diff --git a/Build.cmake b/Build.cmake index 2cea720..7fc357d 100644 --- a/Build.cmake +++ b/Build.cmake @@ -26,7 +26,19 @@ set(SRC_FILES ${SRC_FILES} ${SRC_PLATFORM_SPECIFIC}) # Create the g3log library - SET(G3LOG_LIBRARY g3logger) + SET(G3LOG_LIBRARY g3log) + + +IF(${CMAKE_SYSTEM_NAME} MATCHES "Linux") + message("CMAKE_INSTALL_PREFIX: ${CMAKE_INSTALL_PREFIX}") + IF( NOT CMAKE_INSTALL_PREFIX) + SET(CMAKE_INSTALL_PREFIX /usr/local) + ENDIF() + + set(CMAKE_INSTALL_RPATH ${CMAKE_INSTALL_PREFIX}) + set(CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE) + message("Install rpath location: ${CMAKE_INSTALL_RPATH}") +ENDIF() IF( G3_SHARED_LIB ) IF( WIN32 ) @@ -62,7 +74,7 @@ SET_TARGET_PROPERTIES(${G3LOG_LIBRARY} PROPERTIES LINKER_LANGUAGE CXX - OUTPUT_NAME g3logger + OUTPUT_NAME g3log CLEAN_DIRECT_OUTPUT 1 SOVERSION ${VERSION} ) diff --git a/CMakeLists.txt b/CMakeLists.txt index ffcc480..c3da915 100644 --- a/CMakeLists.txt +++ b/CMakeLists.txt @@ -6,80 +6,70 @@ # For more information see g3log/LICENSE or refer refer to http://unlicense.org # ============================================================================== - -# Below are details for compiling on Windows and Linux -# by default only an example g3log binary is created -# the performance and unit tests creation can be enabled by switching their -# OPTIONs from OFF to ON --- See below at around line 110 +# Below are details for compiling on Windows and Linux by default only an +# example g3log binary is created the performance and unit tests creation can be +# enabled by switching their OPTIONs from OFF to ON --- See below at around line +# 110 # === WINDOWS === -# Example for: Visual Studio 2013 (earlier should work too) -# 1. please use the "Visual Studio Command Prompt 12 (2013)" -# 2. from the g3log folder -# mkdir build -# cd build; -# 3. cmake -DCMAKE_BUILD_TYPE=Release -G "Visual Studio XXX" .. -# (cmake -DCMAKE_BUILD_TYPE=Release -G "Visual Studio 12") -# MAKE SURE you check the CMake documentation so you are using -# the correct bit flags(64 bit etc). The "XXX" needs -# tto be replaced for your specific build system, ref: cmake docs. -# -# (Example from Appveyor Ci: -# https://github.com/KjellKod/g3log/blob/master/appveyor.yml -# cmake -G "Visual Studio 14 2015 Win64" -DADD_G3LOG_UNIT_TEST=ON ..) +# Example for: Visual Studio 2013 (earlier should work too) 1. please use the +# "Visual Studio Command Prompt 12 (2013)" 2. from the g3log folder mkdir build +# cd build; 3. cmake -DCMAKE_BUILD_TYPE=Release -G "Visual Studio XXX" .. (cmake +# -DCMAKE_BUILD_TYPE=Release -G "Visual Studio 12") MAKE SURE you check the +# CMake documentation so you are using the correct bit flags(64 bit etc). The +# "XXX" needs tto be replaced for your specific build system, ref: cmake docs. # -# 4. msbuild g3log.sln /p:Configuration=Release +# (Example from Appveyor Ci: +# https://github.com/KjellKod/g3log/blob/master/appveyor.yml cmake -G "Visual +# Studio 14 2015 Win64" -DADD_G3LOG_UNIT_TEST=ON ..) # -# Try to run an example, such as: -# 5. Release\g3log-FATAL-contract.exe +# 1. msbuild g3log.sln /p:Configuration=Release # +# Try to run an example, such as: 5. Release\g3log-FATAL-contract.exe # -# === LINUX: === To try this out from folder g3log: -# mkdir build -# cd build -# >> create makefiles in g3log/build directory -# cmake -DCMAKE_BUILD_TYPE=Release .. -# make -jN (where N stands for number of cores you want to utilize) -# -# +# === LINUX: === To try this out from folder g3log: mkdir build cd build >> +# create makefiles in g3log/build directory cmake -DCMAKE_BUILD_TYPE=Release .. +# make -jN (where N stands for number of cores you want to utilize) # # === Clang on Linux === -# From g3log -# mkdir build && cd build -# cmake -DCMAKE_CXX_COMPILER=clang++ .. -# if you want to double-check settings: "VERBOSE=1 make" -# otherwise just run: "make -j" +# From g3log mkdir build && cd build cmake -DCMAKE_CXX_COMPILER=clang++ .. if +# you want to double-check settings: "VERBOSE=1 make" otherwise just run: +# "make -j" # # ============================================================================ -cmake_minimum_required (VERSION 3.2) +cmake_minimum_required(VERSION 3.2) -project (g3log CXX) +project(g3log CXX) -set (CMAKE_CXX_STANDARD 14) -set (CMAKE_CXX_STANDARD_REQUIRED ON) +set(CMAKE_CXX_STANDARD 14) +set(CMAKE_CXX_STANDARD_REQUIRED ON) if(NOT CMAKE_BUILD_TYPE AND NOT (MSVC_IDE OR XCODE)) - set(CMAKE_BUILD_TYPE Release CACHE STRING "Build type, one of: Release, Debug" FORCE) + set(CMAKE_BUILD_TYPE + Release + CACHE STRING "Build type, one of: Release, Debug" FORCE) endif() - -message( STATUS "Build type: ${CMAKE_BUILD_TYPE}" ) -message( STATUS "Configuration types: ${CMAKE_CONFIGURATION_TYPES}" ) +message(STATUS "Build type: ${CMAKE_BUILD_TYPE}") +message(STATUS "Configuration types: ${CMAKE_CONFIGURATION_TYPES}") # Detect 64 or 32 bit -if (CMAKE_SIZEOF_VOID_P EQUAL 8) - # 64-bit project - SET(64_BIT_OS TRUE) - message( STATUS "A 64-bit OS detected" ) - else() - SET(64_BIT_OS FALSE) - message( STATUS "A 32-bit OS detected" ) +if(CMAKE_SIZEOF_VOID_P EQUAL 8) + # 64-bit project + set(64_BIT_OS TRUE) + message(STATUS "A 64-bit OS detected") +else() + set(64_BIT_OS FALSE) + message(STATUS "A 32-bit OS detected") endif() -SET(MAJOR_VERSION 1) +# Calculate the version number +SET(MAJOR_VERSION 2) +SET(MINOR_VERSION 1) + IF ( NOT VERSION ) IF ( "${CMAKE_HOST_SYSTEM_NAME}" STREQUAL "Windows" ) message("windows: Extracting git software version") @@ -93,118 +83,93 @@ IF ( NOT VERSION ) execute_process(COMMAND bash "-c" "git rev-list --branches HEAD | wc -l | tr -d ' ' | tr -d '\n'" OUTPUT_VARIABLE GIT_VERSION WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}) ENDIF() - SET(MINOR_VERSION 3) math(EXPR VERSION-BASE ${GIT_VERSION}/255) math(EXPR VERSION-REMAINDER ${GIT_VERSION}%255) message( STATUS "git build version: ${GIT_VERSION}" ) message( STATUS "version base: ${VERSION-BASE}" ) message( STATUS "version remainder: ${VERSION-REMAINDER}" ) # SET(BUILD_NUMBER ${GIT_VERSION}) - SET(BUILD_NUMBER ${VERSION-BASE}) - SET(VERSION ${MAJOR_VERSION}.${MINOR_VERSION}.${BUILD_NUMBER}-${VERSION-REMAINDER}) + #SET(BUILD_NUMBER ${VERSION-BASE}) + #SET(VERSION ${MAJOR_VERSION}.${MINOR_VERSION}.${BUILD_NUMBER}-${VERSION-REMAINDER}) + SET(VERSION ${MAJOR_VERSION}.${MINOR_VERSION}.${GIT_VERSION}) ENDIF() message( STATUS "Software Version: ${VERSION}" ) +# ============================================================================ +# G3LOG OPTIONAL FEATURES +# ============================================================================ +include(${g3log_SOURCE_DIR}/Options.cmake) +# ============================================================================ +# G3LOG iOS BUILD SUPPORT +# ============================================================================ +include(${g3log_SOURCE_DIR}/iOSBuild.cmake) - # ============================================================================ - # G3LOG OPTIONAL FEATURES - # ============================================================================ - INCLUDE (${g3log_SOURCE_DIR}/Options.cmake) +if(G3_IOS_LIB) + # G3_IOS_LIB is the pass used to generate all the other cmakefiles for the + # different architectures needed for the universal library. So we're done at + # here. + return() +endif() +# ========================================================================= +# G3 Macro definitions in Options.cmake are written to file this avoids having +# to re-state your definitions in your source code or compile options +# ========================================================================== +include(${g3log_SOURCE_DIR}/GenerateMacroDefinitionsFile.cmake) +# ========================================================================= +# G3LOG BUILD +# ========================================================================== +include(${g3log_SOURCE_DIR}/Build.cmake) - # ============================================================================ - # G3LOG iOS BUILD SUPPORT - # ============================================================================ - INCLUDE (${g3log_SOURCE_DIR}/iOSBuild.cmake) +# ============================================================================ +# EXAMPLE OPTIONS: By defauls is ON. This will create 'g3log-FATAL-* examples' +# ============================================================================ +# DISABLE WITH: -DADD_FATAL_EXAMPLE=OFF +include(${g3log_SOURCE_DIR}/example/Example.cmake) - if(G3_IOS_LIB) - # G3_IOS_LIB is the pass used to generate all the other cmakefiles for the - # different architectures needed for the universal library. So we're done - # at here. - return() - endif() +# ============================================================================ +# PERFORMANCE TEST OPTIONS: Performance operations for g3log +# ============================================================================ +# ENABLE WITH: -DADD_G3LOG_PERFORMANCE=ON +include(${g3log_SOURCE_DIR}/test_performance/Performance.cmake) +# ========================================================================== +# UNIT TEST OPTIONS: +# ============================================================================ +# ENABLE WITH: -DADD_G3LOG_UNIT_TEST=ON +include(${g3log_SOURCE_DIR}/test_unit/Test.cmake) +# ========================================================================== +# CMAKE INSTALL AND CPACK OPTIONS: +# ========================================================================== +# +# Alternative 1: Package handling is done AFTER all other CMake setup usage: +# make package Check the output result and install accordingly. +# +# Alternative 2: usage: make; sudo make install +# +# For OSX you can also install an older version using 'brew install' +# +# ========================================================================== +include(${g3log_SOURCE_DIR}/CPackLists.txt) - # ========================================================================= - # G3 Macro definitions in Options.cmake are written to file - # this avoids having to re-state your definitions in your source code - # or compile options - #========================================================================== - INCLUDE (${g3log_SOURCE_DIR}/GenerateMacroDefinitionsFile.cmake) +if(MINGW) + # this enables strerror_s + add_definitions(-DMINGW_HAS_SECURE_API) +endif() - - - # ========================================================================= - # G3LOG BUILD - #========================================================================== - INCLUDE (${g3log_SOURCE_DIR}/Build.cmake) - - - - # ============================================================================ - # EXAMPLE OPTIONS: By defauls is ON. This will create 'g3log-FATAL-* examples' - # ============================================================================ - # DISABLE WITH: -DADD_FATAL_EXAMPLE=OFF - INCLUDE (${g3log_SOURCE_DIR}/example/Example.cmake) - - - - # ============================================================================ - # PERFORMANCE TEST OPTIONS: Performance operations for g3log - # ============================================================================ - # ENABLE WITH: -DADD_G3LOG_PERFORMANCE=ON - INCLUDE (${g3log_SOURCE_DIR}/test_performance/Performance.cmake) - - - - # ========================================================================== - # UNIT TEST OPTIONS: - # ============================================================================ - # ENABLE WITH: -DADD_G3LOG_UNIT_TEST=ON - INCLUDE (${g3log_SOURCE_DIR}/test_unit/Test.cmake) - - - - # ========================================================================== - # CMAKE INSTALL AND CPACK OPTIONS: - # ========================================================================== - # - # Alternative 1: - # Package handling is done AFTER all other CMake setup - # usage: make package - # Check the output result and install accordingly. - # - # Alternative 2: - # usage: make; sudo make install - # - # For OSX you can also install an older version using 'brew install' - # - # ========================================================================== - INCLUDE (${g3log_SOURCE_DIR}/CPackLists.txt) - - -IF(MINGW) - # this enables strerror_s - ADD_DEFINITIONS(-DMINGW_HAS_SECURE_API) -ENDIF() - -IF (NOT MSVC) - message( STATUS "\n\n +if(NOT MSVC) + message( + STATUS + "\n\n ******************************************************************* Please do 'make clean-cmake' before next cmake generation. It is a good idea to purge your build directory of CMake generated cache files ******************************************************************* - " ) - add_custom_target(clean-cmake - COMMAND ${CMAKE_COMMAND} -P ${g3log_SOURCE_DIR}/CleanAll.cmake - ) -ENDIF() - - - - - + ") + add_custom_target(clean-cmake COMMAND ${CMAKE_COMMAND} -P + ${g3log_SOURCE_DIR}/CleanAll.cmake) +endif() diff --git a/CPackLists.txt b/CPackLists.txt index 0a94606..4ba614d 100644 --- a/CPackLists.txt +++ b/CPackLists.txt @@ -10,10 +10,12 @@ IF(${CMAKE_SYSTEM_NAME} MATCHES "Linux") IF(NOT CPACK_PACKAGING_INSTALL_PREFIX) IF(NOT CMAKE_INSTALL_PREFIX_INITIALIZED_TO_DEFAULT) SET(CPACK_PACKAGING_INSTALL_PREFIX ${CMAKE_INSTALL_PREFIX}) + # set(CMAKE_INSTALL_RPATH ${CMAKE_INSTALL_PREFIX}) ELSE() SET(CPACK_PACKAGING_INSTALL_PREFIX /usr/local) ENDIF() ENDIF() + # message("Install rpath location: ${CMAKE_INSTALL_RPATH}") ENDIF() INCLUDE(CMakePackageConfigHelpers) @@ -32,8 +34,8 @@ SET(CPACK_RESOURCE_FILE_LICENSE ${g3log_SOURCE_DIR}/LICENSE) SET(CPACK_PACKAGE_VENDOR "KjellKod") IF(INSTALL_G3LOG) - INSTALL( TARGETS g3logger - EXPORT g3logger-targets + INSTALL( TARGETS g3log + EXPORT g3log-targets ARCHIVE DESTINATION ${CMAKE_INSTALL_LIBDIR} COMPONENT libraries LIBRARY DESTINATION ${CMAKE_INSTALL_LIBDIR} COMPONENT libraries RUNTIME DESTINATION ${CMAKE_INSTALL_BINDIR} COMPONENT libraries @@ -45,27 +47,27 @@ IF(INSTALL_G3LOG) COMPONENT headers) INSTALL( - EXPORT g3logger-targets - FILE g3loggerTargets.cmake - DESTINATION ${CMAKE_INSTALL_LIBDIR}/cmake/g3logger + EXPORT g3log-targets + FILE g3logTargets.cmake + DESTINATION ${CMAKE_INSTALL_LIBDIR}/cmake/g3log ) CONFIGURE_PACKAGE_CONFIG_FILE( - ${PROJECT_SOURCE_DIR}/cmake/g3loggerConfig.cmake - ${CMAKE_CURRENT_BINARY_DIR}/g3loggerConfig.cmake - INSTALL_DESTINATION ${CMAKE_INSTALL_LIBDIR}/cmake/g3logger + ${PROJECT_SOURCE_DIR}/cmake/g3logConfig.cmake + ${CMAKE_CURRENT_BINARY_DIR}/g3logConfig.cmake + INSTALL_DESTINATION ${CMAKE_INSTALL_LIBDIR}/cmake/g3log ) install( - FILES ${CMAKE_CURRENT_BINARY_DIR}/g3loggerConfig.cmake - DESTINATION ${CMAKE_INSTALL_LIBDIR}/cmake/g3logger + FILES ${CMAKE_CURRENT_BINARY_DIR}/g3logConfig.cmake + DESTINATION ${CMAKE_INSTALL_LIBDIR}/cmake/g3log ) ENDIF() SET(CPACK_COMPONENTS_ALL libraries headers) -SET(CPACK_COMPONENT_LIBRARIES_DISPLAY_NAME "G3Log libraries") -SET(CPACK_COMPONENT_HEADERS_DISPLAY_NAME "G3Log C++ headers") +SET(CPACK_COMPONENT_LIBRARIES_DISPLAY_NAME "g3log libraries") +SET(CPACK_COMPONENT_HEADERS_DISPLAY_NAME "g3log C++ headers") IF(${CMAKE_SYSTEM_NAME} MATCHES "Linux") SET(CPACK_GENERATOR "DEB") @@ -97,7 +99,6 @@ ENDIF() # CPACK_OUTPUT_FILE_PREFIX # CMAKE_INSTALL_PREFIX - INCLUDE(CPack) diff --git a/Options.cmake b/Options.cmake index 457a8f5..9a0432d 100644 --- a/Options.cmake +++ b/Options.cmake @@ -147,7 +147,7 @@ IF (MSVC OR MINGW) ENDIF (MSVC OR MINGW) message( STATUS "\n\n\n" ) -option(INSTALL_G3LOG "Enable installation of g3logger. (Projects embedding g3logger may want to turn this OFF.)" ON) +option(INSTALL_G3LOG "Enable installation of g3log. (Projects embedding g3log may want to turn this OFF.)" ON) diff --git a/README.markdown b/README.markdown index 4595b15..9fa4754 100644 --- a/README.markdown +++ b/README.markdown @@ -453,16 +453,14 @@ cd build; ## CMake module -g3log comes with a CMake module. Once installed, it can be found under `${CMAKE_INSTALL_PREFIX}/lib/cmake/g3logger`. Users can use g3log in a CMake-based project this way: +g3log comes with a CMake module. Once installed, it can be found under `${CMAKE_INSTALL_PREFIX}/lib/cmake/g3log`. Users can use g3log in a CMake-based project this way: ``` -find_package(g3logger CONFIG REQUIRED) -target_link_libraries(main PRIVATE g3logger) +find_package(g3log CONFIG REQUIRED) +target_link_libraries(main PRIVATE g3log) ``` -*Note:* The CMake package name here is `g3logger`, not `g3log`. - -To make sure that CMake can find g3log(or g3logger), you also need to tell CMake where to search for it: +To make sure that CMake can find g3log, you also need to tell CMake where to search for it: ``` cmake .. -DCMAKE_PREFIX_PATH= ``` diff --git a/appveyor.yml b/appveyor.yml index 26d0596..a9014aa 100644 --- a/appveyor.yml +++ b/appveyor.yml @@ -32,5 +32,6 @@ after_build: - cmd /c Release\g3log-FATAL-contract.exe || exit /B 0 - tree /A /F c:\g3log - cpack -G "NSIS;ZIP" + - cpack -C Release - ctest -C Release --verbose diff --git a/cmake/g3loggerConfig.cmake b/cmake/g3logConfig.cmake similarity index 50% rename from cmake/g3loggerConfig.cmake rename to cmake/g3logConfig.cmake index 93c1bf0..76d1194 100644 --- a/cmake/g3loggerConfig.cmake +++ b/cmake/g3logConfig.cmake @@ -2,18 +2,18 @@ # FindG3log # ------- # -# Find libg3logger, G3log is an asynchronous, "crash safe", logger that is easy to use with default logging sinks or you can add your own. +# Find libg3log, G3log is an asynchronous, "crash safe", logger that is easy to use with default logging sinks or you can add your own. # -# This defines the cmake import target "g3logger" you can use like this +# This defines the cmake import target "g3log" you can use like this #``` -# target_link_libraries(YourTarget PUBLIC g3logger) +# target_link_libraries(YourTarget PUBLIC g3log) #``` # Variables and features # ---------------------- -# * ``G3LOG`` -- if this environment variable is set, it'll be used as a hint as to where the g3logger files are. +# * ``G3LOG`` -- if this environment variable is set, it'll be used as a hint as to where the g3log files are. # * ``G3LOG_INCLUDE_DIRS`` -- raw cmake variable with include path # * ``G3LOG_LIBRARIES`` -- raw cmake variable with library link line -# * ``G3LOG_FOUND`` -- check if the lib was found without using the newer ``if(TARGET g3logger)...`` +# * ``G3LOG_FOUND`` -- check if the lib was found without using the newer ``if(TARGET g3log)...`` include(FindPackageHandleStandardArgs) include(SelectLibraryConfigurations) @@ -22,19 +22,19 @@ include(SelectLibraryConfigurations) find_package(Threads REQUIRED) -if (NOT TARGET g3logger) - include("${CMAKE_CURRENT_LIST_DIR}/g3loggerTargets.cmake") +if (NOT TARGET g3log) + include("${CMAKE_CURRENT_LIST_DIR}/g3logTargets.cmake") - get_target_property(G3LOG_INCLUDE_DIR g3logger INTERFACE_INCLUDE_DIRECTORIES) - - get_target_property(G3LOG_LIBRARY_DEBUG g3logger IMPORTED_IMPLIB_DEBUG) + get_target_property(G3LOG_INCLUDE_DIR g3log INTERFACE_INCLUDE_DIRECTORIES) + get_target_property(G3LOG_LIBRARY_DEBUG g3log IMPORTED_IMPLIB_DEBUG) + if (G3LOG_LIBRARY_DEBUG MATCHES ".*-NOTFOUND") - get_target_property(G3LOG_LIBRARY_DEBUG g3logger IMPORTED_LOCATION_DEBUG) + get_target_property(G3LOG_LIBRARY_DEBUG g3log IMPORTED_LOCATION_DEBUG) endif () - get_target_property(G3LOG_LIBRARY_RELEASE g3logger IMPORTED_IMPLIB_RELEASE) + get_target_property(G3LOG_LIBRARY_RELEASE g3log IMPORTED_IMPLIB_RELEASE) if (G3LOG_LIBRARY_RELEASE MATCHES ".*-NOTFOUND") - get_target_property(G3LOG_LIBRARY_RELEASE g3logger IMPORTED_LOCATION_RELEASE) + get_target_property(G3LOG_LIBRARY_RELEASE g3log IMPORTED_LOCATION_RELEASE) endif () select_library_configurations(G3LOG) @@ -47,8 +47,7 @@ if (NOT TARGET g3logger) endif () endif () -find_package_handle_standard_args(G3LOG - REQUIRED_VARS G3LOG_INCLUDE_DIR G3LOG_LIBRARY) +find_package_handle_standard_args(G3LOG REQUIRED_VARS G3LOG_INCLUDE_DIR G3LOG_LIBRARY) mark_as_advanced(G3LOG_INCLUDE_DIR G3LOG_LIBRARY) set(G3LOG_INCLUDE_DIRS ${G3LOG_INCLUDE_DIR}) set(G3LOG_LIBRARIES ${G3LOG_LIBRARY}) diff --git a/iOSBuild.cmake b/iOSBuild.cmake index 0380937..45a075e 100644 --- a/iOSBuild.cmake +++ b/iOSBuild.cmake @@ -99,7 +99,7 @@ if(G3_IOS_LIB) VERBATIM ) - set(LIB_G3 libg3logger.a) + set(LIB_G3 libg3log.a) add_custom_command( OUTPUT ${LIB_G3} COMMAND lipo -create @@ -116,6 +116,6 @@ if(G3_IOS_LIB) "${ARM_BINARY_DIR}/Binaries/${CMAKE_BUILD_TYPE}/${LIB_G3}" VERBATIM ) - add_custom_target(g3logger ALL DEPENDS ${CMAKE_CURRENT_BINARY_DIR}/${LIB_G3}) + add_custom_target(g3log ALL DEPENDS ${CMAKE_CURRENT_BINARY_DIR}/${LIB_G3}) endif(G3_IOS_LIB) diff --git a/src/g3log/sinkhandle.hpp b/src/g3log/sinkhandle.hpp index ec93a22..d0128a5 100644 --- a/src/g3log/sinkhandle.hpp +++ b/src/g3log/sinkhandle.hpp @@ -19,7 +19,7 @@ namespace g3 { // Only through the Sinkhandle can, and should, the real sink's specific API // be called. // - // The real sink will be owned by the g3logger. If the real sink is deleted + // The real sink will be owned by g3log. If the real sink is deleted // calls to sink's API through the SinkHandle will return an exception embedded // in the resulting future. Ref: SinkHandle::call template diff --git a/test_unit/Test.cmake b/test_unit/Test.cmake index 9338f0b..691e1c2 100644 --- a/test_unit/Test.cmake +++ b/test_unit/Test.cmake @@ -83,7 +83,7 @@ IF( NOT(MSVC)) set_target_properties(${test} PROPERTIES COMPILE_FLAGS "-isystem -pthread ") ENDIF( NOT(MSVC)) - target_link_libraries(${test} g3logger gtest_main) + target_link_libraries(${test} g3log gtest_main) add_test( ${test} ${test} ) ENDFOREACH(test) diff --git a/test_unit/test_io.cpp b/test_unit/test_io.cpp index 5a4f1c0..ac981a5 100644 --- a/test_unit/test_io.cpp +++ b/test_unit/test_io.cpp @@ -67,7 +67,7 @@ TEST(Initialization, No_Logger_Initialized___Expecting_LOG_calls_to_be_Still_OKi EXPECT_TRUE(g3::logLevel(FATAL)); EXPECT_TRUE(g3::logLevel(G3LOG_DEBUG)); EXPECT_TRUE(g3::logLevel(WARNING)); - std::string err_msg1 = "Hey. I am not instantiated but I still should not crash. (I am g3logger)"; + std::string err_msg1 = "Hey. I am not instantiated but I still should not crash. (I am g3log)"; std::string err_msg3_ignored = "This uninitialized message should be ignored"; try { LOG(INFO) << err_msg1; // nothing happened. level not ON @@ -93,7 +93,7 @@ TEST(Initialization, No_Logger_Initialized___Expecting_LOG_calls_to_be_Still_OKi EXPECT_TRUE(g3::logLevel(FATAL)); EXPECT_TRUE(g3::logLevel(G3LOG_DEBUG)); EXPECT_TRUE(g3::logLevel(WARNING)); - std::string err_msg1 = "Hey. I am not instantiated but I still should not crash. (I am g3logger)"; + std::string err_msg1 = "Hey. I am not instantiated but I still should not crash. (I am g3log)"; std::string err_msg3_ignored = "This uninitialized message should be ignored"; try {