Solution: add some msg helpers to parse commands, and check for
subscribe or cancel commands and process them accordingly in the xpub
and xsub classes.
* always run tests from tarball of `make dist`
ensures that tests will not pass if critical files are omitted from releases
* add explicit make dist only for non-default builds
distcheck should already cover this for default builds
* don’t verify that valgrind/coverage tests can be run from dists
* add various files missing from dists
- missing template from cmake
- add missing android build files
- add some missing ci_build.sh scripts
Lets the application set per-connection metadata.
Metadata is specified as "X-key:value" and set using zmq_setsockopt, eg:
zmq_setsockopt (s, ZMQ_METADATA, "X-key:value", 11);
The peer can then obtain the metadata from a received message:
char *data = zmq_msg_gets(msg, "X-key");
* Tests for different TIPC address types and code cleanup
* Adds tests for binding/connecting with different TIPC address types
using Unity
* Adds error checking for address type misuse
Solution: when a connection breaks and ZMQ_RECONNECT_IVL is set to -1,
which means a reconnection will not be attempted, send a message from
the I/O thread to the application thread to make the socket call
term_endpoint, which is the equivalent of manually calling
zmq_disconnect.
This way subsequent zmq_connect call to the same endpoint will attempt
again to do a connection.
Otherwise, for some socket types like SUBs, those new connects will
fail as the endpoint is recorded, despite the connection having been
permanently closed.
Add test cases to exercise this corner case with TCP and IPC.
* Extracted connect_vanilla_socket function
* Problem: no tests for ZMTP-CURVE protocol errors
Solution: added two test cases with erroneous HELLO commands
* Problem: insufficient tests for ZMTP-CURVE protocol errors
Solution: added two test cases with erroneous HELLO command version
* Problem: test HELLO message is invalid apart from deliberate errors
Solution: create cryptographically correct HELLO message
add tweetnacl.c to test_security_curve
* Problem: nonce is incorrect, build fails with GCC
Solution: use correct non prefix
* Problem: make builds are failing
Solution: transfer CMake changes to (auto)make files
* Problem: nonce is incorrect, build fails with GCC
Solution: use correct non prefix
* Problem: make builds are failing
Solution: transfer CMake changes to (auto)make files
* Problem: no test with INITIATE command with invalid length
Solution: added test case
* Problem: code duplication between test_security_curve.cpp and curve_client.cpp
Solution: extracted parts of zmq::curve_client_t::produce_hello into reusable function
* Problem: code duplication between test_security_curve.cpp and curve_client.cpp
Solution: extracted further parts of zmq::curve_client_t into reusable functions
added missing file
* Problem: mechanism_t::add_property can be declared static
Solution: declare mechanism_t::add_property static
* Problem: intermediate crypto data needs to be passed between static function calls to curve_client_tools_t
Solution: add non-static member functions
* Problem: msg_t instance may be closed twice
Solution: remove offending close
* Problem: prepare_hello uses static curve_client_tools_t::produce_hello
Solution: Use non-static curve_client_tools_t::produce_hello
* Problem: no test with invalid command name where INITIATE command is expected
Solution: added test case
* Problem: make builds are failing due to curve_client_tools.hpp not being found
Solution: add curve_client_tools.hpp to list of source files
* Problem: wrong initializer order in zmq::curve_client_t
Solution: reorder
* Problem: under non-Windows systems, test fails because random_open was not called
Solution: call random_open/random_close within test
* Problem: conflict between custom function htonll and macro definition on Darwin
Solution: define htonll function only if not defined as a macro
* Problem: nullptr not defined on all platforms
Solution: replace nullptr by NULL
* Problem: libsodium builds not working
Solution: adapt compile and link file sets for libsodium builds
* Problem: Makefile.am broken
Solution: Fix syntax
* Problem: no tests for garbage encrypted cookie or content in INITIATE
Solution: added test cases
* Problem: test cases accidentally excluded from build
Solution: remove #if/#endif
* Solution: some error cases are unreachable
Problem: for the time being, added some comments without changing the code
* Added comments on hard-to-test cases
Problem: there is no test coverage for GSSAPI.
Solution: add a test structured like the CURVE test.
The test is not built if libzmq is not configured with
--with-libgssapi_krb5. It will report SKIPPED status
if the required environment is missing (see below).
Environment: KRB5_KTNAME and KRB5_CLIENT_KTNAME
environment variables must point to a keytab file
containing creds for a host-based test principal
(see comment at top of source for details).
Kerberos must be configured and a KDC containing the
test principal must be running, otherwise the test
will fail/hang.
N.B. For now, the test must use the same principal for
both client and server roles because it seems impossible
to set them to different principals when they are
threads in the same process. Once one principal is
cached in credential cache, attempts to acquire creds
for a different "desired name" seem to be ignored and
the cached principal is used instead.
Solution:
- Add file for testing ancillary API methods and any misc internal machinery
- Add tests for zmq_version(3) and zmq_strerror(3)
- Add test file into gitignore, Autotools and CMake build files
- Increase test coverage
Note:
MSVC solution files have not been updated.
Problem: Since pull request #1730 was merged, protocol for REQ socket is
checked at the session level and this check does not take into account
the possibility of a request_id being part of the message. Thus the option
ZMQ_REQ_CORRELATE would no longer work.
This is now fixed: the possiblity of a 4 bytes integer being present
before the delimiter frame is taken into account (whether or not this
breaks the REQ/REP RFC is another issue).
Solution: do not run test_fork if --enable-valgrind is set. Note that
later versions of Valgrind (3.11) not yet available in all
distributions fix this problem, so we might revert in the future.
Solution: update builds/valgrind/valgrind.supp to ignore glibc's
__libc_freeres calls. This code runs after the program exits, and
tries to de-allocate memory allocated internally by glibc, so it has
nothing to do with libzmq code. This suppression is added by default
in newer versions of Valgrind, not yet available on older
distributions.
Solution: import ax_valgrind_check.m4 macro file to provide a
conveniente automake hook to run Valgrind on all tests.
Add --enable-valgrind to ./configure call and then run make
check-valgrind to run memcheck, helgrind, drd and sgcheck on all
tests. Run check-valgrind-memcheck to run only memcheck.
Solution: remove temporarily until proper message limits have been
implemented, then a more granular test case can be added without
such high requirements which are problematic in embedded environment,
build systems, VMs and CI systems
Solution: import ax_code_coverage.m4 from autoconf-archive and use it
in configure.ac and Makefile.am in order to provide a make
check-code-coverage target behind a --enable-code-coverage configure
flag, that can be used to generate a gcov/lcov code coverage report.
Depends on having gcov and lcov installed.
I'm adding gyp support so that we can easily pull in libzmq
and other C/C++ projects into gyp packages, especially via
node-gyp.
Solution: add gyp definition
This works only for Windows, OS/X, and Linux. We set a single
macro in project.gyp according to the system, and the rest is
done in builds/gyp/platform.hpp. The values in that file are
not dynamic. Your mileage will vary.
- they have no copyright / license statement
- they are in some randomish directory structure
- they are a mix of postable and non-portable files
- they do not conform to conditional compile environment
Overall, it makes it rather more work than needed, in build scripts.
Solution: clean up tweetnacl sauce.
- merged code into single tweetnacl.c and .h
- standard copyright header, DJB to AUTHORS
- moved into src/ along with all other source files
- all system and conditional compilation hidden in these files
- thus, they can be compiled and packaged in all cases
- ZMQ_USE_TWEETNACL is set when we're using built-in tweetnacl
- HAVE_LIBSODIUM is set when we're using external libsodium
It's unclear which we need and in the source code, conditional code
treats tweetnacl as a subclass of libsodium, which is inaccurate.
Solution: redesign the configure/cmake API for this:
* tweetnacl is present by default and cannot be enabled
* libsodium can be enabled using --with-libsodium, which replaces
the built-in tweetnacl
* CURVE encryption can be disabled entirely using --enable-curve=no
The macros we define in platform.hpp are:
ZMQ_HAVE_CURVE 1 // When CURVE is enabled
HAVE_LIBSODIUM 1 // When we are using libsodium
HAVE_TWEETNACL 1 // When we're using tweetnacl (default)
As of this patch, the default build of libzmq always has CURVE
security, and always uses tweetnacl.
Solution: parse the value set by the ZMQ_PRE_ALLOCATED_FD sockopt
when creating a new TCP socket and use it if valid.
Add new tests/test_pre_allocated_fd_tcp.cpp unit test.
Solution: parse the value set by the ZMQ_PRE_ALLOCATED_FD sockopt
when creating a new IPC socket and use it if valid.
Add new tests/test_pre_allocated_fd_ipc.cpp unit test.
VMCI transport allows fast communication between the Host
and a virtual machine, between virtual machines on the same host,
and within a virtual machine (like IPC).
It requires VMware to be installed on the host and Guest Additions
to be installed on a guest.
Solution: specify the necessary EXTRA_DIST
I added a Makefile.am in builds that covers all systems except msvc,
which already has a Makefile.am that does this.
Fixes#1505
A memcpy is eliminated when receiving data on a ZMQ_STREAM socket. Instead
of receiving into a static buffer and then copying the data into the
buffer malloced in msg_t::init_size, the raw_decoder allocates the memory
for together with the reference-counter and creates a msg_t object
on top of that memory. This saves the memcpy operation.
For small messages, data is still copied and the receive buffer is reused.
The shared reference count was not shared but copied. msg_t cannot
store the refcnt itsef but has to store a pointer to an externally
allocated (shared) refcnter. The changes to lmsg are reverted to
use content_t again. Howver, this introduces an allocation in v2_decoder
when creating the message which can be avoided. When allocating the reception
buffer, space is allocated for the maximum number of reference counts
(8192 / max_vsm_size = 8192/64 = 128 zmq:atomic_counter objects). This
increases the buffer by 128*sizeof(atomic_counter) = 128*4 = 512 bytes only.
When creating a message, the refcnt member is set to the address of one of the
pre-allocated atomic_counter_t objects. To do so, a new msg_t type zcmsg
is introduced because msg::copy must discriminate between the message types
when releasing memory.
