;****************************************************************************** ;* MMX optimized DSP utils ;* Copyright (c) 2008 Loren Merritt ;* ;* This file is part of FFmpeg. ;* ;* FFmpeg is free software; you can redistribute it and/or ;* modify it under the terms of the GNU Lesser General Public ;* License as published by the Free Software Foundation; either ;* version 2.1 of the License, or (at your option) any later version. ;* ;* FFmpeg is distributed in the hope that it will be useful, ;* but WITHOUT ANY WARRANTY; without even the implied warranty of ;* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ;* Lesser General Public License for more details. ;* ;* You should have received a copy of the GNU Lesser General Public ;* License along with FFmpeg; if not, write to the Free Software ;* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA ;****************************************************************************** %include "libavutil/x86/x86inc.asm" %include "x86util.asm" SECTION_RODATA pb_f: times 16 db 15 pb_zzzzzzzz77777777: times 8 db -1 pb_7: times 8 db 7 pb_zzzz3333zzzzbbbb: db -1,-1,-1,-1,3,3,3,3,-1,-1,-1,-1,11,11,11,11 pb_zz11zz55zz99zzdd: db -1,-1,1,1,-1,-1,5,5,-1,-1,9,9,-1,-1,13,13 pb_revwords: db 14, 15, 12, 13, 10, 11, 8, 9, 6, 7, 4, 5, 2, 3, 0, 1 pd_16384: times 4 dd 16384 SECTION_TEXT %macro SCALARPRODUCT 1 ; int scalarproduct_int16(int16_t *v1, int16_t *v2, int order, int shift) cglobal scalarproduct_int16_%1, 3,3,4, v1, v2, order, shift shl orderq, 1 add v1q, orderq add v2q, orderq neg orderq movd m3, shiftm pxor m2, m2 .loop: movu m0, [v1q + orderq] movu m1, [v1q + orderq + mmsize] pmaddwd m0, [v2q + orderq] pmaddwd m1, [v2q + orderq + mmsize] paddd m2, m0 paddd m2, m1 add orderq, mmsize*2 jl .loop %if mmsize == 16 movhlps m0, m2 paddd m2, m0 psrad m2, m3 pshuflw m0, m2, 0x4e %else psrad m2, m3 pshufw m0, m2, 0x4e %endif paddd m2, m0 movd eax, m2 RET ; int scalarproduct_and_madd_int16(int16_t *v1, int16_t *v2, int16_t *v3, int order, int mul) cglobal scalarproduct_and_madd_int16_%1, 4,4,8, v1, v2, v3, order, mul shl orderq, 1 movd m7, mulm %if mmsize == 16 pshuflw m7, m7, 0 punpcklqdq m7, m7 %else pshufw m7, m7, 0 %endif pxor m6, m6 add v1q, orderq add v2q, orderq add v3q, orderq neg orderq .loop: movu m0, [v2q + orderq] movu m1, [v2q + orderq + mmsize] mova m4, [v1q + orderq] mova m5, [v1q + orderq + mmsize] movu m2, [v3q + orderq] movu m3, [v3q + orderq + mmsize] pmaddwd m0, m4 pmaddwd m1, m5 pmullw m2, m7 pmullw m3, m7 paddd m6, m0 paddd m6, m1 paddw m2, m4 paddw m3, m5 mova [v1q + orderq], m2 mova [v1q + orderq + mmsize], m3 add orderq, mmsize*2 jl .loop %if mmsize == 16 movhlps m0, m6 paddd m6, m0 pshuflw m0, m6, 0x4e %else pshufw m0, m6, 0x4e %endif paddd m6, m0 movd eax, m6 RET %endmacro INIT_MMX SCALARPRODUCT mmx2 INIT_XMM SCALARPRODUCT sse2 %macro SCALARPRODUCT_LOOP 1 align 16 .loop%1: sub orderq, mmsize*2 %if %1 mova m1, m4 mova m4, [v2q + orderq] mova m0, [v2q + orderq + mmsize] palignr m1, m0, %1 palignr m0, m4, %1 mova m3, m5 mova m5, [v3q + orderq] mova m2, [v3q + orderq + mmsize] palignr m3, m2, %1 palignr m2, m5, %1 %else mova m0, [v2q + orderq] mova m1, [v2q + orderq + mmsize] mova m2, [v3q + orderq] mova m3, [v3q + orderq + mmsize] %endif %define t0 [v1q + orderq] %define t1 [v1q + orderq + mmsize] %ifdef ARCH_X86_64 mova m8, t0 mova m9, t1 %define t0 m8 %define t1 m9 %endif pmaddwd m0, t0 pmaddwd m1, t1 pmullw m2, m7 pmullw m3, m7 paddw m2, t0 paddw m3, t1 paddd m6, m0 paddd m6, m1 mova [v1q + orderq], m2 mova [v1q + orderq + mmsize], m3 jg .loop%1 %if %1 jmp .end %endif %endmacro ; int scalarproduct_and_madd_int16(int16_t *v1, int16_t *v2, int16_t *v3, int order, int mul) cglobal scalarproduct_and_madd_int16_ssse3, 4,5,10, v1, v2, v3, order, mul shl orderq, 1 movd m7, mulm pshuflw m7, m7, 0 punpcklqdq m7, m7 pxor m6, m6 mov r4d, v2d and r4d, 15 and v2q, ~15 and v3q, ~15 mova m4, [v2q + orderq] mova m5, [v3q + orderq] ; linear is faster than branch tree or jump table, because the branches taken are cyclic (i.e. predictable) cmp r4d, 0 je .loop0 cmp r4d, 2 je .loop2 cmp r4d, 4 je .loop4 cmp r4d, 6 je .loop6 cmp r4d, 8 je .loop8 cmp r4d, 10 je .loop10 cmp r4d, 12 je .loop12 SCALARPRODUCT_LOOP 14 SCALARPRODUCT_LOOP 12 SCALARPRODUCT_LOOP 10 SCALARPRODUCT_LOOP 8 SCALARPRODUCT_LOOP 6 SCALARPRODUCT_LOOP 4 SCALARPRODUCT_LOOP 2 SCALARPRODUCT_LOOP 0 .end: movhlps m0, m6 paddd m6, m0 pshuflw m0, m6, 0x4e paddd m6, m0 movd eax, m6 RET ;----------------------------------------------------------------------------- ; void ff_apply_window_int16(int16_t *output, const int16_t *input, ; const int16_t *window, unsigned int len) ;----------------------------------------------------------------------------- %macro REVERSE_WORDS_MMXEXT 1-2 pshufw %1, %1, 0x1B %endmacro %macro REVERSE_WORDS_SSE2 1-2 pshuflw %1, %1, 0x1B pshufhw %1, %1, 0x1B pshufd %1, %1, 0x4E %endmacro %macro REVERSE_WORDS_SSSE3 2 pshufb %1, %2 %endmacro ; dst = (dst * src) >> 15 ; pmulhw cuts off the bottom bit, so we have to lshift by 1 and add it back ; in from the pmullw result. %macro MUL16FIXED_MMXEXT 3 ; dst, src, temp mova %3, %1 pmulhw %1, %2 pmullw %3, %2 psrlw %3, 15 psllw %1, 1 por %1, %3 %endmacro ; dst = ((dst * src) + (1<<14)) >> 15 %macro MUL16FIXED_SSSE3 3 ; dst, src, unused pmulhrsw %1, %2 %endmacro %macro APPLY_WINDOW_INT16 3 ; %1=instruction set, %2=mmxext/sse2 bit exact version, %3=has_ssse3 cglobal apply_window_int16_%1, 4,5,6, output, input, window, offset, offset2 lea offset2q, [offsetq-mmsize] %if %2 mova m5, [pd_16384] %elifidn %1, ssse3 mova m5, [pb_revwords] ALIGN 16 %endif .loop: %if %2 ; This version expands 16-bit to 32-bit, multiplies by the window, ; adds 16384 for rounding, right shifts 15, then repacks back to words to ; save to the output. The window is reversed for the second half. mova m3, [windowq+offset2q] mova m4, [ inputq+offset2q] pxor m0, m0 punpcklwd m0, m3 punpcklwd m1, m4 pmaddwd m0, m1 paddd m0, m5 psrad m0, 15 pxor m2, m2 punpckhwd m2, m3 punpckhwd m1, m4 pmaddwd m2, m1 paddd m2, m5 psrad m2, 15 packssdw m0, m2 mova [outputq+offset2q], m0 REVERSE_WORDS m3 mova m4, [ inputq+offsetq] pxor m0, m0 punpcklwd m0, m3 punpcklwd m1, m4 pmaddwd m0, m1 paddd m0, m5 psrad m0, 15 pxor m2, m2 punpckhwd m2, m3 punpckhwd m1, m4 pmaddwd m2, m1 paddd m2, m5 psrad m2, 15 packssdw m0, m2 mova [outputq+offsetq], m0 %elif %3 ; This version does the 16x16->16 multiplication in-place without expanding ; to 32-bit. The ssse3 version is bit-identical. mova m0, [windowq+offset2q] mova m1, [ inputq+offset2q] pmulhrsw m1, m0 REVERSE_WORDS m0, m5 pmulhrsw m0, [ inputq+offsetq ] mova [outputq+offset2q], m1 mova [outputq+offsetq ], m0 %else ; This version does the 16x16->16 multiplication in-place without expanding ; to 32-bit. The mmxext and sse2 versions do not use rounding, and ; therefore are not bit-identical to the C version. mova m0, [windowq+offset2q] mova m1, [ inputq+offset2q] mova m2, [ inputq+offsetq ] MUL16FIXED m1, m0, m3 REVERSE_WORDS m0 MUL16FIXED m2, m0, m3 mova [outputq+offset2q], m1 mova [outputq+offsetq ], m2 %endif add offsetd, mmsize sub offset2d, mmsize jae .loop REP_RET %endmacro INIT_MMX %define REVERSE_WORDS REVERSE_WORDS_MMXEXT %define MUL16FIXED MUL16FIXED_MMXEXT APPLY_WINDOW_INT16 mmxext, 0, 0 APPLY_WINDOW_INT16 mmxext_ba, 1, 0 INIT_XMM %define REVERSE_WORDS REVERSE_WORDS_SSE2 APPLY_WINDOW_INT16 sse2, 0, 0 APPLY_WINDOW_INT16 sse2_ba, 1, 0 APPLY_WINDOW_INT16 ssse3_atom, 0, 1 %define REVERSE_WORDS REVERSE_WORDS_SSSE3 APPLY_WINDOW_INT16 ssse3, 0, 1 ; void add_hfyu_median_prediction_mmx2(uint8_t *dst, const uint8_t *top, const uint8_t *diff, int w, int *left, int *left_top) cglobal add_hfyu_median_prediction_mmx2, 6,6,0, dst, top, diff, w, left, left_top movq mm0, [topq] movq mm2, mm0 movd mm4, [left_topq] psllq mm2, 8 movq mm1, mm0 por mm4, mm2 movd mm3, [leftq] psubb mm0, mm4 ; t-tl add dstq, wq add topq, wq add diffq, wq neg wq jmp .skip .loop: movq mm4, [topq+wq] movq mm0, mm4 psllq mm4, 8 por mm4, mm1 movq mm1, mm0 ; t psubb mm0, mm4 ; t-tl .skip: movq mm2, [diffq+wq] %assign i 0 %rep 8 movq mm4, mm0 paddb mm4, mm3 ; t-tl+l movq mm5, mm3 pmaxub mm3, mm1 pminub mm5, mm1 pminub mm3, mm4 pmaxub mm3, mm5 ; median paddb mm3, mm2 ; +residual %if i==0 movq mm7, mm3 psllq mm7, 56 %else movq mm6, mm3 psrlq mm7, 8 psllq mm6, 56 por mm7, mm6 %endif %if i<7 psrlq mm0, 8 psrlq mm1, 8 psrlq mm2, 8 %endif %assign i i+1 %endrep movq [dstq+wq], mm7 add wq, 8 jl .loop movzx r2d, byte [dstq-1] mov [leftq], r2d movzx r2d, byte [topq-1] mov [left_topq], r2d RET %macro ADD_HFYU_LEFT_LOOP 1 ; %1 = is_aligned add srcq, wq add dstq, wq neg wq %%.loop: mova m1, [srcq+wq] mova m2, m1 psllw m1, 8 paddb m1, m2 mova m2, m1 pshufb m1, m3 paddb m1, m2 pshufb m0, m5 mova m2, m1 pshufb m1, m4 paddb m1, m2 %if mmsize == 16 mova m2, m1 pshufb m1, m6 paddb m1, m2 %endif paddb m0, m1 %if %1 mova [dstq+wq], m0 %else movq [dstq+wq], m0 movhps [dstq+wq+8], m0 %endif add wq, mmsize jl %%.loop mov eax, mmsize-1 sub eax, wd movd m1, eax pshufb m0, m1 movd eax, m0 RET %endmacro ; int add_hfyu_left_prediction(uint8_t *dst, const uint8_t *src, int w, int left) INIT_MMX cglobal add_hfyu_left_prediction_ssse3, 3,3,7, dst, src, w, left .skip_prologue: mova m5, [pb_7] mova m4, [pb_zzzz3333zzzzbbbb] mova m3, [pb_zz11zz55zz99zzdd] movd m0, leftm psllq m0, 56 ADD_HFYU_LEFT_LOOP 1 INIT_XMM cglobal add_hfyu_left_prediction_sse4, 3,3,7, dst, src, w, left mova m5, [pb_f] mova m6, [pb_zzzzzzzz77777777] mova m4, [pb_zzzz3333zzzzbbbb] mova m3, [pb_zz11zz55zz99zzdd] movd m0, leftm pslldq m0, 15 test srcq, 15 jnz add_hfyu_left_prediction_ssse3.skip_prologue test dstq, 15 jnz .unaligned ADD_HFYU_LEFT_LOOP 1 .unaligned: ADD_HFYU_LEFT_LOOP 0 ; float scalarproduct_float_sse(const float *v1, const float *v2, int len) cglobal scalarproduct_float_sse, 3,3,2, v1, v2, offset neg offsetq shl offsetq, 2 sub v1q, offsetq sub v2q, offsetq xorps xmm0, xmm0 .loop: movaps xmm1, [v1q+offsetq] mulps xmm1, [v2q+offsetq] addps xmm0, xmm1 add offsetq, 16 js .loop movhlps xmm1, xmm0 addps xmm0, xmm1 movss xmm1, xmm0 shufps xmm0, xmm0, 1 addss xmm0, xmm1 %ifndef ARCH_X86_64 movd r0m, xmm0 fld dword r0m %endif RET ; extern void ff_emu_edge_core(uint8_t *buf, const uint8_t *src, x86_reg linesize, ; x86_reg start_y, x86_reg end_y, x86_reg block_h, ; x86_reg start_x, x86_reg end_x, x86_reg block_w); ; ; The actual function itself is below. It basically wraps a very simple ; w = end_x - start_x ; if (w) { ; if (w > 22) { ; jump to the slow loop functions ; } else { ; jump to the fast loop functions ; } ; } ; ; ... and then the same for left/right extend also. See below for loop ; function implementations. Fast are fixed-width, slow is variable-width %macro EMU_EDGE_FUNC 1 %ifdef ARCH_X86_64 %define w_reg r10 cglobal emu_edge_core_%1, 6, 7, 1 mov r11, r5 ; save block_h %else %define w_reg r6 cglobal emu_edge_core_%1, 2, 7, 0 mov r4, r4m ; end_y mov r5, r5m ; block_h %endif ; start with vertical extend (top/bottom) and body pixel copy mov w_reg, r7m sub w_reg, r6m ; w = start_x - end_x sub r5, r4 %ifdef ARCH_X86_64 sub r4, r3 %else sub r4, dword r3m %endif cmp w_reg, 22 jg .slow_v_extend_loop %ifdef ARCH_X86_32 mov r2, r2m ; linesize %endif sal w_reg, 7 ; w * 128 %ifdef PIC lea rax, [.emuedge_v_extend_1 - (.emuedge_v_extend_2 - .emuedge_v_extend_1)] add w_reg, rax %else lea w_reg, [.emuedge_v_extend_1 - (.emuedge_v_extend_2 - .emuedge_v_extend_1)+w_reg] %endif call w_reg ; fast top extend, body copy and bottom extend .v_extend_end: ; horizontal extend (left/right) mov w_reg, r6m ; start_x sub r0, w_reg %ifdef ARCH_X86_64 mov r3, r0 ; backup of buf+block_h*linesize mov r5, r11 %else mov r0m, r0 ; backup of buf+block_h*linesize mov r5, r5m %endif test w_reg, w_reg jz .right_extend cmp w_reg, 22 jg .slow_left_extend_loop mov r1, w_reg dec w_reg ; FIXME we can do a if size == 1 here if that makes any speed difference, test me sar w_reg, 1 sal w_reg, 6 ; r0=buf+block_h*linesize,r10(64)/r6(32)=start_x offset for funcs ; r6(rax)/r3(ebx)=val,r2=linesize,r1=start_x,r5=block_h %ifdef PIC lea rax, [.emuedge_extend_left_2] add w_reg, rax %else lea w_reg, [.emuedge_extend_left_2+w_reg] %endif call w_reg ; now r3(64)/r0(32)=buf,r2=linesize,r11/r5=block_h,r6/r3=val, r10/r6=end_x, r1=block_w .right_extend: %ifdef ARCH_X86_32 mov r0, r0m mov r5, r5m %endif mov w_reg, r7m ; end_x mov r1, r8m ; block_w mov r4, r1 sub r1, w_reg jz .h_extend_end ; if (end_x == block_w) goto h_extend_end cmp r1, 22 jg .slow_right_extend_loop dec r1 ; FIXME we can do a if size == 1 here if that makes any speed difference, test me sar r1, 1 sal r1, 6 %ifdef PIC lea rax, [.emuedge_extend_right_2] add r1, rax %else lea r1, [.emuedge_extend_right_2+r1] %endif call r1 .h_extend_end: RET %ifdef ARCH_X86_64 %define vall al %define valh ah %define valw ax %define valw2 r10w %define valw3 r3w %ifdef WIN64 %define valw4 r4w %else ; unix64 %define valw4 r3w %endif %define vald eax %else %define vall bl %define valh bh %define valw bx %define valw2 r6w %define valw3 valw2 %define valw4 valw3 %define vald ebx %define stack_offset 0x14 %endif %endmacro ; macro to read/write a horizontal number of pixels (%2) to/from registers ; on x86-64, - fills xmm0-15 for consecutive sets of 16 pixels ; - if (%2 & 15 == 8) fills the last 8 bytes into rax ; - else if (%2 & 8) fills 8 bytes into mm0 ; - if (%2 & 7 == 4) fills the last 4 bytes into rax ; - else if (%2 & 4) fills 4 bytes into mm0-1 ; - if (%2 & 3 == 3) fills 2 bytes into r10/r3, and 1 into eax ; (note that we're using r3 for body/bottom because it's a shorter ; opcode, and then the loop fits in 128 bytes) ; - else fills remaining bytes into rax ; on x86-32, - fills mm0-7 for consecutive sets of 8 pixels ; - if (%2 & 7 == 4) fills 4 bytes into ebx ; - else if (%2 & 4) fills 4 bytes into mm0-7 ; - if (%2 & 3 == 3) fills 2 bytes into r6, and 1 into ebx ; - else fills remaining bytes into ebx ; writing data out is in the same way %macro READ_NUM_BYTES 3 %assign %%src_off 0 ; offset in source buffer %assign %%smidx 0 ; mmx register idx %assign %%sxidx 0 ; xmm register idx %ifnidn %3, mmx %rep %2/16 movdqu xmm %+ %%sxidx, [r1+%%src_off] %assign %%src_off %%src_off+16 %assign %%sxidx %%sxidx+1 %endrep ; %2/16 %endif ; !mmx %ifdef ARCH_X86_64 %if (%2-%%src_off) == 8 mov rax, [r1+%%src_off] %assign %%src_off %%src_off+8 %endif ; (%2-%%src_off) == 8 %endif ; x86-64 %rep (%2-%%src_off)/8 movq mm %+ %%smidx, [r1+%%src_off] %assign %%src_off %%src_off+8 %assign %%smidx %%smidx+1 %endrep ; (%2-%%dst_off)/8 %if (%2-%%src_off) == 4 mov vald, [r1+%%src_off] %elif (%2-%%src_off) & 4 movd mm %+ %%smidx, [r1+%%src_off] %assign %%src_off %%src_off+4 %endif ; (%2-%%src_off) ==/& 4 %if (%2-%%src_off) == 1 mov vall, [r1+%%src_off] %elif (%2-%%src_off) == 2 mov valw, [r1+%%src_off] %elif (%2-%%src_off) == 3 %ifidn %1, top mov valw2, [r1+%%src_off] %elifidn %1, body mov valw3, [r1+%%src_off] %elifidn %1, bottom mov valw4, [r1+%%src_off] %endif ; %1 ==/!= top mov vall, [r1+%%src_off+2] %endif ; (%2-%%src_off) == 1/2/3 %endmacro ; READ_NUM_BYTES %macro WRITE_NUM_BYTES 3 %assign %%dst_off 0 ; offset in destination buffer %assign %%dmidx 0 ; mmx register idx %assign %%dxidx 0 ; xmm register idx %ifnidn %3, mmx %rep %2/16 movdqu [r0+%%dst_off], xmm %+ %%dxidx %assign %%dst_off %%dst_off+16 %assign %%dxidx %%dxidx+1 %endrep ; %2/16 %endif %ifdef ARCH_X86_64 %if (%2-%%dst_off) == 8 mov [r0+%%dst_off], rax %assign %%dst_off %%dst_off+8 %endif ; (%2-%%dst_off) == 8 %endif ; x86-64 %rep (%2-%%dst_off)/8 movq [r0+%%dst_off], mm %+ %%dmidx %assign %%dst_off %%dst_off+8 %assign %%dmidx %%dmidx+1 %endrep ; (%2-%%dst_off)/8 %if (%2-%%dst_off) == 4 mov [r0+%%dst_off], vald %elif (%2-%%dst_off) & 4 movd [r0+%%dst_off], mm %+ %%dmidx %assign %%dst_off %%dst_off+4 %endif ; (%2-%%dst_off) ==/& 4 %if (%2-%%dst_off) == 1 mov [r0+%%dst_off], vall %elif (%2-%%dst_off) == 2 mov [r0+%%dst_off], valw %elif (%2-%%dst_off) == 3 %ifidn %1, top mov [r0+%%dst_off], valw2 %elifidn %1, body mov [r0+%%dst_off], valw3 %elifidn %1, bottom mov [r0+%%dst_off], valw4 %endif ; %1 ==/!= top mov [r0+%%dst_off+2], vall %endif ; (%2-%%dst_off) == 1/2/3 %endmacro ; WRITE_NUM_BYTES ; vertical top/bottom extend and body copy fast loops ; these are function pointers to set-width line copy functions, i.e. ; they read a fixed number of pixels into set registers, and write ; those out into the destination buffer ; r0=buf,r1=src,r2=linesize,r3(64)/r3m(32)=start_x,r4=end_y,r5=block_h ; r6(eax/64)/r3(ebx/32)=val_reg %macro VERTICAL_EXTEND 1 %assign %%n 1 %rep 22 ALIGN 128 .emuedge_v_extend_ %+ %%n: ; extend pixels above body %ifdef ARCH_X86_64 test r3 , r3 ; if (!start_y) jz .emuedge_copy_body_ %+ %%n %+ _loop ; goto body %else ; ARCH_X86_32 cmp dword r3m, 0 je .emuedge_copy_body_ %+ %%n %+ _loop %endif ; ARCH_X86_64/32 READ_NUM_BYTES top, %%n, %1 ; read bytes .emuedge_extend_top_ %+ %%n %+ _loop: ; do { WRITE_NUM_BYTES top, %%n, %1 ; write bytes add r0 , r2 ; dst += linesize %ifdef ARCH_X86_64 dec r3d %else ; ARCH_X86_32 dec dword r3m %endif ; ARCH_X86_64/32 jnz .emuedge_extend_top_ %+ %%n %+ _loop ; } while (--start_y) ; copy body pixels .emuedge_copy_body_ %+ %%n %+ _loop: ; do { READ_NUM_BYTES body, %%n, %1 ; read bytes WRITE_NUM_BYTES body, %%n, %1 ; write bytes add r0 , r2 ; dst += linesize add r1 , r2 ; src += linesize dec r4d jnz .emuedge_copy_body_ %+ %%n %+ _loop ; } while (--end_y) ; copy bottom pixels test r5 , r5 ; if (!block_h) jz .emuedge_v_extend_end_ %+ %%n ; goto end sub r1 , r2 ; src -= linesize READ_NUM_BYTES bottom, %%n, %1 ; read bytes .emuedge_extend_bottom_ %+ %%n %+ _loop: ; do { WRITE_NUM_BYTES bottom, %%n, %1 ; write bytes add r0 , r2 ; dst += linesize dec r5d jnz .emuedge_extend_bottom_ %+ %%n %+ _loop ; } while (--block_h) .emuedge_v_extend_end_ %+ %%n: %ifdef ARCH_X86_64 ret %else ; ARCH_X86_32 rep ret %endif ; ARCH_X86_64/32 %assign %%n %%n+1 %endrep %endmacro VERTICAL_EXTEND ; left/right (horizontal) fast extend functions ; these are essentially identical to the vertical extend ones above, ; just left/right separated because number of pixels to extend is ; obviously not the same on both sides. ; for reading, pixels are placed in eax (x86-64) or ebx (x86-64) in the ; lowest two bytes of the register (so val*0x0101), and are splatted ; into each byte of mm0 as well if n_pixels >= 8 %macro READ_V_PIXEL 3 mov vall, %2 mov valh, vall %if %1 >= 8 movd mm0, vald %ifidn %3, mmx punpcklwd mm0, mm0 punpckldq mm0, mm0 %else ; !mmx pshufw mm0, mm0, 0 %endif ; mmx %endif ; %1 >= 8 %endmacro %macro WRITE_V_PIXEL 2 %assign %%dst_off 0 %rep %1/8 movq [%2+%%dst_off], mm0 %assign %%dst_off %%dst_off+8 %endrep %if %1 & 4 %if %1 >= 8 movd [%2+%%dst_off], mm0 %else ; %1 < 8 mov [%2+%%dst_off] , valw mov [%2+%%dst_off+2], valw %endif ; %1 >=/< 8 %assign %%dst_off %%dst_off+4 %endif ; %1 & 4 %if %1&2 mov [%2+%%dst_off], valw %endif ; %1 & 2 %endmacro ; r0=buf+block_h*linesize, r1=start_x, r2=linesize, r5=block_h, r6/r3=val %macro LEFT_EXTEND 1 %assign %%n 2 %rep 11 ALIGN 64 .emuedge_extend_left_ %+ %%n: ; do { sub r0, r2 ; dst -= linesize READ_V_PIXEL %%n, [r0+r1], %1 ; read pixels WRITE_V_PIXEL %%n, r0 ; write pixels dec r5 jnz .emuedge_extend_left_ %+ %%n ; } while (--block_h) %ifdef ARCH_X86_64 ret %else ; ARCH_X86_32 rep ret %endif ; ARCH_X86_64/32 %assign %%n %%n+2 %endrep %endmacro ; LEFT_EXTEND ; r3/r0=buf+block_h*linesize, r2=linesize, r11/r5=block_h, r0/r6=end_x, r6/r3=val %macro RIGHT_EXTEND 1 %assign %%n 2 %rep 11 ALIGN 64 .emuedge_extend_right_ %+ %%n: ; do { %ifdef ARCH_X86_64 sub r3, r2 ; dst -= linesize READ_V_PIXEL %%n, [r3+w_reg-1], %1 ; read pixels WRITE_V_PIXEL %%n, r3+r4-%%n ; write pixels dec r11 %else ; ARCH_X86_32 sub r0, r2 ; dst -= linesize READ_V_PIXEL %%n, [r0+w_reg-1], %1 ; read pixels WRITE_V_PIXEL %%n, r0+r4-%%n ; write pixels dec r5 %endif ; ARCH_X86_64/32 jnz .emuedge_extend_right_ %+ %%n ; } while (--block_h) %ifdef ARCH_X86_64 ret %else ; ARCH_X86_32 rep ret %endif ; ARCH_X86_64/32 %assign %%n %%n+2 %endrep %ifdef ARCH_X86_32 %define stack_offset 0x10 %endif %endmacro ; RIGHT_EXTEND ; below follow the "slow" copy/extend functions, these act on a non-fixed ; width specified in a register, and run a loop to copy the full amount ; of bytes. They are optimized for copying of large amounts of pixels per ; line, so they unconditionally splat data into mm registers to copy 8 ; bytes per loop iteration. It could be considered to use xmm for x86-64 ; also, but I haven't optimized this as much (i.e. FIXME) %macro V_COPY_NPX 4-5 %if %0 == 4 test w_reg, %4 jz .%1_skip_%4_px %else ; %0 == 5 .%1_%4_px_loop: %endif %3 %2, [r1+cnt_reg] %3 [r0+cnt_reg], %2 add cnt_reg, %4 %if %0 == 5 sub w_reg, %4 test w_reg, %5 jnz .%1_%4_px_loop %endif .%1_skip_%4_px: %endmacro %macro V_COPY_ROW 3 %ifidn %1, bottom sub r1, linesize %endif .%1_copy_loop: xor cnt_reg, cnt_reg %ifidn %3, mmx %define linesize r2m V_COPY_NPX %1, mm0, movq, 8, 0xFFFFFFF8 %else ; !mmx V_COPY_NPX %1, xmm0, movdqu, 16, 0xFFFFFFF0 %ifdef ARCH_X86_64 %define linesize r2 V_COPY_NPX %1, rax , mov, 8 %else ; ARCH_X86_32 %define linesize r2m V_COPY_NPX %1, mm0, movq, 8 %endif ; ARCH_X86_64/32 %endif ; mmx V_COPY_NPX %1, vald, mov, 4 V_COPY_NPX %1, valw, mov, 2 V_COPY_NPX %1, vall, mov, 1 mov w_reg, cnt_reg %ifidn %1, body add r1, linesize %endif add r0, linesize dec %2 jnz .%1_copy_loop %endmacro %macro SLOW_V_EXTEND 1 .slow_v_extend_loop: ; r0=buf,r1=src,r2(64)/r2m(32)=linesize,r3(64)/r3m(32)=start_x,r4=end_y,r5=block_h ; r11(64)/r3(later-64)/r2(32)=cnt_reg,r6(64)/r3(32)=val_reg,r10(64)/r6(32)=w=end_x-start_x %ifdef ARCH_X86_64 push r11 ; save old value of block_h test r3, r3 %define cnt_reg r11 jz .do_body_copy ; if (!start_y) goto do_body_copy V_COPY_ROW top, r3, %1 %else cmp dword r3m, 0 %define cnt_reg r2 je .do_body_copy ; if (!start_y) goto do_body_copy V_COPY_ROW top, dword r3m, %1 %endif .do_body_copy: V_COPY_ROW body, r4, %1 %ifdef ARCH_X86_64 pop r11 ; restore old value of block_h %define cnt_reg r3 %endif test r5, r5 %ifdef ARCH_X86_64 jz .v_extend_end %else jz .skip_bottom_extend %endif V_COPY_ROW bottom, r5, %1 %ifdef ARCH_X86_32 .skip_bottom_extend: mov r2, r2m %endif jmp .v_extend_end %endmacro %macro SLOW_LEFT_EXTEND 1 .slow_left_extend_loop: ; r0=buf+block_h*linesize,r2=linesize,r6(64)/r3(32)=val,r5=block_h,r4=cntr,r10/r6=start_x mov r4, 8 sub r0, linesize READ_V_PIXEL 8, [r0+w_reg], %1 .left_extend_8px_loop: movq [r0+r4-8], mm0 add r4, 8 cmp r4, w_reg jle .left_extend_8px_loop sub r4, 8 cmp r4, w_reg jge .left_extend_loop_end .left_extend_2px_loop: mov [r0+r4], valw add r4, 2 cmp r4, w_reg jl .left_extend_2px_loop .left_extend_loop_end: dec r5 jnz .slow_left_extend_loop %ifdef ARCH_X86_32 mov r2, r2m %endif jmp .right_extend %endmacro %macro SLOW_RIGHT_EXTEND 1 .slow_right_extend_loop: ; r3(64)/r0(32)=buf+block_h*linesize,r2=linesize,r4=block_w,r11(64)/r5(32)=block_h, ; r10(64)/r6(32)=end_x,r6/r3=val,r1=cntr %ifdef ARCH_X86_64 %define buf_reg r3 %define bh_reg r11 %else %define buf_reg r0 %define bh_reg r5 %endif lea r1, [r4-8] sub buf_reg, linesize READ_V_PIXEL 8, [buf_reg+w_reg-1], %1 .right_extend_8px_loop: movq [buf_reg+r1], mm0 sub r1, 8 cmp r1, w_reg jge .right_extend_8px_loop add r1, 8 cmp r1, w_reg je .right_extend_loop_end .right_extend_2px_loop: sub r1, 2 mov [buf_reg+r1], valw cmp r1, w_reg jg .right_extend_2px_loop .right_extend_loop_end: dec bh_reg jnz .slow_right_extend_loop jmp .h_extend_end %endmacro %macro emu_edge 1 EMU_EDGE_FUNC %1 VERTICAL_EXTEND %1 LEFT_EXTEND %1 RIGHT_EXTEND %1 SLOW_V_EXTEND %1 SLOW_LEFT_EXTEND %1 SLOW_RIGHT_EXTEND %1 %endmacro emu_edge sse %ifdef ARCH_X86_32 emu_edge mmx %endif ;----------------------------------------------------------------------------- ; void ff_vector_clip_int32(int32_t *dst, const int32_t *src, int32_t min, ; int32_t max, unsigned int len) ;----------------------------------------------------------------------------- ; %1 = number of xmm registers used ; %2 = number of inline load/process/store loops per asm loop ; %3 = process 4*mmsize (%3=0) or 8*mmsize (%3=1) bytes per loop ; %4 = CLIPD function takes min/max as float instead of int (CLIPD_SSE2) ; %5 = suffix %macro VECTOR_CLIP_INT32 4-5 cglobal vector_clip_int32%5, 5,5,%2, dst, src, min, max, len %if %4 cvtsi2ss m4, minm cvtsi2ss m5, maxm %else movd m4, minm movd m5, maxm %endif SPLATD m4 SPLATD m5 .loop: %assign %%i 1 %rep %2 mova m0, [srcq+mmsize*0*%%i] mova m1, [srcq+mmsize*1*%%i] mova m2, [srcq+mmsize*2*%%i] mova m3, [srcq+mmsize*3*%%i] %if %3 mova m7, [srcq+mmsize*4*%%i] mova m8, [srcq+mmsize*5*%%i] mova m9, [srcq+mmsize*6*%%i] mova m10, [srcq+mmsize*7*%%i] %endif CLIPD m0, m4, m5, m6 CLIPD m1, m4, m5, m6 CLIPD m2, m4, m5, m6 CLIPD m3, m4, m5, m6 %if %3 CLIPD m7, m4, m5, m6 CLIPD m8, m4, m5, m6 CLIPD m9, m4, m5, m6 CLIPD m10, m4, m5, m6 %endif mova [dstq+mmsize*0*%%i], m0 mova [dstq+mmsize*1*%%i], m1 mova [dstq+mmsize*2*%%i], m2 mova [dstq+mmsize*3*%%i], m3 %if %3 mova [dstq+mmsize*4*%%i], m7 mova [dstq+mmsize*5*%%i], m8 mova [dstq+mmsize*6*%%i], m9 mova [dstq+mmsize*7*%%i], m10 %endif %assign %%i %%i+1 %endrep add srcq, mmsize*4*(%2+%3) add dstq, mmsize*4*(%2+%3) sub lend, mmsize*(%2+%3) jg .loop REP_RET %endmacro INIT_MMX mmx %define SPLATD SPLATD_MMX %define CLIPD CLIPD_MMX VECTOR_CLIP_INT32 0, 1, 0, 0 INIT_XMM sse2 %define SPLATD SPLATD_SSE2 VECTOR_CLIP_INT32 6, 1, 0, 0, _int %define CLIPD CLIPD_SSE2 VECTOR_CLIP_INT32 6, 2, 0, 1 INIT_XMM sse4 %define CLIPD CLIPD_SSE41 %ifdef m8 VECTOR_CLIP_INT32 11, 1, 1, 0 %else VECTOR_CLIP_INT32 6, 1, 0, 0 %endif