The internal |fmtstr| function used in processing a "%s" format string
in the BIO_*printf functions could overflow while calculating the length
of a string and cause an OOB read when printing very long strings.
Additionally the internal |doapr_outch| function can attempt to write to
an OOB memory location (at an offset from the NULL pointer) in the event of
a memory allocation failure. In 1.0.2 and below this could be caused where
the size of a buffer to be allocated is greater than INT_MAX. E.g. this
could be in processing a very long "%s" format string. Memory leaks can also
occur.
These issues will only occur on certain platforms where sizeof(size_t) >
sizeof(int). E.g. many 64 bit systems. The first issue may mask the second
issue dependent on compiler behaviour.
These problems could enable attacks where large amounts of untrusted data
is passed to the BIO_*printf functions. If applications use these functions
in this way then they could be vulnerable. OpenSSL itself uses these
functions when printing out human-readable dumps of ASN.1 data. Therefore
applications that print this data could be vulnerable if the data is from
untrusted sources. OpenSSL command line applications could also be
vulnerable where they print out ASN.1 data, or if untrusted data is passed
as command line arguments.
Libssl is not considered directly vulnerable. Additionally certificates etc
received via remote connections via libssl are also unlikely to be able to
trigger these issues because of message size limits enforced within libssl.
CVE-2016-0799
Issue reported by Guido Vranken.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The SRP user database lookup method SRP_VBASE_get_by_user had confusing
memory management semantics; the returned pointer was sometimes newly
allocated, and sometimes owned by the callee. The calling code has no
way of distinguishing these two cases.
Specifically, SRP servers that configure a secret seed to hide valid
login information are vulnerable to a memory leak: an attacker
connecting with an invalid username can cause a memory leak of around
300 bytes per connection.
Servers that do not configure SRP, or configure SRP but do not configure
a seed are not vulnerable.
In Apache, the seed directive is known as SSLSRPUnknownUserSeed.
To mitigate the memory leak, the seed handling in SRP_VBASE_get_by_user
is now disabled even if the user has configured a seed.
Applications are advised to migrate to SRP_VBASE_get1_by_user. However,
note that OpenSSL makes no strong guarantees about the
indistinguishability of valid and invalid logins. In particular,
computations are currently not carried out in constant time.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This is a partial revert of commit c8491de39 ("GH354: Memory leak fixes"),
which was cherry-picked from commit 55500ea7c in OpenSSL 1.1.
That commit introduced a change in behaviour which is a regression for
software implementing Microsoft Authenticode — which requires a PKCS#7
signature to be validated against explicit external data, even though
it's a non-detached signature with its own embedded data.
The is fixed differently in OpenSSL 1.1 by commit 6b2ebe433 ("Add
PKCS7_NO_DUAL_CONTENT flag"), but that approach isn't viable in the
1.0.2 stable branch, so just comment the offending check back out again.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Fix double free bug when parsing malformed DSA private keys.
Thanks to Adam Langley (Google/BoringSSL) for discovering this bug using
libFuzzer.
CVE-2016-0705
Reviewed-by: Emilia Käsper <emilia@openssl.org>
It's never problem if CRYPTO_ctr128_encrypt is called from EVP, because
buffer in question is always aligned within EVP_CIPHER_CTX structure.
RT#4218
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 5e4bbeb49fb6522d858703201b5adee9611e7b7b)
Also in X509_verify_cert() avoid using "i" not only as a loop
counter, but also as a trust outcome and as an error ordinal.
Finally, make sure that all "goto end" jumps return an error, with
"end" renamed to "err" accordingly.
[ The 1.1.0 version of X509_verify_cert() is major rewrite,
which addresses these issues in a more systemic way. ]
Reviewed-by: Rich Salz <rsalz@openssl.org>
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
(cherry picked from commit 8ab31975bacb9c907261088937d3aa4102e3af84)
Can't hurt and seems to prevent problems from some over-aggressive
(LTO?) compilers.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 98ab57644f44d2d83595c2d0f69138a284d6096b)
Add tests for have_precompute_mult for the optimised curves (nistp224,
nistp256 and nistp521) if present
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 8ce4e7e605577cb5818de068e2c6da60901cddba)
During precomputation if the group given is well known then we memcpy a
well known precomputation. However we go the wrong label in the code and
don't store the data properly. Consequently if we call have_precompute_mult
the data isn't there and we return 0.
RT#3600
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 615614c8862fb89dcf1551a4e113be0789dddf5f)
The function DH_check_pub_key() was missing some return value checks in
some calls to BN functions.
RT#4278
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit f5a12207eccfd814bde68b880a96910dfa25f164)
A new return value for DH_check_pub_key was recently added:
DH_CHECK_PUBKEY_INVALID. As this is a flag which can be ORed with other
return values it should have been set to the value 4 not 3.
RT#4278
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit cb389fe80462e20daba30835a9e86354451bd14f)
Following on from the previous commit, add a test to ensure that
DH_compute_key correctly fails if passed a bad y such that:
y^q (mod p) != 1
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Historically OpenSSL only ever generated DH parameters based on "safe"
primes. More recently (in version 1.0.2) support was provided for
generating X9.42 style parameter files such as those required for RFC
5114 support. The primes used in such files may not be "safe". Where an
application is using DH configured with parameters based on primes that
are not "safe" then an attacker could use this fact to find a peer's
private DH exponent. This attack requires that the attacker complete
multiple handshakes in which the peer uses the same DH exponent.
A simple mitigation is to ensure that y^q (mod p) == 1
CVE-2016-0701 (fix part 1 of 2)
Issue reported by Antonio Sanso.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
- bugfix: should not treat '--' as invalid domain substring.
- '-' should not be the first letter of a domain
Signed-off-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Found by clang scan-build.
Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Richard Levitte <levitte@openssl.org>
RT: #4184, MR: #1496
(cherry picked from commit 679d87515d23ca31491effdc264edc81c695a72a)
BIO_int_ctrl isn't made for the purpose BIO_get_conn_int_port used it
for.
This also changes BIO_C_GET_CONNECT to actually return the port
instead of assigning it to a pointer that was never returned back to
the caller.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Some URLs in the source code ended up getting mangled by indent. This fixes
it. Based on a patch supplied by Arnaud Lacombe <al@aerilon.ca>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Commit 2b0180c37fa6ffc48ee40caa831ca398b828e680 attempted to do this but
only hit one of many BN_mod_exp codepaths. Fix remaining variants and add
a test for each method.
Thanks to Hanno Boeck for reporting this issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
(cherry picked from commit d911097d7c93e4cfeab624b34d73fe51da158b69)
Avoid seg fault by checking mgf1 parameter is not NULL. This can be
triggered during certificate verification so could be a DoS attack
against a client or a server enabling client authentication.
Thanks to Loïc Jonas Etienne (Qnective AG) for discovering this bug.
CVE-2015-3194
Reviewed-by: Richard Levitte <levitte@openssl.org>
When parsing a combined structure pass a flag to the decode routine
so on error a pointer to the parent structure is not zeroed as
this will leak any additional components in the parent.
This can leak memory in any application parsing PKCS#7 or CMS structures.
CVE-2015-3195.
Thanks to Adam Langley (Google/BoringSSL) for discovering this bug using
libFuzzer.
PR#4131
Reviewed-by: Richard Levitte <levitte@openssl.org>
