ZMQ_INVERT_MATCHING reverses the PUB/SUB prefix matching. The subscription
list becomes a rejection list. The PUB socket sends messages to all
connected (X)SUB sockets that do not have any matching subscription.
Whenever the option is used on a PUB/XPUB socket, any connecting SUB
sockets must also set it or they will reject everything the publisher
sends them. XSUB sockets are unaffected because they do not filter out
incoming messages.
Solution: change setsockopts on printable keys to expect 41, nor 40
bytes. Code still accepts 40 bytes for compatibility, and copies the
key to a well-terminated string before using it.
Fixes#1148
- This seems redundant; is there a use case for NOT providing
the IPC credentials to the ZAP authenticator?
- More, why is IPC authentication done via libzmq instead of ZAP?
Is it because we're missing the transport type on the ZAP request?
Another take on LIBZMQ-568 to allow filtering IPC connections, this time
using ZAP. This change is backward compatible. If the
ZMQ_ZAP_IPC_CREDS option is set, the user, group, and process IDs of the
peer process are appended to the address (separated by colons) of a ZAP
request; otherwise, nothing changes. See LIBZMQ-568 and zmq_setsockopt
documentation for more information.
* ZMQ_REQ_STRICT was negative option (default 1) which goes against
the standard, where defaults are zero. I renamed this to
ZMQ_REQ_RELAXED.
* ZMQ_REQ_REQUEST_IDS felt clumsy and describes the technical solution
rather than the problem/requirement. I changed to ZMQ_REQ_CORRELATE
which seems more explicit.
On ZMQ_CURVE_xxxKEY fetches, would return 41 bytes into caller's 40-byte
buffer. Now these fetches only return 41 bytes if the caller explicitly
provides a 41-byte buffer (i.e. the option size is 41).
* This is passed to the ZAP handler in the 'domain' field
* If not set, or empty, then NULL security does not call the ZAP handler
* This resolves the phantom ZAP request syndrome seen with sockets where
security was never intended (e.g. in test cases)
* This means if you install a ZAP handler, it will not get any requests
for new connections until you take some explicit action, which can be
setting a username/password for PLAIN, a key for CURVE, or the domain
for NULL.
The use of binary for CURVE keys is painful; you cannot easily copy
these in e.g. email, or use them directly in source code. There are
various encoding possibilities. Base16 and Base64 are not optimal.
Ascii85 is not safe for source (it generates quotes and escapes).
So, I've designed a new Base85 encoding, Z85, which is safe to use
in code and elsewhere, and I've modified libzmq to use this where
it also uses binary keys (in get/setsockopt).
Very simply, if you use a 32-byte value, it's Base256 (binary),
and if you use a 40-byte value, it's Base85 (Z85).
I've put the Z85 codec into z85_codec.hpp, it's not elegant C++
but it is minimal and it works. Feel free to rewrap as a real class
if this annoys you.
* ZMQ_PLAIN_SERVER, ZMQ_PLAIN_USERNAME, ZMQ_PLAIN_PASSWORD options
* Man page changes to zmq_setsockopt and zmq_getsockopt
* Man pages for ZMQ_NULL, ZMQ_PLAIN, and ZMQ_CURVE
* Test program test_security
contributors and doesn't reflect the real process. I've taken out all named
authors and referred to the contribution policy. Hopefully this will improve
the contributions to the man pages.
This patch, salvaged from a trainwreck accidental merge earlier, adds a
new sockopt, ZMQ_DELAY_ATTACH_ON_CONNECT which prevents a end point
being available to push messages to until it has fully connected, making
connect work more like bind. This also applies to reconnecting sockets,
which may cause message loss of in-queue messages, so it is sensible to
use this in conjunction with a low HWM and potentially an alternative
acknowledgement path.
Notes on most of the individual commits can be found the repository log.
This patch adds a sockopt ZMQ_DELAY_ATTACH_ON_CONNECT, which if set to 1 will attempt to preempt this behavior. It does this by extending the use of the session_base to include in the outbound as well as the inbound pipe, and only associates the pipe with the socket once it receives the connected callback via a process_attach message. This works, and a test has been added to show so, but may introduce unexpected complications. The shutdown logic in this class has become marginally more awkward because of this, requiring the session to serve as the sink for both pipes if shutdown occurs with a still-connecting pipe in place. It is also possible there could be issues around flushing the messages, but as I could not directly think how to create such an issue I have not written any code with regards to that.
The documentation has been updated to reflect the change, but please do check over the code and test and review.
The current ZMQ_MONITOR code does not compile in gcc 4.7, as -pedantic
and -Werror are enabled, and ISO C++ doesn't allow casting between
normal pointers (void*) and function pointers, as pedantically their
size could be different. This caused the library not compilable. This
commit workaround the problem by introducing one more indirection, i.e.
instead of calling
(void *)listener
which is an error, we have to use
*(void **)&listener
which is an undefined behavior :) but works on most platforms
Also, `optval_ = monitor` will not set the parameter in getsockopt(),
and the extra casting caused the LHS to be an rvalue which again makes
the code not compilable. The proper way is to pass a pointer of function
pointer and assign with indirection, i.e. `*optval_ = monitor`.
Also, fixed an asciidoc error in zmq_getsockopt.txt because the `~~~~`
is too long.
This patch is meant to prevent users from running out of memory
when using 0MQ in the default configuration.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
At this point option exists, is documented and can be set,
however, it has no effect.
Signed-off-by: Steven McCoy <steven.mccoy@miru.hk>
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
The filtering is now done depending on the socket type. SUB socket
filters the messages (end-to-end filtering) while XSUB relies
on upstream nodes to do (imprefect) filtering.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
So far there was no distinction between message parts used by 0MQ
and message parts used by user. Now, the message parts used by 0MQ
are marked as 'LABEL'.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
This option is a performance tweak. In devices XSUB socket filters
the messages just to send them to XPUB socket which filters them
once more. Setting ZMQ_FILTER option to 0 allows to switch the
filtering in XSUB socket off.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
These new options allow to control the maximum size of the
inbound and outbound message pipe separately.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
On-disk storage should be implemented in devices rather than
in 0MQ core. 0MQ is a networking library and there's no point
in storing network buffers on disk.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
Multicast loopback is not a real multicast, rather a kernel-space
simulation. Moreover, it tends to be rather unreliable and lossy.
Removing the option will force users to use transports better
suited for the job, such as inproc or ipc.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
The new option allows user to guard against peers sending
oversized messages. Connection to peer sending oversized message
is dropped.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
For very high-speed message systems, the memory used for recovery can get to
be very large. The corrent limitation on that reduction is the ZMQ_RECOVERY_IVL
of 1 sec. I added in an additional option ZMQ_RECOVERY_IVL_MSEC, which is the
Recovery Interval in milliseconds. If used, this will override the previous
one, and allow you to set a sub-second recovery interval. If not set, the
default behavior is to use ZMQ_RECOVERY_IVL.
Signed-off-by: Bob Beaty <rbeaty@peak6.com>
- Clarify ZMQ_LINGER, zmq_close (), zmq_term () relationship
- New socket options
- Clarify thread safety of sockets and migration between threads
- Other minor and spelling fixes
Signed-off-by: Martin Lucina <mato@kotelna.sk>
1. ZMQ_LINGER option can be set/get
2. options are part of own_t base class rather than being declared
separately by individual objects
3. Linger option is propagated with "term" command so that the
newest value of it is used rather than the stored old one.
4. Session sets the linger timer if needed and terminates
as soon as it expires.
5. Corresponding documentation updated.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
- fixed unwrapped text in new man pages
- fixed over-long lines in older pages, where possible
- removed reference to old standalong devices from index page
- added refernce to new zmq_device[3] documented from index page
- some minor spelling corrections
* Added documentation for zmq_deviced, which we're developing
* Created consistent page footer in documentation template
* Page footer notes doc authors and copyright statement
