Go to file
Martin Storsjö 67a9e73a7c Set the arch to armv7 by default when building for iOS
Otherwise it would build for the simulator by default, which
in most cases probably isn't what was intended.
2014-03-09 01:46:43 +02:00
build Set the arch to armv7 by default when building for iOS 2014-03-09 01:46:43 +02:00
codec Enable threading when building for iOS using the project files 2014-03-08 13:06:05 +02:00
res add the bitstreams 2014-02-26 00:26:12 -08:00
test Use the slice mode enum in BaseEncoderTest 2014-03-07 14:53:29 +02:00
testbin clean encode cfg files 2014-03-06 13:48:31 +08:00
.gitignore Automatically track per-file dependencies 2014-01-28 08:15:45 +02:00
.reviewboardrc ReviewBoard .rc file for rbt. 2014-01-06 13:14:04 -08:00
.travis.yml Don't install 32 bit zlib in travis builds 2014-02-24 17:47:46 +02:00
CODING_STYLE Rerun astyle on the C++ source files 2014-01-05 14:59:18 +02:00
CONTRIBUTORS Updated CONTRIBUTORS file 2013-12-27 08:16:48 -08:00
LICENSE Initial commit 2013-10-27 13:20:33 -07:00
Makefile Add separate install-static and install-shared targets 2014-03-07 15:10:46 +02:00
README.md Update the readme, indicating that ARMv7 NEON optimizations are available now 2014-03-07 14:10:09 +02:00
wels.def Support building DLLs with MSVC 2014-02-19 21:04:30 +02:00

OpenH264

OpenH264 is a codec library which supports H.264 encoding and decoding. It is suitable for use in real time applications such as WebRTC. See http://www.openh264.org/ for more details.

Encoder Features

  • Constrained Baseline Profile up to Level 5.2 (4096x2304)
  • Arbitrary resolution, not constrained to multiples of 16x16
  • Rate control with adaptive quantization, or constant quantization
  • Slice options: 1 slice per frame, N slices per frame, N macroblocks per slice, or N bytes per slice
  • Multiple threads automatically used for multiple slices
  • Temporal scalability up to 4 layers in a dyadic hierarchy
  • Spatial simulcast up to 4 resolutions from a single input
  • Long Term Reference (LTR) frames
  • Memory Management Control Operation (MMCO)
  • Reference picture list modification
  • Single reference frame for inter prediction
  • Multiple reference frames when using LTR and/or 3-4 temporal layers
  • Periodic and on-demand Instantaneous Decoder Refresh (IDR) frame insertion
  • Dynamic changes to bit rate, frame rate, and resolution
  • Annex B byte stream output
  • YUV 4:2:0 planar input

Decoder Features

  • Constrained Baseline Profile up to Level 5.2 (4096x2304)
  • Arbitrary resolution, not constrained to multiples of 16x16
  • Single thread for all slices
  • Long Term Reference (LTR) frames
  • Memory Management Control Operation (MMCO)
  • Reference picture list modification
  • Multiple reference frames when specified in Sequence Parameter Set (SPS)
  • Annex B byte stream input
  • YUV 4:2:0 planar output

OS Support

  • Windows 64-bit and 32-bit
  • Mac OS X 64-bit and 32-bit
  • Linux 64-bit and 32-bit
  • Android 32-bit
  • iOS 64-bit and 32-bit

Processor Support

  • Intel x86 optionally with MMX/SSE (no AVX yet, help is welcome)
  • ARMv7 optionally with NEON
  • Any architecture using C/C++ fallback functions

Building the Library

NASM needed to be installed for assembly code: workable version 2.07 or above, nasm can downloaded from http://www.nasm.us/

For Android Builds

To build for android platform, You need to install android sdk and ndk. You also need to export ANDROID_SDK/tools to PATH. On Linux, this can be done by

'export PATH=ANDROID_SDK/tools:$PATH'

The codec and demo can be built by

'make OS=android NDKROOT=ANDROID_NDK TARGET= ANDROID_TARGET'

Valid ANDROID_TARGET can be found in ANDROID_SDK/platforms, such as android-12. You can also set ARCH, NDKLEVEL, GCCVERSION according to your device and NDK version. ARCH specifies the architecture of android device. Currently only arm and x86 are supported, the default is arm. NDKLEVEL specifies android api level, the api level can be 12-19, the default is 12. GCCVERSION specifies which gcc in NDK is used, the default is 4.8.

For iOS Builds

You can build the libraries and demo applications using xcode project files located in codec/build/iOS/dec and codec/build/iOS/enc.

You can also build the libraries (but not the demo applications) using the make based build system from the command line. Build with

'make OS=ios ARCH=ARCH'

Valid values for ARCH are the normal iOS architecture names such as armv7, armv7s, arm64, and i386 and x86_64 for the simulator. Additionally, one might need to add 'SDK=X.Y' to the make command line in case the default SDK version isn't available. Another settable iOS specific parameter is SDK_MIN, specifying the minimum deployment target for the built library. For other details on building using make on the command line, see 'For All Platforms' below.

For Windows Builds

Our Windows builds use MinGW which can be found here - http://www.mingw.org/

To build with gcc, add the MinGW bin directory (e.g. /c/MinGW/bin) to your path and follow the 'For All Platforms' instructions below.

To build with Visual Studio you will need to set up your path to run cl.exe. The easiest way is to start MSYS from a developer command line session - http://msdn.microsoft.com/en-us/library/ms229859(v=vs.110).aspx If you need to do it by hand here is an example from a Windows 64bit install of VS2012:

export PATH="$PATH:/c/Program Files (x86)/Microsoft Visual Studio 11.0/VC/bin:/c/Program Files (x86)/Microsoft Visual Studio 11.0/Common7/IDE"

You will also need to set your INCLUDE and LIB paths to point to your VS and SDK installs. Something like this, again from Win64 with VS2012 (note the use of Windows-style paths here).

export INCLUDE="C:\Program Files (x86)\Microsoft Visual Studio 11.0\VC\include;C:\Program Files (x86)\Windows Kits\8.0\Include\um;C:\Program Files (x86)\Windows Kits\8.0\Include\shared" export LIB="C:\Program Files (x86)\Windows Kits\8.0\Lib\Win8\um\x86;C:\Program Files (x86)\Microsoft Visual Studio 11.0\VC\lib"

Then add 'OS=msvc' to the make line of the 'For All Platforms' instructions.

For All Platforms

From the main project directory: 'make' for automatically detecting 32/64bit and building accordingly 'make ENABLE64BIT=No' for 32bit builds 'make ENABLE64BIT=Yes' for 64bit builds 'make V=No' for a silent build (not showing the actual compiler commands)

The command line programs h264enc and h264dec will appear in the main project directory.

A shell script to run the command-line apps is in testbin/CmdLineExample.sh

Usage information can be found in testbin/CmdLineReadMe

Using the Source

codec - encoder, decoder, console (test app), build (makefile, vcproj) build - scripts for Makefile build system. test - GTest unittest files. testbin - autobuild scripts, test app config files res - yuv and bitstream test files

Known Issues

See the issue tracker on https://github.com/cisco/openh264/issues

  • Encoder errors when resolution exceeds 3840x2160
  • Encoder errors when compressed frame size exceeds half uncompressed size
  • Decoder errors when compressed frame size exceeds 1MB
  • Encoder RC requires frame skipping to be enabled to hit the target bitrate, if frame skipping is disabled the target bitrate may be exceeded

License

BSD, see LICENSE file for details.