc:-O -DFILIO_H -Kalloca -Kpentium_pro::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",

 # IBM's AIX.
 "aix-cc",   "cc:-O -DB_ENDIAN -qmaxmem=16384::(unknown):AIX::BN_LLONG RC4_CHAR:::",
 "aix-gcc",  "gcc:-O3 -DB_ENDIAN::(unknown):AIX::BN_LLONG RC4_CHAR:::",
-"aix43-cc",   "cc:-O -DAIX -DB_ENDIAN -qmaxmem=16384::(unknown):::BN_LLONG RC4_CHAR::::::::::dlfcn:",
+"aix43-cc",   "cc:-O -DAIX -DB_ENDIAN -qmaxmem=16384::(unknown):::BN_LLONG RC4_CHAR::::::::::dlfcn:aix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)::",
 "aix43-gcc",  "gcc:-O1 -DAIX -DB_ENDIAN::(unknown):::BN_LLONG RC4_CHAR::::::::::dlfcn:",
-"aix64-cc",   "cc:-O -DAIX -DB_ENDIAN -qmaxmem=16384 -q64::(unknown):::SIXTY_FOUR_BIT_LONG RC4_CHAR::::::::::dlfcn::::::-X 64",
+"aix64-cc",   "cc:-O -DAIX -DB_ENDIAN -qmaxmem=16384 -q64::(unknown):::SIXTY_FOUR_BIT_LONG RC4_CHAR::::::::::dlfcn:aix-shared::-q64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)::-X 64",

 #
 # Cray T90 and similar (SDSC)
@@ -473,15 +483,6 @@ my %table=(
 "dgux-R4-gcc",	"gcc:-O3 -fomit-frame-pointer::(unknown)::-lnsl -lsocket:RC4_INDEX DES_UNROLL:::",
 "dgux-R4-x86-gcc",	"gcc:-O3 -fomit-frame-pointer -DL_ENDIAN::(unknown)::-lnsl -lsocket:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",

-# SCO 3 - Tim Rice <tim@multitalents.net>
-"sco3-gcc",  "gcc:-O3 -fomit-frame-pointer -Dssize_t=int -DNO_SYS_UN_H::(unknown)::-lsocket:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:::", # the SCO assembler doesn't seem to like our assembler files ...
-
-# SCO 5 - Ben Laurie <ben@algroup.co.uk> says the -O breaks the
-# SCO cc.
-"sco5-cc",  "cc:-belf::(unknown)::-lsocket -lresolv -lnsl:${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:svr3-shared:-Kpic", # des options?
-"sco5-cc-pentium",  "cc:-Kpentium::(unknown)::-lsocket:${x86_gcc_des} ${x86_gcc_opts}:::", # des options?
-"sco5-gcc",  "gcc:-O3 -fomit-frame-pointer::(unknown)::-lsocket -lresolv -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:svr3-shared:-fPIC", # the SCO assembler doesn't seem to like our assembler files ...
-
 # Sinix/ReliantUNIX RM400
 # NOTE: The CDS++ Compiler up to V2.0Bsomething has the IRIX_CC_BUG optimizer problem. Better use -g  */
 "ReliantUNIX","cc:-KPIC -g -DTERMIOS -DB_ENDIAN::-Kthread:SNI:-lsocket -lnsl -lc -L/usr/ucblib -lucb:BN_LLONG DES_PTR DES_RISC2 DES_UNROLL BF_PTR::::::::::dlfcn:reliantunix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
@@ -508,13 +509,11 @@ my %table=(
 "VC-MSDOS","cl:::(unknown):MSDOS::BN_LLONG MD2_CHAR DES_UNROLL DES_PTR RC4_INDEX SIXTEEN_BIT:::",

 # Borland C++ 4.5
-"BC-32","bcc32::::WIN32::BN_LLONG DES_PTR RC4_INDEX::::::::::win32",
+"BC-32","bcc32::::WIN32::BN_LLONG DES_PTR RC4_INDEX EXPORT_VAR_AS_FN::::::::::win32",
 "BC-16","bcc:::(unknown):WIN16::BN_LLONG DES_PTR RC4_INDEX SIXTEEN_BIT:::",

-# Mingw32
-# (Note: the real CFLAGS for Windows builds are defined by util/mk1mf.pl
-# and its library files in util/pl/*)
-"Mingw32", "gcc:-DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall:::::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::win32",
+# MinGW
+"mingw", "gcc:-DL_ENDIAN -fomit-frame-pointer -O3 -march=i486 -mno-cygwin -Wall:::MINGW32:-mno-cygwin -lwsock32 -lgdi32:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}:win32::::.dll",

 # UWIN 
 "UWIN", "cc:-DTERMIOS -DL_ENDIAN -O -Wall:::UWIN::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::win32",
@@ -522,12 +521,19 @@ my %table=(
 # Cygwin
 "Cygwin-pre1.3", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown):CYGWIN32::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::win32",
 "Cygwin", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -march=i486 -Wall:::CYGWIN32::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}:win32:cygwin-shared:::.dll",
+"debug-Cygwin", "gcc:-DTERMIOS -DL_ENDIAN -march=i486 -Wall -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DOPENSSL_NO_ASM -g -Wformat -Wshadow -Wmissing-prototypes -Wmissing-declarations -Werror:::CYGWIN32::::win32:cygwin-shared:::.dll",
+
+# NetWare from David Ward (dsward@novell.com) - requires MetroWerks NLM development tools
+# netware-clib => legacy CLib c-runtime support
+"netware-clib", "mwccnlm:::::${x86_gcc_opts}:::",
+# netware-libc => LibC/NKS support
+"netware-libc", "mwccnlm:::::BN_LLONG ${x86_gcc_opts}:::",

 # DJGPP
 "DJGPP", "gcc:-I/dev/env/WATT_ROOT/inc -DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O2 -Wall:::MSDOS:-L/dev/env/WATT_ROOT/lib -lwatt:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::",

 # Ultrix from Bernhard Simon <simon@zid.tuwien.ac.at>
-"ultrix-cc","cc:-std1 -O -Olimit 1000 -DL_ENDIAN::(unknown):::::::",
+"ultrix-cc","cc:-std1 -O -Olimit 2500 -DL_ENDIAN::(unknown):::::::",
 "ultrix-gcc","gcc:-O3 -DL_ENDIAN::(unknown):::::::",
 # K&R C is no longer supported; you need gcc on old Ultrix installations
 ##"ultrix","cc:-O2 -DNOPROTO -DNOCONST -DL_ENDIAN::(unknown):::::::",
@@ -540,8 +546,8 @@ my %table=(
 "OpenBSD-m88k",		"gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):::BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "OpenBSD-mips",		"gcc:-DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer::(unknown):::BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL DES_RISC2::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "OpenBSD-powerpc",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):::BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"OpenBSD-sparc",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):::BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"OpenBSD-sparc64",	"gcc:-DB_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer::(unknown):::SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2 BF_PTR::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"OpenBSD-sparc",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):::BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL::asm/des_enc-sparc.o fcrypt_b.o::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"OpenBSD-sparc64",	"gcc:-DB_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer::(unknown):::SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2 BF_PTR::asm/des_enc-sparc.o fcrypt_b.o::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "OpenBSD-vax",		"gcc:-DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer::(unknown):::BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "OpenBSD-hppa",		"gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):::BN_LLONG RC2_CHAR RC4_INDEX DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",

@@ -566,14 +572,16 @@ my %table=(
 "vxworks-ppc405","ccppc:-g -msoft-float -mlongcall -DCPU=PPC405 -I\$(WIND_BASE)/target/h:::VXWORKS:-r:::::",
 "vxworks-ppc750","ccppc:-ansi -nostdinc -DPPC750 -D_REENTRANT -fvolatile -fno-builtin -fno-for-scope -fsigned-char -Wall -msoft-float -mlongcall -DCPU=PPC604 -I\$(WIND_BASE)/target/h \$(DEBUG_FLAG):::VXWORKS:-r:::::",
 "vxworks-ppc750-debug","ccppc:-ansi -nostdinc -DPPC750 -D_REENTRANT -fvolatile -fno-builtin -fno-for-scope -fsigned-char -Wall -msoft-float -mlongcall -DCPU=PPC604 -I\$(WIND_BASE)/target/h -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -DDEBUG -g:::VXWORKS:-r:::::",
+"vxworks-ppc860","ccppc:-nostdinc -msoft-float -DCPU=PPC860 -DNO_STRINGS_H -I\$(WIND_BASE)/target/h:::VXWORKS:-r:::::",
+"vxworks-mipsle","ccmips:-B\$(WIND_BASE)/host/\$(WIND_HOST_TYPE)/lib/gcc-lib/ -DL_ENDIAN -EL -Wl,-EL -mips2 -mno-branch-likely -G 0 -fno-builtin -msoft-float -DCPU=MIPS32 -DMIPSEL -DNO_STRINGS_H -I\$(WIND_BASE)/target/h:::VXWORKS:-r::::::::::::::::ranlibmips:",

 ##### Compaq Non-Stop Kernel (Tandem)
 "tandem-c89","c89:-Ww -D__TANDEM -D_XOPEN_SOURCE -D_XOPEN_SOURCE_EXTENDED=1 -D_TANDEM_SOURCE -DB_ENDIAN::(unknown):::THIRTY_TWO_BIT:::",

 );

-my @WinTargets=qw(VC-NT VC-CE VC-WIN32 VC-WIN16 VC-W31-16 VC-W31-32 VC-MSDOS
-	BC-32 BC-16 Mingw32 OS2-EMX);
+my @MK1MF_Builds=qw(VC-NT VC-CE VC-WIN32 VC-WIN16 VC-W31-16 VC-W31-32 VC-MSDOS
+	BC-32 BC-16 Mingw32 OS2-EMX netware-clib netware-libc);

 my $idx = 0;
 my $idx_cc = $idx++;
@@ -656,6 +664,7 @@ my $openssl_thread_defines;
 my $openssl_sys_defines="";
 my $openssl_other_defines;
 my $libs;
+my $libkrb5="";
 my $target;
 my $options;
 my $symlink;
@@ -693,19 +702,24 @@ PROCESS_ARGS:
 		elsif (/^no-asm$/)
 		 	{
 			$no_asm=1;
-			$flags .= "-DOPENSSL_NO_ASM ";
+			#$flags .= "-DOPENSSL_NO_ASM ";
 			$openssl_other_defines .= "#define OPENSSL_NO_ASM\n";
 			}
+		elsif (/^no-err$/)
+		 	{
+			$flags .= "-DOPENSSL_NO_ERR ";
+			$openssl_other_defines .= "#define OPENSSL_NO_ERR\n";
+			}
 		elsif (/^no-hw-(.+)$/)
 			{
 			my $hw=$1;
 			$hw =~ tr/[a-z]/[A-Z]/;
-			$flags .= "-DOPENSSL_NO_HW_$hw ";
+			#$flags .= "-DOPENSSL_NO_HW_$hw ";
 			$openssl_other_defines .= "#define OPENSSL_NO_HW_$hw\n";
 			}
 		elsif (/^no-hw$/)
 			{
-			$flags .= "-DOPENSSL_NO_HW ";
+			#$flags .= "-DOPENSSL_NO_HW ";
 			$openssl_other_defines .= "#define OPENSSL_NO_HW\n";
 			}
 		elsif (/^no-dso$/)
@@ -741,22 +755,22 @@ PROCESS_ARGS:
 			my $algo=$1;
 			push @skip,$algo;
 			$algo =~ tr/[a-z]/[A-Z]/;
-			$flags .= "-DOPENSSL_NO_$algo ";
-			$depflags .= "-DOPENSSL_NO_$algo ";
+			#$flags .= "-DOPENSSL_NO_$algo ";
+			#$depflags .= "-DOPENSSL_NO_$algo ";
 			$openssl_algorithm_defines .= "#define OPENSSL_NO_$algo\n";
 			if ($algo eq "RIJNDAEL")
 				{
 				push @skip, "aes";
-				$flags .= "-DOPENSSL_NO_AES ";
-				$depflags .= "-DOPENSSL_NO_AES ";
+				#$flags .= "-DOPENSSL_NO_AES ";
+				#$depflags .= "-DOPENSSL_NO_AES ";
 				$openssl_algorithm_defines .= "#define OPENSSL_NO_AES\n";
 				}
 			if ($algo eq "DES")
 				{
 				push @skip, "mdc2";
 				$options .= " no-mdc2";
-				$flags .= "-DOPENSSL_NO_MDC2 ";
-				$depflags .= "-DOPENSSL_NO_MDC2 ";
+				#$flags .= "-DOPENSSL_NO_MDC2 ";
+				#$depflags .= "-DOPENSSL_NO_MDC2 ";
 				$openssl_algorithm_defines .= "#define OPENSSL_NO_MDC2\n";
 				}
 			if ($algo eq "EC")
@@ -892,24 +906,24 @@ $no_tls1=1 if ($no_dh);
 if ($no_ssl2)
 	{
 	push @skip,"SSL2";
-	$flags .= "-DOPENSSL_NO_SSL2 ";
-	$depflags .= "-DOPENSSL_NO_SSL2 ";
+	#$flags .= "-DOPENSSL_NO_SSL2 ";
+	#$depflags .= "-DOPENSSL_NO_SSL2 ";
 	$openssl_algorithm_defines .= "#define OPENSSL_NO_SSL2\n";
 	}

 if ($no_ssl3)
 	{
 	push @skip,"SSL3";
-	$flags .= "-DOPENSSL_NO_SSL3 ";
-	$depflags .= "-DOPENSSL_NO_SSL3 ";
+	#$flags .= "-DOPENSSL_NO_SSL3 ";
+	#$depflags .= "-DOPENSSL_NO_SSL3 ";
 	$openssl_algorithm_defines .= "#define OPENSSL_NO_SSL3\n";
 	}

 if ($no_tls1)
 	{
 	push @skip,"TLS1";
-	$flags .= "-DOPENSSL_NO_TLS1 ";
-	$depflags .= "-DOPENSSL_NO_TLS1 ";
+	#$flags .= "-DOPENSSL_NO_TLS1 ";
+	#$depflags .= "-DOPENSSL_NO_TLS1 ";
 	$openssl_algorithm_defines .= "#define OPENSSL_NO_TLS1\n";
 	}

@@ -936,7 +950,7 @@ print "Configuring for $target\n";

 &usage if (!defined($table{$target}));

-my $IsWindows=scalar grep /^$target$/,@WinTargets;
+my $IsMK1MF=scalar grep /^$target$/,@MK1MF_Builds;

 $exe_ext=".exe" if ($target eq "Cygwin");
 $exe_ext=".exe" if ($target eq "DJGPP");
@@ -950,7 +964,7 @@ $openssldir=$prefix . "/ssl" if $openssldir eq "";
 $openssldir=$prefix . "/" . $openssldir if $openssldir !~ /(^\/|^[a-zA-Z]:[\\\/])/;


-print "IsWindows=$IsWindows\n";
+print "IsMK1MF=$IsMK1MF\n";

 my @fields = split(/\s*:\s*/,$table{$target} . ":" x 30 , -1);
 my $cc = $fields[$idx_cc];
@@ -977,6 +991,8 @@ my $shared_extension = $fields[$idx_shared_extension];
 my $ranlib = $fields[$idx_ranlib];
 my $arflags = $fields[$idx_arflags];

+my $no_shared_warn=0;
+
 $cflags="$flags$cflags" if ($flags ne "");

 # Kerberos settings.  The flavor must be provided from outside, either through
@@ -985,7 +1001,7 @@ if ($no_krb5
 	|| !defined($withargs{"krb5-flavor"})
 	|| $withargs{"krb5-flavor"} eq "")
 	{
-	$cflags="-DOPENSSL_NO_KRB5 $cflags";
+	#$cflags="-DOPENSSL_NO_KRB5 $cflags";
 	$options.=" no-krb5" unless $no_krb5;
 	$openssl_algorithm_defines .= "#define OPENSSL_NO_KRB5\n";
 	}
@@ -1037,7 +1053,7 @@ else
 			}
 		}
 	$withargs{"krb5-lib"} .= " -lresolv"
-		if ("$lresolv");
+		if ("$lresolv" ne "");
 	$withargs{"krb5-include"} = "-I".$withargs{"krb5-dir"}."/include"
 		if $withargs{"krb5-include"} eq "" &&
 		   $withargs{"krb5-dir"} ne "";
@@ -1096,7 +1112,7 @@ else
 #		}
 	}	

-$lflags="$libs$lflags"if ($libs ne "");
+$lflags="$libs$lflags" if ($libs ne "");

 if ($no_asm)
 	{
@@ -1104,9 +1120,14 @@ if ($no_asm)
 	$sha1_obj=$md5_obj=$rmd160_obj="";
 	}

+if (!$no_shared)
+	{
+	$cast_obj="";	# CAST assembler is not PIC
+	}
+
 if ($threads)
 	{
-	$cflags=$thread_cflags;
+	#$cflags=$thread_cflags;
 	$openssl_thread_defines .= $thread_defines;
 	}

@@ -1119,36 +1140,33 @@ if ($zlib)

 # You will find shlib_mark1 and shlib_mark2 explained in Makefile.org
 my $shared_mark = "";
-if ($shared_target ne "")
+if ($shared_target eq "")
+	{
+	$no_shared_warn = 1 if !$no_shared;
+	$no_shared = 1;
+	}
+if (!$no_shared)
 	{
 	if ($shared_cflag ne "")
 		{
-		$cflags = "$shared_cflag $cflags";
+		$cflags = "$shared_cflag -DOPENSSL_PIC $cflags";
 		}
-	if (!$no_shared)
-		{
-		#$shared_mark = "\$(SHARED_LIBS)";
-		}
-	}
-else
-	{
-	$no_shared = 1;
 	}

 if ($no_shared)
 	{
-	$cflags="-DOPENSSL_NO_DYNAMIC_ENGINE $cflags";
+	#$cflags="-DOPENSSL_NO_DYNAMIC_ENGINE $cflags";
 	$openssl_other_defines.="#define OPENSSL_NO_DYNAMIC_ENGINE\n";
 	}
 else
 	{
-	$cflags="-DOPENSSL_NO_STATIC_ENGINE $cflags";
+	#$cflags="-DOPENSSL_NO_STATIC_ENGINE $cflags";
 	$openssl_other_defines.="#define OPENSSL_NO_STATIC_ENGINE\n";
 	}

 if ($sys_id ne "")
 	{
-	$cflags="-DOPENSSL_SYSNAME_$sys_id $cflags";
+	#$cflags="-DOPENSSL_SYSNAME_$sys_id $cflags";
 	$openssl_sys_defines="#define OPENSSL_SYSNAME_$sys_id\n";
 	}

@@ -1163,6 +1181,8 @@ if ($ranlib eq "")
 #$bn_obj="$bn1";

 $bn_obj = $bn_asm unless $bn_obj ne "";
+# bn86* is the only one implementing bn_*_part_words
+$cflags.=" -DOPENSSL_BN_ASM_PART_WORDS" if ($bn_obj =~ /bn86/);

 $des_obj=$des_enc	unless ($des_obj =~ /\.o$/);
 $bf_obj=$bf_enc		unless ($bf_obj =~ /\.o$/);
@@ -1319,8 +1339,6 @@ print "ARFLAGS       =$arflags\n";
 print "PERL          =$perl\n";
 print "KRB5_INCLUDES =",$withargs{"krb5-include"},"\n"
 	if $withargs{"krb5-include"} ne "";
-print "LIBKRB5       =",$withargs{"krb5-lib"},"\n"
-	if $withargs{"krb5-lib"} ne "";

 my $des_ptr=0;
 my $des_risc1=0;
@@ -1494,7 +1512,7 @@ print "RC2 uses u$type[$rc2_int]\n" if $rc2_int != $def_int;
 print "BF_PTR used\n" if $bf_ptr == 1; 
 print "BF_PTR2 used\n" if $bf_ptr == 2; 

-if($IsWindows) {
+if($IsMK1MF) {
 	open (OUT,">crypto/buildinf.h") || die "Can't open buildinf.h";
 	printf OUT <<EOF;
 #ifndef MK1MF_BUILD
@@ -1536,7 +1554,7 @@ EOF
 }

 # create the ms/version32.rc file if needed
-if ($IsWindows) {
+if ($IsMK1MF) {
 	my ($v1, $v2, $v3, $v4);
 	if ($version_num =~ /(^[0-9a-f]{1})([0-9a-f]{2})([0-9a-f]{2})([0-9a-f]{2})/i) {
 		$v1=hex $1;
@@ -1609,6 +1627,16 @@ applications as the compiler options required on this system are not known.
 See file INSTALL for details if you need multi-threading.
 EOF

+print <<\EOF if ($no_shared_warn);
+
+You gave the option 'shared'.  Normally, that would give you shared libraries.
+Unfortunately, the OpenSSL configuration doesn't include shared library support
+for this platform yet, so it will pretend you gave the option 'no-shared'.  If
+you can inform the developpers (openssl-dev\@openssl.org) how to support shared
+libraries on this platform, they will at least look at it and try their best
+(but please first make sure you have tried with a current version of OpenSSL).
+EOF
+
 exit(0);

 sub usage
--- a/120
+++ b/120
@@ -44,6 +44,8 @@ OpenSSL  -  Frequently Asked Questions
 * What is special about OpenSSL on Redhat?
 * Why does the OpenSSL compilation fail on MacOS X?
 * Why does the OpenSSL test suite fail on MacOS X?
+* Why does the OpenSSL test suite fail in BN_sqr test [on a 64-bit platform]?
+* Why does OpenBSD-i386 build fail on des-586.s with "Unimplemented segment type"?

 [PROG] Questions about programming with OpenSSL

@@ -66,7 +68,7 @@ OpenSSL  -  Frequently Asked Questions
 * Which is the current version of OpenSSL?

 The current version is available from <URL: http://www.openssl.org>.
-OpenSSL 0.9.6g was released on August 9, 2002.
+OpenSSL 0.9.7c was released on September 30, 2003.

 In addition to the current stable release, you can also access daily
 snapshots of the OpenSSL development version at <URL:
@@ -114,11 +116,14 @@ OpenSSL.  Information on the OpenSSL mailing lists is available from

 * Where can I get a compiled version of OpenSSL?

+You can finder pointers to binary distributions in
+http://www.openssl.org/related/binaries.html .
+
 Some applications that use OpenSSL are distributed in binary form.
 When using such an application, you don't need to install OpenSSL
 yourself; the application will include the required parts (e.g. DLLs).

-If you want to install OpenSSL on a Windows system and you don't have
+If you want to build OpenSSL on a Windows system and you don't have
 a C compiler, read the "Mingw32" section of INSTALL.W32 for information
 on how to obtain and install the free GNU C compiler.

@@ -187,18 +192,30 @@ for permission to use their software with OpenSSL.

 Cryptographic software needs a source of unpredictable data to work
 correctly.  Many open source operating systems provide a "randomness
-device" that serves this purpose.  On other systems, applications have
-to call the RAND_add() or RAND_seed() function with appropriate data
-before generating keys or performing public key encryption.
-(These functions initialize the pseudo-random number generator, PRNG.)
+device" (/dev/urandom or /dev/random) that serves this purpose.
+All OpenSSL versions try to use /dev/urandom by default; starting with
+version 0.9.7, OpenSSL also tries /dev/random if /dev/urandom is not
+available.

-Some broken applications do not do this.  As of version 0.9.5, the
-OpenSSL functions that need randomness report an error if the random
-number generator has not been seeded with at least 128 bits of
-randomness.  If this error occurs, please contact the author of the
-application you are using.  It is likely that it never worked
-correctly.  OpenSSL 0.9.5 and later make the error visible by refusing
-to perform potentially insecure encryption.
+On other systems, applications have to call the RAND_add() or
+RAND_seed() function with appropriate data before generating keys or
+performing public key encryption. (These functions initialize the
+pseudo-random number generator, PRNG.)  Some broken applications do
+not do this.  As of version 0.9.5, the OpenSSL functions that need
+randomness report an error if the random number generator has not been
+seeded with at least 128 bits of randomness.  If this error occurs and
+is not discussed in the documentation of the application you are
+using, please contact the author of that application; it is likely
+that it never worked correctly.  OpenSSL 0.9.5 and later make the
+error visible by refusing to perform potentially insecure encryption.
+
+If you are using Solaris 8, you can add /dev/urandom and /dev/random
+devices by installing patch 112438 (Sparc) or 112439 (x86), which are
+available via the Patchfinder at <URL: http://sunsolve.sun.com>
+(Solaris 9 includes these devices by default). For /dev/random support
+for earlier Solaris versions, see Sun's statement at
+<URL: http://sunsolve.sun.com/pub-cgi/retrieve.pl?doc=fsrdb/27606&zone_32=SUNWski>
+(the SUNWski package is available in patch 105710).

 On systems without /dev/urandom and /dev/random, it is a good idea to
 use the Entropy Gathering Demon (EGD); see the RAND_egd() manpage for
@@ -231,18 +248,6 @@ OpenSSL command line tools. Applications using the OpenSSL library
 provide their own configuration options to specify the entropy source,
 please check out the documentation coming the with application.

-For Solaris 2.6, Tim Nibbe <tnibbe@sprint.net> and others have suggested
-installing the SUNski package from Sun patch 105710-01 (Sparc) which
-adds a /dev/random device and make sure it gets used, usually through
-$RANDFILE.  There are probably similar patches for the other Solaris
-versions.  An official statement from Sun with respect to /dev/random
-support can be found at
-  http://sunsolve.sun.com/pub-cgi/retrieve.pl?doc=fsrdb/27606&zone_32=SUNWski
-However, be warned that /dev/random is usually a blocking device, which
-may have some effects on OpenSSL.
-A third party /dev/random solution for Solaris is available at
-  http://www.cosy.sbg.ac.at/~andi/
-

 * Why do I get an "unable to write 'random state'" error message?

@@ -488,10 +493,13 @@ and then redo the compilation.  What you should really do is make sure
 Sometimes, you may get reports from VC++ command line (cl) that it
 can't find standard include files like stdio.h and other weirdnesses.
 One possible cause is that the environment isn't correctly set up.
-To solve that problem, one should run VCVARS32.BAT which is found in
-the 'bin' subdirectory of the VC++ installation directory (somewhere
-under 'Program Files').  This needs to be done prior to running NMAKE,
-and the changes are only valid for the current DOS session.
+To solve that problem for VC++ versions up to 6, one should run
+VCVARS32.BAT which is found in the 'bin' subdirectory of the VC++
+installation directory (somewhere under 'Program Files').  For VC++
+version 7 (and up?), which is also called VS.NET, the file is called
+VSVARS32.BAT instead.
+This needs to be done prior to running NMAKE, and the changes are only
+valid for the current DOS session.


 * What is special about OpenSSL on Redhat?
@@ -552,6 +560,37 @@ libraries you just built.
 Look in the file PROBLEMS for a more detailed explanation and for possible
 solutions.

+* Why does the OpenSSL test suite fail in BN_sqr test [on a 64-bit platform]?
+
+Failure in BN_sqr test is most likely caused by a failure to configure the
+toolkit for current platform or lack of support for the platform in question.
+Run './config -t' and './apps/openssl version -p'. Do these platform
+identifiers match? If they don't, then you most likely failed to run
+./config and you're hereby advised to do so before filing a bug report.
+If ./config itself fails to run, then it's most likely problem with your
+local environment and you should turn to your system administrator (or
+similar). If identifiers match (and/or no alternative identifier is
+suggested by ./config script), then the platform is unsupported. There might
+or might not be a workaround. Most notably on SPARC64 platforms with GNU
+C compiler you should be able to produce a working build by running
+'./config -m32'. I understand that -m32 might not be what you want/need,
+but the build should be operational. For further details turn to
+<openssl-dev@openssl.org>.
+
+* Why does OpenBSD-i386 build fail on des-586.s with "Unimplemented segment type"?
+
+As of 0.9.7 assembler routines were overhauled for position independence
+of the machine code, which is essential for shared library support. For
+some reason OpenBSD is equipped with an out-of-date GNU assembler which
+finds the new code offensive. To work around the problem, configure with
+no-asm (and sacrifice a great deal of performance) or patch your assembler
+according to <URL: http://www.openssl.org/~appro/gas-1.92.3.OpenBSD.patch>.
+For your convenience a pre-compiled replacement binary is provided at
+<URL: http://www.openssl.org/~appro/gas-1.92.3.static.aout.bin>.
+Reportedly elder *BSD a.out platforms also suffer from this problem and
+remedy should be same. Provided binary is statically linked and should be
+working across wider range of *BSD branches, not just OpenBSD.
+
 [PROG] ========================================================================

 * Is OpenSSL thread-safe?
@@ -610,26 +649,26 @@ built OpenSSL with /MD your application must use /MD and cannot use /MDd.
 * How do I read or write a DER encoded buffer using the ASN1 functions?

 You have two options. You can either use a memory BIO in conjunction
-with the i2d_XXX_bio() or d2i_XXX_bio() functions or you can use the
-i2d_XXX(), d2i_XXX() functions directly. Since these are often the
+with the i2d_*_bio() or d2i_*_bio() functions or you can use the
+i2d_*(), d2i_*() functions directly. Since these are often the
 cause of grief here are some code fragments using PKCS7 as an example:

-unsigned char *buf, *p;
-int len;
+ unsigned char *buf, *p;
+ int len;

-len = i2d_PKCS7(p7, NULL);
-buf = OPENSSL_malloc(len); /* or Malloc, error checking omitted */
-p = buf;
-i2d_PKCS7(p7, &p);
+ len = i2d_PKCS7(p7, NULL);
+ buf = OPENSSL_malloc(len); /* or Malloc, error checking omitted */
+ p = buf;
+ i2d_PKCS7(p7, &p);

 At this point buf contains the len bytes of the DER encoding of
 p7.

 The opposite assumes we already have len bytes in buf:

-unsigned char *p;
-p = buf;
-p7 = d2i_PKCS7(NULL, &p, len);
+ unsigned char *p;
+ p = buf;
+ p7 = d2i_PKCS7(NULL, &p, len);

 At this point p7 contains a valid PKCS7 structure of NULL if an error
 occurred. If an error occurred ERR_print_errors(bio) should give more
@@ -696,6 +735,7 @@ The general answer is to check the config.log file generated when running
 the OpenSSH configure script. It should contain the detailed information
 on why the OpenSSL library was not detected or considered incompatible.

+
 * Can I use OpenSSL's SSL library with non-blocking I/O?

 Yes; make sure to read the SSL_get_error(3) manual page!
--- a/36
+++ b/36
@@ -2,8 +2,10 @@
 INSTALLATION ON THE UNIX PLATFORM
 ---------------------------------

- [Installation on DOS (with djgpp), Windows, OpenVMS and MacOS (before MacOS X)
-  is described in INSTALL.DJGPP, INSTALL.W32, INSTALL.VMS and INSTALL.MacOS.
+ [Installation on DOS (with djgpp), Windows, OpenVMS, MacOS (before MacOS X)
+  and NetWare is described in INSTALL.DJGPP, INSTALL.W32, INSTALL.VMS,
+  INSTALL.MacOS and INSTALL.NW.
+  
  This document describes installation on operating systems in the Unix
  family.]

@@ -140,8 +142,8 @@
     standard headers).  If it is a problem with OpenSSL itself, please
     report the problem to <openssl-bugs@openssl.org> (note that your
     message will be recorded in the request tracker publicly readable
-     via http://www.openssl.org/rt2.html and will be forwarded to a public
-     mailing list). Include the output of "make report" in your message.
+     via http://www.openssl.org/support/rt2.html and will be forwarded to a
+     public mailing list). Include the output of "make report" in your message.
     Please check out the request tracker. Maybe the bug was already
     reported or has already been fixed.

@@ -158,11 +160,11 @@
     If a test fails, look at the output.  There may be reasons for
     the failure that isn't a problem in OpenSSL itself (like a missing
     or malfunctioning bc).  If it is a problem with OpenSSL itself,
-     try removing any compiler optimization flags from the CFLAGS line
+     try removing any compiler optimization flags from the CFLAG line
     in Makefile.ssl and run "make clean; make". Please send a bug
     report to <openssl-bugs@openssl.org>, including the output of
     "make report" in order to be added to the request tracker at
-     http://www.openssl.org/rt2.html.
+     http://www.openssl.org/support/rt2.html.

  4. If everything tests ok, install OpenSSL with

@@ -308,3 +310,25 @@
 to install additional support software to obtain random seed.
 Please check out the manual pages for RAND_add(), RAND_bytes(), RAND_egd(),
 and the FAQ for more information.
+
+ Note on support for multiple builds
+ -----------------------------------
+
+ OpenSSL is usually built in it's source tree.  Unfortunately, this doesn't
+ support building for multiple platforms from the same source tree very well.
+ It is however possible to build in a separate tree through the use of lots
+ of symbolic links, which should be prepared like this:
+
+	mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
+	cd objtree/"`uname -s`-`uname -r`-`uname -m`"
+	(cd $OPENSSL_SOURCE; find . -type f) | while read F; do
+		mkdir -p `dirname $F`
+		rm -f $F; ln -s $OPENSSL_SOURCE/$F $F
+		echo $F '->' $OPENSSL_SOURCE/$F
+	done
+	make -f Makefile.org clean
+
+ OPENSSL_SOURCE is an environment variable that contains the absolute (this
+ is important!) path to the OpenSSL source tree.
+
+ Also, operations like 'make update' should still be made in the source tree.
--- a/INSTALL.DJGPP
+++ b/INSTALL.DJGPP
@@ -12,12 +12,14 @@
 latest versions of DJGPP, GCC, BINUTILS, BASH, etc. This package
 requires that PERL and BC also be installed.

- All of these can be obtained from the usual DJGPP mirror sites, such as
- "ftp://ftp.simtel.net/pub/simtelnet/gnu/djgpp". You also need to have
- the WATT-32 networking package installed before you try to compile
- openssl. This can be obtained from "http://www.bgnett.no/~giva/". The
- Makefile assumes that the WATT-32 code is in directory "watt32" under
- /dev/env/DJDIR.
+ All of these can be obtained from the usual DJGPP mirror sites, such
+ as "ftp://ftp.simtel.net/pub/simtelnet/gnu/djgpp". You also need to
+ have the WATT-32 networking package installed before you try to compile
+ openssl. This can be obtained from "http://www.bgnett.no/~giva/".
+ The Makefile assumes that the WATT-32 code is in the directory
+ specified by the environment variable WATT_ROOT. If you have watt-32
+ in directory "watt32" under your main DJGPP directory, specify
+ WATT_ROOT="/dev/env/DJDIR/watt32".

 To compile openssl, start your BASH shell. Then configure for DOS by
 running "./Configure" with appropriate arguments. The basic syntax for
--- a/INSTALL.NW
+++ b/INSTALL.NW
@@ -0,0 +1,437 @@
+
+INSTALLATION ON THE NETWARE PLATFORM
+------------------------------------
+
+Notes about building OpenSSL for NetWare.
+
+
+BUILD PLATFORM:
+---------------
+The build scripts (batch files, perl scripts, etc) have been developed and
+tested on W2K.  The scripts should run fine on other Windows
+platforms (NT, Win9x, WinXP) but they haven't been tested.  They may require 
+some modifications.
+
+
+Supported NetWare Platforms - NetWare 5.x, NetWare 6.x:
+------------------------------------------
+OpenSSL uses the WinSock interfaces introduced in NetWare 5.  Therefore,
+previous versions of NetWare, 4.x and 3.x, are not supported.
+
+On NetWare there are two c-runtime libraries.  There is the legacy CLIB 
+interfaces and the newer LibC interfaces.  Being ANSI-C libraries, the 
+functionality in CLIB and LibC is similar but the LibC interfaces are built 
+using Novell Kernal Services (NKS) which is designed to leverage 
+multi-processor environments.
+
+The NetWare port of OpenSSL can configured to build using CLIB or LibC.  The 
+CLIB build was developed and tested using NetWare 5.0 sp6.0a.  The LibC 
+build was developed and tested using the NetWare 6.0 FCS.  
+
+The necessary LibC functionality ships with NetWare 6.  However, earlier 
+NetWare 5.x versions will require updates in order to run the OpenSSL LibC
+build.
+
+
+REQUIRED TOOLS:
+---------------
+Based upon the configuration and build options used, some or all of the
+following tools may be required:
+
+
+* Perl for Win32 - required (http://www.activestate.com/ActivePerl)
+   Used to run the various perl scripts on the build platform.
+
+
+* Perl 5.8.0 for NetWare v3.20 (or later) - required 
+   (http://developer.novell.com) Used to run the test script on NetWare 
+   after building.
+
+
+* Metrowerks CodeWarrior PDK 2.1 (or later) for NetWare - required:
+   Provides command line tools used for building.
+
+   Tools:
+   mwccnlm.exe  - C/C++ Compiler for NetWare
+   mwldnlm.exe  - Linker for NetWare
+   mwasmnlm.exe - x86 assembler for NetWare (if using assembly option)
+
+
+* Assemblers - optional:
+   If you intend to build using the assembly options you will need an
+   assembler.  Work has been completed to support two assemblers, Metrowerks
+   and NASM.  However, during development, a bug was found in the Metrowerks
+   assembler which generates incorrect code.  Until this problem is fixed,
+   the Metrowerks assembler cannot be used.
+
+   mwasmnlm.exe - Metrowerks x86 assembler - part of CodeWarrior tools.
+         (version 2.2 Built Aug 23, 1999 - not useable due to code
+          generation bug)
+
+   nasmw.exe - Netwide Assembler NASM
+         version 0.98 was used in development and testing
+
+* Make Tool - required:
+   In order to build you will need a make tool.  Two make tools are
+   supported, GNU make (gmake.exe) or Microsoft nmake.exe.
+
+   gmake.exe - GNU make for Windows (version 3.75 used for development)
+         http://www.gnu.org/software/make/make.html
+
+   nmake.exe - Microsoft make (Version 6.00.8168.0 used for development)
+
+
+* Novell Developer Kit (NDK) - required: (http://developer.novell.com)
+
+   CLIB - BUILDS:
+
+      WinSock2 Developer Components for NetWare:
+         For initial development, the October 27, 2000 version was used.
+         However, future versions should also work.
+
+         NOTE:  The WinSock2 components include headers & import files for
+         NetWare, but you will also need the winsock2.h and supporting
+         headers (pshpack4.h, poppack.h, qos.h) delivered in the
+         Microsoft SDK.  Note: The winsock2.h support headers may change
+         with various versions of winsock2.h.  Check the dependencies
+         section on the NDK WinSock2 download page for the latest
+         information on dependencies.
+
+
+      NLM and NetWare libraries for C (including CLIB and XPlat):
+			If you are going to build a CLIB version of OpenSSL, you will
+			need the CLIB headers and imports.  The March, 2001 NDK release or 
+			later is recommended.
+
+         Earlier versions should work but haven't been tested.  In recent
+         versions the import files have been consolidated and function
+         names moved.  This means you may run into link problems
+         (undefined symbols) when using earlier versions.   The functions
+         are available in earlier versions, but you will have to modifiy
+         the make files to include additional import files (see
+         openssl\util\pl\netware.pl).
+
+
+   LIBC - BUILDS:
+   
+      Libraries for C (LibC) - LibC headers and import files
+			If you are going to build a LibC version of OpenSSL, you will
+			need the LibC headers and imports.  The March 14, 2002 NDK release or
+			later is required.  
+         
+         NOTE: The LibC SDK includes the necessary WinSock2 support.  It
+         It is not necessary to download the WinSock2 Developer when building
+         for LibC.
+
+
+BUILDING:
+---------
+Before building, you will need to set a few environment variables.  You can
+set them manually or you can modify the "netware\set_env.bat" file.
+
+The set_env.bat file is a template you can use to set up the path
+and environment variables you will need to build.  Modify the
+various lines to point to YOUR tools and run set_env.bat.
+
+	netware\set_env.bat [target]
+	
+      target        - "netware-clib" - CLib NetWare build
+                    - "netware-libc" - LibC NetWare build
+
+If you don't use set_env.bat, you will need to set up the following
+environment variables:
+
+   path - Set path to point to the tools you will use.
+
+   MWCIncludes - The location of the NDK include files.
+         
+			CLIB ex: set MWCIncludes=c:\ndk\nwsdk\include\nlm
+			LibC ex: set MWCIncludes=c:\ndk\libc\include
+
+   PRELUDE - The absolute path of the prelude object to link with.  For
+			a CLIB build it is recommended you use the "nwpre.obj" file shipped
+			with the Metrowerks PDK for NetWare.  For a LibC build you should 
+			use the "libcpre.o" file delivered with the LibC NDK components.
+         
+			CLIB ex: set PRELUDE=c:\codewar\novell support\metrowerks support\
+                               libraries\runtime\nwpre.obj
+										 
+			LibC ex: set PRELUDE=c:\ndk\libc\imports\libcpre.o
+
+   IMPORTS - The locaton of the NDK import files.
+         
+			CLIB ex: set IMPORTS=c:\ndk\nwsdk\imports
+			LibC ex: set IMPORTS=c:\ndk\libc\imports
+
+
+In order to build, you need to run the Perl scripts to configure the build
+process and generate a make file.  There is a batch file,
+"netware\build.bat", to automate the process.
+
+Build.bat runs the build configuration scripts and generates a make file.
+If an assembly option is specified, it also runs the scripts to generate 
+the assembly code.  Always run build.bat from the "openssl" directory.
+
+   netware\build [target] [debug opts] [assembly opts] [configure opts]
+	
+      target        - "netware-clib" - CLib NetWare build
+                    - "netware-libc" - LibC NetWare build
+ 
+      debug opts    - "debug"  - build debug
+
+      assembly opts - "nw-mwasm" - use Metrowerks assembler
+                      "nw-nasm"  - use NASM assembler
+                      "no-asm"   - don't use assembly
+
+      configure opts- all unrecognized arguments are passed to the
+                       perl configure script
+
+   examples:
+	
+		CLIB build, debug, without assembly:
+			netware\build.bat netware-clib debug no-asm
+		
+		LibC build, non-debug, using NASM assembly:
+			netware\build.bat netware-libc nw-nasm
+		
+Running build.bat generates a make file to be processed by your make 
+tool (gmake or nmake):
+
+   CLIB ex: gmake -f netware\nlm_clib.mak 
+   LibC ex: gmake -f netware\nlm_libc.mak 
+
+
+You can also run the build scripts manually if you do not want to use the
+build.bat file.  Run the following scripts in the "\openssl"
+subdirectory (in the order listed below):
+
+   perl configure no-asm [other config opts] [netware-clib|netware-libc]
+      configures no assembly build for specified netware environment
+		(CLIB or LibC).
+
+   perl util\mkfiles.pl >MINFO
+      generates a listing of source files (used by mk1mf)
+
+   perl util\mk1mf.pl no-asm [other config opts] [netware-clib|netware-libc >netware\nlm.mak
+      generates the makefile for NetWare
+
+   gmake -f netware\nlm.mak
+      build with the make tool (nmake.exe also works)
+
+NOTE:  If you are building using the assembly option, you must also run the
+various Perl scripts to generate the assembly files.  See build.bat
+for an example of running the various assembly scripts.  You must use the
+"no-asm" option to build without assembly.  The configure and mk1mf scripts
+also have various other options.  See the scripts for more information.
+
+
+The output from the build is placed in the following directories:
+
+   CLIB Debug build:
+      out_nw_clib.dbg     - static libs & test nlm(s)
+      tmp_nw_clib.dbg     - temporary build files
+      outinc_nw_clib      - necessary include files
+
+   CLIB Non-debug build:
+      out_nw_clib         - static libs & test nlm(s)
+      tmp_nw_clib         - temporary build files
+      outinc_nw_clib      - necesary include files
+
+   LibC Debug build:
+      out_nw_libc.dbg     - static libs & test nlm(s)
+      tmp_nw_libc.dbg     - temporary build files
+      outinc_nw_libc      - necessary include files
+
+   LibC Non-debug build:
+      out_nw_libc         - static libs & test nlm(s)
+      tmp_nw_libc         - temporary build files
+      outinc_nw_libc      - necesary include files
+
+
+TESTING:
+--------
+The build process creates the OpenSSL static libs ( crypto.lib, ssl.lib,
+rsaglue.lib ) and several test programs.  You should copy the test programs
+to your NetWare server and run the tests.
+
+The batch file "netware\cpy_tests.bat" will copy all the necessary files
+to your server for testing.  In order to run the batch file, you need a
+drive mapped to your target server.  It will create an "OpenSSL" directory
+on the drive and copy the test files to it.  CAUTION: If a directory with the
+name of "OpenSSL" already exists, it will be deleted.
+
+To run cpy_tests.bat:
+
+   netware\cpy_tests [output directory] [NetWare drive]
+
+      output directory - "out_nw_clib.dbg", "out_nw_libc", etc.
+      NetWare drive    - drive letter of mapped drive
+
+      CLIB ex: netware\cpy_tests out_nw_clib m:
+      LibC ex: netware\cpy_tests out_nw_libc m:
+
+
+The Perl script, "do_tests.pl", in the "OpenSSL" directory on the server
+should be used to execute the tests.  Before running the script, make sure
+your SEARCH PATH includes the "OpenSSL" directory.  For example, if you
+copied the files to the "sys:" volume you use the command:
+
+   SEARCH ADD SYS:\OPENSSL
+
+
+To run do_tests.pl type (at the console prompt):
+
+   perl \openssl\do_tests.pl [options]
+
+      options:
+         -p    - pause after executing each test
+
+The do_tests.pl script generates a log file "\openssl\test_out\tests.log"
+which should be reviewed for errors.  Any errors will be denoted by the word
+"ERROR" in the log.
+
+NOTE:  Currently (11/2002), the LibC test nlms report an error while loading
+       when launched from the perl script (do_tests.pl).  The problems are 
+       being addressed by the LibC development team and should be fixed in the
+       next release.  Until the problems are corrected, the LibC test nlms 
+       will have to be executed manually.  
+
+
+DEVELOPING WITH THE OPENSSL SDK:
+--------------------------------
+Now that everything is built and tested, you are ready to use the OpenSSL
+libraries in your development.
+
+There is no real installation procedure, just copy the static libs and
+headers to your build location.  The libs (crypto.lib & ssl.lib) are
+located in the appropriate "out_nw_XXXX" directory 
+(out_nw_clib, out_nw_libc, etc).  
+
+The headers are located in the appropriate "outinc_nw_XXX" directory 
+(outinc_nw_clib, outinc_nw_libc).  
+
+One suggestion is to create the following directory 
+structure for the OpenSSL SDK:
+
+   \openssl
+      |- bin
+      |   |- openssl.nlm
+      |   |- (other tests you want)
+      |
+      |- lib
+      |   | - crypto.lib
+      |   | - ssl.lib
+      |
+      |- include
+      |   | - openssl
+      |   |    | - (all the headers in "outinc_nw\openssl")
+
+
+The program "openssl.nlm" can be very useful.  It has dozens of
+options and you may want to keep it handy for debugging, testing, etc.
+
+When building your apps using OpenSSL, define "NETWARE".  It is needed by
+some of the OpenSSL headers.  One way to do this is with a compile option,
+for example "-DNETWARE".
+
+
+
+NOTES:
+------
+
+Resource leaks in Tests
+------------------------
+Some OpenSSL tests do not clean up resources and NetWare reports
+the resource leaks when the tests unload.  If this really bugs you,
+you can stop the messages by setting the developer option off at the console
+prompt (set developer option = off).  Or better yet, fix the tests to
+clean up the resources!
+
+
+Multi-threaded Development
+---------------------------
+The NetWare version of OpenSSL is thread-safe however, multi-threaded
+applications must provide the necessary locking function callbacks.  This
+is described in doc\threads.doc.  The file "openssl\crypto\threads\mttest.c"
+is a multi-threaded test program and demonstrates the locking functions.
+
+
+What is openssl2.nlm?
+---------------------
+The openssl program has numerous options and can be used for many different
+things.  Many of the options operate in an interactive mode requiring the
+user to enter data.  Because of this, a default screen is created for the
+program.  However, when running the test script it is not desirable to
+have a seperate screen.  Therefore, the build also creates openssl2.nlm.
+Openssl2.nlm is functionally identical but uses the console screen.
+Openssl2 can be used when a non-interactive mode is desired.
+
+NOTE:  There are may other possibilities (command line options, etc)
+which could have been used to address the screen issue.  The openssl2.nlm
+option was chosen because it impacted only the build not the code.
+
+
+Why only static libraries?
+--------------------------
+Globals, globals, and more globals.  The OpenSSL code uses many global
+variables that are allocated and initialized when used for the first time.
+
+On NetWare, most applications (at least historically) run in the kernel.
+When running in the kernel, there is one instance of global variables.
+For regular application type NLM(s) this isn't a problem because they are
+the only ones using the globals.  However, for a library NLM (an NLM which
+exposes functions and has no threads of execution), the globals cause
+problems.  Applications could inadvertently step on each other if they
+change some globals.  Even worse, the first application that triggers a
+global to be allocated and initialized has the allocated memory charged to
+itself.  Now when that application unloads, NetWare will clean up all the
+applicaton's memory.  The global pointer variables inside OpenSSL now
+point to freed memory.  An abend waiting to happen!
+
+To work correctly in the kernel, library NLM(s) that use globals need to
+provide a set of globals (instance data) for each application.  Another
+option is to require the library only be loaded in a protected address
+space along with the application using it.
+
+Modifying the OpenSSL code to provide a set of globals (instance data) for
+each application isn't technically difficult, but due to the large number
+globals it would require substantial code changes and it wasn't done.  Hence,
+the build currently only builds static libraries which are then linked
+into each application.
+
+NOTE:  If you are building a library NLM that uses the OpenSSL static
+libraries, you will still have to deal with the global variable issue.
+This is because when you link in the OpenSSL code you bring in all the
+globals.  One possible solution for the global pointer variables is to
+register memory functions with OpenSSL which allocate memory and charge it
+to your library NLM (see the function CRYPTO_set_mem_functions).  However,
+be aware that now all memory allocated by OpenSSL is charged to your NLM.
+
+
+CodeWarrior Tools and W2K
+---------------------------
+There have been problems reported with the CodeWarrior Linker
+(mwldnlm.exe) in the PDK 2.1 for NetWare when running on Windows 2000.  The
+problems cause the link step to fail.  The only work around is to obtain an
+updated linker from Metrowerks.  It is expected Metrowerks will release
+PDK 3.0 (in beta testing at this time - May, 2001) in the near future which
+will fix these problems.
+
+
+Makefile "vclean"
+------------------
+The generated makefile has a "vclean" target which cleans up the build
+directories.  If you have been building successfully and suddenly
+experience problems, use "vclean" (gmake -f netware\nlm.mak vclean) and retry.
+
+
+"Undefined Symbol" Linker errors
+--------------------------------
+There have been linker errors reported when doing a CLIB build.  The problems
+occur because some versions of the CLIB SDK import files inadvertently 
+left out some symbols.  One symbol in particular is "_lrotl".  The missing
+functions are actually delivered in the binaries, but they were left out of
+the import files.  The issues should be fixed in the September 2001 release 
+of the NDK.  If you experience the problems you can temporarily
+work around it by manually adding the missing symbols to your version of 
+"clib.imp".  
--- a/INSTALL.W32
+++ b/INSTALL.W32
@@ -10,13 +10,20 @@

 You need Perl for Win32.  Unless you will build on Cygwin, you will need
 ActiveState Perl, available from http://www.activestate.com/ActivePerl.
- For Cygwin users, there's more info in the Cygwin section.

 and one of the following C compilers:

  * Visual C++
  * Borland C
-  * GNU C (Mingw32 or Cygwin)
+  * GNU C (Cygwin or MinGW)
+
+ If you are compiling from a tarball or a CVS snapshot then the Win32 files
+ may well be not up to date. This may mean that some "tweaking" is required to
+ get it all to work. See the trouble shooting section later on for if (when?)
+ it goes wrong.
+
+ Visual C++
+ ----------

 If you want to compile in the assembly language routines with Visual C++ then
 you will need an assembler. This is worth doing because it will result in
@@ -26,26 +33,19 @@
  * Microsoft MASM (aka "ml")
  * Free Netwide Assembler NASM.

- MASM was at one point distributed with VC++. It is now distributed with some
- Microsoft DDKs, for example the Windows NT 4.0 DDK and the Windows 98 DDK. If
- you do not have either of these DDKs then you can just download the binaries
- for the Windows 98 DDK and extract and rename the two files XXXXXml.exe and
- XXXXXml.err, to ml.exe and ml.err and install somewhere on your PATH. Both
- DDKs can be downloaded from the Microsoft developers site www.msdn.com.
+ MASM is distributed with most versions of VC++. For the versions where it is
+ not included in VC++, it is also distributed with some Microsoft DDKs, for
+ example the Windows NT 4.0 DDK and the Windows 98 DDK. If you do not have
+ either of these DDKs then you can just download the binaries for the Windows
+ 98 DDK and extract and rename the two files XXXXXml.exe and XXXXXml.err, to
+ ml.exe and ml.err and install somewhere on your PATH. Both DDKs can be
+ downloaded from the Microsoft developers site www.msdn.com.

 NASM is freely available. Version 0.98 was used during testing: other versions
 may also work. It is available from many places, see for example:
 http://www.kernel.org/pub/software/devel/nasm/binaries/win32/
 The NASM binary nasmw.exe needs to be installed anywhere on your PATH.

- If you are compiling from a tarball or a CVS snapshot then the Win32 files
- may well be not up to date. This may mean that some "tweaking" is required to
- get it all to work. See the trouble shooting section later on for if (when?)
- it goes wrong.
-
- Visual C++
- ----------
-
 Firstly you should run Configure:

 > perl Configure VC-WIN32
@@ -119,18 +119,72 @@
 * Run make:
   > make -f bcb.mak

- GNU C (Mingw32)
- ---------------
+ GNU C (Cygwin)
+ --------------

- To build OpenSSL, you need the Mingw32 package and GNU make.
+ Cygwin provides a bash shell and GNU tools environment running
+ on NT 4.0, Windows 9x, Windows ME, Windows 2000, and Windows XP.
+ Consequently, a make of OpenSSL with Cygwin is closer to a GNU
+ bash environment such as Linux than to other the other Win32
+ makes.
+
+ Cygwin implements a Posix/Unix runtime system (cygwin1.dll).
+ It is also possible to create Win32 binaries that only use the
+ Microsoft C runtime system (msvcrt.dll or crtdll.dll) using
+ MinGW. MinGW can be used in the Cygwin development environment
+ or in a standalone setup as described in the following section.
+
+ To build OpenSSL using Cygwin:
+
+ * Install Cygwin (see http://cygwin.com/)
+
+ * Install Perl and ensure it is in the path. Both Cygwin perl
+   (5.6.1-2 or newer) and ActivePerl work.
+
+ * Run the Cygwin bash shell
+
+ * $ tar zxvf openssl-x.x.x.tar.gz
+   $ cd openssl-x.x.x
+
+   To build the Cygwin version of OpenSSL:
+
+   $ ./config
+   [...]
+   $ make
+   [...]
+   $ make test
+   $ make install
+
+   This will create a default install in /usr/local/ssl.
+
+   To build the MinGW version (native Windows) in Cygwin:
+
+   $ ./Configure mingw
+   [...]
+   $ make
+   [...]
+   $ make test
+   $ make install
+
+ Cygwin Notes:
+
+ "make test" and normal file operations may fail in directories
+ mounted as text (i.e. mount -t c:\somewhere /home) due to Cygwin
+ stripping of carriage returns. To avoid this ensure that a binary
+ mount is used, e.g. mount -b c:\somewhere /home.
+
+ "bc" is not provided in older Cygwin distribution.  This causes a
+ non-fatal error in "make test" but is otherwise harmless.  If
+ desired and needed, GNU bc can be built with Cygwin without change.
+
+ GNU C (MinGW)
+ -------------

 * Compiler installation:

-   Mingw32 is available from <ftp://ftp.xraylith.wisc.edu/pub/khan/
-   gnu-win32/mingw32/gcc-2.95.2/gcc-2.95.2-msvcrt.exe>. Extract it
-   to a directory such as C:\gcc-2.95.2 and add c:\gcc-2.95.2\bin to
-   the PATH environment variable in "System Properties"; or edit and
-   run C:\gcc-2.95.2\mingw32.bat to set the PATH.
+   MinGW is available from http://www.mingw.org. Run the installer and
+   set the MinGW bin directory to the PATH in "System Properties" or
+   autoexec.bat.

 * Compile OpenSSL:

@@ -152,49 +206,6 @@
   > cd out
   > ..\ms\test

- GNU C (Cygwin)
- --------------
-
- Cygwin provides a bash shell and GNU tools environment running
- on NT 4.0, Windows 9x, Windows ME, Windows 2000, and Windows XP.
- Consequently, a make of OpenSSL with Cygwin is closer to a GNU
- bash environment such as Linux than to other W32 makes which are
- based on a single makefile approach. Cygwin implements Posix/Unix
- calls through cygwin1.dll, and is contrasted to Mingw32 which links
- dynamically to msvcrt.dll or crtdll.dll.
-
- To build OpenSSL using Cygwin:
-
- * Install Cygwin (see http://cygwin.com/)
-
- * Install Perl and ensure it is in the path (recent Cygwin perl 
-   (version 5.6.1-2 of the latter has been reported to work) or
-   ActivePerl)
-
- * Run the Cygwin bash shell
-
- * $ tar zxvf openssl-x.x.x.tar.gz
-   $ cd openssl-x.x.x
-   $ ./config
-   [...]
-   $ make
-   [...]
-   $ make test
-   $ make install
-
- This will create a default install in /usr/local/ssl.
-
- Cygwin Notes:
-
- "make test" and normal file operations may fail in directories
- mounted as text (i.e. mount -t c:\somewhere /home) due to Cygwin
- stripping of carriage returns. To avoid this ensure that a binary
- mount is used, e.g. mount -b c:\somewhere /home.
-
- "bc" is not provided in older Cygwin distribution.  This causes a
- non-fatal error in "make test" but is otherwise harmless.  If
- desired and needed, GNU bc can be built with Cygwin without change.
-

 Installation
 ------------
@@ -214,7 +225,7 @@
 	$ md c:\openssl\lib
 	$ md c:\openssl\include
 	$ md c:\openssl\include\openssl
-	$ copy /b inc32\*               c:\openssl\include\openssl
+	$ copy /b inc32\openssl\*       c:\openssl\include\openssl
 	$ copy /b out32dll\ssleay32.lib c:\openssl\lib
 	$ copy /b out32dll\libeay32.lib c:\openssl\lib
 	$ copy /b out32dll\ssleay32.dll c:\openssl\bin
--- a/INSTALL.WCE
+++ b/INSTALL.WCE
@@ -11,6 +11,9 @@
 You also need Perl for Win32.  You will need ActiveState Perl, available
 from http://www.activestate.com/ActivePerl.

+ Windows CE support in OpenSSL relies on wcecompat.  All Windows CE specific
+ issues should be directed to www.essemer.com.au.
+
 The C Runtime Library implementation for Windows CE that is included with
 Microsoft eMbedded Visual C++ 3.0 is incomplete and in some places
 incorrect.  wcecompat plugs the holes and tries to bring the Windows CE
--- a/2
+++ b/2
@@ -12,7 +12,7 @@
  ---------------

 /* ====================================================================
- * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2003 The OpenSSL Project.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
--- a/Makefile.org
+++ b/Makefile.org
@@ -15,6 +15,11 @@ OPTIONS=
 CONFIGURE_ARGS=
 SHLIB_TARGET=

+# HERE indicates where this Makefile lives.  This can be used to indicate
+# where sub-Makefiles are expected to be.  Currently has very limited usage,
+# and should probably not be bothered with at all.
+HERE=.
+
 # INSTALL_PREFIX is for package builders so that they can configure
 # for, say, /usr/ and yet have everything installed to /tmp/somedir/usr/.
 # Normally it is left empty.
@@ -67,6 +72,14 @@ TAR= tar
 TARFLAGS= --no-recursion
 MAKEDEPPROG=makedepend

+# We let the C compiler driver to take care of .s files. This is done in
+# order to be excused from maintaining a separate set of architecture
+# dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC
+# gcc, then the driver will automatically translate it to -xarch=v8plus
+# and pass it down to assembler.
+AS=$(CC) -c
+ASFLAG=$(CFLAG)
+
 # Set BN_ASM to bn_asm.o if you want to use the C version
 BN_ASM= bn_asm.o
 #BN_ASM= bn_asm.o
@@ -161,11 +174,13 @@ SHLIBDIRS= crypto ssl

 # dirs in crypto to build
 SDIRS=  \
+	objects \
 	md2 md4 md5 sha mdc2 hmac ripemd \
 	des rc2 rc4 rc5 idea bf cast \
 	bn ec rsa dsa ecdsa dh ecdh dso engine aes \
-	buffer bio stack lhash rand err objects \
-	evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5
+	buffer bio stack lhash rand err \
+	evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5 \
+	store

 # tests to perform.  "alltests" is a special word indicating that all tests
 # should be performed.
@@ -178,6 +193,7 @@ MAKE=     $(NEWMAKE) -f Makefile.ssl
 MANDIR=$(OPENSSLDIR)/man
 MAN1=1
 MAN3=3
+MANSUFFIX=
 SHELL=/bin/sh

 TOP=    .
@@ -204,7 +220,7 @@ all: Makefile.ssl build_all openssl.pc
 BUILD_CMD=if echo " $(DIRS) " | grep " $$i " >/dev/null 2>/dev/null; then \
 	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making all in $$i..." && \
-		$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' all ) || exit 1; \
+		$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' AS='${AS}' ASFLAG='${ASFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' all ) || exit 1; \
 	else \
 		$(MAKE) $$i; \
 	fi; fi
@@ -242,7 +258,7 @@ libssl$(SHLIB_EXT): libcrypto$(SHLIB_EXT) libssl.a
 	fi

 clean-shared:
-	@for i in $(SHLIBDIRS); do \
+	@set -e; for i in $(SHLIBDIRS); do \
 		if [ -n "$(SHARED_LIBS_LINK_EXTS)" ]; then \
 			tmp="$(SHARED_LIBS_LINK_EXTS)"; \
 			for j in $${tmp:-x}; do \
@@ -256,8 +272,8 @@ clean-shared:
 	done

 link-shared:
-	@ for i in ${SHLIBDIRS}; do \
-		$(NEWMAKE) -f Makefile.shared \
+	@ set -e; for i in ${SHLIBDIRS}; do \
+		$(NEWMAKE) -f $(HERE)/Makefile.shared \
 			LIBNAME=$$i LIBVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			LIBCOMPATVERSIONS=";${SHLIB_VERSION_HISTORY}" \
 			symlink.$(SHLIB_TARGET); \
@@ -267,18 +283,22 @@ link-shared:
 build-shared: do_$(SHLIB_TARGET) link-shared

 do_$(SHLIB_TARGET):
-	@ libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+	@ set -e; libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+			libs="$(LIBKRB5) $$libs"; \
+		fi; \
 		$(NEWMAKE) -f Makefile.shared \
 			CC="$(CC)" LDFLAGS="$(LDFLAGS)" \
 			SHARED_LDFLAGS="$(SHARED_LDFLAGS)" \
 			LIBNAME=$$i LIBVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			LIBCOMPATVERSIONS=";${SHLIB_VERSION_HISTORY}" \
 			LIBDEPS="$$libs $(EX_LIBS)" \
+			LIBRPATH="$(INSTALLTOP)/lib" \
 			link_a.$(SHLIB_TARGET); \
-		libs="$$libs -l$$i"; \
+		libs="-l$$i $$libs"; \
 	done

-openssl.pc:
+openssl.pc: Makefile.ssl
 	@ ( echo 'prefix=$(INSTALLTOP)'; \
 	    echo 'exec_prefix=$${prefix}'; \
 	    echo 'libdir=$${exec_prefix}/lib'; \
@@ -289,7 +309,7 @@ openssl.pc:
 	    echo 'Version: '$(VERSION); \
 	    echo 'Requires: '; \
 	    echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
-	    echo 'Cflags: -I$${includedir}' ) > openssl.pc
+	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > openssl.pc

 Makefile.ssl: Makefile.org
 	@echo "Makefile.ssl is older than Makefile.org."
@@ -297,11 +317,11 @@ Makefile.ssl: Makefile.org
 	@false

 libclean:
-	rm -f *.so *.so.* engines/*.so *.a */lib */*/lib
+	rm -f *.map *.so *.so.* engines/*.so *.a */lib */*/lib

-clean:
-	rm -f shlib/*.o *.o core a.out fluff *.map rehash.time testlog make.log cctest cctest.c
-	@for i in $(DIRS) ;\
+clean:	libclean
+	rm -f shlib/*.o *.o core a.out fluff rehash.time testlog make.log cctest cctest.c
+	@set -e; for i in $(DIRS) ;\
 	do \
 	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making clean in $$i..." && \
@@ -310,9 +330,9 @@ clean:
 	fi; \
 	done;
 	rm -f openssl.pc
-	rm -f *.a *.o speed.* *.map *.so .pure core
+	rm -f speed.* .pure
 	rm -f $(TARFILE)
-	@for i in $(ONEDIRS) ;\
+	@set -e; for i in $(ONEDIRS) ;\
 	do \
 	rm -fr $$i/*; \
 	done
@@ -323,7 +343,7 @@ makefile.one: files

 files:
 	$(PERL) $(TOP)/util/files.pl Makefile.ssl > $(TOP)/MINFO
-	@for i in $(DIRS) ;\
+	@set -e; for i in $(DIRS) ;\
 	do \
 	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making 'files' in $$i..." && \
@@ -335,7 +355,7 @@ links:
 	@$(TOP)/util/point.sh Makefile.ssl Makefile
 	@$(PERL) $(TOP)/util/mkdir-p.pl include/openssl
 	@$(PERL) $(TOP)/util/mklink.pl include/openssl $(EXHEADER)
-	@for i in $(DIRS); do \
+	@set -e; for i in $(DIRS); do \
 	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making links in $$i..." && \
 		$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PERL='${PERL}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' links ) || exit 1; \
@@ -348,7 +368,7 @@ gentests:

 dclean:
 	rm -f *.bak
-	@for i in $(DIRS) ;\
+	@set -e; for i in $(DIRS) ;\
 	do \
 	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making dclean in $$i..." && \
@@ -360,8 +380,11 @@ rehash: rehash.time
 rehash.time: certs
 	@(OPENSSL="`pwd`/apps/openssl"; OPENSSL_DEBUG_MEMORY=on; \
 		export OPENSSL OPENSSL_DEBUG_MEMORY; \
-		LD_LIBRARY_PATH="`pwd`"; DYLD_LIBRARY_PATH="`pwd`"; SHLIB_PATH="`pwd`"; LIBPATH="`pwd`"; \
-		if [ "$(PLATFORM)" != "Cygwin" ]; then PATH="`pwd`:$$PATH"; fi; \
+		LD_LIBRARY_PATH="`pwd`:$$LD_LIBRARY_PATH"; \
+		DYLD_LIBRARY_PATH="`pwd`:$$DYLD_LIBRARY_PATH"; \
+		SHLIB_PATH="`pwd`:$$SHLIB_PATH"; \
+		LIBPATH="`pwd`:$$LIBPATH"; \
+		if [ "$(PLATFORM)" = "Cygwin" ]; then PATH="`pwd`:$$PATH"; fi; \
 		export LD_LIBRARY_PATH DYLD_LIBRARY_PATH SHLIB_PATH LIBPATH PATH; \
 		$(PERL) tools/c_rehash certs)
 	touch rehash.time
@@ -371,8 +394,11 @@ test:   tests
 tests: rehash
 	@(cd test && echo "testing..." && \
 	$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' TESTS='${TESTS}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on tests );
-	@LD_LIBRARY_PATH="`pwd`"; DYLD_LIBRARY_PATH="`pwd`"; SHLIB_PATH="`pwd`"; LIBPATH="`pwd`"; \
-		if [ "$(PLATFORM)" != "Cygwin" ]; then PATH="`pwd`:$$PATH"; fi; \
+	@LD_LIBRARY_PATH="`pwd`:$$LD_LIBRARY_PATH"; \
+	DYLD_LIBRARY_PATH="`pwd`:$$DYLD_LIBRARY_PATH"; \
+	SHLIB_PATH="`pwd`:$$SHLIB_PATH"; \
+	LIBPATH="`pwd`:$$LIBPATH"; \
+	if [ "$(PLATFORM)" = "Cygwin" ]; then PATH="`pwd`:$$PATH"; fi; \
 	export LD_LIBRARY_PATH DYLD_LIBRARY_PATH SHLIB_PATH LIBPATH PATH; \
 	apps/openssl version -a

@@ -380,7 +406,7 @@ report:
 	@$(PERL) util/selftest.pl

 depend:
-	@for i in $(DIRS) ;\
+	@set -e; for i in $(DIRS) ;\
 	do \
 	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making dependencies $$i..." && \
@@ -389,7 +415,7 @@ depend:
 	done;

 lint:
-	@for i in $(DIRS) ;\
+	@set -e; for i in $(DIRS) ;\
 	do \
 	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making lint $$i..." && \
@@ -398,7 +424,7 @@ lint:
 	done;

 tags:
-	@for i in $(DIRS) ;\
+	@set -e; for i in $(DIRS) ;\
 	do \
 	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making tags $$i..." && \
@@ -468,36 +494,36 @@ dist_pem_h:
 install: all install_docs
 	@$(PERL) $(TOP)/util/mkdir-p.pl $(INSTALL_PREFIX)$(INSTALLTOP)/bin \
 		$(INSTALL_PREFIX)$(INSTALLTOP)/lib \
-		$(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkginfo \
+		$(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig \
 		$(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl \
-		$(INSTALL_PREFIX)$(OPENSSLDIR)/engines \
+		$(INSTALL_PREFIX)$(INSTALLTOP)/engines \
 		$(INSTALL_PREFIX)$(OPENSSLDIR)/misc \
 		$(INSTALL_PREFIX)$(OPENSSLDIR)/certs \
 		$(INSTALL_PREFIX)$(OPENSSLDIR)/private \
 		$(INSTALL_PREFIX)$(OPENSSLDIR)/lib
-	@for i in $(EXHEADER) ;\
+	@set -e; for i in $(EXHEADER) ;\
 	do \
 	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
 	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
 	done;
-	@for i in $(DIRS) ;\
+	@set -e; for i in $(DIRS) ;\
 	do \
 	if [ -d "$$i" ]; then \
 		(cd $$i; echo "installing $$i..."; \
 		$(MAKE) CC='${CC}' CFLAG='${CFLAG}' INSTALL_PREFIX='${INSTALL_PREFIX}' INSTALLTOP='${INSTALLTOP}' OPENSSLDIR='${OPENSSLDIR}' EX_LIBS='${EX_LIBS}' SDIRS='${SDIRS}' RANLIB='${RANLIB}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' install ); \
 	fi; \
 	done
-	@for i in $(LIBS) ;\
+	@set -e; for i in $(LIBS) ;\
 	do \
 		if [ -f "$$i" ]; then \
 		(       echo installing $$i; \
 			cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
 			$(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
 			chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-			mv $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i ); \
+			mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i ); \
 		fi; \
 	done;
-	@if [ -n "$(SHARED_LIBS)" ]; then \
+	@set -e; if [ -n "$(SHARED_LIBS)" ]; then \
 		tmp="$(SHARED_LIBS)"; \
 		for i in $${tmp:-x}; \
 		do \
@@ -506,23 +532,30 @@ install: all install_docs
 				if [ "$(PLATFORM)" != "Cygwin" ]; then \
 					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
 					chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-					mv $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
+					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
 				else \
 					c=`echo $$i | sed 's/^lib/cyg/'`; \
 					cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
 					chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
-					mv $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
+					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
 					cp $$i.a $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new; \
 					chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new; \
-					mv $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a; \
+					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a; \
 				fi ); \
 			fi; \
 		done; \
 		(	here="`pwd`"; \
 			cd $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \
-			$(NEWMAKE) -f $$here/Makefile link-shared ); \
+			$(NEWMAKE) -f $$here/Makefile HERE="$$here" link-shared ); \
+		if [ "$(INSTALLTOP)" != "/usr" ]; then \
+			echo 'OpenSSL shared libraries have been installed in:'; \
+			echo '  $(INSTALLTOP)'; \
+			echo ''; \
+			sed -e '1,/^$$/d' doc/openssl-shared.txt; \
+		fi; \
 	fi
-	cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkginfo
+	cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig
+	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig/openssl.pc

 install_docs:
 	@$(PERL) $(TOP)/util/mkdir-p.pl \
@@ -531,25 +564,44 @@ install_docs:
 		$(INSTALL_PREFIX)$(MANDIR)/man5 \
 		$(INSTALL_PREFIX)$(MANDIR)/man7
 	@pod2man="`cd util; ./pod2mantest $(PERL)`"; \
-	for i in doc/apps/*.pod; do \
+	here="`pwd`"; \
+	filecase=; \
+	if [ "$(PLATFORM)" = "DJGPP" -o "$(PLATFORM)" = "Cygwin" ]; then \
+		filecase=-i; \
+	fi; \
+	set -e; for i in doc/apps/*.pod; do \
 		fn=`basename $$i .pod`; \
 		if [ "$$fn" = "config" ]; then sec=5; else sec=1; fi; \
-		echo "installing man$$sec/`basename $$i .pod`.$$sec"; \
+		echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
 		(cd `$(PERL) util/dirname.pl $$i`; \
 		sh -c "$$pod2man \
 			--section=$$sec --center=OpenSSL \
 			--release=$(VERSION) `basename $$i`") \
-			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/`basename $$i .pod`.$$sec; \
+			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
+		$(PERL) util/extract-names.pl < $$i | \
+			grep -v $$filecase "^$$fn\$$" | \
+			grep -v "[	]" | \
+			(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
+			 while read n; do \
+				$$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
+			 done); \
 	done; \
-	for i in doc/crypto/*.pod doc/ssl/*.pod; do \
+	set -e; for i in doc/crypto/*.pod doc/ssl/*.pod; do \
 		fn=`basename $$i .pod`; \
 		if [ "$$fn" = "des_modes" ]; then sec=7; else sec=3; fi; \
-		echo "installing man$$sec/`basename $$i .pod`.$$sec"; \
+		echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
 		(cd `$(PERL) util/dirname.pl $$i`; \
 		sh -c "$$pod2man \
 			--section=$$sec --center=OpenSSL \
 			--release=$(VERSION) `basename $$i`") \
-			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/`basename $$i .pod`.$$sec; \
+			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
+		$(PERL) util/extract-names.pl < $$i | \
+			grep -v $$filecase "^$$fn\$$" | \
+			grep -v "[	]" | \
+			(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
+			 while read n; do \
+				$$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
+			 done); \
 	done

 # DO NOT DELETE THIS LINE -- make depend depends on it.
--- a/Makefile.shared
+++ b/Makefile.shared
@@ -7,19 +7,32 @@

 # CC contains the current compiler.  This one MUST be defined
 CC=cc
-# LDFLAGS contains flags to be used when the temporary object file is
-# created.  SHARED_LDFLAGS contains flags to be used when the shared
-# library is created.
+# LDFLAGS contains flags to be used when temporary object files (when building
+# shared libraries) are created, or when an application is linked.
+# SHARED_LDFLAGS contains flags to be used when the shared library is created.
 LDFLAGS=
 SHARED_LDFLAGS=

-# LIBNAME contains just the name of thhe library, without prefix ("lib"
+# LIBNAME contains just the name of the library, without prefix ("lib"
 # on Unix, "cyg" for certain forms under Cygwin...) or suffix (.a, .so,
-# .dll, ...).  This one MUST have a value when using this makefile.
+# .dll, ...).  This one MUST have a value when using this makefile to
+# build shared libraries.
 # For example, to build libfoo.so, you need to do the following:
 #LIBNAME=foo
 LIBNAME=

+# APPNAME contains just the name of the application, without suffix (""
+# on Unix, ".exe" on Windows, ...).  This one MUST have a value when using
+# this makefile to build applications.
+# For example, to build foo, you need to do the following:
+#APPNAME=foo
+APPNAME=
+
+# OBJECTS contains all the object files to link together into the application.
+# This must contain at least one object file.
+#OBJECTS=foo.o
+OBJECTS=
+
 # LIBEXTRAS contains extra modules to link together with the library.
 # For example, if a second library, say libbar.a needs to be linked into
 # libfoo.so, you need to do the following:
@@ -64,7 +77,7 @@ CALC_VERSIONS=	\
 	if [ -n "$(LIBVERSION)$(LIBCOMPATVERSIONS)" ]; then \
 		prev=""; \
 		for v in `echo "$(LIBVERSION) $(LIBCOMPATVERSIONS)" | cut -d';' -f1`; do \
-			SHLIB_SOVER_NODOT=$$v \
+			SHLIB_SOVER_NODOT=$$v; \
 			SHLIB_SOVER=.$$v; \
 			if [ -n "$$prev" ]; then \
 				SHLIB_COMPAT="$$SHLIB_COMPAT .$$prev"; \
@@ -73,9 +86,19 @@ CALC_VERSIONS=	\
 		done; \
 	fi

+LINK_APP=	\
+  ( $(DEBUG);   \
+    LIBPATH=`for x in $$LIBDEPS; do if echo $$x | grep '^ *-L' > /dev/null 2>&1; then echo $$x | sed -e 's/^ *-L//'; fi; done | uniq`; \
+    LIBPATH=`echo $$LIBPATH | sed -e 's/ /:/g'`; \
+    LD_LIBRARY_PATH=$$LIBPATH:$$LD_LIBRARY_PATH \
+    $$LDCMD $(LDFLAGS) $$LDFLAGS -o $$APPNAME $(OBJECTS) $$LIBDEPS )
+
 LINK_SO=	\
  ( $(DEBUG);   \
    nm -Pg $$SHOBJECTS | grep ' [BDT] ' | cut -f1 -d' ' > lib$(LIBNAME).exp; \
+    LIBPATH=`for x in $$LIBDEPS; do if echo $$x | grep '^ *-L' > /dev/null 2>&1; then echo $$x | sed -e 's/^ *-L//'; fi; done | uniq`; \
+    LIBPATH=`echo $$LIBPATH | sed -e 's/ /:/g'`; \
+    LD_LIBRARY_PATH=$$LIBPATH:$$LD_LIBRARY_PATH \
    $$SHAREDCMD $(SHARED_LDFLAGS) $$SHAREDFLAGS -o $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX \
 	$$ALLSYMSFLAGS $$SHOBJECTS $$NOALLSYMSFLAGS $$LIBDEPS ) && \
  $(SYMLINK_SO); ( $(DEBUG); rm -f lib$(LIBNAME).exp )
@@ -98,326 +121,467 @@ SYMLINK_SO=	\
 LINK_SO_A=	SHOBJECTS="lib$(LIBNAME).a $(LIBEXTRAS)"; $(LINK_SO)
 LINK_SO_O=	SHOBJECTS="$(LIBEXTRAS)"; $(LINK_SO)
 LINK_SO_A_VIA_O=	\
-  SHOBJECTS=lib$(LIBNAME).o ALL=$$ALLSYMSFLAGS ALLSYMSFLAGS= NOALLSYMSFLAGS=; \
+  SHOBJECTS=lib$(LIBNAME).o; \
+  ALL=$$ALLSYMSFLAGS; ALLSYMSFLAGS=; NOALLSYMSFLAGS=; \
  ( $(DEBUG); \
    ld $(LDFLAGS) -r -o lib$(LIBNAME).o $$ALL lib$(LIBNAME).a $(LIBEXTRAS) ); \
  $(LINK_SO) && rm -f $(LIBNAME).o
 LINK_SO_A_UNPACKED=	\
  UNPACKDIR=link_tmp.$$$$; rm -rf $$UNPACKDIR; mkdir $$UNPACKDIR; \
-  (cd $$UNPACKDIR; ar x ../lib$(LIBNAME).a) && cp $(LIBEXTRAS) $$UNPACKDIR && \
+  (cd $$UNPACKDIR; ar x ../lib$(LIBNAME).a) && \
+  ([ -z "$(LIBEXTRAS)" ] || cp $(LIBEXTRAS) $$UNPACKDIR) && \
  SHOBJECTS=$$UNPACKDIR/*.o; \
  $(LINK_SO) && rm -rf $$UNPACKDIR

-DETECT_GNU_LD=${CC} -v 2>&1 | grep '^gcc' >/dev/null 2>&1 && \
-	my_ld=`${CC} -print-prog-name=ld 2>&1` && \
-	[ -n "$$my_ld" ] && \
-	$$my_ld -v 2>&1 | grep 'GNU ld' >/dev/null 2>&1
-DO_GNU=$(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).so \
-	SHLIB_SUFFIX= \
-	LIBDEPS="$(LIBDEPS) -lc" \
-	ALLSYMSFLAGS='-Wl,--whole-archive' \
-	NOALLSYMSFLAGS='-Wl,--no-whole-archive' \
-	SHAREDFLAGS="-shared -Wl,-Bsymbolic -Wl,-soname=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX" \
+DETECT_GNU_LD=(${CC} -Wl,-V /dev/null 2>&1 | grep '^GNU ld' )>/dev/null
+
+DO_GNU_SO=$(CALC_VERSIONS); \
+	SHLIB=lib$(LIBNAME).so; \
+	SHLIB_SUFFIX=; \
+	LIBDEPS="$(LIBDEPS) -lc"; \
+	ALLSYMSFLAGS='-Wl,--whole-archive'; \
+	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
+	SHAREDFLAGS="-shared -Wl,-Bsymbolic -Wl,-soname=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX -Wl,-rpath,$(LIBRPATH)"; \
 	SHAREDCMD='$(CC)'
+DO_GNU_APP=LDCMD=$(CC);\
+	LDFLAGS="-Wl,-rpath,$(LIBRPATH)"; \
+	LIBDEPS="$(LIBDEPS) -lc"; \
+	APPNAME=$(APPNAME)
+
+#This is rather special.  It's a special target with which one can link
+#applications without bothering with any features that have anything to
+#do with shared libraries, for example when linking against static
+#libraries.  It's mostly here to avoid a lot of conditionals everywhere
+#else...
+link_app.:
+	LDCMD=$(CC); \
+	LDFLAGS=""; \
+	LIBDEPS="$(LIBDEPS)"; \
+	APPNAME="$(APPNAME)"; \
+	$(LINK_APP)

 link_o.gnu:
-	@ $(DO_GNU); $(LINK_SO_O)
+	@ $(DO_GNU_SO); $(LINK_SO_O)
 link_a.gnu:
-	@ $(DO_GNU); $(LINK_SO_A)
+	@ $(DO_GNU_SO); $(LINK_SO_A)
+link_app.gnu:
+	@ $(DO_GNU_APP); $(LINK_APP)

 # For Darwin AKA Mac OS/X (dyld)
 link_o.darwin:
 	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME) \
-	SHLIB_SUFFIX=.dylib \
-	LIBDEPS="$(LIBDEPS) -lc" \
-	ALLSYMSFLAGS='-all_load' \
-	NOALLSYMSFLAGS='' \
-	SHAREDFLAGS="-dynamiclib" \
+	SHLIB=lib$(LIBNAME); \
+	SHLIB_SUFFIX=.dylib; \
+	LIBDEPS="$(LIBDEPS) -lc"; \
+	ALLSYMSFLAGS='-all_load'; \
+	NOALLSYMSFLAGS=''; \
+	SHAREDFLAGS="-dynamiclib"; \
 	SHAREDCMD='$(CC)'; \
 	if [ -n "$(LIBVERSION)" ]; then \
-		SHAREDFLAGS="$SHAREDFLAGS -current_version $(LIBVERSION)"; \
+		SHAREDFLAGS="$$SHAREDFLAGS -current_version $(LIBVERSION)"; \
 	fi; \
 	if [ -n "$$SHLIB_SOVER_NODOT" ]; then \
-		SHAREDFLAGS="$SHAREDFLAGS -compatibility_version $$SHLIB_SOVER_NODOT"; \
+		SHAREDFLAGS="$$SHAREDFLAGS -compatibility_version $$SHLIB_SOVER_NODOT"; \
 	fi; \
 	$(LINK_SO_O)
 link_a.darwin:
 	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME) \
-	SHLIB_SUFFIX=.dylib \
-	LIBDEPS="$(LIBDEPS) -lc" \
-	ALLSYMSFLAGS='-all_load' \
-	NOALLSYMSFLAGS='' \
-	SHAREDFLAGS="-dynamiclib" \
+	SHLIB=lib$(LIBNAME); \
+	SHLIB_SUFFIX=.dylib; \
+	LIBDEPS="$(LIBDEPS) -lc"; \
+	ALLSYMSFLAGS='-all_load'; \
+	NOALLSYMSFLAGS=''; \
+	SHAREDFLAGS="-dynamiclib"; \
 	SHAREDCMD='$(CC)'; \
 	if [ -n "$(LIBVERSION)" ]; then \
-		SHAREDFLAGS="$SHAREDFLAGS -current_version $(LIBVERSION)"; \
+		SHAREDFLAGS="$$SHAREDFLAGS -current_version $(LIBVERSION)"; \
 	fi; \
 	if [ -n "$$SHLIB_SOVER_NODOT" ]; then \
-		SHAREDFLAGS="$SHAREDFLAGS -compatibility_version $$SHLIB_SOVER_NODOT"; \
+		SHAREDFLAGS="$$SHAREDFLAGS -compatibility_version $$SHLIB_SOVER_NODOT"; \
 	fi; \
 	$(LINK_SO_A)
+link_app.darwin:
+	LDCMD=$(CC);\
+	LDFLAGS=""; \
+	LIBDEPS="$(LIBDEPS) -lc"; \
+	APPNAME="$(APPNAME)"; \
+	$(LINK_APP)

 link_o.cygwin:
 	@ $(CALC_VERSIONS); \
 	INHIBIT_SYMLINKS=yes; \
-	SHLIB=cyg$(LIBNAME) \
-	SHLIB_SUFFIX=.dll \
-	LIBDEPS="$(LIBDEPS) -lc" \
-	SHLIB_SOVER=-$(LIBVERSION) \
-	ALLSYMSFLAGS='-Wl,--whole-archive' \
-	NOALLSYMSFLAGS='-Wl,--no-whole-archive' \
-	SHAREDFLAGS="-shared -Wl,-Bsymbolic -Wl,--out-implib,lib$(LIBNAME).dll.a" \
+	SHLIB=cyg$(LIBNAME); \
+	SHLIB_SUFFIX=.dll; \
+	LIBDEPS="$(LIBDEPS) -lc"; \
+	SHLIB_SOVER=-$(LIBVERSION); \
+	ALLSYMSFLAGS='-Wl,--whole-archive'; \
+	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
+	SHAREDFLAGS="-shared -Wl,-Bsymbolic -Wl,--out-implib,lib$(LIBNAME).dll.a"; \
 	SHAREDCMD='${CC}'; \
 	$(LINK_SO_O)
 link_a.cygwin:
 	@ $(CALC_VERSIONS); \
 	INHIBIT_SYMLINKS=yes; \
-	SHLIB=cyg$(LIBNAME) \
-	SHLIB_SUFFIX=.dll \
-	LIBDEPS="$(LIBDEPS) -lc" \
-	SHLIB_SOVER= \
-	ALLSYMSFLAGS='-Wl,--whole-archive' \
-	NOALLSYMSFLAGS='-Wl,--no-whole-archive' \
-	SHAREDFLAGS="-shared -Wl,-Bsymbolic -Wl,--out-implib,lib$(LIBNAME).dll.a" \
+	SHLIB=cyg$(LIBNAME); \
+	SHLIB_SUFFIX=.dll; \
+	LIBDEPS="$(LIBDEPS) -lc"; \
+	SHLIB_SOVER=; \
+	ALLSYMSFLAGS='-Wl,--whole-archive'; \
+	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
+	SHAREDFLAGS="-shared -Wl,-Bsymbolic -Wl,--out-implib,lib$(LIBNAME).dll.a"; \
 	SHAREDCMD='${CC}'; \
 	$(LINK_SO_A)
+link_app.cygwin:
+	LDCMD=$(CC);\
+	LDFLAGS=""; \
+	LIBDEPS="$(LIBDEPS) -lc"; \
+	APPNAME="$(APPNAME).exe"
+	$(LINK_APP)

 link_o.alpha-osf1:
 	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU); \
+		$(DO_GNU_SO); \
 	else \
-		SHLIB=lib$(LIBNAME).so \
-		SHLIB_SUFFIX= \
-		LIBDEPS="$(LIBDEPS) -lc" \
+		SHLIB=lib$(LIBNAME).so; \
+		SHLIB_SUFFIX=; \
+		LIBDEPS="$(LIBDEPS) -lc"; \
 		SHLIB_HIST=`echo "$(LIBCOMPATVERSIONS)" | cut -d';' -f2 | sed -e 's/ */:/'`; \
 		if [ -n "$$SHLIB_HIST" ]; then \
 			SHLIB_HIST="$${SHLIB_HIST}:$(LIBVERSION)"; \
 		else \
 			SHLIB_HIST="$(LIBVERSION)"; \
-		fi
-		SHLIB_SOVER= \
-		ALLSYMSFLAGS='-all' \
-		NOALLSYMSFLAGS='-none' \
-		SHAREDFLAGS="-shared" \
+		fi; \
+		SHLIB_SOVER=; \
+		ALLSYMSFLAGS='-all'; \
+		NOALLSYMSFLAGS='-none'; \
+		SHAREDFLAGS="-shared"; \
 		SHAREDCMD='$(CC)'; \
 		if [ -n "$$SHLIB_HIST" ]; then \
-			SHAREDFLAGS="$SHAREDFLAGS -set_version \"$$SHLIB_HIST\""; \
+			SHAREDFLAGS="$$SHAREDFLAGS -set_version \"$$SHLIB_HIST\""; \
 		fi; \
 	fi; \
 	$(LINK_SO_O)
 link_a.alpha-osf1:
 	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU); \
+		$(DO_GNU_SO); \
 	else \
-		SHLIB=lib$(LIBNAME).so \
-		SHLIB_SUFFIX= \
-		LIBDEPS="$(LIBDEPS) -lc" \
+		SHLIB=lib$(LIBNAME).so; \
+		SHLIB_SUFFIX=; \
+		LIBDEPS="$(LIBDEPS) -lc"; \
 		SHLIB_HIST=`echo "$(LIBCOMPATVERSIONS)" | cut -d';' -f2 | sed -e 's/ */:/'`; \
 		if [ -n "$$SHLIB_HIST" ]; then \
 			SHLIB_HIST="$${SHLIB_HIST}:$(LIBVERSION)"; \
 		else \
 			SHLIB_HIST="$(LIBVERSION)"; \
-		fi
-		SHLIB_SOVER= \
-		ALLSYMSFLAGS='-all' \
-		NOALLSYMSFLAGS='-none' \
-		SHAREDFLAGS="-shared" \
+		fi; \
+		SHLIB_SOVER=; \
+		ALLSYMSFLAGS='-all'; \
+		NOALLSYMSFLAGS='-none'; \
+		SHAREDFLAGS="-shared"; \
 		SHAREDCMD='$(CC)'; \
 		if [ -n "$$SHLIB_HIST" ]; then \
-			SHAREDFLAGS="$SHAREDFLAGS -set_version \"$$SHLIB_HIST\""; \
+			SHAREDFLAGS="$$SHAREDFLAGS -set_version \"$$SHLIB_HIST\""; \
 		fi; \
 	fi; \
 	$(LINK_SO_A)
+link_app.alpha-osf1:
+	@ if ${DETECT_GNU_LD}; then \
+		$(DO_GNU_APP); \
+	else \
+		LDCMD=$(CC);\
+		LDFLAGS=""; \
+		LIBDEPS="$(LIBDEPS) -lc"; \
+		APPNAME="$(APPNAME)"
+	fi; \
+	$(LINK_APP)

 # The difference between alpha-osf1-shared and tru64-shared is the `-msym'
 # option passed to the linker.
 link_o.tru64:
 	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU); \
+		$(DO_GNU_SO); \
 	else \
-		SHLIB=lib$(LIBNAME).so \
-		SHLIB_SUFFIX= \
-		LIBDEPS="$(LIBDEPS) -lc" \
+		SHLIB=lib$(LIBNAME).so; \
+		SHLIB_SUFFIX=; \
+		LIBDEPS="$(LIBDEPS) -lc"; \
 		SHLIB_HIST=`echo "$(LIBCOMPATVERSIONS)" | cut -d';' -f2 | sed -e 's/ */:/'`; \
 		if [ -n "$$SHLIB_HIST" ]; then \
 			SHLIB_HIST="$${SHLIB_HIST}:$(LIBVERSION)"; \
 		else \
 			SHLIB_HIST="$(LIBVERSION)"; \
-		fi
-		SHLIB_SOVER= \
-		ALLSYMSFLAGS='-all' \
-		NOALLSYMSFLAGS='-none' \
-		SHAREDFLAGS="-shared -msym" \
+		fi; \
+		SHLIB_SOVER=; \
+		ALLSYMSFLAGS='-all'; \
+		NOALLSYMSFLAGS='-none'; \
+		SHAREDFLAGS="-shared -msym -rpath $(LIBRPATH)"; \
 		SHAREDCMD='$(CC)'; \
 		if [ -n "$$SHLIB_HIST" ]; then \
-			SHAREDFLAGS="$SHAREDFLAGS -set_version \"$$SHLIB_HIST\""; \
+			SHAREDFLAGS="$$SHAREDFLAGS -set_version \"$$SHLIB_HIST\""; \
 		fi; \
 	fi; \
 	$(LINK_SO_O)
 link_a.tru64:
 	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU); \
+		$(DO_GNU_SO); \
 	else \
-		SHLIB=lib$(LIBNAME).so \
-		SHLIB_SUFFIX= \
-		LIBDEPS="$(LIBDEPS) -lc" \
+		SHLIB=lib$(LIBNAME).so; \
+		SHLIB_SUFFIX=; \
+		LIBDEPS="$(LIBDEPS) -lc"; \
 		SHLIB_HIST=`echo "$(LIBCOMPATVERSIONS)" | cut -d';' -f2 | sed -e 's/ */:/'`; \
 		if [ -n "$$SHLIB_HIST" ]; then \
 			SHLIB_HIST="$${SHLIB_HIST}:$(LIBVERSION)"; \
 		else \
 			SHLIB_HIST="$(LIBVERSION)"; \
-		fi
-		SHLIB_SOVER= \
-		ALLSYMSFLAGS='-all' \
-		NOALLSYMSFLAGS='-none' \
-		SHAREDFLAGS="-shared -msym" \
+		fi; \
+		SHLIB_SOVER=; \
+		ALLSYMSFLAGS='-all'; \
+		NOALLSYMSFLAGS='-none'; \
+		SHAREDFLAGS="-shared -msym -rpath $(LIBRPATH)"; \
 		SHAREDCMD='$(CC)'; \
 		if [ -n "$$SHLIB_HIST" ]; then \
-			SHAREDFLAGS="$SHAREDFLAGS -set_version \"$$SHLIB_HIST\""; \
+			SHAREDFLAGS="$$SHAREDFLAGS -set_version \"$$SHLIB_HIST\""; \
 		fi; \
 	fi; \
 	$(LINK_SO_A)
+link_app.tru64:
+	@ if ${DETECT_GNU_LD}; then \
+		$(DO_GNU_APP); \
+	else \
+		LDCMD=$(CC);\
+		LDFLAGS="-rpath $(LIBRPATH)"; \
+		LIBDEPS="$(LIBDEPS) -lc"; \
+		APPNAME="$(APPNAME)"; \
+	fi; \
+	$(LINK_APP)

 # The difference between tru64-shared and tru64-shared-rpath is the
 # -rpath ${LIBRPATH} passed to the linker.
 link_o.tru64-rpath:
 	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU); \
+		$(DO_GNU_SO); \
 	else \
-		SHLIB=lib$(LIBNAME).so \
-		SHLIB_SUFFIX= \
-		LIBDEPS="$(LIBDEPS) -lc" \
+		SHLIB=lib$(LIBNAME).so; \
+		SHLIB_SUFFIX=; \
+		LIBDEPS="$(LIBDEPS) -lc"; \
 		SHLIB_HIST=`echo "$(LIBCOMPATVERSIONS)" | cut -d';' -f2 | sed -e 's/ */:/'`; \
 		if [ -n "$$SHLIB_HIST" ]; then \
 			SHLIB_HIST="$${SHLIB_HIST}:$(LIBVERSION)"; \
 		else \
 			SHLIB_HIST="$(LIBVERSION)"; \
-		fi
-		SHLIB_SOVER= \
-		ALLSYMSFLAGS='-all' \
-		NOALLSYMSFLAGS='-none' \
-		SHAREDFLAGS="-shared -msym -rpath $(LIBRPATH)" \
+		fi; \
+		SHLIB_SOVER=; \
+		ALLSYMSFLAGS='-all'; \
+		NOALLSYMSFLAGS='-none'; \
+		SHAREDFLAGS="-shared -msym -rpath $(LIBRPATH)"; \
 		SHAREDCMD='$(CC)'; \
 		if [ -n "$$SHLIB_HIST" ]; then \
-			SHAREDFLAGS="$SHAREDFLAGS -set_version \"$$SHLIB_HIST\""; \
+			SHAREDFLAGS="$$SHAREDFLAGS -set_version \"$$SHLIB_HIST\""; \
 		fi; \
 	fi; \
 	$(LINK_SO_O)
 link_a.tru64-rpath:
 	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU); \
+		$(DO_GNU_SO); \
 	else \
-		SHLIB=lib$(LIBNAME).so \
-		SHLIB_SUFFIX= \
-		LIBDEPS="$(LIBDEPS) -lc" \
+		SHLIB=lib$(LIBNAME).so; \
+		SHLIB_SUFFIX=; \
+		LIBDEPS="$(LIBDEPS) -lc"; \
 		SHLIB_HIST=`echo "$(LIBCOMPATVERSIONS)" | cut -d';' -f2 | sed -e 's/ */:/'`; \
 		if [ -n "$$SHLIB_HIST" ]; then \
 			SHLIB_HIST="$${SHLIB_HIST}:$(LIBVERSION)"; \
 		else \
 			SHLIB_HIST="$(LIBVERSION)"; \
-		fi
-		SHLIB_SOVER= \
-		ALLSYMSFLAGS='-all' \
-		NOALLSYMSFLAGS='-none' \
-		SHAREDFLAGS="-shared -msym -rpath $(LIBRPATH)" \
+		fi; \
+		SHLIB_SOVER=; \
+		ALLSYMSFLAGS='-all'; \
+		NOALLSYMSFLAGS='-none'; \
+		SHAREDFLAGS="-shared -msym -rpath $(LIBRPATH)"; \
 		SHAREDCMD='$(CC)'; \
 		if [ -n "$$SHLIB_HIST" ]; then \
-			SHAREDFLAGS="$SHAREDFLAGS -set_version \"$$SHLIB_HIST\""; \
+			SHAREDFLAGS="$$SHAREDFLAGS -set_version \"$$SHLIB_HIST\""; \
 		fi; \
 	fi; \
 	$(LINK_SO_A)
+link_app.tru64-rpath:
+	@ if ${DETECT_GNU_LD}; then \
+		$(DO_GNU_APP); \
+	else \
+		LDCMD=$(CC);\
+		LDFLAGS="-rpath $(LIBRPATH)"; \
+		LIBDEPS="$(LIBDEPS) -lc"; \
+		APPNAME="$(APPNAME)"; \
+	fi; \
+	$(LINK_APP)

 link_o.solaris:
 	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU); \
+		$(DO_GNU_SO); \
 	else \
 		$(CALC_VERSIONS); \
-		SHLIB=lib$(LIBNAME).so \
-		SHLIB_SUFFIX= \
-		LIBDEPS="$(LIBDEPS) -lc" \
-		ALLSYMSFLAGS='-z allextract' \
-		NOALLSYMSFLAGS='' \
-		SHAREDFLAGS='-G -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX' \
+		MINUSZ='-z '; \
+		(${CC} -v 2>&1 | grep gcc) > /dev/null && MINUSZ='-Wl,-z,'; \
+		SHLIB=lib$(LIBNAME).so; \
+		SHLIB_SUFFIX=; \
+		LIBDEPS="$(LIBDEPS) -lc"; \
+		ALLSYMSFLAGS="$${MINUSZ}allextract"; \
+		NOALLSYMSFLAGS="$${MINUSZ}defaultextract"; \
+		SHAREDFLAGS="-G -dy -z text -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX -R $(LIBRPATH)"; \
 		SHAREDCMD='$(CC)'; \
 	fi; \
 	$(LINK_SO_O)
 link_a.solaris:
 	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU); \
+		$(DO_GNU_SO); \
 	else \
 		$(CALC_VERSIONS); \
-		SHLIB=lib$(LIBNAME).so \
-		SHLIB_SUFFIX= \
-		LIBDEPS="$(LIBDEPS) -lc" \
-		ALLSYMSFLAGS='-z allextract' \
-		NOALLSYMSFLAGS='' \
-		SHAREDFLAGS='-G -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX' \
+		MINUSZ='-z '; \
+		(${CC} -v 2>&1 | grep gcc) > /dev/null && MINUSZ='-Wl,-z,'; \
+		SHLIB=lib$(LIBNAME).so; \
+		SHLIB_SUFFIX=;\
+		LIBDEPS="$(LIBDEPS) -lc"; \
+		ALLSYMSFLAGS="$${MINUSZ}allextract"; \
+		NOALLSYMSFLAGS="$${MINUSZ}defaultextract"; \
+		SHAREDFLAGS="-G -dy -z text -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX -R $(LIBRPATH)"; \
 		SHAREDCMD='$(CC)'; \
 	fi; \
 	$(LINK_SO_A)
+link_app.solaris:
+	@ if ${DETECT_GNU_LD}; then \
+		$(DO_GNU_APP); \
+	else \
+		LDCMD=$(CC);\
+		LDFLAGS="-R $(LIBRPATH)"; \
+		LIBDEPS="$(LIBDEPS) -lc"; \
+		APPNAME="$(APPNAME)"; \
+	fi; \
+	$(LINK_APP)

 # OpenServer 5 native compilers used
-# UnixWare 7 and OpenUNIX 8 native compilers used
 link_o.svr3:
 	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU); \
+		$(DO_GNU_SO); \
 	else \
 		$(CALC_VERSIONS); \
-		SHLIB=lib$(LIBNAME).so \
-		SHLIB_SUFFIX= \
-		LIBDEPS="$(LIBDEPS) -lc" \
-		ALLSYMSFLAGS='-z allextract' \
-		NOALLSYMSFLAGS='' \
-		SHAREDFLAGS='-G -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX' \
+		SHLIB=lib$(LIBNAME).so; \
+		SHLIB_SUFFIX=; \
+		LIBDEPS="$(LIBDEPS) -lc"; \
+		ALLSYMSFLAGS=''; \
+		NOALLSYMSFLAGS=''; \
+		SHAREDFLAGS="-G -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"; \
 		SHAREDCMD='$(CC)'; \
 	fi; \
 	$(LINK_SO_O)
 link_a.svr3:
 	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU); \
+		$(DO_GNU_SO); \
 	else \
 		$(CALC_VERSIONS); \
-		SHLIB=lib$(LIBNAME).so \
-		SHLIB_SUFFIX= \
-		LIBDEPS="$(LIBDEPS) -lc" \
-		ALLSYMSFLAGS='-z allextract' \
-		NOALLSYMSFLAGS='' \
-		SHAREDFLAGS='-G -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX' \
+		SHLIB=lib$(LIBNAME).so; \
+		SHLIB_SUFFIX=; \
+		LIBDEPS="$(LIBDEPS) -lc"; \
+		ALLSYMSFLAGS=''; \
+		NOALLSYMSFLAGS=''; \
+		SHAREDFLAGS="-G -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"; \
 		SHAREDCMD='$(CC)'; \
 	fi; \
 	$(LINK_SO_A_UNPACKED)
+link_app.svr3:
+	@ if ${DETECT_GNU_LD}; then \
+		$(DO_GNU_APP); \
+	else \
+		LDCMD=$(CC);\
+		LDFLAGS=""; \
+		LIBDEPS="$(LIBDEPS) -lc"; \
+		APPNAME="$(APPNAME)"; \
+	fi; \
+	$(LINK_APP)
+
+# UnixWare 7 and OpenUNIX 8 native compilers used
+link_o.svr5:
+	@ if ${DETECT_GNU_LD}; then \
+		$(DO_GNU_SO); \
+	else \
+		$(CALC_VERSIONS); \
+		SHARE_FLAG='-G'; \
+		(${CC} -v 2>&1 | grep gcc) > /dev/null && SHARE_FLAG='-shared'; \
+		SHLIB=lib$(LIBNAME).so; \
+		SHLIB_SUFFIX=; \
+		LIBDEPS="$(LIBDEPS) -lc"; \
+		ALLSYMSFLAGS=''; \
+		NOALLSYMSFLAGS=''; \
+		SHAREDFLAGS="$${SHARE_FLAG} -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"; \
+		SHAREDCMD='$(CC)'; \
+	fi; \
+	$(LINK_SO_O)
+link_a.svr5:
+	@ if ${DETECT_GNU_LD}; then \
+		$(DO_GNU_SO); \
+	else \
+		$(CALC_VERSIONS); \
+		SHARE_FLAG='-G'; \
+		(${CC} -v 2>&1 | grep gcc) > /dev/null && SHARE_FLAG='-shared'; \
+		SHLIB=lib$(LIBNAME).so; \
+		SHLIB_SUFFIX=; \
+		LIBDEPS="$(LIBDEPS) -lc"; \
+		ALLSYMSFLAGS=''; \
+		NOALLSYMSFLAGS=''; \
+		SHAREDFLAGS="$${SHARE_FLAG} -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"; \
+		SHAREDCMD='$(CC)'; \
+	fi; \
+	$(LINK_SO_A_UNPACKED)
+link_app.svr5:
+	@ if ${DETECT_GNU_LD}; then \
+		$(DO_GNU_APP); \
+	else \
+		LDCMD=$(CC);\
+		LDFLAGS=""; \
+		LIBDEPS="$(LIBDEPS) -lc"; \
+		APPNAME="$(APPNAME)"; \
+	fi; \
+	$(LINK_APP)

 link_o.irix:
 	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU); \
+		$(DO_GNU_SO); \
 	else \
 		$(CALC_VERSIONS); \
-		SHLIB=lib$(LIBNAME).so \
-		SHLIB_SUFFIX= \
-		LIBDEPS="$(LIBDEPS) -lc" \
-		ALLSYMSFLAGS='-all' \
-		NOALLSYMSFLAGS='' \
-		SHAREDFLAGS='-shared -Wl,-soname,$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX' \
+		SHLIB=lib$(LIBNAME).so; \
+		SHLIB_SUFFIX=; \
+		LIBDEPS="$(LIBDEPS) -lc"; \
+		MINUSWL=""; \
+		($(CC) -v 2>&1 | grep gcc) > /dev/null && MINUSWL="-Wl,"; \
+		ALLSYMSFLAGS="$${MINUSWL}-all"; \
+		NOALLSYMSFLAGS="$${MINUSWL}-notall"; \
+		SHAREDFLAGS="-shared -Wl,-soname,$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX -Wl,-rpath,$(LIBRPATH)"; \
 		SHAREDCMD='$(CC)'; \
 	fi; \
 	$(LINK_SO_O)
 link_a.irix:
 	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU); \
+		$(DO_GNU_SO); \
 	else \
 		$(CALC_VERSIONS); \
-		SHLIB=lib$(LIBNAME).so \
-		SHLIB_SUFFIX= \
-		LIBDEPS="$(LIBDEPS) -lc" \
-		ALLSYMSFLAGS='-all' \
-		NOALLSYMSFLAGS='' \
-		SHAREDFLAGS='-shared -Wl,-soname,$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX' \
+		SHLIB=lib$(LIBNAME).so; \
+		SHLIB_SUFFIX=; \
+		LIBDEPS="$(LIBDEPS) -lc"; \
+		MINUSWL=""; \
+		($(CC) -v 2>&1 | grep gcc) > /dev/null && MINUSWL="-Wl,"; \
+		ALLSYMSFLAGS="$${MINUSWL}-all"; \
+		NOALLSYMSFLAGS="$${MINUSWL}-notall"; \
+		SHAREDFLAGS="-shared -Wl,-soname,$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX -Wl,-rpath,$(LIBRPATH)"; \
 		SHAREDCMD='$(CC)'; \
 	fi; \
 	$(LINK_SO_A)
+link_app.irix:
+	@ if ${DETECT_GNU_LD}; then \
+		$(DO_GNU_APP); \
+	else \
+		LDCMD=$(CC);\
+		LDFLAGS="-Wl,-rpath,$(LIBRPATH)"; \
+		LIBDEPS="$(LIBDEPS) -lc"; \
+		APPNAME="$(APPNAME)"; \
+	fi; \
+	$(LINK_APP)

 # HP-UX includes the full pathname of libs we depend on, so we would get
 # ./libcrypto (with ./ as path information) compiled into libssl, hence
@@ -431,24 +595,30 @@ link_a.irix:
 #
 link_o.hpux32:
 	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).sl \
-	SHLIB_SUFFIX= \
-	LIBDEPS="$(LIBDEPS) -lc" \
-	ALLSYMSFLAGS='-Fl' \
-	NOALLSYMSFLAGS='' \
-	SHAREDFLAGS='+vnocompatwarnings -b -z +s +h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX' \
+	SHLIB=lib$(LIBNAME).sl; \
+	SHLIB_SUFFIX=; \
+	LIBDEPS="$(LIBDEPS) -lc"; \
+	ALLSYMSFLAGS='-Fl'; \
+	NOALLSYMSFLAGS=''; \
+	SHAREDFLAGS="+vnocompatwarnings -b -z +s +h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX +b $(LIBRPATH)"; \
 	SHAREDCMD='/usr/ccs/bin/ld'; \
 	$(LINK_SO_O) && chmod a=rx $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX
 link_a.hpux32:
 	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).sl \
-	SHLIB_SUFFIX= \
-	LIBDEPS="$(LIBDEPS) -lc" \
-	ALLSYMSFLAGS='-Fl' \
-	NOALLSYMSFLAGS='' \
-	SHAREDFLAGS='+vnocompatwarnings -b -z +s +h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX' \
+	SHLIB=lib$(LIBNAME).sl; \
+	SHLIB_SUFFIX=; \
+	LIBDEPS="$(LIBDEPS) -lc"; \
+	ALLSYMSFLAGS='-Fl'; \
+	NOALLSYMSFLAGS=''; \
+	SHAREDFLAGS="+vnocompatwarnings -b -z +s +h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX +b $(LIBRPATH)"; \
 	SHAREDCMD='/usr/ccs/bin/ld'; \
 	$(LINK_SO_A) && chmod a=rx $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX
+link_app.hpux32:
+	LDCMD=$(CC);\
+	LDFLAGS="-Wl,+b,$(LIBRPATH)"; \
+	LIBDEPS="$(LIBDEPS) -lc"; \
+	APPNAME="$(APPNAME)"
+	$(LINK_APP)

 # HP-UX includes the full pathname of libs we depend on, so we would get
 # ./libcrypto (with ./ as path information) compiled into libssl, hence
@@ -460,76 +630,94 @@ link_a.hpux32:
 #
 link_o.hpux64:
 	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).sl \
-	SHLIB_SUFFIX= \
-	LIBDEPS="$(LIBDEPS) -lc" \
-	ALLSYMSFLAGS='+forceload' \
-	NOALLSYMSFLAGS='' \
-	SHAREDFLAGS='-b -z +h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX' \
+	SHLIB=lib$(LIBNAME).sl; \
+	SHLIB_SUFFIX=; \
+	LIBDEPS="$(LIBDEPS) -lc"; \
+	ALLSYMSFLAGS='+forceload'; \
+	NOALLSYMSFLAGS=''; \
+	SHAREDFLAGS="-b -z +h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX +b $(LIBRPATH)"; \
 	SHAREDCMD='/usr/ccs/bin/ld'; \
 	$(LINK_SO_O) && chmod a=rx $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX
 link_a.hpux64:
 	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).sl \
-	SHLIB_SUFFIX= \
-	LIBDEPS="$(LIBDEPS) -lc" \
-	ALLSYMSFLAGS='+forceload' \
-	NOALLSYMSFLAGS='' \
-	SHAREDFLAGS='-b -z +h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX' \
+	SHLIB=lib$(LIBNAME).sl; \
+	SHLIB_SUFFIX=; \
+	LIBDEPS="$(LIBDEPS) -lc"; \
+	ALLSYMSFLAGS='+forceload'; \
+	NOALLSYMSFLAGS=''; \
+	SHAREDFLAGS="-b -z +h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX +b $(LIBRPATH)"; \
 	SHAREDCMD='/usr/ccs/bin/ld'; \
 	$(LINK_SO_A) && chmod a=rx $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX
+link_app.hpux64:
+	LDCMD=$(CC);\
+	LDFLAGS="-Wl,+b,$(LIBRPATH)"; \
+	LIBDEPS="$(LIBDEPS) -lc"; \
+	APPNAME="$(APPNAME)"
+	$(LINK_APP)

 link_o.aix:
 	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).so \
-	SHLIB_SUFFIX= \
-	LIBDEPS="$(LIBDEPS) -lc" \
-	ALLSYMSFLAGS='-bnogc' \
-	NOALLSYMSFLAGS='' \
-	SHAREDFLAGS='-G -bE:lib$(LIBNAME).exp -bM:SRE' \
+	SHLIB=lib$(LIBNAME).so; \
+	SHLIB_SUFFIX=; \
+	LIBDEPS="$(LIBDEPS) -lc"; \
+	ALLSYMSFLAGS='-bnogc'; \
+	NOALLSYMSFLAGS=''; \
+	SHAREDFLAGS='-G -bE:lib$(LIBNAME).exp -bM:SRE -blibpath:$(LIBRPATH)'; \
 	SHAREDCMD='$(CC)'; \
 	$(LINK_SO_O)
 link_a.aix:
 	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).so \
-	SHLIB_SUFFIX= \
-	LIBDEPS="$(LIBDEPS) -lc" \
-	ALLSYMSFLAGS='-bnogc' \
-	NOALLSYMSFLAGS='' \
-	SHAREDFLAGS='-G -bE:lib$(LIBNAME).exp -bM:SRE' \
+	SHLIB=lib$(LIBNAME).so; \
+	SHLIB_SUFFIX=; \
+	LIBDEPS="$(LIBDEPS) -lc"; \
+	ALLSYMSFLAGS='-bnogc'; \
+	NOALLSYMSFLAGS=''; \
+	SHAREDFLAGS='-G -bE:lib$(LIBNAME).exp -bM:SRE -blibpath:$(LIBRPATH)'; \
 	SHAREDCMD='$(CC)'; \
 	$(LINK_SO_A_VIA_O)
+link_app.aix:
+	LDCMD=$(CC);\
+	LDFLAGS="-blibpath:$(LIBRPATH)"; \
+	LIBDEPS="$(LIBDEPS) -lc"; \
+	APPNAME="$(APPNAME)"
+	$(LINK_APP)

 link_o.reliantunix:
 	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).so \
-	SHLIB_SUFFIX= \
-	LIBDEPS="$(LIBDEPS) -lc" \
-	ALLSYMSFLAGS= \
-	NOALLSYMSFLAGS='' \
-	SHAREDFLAGS='-G' \
+	SHLIB=lib$(LIBNAME).so; \
+	SHLIB_SUFFIX=; \
+	LIBDEPS="$(LIBDEPS) -lc"; \
+	ALLSYMSFLAGS=; \
+	NOALLSYMSFLAGS=''; \
+	SHAREDFLAGS='-G'; \
 	SHAREDCMD='$(CC)'; \
 	$(LINK_SO_O)
 link_a.reliantunix:
 	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).so \
-	SHLIB_SUFFIX= \
-	LIBDEPS="$(LIBDEPS) -lc" \
-	ALLSYMSFLAGS= \
-	NOALLSYMSFLAGS='' \
-	SHAREDFLAGS='-G' \
+	SHLIB=lib$(LIBNAME).so; \
+	SHLIB_SUFFIX=; \
+	LIBDEPS="$(LIBDEPS) -lc"; \
+	ALLSYMSFLAGS=; \
+	NOALLSYMSFLAGS=''; \
+	SHAREDFLAGS='-G'; \
 	SHAREDCMD='$(CC)'; \
 	$(LINK_SO_A_UNPACKED)
+link_app.reliantunix:
+	LDCMD=$(CC);\
+	LDFLAGS=""; \
+	LIBDEPS="$(LIBDEPS) -lc"; \
+	APPNAME="$(APPNAME)"
+	$(LINK_APP)

 # Targets to build symbolic links when needed
-symlink.gnu symlink.solaris symlink.svr3 symlink.irix \
+symlink.gnu symlink.solaris symlink.svr3 symlink.svr5 symlink.irix \
 symlink.aix symlink.reliantunix:
 	@ $(CALC_VERSIONS); \
 	SHLIB=lib$(LIBNAME).so; \
 	$(SYMLINK_SO)
 symlink.darwin:
 	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME) \
+	SHLIB=lib$(LIBNAME); \
 	SHLIB_SUFFIX=.dylib; \
 	$(SYMLINK_SO)
 symlink.hpux32 symlink.hpux64:
@@ -542,43 +730,57 @@ symlink.cygwin symlib.alpha-osf1 symlink.tru64 symlink.tru64-rpath:
 # Compatibility targets
 link_o.bsd-gcc-shared link_o.linux-shared link_o.gnu-shared: link_o.gnu
 link_a.bsd-gcc-shared link_a.linux-shared link_a.gnu-shared: link_a.gnu
+link_app.bsd-gcc-shared link_app.linux-shared link_app.gnu-shared: link_app.gnu
 symlink.bsd-gcc-shared symlink.linux-shared symlink.gnu-shared: symlink.gnu
 link_o.darwin-shared: link_o.darwin
 link_a.darwin-shared: link_a.darwin
+link_app.darwin-shared: link_app.darwin
 symlink.darwin-shared: symlink.darwin
 link_o.cygwin-shared: link_o.cygwin
 link_a.cygwin-shared: link_a.cygwin
+link_app.cygwin-shared: link_app.cygwin
 symlink.cygwin-shared: symlink.cygwin
 link_o.alpha-osf1-shared: link_o.alpha-osf1
 link_a.alpha-osf1-shared: link_a.alpha-osf1
+link_app.alpha-osf1-shared: link_app.alpha-osf1
 symlink.alpha-osf1-shared: symlink.alpha-osf1
 link_o.tru64-shared: link_o.tru64
 link_a.tru64-shared: link_a.tru64
+link_app.tru64-shared: link_app.tru64
 symlink.tru64-shared: symlink.tru64
 link_o.tru64-shared-rpath: link_o.tru64-rpath
 link_a.tru64-shared-rpath: link_a.tru64-rpath
+link_app.tru64-shared-rpath: link_app.tru64-rpath
 symlink.tru64-shared-rpath: symlink.tru64-rpath
 link_o.solaris-shared: link_o.solaris
 link_a.solaris-shared: link_a.solaris
+link_app.solaris-shared: link_app.solaris
 symlink.solaris-shared: symlink.solaris
 link_o.svr3-shared: link_o.svr3
 link_a.svr3-shared: link_a.svr3
+link_app.svr3-shared: link_app.svr3
 symlink.svr3-shared: symlink.svr3
-link_o.svr5-shared: link_o.svr3
-link_a.svr5-shared: link_a.svr3
-symlink.svr5-shared: symlink.svr3
+link_o.svr5-shared: link_o.svr5
+link_a.svr5-shared: link_a.svr5
+link_app.svr5-shared: link_app.svr5
+symlink.svr5-shared: symlink.svr5
 link_o.irix-shared: link_o.irix
 link_a.irix-shared: link_a.irix
+link_app.irix-shared: link_app.irix
 symlink.irix-shared: symlink.irix
 link_o.hpux-shared: link_o.hpux32
 link_a.hpux-shared: link_a.hpux32
+link_app.hpux-shared: link_app.hpux32
 symlink.hpux-shared: symlink.hpux32
 link_o.hpux64-shared: link_o.hpux64
 link_a.hpux64-shared: link_a.hpux64
+link_app.hpux64-shared: link_app.hpux64
 symlink.hpux64-shared: symlink.hpux64
 link_o.aix-shared: link_o.aix
 link_a.aix-shared: link_a.aix
+link_app.aix-shared: link_app.aix
 symlink.aix-shared: symlink.aix
 link_o.reliantunix-shared: link_o.reliantunix
 link_a.reliantunix-shared: link_a.reliantunix
+link_app.reliantunix-shared: link_app.reliantunix
 symlink.reliantunix-shared: symlink.reliantunix
--- a/52
+++ b/52
@@ -5,6 +5,35 @@
  This file gives a brief overview of the major changes between each OpenSSL
  release. For more details please read the CHANGES file.

+  Major changes between OpenSSL 0.9.7b and OpenSSL 0.9.7c:
+
+      o Security: fix various ASN1 parsing bugs.
+      o New -ignore_err option to OCSP utility.
+      o Various interop and bug fixes in S/MIME code.
+      o SSL/TLS protocol fix for unrequested client certificates.
+
+  Major changes between OpenSSL 0.9.7a and OpenSSL 0.9.7b:
+
+      o Security: counter the Klima-Pokorny-Rosa extension of
+        Bleichbacher's attack 
+      o Security: make RSA blinding default.
+      o Configuration: Irix fixes, AIX fixes, better mingw support.
+      o Support for new platforms: linux-ia64-ecc.
+      o Build: shared library support fixes.
+      o ASN.1: treat domainComponent correctly.
+      o Documentation: fixes and additions.
+
+  Major changes between OpenSSL 0.9.7 and OpenSSL 0.9.7a:
+
+      o Security: Important security related bugfixes.
+      o Enhanced compatibility with MIT Kerberos.
+      o Can be built without the ENGINE framework.
+      o IA32 assembler enhancements.
+      o Support for new platforms: FreeBSD/IA64 and FreeBSD/Sparc64.
+      o Configuration: the no-err option now works properly.
+      o SSL/TLS: now handles manual certificate chain building.
+      o SSL/TLS: certain session ID malfunctions corrected.
+
  Major changes between OpenSSL 0.9.6 and OpenSSL 0.9.7:

      o New library section OCSP.
@@ -17,11 +46,15 @@
        a separate distribution.
      o New elliptic curve library section.
      o New AES (Rijndael) library section.
-      o Support for new platforms: Windows CE, Tandem OSS, A/UX, AIX 64-bit
+      o Support for new platforms: Windows CE, Tandem OSS, A/UX, AIX 64-bit,
+        Linux x86_64, Linux 64-bit on Sparc v9
      o Extended support for some platforms: VxWorks
      o Enhanced support for shared libraries.
+      o Now only builds PIC code when shared library support is requested.
      o Support for pkg-config.
      o Lots of new manuals.
+      o Makes symbolic links to or copies of manuals to cover all described
+        functions.
      o Change DES API to clean up the namespace (some applications link also
        against libdes providing similar functions having the same name).
        Provide macros for backward compatibility (will be removed in the
@@ -42,10 +75,27 @@
      o SSL/TLS: allow optional cipher choice according to server's preference.
      o SSL/TLS: allow server to explicitly set new session ids.
      o SSL/TLS: support Kerberos cipher suites (RFC2712).
+	Only supports MIT Kerberos for now.
      o SSL/TLS: allow more precise control of renegotiations and sessions.
      o SSL/TLS: add callback to retrieve SSL/TLS messages.
      o SSL/TLS: support AES cipher suites (RFC3268).

+  Major changes between OpenSSL 0.9.6j and OpenSSL 0.9.6k:
+
+      o Security: fix various ASN1 parsing bugs.
+      o SSL/TLS protocol fix for unrequested client certificates.
+
+  Major changes between OpenSSL 0.9.6i and OpenSSL 0.9.6j:
+
+      o Security: counter the Klima-Pokorny-Rosa extension of
+        Bleichbacher's attack 
+      o Security: make RSA blinding default.
+      o Build: shared library support fixes.
+
+  Major changes between OpenSSL 0.9.6h and OpenSSL 0.9.6i:
+
+      o Important security related bugfixes.
+
  Major changes between OpenSSL 0.9.6g and OpenSSL 0.9.6h:

      o New configuration targets for Tandem OSS and A/UX.
--- a/Netware/build.bat
+++ b/Netware/build.bat
@@ -0,0 +1,204 @@
+@echo off
+
+rem ========================================================================
+rem   Batch file to automate building OpenSSL for NetWare.
+rem
+rem   usage:
+rem      build [target] [debug opts] [assembly opts] [configure opts]
+rem
+rem      target        - "netware-clib" - CLib NetWare build
+rem                    - "netware-libc" - LibC NKS NetWare build
+rem 
+rem      debug opts    - "debug"  - build debug
+rem
+rem      assembly opts - "nw-mwasm" - use Metrowerks assembler
+rem      "nw-nasm"  - use NASM assembler
+rem      "no-asm"   - don't use assembly
+rem
+rem      configure opts- all unrecognized arguments are passed to the
+rem                       perl configure script
+rem
+rem   If no arguments are specified the default is to build non-debug with
+rem   no assembly.  NOTE: there is no default BLD_TARGET.
+rem
+
+
+
+rem   No assembly is the default - Uncomment section below to change
+rem   the assembler default
+set ASM_MODE=
+set ASSEMBLER=
+set NO_ASM=no-asm
+
+rem   Uncomment to default to the Metrowerks assembler
+rem set ASM_MODE=nw-mwasm
+rem set ASSEMBLER=Metrowerks
+rem set NO_ASM=
+
+rem   Uncomment to default to the NASM assembler
+rem set ASM_MODE=nw-nasm
+rem set ASSEMBLER=NASM
+rem set NO_ASM=
+
+rem   No default Bld target
+set BLD_TARGET=no_target
+rem set BLD_TARGET=netware-clib
+rem set BLD_TARGET=netware-libc
+
+
+rem   Default to build non-debug
+set DEBUG=
+                                    
+rem   Uncomment to default to debug build
+rem set DEBUG=debug
+
+
+set CONFIG_OPTS=
+set ARG_PROCESSED=NO
+
+
+rem   Process command line args
+:opts
+if "a%1" == "a" goto endopt
+if "%1" == "no-asm"   set NO_ASM=no-asm
+if "%1" == "no-asm"   set ARG_PROCESSED=YES
+if "%1" == "debug"    set DEBUG=debug
+if "%1" == "debug"    set ARG_PROCESSED=YES
+if "%1" == "nw-nasm"  set ASM_MODE=nw-nasm
+if "%1" == "nw-nasm"  set ASSEMBLER=NASM
+if "%1" == "nw-nasm"  set NO_ASM=
+if "%1" == "nw-nasm"  set ARG_PROCESSED=YES
+if "%1" == "nw-mwasm" set ASM_MODE=nw-mwasm
+if "%1" == "nw-mwasm" set ASSEMBLER=Metrowerks
+if "%1" == "nw-mwasm"  set NO_ASM=
+if "%1" == "nw-mwasm" set ARG_PROCESSED=YES
+if "%1" == "netware-clib" set BLD_TARGET=netware-clib
+if "%1" == "netware-clib" set ARG_PROCESSED=YES
+if "%1" == "netware-libc" set BLD_TARGET=netware-libc
+if "%1" == "netware-libc" set ARG_PROCESSED=YES
+
+rem   If we didn't recognize the argument, consider it an option for config
+if "%ARG_PROCESSED%" == "NO" set CONFIG_OPTS=%CONFIG_OPTS% %1
+if "%ARG_PROCESSED%" == "YES" set ARG_PROCESSED=NO
+
+shift
+goto opts
+:endopt
+
+rem make sure a valid BLD_TARGET was specified
+if "%BLD_TARGET%" == "no_target" goto no_target
+
+rem build the nlm make file name which includes target and debug info
+set NLM_MAKE=
+if "%BLD_TARGET%" == "netware-clib" set NLM_MAKE=netware\nlm_clib
+if "%BLD_TARGET%" == "netware-libc" set NLM_MAKE=netware\nlm_libc
+if "%DEBUG%" == "" set NLM_MAKE=%NLM_MAKE%.mak
+if "%DEBUG%" == "debug" set NLM_MAKE=%NLM_MAKE%_dbg.mak
+
+if "%NO_ASM%" == "no-asm" set ASM_MODE=
+if "%NO_ASM%" == "no-asm" set ASSEMBLER=
+if "%NO_ASM%" == "no-asm" set CONFIG_OPTS=%CONFIG_OPTS% no-asm
+if "%NO_ASM%" == "no-asm" goto do_config
+
+
+rem ==================================================
+echo Generating x86 for %ASSEMBLER% assembler
+
+echo Bignum
+cd crypto\bn\asm
+perl x86.pl %ASM_MODE% > bn-nw.asm
+cd ..\..\..
+
+echo DES
+cd crypto\des\asm
+perl des-586.pl %ASM_MODE% > d-nw.asm
+cd ..\..\..
+
+echo "crypt(3)"
+
+cd crypto\des\asm
+perl crypt586.pl %ASM_MODE% > y-nw.asm
+cd ..\..\..
+
+echo Blowfish
+
+cd crypto\bf\asm
+perl bf-586.pl %ASM_MODE% > b-nw.asm
+cd ..\..\..
+
+echo CAST5
+cd crypto\cast\asm
+perl cast-586.pl %ASM_MODE% > c-nw.asm
+cd ..\..\..
+
+echo RC4
+cd crypto\rc4\asm
+perl rc4-586.pl %ASM_MODE% > r4-nw.asm
+cd ..\..\..
+
+echo MD5
+cd crypto\md5\asm
+perl md5-586.pl %ASM_MODE% > m5-nw.asm
+cd ..\..\..
+
+echo SHA1
+cd crypto\sha\asm
+perl sha1-586.pl %ASM_MODE% > s1-nw.asm
+cd ..\..\..
+
+echo RIPEMD160
+cd crypto\ripemd\asm
+perl rmd-586.pl %ASM_MODE% > rm-nw.asm
+cd ..\..\..
+
+echo RC5\32
+cd crypto\rc5\asm
+perl rc5-586.pl %ASM_MODE% > r5-nw.asm
+cd ..\..\..
+
+rem ===============================================================
+rem
+:do_config
+
+echo .
+echo configure options: %CONFIG_OPTS% %BLD_TARGET%
+echo .
+perl configure %CONFIG_OPTS% %BLD_TARGET%
+
+perl util\mkfiles.pl >MINFO
+
+echo .
+echo mk1mf.pl options: %DEBUG% %ASM_MODE% %CONFIG_OPTS% %BLD_TARGET%
+echo .
+perl util\mk1mf.pl %DEBUG% %ASM_MODE% %CONFIG_OPTS% %BLD_TARGET% >%NLM_MAKE%
+
+echo The makefile "%NLM_MAKE%" has been created use your maketool to
+echo build (ex: gmake -f %NLM_MAKE%)
+goto end
+
+rem ===============================================================
+rem
+:no_target
+echo .
+echo .  No build target specified!!!
+echo .
+echo .  usage: build [target] [debug opts] [assembly opts] [configure opts]
+echo .
+echo .     target        - "netware-clib" - CLib NetWare build
+echo .                   - "netware-libc" - LibC NKS NetWare build
+echo .
+echo .     debug opts    - "debug"  - build debug
+echo .
+echo .     assembly opts - "nw-mwasm" - use Metrowerks assembler
+echo .                     "nw-nasm"  - use NASM assembler
+echo .                     "no-asm"   - don't use assembly
+echo .
+echo .     configure opts- all unrecognized arguments are passed to the
+echo .                      perl configure script
+echo .
+echo .  If no debug or assembly opts are specified the default is to build
+echo .  non-debug without assembly
+echo .
+
+        
+:end        
--- a/Netware/cpy_tests.bat
+++ b/Netware/cpy_tests.bat
@@ -0,0 +1,112 @@
+@echo off
+
+rem   Batch file to copy OpenSSL stuff to a NetWare server for testing
+
+rem   This batch file will create an "opensssl" directory at the root of the
+rem   specified NetWare drive and copy the required files to run the tests.
+rem   It should be run from inside the "openssl\netware" subdirectory.
+
+rem   Usage:
+rem      cpy_tests.bat <test subdirectory> <NetWare drive>
+rem          <test subdirectory> - out_nw.dbg | out_nw
+rem          <NetWare drive> - any mapped drive letter
+rem
+rem      example ( copy from debug build to m: dirve ):
+rem              cpy_tests.bat out_nw.dbg m:
+rem
+rem      CAUTION:  If a directory named OpenSSL exists on the target drive
+rem                it will be deleted first.
+
+
+if "%1" == "" goto usage
+if "%2" == "" goto usage
+
+rem   Assume running in \openssl directory unless cpy_tests.bat exists then
+rem   it must be the \openssl\netware directory
+set loc=.
+if exist cpy_tests.bat set loc=..
+
+rem   make sure the local build subdirectory specified is valid
+if not exist %loc%\%1\NUL goto invalid_dir
+
+rem   make sure target drive is valid
+if not exist %2\NUL goto invalid_drive
+
+rem   If an OpenSSL directory exists on the target drive, remove it
+if exist %2\openssl\NUL goto remove_openssl
+goto do_copy
+
+:remove_openssl
+echo .
+echo OpenSSL directory exists on %2 - it will be removed!
+pause
+rmdir %2\openssl /s /q
+
+:do_copy
+rem   make an "openssl" directory and others at the root of the NetWare drive
+mkdir %2\openssl
+mkdir %2\openssl\test_out
+mkdir %2\openssl\apps
+mkdir %2\openssl\certs
+mkdir %2\openssl\test
+
+
+rem   copy the test nlms
+copy %loc%\%1\*.nlm %2\openssl\
+
+rem   copy the test perl script
+copy %loc%\netware\do_tests.pl %2\openssl\
+
+rem   copy the certs directory stuff
+xcopy %loc%\certs\*.*         %2\openssl\certs\ /s
+
+rem   copy the test directory stuff
+copy %loc%\test\CAss.cnf      %2\openssl\test\
+copy %loc%\test\Uss.cnf       %2\openssl\test\
+copy %loc%\test\pkcs7.pem     %2\openssl\test\
+copy %loc%\test\pkcs7-1.pem   %2\openssl\test\
+copy %loc%\test\testcrl.pem   %2\openssl\test\
+copy %loc%\test\testp7.pem    %2\openssl\test\
+copy %loc%\test\testreq2.pem  %2\openssl\test\
+copy %loc%\test\testrsa.pem   %2\openssl\test\
+copy %loc%\test\testsid.pem   %2\openssl\test\
+copy %loc%\test\testx509.pem  %2\openssl\test\
+copy %loc%\test\v3-cert1.pem  %2\openssl\test\
+copy %loc%\test\v3-cert2.pem  %2\openssl\test\
+
+rem   copy the apps directory stuff
+copy %loc%\apps\client.pem    %2\openssl\apps\
+copy %loc%\apps\server.pem    %2\openssl\apps\
+copy %loc%\apps\openssl.cnf   %2\openssl\apps\
+
+echo .
+echo Tests copied
+echo Run the test script at the console by typing:
+echo     "Perl \openssl\do_tests.pl"
+echo .
+echo Make sure the Search path includes the OpenSSL subdirectory
+
+goto end
+
+:invalid_dir
+echo.
+echo Invalid build directory specified: %1
+echo.
+goto usage
+
+:invalid_drive
+echo.
+echo Invalid drive: %2
+echo.
+goto usage
+
+:usage
+echo.
+echo usage: cpy_tests.bat [test subdirectory] [NetWare drive]
+echo     [test subdirectory] - out_nw_clib.dbg, out_nw_libc.dbg, etc. 
+echo     [NetWare drive]     - any mapped drive letter
+echo.
+echo example: cpy_test out_nw_clib.dbg M:
+echo  (copy from clib debug build area to M: drive)
+
+:end
--- a/Netware/do_tests.pl
+++ b/Netware/do_tests.pl
@@ -0,0 +1,585 @@
+# perl script to run OpenSSL tests
+
+
+my $base_path      = "\\openssl";
+
+my $output_path    = "$base_path\\test_out";
+my $cert_path      = "$base_path\\certs";
+my $test_path      = "$base_path\\test";
+my $app_path       = "$base_path\\apps";
+
+my $tmp_cert       = "$output_path\\cert.tmp";
+my $OpenSSL_config = "$app_path\\openssl.cnf";
+my $log_file       = "$output_path\\tests.log";
+
+my $pause = 0;
+
+
+#  process the command line args to see if they wanted us to pause
+#  between executing each command
+foreach $i (@ARGV)
+{
+   if ($i =~ /^-p$/)
+   { $pause=1; }
+}
+
+
+
+main();
+
+
+############################################################################
+sub main()
+{
+   # delete all the output files in the output directory
+   unlink <$output_path\\*.*>;
+
+   # open the main log file 
+   open(OUT, ">$log_file") || die "unable to open $log_file\n";
+
+   
+   algorithm_tests();
+   encryption_tests();
+   pem_tests();
+   verify_tests();
+   ssl_tests();
+   ca_tests();
+
+   close(OUT);
+
+   print("\nCompleted running tests.\n\n");
+   print("Check log file for errors: $log_file\n");
+}
+
+############################################################################
+sub algorithm_tests
+{
+   my $i;
+   my $outFile;
+   my @tests = ( rsa_test, destest, ideatest, bftest, shatest, sha1test,
+                 md5test, dsatest, md2test, mdc2test, rc2test, rc4test, randtest,
+                 dhtest, exptest );
+
+   print( "\nRUNNING CRYPTO ALGORITHM TESTS:\n\n");
+
+   print( OUT "\n========================================================\n");
+   print( OUT "CRYPTO ALGORITHM TESTS:\n\n");
+
+   foreach $i (@tests)
+   {
+      $outFile = "$output_path\\$i.out";
+      system("$i > $outFile");
+      log_desc("Test: $i\.nlm:");
+      log_output("", $outFile );
+   }
+}
+
+############################################################################
+sub encryption_tests
+{
+   my $i;
+   my $outFile;
+   my @enc_tests = ( "enc", "rc4", "des-cfb", "des-ede-cfb", "des-ede3-cfb",
+                     "des-ofb", "des-ede-ofb", "des-ede3-ofb",
+                     "des-ecb", "des-ede", "des-ede3", "des-cbc",
+                     "des-ede-cbc", "des-ede3-cbc", "idea-ecb", "idea-cfb",
+                     "idea-ofb", "idea-cbc", "rc2-ecb", "rc2-cfb",
+                     "rc2-ofb", "rc2-cbc", "bf-ecb", "bf-cfb",
+                     "bf-ofb", "bf-cbc" );
+
+   my $input = "$base_path\\do_tests.pl";
+   my $cipher = "$output_path\\cipher.out";
+   my $clear = "$output_path\\clear.out";
+
+   print( "\nRUNNING ENCRYPTION & DECRYPTION TESTS:\n\n");
+
+   print( OUT "\n========================================================\n");
+   print( OUT "FILE ENCRYPTION & DECRYPTION TESTS:\n\n");
+
+   foreach $i (@enc_tests)
+   {
+      log_desc("Testing: $i");
+
+      # do encryption
+      $outFile = "$output_path\\enc.out";
+      system("openssl2 $i -e -bufsize 113 -k test -in $input -out $cipher > $outFile" );
+      log_output("Encrypting: $input --> $cipher", $outFile);
+
+      # do decryption
+      $outFile = "$output_path\\dec.out";
+      system("openssl2 $i -d -bufsize 157 -k test -in $cipher -out $clear > $outFile");
+      log_output("Decrypting: $cipher --> $clear", $outFile);
+
+      # compare files
+      $x = compare_files( $input, $clear, 1);
+      if ( $x == 0 )
+      {
+         print( "SUCCESS - files match: $input, $clear\n");
+         print( OUT "SUCCESS - files match: $input, $clear\n");
+      }
+      else
+      {
+         print( "ERROR: files don't match\n");
+         print( OUT "ERROR: files don't match\n");
+      }
+
+      do_wait();
+
+      # Now do the same encryption but use Base64
+
+      # do encryption B64
+      $outFile = "$output_path\\B64enc.out";
+      system("openssl2 $i -a -e -bufsize 113 -k test -in $input -out $cipher > $outFile");
+      log_output("Encrypting(B64): $cipher --> $clear", $outFile);
+
+      # do decryption B64
+      $outFile = "$output_path\\B64dec.out";
+      system("openssl2 $i -a -d -bufsize 157 -k test -in $cipher -out $clear > $outFile");
+      log_output("Decrypting(B64): $cipher --> $clear", $outFile);
+
+      # compare files
+      $x = compare_files( $input, $clear, 1);
+      if ( $x == 0 )
+      {
+         print( "SUCCESS - files match: $input, $clear\n");
+         print( OUT "SUCCESS - files match: $input, $clear\n");
+      }
+      else
+      {
+         print( "ERROR: files don't match\n");
+         print( OUT "ERROR: files don't match\n");
+      }
+
+      do_wait();
+
+   } # end foreach
+
+   # delete the temporary files
+   unlink($cipher);
+   unlink($clear);
+}
+
+
+############################################################################
+sub pem_tests
+{
+   my $i;
+   my $tmp_out;
+   my $outFile = "$output_path\\pem.out";
+
+   my %pem_tests = (
+         "crl"      => "testcrl.pem",
+          "pkcs7"   => "testp7.pem",
+          "req"     => "testreq2.pem",
+          "rsa"     => "testrsa.pem",
+          "x509"    => "testx509.pem",
+          "x509"    => "v3-cert1.pem",
+          "sess_id" => "testsid.pem"  );
+
+
+   print( "\nRUNNING PEM TESTS:\n\n");
+
+   print( OUT "\n========================================================\n");
+   print( OUT "PEM TESTS:\n\n");
+
+   foreach $i (keys(%pem_tests))
+   {
+      log_desc( "Testing: $i");
+
+      my $input = "$test_path\\$pem_tests{$i}";
+
+      $tmp_out = "$output_path\\$pem_tests{$i}";
+
+      if ($i ne "req" )
+      {
+         system("openssl2 $i -in $input -out $tmp_out > $outFile");
+         log_output( "openssl2 $i -in $input -out $tmp_out", $outFile);
+      }
+      else
+      {
+         system("openssl2 $i -in $input -out $tmp_out -config $OpenSSL_config > $outFile");
+         log_output( "openssl2 $i -in $input -out $tmp_out -config $OpenSSL_config", $outFile );
+      }
+
+      $x = compare_files( $input, $tmp_out);
+      if ( $x == 0 )
+      {
+         print( "SUCCESS - files match: $input, $tmp_out\n");
+         print( OUT "SUCCESS - files match: $input, $tmp_out\n");
+      }
+      else
+      {
+         print( "ERROR: files don't match\n");
+         print( OUT "ERROR: files don't match\n");
+      }
+      do_wait();
+
+   } # end foreach
+}
+
+
+############################################################################
+sub verify_tests
+{
+   my $i;
+   my $outFile = "$output_path\\verify.out";
+
+   my @cert_files = <$cert_path\\*.pem>;
+
+   print( "\nRUNNING VERIFY TESTS:\n\n");
+
+   print( OUT "\n========================================================\n");
+   print( OUT "VERIFY TESTS:\n\n");
+
+   make_tmp_cert_file();
+
+   foreach $i (@cert_files)
+   {
+      system("openssl2 verify -CAfile $tmp_cert $i >$outFile");
+      log_desc("Verifying cert: $i");
+      log_output("openssl2 verify -CAfile $tmp_cert $i", $outFile);
+   }
+}
+
+
+############################################################################
+sub ssl_tests
+{
+   my $outFile = "$output_path\\ssl_tst.out";
+
+   print( "\nRUNNING SSL TESTS:\n\n");
+
+   print( OUT "\n========================================================\n");
+   print( OUT "SSL TESTS:\n\n");
+
+   make_tmp_cert_file();
+
+   system("ssltest -ssl2 >$outFile");
+   log_desc("Testing sslv2:");
+   log_output("ssltest -ssl2", $outFile);
+
+   system("ssltest -ssl2 -server_auth -CAfile $tmp_cert >$outFile");
+   log_desc("Testing sslv2 with server authentication:");
+   log_output("ssltest -ssl2 -server_auth -CAfile $tmp_cert", $outFile);
+
+   system("ssltest -ssl2 -client_auth -CAfile $tmp_cert >$outFile");
+   log_desc("Testing sslv2 with client authentication:");
+   log_output("ssltest -ssl2 -client_auth -CAfile $tmp_cert", $outFile);
+
+   system("ssltest -ssl2 -server_auth -client_auth -CAfile $tmp_cert >$outFile");
+   log_desc("Testing sslv2 with both client and server authentication:");
+   log_output("ssltest -ssl2 -server_auth -client_auth -CAfile $tmp_cert", $outFile);
+
+   system("ssltest -ssl3 >$outFile");
+   log_desc("Testing sslv3:");
+   log_output("ssltest -ssl3", $outFile);
+
+   system("ssltest -ssl3 -server_auth -CAfile $tmp_cert >$outFile");
+   log_desc("Testing sslv3 with server authentication:");
+   log_output("ssltest -ssl3 -server_auth -CAfile $tmp_cert", $outFile);
+
+   system("ssltest -ssl3 -client_auth -CAfile $tmp_cert >$outFile");
+   log_desc("Testing sslv3 with client authentication:");
+   log_output("ssltest -ssl3 -client_auth -CAfile $tmp_cert", $outFile);
+
+   system("ssltest -ssl3 -server_auth -client_auth -CAfile $tmp_cert >$outFile");
+   log_desc("Testing sslv3 with both client and server authentication:");
+   log_output("ssltest -ssl3 -server_auth -client_auth -CAfile $tmp_cert", $outFile);
+
+   system("ssltest >$outFile");
+   log_desc("Testing sslv2/sslv3:");
+   log_output("ssltest", $outFile);
+
+   system("ssltest -server_auth -CAfile $tmp_cert >$outFile");
+   log_desc("Testing sslv2/sslv3 with server authentication:");
+   log_output("ssltest -server_auth -CAfile $tmp_cert", $outFile);
+
+   system("ssltest -client_auth -CAfile $tmp_cert >$outFile");
+   log_desc("Testing sslv2/sslv3 with client authentication:");
+   log_output("ssltest -client_auth -CAfile $tmp_cert", $outFile);
+
+   system("ssltest -server_auth -client_auth -CAfile $tmp_cert >$outFile");
+   log_desc("Testing sslv2/sslv3 with both client and server authentication:");
+   log_output("ssltest -server_auth -client_auth -CAfile $tmp_cert", $outFile);
+
+   system("ssltest -bio_pair -ssl2 >$outFile");
+   log_desc("Testing sslv2 via BIO pair:");
+   log_output("ssltest -bio_pair -ssl2", $outFile);
+
+   system("ssltest -bio_pair -dhe1024dsa -v >$outFile");
+   log_desc("Testing sslv2/sslv3 with 1024 bit DHE via BIO pair:");
+   log_output("ssltest -bio_pair -dhe1024dsa -v", $outFile);
+
+   system("ssltest -bio_pair -ssl2 -server_auth -CAfile $tmp_cert >$outFile");
+   log_desc("Testing sslv2 with server authentication via BIO pair:");
+   log_output("ssltest -bio_pair -ssl2 -server_auth -CAfile $tmp_cert", $outFile);
+
+   system("ssltest -bio_pair -ssl2 -client_auth -CAfile $tmp_cert >$outFile");
+   log_desc("Testing sslv2 with client authentication via BIO pair:");
+   log_output("ssltest -bio_pair -ssl2 -client_auth -CAfile $tmp_cert", $outFile);
+
+   system("ssltest -bio_pair -ssl2 -server_auth -client_auth -CAfile $tmp_cert >$outFile");
+   log_desc("Testing sslv2 with both client and server authentication via BIO pair:");
+   log_output("ssltest -bio_pair -ssl2 -server_auth -client_auth -CAfile $tmp_cert", $outFile);
+
+   system("ssltest -bio_pair -ssl3 >$outFile");
+   log_desc("Testing sslv3 via BIO pair:");
+   log_output("ssltest -bio_pair -ssl3", $outFile);
+
+   system("ssltest -bio_pair -ssl3 -server_auth -CAfile $tmp_cert >$outFile");
+   log_desc("Testing sslv3 with server authentication via BIO pair:");
+   log_output("ssltest -bio_pair -ssl3 -server_auth -CAfile $tmp_cert", $outFile);
+
+   system("ssltest -bio_pair -ssl3 -client_auth -CAfile $tmp_cert >$outFile");
+   log_desc("Testing sslv3 with client authentication  via BIO pair:");
+   log_output("ssltest -bio_pair -ssl3 -client_auth -CAfile $tmp_cert", $outFile);
+
+   system("ssltest -bio_pair -ssl3 -server_auth -client_auth -CAfile $tmp_cert >$outFile");
+   log_desc("Testing sslv3 with both client and server authentication via BIO pair:");
+   log_output("ssltest -bio_pair -ssl3 -server_auth -client_auth -CAfile $tmp_cert", $outFile);
+
+   system("ssltest -bio_pair >$outFile");
+   log_desc("Testing sslv2/sslv3 via BIO pair:");
+   log_output("ssltest -bio_pair", $outFile);
+
+   system("ssltest -bio_pair -server_auth -CAfile $tmp_cert >$outFile");
+   log_desc("Testing sslv2/sslv3 with server authentication via BIO pair:");
+   log_output("ssltest -bio_pair -server_auth -CAfile $tmp_cert", $outFile);
+
+   system("ssltest -bio_pair -client_auth -CAfile $tmp_cert >$outFile");
+   log_desc("Testing sslv2/sslv3 with client authentication via BIO pair:");
+   log_output("ssltest -bio_pair -client_auth -CAfile $tmp_cert", $outFile);
+
+   system("ssltest -bio_pair -server_auth -client_auth -CAfile $tmp_cert >$outFile");
+   log_desc("Testing sslv2/sslv3 with both client and server authentication via BIO pair:");
+   log_output("ssltest -bio_pair -server_auth -client_auth -CAfile $tmp_cert", $outFile);
+}
+
+
+############################################################################
+sub ca_tests
+{
+   my $outFile = "$output_path\\ca_tst.out";
+
+   my($CAkey)     = "$output_path\\keyCA.ss";
+   my($CAcert)    = "$output_path\\certCA.ss";
+   my($CAserial)  = "$output_path\\certCA.srl";
+   my($CAreq)     = "$output_path\\reqCA.ss";
+   my($CAreq2)    = "$output_path\\req2CA.ss";
+
+   my($CAconf)    = "$test_path\\CAss.cnf";
+
+   my($Uconf)     = "$test_path\\Uss.cnf";
+
+   my($Ukey)      = "$output_path\\keyU.ss";
+   my($Ureq)      = "$output_path\\reqU.ss";
+   my($Ucert)     = "$output_path\\certU.ss";
+
+   print( "\nRUNNING CA TESTS:\n\n");
+
+   print( OUT "\n========================================================\n");
+   print( OUT "CA TESTS:\n");
+
+   system("openssl2 req -config $CAconf -out $CAreq -keyout $CAkey -new >$outFile");
+   log_desc("Make a certificate request using req:");
+   log_output("openssl2 req -config $CAconf -out $CAreq -keyout $CAkey -new", $outFile);
+
+   system("openssl2 x509 -CAcreateserial -in $CAreq -days 30 -req -out $CAcert -signkey $CAkey >$outFile");
+   log_desc("Convert the certificate request into a self signed certificate using x509:");
+   log_output("openssl2 x509 -CAcreateserial -in $CAreq -days 30 -req -out $CAcert -signkey $CAkey", $outFile);
+
+   system("openssl2 x509 -in $CAcert -x509toreq -signkey $CAkey -out $CAreq2 >$outFile");
+   log_desc("Convert a certificate into a certificate request using 'x509':");
+   log_output("openssl2 x509 -in $CAcert -x509toreq -signkey $CAkey -out $CAreq2", $outFile);
+
+   system("openssl2 req -config $OpenSSL_config -verify -in $CAreq -noout >$outFile");
+   log_output("openssl2 req -config $OpenSSL_config -verify -in $CAreq -noout", $outFile);
+
+   system("openssl2 req -config $OpenSSL_config -verify -in $CAreq2 -noout >$outFile");
+   log_output( "openssl2 req -config $OpenSSL_config -verify -in $CAreq2 -noout", $outFile);
+
+   system("openssl2 verify -CAfile $CAcert $CAcert >$outFile");
+   log_output("openssl2 verify -CAfile $CAcert $CAcert", $outFile);
+
+   system("openssl2 req -config $Uconf -out $Ureq -keyout $Ukey -new >$outFile");
+   log_desc("Make another certificate request using req:");
+   log_output("openssl2 req -config $Uconf -out $Ureq -keyout $Ukey -new", $outFile);
+
+   system("openssl2 x509 -CAcreateserial -in $Ureq -days 30 -req -out $Ucert -CA $CAcert -CAkey $CAkey -CAserial $CAserial >$outFile");
+   log_desc("Sign certificate request with the just created CA via x509:");
+   log_output("openssl2 x509 -CAcreateserial -in $Ureq -days 30 -req -out $Ucert -CA $CAcert -CAkey $CAkey -CAserial $CAserial", $outFile);
+
+   system("openssl2 verify -CAfile $CAcert $Ucert >$outFile");
+   log_output("openssl2 verify -CAfile $CAcert $Ucert", $outFile);
+
+   system("openssl2 x509 -subject -issuer -startdate -enddate -noout -in $Ucert >$outFile");
+   log_desc("Certificate details");
+   log_output("openssl2 x509 -subject -issuer -startdate -enddate -noout -in $Ucert", $outFile);
+
+   print(OUT "-- \n");
+   print(OUT "The generated CA certificate is $CAcert\n");
+   print(OUT "The generated CA private key is $CAkey\n");
+   print(OUT "The current CA signing serial number is in $CAserial\n");
+
+   print(OUT "The generated user certificate is $Ucert\n");
+   print(OUT "The generated user private key is $Ukey\n");
+   print(OUT "--\n");
+}
+
+############################################################################
+sub log_output( $ $ )
+{
+   my( $desc, $file ) = @_;
+   my($error) = 0;
+   my($key);
+   my($msg);
+
+   if ($desc)
+   {
+      print("$desc\n");
+      print(OUT "$desc\n");
+   }
+
+      # loop waiting for test program to complete
+   while ( stat($file) == 0)
+      { print(". "); sleep(1); }
+
+
+      # copy test output to log file
+   open(IN, "<$file");
+   while (<IN>)
+   { 
+      print(OUT $_); 
+      if ( $_ =~ /ERROR/ )
+      {
+         $error = 1;
+      }
+   }
+      # close and delete the temporary test output file
+   close(IN);
+   unlink($file);
+
+   if ( $error == 0 )
+   {
+      $msg = "Test Succeeded";
+   }
+   else
+   {
+      $msg = "Test Failed";
+   }
+
+   print(OUT "$msg\n");
+
+   if ($pause)
+   {
+      print("$msg - press ENTER to continue...");
+      $key = getc;
+      print("\n");
+   }
+      
+      # Several of the testing scripts run a loop loading the 
+      # same NLM with different options.
+      # On slow NetWare machines there appears to be some delay in the 
+      # OS actually unloading the test nlms and the OS complains about.
+      # the NLM already being loaded.  This additional pause is to 
+      # to help provide a little more time for unloading before trying to 
+      # load again.
+   sleep(1);
+}
+
+
+############################################################################
+sub log_desc( $ )
+{
+   my( $desc ) = @_;
+
+   print("\n");
+   print("$desc\n");
+
+   print(OUT "\n");
+   print(OUT "$desc\n");
+   print(OUT "======================================\n");
+}
+
+############################################################################
+sub compare_files( $ $ $ )
+{
+   my( $file1, $file2, $binary ) = @_;
+   my( $n1, $n2, $b1, $b2 );
+   my($ret) = 1;
+
+   open(IN0, $file1) || die "\nunable to open $file1\n";
+   open(IN1, $file2) || die "\nunable to open $file2\n";
+
+  if ($binary)
+  {
+      binmode IN0;
+      binmode IN1;
+  }
+
+   for (;;)
+   {
+      $n1 = read(IN0, $b1, 512);
+      $n2 = read(IN1, $b2, 512);
+
+      if ($n1 != $n2) {last;}
+      if ($b1 != $b2) {last;}
+
+      if ($n1 == 0)
+      {
+         $ret = 0;
+         last;
+      }
+   }
+   close(IN0);
+   close(IN1);
+   return($ret);
+}
+
+############################################################################
+sub do_wait()
+{
+   my($key);
+
+   if ($pause)
+   {
+      print("Press ENTER to continue...");
+      $key = getc;
+      print("\n");
+   }
+}
+
+
+############################################################################
+sub make_tmp_cert_file()
+{
+   my @cert_files = <$cert_path\\*.pem>;
+
+      # delete the file if it already exists
+   unlink($tmp_cert);
+
+   open( TMP_CERT, ">$tmp_cert") || die "\nunable to open $tmp_cert\n";
+
+   print("building temporary cert file\n");
+   
+   # create a temporary cert file that contains all the certs
+   foreach $i (@cert_files)
+   {
+      open( IN_CERT, $i ) || die "\nunable to open $i\n";
+
+      for(;;)
+      {
+         $n = sysread(IN_CERT, $data, 1024);
+
+         if ($n == 0)
+         {
+            close(IN_CERT);
+            last;
+         };
+
+         syswrite(TMP_CERT, $data, $n);
+      }
+   }
+
+   close( TMP_CERT );
+}
--- a/Netware/globals.txt
+++ b/Netware/globals.txt
@@ -0,0 +1,254 @@
+An initial review of the OpenSSL code was done to determine how many 
+global variables where present.  The idea was to determine the amount of 
+work required to pull the globals into an instance data structure in 
+order to build a Library NLM for NetWare.  This file contains the results 
+of the review.  Each file is listed along with the globals in the file.  
+The initial review was done very quickly so this list is probably
+not a comprehensive list.
+
+
+cryptlib.c
+===========================================
+
+static STACK *app_locks=NULL;
+
+static STACK_OF(CRYPTO_dynlock) *dyn_locks=NULL;
+
+static void (MS_FAR *locking_callback)(int mode,int type,
+   const char *file,int line)=NULL;
+static int (MS_FAR *add_lock_callback)(int *pointer,int amount,
+   int type,const char *file,int line)=NULL;
+static unsigned long (MS_FAR *id_callback)(void)=NULL;
+static struct CRYPTO_dynlock_value *(MS_FAR *dynlock_create_callback)
+   (const char *file,int line)=NULL;
+static void (MS_FAR *dynlock_lock_callback)(int mode,
+   struct CRYPTO_dynlock_value *l, const char *file,int line)=NULL;
+static void (MS_FAR *dynlock_destroy_callback)(struct CRYPTO_dynlock_value *l,
+   const char *file,int line)=NULL;
+
+
+mem.c
+===========================================
+static int allow_customize = 1;      /* we provide flexible functions for */
+static int allow_customize_debug = 1;/* exchanging memory-related functions at
+
+/* may be changed as long as `allow_customize' is set */
+static void *(*malloc_locked_func)(size_t)  = malloc;
+static void (*free_locked_func)(void *)     = free;
+static void *(*malloc_func)(size_t)         = malloc;
+static void *(*realloc_func)(void *, size_t)= realloc;
+static void (*free_func)(void *)            = free;
+
+/* use default functions from mem_dbg.c */
+static void (*malloc_debug_func)(void *,int,const char *,int,int)
+   = CRYPTO_dbg_malloc;
+static void (*realloc_debug_func)(void *,void *,int,const char *,int,int)
+   = CRYPTO_dbg_realloc;
+static void (*free_debug_func)(void *,int) = CRYPTO_dbg_free;
+static void (*set_debug_options_func)(long) = CRYPTO_dbg_set_options;
+static long (*get_debug_options_func)(void) = CRYPTO_dbg_get_options;
+
+
+mem_dbg.c
+===========================================
+static int mh_mode=CRYPTO_MEM_CHECK_OFF;
+static unsigned long order = 0; /* number of memory requests */
+static LHASH *mh=NULL; /* hash-table of memory requests (address as key) */
+
+static LHASH *amih=NULL; /* hash-table with those app_mem_info_st's */
+static long options =             /* extra information to be recorded */
+static unsigned long disabling_thread = 0;
+
+
+err.c
+===========================================
+static LHASH *error_hash=NULL;
+static LHASH *thread_hash=NULL;
+
+several files have routines with static "init" to track if error strings
+   have been loaded ( may not want seperate error strings for each process )
+   The "init" variable can't be left "global" because the error has is a ptr
+   that is malloc'ed.  The malloc'ed error has is dependant on the "init"
+   vars.
+
+   files:
+      pem_err.c
+      cpt_err.c
+      pk12err.c
+      asn1_err.c
+      bio_err.c
+      bn_err.c
+      buf_err.c
+      comp_err.c
+      conf_err.c
+      cpt_err.c
+      dh_err.c
+      dsa_err.c
+      dso_err.c
+      evp_err.c
+      obj_err.c
+      pkcs7err.c
+      rand_err.c
+      rsa_err.c
+      rsar_err.c
+      ssl_err.c
+      x509_err.c
+      v3err.c
+		err.c
+
+These file have similar "init" globals but they are for other stuff not
+error strings:
+
+		bn_lib.c
+		ecc_enc.c
+		s23_clnt.c
+		s23_meth.c
+		s23_srvr.c
+		s2_clnt.c
+		s2_lib.c
+		s2_meth.c
+		s2_srvr.c
+		s3_clnt.c
+		s3_lib.c
+		s3_srvr.c
+		t1_clnt.c
+		t1_meth.c
+		t1_srvr.c
+
+rand_lib.c
+===========================================
+static RAND_METHOD *rand_meth= &rand_ssleay_meth;
+
+md_rand.c
+===========================================
+static int state_num=0,state_index=0;
+static unsigned char state[STATE_SIZE+MD_DIGEST_LENGTH];
+static unsigned char md[MD_DIGEST_LENGTH];
+static long md_count[2]={0,0};
+static double entropy=0;
+static int initialized=0;
+
+/* This should be set to 1 only when ssleay_rand_add() is called inside
+   an already locked state, so it doesn't try to lock and thereby cause
+   a hang.  And it should always be reset back to 0 before unlocking. */
+static int add_do_not_lock=0;
+
+obj_dat.c
+============================================
+static int new_nid=NUM_NID;
+static LHASH *added=NULL;
+
+b_sock.c
+===========================================
+static unsigned long BIO_ghbn_hits=0L;
+static unsigned long BIO_ghbn_miss=0L;
+static struct ghbn_cache_st
+   {
+   char name[129];
+   struct hostent *ent;
+   unsigned long order;
+   } ghbn_cache[GHBN_NUM];
+
+static int wsa_init_done=0;
+
+
+bio_lib.c
+===========================================
+static STACK_OF(CRYPTO_EX_DATA_FUNCS) *bio_meth=NULL;
+static int bio_meth_num=0;
+
+
+bn_lib.c
+========================================
+static int bn_limit_bits=0;
+static int bn_limit_num=8;        /* (1<<bn_limit_bits) */
+static int bn_limit_bits_low=0;
+static int bn_limit_num_low=8;    /* (1<<bn_limit_bits_low) */
+static int bn_limit_bits_high=0;
+static int bn_limit_num_high=8;   /* (1<<bn_limit_bits_high) */
+static int bn_limit_bits_mont=0;
+static int bn_limit_num_mont=8;   /* (1<<bn_limit_bits_mont) */
+
+conf_lib.c
+========================================
+static CONF_METHOD *default_CONF_method=NULL;
+
+dh_lib.c
+========================================
+static DH_METHOD *default_DH_method;
+static int dh_meth_num = 0;
+static STACK_OF(CRYPTO_EX_DATA_FUNCS) *dh_meth = NULL;
+
+dsa_lib.c
+========================================
+static DSA_METHOD *default_DSA_method;
+static int dsa_meth_num = 0;
+static STACK_OF(CRYPTO_EX_DATA_FUNCS) *dsa_meth = NULL;
+
+dso_lib.c
+========================================
+static DSO_METHOD *default_DSO_meth = NULL;
+
+rsa_lib.c
+========================================
+static RSA_METHOD *default_RSA_meth=NULL;
+static int rsa_meth_num=0;
+static STACK_OF(CRYPTO_EX_DATA_FUNCS) *rsa_meth=NULL;
+
+x509_trs.c
+=======================================
+static int (*default_trust)(int id, X509 *x, int flags) = obj_trust;
+static STACK_OF(X509_TRUST) *trtable = NULL;
+
+x509_req.c
+=======================================
+static int *ext_nids = ext_nid_list;
+
+o_names.c
+======================================
+static LHASH *names_lh=NULL;
+static STACK_OF(NAME_FUNCS) *name_funcs_stack;
+static int free_type;
+static int names_type_num=OBJ_NAME_TYPE_NUM;
+
+
+th-lock.c - NEED to add support for locking for NetWare
+==============================================
+static long *lock_count;
+(other platform specific globals)
+
+x_x509.c
+==============================================
+static int x509_meth_num = 0;
+static STACK_OF(CRYPTO_EX_DATA_FUNCS) *x509_meth = NULL;
+
+
+evp_pbe.c
+============================================
+static STACK *pbe_algs;
+
+evp_key.c
+============================================
+static char prompt_string[80];
+
+ssl_ciph.c
+============================================
+static STACK_OF(SSL_COMP) *ssl_comp_methods=NULL;
+
+ssl_lib.c
+=============================================
+static STACK_OF(CRYPTO_EX_DATA_FUNCS) *ssl_meth=NULL;
+static STACK_OF(CRYPTO_EX_DATA_FUNCS) *ssl_ctx_meth=NULL;
+static int ssl_meth_num=0;
+static int ssl_ctx_meth_num=0;
+
+ssl_sess.c
+=============================================
+static int ssl_session_num=0;
+static STACK_OF(CRYPTO_EX_DATA_FUNCS) *ssl_session_meth=NULL;
+
+x509_vfy.c
+============================================
+static STACK_OF(CRYPTO_EX_DATA_FUNCS) *x509_store_ctx_method=NULL;
+static int x509_store_ctx_num=0;
+
--- a/Netware/readme.txt
+++ b/Netware/readme.txt
@@ -0,0 +1,19 @@
+
+Contents of the openssl\netware directory
+==========================================
+
+Regular files:
+
+readme.txt     - this file
+do_tests.pl    - perl script used to run the OpenSSL tests on NetWare
+cpy_tests.bat  - batch to to copy test stuff to NetWare server
+build.bat      - batch file to help with builds
+set_env.bat    - batch file to help setup build environments
+globals.txt    - results of initial code review to identify OpenSSL global variables
+
+
+The following files are generated by the various scripts.  They are
+recreated each time and it is okay to delete them.
+
+*.def - command files used by Metrowerks linker
+*.mak - make files generated by mk1mf.pl
--- a/Netware/set_env.bat
+++ b/Netware/set_env.bat
@@ -0,0 +1,90 @@
+@echo off
+
+rem ========================================================================
+rem   Batch file to assist in setting up the necessary enviroment for
+rem   building OpenSSL for NetWare.
+rem
+rem   usage:
+rem      set_env [target]
+rem
+rem      target      - "netware-clib" - Clib build
+rem                  - "netware-libc" - LibC build
+rem
+rem
+
+if "a%1" == "a" goto usage
+               
+set LIBC_BUILD=
+set CLIB_BUILD=
+
+if "%1" == "netware-clib" set CLIB_BUILD=Y
+if "%1" == "netware-clib" set LIBC_BUILD=
+
+if "%1" == "netware-libc"  set LIBC_BUILD=Y
+if "%1" == "netware-libc"  set CLIB_BUILD=
+
+rem   Location of tools (compiler, linker, etc)
+set TOOLS=d:\i_drive\tools
+
+rem   If Perl for Win32 is not already in your path, add it here
+set PERL_PATH=
+
+rem   Define path to the Metrowerks command line tools
+rem   ( compiler, assembler, linker)
+set METROWERKS_PATH=%TOOLS%\codewar\pdk_21\tools\command line tools
+rem set METROWERKS_PATH=%TOOLS%\codewar\PDK_40\Other Metrowerks Tools\Command Line Tools
+
+rem   If using gnu make define path to utility
+set GNU_MAKE_PATH=%TOOLS%\gnu
+
+rem   If using ms nmake define path to nmake
+set MS_NMAKE_PATH=%TOOLS%\msvc\600\bin
+
+rem   If using NASM assembler define path
+set NASM_PATH=%TOOLS%\nasm
+
+rem   Update path to include tool paths
+set path=%path%;%METROWERKS_PATH%
+if not "%GNU_MAKE_PATH%" == "" set path=%path%;%GNU_MAKE_PATH%
+if not "%MS_NMAKE_PATH%" == "" set path=%path%;%MS_NMAKE_PATH%
+if not "%NASM_PATH%"     == "" set path=%path%;%NASM_PATH%
+if not "%PERL_PATH%"     == "" set path=%path%;%PERL_PATH%
+
+rem   Set MWCIncludes to location of Novell NDK includes
+if "%LIBC_BUILD%" == "Y" set MWCIncludes=%TOOLS%\ndk\libc\include;%TOOLS%\ndk\libc\include\winsock;.\engines
+if "%CLIB_BUILD%" == "Y" set MWCIncludes=%TOOLS%\ndk\nwsdk\include\nlm;.\engines
+set include=
+
+rem   Set Imports to location of Novell NDK import files
+if "%LIBC_BUILD%" == "Y" set IMPORTS=%TOOLS%\ndk\libc\imports
+if "%CLIB_BUILD%" == "Y" set IMPORTS=%TOOLS%\ndk\nwsdk\imports
+
+rem   Set PRELUDE to the absolute path of the prelude object to link with in
+rem   the Metrowerks NetWare PDK - NOTE: for Clib builds "nwpre.obj" is 
+rem   recommended, for LibC NKS builds libcpre.o must be used
+if "%LIBC_BUILD%" == "Y" set PRELUDE=%TOOLS%\ndk\libc\imports\libcpre.o
+if "%CLIB_BUILD%" == "Y" set PRELUDE=%TOOLS%\codewar\pdk_21\novell support\metrowerks support\libraries\runtime\nwpre.obj
+
+
+if "%LIBC_BUILD%" == "Y" echo Enviroment configured for LibC build
+if "%LIBC_BUILD%" == "Y" echo use "netware\build.bat netware-libc ..." 
+
+if "%CLIB_BUILD%" == "Y" echo Enviroment configured for CLib build
+if "%CLIB_BUILD%" == "Y" echo use "netware\build.bat netware-clib ..." 
+goto end
+
+:usage
+rem ===============================================================
+echo .
+echo . No target build specified!
+echo .
+echo . usage: set_env [target]
+echo .
+echo .   target      - "netware-clib" - Clib build
+echo .               - "netware-libc" - LibC build
+echo .
+
+
+
+:end
+
--- a/83
+++ b/83
@@ -46,3 +46,86 @@ scripts use the same name for output and input files, which means different
 will interfere with each other and lead to test failure.

 The solution is simple for now: don't run parallell make when testing.
+
+
+* Bugs in gcc 3.0 triggered
+
+According to a problem report, there are bugs in gcc 3.0 that are
+triggered by some of the code in OpenSSL, more specifically in
+PEM_get_EVP_CIPHER_INFO().  The triggering code is the following:
+
+	header+=11;
+	if (*header != '4') return(0); header++;
+	if (*header != ',') return(0); header++;
+
+What happens is that gcc might optimize a little too agressively, and
+you end up with an extra incrementation when *header != '4'.
+
+We recommend that you upgrade gcc to as high a 3.x version as you can.
+
+* solaris64-sparcv9-cc SHA-1 performance with WorkShop 6 compiler.
+
+As subject suggests SHA-1 might perform poorly (4 times slower)
+if compiled with WorkShop 6 compiler and -xarch=v9. The cause for
+this seems to be the fact that compiler emits multiplication to
+perform shift operations:-( To work the problem around configure
+with './Configure solaris64-sparcv9-cc -DMD32_REG_T=int'.
+
+* Problems with hp-parisc2-cc target when used with "no-asm" flag
+
+When using the hp-parisc2-cc target, wrong bignum code is generated.
+This is due to the SIXTY_FOUR_BIT build being compiled with the +O3
+aggressive optimization.
+The problem manifests itself by the BN_kronecker test hanging in an
+endless loop. Reason: the BN_kronecker test calls BN_generate_prime()
+which itself hangs. The reason could be tracked down to the bn_mul_comba8()
+function in bn_asm.c. At some occasions the higher 32bit value of r[7]
+is off by 1 (meaning: calculated=shouldbe+1). Further analysis failed,
+as no debugger support possible at +O3 and additional fprintf()'s
+introduced fixed the bug, therefore it is most likely a bug in the
+optimizer.
+The bug was found in the BN_kronecker test but may also lead to
+failures in other parts of the code.
+(See Ticket #426.)
+
+Workaround: modify the target to +O2 when building with no-asm.
+
+* Poor support for AIX shared builds.
+
+do_aix-shared rule is not flexible enough to parameterize through a
+config-line. './Configure aix43-cc shared' is working, but not
+'./Configure aix64-gcc shared'. In latter case make fails to create shared
+libraries. It's possible to build 64-bit shared libraries by running
+'env OBJECT_MODE=64 make', but we need more elegant solution. Preferably one
+supporting even gcc shared builds. See RT#463 for background information.
+
+* Problems building shared libraries on SCO OpenServer Release 5.0.6
+  with gcc 2.95.3
+
+The symptoms appear when running the test suite, more specifically
+test/ectest, with the following result:
+
+OSSL_LIBPATH="`cd ..; pwd`"; LD_LIBRARY_PATH="$OSSL_LIBPATH:$LD_LIBRARY_PATH"; DYLD_LIBRARY_PATH="$OSSL_LIBPATH:$DYLD_LIBRARY_PATH"; SHLIB_PATH="$OSSL_LIBPATH:$SHLIB_PATH"; LIBPATH="$OSSL_LIBPATH:$LIBPATH"; if [ "debug-sco5-gcc" = "Cygwin" ]; then PATH="${LIBPATH}:$PATH"; fi; export LD_LIBRARY_PATH DYLD_LIBRARY_PATH SHLIB_PATH LIBPATH PATH; ./ectest
+ectest.c:186: ABORT
+
+The cause of the problem seems to be that isxdigit(), called from
+BN_hex2bn(), returns 0 on a perfectly legitimate hex digit.  Further
+investigation shows that any of the isxxx() macros return 0 on any
+input.  A direct look in the information array that the isxxx() use,
+called __ctype, shows that it contains all zeroes...
+
+Taking a look at the newly created libcrypto.so with nm, one can see
+that the variable __ctype is defined in libcrypto's .bss (which
+explains why it is filled with zeroes):
+
+$ nm -Pg libcrypto.so | grep __ctype
+__ctype B 0011659c
+__ctype2 U         
+
+Curiously, __ctype2 is undefined, in spite of being declared in
+/usr/include/ctype.h in exactly the same way as __ctype.
+
+Any information helping to solve this issue would be deeply
+appreciated.
+
+NOTE: building non-shared doesn't come with this problem.
--- a/1
+++ b/1
@@ -185,3 +185,4 @@
 # ./Configure dist; make clean
 # cd ..
 # diff -ur openssl-orig openssl-work > mydiffs.patch
+
--- a/34
+++ b/34
@@ -1,15 +1,14 @@

  OpenSSL STATUS                           Last modified at
-  ______________                           $Date: 2002/11/21 22:39:08 $
+  ______________                           $Date: 2003/02/28 15:17:45 $

  DEVELOPMENT STATE

    o  OpenSSL 0.9.8:  Under development...
-    o  OpenSSL 0.9.7-beta4: Released on November 19th, 2002
-       Debian GNU/Linux (kernel version 2.4.19, gcc 2.95.4)	- PASSED
-    o  OpenSSL 0.9.7-beta3: Released on July 30th, 2002
-    o  OpenSSL 0.9.7-beta2: Released on June 16th, 2002
-    o  OpenSSL 0.9.7-beta1: Released on June  1st, 2002
+    o  OpenSSL 0.9.7a: Released on February  19th, 2003
+    o  OpenSSL 0.9.7:  Released on December  31st, 2002
+    o  OpenSSL 0.9.6i: Released on February  19th, 2003
+    o  OpenSSL 0.9.6h: Released on December   5th, 2002
    o  OpenSSL 0.9.6g: Released on August     9th, 2002
    o  OpenSSL 0.9.6f: Released on August     8th, 2002
    o  OpenSSL 0.9.6e: Released on July      30th, 2002
@@ -30,20 +29,7 @@

  RELEASE SHOWSTOPPERS

-    o BN_mod_mul verification fails for mips3-sgi-irix
-      unless configured with no-asm
-
-    o [2002-11-21]
-      PR 343 mentions that scrubbing memory with 'memset(ptr, 0, n)' may
-      be optimized away in modern compilers.  This is definitely not good
-      and needs to be fixed immediately.  The formula to use is presented
-      in:
-
-      http://online.securityfocus.com/archive/82/297918/2002-10-27/2002-11-02/0
-
-      The problem report that mentions this is:
-
-      https://www.aet.TU-Cottbus.DE/rt2/Ticket/Display.html?id=343
+    o 

  AVAILABLE PATCHES

@@ -66,9 +52,13 @@
 	UTIL (a new set of library functions to support some higher level
 	      functionality that is currently missing).
 	Shared library support for VMS.
-	Kerberos 5 authentication
+	Kerberos 5 authentication (Heimdal)
 	Constification
-	OCSP
+	Compression
+	Attribute Certificate support
+	Certificate Pair support
+	Storage Engines (primarly an LDAP storage engine)
+	Certificate chain validation with full RFC 3280 compatibility

  NEEDS PATCH

--- a/896
+++ b/896
--- a/apps/CA.pl.in
+++ b/apps/CA.pl.in
@@ -37,7 +37,8 @@
 # demoCA ... where everything is stored

 $SSLEAY_CONFIG=$ENV{"SSLEAY_CONFIG"};
-$DAYS="-days 365";
+$DAYS="-days 365";	# 1 year
+$CADAYS="-days 1095";	# 3 years
 $REQ="openssl req $SSLEAY_CONFIG";
 $CA="openssl ca $SSLEAY_CONFIG";
 $VERIFY="openssl verify";
@@ -46,6 +47,7 @@ $PKCS12="openssl pkcs12";

 $CATOP="./demoCA";
 $CAKEY="cakey.pem";
+$CAREQ="careq.pem";
 $CACERT="cacert.pem";

 $DIRMODE = 0777;
@@ -101,8 +103,11 @@ foreach (@ARGV) {
 		    $RET=$?;
 		} else {
 		    print "Making CA certificate ...\n";
-		    system ("$REQ -new -x509 -keyout " .
-			"${CATOP}/private/$CAKEY -out ${CATOP}/$CACERT $DAYS");
+		    system ("$REQ -new -keyout " .
+			"${CATOP}/private/$CAKEY -out ${CATOP}/$CAREQ");
+		    system ("$CA -out ${CATOP}/$CACERT $CADAYS -batch " . 
+			"-keyfile ${CATOP}/private/$CAKEY -selfsign " .
+			"-infiles ${CATOP}/$CAREQ ");
 		    $RET=$?;
 		}
 	    }
--- a/apps/CA.sh
+++ b/apps/CA.sh
@@ -30,7 +30,8 @@
 # default openssl.cnf file has setup as per the following
 # demoCA ... where everything is stored

-DAYS="-days 365"
+DAYS="-days 365"	# 1 year
+CADAYS="-days 1095"	# 3 years
 REQ="openssl req $SSLEAY_CONFIG"
 CA="openssl ca $SSLEAY_CONFIG"
 VERIFY="openssl verify"
@@ -38,6 +39,7 @@ X509="openssl x509"

 CATOP=./demoCA
 CAKEY=./cakey.pem
+CAREQ=./careq.pem
 CACERT=./cacert.pem

 for i
@@ -70,7 +72,7 @@ case $i in
 	mkdir ${CATOP}/crl 
 	mkdir ${CATOP}/newcerts
 	mkdir ${CATOP}/private
-	echo "01" > ${CATOP}/serial
+	echo "00" > ${CATOP}/serial
 	touch ${CATOP}/index.txt
    fi
    if [ ! -f ${CATOP}/private/$CAKEY ]; then
@@ -83,8 +85,11 @@ case $i in
 	    RET=$?
 	else
 	    echo "Making CA certificate ..."
-	    $REQ -new -x509 -keyout ${CATOP}/private/$CAKEY \
-			   -out ${CATOP}/$CACERT $DAYS
+	    $REQ -new -keyout ${CATOP}/private/$CAKEY \
+			   -out ${CATOP}/$CAREQ
+	    $CA -out ${CATOP}/$CACERT $CADAYS -batch \
+			   -keyfile ${CATOP}/private/$CAKEY -selfsign \
+			   -infiles ${CATOP}/$CAREQ 
 	    RET=$?
 	fi
    fi
--- a/apps/Makefile.ssl
+++ b/apps/Makefile.ssl
--- a/apps/apps.c
+++ b/apps/apps.c
@@ -122,26 +122,14 @@
 #include <openssl/pkcs12.h>
 #include <openssl/ui.h>
 #include <openssl/safestack.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
-
-#ifdef OPENSSL_SYS_WINDOWS
-#define strcasecmp _stricmp
-#else
-#  ifdef NO_STRINGS_H
-    int	strcasecmp();
-#  else
-#    include <strings.h>
-#  endif /* NO_STRINGS_H */
 #endif

 #define NON_MAIN
 #include "apps.h"
 #undef NON_MAIN

-#ifdef OPENSSL_SYS_WINDOWS
-#  include "bss_file.c"
-#endif
-
 typedef struct {
 	char *name;
 	unsigned long flag;
@@ -262,7 +250,7 @@ int str2fmt(char *s)
 		return(FORMAT_UNDEF);
 	}

-#if defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_WIN32) || defined(OPENSSL_SYS_WIN16)
+#if defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_WIN32) || defined(OPENSSL_SYS_WIN16) || defined(OPENSSL_SYS_NETWARE)
 void program_name(char *in, char *out, int size)
 	{
 	int i,n;
@@ -281,12 +269,23 @@ void program_name(char *in, char *out, int size)
 	if (p == NULL)
 		p=in;
 	n=strlen(p);
+
+#if defined(OPENSSL_SYS_NETWARE)
+   /* strip off trailing .nlm if present. */
+   if ((n > 4) && (p[n-4] == '.') &&
+      ((p[n-3] == 'n') || (p[n-3] == 'N')) &&
+      ((p[n-2] == 'l') || (p[n-2] == 'L')) &&
+      ((p[n-1] == 'm') || (p[n-1] == 'M')))
+      n-=4;
+#else
 	/* strip off trailing .exe if present. */
 	if ((n > 4) && (p[n-4] == '.') &&
 		((p[n-3] == 'e') || (p[n-3] == 'E')) &&
 		((p[n-2] == 'x') || (p[n-2] == 'X')) &&
 		((p[n-1] == 'e') || (p[n-1] == 'E')))
 		n-=4;
+#endif
+
 	if (n > size-1)
 		n=size-1;

@@ -380,22 +379,6 @@ int WIN32_rename(char *from, char *to)
 	}
 #endif

-#ifdef OPENSSL_SYS_VMS
-int VMS_strcasecmp(const char *str1, const char *str2)
-	{
-	while (*str1 && *str2)
-		{
-		int res = toupper(*str1) - toupper(*str2);
-		if (res) return res < 0 ? -1 : 1;
-		}
-	if (*str1)
-		return 1;
-	if (*str2)
-		return -1;
-	return 0;
-	}
-#endif
-
 int chopup_args(ARGS *arg, char *buf, int *argc, char **argv[])
 	{
 	int num,len,i;
@@ -503,7 +486,7 @@ static int ui_read(UI *ui, UI_STRING *uis)
 			{
 			const char *password =
 				((PW_CB_DATA *)UI_get0_user_data(ui))->password;
-			if (password[0] != '\0')
+			if (password && password[0] != '\0')
 				{
 				UI_set_result(ui, uis, password);
 				return 1;
@@ -527,7 +510,7 @@ static int ui_write(UI *ui, UI_STRING *uis)
 			{
 			const char *password =
 				((PW_CB_DATA *)UI_get0_user_data(ui))->password;
-			if (password[0] != '\0')
+			if (password && password[0] != '\0')
 				return 1;
 			}
 		default:
@@ -615,7 +598,7 @@ int password_callback(char *buf, int bufsiz, int verify,

 		if (buff)
 			{
-			memset(buff,0,(unsigned int)bufsiz);
+			OPENSSL_cleanse(buff,(unsigned int)bufsiz);
 			OPENSSL_free(buff);
 			}

@@ -625,13 +608,13 @@ int password_callback(char *buf, int bufsiz, int verify,
 			{
 			BIO_printf(bio_err, "User interface error\n");
 			ERR_print_errors(bio_err);
-			memset(buf,0,(unsigned int)bufsiz);
+			OPENSSL_cleanse(buf,(unsigned int)bufsiz);
 			res = 0;
 			}
 		if (ok == -2)
 			{
 			BIO_printf(bio_err,"aborted!\n");
-			memset(buf,0,(unsigned int)bufsiz);
+			OPENSSL_cleanse(buf,(unsigned int)bufsiz);
 			res = 0;
 			}
 		UI_free(ui);
@@ -775,7 +758,7 @@ X509 *load_cert(BIO *err, const char *file, int format,
 		x=d2i_X509_bio(cert,NULL);
 	else if (format == FORMAT_NETSCAPE)
 		{
-		unsigned char *p,*op;
+		const unsigned char *p,*op;
 		int size=0,i;

 		/* We sort of have to do it this way because it is sort of nice
@@ -859,6 +842,7 @@ EVP_PKEY *load_key(BIO *err, const char *file, int format, int maybe_stdin,
 		BIO_printf(err,"no keyfile specified\n");
 		goto end;
 		}
+#ifndef OPENSSL_NO_ENGINE
 	if (format == FORMAT_ENGINE)
 		{
 		if (!e)
@@ -868,6 +852,7 @@ EVP_PKEY *load_key(BIO *err, const char *file, int format, int maybe_stdin,
 				ui_method, &cb_data);
 		goto end;
 		}
+#endif
 	key=BIO_new(BIO_s_file());
 	if (key == NULL)
 		{
@@ -935,6 +920,7 @@ EVP_PKEY *load_pubkey(BIO *err, const char *file, int format, int maybe_stdin,
 		BIO_printf(err,"no keyfile specified\n");
 		goto end;
 		}
+#ifndef OPENSSL_NO_ENGINE
 	if (format == FORMAT_ENGINE)
 		{
 		if (!e)
@@ -944,6 +930,7 @@ EVP_PKEY *load_pubkey(BIO *err, const char *file, int format, int maybe_stdin,
 				ui_method, &cb_data);
 		goto end;
 		}
+#endif
 	key=BIO_new(BIO_s_file());
 	if (key == NULL)
 		{
@@ -1329,6 +1316,7 @@ X509_STORE *setup_verify(BIO *bp, char *CAfile, char *CApath)
 	return NULL;
 }

+#ifndef OPENSSL_NO_ENGINE
 /* Try to load an engine in a shareable library */
 static ENGINE *try_load_engine(BIO *err, const char *engine, int debug)
 	{
@@ -1385,6 +1373,7 @@ ENGINE *setup_engine(BIO *err, const char *engine, int debug)
 		}
        return e;
        }
+#endif

 int load_config(BIO *err, CONF *cnf)
 	{
@@ -1407,14 +1396,721 @@ int load_config(BIO *err, CONF *cnf)
 char *make_config_name()
 	{
 	const char *t=X509_get_default_cert_area();
+	size_t len;
 	char *p;

-	p=OPENSSL_malloc(strlen(t)+strlen(OPENSSL_CONF)+2);
-	strcpy(p,t);
+	len=strlen(t)+strlen(OPENSSL_CONF)+2;
+	p=OPENSSL_malloc(len);
+	BUF_strlcpy(p,t,len);
 #ifndef OPENSSL_SYS_VMS
-	strcat(p,"/");
+	BUF_strlcat(p,"/",len);
 #endif
-	strcat(p,OPENSSL_CONF);
+	BUF_strlcat(p,OPENSSL_CONF,len);

 	return p;
 	}
+
+static unsigned long index_serial_hash(const char **a)
+	{
+	const char *n;
+
+	n=a[DB_serial];
+	while (*n == '0') n++;
+	return(lh_strhash(n));
+	}
+
+static int index_serial_cmp(const char **a, const char **b)
+	{
+	const char *aa,*bb;
+
+	for (aa=a[DB_serial]; *aa == '0'; aa++);
+	for (bb=b[DB_serial]; *bb == '0'; bb++);
+	return(strcmp(aa,bb));
+	}
+
+static int index_name_qual(char **a)
+	{ return(a[0][0] == 'V'); }
+
+static unsigned long index_name_hash(const char **a)
+	{ return(lh_strhash(a[DB_name])); }
+
+int index_name_cmp(const char **a, const char **b)
+	{ return(strcmp(a[DB_name],
+	     b[DB_name])); }
+
+static IMPLEMENT_LHASH_HASH_FN(index_serial_hash,const char **)
+static IMPLEMENT_LHASH_COMP_FN(index_serial_cmp,const char **)
+static IMPLEMENT_LHASH_HASH_FN(index_name_hash,const char **)
+static IMPLEMENT_LHASH_COMP_FN(index_name_cmp,const char **)
+
+#undef BSIZE
+#define BSIZE 256
+
+BIGNUM *load_serial(char *serialfile, int create, ASN1_INTEGER **retai)
+	{
+	BIO *in=NULL;
+	BIGNUM *ret=NULL;
+	MS_STATIC char buf[1024];
+	ASN1_INTEGER *ai=NULL;
+
+	ai=ASN1_INTEGER_new();
+	if (ai == NULL) goto err;
+
+	if ((in=BIO_new(BIO_s_file())) == NULL)
+		{
+		ERR_print_errors(bio_err);
+		goto err;
+		}
+
+	if (BIO_read_filename(in,serialfile) <= 0)
+		{
+		if (!create)
+			{
+			perror(serialfile);
+			goto err;
+			}
+		else
+			{
+			ASN1_INTEGER_set(ai,1);
+			ret=BN_new();
+			if (ret == NULL)
+				BIO_printf(bio_err, "Out of memory\n");
+			else
+				BN_one(ret);
+			}
+		}
+	else
+		{
+		if (!a2i_ASN1_INTEGER(in,ai,buf,1024))
+			{
+			BIO_printf(bio_err,"unable to load number from %s\n",
+				serialfile);
+			goto err;
+			}
+		ret=ASN1_INTEGER_to_BN(ai,NULL);
+		if (ret == NULL)
+			{
+			BIO_printf(bio_err,"error converting number from bin to BIGNUM\n");
+			goto err;
+			}
+		}
+
+	if (ret && retai)
+		{
+		*retai = ai;
+		ai = NULL;
+		}
+ err:
+	if (in != NULL) BIO_free(in);
+	if (ai != NULL) ASN1_INTEGER_free(ai);
+	return(ret);
+	}
+
+int save_serial(char *serialfile, char *suffix, BIGNUM *serial, ASN1_INTEGER **retai)
+	{
+	char buf[1][BSIZE];
+	BIO *out = NULL;
+	int ret=0;
+	ASN1_INTEGER *ai=NULL;
+	int j;
+
+	if (suffix == NULL)
+		j = strlen(serialfile);
+	else
+		j = strlen(serialfile) + strlen(suffix) + 1;
+	if (j >= BSIZE)
+		{
+		BIO_printf(bio_err,"file name too long\n");
+		goto err;
+		}
+
+	if (suffix == NULL)
+		BUF_strlcpy(buf[0], serialfile, BSIZE);
+	else
+		{
+#ifndef OPENSSL_SYS_VMS
+		j = BIO_snprintf(buf[0], sizeof buf[0], "%s.%s", serialfile, suffix);
+#else
+		j = BIO_snprintf(buf[0], sizeof buf[0], "%s-%s", serialfile, suffix);
+#endif
+		}
+#ifdef RL_DEBUG
+	BIO_printf(bio_err, "DEBUG: writing \"%s\"\n", buf[0]);
+#endif
+	out=BIO_new(BIO_s_file());
+	if (out == NULL)
+		{
+		ERR_print_errors(bio_err);
+		goto err;
+		}
+	if (BIO_write_filename(out,buf[0]) <= 0)
+		{
+		perror(serialfile);
+		goto err;
+		}
+
+	if ((ai=BN_to_ASN1_INTEGER(serial,NULL)) == NULL)
+		{
+		BIO_printf(bio_err,"error converting serial to ASN.1 format\n");
+		goto err;
+		}
+	i2a_ASN1_INTEGER(out,ai);
+	BIO_puts(out,"\n");
+	ret=1;
+	if (retai)
+		{
+		*retai = ai;
+		ai = NULL;
+		}
+err:
+	if (out != NULL) BIO_free_all(out);
+	if (ai != NULL) ASN1_INTEGER_free(ai);
+	return(ret);
+	}
+
+int rotate_serial(char *serialfile, char *new_suffix, char *old_suffix)
+	{
+	char buf[5][BSIZE];
+	int i,j;
+	struct stat sb;
+
+	i = strlen(serialfile) + strlen(old_suffix);
+	j = strlen(serialfile) + strlen(new_suffix);
+	if (i > j) j = i;
+	if (j + 1 >= BSIZE)
+		{
+		BIO_printf(bio_err,"file name too long\n");
+		goto err;
+		}
+
+#ifndef OPENSSL_SYS_VMS
+	j = BIO_snprintf(buf[0], sizeof buf[0], "%s.%s",
+		serialfile, new_suffix);
+#else
+	j = BIO_snprintf(buf[0], sizeof buf[0], "%s-%s",
+		serialfile, new_suffix);
+#endif
+#ifndef OPENSSL_SYS_VMS
+	j = BIO_snprintf(buf[1], sizeof buf[1], "%s.%s",
+		serialfile, old_suffix);
+#else
+	j = BIO_snprintf(buf[1], sizeof buf[1], "%s-%s",
+		serialfile, old_suffix);
+#endif
+	if (stat(serialfile,&sb) < 0)
+		{
+		if (errno != ENOENT 
+#ifdef ENOTDIR
+			&& errno != ENOTDIR)
+#endif
+			goto err;
+		}
+	else
+		{
+#ifdef RL_DEBUG
+		BIO_printf(bio_err, "DEBUG: renaming \"%s\" to \"%s\"\n",
+			serialfile, buf[1]);
+#endif
+		if (rename(serialfile,buf[1]) < 0)
+			{
+			BIO_printf(bio_err,
+				"unable to rename %s to %s\n",
+				serialfile, buf[1]);
+			perror("reason");
+			goto err;
+			}
+		}
+#ifdef RL_DEBUG
+	BIO_printf(bio_err, "DEBUG: renaming \"%s\" to \"%s\"\n",
+		buf[0],serialfile);
+#endif
+	if (rename(buf[0],serialfile) < 0)
+		{
+		BIO_printf(bio_err,
+			"unable to rename %s to %s\n",
+			buf[0],serialfile);
+		perror("reason");
+		rename(buf[1],serialfile);
+		goto err;
+		}
+	return 1;
+ err:
+	return 0;
+	}
+
+CA_DB *load_index(char *dbfile, DB_ATTR *db_attr)
+	{
+	CA_DB *retdb = NULL;
+	TXT_DB *tmpdb = NULL;
+	BIO *in = BIO_new(BIO_s_file());
+	CONF *dbattr_conf = NULL;
+	char buf[1][BSIZE];
+	long errorline= -1;
+
+	if (in == NULL)
+		{
+		ERR_print_errors(bio_err);
+		goto err;
+		}
+	if (BIO_read_filename(in,dbfile) <= 0)
+		{
+		perror(dbfile);
+		BIO_printf(bio_err,"unable to open '%s'\n",dbfile);
+		goto err;
+		}
+	if ((tmpdb = TXT_DB_read(in,DB_NUMBER)) == NULL)
+		{
+		if (tmpdb != NULL) TXT_DB_free(tmpdb);
+		goto err;
+		}
+
+#ifndef OPENSSL_SYS_VMS
+	BIO_snprintf(buf[0], sizeof buf[0], "%s.attr", dbfile);
+#else
+	BIO_snprintf(buf[0], sizeof buf[0], "%s-attr", dbfile);
+#endif
+	dbattr_conf = NCONF_new(NULL);
+	if (NCONF_load(dbattr_conf,buf[0],&errorline) <= 0)
+		{
+		if (errorline > 0)
+			{
+			BIO_printf(bio_err,
+				"error on line %ld of db attribute file '%s'\n"
+				,errorline,buf[0]);
+			goto err;
+			}
+		else
+			{
+			NCONF_free(dbattr_conf);
+			dbattr_conf = NULL;
+			}
+		}
+
+	if ((retdb = OPENSSL_malloc(sizeof(CA_DB))) == NULL)
+		{
+		fprintf(stderr, "Out of memory\n");
+		goto err;
+		}
+
+	retdb->db = tmpdb;
+	tmpdb = NULL;
+	if (db_attr)
+		retdb->attributes = *db_attr;
+	else
+		{
+		retdb->attributes.unique_subject = 1;
+		}
+
+	if (dbattr_conf)
+		{
+		char *p = NCONF_get_string(dbattr_conf,NULL,"unique_subject");
+		if (p)
+			{
+#ifdef RL_DEBUG
+			BIO_printf(bio_err, "DEBUG[load_index]: unique_subject = \"%s\"\n", p);
+#endif
+			retdb->attributes.unique_subject = parse_yesno(p,1);
+			}
+		}
+
+ err:
+	if (dbattr_conf) NCONF_free(dbattr_conf);
+	if (tmpdb) TXT_DB_free(tmpdb);
+	if (in) BIO_free_all(in);
+	return retdb;
+	}
+
+int index_index(CA_DB *db)
+	{
+	if (!TXT_DB_create_index(db->db, DB_serial, NULL,
+				LHASH_HASH_FN(index_serial_hash),
+				LHASH_COMP_FN(index_serial_cmp)))
+		{
+		BIO_printf(bio_err,
+		  "error creating serial number index:(%ld,%ld,%ld)\n",
+		  			db->db->error,db->db->arg1,db->db->arg2);
+			return 0;
+		}
+
+	if (db->attributes.unique_subject
+		&& !TXT_DB_create_index(db->db, DB_name, index_name_qual,
+			LHASH_HASH_FN(index_name_hash),
+			LHASH_COMP_FN(index_name_cmp)))
+		{
+		BIO_printf(bio_err,"error creating name index:(%ld,%ld,%ld)\n",
+			db->db->error,db->db->arg1,db->db->arg2);
+		return 0;
+		}
+	return 1;
+	}
+
+int save_index(char *dbfile, char *suffix, CA_DB *db)
+	{
+	char buf[3][BSIZE];
+	BIO *out = BIO_new(BIO_s_file());
+	int j;
+
+	if (out == NULL)
+		{
+		ERR_print_errors(bio_err);
+		goto err;
+		}
+
+	j = strlen(dbfile) + strlen(suffix);
+	if (j + 6 >= BSIZE)
+		{
+		BIO_printf(bio_err,"file name too long\n");
+		goto err;
+		}
+
+#ifndef OPENSSL_SYS_VMS
+	j = BIO_snprintf(buf[2], sizeof buf[2], "%s.attr", dbfile);
+#else
+	j = BIO_snprintf(buf[2], sizeof buf[2], "%s-attr", dbfile);
+#endif
+#ifndef OPENSSL_SYS_VMS
+	j = BIO_snprintf(buf[1], sizeof buf[1], "%s.attr.%s", dbfile, suffix);
+#else
+	j = BIO_snprintf(buf[1], sizeof buf[1], "%s-attr-%s", dbfile, suffix);
+#endif
+#ifndef OPENSSL_SYS_VMS
+	j = BIO_snprintf(buf[0], sizeof buf[0], "%s.%s", dbfile, suffix);
+#else
+	j = BIO_snprintf(buf[0], sizeof buf[0], "%s-%s", dbfile, suffix);
+#endif
+#ifdef RL_DEBUG
+	BIO_printf(bio_err, "DEBUG: writing \"%s\"\n", buf[0]);
+#endif
+	if (BIO_write_filename(out,buf[0]) <= 0)
+		{
+		perror(dbfile);
+		BIO_printf(bio_err,"unable to open '%s'\n", dbfile);
+		goto err;
+		}
+	j=TXT_DB_write(out,db->db);
+	if (j <= 0) goto err;
+			
+	BIO_free(out);
+
+	out = BIO_new(BIO_s_file());
+#ifdef RL_DEBUG
+	BIO_printf(bio_err, "DEBUG: writing \"%s\"\n", buf[1]);
+#endif
+	if (BIO_write_filename(out,buf[1]) <= 0)
+		{
+		perror(buf[2]);
+		BIO_printf(bio_err,"unable to open '%s'\n", buf[2]);
+		goto err;
+		}
+	BIO_printf(out,"unique_subject = %s\n",
+		db->attributes.unique_subject ? "yes" : "no");
+	BIO_free(out);
+
+	return 1;
+ err:
+	return 0;
+	}
+
+int rotate_index(char *dbfile, char *new_suffix, char *old_suffix)
+	{
+	char buf[5][BSIZE];
+	int i,j;
+	struct stat sb;
+
+	i = strlen(dbfile) + strlen(old_suffix);
+	j = strlen(dbfile) + strlen(new_suffix);
+	if (i > j) j = i;
+	if (j + 6 >= BSIZE)
+		{
+		BIO_printf(bio_err,"file name too long\n");
+		goto err;
+		}
+
+#ifndef OPENSSL_SYS_VMS
+	j = BIO_snprintf(buf[4], sizeof buf[4], "%s.attr", dbfile);
+#else
+	j = BIO_snprintf(buf[4], sizeof buf[4], "%s-attr", dbfile);
+#endif
+#ifndef OPENSSL_SYS_VMS
+	j = BIO_snprintf(buf[2], sizeof buf[2], "%s.attr.%s",
+		dbfile, new_suffix);
+#else
+	j = BIO_snprintf(buf[2], sizeof buf[2], "%s-attr-%s",
+		dbfile, new_suffix);
+#endif
+#ifndef OPENSSL_SYS_VMS
+	j = BIO_snprintf(buf[0], sizeof buf[0], "%s.%s",
+		dbfile, new_suffix);
+#else
+	j = BIO_snprintf(buf[0], sizeof buf[0], "%s-%s",
+		dbfile, new_suffix);
+#endif
+#ifndef OPENSSL_SYS_VMS
+	j = BIO_snprintf(buf[1], sizeof buf[1], "%s.%s",
+		dbfile, old_suffix);
+#else
+	j = BIO_snprintf(buf[1], sizeof buf[1], "%s-%s",
+		dbfile, old_suffix);
+#endif
+#ifndef OPENSSL_SYS_VMS
+	j = BIO_snprintf(buf[3], sizeof buf[3], "%s.attr.%s",
+		dbfile, old_suffix);
+#else
+	j = BIO_snprintf(buf[3], sizeof buf[3], "%s-attr-%s",
+		dbfile, old_suffix);
+#endif
+	if (stat(dbfile,&sb) < 0)
+		{
+		if (errno != ENOENT 
+#ifdef ENOTDIR
+			&& errno != ENOTDIR)
+#endif
+			goto err;
+		}
+	else
+		{
+#ifdef RL_DEBUG
+		BIO_printf(bio_err, "DEBUG: renaming \"%s\" to \"%s\"\n",
+			dbfile, buf[1]);
+#endif
+		if (rename(dbfile,buf[1]) < 0)
+			{
+			BIO_printf(bio_err,
+				"unable to rename %s to %s\n",
+				dbfile, buf[1]);
+			perror("reason");
+			goto err;
+			}
+		}
+#ifdef RL_DEBUG
+	BIO_printf(bio_err, "DEBUG: renaming \"%s\" to \"%s\"\n",
+		buf[0],dbfile);
+#endif
+	if (rename(buf[0],dbfile) < 0)
+		{
+		BIO_printf(bio_err,
+			"unable to rename %s to %s\n",
+			buf[0],dbfile);
+		perror("reason");
+		rename(buf[1],dbfile);
+		goto err;
+		}
+	if (stat(buf[4],&sb) < 0)
+		{
+		if (errno != ENOENT 
+#ifdef ENOTDIR
+			&& errno != ENOTDIR)
+#endif
+			goto err;
+		}
+	else
+		{
+#ifdef RL_DEBUG
+		BIO_printf(bio_err, "DEBUG: renaming \"%s\" to \"%s\"\n",
+			buf[4],buf[3]);
+#endif
+		if (rename(buf[4],buf[3]) < 0)
+			{
+			BIO_printf(bio_err,
+				"unable to rename %s to %s\n",
+				buf[4], buf[3]);
+			perror("reason");
+			rename(dbfile,buf[0]);
+			rename(buf[1],dbfile);
+			goto err;
+			}
+		}
+#ifdef RL_DEBUG
+	BIO_printf(bio_err, "DEBUG: renaming \"%s\" to \"%s\"\n",
+		buf[2],buf[4]);
+#endif
+	if (rename(buf[2],buf[4]) < 0)
+		{
+		BIO_printf(bio_err,
+			"unable to rename %s to %s\n",
+			buf[2],buf[4]);
+		perror("reason");
+		rename(buf[3],buf[4]);
+		rename(dbfile,buf[0]);
+		rename(buf[1],dbfile);
+		goto err;
+		}
+	return 1;
+ err:
+	return 0;
+	}
+
+void free_index(CA_DB *db)
+	{
+	if (db)
+		{
+		if (db->db) TXT_DB_free(db->db);
+		OPENSSL_free(db);
+		}
+	}
+
+int parse_yesno(char *str, int def)
+	{
+	int ret = def;
+	if (str)
+		{
+		switch (*str)
+			{
+		case 'f': /* false */
+		case 'F': /* FALSE */
+		case 'n': /* no */
+		case 'N': /* NO */
+		case '0': /* 0 */
+			ret = 0;
+			break;
+		case 't': /* true */
+		case 'T': /* TRUE */
+		case 'y': /* yes */
+		case 'Y': /* YES */
+		case '1': /* 1 */
+			ret = 0;
+			break;
+		default:
+			ret = def;
+			break;
+			}
+		}
+	return ret;
+	}
+
+/*
+ * subject is expected to be in the format /type0=value0/type1=value1/type2=...
+ * where characters may be escaped by \
+ */
+X509_NAME *parse_name(char *subject, long chtype, int multirdn)
+	{
+	size_t buflen = strlen(subject)+1; /* to copy the types and values into. due to escaping, the copy can only become shorter */
+	char *buf = OPENSSL_malloc(buflen);
+	size_t max_ne = buflen / 2 + 1; /* maximum number of name elements */
+	char **ne_types = OPENSSL_malloc(max_ne * sizeof (char *));
+	char **ne_values = OPENSSL_malloc(max_ne * sizeof (char *));
+	int *mval = OPENSSL_malloc (max_ne * sizeof (int));
+
+	char *sp = subject, *bp = buf;
+	int i, ne_num = 0;
+
+	X509_NAME *n = NULL;
+	int nid;
+
+	if (!buf || !ne_types || !ne_values)
+		{
+		BIO_printf(bio_err, "malloc error\n");
+		goto error;
+		}	
+
+	if (*subject != '/')
+		{
+		BIO_printf(bio_err, "Subject does not start with '/'.\n");
+		goto error;
+		}
+	sp++; /* skip leading / */
+
+	/* no multivalued RDN by default */
+	mval[ne_num] = 0;
+
+	while (*sp)
+		{
+		/* collect type */
+		ne_types[ne_num] = bp;
+		while (*sp)
+			{
+			if (*sp == '\\') /* is there anything to escape in the type...? */
+				{
+				if (*++sp)
+					*bp++ = *sp++;
+				else	
+					{
+					BIO_printf(bio_err, "escape character at end of string\n");
+					goto error;
+					}
+				}	
+			else if (*sp == '=')
+				{
+				sp++;
+				*bp++ = '\0';
+				break;
+				}
+			else
+				*bp++ = *sp++;
+			}
+		if (!*sp)
+			{
+			BIO_printf(bio_err, "end of string encountered while processing type of subject name element #%d\n", ne_num);
+			goto error;
+			}
+		ne_values[ne_num] = bp;
+		while (*sp)
+			{
+			if (*sp == '\\')
+				{
+				if (*++sp)
+					*bp++ = *sp++;
+				else
+					{
+					BIO_printf(bio_err, "escape character at end of string\n");
+					goto error;
+					}
+				}
+			else if (*sp == '/')
+				{
+				sp++;
+				/* no multivalued RDN by default */
+				mval[ne_num+1] = 0;
+				break;
+				}
+			else if (*sp == '+' && multirdn)
+				{
+				/* a not escaped + signals a mutlivalued RDN */
+				sp++;
+				mval[ne_num+1] = -1;
+				break;
+				}
+			else
+				*bp++ = *sp++;
+			}
+		*bp++ = '\0';
+		ne_num++;
+		}	
+
+	if (!(n = X509_NAME_new()))
+		goto error;
+
+	for (i = 0; i < ne_num; i++)
+		{
+		if ((nid=OBJ_txt2nid(ne_types[i])) == NID_undef)
+			{
+			BIO_printf(bio_err, "Subject Attribute %s has no known NID, skipped\n", ne_types[i]);
+			continue;
+			}
+
+		if (!*ne_values[i])
+			{
+			BIO_printf(bio_err, "No value provided for Subject Attribute %s, skipped\n", ne_types[i]);
+			continue;
+			}
+
+		if (!X509_NAME_add_entry_by_NID(n, nid, chtype, (unsigned char*)ne_values[i], -1,-1,mval[i]))
+			goto error;
+		}
+
+	OPENSSL_free(ne_values);
+	OPENSSL_free(ne_types);
+	OPENSSL_free(buf);
+	return n;
+
+error:
+	X509_NAME_free(n);
+	if (ne_values)
+		OPENSSL_free(ne_values);
+	if (ne_types)
+		OPENSSL_free(ne_types);
+	if (buf)
+		OPENSSL_free(buf);
+	return NULL;
+}
+
--- a/apps/apps.h
+++ b/apps/apps.h
@@ -121,7 +121,9 @@
 #include <openssl/lhash.h>
 #include <openssl/conf.h>
 #include <openssl/txt_db.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
+#endif
 #include <openssl/ossl_typ.h>

 int app_RAND_load_file(const char *file, BIO *bio_e, int dont_warn);
@@ -139,12 +141,6 @@ long app_RAND_load_files(char *file); /* `file' is a list of files to read,
 int WIN32_rename(char *oldname,char *newname);
 #endif

-/* VMS below version 7.0 doesn't have strcasecmp() */
-#ifdef OPENSSL_SYS_VMS
-#define strcasecmp(str1,str2) VMS_strcasecmp((str1),(str2))
-int VMS_strcasecmp(const char *str1, const char *str2);
-#endif
-
 #ifndef MONOLITH

 #define MAIN(a,v)	main(a,v)
@@ -166,7 +162,9 @@ extern BIO *bio_err;

 #endif

+#ifndef OPENSSL_SYS_NETWARE
 #include <signal.h>
+#endif

 #ifdef SIGPIPE
 #define do_pipe_sig()	signal(SIGPIPE,SIG_IGN)
@@ -179,6 +177,7 @@ extern BIO *bio_err;
 		do_pipe_sig()
 #  define apps_shutdown()
 #else
+#  ifndef OPENSSL_NO_ENGINE
 #    if defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_WIN16) || \
     defined(OPENSSL_SYS_WIN32)
 #      ifdef _O_BINARY
@@ -203,6 +202,32 @@ extern BIO *bio_err;
 			EVP_cleanup(); ENGINE_cleanup(); \
 			CRYPTO_cleanup_all_ex_data(); ERR_remove_state(0); \
 			ERR_free_strings(); } while(0)
+#  else
+#    if defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_WIN16) || \
+     defined(OPENSSL_SYS_WIN32)
+#      ifdef _O_BINARY
+#        define apps_startup() \
+			do { _fmode=_O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
+			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
+			setup_ui_method(); } while(0)
+#      else
+#        define apps_startup() \
+			do { _fmode=O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
+			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
+			setup_ui_method(); } while(0)
+#      endif
+#    else
+#      define apps_startup() \
+			do { do_pipe_sig(); OpenSSL_add_all_algorithms(); \
+			ERR_load_crypto_strings(); \
+			setup_ui_method(); } while(0)
+#    endif
+#    define apps_shutdown() \
+			do { CONF_modules_unload(1); destroy_ui_method(); \
+			EVP_cleanup(); \
+			CRYPTO_cleanup_all_ex_data(); ERR_remove_state(0); \
+			ERR_free_strings(); } while(0)
+#  endif
 #endif

 typedef struct args_st
@@ -248,7 +273,9 @@ EVP_PKEY *load_pubkey(BIO *err, const char *file, int format, int maybe_stdin,
 STACK_OF(X509) *load_certs(BIO *err, const char *file, int format,
 	const char *pass, ENGINE *e, const char *cert_descrip);
 X509_STORE *setup_verify(BIO *bp, char *CAfile, char *CApath);
+#ifndef OPENSSL_NO_ENGINE
 ENGINE *setup_engine(BIO *err, const char *engine, int debug);
+#endif

 int load_config(BIO *err, CONF *cnf);
 char *make_config_name(void);
@@ -256,9 +283,41 @@ char *make_config_name(void);
 /* Functions defined in ca.c and also used in ocsp.c */
 int unpack_revinfo(ASN1_TIME **prevtm, int *preason, ASN1_OBJECT **phold,
 			ASN1_GENERALIZEDTIME **pinvtm, char *str);
-int make_serial_index(TXT_DB *db);

-X509_NAME *do_subject(char *str, long chtype);
+#define DB_type         0
+#define DB_exp_date     1
+#define DB_rev_date     2
+#define DB_serial       3       /* index - unique */
+#define DB_file         4       
+#define DB_name         5       /* index - unique when active and not disabled */
+#define DB_NUMBER       6
+
+#define DB_TYPE_REV	'R'
+#define DB_TYPE_EXP	'E'
+#define DB_TYPE_VAL	'V'
+
+typedef struct db_attr_st
+	{
+	int unique_subject;
+	} DB_ATTR;
+typedef struct ca_db_st
+	{
+	DB_ATTR attributes;
+	TXT_DB *db;
+	} CA_DB;
+
+BIGNUM *load_serial(char *serialfile, int create, ASN1_INTEGER **retai);
+int save_serial(char *serialfile, char *suffix, BIGNUM *serial, ASN1_INTEGER **retai);
+int rotate_serial(char *serialfile, char *new_suffix, char *old_suffix);
+CA_DB *load_index(char *dbfile, DB_ATTR *dbattr);
+int index_index(CA_DB *db);
+int save_index(char *dbfile, char *suffix, CA_DB *db);
+int rotate_index(char *dbfile, char *new_suffix, char *old_suffix);
+void free_index(CA_DB *db);
+int index_name_cmp(const char **a, const char **b);
+int parse_yesno(char *str, int def);
+
+X509_NAME *parse_name(char *str, long chtype, int multirdn);

 #define FORMAT_UNDEF    0
 #define FORMAT_ASN1     1
--- a/apps/asn1pars.c
+++ b/apps/asn1pars.c
@@ -94,6 +94,7 @@ int MAIN(int argc, char **argv)
 	char *infile=NULL,*str=NULL,*prog,*oidfile=NULL, *derfile=NULL;
 	char *genstr=NULL, *genconf=NULL;
 	unsigned char *tmpbuf;
+	const unsigned char *ctmpbuf;
 	BUF_MEM *buf=NULL;
 	STACK *osk=NULL;
 	ASN1_TYPE *at=NULL;
@@ -317,7 +318,8 @@ bad:
 			tmpbuf+=j;
 			tmplen-=j;
 			atmp = at;
-			at = d2i_ASN1_TYPE(NULL,&tmpbuf,tmplen);
+			ctmpbuf = tmpbuf;
+			at = d2i_ASN1_TYPE(NULL,&ctmpbuf,tmplen);
 			ASN1_TYPE_free(atmp);
 			if(!at)
 				{
@@ -333,7 +335,15 @@ bad:
 		num=tmplen;
 		}

-	if (length == 0) length=(unsigned int)num;
+	if (offset >= num)
+		{
+		BIO_printf(bio_err, "Error: offset too large\n");
+		goto end;
+		}
+
+	num -= offset;
+
+	if ((length == 0) || ((long)length > num)) length=(unsigned int)num;
 	if(derout) {
 		if(BIO_write(derout, str + offset, length) != (int)length) {
 			BIO_printf(bio_err, "Error writing output\n");
@@ -361,7 +371,7 @@ end:
 	if (osk != NULL) sk_free(osk);
 	OBJ_cleanup();
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

 static int do_generate(BIO *bio, char *genstr, char *genconf, BUF_MEM *buf)
--- a/apps/ca.c
+++ b/apps/ca.c
--- a/apps/ciphers.c
+++ b/apps/ciphers.c
@@ -203,6 +203,6 @@ end:
 	if (ssl != NULL) SSL_free(ssl);
 	if (STDout != NULL) BIO_free_all(STDout);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

--- a/apps/crl.c
+++ b/apps/crl.c
@@ -81,6 +81,7 @@ static char *crl_usage[]={
 " -in arg         - input file - default stdin\n",
 " -out arg        - output file - default stdout\n",
 " -hash           - print hash value\n",
+" -fingerprint    - print the crl fingerprint\n",
 " -issuer         - print issuer DN\n",
 " -lastupdate     - lastUpdate field\n",
 " -nextupdate     - nextUpdate field\n",
@@ -377,7 +378,7 @@ end:
 		X509_STORE_free(store);
 	}
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

 static X509_CRL *load_crl(char *infile, int format)
--- a/apps/crl2p7.c
+++ b/apps/crl2p7.c
@@ -280,7 +280,7 @@ end:
 	if (crl != NULL) X509_CRL_free(crl);

 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

 /*
--- a/apps/dgst.c
+++ b/apps/dgst.c
@@ -100,7 +100,9 @@ int MAIN(int argc, char **argv)
 	EVP_PKEY *sigkey = NULL;
 	unsigned char *sigbuf = NULL;
 	int siglen = 0;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif

 	apps_startup();

@@ -166,11 +168,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) break;
 			keyform=str2fmt(*(++argv));
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) break;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-hex") == 0)
 			out_bin = 0;
 		else if (strcmp(*argv,"-binary") == 0)
@@ -208,7 +212,9 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err,"-keyform arg    key file format (PEM or ENGINE)\n");
 		BIO_printf(bio_err,"-signature file signature to verify\n");
 		BIO_printf(bio_err,"-binary         output in binary form\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err,"-engine e       use engine e, possibly a hardware device.\n");
+#endif

 		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm (default)\n",
 			LN_md5,LN_md5);
@@ -228,7 +234,9 @@ int MAIN(int argc, char **argv)
 		goto end;
 		}

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 	in=BIO_new(BIO_s_file());
 	bmd=BIO_new(BIO_f_md());
@@ -339,8 +347,9 @@ int MAIN(int argc, char **argv)
 				}
 			if(!out_bin)
 				{
-				tmp=tofree=OPENSSL_malloc(strlen(name)+strlen(argv[i])+5);
-				sprintf(tmp,"%s(%s)= ",name,argv[i]);
+				size_t len = strlen(name)+strlen(argv[i])+5;
+				tmp=tofree=OPENSSL_malloc(len);
+				BIO_snprintf(tmp,len,"%s(%s)= ",name,argv[i]);
 				}
 			else
 				tmp="";
@@ -356,7 +365,7 @@ int MAIN(int argc, char **argv)
 end:
 	if (buf != NULL)
 		{
-		memset(buf,0,BUFSIZE);
+		OPENSSL_cleanse(buf,BUFSIZE);
 		OPENSSL_free(buf);
 		}
 	if (in != NULL) BIO_free(in);
@@ -365,7 +374,7 @@ end:
 	if(sigbuf) OPENSSL_free(sigbuf);
 	if (bmd != NULL) BIO_free(bmd);
 	apps_shutdown();
-	EXIT(err);
+	OPENSSL_EXIT(err);
 	}

 int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
--- a/apps/dh.c
+++ b/apps/dh.c
@@ -87,12 +87,17 @@ int MAIN(int, char **);

 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	DH *dh=NULL;
 	int i,badops=0,text=0;
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat,check=0,noout=0,C=0,ret=1;
-	char *infile,*outfile,*prog,*engine;
+	char *infile,*outfile,*prog;
+#ifndef OPENSSL_NO_ENGINE
+	char *engine;
+#endif

 	apps_startup();

@@ -103,7 +108,9 @@ int MAIN(int argc, char **argv)
 	if (!load_config(bio_err, NULL))
 		goto end;

+#ifndef OPENSSL_NO_ENGINE
 	engine=NULL;
+#endif
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -134,11 +141,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outfile= *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-check") == 0)
 			check=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -170,13 +179,17 @@ bad:
 		BIO_printf(bio_err," -text         print a text form of the DH parameters\n");
 		BIO_printf(bio_err," -C            Output C code\n");
 		BIO_printf(bio_err," -noout        no output\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
+#endif
 		goto end;
 		}

 	ERR_load_crypto_strings();

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 	in=BIO_new(BIO_s_file());
 	out=BIO_new(BIO_s_file());
@@ -333,6 +346,6 @@ end:
 	if (out != NULL) BIO_free_all(out);
 	if (dh != NULL) DH_free(dh);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 #endif
--- a/apps/dhparam.c
+++ b/apps/dhparam.c
@@ -142,13 +142,15 @@
 * -C
 */

-static void MS_CALLBACK dh_cb(int p, int n, void *arg);
+static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb);

 int MAIN(int, char **);

 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	DH *dh=NULL;
 	int i,badops=0,text=0;
 #ifndef OPENSSL_NO_DSA
@@ -157,7 +159,10 @@ int MAIN(int argc, char **argv)
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat,check=0,noout=0,C=0,ret=1;
 	char *infile,*outfile,*prog;
-	char *inrand=NULL,*engine=NULL;
+	char *inrand=NULL;
+#ifndef OPENSSL_NO_ENGINE
+	char *engine=NULL;
+#endif
 	int num = 0, g = 0;

 	apps_startup();
@@ -199,11 +204,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outfile= *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-check") == 0)
 			check=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -249,7 +256,9 @@ bad:
 		BIO_printf(bio_err," -2            generate parameters using  2 as the generator value\n");
 		BIO_printf(bio_err," -5            generate parameters using  5 as the generator value\n");
 		BIO_printf(bio_err," numbits       number of bits in to generate (default 512)\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
+#endif
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"               - load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"               the random number generator\n");
@@ -259,7 +268,9 @@ bad:

 	ERR_load_crypto_strings();

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 	if (g && !num)
 		num = DEFBITS;
@@ -283,6 +294,8 @@ bad:

 	if(num) {

+		BN_GENCB cb;
+		BN_GENCB_set(&cb, dh_cb, bio_err);
 		if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL)
 			{
 			BIO_printf(bio_err,"warning, not much extra random data, consider using the -rand option\n");
@@ -294,12 +307,13 @@ bad:
 #ifndef OPENSSL_NO_DSA
 		if (dsaparam)
 			{
-			DSA *dsa;
+			DSA *dsa = DSA_new();
 			
 			BIO_printf(bio_err,"Generating DSA parameters, %d bit long prime\n",num);
-			dsa = DSA_generate_parameters(num, NULL, 0, NULL, NULL, dh_cb, bio_err);
-			if (dsa == NULL)
+			if(!dsa || !DSA_generate_parameters_ex(dsa, num,
+						NULL, 0, NULL, NULL, &cb))
 				{
+				if(dsa) DSA_free(dsa);
 				ERR_print_errors(bio_err);
 				goto end;
 				}
@@ -315,12 +329,12 @@ bad:
 		else
 #endif
 			{
+			dh = DH_new();
 			BIO_printf(bio_err,"Generating DH parameters, %d bit long safe prime, generator %d\n",num,g);
 			BIO_printf(bio_err,"This is going to take a long time\n");
-			dh=DH_generate_parameters(num,g,dh_cb,bio_err);
-			
-			if (dh == NULL)
+			if(!dh || !DH_generate_parameters_ex(dh, num, g, &cb))
 				{
+				if(dh) DH_free(dh);
 				ERR_print_errors(bio_err);
 				goto end;
 				}
@@ -519,11 +533,11 @@ end:
 	if (out != NULL) BIO_free_all(out);
 	if (dh != NULL) DH_free(dh);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

 /* dh_cb is identical to dsa_cb in apps/dsaparam.c */
-static void MS_CALLBACK dh_cb(int p, int n, void *arg)
+static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb)
 	{
 	char c='*';

@@ -531,11 +545,12 @@ static void MS_CALLBACK dh_cb(int p, int n, void *arg)
 	if (p == 1) c='+';
 	if (p == 2) c='*';
 	if (p == 3) c='\n';
-	BIO_write((BIO *)arg,&c,1);
-	(void)BIO_flush((BIO *)arg);
+	BIO_write(cb->arg,&c,1);
+	(void)BIO_flush(cb->arg);
 #ifdef LINT
 	p=n;
 #endif
+	return 1;
 	}

 #endif
--- a/apps/dsa.c
+++ b/apps/dsa.c
@@ -90,7 +90,9 @@ int MAIN(int, char **);

 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	int ret=1;
 	DSA *dsa=NULL;
 	int i,badops=0;
@@ -98,7 +100,10 @@ int MAIN(int argc, char **argv)
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat,text=0,noout=0;
 	int pubin = 0, pubout = 0;
-	char *infile,*outfile,*prog,*engine;
+	char *infile,*outfile,*prog;
+#ifndef OPENSSL_NO_ENGINE
+	char *engine;
+#endif
 	char *passargin = NULL, *passargout = NULL;
 	char *passin = NULL, *passout = NULL;
 	int modulus=0;
@@ -112,7 +117,9 @@ int MAIN(int argc, char **argv)
 	if (!load_config(bio_err, NULL))
 		goto end;

+#ifndef OPENSSL_NO_ENGINE
 	engine=NULL;
+#endif
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -153,11 +160,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passargout= *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-noout") == 0)
 			noout=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -189,7 +198,9 @@ bad:
 		BIO_printf(bio_err," -passin arg     input file pass phrase source\n");
 		BIO_printf(bio_err," -out arg        output file\n");
 		BIO_printf(bio_err," -passout arg    output file pass phrase source\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
+#endif
 		BIO_printf(bio_err," -des            encrypt PEM output with cbc des\n");
 		BIO_printf(bio_err," -des3           encrypt PEM output with ede cbc des using 168 bit key\n");
 #ifndef OPENSSL_NO_IDEA
@@ -207,7 +218,9 @@ bad:

 	ERR_load_crypto_strings();

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
 		BIO_printf(bio_err, "Error getting passwords\n");
@@ -314,6 +327,6 @@ end:
 	if(passin) OPENSSL_free(passin);
 	if(passout) OPENSSL_free(passout);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 #endif
--- a/apps/dsaparam.c
+++ b/apps/dsaparam.c
@@ -56,6 +56,12 @@
 * [including the GNU Public Licence.]
 */

+/* Until the key-gen callbacks are modified to use newer prototypes, we allow
+ * deprecated functions for openssl-internal code */
+#ifdef OPENSSL_NO_DEPRECATED
+#undef OPENSSL_NO_DEPRECATED
+#endif
+
 #ifndef OPENSSL_NO_DSA
 #include <assert.h>
 #include <stdio.h>
@@ -82,15 +88,31 @@
 * -C
 * -noout
 * -genkey
+ *  #ifdef GENCB_TEST
+ * -timebomb n  - interrupt keygen after <n> seconds
+ *  #endif
 */

-static void MS_CALLBACK dsa_cb(int p, int n, void *arg);
+#ifdef GENCB_TEST
+
+static int stop_keygen_flag = 0;
+
+static void timebomb_sigalarm(int foo)
+	{
+	stop_keygen_flag = 1;
+	}
+
+#endif
+
+static int MS_CALLBACK dsa_cb(int p, int n, BN_GENCB *cb);

 int MAIN(int, char **);

 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	DSA *dsa=NULL;
 	int i,badops=0,text=0;
 	BIO *in=NULL,*out=NULL;
@@ -98,7 +120,12 @@ int MAIN(int argc, char **argv)
 	char *infile,*outfile,*prog,*inrand=NULL;
 	int numbits= -1,num,genkey=0;
 	int need_rand=0;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
+#ifdef GENCB_TEST
+	int timebomb=0;
+#endif

 	apps_startup();

@@ -139,11 +166,20 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outfile= *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if(strcmp(*argv, "-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine = *(++argv);
 			}
+#endif
+#ifdef GENCB_TEST
+		else if(strcmp(*argv, "-timebomb") == 0)
+			{
+			if (--argc < 1) goto bad;
+			timebomb = atoi(*(++argv));
+			}
+#endif
 		else if (strcmp(*argv,"-text") == 0)
 			text=1;
 		else if (strcmp(*argv,"-C") == 0)
@@ -191,7 +227,12 @@ bad:
 		BIO_printf(bio_err," -noout        no output\n");
 		BIO_printf(bio_err," -genkey       generate a DSA key\n");
 		BIO_printf(bio_err," -rand         files to use for random number input\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
+#endif
+#ifdef GENCB_TEST
+		BIO_printf(bio_err," -timebomb n   interrupt keygen after <n> seconds\n");
+#endif
 		BIO_printf(bio_err," number        number of bits to use for generating private key\n");
 		goto end;
 		}
@@ -235,7 +276,9 @@ bad:
 			}
 		}

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 	if (need_rand)
 		{
@@ -247,10 +290,47 @@ bad:

 	if (numbits > 0)
 		{
+		BN_GENCB cb;
+		BN_GENCB_set(&cb, dsa_cb, bio_err);
 		assert(need_rand);
+		dsa = DSA_new();
+		if(!dsa)
+			{
+			BIO_printf(bio_err,"Error allocating DSA object\n");
+			goto end;
+			}
 		BIO_printf(bio_err,"Generating DSA parameters, %d bit long prime\n",num);
 	        BIO_printf(bio_err,"This could take some time\n");
-	        dsa=DSA_generate_parameters(num,NULL,0,NULL,NULL, dsa_cb,bio_err);
+#ifdef GENCB_TEST
+		if(timebomb > 0)
+	{
+		struct sigaction act;
+		act.sa_handler = timebomb_sigalarm;
+		act.sa_flags = 0;
+		BIO_printf(bio_err,"(though I'll stop it if not done within %d secs)\n",
+				timebomb);
+		if(sigaction(SIGALRM, &act, NULL) != 0)
+			{
+			BIO_printf(bio_err,"Error, couldn't set SIGALRM handler\n");
+			goto end;
+			}
+		alarm(timebomb);
+	}
+#endif
+	        if(!DSA_generate_parameters_ex(dsa,num,NULL,0,NULL,NULL, &cb))
+			{
+#ifdef GENCB_TEST
+			if(stop_keygen_flag)
+				{
+				BIO_printf(bio_err,"DSA key generation time-stopped\n");
+				/* This is an asked-for behaviour! */
+				ret = 0;
+				goto end;
+				}
+#endif
+			BIO_printf(bio_err,"Error, DSA key generation failed\n");
+			goto end;
+			}
 		}
 	else if	(informat == FORMAT_ASN1)
 		dsa=d2i_DSAparams_bio(in,NULL);
@@ -372,10 +452,10 @@ end:
 	if (out != NULL) BIO_free_all(out);
 	if (dsa != NULL) DSA_free(dsa);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

-static void MS_CALLBACK dsa_cb(int p, int n, void *arg)
+static int MS_CALLBACK dsa_cb(int p, int n, BN_GENCB *cb)
 	{
 	char c='*';

@@ -383,10 +463,15 @@ static void MS_CALLBACK dsa_cb(int p, int n, void *arg)
 	if (p == 1) c='+';
 	if (p == 2) c='*';
 	if (p == 3) c='\n';
-	BIO_write(arg,&c,1);
-	(void)BIO_flush(arg);
+	BIO_write(cb->arg,&c,1);
+	(void)BIO_flush(cb->arg);
 #ifdef LINT
 	p=n;
 #endif
+#ifdef GENCB_TEST
+	if(stop_keygen_flag)
+		return 0;
+#endif
+	return 1;
 	}
 #endif
--- a/apps/ec.c
+++ b/apps/ec.c
@@ -390,6 +390,6 @@ end:
 	if (passout)
 		OPENSSL_free(passout);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 }
 #endif
--- a/apps/ecparam.c
+++ b/apps/ecparam.c
@@ -383,7 +383,26 @@ bad:

 	if (curve_name != NULL)
 		{
-		int nid = OBJ_sn2nid(curve_name);
+		int nid;
+
+		/* workaround for the SECG curve names secp192r1
+		 * and secp256r1 (which are the same as the curves
+		 * prime192v1 and prime256v1 defined in X9.62)
+		 */
+		if (!strcmp(curve_name, "secp192r1"))
+			{
+			BIO_printf(bio_err, "using curve name prime192v1 "
+				"instead of secp192r1\n");
+			nid = NID_X9_62_prime192v1;
+			}
+		else if (!strcmp(curve_name, "secp256r1"))
+			{
+			BIO_printf(bio_err, "using curve name prime256v1 "
+				"instead of secp256r1\n");
+			nid = NID_X9_62_prime256v1;
+			}
+		else
+			nid = OBJ_sn2nid(curve_name);
 	
 		if (nid == 0)
 			{
@@ -679,10 +698,10 @@ end:
 	if (group != NULL)
 		EC_GROUP_free(group);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 }

-int ecparam_print_var(BIO *out, BIGNUM *in, const char *var,
+static int ecparam_print_var(BIO *out, BIGNUM *in, const char *var,
 	int len, unsigned char *buffer)
 	{
 	BIO_printf(out, "static unsigned char %s_%d[] = {", var, len);
--- a/apps/enc.c
+++ b/apps/enc.c
@@ -100,7 +100,9 @@ int MAIN(int, char **);

 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	static const char magic[]="Salted__";
 	char mbuf[sizeof magic-1];
 	char *strbuf=NULL;
@@ -119,7 +121,9 @@ int MAIN(int argc, char **argv)
 	BIO *in=NULL,*out=NULL,*b64=NULL,*benc=NULL,*rbio=NULL,*wbio=NULL;
 #define PROG_NAME_SIZE  39
 	char pname[PROG_NAME_SIZE+1];
+#ifndef OPENSSL_NO_ENGINE
 	char *engine = NULL;
+#endif

 	apps_startup();

@@ -163,11 +167,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passarg= *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if	(strcmp(*argv,"-d") == 0)
 			enc=0;
 		else if	(strcmp(*argv,"-p") == 0)
@@ -270,7 +276,9 @@ bad:
 			BIO_printf(bio_err,"%-14s key/iv in hex is the next argument\n","-K/-iv");
 			BIO_printf(bio_err,"%-14s print the iv/key (then exit if -P)\n","-[pP]");
 			BIO_printf(bio_err,"%-14s buffer size\n","-bufsize <n>");
+#ifndef OPENSSL_NO_ENGINE
 			BIO_printf(bio_err,"%-14s use engine e, possibly a hardware device.\n","-engine e");
+#endif

 			BIO_printf(bio_err,"Cipher Types\n");
 			OBJ_NAME_do_all_sorted(OBJ_NAME_TYPE_CIPHER_METH,
@@ -284,7 +292,9 @@ bad:
 		argv++;
 		}

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 	if (bufsize != NULL)
 		{
@@ -363,7 +373,7 @@ bad:
 			{
 			char buf[200];

-			sprintf(buf,"enter %s %s password:",
+			BIO_snprintf(buf,sizeof buf,"enter %s %s password:",
 				     OBJ_nid2ln(EVP_CIPHER_nid(cipher)),
 				     (enc)?"encryption":"decryption");
 			strbuf[0]='\0';
@@ -481,9 +491,9 @@ bad:
 			 * bug picked up by
 			 * Larry J. Hughes Jr. <hughes@indiana.edu> */
 			if (str == strbuf)
-				memset(str,0,SIZE);
+				OPENSSL_cleanse(str,SIZE);
 			else
-				memset(str,0,strlen(str));
+				OPENSSL_cleanse(str,strlen(str));
 			}
 		if ((hiv != NULL) && !set_hex(hiv,iv,sizeof iv))
 			{
@@ -524,7 +534,7 @@ bad:
 			if (!nosalt)
 				{
 				printf("salt=");
-				for (i=0; i<sizeof salt; i++)
+				for (i=0; i<(int)sizeof(salt); i++)
 					printf("%02X",salt[i]);
 				printf("\n");
 				}
@@ -586,7 +596,7 @@ end:
 	if (b64 != NULL) BIO_free(b64);
 	if(pass) OPENSSL_free(pass);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

 int set_hex(char *in, unsigned char *out, int size)
--- a/apps/engine.c
+++ b/apps/engine.c
@@ -56,6 +56,8 @@
 *
 */

+#ifndef OPENSSL_NO_ENGINE
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -77,7 +79,8 @@ static char *engine_usage[]={
 "               -vvv will also add the input flags for each command\n",
 "               -vvvv will also show internal input flags\n",
 " -c          - for each engine, also list the capabilities\n",
-" -t          - for each engine, check that they are really available\n",
+" -t[t]       - for each engine, check that they are really available\n",
+"               -tt will display error trace for unavailable engines\n",
 " -pre <cmd>  - runs command 'cmd' against the ENGINE before any attempts\n",
 "               to load it (if -t is used)\n",
 " -post <cmd> - runs command 'cmd' against the ENGINE after loading it\n",
@@ -120,8 +123,8 @@ static int append_buf(char **buf, const char *s, int *size, int step)
 		return 0;

 	if (**buf != '\0')
-		strcat(*buf, ", ");
-	strcat(*buf, s);
+		BUF_strlcat(*buf, ", ", *size);
+	BUF_strlcat(*buf, s, *size);

 	return 1;
 	}
@@ -342,7 +345,7 @@ int MAIN(int argc, char **argv)
 	{
 	int ret=1,i;
 	char **pp;
-	int verbose=0, list_cap=0, test_avail=0;
+	int verbose=0, list_cap=0, test_avail=0, test_avail_noise = 0;
 	ENGINE *e;
 	STACK *engines = sk_new_null();
 	STACK *pre_cmds = sk_new_null();
@@ -380,8 +383,14 @@ int MAIN(int argc, char **argv)
 			}
 		else if (strcmp(*argv,"-c") == 0)
 			list_cap=1;
-		else if (strcmp(*argv,"-t") == 0)
+		else if (strncmp(*argv,"-t",2) == 0)
+			{
 			test_avail=1;
+			if(strspn(*argv + 1, "t") < strlen(*argv + 1))
+				goto skip_arg_loop;
+			if((test_avail_noise = strlen(*argv + 1) - 1) > 1)
+				goto skip_arg_loop;
+			}
 		else if (strcmp(*argv,"-pre") == 0)
 			{
 			argc--; argv++;
@@ -496,6 +505,7 @@ skip_digests:
 				else
 					{
 					BIO_printf(bio_out, "[ unavailable ]\n");
+					if(test_avail_noise)
 						ERR_print_errors_fp(stdout);
 					ERR_clear_error();
 					}
@@ -510,11 +520,19 @@ skip_digests:

 	ret=0;
 end:
+
 	ERR_print_errors(bio_err);
 	sk_pop_free(engines, identity);
 	sk_pop_free(pre_cmds, identity);
 	sk_pop_free(post_cmds, identity);
 	if (bio_out != NULL) BIO_free_all(bio_out);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
+#else
+
+# if PEDANTIC
+static void *dummy=&dummy;
+# endif
+
+#endif
--- a/apps/errstr.c
+++ b/apps/errstr.c
@@ -122,5 +122,5 @@ int MAIN(int argc, char **argv)
 			}
 		}
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
--- a/apps/gendh.c
+++ b/apps/gendh.c
@@ -57,6 +57,12 @@
 * [including the GNU Public Licence.]
 */

+/* Until the key-gen callbacks are modified to use newer prototypes, we allow
+ * deprecated functions for openssl-internal code */
+#ifdef OPENSSL_NO_DEPRECATED
+#undef OPENSSL_NO_DEPRECATED
+#endif
+
 #ifndef OPENSSL_NO_DH
 #include <stdio.h>
 #include <string.h>
@@ -75,23 +81,29 @@
 #undef PROG
 #define PROG gendh_main

-static void MS_CALLBACK dh_cb(int p, int n, void *arg);
+static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb);

 int MAIN(int, char **);

 int MAIN(int argc, char **argv)
 	{
+	BN_GENCB cb;
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	DH *dh=NULL;
 	int ret=1,num=DEFBITS;
 	int g=2;
 	char *outfile=NULL;
 	char *inrand=NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
 	BIO *out=NULL;

 	apps_startup();

+	BN_GENCB_set(&cb, dh_cb, bio_err);
 	if (bio_err == NULL)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
@@ -115,11 +127,13 @@ int MAIN(int argc, char **argv)
 			g=3; */
 		else if (strcmp(*argv,"-5") == 0)
 			g=5;
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -138,14 +152,18 @@ bad:
 		BIO_printf(bio_err," -2        - use 2 as the generator value\n");
 	/*	BIO_printf(bio_err," -3        - use 3 as the generator value\n"); */
 		BIO_printf(bio_err," -5        - use 5 as the generator value\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e - use engine e, possibly a hardware device.\n");
+#endif
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"           - load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"             the random number generator\n");
 		goto end;
 		}
 		
+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 	out=BIO_new(BIO_s_file());
 	if (out == NULL)
@@ -183,9 +201,9 @@ bad:

 	BIO_printf(bio_err,"Generating DH parameters, %d bit long safe prime, generator %d\n",num,g);
 	BIO_printf(bio_err,"This is going to take a long time\n");
-	dh=DH_generate_parameters(num,g,dh_cb,bio_err);

-	if (dh == NULL) goto end;
+	if(((dh = DH_new()) == NULL) || !DH_generate_parameters_ex(dh, num, g, &cb))
+		goto end;
 		
 	app_RAND_write_file(NULL, bio_err);

@@ -198,10 +216,10 @@ end:
 	if (out != NULL) BIO_free_all(out);
 	if (dh != NULL) DH_free(dh);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

-static void MS_CALLBACK dh_cb(int p, int n, void *arg)
+static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb)
 	{
 	char c='*';

@@ -209,10 +227,11 @@ static void MS_CALLBACK dh_cb(int p, int n, void *arg)
 	if (p == 1) c='+';
 	if (p == 2) c='*';
 	if (p == 3) c='\n';
-	BIO_write((BIO *)arg,&c,1);
-	(void)BIO_flush((BIO *)arg);
+	BIO_write(cb->arg,&c,1);
+	(void)BIO_flush(cb->arg);
 #ifdef LINT
 	p=n;
 #endif
+	return 1;
 	}
 #endif
--- a/apps/gendsa.c
+++ b/apps/gendsa.c
@@ -77,7 +77,9 @@ int MAIN(int, char **);

 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	DSA *dsa=NULL;
 	int ret=1;
 	char *outfile=NULL;
@@ -85,7 +87,9 @@ int MAIN(int argc, char **argv)
 	char *passargout = NULL, *passout = NULL;
 	BIO *out=NULL,*in=NULL;
 	const EVP_CIPHER *enc=NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif

 	apps_startup();

@@ -111,11 +115,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passargout= *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -167,7 +173,9 @@ bad:
 		BIO_printf(bio_err," -aes128, -aes192, -aes256\n");
 		BIO_printf(bio_err,"                 encrypt PEM output with cbc aes\n");
 #endif
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e - use engine e, possibly a hardware device.\n");
+#endif
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"           - load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"             the random number generator\n");
@@ -176,7 +184,9 @@ bad:
 		goto end;
 		}

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 	if(!app_passwd(bio_err, NULL, passargout, NULL, &passout)) {
 		BIO_printf(bio_err, "Error getting password\n");
@@ -246,6 +256,6 @@ end:
 	if (dsa != NULL) DSA_free(dsa);
 	if(passout) OPENSSL_free(passout);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 #endif
--- a/apps/genrsa.c
+++ b/apps/genrsa.c
@@ -56,6 +56,12 @@
 * [including the GNU Public Licence.]
 */

+/* Until the key-gen callbacks are modified to use newer prototypes, we allow
+ * deprecated functions for openssl-internal code */
+#ifdef OPENSSL_NO_DEPRECATED
+#undef OPENSSL_NO_DEPRECATED
+#endif
+
 #ifndef OPENSSL_NO_RSA
 #include <stdio.h>
 #include <string.h>
@@ -75,13 +81,16 @@
 #undef PROG
 #define PROG genrsa_main

-static void MS_CALLBACK genrsa_cb(int p, int n, void *arg);
+static int MS_CALLBACK genrsa_cb(int p, int n, BN_GENCB *cb);

 int MAIN(int, char **);

 int MAIN(int argc, char **argv)
 	{
+	BN_GENCB cb;
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	int ret=1;
 	RSA *rsa=NULL;
 	int i,num=DEFBITS;
@@ -90,11 +99,14 @@ int MAIN(int argc, char **argv)
 	unsigned long f4=RSA_F4;
 	char *outfile=NULL;
 	char *passargout = NULL, *passout = NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
 	char *inrand=NULL;
 	BIO *out=NULL;

 	apps_startup();
+	BN_GENCB_set(&cb, genrsa_cb, bio_err);

 	if (bio_err == NULL)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
@@ -122,11 +134,13 @@ int MAIN(int argc, char **argv)
 			f4=3;
 		else if (strcmp(*argv,"-F4") == 0 || strcmp(*argv,"-f4") == 0)
 			f4=RSA_F4;
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -177,7 +191,9 @@ bad:
 		BIO_printf(bio_err," -passout arg    output file pass phrase source\n");
 		BIO_printf(bio_err," -f4             use F4 (0x10001) for the E value\n");
 		BIO_printf(bio_err," -3              use 3 for the E value\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
+#endif
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"                 load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"                 the random number generator\n");
@@ -191,7 +207,9 @@ bad:
 		goto err;
 	}

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 	if (outfile == NULL)
 		{
@@ -223,7 +241,9 @@ bad:

 	BIO_printf(bio_err,"Generating RSA private key, %d bit long modulus\n",
 		num);
-	rsa=RSA_generate_key(num,f4,genrsa_cb,bio_err);
+
+	if(((rsa = RSA_new()) == NULL) || !RSA_generate_key_ex(rsa, num, f4, &cb))
+		goto err;
 		
 	app_RAND_write_file(NULL, bio_err);

@@ -258,10 +278,10 @@ err:
 	if (ret != 0)
 		ERR_print_errors(bio_err);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

-static void MS_CALLBACK genrsa_cb(int p, int n, void *arg)
+static int MS_CALLBACK genrsa_cb(int p, int n, BN_GENCB *cb)
 	{
 	char c='*';

@@ -269,11 +289,12 @@ static void MS_CALLBACK genrsa_cb(int p, int n, void *arg)
 	if (p == 1) c='+';
 	if (p == 2) c='*';
 	if (p == 3) c='\n';
-	BIO_write((BIO *)arg,&c,1);
-	(void)BIO_flush((BIO *)arg);
+	BIO_write(cb->arg,&c,1);
+	(void)BIO_flush(cb->arg);
 #ifdef LINT
 	p=n;
 #endif
+	return 1;
 	}
 #else /* !OPENSSL_NO_RSA */

--- a/apps/makeapps.com
+++ b/apps/makeapps.com
@@ -166,7 +166,7 @@ $!     TCPIP_PROGRAMS = ",S_SERVER,S_CLIENT,SESS_ID,CIPHERS,S_TIME,"
 $!
 $! Setup exceptional compilations
 $!
-$ COMPILEWITH_CC2 = ",S_SOCKET,S_SERVER,S_CLIENT,"
+$ COMPILEWITH_CC2 = ",S_SERVER,S_CLIENT,"
 $!
 $ PHASE := LIB
 $!
--- a/apps/nseq.c
+++ b/apps/nseq.c
@@ -102,7 +102,7 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-in file  input file\n");
 		BIO_printf (bio_err, "-out file output file\n");
 		BIO_printf (bio_err, "-toseq    output NS Sequence file\n");
-		EXIT(1);
+		OPENSSL_EXIT(1);
 	}

 	if (infile) {
@@ -162,6 +162,6 @@ end:
 	BIO_free_all(out);
 	NETSCAPE_CERT_SEQUENCE_free(seq);

-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 }

--- a/apps/ocsp.c
+++ b/apps/ocsp.c
@@ -55,6 +55,7 @@
 * Hudson (tjh@cryptsoft.com).
 *
 */
+#ifndef OPENSSL_NO_OCSP

 #include <stdio.h>
 #include <string.h>
@@ -67,19 +68,6 @@
 /* Maximum leeway in validity period: default 5 minutes */
 #define MAX_VALIDITY_PERIOD	(5 * 60)

-/* CA index.txt definitions */
-#define DB_type         0
-#define DB_exp_date     1
-#define DB_rev_date     2
-#define DB_serial       3       /* index - unique */
-#define DB_file         4       
-#define DB_name         5       /* index - unique for active */
-#define DB_NUMBER       6
-
-#define DB_TYPE_REV	'R'
-#define DB_TYPE_EXP	'E'
-#define DB_TYPE_VAL	'V'
-
 static int add_ocsp_cert(OCSP_REQUEST **req, X509 *cert, X509 *issuer,
 				STACK_OF(OCSP_CERTID) *ids);
 static int add_ocsp_serial(OCSP_REQUEST **req, char *serial, X509 *issuer,
@@ -88,12 +76,12 @@ static int print_ocsp_summary(BIO *out, OCSP_BASICRESP *bs, OCSP_REQUEST *req,
 				STACK *names, STACK_OF(OCSP_CERTID) *ids,
 				long nsec, long maxage);

-static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, TXT_DB *db,
+static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, CA_DB *db,
 			X509 *ca, X509 *rcert, EVP_PKEY *rkey,
 			STACK_OF(X509) *rother, unsigned long flags,
 			int nmin, int ndays);

-static char **lookup_serial(TXT_DB *db, ASN1_INTEGER *ser);
+static char **lookup_serial(CA_DB *db, ASN1_INTEGER *ser);
 static BIO *init_responder(char *port);
 static int do_responder(OCSP_REQUEST **preq, BIO **pcbio, BIO *acbio, char *port);
 static int send_ocsp_response(BIO *cbio, OCSP_RESPONSE *resp);
@@ -135,13 +123,14 @@ int MAIN(int argc, char **argv)
 	int accept_count = -1;
 	int badarg = 0;
 	int i;
+	int ignore_err = 0;
 	STACK *reqnames = NULL;
 	STACK_OF(OCSP_CERTID) *ids = NULL;

 	X509 *rca_cert = NULL;
 	char *ridx_filename = NULL;
 	char *rca_filename = NULL;
-	TXT_DB *rdb = NULL;
+	CA_DB *rdb = NULL;
 	int nmin = 0, ndays = -1;

 	if (bio_err == NULL) bio_err = BIO_new_fp(stderr, BIO_NOCLOSE);
@@ -194,6 +183,8 @@ int MAIN(int argc, char **argv)
 				}
 			else badarg = 1;
 			}
+		else if (!strcmp(*args, "-ignore_err"))
+			ignore_err = 1;
 		else if (!strcmp(*args, "-noverify"))
 			noverify = 1;
 		else if (!strcmp(*args, "-nonce"))
@@ -523,7 +514,7 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-serial n          serial number to check\n");
 		BIO_printf (bio_err, "-signer file       certificate to sign OCSP request with\n");
 		BIO_printf (bio_err, "-signkey file      private key to sign OCSP request with\n");
-		BIO_printf (bio_err, "-sign_certs file   additional certificates to include in signed request\n");
+		BIO_printf (bio_err, "-sign_other file   additional certificates to include in signed request\n");
 		BIO_printf (bio_err, "-no_certs          don't include any certificates in signed request\n");
 		BIO_printf (bio_err, "-req_text          print text form of request\n");
 		BIO_printf (bio_err, "-resp_text         print text form of response\n");
@@ -543,10 +534,10 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-validity_period n maximum validity discrepancy in seconds\n");
 		BIO_printf (bio_err, "-status_age n      maximum status age in seconds\n");
 		BIO_printf (bio_err, "-noverify          don't verify response at all\n");
-		BIO_printf (bio_err, "-verify_certs file additional certificates to search for signer\n");
+		BIO_printf (bio_err, "-verify_other file additional certificates to search for signer\n");
 		BIO_printf (bio_err, "-trust_other       don't verify additional certificates\n");
 		BIO_printf (bio_err, "-no_intern         don't search certificates contained in response for signer\n");
-		BIO_printf (bio_err, "-no_sig_verify     don't check signature on response\n");
+		BIO_printf (bio_err, "-no_signature_verify don't check signature on response\n");
 		BIO_printf (bio_err, "-no_cert_verify    don't check signing certificate\n");
 		BIO_printf (bio_err, "-no_chain          don't chain verify response\n");
 		BIO_printf (bio_err, "-no_cert_checks    don't do additional checks on signing certificate\n");
@@ -696,22 +687,9 @@ int MAIN(int argc, char **argv)

 	if (ridx_filename && !rdb)
 		{
-		BIO *db_bio = NULL;
-		db_bio = BIO_new_file(ridx_filename, "r");
-		if (!db_bio)
-			{
-			BIO_printf(bio_err, "Error opening index file %s\n", ridx_filename);
-			goto end;
-			}
-		rdb = TXT_DB_read(db_bio, DB_NUMBER);
-		BIO_free(db_bio);
-		if (!rdb)
-			{
-			BIO_printf(bio_err, "Error reading index file %s\n", ridx_filename);
-			goto end;
-			}
-		if (!make_serial_index(rdb))
-			goto end;
+		rdb = load_index(ridx_filename, NULL);
+		if (!rdb) goto end;
+		if (!index_index(rdb)) goto end;
 		}

 	if (rdb)
@@ -722,7 +700,12 @@ int MAIN(int argc, char **argv)
 		}
 	else if (host)
 		{
+#ifndef OPENSSL_NO_SOCK
 		cbio = BIO_new_connect(host);
+#else
+		BIO_printf(bio_err, "Error creating connect BIO - sockets not supported.\n");
+		goto end;
+#endif
 		if (!cbio)
 			{
 			BIO_printf(bio_err, "Error creating connect BIO\n");
@@ -732,7 +715,16 @@ int MAIN(int argc, char **argv)
 		if (use_ssl == 1)
 			{
 			BIO *sbio;
+#if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
 			ctx = SSL_CTX_new(SSLv23_client_method());
+#elif !defined(OPENSSL_NO_SSL3)
+			ctx = SSL_CTX_new(SSLv3_client_method());
+#elif !defined(OPENSSL_NO_SSL2)
+			ctx = SSL_CTX_new(SSLv2_client_method());
+#else
+			BIO_printf(bio_err, "SSL is disabled\n");
+			goto end;
+#endif
 			SSL_CTX_set_mode(ctx, SSL_MODE_AUTO_RETRY);
 			sbio = BIO_new_ssl(ctx, 1);
 			cbio = BIO_push(sbio, cbio);
@@ -792,8 +784,10 @@ int MAIN(int argc, char **argv)

 	if (i != OCSP_RESPONSE_STATUS_SUCCESSFUL)
 		{
-		BIO_printf(out, "Responder Error: %s (%ld)\n",
+		BIO_printf(out, "Responder Error: %s (%d)\n",
 				OCSP_response_status_str(i), i);
+		if (ignore_err)
+			goto redo_accept;
 		ret = 0;
 		goto end;
 		}
@@ -856,7 +850,7 @@ int MAIN(int argc, char **argv)

 		if(i <= 0)
 			{
-			BIO_printf(bio_err, "Response Verify Failure\n", i);
+			BIO_printf(bio_err, "Response Verify Failure\n");
 			ERR_print_errors(bio_err);
 			}
 		else
@@ -879,7 +873,7 @@ end:
 	X509_free(cert);
 	X509_free(rsigner);
 	X509_free(rca_cert);
-	TXT_DB_free(rdb);
+	free_index(rdb);
 	BIO_free_all(cbio);
 	BIO_free_all(acbio);
 	BIO_free(out);
@@ -899,7 +893,7 @@ end:
 		SSL_CTX_free(ctx);
 		}

-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 }

 static int add_ocsp_cert(OCSP_REQUEST **req, X509 *cert, X509 *issuer,
@@ -1021,7 +1015,7 @@ static int print_ocsp_summary(BIO *out, OCSP_BASICRESP *bs, OCSP_REQUEST *req,
 	}


-static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, TXT_DB *db,
+static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, CA_DB *db,
 			X509 *ca, X509 *rcert, EVP_PKEY *rkey,
 			STACK_OF(X509) *rother, unsigned long flags,
 			int nmin, int ndays)
@@ -1113,7 +1107,7 @@ static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, TXT_DB *d

 	}

-static char **lookup_serial(TXT_DB *db, ASN1_INTEGER *ser)
+static char **lookup_serial(CA_DB *db, ASN1_INTEGER *ser)
 	{
 	int i;
 	BIGNUM *bn = NULL;
@@ -1126,7 +1120,7 @@ static char **lookup_serial(TXT_DB *db, ASN1_INTEGER *ser)
 		itmp = BN_bn2hex(bn);
 	row[DB_serial] = itmp;
 	BN_free(bn);
-	rrow=TXT_DB_get_by_index(db,DB_serial,row);
+	rrow=TXT_DB_get_by_index(db->db,DB_serial,row);
 	OPENSSL_free(itmp);
 	return rrow;
 	}
@@ -1139,7 +1133,11 @@ static BIO *init_responder(char *port)
 	bufbio = BIO_new(BIO_f_buffer());
 	if (!bufbio) 
 		goto err;
+#ifndef OPENSSL_NO_SOCK
 	acbio = BIO_new_accept(port);
+#else
+	BIO_printf(bio_err, "Error setting up accept BIO - sockets not supported.\n");
+#endif
 	if (!acbio)
 		goto err;
 	BIO_set_accept_bios(acbio, bufbio);
@@ -1226,3 +1224,4 @@ static int send_ocsp_response(BIO *cbio, OCSP_RESPONSE *resp)
 	return 1;
 	}

+#endif
--- a/apps/openssl.c
+++ b/apps/openssl.c
@@ -122,7 +122,9 @@
 #include <openssl/x509.h>
 #include <openssl/pem.h>
 #include <openssl/ssl.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
+#endif
 #define USE_SOCKETS /* needed for the _O_BINARY defs in the MS world */
 #include "progs.h"
 #include "s_apps.h"
@@ -161,7 +163,7 @@ static void lock_dbg_cb(int mode, int type, const char *file, int line)
 		goto err;
 		}

-	if (type < 0 || type > CRYPTO_NUM_LOCKS)
+	if (type < 0 || type >= CRYPTO_NUM_LOCKS)
 		{
 		errstr = "type out of bounds";
 		goto err;
@@ -358,7 +360,7 @@ end:
 		BIO_free(bio_err);
 		bio_err=NULL;
 		}
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

 #define LIST_STANDARD_COMMANDS "list-standard-commands"
--- a/apps/openssl.cnf
+++ b/apps/openssl.cnf
@@ -38,10 +38,14 @@ dir		= ./demoCA		# Where everything is kept
 certs		= $dir/certs		# Where the issued certs are kept
 crl_dir		= $dir/crl		# Where the issued crl are kept
 database	= $dir/index.txt	# database index file.
+#unique_subject	= no			# Set to 'no' to allow creation of
+					# several ctificates with same subject.
 new_certs_dir	= $dir/newcerts		# default place for new certs.

 certificate	= $dir/cacert.pem 	# The CA certificate
 serial		= $dir/serial 		# The current serial number
+crlnumber	= $dir/crlnumber	# the current crl number
+					# must be commented out to leave a V1 CRL
 crl		= $dir/crl.pem 		# The current CRL
 private_key	= $dir/private/cakey.pem# The private key
 RANDFILE	= $dir/private/.rand	# private random number file
@@ -58,6 +62,7 @@ cert_opt 	= ca_default		# Certificate field options

 # Extensions to add to a CRL. Note: Netscape communicator chokes on V2 CRLs
 # so this is commented out by default to leave a V1 CRL.
+# crlnumber must also be commented out to leave a V1 CRL.
 # crl_extensions	= crl_ext

 default_days	= 365			# how long to certify for
--- a/apps/passwd.c
+++ b/apps/passwd.c
@@ -292,7 +292,7 @@ err:
 	if (out)
 		BIO_free_all(out);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}


@@ -312,7 +312,8 @@ static char *md5crypt(const char *passwd, const char *magic, const char *salt)
 	static char out_buf[6 + 9 + 24 + 2]; /* "$apr1$..salt..$.......md5hash..........\0" */
 	unsigned char buf[MD5_DIGEST_LENGTH];
 	char *salt_out;
-	int n, i;
+	int n;
+	unsigned int i;
 	EVP_MD_CTX md,md2;
 	size_t passwd_len, salt_len;

@@ -505,6 +506,6 @@ err:
 int MAIN(int argc, char **argv)
 	{
 	fputs("Program not available.\n", stderr)
-	EXIT(1);
+	OPENSSL_EXIT(1);
 	}
 #endif
--- a/apps/pkcs12.c
+++ b/apps/pkcs12.c
@@ -120,7 +120,9 @@ int MAIN(int argc, char **argv)
    char *passin = NULL, *passout = NULL;
    char *inrand = NULL;
    char *CApath = NULL, *CAfile = NULL;
+#ifndef OPENSSL_NO_ENGINE
    char *engine=NULL;
+#endif

    apps_startup();

@@ -259,11 +261,13 @@ int MAIN(int argc, char **argv)
 			args++;	
 			CAfile = *args;
 		    } else badarg = 1;
+#ifndef OPENSSL_NO_ENGINE
 		} else if (!strcmp(*args,"-engine")) {
 		    if (args[1]) {
 			args++;	
 			engine = *args;
 		    } else badarg = 1;
+#endif
 		} else badarg = 1;

 	} else badarg = 1;
@@ -311,14 +315,18 @@ int MAIN(int argc, char **argv)
 	BIO_printf (bio_err, "-password p   set import/export password source\n");
 	BIO_printf (bio_err, "-passin p     input file pass phrase source\n");
 	BIO_printf (bio_err, "-passout p    output file pass phrase source\n");
+#ifndef OPENSSL_NO_ENGINE
 	BIO_printf (bio_err, "-engine e     use engine e, possibly a hardware device.\n");
+#endif
 	BIO_printf(bio_err,  "-rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 	BIO_printf(bio_err,  "              load the file (or the files in the directory) into\n");
 	BIO_printf(bio_err,  "              the random number generator\n");
    	goto end;
    }

+#ifndef OPENSSL_NO_ENGINE
    e = setup_engine(bio_err, engine, 0);
+#endif

    if(passarg) {
 	if(export_cert) passargout = passarg;
@@ -543,14 +551,14 @@ int MAIN(int argc, char **argv)
 	    	BIO_printf (bio_err, "Can't read Password\n");
 	    	goto export_end;
        	}
-	if (!twopass) strcpy(macpass, pass);
+	if (!twopass) BUF_strlcpy(macpass, pass, sizeof macpass);

 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
 	CRYPTO_push_info("creating PKCS#12 structure");
 #endif

-	p12 = PKCS12_create(pass, name, key, ucert, certs,
+	p12 = PKCS12_create(cpass, name, key, ucert, certs,
 				key_pbe, cert_pbe, iter, -1, keytype);

 	if (!p12)
@@ -605,7 +613,7 @@ int MAIN(int argc, char **argv)
    CRYPTO_pop_info();
 #endif

-    if (!twopass) strcpy(macpass, pass);
+    if (!twopass) BUF_strlcpy(macpass, pass, sizeof macpass);

    if (options & INFO) BIO_printf (bio_err, "MAC Iteration %ld\n", p12->mac->iter ? ASN1_INTEGER_get (p12->mac->iter) : 1);
    if(macver) {
@@ -651,7 +659,7 @@ int MAIN(int argc, char **argv)
    if(passin) OPENSSL_free(passin);
    if(passout) OPENSSL_free(passout);
    apps_shutdown();
-    EXIT(ret);
+    OPENSSL_EXIT(ret);
 }

 int dump_certs_keys_p12 (BIO *out, PKCS12 *p12, char *pass,
@@ -803,11 +811,12 @@ err:
 int alg_print (BIO *x, X509_ALGOR *alg)
 {
 	PBEPARAM *pbe;
-	unsigned char *p;
+	const unsigned char *p;
 	p = alg->parameter->value.sequence->data;
 	pbe = d2i_PBEPARAM (NULL, &p, alg->parameter->value.sequence->length);
-	BIO_printf (bio_err, "%s, Iteration %d\n", 
-	OBJ_nid2ln(OBJ_obj2nid(alg->algorithm)), ASN1_INTEGER_get(pbe->iter));
+	BIO_printf (bio_err, "%s, Iteration %ld\n", 
+		OBJ_nid2ln(OBJ_obj2nid(alg->algorithm)),
+		ASN1_INTEGER_get(pbe->iter));
 	PBEPARAM_free (pbe);
 	return 0;
 }
--- a/apps/pkcs7.c
+++ b/apps/pkcs7.c
@@ -82,7 +82,9 @@ int MAIN(int, char **);

 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	PKCS7 *p7=NULL;
 	int i,badops=0;
 	BIO *in=NULL,*out=NULL;
@@ -90,7 +92,9 @@ int MAIN(int argc, char **argv)
 	char *infile,*outfile,*prog;
 	int print_certs=0,text=0,noout=0;
 	int ret=1;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif

 	apps_startup();

@@ -98,6 +102,9 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);

+	if (!load_config(bio_err, NULL))
+		goto end;
+
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -134,11 +141,13 @@ int MAIN(int argc, char **argv)
 			text=1;
 		else if (strcmp(*argv,"-print_certs") == 0)
 			print_certs=1;
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else
 			{
 			BIO_printf(bio_err,"unknown option %s\n",*argv);
@@ -161,14 +170,18 @@ bad:
 		BIO_printf(bio_err," -print_certs  print any certs or crl in the input\n");
 		BIO_printf(bio_err," -text         print full details of certificates\n");
 		BIO_printf(bio_err," -noout        don't output encoded data\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
+#endif
 		ret = 1;
 		goto end;
 		}

 	ERR_load_crypto_strings();

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 	in=BIO_new(BIO_s_file());
 	out=BIO_new(BIO_s_file());
@@ -301,5 +314,5 @@ end:
 	if (in != NULL) BIO_free(in);
 	if (out != NULL) BIO_free_all(out);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
--- a/apps/pkcs8.c
+++ b/apps/pkcs8.c
@@ -85,7 +85,9 @@ int MAIN(int argc, char **argv)
 	EVP_PKEY *pkey=NULL;
 	char pass[50], *passin = NULL, *passout = NULL, *p8pass = NULL;
 	int badarg = 0;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif

 	if (bio_err == NULL) bio_err = BIO_new_fp (stderr, BIO_NOCLOSE);

@@ -145,11 +147,13 @@ int MAIN(int argc, char **argv)
 			if (!args[1]) goto bad;
 			passargout= *(++args);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*args,"-engine") == 0)
 			{
 			if (!args[1]) goto bad;
 			engine= *(++args);
 			}
+#endif
 		else if (!strcmp (*args, "-in")) {
 			if (args[1]) {
 				args++;
@@ -182,11 +186,15 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err, "-nocrypt        use or expect unencrypted private key\n");
 		BIO_printf(bio_err, "-v2 alg         use PKCS#5 v2.0 and cipher \"alg\"\n");
 		BIO_printf(bio_err, "-v1 obj         use PKCS#5 v1.5 and cipher \"alg\"\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
+#endif
 		return (1);
 	}

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
 		BIO_printf(bio_err, "Error getting passwords\n");
@@ -224,11 +232,14 @@ int MAIN(int argc, char **argv)
 		pkey = load_key(bio_err, infile, informat, 1,
 			passin, e, "key");
 		if (!pkey) {
+			BIO_free_all(out);
 			return (1);
 		}
 		if (!(p8inf = EVP_PKEY2PKCS8_broken(pkey, p8_broken))) {
-			BIO_printf(bio_err, "Error converting key\n", outfile);
+			BIO_printf(bio_err, "Error converting key\n");
 			ERR_print_errors(bio_err);
+			EVP_PKEY_free(pkey);
+			BIO_free_all(out);
 			return (1);
 		}
 		if(nocrypt) {
@@ -238,6 +249,9 @@ int MAIN(int argc, char **argv)
 				i2d_PKCS8_PRIV_KEY_INFO_bio(out, p8inf);
 			else {
 				BIO_printf(bio_err, "Bad format specified for key\n");
+				PKCS8_PRIV_KEY_INFO_free(p8inf);
+				EVP_PKEY_free(pkey);
+				BIO_free_all(out);
 				return (1);
 			}
 		} else {
@@ -245,15 +259,22 @@ int MAIN(int argc, char **argv)
 			else {
 				p8pass = pass;
 				if (EVP_read_pw_string(pass, sizeof pass, "Enter Encryption Password:", 1))
+				{
+					PKCS8_PRIV_KEY_INFO_free(p8inf);
+					EVP_PKEY_free(pkey);
+					BIO_free_all(out);
 					return (1);
 				}
+			}
 			app_RAND_load_file(NULL, bio_err, 0);
 			if (!(p8 = PKCS8_encrypt(pbe_nid, cipher,
 					p8pass, strlen(p8pass),
 					NULL, 0, iter, p8inf))) {
-				BIO_printf(bio_err, "Error encrypting key\n",
-								 outfile);
+				BIO_printf(bio_err, "Error encrypting key\n");
 				ERR_print_errors(bio_err);
+				PKCS8_PRIV_KEY_INFO_free(p8inf);
+				EVP_PKEY_free(pkey);
+				BIO_free_all(out);
 				return (1);
 			}
 			app_RAND_write_file(NULL, bio_err);
@@ -263,6 +284,9 @@ int MAIN(int argc, char **argv)
 				i2d_PKCS8_bio(out, p8);
 			else {
 				BIO_printf(bio_err, "Bad format specified for key\n");
+				PKCS8_PRIV_KEY_INFO_free(p8inf);
+				EVP_PKEY_free(pkey);
+				BIO_free_all(out);
 				return (1);
 			}
 			X509_SIG_free(p8);
@@ -295,7 +319,7 @@ int MAIN(int argc, char **argv)
 		}

 		if (!p8) {
-			BIO_printf (bio_err, "Error reading key\n", outfile);
+			BIO_printf (bio_err, "Error reading key\n");
 			ERR_print_errors(bio_err);
 			return (1);
 		}
@@ -309,13 +333,13 @@ int MAIN(int argc, char **argv)
 	}

 	if (!p8inf) {
-		BIO_printf(bio_err, "Error decrypting key\n", outfile);
+		BIO_printf(bio_err, "Error decrypting key\n");
 		ERR_print_errors(bio_err);
 		return (1);
 	}

 	if (!(pkey = EVP_PKCS82PKEY(p8inf))) {
-		BIO_printf(bio_err, "Error converting key\n", outfile);
+		BIO_printf(bio_err, "Error converting key\n");
 		ERR_print_errors(bio_err);
 		return (1);
 	}
--- a/apps/progs.h
+++ b/apps/progs.h
@@ -37,7 +37,9 @@ extern int pkcs8_main(int argc,char *argv[]);
 extern int spkac_main(int argc,char *argv[]);
 extern int smime_main(int argc,char *argv[]);
 extern int rand_main(int argc,char *argv[]);
+#ifndef OPENSSL_NO_ENGINE
 extern int engine_main(int argc,char *argv[]);
+#endif
 extern int ocsp_main(int argc,char *argv[]);

 #define FUNC_TYPE_GENERAL	1
@@ -100,7 +102,9 @@ FUNCTION functions[] = {
 #if !defined(OPENSSL_NO_SOCK) && !(defined(OPENSSL_NO_SSL2) && defined(OPENSSL_NO_SSL3))
 	{FUNC_TYPE_GENERAL,"s_client",s_client_main},
 #endif
+#ifndef OPENSSL_NO_SPEED
 	{FUNC_TYPE_GENERAL,"speed",speed_main},
+#endif
 #if !defined(OPENSSL_NO_SOCK) && !(defined(OPENSSL_NO_SSL2) && defined(OPENSSL_NO_SSL3))
 	{FUNC_TYPE_GENERAL,"s_time",s_time_main},
 #endif
@@ -119,7 +123,9 @@ FUNCTION functions[] = {
 	{FUNC_TYPE_GENERAL,"spkac",spkac_main},
 	{FUNC_TYPE_GENERAL,"smime",smime_main},
 	{FUNC_TYPE_GENERAL,"rand",rand_main},
+#ifndef OPENSSL_NO_ENGINE
 	{FUNC_TYPE_GENERAL,"engine",engine_main},
+#endif
 	{FUNC_TYPE_GENERAL,"ocsp",ocsp_main},
 #ifndef OPENSSL_NO_MD2
 	{FUNC_TYPE_MD,"md2",dgst_main},
--- a/apps/rand.c
+++ b/apps/rand.c
@@ -76,7 +76,9 @@ int MAIN(int, char **);

 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	int i, r, ret = 1;
 	int badopt;
 	char *outfile = NULL;
@@ -84,7 +86,9 @@ int MAIN(int argc, char **argv)
 	int base64 = 0;
 	BIO *out = NULL;
 	int num = -1;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif

 	apps_startup();

@@ -106,6 +110,7 @@ int MAIN(int argc, char **argv)
 			else
 				badopt = 1;
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(argv[i], "-engine") == 0)
 			{
 			if ((argv[i+1] != NULL) && (engine == NULL))
@@ -113,6 +118,7 @@ int MAIN(int argc, char **argv)
 			else
 				badopt = 1;
 			}
+#endif
 		else if (strcmp(argv[i], "-rand") == 0)
 			{
 			if ((argv[i+1] != NULL) && (inrand == NULL))
@@ -150,13 +156,17 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err, "Usage: rand [options] num\n");
 		BIO_printf(bio_err, "where options are\n");
 		BIO_printf(bio_err, "-out file             - write to file\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err, "-engine e             - use engine e, possibly a hardware device.\n");
+#endif
 		BIO_printf(bio_err, "-rand file%cfile%c... - seed PRNG from files\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err, "-base64               - encode output\n");
 		goto err;
 		}

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 	app_RAND_load_file(NULL, bio_err, (inrand != NULL));
 	if (inrand != NULL)
@@ -195,7 +205,7 @@ int MAIN(int argc, char **argv)
 		int chunk;

 		chunk = num;
-		if (chunk > sizeof buf)
+		if (chunk > (int)sizeof(buf))
 			chunk = sizeof buf;
 		r = RAND_bytes(buf, chunk);
 		if (r <= 0)
@@ -213,5 +223,5 @@ err:
 	if (out)
 		BIO_free_all(out);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
--- a/apps/req.c
+++ b/apps/req.c
@@ -56,6 +56,12 @@
 * [including the GNU Public Licence.]
 */

+/* Until the key-gen callbacks are modified to use newer prototypes, we allow
+ * deprecated functions for openssl-internal code */
+#ifdef OPENSSL_NO_DEPRECATED
+#undef OPENSSL_NO_DEPRECATED
+#endif
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <time.h>
@@ -113,9 +119,10 @@
 *		  require.  This format is wrong
 */

-static int make_REQ(X509_REQ *req,EVP_PKEY *pkey,char *dn,int attribs,
-		unsigned long chtype);
-static int build_subject(X509_REQ *req, char *subj, unsigned long chtype);
+static int make_REQ(X509_REQ *req,EVP_PKEY *pkey,char *dn,int mutlirdn,
+		int attribs,unsigned long chtype);
+static int build_subject(X509_REQ *req, char *subj, unsigned long chtype,
+		int multirdn);
 static int prompt_info(X509_REQ *req,
 		STACK_OF(CONF_VALUE) *dn_sk, char *dn_sect,
 		STACK_OF(CONF_VALUE) *attr_sk, char *attr_sect, int attribs,
@@ -127,15 +134,14 @@ static int add_attribute_object(X509_REQ *req, char *text,
 				char *def, char *value, int nid, int n_min,
 				int n_max, unsigned long chtype);
 static int add_DN_object(X509_NAME *n, char *text, char *def, char *value,
-	int nid,int n_min,int n_max, unsigned long chtype);
+	int nid,int n_min,int n_max, unsigned long chtype, int mval);
 #ifndef OPENSSL_NO_RSA
-static void MS_CALLBACK req_cb(int p,int n,void *arg);
+static int MS_CALLBACK req_cb(int p, int n, BN_GENCB *cb);
 #endif
 static int req_check_len(int len,int n_min,int n_max);
 static int check_end(char *str, char *end);
 #ifndef MONOLITH
 static char *default_config_file=NULL;
-static CONF *config=NULL;
 #endif
 static CONF *req_conf=NULL;
 static int batch=0;
@@ -167,7 +173,9 @@ int MAIN(int argc, char **argv)
 	int informat,outformat,verify=0,noout=0,text=0,keyform=FORMAT_PEM;
 	int nodes=0,kludge=0,newhdr=0,subject=0,pubkey=0;
 	char *infile,*outfile,*prog,*keyfile=NULL,*template=NULL,*keyout=NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
 	char *extensions = NULL;
 	char *req_exts = NULL;
 	const EVP_CIPHER *cipher=NULL;
@@ -178,6 +186,7 @@ int MAIN(int argc, char **argv)
 	char *passin = NULL, *passout = NULL;
 	char *p;
 	char *subj = NULL;
+	int multirdn = 0;
 	const EVP_MD *md_alg=NULL,*digest=EVP_md5();
 	unsigned long chtype = MBSTRING_ASC;
 #ifndef MONOLITH
@@ -215,11 +224,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outformat=str2fmt(*(++argv));
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-key") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -431,6 +442,8 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			subj= *(++argv);
 			}
+		else if (strcmp(*argv,"-multivalue-rdn") == 0)
+			multirdn=1;
 		else if (strcmp(*argv,"-days") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -483,7 +496,9 @@ bad:
 		BIO_printf(bio_err," -verify        verify signature on REQ\n");
 		BIO_printf(bio_err," -modulus       RSA modulus\n");
 		BIO_printf(bio_err," -nodes         don't encrypt the output key\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e      use engine e, possibly a hardware device\n");
+#endif
 		BIO_printf(bio_err," -subject       output the request's subject\n");
 		BIO_printf(bio_err," -passin        private key password source\n");
 		BIO_printf(bio_err," -key file      use the private key contained in file\n");
@@ -500,6 +515,7 @@ bad:
 		BIO_printf(bio_err," -[digest]      Digest to sign with (md5, sha1, md2, mdc2, md4)\n");
 		BIO_printf(bio_err," -config file   request template file.\n");
 		BIO_printf(bio_err," -subj arg      set or modify request subject\n");
+		BIO_printf(bio_err," -multivalue-rdn enable support for multivalued RDNs\n");
 		BIO_printf(bio_err," -new           new request.\n");
 		BIO_printf(bio_err," -batch         do not ask anything during request generation\n");
 		BIO_printf(bio_err," -x509          output a x509 structure instead of a cert. req.\n");
@@ -675,7 +691,9 @@ bad:
 	if ((in == NULL) || (out == NULL))
 		goto end;

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 	if (keyfile != NULL)
 		{
@@ -699,6 +717,7 @@ bad:

 	if (newreq && (pkey == NULL))
 		{
+		BN_GENCB cb;
 		char *randfile = NCONF_get_string(req_conf,SECTION,"RANDFILE");
 		if (randfile == NULL)
 			ERR_clear_error();
@@ -715,23 +734,27 @@ bad:
 		if (newkey < MIN_KEY_LENGTH && (pkey_type == TYPE_RSA || pkey_type == TYPE_DSA))
 			{
 			BIO_printf(bio_err,"private key length is too short,\n");
-			BIO_printf(bio_err,"it needs to be at least %d bits, not %d\n",MIN_KEY_LENGTH,newkey);
+			BIO_printf(bio_err,"it needs to be at least %d bits, not %ld\n",MIN_KEY_LENGTH,newkey);
 			goto end;
 			}
-		BIO_printf(bio_err,"Generating a %d bit %s private key\n",
+		BIO_printf(bio_err,"Generating a %ld bit %s private key\n",
 			newkey,(pkey_type == TYPE_RSA)?"RSA":
 			(pkey_type == TYPE_DSA)?"DSA":"EC");

 		if ((pkey=EVP_PKEY_new()) == NULL) goto end;

 #ifndef OPENSSL_NO_RSA
+		BN_GENCB_set(&cb, req_cb, bio_err);
 		if (pkey_type == TYPE_RSA)
 			{
-			if (!EVP_PKEY_assign_RSA(pkey,
-				RSA_generate_key(newkey,0x10001,
-					req_cb,bio_err)))
+			RSA *rsa = RSA_new();
+			if(!rsa || !RSA_generate_key_ex(rsa, newkey, 0x10001, &cb) ||
+					!EVP_PKEY_assign_RSA(pkey, rsa))
+				{
+				if(rsa) RSA_free(rsa);
 				goto end;
 				}
+			}
 		else
 #endif
 #ifndef OPENSSL_NO_DSA
@@ -869,7 +892,7 @@ loop:
 				goto end;
 				}

-			i=make_REQ(req,pkey,subj,!x509, chtype);
+			i=make_REQ(req,pkey,subj,multirdn,!x509, chtype);
 			subj=NULL; /* done processing '-subj' option */
 			if ((kludge > 0) && !sk_X509_ATTRIBUTE_num(req->req_info->attributes))
 				{
@@ -889,7 +912,7 @@ loop:
 			if ((x509ss=X509_new()) == NULL) goto end;

 			/* Set version to V3 */
-			if(!X509_set_version(x509ss, 2)) goto end;
+			if(extensions && !X509_set_version(x509ss, 2)) goto end;
 			if (serial)
 				{
 				if (!X509_set_serialNumber(x509ss, serial)) goto end;
@@ -962,7 +985,7 @@ loop:
 			print_name(bio_err, "old subject=", X509_REQ_get_subject_name(req), nmflag);
 			}

-		if (build_subject(req, subj, chtype) == 0)
+		if (build_subject(req, subj, chtype, multirdn) == 0)
 			{
 			BIO_printf(bio_err, "ERROR: cannot modify subject\n");
 			ex=1;
@@ -1150,11 +1173,11 @@ end:
 	if (ec_params != NULL) EC_KEY_free(ec_params);
 #endif
 	apps_shutdown();
-	EXIT(ex);
+	OPENSSL_EXIT(ex);
 	}

-static int make_REQ(X509_REQ *req, EVP_PKEY *pkey, char *subj, int attribs,
-			unsigned long chtype)
+static int make_REQ(X509_REQ *req, EVP_PKEY *pkey, char *subj, int multirdn,
+			int attribs, unsigned long chtype)
 	{
 	int ret=0,i;
 	char no_prompt = 0;
@@ -1204,7 +1227,7 @@ static int make_REQ(X509_REQ *req, EVP_PKEY *pkey, char *subj, int attribs,
 	else 
 		{
 		if (subj)
-			i = build_subject(req, subj, chtype);
+			i = build_subject(req, subj, chtype, multirdn);
 		else
 			i = prompt_info(req, dn_sk, dn_sect, attr_sk, attr_sect, attribs, chtype);
 		}
@@ -1221,11 +1244,11 @@ err:
 * subject is expected to be in the format /type0=value0/type1=value1/type2=...
 * where characters may be escaped by \
 */
-static int build_subject(X509_REQ *req, char *subject, unsigned long chtype)
+static int build_subject(X509_REQ *req, char *subject, unsigned long chtype, int multirdn)
 	{
 	X509_NAME *n;

-	if (!(n = do_subject(subject, chtype)))
+	if (!(n = parse_name(subject, chtype, multirdn)))
 		return 0;

 	if (!X509_REQ_set_subject_name(req, n))
@@ -1246,7 +1269,7 @@ static int prompt_info(X509_REQ *req,
 	int i;
 	char *p,*q;
 	char buf[100];
-	int nid;
+	int nid, mval;
 	long n_min,n_max;
 	char *type,*def,*value;
 	CONF_VALUE *v;
@@ -1289,38 +1312,51 @@ start:		for (;;)
 					if(*p) type = p;
 					break;
 				}
+			if (*type == '+')
+				{
+				mval = -1;
+				type++;
+				}
+			else
+				mval = 0;
 			/* If OBJ not recognised ignore it */
 			if ((nid=OBJ_txt2nid(type)) == NID_undef) goto start;
-
-			if(strlen(v->name) > sizeof buf-9)
+			if (BIO_snprintf(buf,sizeof buf,"%s_default",v->name)
+				>= (int)sizeof(buf))
 			   {
 			   BIO_printf(bio_err,"Name '%s' too long\n",v->name);
 			   return 0;
 			   }

-			sprintf(buf,"%s_default",v->name);
 			if ((def=NCONF_get_string(req_conf,dn_sect,buf)) == NULL)
 				{
 				ERR_clear_error();
 				def="";
 				}
-			sprintf(buf,"%s_value",v->name);
+				
+			BIO_snprintf(buf,sizeof buf,"%s_value",v->name);
 			if ((value=NCONF_get_string(req_conf,dn_sect,buf)) == NULL)
 				{
 				ERR_clear_error();
 				value=NULL;
 				}

-			sprintf(buf,"%s_min",v->name);
+			BIO_snprintf(buf,sizeof buf,"%s_min",v->name);
 			if (!NCONF_get_number(req_conf,dn_sect,buf, &n_min))
+				{
+				ERR_clear_error();
 				n_min = -1;
+				}

-			sprintf(buf,"%s_max",v->name);
+			BIO_snprintf(buf,sizeof buf,"%s_max",v->name);
 			if (!NCONF_get_number(req_conf,dn_sect,buf, &n_max))
+				{
+				ERR_clear_error();
 				n_max = -1;
+				}

 			if (!add_DN_object(subj,v->value,def,value,nid,
-				n_min,n_max, chtype))
+				n_min,n_max, chtype, mval))
 				return 0;
 			}
 		if (X509_NAME_entry_count(subj) == 0)
@@ -1350,13 +1386,13 @@ start2:			for (;;)
 				if ((nid=OBJ_txt2nid(type)) == NID_undef)
 					goto start2;

-				if(strlen(v->name) > sizeof buf-9)
+				if (BIO_snprintf(buf,sizeof buf,"%s_default",type)
+					>= (int)sizeof(buf))
 				   {
 				   BIO_printf(bio_err,"Name '%s' too long\n",v->name);
 				   return 0;
 				   }

-				sprintf(buf,"%s_default",type);
 				if ((def=NCONF_get_string(req_conf,attr_sect,buf))
 					== NULL)
 					{
@@ -1365,7 +1401,7 @@ start2:			for (;;)
 					}
 				
 				
-				sprintf(buf,"%s_value",type);
+				BIO_snprintf(buf,sizeof buf,"%s_value",type);
 				if ((value=NCONF_get_string(req_conf,attr_sect,buf))
 					== NULL)
 					{
@@ -1373,11 +1409,11 @@ start2:			for (;;)
 					value=NULL;
 					}

-				sprintf(buf,"%s_min",type);
+				BIO_snprintf(buf,sizeof buf,"%s_min",type);
 				if (!NCONF_get_number(req_conf,attr_sect,buf, &n_min))
 					n_min = -1;

-				sprintf(buf,"%s_max",type);
+				BIO_snprintf(buf,sizeof buf,"%s_max",type);
 				if (!NCONF_get_number(req_conf,attr_sect,buf, &n_max))
 					n_max = -1;

@@ -1410,6 +1446,7 @@ static int auto_info(X509_REQ *req, STACK_OF(CONF_VALUE) *dn_sk,

 	for (i = 0; i < sk_CONF_VALUE_num(dn_sk); i++)
 		{
+		int mval;
 		v=sk_CONF_VALUE_value(dn_sk,i);
 		p=q=NULL;
 		type=v->name;
@@ -1426,8 +1463,19 @@ static int auto_info(X509_REQ *req, STACK_OF(CONF_VALUE) *dn_sk,
 				if(*p) type = p;
 				break;
 			}
+#ifndef CHARSET_EBCDIC
+		if (*p == '+')
+#else
+		if (*p == os_toascii['+'])
+#endif
+			{
+			p++;
+			mval = -1;
+			}
+		else
+			mval = 0;
 		if (!X509_NAME_add_entry_by_txt(subj,type, chtype,
-				(unsigned char *) v->value,-1,-1,0)) return 0;
+				(unsigned char *) v->value,-1,-1,mval)) return 0;

 		}

@@ -1450,7 +1498,7 @@ static int auto_info(X509_REQ *req, STACK_OF(CONF_VALUE) *dn_sk,


 static int add_DN_object(X509_NAME *n, char *text, char *def, char *value,
-	     int nid, int n_min, int n_max, unsigned long chtype)
+	     int nid, int n_min, int n_max, unsigned long chtype, int mval)
 	{
 	int i,ret=0;
 	MS_STATIC char buf[1024];
@@ -1459,9 +1507,8 @@ start:
 	(void)BIO_flush(bio_err);
 	if(value != NULL)
 		{
-		OPENSSL_assert(strlen(value) < sizeof buf-2);
-		strcpy(buf,value);
-		strcat(buf,"\n");
+		BUF_strlcpy(buf,value,sizeof buf);
+		BUF_strlcat(buf,"\n",sizeof buf);
 		BIO_printf(bio_err,"%s\n",value);
 		}
 	else
@@ -1483,8 +1530,8 @@ start:
 		{
 		if ((def == NULL) || (def[0] == '\0'))
 			return(1);
-		strcpy(buf,def);
-		strcat(buf,"\n");
+		BUF_strlcpy(buf,def,sizeof buf);
+		BUF_strlcat(buf,"\n",sizeof buf);
 		}
 	else if ((buf[0] == '.') && (buf[1] == '\n')) return(1);

@@ -1500,7 +1547,7 @@ start:
 #endif
 	if(!req_check_len(i, n_min, n_max)) goto start;
 	if (!X509_NAME_add_entry_by_NID(n,nid, chtype,
-				(unsigned char *) buf, -1,-1,0)) goto err;
+				(unsigned char *) buf, -1,-1,mval)) goto err;
 	ret=1;
 err:
 	return(ret);
@@ -1518,9 +1565,8 @@ start:
 	(void)BIO_flush(bio_err);
 	if (value != NULL)
 		{
-		OPENSSL_assert(strlen(value) < sizeof buf-2);
-		strcpy(buf,value);
-		strcat(buf,"\n");
+		BUF_strlcpy(buf,value,sizeof buf);
+		BUF_strlcat(buf,"\n",sizeof buf);
 		BIO_printf(bio_err,"%s\n",value);
 		}
 	else
@@ -1542,8 +1588,8 @@ start:
 		{
 		if ((def == NULL) || (def[0] == '\0'))
 			return(1);
-		strcpy(buf,def);
-		strcat(buf,"\n");
+		BUF_strlcpy(buf,def,sizeof buf);
+		BUF_strlcat(buf,"\n",sizeof buf);
 		}
 	else if ((buf[0] == '.') && (buf[1] == '\n')) return(1);

@@ -1572,7 +1618,7 @@ err:
 	}

 #ifndef OPENSSL_NO_RSA
-static void MS_CALLBACK req_cb(int p, int n, void *arg)
+static int MS_CALLBACK req_cb(int p, int n, BN_GENCB *cb)
 	{
 	char c='*';

@@ -1580,11 +1626,12 @@ static void MS_CALLBACK req_cb(int p, int n, void *arg)
 	if (p == 1) c='+';
 	if (p == 2) c='*';
 	if (p == 3) c='\n';
-	BIO_write((BIO *)arg,&c,1);
-	(void)BIO_flush((BIO *)arg);
+	BIO_write(cb->arg,&c,1);
+	(void)BIO_flush(cb->arg);
 #ifdef LINT
 	p=n;
 #endif
+	return 1;
 	}
 #endif

--- a/apps/rsa.c
+++ b/apps/rsa.c
@@ -104,7 +104,9 @@ int MAIN(int argc, char **argv)
 	char *infile,*outfile,*prog;
 	char *passargin = NULL, *passargout = NULL;
 	char *passin = NULL, *passout = NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
 	int modulus=0;

 	apps_startup();
@@ -156,11 +158,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passargout= *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-sgckey") == 0)
 			sgckey=1;
 		else if (strcmp(*argv,"-pubin") == 0)
@@ -212,13 +216,17 @@ bad:
 		BIO_printf(bio_err," -check          verify key consistency\n");
 		BIO_printf(bio_err," -pubin          expect a public key in input file\n");
 		BIO_printf(bio_err," -pubout         output a public key\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
+#endif
 		goto end;
 		}

 	ERR_load_crypto_strings();

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
 		BIO_printf(bio_err, "Error getting passwords\n");
@@ -369,7 +377,7 @@ end:
 	if(passin) OPENSSL_free(passin);
 	if(passout) OPENSSL_free(passout);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 #else /* !OPENSSL_NO_RSA */

--- a/apps/rsautl.c
+++ b/apps/rsautl.c
@@ -85,7 +85,9 @@ int MAIN(int argc, char **argv)
 	ENGINE *e = NULL;
 	BIO *in = NULL, *out = NULL;
 	char *infile = NULL, *outfile = NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine = NULL;
+#endif
 	char *keyfile = NULL;
 	char rsa_mode = RSA_VERIFY, key_type = KEY_PRIVKEY;
 	int keyform = FORMAT_PEM;
@@ -95,6 +97,7 @@ int MAIN(int argc, char **argv)
 	EVP_PKEY *pkey = NULL;
 	RSA *rsa = NULL;
 	unsigned char *rsa_in = NULL, *rsa_out = NULL, pad;
+	char *passargin = NULL, *passin = NULL;
 	int rsa_inlen, rsa_outlen = 0;
 	int keysize;

@@ -122,12 +125,17 @@ int MAIN(int argc, char **argv)
 		} else if(!strcmp(*argv, "-inkey")) {
 			if (--argc < 1) badarg = 1;
 			keyfile = *(++argv);
+		} else if (!strcmp(*argv,"-passin")) {
+			if (--argc < 1) badarg = 1;
+			passargin= *(++argv);
 		} else if (strcmp(*argv,"-keyform") == 0) {
 			if (--argc < 1) badarg = 1;
 			keyform=str2fmt(*(++argv));
+#ifndef OPENSSL_NO_ENGINE
 		} else if(!strcmp(*argv, "-engine")) {
 			if (--argc < 1) badarg = 1;
 			engine = *(++argv);
+#endif
 		} else if(!strcmp(*argv, "-pubin")) {
 			key_type = KEY_PUBKEY;
 		} else if(!strcmp(*argv, "-certin")) {
@@ -162,7 +170,13 @@ int MAIN(int argc, char **argv)
 		goto end;
 	}

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif
+	if(!app_passwd(bio_err, passargin, NULL, &passin, NULL)) {
+		BIO_printf(bio_err, "Error getting password\n");
+		goto end;
+	}

 /* FIXME: seed PRNG only if needed */
 	app_RAND_load_file(NULL, bio_err, 0);
@@ -170,7 +184,7 @@ int MAIN(int argc, char **argv)
 	switch(key_type) {
 		case KEY_PRIVKEY:
 		pkey = load_key(bio_err, keyfile, keyform, 0,
-			NULL, e, "Private Key");
+			passin, e, "Private Key");
 		break;

 		case KEY_PUBKEY:
@@ -284,6 +298,7 @@ int MAIN(int argc, char **argv)
 	BIO_free_all(out);
 	if(rsa_in) OPENSSL_free(rsa_in);
 	if(rsa_out) OPENSSL_free(rsa_out);
+	if(passin) OPENSSL_free(passin);
 	return ret;
 }

@@ -305,7 +320,10 @@ static void usage()
 	BIO_printf(bio_err, "-encrypt        encrypt with public key\n");
 	BIO_printf(bio_err, "-decrypt        decrypt with private key\n");
 	BIO_printf(bio_err, "-hexdump        hex dump output\n");
+#ifndef OPENSSL_NO_ENGINE
 	BIO_printf(bio_err, "-engine e       use engine e, possibly a hardware device.\n");
+	BIO_printf (bio_err, "-passin arg    pass phrase source\n");
+#endif

 }

--- a/apps/s_apps.h
+++ b/apps/s_apps.h
@@ -108,10 +108,19 @@
 * Hudson (tjh@cryptsoft.com).
 *
 */
-
+#if !defined(OPENSSL_SYS_NETWARE)  /* conflicts with winsock2 stuff on netware */
 #include <sys/types.h>
+#endif
 #include <openssl/opensslconf.h>

+#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
+#include <conio.h>
+#endif
+
+#ifdef OPENSSL_SYS_MSDOS
+#define _kbhit kbhit
+#endif
+
 #if defined(OPENSSL_SYS_VMS) && !defined(FD_SET)
 /* VAX C does not defined fd_set and friends, but it's actually quite simple */
 /* These definitions are borrowed from SOCKETSHR.	/Richard Levitte */
--- a/apps/s_cb.c
+++ b/apps/s_cb.c
@@ -239,15 +239,15 @@ long MS_CALLBACK bio_dump_cb(BIO *bio, int cmd, const char *argp, int argi,

 	if (cmd == (BIO_CB_READ|BIO_CB_RETURN))
 		{
-		BIO_printf(out,"read from %08X [%08lX] (%d bytes => %ld (0x%X))\n",
-			bio,argp,argi,ret,ret);
+		BIO_printf(out,"read from %p [%p] (%d bytes => %ld (0x%lX))\n",
+ 			(void *)bio,argp,argi,ret,ret);
 		BIO_dump(out,argp,(int)ret);
 		return(ret);
 		}
 	else if (cmd == (BIO_CB_WRITE|BIO_CB_RETURN))
 		{
-		BIO_printf(out,"write to %08X [%08lX] (%d bytes => %ld (0x%X))\n",
-			bio,argp,argi,ret,ret);
+		BIO_printf(out,"write to %p [%p] (%d bytes => %ld (0x%lX))\n",
+			(void *)bio,argp,argi,ret,ret);
 		BIO_dump(out,argp,(int)ret);
 		}
 	return(ret);
--- a/apps/s_client.c
+++ b/apps/s_client.c
@@ -136,10 +136,6 @@ typedef unsigned int u_int;
 #include <openssl/rand.h>
 #include "s_apps.h"

-#ifdef OPENSSL_SYS_WINDOWS
-#include <conio.h>
-#endif
-
 #ifdef OPENSSL_SYS_WINCE
 /* Windows CE incorrectly defines fileno as returning void*, so to avoid problems below... */
 #ifdef fileno
@@ -221,8 +217,10 @@ static void sc_usage(void)
 	BIO_printf(bio_err," -starttls prot - use the STARTTLS command before starting TLS\n");
 	BIO_printf(bio_err,"                 for those protocols that support it, where\n");
 	BIO_printf(bio_err,"                 'prot' defines which one to assume.  Currently,\n");
-	BIO_printf(bio_err,"                 only \"smtp\" is supported.\n");
+	BIO_printf(bio_err,"                 only \"smtp\" and \"pop3\" are supported.\n");
+#ifndef OPENSSL_NO_ENGINE
 	BIO_printf(bio_err," -engine id    - Initialise and use the specified engine\n");
+#endif
 	BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);

 	}
@@ -249,14 +247,16 @@ int MAIN(int argc, char **argv)
 	int write_tty,read_tty,write_ssl,read_ssl,tty_on,ssl_pending;
 	SSL_CTX *ctx=NULL;
 	int ret=1,in_init=1,i,nbio_test=0;
-	int smtp_starttls = 0;
+	int starttls_proto = 0;
 	int prexit = 0, vflags = 0;
 	SSL_METHOD *meth=NULL;
 	BIO *sbio;
 	char *inrand=NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine_id=NULL;
 	ENGINE *e=NULL;
-#ifdef OPENSSL_SYS_WINDOWS
+#endif
+#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE)
 	struct timeval tv;
 #endif

@@ -411,15 +411,19 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			++argv;
 			if (strcmp(*argv,"smtp") == 0)
-				smtp_starttls = 1;
+				starttls_proto = 1;
+			else if (strcmp(*argv,"pop3") == 0)
+				starttls_proto = 2;
 			else
 				goto bad;
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if	(strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine_id = *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -444,7 +448,9 @@ bad:
 	OpenSSL_add_ssl_algorithms();
 	SSL_load_error_strings();

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine_id, 1);
+#endif

 	if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL
 		&& !RAND_status())
@@ -579,12 +585,18 @@ re_start:
 	sbuf_off=0;

 	/* This is an ugly hack that does a lot of assumptions */
-	if (smtp_starttls)
+	if (starttls_proto == 1)
 		{
 		BIO_read(sbio,mbuf,BUFSIZZ);
 		BIO_printf(sbio,"STARTTLS\r\n");
 		BIO_read(sbio,sbuf,BUFSIZZ);
 		}
+	if (starttls_proto == 2)
+		{
+		BIO_read(sbio,mbuf,BUFSIZZ);
+		BIO_printf(sbio,"STLS\r\n");
+		BIO_read(sbio,sbuf,BUFSIZZ);
+		}

 	for (;;)
 		{
@@ -605,11 +617,11 @@ re_start:
 				print_stuff(bio_c_out,con,full_log);
 				if (full_log > 0) full_log--;

-				if (smtp_starttls)
+				if (starttls_proto)
 					{
 					BIO_printf(bio_err,"%s",mbuf);
 					/* We don't need to know any more */
-					smtp_starttls = 0;
+					starttls_proto = 0;
 					}

 				if (reconnect)
@@ -628,7 +640,7 @@ re_start:

 		if (!ssl_pending)
 			{
-#ifndef OPENSSL_SYS_WINDOWS
+#if !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_NETWARE)
 			if (tty_on)
 				{
 				if (read_tty)  FD_SET(fileno(stdin),&readfds);
@@ -655,8 +667,8 @@ re_start:
 			 * will choke the compiler: if you do have a cast then
 			 * you can either go for (int *) or (void *).
 			 */
-#ifdef OPENSSL_SYS_WINDOWS
-			/* Under Windows we make the assumption that we can
+#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
+                        /* Under Windows/DOS we make the assumption that we can
 			 * always write to the tty: therefore if we need to
 			 * write to the tty we just fall through. Otherwise
 			 * we timeout the select every second and see if there
@@ -670,7 +682,7 @@ re_start:
 					tv.tv_usec = 0;
 					i=select(width,(void *)&readfds,(void *)&writefds,
 						 NULL,&tv);
-#ifdef OPENSSL_SYS_WINCE
+#if defined(OPENSSL_SYS_WINCE) || defined(OPENSSL_SYS_MSDOS)
 					if(!i && (!_kbhit() || !read_tty) ) continue;
 #else
 					if(!i && (!((_kbhit()) || (WAIT_OBJECT_0 == WaitForSingleObject(GetStdHandle(STD_INPUT_HANDLE), 0))) || !read_tty) ) continue;
@@ -758,7 +770,7 @@ re_start:
 				goto shut;
 				}
 			}
-#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
+#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE)
 		/* Assume Windows/DOS can always write */
 		else if (!ssl_pending && write_tty)
 #else
@@ -839,12 +851,14 @@ printf("read=%d pending=%d peek=%d\n",k,SSL_pending(con),SSL_peek(con,zbuf,10240
 				}
 			}

-#ifdef OPENSSL_SYS_WINDOWS
-#ifdef OPENSSL_SYS_WINCE
+#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
+#if defined(OPENSSL_SYS_WINCE) || defined(OPENSSL_SYS_MSDOS)
 		else if (_kbhit())
 #else
 		else if ((_kbhit()) || (WAIT_OBJECT_0 == WaitForSingleObject(GetStdHandle(STD_INPUT_HANDLE), 0)))
 #endif
+#elif defined (OPENSSL_SYS_NETWARE)
+        else if (_kbhit())
 #else
 		else if (FD_ISSET(fileno(stdin),&readfds))
 #endif
@@ -908,16 +922,16 @@ end:
 	if (con != NULL) SSL_free(con);
 	if (con2 != NULL) SSL_free(con2);
 	if (ctx != NULL) SSL_CTX_free(ctx);
-	if (cbuf != NULL) { memset(cbuf,0,BUFSIZZ); OPENSSL_free(cbuf); }
-	if (sbuf != NULL) { memset(sbuf,0,BUFSIZZ); OPENSSL_free(sbuf); }
-	if (mbuf != NULL) { memset(mbuf,0,BUFSIZZ); OPENSSL_free(mbuf); }
+	if (cbuf != NULL) { OPENSSL_cleanse(cbuf,BUFSIZZ); OPENSSL_free(cbuf); }
+	if (sbuf != NULL) { OPENSSL_cleanse(sbuf,BUFSIZZ); OPENSSL_free(sbuf); }
+	if (mbuf != NULL) { OPENSSL_cleanse(mbuf,BUFSIZZ); OPENSSL_free(mbuf); }
 	if (bio_c_out != NULL)
 		{
 		BIO_free(bio_c_out);
 		bio_c_out=NULL;
 		}
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}


@@ -932,6 +946,7 @@ static void print_stuff(BIO *bio, SSL *s, int full)
 	SSL_CIPHER *c;
 	X509_NAME *xn;
 	int j,i;
+	const COMP_METHOD *comp, *expansion;

 	if (full)
 		{
@@ -1034,6 +1049,12 @@ static void print_stuff(BIO *bio, SSL *s, int full)
 							 EVP_PKEY_bits(pktmp));
 		EVP_PKEY_free(pktmp);
 	}
+	comp=SSL_get_current_compression(s);
+	expansion=SSL_get_current_expansion(s);
+	BIO_printf(bio,"Compression: %s\n",
+		comp ? SSL_COMP_get_name(comp) : "NONE");
+	BIO_printf(bio,"Expansion: %s\n",
+		expansion ? SSL_COMP_get_name(expansion) : "NONE");
 	SSL_SESSION_print(bio,SSL_get_session(s));
 	BIO_printf(bio,"---\n");
 	if (peer != NULL)
--- a/apps/s_server.c
+++ b/apps/s_server.c
@@ -114,17 +114,27 @@
 * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project.
 */

+/* Until the key-gen callbacks are modified to use newer prototypes, we allow
+ * deprecated functions for openssl-internal code */
+#ifdef OPENSSL_NO_DEPRECATED
+#undef OPENSSL_NO_DEPRECATED
+#endif
+
 #include <assert.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
-#include <sys/types.h>
+
 #include <sys/stat.h>
 #include <openssl/e_os2.h>
 #ifdef OPENSSL_NO_STDIO
 #define APPS_WIN16
 #endif

+#if !defined(OPENSSL_SYS_NETWARE)  /* conflicts with winsock2 stuff on netware */
+#include <sys/types.h>
+#endif
+
 /* With IPv6, it looks like Digital has mixed up the proper order of
   recursive header file inclusion, resulting in the compiler complaining
   that u_int isn't defined, but only if _POSIX_C_SOURCE is defined, which
@@ -145,10 +155,6 @@ typedef unsigned int u_int;
 #include <openssl/rand.h>
 #include "s_apps.h"

-#ifdef OPENSSL_SYS_WINDOWS
-#include <conio.h>
-#endif
-
 #ifdef OPENSSL_SYS_WINCE
 /* Windows CE incorrectly defines fileno as returning void*, so to avoid problems below... */
 #ifdef fileno
@@ -249,7 +255,9 @@ static int s_msg=0;
 static int s_quiet=0;

 static int hack=0;
+#ifndef OPENSSL_NO_ENGINE
 static char *engine_id=NULL;
+#endif
 static const char *session_id_prefix=NULL;

 #ifdef MONOLITH
@@ -274,7 +282,9 @@ static void s_server_init(void)
 	s_msg=0;
 	s_quiet=0;
 	hack=0;
+#ifndef OPENSSL_NO_ENGINE
 	engine_id=NULL;
+#endif
 	}
 #endif

@@ -331,7 +341,9 @@ static void sv_usage(void)
 	BIO_printf(bio_err," -WWW          - Respond to a 'GET /<path> HTTP/1.0' with file ./<path>\n");
 	BIO_printf(bio_err," -HTTP         - Respond to a 'GET /<path> HTTP/1.0' with file ./<path>\n");
        BIO_printf(bio_err,"                 with the assumption it contains a complete HTTP response.\n");
+#ifndef OPENSSL_NO_ENGINE
 	BIO_printf(bio_err," -engine id    - Initialise and use the specified engine\n");
+#endif
 	BIO_printf(bio_err," -id_prefix arg - Generate SSL/TLS session IDs prefixed by 'arg'\n");
 	BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 	}
@@ -506,7 +518,9 @@ int MAIN(int argc, char *argv[])
 	int no_tmp_rsa=0,no_dhe=0,no_ecdhe=0,nocert=0;
 	int state=0;
 	SSL_METHOD *meth=NULL;
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e=NULL;
+#endif
 	char *inrand=NULL;

 #if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
@@ -690,11 +704,13 @@ int MAIN(int argc, char *argv[])
 			if (--argc < 1) goto bad;
 			session_id_prefix = *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine_id= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -719,7 +735,9 @@ bad:
 	SSL_load_error_strings();
 	OpenSSL_add_ssl_algorithms();

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine_id, 1);
+#endif

 	if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL
 		&& !RAND_status())
@@ -946,30 +964,30 @@ end:
 		bio_s_out=NULL;
 		}
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

 static void print_stats(BIO *bio, SSL_CTX *ssl_ctx)
 	{
 	BIO_printf(bio,"%4ld items in the session cache\n",
 		SSL_CTX_sess_number(ssl_ctx));
-	BIO_printf(bio,"%4d client connects (SSL_connect())\n",
+	BIO_printf(bio,"%4ld client connects (SSL_connect())\n",
 		SSL_CTX_sess_connect(ssl_ctx));
-	BIO_printf(bio,"%4d client renegotiates (SSL_connect())\n",
+	BIO_printf(bio,"%4ld client renegotiates (SSL_connect())\n",
 		SSL_CTX_sess_connect_renegotiate(ssl_ctx));
-	BIO_printf(bio,"%4d client connects that finished\n",
+	BIO_printf(bio,"%4ld client connects that finished\n",
 		SSL_CTX_sess_connect_good(ssl_ctx));
-	BIO_printf(bio,"%4d server accepts (SSL_accept())\n",
+	BIO_printf(bio,"%4ld server accepts (SSL_accept())\n",
 		SSL_CTX_sess_accept(ssl_ctx));
-	BIO_printf(bio,"%4d server renegotiates (SSL_accept())\n",
+	BIO_printf(bio,"%4ld server renegotiates (SSL_accept())\n",
 		SSL_CTX_sess_accept_renegotiate(ssl_ctx));
-	BIO_printf(bio,"%4d server accepts that finished\n",
+	BIO_printf(bio,"%4ld server accepts that finished\n",
 		SSL_CTX_sess_accept_good(ssl_ctx));
-	BIO_printf(bio,"%4d session cache hits\n",SSL_CTX_sess_hits(ssl_ctx));
-	BIO_printf(bio,"%4d session cache misses\n",SSL_CTX_sess_misses(ssl_ctx));
-	BIO_printf(bio,"%4d session cache timeouts\n",SSL_CTX_sess_timeouts(ssl_ctx));
-	BIO_printf(bio,"%4d callback cache hits\n",SSL_CTX_sess_cb_hits(ssl_ctx));
-	BIO_printf(bio,"%4d cache full overflows (%d allowed)\n",
+	BIO_printf(bio,"%4ld session cache hits\n",SSL_CTX_sess_hits(ssl_ctx));
+	BIO_printf(bio,"%4ld session cache misses\n",SSL_CTX_sess_misses(ssl_ctx));
+	BIO_printf(bio,"%4ld session cache timeouts\n",SSL_CTX_sess_timeouts(ssl_ctx));
+	BIO_printf(bio,"%4ld callback cache hits\n",SSL_CTX_sess_cb_hits(ssl_ctx));
+	BIO_printf(bio,"%4ld cache full overflows (%ld allowed)\n",
 		SSL_CTX_sess_cache_full(ssl_ctx),
 		SSL_CTX_sess_get_cache_size(ssl_ctx));
 	}
@@ -983,7 +1001,7 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 	unsigned long l;
 	SSL *con=NULL;
 	BIO *sbio;
-#ifdef OPENSSL_SYS_WINDOWS
+#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE)
 	struct timeval tv;
 #endif

@@ -1057,7 +1075,7 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 		if (!read_from_sslcon)
 			{
 			FD_ZERO(&readfds);
-#ifndef OPENSSL_SYS_WINDOWS
+#if !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_NETWARE)
 			FD_SET(fileno(stdin),&readfds);
 #endif
 			FD_SET(s,&readfds);
@@ -1067,8 +1085,8 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 			 * the compiler: if you do have a cast then you can either
 			 * go for (int *) or (void *).
 			 */
-#ifdef OPENSSL_SYS_WINDOWS
-			/* Under Windows we can't select on stdin: only
+#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE)
+                        /* Under DOS (non-djgpp) and Windows we can't select on stdin: only
 			 * on sockets. As a workaround we timeout the select every
 			 * second and check for any keypress. In a proper Windows
 			 * application we wouldn't do this because it is inefficient.
@@ -1262,7 +1280,7 @@ err:
 	BIO_printf(bio_s_out,"CONNECTION CLOSED\n");
 	if (buf != NULL)
 		{
-		memset(buf,0,bufsize);
+		OPENSSL_cleanse(buf,bufsize);
 		OPENSSL_free(buf);
 		}
 	if (ret >= 0)
@@ -1329,7 +1347,13 @@ static int init_ssl_connection(SSL *con)
 	if (SSL_ctrl(con,SSL_CTRL_GET_FLAGS,0,NULL) &
 		TLS1_FLAGS_TLS_PADDING_BUG)
 		BIO_printf(bio_s_out,"Peer has incorrect TLSv1 block padding\n");
-
+#ifndef OPENSSL_NO_KRB5
+	if (con->kssl_ctx->client_princ != NULL)
+		{
+		BIO_printf(bio_s_out,"Kerberos peer principal is %s\n",
+			con->kssl_ctx->client_princ);
+		}
+#endif /* OPENSSL_NO_KRB5 */
 	return(1);
 	}

@@ -1481,7 +1505,9 @@ static int www_body(char *hostname, int s, unsigned char *context)
 			else
 				{
 				BIO_printf(bio_s_out,"read R BLOCK\n");
-#if !defined(OPENSSL_SYS_MSDOS) && !defined(__DJGPP__)
+#if defined(OPENSSL_SYS_NETWARE)
+            delay(1000);
+#elif !defined(OPENSSL_SYS_MSDOS) && !defined(__DJGPP__)
 				sleep(1);
 #endif
 				continue;
@@ -1765,7 +1791,12 @@ static RSA MS_CALLBACK *tmp_rsa_cb(SSL *s, int is_export, int keylength)
 			BIO_printf(bio_err,"Generating temp (%d bit) RSA key...",keylength);
 			(void)BIO_flush(bio_err);
 			}
-		rsa_tmp=RSA_generate_key(keylength,RSA_F4,NULL,NULL);
+		if(((rsa_tmp = RSA_new()) == NULL) || !RSA_generate_key_ex(
+					rsa_tmp, keylength,RSA_F4,NULL))
+			{
+			if(rsa_tmp) RSA_free(rsa_tmp);
+			rsa_tmp = NULL;
+			}
 		if (!s_quiet)
 			{
 			BIO_printf(bio_err,"\n");
--- a/apps/s_socket.c
+++ b/apps/s_socket.c
@@ -62,14 +62,6 @@
 #include <errno.h>
 #include <signal.h>

-#ifdef FLAT_INC
-#include "e_os.h"
-#else
-#include "../e_os.h"
-#endif
-
-#ifndef OPENSSL_NO_SOCK
-
 /* With IPv6, it looks like Digital has mixed up the proper order of
   recursive header file inclusion, resulting in the compiler complaining
   that u_int isn't defined, but only if _POSIX_C_SOURCE is defined, which
@@ -87,8 +79,16 @@ typedef unsigned int u_int;
 #include "s_apps.h"
 #include <openssl/ssl.h>

+#ifdef FLAT_INC
+#include "e_os.h"
+#else
+#include "../e_os.h"
+#endif
+
+#ifndef OPENSSL_NO_SOCK
+
 static struct hostent *GetHostByName(char *name);
-#ifdef OPENSSL_SYS_WINDOWS
+#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_NETWARE)
 static void ssl_sock_cleanup(void);
 #endif
 static int ssl_sock_init(void);
@@ -104,6 +104,10 @@ static int host_ip(char *str, unsigned char ip[4]);
 #define SOCKET_PROTOCOL	IPPROTO_TCP
 #endif

+#ifdef OPENSSL_SYS_NETWARE
+static int wsa_init_done=0;
+#endif
+
 #ifdef OPENSSL_SYS_WINDOWS
 static struct WSAData wsa_state;
 static int wsa_init_done=0;
@@ -152,6 +156,15 @@ static void ssl_sock_cleanup(void)
 		WSACleanup();
 		}
 	}
+#elif defined(OPENSSL_SYS_NETWARE)
+static void sock_cleanup(void)
+    {
+    if (wsa_init_done)
+        {
+        wsa_init_done=0;
+		WSACleanup();
+		}
+	}
 #endif

 static int ssl_sock_init(void)
@@ -187,6 +200,27 @@ static int ssl_sock_init(void)
 		SetWindowLong(topWnd,GWL_WNDPROC,(LONG)lpTopHookProc);
 #endif /* OPENSSL_SYS_WIN16 */
 		}
+#elif defined(OPENSSL_SYS_NETWARE)
+   WORD wVerReq;
+   WSADATA wsaData;
+   int err;
+
+   if (!wsa_init_done)
+      {
+   
+# ifdef SIGINT
+      signal(SIGINT,(void (*)(int))sock_cleanup);
+# endif
+
+      wsa_init_done=1;
+      wVerReq = MAKEWORD( 2, 0 );
+      err = WSAStartup(wVerReq,&wsaData);
+      if (err != 0)
+         {
+         BIO_printf(bio_err,"unable to start WINSOCK2, error code=%d\n",err);
+         return(0);
+         }
+      }
 #endif /* OPENSSL_SYS_WINDOWS */
 	return(1);
 	}
@@ -348,7 +382,7 @@ redoit:
 	ret=accept(acc_sock,(struct sockaddr *)&from,(void *)&len);
 	if (ret == INVALID_SOCKET)
 		{
-#ifdef OPENSSL_SYS_WINDOWS
+#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_NETWARE)
 		i=WSAGetLastError();
 		BIO_printf(bio_err,"accept error %d\n",i);
 #else
@@ -395,7 +429,7 @@ redoit:
 			perror("OPENSSL_malloc");
 			return(0);
 			}
-		strcpy(*host,h1->h_name);
+		BUF_strlcpy(*host,h1->h_name,strlen(h1->h_name)+1);

 		h2=GetHostByName(*host);
 		if (h2 == NULL)
--- a/apps/s_time.c
+++ b/apps/s_time.c
@@ -85,7 +85,7 @@
 #include OPENSSL_UNISTD
 #endif

-#if !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_VXWORKS) && (!defined(OPENSSL_SYS_VMS) || defined(__DECC))
+#if !defined(OPENSSL_SYS_NETWARE) && !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_VXWORKS) && (!defined(OPENSSL_SYS_VMS) || defined(__DECC))
 #define TIMES
 #endif

@@ -105,7 +105,7 @@
 #undef TIMES
 #endif

-#if !defined(TIMES) && !defined(OPENSSL_SYS_VXWORKS)
+#if !defined(TIMES) && !defined(OPENSSL_SYS_VXWORKS) && !defined(OPENSSL_SYS_NETWARE)
 #include <sys/timeb.h>
 #endif

@@ -384,6 +384,20 @@ static double tm_Time_F(int s)
 		ret=((double)(tend.tms_utime-tstart.tms_utime))/HZ;
 		return((ret == 0.0)?1e-6:ret);
 	}
+#elif defined(OPENSSL_SYS_NETWARE)
+    static clock_t tstart,tend;
+
+    if (s == START)
+    {
+        tstart=clock();
+        return(0);
+    }
+    else
+    {
+        tend=clock();
+        ret=(double)((double)(tend)-(double)(tstart));
+        return((ret < 0.001)?0.001:ret);
+    }
 #elif defined(OPENSSL_SYS_VXWORKS)
        {
 	static unsigned long tick_start, tick_end;
@@ -502,7 +516,7 @@ int MAIN(int argc, char **argv)

 		if (s_www_path != NULL)
 			{
-			sprintf(buf,"GET %s HTTP/1.0\r\n\r\n",s_www_path);
+			BIO_snprintf(buf,sizeof buf,"GET %s HTTP/1.0\r\n\r\n",s_www_path);
 			SSL_write(scon,buf,strlen(buf));
 			while ((i=SSL_read(scon,buf,sizeof(buf))) > 0)
 				bytes_read+=i;
@@ -557,7 +571,7 @@ next:

 	if (s_www_path != NULL)
 		{
-		sprintf(buf,"GET %s HTTP/1.0\r\n\r\n",s_www_path);
+		BIO_snprintf(buf,sizeof buf,"GET %s HTTP/1.0\r\n\r\n",s_www_path);
 		SSL_write(scon,buf,strlen(buf));
 		while (SSL_read(scon,buf,sizeof(buf)) > 0)
 			;
@@ -595,7 +609,7 @@ next:

 		if (s_www_path)
 			{
-			sprintf(buf,"GET %s HTTP/1.0\r\n\r\n",s_www_path);
+			BIO_snprintf(buf,sizeof buf,"GET %s HTTP/1.0\r\n\r\n",s_www_path);
 			SSL_write(scon,buf,strlen(buf));
 			while ((i=SSL_read(scon,buf,sizeof(buf))) > 0)
 				bytes_read+=i;
@@ -642,7 +656,7 @@ end:
 		tm_ctx=NULL;
 		}
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

 /***********************************************************************
--- a/apps/sess_id.c
+++ b/apps/sess_id.c
@@ -273,7 +273,7 @@ end:
 	if (out != NULL) BIO_free_all(out);
 	if (x != NULL) SSL_SESSION_free(x);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

 static SSL_SESSION *load_sess_id(char *infile, int format)
--- a/apps/smime.c
+++ b/apps/smime.c
@@ -1,9 +1,9 @@
 /* smime.c */
 /* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
+ * project.
 */
 /* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1999-2003 The OpenSSL Project.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
@@ -104,7 +104,9 @@ int MAIN(int argc, char **argv)
 	int need_rand = 0;
 	int informat = FORMAT_SMIME, outformat = FORMAT_SMIME;
        int keyform = FORMAT_PEM;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif

 	args = argv + 1;
 	ret = 1;
@@ -166,6 +168,10 @@ int MAIN(int argc, char **argv)
 				flags |= PKCS7_BINARY;
 		else if (!strcmp (*args, "-nosigs"))
 				flags |= PKCS7_NOSIGS;
+		else if (!strcmp (*args, "-nooldmime"))
+				flags |= PKCS7_NOOLDMIMETYPE;
+		else if (!strcmp (*args, "-crlfeol"))
+				flags |= PKCS7_CRLFEOL;
 		else if (!strcmp (*args, "-crl_check"))
 				store_flags |= X509_V_FLAG_CRL_CHECK;
 		else if (!strcmp (*args, "-crl_check_all"))
@@ -176,11 +182,13 @@ int MAIN(int argc, char **argv)
 				inrand = *args;
 			} else badarg = 1;
 			need_rand = 1;
+#ifndef OPENSSL_NO_ENGINE
 		} else if (!strcmp(*args,"-engine")) {
 			if (args[1]) {
 				args++;
 				engine = *args;
 			} else badarg = 1;
+#endif
 		} else if (!strcmp(*args,"-passin")) {
 			if (args[1]) {
 				args++;
@@ -330,7 +338,9 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-CAfile file   trusted certificates file\n");
 		BIO_printf (bio_err, "-crl_check     check revocation status of signer's certificate using CRLs\n");
 		BIO_printf (bio_err, "-crl_check_all check revocation status of signer's certificate chain using CRLs\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf (bio_err, "-engine e      use engine e, possibly a hardware device.\n");
+#endif
 		BIO_printf (bio_err, "-passin arg    input file pass phrase source\n");
 		BIO_printf(bio_err,  "-rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,  "               load the file (or the files in the directory) into\n");
@@ -339,7 +349,9 @@ int MAIN(int argc, char **argv)
 		goto end;
 	}

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 	if(!app_passwd(bio_err, passargin, NULL, &passin, NULL)) {
 		BIO_printf(bio_err, "Error getting password\n");
@@ -470,8 +482,14 @@ int MAIN(int argc, char **argv)
 	if(operation == SMIME_ENCRYPT) {
 		p7 = PKCS7_encrypt(encerts, in, cipher, flags);
 	} else if(operation == SMIME_SIGN) {
+		/* If detached data and SMIME output enable partial
+		 * signing.
+		 */
+		if ((flags & PKCS7_DETACHED) && (outformat == FORMAT_SMIME))
+			flags |= PKCS7_STREAM;
 		p7 = PKCS7_sign(signer, key, other, in, flags);
-		if (BIO_reset(in) != 0 && (flags & PKCS7_DETACHED)) {
+		/* Don't need to rewind for partial signing */
+		if (!(flags & PKCS7_STREAM) && (BIO_reset(in) != 0)) {
 		  BIO_printf(bio_err, "Can't rewind input file\n");
 		  goto end;
 		}
--- a/apps/speed.c
+++ b/apps/speed.c
@@ -71,6 +71,8 @@

 /* most of this code has been pilfered from my libdes speed.c program */

+#ifndef OPENSSL_NO_SPEED
+
 #undef SECONDS
 #define SECONDS		3	
 #define RSA_SECONDS	10
@@ -86,7 +88,7 @@

 #include <stdio.h>
 #include <stdlib.h>
-#include <signal.h>
+
 #include <string.h>
 #include <math.h>
 #include "apps.h"
@@ -102,6 +104,10 @@
 #include OPENSSL_UNISTD
 #endif

+#ifndef OPENSSL_SYS_NETWARE
+#include <signal.h>
+#endif
+
 #if defined(__FreeBSD__) || defined(__NetBSD__) || defined(__OpenBSD__) || defined(OPENSSL_SYS_MACOSX)
 # define USE_TOD
 #elif !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_VXWORKS) && (!defined(OPENSSL_SYS_VMS) || defined(__DECC))
@@ -111,6 +117,12 @@
 # define TIMEB
 #endif

+#if defined(OPENSSL_SYS_NETWARE)
+#undef TIMES
+#undef TIMEB
+#include <time.h>
+#endif
+
 #ifndef _IRIX
 # include <time.h>
 #endif
@@ -135,7 +147,7 @@
 #include <sys/timeb.h>
 #endif

-#if !defined(TIMES) && !defined(TIMEB) && !defined(USE_TOD) && !defined(OPENSSL_SYS_VXWORKS)
+#if !defined(TIMES) && !defined(TIMEB) && !defined(USE_TOD) && !defined(OPENSSL_SYS_VXWORKS) && !defined(OPENSSL_SYS_NETWARE)
 #error "It seems neither struct tms nor struct timeb is supported in this platform!"
 #endif

@@ -206,11 +218,21 @@
 #include <openssl/ecdh.h>
 #endif

+/*
+ * The following "HZ" timing stuff should be sync'd up with the code in
+ * crypto/tmdiff.[ch]. That appears to try to do the same job, though I think
+ * this code is more up to date than libcrypto's so there may be features to
+ * migrate over first. This is used in two places further down AFAICS. 
+ * The point is that nothing in openssl actually *uses* that tmdiff stuff, so
+ * either speed.c should be using it or it should go because it's obviously not
+ * useful enough. Anyone want to do a janitorial job on this?
+ */
+
 /* The following if from times(3) man page.  It may need to be changed */
 #ifndef HZ
 # if defined(_SC_CLK_TCK) \
     && (!defined(OPENSSL_SYS_VMS) || __CTRL_VER >= 70000000)
-#  define HZ ((double)sysconf(_SC_CLK_TCK))
+#  define HZ sysconf(_SC_CLK_TCK)
 # else
 #  ifndef CLK_TCK
 #   ifndef _BSD_CLK_TCK_ /* FreeBSD hack */
@@ -224,7 +246,7 @@
 # endif
 #endif

-#if !defined(OPENSSL_SYS_VMS) && !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MACINTOSH_CLASSIC) && !defined(OPENSSL_SYS_OS2)
+#if !defined(OPENSSL_SYS_VMS) && !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MACINTOSH_CLASSIC) && !defined(OPENSSL_SYS_OS2) && !defined(OPENSSL_SYS_NETWARE)
 # define HAVE_FORK 1
 #endif

@@ -286,6 +308,32 @@ static SIGRETTYPE sig_done(int sig)
 #define START	0
 #define STOP	1

+#if defined(OPENSSL_SYS_NETWARE)
+
+   /* for NetWare the best we can do is use clock() which returns the
+    * time, in hundredths of a second, since the NLM began executing
+   */
+static double Time_F(int s)
+	{
+	double ret;
+
+   static clock_t tstart,tend;
+
+   if (s == START)
+   {
+      tstart=clock();
+      return(0);
+   }
+   else
+   {
+      tend=clock();
+      ret=(double)((double)(tend)-(double)(tstart));
+      return((ret < 0.001)?0.001:ret);
+   }
+   }
+
+#else
+
 static double Time_F(int s)
 	{
 	double ret;
@@ -347,7 +395,8 @@ static double Time_F(int s)
 		else
 			{
 			times(&tend);
-			ret=((double)(tend.tms_utime-tstart.tms_utime))/HZ;
+			ret = HZ;
+			ret=(double)(tend.tms_utime-tstart.tms_utime) / ret;
 			return((ret < 1e-3)?1e-3:ret);
 			}
 		}
@@ -393,12 +442,29 @@ static double Time_F(int s)
 # endif
 #endif
 	}
+#endif /* if defined(OPENSSL_SYS_NETWARE) */
+
+
+static const int KDF1_SHA1_len = 20;
+static void *KDF1_SHA1(void *in, size_t inlen, void *out, size_t outlen)
+	{
+#ifndef OPENSSL_NO_SHA
+	if (outlen != SHA_DIGEST_LENGTH)
+		return NULL;
+	return SHA1(in, inlen, out);
+#else
+	return NULL;
+#endif
+	}
+

 int MAIN(int, char **);

 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	unsigned char *buf=NULL,*buf2=NULL;
 	int mret=1;
 	long count=0,save_count=0;
@@ -731,6 +797,7 @@ int MAIN(int argc, char **argv)
 			j--;	/* Otherwise, -elapsed gets confused with
 				   an algorithm. */
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if	((argc > 0) && (strcmp(*argv,"-engine") == 0))
 			{
 			argc--;
@@ -747,6 +814,7 @@ int MAIN(int argc, char **argv)
 			   means all of them should be run) */
 			j--;
 			}
+#endif
 #ifdef HAVE_FORK
 		else if	((argc > 0) && (strcmp(*argv,"-multi") == 0))
 			{
@@ -908,6 +976,7 @@ int MAIN(int argc, char **argv)
 			{
 			dsa_doit[R_DSA_512]=1;
 			dsa_doit[R_DSA_1024]=1;
+			dsa_doit[R_DSA_2048]=1;
 			}
 		else
 #endif
@@ -1064,7 +1133,9 @@ int MAIN(int argc, char **argv)
 #if defined(TIMES) || defined(USE_TOD)
 			BIO_printf(bio_err,"-elapsed        measure time in real time instead of CPU user time.\n");
 #endif
+#ifndef OPENSSL_NO_ENGINE
 			BIO_printf(bio_err,"-engine e       use engine e, possibly a hardware device.\n");
+#endif
 			BIO_printf(bio_err,"-evp e          use EVP e.\n");
 			BIO_printf(bio_err,"-decrypt        time decryption instead of encryption (only EVP).\n");
 			BIO_printf(bio_err,"-mr             produce machine readable output.\n");
@@ -1197,6 +1268,9 @@ int MAIN(int argc, char **argv)
 	c[D_CBC_RC5][0]=count;
 	c[D_CBC_BF][0]=count;
 	c[D_CBC_CAST][0]=count;
+	c[D_CBC_128_AES][0]=count;
+	c[D_CBC_192_AES][0]=count;
+	c[D_CBC_256_AES][0]=count;

 	for (i=1; i<SIZE_NUM; i++)
 		{
@@ -1222,6 +1296,9 @@ int MAIN(int argc, char **argv)
 		c[D_CBC_RC5][i]=c[D_CBC_RC5][i-1]*l0/l1;
 		c[D_CBC_BF][i]=c[D_CBC_BF][i-1]*l0/l1;
 		c[D_CBC_CAST][i]=c[D_CBC_CAST][i-1]*l0/l1;
+		c[D_CBC_128_AES][i]=c[D_CBC_128_AES][i-1]*l0/l1;
+		c[D_CBC_192_AES][i]=c[D_CBC_192_AES][i-1]*l0/l1;
+		c[D_CBC_256_AES][i]=c[D_CBC_256_AES][i-1]*l0/l1;
 		}
 #ifndef OPENSSL_NO_RSA
 	rsa_c[R_RSA_512][0]=count/2000;
@@ -1700,6 +1777,7 @@ int MAIN(int argc, char **argv)
 				else
 					EVP_EncryptFinal_ex(&ctx,buf,&outl);
 				d=Time_F(STOP);
+				EVP_CIPHER_CTX_cleanup(&ctx);
 				}
 			if (evp_md)
 				{
@@ -1926,6 +2004,9 @@ int MAIN(int argc, char **argv)
 				} 
 			else 
 				{
+#if 1
+				EC_GROUP_precompute_mult(ecdsa[j]->group, NULL);
+#endif
 				/* Perform ECDSA signature test */
 				EC_KEY_generate_key(ecdsa[j]);
 				ret = ECDSA_sign(0, buf, 20, ecdsasig, 
@@ -2041,7 +2122,7 @@ int MAIN(int argc, char **argv)
 				}
 			else
 				{
-				ecdh_b[j]->group = ecdh_a[j]->group;
+				ecdh_b[j]->group = EC_GROUP_dup(ecdh_a[j]->group);

 				/* generate two ECDH key pairs */
 				if (!EC_KEY_generate_key(ecdh_a[j]) ||
@@ -2053,12 +2134,28 @@ int MAIN(int argc, char **argv)
 					}
 				else
 					{
-					secret_size_a = ECDH_compute_key(secret_a, 
+					/* If field size is not more than 24 octets, then use SHA-1 hash of result;
+					 * otherwise, use result (see section 4.8 of draft-ietf-tls-ecc-03.txt).
+					 */
+					int field_size, outlen;
+					void *(*kdf)(void *in, size_t inlen, void *out, size_t xoutlen);
+					field_size = EC_GROUP_get_degree(ecdh_a[j]->group);
+					if (field_size <= 24 * 8)
+						{
+						outlen = KDF1_SHA1_len;
+						kdf = KDF1_SHA1;
+						}
+					else
+						{
+						outlen = (field_size+7)/8;
+						kdf = NULL;
+						}
+					secret_size_a = ECDH_compute_key(secret_a, outlen,
 						ecdh_b[j]->pub_key,
-						ecdh_a[j]);
-					secret_size_b = ECDH_compute_key(secret_b, 
+						ecdh_a[j], kdf);
+					secret_size_b = ECDH_compute_key(secret_b, outlen,
 						ecdh_a[j]->pub_key,
-						ecdh_b[j]);
+						ecdh_b[j], kdf);
 					if (secret_size_a != secret_size_b) 
 						ecdh_checks = 0;
 					else
@@ -2087,9 +2184,9 @@ int MAIN(int argc, char **argv)
 					Time_F(START);
 					for (count=0,run=1; COND(ecdh_c[j][0]); count++)
 						{
-						ECDH_compute_key(secret_a, 
+						ECDH_compute_key(secret_a, outlen,
 						ecdh_b[j]->pub_key,
-						ecdh_a[j]);
+						ecdh_a[j], kdf);
 						}
 					d=Time_F(STOP);
 					BIO_printf(bio_err, mr ? "+R7:%ld:%d:%.2f\n" :"%ld %d-bit ECDH ops in %.2fs\n",
@@ -2149,7 +2246,10 @@ show_res:
 #endif
 #ifdef HZ
 #define as_string(s) (#s)
-		printf("HZ=%g", (double)HZ);
+		{
+		double dbl = HZ;
+		printf("HZ=%g", dbl);
+		}
 # ifdef _SC_CLK_TCK
 		printf(" [sysconf value]");
 # endif
@@ -2316,7 +2416,7 @@ end:
 #endif

 	apps_shutdown();
-	EXIT(mret);
+	OPENSSL_EXIT(mret);
 	}

 static void print_message(const char *s, long num, int length)
@@ -2356,8 +2456,8 @@ static void pkey_print_message(char *str, char *str2, long num, int bits,

 static void print_result(int alg,int run_no,int count,double time_used)
 	{
-	BIO_printf(bio_err,mr ? "+R:%ld:%s:%f\n"
-		   : "%ld %s's in %.2fs\n",count,names[alg],time_used);
+	BIO_printf(bio_err,mr ? "+R:%d:%s:%f\n"
+		   : "%d %s's in %.2fs\n",count,names[alg],time_used);
 	results[alg][run_no]=((double)count)/time_used*lengths[run_no];
 	}

@@ -2569,3 +2669,4 @@ static int do_multi(int multi)
 	return 1;
 	}
 #endif
+#endif
--- a/apps/spkac.c
+++ b/apps/spkac.c
@@ -92,7 +92,9 @@ int MAIN(int argc, char **argv)
 	CONF *conf = NULL;
 	NETSCAPE_SPKI *spki = NULL;
 	EVP_PKEY *pkey = NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif

 	apps_startup();

@@ -141,11 +143,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			spksect= *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-noout") == 0)
 			noout=1;
 		else if (strcmp(*argv,"-pubkey") == 0)
@@ -171,7 +175,9 @@ bad:
 		BIO_printf(bio_err," -noout         don't print SPKAC\n");
 		BIO_printf(bio_err," -pubkey        output public key\n");
 		BIO_printf(bio_err," -verify        verify SPKAC signature\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e      use engine e, possibly a hardware device.\n");
+#endif
 		goto end;
 		}

@@ -181,7 +187,9 @@ bad:
 		goto end;
 	}

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 	if(keyfile) {
 		pkey = load_key(bio_err,
@@ -295,5 +303,5 @@ end:
 	EVP_PKEY_free(pkey);
 	if(passin) OPENSSL_free(passin);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
--- a/apps/verify.c
+++ b/apps/verify.c
@@ -86,7 +86,9 @@ int MAIN(int argc, char **argv)
 	STACK_OF(X509) *untrusted = NULL, *trusted = NULL;
 	X509_STORE *cert_ctx=NULL;
 	X509_LOOKUP *lookup=NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif

 	cert_ctx=X509_STORE_new();
 	if (cert_ctx == NULL) goto end;
@@ -142,11 +144,13 @@ int MAIN(int argc, char **argv)
 				if (argc-- < 1) goto end;
 				trustfile= *(++argv);
 				}
+#ifndef OPENSSL_NO_ENGINE
 			else if (strcmp(*argv,"-engine") == 0)
 				{
 				if (--argc < 1) goto end;
 				engine= *(++argv);
 				}
+#endif
 			else if (strcmp(*argv,"-help") == 0)
 				goto end;
 			else if (strcmp(*argv,"-ignore_critical") == 0)
@@ -170,7 +174,9 @@ int MAIN(int argc, char **argv)
 			break;
 		}

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 	lookup=X509_STORE_add_lookup(cert_ctx,X509_LOOKUP_file());
 	if (lookup == NULL) abort();
@@ -219,7 +225,11 @@ int MAIN(int argc, char **argv)
 	ret=0;
 end:
 	if (ret == 1) {
-		BIO_printf(bio_err,"usage: verify [-verbose] [-CApath path] [-CAfile file] [-purpose purpose] [-crl_check] [-engine e] cert1 cert2 ...\n");
+		BIO_printf(bio_err,"usage: verify [-verbose] [-CApath path] [-CAfile file] [-purpose purpose] [-crl_check]");
+#ifndef OPENSSL_NO_ENGINE
+		BIO_printf(bio_err," [-engine e]");
+#endif
+		BIO_printf(bio_err," cert1 cert2 ...\n");
 		BIO_printf(bio_err,"recognized usages:\n");
 		for(i = 0; i < X509_PURPOSE_get_count(); i++) {
 			X509_PURPOSE *ptmp;
@@ -232,7 +242,7 @@ end:
 	sk_X509_pop_free(untrusted, X509_free);
 	sk_X509_pop_free(trusted, X509_free);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

 static int check(X509_STORE *ctx, char *file, STACK_OF(X509) *uchain, STACK_OF(X509) *tchain, int purpose, ENGINE *e)
--- a/apps/version.c
+++ b/apps/version.c
@@ -212,5 +212,5 @@ int MAIN(int argc, char **argv)
 	if (dir)  printf("%s\n",SSLeay_version(SSLEAY_DIR));
 end:
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
--- a/apps/x509.c
+++ b/apps/x509.c
@@ -92,7 +92,9 @@ static char *x509_usage[]={
 " -out arg        - output file - default stdout\n",
 " -passin arg     - private key password source\n",
 " -serial         - print serial number value\n",
-" -hash           - print hash value\n",
+" -subject_hash   - print subject hash value\n",
+" -issuer_hash    - print issuer hash value\n",
+" -hash           - synonym for -subject_hash\n",
 " -subject        - print subject DN\n",
 " -issuer         - print issuer DN\n",
 " -email          - print email address(es)\n",
@@ -131,7 +133,9 @@ static char *x509_usage[]={
 " -extensions     - section from config file with X509V3 extensions to add\n",
 " -clrext         - delete extensions before signing and input certificate\n",
 " -nameopt arg    - various certificate name options\n",
+#ifndef OPENSSL_NO_ENGINE
 " -engine e       - use engine e, possibly a hardware device.\n",
+#endif
 " -certopt arg    - various certificate text options\n",
 NULL
 };
@@ -165,8 +169,8 @@ int MAIN(int argc, char **argv)
 	char *infile=NULL,*outfile=NULL,*keyfile=NULL,*CAfile=NULL;
 	char *CAkeyfile=NULL,*CAserial=NULL;
 	char *alias=NULL;
-	int text=0,serial=0,hash=0,subject=0,issuer=0,startdate=0,enddate=0;
-	int ocspid=0;
+	int text=0,serial=0,subject=0,issuer=0,startdate=0,enddate=0;
+	int subject_hash=0,issuer_hash=0,ocspid=0;
 	int noout=0,sign_flag=0,CA_flag=0,CA_createserial=0,email=0;
 	int trustout=0,clrtrust=0,clrreject=0,aliasout=0,clrext=0;
 	int C=0;
@@ -183,7 +187,9 @@ int MAIN(int argc, char **argv)
 	int need_rand = 0;
 	int checkend=0,checkoffset=0;
 	unsigned long nmflag = 0, certflag = 0;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif

 	reqfile=0;

@@ -354,17 +360,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			if (!set_name_ex(&nmflag, *(++argv))) goto bad;
 			}
-		else if (strcmp(*argv,"-setalias") == 0)
-			{
-			if (--argc < 1) goto bad;
-			alias= *(++argv);
-			trustout = 1;
-			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-C") == 0)
 			C= ++num;
 		else if (strcmp(*argv,"-email") == 0)
@@ -379,8 +381,11 @@ int MAIN(int argc, char **argv)
 			x509req= ++num;
 		else if (strcmp(*argv,"-text") == 0)
 			text= ++num;
-		else if (strcmp(*argv,"-hash") == 0)
-			hash= ++num;
+		else if (strcmp(*argv,"-hash") == 0
+			|| strcmp(*argv,"-subject_hash") == 0)
+			subject_hash= ++num;
+		else if (strcmp(*argv,"-issuer_hash") == 0)
+			issuer_hash= ++num;
 		else if (strcmp(*argv,"-subject") == 0)
 			subject= ++num;
 		else if (strcmp(*argv,"-issuer") == 0)
@@ -450,7 +455,9 @@ bad:
 		goto end;
 		}

+#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
+#endif

 	if (need_rand)
 		app_RAND_load_file(NULL, bio_err, 0);
@@ -705,10 +712,14 @@ bad:
 				if (alstr) BIO_printf(STDout,"%s\n", alstr);
 				else BIO_puts(STDout,"<No Alias>\n");
 				}
-			else if (hash == i)
+			else if (subject_hash == i)
 				{
 				BIO_printf(STDout,"%08lx\n",X509_subject_name_hash(x));
 				}
+			else if (issuer_hash == i)
+				{
+				BIO_printf(STDout,"%08lx\n",X509_issuer_name_hash(x));
+				}
 			else if (pprint == i)
 				{
 				X509_PURPOSE *ptmp;
@@ -1029,108 +1040,47 @@ end:
 	sk_ASN1_OBJECT_pop_free(reject, ASN1_OBJECT_free);
 	if (passin) OPENSSL_free(passin);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

-static ASN1_INTEGER *load_serial(char *CAfile, char *serialfile, int create)
+static ASN1_INTEGER *x509_load_serial(char *CAfile, char *serialfile, int create)
 	{
 	char *buf = NULL, *p;
-	MS_STATIC char buf2[1024];
-	ASN1_INTEGER *bs = NULL, *bs2 = NULL;
-	BIO *io = NULL;
+	ASN1_INTEGER *bs = NULL;
 	BIGNUM *serial = NULL;
+	size_t len;

-	buf=OPENSSL_malloc( ((serialfile == NULL)
+	len = ((serialfile == NULL)
 		?(strlen(CAfile)+strlen(POSTFIX)+1)
-			:(strlen(serialfile)))+1);
+		:(strlen(serialfile)))+1;
+	buf=OPENSSL_malloc(len);
 	if (buf == NULL) { BIO_printf(bio_err,"out of mem\n"); goto end; }
 	if (serialfile == NULL)
 		{
-		strcpy(buf,CAfile);
+		BUF_strlcpy(buf,CAfile,len);
 		for (p=buf; *p; p++)
 			if (*p == '.')
 				{
 				*p='\0';
 				break;
 				}
-		strcat(buf,POSTFIX);
+		BUF_strlcat(buf,POSTFIX,len);
 		}
 	else
-		strcpy(buf,serialfile);
-	serial=BN_new();
-	bs=ASN1_INTEGER_new();
-	if ((serial == NULL) || (bs == NULL))
-		{
-		ERR_print_errors(bio_err);
-		goto end;
-		}
+		BUF_strlcpy(buf,serialfile,len);

-	io=BIO_new(BIO_s_file());
-	if (io == NULL)
-		{
-		ERR_print_errors(bio_err);
-		goto end;
-		}
-	
-	if (BIO_read_filename(io,buf) <= 0)
-		{
-		if (!create)
-			{
-			perror(buf);
-			goto end;
-			}
-		else
-			{
-			ASN1_INTEGER_set(bs,1);
-			BN_one(serial);
-			}
-		}
-	else 
-		{
-		if (!a2i_ASN1_INTEGER(io,bs,buf2,sizeof buf2))
-			{
-			BIO_printf(bio_err,"unable to load serial number from %s\n",buf);
-			ERR_print_errors(bio_err);
-			goto end;
-			}
-		else
-			{
-			serial=BN_bin2bn(bs->data,bs->length,serial);
-			if (serial == NULL)
-				{
-				BIO_printf(bio_err,"error converting bin 2 bn");
-				goto end;
-				}
-			}
-		}
+	serial = load_serial(buf, create, NULL);
+	if (serial == NULL) goto end;

 	if (!BN_add_word(serial,1))
 		{ BIO_printf(bio_err,"add_word failure\n"); goto end; }
-	if (!(bs2 = BN_to_ASN1_INTEGER(serial, NULL)))
-		{ BIO_printf(bio_err,"error converting bn 2 asn1_integer\n"); goto end; }
-	if (BIO_write_filename(io,buf) <= 0)
-		{
-		BIO_printf(bio_err,"error attempting to write serial number file\n");
-		perror(buf);
-		goto end;
-		}
-	i2a_ASN1_INTEGER(io,bs2);
-	BIO_puts(io,"\n");

-	BIO_free(io);
-	if (buf) OPENSSL_free(buf);
-	ASN1_INTEGER_free(bs2);
-	BN_free(serial);
-	io=NULL;
-	return bs;
+	if (!save_serial(buf, NULL, serial, &bs)) goto end;

 end:
 	if (buf) OPENSSL_free(buf);
-	BIO_free(io);
-	ASN1_INTEGER_free(bs);
 	BN_free(serial);
-	return NULL;
-
+	return bs;
 	}

 static int x509_certify(X509_STORE *ctx, char *CAfile, const EVP_MD *digest,
@@ -1152,10 +1102,10 @@ static int x509_certify(X509_STORE *ctx, char *CAfile, const EVP_MD *digest,
 		goto end;
 		}
 	if (sno) bs = sno;
-	else if (!(bs = load_serial(CAfile, serialfile, create)))
+	else if (!(bs = x509_load_serial(CAfile, serialfile, create)))
 		goto end;

-	if (!X509_STORE_add_cert(ctx,x)) goto end;
+/*	if (!X509_STORE_add_cert(ctx,x)) goto end;*/

 	/* NOTE: this certificate can/should be self signed, unless it was
 	 * a certificate request in which case it is not. */
--- a/bugs/SSLv3
+++ b/bugs/SSLv3
@@ -29,7 +29,7 @@ RC4-MD5, but a re-connect tries to use DES-CBC-SHA.  So netscape, when
 doing a re-connect, always takes the first cipher in the cipher list.

 If we accept a netscape connection, demand a client cert, have a
-non-self-sighed CA which does not have it's CA in netscape, and the
+non-self-signed CA which does not have it's CA in netscape, and the
 browser has a cert, it will crash/hang.  Works for 3.x and 4.xbeta

 Netscape browsers do not really notice the server sending a
--- a/certs/expired/vsign3.pem
+++ b/certs/expired/vsign3.pem
@@ -0,0 +1,18 @@
+subject=/C=US/O=VeriSign, Inc./OU=Class 3 Public Primary Certification Authority
+notBefore=Jan 29 00:00:00 1996 GMT
+notAfter=Jan  7 23:59:59 2004 GMT
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
--- a/certs/vsign3.pem
+++ b/certs/vsign3.pem
@@ -1,18 +1,17 @@
 subject=/C=US/O=VeriSign, Inc./OU=Class 3 Public Primary Certification Authority
 notBefore=Jan 29 00:00:00 1996 GMT
-notAfter=Jan  7 23:59:59 2004 GMT
+notAfter=Aug  1 23:59:59 2028 GMT
 -----BEGIN CERTIFICATE-----
-MIICPTCCAaYCEQDknv3zOugOz6URPhmkJAIyMA0GCSqGSIb3DQEBAgUAMF8xCzAJ
-BgNVBAYTAlVTMRcwFQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE3MDUGA1UECxMuQ2xh
-c3MgMyBQdWJsaWMgUHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTAeFw05
-NjAxMjkwMDAwMDBaFw0wNDAxMDcyMzU5NTlaMF8xCzAJBgNVBAYTAlVTMRcwFQYD
-VQQKEw5WZXJpU2lnbiwgSW5jLjE3MDUGA1UECxMuQ2xhc3MgMyBQdWJsaWMgUHJp
-bWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTCBnzANBgkqhkiG9w0BAQEFAAOB
-jQAwgYkCgYEAyVxZnvIbigEUtBDfBEDb41evakVAj4QMC9Ez2dkRz+4CWB8l9yqo
-RAWq7AMfeH+ek7maAKojfdashaJjRcdyJ8z0TMZ1cdI5709C8HXfCpDGjiBvmA/4
-rCNfcCk2pMmG57GaIMtTpYXnPb59mv4kRTPcdhXtD6JxZExlLoFoRacCAwEAATAN
-BgkqhkiG9w0BAQIFAAOBgQBhcOwvP579K+ZoVCGwZ3kIDCCWMYoNer62Jt95LCJp
-STbjl3diYaIy13pUITa6Ask05yXaRDWw0lyAXbOU+Pms7qRgdSoflUkjsUp89LNH
-ciFbfperVKxi513srpvSybIk+4Kt6WcVS7qqpvCXoPawl1cAyAw8CaCCBLpB2veZ
-pA==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 -----END CERTIFICATE-----
--- a/106
+++ b/106
@@ -74,34 +74,27 @@ if [ "x$XREL" != "x" ]; then
 		echo "whatever-whatever-sco5"; exit 0
 		;;
 	    4.2MP)
-		if [ "x$VERSION" = "x2.01" ]; then
-		    echo "${MACHINE}-whatever-unixware201"; exit 0
-		elif [ "x$VERSION" = "x2.02" ]; then
-		    echo "${MACHINE}-whatever-unixware202"; exit 0
-		elif [ "x$VERSION" = "x2.03" ]; then
-		    echo "${MACHINE}-whatever-unixware203"; exit 0
-		elif [ "x$VERSION" = "x2.1.1" ]; then
-		    echo "${MACHINE}-whatever-unixware211"; exit 0
-		elif [ "x$VERSION" = "x2.1.2" ]; then
-		    echo "${MACHINE}-whatever-unixware212"; exit 0
-		elif [ "x$VERSION" = "x2.1.3" ]; then
-		    echo "${MACHINE}-whatever-unixware213"; exit 0
-		else
-		    echo "${MACHINE}-whatever-unixware2"; exit 0
-		fi
+		case "x${VERSION}" in
+		    x2.0*) echo "whatever-whatever-unixware20"; exit 0 ;;
+		    x2.1*) echo "whatever-whatever-unixware21"; exit 0 ;;
+		    x2*)   echo "whatever-whatever-unixware2";  exit 0 ;;
+		esac
 		;;
 	    4.2)
 		echo "whatever-whatever-unixware1"; exit 0
 		;;
-	    OpenUNIX)
-		if [ "`echo x$VERSION | sed -e 's/\..*//'`" = "x8" ]; then
-		    echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0
-		fi
-		;;
 	    5)
-		if [ "`echo x$VERSION | sed -e 's/\..*//'`" = "x7" ]; then
-		    echo "${MACHINE}-sco-unixware7"; exit 0
-		fi
+		case "x${VERSION}" in
+		    # We hardcode i586 in place of ${MACHINE} for the
+		    # following reason. The catch is that even though Pentium
+		    # is minimum requirement for platforms in question,
+		    # ${MACHINE} gets always assigned to i386. Now, problem
+		    # with i386 is that it makes ./config pass 386 to
+		    # ./Configure, which in turn makes make generate
+		    # inefficient SHA-1 (for this moment) code.
+		    x7*)  echo "i586-sco-unixware7";           exit 0 ;;
+		    x8*)  echo "i586-unkn-OpenUNIX${VERSION}"; exit 0 ;;
+		esac
 		;;
 	esac
    fi
@@ -141,7 +134,7 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
 	HPUXVER=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'`
 	case "$HPUXVER" in
 	    1[0-9].*)	# HPUX 10 and 11 targets are unified
-		echo "${MACHINE}-hp-hpux10"; exit 0
+		echo "${MACHINE}-hp-hpux1x"; exit 0
 		;;
 	    *)
 		echo "${MACHINE}-hp-hpux"; exit 0
@@ -196,7 +189,7 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
 	echo "${MACHINE}-whatever-bsdi"; exit 0
 	;;

-    FreeBSD:*)
+    FreeBSD:*:*:*386*)
        VERS=`echo ${RELEASE} | sed -e 's/[-(].*//'`
        MACH=`sysctl -n hw.model`
        ARCH='whatever'
@@ -205,7 +198,6 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
           *486*       ) MACH="i486"     ;;
           Pentium\ II*) MACH="i686"     ;;
           Pentium*    ) MACH="i586"     ;;
-           Alpha*      ) MACH="alpha"    ;;
           *           ) MACH="$MACHINE" ;;
        esac
        case ${MACH} in
@@ -214,6 +206,10 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
        echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0
        ;;

+    FreeBSD:*)
+	echo "${MACHINE}-whatever-freebsd"; exit 0
+	;;
+
    NetBSD:*:*:*386*)
        echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0
 	;;
@@ -414,9 +410,10 @@ if [ "$SYSTEM" = "HP-UX" ];then
  GCC_BITS="32"
  if [ $GCCVER -ge 30 ]; then
    # PA64 support only came in with gcc 3.0.x.
-    # We look for the preprocessor symbol __LP64__ indicating
-    # 64bit bit long and pointer.  sizeof(int) == 32 on HPUX64.
-    if gcc -v -E -x c /dev/null 2>&1 | grep __LP64__ > /dev/null; then
+    # We check if the preprocessor symbol __LP64__ is defined...
+    if echo "__LP64__" | gcc -v -E -x c - 2>/dev/null | grep "^__LP64__" 2>&1 > /dev/null; then
+      : # __LP64__ has slipped through, it therefore is not defined
+    else
      GCC_BITS="64"
    fi
  fi
@@ -461,6 +458,10 @@ if [ "${SYSTEM}-${MACHINE}" = "Linux-alpha" ]; then
  fi
 fi

+if [ "${SYSTEM}" = "AIX" ]; then	# favor vendor cc over gcc
+    (cc) 2>&1 | grep -iv "not found" > /dev/null && CC=cc
+fi
+
 CCVER=${CCVER:-0}

 # read the output of the embedded GuessOS 
@@ -473,7 +474,7 @@ echo Operating system: $GUESSOS
 # more time that I want to waste at the moment
 case "$GUESSOS" in
  mips2-sgi-irix)
-	CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
+	CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
 	CPU=${CPU:-0}
 	if [ $CPU -ge 4000 ]; then
 		options="$options -mips2"
@@ -481,7 +482,7 @@ case "$GUESSOS" in
 	OUT="irix-$CC"
 	;;
  mips3-sgi-irix)
-	CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
+	CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
 	CPU=${CPU:-0}
 	if [ $CPU -ge 5000 ]; then
 		options="$options -mips4"
@@ -497,7 +498,7 @@ case "$GUESSOS" in
 	  echo "         You have about 5 seconds to press Ctrl-C to abort."
 	  (stty -icanon min 0 time 50; read waste) < /dev/tty
 	fi
-        CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
+        CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
        CPU=${CPU:-0}
        if [ $CPU -ge 5000 ]; then
                options="$options -mips4"
@@ -547,12 +548,13 @@ EOF
  ppc-apple-darwin*) OUT="darwin-ppc-cc" ;;
  i386-apple-darwin*) OUT="darwin-i386-cc" ;;
  sparc64-*-linux2)
-	#Before we can uncomment following lines we have to wait at least
-	#till 64-bit glibc for SPARC is operational:-(
-	#echo "WARNING! If you wish to build 64-bit library, then you have to"
-	#echo "         invoke './Configure linux64-sparcv9' *manually*."
-	#echo "         Type return if you want to continue, Ctrl-C to abort."
-	#read waste < /dev/tty
+	echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI"
+	echo "         and wish to build 64-bit library, then you have to"
+	echo "         invoke './Configure linux64-sparcv9' *manually*."
+	if [ "$TEST" = "false" ]; then
+	  echo "          You have about 5 seconds to press Ctrl-C to abort."
+	  (stty -icanon min 0 time 50; read waste) < /dev/tty
+	fi
 	OUT="linux-sparcv9" ;;
  sparc-*-linux2)
 	KARCH=`awk '/^type/{print$3}' /proc/cpuinfo`
@@ -585,6 +587,7 @@ EOF
  arm*-*-linux2) OUT="linux-elf-arm" ;;
  s390-*-linux2) OUT="linux-s390" ;;
  s390x-*-linux?) OUT="linux-s390x" ;;
+  x86_64-*-linux?) OUT="linux-x86_64" ;;
  *-*-linux2) OUT="linux-elf"
 	if [ "$GCCVER" -gt 28 ]; then
          if grep '^model.*Pentium' /proc/cpuinfo >/dev/null ; then
@@ -638,6 +641,8 @@ EOF
  *86*-*-solaris2) OUT="solaris-x86-$CC" ;;
  *-*-sunos4) OUT="sunos-$CC" ;;
  alpha*-*-freebsd*) OUT="FreeBSD-alpha" ;;
+  sparc64-*-freebsd*) OUT="FreeBSD-sparc64" ;;
+  ia64-*-freebsd*) OUT="FreeBSD-ia64" ;;
  *-freebsd[3-9]*) OUT="FreeBSD-elf" ;;
  *-freebsd[1-2]*) OUT="FreeBSD" ;;
  *86*-*-netbsd) OUT="NetBSD-x86" ;;
@@ -678,15 +683,8 @@ EOF
  RM*-siemens-sysv4) OUT="ReliantUNIX" ;;
  *-siemens-sysv4) OUT="SINIX" ;;
  *-hpux1*)
-	if [ $CC = "gcc" ];
-	then
-	  if [ $GCC_BITS = "64" ]; then
-	    OUT="hpux64-parisc-gcc"
-	  else
-	    OUT="hpux-parisc-gcc"
-	  fi
-	else
-	  OUT="hpux-parisc-$CC"
+	if [ $CC = "gcc" -a $GCC_BITS = "64" ]; then
+	    OUT="hpux64-parisc2-gcc"
 	fi
 	KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null`
 	KERNEL_BITS=${KERNEL_BITS:-32}
@@ -694,16 +692,16 @@ EOF
 	CPU_VERSION=${CPU_VERSION:-0}
 	# See <sys/unistd.h> for further info on CPU_VERSION.
 	if   [ $CPU_VERSION -ge 768 ]; then	# IA-64 CPU
-	     echo "NOTICE! 64-bit is the only ABI currently operational on HP-UXi."
-	     echo "        Post request to openssl-dev@openssl.org for 32-bit support."
+	     echo "WARNING! 64-bit ABI is the default configured ABI on HP-UXi."
+	     echo "         If you wish to build 32-bit library, the you have to"
+	     echo "         invoke './Configure hpux-ia64-cc' *manually*."
 	     if [ "$TEST" = "false" ]; then
+		echo "         You have about 5 seconds to press Ctrl-C to abort."
 		(stty -icanon min 0 time 50; read waste) < /dev/tty
 	     fi
 	     OUT="hpux64-ia64-cc"
 	elif [ $CPU_VERSION -ge 532 ]; then	# PA-RISC 2.x CPU
-	     if [ "$CC" = "cc" ]; then
-		OUT="hpux-parisc2-cc" # can't we have hpux-parisc2-gcc?
-	     fi
+	     OUT=${OUT:-"hpux-parisc2-${CC}"}
 	     if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
 		echo "WARNING! If you wish to build 64-bit library then you have to"
 		echo "         invoke './Configure hpux64-parisc2-cc' *manually*."
@@ -713,9 +711,9 @@ EOF
 		fi
 	     fi
 	elif [ $CPU_VERSION -ge 528 ]; then	# PA-RISC 1.1+ CPU
-	     :
+	     OUT="hpux-parisc-${CC}
 	elif [ $CPU_VERSION -ge 523 ]; then	# PA-RISC 1.0 CPU
-	     :
+	     OUT="hpux-parisc-${CC}
 	else					# Motorola(?) CPU
 	     OUT="hpux-$CC"
 	fi
--- a/crypto/Makefile.ssl
+++ b/crypto/Makefile.ssl
@@ -26,31 +26,33 @@ CFLAGS= $(INCLUDE) $(CFLAG)

 LIBS=

-SDIRS=	md2 md5 sha mdc2 hmac ripemd \
+SDIRS=	objects \
+	md2 md4 md5 sha mdc2 hmac ripemd \
 	des rc2 rc4 rc5 idea bf cast \
 	bn ec rsa dsa ecdsa ecdh dh dso engine aes \
-	buffer bio stack lhash rand err objects \
-	evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5
+	buffer bio stack lhash rand err \
+	evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5 \
+	store

 GENERAL=Makefile README crypto-lib.com install.com

 LIB= $(TOP)/libcrypto.a
 SHARED_LIB= libcrypto$(SHLIB_EXT)
-LIBSRC=	cryptlib.c mem.c mem_clr.c mem_dbg.c cversion.c ex_data.c tmdiff.c cpt_err.c ebcdic.c uid.c o_time.c
-LIBOBJ= cryptlib.o mem.o mem_clr.o mem_dbg.o cversion.o ex_data.o tmdiff.o cpt_err.o ebcdic.o uid.o o_time.o
+LIBSRC=	cryptlib.c mem.c mem_clr.c mem_dbg.c cversion.c ex_data.c tmdiff.c cpt_err.c ebcdic.c uid.c o_time.c o_str.c
+LIBOBJ= cryptlib.o mem.o mem_clr.o mem_dbg.o cversion.o ex_data.o tmdiff.o cpt_err.o ebcdic.o uid.o o_time.o o_str.o

 SRC= $(LIBSRC)

 EXHEADER= crypto.h tmdiff.h opensslv.h opensslconf.h ebcdic.h symhacks.h \
 	ossl_typ.h
-HEADER=	cryptlib.h buildinf.h md32_common.h o_time.h $(EXHEADER)
+HEADER=	cryptlib.h buildinf.h md32_common.h o_time.h o_str.h $(EXHEADER)

 ALL=    $(GENERAL) $(SRC) $(HEADER)

 top:
 	@(cd ..; $(MAKE) DIRS=$(DIR) all)

-all: buildinf.h lib subdirs shared
+all: shared

 buildinf.h: ../Makefile.ssl
 	( echo "#ifndef MK1MF_BUILD"; \
@@ -81,11 +83,11 @@ files:
 	done;

 links:
-	@$(TOP)/util/point.sh Makefile.ssl Makefile
+	@sh $(TOP)/util/point.sh Makefile.ssl Makefile
 	@$(PERL) $(TOP)/util/mklink.pl ../include/openssl $(EXHEADER)
 	@$(PERL) $(TOP)/util/mklink.pl ../test $(TEST)
 	@$(PERL) $(TOP)/util/mklink.pl ../apps $(APPS)
-	@$(TOP)/util/point.sh Makefile.ssl Makefile
+	@sh $(TOP)/util/point.sh Makefile.ssl Makefile
 	@for i in $(SDIRS); do \
 	(cd $$i && echo "making links in crypto/$$i..." && \
 	$(MAKE) CC='$(CC)' INCLUDES='${INCLUDES}' CFLAG='${CFLAG}' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' AR='${AR}' PERL='${PERL}' links ); \
@@ -96,7 +98,7 @@ lib:	$(LIBOBJ)
 	$(RANLIB) $(LIB) || echo Never mind.
 	@touch lib

-shared:
+shared: buildinf.h lib subdirs
 	if [ -n "$(SHARED_LIBS)" ]; then \
 		(cd ..; $(MAKE) $(SHARED_LIB)); \
 	fi
@@ -141,7 +143,7 @@ depend:
 	@for i in $(SDIRS) ;\
 	do \
 	(cd $$i && echo "making depend in crypto/$$i..." && \
-	$(MAKE) MAKEFILE='${MAKEFILE}' INCLUDES='${INCLUDES}' CFLAG='${CFLAG}' DEPFLAG='${DEPFLAG}' PERL='${PERL}' depend ); \
+	$(MAKE) MAKEFILE='${MAKEFILE}' INCLUDES='${INCLUDES}' CFLAG='${CFLAG}' DEPFLAG='${DEPFLAG}' MAKEDEPPROG='${MAKEDEPPROG}' KRB5_INCLUDES='${KRB5_INCLUDES}' PERL='${PERL}' depend ); \
 	done;

 clean:
@@ -203,6 +205,8 @@ mem_dbg.o: ../include/openssl/err.h ../include/openssl/lhash.h
 mem_dbg.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
 mem_dbg.o: ../include/openssl/safestack.h ../include/openssl/stack.h
 mem_dbg.o: ../include/openssl/symhacks.h cryptlib.h mem_dbg.c
+o_str.o: ../include/openssl/e_os2.h ../include/openssl/opensslconf.h o_str.c
+o_str.o: o_str.h
 o_time.o: ../include/openssl/e_os2.h ../include/openssl/opensslconf.h o_time.c
 o_time.o: o_time.h
 tmdiff.o: ../e_os.h ../include/openssl/bio.h ../include/openssl/buffer.h
--- a/crypto/aes/Makefile.ssl
+++ b/crypto/aes/Makefile.ssl
@@ -52,7 +52,7 @@ files:
 	$(PERL) $(TOP)/util/files.pl Makefile.ssl >> $(TOP)/MINFO

 links:
-	@$(TOP)/util/point.sh Makefile.ssl Makefile
+	@sh $(TOP)/util/point.sh Makefile.ssl Makefile
 	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
 	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
 	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
--- a/crypto/aes/aes.h
+++ b/crypto/aes/aes.h
@@ -52,12 +52,15 @@
 #ifndef HEADER_AES_H
 #define HEADER_AES_H

+#include <openssl/opensslconf.h>
+
 #ifdef OPENSSL_NO_AES
 #error AES is disabled.
 #endif

-static const int AES_DECRYPT = 0;
-static const int AES_ENCRYPT = 1;
+#define AES_ENCRYPT	1
+#define AES_DECRYPT	0
+
 /* Because array size can't be a const in C, the following two are macros.
   Both sizes are in bytes. */
 #define AES_MAXNR 14
@@ -94,12 +97,21 @@ void AES_cbc_encrypt(const unsigned char *in, unsigned char *out,
 void AES_cfb128_encrypt(const unsigned char *in, unsigned char *out,
 	const unsigned long length, const AES_KEY *key,
 	unsigned char *ivec, int *num, const int enc);
+void AES_cfb1_encrypt(const unsigned char *in, unsigned char *out,
+	const unsigned long length, const AES_KEY *key,
+	unsigned char *ivec, int *num, const int enc);
+void AES_cfb8_encrypt(const unsigned char *in, unsigned char *out,
+	const unsigned long length, const AES_KEY *key,
+	unsigned char *ivec, int *num, const int enc);
+void AES_cfbr_encrypt_block(const unsigned char *in,unsigned char *out,
+			    const int nbits,const AES_KEY *key,
+			    unsigned char *ivec,const int enc);
 void AES_ofb128_encrypt(const unsigned char *in, unsigned char *out,
 	const unsigned long length, const AES_KEY *key,
 	unsigned char *ivec, int *num);
 void AES_ctr128_encrypt(const unsigned char *in, unsigned char *out,
 	const unsigned long length, const AES_KEY *key,
-	unsigned char counter[AES_BLOCK_SIZE],
+	unsigned char ivec[AES_BLOCK_SIZE],
 	unsigned char ecount_buf[AES_BLOCK_SIZE],
 	unsigned int *num);

--- a/crypto/aes/aes_cbc.c
+++ b/crypto/aes/aes_cbc.c
@@ -86,7 +86,7 @@ void AES_cbc_encrypt(const unsigned char *in, unsigned char *out,
 			for(n=len; n < AES_BLOCK_SIZE; ++n)
 				tmp[n] = ivec[n];
 			AES_encrypt(tmp, tmp, key);
-			memcpy(out, tmp, len);
+			memcpy(out, tmp, AES_BLOCK_SIZE);
 			memcpy(ivec, tmp, AES_BLOCK_SIZE);
 		}			
 	} else {
@@ -104,7 +104,7 @@ void AES_cbc_encrypt(const unsigned char *in, unsigned char *out,
 			memcpy(tmp, in, AES_BLOCK_SIZE);
 			AES_decrypt(tmp, tmp, key);
 			for(n=0; n < len; ++n)
-				out[n] ^= ivec[n];
+				out[n] = tmp[n] ^ ivec[n];
 			memcpy(ivec, tmp, AES_BLOCK_SIZE);
 		}			
 	}
--- a/crypto/aes/aes_cfb.c
+++ b/crypto/aes/aes_cfb.c
@@ -155,3 +155,96 @@ void AES_cfb128_encrypt(const unsigned char *in, unsigned char *out,
 	*num=n;
 }

+/* This expects a single block of size nbits for both in and out. Note that
+   it corrupts any extra bits in the last byte of out */
+/* Untested, once it is working, it will be optimised */
+void AES_cfbr_encrypt_block(const unsigned char *in,unsigned char *out,
+			    const int nbits,const AES_KEY *key,
+			    unsigned char *ivec,const int enc)
+    {
+    int n;
+    unsigned char ovec[AES_BLOCK_SIZE*2];
+
+    assert(in && out && key && ivec);
+    if(enc)
+	{
+	/* construct the new IV */
+	AES_encrypt(ivec,ovec,key);
+	/* encrypt the input */
+	for(n=0 ; n < (nbits+7)/8 ; ++n)
+	    out[n]=in[n]^ovec[n];
+	/* fill in the first half of the new IV with the current IV */
+	memcpy(ovec,ivec,AES_BLOCK_SIZE);
+	/* and put the ciphertext in the second half */
+	memcpy(ovec+AES_BLOCK_SIZE,out,(nbits+7)/8);
+	/* shift ovec left most of the bits... */
+	memmove(ovec,ovec+nbits/8,AES_BLOCK_SIZE+(nbits%8 ? 1 : 0));
+	/* now the remaining bits */
+	if(nbits%8 != 0)
+	    for(n=0 ; n < AES_BLOCK_SIZE ; ++n)
+		{
+		ovec[n]<<=nbits%8;
+		ovec[n]|=ovec[n+1]>>(8-nbits%8);
+		}
+	/* finally, move it back into place */
+	memcpy(ivec,ovec,AES_BLOCK_SIZE);
+	}
+    else
+	{
+	/* construct the new IV in the first half of ovec */
+	AES_encrypt(ivec,ovec,key);
+	/* decrypt the input */
+	for(n=0 ; n < (nbits+7)/8 ; ++n)
+	    out[n]=in[n]^ovec[n];
+	/* fill in the first half of the new IV with the current IV */
+	memcpy(ovec,ivec,AES_BLOCK_SIZE);
+	/* append the ciphertext */
+	memcpy(ovec+AES_BLOCK_SIZE,in,(nbits+7)/8);
+	/* shift ovec left most of the bits... */
+	memmove(ovec,ovec+nbits/8,AES_BLOCK_SIZE+(nbits%8 ? 1 : 0));
+	/* now the remaining bits */
+	if(nbits%8 != 0)
+	    for(n=0 ; n < AES_BLOCK_SIZE ; ++n)
+		{
+		ovec[n]<<=nbits%8;
+		ovec[n]|=ovec[n+1]>>(8-nbits%8);
+		}
+	/* finally, move it back into place */
+	memcpy(ivec,ovec,AES_BLOCK_SIZE);
+	}
+    /* it is not necessary to cleanse ovec, since the IV is not secret */
+    }
+
+/* N.B. This expects the input to be packed, MS bit first */
+void AES_cfb1_encrypt(const unsigned char *in, unsigned char *out,
+		      const unsigned long length, const AES_KEY *key,
+		      unsigned char *ivec, int *num, const int enc)
+    {
+    unsigned int n;
+    unsigned char c[1],d[1];
+
+    assert(in && out && key && ivec && num);
+    assert(*num == 0);
+
+    memset(out,0,(length+7)/8);
+    for(n=0 ; n < length ; ++n)
+	{
+	c[0]=(in[n/8]&(1 << (7-n%8))) ? 0x80 : 0;
+	AES_cfbr_encrypt_block(c,d,1,key,ivec,enc);
+	out[n/8]=(out[n/8]&~(1 << (7-n%8)))|((d[0]&0x80) >> (n%8));
+	}
+    }
+
+void AES_cfb8_encrypt(const unsigned char *in, unsigned char *out,
+		      const unsigned long length, const AES_KEY *key,
+		      unsigned char *ivec, int *num, const int enc)
+    {
+    unsigned int n;
+
+    assert(in && out && key && ivec && num);
+    assert(*num == 0);
+
+    for(n=0 ; n < length ; ++n)
+	AES_cfbr_encrypt_block(&in[n],&out[n],8,key,ivec,enc);
+    }
+
--- a/crypto/aes/aes_core.c
+++ b/crypto/aes/aes_core.c
@@ -750,7 +750,7 @@ int AES_set_encrypt_key(const unsigned char *userKey, const int bits,
 	rk[2] = GETU32(userKey +  8);
 	rk[3] = GETU32(userKey + 12);
 	if (bits == 128) {
-		for (;;) {
+		while (1) {
 			temp  = rk[3];
 			rk[4] = rk[0] ^
 				(Te4[(temp >> 16) & 0xff] & 0xff000000) ^
@@ -770,7 +770,7 @@ int AES_set_encrypt_key(const unsigned char *userKey, const int bits,
 	rk[4] = GETU32(userKey + 16);
 	rk[5] = GETU32(userKey + 20);
 	if (bits == 192) {
-		for (;;) {
+		while (1) {
 			temp = rk[ 5];
 			rk[ 6] = rk[ 0] ^
 				(Te4[(temp >> 16) & 0xff] & 0xff000000) ^
@@ -792,7 +792,7 @@ int AES_set_encrypt_key(const unsigned char *userKey, const int bits,
 	rk[6] = GETU32(userKey + 24);
 	rk[7] = GETU32(userKey + 28);
 	if (bits == 256) {
-		for (;;) {
+		while (1) {
 			temp = rk[ 7];
 			rk[ 8] = rk[ 0] ^
 				(Te4[(temp >> 16) & 0xff] & 0xff000000) ^
--- a/crypto/aes/aes_ctr.c
+++ b/crypto/aes/aes_ctr.c
@@ -59,39 +59,44 @@
 #include <openssl/aes.h>
 #include "aes_locl.h"

-/* NOTE: CTR mode is big-endian.  The rest of the AES code
+/* NOTE: the IV/counter CTR mode is big-endian.  The rest of the AES code
 * is endian-neutral. */

-/* increment counter (128-bit int) by 2^64 */
+/* increment counter (128-bit int) by 1 */
 static void AES_ctr128_inc(unsigned char *counter) {
 	unsigned long c;

-	/* Grab 3rd dword of counter and increment */
-#ifdef L_ENDIAN
+	/* Grab bottom dword of counter and increment */
+	c = GETU32(counter + 12);
+	c++;
+	PUTU32(counter + 12, c);
+
+	/* if no overflow, we're done */
+	if (c)
+		return;
+
+	/* Grab 1st dword of counter and increment */
 	c = GETU32(counter +  8);
 	c++;
 	PUTU32(counter +  8, c);
-#else
+
+	/* if no overflow, we're done */
+	if (c)
+		return;
+
+	/* Grab 2nd dword of counter and increment */
 	c = GETU32(counter +  4);
 	c++;
 	PUTU32(counter +  4, c);
-#endif

 	/* if no overflow, we're done */
 	if (c)
 		return;

 	/* Grab top dword of counter and increment */
-#ifdef L_ENDIAN
-	c = GETU32(counter + 12);
-	c++;
-	PUTU32(counter + 12, c);
-#else
 	c = GETU32(counter +  0);
 	c++;
 	PUTU32(counter +  0, c);
-#endif
-
 }

 /* The input encrypted as though 128bit counter mode is being
@@ -100,10 +105,16 @@ static void AES_ctr128_inc(unsigned char *counter) {
 * encrypted counter is kept in ecount_buf.  Both *num and
 * ecount_buf must be initialised with zeros before the first
 * call to AES_ctr128_encrypt().
+ *
+ * This algorithm assumes that the counter is in the x lower bits
+ * of the IV (ivec), and that the application has full control over
+ * overflow and the rest of the IV.  This implementation takes NO
+ * responsability for checking that the counter doesn't overflow
+ * into the rest of the IV when incremented.
 */
 void AES_ctr128_encrypt(const unsigned char *in, unsigned char *out,
 	const unsigned long length, const AES_KEY *key,
-	unsigned char counter[AES_BLOCK_SIZE],
+	unsigned char ivec[AES_BLOCK_SIZE],
 	unsigned char ecount_buf[AES_BLOCK_SIZE],
 	unsigned int *num) {

@@ -117,8 +128,8 @@ void AES_ctr128_encrypt(const unsigned char *in, unsigned char *out,

 	while (l--) {
 		if (n == 0) {
-			AES_encrypt(counter, ecount_buf, key);
-			AES_ctr128_inc(counter);
+			AES_encrypt(ivec, ecount_buf, key);
+ 			AES_ctr128_inc(ivec);
 		}
 		*(out++) = *(in++) ^ ecount_buf[n];
 		n = (n+1) % AES_BLOCK_SIZE;
--- a/crypto/asn1/Makefile.ssl
+++ b/crypto/asn1/Makefile.ssl
--- a/crypto/asn1/a_bitstr.c
+++ b/crypto/asn1/a_bitstr.c
@@ -113,11 +113,12 @@ int i2c_ASN1_BIT_STRING(ASN1_BIT_STRING *a, unsigned char **pp)
 	return(ret);
 	}

-ASN1_BIT_STRING *c2i_ASN1_BIT_STRING(ASN1_BIT_STRING **a, unsigned char **pp,
-	     long len)
+ASN1_BIT_STRING *c2i_ASN1_BIT_STRING(ASN1_BIT_STRING **a,
+	const unsigned char **pp, long len)
 	{
 	ASN1_BIT_STRING *ret=NULL;
-	unsigned char *p,*s;
+	const unsigned char *p;
+	unsigned char *s;
 	int i;

 	if (len < 1)
--- a/crypto/asn1/a_bool.c
+++ b/crypto/asn1/a_bool.c
@@ -75,10 +75,10 @@ int i2d_ASN1_BOOLEAN(int a, unsigned char **pp)
 	return(r);
 	}

-int d2i_ASN1_BOOLEAN(int *a, unsigned char **pp, long length)
+int d2i_ASN1_BOOLEAN(int *a, const unsigned char **pp, long length)
 	{
 	int ret= -1;
-	unsigned char *p;
+	const unsigned char *p;
 	long len;
 	int inf,tag,xclass;
 	int i=0;
--- a/crypto/asn1/a_bytes.c
+++ b/crypto/asn1/a_bytes.c
@@ -60,14 +60,15 @@
 #include "cryptlib.h"
 #include <openssl/asn1.h>

-static int asn1_collate_primitive(ASN1_STRING *a, ASN1_CTX *c);
+static int asn1_collate_primitive(ASN1_STRING *a, ASN1_const_CTX *c);
 /* type is a 'bitmap' of acceptable string types.
 */
-ASN1_STRING *d2i_ASN1_type_bytes(ASN1_STRING **a, unsigned char **pp,
+ASN1_STRING *d2i_ASN1_type_bytes(ASN1_STRING **a, const unsigned char **pp,
 	     long length, int type)
 	{
 	ASN1_STRING *ret=NULL;
-	unsigned char *p,*s;
+	const unsigned char *p;
+	unsigned char *s;
 	long len;
 	int inf,tag,xclass;
 	int i=0;
@@ -153,11 +154,12 @@ int i2d_ASN1_bytes(ASN1_STRING *a, unsigned char **pp, int tag, int xclass)
 	return(r);
 	}

-ASN1_STRING *d2i_ASN1_bytes(ASN1_STRING **a, unsigned char **pp, long length,
-	     int Ptag, int Pclass)
+ASN1_STRING *d2i_ASN1_bytes(ASN1_STRING **a, const unsigned char **pp,
+	     long length, int Ptag, int Pclass)
 	{
 	ASN1_STRING *ret=NULL;
-	unsigned char *p,*s;
+	const unsigned char *p;
+	unsigned char *s;
 	long len;
 	int inf,tag,xclass;
 	int i=0;
@@ -185,7 +187,7 @@ ASN1_STRING *d2i_ASN1_bytes(ASN1_STRING **a, unsigned char **pp, long length,

 	if (inf & V_ASN1_CONSTRUCTED)
 		{
-		ASN1_CTX c;
+		ASN1_const_CTX c;

 		c.pp=pp;
 		c.p=p;
@@ -247,7 +249,7 @@ err:
 * them into the one structure that is then returned */
 /* There have been a few bug fixes for this function from
 * Paul Keogh <paul.keogh@sse.ie>, many thanks to him */
-static int asn1_collate_primitive(ASN1_STRING *a, ASN1_CTX *c)
+static int asn1_collate_primitive(ASN1_STRING *a, ASN1_const_CTX *c)
 	{
 	ASN1_STRING *os=NULL;
 	BUF_MEM b;
@@ -268,7 +270,7 @@ static int asn1_collate_primitive(ASN1_STRING *a, ASN1_CTX *c)
 		{
 		if (c->inf & 1)
 			{
-			c->eos=ASN1_check_infinite_end(&c->p,
+			c->eos=ASN1_const_check_infinite_end(&c->p,
 				(long)(c->max-c->p));
 			if (c->eos) break;
 			}
@@ -296,7 +298,7 @@ static int asn1_collate_primitive(ASN1_STRING *a, ASN1_CTX *c)
 		num+=os->length;
 		}

-	if (!asn1_Finish(c)) goto err;
+	if (!asn1_const_Finish(c)) goto err;

 	a->length=num;
 	if (a->data != NULL) OPENSSL_free(a->data);
--- a/crypto/asn1/a_d2i_fp.c
+++ b/crypto/asn1/a_d2i_fp.c
@@ -107,14 +107,14 @@ err:
 void *ASN1_item_d2i_bio(const ASN1_ITEM *it, BIO *in, void *x)
 	{
 	BUF_MEM *b = NULL;
-	unsigned char *p;
+	const unsigned char *p;
 	void *ret=NULL;
 	int len;

 	len = asn1_d2i_read_bio(in, &b);
 	if(len < 0) goto err;

-	p=(unsigned char *)b->data;
+	p=(const unsigned char *)b->data;
 	ret=ASN1_item_d2i(x,&p,len, it);
 err:
 	if (b != NULL) BUF_MEM_free(b);
@@ -146,10 +146,15 @@ static int asn1_d2i_read_bio(BIO *in, BUF_MEM **pb)
 	unsigned char *p;
 	int i;
 	int ret=-1;
-	ASN1_CTX c;
+	ASN1_const_CTX c;
 	int want=HEADER_SIZE;
 	int eos=0;
+#if defined(__GNUC__) && defined(__ia64)
+	/* pathetic compiler bug in all known versions as of Nov. 2002 */
+	long off=0;
+#else
 	int off=0;
+#endif
 	int len=0;

 	b=BUF_MEM_new();
@@ -226,13 +231,18 @@ static int asn1_d2i_read_bio(BIO *in, BUF_MEM **pb)
 					ASN1err(ASN1_F_ASN1_D2I_BIO,ERR_R_MALLOC_FAILURE);
 					goto err;
 					}
+				while (want > 0)
+					{
 					i=BIO_read(in,&(b->data[len]),want);
 					if (i <= 0)
 						{
-					ASN1err(ASN1_F_ASN1_D2I_BIO,ASN1_R_NOT_ENOUGH_DATA);
+						ASN1err(ASN1_F_ASN1_D2I_BIO,
+						    ASN1_R_NOT_ENOUGH_DATA);
 						goto err;
 						}
 					len+=i;
+					want -= i;
+					}
 				}
 			off+=(int)c.slen;
 			if (eos <= 0)
--- a/crypto/asn1/a_dup.c
+++ b/crypto/asn1/a_dup.c
@@ -91,7 +91,8 @@ char *ASN1_dup(int (*i2d)(), char *(*d2i)(), char *x)

 void *ASN1_item_dup(const ASN1_ITEM *it, void *x)
 	{
-	unsigned char *b = NULL, *p;
+	unsigned char *b = NULL;
+	const unsigned char *p;
 	long i;
 	void *ret;

--- a/crypto/asn1/a_enum.c
+++ b/crypto/asn1/a_enum.c
@@ -67,12 +67,13 @@

 int ASN1_ENUMERATED_set(ASN1_ENUMERATED *a, long v)
 	{
-	int i,j,k;
+	int j,k;
+	unsigned int i;
 	unsigned char buf[sizeof(long)+1];
 	long d;

 	a->type=V_ASN1_ENUMERATED;
-	if (a->length < (sizeof(long)+1))
+	if (a->length < (int)(sizeof(long)+1))
 		{
 		if (a->data != NULL)
 			OPENSSL_free(a->data);
@@ -116,7 +117,7 @@ long ASN1_ENUMERATED_get(ASN1_ENUMERATED *a)
 	else if (i != V_ASN1_ENUMERATED)
 		return -1;
 	
-	if (a->length > sizeof(long))
+	if (a->length > (int)sizeof(long))
 		{
 		/* hmm... a bit ugly */
 		return(0xffffffffL);
--- a/crypto/asn1/a_gentm.c
+++ b/crypto/asn1/a_gentm.c
@@ -181,7 +181,7 @@ err:
 	return(0);
 	}

-int ASN1_GENERALIZEDTIME_set_string(ASN1_GENERALIZEDTIME *s, char *str)
+int ASN1_GENERALIZEDTIME_set_string(ASN1_GENERALIZEDTIME *s, const char *str)
 	{
 	ASN1_GENERALIZEDTIME t;

@@ -208,6 +208,7 @@ ASN1_GENERALIZEDTIME *ASN1_GENERALIZEDTIME_set(ASN1_GENERALIZEDTIME *s,
 	char *p;
 	struct tm *ts;
 	struct tm data;
+	size_t len = 20; 

 	if (s == NULL)
 		s=M_ASN1_GENERALIZEDTIME_new();
@@ -219,16 +220,16 @@ ASN1_GENERALIZEDTIME *ASN1_GENERALIZEDTIME_set(ASN1_GENERALIZEDTIME *s,
 		return(NULL);

 	p=(char *)s->data;
-	if ((p == NULL) || (s->length < 16))
+	if ((p == NULL) || ((size_t)s->length < len))
 		{
-		p=OPENSSL_malloc(20);
+		p=OPENSSL_malloc(len);
 		if (p == NULL) return(NULL);
 		if (s->data != NULL)
 			OPENSSL_free(s->data);
 		s->data=(unsigned char *)p;
 		}

-	sprintf(p,"%04d%02d%02d%02d%02d%02dZ",ts->tm_year + 1900,
+	BIO_snprintf(p,len,"%04d%02d%02d%02d%02d%02dZ",ts->tm_year + 1900,
 		     ts->tm_mon+1,ts->tm_mday,ts->tm_hour,ts->tm_min,ts->tm_sec);
 	s->length=strlen(p);
 	s->type=V_ASN1_GENERALIZEDTIME;
--- a/crypto/asn1/a_hdr.c
+++ b/crypto/asn1/a_hdr.c
@@ -76,7 +76,7 @@ int i2d_ASN1_HEADER(ASN1_HEADER *a, unsigned char **pp)
 	M_ASN1_I2D_finish();
 	}

-ASN1_HEADER *d2i_ASN1_HEADER(ASN1_HEADER **a, unsigned char **pp,
+ASN1_HEADER *d2i_ASN1_HEADER(ASN1_HEADER **a, const unsigned char **pp,
 	     long length)
 	{
 	M_ASN1_D2I_vars(a,ASN1_HEADER *,ASN1_HEADER_new);
--- a/crypto/asn1/a_int.c
+++ b/crypto/asn1/a_int.c
@@ -155,11 +155,12 @@ int i2c_ASN1_INTEGER(ASN1_INTEGER *a, unsigned char **pp)

 /* Convert just ASN1 INTEGER content octets to ASN1_INTEGER structure */

-ASN1_INTEGER *c2i_ASN1_INTEGER(ASN1_INTEGER **a, unsigned char **pp,
+ASN1_INTEGER *c2i_ASN1_INTEGER(ASN1_INTEGER **a, const unsigned char **pp,
 	     long len)
 	{
 	ASN1_INTEGER *ret=NULL;
-	unsigned char *p,*to,*s, *pend;
+	const unsigned char *p, *pend;
+	unsigned char *to,*s;
 	int i;

 	if ((a == NULL) || ((*a) == NULL))
@@ -247,11 +248,12 @@ err:
 * with its MSB set as negative (it doesn't add a padding zero).
 */

-ASN1_INTEGER *d2i_ASN1_UINTEGER(ASN1_INTEGER **a, unsigned char **pp,
+ASN1_INTEGER *d2i_ASN1_UINTEGER(ASN1_INTEGER **a, const unsigned char **pp,
 	     long length)
 	{
 	ASN1_INTEGER *ret=NULL;
-	unsigned char *p,*to,*s;
+	const unsigned char *p;
+	unsigned char *to,*s;
 	long len;
 	int inf,tag,xclass;
 	int i;
@@ -313,12 +315,13 @@ err:

 int ASN1_INTEGER_set(ASN1_INTEGER *a, long v)
 	{
-	int i,j,k;
+	int j,k;
+	unsigned int i;
 	unsigned char buf[sizeof(long)+1];
 	long d;

 	a->type=V_ASN1_INTEGER;
-	if (a->length < (sizeof(long)+1))
+	if (a->length < (int)(sizeof(long)+1))
 		{
 		if (a->data != NULL)
 			OPENSSL_free(a->data);
@@ -362,7 +365,7 @@ long ASN1_INTEGER_get(ASN1_INTEGER *a)
 	else if (i != V_ASN1_INTEGER)
 		return -1;
 	
-	if (a->length > sizeof(long))
+	if (a->length > (int)sizeof(long))
 		{
 		/* hmm... a bit ugly */
 		return(0xffffffffL);
--- a/crypto/asn1/a_mbstr.c
+++ b/crypto/asn1/a_mbstr.c
@@ -145,14 +145,14 @@ int ASN1_mbstring_ncopy(ASN1_STRING **out, const unsigned char *in, int len,

 	if((minsize > 0) && (nchar < minsize)) {
 		ASN1err(ASN1_F_ASN1_MBSTRING_COPY, ASN1_R_STRING_TOO_SHORT);
-		sprintf(strbuf, "%ld", minsize);
+		BIO_snprintf(strbuf, sizeof strbuf, "%ld", minsize);
 		ERR_add_error_data(2, "minsize=", strbuf);
 		return -1;
 	}

 	if((maxsize > 0) && (nchar > maxsize)) {
 		ASN1err(ASN1_F_ASN1_MBSTRING_COPY, ASN1_R_STRING_TOO_LONG);
-		sprintf(strbuf, "%ld", maxsize);
+		BIO_snprintf(strbuf, sizeof strbuf, "%ld", maxsize);
 		ERR_add_error_data(2, "maxsize=", strbuf);
 		return -1;
 	}
@@ -296,7 +296,7 @@ static int in_utf8(unsigned long value, void *arg)

 static int out_utf8(unsigned long value, void *arg)
 {
-	long *outlen;
+	int *outlen;
 	outlen = arg;
 	*outlen += UTF8_putc(NULL, -1, value);
 	return 1;
--- a/crypto/asn1/a_object.c
+++ b/crypto/asn1/a_object.c
@@ -184,15 +184,15 @@ int i2a_ASN1_OBJECT(BIO *bp, ASN1_OBJECT *a)
 	if ((a == NULL) || (a->data == NULL))
 		return(BIO_write(bp,"NULL",4));
 	i=i2t_ASN1_OBJECT(buf,sizeof buf,a);
-	if (i > sizeof buf) i=sizeof buf;
+	if (i > (int)sizeof(buf)) i=sizeof buf;
 	BIO_write(bp,buf,i);
 	return(i);
 	}

-ASN1_OBJECT *d2i_ASN1_OBJECT(ASN1_OBJECT **a, unsigned char **pp,
+ASN1_OBJECT *d2i_ASN1_OBJECT(ASN1_OBJECT **a, const unsigned char **pp,
 	     long length)
 {
-	unsigned char *p;
+	const unsigned char *p;
 	long len;
 	int tag,xclass;
 	int inf,i;
@@ -219,11 +219,11 @@ err:
 		ASN1_OBJECT_free(ret);
 	return(NULL);
 }
-ASN1_OBJECT *c2i_ASN1_OBJECT(ASN1_OBJECT **a, unsigned char **pp,
+ASN1_OBJECT *c2i_ASN1_OBJECT(ASN1_OBJECT **a, const unsigned char **pp,
 	     long len)
 	{
 	ASN1_OBJECT *ret=NULL;
-	unsigned char *p;
+	const unsigned char *p;
 	int i;

 	/* only the ASN1_OBJECTs from the 'table' will have values
--- a/crypto/asn1/a_octet.c
+++ b/crypto/asn1/a_octet.c
@@ -66,6 +66,6 @@ ASN1_OCTET_STRING *ASN1_OCTET_STRING_dup(ASN1_OCTET_STRING *x)
 int ASN1_OCTET_STRING_cmp(ASN1_OCTET_STRING *a, ASN1_OCTET_STRING *b)
 { return M_ASN1_OCTET_STRING_cmp(a, b); }

-int ASN1_OCTET_STRING_set(ASN1_OCTET_STRING *x, unsigned char *d, int len)
+int ASN1_OCTET_STRING_set(ASN1_OCTET_STRING *x, const unsigned char *d, int len)
 { return M_ASN1_OCTET_STRING_set(x, d, len); }

--- a/crypto/asn1/a_set.c
+++ b/crypto/asn1/a_set.c
@@ -153,10 +153,10 @@ SetBlob
        return(r);
        }

-STACK *d2i_ASN1_SET(STACK **a, unsigned char **pp, long length,
+STACK *d2i_ASN1_SET(STACK **a, const unsigned char **pp, long length,
 	     char *(*func)(), void (*free_func)(void *), int ex_tag, int ex_class)
 	{
-	ASN1_CTX c;
+	ASN1_const_CTX c;
 	STACK *ret=NULL;

 	if ((a == NULL) || ((*a) == NULL))
--- a/crypto/asn1/a_sign.c
+++ b/crypto/asn1/a_sign.c
@@ -56,7 +56,7 @@
 * [including the GNU Public Licence.]
 */
 /* ====================================================================
- * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2003 The OpenSSL Project.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
@@ -204,9 +204,9 @@ int ASN1_sign(int (*i2d)(), X509_ALGOR *algor1, X509_ALGOR *algor2,
 err:
 	EVP_MD_CTX_cleanup(&ctx);
 	if (buf_in != NULL)
-		{ memset((char *)buf_in,0,(unsigned int)inl); OPENSSL_free(buf_in); }
+		{ OPENSSL_cleanse((char *)buf_in,(unsigned int)inl); OPENSSL_free(buf_in); }
 	if (buf_out != NULL)
-		{ memset((char *)buf_out,0,outll); OPENSSL_free(buf_out); }
+		{ OPENSSL_cleanse((char *)buf_out,outll); OPENSSL_free(buf_out); }
 	return(outl);
 	}

@@ -229,10 +229,11 @@ int ASN1_item_sign(const ASN1_ITEM *it, X509_ALGOR *algor1, X509_ALGOR *algor2,
 		else
 			a=algor2;
 		if (a == NULL) continue;
-                if (type->pkey_type == NID_dsaWithSHA1)
+                if (type->pkey_type == NID_dsaWithSHA1 ||
+			type->pkey_type == NID_ecdsa_with_SHA1)
 			{
-			/* special case: RFC 2459 tells us to omit 'parameters'
-			 * with id-dsa-with-sha1 */
+			/* special case: RFC 3279 tells us to omit 'parameters'
+			 * with id-dsa-with-sha1 and ecdsa-with-SHA1 */
 			ASN1_TYPE_free(a->parameter);
 			a->parameter = NULL;
 			}
@@ -287,8 +288,8 @@ int ASN1_item_sign(const ASN1_ITEM *it, X509_ALGOR *algor1, X509_ALGOR *algor2,
 err:
 	EVP_MD_CTX_cleanup(&ctx);
 	if (buf_in != NULL)
-		{ memset((char *)buf_in,0,(unsigned int)inl); OPENSSL_free(buf_in); }
+		{ OPENSSL_cleanse((char *)buf_in,(unsigned int)inl); OPENSSL_free(buf_in); }
 	if (buf_out != NULL)
-		{ memset((char *)buf_out,0,outll); OPENSSL_free(buf_out); }
+		{ OPENSSL_cleanse((char *)buf_out,outll); OPENSSL_free(buf_out); }
 	return(outl);
 	}
--- a/crypto/asn1/a_strex.c
+++ b/crypto/asn1/a_strex.c
@@ -279,13 +279,13 @@ static int do_dump(unsigned long lflags, char_io *io_ch, void *arg, ASN1_STRING
 * otherwise it is the number of bytes per character
 */

-const static char tag2nbyte[] = {
+const static signed char tag2nbyte[] = {
 	-1, -1, -1, -1, -1,	/* 0-4 */
 	-1, -1, -1, -1, -1,	/* 5-9 */
 	-1, -1, 0, -1,		/* 10-13 */
 	-1, -1, -1, -1,		/* 15-17 */
 	-1, 1, 1,		/* 18-20 */
-	-1, 1, -1,-1,		/* 21-24 */
+	-1, 1, 1, 1,		/* 21-24 */
 	-1, 1, -1,		/* 25-27 */
 	4, -1, 2		/* 28-30 */
 };
--- a/crypto/asn1/a_strnid.c
+++ b/crypto/asn1/a_strnid.c
@@ -143,7 +143,7 @@ ASN1_STRING *ASN1_STRING_set_by_NID(ASN1_STRING **out, const unsigned char *in,
 /* Now the tables and helper functions for the string table:
 */

-/* size limits: this stuff is taken straight from RFC2459 */
+/* size limits: this stuff is taken straight from RFC3280 */

 #define ub_name				32768
 #define ub_common_name			64
@@ -153,6 +153,8 @@ ASN1_STRING *ASN1_STRING_set_by_NID(ASN1_STRING **out, const unsigned char *in,
 #define ub_organization_unit_name	64
 #define ub_title			64
 #define ub_email_address		128
+#define ub_serial_number		64
+

 /* This table must be kept in NID order */

@@ -170,9 +172,11 @@ static ASN1_STRING_TABLE tbl_standard[] = {
 {NID_givenName,			1, ub_name, DIRSTRING_TYPE, 0},
 {NID_surname,			1, ub_name, DIRSTRING_TYPE, 0},
 {NID_initials,			1, ub_name, DIRSTRING_TYPE, 0},
+{NID_serialNumber,		1, ub_serial_number, B_ASN1_PRINTABLESTRING, STABLE_NO_MASK},
 {NID_friendlyName,		-1, -1, B_ASN1_BMPSTRING, STABLE_NO_MASK},
 {NID_name,			1, ub_name, DIRSTRING_TYPE, 0},
 {NID_dnQualifier,		-1, -1, B_ASN1_PRINTABLESTRING, STABLE_NO_MASK},
+{NID_domainComponent,		1, -1, B_ASN1_IA5STRING, STABLE_NO_MASK},
 {NID_ms_csp_name,		-1, -1, B_ASN1_BMPSTRING, STABLE_NO_MASK}
 };

@@ -249,4 +253,38 @@ static void st_free(ASN1_STRING_TABLE *tbl)
 	if(tbl->flags & STABLE_FLAGS_MALLOC) OPENSSL_free(tbl);
 }

+
 IMPLEMENT_STACK_OF(ASN1_STRING_TABLE)
+
+#ifdef STRING_TABLE_TEST
+
+main()
+{
+	ASN1_STRING_TABLE *tmp;
+	int i, last_nid = -1;
+
+	for (tmp = tbl_standard, i = 0;
+		i < sizeof(tbl_standard)/sizeof(ASN1_STRING_TABLE); i++, tmp++)
+		{
+			if (tmp->nid < last_nid)
+				{
+				last_nid = 0;
+				break;
+				}
+			last_nid = tmp->nid;
+		}
+
+	if (last_nid != 0)
+		{
+		printf("Table order OK\n");
+		exit(0);
+		}
+
+	for (tmp = tbl_standard, i = 0;
+		i < sizeof(tbl_standard)/sizeof(ASN1_STRING_TABLE); i++, tmp++)
+			printf("Index %d, NID %d, Name=%s\n", i, tmp->nid,
+							OBJ_nid2ln(tmp->nid));
+
+}
+
+#endif
--- a/Show More
+++ b/Show More