Problem: zmq_setsockpt() returns success when changing the
HWM after a bind or connect() even though the call has no effect.
Solution: Introduce a failing test a reminder we need to patch it.
Of course people still "can" distributed the sources under the
LGPLv3. However we provide COPYING.LESSER with additional grants.
Solution: specify these grants in the header of each source file.
When targeting a version of Windows less than Windows Vista, the
security tests fail to build. Added a check for Windows version
and substituted inet_pton for inet_addr. Fixes libzmq issue #1396.
ZMQ_INVERT_MATCHING reverses the PUB/SUB prefix matching. The subscription
list becomes a rejection list. The PUB socket sends messages to all
connected (X)SUB sockets that do not have any matching subscription.
Whenever the option is used on a PUB/XPUB socket, any connecting SUB
sockets must also set it or they will reject everything the publisher
sends them. XSUB sockets are unaffected because they do not filter out
incoming messages.
Symptom is that ZMQ_STREAM sockets in 4.1.0 and 4.1.1 generate zero
sized messages on each new connection, unlike 4.0.x which did not do
this.
Person who made this commit also changed test cases so that contract
breakage did not show. Same person was later banned for persistently
poor form in CZMQ contributions.
Solution: enable connect notifications on ZMQ_STREAM sockets using a
new ZMQ_STREAM_NOTIFY setting. By default, socket does not deliver
notifications, and behaves as in 4.0.x.
Fixes#1316
Allows non-C/C++ based clients easy access to the peer's IP address via
zmq_msg_gets(&msg, "Peer-Address") instead of zmq_msg_get(&msg, ZMQ_SRCFD)
followed by calls to getpeername and getnameinfo
zmq_atomic_counter_dec returned a 'bool' value, yet this isn't
defined by standard, so causes compile errors in upstream code.
Solution: return an int that can be safely converted to bool if
needed by bindings.
Solution: as libzmq already provides this across all platforms,
expose an atomic counter API. I've not wrapped atomic pointers,
though someone who needs this may want to do so.
Solution: set defaults back to infinity, and add new context
option, ZMQ_BLOCKY that the user can set to false to get a
less surprising behavior on context termination. Eg.
zmq_ctx_set (ctx, ZMQ_BLOCKY, false);
Solution: change setsockopts on printable keys to expect 41, nor 40
bytes. Code still accepts 40 bytes for compatibility, and copies the
key to a well-terminated string before using it.
Fixes#1148
Users who need e.g. zmq_curve_keypair() have to remember to include
zmq_utils.h, which is counter-intuitive. The whole library should be
represented by a single include file.
Solution: merge all contents of zmq_utils.h into zmq.h, and deprecate
zmq_utils.h. Existing apps can continue unchanged. New apps can ignore
zmq_utils.h completely.
Since https://github.com/zeromq/libzmq/commit/350a1a, TCP addresses
get resolved asynchronously, so zmq_connect no longer returned an
error on incorrect addresses.
This is troublesome since we rely on some error checking to catch
blatant errors.
Solution add some upfront syntax checking that catches at least the
obvious kinds of errors (invalid characters, wrong or missing port
number).
As libzmq is compiled with optional transports and security mechanisms,
there is no clean way for applications to determine what capabilities
are actually available in a given libzmq instance.
Solution: provide an API specifically for capability reporting. The
zmq_has () method is meant to be open ended. It accepts a string so
that we can add arbitrary capabilities without breaking existing
applications.
zmq.h also defines ZMQ_HAS_CAPABILITIES when this method is provided.
The expect_bounce_fail () helper assumed that messages could always
be sent. However in some cases zmq_send() blocks, due to there not
being any outgoing pipe. This changed in 77f5f7, where previously
there would be a pipe that kept trying to reconnect forever.
Solution: use a send timeout and check for EAGAIN if sending failed.
There is a race condition when connect and bind on a new inproc
endpoint happen "simultaneously" in threads. Causes the error:
Assertion failed: ok (ctx.cpp:474)
Using 'ipc://@abstract-socket' on non-Linux platforms yields inconsistent
behaviour. Abstract sockets don't exist, so the literal file is created.
The test previously failed, but for a different reason: this is not the
directory you are looking for. Now, zmq_bind() will fail for the right
reason: the socket can't be created. Put the XFAIL back.
fork() support is optional and its availability is correctly detected at
contfigure time.
But test_fork was all always built, preventing build for targets that do
not provide fork() from building successfully.
This pacth fixes the autotools on this point.
Has some bits commented out due to #939, now work.
Note: there is an issue in libzmq when binding/unbinding or
connecting/disconnecting (I did not investigate deeper) the
same socket several times. Even closing the socket with zero
linger, zmq_ctx_term will block. The workaround in this test
case is to close the sockets for each test step.
Specifically:
* zmq_event_t should not be used internally in libzmq, it was
meant to be an outward facing structure.
* In 4.x, zmq_event_t does not correspond to monitor events, so
I removed the structure entirely.
* man page for zmq_socket_monitor is incomplete and the example
code was particularly nasty.
* test_monitor.cpp needed rewriting, it was not clean.
- this failing test was confusing users
- ZMTP v3.0 now does not define resources at all
- resources, along with other unimplemented aspects moved to
RFC 37 ZMTP v3.1
The new options allows querying the maximum allowed number of sockets.
This is system dependent and cannot be encoded in the include file as a
preprocessor macro: for ZMQ_USE_SELECT, this depends on the FD_SETSIZE
macro at time of library compilation, not at time of include file use.
- renamed test_stream_disconnect_notifications (too long!)
- removed print statements in that test case
- fixed Makefile.am for test_zap_ipc_creds (was not building)
When a ZMQ_STREAM socket connection is broken (intentionally, via `shutdown()`
or accidentally via client crash or network failure), there is no way for the
application to dertermine that it should drop per-connection data (such as
buffers).
This contribution makes sure the application receives a 0-length message to
notify it that the connection has been broken. This is symmetric with the
process of closing the connection from within the application (where the
application sends a 0-length message to tell ZeroMQ to close the connection).
Conflicts:
CMakeLists.txt
This fixes the test on Mac OS X and SmartOS (probably other Solarises).
Also updates the sockets using ipc: to use DEALER sockets instead
of PAIR sockets.
- This seems redundant; is there a use case for NOT providing
the IPC credentials to the ZAP authenticator?
- More, why is IPC authentication done via libzmq instead of ZAP?
Is it because we're missing the transport type on the ZAP request?
Another take on LIBZMQ-568 to allow filtering IPC connections, this time
using ZAP. This change is backward compatible. If the
ZMQ_ZAP_IPC_CREDS option is set, the user, group, and process IDs of the
peer process are appended to the address (separated by colons) of a ZAP
request; otherwise, nothing changes. See LIBZMQ-568 and zmq_setsockopt
documentation for more information.
- used msleep (10) in most places instead of zmq_sleep (1)
- may cause failures on slower machines
- to change, modify SETTLE_TIME in testutil.h
- tested down to 1 msec on fast boxes
As TIPC transport for 0MQ will only work on post 3.8
Linux kernels where nonblocking connect was added,
we add AC_RUN test to check for this functionality.
Should the test fail, tipc is excluded from build/test.
Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
* ZMQ_REQ_STRICT was negative option (default 1) which goes against
the standard, where defaults are zero. I renamed this to
ZMQ_REQ_RELAXED.
* ZMQ_REQ_REQUEST_IDS felt clumsy and describes the technical solution
rather than the problem/requirement. I changed to ZMQ_REQ_CORRELATE
which seems more explicit.
* ZAP handler thread was not getting time to start up
* Code now creates and binds handler socket in parent thread and
passes the socket to the zap_handler, so this always gets the
authentication requests.
* Removed redundant Z85 code and include files from project
* Simplified use of headers in test cases (now they all just use testutil.hpp)
* Export zmq_z85_encode() and zmq_z85_decode() in API
* Added man pages for these two functions
