The error path frees all side data, but forgets to reset the side data
count. This can blow up later in av_frame_unref() and free_side_data().
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit a400edbb6d)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This ensures that the CFLAGS and LDFLAGS are actually applied.
Fixes an incorrect change introduced with the clean-up in commit
cfcaf6b38e.
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 754f4957d7)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
When matroska_execute_seekhead() is called, it goes through the list of
seekhead entries and attempts to read elements not read yet. When doing
this, the parser can find further SeekHead elements, and will extend the
matroska->seekhead list. This can lead to a (practically) infinite loop
with certain broken files. (Maybe it can happen even with valid files.
The demuxer doesn't seem to check correctly whether an element has
already been read.)
Fix this by ignoring elements that were added to the seekhead field
during executing seekhead entries.
This does not fix the possible situation when multiple SeekHead elements
after the file header (i.e. occur after the "before_pos" file position)
point to the same elements. These elements will probably be parsed
multiple times, likely leading to bugs.
Fixes ticket #4162.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 6551acab68)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
For test images manually generated to contain only up prediction,
timing results:
8380x3032 255x185
before: 138635 1992
after: 139232 1996
Actually jumping to the proper version depending on the alignment:
8380x3032: 138767
A 0.5% speed improvement for gigantic images is not worth the code
duplication.
Fixes ticket #4148
Signed-off-by: Christophe Gisquet <christophe.gisquet@gmail.com>
Tested-by: Benoit Fouet <benoit.fouet@free.fr>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2e0935965b824bc641b7e0bafafcbb1e36027f79':
Drop the unofficial extension prefix for MPEG and MPEG-TS formats
See: fdcb2873e1
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3cec81f4d4f26b62bc2d22bb450bbf51ec3a7f09':
mov: allocate the tag value dynamically
Conflicts:
libavformat/mov.c
See: f31445a82d
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e352b293712ff7cbde67eba3ce3f8510b037de09':
mov: Add an option for exporting all metadata
Conflicts:
libavformat/isom.h
libavformat/mov.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This prevents the situation when user set option to 0 and ffserver
threats it as not set value, so applies the default.
Signed-off-by: Lukasz Marek <lukasz.m.luki2@gmail.com>
Options are already set to its defaults by AVOption API.
The only difference is for qmin, new default is 2, ffserver set to 3.
It is dead code because if condition is not meet unless user set option to 0.
Meeting condition would mean that ffserver overwrites explicity set option.
Signed-off-by: Lukasz Marek <lukasz.m.luki2@gmail.com>
* commit '5639ed9abb58311f82cf3499b682d228290adb09':
mov: do not truncate the language-prefixed tag
Conflicts:
libavformat/mov.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '604c9b1196c70d79bbbc1f23e75f6a8253a74da3':
rtsp: move the CONFIG_ macros to the beginning of the check
Conflicts:
libavformat/rtsp.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* cigaes/master:
configure: add a note about pkg-config --static.
configure: add optional pkg-config helper and use it.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Try to detect "$cc -static" without "pkg-config --static".
Also, when a library detection using pkg-config fails,
make it explicit this was pkg-config.
The require variant dies if the package is not present.
The check variant does not import the flags to the used list.
The new variant imports the flags if the package is present
but does not die if it is not.
The new call graph is: require -> use -> check.
Use use_pkg_config for libx264 and libsmbclient: more readable
and three external call less per library.
This allows to load metadata entries longer than 1024 bytes.
Displaying them is still limited to 1024 characters, but applications
can load them fully now.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
The file is already present in git and by using it we can perform more tests
without the need of fate samples
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e4a77dc204f80a6876cbd91de9b71c30feebe119':
Make the RELEASE file match with the most recent tag
Conflicts:
RELEASE
Not merged as the tag is not a FFmpeg version
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The format is now:
-bsf:X filter1[=opt1=str1/opt2=str2],filter2
ie the parameters are appended after the filter name using '='. As ','
has been reserved already for the list of filters, '/' is just an
example of token separation for now, but that could become part of the
API to avoid each bsf using its own tokenization.
The proper solution would be using AVOption, but this is overkill for now.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The new reference.pnm is a freely licensed replacement. The photo has
been taken by Reinhard Tartler on August 28 2014, and is licensed under
the expat license as stated at http://www.jclark.com/xml/copying.txt
This convinces the pre-receive hook to not consider all *.pnm files as
text files to reduce the patch sizes and avoids triggering whitespace
checks,
Contains a correction by Janne Grunau <janne-libav@jannau.net>
Use 'if (CONFIG_APNG_DECODER)' where needed, so that the compiler can
optimize out some portion of code.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
There is no need to memset the zlib output buffer, as there is no
blending happening there. Instead, do not blend when the dispose
operation is set to 'background' (tranparent black).
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '01eac895ab350027467ffbe7278740f89ae8be75':
rtmpproto: Only prepend @setDataFrame for onMetaData and |RtmpSampleAccess
Conflicts:
libavformat/rtmpproto.c
See: 60fd790f38
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3c3b8003a13d9c3668c0bb6d79d2376da3b2b352':
rtmpproto: Simplify code for copying data into the output packet
Conflicts:
libavformat/rtmpproto.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This fixes the build on compilers that interpreted the earlier
code as a variable length array (which we intentionally disallow).
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows one to specify templated segment names for init-segments,
media-segments, and for the base-url in the case of single-file.
Signed-off-by: Martin Storsjö <martin@martin.st>
Currently, when streaming to an RTMP server, any time a packet of type
RTMP_PT_NOTIFY is encountered, the packet is prepended with @setDataFrame
before it gets sent to the server. This is incorrect; only packets for
onMetaData and |RtmpSampleAccess should invoke @setDataFrame on the RTMP
server. Specifically, the current bug manifests itself when trying to
stream onTextData or onCuePoint invocations.
This fix addresses that problem and ensures that the @setDataFrame is
only prepended for onMetaData and |RtmpSampleAccess.
Since data is fed to the rtmp_write function in smaller pieces (depending
on the calling IO buffer size), we can't generally assume that the
whole packet (or even the whole command string) is available at once,
therefore we can only check the command string once the full packet
has been transferred to us for sending.
Based on a patch by Jeffrey Wescott.
Signed-off-by: Martin Storsjö <martin@martin.st>
We try to avoid mixing av_malloc with av_realloc, since av_malloc
may be implemented with functions that can't (formally) be mixed
with the functions used in av_realloc.
Signed-off-by: Martin Storsjö <martin@martin.st>
Fixes out of array access
Fixes: signal_sigsegv_35bd0f0_1182_cov_791726764_STRUCT_B_Samsung_4.bit
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1973079417e8701b52ba810a72cb6c7c6f7f9a56':
opusdec: make sure all substreams have the same number of coded samples
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '96fda42a8f9bf84beaaf7f5991d17f2a057de86c':
vf_interlace: get rid of useless loads
See: ca59b5b6ec
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'fbd6c97f9ca858140df16dd07200ea0d4bdc1a83':
lavu: fix memory leaks by using a mutex instead of atomics
Conflicts:
libavutil/buffer.c
The atomics code is left in place as a fallback for synchronization in the
absence of p/w32 threads. Our ABI did not requires applications to
only use threads (and matching ones) to what libavutil was build with
Our code also was not affected by the leak this change fixes, though
no question the atomics based implementation is not pretty at all.
First and foremost the code must work, being pretty comes after that.
If this causes problems, for example when libavutil is used by multiple
applications each using a different kind of threading system then the
default possibly has to be changed to the uglier atomics.
See: cea3a63ba3
Merged-by: Michael Niedermayer <michaelni@gmx.at>
So far ffmpeg used recommended configuration only for codec priv options.
ffmpeg will use now codec defaults and then apply recommended configuration
for all options. Recommended configuration possibly contains minimal
set of options to filful user configuration.
Signed-off-by: Lukasz Marek <lukasz.m.luki2@gmail.com>
ffmenc will store recommended encoder configuration if present.
This will allow the user to base on local defaults and
apply only explicitly set options.
If recommended encoder configuration is not present, then
non-default context's options are stored.
Signed-off-by: Lukasz Marek <lukasz.m.luki2@gmail.com>
By appending `?dscp=26` to the URL, IP packets will be classified as
AF31 (assured forwarding for multimedia flows with low probability of
loss). On congested network, this allows a user to assign priorities to
flows.
Signed-off-by: Vincent Bernat <vincent@bernat.im>
By appending `?dscp=26` to the URL, IP packets will be classified as
AF31 (assured forwarding for multimedia flows with low probability of
loss). On congested network, this allows a user to assign priorities to
flows.
Signed-off-by: Vincent Bernat <vincent@bernat.im>
Fixes out of array read
Fixes: signal_sigsegv_35bcf26_471_cov_2806540268_CAINIT_A_SHARP_4.bit
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The buffer pool has to atomically add and remove entries from the linked
list of available buffers. This was done by removing the entire list
with a CAS operation, working on it, and then setting it back again
(using a retry-loop in case another thread was doing the same thing).
This could effectively cause memory leaks: while a thread was working on
the buffer list, other threads would allocate new buffers, increasing
the pool's total size. There was no real leak, but since these extra
buffers were not needed, but not free'd either (except when the buffer
pool was destroyed), this had the same effects as a real leak. For some
reason, growth was exponential, and could easily kill the process due
to OOM in real-world uses.
Fix this by using a mutex to protect the list operations. The fancy
way atomics remove the whole list to work on it is not needed anymore,
which also avoids the situation which was causing the leak.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Also add no-op fallbacks when threading is disabled.
This helps keeping the code clean if Libav is compiled for targets
without threading. Since we assume that no threads of any kind are used
in such configurations, doing nothing is ok by definition.
Based on a patch by wm4 <nfxjfg@googlemail.com>.
Ensures that the header include order is such that winsock2.h is always
included before windows.h or that windows.h does not include winsock.h.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '79fd186a5035cf16fc0ab288d8f59da8b1ba2c0e':
lavf: Use MoveFileEx instead of rename/_wrename on windows
Conflicts:
configure
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9326d64ed1baadd7af60df6bbcc59cf1fefede48':
Share the utf8 to wchar conversion routine between lavf and lavu
Conflicts:
libavformat/os_support.h
libavutil/file_open.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This reverts commit b9d08c77a4.
After taking MoveFileEx into use, we can replace files with renames
on windows as well.
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows getting the normal unix semantics, where a rename
allows replacing an existing file.
Based on a suggestion by Reimar Döffinger.
Signed-off-by: Martin Storsjö <martin@martin.st>
This doesn't add any dependency on library internals, since this
only is a static inline function that gets built into each of the
calling functions - this is only to reduce the code duplication.
Signed-off-by: Martin Storsjö <martin@martin.st>
Fixes out of array read
Fixes: asan_heap-oob_177e222_885_cov_1532528832_MERGE_D_TI_3.bit
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
ffserver_save_avoption() and ffserver_opt_preset() have
redundant arguments. They can be obtained basing on media type.
This simplifies uses and reduce chance for a mistake.
Signed-off-by: Lukasz Marek <lukasz.m.luki2@gmail.com>
Fixes out of array access
Fixes: asan_heap-oob_22388d0_3435_cov_3297128910_small_roll5_FlashCine1.cine
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Also see [FFmpeg-devel] [PATCH] avformat/mov: strengthen some table allocations
which contains more fixes but is unfinished
Fixes: signal_sigabrt_7ffff6ac7bb9_3484_cov_1830000177_starfox2.mov
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array read
Fixes: asan_heap-oob_20b0a06_1962_cov_1907976991_delete_node_small.png
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array access
Fixes: asan_heap-oob_20a6c26_2690_cov_3434532168_mail.png
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '234fb81e3145e9c9aec4ec16266676fab7dc21fa':
movenc: Expose the fragment index as an avoption
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ee37620b6ae4783cda637408422044b2d14a688c':
movenc: Add a flag for indicating a discontinuous fragment
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This allows setting the right fragment number if doing
random-access writing of fragments, and also allows reading the
current sequence number.
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows creating a later mp4 fragment without sequentially
writing the earlier ones before (when called from a segmenter).
Normally when writing a fragmented mp4 file sequentially, the
first timestamps of a fragment are adjusted to match the
end of the previous fragment, to make sure the timestamp is the
same, even if it is calculated as the sum of previous fragment
durations. (And for the first packet in a file, the offset of
the first packet is written using an edit list.)
When writing an individual mp4 fragment discontinuously like this
(with potentially writing the earlier fragments separately later),
there's a risk of getting a gap in the timeline if the duration
field of the last packet in the previous fragment doesn't match up
with the start time of the next fragment.
Using this requires setting -avoid_negative_ts make_non_negative
(or -avoid_negative_ts 0).
Signed-off-by: Martin Storsjö <martin@martin.st>
Fixes out of array access
Fixes: signal_sigsegv_324b135_3398_cov_246853371_short.flac
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Based on discussion and patch from
"[FFmpeg-devel] [PATCH]Do not ask for mxf samples with unknown field dominance"
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
When the dimensions are the entire frame ones, and the dispose operation
is to reset to background, or the new frame overwrites the new one, then
consider the frame as a key one.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f20141d73f08ed0c8e875bd993a7143e19b266e3':
vorbis_parser: Include stdint.h in the header, to make it work standalone
See: e2e36a739d
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array read
Fixes: signal_sigsegv_3287332_2301_cov_2994954934_huffyuv.avi
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array read
Fixes: asan_heap-oob_4d2250_814_cov_2745172097_JACOsub_capability_tester.jss
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array access
Fixes: asan_heap-oob_1ca4f85_2760_cov_144449187_miss_congeniality_pegasus_ljpg.avi
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '57ed5a64feec4af1f16f9a74c63cfa9aa8147242':
hnm4: change width/height to int to fix hypothetical integer overflows
See: e23b18321f
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '51946d2de8bd4a4aada43b6ab41340b0f5eb4ecb':
vc1: Use the correct shift amount
See: a52f443714
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd25afb579facc83fd3a839f21411124d0b09f0ba':
vc1: Set the is_intra bitfield to all 1 when needed
Conflicts:
libavcodec/vc1_block.c
See: 04152a31cb
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b67138598ce158e3083f6295a27b63e2065d5ecb':
vc1: Simplify a little setting the intra variables
Conflicts:
libavcodec/vc1_block.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
dshow_capture.h sets up various flags before including windows headers
this must occur before other headers (like os_support.h) include these
headers without the setup
This could be fixed differently but for now this fixes building on mingw
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Keep the code as similar as possible across the codepaths to
ease spotting it for factorization.
Based on a patch from Michael Niedermayer <michaelni@gmx.at>.
The code currently set the information in at least 4 places, spare
some pointless loops.
Make the code in the loop a little uniform to make easier factorize
it out later.
* commit '960aff379da46dcaff61504a57714d4d4e758e41':
lavf: Use wchar functions for filenames on windows for mkdir/rmdir/rename/unlink
Conflicts:
libavformat/os_support.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b9d08c77a44390b0848c06f20bc0e9e951ba6a3c':
lavf: Don't try to update files atomically with renames on windows
Conflicts:
libavformat/dashenc.c
libavformat/hdsenc.c
libavformat/internal.h
libavformat/smoothstreamingenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '40665d27e38e6a2f65037878202bd1a398c7683e':
flvdec: Document how the duration is retrieved at the end of the file
Conflicts:
libavformat/flvdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
These cases are not supported yet
Fixes assertion failure
Fixes: signal_sigabrt_7ffff6ac7bb9_1_cov_1553101927_00.jpg
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This makes sure that the internal utf8 path names are handled
properly - the normal file handling functions assume path names
are in the native codepage, which isn't utf8.
This assumes that the tools outside of lavf don't use the mkdir
definition. (The tools don't do the same reading of command line
parameters as wchar either - they probably won't handle all possible
unicode file parameters properly, but at least work more predictably
if no utf8/wchar conversion is involved.)
This is moved further down in os_support.h, since windows.h shouldn't
be included before winsock2.h, while io.h needs to be included before
the manual defines for lseek functions.
Signed-off-by: Martin Storsjö <martin@martin.st>
On windows, rename(2) will fail if the target file exists. On
unix this trick is used to make sure that people reading the file
either will get the full previous file, or the full new version
of the file, but no intermediate version.
Signed-off-by: Martin Storsjö <martin@martin.st>
In order to support multiple IDAT of fdAT chunks following an fcTL one,
transmit all the chunks between two fcTL ones (or between fcTL and IEND
one).
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'fe42f94ce1023f9c2f7e86404c60afcee5b078a9':
dashenc: Don't segment all video streams when one stream gets a keyframe
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '299d8ab104fb350254eb2e6d9ecdce892a2a55b1':
cook: Make sure there is enough extradata
See: c9e4554329
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '277ff7f5dc134f1c2dfc4ea0ef3540340482e3d2':
lavu: move internal define to the only places where it is used
Conflicts:
libavcodec/h264_cabac.c
libavutil/internal.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '065923b0781b06a2604f69f4e2c2407b7750a854':
mpegenc: prevent a NULL pointer dereference
Not merged, this is not needed, and could hide more serious issues
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This makes sure that segments actually start at a keyframe (and
makes sure we don't split segments twice in a row, with one segment
consisting of only a handful of packets), when one stream uses b-frames
while another one doesn't.
Signed-off-by: Martin Storsjö <martin@martin.st>
'ret' can only be used without initialization if s->height <= 0, which can
only happen if avctx->height <= 0, which is validated elsewhere. Doesn't hurt
to still initialize it though.
CC: libav-stable@libav.org
Bug-Id: CID 732296
In current versions of ffmpeg, when streaming to an RTMP server, anytime a packet of type
RTMP_PT_NOTIFY is encountered, the packet is prepended with @setDataFrame before it gets sent
to the server. This is incorrect; only packets for onMetaData and |RtmpSampleAccess should
invoke @setDataFrame on the RTMP server. Specifically, the current bug manifests
itself when trying to stream onTextData or onCuePoint invocations.
This fix addresses that problem and ensures that the @setDataFrame is only prepended
for onMetaData and |RtmpSampleAccess.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f856d9c2f314c493c672dfb9c876da182525da3d':
dashenc: Don't require the stream bitrate to be known
Conflicts:
libavformat/dashenc.c
See: 5f8fcdd448
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'eec7f032a903e06d249d1e8aa6630b65292bf40f':
lavf: Remove a redundant include of sys/stat.h
Conflicts:
libavformat/os_support.h
See: 49515cb840
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Don't write any bitrate attribute if it isn't known. As long as one
doesn't want automatic bitrate switching, playback can work just
fine even if it isn't set.
If strict standard compliance is requested, this is still considered
an error, since the attribute is mandatory according to the spec.
Based on a patch by Rodger Combs.
Signed-off-by: Martin Storsjö <martin@martin.st>
Ideally the compiler could figure this out on its own,
but it seems it can't.
An alternative that would avoid the messy explicit memcpy
would be to use a sub-struct for the parts that should
be preserved, which can then simply be assigned.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
As far as I can tell the value can never go outside
the int16_t type.
And especially the cost of the initialization is
reduced quite a bit by making it smaller.
Overall decoding speedup not measurable though.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
11674 -> 10877 decicycles on my Phenom II.
Overall speedup was unfortunately within measurement error.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* commit 'cd975d5658a1cbe99939df75db59d5ae9fbcb4e0':
hevc: Spin the mv_mpv_mode calls in a stand alone function
Conflicts:
libavcodec/hevc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '312daa15891dc7abb77a404fe927d5ee35c52a71':
vp9: Use the correct upper bound for seg_id
Conflicts:
libavcodec/vp9.h
libavcodec/vp9block.c
Not merged, the value was correct before as far as i can see
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd466d82faaf6e0e57a3a4be5e38e3902ef251ac3':
dvdsubdec: Do not leak on failure path
Conflicts:
libavcodec/dvdsubdec.c
See: 7fa9f7ef1c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Also only free it when it was not previously allocated to return to the
state prior to the failing function call
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'fd9badd3cb3b60f5c54dcea35523e1ecca2f67a6':
xwma: Do not leak on failure path
Conflicts:
libavformat/xwma.c
See: 375a0c03a9
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'aa8b39d999589154f79300de9038994d0093cd34':
lavc: Move the libtwolame encoder registration to the list for external libraries
Conflicts:
libavcodec/allcodecs.c
See: f5f98727b3
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This makes sure the default behaviour of using the internal encoder
stays the same regardless if libtwolame is enabled or not (as for
any external library).
This fixes fate-lavf-mpg if libav is built with libtwolame enabled.
CC: libav-stable@libav.org
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
* commit '7fd10f66b722eccc2ada9128766d002f6d751f79':
hdsenc: Clear the previous codec tag when setting up the chained muxer
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f918b8a2933a65020cbe490ec637d5485c11a692':
hdsenc: Use the right filename in an error message
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The chained flv muxer wants one set of tags - normally this set
could be signaled via the AVOutputFormat codec_tag field (as
smoothstreamingenc and dashenc do). hdsenc doesn't signal it, since
the FLV codec tag arrays aren't exported from flvenc.c. This can
lead to the caller keeping an original codec tag from the originating
container here, which would then be a mismatch for the FLV muxer.
Since we don't really care about what codec tag the caller might
have set, just clear it and let the lavf muxer layer set the right
one for the chained FLV muxer later instead.
Signed-off-by: Martin Storsjö <martin@martin.st>
This improves the handling of cases where the frame duration is not known
Fixes Ticket 4119
Fixes Ticket 1578
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
If a stream's bitrate is not set, this attempts to use its rc_max_rate;
if neither is set, it avoids writing a bandwidth attribute at all.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The libvorbis encoder already supports a small last frame, but the layer
above doesn't know that because we didn't register the small last frame
capability.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
simd_align_16 is a configure item that can be enabled or disabled,
it's not a variable containing a list of other configure items
as need_memalign previously. This was broken in eba2233b5.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Regression since 745730c9c2.
The dynamic buffer was not being used or freed.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
Using colons to separate the outdefs is deprecated. Switch to using '|'
to separate the list items.
Signed-off-by: Simon Thelen <ffmpeg-dev@c-14.de>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '85dc006b1a829726dd5e3a9b0fcc6a1dbfe6dffa':
lavc: fix bitshifts amount bigger than the type
Conflicts:
libavcodec/internal.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a28468d0daf4be14761c16a3ddd33266b2380123':
librtmp: append the correct field to the string
See: d1970929b5
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9257692ac15eff7b07540c1f61cebde0d8823fbd':
lavf: Only initialize s->offset once when using avoid_negative_ts make_zero
Conflicts:
libavformat/mux.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '40ed1cbf147d09fc0894bee160f0b6b6d9159fc5':
movenc: Allow writing a DASH sidx atom at the start of files
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3847f3ab58b3b74604807394247bf68827258103':
movenc: Add tfra entries for all tracks in a moof
Merged-by: Michael Niedermayer <michaelni@gmx.at>
When given a stream starting at dts=0, it would previously consider
s->offset as uninitialized and set an offset when the second packet
was written, ending up writing two packets with dts=0. By initializing
this field to AV_NOPTS_VALUE, we make sure that we only initialize it
once, on the first packet.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '2ded57371abead879bcee56da5131e5fac0d17ef':
movenc: Add support for writing sidx atoms for DASH segments
Conflicts:
Changelog
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2d9d6afb8d2f284f5e620ecc19f643d5cd3facb8':
movenc: Factorize adding fragment info into a separate function
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '0f9eb9165bb7d7982fdedf64f6bcec856f1bedd6':
movenc: Include empty tracks in iods when writing fragmented mp4
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is mapped to the faststart flag (which in this case
perhaps should be called "shift and write index at the
start of the file"), which for fragmented files will
write a sidx index at the start.
When segmenting DASH into files, there's usually one sidx
at the start of each segment (although it's not clear to me
whether that actually is necessary). When storing all of it
in one file, the MPD doesn't necessarily need to describe
the individual segments, but the offsets of the fragments can be
fetched from one large sidx atom at the start of the file. This
allows creating files for the DASH ISO BMFF on-demand profile.
Signed-off-by: Martin Storsjö <martin@martin.st>
Previously only tfra entries were added for the first track in each moof.
The frag_info array used for tfra can also be used for writing
other kinds of fragment indexes, where it's more important to
include all tracks.
When the separate_moof option is enabled (as in ismv), we write
a separate moof for each track, so this doesn't make any difference
in that case.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is mostly to serve as a reference example on how to segment
the output from the mp4 muxer, capable of writing the segment
list in four different ways:
- SegmentTemplate with SegmentTimeline
- SegmentTemplate with implicit segments
- SegmentList with individual files
- SegmentList with one single file per track, and byte ranges
The muxer is able to serve live content (with optional windowing)
or create a static segmented MPD.
In advanced cases, users will probably want to do the segmenting
in their own application code.
Signed-off-by: Martin Storsjö <martin@martin.st>
A flag "dash" is added, which enables the necessary flags for
creating DASH compatible fragments.
When this is enabled, one sidx atom is written for each track
before every moof atom.
Signed-off-by: Martin Storsjö <martin@martin.st>
By calling this after writing the moof the first time (for
calculating the moof size), we can avoid intermediate storage
of tfrf_offset in MOVTrack.
Signed-off-by: Martin Storsjö <martin@martin.st>
When writing fragmented streams with an empty initial moov,
we won't have any samples in any tracks when writing the
moov atom, thus trust that any tracks that are added actually
will be present.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'c64f3615118d757dcf76040fe5407bf2b3883206':
flvenc: Send new metadata when FLAG_METADATA_UPDATED is set.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '4d0cd5f58c892276716f46f4b2702915e5018215':
flvenc: move metadata updates into a single function
Conflicts:
libavformat/flvenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '16c01fb4347312b6d29a6498dad627665b96a20e':
hevc: remove an unused function parameter
Conflicts:
libavcodec/hevc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2c6a7f9348378f887066fb1669c46b9485e8ef3e':
hevc: do not store rqt_root_cbf in the context
Conflicts:
libavcodec/hevc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is a generic solution that will not reqiore modifications when new options are added.
This also fixes problem with current implementation when qmin or qmax=-1.
Only 8 bits was sent and read back as 255.
Fixes#1275Fixes#1461
Signed-off-by: Lukasz Marek <lukasz.m.luki2@gmail.com>
This commit allows to set codec's private option.
As side effect, it also improves preset support.
Signed-off-by: Lukasz Marek <lukasz.m.luki2@gmail.com>
Function allows to create string containing object's serialized options.
Such string may be passed back to av_set_options_string() in order to restore options.
Signed-off-by: Lukasz Marek <lukasz.m.luki2@gmail.com>
timecode_frame_start is set to -1 in avcodec_get_context_defaults3()
AVOptions API complains about it.
Signed-off-by: Lukasz Marek <lukasz.m.luki2@gmail.com>
* commit 'c00365b46d464ce47716315c1801818d811bdb9a':
aarch64: Make the function pointer tables position independent
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This allows running the code on android, where 64 bit binaries with
text relocations aren't allowed to be loaded.
Signed-off-by: Martin Storsjö <martin@martin.st>
In http_open_cnx, the patch restores the AVDictionary if connection needs to be re-tried
because of a authentication/redirect status code.
Previously, if a 401/407/30x status code was encountered, http_open_cnx would restart at the redo label, but any options
used by the underlying protocol would be missing because they were removed by the first attempt.
Signed-off-by: Brandon Lees <brandon@n-hega.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '8562c1483ba647f562e4c1df68a9231274b80e6b':
Icecast: Send content-type in all cases
See: 5e08b54f47
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3a6bb9735053c453f806ceab1d91124648d90aca':
Icecast: Send 100-continue header if possible
See: 17dc39e76b
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is needed because Icecast since version 2.4.1 doesn't default
to audio/mpeg anymore. AVOption default not used here, since a later
check if -content_type is set is performed and would break.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This allows for proper error reporting. Only do
this for non-legacy requests as only Icecast >2.4.0
will reply with a proper status.
Libav seems to accept both, 100 and 200 status codes, but
let's stay close to spec.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This permits replacing it by a optimized implementation
Based-on / Idea-from: 2e1704059a by Kieran Kunhya
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd16ec1b6db25bc348b0d4800c9a0c9b7070e3710':
atrac3plus: always initialize refwaves
The initialization is not needed, the array is never read before
being written to. Its merged anyway for robustness in respect to
future changes
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '60e0ee7ca25bd3bea54043b0607efe4cd51acaf3':
lpc: always initialize ref and err
The initialization is not needed, its merged anyway as it might
help suppressing warnings and might make the code more robust against
future changes
See: c4a36b6f70
See: 0dd99628ea
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a2448cfe167a4cd4eb631318550d4eef38fca24a':
jpeg2000: do not compute the same value twice
Conflicts:
libavcodec/jpeg2000.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '6abe7edabb7d57e82d7ea6312d30cf05d2192c5b':
ffv1: fix out-of-bounds read
The change should be harmless but theres no out of array access before
the change
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e9a6ae775dabef3942632e8d4ef95fff94a1b310':
dpxenc: mention missing break
Conflicts:
libavcodec/dpxenc.c
No change as the changed code is implemented differently in FFmpeg
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '28d82b7675bea76a1349070a3cdd737d964d4775':
vc1dec: refactor check with missing parenthesis
Conflicts:
libavcodec/vc1_mc.c
tests/ref/fate/vc1_ilaced_twomv
Theres no change to the reference checksums as this bug was not
in FFmpeg
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2c98dc75f2802a2fe91922d4a11b698b66420e5b':
vc1dec: always initialize tx and ty
Not merged, tx/ty are initialized on every codepath before use
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e3f50f247155216229e34f165bae8c329d5a001e':
dnxhdenc: check negative index
Conflicts:
libavcodec/dnxhdenc.c
Not merged, the cid index thats taken out of our table will be found again in
said table.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b1b1a7370e141c912e3d0bbaa668dcee05c3ad67':
display: fix order of operands
Conflicts:
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'bdcb5794f0c2d74371152303bffe4172671af264':
nellymoserenc: fix array index
Not merged, the original code was correct.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '8dd0a2c5cf40a8a49faae985adc11750b6429132':
libopusenc: prevent an out-of-bounds read by returning early
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '68a35473ed423a14731c418939fba7913647979a':
4xm: more thorought check for negative index and negative shift
Conflicts:
libavcodec/4xm.c
Mostly not merged, the added checks, check for impossible conditions
for paranoias sake they are replaced by asserts but thats probably overkill
the vlc table does not contain out of range values or holes,
nor does it permit the log2 values to become negative. Whenever a
log2 value reaches 0 the selected table no longer contains an entry to trigger
the case that would decrease it further
Adding such impossible checks would confuse the reader
Merged-by: Michael Niedermayer <michaelni@gmx.at>
add marcos GET_LS() GET_VF() LOAD_FILTER() LOAD_L1() GET_VF4() FIRST_LOAD() UPDATE_PTR() LOAD_SRCV() LOAD_SRCV8() GET_VFD() for POWER LE
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
According to the DASH spec, Representation IDs should be unique
across all adaptation sets. Fixing that and updating the fate
reference file to reflect this change.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '443502aed8b814d883825e52e91e4f018955aa66':
dvbsubdec: move shared codepath
Conflicts:
libavcodec/dvbsubdec.c
The merged code is ignored and the factorization redone with
the code that is in FFmpeg.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
In general this commit prepares opt tests to be added to fate.
The commit set some non-zero defaults for test options.
It allows to check if defaults are really set.
Added printing of default values.
Added more cases for testing av_set_options_string
Signed-off-by: Lukasz Marek <lukasz.m.luki2@gmail.com>
* commit '0e1ebfebc8326069732795698a82f3fea0742a54':
4xm: drop unnecessary check
Conflicts:
libavcodec/4xm.c
The check is currently redundant, it is for saftey left in place though
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Using 100-continue ffmpeg will only send data if the server confirms it,
so if there is an error with auth or mounpoint, this allows that it is
properly reported to the user. Else ffmpeg sends data and just quits at
some point without an error message.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
use a default (audio/mpeg for historical reason) if none. Required since Icecast 2.4.1
Not using AVOption default because this breaks content-type warnings (needs to
detect if no type was set by the user)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Use av_mallocz_array instead of iterating and check the returned memory.
Check returned memory and cleanly exit in case of error during the loop.
Avoid a null pointer dereference for invalid data.
CC: libav-stable@libav.org
Bug-Id: CID 29575
vorbis_parser.o is built unconditionally since 5e80fb7ff, and the
unconditionally built parts of it depend on xiph.o.
This fixes builds with --disable-everything.
Signed-off-by: Martin Storsjö <martin@martin.st>
Such strong requirement constraint doesn't allow to use 360p.
Changed to warning when video size is not being multiple of 2.
Signed-off-by: Lukasz Marek <lukasz.m.luki2@gmail.com>
Fixes out of array read
Fixes: asan_heap-oob_2aec5b0_1828_classical_22_16_2_16000_v3c_0_exclusive_0_29.wma
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The min value for colorspace should be zero and not one since the first
valid index into the frame colorspace array is AVCOL_SPC_RGB which is 0.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array read
Fixes: asan_heap-oob_2573085_3783_utvideo_rgba_median.avi
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array read
Fixes: asan_heap-oob_1bf48fa_2513_lag-yuy2.avi
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '28396d17ff1c1493b78d6eece484ffc27ed86d0d':
libfdk-aacdec: Support building with the latest version of fdk-aac
See: b44a242c3d
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The latest fdk-aac code drop (from android 5.0) changed the channel
layout enums (changing the value of existing enum constants), and
renamed the option for downmixing.
The failsafe comparison between ctype and FF_ARRAY_ELEMS(channel_counts)
can trigger warnings (-Wtautological-constant-out-of-range-compare)
when building with the old FDK AAC releases, where it can't be
out of range with the enum values used there.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
The latest fdk-aac code drop (from android 5.0) changed the channel
layout enums (changing the value of existing enum constants), and
renamed the option for downmixing.
The failsafe comparison between ctype and FF_ARRAY_ELEMS(channel_counts)
can trigger warnings (-Wtautological-constant-out-of-range-compare)
when building with the old FDK AAC releases, where it can't be
out of range with the enum values used there.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This allows selecting if the demuxer should consider all streams to be
found after the first PMT and add further streams during decoding or if it rather
should scan all that are within the analyze-duration and other limits
Fixes Ticket3762
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The emulation is unused and causes compilation trouble on systems
where fminf() is defined in <math.h> but missing from libm.
This should fix compilation on Debian powerpcspe.
* commit '8cb7b7b461b52898765b38e3eff68c0ce88347f3':
movenc: Avoid leaking locally allocated data when returning on errors
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This avoids a potential crash if writing a fragmented psp mp4
(which probably is only a hypothetical scenario).
Signed-off-by: Martin Storsjö <martin@martin.st>
new_output_stream creates a codec context with arbitraty picked codec.
Later data is updated, but priv_data are left alone.
There is a bit chance there is a mismatch between codecs.
Signed-off-by: Lukasz Marek <lukasz.m.luki2@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
In matroska_read_seek(), |tracks| is assigned at the begining of the function.
However, functions like matroska_parse_cues() could reallocate the tracks so
that |tracks| can get invalidated.
This CL assigns |tracks| only before we use it so that it won't be invalidated.
BUG=427266
TEST=Test case in associated bug passes now.
Change-Id: I9c7065fe8f4311ca846076281df2282d190ed344
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1d8a0c1b43e58332a3a15c67d4adc161713cade8':
movenc: Allow to request not to use edit lists
Conflicts:
libavformat/movenc.c
See: 537ef8bebf
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '897d5c3a4296f3da80b8699d1487328ca2de8e55':
lavf: Print a warning if failed to avoid negative timestamps when requested
Conflicts:
libavformat/mux.c
See: ec6a5fc6cc
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '4981baf9b803f3c4866b2e97fdadb008c62dc7ad':
avstring: Mark some character handling functions av_const
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Previously we wrote decoding timestamps here, while the specs
say it should be presentation timestamps.
Signed-off-by: Martin Storsjö <martin@martin.st>
When using the new first_trun flag instead of checking the track id,
we don't need to have a special case for the separate_moof flag
any longer.
This simplifies the complicated codepath ever so slightly.
Signed-off-by: Martin Storsjö <martin@martin.st>
In this case, shift tracks to start from zero instead (potentially
stretching the first sample in tracks that start later than the
first one).
Some software does not support edit lists at all, the adobe flash
player seems to be one of these. This results in AV sync errors when
edit lists are used to adjust AV sync.
Some players, such as QuickTime, don't respect the duration for
audio packets, so if an audio track starts later than the video
track and the first audio sample gets a duration longer than the
actual amount of data in it, the result will be out of sync.
Based on patches by Michael Niedermayer.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is the same logic as is invoked on AVFMT_TS_NEGATIVE,
but which can be enabled manually, or can be enabled
in muxers which only need it in certain conditions.
Also allow using the same mechanism to force streams to start
at 0.
Signed-off-by: Martin Storsjö <martin@martin.st>
There's no benefit from using blendps here except on CPUs with AVX, where
it's faster than shufps according to Intel's documentation.
As such, rename the sse4 functions to sse/sse2 and use shufps instead.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
* commit 'ac4a5e3abd8a022ab32245ad527ffc37eabab8b1':
pthreads_frame: Do not leak on failure path
See: 11679e1b90
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5d29efe4b0154ce305d66fed2ac23e5842439256':
mpeg12dec: simplify context duplication
Not merged, theres no point in copying data and afterwards zeroing it
Also zeroing is not correct on its own
Merged-by: Michael Niedermayer <michaelni@gmx.at>
We now use 'pixelformat' for V4L2_PIX_FMT_* (as they do in v4l2
documentation) and 'pix_fmt' for AVPixelFormat.
No functional change in the code.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '05e59135b3539062465b5005b6d46ec0418a5fc4':
nutdec: do not set has_b_frames
Not merged, this change is not correct
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'acc897e6b15776ed438b88ffe330ec48f6b50e48':
lavc: make avpriv_flac_is_extradata_valid() private on the next bump
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c070a8751597e3aa1b443e88464da785d8966b14':
lavc: make avpriv_flac_parse_streaminfo() private on the next bump
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '56dc46a1893251e74be1ad63e54fb38d754bb1fe':
riffenc: do not fall back on AVCodecContext.frame_size for MP3
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '91e8d2eb1f7bf3af949008b106ec1ca037b88b0e':
lavf: use the format context strict_std_compliance instead of the codec one
Conflicts:
libavformat/mux.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2f3fadfbe3c6ad52fad5c614b6067c5401227959':
lavc,lavf: switch to the new vorbis parse API
Conflicts:
libavformat/oggparsevorbis.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5e80fb7ff226f136dbcf3fed00a2966bf8e9bd70':
lavc: add a public API for parsing vorbis packets.
Conflicts:
doc/APIchanges
libavcodec/Makefile
libavcodec/version.h
libavcodec/vorbis_parser.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '6896f95b2483e52e717e2c75a4fd24fcb0e14b67':
vorbis_parser: add an AV prefix to VorbisParseContext
Conflicts:
libavcodec/vorbis_parser.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '8747926':
vorbis_parser: use a dedicated AVClass for logging
Conflicts:
libavcodec/vorbis_parser.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The only parameters needed by the demuxers are the sample rate and sample
count, which can be trivially extracted manually, without resorting to
an avpriv function.
It will not be set unless the codec context is used as the encoding
context, which is discouraged. For MP2, av_get_audio_frame_duration()
will already set the frame size properly. For MP3, set the frame size
explicitly.
Currently, the API takes an external AVCodecContext, which is used only
for extradata and logging. This change will allow to it to work without
an AVCodecContext in the following commits.
Get the heartbeat working when the video has negative timestamps.
Fix trac ticket #4062.
Signed-off-by: Nicolas George <george@nsup.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is a regression, previous code did not require
users to set the profile to use VDPAU.
In addition, ASP is a superset of SP, so there is not
even a good reason to require it.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
It is never an error if this method failed. If rt->live was
explicitly set to 0 (known to be a recorded file), print it
as a warning, otherwise print it as a debug message.
Based on a patch by Michael Niedermayer.
Signed-off-by: Martin Storsjö <martin@martin.st>
Replace "frames to record" with "frames to output". The "to record"
makes it seem like an input option, or that it would capture the frames
instead of outputting them.
Reviewed-by: Timothy Gu <timothygu99@gmail.com>
Signed-off-by: Lou Logan <lou@lrcd.com>
* commit '77ab341c0c6cdf2bd437bb48d429e797d1e60da2':
aacdec: add default case in channel layout
Conflicts:
libavcodec/aacdec.c
Note, the default case is currently unreachable
See: a48b890392
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The application will destroy the underlying hardware handles when
get_format() gets called again. Also this ensures the
deinitialization takes place if the get_format callback returns an
error.
Regression from 1c80c9d7ef.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* commit '930ffd46e1e742674aa7cc1c2450020c63b5015b':
aacsbr: change order of operation to prevent out of array read
Conflicts:
libavcodec/aacsbr.c
See: c2340831b8
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c442190a6bfd8036f6c32b78e1e96ff3b830f8f0':
error_resilience: initialize prev_* variables
Note, these variables are not used without initialization prior
to the change
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This avoids creating unwieldy large packets, which is allowed but
does not seem to be a good idea
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
TDRL is what we used as a replacement of TYER, and, according to
http://id3.org/id3v2.4.0-changes :
TYER - Year
This frame is replaced by the TDRC frame, 'Recording time'
[F:4.2.5].
So change TDRL usages to TDRC.
Fixes ticket #3694
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This way if we by chance run into a valid PMT we have a more complete
set of streams, also do not reset streams in case we run into a worse
PMT
Fixes Ticket4046
alternatively Ticket4046 could be closed as invalid or wontfix as it contains
some PMTs which lack the 2 subtitle streams
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
previously quality could only be set through qscale/global_quality but the scale
was inverted. Using a separate option avoids the confusion from qscale working
backward.
Reviewed-by: Benoit Fouet <benoit.fouet@free.fr>
Reviewed-by: Clément Bœsch <u@pkh.me>
Reviewed-by: Nicolas George <george@nsup.org>
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Replace xcb_event by xcb, as the former is no more used and the latter
is needed on configurations where only xcb is available, and not
libxcb_shm and/or libxcb_xfixes.
Signed-off-by: Benoit Fouet <benoit.fouet@free.fr>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2f221b6a9365aa400061e16266f2d1242f7169f8':
movenc: Define the flag bits using shifts instead of as decimal numbers
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Avoid the creation of files which cannot be successfully decoded by
ffmpeg, for example generated with:
ffmpeg -f lavfi -i sine -af "aselect='not(between(t,100,500))',aresample=min_comp=0.001:min_hard_comp=0.100000" -acodec pcm_s16le -t 1000 -y out_audio.flv
AVOption are checked right after found in config file.
It allows to report exact line in config file.
Options provided more than once are threated as errors.
It also fixes flag options handing.
Flags may occur more than once in config file.
Signed-off-by: Lukasz Marek <lukasz.m.luki2@gmail.com>
Replace atoi with more advanced parsing routine.
Set maximum port value to 65535 (not 65536).
Other checks.
Signed-off-by: Lukasz Marek <lukasz.m.luki2@gmail.com>
So far AVCodecContext was created without codec specified.
This causes internal data to not be initialized to defaults.
This commit postpone context creation until all information is gathered.
Partially fixes#1275
* commit 'aae6b3b918b4133b8cc2d1631196c1d406d0351a':
movenc: Don't write any iso brands in ismv files
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c55d1d382cd41345a79782ace41f9b43f45dca9a':
movenc: Don't write any tfdt atom for ismv files
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '00c67fe1d0bc7c2ce49daac9c80ea39d5a663b73':
movenc: Write a 0 duration in mdhd and tkhd for an empty initial moov
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'cf589faa5b7aed3bb38e08dcd00bd951e69686d1':
movenc: Add a flag for using default-base-is-moof in tfhd atoms
Conflicts:
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The tfdt atom shouldn't be needed in those cases, we already
write tfxd atoms for ismv anyway, which is roughly equivalent.
This avoids having to declare the iso6 brand for ismv files.
Signed-off-by: Martin Storsjö <martin@martin.st>
ISO/IEC 14496-12:2012/Cor 1:2013 is explicit about how this should be
handled. All zeros doesn't mean that the full file has got a zero
duration, only that the track samples described within the initial moov
have got zero duration. An all ones duration means an indeterminate
duration.
Keep writing a duration consisting of all ones for the ISM mode -
older windows media player versions won't play a file if this is
zero. (Newer windows media player versions play either version fine.)
Signed-off-by: Martin Storsjö <martin@martin.st>
Fixes out of array access
Fixes: asan_stack-oob_49b1e5_10_009.mov
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array read
Fixes: asan_heap-oob_fb5c50_19_018.rmvb
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Old versions of libxcb do not provide xcb_shape_rectangles().
The issue can be fixed differently but this small change fixes
some fate platforms and a user reported compilation problem.
Reported and tested by trac user kevmitch.
Fixes ticket #4067.
* commit '600d5ee6b12bad144756b0772319bb04796bc528':
movenc: Signal iso6 in compatible_brands when using tfdt
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a9911a1b2df37ca808e06dc30627215f4ec9a9e4':
doc: Document the omit_tfhd_offset flag to the mp4 muxer
Conflicts:
doc/muxers.texi
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b2b79eca6fae2466a53c5daa163a37e2474364fc':
movenc: Don't check the custom IO flag when using faststart
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '573b1de2d7f1db71030f91ecdded7d0bc071f6b6':
movenc: Don't use track_id to decide which track is the first in a moof
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array access
Fixes: asan_heap-oob_12a55d3_30_029.wmv
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Similarly to the omit_tfhd_offset flag added in e7bf085b, this
avoids writing absolute byte positions to the file, making them
more easily streamable.
This is a new feature from 14496-12:2012, so application support
isn't necessarily too widespread yet (support for it in libav was
added in 20f95f21f in July 2014).
Signed-off-by: Martin Storsjö <martin@martin.st>
The custom IO flag actually never is set for muxers, only for
demuxers, so the check was pointless (unless a user intentionally
would set the flag to signal using custom IO).
Signed-off-by: Martin Storsjö <martin@martin.st>
If one track doesn't have any samples within a moof, no traf/trun
is written for it. When the omit_tfhd_offset flag is set, none
of the tfhd atoms have any base_data_offset set, and the implicit
offset (end of previous track fragment data, or start of the moof
for the first trun) is used.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'f64d7e919eabd427f3e6dd4a1219e448c78deb42':
mtv: improve header check and avoid division by zero
Conflicts:
libavformat/mtv.c
See: 8b9b6332df
Merged-by: Michael Niedermayer <michaelni@gmx.at>
add support for AVC Intra 50 720p and 1080p without SPS/PPS header in mxf and mov demuxers. I got the SPS/PPS tables from libbmx.
Reviewed-by: tomas.hardin@codemill.se
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
__sync built-ins are considered legacy and will be deprecated.
These new memory model aware built-ins have been available since GCC 4.7.0
Use them by default when available except for __atomic_compare_exchange_n(),
which is slower, and is instead implemented as a fallback for when and if gcc
removes the legacy __sync built-ins.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
No need to keep the old symbols around until a major bump since lavd functions
with the avpriv_ prefix were never exposed.
Signed-off-by: James Almer <jamrial@gmail.com>
Reviewed-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Reviewed-by: Stefano Sabatini <stefasab@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes: out of array accesses
Fixes: asan_heap-oob_112c6b3_13_012.avi
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
To keep h264 parsing simple and fast, I used the framesize for selecting the right Panasonic codec label. The framesize is fixed for Panasonic AVC Intra.
This patch only supports AVCI50/100. But in all flavours, i.e. with no SPS/PPS in header.
Reviewed-by: tomas.hardin@codemill.se
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The fieldmatch filter has no problem with mixed telecined and
progressive content but the decimate filter does not detect the
changing framerate and drops progressive frames.
* cehoyos/master:
Mention in the documentation that fieldmatch needs cfr input.
Use v4l2 input format automatically if filename starts with "/dev/video"
Print a warning if a subtitle demuxer changes utf16 to utf8.
Do not set the lame quality if the user didn't request it.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This can be improved in the decimate filter but for the moment
explicitely mentioning that mixed telecined and progressive
content is unsupported is an improvement.
Fixes ticket #3968.
Fixes out of array accesses
Fixes: asan_heap-oob_22c9a39_16_015.mxf
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
FooterPartition offset specified in RIP takes precedence over any value written
in PartitionPacks. This fixes the same issue f06f6da tries to fix without
introducing an extra variable.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Without this patch the demuxer can get stuck in a loop if PreviousPartition
points somewhere where there's no PartitionPack, or if klv_read_packet() syncs
back up to the current partition.
This should fix Ticket3278 properly and unbreak Ticket4040.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This check is redundant with the previous commit but it provides
better error messages and feedback while the previous commit
ensures that var_read_string() doesnt return uninitialized arrays
if it itself is feeded with an invalid size possibly through a
different future codepath.
Fixes: asan_heap-oob_49b1e5_12_011.movie
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array read
Fixes: asan_heap-oob_49b1e5_12_011.movie
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array access
Fixes: asan_heap-oob_11222fb_21_020.dxa
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '4ad1eba011860224831ce0bb3123f6f55716b68a':
lavd: fix building x11grab after a6674d2
no change as the buggy line was not in FFmpeg
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ce91b2eae6ea52fc1a7003566d26db20ca62d745':
vdpau: return MAIN instead of BASELINE for H.264 CBP
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '26ab504ad8d2b23535c9a0ad43bf1fd0e6aa0893':
vdpau/h264: request MAIN rather than BASELINE VDPAU profile for CBP
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The H.264 Constrained Baseline Profile (CBP) is a subset of both the
Main Profile and the Baseline Profile. In principles, a hardware
decoder that supports either of those can decode CBP content. As it
happens, Main is supported by all VDPAU drivers, and Baseline is not.
So favor map CBP to MP for now. Hopefully in the future libvdpau will
offer an explicit choice for CBP.
This fixes bug 757.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Fixes very long but finite loop
Fixes: asan_heap-oob_107866c_42_041.drc
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
should be the raw amount of pixels (for example 3840x1080 for full HD side by
side) and the DisplayWidth/Height in pixels should be the amount of pixels for
one plane (1920x1080 for that full HD stream)."
So, move the aspect ratio check in the mkv_write_stereo_mode() function
and always write the embl when stereo format and/or aspect ration is set.
Also add a few comments to that function.
CC: libav-stable@libav.org
Found-by: Asan Usipov <asan.usipov@gmail.com>
this also uses avpriv_find_start_code(), though no speed change is expected as
the area searched is generally small
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The encoder has its own tables and does not access the idct_factor
member of the DVVideoContext structure.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The coefficients must be in the appropriate zigzag scan order.
Also fix their values at the same time, as they were pretty wrong.
Fixes ticket #2970.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '6b9b42cc5576e1819ad1e29d98940066fd14b2d6':
drawtext: Remove the ifdef for localtime_r
Conflicts:
libavfilter/vf_drawtext.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '82ee7d0dda0fec8cdb670f4e844bf5c2927ad9de':
Use gmtime_r instead of gmtime and localtime_r instead of localtime
Conflicts:
libavformat/mov.c
libavformat/mxfenc.c
libavformat/wtvdec.c
libavutil/parseutils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3f8f1c6ff24ee858eb5b0bf47ef6d4605299a87e':
lavu: Provide fallbacks for gmtime_r and localtime_r
Conflicts:
configure
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9dcf2397219ca796f0fafce2a703770d6fd09920':
lavf: Check the return value of strftime
Conflicts:
libavformat/wtvdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '851ace79a307bea54b44bd6f7ecd3b7861c28ec6':
wtv: Avoid needlessly calling gmtime twice with the same argument
Conflicts:
libavformat/wtvdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
While a standalone implementation is nice, we already depend on
gmtime and gmtime_r in a number of places.
Signed-off-by: Martin Storsjö <martin@martin.st>
If it isn't available in the system, we've got a fallback to
the normal localtime function, so normal code can assume it is
available as long as time_internal.h is included.
Signed-off-by: Martin Storsjö <martin@martin.st>
gmtime isn't thread safe in general. In msvcrt (which lacks gmtime_r),
the buffer used by gmtime is thread specific though.
One call to localtime is left in avconv_opt.c, where thread safety
shouldn't matter (instead of making avconv depend on the libavutil
internal header).
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows writing most code as if they always are is available.
These are ok to use from other libraries even though it's not a
public header, since they only provide an inline declaration, and
doesn't add an actual dependency on lavu internals. (This can be
considered more a build system compatibility fallback than a
libavutil feature.)
Signed-off-by: Martin Storsjö <martin@martin.st>
If the buffer provided to strftime is too small, the buffer contents
are indeterminate - it does not guarantee actually null terminating
the buffer.
Signed-off-by: Martin Storsjö <martin@martin.st>
It is derived from the actual equations of the specs. In
particular, it is closer to the inverse of what the encoder uses.
fate tests accordingly updated.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '0b66fb4505e0bb43de3797f63f3290f0188d67cc':
flac_picture: prevent a possible out of bound write
This is only partly merged, the condition this checks for
is impossible to be true as it would imply avio_read() to
read more than the size passed to it
See: 731f7eaaad
Merged-by: Michael Niedermayer <michaelni@gmx.at>
None of these are likely unless the user is writing a file with two billion
streams or a duration of around two months.
CC: libav-stable@libav.org
Bug-Id: CID 700568 / CID 700569 / CID 700570 /
CID 700571 / CID 700572 / CID 700573
The new function wraps errno so that its value is correctly reported
when other functions overwrite it (eg. in case of logging).
CC: libav-stable@libav.org
Bug-Id: CID 1135748
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Based on ConvertToPlanar() from libutvideo
libutvideo sadly does not seem to support exporting its internal planar buffers
Reviewed-by: Benoit Fouet <benoit.fouet@free.fr>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This has also been independently found and fixed similarly by carl in
f4a3bbf4a3cd375121ea2495817f3e50e831ed48
The 2nd magic check is taken from carls implementation
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '88b32673db39440422a73ec3047d3326c96b4fb2':
avconv: copy stream-level side data when streamcopying
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The quality scale field is only supposed to be present if the fourth bit
is set. In practice, lame always sets it, but other tools might not.
CC:libav-stable@libav.org
The ones left using av_gettime are NTP timestamps (for RTCP,
which is specified to send the actual current realtime clock
in RTCP SR packets), and the NUT muxer timestamper, which is
documented as using wallclock time.
Signed-off-by: Martin Storsjö <martin@martin.st>
Whenever av_gettime() is used to measure relative period of time,
av_gettime_relative() is prefered as it guarantee monotonic time
on supported platforms.
Signed-off-by: Martin Storsjö <martin@martin.st>
Whenever av_gettime() is used to measure relative period of time,
av_gettime_relative() is prefered as it guarantee monotonic time
on supported platforms.
Signed-off-by: Martin Storsjö <martin@martin.st>
Since av_gettime() is used in a number of places where actual
real time clock is required, the monotonic clock introduced in
ebef9f5a5 would have consequences that are hard to handle. Instead
split it into a separate function that can be used in the cases
where only relative time is desired.
On platform where no monotonic clock is available, the difference
between the two av_gettime functions is not clear, and one could
mistakenly use the relative clock where an absolute one is
required. Therefore add an offset, to make it evident that the
time returned from av_gettime_relative never is actual current
real time, even though it is based on av_gettime.
Based on a patch by Olivier Langlois.
Signed-off-by: Martin Storsjö <martin@martin.st>
Previously, AVERROR(EIO) was returned. Now the value is passed from
lower level, thus it is possible to distinguish ECONNREFUSED, ETIMEDOUT,
ENETUNREACH etc.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Previously, AVERROR(EIO) was returned on failure of
http_open_cnx_internal(). Now the value is passed to upper level, thus
it is possible to distinguish ECONNREFUSED, ETIMEDOUT, ENETUNREACH etc.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Handle it inside the __asm__() block.
Fixes fate-vc1_ilaced_twomv when using the gcc-usan toolchain.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
av_match_list() is only used for whitelists, fix it so it works with
multi-named formats like "mov,mp4,m4a,3gp,3g2,mj2"
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This commit doesn't change any existing logic.
It moves ffserver configuration related code to separate file.
It intends to make maintaining easier.
Signed-off-by: Lukasz Marek <lukasz.m.luki2@gmail.com>
The bytes per row is a better indication of it.
Helps resolving ticket #3874 by fixing ffmpeg's encoder and transforming
the issue in a issue with non-compliant decoders. ffmpeg's one is ok,
but unfortunately, many others aren't handling correctly unusual chroma
samplings.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Uses a similar approach as vf_yadif to flush the last frame in idet.
Quick test with 50 frames from vsynth1:
./ffmpeg.old -i fate-suite/ffmpeg-synthetic/vsynth1/%02d.pgm -vf idet -f mp4 -y /dev/null 2>&1 | grep Multi
(gives) [Parsed_idet_0 @ 0x261ebb0] Multi frame detection: TFF:0 BFF:0 Progressive:48 Undetermined:1
./ffmpeg -i fate-suite/ffmpeg-synthetic/vsynth1/%02d.pgm -vf idet -f mp4 -y /dev/null 2>&1 | grep Multi
(gives) [Parsed_idet_0 @ 0x35a0bb0] Multi frame detection: TFF:0 BFF:0 Progressive:49 Undetermined:1
Fate tests have been updated.
(In testing, it seems this filter will also need a subsequent patch for single frame input)
Signed-off-by: Neil Birkbeck <neil.birkbeck@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b69183f65d0f6f4cd7a4e6c0deb57d59b0185aba':
nutenc: check for negative index rather than assert
Conflicts:
libavformat/nutenc.c
Not merged, the assert is correct
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '629b2ed0ac77d7c4bf1aeac5e70cafee5fa0fcae':
flvdec: make sure to check create_stream and report the same error
Conflicts:
libavformat/flvdec.c
See: d7d5b5dfc1
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f22aa6b841dc54fa1dd804303885b1e230a5f629':
flvdec: avoid unitialized use of a struct member
See: 396ddcf22d
Merged-by: Michael Niedermayer <michaelni@gmx.at>
If using MFRA for timestamps, the stream may start from a large offset
and/or have gaps. With this change we calculate the bitrate based on
frames we've seen.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This automatically shifts input timestamps to start at 0 instead of the file's
starting timestamp when using -copyts.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd7f530b0d67fe3996dbfa990a47c865e0d1400a2':
aviobuf: check context before using it
See: 7441d1ec33
Merged-by: Michael Niedermayer <michaelni@gmx.at>
int ff_http_averror(int status_code, int default_averror)
This helper function returns AVERROR_ value from 3-digit HTTP status
code.
Second argument, default_averror, is used if no specific AVERROR_ is
available. It is introduced because in different places of code
different return codes are used - -1, AVERROR(EIO), AVERROR_INVALIDDATA.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
For URLs "rtmp://server[:port]/foo" determine what `foo` refers to. If
application name has been defined by the user assume that `foo` is a
playpath, otherwise assume application name.
Signed-off-by: Kacper Michajłow <kasper93@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The colon after the localtime function call needs an additional layer of
escaping or else everything until the next colon is treated as a
fontfile.
Signed-off-by: Simon Thelen <ffmpeg-dev@c-14.de>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This allows restricting demuxers to a list of needed ones for improved security
Note, some demuxers themselfs open other demuxers, these are only restricted if
AVOptions are forwarded to them. Please check that your code does that.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is similar to 20a5956b8d
The difference this change makes affects only rather few files
but looks like:
Stream #0:1: Video: mjpeg, 90k tbr, 90k tbn, 90k tbc
vs.
Stream #0:1: Video: mjpeg, none(bt470bg/unknown/unknown), 90k tbr, 90k tbn, 90k tbc
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b7c77912b62163b3b46ce93fe42fff3c83604c82':
oss_audio: use a macro to simplify ioctl() error checking
Conflicts:
libavdevice/oss_audio.c
See: 69c7aad494
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '963f76144897d3f7684d82ec21e51dd50ea1106e':
avresample: Make sure the even check does not overflow
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '088eca28164c8cd3b72b0c3d3f9e3fe5ee5cb28f':
avresample: prevent theoretical division by zero
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f401792595dd7760f531e8a3bd2336e9033bd45a':
vf_drawtext: Do not leak the mmapped textfile
Conflicts:
libavfilter/vf_drawtext.c
See: 6956b048d8
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This fixes the ratecontrol code with snow
adding FF_MPV_COMMON_OPTS is needed as the generic rate control options
are currently in the (unrelated) MpegEncContext
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '530c1441fd1426b6a4bb33485ff3226e1ae0ad45':
lavc: make lmax/lmin into private options of mpegvideo encoders
Conflicts:
libavcodec/avcodec.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Casting the left-most byte to unsigned avoids an undefined
result of the shift by 24 if bit 7 is set.
yuvPlanartouyvy_c and yuvPlanartoyuy2_c are affected.
CC: libav-stable@libav.org
Bug-Id: CID 732281 / CID 732282
* commit '15ec053c4c0b198a2e93eb8e60c8f41e091e0c40':
lavc: make border_masking into private options of mpegvideo encoders
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '66a68ddd1ac376b24db8695058bc8fc28f5bada6':
lavc: make rc_buffer_aggressivity/rc_initial_cplx into private options of mpegvideo encoders
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a75c2eb25a62105c09b48521aef429dc8a231637':
lavc: make rc_eq into private options of mpegvideo encoders
Conflicts:
libavcodec/options_table.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '946f95354ba76ef73c9b66889d86ab5fba4fb486':
lavc: make rc_qmod_* into private options of mpegvideo encoders
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a6e4ce9fd50897dc6d9c2ada4b6b8090de7de5bf':
lavc: make rc_qsquish a private option of mpegvideo encoders
Conflicts:
libavcodec/avcodec.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Currently, this option is accessed through AVCodecContext.mb_threshold,
which originally controlled reusing MB data when transcoding mpeg to
mpeg. Since the libvpx meaning is completely different from the original
mpegvideo meaning, it is better to use a separate private option for
this.
The rounding used in the PTS calculations in filter_frame() does
not actually match the number of samples output by the resampler.
This leads to off-by-1 errors in the timestamps indicating gaps and
underruns, even when the input timestamps are all contiguous.
Bug-Id: 753
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Some RTMP commands need the most recent timestamp as their parameter, so
keep track of it. This must be the most recent one and not e.g. the max
received timestamp as it can decrease again through seeking.
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes the abnormally high ts overhead in the files produced by the
HLS and segments muxers. See https://trac.ffmpeg.org/ticket/2857 . For
example makes it much more likely that it can produces streams that fit
under the 64kb App store limit.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '66e9f839536238945fbfe9d2041b6891cb150e45':
libfdk-aacdec: Enable Dynamic Range Control Metadata Support
Conflicts:
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Some encoders do not use syncsafe sizes in v2.4 id3 tags. Check the next
tag to try to choose between the two.
Fixes ticket #4003
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '324b23dde1bc8638959eb32419c95a93906db272':
rtmpproto: Add function to read a number response
Merged-by: Michael Niedermayer <michaelni@gmx.at>
For streams which contain DRC metadata, the FDK decoder is able to
control rendering of the decoded output. The rendering parameters
are detailed in fdk_aac_dec_options [].
The default behavior is left up to the decoder.
Signed-off-by: Martin Storsjö <martin@martin.st>
The FDK decoder is capable of producing mono and stereo downmix from
multichannel streams. These streams may contain metadata that control
the downmix process. The decoder requires an Ancillary Buffer in order to
correctly apply downmix in streams containing downmix Metadata. The
decoder does not have an API interface to inform of the presence of
Metadata in the stream, and therefore the Ancillary Buffer is always
allocated whenever a downmix is requested.
When downmixing multichannel streams, the decoder requires the output
buffer in aacDecoder_DecodeFrame call to be of fixed size in order to
hold the actual number of channels contained in the stream. For example,
for a 5.1ch to stereo downmix, the decoder requires that the output buffer
is allocated for 6 channels, regardless of the fact that the output is in
fact two channels.
Due to this requirement, the output buffer is allocated for the maximum
output buffer size in case a downmix is requested (and also during
decoder init). When a downmix is requested, the buffer used for output
during init will also be used for the entire duration the decoder is open.
Otherwise, the initial decoder output buffer is freed and the decoder
decodes straight into the output AVFrame.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'aeb23fc4549a25ef32ff085d2a76227f90caf403':
avprobe: Remove a pointless check
Conflicts:
avprobe.c
No change as the code does not exist in ffprobe
Merged-by: Michael Niedermayer <michaelni@gmx.at>
In (non-live) streams with no metadata, the duration of a stream can
be retrieved by calling the RTMP function getStreamLength with the
playpath. The server will return a positive duration upon the request if
the duration is known, otherwise either no response or a duration of 0
will be returned.
Signed-off-by: Martin Storsjö <martin@martin.st>
Packets that contain a number as a result to a rtmp function call are
structured the same way (String, Number, Null, Number). This new method
also includes more bounds checks to better handle packets that are not
structured as expected.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '979932378ae3fbf452e312eb759cc7ce175f78de':
ismindex: use tfhd default duration if no sample duration
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Add the judement after create a new program to avoid segment fault.
Signed-off-by: Di Wu <di1028.wu@samsung.com>
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ced7238cd01cc2199acf9225305628641a27c1d7':
rtpdec_hevc: Use av_realloc instead of av_malloc+memcpy
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '74b02377980321934e33969c84733ace7e9f4eeb':
mov: Correctly check the color transfer characteristics range
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1ac5a29b2e5ddeae068deb9d6e0e803a91941d4d':
imc: fix order of operations in coefficients read
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e5cfc8fdad901c9487fe896421972852f38bcf5':
sdp: Provide out of bound parameter sets for HEVC if extradata is set
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9b7f932ee568cadfc0f556a061fcc00cb63f9780':
rtpdec_hevc: Parse out of band vps/sps/pps/sei from fmtp lines
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2d6e58497e76836604364b037df9b00ba3d75b69':
lavf: switch to AVCodecContext.framerate for demuxing
Conflicts:
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
They are not just inverses of each other.
This should restore behavior to before the introduction of framerate
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
They are not just inverses of each other.
This should restore behavior to before the introduction of framerate
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
They are not just inverses of each other.
This should restore behavior to before the introduction of framerate
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7ea1b3472a61de4aa4d41b571e99418e4997ad41':
lavc: deprecate the use of AVCodecContext.time_base for decoding
Conflicts:
libavcodec/avcodec.h
libavcodec/h264.c
libavcodec/mpegvideo_parser.c
libavcodec/utils.c
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c1724623ce0433c6a9ee72133b1fd4db75ec7193':
vdpau: have av_vdpau_bind_context() fail on unsupported flag
Merged-by: Michael Niedermayer <michaelni@gmx.at>
When decoding, this field holds the inverse of the framerate that can be
written in the headers for some codecs. Using a field called 'time_base'
for this is very misleading, as there are no timestamps associated with
it. Furthermore, this field is used for a very different purpose during
encoding.
Add a new field, called 'framerate', to replace the use of time_base for
decoding.
Decoding acceleration may work even if the codec level is higher than
the stated limit of the VDPAU driver. Or the problem may be considered
acceptable by the user. This flag allows skipping the codec level
capability checks and proceed with decoding.
Applications should obviously not set this flag by default, but only if
the user explicitly requested this behavior (and presumably knows how
to turn it back off if it fails).
Signed-off-by: Anton Khirnov <anton@khirnov.net>
These allow getting the absolute start timestamp of a fragment
without reading preceding timestamps. This fixes sync between
tracks if starting from fragments in different streams that don't
align exactly.
This also is a prerequisite for producing DASH content.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '2df0c32ea12ddfa72ba88309812bfb13b674130f':
lavc: use a separate field for exporting audio encoder padding
Conflicts:
libavcodec/audio_frame_queue.c
libavcodec/avcodec.h
libavcodec/libvorbisenc.c
libavcodec/utils.c
libavcodec/version.h
libavcodec/wmaenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1f29e5d7a2b0950f3b6820896e97e2c02e6a10a9':
h263dec: call get_format after setting resolution and profile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Currently, the amount of padding inserted at the beginning by some audio
encoders, is exported through AVCodecContext.delay. However
- the term 'delay' is heavily overloaded and can have multiple different
meanings even in the case of audio encoding.
- this field has entirely different meanings, depending on whether the
codec context is used for encoding or decoding (and has yet another
different meaning for video), preventing generic handling of the codec
context.
Therefore, add a new field -- AVCodecContext.initial_padding. It could
conceivably be used for decoding as well at a later point.
E-AC-3 samples should contain 6 audio blocks, so concatenate syncframes
in order to achieve this.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This introduces a new option to the mov demuxer: -use_mfra_for
(pts|dts). When it's given and moofs and a MFRA are present, the MFRA's
TFRAs are read for fragment start times.
Unfortunately some programs that produce fragmented mp4s use the TFRA
time field for dts and some for pts. There is no realistic way to detect
which is the case, hence the responsibility is punted onto the user.
This also means that no behavioural change is enabled by default - you
must pass either dts or pts for anything to happen.
Without this change, timestamps for some discontinuous fragmented mp4 are
wrong, and cause audio/video desync and are not usable for generating
HLS.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e44ee1eb8db7393e9d43207c2e1812720e292e6d':
movenc: Simplify code by using an existing local pointer
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'dad12ce452a9d69c0d9d53c375003947d5f1b02e':
movenc: Print a warning for an unhandled case of nonzero start dts with empty_moov
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'dbb472cb2f2f799295a12b4922a6a8be2cccfdee':
movenc: Write edit lists for fragmented files as well, if necessary
Conflicts:
libavformat/movenc.c
The default for writing EDTS for fragmented mp4 is left at disabled
this can be overridden via command line with -use_editlist
but EDTS + fragments still does not fully work, which is why it is
left disabled by default
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '95ee4e2ce774e0339632d067161596bf3dadfc72':
movenc: Add some comments explaining subtle details in writing the edit lists
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '72f801619a1ae91969fee9a7d72519422433c998':
movenc: Adjust edit lists to trim out parts of tracks with negative pts
Conflicts:
libavformat/movenc.c
See: 66b45d8f7a
See: 14fd34d73b
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '8bef43388132b53f59a6e90add18900a3bb4cc60':
smoothstreamingenc: Simplify code by removing a redundant variable
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Icecast uses HTTP 1.0 while Libav uses HTTP 1.1 and enables by
default chunked post.
Icecast actually forwards the HTTP chunk headers to the listener
as part of the media stream (without the chunk encoding HTTP headers)
causing the players to lose sync.
Disabling the option is enough to feed icecast properly.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This is necessary to get the right timestamp offset for content
that starts with dts != 0.
This currently only helps when writing fragmented files with a non-empty
moov atom. When writing an empty moov atom, we don't have any packets
yet, so we don't know the starting dts for the tracks.
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes sure that audio preroll for e.g. AAC is signaled correctly.
Previously we only wrote the edit list correctly if we had negative
dts but started with pts == 0 (e.g. for video with B-frames).
Signed-off-by: Martin Storsjö <martin@martin.st>
move the code after the existing NULL check
Fixes: signal_sigsegv_844d59_10_signal_sigsegv_a17bb7_366_mpegts_mpeg2video_mp2_dvbsub_topfield.rec
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'bd239c9a2e151c0aeeb653a571f130aae7320894':
lavf: Don't drop both pts and dts if timestamps are invalid
Conflicts:
libavformat/utils.c
tests/ref/fate/vc1-ism
See: cd6851c5ef
Merged-by: Michael Niedermayer <michaelni@gmx.at>
In these cases, only drop dts. Because if we drop both we have no
timestamps at all for some files.
This improves playback of HLS streams from GoPro cameras.
Signed-off-by: Martin Storsjö <martin@martin.st>
Fixes segfault when using sendcmd with drawtext.
Since LIBAVFILTER_VERSION_MAJOR 5 FF_API_DRAWTEXT_OLD_TIMELINE
evaluates to 0.
Signed-off-by: Karl Kiniger <karl.kiniger@med.ge.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Makes ffmpeg abort instead of continuing when stop_time <= start_time.
Closes ticket #4015.
Signed-off-by: Simon Thelen <ffmpeg-dev@c-14.de>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Support only one independent substream right now, and only syncframes
containing 6 blocks.
Fixes part of ticket #3074
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Trying to write to a stream id larger the the maximum requested is
a programming error, still there is no reason to leave a
reachable abort() in the codebase.
CC: libav-stable@libav.org
In vp9_decode_frame function, ff_thread_finish_setup is not called
when refreshctx is equal to 0, and the next decoding thread can not
start work until the cunrrent frame has been decoded completely. So
ff_thread_finish_setup needs to be called to enable Multi-thread
decoding in this condition.
Signed-off-by: Di Wu <di1028.wu@samsung.com>
Signed-off-by: Reynaldo H. Verdejo Pinochet <reynaldo@osg.samsung.com>
* commit 'b7c3bfd5eb3153f7de8039f96e7911b2a1d46cae':
w32pthreads: use the condition variable API directly when targeting newer versions of Windows
Conflicts:
compat/w32pthreads.h
See: 8c6992bf0c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '73ea3ffcd55b0b1d23ba4769d65996a8d58ffa11':
w32pthreads: use the CONDITION_VARIABLE typedef if available
Conflicts:
compat/w32pthreads.h
configure
See: 0c06949314
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Wrap the function calls in a similar fashion to how it's being done
with the critical section API.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
This silences warnings about passing arguments from incompatible pointer type
when targeting Windows Vista or newer.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
Fix basename computation code to allow just file names without any
directories in the path.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
On init failure, let's just free it, so next time it will be recreated from
start.
Also fixes Coverity CID 1241515.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Marton Balint <cus@passwd.hu>
Wrap the function calls in a similar fashion to how it's being done
with the critical section API.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
In dahsmode Matroska is not writing the first Cluster for every
audio stream in the Cues element.
Signed-off-by: Frank Galligan <frankgalligan@gmail.com>
Reviewed-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This silences warnings about passing arguments from incompatible pointer type
when targeting Windows Vista or newer.
Tested-by: Matt Oliver <protogonoi@gmail.com>
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
syncframes in E-AC-3 can be combined to provide 6 audio blocks per
sample, thus requiring parsing for proper decoding.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Reads the fragment duration from the trun sample data, rather than
assuming that there are no gaps. Creates much better playlists for our
inputs.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'eddf95283fbba1b469b76e7518bc3941f671b193':
vp9: initialize color space and range properties
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '65875a8b3b079752da25a61ec188d2e3d90a569f':
vp8: initialize color space and range properties
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9d5fed6dc4cccb0689f694112f5026988bebc472':
avcodec: fix descriptions on color transfer options
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9f3a70c44224ed92d91df65bb9470a2649e7d019':
dump: print the original coded dimensions when available
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '41e86146e7240f9d42e8cdb86a94bb3eb2bbe15f':
dump: print detailed color space information
full color triplets are only printed if they are not all equal, otherwise
they are printed as before
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '20a5956b8daeee4cb59d6fa00ec809b02c04d7f8':
dump: split audio and video probing on multiple lines
Conflicts:
libavcodec/utils.c
libavformat/dump.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '04ccd584a70fad4ebb29ca340d704970ff313cbc':
pixfmt: mark further reserved values
Conflicts:
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c732c62cee43f651775af5547cff99d418248542':
doc: expand description for some color properties
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a2c00d22e71d13b72828147be86aa9e961c6cae6':
avprobe: print color properties for show_streams
Conflicts:
avprobe.c
Not merged as this code does not build and is incomplete, some parts only
appear in later commits.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '147f2e91eece6b9021ff5b7f8a3b5ce053566659':
avcodec: make sure color_range is properly initialized
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7ae9791b641d1183910b6e7faca23f7ae08f8579':
avformat: bump version after mime_type change
Conflicts:
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b15b06ebf582ae81e47d236524c9ad6e10c8a0a7':
avformat: use const char* instead of uint8_t* for AVProbeData.mime_type
Conflicts:
libavformat/format.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This makes the field consistent with AVInputFormat.mime_type and the
argument type of av_match_name.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This makes the addition of arch optimized functions easier.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Adds output of chroma sub-sampling information to
ffprobe -show_pixel_formats option.
Note: This patch just prints the "raw" log2_charoma_w/h values instead
of the previously suggested mapping into a chroma sub-sampling pattern
string like "4:2:2".
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Adds option -show_pixel_formats to ffprobe which lists all
available pixel formats with some details.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9a03c2323593173a201cb75edd1b49887cf811ed':
h263dec: Force padding bug workaround for H.263.
This is not merged as it breaks a good part of the error concealment/resilience for H.263
Also, messenger.h263 plays fine in ffmpeg.
If anyone has any other h263 files that do not work, please open an issue on trak or
mail me!
See: d225b0f7aa
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd208d1eba3799c58fd6d3602d31de3e686f14aec':
hevc_mvs: make sure to always initialize the temporal MV fully
Conflicts:
libavcodec/hevc_mvs.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '79a60c8e779242b5ba4c531b2c706c871e8e6420':
hevc_mvs: initialize the temporal MV in case of missing ref
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '28816050e47b6dba430a52e429d21a864cffda8e':
lavf: Set the stream time base hint properly for chained muxers
Conflicts:
libavformat/segment.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
By using ff_avc_write_annexb_extradata instead of the h264_mp4toannexb
BSF, the code for doing the conversion itself is kept much shorter,
there's less state to restore at the end, we don't risk leaving the
AVCodecContext in an inconsistent state if returning early due to
errors, etc.
Also add a missing free if the base64 encoding fails.
Signed-off-by: Martin Storsjö <martin@martin.st>
The register function now specifies that the user callback should
leave things in the same state that it found them on failure but
that failure to destroy is ignored by the library. The register
function is now explicit about its behavior on failure
(it unregisters the previous callback and destroys all mutex).
Signed-off-by: Manfred Georg <mgeorg@google.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* commit 'bef067f88c74190cdf7e76d12f02e12e069974aa':
vdpau: check video surface and decoder capabilities
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ce083282f0a8b7d63c4047c30b7bac498f9806dd':
vdpau: common support for managing the VdpDecoder in avcodec
Conflicts:
libavcodec/vdpau.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This function provides an explicit VDPAU device and VDPAU driver to
libavcodec, so that the application is relieved from codec specifics
and VdpDevice life cycle management.
A stub flags parameter is added for future extension. For instance, it
could be used to ignore codec level capabilities (if someone feels
dangerous).
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This is necessary to recreate the decoder with the correct parameters,
as not all codecs invoke get_format() in this case.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Fixes regression from Ticket3962
This basically favors the first global header while since 34751f8313
it was the last. If this heuristic turns out worse, do not hesitate to revert this and
reopen 3962 as a feature request for multiple STSD
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
it should not be possible to be larger as its stored as 8bit value
but we would be overwriting a stack buffer if it is ...
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Using the not so new init and uninit callbacks, avcodec can now take
care of creating and destroying the VDPAU decoder instance.
The application is still responsible for creating the VDPAU device
and allocating video surfaces - this is necessary to keep video
surfaces on the GPU all the way to the output. But the application
will no longer needs to care about any codec-specific aspects.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* commit '5b9c817dc7577b6d44acc94d73b9c77c52cda489':
x11grab: Check XFixesGetCursorImage return value
Conflicts:
libavdevice/x11grab.c
See: a65c0a3fe8
The warning with adjusted text is kept from a65c0a3fe8
but drawing the cursor is not disabled in case XFixesGetCursorImage() fails
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '68211c70afcfd4d675029cc85fba7dee8de53bdf':
vc1: Do not assume seek happens after decoding
See: 6801eb0a09
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The paint_mouse_pointer() code uses XFixes to retrieve the cursor
coordinates, but XFixes gives no information about which screen the
pointer is on; this results in always drawing the cursor on the
captured screen even if the mouse pointer was on another screen.
For example, when capturing from screen 1 (i.e. -f x11grab -i ":0.1")
the cursor was being drawn in the captured image even when the mouse
pointer was actually on screen 0, which is wrong and visually confusing.
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Fixes out of array access
Fixes: asan_heap-oob_4da4f3_7_asan_heap-oob_4da4f3_173_Xmen_avc_500.vp6
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
cherry picked from commit df8ebe304df453f26c28ff8f11d607f49b90a4c2
Fixes out of array access
Fixes: asan_stack-oob_1046454_9_asan_stack-oob_15a9e7c_170_WP_MAIN10_B_Toshiba_3.bit
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array read
Fixes: asan_heap-oob_e476fc_2_asan_heap-oob_1333ec6_61_CAMACI3_Sony_C.jsv
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes use of uninitialized memory
Fixes: signal_sigsegv_504fb0_10_signal_sigsegv_504fb0_343_mewmew_ssa.avi
Found-by: Mateusz j00ru Jurczyk and Gynvael Coldwind
Fixes out of array read
Fixes: signal_sigsegv_844d59_10_signal_sigsegv_a17bb7_366_mpegts_mpeg2video_mp2_dvbsub_topfield.rec
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This avoids out of array accesses
Fixes: asan_heap-uaf_21f42e4_9_asan_heap-uaf_21f42e4_278_gl2.mov
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array access
Fixes: asan_heap-oob_1685bf0_5_asan_heap-oob_1f35116_430_smc.mov
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array access
Fixes: asan_heap-oob_153760f_4_asan_heap-oob_1d7a4cf_164_VWbig6.avi
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
also change it to a loop
Fixes out of array access
Fixes: asan_heap-oob_ca5410_8_asan_heap-oob_ca5410_97_ID_LSD_Size_Less_Then_Data_Inter_3.gif
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array access
Fixes: asan_heap-oob_4da0ba_6_asan_heap-oob_4da0ba_241_cvid_crash.avi
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The -hls_allow_cache parameter enables explicitly setting the
EXT-X-ALLOW-CACHE tag in the manifest file. That tag indicates
whether the client MAY or MUST NOT cache downloaded media
segments for later replay.
Valid values are 1 (=YES) or 0 (=NO) and the EXT-X-ALLOW-CACHE
will not show in the manifest for other values (or if
-hls_allow_cache is not used.
Signed-off-by: Martin Storsjö <martin@martin.st>
Fixes out of array accesses
Fixes: asan_heap-oob_14dbfcf_4_asan_heap-oob_1ce5767_179_add_method_small.png
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes pixel format selection
Fixes out of array accesses
Fixes: asan_heap-oob_1766029_6_asan_heap-oob_20aa045_332_cov_1823216757_m2-d1d366d7965db766c19a66c7a2ccbb6b.tif
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array access
Fixes: asan_heap-oob_4da4f3_8_asan_heap-oob_4da4f3_419_scene1a.mm
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array accesses
Fixes: asan_heap-oob_12304aa_8_asan_heap-oob_4da4f3_300_intro.jv
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array accesses
Fixes: asan_heap-oob_16668e9_2_asan_heap-oob_16668e9_346_miss_congeniality_pegasus_mjpg.avi
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
previously it could have been by 1 too large
Fixes out of array access
Fixes: asan_heap-oob_12240f5_1_asan_heap-oob_12240f5_448_t8c1e3.jls
Fixes: asan_heap-oob_12240f5_1_asan_heap-oob_12240f5_448_t8nde0.jls
Fixes: asan_heap-oob_12240fa_1_asan_heap-oob_12240fa_448_t16e3.jls
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The register function now specifies that the user callback should
leave things in the same state that it found them on failure but
that failure to destroy is ignored by the library. The register
function is now explicit about its behavior on failure
(it unregisters the previous callback and destroys all mutex).
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Add CODEC_FLAG2_SKIP_MANUAL (exposed as "skip_manual"), which makes
the decoder export sample skip information via side data, instead
of applying it automatically. The format of the side data is the
same as AV_PKT_DATA_SKIP_SAMPLES, but since AVPacket and AVFrame
side data constants overlap, AV_FRAME_DATA_SKIP_SAMPLES needs to
be introduced.
This is useful for applications which want to do the timestamp
calculations manually, or which actually want to retrieve the
padding.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Width, Height and Sample Rate should be in the AdaptationSet tag
only if all the contained representations have the same width,
height and sampling rate. Otherwise they should go into the
Representation tag. This patch adds this functionality and a fate
test for the same.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This makes the addition of arch optimized functions easier.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
* commit 'd10d1b86550d254bd1e746ed613bf6885978879c':
libx265: enable psnr reporting when requested by the user
See: 3956b12fde
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Fix incorrect bandwidth computation in some cases. When the cue end
descriptor is null (i.e.) start_time_ns == -1, existing bandwidth
computed (if any) should be returned rather than returning 0.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fix an incorrect hard code in cues_end computation. Updating the fate
test reference files related to the fix as well. The earlier computation
was clearly wrong as the cues_end field was greater than the file size
itself in some cases.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
~15% faster.
Also add an mmxext version that takes advantage of the new code, and
build it alongside with the mmx version only on x86_32.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
A badly behaving user provided mutex manager (such as that in OpenCV) may not reset the mutex to NULL on destruction. This can cause a problem for a later mutex manager (which may assert that the mutex is NULL before creating).
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
avio_flush() did nothing useful for read streams. Fix it to behave as
expected, and discard the currently read buffer properly.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
When only SPS or PPS is present in the stream, copy the missing one from
AVCC before insertion to the output stream.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
If we setup AVIO interrupt callback and it will be returns 1 on socket
timeouts and we try to connect to non-existing streams on some servers
(like nginx-rtmp) we got FD leak.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2cd7c99498b1bcb450c328459cf85a686ce83456':
h264: reset ret to avoid propagating minor failures
See: 47048aa30b
Merged-by: Michael Niedermayer <michaelni@gmx.at>
When AVFMT_FLAG_NOBUFFER is set, the packets are not added to the
AVFormatContext packet list, so they need to be freed when they are
no longer needed.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This also un-does the fate changes from a52f443714,
leaving this fix without even small differences in the output, that is
a sample for which this makes a vissible difference is very welcome
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes CID1194380
There are no vissible differences in the changed fate samples. Only
a tiny number of pixels change by tiny amounts in the frames i checked
If someone has a file that shows a vissible difference, please post it.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The -hls_allow_cache parameter enables explicitly setting the
EXT-X-ALLOW-CACHE tag in the manifest file. That tag indicates
whether the client MAY or MUST NOT cache downloaded media
segments for later replay.
Valid values are 1 (=YES) or 0 (=NO) and the EXT-X-ALLOW-CACHE
will not show in the manifest for other values (or if
-hls_allow_cache is not used.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '551746680462538bb5ad7adf55fb1248190428ec':
configure: Provide a safe default for unknonw libcs
Conflicts:
configure
This is not merged as it does not work with musl here, while
our previous solution does.
See: 170e2fd7c3
Merged-by: Michael Niedermayer <michaelni@gmx.at>
After this the order from the original file is stored through readorder
when doing ffmpeg -i input.ass -c copy output.mkv.
And now that the ASS muxer honors the ReadOrder, extracting the ass back
(without transcoding) restores the original order.
This is more robust and should avoid false positives in coverity
That is if the type is ever mixed up, after this patch that would
just be a null pointer dereference instead of a random possibly
out of array access
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9d2cee52d37c7340f85a5d41110282aac03e6855':
configure: Assume a standard-compliant default libc
See: 170e2fd7c3
Note, the change is not merged to avoid breaking netbsd and others.
once the netbsd (and any other breakages are dealt with the
else based solution could be used and 170e2fd7c3
could then be reverted)
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '6cfbe1de5ac6c57c41459626f7ac32841d63ace8':
avconv: Use only audio and video to guess discontinuities
Conflicts:
ffmpeg.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '883e98bc25755327565d8ae0f565a6c886f24816':
probe: Bump the score for mime type matching
Conflicts:
libavformat/format.c
See: bcac0f4010
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd995f0a1550c9148140eab34c7d770e90925c004':
log: Unbreak no-tty support on 256color terminals
Conflicts:
libavutil/log.c
No change, FFmpeg is not affected by this bug
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'cc4992aaf3dbb0af88d9727983d75636baf1f8cc':
ac3enc: allow Dolby Pro Logic IIz as the Dolby Surround EX mode.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '4c2fd4b262347273afe97865ba451a1abde43ae6':
ac3enc: allow Dolby Pro Logic II as a preferred downmix mode.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b39ebcddd47daf37659796aaa7d068668086507a':
fate: Add VC-1 interlaced twomv test
Note, this test is not free of artifacts on both sides of the merge
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a97328afef0ccebfc8c3d9f9fdb8e93cbf1058ab':
vc1: Use logical instead of bitwise or for twomv
See: 1e2ab98460
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b5fe13448b13bfdd48a75b7e12387e11e3526d7c':
vc1: Use logical instead of bitwise or for coded_inter
Merged-by: Michael Niedermayer <michaelni@gmx.at>
It may be used by ff_add_pixels_clamped_sse2().
Should fix fate-cavs failures on some systems.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
Prevents a segfault if a stream featuring a known but unavailable codec (like external lib codec) should be opened.
Bug found by: Jonas Geistert <j.geistert@yahoo.de>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '28f5cd312c9da9072108edf8b7685d009374ea96':
fate: Switch ra4-288 test from framecrc() to pcm()
Conflicts:
tests/fate/real.mak
The test is kept disabled as it still does not pass on x86-64 due to float
rounding
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd07ddc93e29a4fdf12cd426953a7ecd5abe5e36d':
avcodec: Fix a doxy comment to refer to the right function
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Also add sse2 versions for both.
put_pixels_clamped port and sse2 version originally written by Timothy Gu.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
Same behavior as in simple_idct.
This way the best optimized versions available will be used instead.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
* commit 'c463dfc7e49929a9891884312b23b27d14729c51':
rtpdec_hevc: Drop a duplicated, nonstandard entry
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The RFC spec draft only specifies the "H265" name - there is no
specification saying how to interpret "HEVC" (if such a packet
format is specified it could be an entirely different format).
Since this is a very new standard (still a draft), there is little
need for compatibility with existing, broken implementations. Therefore
remove the extra alias, to avoid the risk of encouraging incorrect
usage.
Intentionally keeping the ff_hevc_dynamic_handler name for the
handler, to use "hevc" consistently as name for the codec instead
of "h265" within the library internals as long as there only is one
single variant in actual use.
Signed-off-by: Martin Storsjö <martin@martin.st>
This may make fate failures where only the console output is available
easier to analyze
Suggested-by: Andreas Cadhalpun
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
In some cases resize events can happen even during fullscreen, so let's pass
the proper flag to SDL_SetVideoMode.
Fixes ticket #3964.
Reported-by: Jeff Dwork <jeff@reggie.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Roughly 25% faster MC than ssse3 for blocksizes 32 and 64.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Considering the palette is located at the end of extradata may be flawed
when the extradata contains the palette followed by the BottomUp field.
When the BottomUp field is present, exclude it from the palette.
Fixes part of ticket #1304
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Some C libraries, eg glibc, uclibc, and musl, uses feature test macros
to expose definitions conforming to the standards ISO C, POSIX and
extensions. According to which feature test macros are defined by the
user or the compiler, a header file, eg <features.h>, used by these
libraries internally defines various other macros.
glibc and uclibc also defines release test macros, eg __GLIBC__ and
__UCLIBC__ in <features.h>. musl does not have (and does not want) a
macro __MUSL__. Therefore it is not possible to check for the musl
library.
However, building FFmpeg with musl needs the feature test macro
_XOPEN_SOURCE=600 to be defined.
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Before this commit, the code was muxing up to the 2nd line after
"[Events]" (assuming it to be the "Format:" line). The remaining are
generally "Comment:" directives which can stay in that place. mkvextract
behaves that way so it seems there is no reason for that extra
complexity.
Consider a file created with something like:
cat file1.mp3 file2.mp3 > result.mp3
Then if file2.mp3 has gapless information, result.mp3 would stop playing
something in the middle. This happens because the gapless info directs
the decoder to discard all samples after a certain position. To make
matters worse, the gapless info of file2.mp3 will be used when playing
the file1.mp3 part, because the gapless info is located at the end of
the file.
While handling concatenated gapless files correctly would be insane and
a lot of effort (especially without scanning the whole file on opening),
it's easy to prevent at least early EOF. Playback will happen to work,
even if it's slightly broken.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The fourth substream is being discarded, since its not raw audio data,
but an encoded Atmos stream which needs a specialized decoder.
Fixes decoding of the true hd stream from Transformers\ -\ Age\ of\ Extinction\ 2014\ 1080P-003.mkv
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The extra bits have already been masked, so this was not doing anything.
Noticed-by: Justin Ruggles
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The code already had skipping of initial padding, but discarding
trailing frame padding was missing.
This is somewhat questionable, because it will make the decoder discard
any data after the declared file size in the LAME header. But note that
skipping full frames at the end of the stream is required. Encoders
actually create such files.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Also add mmxext versions of vsad8 and vsad_intra8, and sse2 versions of
vsad16 and vsad_intra16.
Since vsad8 and vsad16 are not bitexact, they are accordingly marked as
approximate.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
As suggested, this just adds _DEFAULT_SOURCE while preserving
_SVID_SOURCE for whatever old systems still need it.
Signed-off-by: Daniel Bomar <dbdaniel42@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
See https://code.google.com/p/webp/issues/detail?id=206
for a description of the problem/fix.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This patch makes the decoder follow the recommendation of the spec.
There is some disagreement (see "[FFmpeg-devel] [PATCH]: libavcodec/webp")
about what would be best to be written in the spec, so in case the spec
is changed again, this potentially would need to be amended or reverted
in the latest git commits of libilbc developers removed WebRtc_xxx typedefs
This commit uses int types instead,
it's safe to apply also for previous versions since
WebRtc_Word16 was always a typedef of int16_t and
WebRtc_UWord16 a typedef of uint16_t
Reviewed-by: Timothy Gu <timothygu99@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* postprocwork:
postproc/postprocess: use av_strtok()
postprocess: make some variables in pp_get_mode_by_name_and_quality() const
postproc: simplify forwarding return codes
libpostproc/postprocess: avoid some if()
fate: add fate-filter-pp1
This is merged instead of just fast forward pushed due to a bug in the git hook
which does not allow commits to change filter-video.mak except merge commits.
filter-video.mak contains a few tabs, which are needed due to Makefile syntax
Merged-by: Michael Niedermayer <michaelni@gmx.at>
No point in having the sad8 functions separate now that the loop is no
longer unrolled.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
* commit '2bb2c2bd75e5f4b28a945511cda77e0a1a44c758':
rtpenc_chain: Pass the initial time_base hint on to the chained muxer
See: [FFmpeg-devel] [PATCH] avformat/rtpenc_chain: Set timebase
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3f2c70355ab722bc9f741bd3ed8224c7cfb62379':
configure: Use the right variables in check_host_cpp
See: 453944cc77
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The token 'vector' is a keyword in the Vector/SIMD Multimedia Extension data types and thus should not be used as a variable name.
This fixes building on powerpc/ppc64el.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
In practice this hint is ignored - the rtp muxer always overwrites
the stream time base without taking the hint into account. But as
a general practice this is the correct way to pass a time base hint
on to a chained muxer.
This avoids warnings about using the codec time base as hint
being deprecated.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '2dd09ebf5597fd5e4a573bee9cccf21ae821f286':
cmdutils: Print a more sensible message in show_filters() w/o libavfilter
Conflicts:
cmdutils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The size variable is (correctly) unsigned, but is passed to several functions
which take signed parameters, such as avio_read, sometimes after having
numbers added to it. So ensure that size remains within the bounds that
these functions can handle.
CC: libav-stable@libav.org
Signed-off-by: Diego Biurrun <diego@biurrun.de>
This adds back support for 8x4 and 8x16
it does not support 8x2, i think nothing uses that
Found-by: ubitux
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Also add a missing c->pix_abs[0][0] initialization, and sse2 versions of
sad16_x2, sad16_y2 and sad16_xy2 (%15 to %20 faster than mmxext).
Since the _xy2 versions are not bitexact, they are accordingly marked as
approximate.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* cus/stable:
ffplay: use frame queue to determine last used pos
ffplay: factorize frame queue operations
Merged-by: Michael Niedermayer <michaelni@gmx.at>
It appears this breaks build with MSVC
until someone who has MSVC setup has time to investigate and
workaround/fix this, its better to revert so that build is not broken
Thats even more so as the original commit only fixed a hypothetical issue
This reverts commit e587a428d7.
Create a generic frame and a frame queue struct to handle video picture queues
and subtitle picture queues with common code. Also add the possibility to queue
AVFrames, however at the moment we only use SDL_Overlay buffers for video and
AVSubtitles for subtitles.
Signed-off-by: Marton Balint <cus@passwd.hu>
* commit '2d589273dd36c5eb271a035ea0e669b64dae257f':
configure: Split adding of CFLAGS and CPPFLAGS for hardened toolchain
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '00431bf874e1044b01e09a2266ef85d4ff8d44cc':
ismindex: handle time discontinuities and nonzero start time
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This adds a new option -hls_flags single_file that creates one .ts file
for HLS and adds byteranges to the .m3u8 file, instead of creating one
.ts file for each segment.
This is helpful at least for storing large number of videos, as the
number of files per video is drastically reduced and copying and storing
those files takes less requests and inodes.
This is based on work by Nicolas Martyanoff, discussed on ffmpeg-devel
in July 2014. That patch seems abandoned by the author, and contained
unrelated changes. This patch tries to add the minimum amount of code to
support the byterange playlists.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The input file may not have consistent start times, stream durations and
chunk durations. This patch at least removes negative durations that
make chromecast unhappy, and correctly sets starting time on chunks so
that the split (or .ismf) outputs match the manifest.
Signed-off-by: Martin Storsjö <martin@martin.st>
Handles decoding of new VP9 profiles 1-3 with different color sampling
and bit-depths.
For high bitdepth (profiles 2 and 3) support, we currently need to link
with the highbitdepth branch of libvpx with --enable-experimental
and --enable-vp9-high config options on. But eventually this branch will
be merged into master, whereafter to enable high bitdepth
support you will need to link with libvpx with configure option
--enable-vp9-highbitdepth on.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
{"dsurex_mode","Dolby Surround EX Mode",OFFSET(dolby_surround_ex_mode),AV_OPT_TYPE_INT,{.i64=AC3ENC_OPT_NONE},AC3ENC_OPT_NONE,AC3ENC_OPT_MODE_ON,AC3ENC_PARAM,"dsurex_mode"},
{"dsurex_mode","Dolby Surround EX Mode",OFFSET(dolby_surround_ex_mode),AV_OPT_TYPE_INT,{.i64=AC3ENC_OPT_NONE},AC3ENC_OPT_NONE,AC3ENC_OPT_DSUREX_DPLIIZ,AC3ENC_PARAM,"dsurex_mode"},
@@ -45,6 +39,11 @@ static av_cold int avui_encode_init(AVCodecContext *avctx)
avctx->extradata[19]=1;
}
avctx->coded_frame=av_frame_alloc();
if(!avctx->coded_frame){
av_log(avctx,AV_LOG_ERROR,"Could not allocate frame.\n");
returnAVERROR(ENOMEM);
}
return0;
}
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.