isa-l/raid/pq_gen_sse_i32.asm
Greg Tucker 2e212f28fa build: Fix for mac nasm lack of symbol types
Change-Id: I9ee86a3e32876d3860477c8365fc459d94a8920e
Signed-off-by: Greg Tucker <greg.b.tucker@intel.com>
2018-11-29 13:54:36 -07:00

265 lines
7.2 KiB
NASM

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Copyright(c) 2011-2015 Intel Corporation All rights reserved.
;
; Redistribution and use in source and binary forms, with or without
; modification, are permitted provided that the following conditions
; are met:
; * Redistributions of source code must retain the above copyright
; notice, this list of conditions and the following disclaimer.
; * Redistributions in binary form must reproduce the above copyright
; notice, this list of conditions and the following disclaimer in
; the documentation and/or other materials provided with the
; distribution.
; * Neither the name of Intel Corporation nor the names of its
; contributors may be used to endorse or promote products derived
; from this software without specific prior written permission.
;
; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
; "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
; LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
; A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
; OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
; SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
; LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
; DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
; THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;; Optimized pq of N source vectors using SSE3
;;; int pq_gen_sse(int vects, int len, void **array)
;;; Generates P+Q parity vector from N (vects-2) sources in array of pointers
;;; (**array). Last two pointers are the P and Q destinations respectively.
;;; Vectors must be aligned to 16 bytes. Length must be 16 byte aligned.
%include "reg_sizes.asm"
%ifidn __OUTPUT_FORMAT__, elf64
%define arg0 rdi
%define arg1 rsi
%define arg2 rdx
%define arg3 rcx
%define arg4 r8
%define arg5 r9
%define tmp r11
%define return rax
%define PS 8
%define func(x) x:
%define FUNC_SAVE
%define FUNC_RESTORE
%elifidn __OUTPUT_FORMAT__, win64
%define arg0 rcx
%define arg1 rdx
%define arg2 r8
%define arg3 r9
%define return rax
%define PS 8
%define tmp r10
%define stack_size 2*16 + 8 ; must be an odd multiple of 8
%define func(x) proc_frame x
%macro FUNC_SAVE 0
alloc_stack stack_size
save_xmm128 xmm6, 0*16
save_xmm128 xmm7, 1*16
end_prolog
%endmacro
%macro FUNC_RESTORE 0
movdqa xmm6, [rsp + 0*16]
movdqa xmm7, [rsp + 1*16]
add rsp, stack_size
%endmacro
%elifidn __OUTPUT_FORMAT__, elf32
%define arg0 edx
%define arg1 ecx
%define return eax
%define PS 4
%define func(x) x:
%define arg(x) [ebp+8+PS*x]
%define arg2 edi ; must sav/restore
%define arg3 esi
%define tmp ebx
%macro FUNC_SAVE 0
push ebp
mov ebp, esp
push esi
push edi
push ebx
mov arg0, arg(0)
mov arg1, arg(1)
mov arg2, arg(2)
%endmacro
%macro FUNC_RESTORE 0
pop ebx
pop edi
pop esi
mov esp, ebp ;if has frame pointer?
pop ebp
%endmacro
%endif ; output formats
%define vec arg0
%define len arg1
%define ptr arg3
%define pos return
%define xp1 xmm0
%define xq1 xmm1
%define xtmp1 xmm2
%define xs1 xmm3
%define xp2 xmm4
%define xq2 xmm5
%define xtmp2 xmm6
%define xs2 xmm7
%ifidn PS,8 ; 64-bit code
default rel
[bits 64]
%define xpoly xmm15
%elifidn PS,4 ; 32-bit code
%define xpoly [poly]
%endif
;;; Use Non-temporal load/stor
%ifdef NO_NT_LDST
%define XLDR movdqa
%define XSTR movdqa
%else
%define XLDR movntdqa
%define XSTR movntdq
%endif
section .text
align 16
global pq_gen_sse:ISAL_SYM_TYPE_FUNCTION
func(pq_gen_sse)
FUNC_SAVE
sub vec, 3 ;Keep as offset to last source
jng return_fail ;Must have at least 2 sources
cmp len, 0
je return_pass
test len, (16-1) ;Check alignment of length
jnz return_fail
mov pos, 0
%ifidn PS,8
movdqa xpoly, [poly] ;For 64-bit, load poly into high xmm reg
%endif
cmp len, 32
jl loop16
len_aligned_32bytes:
sub len, 32 ;Do end of vec first and run backward
loop32:
mov ptr, [arg2+vec*PS] ;Fetch last source pointer
mov tmp, vec ;Set tmp to point back to last vector
XLDR xs1, [ptr+pos] ;Preload last vector (source)
XLDR xs2, [ptr+pos+16] ;Preload last vector (source)
pxor xp1, xp1 ;p1 = 0
pxor xq1, xq1 ;q1 = 0
pxor xp2, xp2 ;p2 = 0
pxor xq2, xq2 ;q2 = 0
next_vect:
sub tmp, 1 ;Inner loop for each source vector
mov ptr, [arg2+tmp*PS] ; get pointer to next vect
pxor xq1, xs1 ; q1 ^= s1
pxor xq2, xs2 ; q2 ^= s2
pxor xp1, xs1 ; p1 ^= s1
pxor xp2, xs2 ; p2 ^= s2
pxor xtmp1, xtmp1 ; xtmp1 = 0 - for compare to 0
pxor xtmp2, xtmp2 ; xtmp2 = 0
pcmpgtb xtmp1, xq1 ; xtmp1 = mask 0xff or 0x00 if bit7 set
pcmpgtb xtmp2, xq2 ; xtmp2 = mask 0xff or 0x00 if bit7 set
pand xtmp1, xpoly ; xtmp1 = poly or 0x00
pand xtmp2, xpoly ; xtmp2 = poly or 0x00
XLDR xs1, [ptr+pos] ; Get next vector (source data1)
XLDR xs2, [ptr+pos+16] ; Get next vector (source data2)
paddb xq1, xq1 ; q1 = q1<<1
paddb xq2, xq2 ; q2 = q2<<1
pxor xq1, xtmp1 ; q1 = q1<<1 ^ poly_masked
pxor xq2, xtmp2 ; q2 = q2<<1 ^ poly_masked
jg next_vect ; Loop for each vect except 0
mov ptr, [arg2+PS+vec*PS] ;Get address of P parity vector
mov tmp, [arg2+(2*PS)+vec*PS] ;Get address of Q parity vector
pxor xp1, xs1 ;p1 ^= s1[0] - last source is already loaded
pxor xq1, xs1 ;q1 ^= 1 * s1[0]
pxor xp2, xs2 ;p2 ^= s2[0]
pxor xq2, xs2 ;q2 ^= 1 * s2[0]
XSTR [ptr+pos], xp1 ;Write parity P1 vector
XSTR [ptr+pos+16], xp2 ;Write parity P2 vector
XSTR [tmp+pos], xq1 ;Write parity Q1 vector
XSTR [tmp+pos+16], xq2 ;Write parity Q2 vector
add pos, 32
cmp pos, len
jle loop32
;; ------------------------------
;; Do last 16 Bytes remaining
add len, 32
cmp pos, len
je return_pass
loop16:
mov ptr, [arg2+vec*PS] ;Fetch last source pointer
mov tmp, vec ;Set tmp to point back to last vector
XLDR xs1, [ptr+pos] ;Preload last vector (source)
pxor xp1, xp1 ;p = 0
pxor xq1, xq1 ;q = 0
next_vect16:
sub tmp, 1 ;Inner loop for each source vector
mov ptr, [arg2+tmp*PS] ; get pointer to next vect
pxor xq1, xs1 ; q1 ^= s1
pxor xtmp1, xtmp1 ; xtmp = 0
pcmpgtb xtmp1, xq1 ; xtmp = mask 0xff or 0x00 if bit7 set
pand xtmp1, xpoly ; xtmp = poly or 0x00
pxor xp1, xs1 ; p ^= s
paddb xq1, xq1 ; q = q<<1
pxor xq1, xtmp1 ; q = q<<1 ^ poly_masked
XLDR xs1, [ptr+pos] ; Get next vector (source data)
jg next_vect16 ; Loop for each vect except 0
mov ptr, [arg2+PS+vec*PS] ;Get address of P parity vector
mov tmp, [arg2+(2*PS)+vec*PS] ;Get address of Q parity vector
pxor xp1, xs1 ;p ^= s[0] - last source is already loaded
pxor xq1, xs1 ;q ^= 1 * s[0]
XSTR [ptr+pos], xp1 ;Write parity P vector
XSTR [tmp+pos], xq1 ;Write parity Q vector
add pos, 16
cmp pos, len
jl loop16
return_pass:
mov return, 0
FUNC_RESTORE
ret
return_fail:
mov return, 1
FUNC_RESTORE
ret
endproc_frame
section .data
align 16
poly:
dq 0x1d1d1d1d1d1d1d1d, 0x1d1d1d1d1d1d1d1d
;;; func core, ver, snum
slversion pq_gen_sse, 00, 08, 0032