generic-library/openh264
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
316f740630
openh264/Makefile

368 lines
12 KiB
Makefile
Raw Normal View History

Support building outside of the source tree This allows building two versions for different architectures at the same time, without the built files clobbering each other. This is very helpful when trying to track down differences between two build configurations. To build outside of the source tree, create the other directory to use for building (either outside of the openh264 directory, or as a subdirectory), enter that directory, and do "make -f path/to/openh264/Makefile".
2014-01-29 09:31:09 +01:00
SRC_PATH=$(word 1, $(dir $(MAKEFILE_LIST)))
vpath %.c $(SRC_PATH)
vpath %.cc $(SRC_PATH)
vpath %.cpp $(SRC_PATH)
vpath %.asm $(SRC_PATH)
vpath %.S $(SRC_PATH)
Include the version number and other info in the built DLL file
2015-04-20 10:08:59 +02:00
vpath %.rc $(SRC_PATH)
Use vpath instead of explicit $(SRC_PATH) for building .pc files out of tree
2015-05-28 23:10:45 +02:00
vpath %.pc.in $(SRC_PATH)
Support building outside of the source tree This allows building two versions for different architectures at the same time, without the built files clobbering each other. This is very helpful when trying to track down differences between two build configurations. To build outside of the source tree, create the other directory to use for building (either outside of the openh264 directory, or as a subdirectory), enter that directory, and do "make -f path/to/openh264/Makefile".
2014-01-29 09:31:09 +01:00
Consolidate BSD build to support NetBSD and OpenBSD as well
2015-09-12 21:32:00 +02:00
OS=$(shell uname | tr A-Z a-z | tr -d \\-[:digit:]. | sed -E 's/^(net|open|free)bsd/bsd/')
Attempt to detect OS arch(32/64 bit) on most platforms Attempt to automatically detect 32bit or 64bit OS architecture in Makefile, unless user has specified preference on the command line.
2014-01-28 08:05:36 +01:00
ARCH=$(shell uname -m)
First cut at new build system. Tested on Mac
2013-12-10 09:19:42 +01:00
LIBPREFIX=lib
LIBSUFFIX=a
Update the makefile generator to support .S arm assembly files These are built if ASM_ARCH is set to arm.
2014-02-26 13:31:52 +01:00
CCAS=$(CC)
Make the compiler/ar/linker file output parameters overrideable This is in preparation for allowing building using MSVC via makefiles.
2013-12-17 12:57:27 +01:00
CXX_O=-o $@
CXX_LINK_O=-o $@
Don't concatenate $@ to AR_OPTS The MSVC version of AR_OPTS already contains $@, in a very specific way. This fixes MSVC builds after c8bed8a9.
2015-06-26 12:55:15 +02:00
AR_OPTS=cr $@
Don't pass -L. to the MSVC linker This avoids warnings - this parameter isn't necessary on MSVC.
2014-07-02 11:31:55 +02:00
LINK_LOCAL_DIR=-L.
Allow overriding the command syntax for linking libraries
2014-01-10 13:19:05 +01:00
LINK_LIB=-l$(1)
Allow overriding the cflags for debug/optimization and for 32/64 bit
2013-12-27 23:00:32 +01:00
CFLAGS_OPT=-O3
CFLAGS_DEBUG=-g
Make BUILDTYPE=Release the default if no make parameters are specified This probably simplifies the default case for most users of the library, and reduces the risk of people accidentally trying to use an unoptimized build.
2014-01-23 14:03:15 +01:00
BUILDTYPE=Release
Add a make option for silencing the commands run Add "V=No" to the make command to silence the make output. This makes it easier to spot warnings or other unexpected messages in the build output.
2014-01-30 10:32:51 +01:00
V=Yes
Add a "make install" target
2014-01-27 13:54:47 +01:00
PREFIX=/usr/local
Make the -shared flag an overrideable variable
2014-02-19 10:50:45 +01:00
SHARED=-shared
Use .obj as suffix for object files on MSVC This avoids warnings when linking about "unrecognized source file type, object file assumed".
2014-03-18 10:21:46 +01:00
OBJ=o
build: Support DESTDIR Distribution rely on that to properly package software.
2015-01-06 22:24:51 +01:00
DESTDIR=
Make the static library directory configurable When running "make install" the destination of pkgconfig/openh264.pc and lib/libopenh264.a was hard coded to "lib". When building packages it might be required to change the install location of those files to the systems default library location (like lib64 or lib/x86_64-linux-gnu for example). This commit adds an additional make variable "LIBDIR_NAME" that allows it to change the destination directory for those files. Without setting LIBDIR_NAME the installation location is the same as before (lib).
2015-06-19 16:23:34 +02:00
LIBDIR_NAME=lib
Set a default SHAREDLIB_DIR in the main Makefile Only override it in the ones where the default isn't desired.
2014-12-01 13:28:45 +01:00
SHAREDLIB_DIR=$(PREFIX)/lib
Parameterize the project name and change it to openh264
2014-05-02 17:12:40 +02:00
PROJECT_NAME=openh264
Rollup of Gecko Media Plugin patches
2014-06-18 04:54:16 +02:00
MODULE_NAME=gmpopenh264
Use gmp-api branch Firefox39
2015-04-03 18:39:02 +02:00
GMP_API_BRANCH=Firefox39
Use CCASFLAGS when assembling .S sources This allows overriding whether all of CFLAGS should be passed when assembling.
2014-05-08 13:02:53 +02:00
CCASFLAGS=$(CFLAGS)
Include -lstdc++ under Libs.private in the pkg-config file This allows linking statically to the library, by passing --static to pkg-config.
2015-01-02 20:54:21 +01:00
STATIC_LDFLAGS=-lstdc++
Make gtest support conditional
2013-12-12 05:24:55 +01:00
change API for slicing part for easier usage (the UseLoadBalancing flag is still under working)
2015-11-10 18:50:06 +01:00
VERSION=1.6
SHAREDLIBVERSION=2
Group version related makefile variables together
2015-04-22 08:14:47 +02:00
Support building outside of the source tree This allows building two versions for different architectures at the same time, without the built files clobbering each other. This is very helpful when trying to track down differences between two build configurations. To build outside of the source tree, create the other directory to use for building (either outside of the openh264 directory, or as a subdirectory), enter that directory, and do "make -f path/to/openh264/Makefile".
2014-01-29 09:31:09 +01:00
ifeq (,$(wildcard $(SRC_PATH)gmp-api))
Rollup of Gecko Media Plugin patches
2014-06-18 04:54:16 +02:00
HAVE_GMP_API=No
else
HAVE_GMP_API=Yes
endif
Support building outside of the source tree This allows building two versions for different architectures at the same time, without the built files clobbering each other. This is very helpful when trying to track down differences between two build configurations. To build outside of the source tree, create the other directory to use for building (either outside of the openh264 directory, or as a subdirectory), enter that directory, and do "make -f path/to/openh264/Makefile".
2014-01-29 09:31:09 +01:00
ifeq (,$(wildcard $(SRC_PATH)gtest))
Make gtest support conditional
2013-12-12 05:24:55 +01:00
HAVE_GTEST=No
else
Add gtest support
2013-12-12 03:56:52 +01:00
HAVE_GTEST=Yes
Make gtest support conditional
2013-12-12 05:24:55 +01:00
endif
First cut at new build system. Tested on Mac
2013-12-10 09:19:42 +01:00
Add support for assembly on linux as well as multiple configs
2013-12-10 11:57:32 +01:00
# Configurations
ifeq ($(BUILDTYPE), Release)
Allow overriding the cflags for debug/optimization and for 32/64 bit
2013-12-27 23:00:32 +01:00
CFLAGS += $(CFLAGS_OPT)
Add support for assembly on linux as well as multiple configs
2013-12-10 11:57:32 +01:00
USE_ASM = Yes
Add DEBUGSYMBOLS option for makefile under release mode
2015-12-04 02:15:27 +01:00
ifeq ($(DEBUGSYMBOLS), True)
CFLAGS += -g
CXXFLAGS += -g
endif
Add support for assembly on linux as well as multiple configs
2013-12-10 11:57:32 +01:00
else
Don't override the externally set CFLAGS variable in debug mode This is similar to how it is done in release mode already. The fact that this behaviour differed between release and debug can be traced back to commit cf92e8d6.
2015-01-16 12:49:52 +01:00
CFLAGS += $(CFLAGS_DEBUG)
Add support for assembly on linux as well as multiple configs
2013-12-10 11:57:32 +01:00
USE_ASM = No
endif
resolve conflict
2014-01-03 07:49:45 +01:00
Add ASan support
2014-01-09 19:25:15 +01:00
ifeq ($(USE_ASAN), Yes)
CFLAGS += -fsanitize=address
LDFLAGS += -fsanitize=address
endif
add stripped lib for firefox and modify README for the usage fo DEBUGSYMBOLS
2015-12-08 02:52:03 +01:00
STRIP_FLAGS := -S
ifeq (linux, $((OS)))
STRIP_FLAGS := -g
endif
Move the "all" make target before including any platform files This makes sure that "all" stays as the default make target even if platform makefiles add extra rules.
2015-04-22 08:20:31 +02:00
# Make sure the all target is the first one
all: libraries binaries
Support building outside of the source tree This allows building two versions for different architectures at the same time, without the built files clobbering each other. This is very helpful when trying to track down differences between two build configurations. To build outside of the source tree, create the other directory to use for building (either outside of the openh264 directory, or as a subdirectory), enter that directory, and do "make -f path/to/openh264/Makefile".
2014-01-29 09:31:09 +01:00
include $(SRC_PATH)build/platform-$(OS).mk
Include the platform makefile before adding defines for x86 asm This fixes building with BUILDTYPE=Release on OS X.
2013-12-13 12:50:04 +01:00
add an echo-plugin-name target
2015-11-18 12:47:39 +01:00
MODULE := $(LIBPREFIX)$(MODULE_NAME).$(SHAREDLIBSUFFIX)
Add support for assembly on linux as well as multiple configs
2013-12-10 11:57:32 +01:00
Don't overwrite the git-tracked version.h When generating a new version of the header, that includes the actual git hash, don't overwrite the file that is tracked by git. Instead create a new file, and include this only if the build system indicates that it exists (by setting a define). This allows the untouched source tree to be built from within an IDE even if make has not been run. This reduces the hassle with a file that needs to be ignored in the git configuration. The downside is that the generated file isn't used if building from within an IDE, if the header has been updated by calling make before (since the IDE configuration doesn't know whether the user actually has run make). Since users of the IDE might not build via make in the command line at all (in the same source checkout at least), this should not be an issue in practice. The previous way things worked, the version hash (generated by make) when used in an IDE could actually be outdated and misleading.
2014-12-16 11:18:54 +01:00
CFLAGS += -DGENERATED_VERSION_HEADER
Add support for assembly on linux as well as multiple configs
2013-12-10 11:57:32 +01:00
LDFLAGS +=
add code coverage test. use lcov & gcov to generate coverage report use genhtml to generate html pages on ubuntu: sudo apt-get install lcov will install these two cmd lines.
2014-03-13 09:38:33 +01:00
ifeq (Yes, $(GCOV))
CFLAGS += -fprofile-arcs -ftest-coverage
LDFLAGS += -lgcov
endif
Add support for assembly on linux as well as multiple configs
2013-12-10 11:57:32 +01:00
#### No user-serviceable parts below this line
Add a make option for silencing the commands run Add "V=No" to the make command to silence the make output. This makes it easier to spot warnings or other unexpected messages in the build output.
2014-01-30 10:32:51 +01:00
ifneq ($(V),Yes)
Clean up spacing in the quiet rules in the makefile
2015-04-22 08:23:08 +02:00
QUIET_CXX = @printf "CXX\t$@\n";
QUIET_CC = @printf "CC\t$@\n";
Update the makefile generator to support .S arm assembly files These are built if ASM_ARCH is set to arm.
2014-02-26 13:31:52 +01:00
QUIET_CCAS = @printf "CCAS\t$@\n";
Clean up spacing in the quiet rules in the makefile
2015-04-22 08:23:08 +02:00
QUIET_ASM = @printf "ASM\t$@\n";
QUIET_AR = @printf "AR\t$@\n";
QUIET_RC = @printf "RC\t$@\n";
QUIET = @
Add a make option for silencing the commands run Add "V=No" to the make command to silence the make output. This makes it easier to spot warnings or other unexpected messages in the build output.
2014-01-30 10:32:51 +01:00
endif
More fixes for out-of-tree build: - Generate version header in the build tree - Generate .res file in the build tree on Windows - Add the $(SRC_PATH) prefix to the .def files on Windows
2015-05-29 14:51:58 +02:00
INCLUDES += -I$(SRC_PATH)codec/api/svc -I$(SRC_PATH)codec/common/inc -Icodec/common/inc
Add support for assembly on linux as well as multiple configs
2013-12-10 11:57:32 +01:00
Use += for all submodules INCLUDE variables This makes it easier for platform specific makefiles to add things to some of them. (build/platform-android.mk already does this for a few submodules, e.g. GTEST_INCLUDES and CODEC_UNITTEST_INCLUDES already use +=.)
2014-07-02 11:27:28 +02:00
DECODER_INCLUDES += \
Support building outside of the source tree This allows building two versions for different architectures at the same time, without the built files clobbering each other. This is very helpful when trying to track down differences between two build configurations. To build outside of the source tree, create the other directory to use for building (either outside of the openh264 directory, or as a subdirectory), enter that directory, and do "make -f path/to/openh264/Makefile".
2014-01-29 09:31:09 +01:00
-I$(SRC_PATH)codec/decoder/core/inc \
-I$(SRC_PATH)codec/decoder/plus/inc
First cut at new build system. Tested on Mac
2013-12-10 09:19:42 +01:00
Use += for all submodules INCLUDE variables This makes it easier for platform specific makefiles to add things to some of them. (build/platform-android.mk already does this for a few submodules, e.g. GTEST_INCLUDES and CODEC_UNITTEST_INCLUDES already use +=.)
2014-07-02 11:27:28 +02:00
ENCODER_INCLUDES += \
Support building outside of the source tree This allows building two versions for different architectures at the same time, without the built files clobbering each other. This is very helpful when trying to track down differences between two build configurations. To build outside of the source tree, create the other directory to use for building (either outside of the openh264 directory, or as a subdirectory), enter that directory, and do "make -f path/to/openh264/Makefile".
2014-01-29 09:31:09 +01:00
-I$(SRC_PATH)codec/encoder/core/inc \
-I$(SRC_PATH)codec/encoder/plus/inc \
-I$(SRC_PATH)codec/processing/interface
First cut at new build system. Tested on Mac
2013-12-10 09:19:42 +01:00
Use += for all submodules INCLUDE variables This makes it easier for platform specific makefiles to add things to some of them. (build/platform-android.mk already does this for a few submodules, e.g. GTEST_INCLUDES and CODEC_UNITTEST_INCLUDES already use +=.)
2014-07-02 11:27:28 +02:00
PROCESSING_INCLUDES += \
Support building outside of the source tree This allows building two versions for different architectures at the same time, without the built files clobbering each other. This is very helpful when trying to track down differences between two build configurations. To build outside of the source tree, create the other directory to use for building (either outside of the openh264 directory, or as a subdirectory), enter that directory, and do "make -f path/to/openh264/Makefile".
2014-01-29 09:31:09 +01:00
-I$(SRC_PATH)codec/processing/interface \
-I$(SRC_PATH)codec/processing/src/common \
add ARM64 Adaptative Quantization code and UT
2014-07-22 07:06:34 +02:00
-I$(SRC_PATH)codec/processing/src/adaptivequantization \
Add UT for Downsample functions.
2014-08-27 09:40:14 +02:00
-I$(SRC_PATH)codec/processing/src/downsample \
Add UT for VaaCalc Functions.
2014-08-27 07:53:18 +02:00
-I$(SRC_PATH)codec/processing/src/scrolldetection \
-I$(SRC_PATH)codec/processing/src/vaacalc
Add the common processing include directories to the include path This avoids using relative paths for including these files.
2014-02-19 13:39:43 +01:00
Fix building the gtest library when targeting android The main purpose is to make sure that the build doesn't fail if the build directory contains the gtest subdirectory, although the unittests also could be run on a device.
2014-02-20 11:07:57 +01:00
GTEST_INCLUDES += \
Support building outside of the source tree This allows building two versions for different architectures at the same time, without the built files clobbering each other. This is very helpful when trying to track down differences between two build configurations. To build outside of the source tree, create the other directory to use for building (either outside of the openh264 directory, or as a subdirectory), enter that directory, and do "make -f path/to/openh264/Makefile".
2014-01-29 09:31:09 +01:00
-I$(SRC_PATH)gtest \
-I$(SRC_PATH)gtest/include
Cleanup include dir list in Makefile
2014-01-19 15:54:10 +01:00
Fix building the gtest library when targeting android The main purpose is to make sure that the build doesn't fail if the build directory contains the gtest subdirectory, although the unittests also could be run on a device.
2014-02-20 11:07:57 +01:00
CODEC_UNITTEST_INCLUDES += \
Support building outside of the source tree This allows building two versions for different architectures at the same time, without the built files clobbering each other. This is very helpful when trying to track down differences between two build configurations. To build outside of the source tree, create the other directory to use for building (either outside of the openh264 directory, or as a subdirectory), enter that directory, and do "make -f path/to/openh264/Makefile".
2014-01-29 09:31:09 +01:00
-I$(SRC_PATH)gtest/include \
-I$(SRC_PATH)codec/common/inc \
Simplify unittest include paths Move the "test" directory to CODEC_UNITTEST_INCLUDES instead of duplicating it in every definition.
2015-02-01 23:07:46 +01:00
-I$(SRC_PATH)test
Regenerate gtest-targets.mk using mktargets.sh/py This simplifies updating all makefiles consistently.
2014-01-17 08:55:21 +01:00
Use += for all submodules INCLUDE variables This makes it easier for platform specific makefiles to add things to some of them. (build/platform-android.mk already does this for a few submodules, e.g. GTEST_INCLUDES and CODEC_UNITTEST_INCLUDES already use +=.)
2014-07-02 11:27:28 +02:00
CONSOLE_COMMON_INCLUDES += \
Support building outside of the source tree This allows building two versions for different architectures at the same time, without the built files clobbering each other. This is very helpful when trying to track down differences between two build configurations. To build outside of the source tree, create the other directory to use for building (either outside of the openh264 directory, or as a subdirectory), enter that directory, and do "make -f path/to/openh264/Makefile".
2014-01-29 09:31:09 +01:00
-I$(SRC_PATH)codec/console/common/inc
First cut at new build system. Tested on Mac
2013-12-10 09:19:42 +01:00
Support building outside of the source tree This allows building two versions for different architectures at the same time, without the built files clobbering each other. This is very helpful when trying to track down differences between two build configurations. To build outside of the source tree, create the other directory to use for building (either outside of the openh264 directory, or as a subdirectory), enter that directory, and do "make -f path/to/openh264/Makefile".
2014-01-29 09:31:09 +01:00
H264DEC_INCLUDES += $(DECODER_INCLUDES) $(CONSOLE_COMMON_INCLUDES) -I$(SRC_PATH)codec/console/dec/inc
Don't pass -L. to the MSVC linker This avoids warnings - this parameter isn't necessary on MSVC.
2014-07-02 11:31:55 +02:00
H264DEC_LDFLAGS = $(LINK_LOCAL_DIR) $(call LINK_LIB,decoder) $(call LINK_LIB,common) $(call LINK_LIB,console_common)
Share one implementation of the CReadConfig class between the decoder and encoder console apps
2014-06-29 18:20:12 +02:00
H264DEC_DEPS = $(LIBPREFIX)decoder.$(LIBSUFFIX) $(LIBPREFIX)common.$(LIBSUFFIX) $(LIBPREFIX)console_common.$(LIBSUFFIX)
Support building outside of the source tree This allows building two versions for different architectures at the same time, without the built files clobbering each other. This is very helpful when trying to track down differences between two build configurations. To build outside of the source tree, create the other directory to use for building (either outside of the openh264 directory, or as a subdirectory), enter that directory, and do "make -f path/to/openh264/Makefile".
2014-01-29 09:31:09 +01:00
H264ENC_INCLUDES += $(ENCODER_INCLUDES) $(CONSOLE_COMMON_INCLUDES) -I$(SRC_PATH)codec/console/enc/inc
Don't pass -L. to the MSVC linker This avoids warnings - this parameter isn't necessary on MSVC.
2014-07-02 11:31:55 +02:00
H264ENC_LDFLAGS = $(LINK_LOCAL_DIR) $(call LINK_LIB,encoder) $(call LINK_LIB,processing) $(call LINK_LIB,common) $(call LINK_LIB,console_common)
Share one implementation of the CReadConfig class between the decoder and encoder console apps
2014-06-29 18:20:12 +02:00
H264ENC_DEPS = $(LIBPREFIX)encoder.$(LIBSUFFIX) $(LIBPREFIX)processing.$(LIBSUFFIX) $(LIBPREFIX)common.$(LIBSUFFIX) $(LIBPREFIX)console_common.$(LIBSUFFIX)
First cut at new build system. Tested on Mac
2013-12-10 09:19:42 +01:00
Don't pass -L. to the MSVC linker This avoids warnings - this parameter isn't necessary on MSVC.
2014-07-02 11:31:55 +02:00
CODEC_UNITTEST_LDFLAGS = $(LINK_LOCAL_DIR) $(call LINK_LIB,gtest) $(call LINK_LIB,decoder) $(call LINK_LIB,encoder) $(call LINK_LIB,processing) $(call LINK_LIB,common) $(CODEC_UNITTEST_LDFLAGS_SUFFIX)
Add dependencies on the encoder libraries to the unit tests This makes sure a "make codec_unittest" succeeds without any prior make invocation. The usage of the encoder libraries in the unit test was added in 6f58a0c1.
2014-01-09 11:42:42 +01:00
CODEC_UNITTEST_DEPS = $(LIBPREFIX)gtest.$(LIBSUFFIX) $(LIBPREFIX)decoder.$(LIBSUFFIX) $(LIBPREFIX)encoder.$(LIBSUFFIX) $(LIBPREFIX)processing.$(LIBSUFFIX) $(LIBPREFIX)common.$(LIBSUFFIX)
Simplify unittest include paths Move the "test" directory to CODEC_UNITTEST_INCLUDES instead of duplicating it in every definition.
2015-02-01 23:07:46 +01:00
DECODER_UNITTEST_INCLUDES += $(CODEC_UNITTEST_INCLUDES) $(DECODER_INCLUDES)
ENCODER_UNITTEST_INCLUDES += $(CODEC_UNITTEST_INCLUDES) $(ENCODER_INCLUDES)
PROCESSING_UNITTEST_INCLUDES += $(CODEC_UNITTEST_INCLUDES) $(PROCESSING_INCLUDES)
API_TEST_INCLUDES += $(CODEC_UNITTEST_INCLUDES)
Remove dependencies on the decoder internals in unit test for the common library
2015-02-02 11:20:40 +01:00
COMMON_UNITTEST_INCLUDES += $(CODEC_UNITTEST_INCLUDES)
Support building outside of the source tree This allows building two versions for different architectures at the same time, without the built files clobbering each other. This is very helpful when trying to track down differences between two build configurations. To build outside of the source tree, create the other directory to use for building (either outside of the openh264 directory, or as a subdirectory), enter that directory, and do "make -f path/to/openh264/Makefile".
2014-01-29 09:31:09 +01:00
MODULE_INCLUDES += -I$(SRC_PATH)gmp-api
Rollup of Gecko Media Plugin patches
2014-06-18 04:54:16 +02:00
Allow setting cflags specifically for the unit test suite
2015-01-16 09:33:06 +01:00
DECODER_UNITTEST_CFLAGS += $(CODEC_UNITTEST_CFLAGS)
ENCODER_UNITTEST_CFLAGS += $(CODEC_UNITTEST_CFLAGS)
PROCESSING_UNITTEST_CFLAGS += $(CODEC_UNITTEST_CFLAGS)
API_TEST_CFLAGS += $(CODEC_UNITTEST_CFLAGS)
COMMON_UNITTEST_CFLAGS += $(CODEC_UNITTEST_CFLAGS)
Include private dependencies in the Libs line in pkg-config if only installing a static library If only a static library is installed, the user of the library may not know that only a static version of this particular library is available (and doesn't know that --static should be added to the pkg-config call). Therefore, one common practice is to include private dependencies in the public Libs line if a static-only library is installed.
2015-01-02 20:56:38 +01:00
.PHONY: test gtest-bootstrap clean $(PROJECT_NAME).pc $(PROJECT_NAME)-static.pc
Add make test to Travis
2013-12-13 22:09:59 +01:00
Fix the name of the version generation makefile target
2014-07-23 23:26:42 +02:00
generate-version:
More fixes for out-of-tree build: - Generate version header in the build tree - Generate .res file in the build tree on Windows - Add the $(SRC_PATH) prefix to the .def files on Windows
2015-05-29 14:51:58 +02:00
$(QUIET)sh $(SRC_PATH)codec/common/generate_version.sh $(SRC_PATH)
First cut at new build system. Tested on Mac
2013-12-10 09:19:42 +01:00
Fix the name of the version generation makefile target
2014-07-23 23:26:42 +02:00
codec/decoder/plus/src/welsDecoderExt.$(OBJ): | generate-version
codec/encoder/plus/src/welsEncoderExt.$(OBJ): | generate-version
Add dependencies to generating version.h in the object files that use it Previously the makefile didn't know that there was any dependency between compiling welsDecoderExt.o and welsEncoderExt.o and the regeneration of the version.h header. This meant that in parallel builds (make -jX), make could try to regenerate version.h while compiling welsDecoderExt.o and welsEncoderExt.o, which would lead to errors about version.h not existing. Also add some spacing around the makefile rules. This fixes parallel make building in certain cases.
2014-07-23 23:24:12 +02:00
First cut at new build system. Tested on Mac
2013-12-10 09:19:42 +01:00
clean:
for cleaning .o and .d files generated by android demo
2014-06-03 05:21:10 +02:00
ifeq (android,$(OS))
and space to colon, modify bad note
2014-06-05 03:23:19 +02:00
clean: clean_Android
for cleaning .o and .d files generated by android demo
2014-06-03 05:21:10 +02:00
endif
Ignore the MSVC generated map file, remove it on make clean
2016-01-21 09:23:34 +01:00
$(QUIET)rm -f $(OBJS) $(OBJS:.$(OBJ)=.d) $(OBJS:.$(OBJ)=.obj) $(LIBRARIES) $(BINARIES) *.lib *.a *.dylib *.dll *.so *.exe *.pdb *.exp *.pc *.res *.map
First cut at new build system. Tested on Mac
2013-12-10 09:19:42 +01:00
Rollup of Gecko Media Plugin patches
2014-06-18 04:54:16 +02:00
gmp-bootstrap:
Pull gmp-api by branch name
2014-07-09 23:51:16 +02:00
if [ ! -d gmp-api ] ; then git clone https://github.com/mozilla/gmp-api gmp-api ; fi
cd gmp-api && git fetch origin && git checkout $(GMP_API_BRANCH)
Rollup of Gecko Media Plugin patches
2014-06-18 04:54:16 +02:00
Make gtest support conditional
2013-12-12 05:24:55 +01:00
gtest-bootstrap:
svn co https://googletest.googlecode.com/svn/trunk/ gtest
Add support for assembly on linux as well as multiple configs
2013-12-10 11:57:32 +01:00
Makefile modifications for test target On fresh clone of repo, "make test" used to give, "make: *** No rule to make target `codec_unittest', needed by `test'. Stop." because gtest was not available. This message is not very helpful. Instead printing that gtest is not available and the command to run to obtain gtest.
2014-01-12 13:08:56 +01:00
ifeq ($(HAVE_GTEST),Yes)
Add unittest demo for android platform
2014-05-20 08:19:23 +02:00
t
2014-06-05 10:40:28 +02:00
ifneq (android,$(OS))
add iosutdemo
2014-06-05 10:20:50 +02:00
ifneq (ios,$(OS))
Don't try to run the unit test suite on "make test" for windows phone This makes it consistent with android and iOS.
2015-04-17 14:04:26 +02:00
ifneq (msvc-wp,$(OS))
Simplify the makefile handling of building the unit test library Instead of repeating everything hardcoded with platform ifdefs, use a common define BUILD_UT_EXE to define whether we should build an executable or a library of the unit test suite. Later factorize all other platform differences into smaller and simpler ifdefs.
2015-04-17 14:51:14 +02:00
BUILD_UT_EXE=Yes
endif
Add unittest demo for android platform
2014-05-20 08:19:23 +02:00
endif
add iosutdemo
2014-06-05 10:20:50 +02:00
endif
Simplify the makefile handling of building the unit test library Instead of repeating everything hardcoded with platform ifdefs, use a common define BUILD_UT_EXE to define whether we should build an executable or a library of the unit test suite. Later factorize all other platform differences into smaller and simpler ifdefs.
2015-04-17 14:51:14 +02:00
test: codec_unittest$(EXEEXT)
ifeq ($(BUILD_UT_EXE), Yes)
./codec_unittest
Don't try to run the unit test suite on "make test" for windows phone This makes it consistent with android and iOS.
2015-04-17 14:04:26 +02:00
endif
add iosutdemo
2014-06-05 10:20:50 +02:00
Makefile modifications for test target On fresh clone of repo, "make test" used to give, "make: *** No rule to make target `codec_unittest', needed by `test'. Stop." because gtest was not available. This message is not very helpful. Instead printing that gtest is not available and the command to run to obtain gtest.
2014-01-12 13:08:56 +01:00
else
Don't call make recursively to build codec_unittest
2014-01-17 10:05:33 +01:00
test:
Remove stray spaces before colon in messages
2015-04-22 08:18:19 +02:00
@echo "./gtest: No such file or directory."
Makefile modifications for test target On fresh clone of repo, "make test" used to give, "make: *** No rule to make target `codec_unittest', needed by `test'. Stop." because gtest was not available. This message is not very helpful. Instead printing that gtest is not available and the command to run to obtain gtest.
2014-01-12 13:08:56 +01:00
@echo "You do not have gtest. Run make gtest-bootstrap to get gtest"
endif
Add make test to Travis
2013-12-13 22:09:59 +01:00
Support building outside of the source tree This allows building two versions for different architectures at the same time, without the built files clobbering each other. This is very helpful when trying to track down differences between two build configurations. To build outside of the source tree, create the other directory to use for building (either outside of the openh264 directory, or as a subdirectory), enter that directory, and do "make -f path/to/openh264/Makefile".
2014-01-29 09:31:09 +01:00
include $(SRC_PATH)codec/common/targets.mk
include $(SRC_PATH)codec/decoder/targets.mk
include $(SRC_PATH)codec/encoder/targets.mk
include $(SRC_PATH)codec/processing/targets.mk
add android support, single commit
2014-02-19 02:54:27 +01:00
Rollup of Gecko Media Plugin patches
2014-06-18 04:54:16 +02:00
ifeq ($(HAVE_GMP_API),Yes)
Support building outside of the source tree This allows building two versions for different architectures at the same time, without the built files clobbering each other. This is very helpful when trying to track down differences between two build configurations. To build outside of the source tree, create the other directory to use for building (either outside of the openh264 directory, or as a subdirectory), enter that directory, and do "make -f path/to/openh264/Makefile".
2014-01-29 09:31:09 +01:00
include $(SRC_PATH)module/targets.mk
Rollup of Gecko Media Plugin patches
2014-06-18 04:54:16 +02:00
endif
add android support, single commit
2014-02-19 02:54:27 +01:00
ifneq (android, $(OS))
Add the APPLE_IOS define when building for iOS with make Previously the define was only used when building from within the xcode project files. This enables the arm neon assembly.
2014-03-01 16:24:15 +01:00
ifneq (ios, $(OS))
add ut demo for wp8
2015-04-17 08:10:12 +02:00
ifneq (msvc-wp, $(OS))
Support building outside of the source tree This allows building two versions for different architectures at the same time, without the built files clobbering each other. This is very helpful when trying to track down differences between two build configurations. To build outside of the source tree, create the other directory to use for building (either outside of the openh264 directory, or as a subdirectory), enter that directory, and do "make -f path/to/openh264/Makefile".
2014-01-29 09:31:09 +01:00
include $(SRC_PATH)codec/console/dec/targets.mk
include $(SRC_PATH)codec/console/enc/targets.mk
include $(SRC_PATH)codec/console/common/targets.mk
add android support, single commit
2014-02-19 02:54:27 +01:00
endif
Add the APPLE_IOS define when building for iOS with make Previously the define was only used when building from within the xcode project files. This enables the arm neon assembly.
2014-03-01 16:24:15 +01:00
endif
add ut demo for wp8
2015-04-17 08:10:12 +02:00
endif
First cut at new build system. Tested on Mac
2013-12-10 09:19:42 +01:00
Reduce some nested ifdefs in the makefile
2015-04-17 14:36:33 +02:00
libraries: $(LIBPREFIX)$(PROJECT_NAME).$(LIBSUFFIX)
# No point in building dylib for ios
add iosutdemo
2014-06-05 10:20:50 +02:00
ifneq (ios, $(OS))
Reduce some nested ifdefs in the makefile
2015-04-17 14:36:33 +02:00
libraries: $(LIBPREFIX)$(PROJECT_NAME).$(SHAREDLIBSUFFIX)
add ut demo for wp8
2015-04-17 08:10:12 +02:00
endif
Reduce some nested ifdefs in the makefile
2015-04-17 14:36:33 +02:00
Makefile: Fix shared library building on various OSes Versioned for OS not in (Windows, Android), and create a .dll.a implib on Windows
2014-11-13 14:18:33 +01:00
LIBRARIES += $(LIBPREFIX)$(PROJECT_NAME).$(LIBSUFFIX) $(LIBPREFIX)$(PROJECT_NAME).$(SHAREDLIBSUFFIXVER)
Build one large static library containing both decoder and encoder
2014-01-27 13:42:36 +01:00
Parameterize the project name and change it to openh264
2014-05-02 17:12:40 +02:00
$(LIBPREFIX)$(PROJECT_NAME).$(LIBSUFFIX): $(ENCODER_OBJS) $(DECODER_OBJS) $(PROCESSING_OBJS) $(COMMON_OBJS)
Silence building libwels.a building with V=0
2014-02-18 09:33:09 +01:00
$(QUIET)rm -f $@
$(QUIET_AR)$(AR) $(AR_OPTS) $+
add stripped lib for firefox and modify README for the usage fo DEBUGSYMBOLS
2015-12-08 02:52:03 +01:00
ifeq (True, $(DEBUGSYMBOLS))
strip $(STRIP_FLAGS) $@ -o $(LIBPREFIX)$(PROJECT_NAME)_stripped.$(LIBSUFFIX)
endif
Build one large static library containing both decoder and encoder
2014-01-27 13:42:36 +01:00
Makefile: Fix shared library building on various OSes Versioned for OS not in (Windows, Android), and create a .dll.a implib on Windows
2014-11-13 14:18:33 +01:00
$(LIBPREFIX)$(PROJECT_NAME).$(SHAREDLIBSUFFIXVER): $(ENCODER_OBJS) $(DECODER_OBJS) $(PROCESSING_OBJS) $(COMMON_OBJS)
Fix silent builds of the shared library
2014-02-19 10:47:09 +01:00
$(QUIET)rm -f $@
Set LDFLAGS after the object files in shared library linking commands This makes sure that the built libopenh264.so actually links to libpthread.so.
2014-10-22 08:40:16 +02:00
$(QUIET_CXX)$(CXX) $(SHARED) $(CXX_LINK_O) $+ $(LDFLAGS) $(SHLDFLAGS)
add stripped lib for firefox and modify README for the usage fo DEBUGSYMBOLS
2015-12-08 02:52:03 +01:00
ifeq (True, $(DEBUGSYMBOLS))
strip $(STRIP_FLAGS) $@ -o $(LIBPREFIX)$(PROJECT_NAME)_stripped.$(SHAREDLIBSUFFIXVER)
endif
Handle generating the versionless library via make rules This makes sure both "make libopenh264.so" and "make libopenh264.so.0" work as intended. Use the versionless name as dependency for the install rule, to make sure both (if possible) are created.
2014-12-01 13:22:56 +01:00
ifneq ($(SHAREDLIBSUFFIXVER),$(SHAREDLIBSUFFIX))
$(LIBPREFIX)$(PROJECT_NAME).$(SHAREDLIBSUFFIX): $(LIBPREFIX)$(PROJECT_NAME).$(SHAREDLIBSUFFIXVER)
$(QUIET)ln -sfn $+ $@
endif
add android support, single commit
2014-02-19 02:54:27 +01:00
Rollup of Gecko Media Plugin patches
2014-06-18 04:54:16 +02:00
ifeq ($(HAVE_GMP_API),Yes)
add an echo-plugin-name target
2015-11-18 12:47:39 +01:00
plugin: $(MODULE)
Makefile: Fix shared library building on various OSes Versioned for OS not in (Windows, Android), and create a .dll.a implib on Windows
2014-11-13 14:18:33 +01:00
LIBRARIES += $(LIBPREFIX)$(MODULE_NAME).$(SHAREDLIBSUFFIXVER)
Rollup of Gecko Media Plugin patches
2014-06-18 04:54:16 +02:00
else
plugin:
Remove stray spaces before colon in messages
2015-04-22 08:18:19 +02:00
@echo "./gmp-api: No such file or directory."
Rollup of Gecko Media Plugin patches
2014-06-18 04:54:16 +02:00
@echo "You do not have gmp-api. Run make gmp-bootstrap to get the gmp-api headers."
endif
add an echo-plugin-name target
2015-11-18 12:47:39 +01:00
echo-plugin-name:
@echo $(MODULE)
Makefile: Fix shared library building on various OSes Versioned for OS not in (Windows, Android), and create a .dll.a implib on Windows
2014-11-13 14:18:33 +01:00
$(LIBPREFIX)$(MODULE_NAME).$(SHAREDLIBSUFFIXVER): $(MODULE_OBJS) $(ENCODER_OBJS) $(DECODER_OBJS) $(PROCESSING_OBJS) $(COMMON_OBJS)
Rollup of Gecko Media Plugin patches
2014-06-18 04:54:16 +02:00
$(QUIET)rm -f $@
Set LDFLAGS after the object files in shared library linking commands This makes sure that the built libopenh264.so actually links to libpthread.so.
2014-10-22 08:40:16 +02:00
$(QUIET_CXX)$(CXX) $(SHARED) $(CXX_LINK_O) $+ $(LDFLAGS) $(SHLDFLAGS) $(MODULE_LDFLAGS)
add stripped lib for firefox and modify README for the usage fo DEBUGSYMBOLS
2015-12-08 02:52:03 +01:00
ifeq (True, $(DEBUGSYMBOLS))
strip $(STRIP_FLAGS) $@ -o $(LIBPREFIX)$(MODULE_NAME)_stripped.$(SHAREDLIBSUFFIXVER)
endif
Handle generating the versionless library via make rules This makes sure both "make libopenh264.so" and "make libopenh264.so.0" work as intended. Use the versionless name as dependency for the install rule, to make sure both (if possible) are created.
2014-12-01 13:22:56 +01:00
ifneq ($(SHAREDLIBSUFFIXVER),$(SHAREDLIBSUFFIX))
add an echo-plugin-name target
2015-11-18 12:47:39 +01:00
$(MODULE): $(LIBPREFIX)$(MODULE_NAME).$(SHAREDLIBSUFFIXVER)
Handle generating the versionless library via make rules This makes sure both "make libopenh264.so" and "make libopenh264.so.0" work as intended. Use the versionless name as dependency for the install rule, to make sure both (if possible) are created.
2014-12-01 13:22:56 +01:00
$(QUIET)ln -sfn $+ $@
add stripped lib for firefox and modify README for the usage fo DEBUGSYMBOLS
2015-12-08 02:52:03 +01:00
ifeq (True, $(DEBUGSYMBOLS))
$(QUIET)ln -sfn $(LIBPREFIX)$(MODULE_NAME)_stripped.$(SHAREDLIBSUFFIXVER) $(LIBPREFIX)$(MODULE_NAME)_stripped.$(SHAREDLIBSUFFIX)
endif
Handle generating the versionless library via make rules This makes sure both "make libopenh264.so" and "make libopenh264.so.0" work as intended. Use the versionless name as dependency for the install rule, to make sure both (if possible) are created.
2014-12-01 13:22:56 +01:00
endif
Rollup of Gecko Media Plugin patches
2014-06-18 04:54:16 +02:00
Use vpath instead of explicit $(SRC_PATH) for building .pc files out of tree
2015-05-28 23:10:45 +02:00
$(PROJECT_NAME).pc: $(PROJECT_NAME).pc.in
Fix install targets for out-of-tree builds.
2015-05-25 13:02:12 +02:00
@sed -e 's;@prefix@;$(PREFIX);' -e 's;@VERSION@;$(VERSION);' -e 's;@LIBS@;;' -e 's;@LIBS_PRIVATE@;$(STATIC_LDFLAGS);' < $< > $@
Include private dependencies in the Libs line in pkg-config if only installing a static library If only a static library is installed, the user of the library may not know that only a static version of this particular library is available (and doesn't know that --static should be added to the pkg-config call). Therefore, one common practice is to include private dependencies in the public Libs line if a static-only library is installed.
2015-01-02 20:56:38 +01:00
Use vpath instead of explicit $(SRC_PATH) for building .pc files out of tree
2015-05-28 23:10:45 +02:00
$(PROJECT_NAME)-static.pc: $(PROJECT_NAME).pc.in
Fix install targets for out-of-tree builds.
2015-05-25 13:02:12 +02:00
@sed -e 's;@prefix@;$(PREFIX);' -e 's;@VERSION@;$(VERSION);' -e 's;@LIBS@;$(STATIC_LDFLAGS);' -e 's;@LIBS_PRIVATE@;;' < $< > $@
Add pkg-config file.
2014-10-26 23:25:15 +01:00
Add separate install-static and install-shared targets This allows installing only the static library or shared library without the other.
2014-03-07 14:10:46 +01:00
install-headers:
Remove the extra slash between $(DESTDIR) and $(PREFIX) If DESTDIR is set, it needs to include a trailing slash now. This fixes "make install" on msys (i.e. on windows), where a path starting with // is interpreted as a special network path.
2015-03-16 14:47:32 +01:00
mkdir -p $(DESTDIR)$(PREFIX)/include/wels
Fix install targets for out-of-tree builds.
2015-05-25 13:02:12 +02:00
install -m 644 $(SRC_PATH)/codec/api/svc/codec*.h $(DESTDIR)$(PREFIX)/include/wels
Add separate install-static and install-shared targets This allows installing only the static library or shared library without the other.
2014-03-07 14:10:46 +01:00
Include private dependencies in the Libs line in pkg-config if only installing a static library If only a static library is installed, the user of the library may not know that only a static version of this particular library is available (and doesn't know that --static should be added to the pkg-config call). Therefore, one common practice is to include private dependencies in the public Libs line if a static-only library is installed.
2015-01-02 20:56:38 +01:00
install-static-lib: $(LIBPREFIX)$(PROJECT_NAME).$(LIBSUFFIX) install-headers
Make the static library directory configurable When running "make install" the destination of pkgconfig/openh264.pc and lib/libopenh264.a was hard coded to "lib". When building packages it might be required to change the install location of those files to the systems default library location (like lib64 or lib/x86_64-linux-gnu for example). This commit adds an additional make variable "LIBDIR_NAME" that allows it to change the destination directory for those files. Without setting LIBDIR_NAME the installation location is the same as before (lib).
2015-06-19 16:23:34 +02:00
mkdir -p $(DESTDIR)$(PREFIX)/$(LIBDIR_NAME)
install -m 644 $(LIBPREFIX)$(PROJECT_NAME).$(LIBSUFFIX) $(DESTDIR)$(PREFIX)/$(LIBDIR_NAME)
Add separate install-static and install-shared targets This allows installing only the static library or shared library without the other.
2014-03-07 14:10:46 +01:00
Include private dependencies in the Libs line in pkg-config if only installing a static library If only a static library is installed, the user of the library may not know that only a static version of this particular library is available (and doesn't know that --static should be added to the pkg-config call). Therefore, one common practice is to include private dependencies in the public Libs line if a static-only library is installed.
2015-01-02 20:56:38 +01:00
install-static: install-static-lib $(PROJECT_NAME)-static.pc
Make the static library directory configurable When running "make install" the destination of pkgconfig/openh264.pc and lib/libopenh264.a was hard coded to "lib". When building packages it might be required to change the install location of those files to the systems default library location (like lib64 or lib/x86_64-linux-gnu for example). This commit adds an additional make variable "LIBDIR_NAME" that allows it to change the destination directory for those files. Without setting LIBDIR_NAME the installation location is the same as before (lib).
2015-06-19 16:23:34 +02:00
mkdir -p $(DESTDIR)$(PREFIX)/$(LIBDIR_NAME)/pkgconfig
install -m 644 $(PROJECT_NAME)-static.pc $(DESTDIR)$(PREFIX)/$(LIBDIR_NAME)/pkgconfig/$(PROJECT_NAME).pc
Include private dependencies in the Libs line in pkg-config if only installing a static library If only a static library is installed, the user of the library may not know that only a static version of this particular library is available (and doesn't know that --static should be added to the pkg-config call). Therefore, one common practice is to include private dependencies in the public Libs line if a static-only library is installed.
2015-01-02 20:56:38 +01:00
Handle generating the versionless library via make rules This makes sure both "make libopenh264.so" and "make libopenh264.so.0" work as intended. Use the versionless name as dependency for the install rule, to make sure both (if possible) are created.
2014-12-01 13:22:56 +01:00
install-shared: $(LIBPREFIX)$(PROJECT_NAME).$(SHAREDLIBSUFFIX) install-headers $(PROJECT_NAME).pc
Remove the extra slash between $(DESTDIR) and $(PREFIX) If DESTDIR is set, it needs to include a trailing slash now. This fixes "make install" on msys (i.e. on windows), where a path starting with // is interpreted as a special network path.
2015-03-16 14:47:32 +01:00
mkdir -p $(DESTDIR)$(SHAREDLIB_DIR)
install -m 755 $(LIBPREFIX)$(PROJECT_NAME).$(SHAREDLIBSUFFIXVER) $(DESTDIR)$(SHAREDLIB_DIR)
Check the suffix instead of checking whether a file is a link This feels more straightforward - some file systems/environments (such as MSys) implement symlinks as plain file copies, where distinguishing whether a file is a link might be hard.
2014-12-01 13:19:13 +01:00
if [ "$(SHAREDLIBSUFFIXVER)" != "$(SHAREDLIBSUFFIX)" ]; then \
Remove the extra slash between $(DESTDIR) and $(PREFIX) If DESTDIR is set, it needs to include a trailing slash now. This fixes "make install" on msys (i.e. on windows), where a path starting with // is interpreted as a special network path.
2015-03-16 14:47:32 +01:00
cp -a $(LIBPREFIX)$(PROJECT_NAME).$(SHAREDLIBSUFFIX) $(DESTDIR)$(SHAREDLIB_DIR); \
Makefile: Fix shared library building on various OSes Versioned for OS not in (Windows, Android), and create a .dll.a implib on Windows
2014-11-13 14:18:33 +01:00
fi
Make the static library directory configurable When running "make install" the destination of pkgconfig/openh264.pc and lib/libopenh264.a was hard coded to "lib". When building packages it might be required to change the install location of those files to the systems default library location (like lib64 or lib/x86_64-linux-gnu for example). This commit adds an additional make variable "LIBDIR_NAME" that allows it to change the destination directory for those files. Without setting LIBDIR_NAME the installation location is the same as before (lib).
2015-06-19 16:23:34 +02:00
mkdir -p $(DESTDIR)$(PREFIX)/$(LIBDIR_NAME)/pkgconfig
install -m 644 $(PROJECT_NAME).pc $(DESTDIR)$(PREFIX)/$(LIBDIR_NAME)/pkgconfig
Install the import library as well, in MSVC builds
2014-02-19 12:12:52 +01:00
ifneq ($(EXTRA_LIBRARY),)
Make the static library directory configurable When running "make install" the destination of pkgconfig/openh264.pc and lib/libopenh264.a was hard coded to "lib". When building packages it might be required to change the install location of those files to the systems default library location (like lib64 or lib/x86_64-linux-gnu for example). This commit adds an additional make variable "LIBDIR_NAME" that allows it to change the destination directory for those files. Without setting LIBDIR_NAME the installation location is the same as before (lib).
2015-06-19 16:23:34 +02:00
install -m 644 $(EXTRA_LIBRARY) $(DESTDIR)$(PREFIX)/$(LIBDIR_NAME)
Install the import library as well, in MSVC builds
2014-02-19 12:12:52 +01:00
endif
Add separate install-static and install-shared targets This allows installing only the static library or shared library without the other.
2014-03-07 14:10:46 +01:00
Include private dependencies in the Libs line in pkg-config if only installing a static library If only a static library is installed, the user of the library may not know that only a static version of this particular library is available (and doesn't know that --static should be added to the pkg-config call). Therefore, one common practice is to include private dependencies in the public Libs line if a static-only library is installed.
2015-01-02 20:56:38 +01:00
install: install-static-lib install-shared
Add separate install-static and install-shared targets This allows installing only the static library or shared library without the other.
2014-03-07 14:10:46 +01:00
@:
Build one large static library containing both decoder and encoder
2014-01-27 13:42:36 +01:00
Reorder ifeq/ifneq for a long if statement By having the very short clause first, it is easier to see what it belongs to.
2015-04-17 14:56:56 +02:00
ifneq ($(HAVE_GTEST),Yes)
binaries:
@:
else
Support building outside of the source tree This allows building two versions for different architectures at the same time, without the built files clobbering each other. This is very helpful when trying to track down differences between two build configurations. To build outside of the source tree, create the other directory to use for building (either outside of the openh264 directory, or as a subdirectory), enter that directory, and do "make -f path/to/openh264/Makefile".
2014-01-29 09:31:09 +01:00
include $(SRC_PATH)build/gtest-targets.mk
include $(SRC_PATH)test/api/targets.mk
include $(SRC_PATH)test/decoder/targets.mk
include $(SRC_PATH)test/encoder/targets.mk
include $(SRC_PATH)test/processing/targets.mk
include $(SRC_PATH)test/common/targets.mk
Add unittest demo for android platform
2014-05-20 08:19:23 +02:00
modify
2014-06-06 11:44:22 +02:00
LIBRARIES += $(LIBPREFIX)ut.$(LIBSUFFIX)
update expand picture UT
2014-06-12 03:37:30 +02:00
$(LIBPREFIX)ut.$(LIBSUFFIX): $(DECODER_UNITTEST_OBJS) $(ENCODER_UNITTEST_OBJS) $(PROCESSING_UNITTEST_OBJS) $(COMMON_UNITTEST_OBJS) $(API_TEST_OBJS)
add iosutdemo
2014-06-05 10:20:50 +02:00
$(QUIET)rm -f $@
$(QUIET_AR)$(AR) $(AR_OPTS) $+
Add unittest demo for android platform
2014-05-20 08:19:23 +02:00
LIBRARIES +=$(LIBPREFIX)ut.$(SHAREDLIBSUFFIX)
Remove a stray double space
2015-04-17 14:46:15 +02:00
$(LIBPREFIX)ut.$(SHAREDLIBSUFFIX): $(DECODER_UNITTEST_OBJS) $(ENCODER_UNITTEST_OBJS) $(PROCESSING_UNITTEST_OBJS) $(API_TEST_OBJS) $(COMMON_UNITTEST_OBJS) $(CODEC_UNITTEST_DEPS)
Add unittest demo for android platform
2014-05-20 08:19:23 +02:00
$(QUIET)rm -f $@
add ut demo for wp8
2015-04-17 08:10:12 +02:00
$(QUIET_CXX)$(CXX) $(SHARED) $(CXX_LINK_O) $+ $(LDFLAGS) $(UTSHLDFLAGS) $(CODEC_UNITTEST_LDFLAGS)
Add unittest demo for android platform
2014-05-20 08:19:23 +02:00
fix make test failure issue
2014-03-25 04:11:53 +01:00
binaries: codec_unittest$(EXEEXT)
BINARIES += codec_unittest$(EXEEXT)
Add unittest demo for android platform
2014-05-20 08:19:23 +02:00
Simplify the makefile handling of building the unit test library Instead of repeating everything hardcoded with platform ifdefs, use a common define BUILD_UT_EXE to define whether we should build an executable or a library of the unit test suite. Later factorize all other platform differences into smaller and simpler ifdefs.
2015-04-17 14:51:14 +02:00
ifeq ($(BUILD_UT_EXE), Yes)
# Build a normal command line executable
codec_unittest$(EXEEXT): $(DECODER_UNITTEST_OBJS) $(ENCODER_UNITTEST_OBJS) $(PROCESSING_UNITTEST_OBJS) $(API_TEST_OBJS) $(COMMON_UNITTEST_OBJS) $(CODEC_UNITTEST_DEPS) | res
$(QUIET)rm -f $@
$(QUIET_CXX)$(CXX) $(CXX_LINK_O) $+ $(CODEC_UNITTEST_LDFLAGS) $(LDFLAGS)
res:
$(QUIET)if [ ! -e res ]; then ln -s $(SRC_PATH)res .; fi
else
# Build the unit test suite into a library that is included in a project file
add iosutdemo
2014-06-05 10:20:50 +02:00
ifeq (ios,$(OS))
Build libgtest.a and libopenh264.a when doing "make test" for iOS
2014-06-10 15:10:48 +02:00
codec_unittest$(EXEEXT): $(LIBPREFIX)ut.$(LIBSUFFIX) $(LIBPREFIX)gtest.$(LIBSUFFIX) $(LIBPREFIX)$(PROJECT_NAME).$(LIBSUFFIX)
add iosutdemo
2014-06-05 10:20:50 +02:00
else
Simplify the makefile handling of building the unit test library Instead of repeating everything hardcoded with platform ifdefs, use a common define BUILD_UT_EXE to define whether we should build an executable or a library of the unit test suite. Later factorize all other platform differences into smaller and simpler ifdefs.
2015-04-17 14:51:14 +02:00
codec_unittest$(EXEEXT): $(LIBPREFIX)ut.$(SHAREDLIBSUFFIX)
endif
add iosutdemo
2014-06-05 10:20:50 +02:00
ifeq (android,$(OS))
Support building outside of the source tree This allows building two versions for different architectures at the same time, without the built files clobbering each other. This is very helpful when trying to track down differences between two build configurations. To build outside of the source tree, create the other directory to use for building (either outside of the openh264 directory, or as a subdirectory), enter that directory, and do "make -f path/to/openh264/Makefile".
2014-01-29 09:31:09 +01:00
ifeq (./,$(SRC_PATH))
Simplify the makefile handling of building the unit test library Instead of repeating everything hardcoded with platform ifdefs, use a common define BUILD_UT_EXE to define whether we should build an executable or a library of the unit test suite. Later factorize all other platform differences into smaller and simpler ifdefs.
2015-04-17 14:51:14 +02:00
codec_unittest$(EXEEXT):
Add unittest demo for android platform
2014-05-20 08:19:23 +02:00
cd ./test/build/android && $(NDKROOT)/ndk-build -B APP_ABI=$(APP_ABI) && android update project -t $(TARGET) -p . && ant debug
and space to colon, modify bad note
2014-06-05 03:23:19 +02:00
clean_Android: clean_Android_ut
for cleaning .o and .d files generated by android demo
2014-06-03 05:21:10 +02:00
clean_Android_ut:
Ignore failures in cleaning android projects If the android test projects hasn't been built yet, the "make clean" command will stop at "ant clean" (which fails since build.xml doesn't exist yet). If this happens, one still would want to run the "make clean" command to the end, cleaning up any possible intermediate object files (e.g. from a build for a different platform).
2014-07-02 12:41:27 +02:00
-cd ./test/build/android && $(NDKROOT)/ndk-build APP_ABI=$(APP_ABI) clean && ant clean
Support building outside of the source tree This allows building two versions for different architectures at the same time, without the built files clobbering each other. This is very helpful when trying to track down differences between two build configurations. To build outside of the source tree, create the other directory to use for building (either outside of the openh264 directory, or as a subdirectory), enter that directory, and do "make -f path/to/openh264/Makefile".
2014-01-29 09:31:09 +01:00
endif
add ut demo for wp8
2015-04-17 08:10:12 +02:00
endif
Support building outside of the source tree This allows building two versions for different architectures at the same time, without the built files clobbering each other. This is very helpful when trying to track down differences between two build configurations. To build outside of the source tree, create the other directory to use for building (either outside of the openh264 directory, or as a subdirectory), enter that directory, and do "make -f path/to/openh264/Makefile".
2014-01-29 09:31:09 +01:00
Add unittest demo for android platform
2014-05-20 08:19:23 +02:00
endif
add iosutdemo
2014-06-05 10:20:50 +02:00
endif
Use .obj as suffix for object files on MSVC This avoids warnings when linking about "unrecognized source file type, object file assumed".
2014-03-18 10:21:46 +01:00
-include $(OBJS:.$(OBJ)=.d)
Support building outside of the source tree This allows building two versions for different architectures at the same time, without the built files clobbering each other. This is very helpful when trying to track down differences between two build configurations. To build outside of the source tree, create the other directory to use for building (either outside of the openh264 directory, or as a subdirectory), enter that directory, and do "make -f path/to/openh264/Makefile".
2014-01-29 09:31:09 +01:00
OBJDIRS = $(sort $(dir $(OBJS)))
$(OBJDIRS):
$(QUIET)mkdir -p $@
$(OBJS): | $(OBJDIRS)
Reference in New Issue Copy Permalink