Based in part by a fix from Michael Niedermayer <michaelni@gmx.at>
Fixes CVE-2011-3947
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
(cherry picked from commit b57d262412204e54a7ef8fa1b23ff4dcede622e5)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
(cherry picked from commit 083a8a00373b12dc06b8ae4c49eec61fb5e55f4b)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Fixes invalid free() if any of the buffers are not allocated due to either
not decoding a header or an error prior to allocating all buffers.
Fixes CVE-2012-0858
CC: libav-stable@libav.org
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
(cherry picked from commit 204cb29b3c84a74cbcd059d353c70c8bdc567d98)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
(cherry picked from commit 6fc3287b9ccece290c5881b92948772bbf72e68c)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Add a check to avoid writing past the end of the channel_unit.components[]
array.
Bug Found by: cosminamironesei
Fixes CVE-2012-0853
CC: libav-stable@libav.org
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
(cherry picked from commit c509f4f74713b035a06f79cb4d00e708f5226bc5)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
(cherry picked from commit f43b6e2b1ed47a1254a5d44c700a7fad5e9784be)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Progressive images can have only 16 references, error out if there are
more, since the data is almost certainly corrupt, and the invalid value
will lead to random crashes or invalid writes later on.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit e0febda22d0e0fab094a9c886b0e0f0f662df1ef)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
The safe bitstream reader broke it since the buffer size was specified
in bytes instead of bits.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
CC: libav-stable@libav.org
(cherry picked from commit a1c036e961a32f7208e7315dabfa0ee99d779edb)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
We slightly overread the input buffer, so we require
padding at the end of the buffer, as is documented in the
get_bits API. Without padding, we'll read uninitialized
data or beyond the end of the .rodata, which may crash.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit 4ffe5e2aa5241f8da9afd2c8fbc854dcc916c5f9)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
This way, it protects against overreads for 4bpp/2bpp content also.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit cc5dd632cecc5114717d0b90f8c2be162b1c6ee8)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
We need to set ms_stereo in encode_init() in order to avoid incorrectly
encoding the first frame as non-m/s while flagging it as m/s. Fixes an
uncomfortable pop in the left channel at the start of playback.
CC:libav-stable@libav.org
(cherry picked from commit 51ddf35c9017018e58c15275ff5b129647a0c94d)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
ff_wma_init() allows up to 50kHz, but this generates an exponent band
size table that requires 65 bands. The code assumes 25 bands in many
places, and using sample rates higher than 48kHz will lead to buffer
overwrites.
CC:libav-stable@libav.org
(cherry picked from commit 1ec075cfecac01f9a289965db06f76365b0b1737)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
This is near the theoretical limit for wma frame size and is the most that
our decoder can handle. Allowing higher bit rates will just end up padding
each frame with empty bytes.
Fixes invalid writes for avconv when using very high bit rates.
CC:libav-stable@libav.org
(cherry picked from commit c2b8dea1828f35c808adcf12615893d5c740bc0a)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
The maximum theoretical frame size is around 17000 bytes. Although in
practice it will generally be much smaller, we require a larger buffer
just to be safe.
CC: libav-stable@libav.org
(cherry picked from commit dfc4fdedf8cfc56a505579b1f2c1c5efbce4b97e)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Because in contrast to the decoder, the parser does not setup low_delay.
The code in parse_nal_units would always end up setting has_b_frames
to "1", except when stream is explicitly marked as low delay.
Since the parser itself would create 'extradata', simply reopening
the parser would cause this.
This happens for instance in estimate_timings_from_pts(), which causes the
parser to be reopened on the same stream.
This fixes Libav #22 and FFmpeg (trac) #360
CC: libav-stable@libav.org
Based on a patch by Reimar Döffinger <Reimar.Doeffinger@gmx.de>
(commit 31ac0ac29b6bba744493f7d1040757a3f51b9ad7)
Comments and description adapted by Reinhard Tartler.
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
(cherry picked from commit 790a367d9ecd04360f78616765ee723f3fe65645)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Prevents crash when trying to copy from a non-existing plane in e.g.
a RGB32 reference image to a YUV420P target image
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit 830f70442a87a31f7c75565e9380e3caf8333b8a)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
This prevents crashes when trying to read beyond the end of the buffer
while decoding frame data.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit be129271eac04f91393bf42a490ec631e1a9abea)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
This prevents crashers and errors further down when reading nodes in the
empty tree.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit 2b83e8b7005d531bc78b0fd4f699e9faa54ce9bb)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Return 0 indicates "please return the same data again", i.e. it causes
an infinite loop. Instead, return that we consumed the buffer if we
finished decoding succesfully, or return an error if an error occurred.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit 74699ac8c8b562e9f8d26e21482b89585365774a)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
