* qatar/master:
ac3enc: add macros for option names to make them more understandable.
ac3enc: fix 'channel_coupling' option to actually allow 'auto'.
cavs: fix some crashes with invalid bitstreams
ac3enc: clip coupling coordinates during calculation
Remove incorrect info in documentation of AVCodecContext.bits_per_raw_sample.
lavc: fix parentheses placement in avcodec_open2().
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is faster than using the clip_coefficients() function. Also,
clipping the coordinates before determining reuse is better since it
will compare coordinates that are closer to their final encoded values.
* qatar/master:
lavc: make avcodec_init() static on next bump.
ac3enc: remove unneeded #include
ac3enc: restructure coupling coordinate reuse calculation
ac3enc: allow new coupling coordinates to be sent independently for each channel.
ac3enc: separate exponent bit counting from exponent grouping.
h264: propagate error return values for AV_LOG_ERROR-triggering events
aac: Don't attempt to output configure an invalid channel configuration.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Move bit counting to the bit allocation function. Move exponent grouping to
after bit allocation. This will allow for adjustment of bandwidth parameters
during bit allocation without having to do exponent grouping multiple times.
Old version was based on lots of guesswork which had different hacks based on
32-bit version field instead of splitting it into major/minor/micro version.
RV2 picture header parser also had a few places where it deviated from binary
decoder.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
* qatar/master:
libx264: do not set pic quality if no frame is output
libx264: add preset, tune, profile and fastfirstpass private options
Conflicts:
libavcodec/libx264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
applehttp: fix variant discard logic
h263dec: Fix asserts broken by the elimination of FF_COMMON_FRAME.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
cosmetics: remove some stray comments from AVCodec declarations
cosmetics: fix indentation/alignment in AVCodec declarations
arm: Avoid using the movw instruction needlessly
Move an int64_t down in MpegEncContext
Conflicts:
libavcodec/arm/ac3dsp_armv6.S
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
Revert "swscale: use 15-bit intermediates for 9/10-bit scaling."
swscale: use 15-bit intermediates for 9/10-bit scaling.
dct32: Add SSE2 ASM optimizations
Correct chroma vector calculation for RealVideo 3.
lavf: Add an option to discard corrupted frames
mpegts: Mark wrongly-sized packets as corrupted
mpegts: Move scan test to handle_packets
mpegts: Mark corrupted packets
mpegts: Reset continuity counter on seek
mpegts: Fix for continuity counter
mpegts: Silence "can't seek" warning on unseekable
apichange: add an entry for AV_PKT_FLAG_CORRUPT
avpacket: signal possibly corrupted packets
mpeg4videodec: remove dead code that would have detected erroneous encoding
aac: Remove some suspicious illegal memcpy()s from LTP.
bink: Eliminate unnecessary shadow declaration.
Conflicts:
doc/APIchanges
libavcodec/version.h
libavformat/avformat.h
libavformat/options.c
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Old version divided it wrong, which resulted in chroma drift (visible on FATE
sample too as dirty trails left by clouds).
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Use AV_PKT_FLAG_CORRUPT flag to mark packets that might be incomplete
or have errors. Formats that have a mean to validate their packets
should use this flag to deliver such information instead of silently
dropping the packets.
* qatar/master:
lavc: Deprecate unused FF_ER_VERY_AGGRESSIVE
x11grab: add show_region AVOption.
x11grab: add follow_mouse AVOption.
Do not convert RGB buffer at once when stride does not fit exact samples.
Conflicts:
libswscale/swscale_unscaled.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
mxfdec: Include FF_INPUT_BUFFER_PADDING_SIZE when allocating extradata.
H.264: tweak some other x86 asm for Atom
probe: Fix insane flow control.
mpegts: remove invalid error check
s302m: use nondeprecated audio sample format API
lavc: use designated initialisers for all codecs.
x86: cabac: add operand size suffixes missing from 6c32576
Conflicts:
libavcodec/ac3enc_float.c
libavcodec/flacenc.c
libavcodec/frwu.c
libavcodec/pictordec.c
libavcodec/qtrleenc.c
libavcodec/v210enc.c
libavcodec/wmv2dec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
h263dec: Propagate AV_LOG_ERRORs from slice decoding through frame decoding with sufficient error recognition
x86: cabac: don't load/store context values in asm
H.264: optimize CABAC x86 asm for Atom
vp3/theora: flush after seek.
doc/fftools-common-opts: wording fixes missing from the previous commit.
doc: document using AVOptions in fftools.
cmdutils: add codec_opts parameter to setup_find_stream_info_opts()
cmdutils: clarify documentation for filter_codec_opts()
cmdutils: clarify documentation for setup_find_stream_info_opts()
lavf: add forgotten attribute_deprecated to av_find_stream_info()
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Inspection of compiled code shows gcc handles these fine on its own.
Benchmarking also shows no measurable speed difference.
Removing the remaining cases in get_cabac_bypass_sign_x86() does
cause more substantial changes to the compiled code with uncertain
impact.
Signed-off-by: Mans Rullgard <mans@mansr.com>
The current checks on MMCO parameters prohibits a "max long term frame index
plus 1" of 16 (frame idx of 15) for the "set max long term frame index" MMCO.
Fix this off-by-one error to allow the full range of legal values.
"SAR" (Sample Aspect Ratio) is globally preferred over "PAR" (Pixel
Aspect Ratio), although the two terms share the same semantics.
For example the corresponding AVStream field is called
sample_aspect_ratio, and libavfilter has a filter named setsar.
Therefore prefer the term "SAR" over "PAR" in the
libavformat/utils.c:dump_stream_format() and avcodec_string() output
for avoiding confusion.
* qatar/master:
ppc: remove redundant setting of Altivec IDCT
mpegvideo: initialise DSPContext in ff_dct_common_init()
cosmetics: reindent
eac3enc: support writing of basic mixing and info metadata
dnxhdenc: fix declarations in for loops
dsputil: remove stale bink prototypes and comments
dsputil: move a bink-only function to binkdsp
dsputil: remove some unused functions
bink: make IDCT take 32-bit input
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The functions and tables initialised in this function rely on an
initialised DSPContext. Make sure they always have one.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Since IDCT transforming 32-bit input to 8-bit output is unusual and unpractical
for most codecs, move Bink IDCT into separate context. Get rid of an additional
permutation table while at it since SIMD support for Bink IDCT is unlikely to
be implemented in foreseeable future.
Quantisation tables also have to change type to signed for proper
dequantisation of DCT coefficients.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master:
configure: spelling cosmetics
dctref: make sure function declarations match between .c and .h file
x86: fix build with gcc 4.7
Conflicts:
configure
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Avoid the use of the brittle/inconsistent information in
PixFmtInfo.depth, and implement a possibly more robust logic which
exposes the information in pixdesc.
Also allow the removal of PixFmtInfo.depth, since this is the only use
of it.
The upcoming gcc 4.7 has more advanced constant propagation
resulting some inline asm operands becoming constants and thus
emitted as literals, sometimes in contexts where this results
in invalid instructions.
This patch changes the constraints of the relevant operands
to "rm" thus forcing a valid type. While obviously suboptimal,
this is what older gcc versions already did, and there is no
change to the code generated with these.
Signed-off-by: Mans Rullgard <mans@mansr.com>
We dereferenced the pointer two lines above, no point in
checking for NULL afterwards.
In addition it cannot be NULL the way it was initialized
just one line further above.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
The field is only used for checking if a format is YUV planar
and if the format is paletted.
This patch replaces the current is_planar_yuv() code with a function
which uses the pixdesc information. The new implementation is less
efficient, but this should not be an issue as the functions which use
it (av_picture_crop/pad()) are deprecated and currently never used in
the codebase.
Prefer data-driven over procedural logic in avg_bits_per_pixel(),
simplify and improve robustness, as it is easy to miss a function
update when a new format is added.
