Currently, http_SendMessage was not able to write to write a buffer
due to a bad use of file_buf instead of buf. This bug was introduced by
the 0197-Doxygen-reformating-compiler-warnings patch.
(cherry picked from commit 2c3bce13bd)
Currently, Upnp_Event_Subscribe always contains an empty chain in the
Sid parameter. This patch now saves the client Subscription ID in this
parameter so Control Points can see and use the same SID in the
Upnp_Event_Subscribe and in the Upnp_Event structures.
This function avoids some unecessary memory allocation.
The memory alloc'd by this function must be freed later by the caller.
(cherry picked from commit 8651174861)
Currently, in notify_send_and_recv function, pupnp waits for
HTTP_DEFAULT_TIMEOUT seconds when trying to send a GENA notification.
When there is a lot of notifications with CPs which was disconnected
without unsusbcribing, all the pupnp threads are blocked on this
timeout. To correct, this issue, this patch adds a new variable,
GENA_NOTIFICATION_SENDING_TIMEOUT, which can be used to lower the
timeout so GENA threads return quickly when writing is impossible. By
the same mean, pupnp waits the CP's answer to the NOTIFY for
HTTP_DEFAULT_TIMEOUT seconds, so this patch adds a new variable,
GENA_NOTIFICATION_ANSWERING_TIMEOUT, to customize this value.
(cherry picked from commit e6c548f57a)
Currently, pupnp is using a blocking connect to sends GENA
notifications. As a result, when there is a lot of notifications with
CPs which were disconnected without unsusbcribing, all the pupnp
threads are blocked for 20s (timeout). To correct this issue, this
patch replace the call to connect with a call to private_connect and add
a compilation flag to disable blocking TCP connections, so if we are not
able to connect to the CP, the notification is lost.
(cherry picked from commit 32cffb5bb5)
Currently, in sock_read_write function, if the timeout is 0, pupnp
realizes a "blocking" select (with an infinite timeout). With this
patch, if timeout is set to 0, pupnp will realize a "polling" select
and returns immediately if it can not read or write on the socket. This
is very useful for GENA notifications when pupnp is trying to send
events to a disconnected Control Point. "Blocking" select can now be
done by putting a negative timeout value.
SF Bug Tracker - ID: 3104527
Submitted: OBATA Akio ( obache ) - 2010-11-07 07:10:28 BRST
In threadutil/inc/ithread.h, it is expected that
PTHREAD_MUTEX_RECURSIVE is defined as macro. But on DragonFly BSD,
it is defined as enum, so not works as expected.
Attachment patch treat that DragonFly BSD always
have PTHREAD_MUTEX_RECURSIVE.
(cherry picked from commit ff006272b5)
SF Bug Tracker - ID: 3104521
Submitted: OBATA Akio ( obache ) - 2010-11-07 07:03:44 BRST
In configure.ac
AC_CHECK_FUNCS(ftime,, [AC_CHECK_LIB(compat, ftime)])
But since version 1.6.3, ftime(3) is not used, so it should be
removed, or introduce unwanted linkage with -lcompat.
(cherry picked from commit 852c301c5c)
Fix for bug introduced in samples code in svn revision 502, commit
git:25c908c558c8e60eb386c155a6b93add447ffec0
Sample device and combo were aborting with the message:
"***** SampleUtil_Initialize was called multiple times!"
(cherry picked from commit ef7edf6cf8)
Put the loop to send multiple copies of each SSDP advertisements in
ssdp_server.c instead of ssdp_device.c so we have only one call to
imillisleep ( SSDP_PAUSE ) to speed up advertisements.
(cherry picked from commit c65ec8a720)
Previously, NUM_COPY was used in ssdp_device.c to send multiple copies
of each advertisements but also multiple replies to each M-SEARCH
request. As sending multiple replies is not compliant with HTTPU/MU
spec, NUM_COPY has been set to 1 in an older patch. However, as this
variable is not needed and has been replaced with SSDP_COPY, it has
been removed.
(cherry picked from commit 2d22e997e1)
Currently, SSDP_COPY is used only to send multiple M-SEARCH requests (in
ssdp_ctrlpt.c). With this patch, SSDP_COPY is also used to send multiple
copies of each advertisements packets (in ssdp_device.c).
(cherry picked from commit 96dc968f18)
By "Carl Benson" <carl.benson@windriver.com>:
I had to do some modifications myself though, because the Android
build system insists on having a file named "util.h" taking precedence
in its include path, libupnp gets confused because of the same filename
in upnp/src/inc/util.h
(hand cherry picked from commit 8e846368e0)
Fix a bug in miniserver.c, in which maxMiniSock was wrongly declared as
unsigned int and as a result it was beeng set to ((unsigned int)(-1)).
As a result, after beeing incremented, it became zero, and this value
was beeing used in the select() call.
Thanks to Fabrice Fontaine for helping and testing with this issue.
(cherry picked from commit 2bdc9e075e)
the sleep() call, it was just a workaround.
SF Bug Tracker [ 3086852 ] 99% CPU loop in miniserver.c on a non ipv6
system.
Submitted by: Jin ( jin_eld ) - 2010-10-13 19:29:13 UTC
I cross compiled libupnp 1.6.7 for ARM9 using the --disable-ipv6
option, my system is an ipv4 only setup.
I do not know why this problem only appears when running the app in the
background (for instance using nohup &), but then it starts using 99%
CPU.
I traced the problem down to the select() call in miniserver.c in the
RunMiniServer() function. Select returns code 1, but errno is set to
"Socket operation on non-socket", I also see this when running my app
under strace.
I set all ...Sock6 variables to INVALID_SOCKET to make sure that they
do not get added to the FD_SET and the problem is gone.
(cherry picked from commit f74746ff3f)
Adding a configure flag to disable GENA notification reordering as even
with an imillisleep(1), this mechanism consumes too much CPU on embedded
devices when there is a burst of notifications.
(cherry picked from commit c73d870f46)
When a device with embedded devices (like IGD) when created and one of
the embedded devices did not have any service, there was a Segmentation
Fault (see SF Tracker [ 2688125 ]).
(cherry picked from commit ab54cb3dc5)
When a lot of notifications were generated by a device in a short
period of time then 100% of the CPU was used to reorder those
notifications by pushing back the thread in the job queue. This
mechanism has been modified so now thread sleep 1 ms before being
pushed back into the job queue.
Removing DEFAULT_SCHED_PARAM parameter and use
sched_get_priority_min(DEFAULT_POLICY) instead.
(cherry picked from commit c33b11d09f)
Devices must respond to M-SEARCH requests for any supported version and the
response should specify the same version as was contained in the search target.
Previously, the device did not answer if the M-SEARCH request did not
contain the same version number than the version number of the device.
(cherry picked from commit 4966423d96)
Add Content-Language header in the response if and only if there is an Accept-Language header in the request.
Manually ported from revision d2238615e3.
This patch adds the WEB_SERVER_CONTENT_LANGUAGE parameter so the user can specify
the language used by the device during Description and Presentation steps of UPnP
through the HTTP CONTENT-LANGUAGE header.
By default, the WEB_SERVER_CONTENT_LANGUAGE is an empty string so no
CONTENT-LANGUAGE is added.
(cherry picked from commit 2fcbe6df52)
This patch allows a user to customize the stack size of the threads used by
pupnp through the new THREAD_STACK_SIZE variable. This is especially useful
on embedded systems with limited memory where the user can set THREAD_STACK_SIZE
to ITHREAD_STACK_MIN.
However, as this modification can have side effects, I set 0 as the default
value, so threads will continue to use the default stack size of the system
(which varies greatly as stated in
https://computing.llnl.gov/tutorials/pthreads/).
(cherry picked from commit 467f9987a1)
IPv6 is currently broken in latest release of branch-1.6.x, so find
a patch attached that correct the issue (small fixes on define,
undef and retVal).
(cherry picked from commit 55d581481f)
I discovered a reliable denial-of-service issue on the last stable
release of libupnp (1.6.6) remotely triggerable by any
unauthenticated user. The issue is related with a bad parsing of
malformed XML.
(cherry picked from commit 25a4bd6d25)
Sending messages over UDP is broken in some Apple OSes
such as OS X and iOS. This might be broken in other OSes to but didn't
verify.
The fix is to modify the socket lenght argument of sendto to use the correct
sockaddr lenght dependng on whether the socket is IPV4 or IPV6.
Also added some error checks and debugging related to the issue
(cherry picked from commit 2b3ab1799b)
crash. This happens when the file being downloaded exceeds the device
memory - entirely possible when transferring video files.
The programmatic cause is that the logic implemented in the function
http_ReadHttpGet (which UpnpReadHttpGet calls) reads the entire file
into memory. The fix modifies the existing logic to discard data after
it's been read; there's no reason to keep it around since the caller
of UpnpReadHttpGet already has a copy of it.
This issue exists in 1.6.6 as well as the latest sources.
Patch submitted by Chandra (inactiveneurons).
(cherry picked from commit 4657e57766)
use connect() are broken. More specifically, connect() in these methods
is returning with an EINVAL. The programatic cause is that the address_len
argument passed to connect() is different in IPV4 vs IPV6 (as described in:
http://www.opengroup.org/onlinepubs/009695399/functions/connect.html).
The current code always uses the IPV6 size. The fix modifies each use of
connect() to use the correct size based on the address family being used.
Patch submitted by Chandra (inactiveneurons).
(cherry picked from commit 21660334e4)
at the end of the notification ("\r\n") in notify_send_and_recv() in
upnp/src/gena/gena_device.c.
Patch by Fabrice Fontaine.
(cherry picked from commit ebc941f265)
