- MacOS version requires CMake version 3.0.2 (because of policy CMP0042)
- Add option to build instrumented binaries with Address Sanitizer
- Add option to select compiler intrinsics for atomic ops
- Only build docs on request (saves build time)
- Lowercase all commands
- Unify indent to 2 spaces
- Remove spaces around brackets
- Remove repitition of condition in else(...) and endif(...)
Note: (re-)running CMake did not change the content of the generated files
* Problem: No CI for mingw64
Adding CI support for mingw64 to appveyor.yml
Reason: To help address the issue:
Several checks fail under 64-bit MinGW on Windows when running make check #3185
* Problem: Docs do not build with mingw64, dll already in right place
Turning off WITH_DOC for mingw64
Removing copy command for mingw64 and cygwin64 (it now seems to be directly built in "bin" directoy)
Solution: Use cmake's libdir variable to ensure that the pkgconfig file
ends up in the correct lib/lib64 directory. This matches the autotools
behaviour.
Solution: ignore tautological-constant-compare warnings, as they
might be useless on 64 bit but they are not on 32 bit where sizeof
size_t != sizeof uint64_t
Problem: When building libzmq with CMake, the installed libzmq.dylib
has a relative install name (otool -D libzmq.dylib) on MacOS. This
is a regression against building via autotools which sets an
absolute install name. Effectively, the CMake built libzmq.dylib
is rendered useless if installed in non-system directories and
used in environments without explicit DYLD_LIBRARY_PATH mgmt. For
example running any of the installed executables currently fails:
$ /some_install_prefix/bin/inproc_lat
dyld: Library not loaded: libzmq.5.dylib
Referenced from: /some_install_prefix/bin/inproc_lat
Reason: image not found
Trace/BPT trap: 5
Solution: Best practice is to install relocatable dylibs.
On MacOS this means setting an install name with a special prefix,
e.g. @rpath/libzmq.dylib, and adding the relevant search paths
to the embedded rpath list. In this patch the necessary CMake options
are added to generate the desired relocatable dylibs. Find more
information on: https://cmake.org/Wiki/CMake_RPATH_handling.
Solution: remove objects optimisation in library build (similar to #2860)
and set PUBLIC compile definitions on all static builds instead of MSVC
only.
Solution: change case of `WinSock2.h Iphlpapi.h Rpc.h` to match the
files on disk. This is only noticeable when cross-compiling from a
case-sensitive system so wouldn't get picked up in MSVC or mingw
builds running on a windows machine.
MSDN uses capitalised versions in prose and lowercase in code examples:
https://msdn.microsoft.com/en-us/library/windows/desktop/ms737629(v=vs.85).aspxFixes#2978, the missing library message is a little misleading.
This fixes an error with the cmake install configuration, which
attempted an invalid copy of a .pdb file on windows, when the
BUILD_SHARED option is disabled.
Solution: revert the objects optimisation, and go back to building
everything twice on Windows, as the static builds needs different
preprocessor definitions from the shared one, so the objects have to be
rebuilt.
Keep the optimisation for all the other platforms.
Fixes#2858
* Background thread scheduling
- add ZMQ_THREAD_AFFINITY ctx option; set all thread scheduling options
from the context of the secondary thread instead of using the main
process thread context!
- change ZMQ_THREAD_PRIORITY to support setting NICE of the background
thread when using SCHED_OTHER
Linux now supports Virtual Routing and Forwarding (VRF) as per:
https://www.kernel.org/doc/Documentation/networking/vrf.txt
In order for an application to bind or connect to a socket with an
address in a VRF, they need to first bind the socket to the VRF device:
setsockopt(sd, SOL_SOCKET, SO_BINDTODEVICE, dev, strlen(dev)+1);
Note "dev" is the VRF device, eg. VRF "blue", rather than an interface
enslaved to the VRF.
Add a new socket option, ZMQ_BINDTODEVICE, to bind a socket to a device.
In general, if a socket is bound to a device, eg. an interface, only
packets received from that particular device are processed by the socket.
If device is a VRF device, then subsequent binds/connects to that socket
use addresses in the VRF routing table.
Solution: we can use 'CMAKE_SYSTEM_VERSION' instead of
'${CMAKE_SYSTEM_VERSION}' for the 'if' clauses.
CMake fails to evaluate condition when CMAKE_SYSTEM_VERSION is
empty, which can happen with a default installation of Mingw-w64
in Linux.
Some #define switches cause the body of entire files to be omitted. This
causes a linker warning on Visual Studio 2017, for example
warning LNK4221: This object file does not define any previously
undefined public symbols, so it will not be used by any link
operation that consumes this library
Since this is warning us about something that shouldn't be
earth-shattering news, we add a linker flag to suppress this warning on
MSVC builds.
Add two new options to CMakeLists.txt:
`BUILD_SHARED` - Whether or not to build the shared object (Default: ON)
`BUILD_STATIC` - Whether or not to build the static archive (Default: ON)
Remove the `build/msvc` include path from the test project to fix a
problem with the order of the include paths. Additionally remove the
unnecessary `include_directories` from the master project.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
* add define for windows/UWP
* prevent issue with COM references
* gettickcount not available on uwp
* add compiler definitions
* add convenitnece cmake file
* brute force uwp compilation
* fix compiler version
* cosmetics
Solution: use pthread API to set the name. For now call every thread
"ZMQ b/g thread". Would be nice to number the I/O threads and name
explicitly the reaper thread, but in reality a bit of internal API
churn would be necessary, so perhaps it's not worth it.
This is useful when debugging a process with many threads.
Solution: set SOVERSION in CMakeLists to match the SONAME generated
by libtool so that there is no mismatch between the output of the
*NIX build systems.
Before:
$ ls -l
total 2696
lrwxrwxrwx 1 luca luca 15 Dec 1 22:36 libzmq.so -> libzmq.so.4.2.0
lrwxrwxrwx 1 luca luca 15 Dec 1 22:36 libzmq.so.4.2.0 -> libzmq.so.4.2.1
-rwxr-xr-x 1 luca luca 906168 Dec 1 22:36 libzmq.so.4.2.1
$ readelf -d libzmq.so.4.2.1 | grep SONAME
0x000000000000000e (SONAME) Library soname: [libzmq.so.4.2.0]
After:
$ ls -l
total 2700
lrwxrwxrwx 1 luca luca 15 Dec 1 22:31 libzmq.so -> libzmq.so.5.1.0
-rwxr-xr-x 1 luca luca 906168 Dec 1 22:31 libzmq.so.4.2.1
lrwxrwxrwx 1 luca luca 15 Dec 1 22:31 libzmq.so.5.1.0 -> libzmq.so.4.2.1
$ readelf -d libzmq.so.4.2.1 | grep SONAME
0x000000000000000e (SONAME) Library soname: [libzmq.so.5.1.0]
Solution: use only Libs.private to avoid breaking application builds.
Even though Requires.private are supposed to be parsed only if
pkg-config is called with --static, the --cflags parameter is enough
to trigger the parsing, causing build failures for applications that
do not (and should not) depend on libzmq's dependencies.
Solution: add dependencies, if necessary, to the .private Libs and
Requires field of the pkgconfig file at build time.
This way pkg-config --static --libs libzmq will correctly print
dependencies if they were used to build the static libzmq.a library.
