Of course people still "can" distributed the sources under the
LGPLv3. However we provide COPYING.LESSER with additional grants.
Solution: specify these grants in the header of each source file.
Solution: set defaults back to infinity, and add new context
option, ZMQ_BLOCKY that the user can set to false to get a
less surprising behavior on context termination. Eg.
zmq_ctx_set (ctx, ZMQ_BLOCKY, false);
Since https://github.com/zeromq/libzmq/commit/350a1a, TCP addresses
get resolved asynchronously, so zmq_connect no longer returned an
error on incorrect addresses.
This is troublesome since we rely on some error checking to catch
blatant errors.
Solution add some upfront syntax checking that catches at least the
obvious kinds of errors (invalid characters, wrong or missing port
number).
Specifically:
* zmq_event_t should not be used internally in libzmq, it was
meant to be an outward facing structure.
* In 4.x, zmq_event_t does not correspond to monitor events, so
I removed the structure entirely.
* man page for zmq_socket_monitor is incomplete and the example
code was particularly nasty.
* test_monitor.cpp needed rewriting, it was not clean.
V547 Expression 'file_desc >= 0' is always true. Unsigned type value is always >= 0. socket_base.cpp 845
V547 Expression 'file_desc >= 0' is always true. Unsigned type value is always >= 0. socket_base.cpp 863
V547 Expression 'file_desc >= 0' is always true. Unsigned type value is always >= 0. socket_base.cpp 897
http://www.viva64.com/en/d/0137/print/
The get_credential () member function returns
credential for the last peer we received message for.
The idea is that this function is used to implement user-level API.
As TIPC transport for 0MQ will only work on post 3.8
Linux kernels where nonblocking connect was added,
we add AC_RUN test to check for this functionality.
Should the test fail, tipc is excluded from build/test.
Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
A ZeroMQ application can opt for TIPC based sockets
using the TIPC port name format:
zmq_bind(sb, "tipc://{type,lower,upper}");
zmq_connect(sc, "tipc://{type,inst}");
'type' is the service ID, and 'lower/upper' can be
used for service partitioning or basic load
balancing.
ZeroMQ TIPC transport requires a kernel >= 3.8
(nonblocking connect support for TIPC).
Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
icanhasall is cute (for now), but the effect of the variable is clear
only after tracking down its origin reading the commit. This change is
intended to make it easier for people to have some intuition about its
effect from its name.
These were exposed to users, but have subsequently been removed as
sockopts. They are currently only being used by ZAP, so I've moved it to
a simpl function call (actually it's only used in one case even in that,
so there may be a further simplification possible there).
Looks like linger is honoured properly, but shutting down the session
causes the pipe termination to come from that side - because the local
pipe then shuts down right away it seems to trigger a terminated on the
other end instead of waiting. This way we trigger the termination from
the local end and then terminate the session.
- designed for TCP clients and servers
- added HTTP client / server example in tests/test_stream.cpp
- same as ZMQ_ROUTER + ZMQ_ROUTER_RAW + ZMQ_ROUTER_MANDATORY
- includes b893ce set ZMQ_IDENTITY on outgoing connect
- deprecates ZMQ_ROUTER_RAW
Copyrights had become ads for Sustrik's corporate sponsors, going against the original
agreement to share copyrights with the community (that agreement was: one line stating
iMatix copyright + one reference to AUTHORS file). The proliferation of corporate ads
is also unfair to the many individual authors. I've removed ALL corporate title from
the source files so the copyright statements can now be centralized in AUTHORS and
source files can be properly updated on an annual basis.
- when compiling for Windows CE, a C++ project must define the preprocessor definitions: UNDER_CE=$(CEVersion),_WIN32_WCE=$(CEVersion)
- choosing the "_WIN32_CE" form for uniformization with "_WIN32" and "_WIN32_WINNT" already used in libzmq (boost is using both forms)
- see http://msdn.microsoft.com/en-us/library/ee479161(v=winembedded.60).aspx
Compiling without warnings is a good goal, because it makes
new warnings (which probably indicate bugs) stand out rather
than getting lost in the spam.
My fixes fall into two categories:
- Adding (void) casts of unused parameters, where their
unusedness seems like a TODO (or in some cases a bug?).
- Removing parameter names altogether, where the function
is clearly a stub that will never use its parameters.
Should be no change in behavior.
There are three versions of monitor_event(), all taking
variadic arguments. The original code just has the first one
creating a va_list and passing that va_list variadically to
the second one... which creates a new va_list and passes it
variadically to the third one... and of course everything
blows up when we try to pull a non-va_list argument off the
stack.
The correct approach matches the C standard library's use
of printf/vprintf, scanf/vscanf, and so on. Once you make
a va_list, you must pass it only to functions which expect
a va_list parameter.
This patch, salvaged from a trainwreck accidental merge earlier, adds a
new sockopt, ZMQ_DELAY_ATTACH_ON_CONNECT which prevents a end point
being available to push messages to until it has fully connected, making
connect work more like bind. This also applies to reconnecting sockets,
which may cause message loss of in-queue messages, so it is sensible to
use this in conjunction with a low HWM and potentially an alternative
acknowledgement path.
Notes on most of the individual commits can be found the repository log.
It didn't seem straightforward to use any of the existing process calls, so I have added a new command to command_t and friends called detach. This instructs the socket_base to remove the pipe from it's pipe list. The session base stores a copy of the outpipe, and will resend the bind command on reconnection. This should allow balancing again.
This patch adds a sockopt ZMQ_DELAY_ATTACH_ON_CONNECT, which if set to 1 will attempt to preempt this behavior. It does this by extending the use of the session_base to include in the outbound as well as the inbound pipe, and only associates the pipe with the socket once it receives the connected callback via a process_attach message. This works, and a test has been added to show so, but may introduce unexpected complications. The shutdown logic in this class has become marginally more awkward because of this, requiring the session to serve as the sink for both pipes if shutdown occurs with a still-connecting pipe in place. It is also possible there could be issues around flushing the messages, but as I could not directly think how to create such an issue I have not written any code with regards to that.
The documentation has been updated to reflect the change, but please do check over the code and test and review.
I believe there was a conception that zmq_connect() and zmq_bind() will be called
only at the socket creation time and therefore don't need it.
Now it is not true anymore.
1. when we call zmq_bind()/zmq_connect() to create endpoint
we send ourselfs(through launch_child()) command to process_own(endpoint)
(and add it to own_t::owned)
in the application thread we could call zmq_unbind() / zmq_disconnect() _BEFORE_
we run process_own() in ZMQ thread and in this situation we will be unable to find it in
own_t::owned. in other words own_t::owned.find(endpoint) will not be deleted but it will be deleted from
socket_base_t::endpoints.
2. when you zmq_unbind() the lisnening TCP/IPC socket was terminated only in destructor...
so the whole ZMQ_LINGER time listening TCP/IPC socket was able to accept() new connections
but unable to handle them.
this all geting even worse since unfortunately zmq has a bug and '*_listener_t' object not terminated
untill the socket's zmq_close().
AT LEAST FOR PUSH SOCKETS.
Everything is ok for SUB sockets.
Easy to reproduce without my fix:
zmq_socket(PUSH)
zmq_bind(tcp);
// connect to it from PULL socket
zmq_unbind(tcp);
sleep(forever)
// netstat -anp | grep 'tcp listening socket'
With my fix you could see that after zmq_unbind(tcp) all previously connected tcp sessions
will not be finished untill the zmq_close(socket) regardless of ZMQ_LINGER value.
(*_listener_t terminates all owned session_base_t(connect=false) and they call pipe_t::terminate()
which in turn should call session_base_t::terminated() but this never happens)
socket. Thus, it is shared between subsequent calls
to xs_recv (and xs_send). That in turn significantly
limits the number of invocations of getimeofday (or similar)
when timeouts are used and recv/send is called in a
tight loop.
The scoket implementation for inproc transfer failed to flush
identity message. The result was that the identity message
was not delivered until after the user sent the first message.
The identity message was never delivered if the user
used the socket only to receive messages.
Previously, sockets were still "valid" after being closed and only marked
as invalid when destroyed. This meant programs could access closed sockets.
Now the socket is marked "invalid" when closed.
* Implemented new ctx API (_new, _destroy, _get, _set)
* Removed 'typesafe' macros from zmq.h
* Added support for MAX_SOCKETS (was tied into change for #337)
* Created new man pages
* Added two new files: errno.hpp and errno.cpp. They are required to use errno functionality on WM.
* zmq.cpp, msg.h: removed inclusion of errno.h because it is included in zmq.h that is also included by .cpp.
* windows.hpp: process.h is included only for desktop builds.
* thread.cpp: on CE CreateThread is used instead of __beginthreadex
* socket_base.cpp, clock.cpp: on CE include cmnintrin.h instead on intrin.h
* signaler.cpp: on Windows should use special macro around event name (for unicode builds)
* err.hpp: make it include errno.hpp (my file) instead on errno.h when building for CE
* err.cpp: use FormatMessage when building for CE (because CE does not have ANSI API functions)
* zmq.h: do not include errno.h whe building for CE
* libzmq.vcproj: add tro new files
This allows us to actually report an error to the caller on resolve
failure, rather than asserting later on in the io thread.
Signed-off-by: Staffan Gimåker <staffan@spotify.com>
