isa-l/crc/crc32_ieee_02.asm
H.J. Lu cd888f01a4 x86: Add ENDBR32/ENDBR64 at function entries for Intel CET
To support Intel CET, all indirect branch targets must start with
ENDBR32/ENDBR64.  Here is a patch to define endbranch and add it to
function entries in x86 assembly codes which are indirect branch
targets as discovered by running testsuite on Intel CET machine and
visual inspection.

Verified with

$ CC="gcc -Wl,-z,cet-report=error -fcf-protection" CXX="g++ -Wl,-z,cet-report=error -fcf-protection" .../configure x86_64-linux
$ make -j8
$ make -j8 check

with both nasm and yasm on both CET and non-CET machines.

Change-Id: I9822578e7294fb5043a64ab7de5c41de81a7d337
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
2020-05-26 09:16:49 -07:00

653 lines
16 KiB
NASM

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Copyright(c) 2011-2020 Intel Corporation All rights reserved.
;
; Redistribution and use in source and binary forms, with or without
; modification, are permitted provided that the following conditions
; are met:
; * Redistributions of source code must retain the above copyright
; notice, this list of conditions and the following disclaimer.
; * Redistributions in binary form must reproduce the above copyright
; notice, this list of conditions and the following disclaimer in
; the documentation and/or other materials provided with the
; distribution.
; * Neither the name of Intel Corporation nor the names of its
; contributors may be used to endorse or promote products derived
; from this software without specific prior written permission.
;
; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
; "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
; LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
; A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
; OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
; SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
; LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
; DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
; THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Function API:
; UINT32 crc32_ieee_02(
; UINT32 init_crc, //initial CRC value, 32 bits
; const unsigned char *buf, //buffer pointer to calculate CRC on
; UINT64 len //buffer length in bytes (64-bit data)
; );
;
; Authors:
; Erdinc Ozturk
; Vinodh Gopal
; James Guilford
;
; Reference paper titled "Fast CRC Computation for Generic Polynomials Using PCLMULQDQ Instruction"
; URL: http://www.intel.com/content/dam/www/public/us/en/documents/white-papers/fast-crc-computation-generic-polynomials-pclmulqdq-paper.pdf
%include "reg_sizes.asm"
%define fetch_dist 1024
[bits 64]
default rel
section .text
%ifidn __OUTPUT_FORMAT__, win64
%xdefine arg1 rcx
%xdefine arg2 rdx
%xdefine arg3 r8
%xdefine arg1_low32 ecx
%else
%xdefine arg1 rdi
%xdefine arg2 rsi
%xdefine arg3 rdx
%xdefine arg1_low32 edi
%endif
%define TMP 16*0
%ifidn __OUTPUT_FORMAT__, win64
%define XMM_SAVE 16*2
%define VARIABLE_OFFSET 16*10+8
%else
%define VARIABLE_OFFSET 16*2+8
%endif
align 16
mk_global crc32_ieee_02, function
crc32_ieee_02:
endbranch
not arg1_low32 ;~init_crc
sub rsp,VARIABLE_OFFSET
%ifidn __OUTPUT_FORMAT__, win64
; push the xmm registers into the stack to maintain
vmovdqa [rsp + XMM_SAVE + 16*0], xmm6
vmovdqa [rsp + XMM_SAVE + 16*1], xmm7
vmovdqa [rsp + XMM_SAVE + 16*2], xmm8
vmovdqa [rsp + XMM_SAVE + 16*3], xmm9
vmovdqa [rsp + XMM_SAVE + 16*4], xmm10
vmovdqa [rsp + XMM_SAVE + 16*5], xmm11
vmovdqa [rsp + XMM_SAVE + 16*6], xmm12
vmovdqa [rsp + XMM_SAVE + 16*7], xmm13
%endif
; check if smaller than 256
cmp arg3, 256
; for sizes less than 256, we can't fold 128B at a time...
jl _less_than_256
; load the initial crc value
vmovd xmm10, arg1_low32 ; initial crc
; crc value does not need to be byte-reflected, but it needs to be moved to the high part of the register.
; because data will be byte-reflected and will align with initial crc at correct place.
vpslldq xmm10, 12
vmovdqa xmm11, [SHUF_MASK]
; receive the initial 128B data, xor the initial crc value
vmovdqu xmm0, [arg2+16*0]
vmovdqu xmm1, [arg2+16*1]
vmovdqu xmm2, [arg2+16*2]
vmovdqu xmm3, [arg2+16*3]
vmovdqu xmm4, [arg2+16*4]
vmovdqu xmm5, [arg2+16*5]
vmovdqu xmm6, [arg2+16*6]
vmovdqu xmm7, [arg2+16*7]
vpshufb xmm0, xmm11
; XOR the initial_crc value
vpxor xmm0, xmm10
vpshufb xmm1, xmm11
vpshufb xmm2, xmm11
vpshufb xmm3, xmm11
vpshufb xmm4, xmm11
vpshufb xmm5, xmm11
vpshufb xmm6, xmm11
vpshufb xmm7, xmm11
vmovdqa xmm10, [rk3] ;xmm10 has rk3 and rk4
;imm value of pclmulqdq instruction will determine which constant to use
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; we subtract 256 instead of 128 to save one instruction from the loop
sub arg3, 256
; at this section of the code, there is 128*x+y (0<=y<128) bytes of buffer. The _fold_128_B_loop
; loop will fold 128B at a time until we have 128+y Bytes of buffer
; fold 128B at a time. This section of the code folds 8 xmm registers in parallel
_fold_128_B_loop:
; update the buffer pointer
add arg2, 128 ; buf += 128;
prefetchnta [arg2+fetch_dist+0]
vmovdqu xmm9, [arg2+16*0]
vmovdqu xmm12, [arg2+16*1]
vpshufb xmm9, xmm11
vpshufb xmm12, xmm11
vmovdqa xmm8, xmm0
vmovdqa xmm13, xmm1
vpclmulqdq xmm0, xmm10, 0x0
vpclmulqdq xmm8, xmm10 , 0x11
vpclmulqdq xmm1, xmm10, 0x0
vpclmulqdq xmm13, xmm10 , 0x11
vpxor xmm0, xmm9
vxorps xmm0, xmm8
vpxor xmm1, xmm12
vxorps xmm1, xmm13
prefetchnta [arg2+fetch_dist+32]
vmovdqu xmm9, [arg2+16*2]
vmovdqu xmm12, [arg2+16*3]
vpshufb xmm9, xmm11
vpshufb xmm12, xmm11
vmovdqa xmm8, xmm2
vmovdqa xmm13, xmm3
vpclmulqdq xmm2, xmm10, 0x0
vpclmulqdq xmm8, xmm10 , 0x11
vpclmulqdq xmm3, xmm10, 0x0
vpclmulqdq xmm13, xmm10 , 0x11
vpxor xmm2, xmm9
vxorps xmm2, xmm8
vpxor xmm3, xmm12
vxorps xmm3, xmm13
prefetchnta [arg2+fetch_dist+64]
vmovdqu xmm9, [arg2+16*4]
vmovdqu xmm12, [arg2+16*5]
vpshufb xmm9, xmm11
vpshufb xmm12, xmm11
vmovdqa xmm8, xmm4
vmovdqa xmm13, xmm5
vpclmulqdq xmm4, xmm10, 0x0
vpclmulqdq xmm8, xmm10 , 0x11
vpclmulqdq xmm5, xmm10, 0x0
vpclmulqdq xmm13, xmm10 , 0x11
vpxor xmm4, xmm9
vxorps xmm4, xmm8
vpxor xmm5, xmm12
vxorps xmm5, xmm13
prefetchnta [arg2+fetch_dist+96]
vmovdqu xmm9, [arg2+16*6]
vmovdqu xmm12, [arg2+16*7]
vpshufb xmm9, xmm11
vpshufb xmm12, xmm11
vmovdqa xmm8, xmm6
vmovdqa xmm13, xmm7
vpclmulqdq xmm6, xmm10, 0x0
vpclmulqdq xmm8, xmm10 , 0x11
vpclmulqdq xmm7, xmm10, 0x0
vpclmulqdq xmm13, xmm10 , 0x11
vpxor xmm6, xmm9
vxorps xmm6, xmm8
vpxor xmm7, xmm12
vxorps xmm7, xmm13
sub arg3, 128
; check if there is another 128B in the buffer to be able to fold
jge _fold_128_B_loop
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
add arg2, 128
; at this point, the buffer pointer is pointing at the last y Bytes of the buffer
; the 128 of folded data is in 4 of the xmm registers: xmm0, xmm1, xmm2, xmm3
; fold the 8 xmm registers to 1 xmm register with different constants
vmovdqa xmm10, [rk9]
vmovdqa xmm8, xmm0
vpclmulqdq xmm0, xmm10, 0x11
vpclmulqdq xmm8, xmm10, 0x0
vpxor xmm7, xmm8
vxorps xmm7, xmm0
vmovdqa xmm10, [rk11]
vmovdqa xmm8, xmm1
vpclmulqdq xmm1, xmm10, 0x11
vpclmulqdq xmm8, xmm10, 0x0
vpxor xmm7, xmm8
vxorps xmm7, xmm1
vmovdqa xmm10, [rk13]
vmovdqa xmm8, xmm2
vpclmulqdq xmm2, xmm10, 0x11
vpclmulqdq xmm8, xmm10, 0x0
vpxor xmm7, xmm8
vpxor xmm7, xmm2
vmovdqa xmm10, [rk15]
vmovdqa xmm8, xmm3
vpclmulqdq xmm3, xmm10, 0x11
vpclmulqdq xmm8, xmm10, 0x0
vpxor xmm7, xmm8
vxorps xmm7, xmm3
vmovdqa xmm10, [rk17]
vmovdqa xmm8, xmm4
vpclmulqdq xmm4, xmm10, 0x11
vpclmulqdq xmm8, xmm10, 0x0
vpxor xmm7, xmm8
vpxor xmm7, xmm4
vmovdqa xmm10, [rk19]
vmovdqa xmm8, xmm5
vpclmulqdq xmm5, xmm10, 0x11
vpclmulqdq xmm8, xmm10, 0x0
vpxor xmm7, xmm8
vxorps xmm7, xmm5
vmovdqa xmm10, [rk1] ;xmm10 has rk1 and rk2
;imm value of pclmulqdq instruction will determine which constant to use
vmovdqa xmm8, xmm6
vpclmulqdq xmm6, xmm10, 0x11
vpclmulqdq xmm8, xmm10, 0x0
vpxor xmm7, xmm8
vpxor xmm7, xmm6
; instead of 128, we add 112 to the loop counter to save 1 instruction from the loop
; instead of a cmp instruction, we use the negative flag with the jl instruction
add arg3, 128-16
jl _final_reduction_for_128
; now we have 16+y bytes left to reduce. 16 Bytes is in register xmm7 and the rest is in memory
; we can fold 16 bytes at a time if y>=16
; continue folding 16B at a time
_16B_reduction_loop:
vmovdqa xmm8, xmm7
vpclmulqdq xmm7, xmm10, 0x11
vpclmulqdq xmm8, xmm10, 0x0
vpxor xmm7, xmm8
vmovdqu xmm0, [arg2]
vpshufb xmm0, xmm11
vpxor xmm7, xmm0
add arg2, 16
sub arg3, 16
; instead of a cmp instruction, we utilize the flags with the jge instruction
; equivalent of: cmp arg3, 16-16
; check if there is any more 16B in the buffer to be able to fold
jge _16B_reduction_loop
;now we have 16+z bytes left to reduce, where 0<= z < 16.
;first, we reduce the data in the xmm7 register
_final_reduction_for_128:
; check if any more data to fold. If not, compute the CRC of the final 128 bits
add arg3, 16
je _128_done
; here we are getting data that is less than 16 bytes.
; since we know that there was data before the pointer, we can offset the input pointer before the actual point, to receive exactly 16 bytes.
; after that the registers need to be adjusted.
_get_last_two_xmms:
vmovdqa xmm2, xmm7
vmovdqu xmm1, [arg2 - 16 + arg3]
vpshufb xmm1, xmm11
; get rid of the extra data that was loaded before
; load the shift constant
lea rax, [pshufb_shf_table + 16]
sub rax, arg3
vmovdqu xmm0, [rax]
; shift xmm2 to the left by arg3 bytes
vpshufb xmm2, xmm0
; shift xmm7 to the right by 16-arg3 bytes
vpxor xmm0, [mask1]
vpshufb xmm7, xmm0
vpblendvb xmm1, xmm1, xmm2, xmm0
; fold 16 Bytes
vmovdqa xmm2, xmm1
vmovdqa xmm8, xmm7
vpclmulqdq xmm7, xmm10, 0x11
vpclmulqdq xmm8, xmm10, 0x0
vpxor xmm7, xmm8
vpxor xmm7, xmm2
_128_done:
; compute crc of a 128-bit value
vmovdqa xmm10, [rk5] ; rk5 and rk6 in xmm10
vmovdqa xmm0, xmm7
;64b fold
vpclmulqdq xmm7, xmm10, 0x1
vpslldq xmm0, 8
vpxor xmm7, xmm0
;32b fold
vmovdqa xmm0, xmm7
vpand xmm0, [mask2]
vpsrldq xmm7, 12
vpclmulqdq xmm7, xmm10, 0x10
vpxor xmm7, xmm0
;barrett reduction
_barrett:
vmovdqa xmm10, [rk7] ; rk7 and rk8 in xmm10
vmovdqa xmm0, xmm7
vpclmulqdq xmm7, xmm10, 0x01
vpslldq xmm7, 4
vpclmulqdq xmm7, xmm10, 0x11
vpslldq xmm7, 4
vpxor xmm7, xmm0
vpextrd eax, xmm7,1
_cleanup:
not eax
%ifidn __OUTPUT_FORMAT__, win64
vmovdqa xmm6, [rsp + XMM_SAVE + 16*0]
vmovdqa xmm7, [rsp + XMM_SAVE + 16*1]
vmovdqa xmm8, [rsp + XMM_SAVE + 16*2]
vmovdqa xmm9, [rsp + XMM_SAVE + 16*3]
vmovdqa xmm10, [rsp + XMM_SAVE + 16*4]
vmovdqa xmm11, [rsp + XMM_SAVE + 16*5]
vmovdqa xmm12, [rsp + XMM_SAVE + 16*6]
vmovdqa xmm13, [rsp + XMM_SAVE + 16*7]
%endif
add rsp,VARIABLE_OFFSET
ret
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
align 16
_less_than_256:
; check if there is enough buffer to be able to fold 16B at a time
cmp arg3, 32
jl _less_than_32
vmovdqa xmm11, [SHUF_MASK]
; if there is, load the constants
vmovdqa xmm10, [rk1] ; rk1 and rk2 in xmm10
vmovd xmm0, arg1_low32 ; get the initial crc value
vpslldq xmm0, 12 ; align it to its correct place
vmovdqu xmm7, [arg2] ; load the plaintext
vpshufb xmm7, xmm11 ; byte-reflect the plaintext
vpxor xmm7, xmm0
; update the buffer pointer
add arg2, 16
; update the counter. subtract 32 instead of 16 to save one instruction from the loop
sub arg3, 32
jmp _16B_reduction_loop
align 16
_less_than_32:
; mov initial crc to the return value. this is necessary for zero-length buffers.
mov eax, arg1_low32
test arg3, arg3
je _cleanup
vmovdqa xmm11, [SHUF_MASK]
vmovd xmm0, arg1_low32 ; get the initial crc value
vpslldq xmm0, 12 ; align it to its correct place
cmp arg3, 16
je _exact_16_left
jl _less_than_16_left
vmovdqu xmm7, [arg2] ; load the plaintext
vpshufb xmm7, xmm11 ; byte-reflect the plaintext
vpxor xmm7, xmm0 ; xor the initial crc value
add arg2, 16
sub arg3, 16
vmovdqa xmm10, [rk1] ; rk1 and rk2 in xmm10
jmp _get_last_two_xmms
align 16
_less_than_16_left:
; use stack space to load data less than 16 bytes, zero-out the 16B in memory first.
vpxor xmm1, xmm1
mov r11, rsp
vmovdqa [r11], xmm1
cmp arg3, 4
jl _only_less_than_4
; backup the counter value
mov r9, arg3
cmp arg3, 8
jl _less_than_8_left
; load 8 Bytes
mov rax, [arg2]
mov [r11], rax
add r11, 8
sub arg3, 8
add arg2, 8
_less_than_8_left:
cmp arg3, 4
jl _less_than_4_left
; load 4 Bytes
mov eax, [arg2]
mov [r11], eax
add r11, 4
sub arg3, 4
add arg2, 4
_less_than_4_left:
cmp arg3, 2
jl _less_than_2_left
; load 2 Bytes
mov ax, [arg2]
mov [r11], ax
add r11, 2
sub arg3, 2
add arg2, 2
_less_than_2_left:
cmp arg3, 1
jl _zero_left
; load 1 Byte
mov al, [arg2]
mov [r11], al
_zero_left:
vmovdqa xmm7, [rsp]
vpshufb xmm7, xmm11
vpxor xmm7, xmm0 ; xor the initial crc value
; shl r9, 4
lea rax, [pshufb_shf_table + 16]
sub rax, r9
vmovdqu xmm0, [rax]
vpxor xmm0, [mask1]
vpshufb xmm7, xmm0
jmp _128_done
align 16
_exact_16_left:
vmovdqu xmm7, [arg2]
vpshufb xmm7, xmm11
vpxor xmm7, xmm0 ; xor the initial crc value
jmp _128_done
_only_less_than_4:
cmp arg3, 3
jl _only_less_than_3
; load 3 Bytes
mov al, [arg2]
mov [r11], al
mov al, [arg2+1]
mov [r11+1], al
mov al, [arg2+2]
mov [r11+2], al
vmovdqa xmm7, [rsp]
vpshufb xmm7, xmm11
vpxor xmm7, xmm0 ; xor the initial crc value
vpsrldq xmm7, 5
jmp _barrett
_only_less_than_3:
cmp arg3, 2
jl _only_less_than_2
; load 2 Bytes
mov al, [arg2]
mov [r11], al
mov al, [arg2+1]
mov [r11+1], al
vmovdqa xmm7, [rsp]
vpshufb xmm7, xmm11
vpxor xmm7, xmm0 ; xor the initial crc value
vpsrldq xmm7, 6
jmp _barrett
_only_less_than_2:
; load 1 Byte
mov al, [arg2]
mov [r11], al
vmovdqa xmm7, [rsp]
vpshufb xmm7, xmm11
vpxor xmm7, xmm0 ; xor the initial crc value
vpsrldq xmm7, 7
jmp _barrett
section .data
; precomputed constants
align 16
rk1 :
DQ 0xf200aa6600000000
rk2 :
DQ 0x17d3315d00000000
rk3 :
DQ 0x022ffca500000000
rk4 :
DQ 0x9d9ee22f00000000
rk5 :
DQ 0xf200aa6600000000
rk6 :
DQ 0x490d678d00000000
rk7 :
DQ 0x0000000104d101df
rk8 :
DQ 0x0000000104c11db7
rk9 :
DQ 0x6ac7e7d700000000
rk10 :
DQ 0xfcd922af00000000
rk11 :
DQ 0x34e45a6300000000
rk12 :
DQ 0x8762c1f600000000
rk13 :
DQ 0x5395a0ea00000000
rk14 :
DQ 0x54f2d5c700000000
rk15 :
DQ 0xd3504ec700000000
rk16 :
DQ 0x57a8445500000000
rk17 :
DQ 0xc053585d00000000
rk18 :
DQ 0x766f1b7800000000
rk19 :
DQ 0xcd8c54b500000000
rk20 :
DQ 0xab40b71e00000000
mask1:
dq 0x8080808080808080, 0x8080808080808080
mask2:
dq 0xFFFFFFFFFFFFFFFF, 0x00000000FFFFFFFF
SHUF_MASK:
dq 0x08090A0B0C0D0E0F, 0x0001020304050607
pshufb_shf_table:
; use these values for shift constants for the pshufb instruction
; different alignments result in values as shown:
; dq 0x8887868584838281, 0x008f8e8d8c8b8a89 ; shl 15 (16-1) / shr1
; dq 0x8988878685848382, 0x01008f8e8d8c8b8a ; shl 14 (16-3) / shr2
; dq 0x8a89888786858483, 0x0201008f8e8d8c8b ; shl 13 (16-4) / shr3
; dq 0x8b8a898887868584, 0x030201008f8e8d8c ; shl 12 (16-4) / shr4
; dq 0x8c8b8a8988878685, 0x04030201008f8e8d ; shl 11 (16-5) / shr5
; dq 0x8d8c8b8a89888786, 0x0504030201008f8e ; shl 10 (16-6) / shr6
; dq 0x8e8d8c8b8a898887, 0x060504030201008f ; shl 9 (16-7) / shr7
; dq 0x8f8e8d8c8b8a8988, 0x0706050403020100 ; shl 8 (16-8) / shr8
; dq 0x008f8e8d8c8b8a89, 0x0807060504030201 ; shl 7 (16-9) / shr9
; dq 0x01008f8e8d8c8b8a, 0x0908070605040302 ; shl 6 (16-10) / shr10
; dq 0x0201008f8e8d8c8b, 0x0a09080706050403 ; shl 5 (16-11) / shr11
; dq 0x030201008f8e8d8c, 0x0b0a090807060504 ; shl 4 (16-12) / shr12
; dq 0x04030201008f8e8d, 0x0c0b0a0908070605 ; shl 3 (16-13) / shr13
; dq 0x0504030201008f8e, 0x0d0c0b0a09080706 ; shl 2 (16-14) / shr14
; dq 0x060504030201008f, 0x0e0d0c0b0a090807 ; shl 1 (16-15) / shr15
dq 0x8786858483828100, 0x8f8e8d8c8b8a8988
dq 0x0706050403020100, 0x000e0d0c0b0a0908