at the end of the notification ("\r\n") in notify_send_and_recv() in
upnp/src/gena/gena_device.c.
Patch by Fabrice Fontaine.
(cherry picked from commit ebc941f265)
* InitHandleList() has never been implemented, I guess no one has ever
called it, so remove it.
* GetFreeHandle() and FreeHandle() are now static as they should.
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@567 119443c7-1b9e-41f8-b6fc-b9c35fce742c
* New internal buffer added to store global/ula IPV6 address.
* Macros to test whether an IPV6 address is global or ula.
* UpnpGetServerUlaGuaIp6Address(): added interface.
* IN6_IS_ADDR_GLOBAL, IN6_IS_ADDR_ULA: new macros.
* gIF_IPV6_ULA_GUA: new buffer.
* UpnpRegisterRootDevice3(): Change to the test of already registered
devices for IPV6.
* UpnpGetIfInfo(): gua/ula issues.
Patch submitted by Ronan Menard.
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@565 119443c7-1b9e-41f8-b6fc-b9c35fce742c
Hello,
When my patch for tracker ID 3007407 was accepted, the definition of the
serviceList string was changed from
#define SERVICELIST_STR "serviceList"
to
static const char *SERVICELIST_STR = "serviceList";
During internal code review of the final patch, it was pointed out that
sizeof(SERVICELIST_STR) == 4 since SERVICELIST_STR is now declared as
a pointer instead of an array.
If you wish to use a variable instead of a define, I suggest the
following instead:
static const char SERVICELIST_STR[] = "serviceList";
Thanks,
Chuck Thomason
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@556 119443c7-1b9e-41f8-b6fc-b9c35fce742c
Submitted: Chuck Thomason ( cyt4 ) - 2010-05-26 15:07:39 UTC
When the UPnP server is started, one alive message is broadcast for each
service in each device. It appears that libupnp's implementation of the
alive message generation does not correctly navigate the XML description
document when locating the services. This can result in the wrong UDN
being used in the alive message sent for a service.
In my specific case (see attached XML), the root EchoSTB device contains
no services, but its embedded MediaServer device contains 2 services.
When the existing libupnp code traverses the EchoSTB device in the XML,
it searches the global list of serviceLists within the document instead
of searching for a serviceList that is its direct child node. The
ContentDirectory and ConnectionManager services are then announced with
the UDN of EchoSTB1 (the root device) instead of with the UDN of
MediaServer, which is actually their parent device.
I discovered this behavior using libupnp-1.6.6. I have generated a patch
against branch-1.6.x that corrects the XML navigation such that all
services are traversed from their parent device, which results in the
correct UDN being sent in the alive message for each service. I built
from branch-1.6.x without this patch, tested, and confirmed that the
issue still exists as I observed it in libupnp-1.6.6. I then built
from branch-1.6.x with this patch, tested, and confirmed that the
issue was resolved.
Thanks,
Chuck Thomason
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@552 119443c7-1b9e-41f8-b6fc-b9c35fce742c
[svn] SF Bug Tracker [ 2995758 ] libupnp 1.6.6, wrong bind when reuseaddr is 1.
Submitted: viallard anthony ( homer242 )
When trying to use reuseaddr option in miniserver/miniserver.c, there
isn't a affectation of the port chosen (serverAddr.sin_port isn't
receive listen_port variable value).
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@549 119443c7-1b9e-41f8-b6fc-b9c35fce742c
Thanks for the load of updates, I'm still assimilating them ! Could I make
a suggestion though? The addition of printNodes(IXML_Node) to upnpdebug a
dds a new dependency on ixml.h for anything using upnpdebug.h. I'm making
quite a bit of use of upnpdebug in porting things to version 1.8.0, and I'd
prefer it if printNodes could be added to ixmldebug.h instead. I'm attach
ing a patch, what do you think ?
Nick
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@532 119443c7-1b9e-41f8-b6fc-b9c35fce742c
- int ithread_initialize_library(void);
- int ithread_cleanup_library(void);
- int ithread_initialize_thread(void);
- int ithread_cleanup_thread(void);
* SF Bug Tracker [ 2876374 ] Access Violation when compiling with Visual Studio 2008
Submitted: Stulle ( stulleamgym ) - 2009-10-10 19:05
Hi,
I am one of the devs of the MorphXT project and I use this lib in some
other of my projects, too. When I tried to upgrade the lib earlier for one
of my projects I had to realise that something did not work at first and
while most of the things were reasonably ease to be fixed. Now, the last
thing I encountered was not so easy to fix and I am uncertain if my fix is
any good so I'll just post it here and wait for some comments.
The problem was that I got an Access Violation when calling "UpnpInit". It
would call "ithread_rwlock_init(&GlobalHndRWLock, NULL)" which eventually
led to calling "pthread_cond_init" and I got the error notice at
"EnterCriticalSection (&ptw32_cond_list_lock);". It appeared that
"ptw32_cond_list_lock" was NULL. Now, I found two ways to fix this. Firstly
moving the whole block after at least one of the "ThreadPoolInit" calls
will fix the issue. Secondly, you could add:
#ifdef WIN32
#ifdef PTW32_STATIC_LIB
// to get the following working we need this... is it a good patch or
not... I do not know!
pthread_win32_process_attach_np();
#endif
#endif
right before "ithread_rwlock_init(&GlobalHndRWLock, NULL)".
Just so you know, I am using libupnp 1.6.6 and libpthreads 2.8.0 and both
are linked static into the binaries. I am currently using Visual Studio
2008 for development with Windows being the target OS. Any comment at your
end?
Regards, Stulle
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@527 119443c7-1b9e-41f8-b6fc-b9c35fce742c
SF Patch Tracker [ 2836704 ] Patch for Solaris10 compilation and usage.
Submitted By: zephyrus ( zephyrus00jp )
This second part covers the issue on linking with -lsocket -lnsl -lrt.
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@526 119443c7-1b9e-41f8-b6fc-b9c35fce742c
* SF Bug Tracker [ 2392166 ] ithread_detach not called for finished worker thread
Submitted: Ulrik ( ulsv_enea ) - 2008-12-05 08:24
Valgrind reports a memory leak due to that the function ithread_detach is
not called for finished worker threads in ThreadPool.c.
==21137== 2,176 bytes in 8 blocks are possibly lost in loss record 5 of 5
==21137== at 0x4C20F3F: calloc (vg_replace_malloc.c:279)
==21137== by 0x4010F58: _dl_allocate_tls (in /lib/ld-2.6.1.so)
==21137== by 0x544BA92: pthread_create@@GLIBC_2.2.5 (in
/lib/libpthread-2.6.1.so)
==21137== by 0x5F94592: CreateWorker (ThreadPool.c:639)
==21137== by 0x5F95079: ThreadPoolInit (ThreadPool.c:784)
I'm using libupnp 1.6.6
For more info on pthread_detach, see:
http://gelorakan.wordpress.com/2007/11/26/pthead_create-valgrind-memory-lea
k-solved/
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@521 119443c7-1b9e-41f8-b6fc-b9c35fce742c
* SF Bug Tracker [ 2392304 ] Memory leak in SSDP AdvertiseAndReply
Submitted: Ulrik ( ulsv_enea ) - 2008-12-05 08:24
Valgrind reports a memory leak function in AdvertiseAndReply
(ssdp/ssdp_server.c) in libupnp 1.6.6
There are continue statements in many places in AdvertiseAndReply. In some
of those error handling cases the variable nodelist is not free'ed before
continuing to the next iteration. The next iteration will take care of
free'ing the nodelist from the previous iteration in most cases, but not
when breaking out of the for loop after the last element.
I belive this memory leak can be solved by makeing sure that the rows
ixmlNodeList_free( nodeList );
nodeList = NULL;
are always executed, also in the beginning of the last iteration when we
found out that there are not more elements.
==29110== at 0x4C21C16: malloc (vg_replace_malloc.c:149)
==29110== by 0x5D8DE0E: ixmlNodeList_addToNodeList (nodeList.c:106)
==29110== by 0x5D8B7E2: ixmlNode_getElementsByTagNameRecursive
(node.c:1438)
==29110== by 0x5D8E587: ixmlElement_getElementsByTagName
(element.c:491)
==29110== by 0x5B6C0F1: AdvertiseAndReply (ssdp_server.c:201)
==29110== by 0x5B7AB74: UpnpSendAdvertisement (upnpapi.c:1495)
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@519 119443c7-1b9e-41f8-b6fc-b9c35fce742c
Submited by Carlo Parata from STMicroelectronics.
Hi Roberto and Nektarios,
after an analysis of the problem of libupnp with a multi-flows scenario, I
noticed that the only cause of the freezed system is the ThreadPool
management. There are not mutex problems. In practise, if all threads in the
thread pool are busy executing jobs, a new worker thread should be created if
a job is scheduled (I inspired to tombupnp library). So I solved the problem
with a little patch in threadutil library that you can find attached in this
e-mail. I hope to have helped you.
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@514 119443c7-1b9e-41f8-b6fc-b9c35fce742c
...blah... with...
Submitted: Nick Leverton ( leveret ) - 2010-03-07 05:18
Full error:
/usr/bin/install: will not overwrite just-created
`/tmp/buildd/libupnp-1.6.6/debian/tmp/usr/share/doc/libupnp3-dev/examples/s
ample_util.c' with `common/sample_util.c'
This seems to be from Automake 1.11 which doesn't like having duplicate
files in a Makefile.am. Patch attached, kindly provided by Stefan Potyra
for Debian (http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=543068)
This fix will be needed for both 1.6.x and 1.8.x branches.
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@510 119443c7-1b9e-41f8-b6fc-b9c35fce742c
SF Patch Tracker [ 2836704 ] Search for nested serviceList (not
stopping at the first lis
Submitted By: zephyrus ( zephyrus00jp )
Internet Gateway Device description contains nested serviceList (rootdevice
-> servicelist, subdevice
and subdevice has the lower-level serviceList, etc..)
Unfrotunately, the sample code sample_util.c used by tv_device sample,
etc.
has a code that looks for only the first top-level serviceList.
This results in the failure to read all the services of an IGD xml
description.
Attached patch modifies this behavior and looks for the service by
visiting all the serviceList in xml document in turn.
With the modified patch (ad additional modification), I could
simulate an IGD device and created a modified control program for that.
Patch against 1.6.6
TIA.
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@503 119443c7-1b9e-41f8-b6fc-b9c35fce742c
code list
Submitted By: Nick Leverton ( leveret )
ErrorMessage[] in upnptools.c has got a bit out of sync, the attached
patch (generated from grep 'define UPNP_E_') should bring it up to date.
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@495 119443c7-1b9e-41f8-b6fc-b9c35fce742c
(void) argument list.
Submitted By: zephyrus ( zephyrus00jp )
In a publicly installed headers, a few functions are declared without any
arguments at all, a la "()".
When I used gcc's -Wimplict and -Wstrict-prototypes to check for the
mismatch of
function prototype declarations and their usage in my own program,
some headers from libupnp-1.6.6 produced warnings.
They are not strictly bugs, but pretty much annoying. This is 2009, and
almost all the important compilers
understand ISO-C.
So the offending functions are declared as "(void") to show that they have
no arguments at all.
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@493 119443c7-1b9e-41f8-b6fc-b9c35fce742c
too-short renewal interval
Submitted By: Nick Leverton (leveret)
Auto-renewals send an invalid SID due to a missing UpnpString_get_String
call. They also send a renewal interval of 0 instead of copying it from
the original subscription.
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@492 119443c7-1b9e-41f8-b6fc-b9c35fce742c
Seems like SF's tracker won't let me add a patch to someone else's issue ?!
This refers to https://sourceforge.net/support/tracker.php?aid=2724578
The calls to inet_ntoa are in getlocalhostname(), which is called from
UpnpInit when it is returning the bound IP address.
UpnpInit/getlocalhostname hasn't been updated to IPv6, I presume this is
deliberate so that it doesn't start returning IPv6 addresses and
overwriting the caller's IPv4-sized allocation.
The attached patch just updates getlocalhostname to use inet_ntop instead
of inet_ntoa, and also documents the fact that UpnpInit is IPv4 only whilst
UpnpInnit2 is both IPv4 and IPv6.
A fuller solution might be to change UpnpInit to use some variant on
UpnpGetIfInfo. UpnpInit could still be left as IPv4 only if desired -
perhaps UpnpGetIfInfo could take an option for the desired address family.
getlocalhostname and its own copy of the interface scanning code would then
be redundant. I don't have IPv6 capability here though so I'm reluctant to
change the IPv6 code, as I have no way to test it.
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@491 119443c7-1b9e-41f8-b6fc-b9c35fce742c
add devices.
each time a device been added, UpnpInit() is called, on exit, UpnpFinish()
is called, but the memories allocated by ThreadPoolInit() may lost because
there's no code to call ThreadPoolShutdown() to release the memories. And
inet_ntoa() is not thread safe, so in my patch, I substitute inet_ntoa()
with inet_ntop().
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@489 119443c7-1b9e-41f8-b6fc-b9c35fce742c
object API
As per email to pupnp-devel, this is the patch to add the _strget_
accessors for string-like objects in the interface.
Will add a further patch shortly to udpate the sample programs.
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@488 119443c7-1b9e-41f8-b6fc-b9c35fce742c
SOAPACTION and User-Agent headers.
There is something going wrong in soap_ctrlpt.c at line 931 (based on
version 1.6.6 release).
The http_Makemessage call looks as follows:
if (http_MakeMessage(
&request, 1, 1,
"Q" "sbc" "N" "s" "s" "Ucc" "sss",
SOAPMETHOD_POST, path.buf, path.length,
"HOST: ", host.buf, host.length,
content_length,
ContentTypeHeader,
"SOAPACTION:
\"urn:schemas-upnp-org:control-1-0#QueryStateVariable\"",
xml_start, var_name, xml_end ) != 0 ) {
return UPNP_E_OUTOF_MEMORY;
}
This will result in the SOAPACTION header to be immediately followed by the
User-Agent header, while a cr-lf should separate the two. I propose to fix
this by changing the second "s" to "sc" to force the addition of a cr-lf
after the SOAPACTION. This looks consistent to the other Makemessage calls.
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@484 119443c7-1b9e-41f8-b6fc-b9c35fce742c
Submitted By: Nick Leverton - leveret
Gnu/KFreeBSD is one of the Debian architectures, it includes a FreeBSD
kernel with GNU userspace (glibc etc). The Gnu/KfreeBSD developers
provided the attached patch to test the appropriate #define and allow pupnp
to build in their environment, and asked me to forward it to you.
Since the test is a simple check for defined(__GLIBC__), this would
presumably also help with other ports of GNU libc to non-Linux kernels.
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@457 119443c7-1b9e-41f8-b6fc-b9c35fce742c
The fact that we now have an active developer on branch ipv6 made me do this before I would like to.
The idea here is to hide libupnp internal data structures from the outside world so that
developers can be free to change them without breaking the interface. There is still some work to do
before a formal release, but the samples (device and control point) should be working.
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@353 119443c7-1b9e-41f8-b6fc-b9c35fce742c
Submitted By: Thomas Norheim - kjakan_no
Device no longer segfaults with the following malformed xml action:
<u:SetColor xmlns:U="urn:schemas-upnp-org:service:tvpicture:1">
<Color>2</Color>
</u:SetColor>
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@348 119443c7-1b9e-41f8-b6fc-b9c35fce742c
upnp/sample/tvdevie and upnp/sample/tvcombo directories. The variable
port was a short int instead of an unsigned short and it was beeing
print as a negative value.
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@332 119443c7-1b9e-41f8-b6fc-b9c35fce742c
Submitted By Luke Kim - nereusuj
Version 1.6.5 cannot be compiled because of some changes in 1.6.3.
MSVC does not support stdint.h, gettimeofday(), sys/param.h, const int
variables in array size and Windows does not define _WINDOWS_ but define
_WINDOWS.
* MSVC does not understand "const int"'s as declarators of array
dimensions, we must use #define'd constants.
* Use WIN32 instead of _WINDOWS_ or _WINDOWS.
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@331 119443c7-1b9e-41f8-b6fc-b9c35fce742c
Submitted By: Hartmut Holzgraefe - hholzgra
typo in docs comment ACCAPTED instead of ACCEPTED in
@name UPNP_E_UNSUBSCRIBE_UNACCAPTED [-302]
Also, the documentation file name was mispelled and was corrected in
the Makefile.am.
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@287 119443c7-1b9e-41f8-b6fc-b9c35fce742c
Define _GNU_SOURCE if needed. The fallback behaviou will only be
implemented if _GNU_SOURCE prooves to be insufficient on some
platforms.
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@274 119443c7-1b9e-41f8-b6fc-b9c35fce742c
rwlock. HandleLock() is mapped to HandleWriteLock() while all other
instances have not been checked. One instance in AdvertiseAndReply()
has been changed to HandleReadLock(). Thanks to Alex (afaucher) for the
bug report and suggestions.
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@233 119443c7-1b9e-41f8-b6fc-b9c35fce742c
Submitted By: Luke Kim - nereusuj
Worker thread still alive after calling UpnpFinish() because
ThreadPoolShutdown() is in the #ifdef DEBUG block.
421
422 #ifdef DEBUG
423 ThreadPoolShutdown( &gSendThreadPool );
424 ThreadPoolShutdown( &gRecvThreadPool );
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@228 119443c7-1b9e-41f8-b6fc-b9c35fce742c
to (virtualDirCallback.open)(filename, UPNP_WRITE) (notice the
parenthesis) due to a change in glibc that produces compilation
errors.
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@223 119443c7-1b9e-41f8-b6fc-b9c35fce742c
SF Bug Tracker [ 1686420 ] Modifications for MacOSX.
Some of the proposed changes were already done by Rene Hexel's patch.
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@213 119443c7-1b9e-41f8-b6fc-b9c35fce742c
ax_cflags_warn_all.m4, m4/ax_cflags_warn_all_ansi.m4,
m4/type_socklen_t.m4.
* Fixed an issue with the instalation of the file upnpdebug.h. Since
the last modifications that removed the macro DEBUV_ONLY, this file
must be installed even on a non-debug build.
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@204 119443c7-1b9e-41f8-b6fc-b9c35fce742c
Submitted By: Bob Ciora
The field DestAddr of the structure Upnp_Discovery is now a full
SOCKADDRIN instead of a pointer to SOCKADDRIN. Commented code sugests
that in a previous moment, the function ssdp_handle_ctrlpt_msg() did
not use a postponed thread to call ctrlpt_callback(). Now the code
uses a thread, and most probably the original data would get lost and
the pointer would point to an invalid memory region. This fix caused
an interface change in the library and the minor library version was
bumped. Also, the libtool library numbers were changed accordingly.
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@203 119443c7-1b9e-41f8-b6fc-b9c35fce742c
defines. These were just aliases, no reason to keep them.
* Changed the comments of the include files that expose the UPnP API
to use only C89 comments and no C99 comments.
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@198 119443c7-1b9e-41f8-b6fc-b9c35fce742c
compatible with WinXP/IE control point. 'in' arguments must appear before
'out' arguments in argument list.
Thanks to Martin Tremblay for pointing out the solution originally
provided by MORIOKA Yasuhiro.
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@193 119443c7-1b9e-41f8-b6fc-b9c35fce742c
befor calling va_end().
- Removed all uses of the DBGONLY(x) macro. A static inline empty
function now is used and the compiler takes care of optimizing it out.
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@185 119443c7-1b9e-41f8-b6fc-b9c35fce742c
Thanks to David Maass.
* sizeof is unsigned, so %zu is more adequate than %zd.
* Using an invented printf directive PRIzu that on MSVC
expands to "lu", and on normal C99 compilers expands to "zu".
* Rewrote raw_find_str. Now it no longer uses strcasestr(), but it
transforms the first input buffer into lowercase.
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@184 119443c7-1b9e-41f8-b6fc-b9c35fce742c
upnp to folder upnp/sample. Moved folder upnp/sample/tvdevice/web
to folder upnp/sample/web. This way, if someone compiles the
tarball and executes upnp_tv_device from its creation directory,
there will be no error -108 for not finding directory web.
Also changed svnignore in the process.
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@183 119443c7-1b9e-41f8-b6fc-b9c35fce742c
Submitted By: Glen Masgai
after an UpnpSendActionAsync() for example, i get UPNP_E_OUTOF_MEMORY
in the callback using 1.4.4 on a x86_64 system. This happens in
http_MakeMessage(), which in some cases get called with wrong types
(int instead of size_t) in combination with format "b" and "Q".
The attached patch should fix this.
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@166 119443c7-1b9e-41f8-b6fc-b9c35fce742c
Submitted By: Timothy Redaelli - drittz
I made some patches to make it compile under FreeBSD using
gethostbyaddr_r when supported.
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@165 119443c7-1b9e-41f8-b6fc-b9c35fce742c
Submitted By: Michael Andersen - miwer
Issue was found to be related to sizeof (size_t) != sizeof (int)
on AMD64 systems. Emil Ljungdahl's AMD64 patch has been applied along
with some other fixes. Original user report follows:
When I run upnpd I get the above mentioned error (UPNP_E_OUTOF_MEMORY).
I've tried with 1.4.1 and 1.4.2-RC3, it's the same. I don't understand why,
because I have plenty of RAM, and I even tried closing some applications,
but it didn't help.
$ upnpd eth1 br0
The following is logged in the /var/log/messages:
Feb 6 01:33:47 server upnpd[6933]: Error registering the root device with
descDocUrl: http://192.168.0.1:49152/gatedesc.xml
Feb 6 01:33:47 server upnpd[6933]: UpnpRegisterRootDevice returned -104
I tried enabling debugging and it looks like it cannot allocate memory
through the membuffer_append function. It's wierd because it's only a few
bytes.
Please note, that I enabled some extra debugging lines that were commented,
in order to get more information. See attached files.
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@154 119443c7-1b9e-41f8-b6fc-b9c35fce742c
Submitted By: Jon Foster - jongfoster
This patch gives basic support for building under Cygwin - it compiles,
links, and a simple UPnP device application can initialise. I'm not sure
if it actually works yet, but this is definitely a step in the right
direction.
Patch is against the 1.4.1 release. Changes are:
* threadutil/inc/ithread.h: Fix the ithread mutex support to use
documented, portable APIs (if present) rather than the Non-Portable (_NP)
ones it uses now. This is required because Cygwin implements only the
portable API.
* threadutil/src/ThreadPool.c: Fake SetPolicyType() to do nothing on Cygwin
because otherwise it fails. Should probably investigate why it fails and
add a proper implementation later.
* upnp/src/api/upnpapi.c: On Cygwin, zero out the GlobalHndMutex structure
before initialising it. Without this, the initialisation fails. This
appears to be a bug in Cygwin.
* upnp/src/genlib/net/uri/uri.c: Use gethostbyname() on Cygwin.
git-svn-id: https://pupnp.svn.sourceforge.net/svnroot/pupnp/trunk@151 119443c7-1b9e-41f8-b6fc-b9c35fce742c
