ZMQ_INVERT_MATCHING reverses the PUB/SUB prefix matching. The subscription
list becomes a rejection list. The PUB socket sends messages to all
connected (X)SUB sockets that do not have any matching subscription.
Whenever the option is used on a PUB/XPUB socket, any connecting SUB
sockets must also set it or they will reject everything the publisher
sends them. XSUB sockets are unaffected because they do not filter out
incoming messages.
Symptom is that ZMQ_STREAM sockets in 4.1.0 and 4.1.1 generate zero
sized messages on each new connection, unlike 4.0.x which did not do
this.
Person who made this commit also changed test cases so that contract
breakage did not show. Same person was later banned for persistently
poor form in CZMQ contributions.
Solution: enable connect notifications on ZMQ_STREAM sockets using a
new ZMQ_STREAM_NOTIFY setting. By default, socket does not deliver
notifications, and behaves as in 4.0.x.
Fixes#1316
Increasing it would have at least two benefits -
* More messages would be 'VSM' messages, so it would reduce allocation
overhead a bit.
* Remove any chance of false sharing of things that are, by design,
pushed by value onto a ypipe_t<msg_t> which is shared between two threads.
The only downside I see is slightly increased memory consumption on memory
constrained applications.
- Full discussion of this rationale is part of issue #1295
Firstly, only a few types are defined, leaving it hard for higher layers
to complete the set. Secondly, the code incorrectly tries to use ifndef
to avoid re-defining typedefs, which does not work in C.
Solution: define all types, unconditionally for all MSVC compilers.
Additionally, define ZMQ_DEFINED_STDINT that tells higher layers that we
already defined these integer types.
zmq_atomic_counter_dec returned a 'bool' value, yet this isn't
defined by standard, so causes compile errors in upstream code.
Solution: return an int that can be safely converted to bool if
needed by bindings.
Solution: as libzmq already provides this across all platforms,
expose an atomic counter API. I've not wrapped atomic pointers,
though someone who needs this may want to do so.
Solution: set defaults back to infinity, and add new context
option, ZMQ_BLOCKY that the user can set to false to get a
less surprising behavior on context termination. Eg.
zmq_ctx_set (ctx, ZMQ_BLOCKY, false);
This commit adds a ZMQ_POLLPRI flag that maps to poll()'s POLLPRI
flag.
This flags does nothing for OMQ sockets. It's only useful for raw
file descriptor (be it socket or file).
This flag does nothing if poll() is not the underlying polling
function. So it is Linux only.
Users who need e.g. zmq_curve_keypair() have to remember to include
zmq_utils.h, which is counter-intuitive. The whole library should be
represented by a single include file.
Solution: merge all contents of zmq_utils.h into zmq.h, and deprecate
zmq_utils.h. Existing apps can continue unchanged. New apps can ignore
zmq_utils.h completely.
This is still raw and experimental.
To connect through a SOCKS proxy, set ZMQ_SOCKS_PROXY socket option on
socket before issuing a connect call, e.g.:
zmq_setsockopt (s, ZMQ_SOCKS_PROXY,
"127.0.0.1:22222", strlen ("127.0.0.1:22222"));
zmq_connect (s, "tcp://127.0.0.1:5555");
Known limitations:
- only SOCKS version 5 supported
- authentication not supported
- new option is still undocumented
As libzmq is compiled with optional transports and security mechanisms,
there is no clean way for applications to determine what capabilities
are actually available in a given libzmq instance.
Solution: provide an API specifically for capability reporting. The
zmq_has () method is meant to be open ended. It accepts a string so
that we can add arbitrary capabilities without breaking existing
applications.
zmq.h also defines ZMQ_HAS_CAPABILITIES when this method is provided.
Added modifiers reflect the following properties:
- zmq_msg_gets () does not mutate property parameter
- zmq_msg_gets () returns a pointer to memory the caller should not
modify
Specifically:
* zmq_event_t should not be used internally in libzmq, it was
meant to be an outward facing structure.
* In 4.x, zmq_event_t does not correspond to monitor events, so
I removed the structure entirely.
* man page for zmq_socket_monitor is incomplete and the example
code was particularly nasty.
* test_monitor.cpp needed rewriting, it was not clean.
The new options allows querying the maximum allowed number of sockets.
This is system dependent and cannot be encoded in the include file as a
preprocessor macro: for ZMQ_USE_SELECT, this depends on the FD_SETSIZE
macro at time of library compilation, not at time of include file use.
- renamed to ZMQ_CONNECT_RID
- fixed whitespace malformating around previous patch
- renamamed next_peer_id to next_rid in preparation for
larger rename of IDENTITY to ROUTING_ID
Note: ZMQ_CONNECT_RID has no test case and no entry in the man
page, as yet.
This change simply provides the user with a socket option that sets a user defined name of the next outbound connection:
zmq_setsockopt(routerSock,ZMQ_NEXT_IDENTITY,"myname",6);
if(0 > zmq_connect(routerSock,"tcp://127.0.0.1:1234")) return 1;
ret = zmq_send(routerSock,"myname",6,ZMQ_SNDMORE);
zmq_send(routerSock,b.mem,b.used,0);
In this example, the socket is immediately given the name "myname", and is capable of immediately sending traffic.
This approach is more effective in three ways:
1) It prevents all sorts of malicious peer naming attacks that can cause undefined behavior in existing ROUTER connections. (Two connections are made that both transmit the same name to the ROUTER, the ROUTER behavior is undefined)
2) It allows immediate control of connections made to external parties for STREAM sockets. Something that is not possible right now. Before an outbound connection had no name for STREAM or ROUTER sockets because outbound connections cannot be sent to without first receiving traffic.
3) It is simpler and more general than expecting two ROUTER sockets to handshake on assigned connection names. Plus it allows inline sending to new connections on ROUTER.
- This seems redundant; is there a use case for NOT providing
the IPC credentials to the ZAP authenticator?
- More, why is IPC authentication done via libzmq instead of ZAP?
Is it because we're missing the transport type on the ZAP request?
Another take on LIBZMQ-568 to allow filtering IPC connections, this time
using ZAP. This change is backward compatible. If the
ZMQ_ZAP_IPC_CREDS option is set, the user, group, and process IDs of the
peer process are appended to the address (separated by colons) of a ZAP
request; otherwise, nothing changes. See LIBZMQ-568 and zmq_setsockopt
documentation for more information.
* ZMQ_REQ_STRICT was negative option (default 1) which goes against
the standard, where defaults are zero. I renamed this to
ZMQ_REQ_RELAXED.
* ZMQ_REQ_REQUEST_IDS felt clumsy and describes the technical solution
rather than the problem/requirement. I changed to ZMQ_REQ_CORRELATE
which seems more explicit.
* Removed redundant Z85 code and include files from project
* Simplified use of headers in test cases (now they all just use testutil.hpp)
* Export zmq_z85_encode() and zmq_z85_decode() in API
* Added man pages for these two functions
* This is passed to the ZAP handler in the 'domain' field
* If not set, or empty, then NULL security does not call the ZAP handler
* This resolves the phantom ZAP request syndrome seen with sockets where
security was never intended (e.g. in test cases)
* This means if you install a ZAP handler, it will not get any requests
for new connections until you take some explicit action, which can be
setting a username/password for PLAIN, a key for CURVE, or the domain
for NULL.
- Split off NULL security check from PLAIN
- Cleaned up test_linger code a little
- Got all tests to pass, added TODOs for outstanding issues
- Added ZAP authentication for NULL test case
- NULL mechanism was not passing server identity - fixed
- cleaned up test_security_plain and removed option double-checks (made code ugly)
- lowered timeout on expect_bounce_fail to 150 msec to speed up checks
- removed all sleeps from test_fork and simplified code (it still passes :-)
This allows making a new request on a REQ socket by sending a new
message. Without the option set, calling send() after the first message
is done will continue to return an EFSM error.
It's useful for when a REQ is not getting a response. Previously that
meant creating a new socket or switching to DEALER.
* Documentation:
The default behavior of REQ sockets is to rely on the ordering of messages
to match requests and responses and that is usually sufficient. When this option
is set to 1, the REQ socket will prefix outgoing messages with an extra frame
containing a request id. That means the full message is (request id, 0,
user frames...). The REQ socket will discard all incoming messages that don't
begin with these two frames.
* Behavior change: When a REQ socket gets an invalid reply, it used to
discard the message and return EAGAIN. REQ sockets still discard
invalid messages, but keep looking at the next one automatically
until a good one is found or there are no more messages.
* Add test_req_request_ids.
- designed for TCP clients and servers
- added HTTP client / server example in tests/test_stream.cpp
- same as ZMQ_ROUTER + ZMQ_ROUTER_RAW + ZMQ_ROUTER_MANDATORY
- includes b893ce set ZMQ_IDENTITY on outgoing connect
- deprecates ZMQ_ROUTER_RAW
- ZMQ_CURVE_PUBLICKEY for clients and servers
- ZMQ_CURVE_SECRETKEY for clients
- ZMQ_CURVE_SERVERKEY for clients
- ZMQ_CURVE_SERVER for servers
- added tools/curve_keygen.c as example
- updated man pages
* ZMQ_PLAIN_SERVER, ZMQ_PLAIN_USERNAME, ZMQ_PLAIN_PASSWORD options
* Man page changes to zmq_setsockopt and zmq_getsockopt
* Man pages for ZMQ_NULL, ZMQ_PLAIN, and ZMQ_CURVE
* Test program test_security
Copyrights had become ads for Sustrik's corporate sponsors, going against the original
agreement to share copyrights with the community (that agreement was: one line stating
iMatix copyright + one reference to AUTHORS file). The proliferation of corporate ads
is also unfair to the many individual authors. I've removed ALL corporate title from
the source files so the copyright statements can now be centralized in AUTHORS and
source files can be properly updated on an annual basis.
- New ZMQ_STATIC flag to enable "libzmq.lib" Windows static library (or "libzmq_d.lib" in Debug mode).
- ZMQ_STATIC needs also to be defined by projects using static linking against "libzmq.lib"
- New StaticDebug & StaticRelease configurations for libzmq Win32 projects under MSVC 2008 & 2010
- Tested with Visual Studio 2008 Express under Windows 7, and Visual Studio 2010 Express under Windows 8.
- when compiling for Windows CE, a C++ project must define the preprocessor definitions: UNDER_CE=$(CEVersion),_WIN32_WCE=$(CEVersion)
- choosing the "_WIN32_CE" form for uniformization with "_WIN32" and "_WIN32_WINNT" already used in libzmq (boost is using both forms)
- see http://msdn.microsoft.com/en-us/library/ee479161(v=winembedded.60).aspx
Until now, zmq_poll always allocates the poll items on the heap.
Now, small item sets, up to ZMQ_POLLITEMS_DFLT, are stack allocated
and only larger sets are allocated on the heap.
- Created a new option ZMQ_ROUTER_RAW_SOCK
- Added new raw_encoder and raw_decoder to receive and send messages in raw form to remote client
- Added test case file tests/test_raw_sock.cpp
o To create a raw router sock set the ZMQ_ROUTER_RAW_SOCK option
o ZMQ_MSGMORE flag is ignored for non-id messages
o To terminate a remote connection send id message followed by zero length data message
avoids warnings of the form:
warning: 'struct iovec' declared inside parameter list
warning: its scope is only this definition or declaration, which is probably not what you want
when building downstream projects
This patch, salvaged from a trainwreck accidental merge earlier, adds a
new sockopt, ZMQ_DELAY_ATTACH_ON_CONNECT which prevents a end point
being available to push messages to until it has fully connected, making
connect work more like bind. This also applies to reconnecting sockets,
which may cause message loss of in-queue messages, so it is sensible to
use this in conjunction with a low HWM and potentially an alternative
acknowledgement path.
Notes on most of the individual commits can be found the repository log.
This patch adds a sockopt ZMQ_DELAY_ATTACH_ON_CONNECT, which if set to 1 will attempt to preempt this behavior. It does this by extending the use of the session_base to include in the outbound as well as the inbound pipe, and only associates the pipe with the socket once it receives the connected callback via a process_attach message. This works, and a test has been added to show so, but may introduce unexpected complications. The shutdown logic in this class has become marginally more awkward because of this, requiring the session to serve as the sink for both pipes if shutdown occurs with a still-connecting pipe in place. It is also possible there could be issues around flushing the messages, but as I could not directly think how to create such an issue I have not written any code with regards to that.
The documentation has been updated to reflect the change, but please do check over the code and test and review.
Assign arbitrary number of filters that will be applied for each new TCP transport
connection on a listening socket.
If no filters applied, then TCP transport allows connections from any ip.
If at least one filter is applied then new connection source ip should be matched.
To clear all filters call zmq_setsockopt(socket, ZMQ_TCP_ACCEPT_FILTER, NULL, 0).
Filter is a null-terminated string with ipv6 or ipv4 CIDR.
For example:
localhost
127.0.0.1
mail.ru/24
::1
::1/128
3ffe:1::
3ffe:1::/56
Returns -1 if the filter couldn't be assigned(format error or ipv6 filter with ZMQ_IPV4ONLY set)
P.S.
The only thing that worries me is that I had to re-enable 'default assign by reference constructor/operator'
for 'tcp_address_t' (and for my inherited class tcp_address_mask_t) to store it in std::vector in 'options_t'...
* Implemented new ctx API (_new, _destroy, _get, _set)
* Removed 'typesafe' macros from zmq.h
* Added support for MAX_SOCKETS (was tied into change for #337)
* Created new man pages
* Added two new files: errno.hpp and errno.cpp. They are required to use errno functionality on WM.
* zmq.cpp, msg.h: removed inclusion of errno.h because it is included in zmq.h that is also included by .cpp.
* windows.hpp: process.h is included only for desktop builds.
* thread.cpp: on CE CreateThread is used instead of __beginthreadex
* socket_base.cpp, clock.cpp: on CE include cmnintrin.h instead on intrin.h
* signaler.cpp: on Windows should use special macro around event name (for unicode builds)
* err.hpp: make it include errno.hpp (my file) instead on errno.h when building for CE
* err.cpp: use FormatMessage when building for CE (because CE does not have ANSI API functions)
* zmq.h: do not include errno.h whe building for CE
* libzmq.vcproj: add tro new files
We have to use an incomplete type in the interface.
The definition of iovec is only in the implementation.
This appears to following existing practice in 0MQ.
It seems a bit flakey that zmq.h is not included in zmq.cpp,
which is normal practice to ensure the implementation matches
the specified interface. YMMV. I follow 0MQ style.
Also move iovec definition from implementation to interface.
Not clear to me at present if an incomplete type should
be used to avoid gratuitously including <sys/uio.h> in
the interface. The interface can't be used with this include.
We use a distinct context initialisation function to specify
all sockets derived therefrom will be thread safe.
However the inheritance is done exclusively in the C interface.
This is not really correct, but it is chosen to minimise
interference with the existing C++ code, including any
construct or other calls within the C++ code base.
Semantically the C++ code should be unchanged,
physically some data structures and extra methods are
provided by they're only used from the C binding.
The new function allows to retrieve options (flags)
from zmq_msg_t.
Signed-off-by: Chuck Remes <cremes@mac.com>
Renamed from zmq_msg_flags to zmq_getmsgopt
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
This version downgrade is done because of the previous refatoring.
It removed all the new features and reintroduced some of the old
ones (identities). Thus, it made trunk much closer to existing 3.0
branch than it used to be.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
