isa-l/raid/pq_gen_sse_i32.asm
Greg Tucker 9f75defd57 Remove all slver legacy segments
The relic slver is no longer used for individual versioning
on functions and is confusing tools looking for data in text
sections. This removes all instances instead of fixing since
its usefulness is waining. Fixes #221

Change-Id: Ife0b9f105950a90337c58e8a41ac2cffc0f67d99
Signed-off-by: Greg Tucker <greg.b.tucker@intel.com>
2022-07-14 19:23:52 -07:00

262 lines
7.1 KiB
NASM

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Copyright(c) 2011-2015 Intel Corporation All rights reserved.
;
; Redistribution and use in source and binary forms, with or without
; modification, are permitted provided that the following conditions
; are met:
; * Redistributions of source code must retain the above copyright
; notice, this list of conditions and the following disclaimer.
; * Redistributions in binary form must reproduce the above copyright
; notice, this list of conditions and the following disclaimer in
; the documentation and/or other materials provided with the
; distribution.
; * Neither the name of Intel Corporation nor the names of its
; contributors may be used to endorse or promote products derived
; from this software without specific prior written permission.
;
; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
; "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
; LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
; A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
; OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
; SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
; LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
; DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
; THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;; Optimized pq of N source vectors using SSE3
;;; int pq_gen_sse(int vects, int len, void **array)
;;; Generates P+Q parity vector from N (vects-2) sources in array of pointers
;;; (**array). Last two pointers are the P and Q destinations respectively.
;;; Vectors must be aligned to 16 bytes. Length must be 16 byte aligned.
%include "reg_sizes.asm"
%ifidn __OUTPUT_FORMAT__, elf64
%define arg0 rdi
%define arg1 rsi
%define arg2 rdx
%define arg3 rcx
%define arg4 r8
%define arg5 r9
%define tmp r11
%define return rax
%define PS 8
%define func(x) x: endbranch
%define FUNC_SAVE
%define FUNC_RESTORE
%elifidn __OUTPUT_FORMAT__, win64
%define arg0 rcx
%define arg1 rdx
%define arg2 r8
%define arg3 r9
%define return rax
%define PS 8
%define tmp r10
%define stack_size 2*16 + 8 ; must be an odd multiple of 8
%define func(x) proc_frame x
%macro FUNC_SAVE 0
alloc_stack stack_size
save_xmm128 xmm6, 0*16
save_xmm128 xmm7, 1*16
end_prolog
%endmacro
%macro FUNC_RESTORE 0
movdqa xmm6, [rsp + 0*16]
movdqa xmm7, [rsp + 1*16]
add rsp, stack_size
%endmacro
%elifidn __OUTPUT_FORMAT__, elf32
%define arg0 edx
%define arg1 ecx
%define return eax
%define PS 4
%define func(x) x: endbranch
%define arg(x) [ebp+8+PS*x]
%define arg2 edi ; must sav/restore
%define arg3 esi
%define tmp ebx
%macro FUNC_SAVE 0
push ebp
mov ebp, esp
push esi
push edi
push ebx
mov arg0, arg(0)
mov arg1, arg(1)
mov arg2, arg(2)
%endmacro
%macro FUNC_RESTORE 0
pop ebx
pop edi
pop esi
mov esp, ebp ;if has frame pointer?
pop ebp
%endmacro
%endif ; output formats
%define vec arg0
%define len arg1
%define ptr arg3
%define pos return
%define xp1 xmm0
%define xq1 xmm1
%define xtmp1 xmm2
%define xs1 xmm3
%define xp2 xmm4
%define xq2 xmm5
%define xtmp2 xmm6
%define xs2 xmm7
%ifidn PS,8 ; 64-bit code
default rel
[bits 64]
%define xpoly xmm15
%elifidn PS,4 ; 32-bit code
%define xpoly [poly]
%endif
;;; Use Non-temporal load/stor
%ifdef NO_NT_LDST
%define XLDR movdqa
%define XSTR movdqa
%else
%define XLDR movntdqa
%define XSTR movntdq
%endif
section .text
align 16
mk_global pq_gen_sse, function
func(pq_gen_sse)
FUNC_SAVE
sub vec, 3 ;Keep as offset to last source
jng return_fail ;Must have at least 2 sources
cmp len, 0
je return_pass
test len, (16-1) ;Check alignment of length
jnz return_fail
mov pos, 0
%ifidn PS,8
movdqa xpoly, [poly] ;For 64-bit, load poly into high xmm reg
%endif
cmp len, 32
jl loop16
len_aligned_32bytes:
sub len, 32 ;Do end of vec first and run backward
loop32:
mov ptr, [arg2+vec*PS] ;Fetch last source pointer
mov tmp, vec ;Set tmp to point back to last vector
XLDR xs1, [ptr+pos] ;Preload last vector (source)
XLDR xs2, [ptr+pos+16] ;Preload last vector (source)
pxor xp1, xp1 ;p1 = 0
pxor xq1, xq1 ;q1 = 0
pxor xp2, xp2 ;p2 = 0
pxor xq2, xq2 ;q2 = 0
next_vect:
sub tmp, 1 ;Inner loop for each source vector
mov ptr, [arg2+tmp*PS] ; get pointer to next vect
pxor xq1, xs1 ; q1 ^= s1
pxor xq2, xs2 ; q2 ^= s2
pxor xp1, xs1 ; p1 ^= s1
pxor xp2, xs2 ; p2 ^= s2
pxor xtmp1, xtmp1 ; xtmp1 = 0 - for compare to 0
pxor xtmp2, xtmp2 ; xtmp2 = 0
pcmpgtb xtmp1, xq1 ; xtmp1 = mask 0xff or 0x00 if bit7 set
pcmpgtb xtmp2, xq2 ; xtmp2 = mask 0xff or 0x00 if bit7 set
pand xtmp1, xpoly ; xtmp1 = poly or 0x00
pand xtmp2, xpoly ; xtmp2 = poly or 0x00
XLDR xs1, [ptr+pos] ; Get next vector (source data1)
XLDR xs2, [ptr+pos+16] ; Get next vector (source data2)
paddb xq1, xq1 ; q1 = q1<<1
paddb xq2, xq2 ; q2 = q2<<1
pxor xq1, xtmp1 ; q1 = q1<<1 ^ poly_masked
pxor xq2, xtmp2 ; q2 = q2<<1 ^ poly_masked
jg next_vect ; Loop for each vect except 0
mov ptr, [arg2+PS+vec*PS] ;Get address of P parity vector
mov tmp, [arg2+(2*PS)+vec*PS] ;Get address of Q parity vector
pxor xp1, xs1 ;p1 ^= s1[0] - last source is already loaded
pxor xq1, xs1 ;q1 ^= 1 * s1[0]
pxor xp2, xs2 ;p2 ^= s2[0]
pxor xq2, xs2 ;q2 ^= 1 * s2[0]
XSTR [ptr+pos], xp1 ;Write parity P1 vector
XSTR [ptr+pos+16], xp2 ;Write parity P2 vector
XSTR [tmp+pos], xq1 ;Write parity Q1 vector
XSTR [tmp+pos+16], xq2 ;Write parity Q2 vector
add pos, 32
cmp pos, len
jle loop32
;; ------------------------------
;; Do last 16 Bytes remaining
add len, 32
cmp pos, len
je return_pass
loop16:
mov ptr, [arg2+vec*PS] ;Fetch last source pointer
mov tmp, vec ;Set tmp to point back to last vector
XLDR xs1, [ptr+pos] ;Preload last vector (source)
pxor xp1, xp1 ;p = 0
pxor xq1, xq1 ;q = 0
next_vect16:
sub tmp, 1 ;Inner loop for each source vector
mov ptr, [arg2+tmp*PS] ; get pointer to next vect
pxor xq1, xs1 ; q1 ^= s1
pxor xtmp1, xtmp1 ; xtmp = 0
pcmpgtb xtmp1, xq1 ; xtmp = mask 0xff or 0x00 if bit7 set
pand xtmp1, xpoly ; xtmp = poly or 0x00
pxor xp1, xs1 ; p ^= s
paddb xq1, xq1 ; q = q<<1
pxor xq1, xtmp1 ; q = q<<1 ^ poly_masked
XLDR xs1, [ptr+pos] ; Get next vector (source data)
jg next_vect16 ; Loop for each vect except 0
mov ptr, [arg2+PS+vec*PS] ;Get address of P parity vector
mov tmp, [arg2+(2*PS)+vec*PS] ;Get address of Q parity vector
pxor xp1, xs1 ;p ^= s[0] - last source is already loaded
pxor xq1, xs1 ;q ^= 1 * s[0]
XSTR [ptr+pos], xp1 ;Write parity P vector
XSTR [tmp+pos], xq1 ;Write parity Q vector
add pos, 16
cmp pos, len
jl loop16
return_pass:
mov return, 0
FUNC_RESTORE
ret
return_fail:
mov return, 1
FUNC_RESTORE
ret
endproc_frame
section .data
align 16
poly:
dq 0x1d1d1d1d1d1d1d1d, 0x1d1d1d1d1d1d1d1d