indent will not alter them when reformatting comments
(cherry picked from commit 1d97c8435171a7af575f73c526d79e1ef0ee5960)
Conflicts:
crypto/bn/bn_lcl.h
crypto/bn/bn_prime.c
crypto/engine/eng_all.c
crypto/rc4/rc4_utl.c
crypto/sha/sha.h
ssl/kssl.c
ssl/t1_lib.c
Reviewed-by: Tim Hudson <tjh@openssl.org>
ssl3_setup_buffers or pqueue_insert fail. The former will fail if there is a
malloc failure, whilst the latter will fail if attempting to add a duplicate
record to the queue. This should never happen because duplicate records should
be detected and dropped before any attempt to add them to the queue.
Unfortunately records that arrive that are for the next epoch are not being
recorded correctly, and therefore replays are not being detected.
Additionally, these "should not happen" failures that can occur in
dtls1_buffer_record are not being treated as fatal and therefore an attacker
could exploit this by sending repeated replay records for the next epoch,
eventually causing a DoS through memory exhaustion.
Thanks to Chris Mueller for reporting this issue and providing initial
analysis and a patch. Further analysis and the final patch was performed by
Matt Caswell from the OpenSSL development team.
CVE-2015-0206
Reviewed-by: Dr Stephen Henson <steve@openssl.org>
(cherry picked from commit 652ff0f4796eecd8729b4690f2076d1c7ccb2862)
Fix to prevent use of DH client certificates without sending
certificate verify message.
If we've used a client certificate to generate the premaster secret
ssl3_get_client_key_exchange returns 2 and ssl3_get_cert_verify is
never called.
We can only skip the certificate verify message in
ssl3_get_cert_verify if the client didn't send a certificate.
Thanks to Karthikeyan Bhargavan for reporting this issue.
CVE-2015-0205
Reviewed-by: Matt Caswell <matt@openssl.org>
of the crash due to p being NULL. Steve's fix prevents this situation from
occuring - however this is by no means obvious by looking at the code for
dtls1_get_record. This fix just makes things look a bit more sane.
Reviewed-by: Dr Stephen Henson <steve@openssl.org>
context was also inherited (matches that of the existing SSL_CTX).
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit ac8e9cbe14b59dacfe4ac52bc5ff06f8003e9b01)
OpenSSL clients would tolerate temporary RSA keys in non-export
ciphersuites. It also had an option SSL_OP_EPHEMERAL_RSA which
enabled this server side. Remove both options as they are a
protocol violation.
Thanks to Karthikeyan Bhargavan for reporting this issue.
(CVE-2015-0204)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Fix bug where an OpenSSL client would accept a handshake using an
ephemeral ECDH ciphersuites with the server key exchange message omitted.
Thanks to Karthikeyan Bhargavan for reporting this issue.
CVE-2014-3572
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit b15f8769644b00ef7283521593360b7b2135cb63)
Since SGC has been removed from OpenSSL 1.0.2 the
SSL3_FLAGS_SGC_RESTART_DONE is no longer used. However the #define is
retained for compatibility.
Reviewed-by: Matt Caswell <matt@openssl.org>
MS Server gated cryptography is obsolete and dates from the time of export
restrictions on strong encryption and is only used by ancient versions of
MSIE.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 63eab8a620944a990ab3985620966ccd9f48d681)
When parsing ClientHello clear any existing extension state from
SRP login and SRTP profile.
Thanks to Karthikeyan Bhargavan for reporting this issue.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 4f605ccb779e32a770093d687e0554e0bbb137d3)
Conflicts:
ssl/t1_lib.c
From BoringSSL
- Send an alert when the client key exchange isn't correctly formatted.
- Reject overly short RSA ciphertexts to avoid a (benign) out-of-bounds memory access.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(cherry picked from commit 4aecfd4d9f366c849c9627ab666d1b1addc024e6)
The client_version needs to be preserved for the RSA key exchange.
This change also means that renegotiation will, like TLS, repeat the old
client_version rather than advertise only the final version. (Either way,
version change on renego is not allowed.) This is necessary in TLS to work
around an SChannel bug, but it's not strictly necessary in DTLS.
(From BoringSSL)
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit ec1af3c4195c1dfecdd9dc7458850ab1b8b951e0)
Odd-length lists should be rejected everywhere upon parsing. Nevertheless,
be extra careful and add guards against off-by-one reads.
Also, drive-by replace inexplicable double-negation with an explicit comparison.
Reviewed-by: Matt Caswell <matt@openssl.org>
The Supported Elliptic Curves extension contains a vector of NamedCurves
of 2 bytes each, so the total length must be even. Accepting odd-length
lists was observed to lead to a non-exploitable one-byte out-of-bounds
read in the latest development branches (1.0.2 and master). Released
versions of OpenSSL are not affected.
Thanks to Felix Groebert of the Google Security Team for reporting this issue.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 33d5ba862939ff8db70a9e36fc9a326fab3e8d98)
we will support then dtls1_do_write can go into an infinite loop. This commit
fixes that.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit d3d9eef31661633f5b003a9e115c1822f79d1870)
at least the minimum or it will fail.
There were some instances in dtls1_query_mtu where the final mtu can end up
being less than the minimum, i.e. where the user has set an mtu manually. This
shouldn't be allowed. Also remove dtls1_guess_mtu that, despite having
logic for guessing an mtu, was actually only ever used to work out the minimum
mtu to use.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 1620a2e49c777f31f2ce57966ae74006b48ad759)
and instead use the value provided by the underlying BIO. Also provide some
new DTLS_CTRLs so that the library user can set the mtu without needing to
know this constant. These new DTLS_CTRLs provide the capability to set the
link level mtu to be used (i.e. including this IP/UDP overhead). The previous
DTLS_CTRLs required the library user to subtract this overhead first.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 59669b6abf620d1ed2ef4d1e2df25c998b89b64d)
Conflicts:
ssl/d1_both.c
mtu that we have received is not less than the minimum. If its less it uses the
minimum instead. The second call to query the mtu does not do that, but
instead uses whatever comes back. We have seen an instance in RT#3592 where we
have got an unreasonably small mtu come back. This commit makes both query
checks consistent.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 6abb0d1f8e702a0daa9c32b8021d01eda0483018)
automatically updated, and we should use the one provided instead.
Unfortunately there are a couple of locations where this is not respected.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 001235778a6e9c645dc0507cad6092d99c9af8f5)
RT#3592 provides an instance where the OPENSSL_assert that this commit
replaces can be hit. I was able to recreate this issue by forcing the
underlying BIO to misbehave and come back with very small mtu values. This
happens the second time around the while loop after we have detected that the
MTU has been exceeded following the call to dtls1_write_bytes.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit cf75017bfd60333ff65edf9840001cd2c49870a3)
Previously, state variant was not advanced, which resulted in state
being stuck in the st1 variant (usually "_A").
This broke certificate callback retry logic when accepting connections
that were using SSLv2 ClientHello (hence reusing the message), because
their state never advanced to SSL3_ST_SR_CLNT_HELLO_C variant required
for the retry code path.
Reported by Yichun Zhang (agentzh).
Signed-off-by: Piotr Sikora <piotr@cloudflare.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
