Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit d167faafe9dfa0b82bebb267c3c4e5fa5286bd67)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/release/0.8: (23 commits)
snow: Check mallocs at init
vorbis: Validate that the floor 1 X values contain no duplicates.
vorbisenc: check all allocations for failure
indeo3: validate new frame size before resetting decoder
lavfi: avfilter_merge_formats: handle case where inputs are same
rv34: error out on size changes with frame threading
rv34: Handle only complete frames in frame-mt.
rv34: use AVERROR return values in ff_rv34_decode_frame()
vlc/rl: Add ff_ prefix to the nonstatic symbols
h263: Add ff_ prefix to nonstatic symbols
alsdec: check opt_order.
golomb: check remaining bits during unary decoding in get_ur_golomb_jpegls()
lavf: don't segfault when a NULL filename is passed to avformat_open_input()
mpegvideo: Don't use ff_mspel_motion() for vc1
imgconvert: avoid undefined left shift in avcodec_find_best_pix_fmt
eval: fix swapping of lt() and lte()
nuv: check RTjpeg header for validity
Revert "nuv: check per-frame header for validity."
bmpdec: only initialize palette for pal8.
sipr: fall back to setting mode based on bit_rate.
...
Conflicts:
avconv.c
libavcodec/dnxhddec.c
libavcodec/golomb.h
libavcodec/h263.h
libavcodec/imgconvert.c
libavcodec/mpegvideo_common.h
libavcodec/mpegvideo_enc.c
libavcodec/nuv.c
libavcodec/rv34.c
libavcodec/sipr.c
libavcodec/vorbisdec.c
libavcodec/vorbisenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Martin Storsjö <martin@martin.st>
(cherry picked from commit e96b4a53df101403c54e329abfadad2edddc47c4)
Conflicts:
libavcodec/4xm.c
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The MDCT buffers in the decoder are only sized for up to 11 bits. The
reverse engineered documentation for WMA1/2 headers say that that for
all samplerates above 32kHz 11 bits are used. 12 and 13 bit support
were added for WMAPro. I was unable to make any Microsoft tools generate
a test file at a samplerate above 48kHz.
Discovered by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit d78bb1a4b2a3a415b68e4e6dd448779eccec64e3)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* qatar/master: (22 commits)
wma: Clip WMA1 and WMA2 frame length to 11 bits.
movenc: Don't require frame_size to be set for modes other than mov
doc: Update APIchanges with info on muxer flushing
movenc: Reindent a block
tools: Remove some unnecessary #undefs.
rv20: prevent calling ff_h263_decode_mba() with unset height/width
tools: K&R reformatting cosmetics
Ignore generated aviocat and ismindex tools.
build: Automatically include architecture-specific library Makefile snippets.
indeo5: prevent null pointer dereference on broken files
pktdumper: Use usleep instead of sleep
cosmetics: Remove some unnecessary block braces.
Drop unnecessary prefix from *sink* variable and struct names.
Add a tool for creating smooth streaming manifests
movdec: Calculate an average bit rate for fragmented streams, too
movenc: Write the sample rate instead of time scale in the stsd atom
movenc: Add a separate ismv/isma (smooth streaming) muxer
movenc: Allow the caller to decide on fragmentation
libavformat: Add a flag for muxers that support write_packet(NULL) for flushing
movenc: Add support for writing fragmented mov files
...
Conflicts:
Changelog
cmdutils.c
cmdutils.h
doc/APIchanges
ffmpeg.c
ffplay.c
libavfilter/Makefile
libavformat/Makefile
libavformat/avformat.h
libavformat/movenc.c
libavformat/movenc.h
libavformat/version.h
tools/graph2dot.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The MDCT buffers in the decoder are only sized for up to 11 bits. The
reverse engineered documentation for WMA1/2 headers say that that for
all samplerates above 32kHz 11 bits are used. 12 and 13 bit support
were added for WMAPro. I was unable to make any Microsoft tools generate
a test file at a samplerate above 48kHz.
Discovered by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
* qatar/master: (22 commits)
aacdec: Fix PS in ADTS.
avconv: Consistently use PIX_FMT_NONE.
dsputil: use cpuflags in x86 emu_edge_core
dsputil: use movups instead of movdqu in ff_emu_edge_core_sse()
wma: initialize prev_block_len_bits, next_block_len_bits, and block_len_bits.
mov: Remove some redundant and obsolete comments.
Add libavutil/mathematics.h #includes for INFINITY
doxy: structure libavformat groups
doxy: introduce an empty structure in libavcodec
doxy: provide a start page and document libavutil
doxy: cleanup pixfmt.h
regtest: split video encode/decode tests into individual targets
ARM: add explicit .arch and .fpu directives to asm.S
pthread: do not touch has_b_frames
avconv: cleanup the transcoding loop in output_packet().
avconv: split subtitle transcoding out of output_packet().
avconv: split video transcoding out of output_packet().
avconv: split audio transcoding out of output_packet().
avconv: reindent.
avconv: move streamcopy-only code out of decoding loop.
...
Conflicts:
avconv.c
libavcodec/aaccoder.c
libavcodec/pthread.c
libavcodec/version.h
libavutil/audioconvert.h
libavutil/avutil.h
libavutil/mem.h
tests/ref/vsynth1/dv
tests/ref/vsynth1/mpeg2thread
tests/ref/vsynth2/dv
tests/ref/vsynth2/mpeg2thread
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The initial values are not checked against the number of block sizes.
Initializing them to frame_len_bits will result in a block size index of 0
in these cases instead of something that might be out-of-range.
Fixes Bug 81.
These windows do not really belong in fft/mdct files and were
easily confused with the similarly named tables used by rdft.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This will be beneficial for use with the audio conversion API without
requiring it to depend on all of dsputil.
Signed-off-by: Mans Rullgard <mans@mansr.com>
(cherry picked from commit c73d99e672329c8f2df290736ffc474c360ac4ae)
This will be beneficial for use with the audio conversion API without
requiring it to depend on all of dsputil.
Signed-off-by: Mans Rullgard <mans@mansr.com>
- remove unneeded vlc code < 0 check
- reorder vlc code handling so that the unlikely escape decoding
part comes last
- move overflow check out of the decode loop
- branchless sign conversion
Originally committed as revision 19234 to svn://svn.ffmpeg.org/ffmpeg/trunk
and change default type to float so that the run level
decoding functionality can be shared with wmapro
Originally committed as revision 19231 to svn://svn.ffmpeg.org/ffmpeg/trunk
256, 512, 1024 and 2048) to mdct.c. Make them accessible via dsputil.h. Make
wma.c use these shared tables.
Originally committed as revision 14758 to svn://svn.ffmpeg.org/ffmpeg/trunk
Patch by Ian Braithwaite ian .. braithwaite . dk
[Ffmpeg-devel] WMA decoder speedup 2007-03-22 22:56
Originally committed as revision 8526 to svn://svn.ffmpeg.org/ffmpeg/trunk
