Adjust VMS build to Unix build. Most of all, make it so the disabled

algorithms MD2 and RC5 don't get built.
Also, disable building the test apps in crypto/des and crypto/pkcs7, as
they have no support at all.

Reviewed-by: Tim Hudson <tjh@openssl.org>

crypto/crypto-lib.com

@@ -111,8 +111,8 @@ $ ET_WHIRLPOOL = "WHRLPOOL"
 $ IF ARCH .EQS. "VAX" THEN ET_WHIRLPOOL = ""
 $ ENCRYPT_TYPES = "Basic,"+ -
 		  "OBJECTS,"+ -
-		  "MD2,MD4,MD5,SHA,MDC2,HMAC,RIPEMD,"+ET_WHIRLPOOL+","+ -
+		  "MD4,MD5,SHA,MDC2,HMAC,RIPEMD,"+ET_WHIRLPOOL+","+ -
-		  "DES,AES,RC2,RC4,RC5,IDEA,BF,CAST,CAMELLIA,SEED,MODES,"+ -
+		  "DES,AES,RC2,RC4,IDEA,BF,CAST,CAMELLIA,SEED,MODES,"+ -
 		  "BN,EC,RSA,DSA,ECDSA,DH,ECDH,DSO,ENGINE,"+ -
 		  "BUFFER,BIO,STACK,LHASH,RAND,ERR,"+ -
 		  "EVP,EVP_2,EVP_3,ASN1,ASN1_2,PEM,X509,X509V3,"+ -
@@ -204,11 +204,18 @@ $ GOSUB CHECK_OPT_FILE
 $!
 $! Define The Different Encryption "library" Strings.
 $!
-$ APPS_DES = "DES/DES,CBC3_ENC"
+$!!! Test apps disabled, as they aren't supported at all,
-$ APPS_PKCS7 = "ENC/ENC;DEC/DEC;SIGN/SIGN;VERIFY/VERIFY,EXAMPLE"
+$!!! not even in the unix build
+$!!! APPS_DES = "DES/DES,CBC3_ENC"
+$!!! APPS_PKCS7 = "ENC/ENC;DEC/DEC;SIGN/SIGN;VERIFY/VERIFY,EXAMPLE"
 $
-$ LIB_ = "cryptlib,mem,mem_clr,mem_dbg,cversion,ex_data,cpt_err,"+ -
+$! These variables are ordered as the SDIRS variable from the top Makefile.org
-	"ebcdic,uid,o_time,o_str,o_dir,o_fips.c,o_init,fips_ers"
+$! The contents of these variables are copied from the LIBOBJ variable in the
+$! corresponding Makefile from each corresponding subdirectory, with .o stripped
+$! and spaces replaced with commas.
+$ LIB_ = "cryptlib,mem,mem_dbg,cversion,ex_data,cpt_err,ebcdic,"+ -
+	"uid,o_time,o_str,o_dir,o_fips.c,o_init,fips_ers,mem_clr"
+$ LIB_OBJECTS = "o_names,obj_dat,obj_lib,obj_err,obj_xref"
 $ LIB_MD2 = "md2_dgst,md2_one"
 $ LIB_MD4 = "md4_dgst,md4_one"
 $ LIB_MD5 = "md5_dgst,md5_one"
@@ -225,13 +232,13 @@ $ LIB_DES = "set_key,ecb_enc,cbc_enc,"+ -
 	"fcrypt,xcbc_enc,rpc_enc,cbc_cksm,"+ -
 	"ede_cbcm_enc,des_old,des_old2,read2pwd"
 $ LIB_RC2 = "rc2_ecb,rc2_skey,rc2_cbc,rc2cfb64,rc2ofb64"
-$ LIB_RC4 = "rc4_skey,rc4_enc,rc4_utl"
+$ LIB_RC4 = "rc4_enc,rc4_skey,rc4_utl"
 $ LIB_RC5 = "rc5_skey,rc5_ecb,rc5_enc,rc5cfb64,rc5ofb64"
 $ LIB_IDEA = "i_cbc,i_cfb64,i_ofb64,i_ecb,i_skey"
 $ LIB_BF = "bf_skey,bf_ecb,bf_enc,bf_cfb64,bf_ofb64"
 $ LIB_CAST = "c_skey,c_ecb,c_enc,c_cfb64,c_ofb64"
-$ LIB_CAMELLIA = "camellia,cmll_misc,cmll_ecb,cmll_cbc,cmll_ofb,"+ -
+$ LIB_CAMELLIA = "cmll_ecb,cmll_ofb,cmll_cfb,cmll_ctr,cmll_utl,"+ -
-	"cmll_cfb,cmll_ctr,cmll_utl"
+	"camellia,cmll_misc,cmll_cbc"
 $ LIB_SEED = "seed,seed_ecb,seed_cbc,seed_cfb,seed_ofb"
 $ LIB_MODES = "cbc128,ctr128,cts128,cfb128,ofb128,gcm128,"+ -
 	"ccm128,xts128"
@@ -264,24 +271,23 @@ $ LIB_ENGINE = "eng_err,eng_lib,eng_list,eng_init,eng_ctrl,"+ -
 	"eng_table,eng_pkey,eng_fat,eng_all,"+ -
 	"tb_rsa,tb_dsa,tb_ecdsa,tb_dh,tb_ecdh,tb_rand,tb_store,"+ -
 	"tb_cipher,tb_digest,tb_pkmeth,tb_asnmth,"+ -
-	"eng_openssl,eng_dyn,eng_cnf,eng_cryptodev,"+ -
+	"eng_openssl,eng_cnf,eng_dyn,eng_cryptodev,"+ -
 	"eng_rsax,eng_rdrand"
-$ LIB_AES = "aes_core,aes_misc,aes_ecb,aes_cbc,aes_cfb,aes_ofb,aes_ctr,"+ -
+$ LIB_AES = "aes_misc,aes_ecb,aes_cfb,aes_ofb,aes_ctr,aes_ige,aes_wrap,"+ -
-	"aes_ige,aes_wrap"
+	"aes_core,aes_cbc"
 $ LIB_BUFFER = "buffer,buf_str,buf_err"
 $ LIB_BIO = "bio_lib,bio_cb,bio_err,"+ -
 	"bss_mem,bss_null,bss_fd,"+ -
 	"bss_file,bss_sock,bss_conn,"+ -
 	"bf_null,bf_buff,b_print,b_dump,"+ -
-	"b_sock,bss_acpt,bf_nbio,bss_rtcp,bss_bio,bss_log,"+ -
+	"b_sock,bss_acpt,bf_nbio,bss_log,bss_bio,"+ -
 	"bss_dgram,"+ -
-	"bf_lbuf"
+	"bf_lbuf,bss_rtcp" ! The last two are VMS specific
 $ LIB_STACK = "stack"
 $ LIB_LHASH = "lhash,lh_stats"
 $ LIB_RAND = "md_rand,randfile,rand_lib,rand_err,rand_egd,"+ -
-	"rand_vms"
+	"rand_vms" ! The last one is VMS specific
 $ LIB_ERR = "err,err_all,err_prn"
-$ LIB_OBJECTS = "o_names,obj_dat,obj_lib,obj_err,obj_xref"
 $ LIB_EVP = "encode,digest,evp_enc,evp_key,evp_acnf,evp_cnf,"+ -
 	"e_des,e_bf,e_idea,e_des3,e_camellia,"+ -
 	"e_rc4,e_aes,names,e_seed,"+ -
@@ -345,7 +351,7 @@ $ LIB_TS = "ts_err,ts_req_utils,ts_req_print,ts_rsp_utils,ts_rsp_print,"+ -
 $ LIB_JPAKE = "jpake,jpake_err"
 $ LIB_SRP = "srp_lib,srp_vfy"
 $ LIB_STORE = "str_err,str_lib,str_meth,str_mem"
-$ LIB_CMAC = "cmac,cm_ameth.c,cm_pmeth"
+$ LIB_CMAC = "cmac,cm_ameth,cm_pmeth"
 $!
 $! Setup exceptional compilations
 $!

crypto/install-crypto.com

@@ -75,13 +75,13 @@ $!
 $ sdirs := , -
    'archd', -
    objects, -
-   md2, md4, md5, sha, mdc2, hmac, ripemd, whrlpool, -
+   md4, md5, sha, mdc2, hmac, ripemd, whrlpool, -
-   des, aes, rc2, rc4, rc5, idea, bf, cast, camellia, seed, -
+   des, aes, rc2, rc4, idea, bf, cast, camellia, seed, -
    bn, ec, rsa, dsa, ecdsa, dh, ecdh, dso, engine, -
    buffer, bio, stack, lhash, rand, err, -
    evp, asn1, pem, x509, x509v3, conf, txt_db, pkcs7, pkcs12, comp, ocsp, -
    ui, krb5, -
-   store, cms, pqueue, ts, jpake
+   cms, pqueue, ts, jpake, srp, store, cmac
 $!
 $ exheader_ := crypto.h, opensslv.h, ebcdic.h, symhacks.h, ossl_typ.h
 $ exheader_'archd' := opensslconf.h
@@ -139,6 +139,9 @@ $ exheader_cms := cms.h
 $ exheader_pqueue := pqueue.h
 $ exheader_ts := ts.h
 $ exheader_jpake := jpake.h
+$ exheader_srp := srp.h
+$ exheader_store := store.h
+$ exheader_cmac := cmac.h
 $ libs := ssl_libcrypto
 $!
 $ exe_dir := [-.'archd'.exe.crypto]

engines/makeengines.com

@@ -155,7 +155,7 @@ $   ENGINE_ = "engine_vector.mar"
 $   TV_OBJ_NAME = OBJ_DIR + F$PARSE(ENGINE_,,,"NAME","SYNTAX_ONLY") + ".OBJ"
 $   TV_OBJ = ",''TV_OBJ_NAME'"
 $ ENDIF
-$ ENGINE_4758CCA = "e_4758cca"
+$ ENGINE_4758cca = "e_4758cca"
 $ ENGINE_aep = "e_aep"
 $ ENGINE_atalla = "e_atalla"
 $ ENGINE_cswift = "e_cswift"

makevms.com

@@ -283,6 +283,7 @@ $ CONFIG_LOGICALS := AES,-
 		     MD4,-
 		     MD5,-
 		     MDC2,-
+		     NEXTPROTONEG,-
 		     OCSP,-
 		     PSK,-
 		     RC2,-
@@ -340,7 +341,12 @@ $ CONFIG_DISABLE_RULES := RIJNDAEL/AES;-
 			  DH/GOST;-
 			  /STATIC_ENGINE;-
 			  /KRB5;-
-			  /EC_NISTP_64_GCC_128
+			  /EC_NISTP_64_GCC_128;-
+			  /GMP;-
+			  /MD2;-
+			  /RC5;-
+			  /RFC3779;-
+			  /SCTP
 $ CONFIG_ENABLE_RULES := ZLIB_DYNAMIC/ZLIB;-
 			 /THREADS
 $
@@ -706,8 +712,8 @@ $!
 $ SDIRS := , -
    'ARCHD', -
    OBJECTS, -
-   MD2, MD4, MD5, SHA, MDC2, HMAC, RIPEMD, WHRLPOOL, -
+   MD4, MD5, SHA, MDC2, HMAC, RIPEMD, WHRLPOOL, -
-   DES, AES, RC2, RC4, RC5, IDEA, BF, CAST, CAMELLIA, SEED, MODES, -
+   DES, AES, RC2, RC4, IDEA, BF, CAST, CAMELLIA, SEED, MODES, -
    BN, EC, RSA, DSA, ECDSA, DH, ECDH, DSO, ENGINE, -
    BUFFER, BIO, STACK, LHASH, RAND, ERR, -
    EVP, ASN1, PEM, X509, X509V3, CONF, TXT_DB, PKCS7, PKCS12, -
@@ -819,8 +825,9 @@ $ @CRYPTO-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" -
 $!
 $! Build The [.xxx.EXE.CRYPTO]*.EXE Test Applications.
 $!  
-$ @CRYPTO-LIB APPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" -
+$!!! DISABLED, as these test programs lack any support
-   "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'" "''ZLIB'"
+$!!!$ @CRYPTO-LIB APPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" -
+$!!!   "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'" "''ZLIB'"
 $!
 $! Go Back To The Main Directory.
 $!

ssl/ssl-lib.com

@@ -213,11 +213,11 @@ $ ENDIF
 $!
 $! Define The Different SSL "library" Files.
 $!
-$ LIB_SSL = "s2_meth,s2_srvr,s2_clnt,s2_lib,s2_enc,s2_pkt,"+ -
+$ LIB_SSL = "s2_meth, s2_srvr, s2_clnt, s2_lib, s2_enc, s2_pkt,"+ -
-           "s3_meth,s3_srvr,s3_clnt,s3_lib,s3_enc,s3_pkt,s3_both,s3_cbc,"+ -
+	    "s3_meth, s3_srvr, s3_clnt, s3_lib, s3_enc, s3_pkt, s3_both, s3_cbc,"+ -
-	    "s23_meth,s23_srvr,s23_clnt,s23_lib,s23_pkt,"+ -
+	    "s23_meth,s23_srvr,s23_clnt,s23_lib,        s23_pkt,"+ -
-	    "t1_meth,t1_srvr,t1_clnt,t1_lib,t1_enc,"+ -
+	    "t1_meth, t1_srvr, t1_clnt, t1_lib, t1_enc,"+ -
-	    "d1_meth,d1_srvr,d1_clnt,d1_lib,d1_pkt,"+ -
+	    "d1_meth, d1_srvr, d1_clnt, d1_lib, d1_pkt,"+ -
 	    "d1_both,d1_enc,d1_srtp,"+ -
 	    "ssl_lib,ssl_err2,ssl_cert,ssl_sess,"+ -
 	    "ssl_ciph,ssl_stat,ssl_rsa,"+ -