Free up parsed X509_NAME structure if the CertificateRequest message
contains excess data.
The security impact is considered insignificant. This is a client side
only leak and a large number of connections to malicious servers would
be needed to have a significant impact.
This was found by libFuzzer.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>
* Perform ALPN after the SNI callback; the SSL_CTX may change due to
that processing
* Add flags to indicate that we actually sent ALPN, to properly error
out if unexpectedly received.
* document ALPN functions
* unit tests
Backport of commit 817cd0d52f
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
If a call to EVP_DecryptUpdate fails then a memory leak could occur.
Ensure that the memory is freed appropriately.
Issue reported by Guido Vranken.
Reviewed-by: Richard Levitte <levitte@openssl.org>
SSLv2 should be off by default. You can only turn it on if you have called
SSL_CTX_clear_options(SSL_OP_NO_SSLv2) or
SSL_clear_options(SSL_OP_NO_SSLv2). You should not be able to inadvertantly
turn it on again via SSL_CONF without having done that first.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
SSLv2 is by default disabled at build-time. Builds that are not
configured with "enable-ssl2" will not support SSLv2. Even if
"enable-ssl2" is used, users who want to negotiate SSLv2 via the
version-flexible SSLv23_method() will need to explicitly call either
of:
SSL_CTX_clear_options(ctx, SSL_OP_NO_SSLv2);
or
SSL_clear_options(ssl, SSL_OP_NO_SSLv2);
as appropriate. Even if either of those is used, or the application
explicitly uses the version-specific SSLv2_method() or its client
or server variants, SSLv2 ciphers vulnerable to exhaustive search
key recovery have been removed. Specifically, the SSLv2 40-bit
EXPORT ciphers, and SSLv2 56-bit DES are no longer available.
Mitigation for CVE-2016-0800
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Previous commit f73c737c7 attempted to "fix" a problem with the way
SSL_shutdown() behaved whilst in mid-handshake. The original behaviour had
SSL_shutdown() return immediately having taken no action if called mid-
handshake with a return value of 1 (meaning everything was shutdown
successfully). In fact the shutdown has not been successful.
Commit f73c737c7 changed that to send a close_notify anyway and then
return. This seems to be causing some problems for some applications so
perhaps a better (much simpler) approach is revert to the previous
behaviour (no attempt at a shutdown), but return -1 (meaning the shutdown
was not successful).
This also fixes a bug where SSL_shutdown always returns 0 when shutdown
*very* early in the handshake (i.e. we are still using SSLv23_method).
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Modified version of the commit ffaef3f15 in the master branch by Stephen
Henson. This makes the SSL_OP_SINGLE_DH_USE option a no-op and always
generates a new DH key for every handshake regardless.
CVE-2016-0701 (fix part 2 or 2)
Issue reported by Antonio Sanso
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Based on patch by: Nimrod Aviram <nimrod.aviram@gmail.com>
CVE-2015-3197
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Calling SSL_shutdown while in init previously gave a "1" response, meaning
everything was successfully closed down (even though it wasn't). Better is
to send our close_notify, but fail when trying to receive one.
The problem with doing a shutdown while in the middle of a handshake is
that once our close_notify is sent we shouldn't really do anything else
(including process handshake/CCS messages) until we've received a
close_notify back from the peer. However the peer might send a CCS before
acting on our close_notify - so we won't be able to read it because we're
not acting on CCS messages!
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Error in the definition of the macro SSL_set1_sigalgs(ctx, slist,
slistlen): the third parameter 'slistlen' not used in the substitution
code; used 'clistlen' instead. As a result of this, compilation error
occurs when any application uses this macro.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
It makes no sense to call the OCSP status callback if we are resuming a
session because no certificates will be sent.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
If a server sends the status_request extension then it may choose
to send the CertificateStatus message. However this is optional.
We were treating it as mandatory and the connection was failing.
Thanks to BoringSSL for reporting this issue.
RT#4120
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Fix some more URLs mangled by indent in the reformat. These ones don't exist
in master so we have a separate commit. Based on a patch supplied by Arnaud
Lacombe <al@aerilon.ca>
Reviewed-by: Richard Levitte <levitte@openssl.org>
A BIO_flush call in the DTLS code was not correctly setting the |rwstate|
variable to SSL_WRITING. This means that SSL_get_error() will not return
SSL_ERROR_WANT_WRITE in the event of an IO retry.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 67f60be8c9)
If using DTLS and NBIO then if a second or subsequent handshake message
fragment hits a retry, then the retry attempt uses the wrong fragment
offset value. This commit restores the fragment offset from the last
attempt.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 2ad226e88b)
If the call to OBJ_find_sigid_by_algs fails to find the relevant NID then
we should set the NID to NID_undef.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 330dcb09b2)
The feature_test_macros(7) manual tells us that _BSD_SOURCE is
deprecated since glibc 2.20 and that the compiler will warn about it
being used, unless _DEFAULT_SOURCE is defined as well.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit f9fd35248c)
In the DTLS ClientHello processing the return value is stored in |ret| which
by default is -1. |ret| is only updated to a positive value once we are past
all points where we could hit an error. We wish to return 1 on success or 2
on success *and* we have validated the DTLS cookie. Previously on successful
validation of the cookie we were setting |ret| to -2, and then once we were
past all error points we set |ret = -ret|. This is non-obvious behaviour and
could be error prone. This commit tries to make this a bit more intuitive.
Reviewed-by: Andy Polyakov <appro@openssl.org>
If somewhere in SSL_new() there is a memory allocation failure, ssl3_free() can
get called with s->s3 still being NULL.
Patch also provided by Willy Tarreau <wtarreau@haproxy.com>
Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Viktor Dukhovni <openssl-users@dukhovni.org>
(cherry picked from commit 3e7bd2ce0b16f8611298175d6dc7cb35ee06ea6d)
Though the callers check the function return value and ignore the
size_t output argument on failure, it is still often not ideal to
store -1 in a size_t on error. That might signal an unduly large
buffer. Instead set the size_t to 0, to indicate no space.
Reviewed-by: Richard Levitte <levitte@openssl.org>
There are lots of calls to EVP functions from within libssl There were
various places where we should probably check the return value but don't.
This adds these checks.
Reviewed-by: Richard Levitte <levitte@openssl.org>
If a DTLS client that does not support secure renegotiation connects to an
OpenSSL DTLS server then, by default, renegotiation is disabled. If a
server application attempts to initiate a renegotiation then OpenSSL is
supposed to prevent this. However due to a discrepancy between the TLS and
DTLS code, the server sends a HelloRequest anyway in DTLS.
This is not a security concern because the handshake will still fail later
in the process when the client responds with a ClientHello.
Reviewed-by: Tim Hudson <tjh@openssl.org>
In DTLS if an IO retry occurs during writing of a fragmented ClientHello
then we can end up reseting the finish mac variables on the retry, which
causes a handshake failure. We should only reset on the first attempt not
on retries.
Thanks to BoringSSL for reporting this issue.
RT#4119
Reviewed-by: Tim Hudson <tjh@openssl.org>
The function tls1_get_curvelist() has an explicit check to see if s->cert
is NULL or not. However the check appears *after* calling the tls1_suiteb
macro which derefs s->cert. In reality s->cert can never be NULL because
it is created in SSL_new(). If the malloc fails then the SSL_new call fails
and no SSL object is created.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 6329b6092b)
Conflicts:
ssl/t1_lib.c
During work on a larger change in master a number of locations were
identified where return value checks were missing. This backports the
relevant fixes.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Some extension handling functions were passing in a pointer to the start
of the data, plus the length in order to calculate the end, rather than
just passing in the end to start with. This change makes things a little
more readable.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
RFC 5077 section 3.3 says: If the server determines that it does not
want to include a ticket after it has included the SessionTicket
extension in the ServerHello, then it sends a zero-length ticket in the
NewSessionTicket handshake message.
Previously the client would fail upon attempting to allocate a
zero-length buffer. Now, we have the client ignore the empty ticket and
keep the existing session.
Reviewed-by: Matt Caswell <matt@openssl.org>
