and instead use the value provided by the underlying BIO. Also provide some
new DTLS_CTRLs so that the library user can set the mtu without needing to
know this constant. These new DTLS_CTRLs provide the capability to set the
link level mtu to be used (i.e. including this IP/UDP overhead). The previous
DTLS_CTRLs required the library user to subtract this overhead first.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 59669b6abf620d1ed2ef4d1e2df25c998b89b64d)
Conflicts:
ssl/d1_both.c
used with no explanation. Some of this was introduced as part of RT#1929. The
value 28 is the length of the IP header (20 bytes) plus the UDP header (8
bytes). However use of this constant is incorrect because there may be
instances where a different value is needed, e.g. an IPv4 header is 20 bytes
but an IPv6 header is 40. Similarly you may not be using UDP (e.g. SCTP).
This commit introduces a new BIO_CTRL that provides the value to be used for
this mtu "overhead". It will be used by subsequent commits.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 0d3ae34df573f477b6b1aaf614d52dcdfcff5fce)
mtu that we have received is not less than the minimum. If its less it uses the
minimum instead. The second call to query the mtu does not do that, but
instead uses whatever comes back. We have seen an instance in RT#3592 where we
have got an unreasonably small mtu come back. This commit makes both query
checks consistent.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 6abb0d1f8e702a0daa9c32b8021d01eda0483018)
automatically updated, and we should use the one provided instead.
Unfortunately there are a couple of locations where this is not respected.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 001235778a6e9c645dc0507cad6092d99c9af8f5)
RT#3592 provides an instance where the OPENSSL_assert that this commit
replaces can be hit. I was able to recreate this issue by forcing the
underlying BIO to misbehave and come back with very small mtu values. This
happens the second time around the while loop after we have detected that the
MTU has been exceeded following the call to dtls1_write_bytes.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit cf75017bfd60333ff65edf9840001cd2c49870a3)
Previously, state variant was not advanced, which resulted in state
being stuck in the st1 variant (usually "_A").
This broke certificate callback retry logic when accepting connections
that were using SSLv2 ClientHello (hence reusing the message), because
their state never advanced to SSL3_ST_SR_CLNT_HELLO_C variant required
for the retry code path.
Reported by Yichun Zhang (agentzh).
Signed-off-by: Piotr Sikora <piotr@cloudflare.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
The current documentation contains a bunch of spelling and grammar mistakes. I also
found it hard to understand some paragraphs, so here is my attempt to improve its
readability.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 03b637a730e4a298c360cc143de7564060c06324)
Workaround for NetWare CodeWarrior compiler which doesn't properly lookup
includes when in same directory as the C file which includes it.
PR#3569
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 333fad9f2de1dea99552fcb424b312ca1a390f85)
Minor changes made by Matt Caswell
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
(cherry picked from commit 648495864513da788246f9b75dbbbce0614ed5e8)
Minor changes made by Matt Caswell.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
(cherry picked from commit f281b8df704ce0123fa2193f2890a25da1756528)
Minor changes made by Matt Caswell.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
(cherry picked from commit 34890ac18eb5ee7bffe9d460480164e1546b491e)
When using the -xcert option to test certificate validity print out
if we pass Suite B compliance. We print out "not tested" if we aren't
in Suite B mode.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 7d4cdededc371854eb36e773ed18204593e994e1)
the session's version (server).
See also BoringSSL's commit bdf5e72f50e25f0e45e825c156168766d8442dde.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
(cherry picked from commit 9e189b9dc10786c755919e6792e923c584c918a1)
ECDH_compute_key is silently ignored and the KDF is run on duff data
Thanks to github user tomykaira for the suggested fix.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
(cherry picked from commit 8d02bebddf4b69f7f260adfed4be4f498dcbd16c)
once the ChangeCipherSpec message is received. Previously, the server would
set the flag once at SSL3_ST_SR_CERT_VRFY and again at SSL3_ST_SR_FINISHED.
This would allow a second CCS to arrive and would corrupt the server state.
(Because the first CCS would latch the correct keys and subsequent CCS
messages would have to be encrypted, a MitM attacker cannot exploit this,
though.)
Thanks to Joeri de Ruiter for reporting this issue.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit e94a6c0ede623960728415b68650a595e48f5a43)
The server must send a NewSessionTicket message if it advertised one
in the ServerHello, so make a missing ticket message an alert
in the client.
An equivalent change was independently made in BoringSSL, see commit
6444287806d801b9a45baf1f6f02a0e3a16e144c.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit de2c7504ebd4ec15334ae151a31917753468f86f)
The client sends a session ID with the session ticket, and uses
the returned ID to detect resumption, so we do not need to peek
at handshake messages: s->hit tells us explicitly if we're resuming.
An equivalent change was independently made in BoringSSL, see commit
407886f589cf2dbaed82db0a44173036c3bc3317.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 980bc1ec6114f5511b20c2e6ca741e61a39b99d6)
Conflicts:
ssl/s3_clnt.c
The same change was independently made in BoringSSL, see commit
9eaeef81fa2d4fd6246dc02b6203fa936a5eaf67
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 7b3ba508af5c86afe43e28174aa3c53a0a24f4d9)
This ensures that it's zeroed even if the SSL object is reused
(as in ssltest.c). It also ensures that it applies to DTLS, too.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit a06cd5d056c6a5b1d161786873e21a5e53d554d8)
When no-ssl3 is set only make SSLv3 disabled by default. Retain -ssl3
options for s_client/s_server/ssltest.
When no-ssl3-method is set SSLv3_*method() is removed and all -ssl3
options.
We should document this somewhere, e.g. wiki, FAQ or manual page.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit 3881d8106df732fc433d30446625dfa2396da42d)
If no keyfile has been specified use the certificate file instead.
Fix typo: we need to check the chain is not NULL, not the chain file.
Reviewed-by: Matt Caswell <matt@openssl.org>
The supported signature algorithms extension needs to be processed before
the certificate to use is decided and before a cipher is selected (as the
set of shared signature algorithms supported may impact the choice).
Reviewed-by: Matt Caswell <matt@openssl.org>
Don't attempt to access msg structure if recvmsg returns an error.
PR#3483
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 012aa9ec76b158179b4de44bb5de8b8472045eac)
If the hash or public key algorithm is "undef" the signature type
will receive special handling and shouldn't be included in the
cross reference table.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 55f7fb8848b6e4bec291724a479e1580d6f407d6)
Out is the buffer which needs to contain at least inl + cipher_block_size - 1 bytes. Outl
is just an int*.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit 5211e094dec9486a540ac480f345df1a8d2b2862)
This doesn't really fix the datarace but changes it so it can only happens
once. This isn't really a problem since we always just set it to the same
value. We now just stop writing it after the first time.
PR3584, https://bugs.debian.org/534534
Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
