* commit 'ab05ed4c322ed0488ac9b5d2ef5d4ffa55a946a7':
mpegvideo_parser: export pixel format and dimensions
Conflicts:
libavcodec/mpegvideo_parser.c
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
They are not just inverses of each other.
This should restore behavior to before the introduction of framerate
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7ea1b3472a61de4aa4d41b571e99418e4997ad41':
lavc: deprecate the use of AVCodecContext.time_base for decoding
Conflicts:
libavcodec/avcodec.h
libavcodec/h264.c
libavcodec/mpegvideo_parser.c
libavcodec/utils.c
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
When decoding, this field holds the inverse of the framerate that can be
written in the headers for some codecs. Using a field called 'time_base'
for this is very misleading, as there are no timestamps associated with
it. Furthermore, this field is used for a very different purpose during
encoding.
Add a new field, called 'framerate', to replace the use of time_base for
decoding.
* commit 'accde1bd8756936e1757b42fc9bad2eb5d192f8a':
vc1_parser: Set field_order.
mpegvideo_parser: Set field_order.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'eee2000b41234ae9465c314e18bfec1700181f32':
mpeg12: Move some ff_mpeg1_* function declarations to a more suitable place
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Also move the declaration to internal.h, and add restrict qualifiers
to the declaration (as in the implementation).
Signed-off-by: Martin Storsjö <martin@martin.st>
In ISO/IEC 13818-2, bit rate is differently determined according to video type
1) MPEG1 Video
Bit_rate and vbv_delay are set to 3FFFF and FFFF respectively
to indicate variable bitrate. Other values are for constant bitrate.
VBV is only defined for constant bit rate operation.
Ths STD supersedes the VBV model for vbr.
2) MPEG2 Video
Even if the bitrate is constant, the value of bit_rate may not be the actual bitrate
since bit_rate need only be an upper bound to that actual bitrate.
VBV is only defined for variable bit rate operation.
Constant bit rate is viewed as a special case of vbr.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
mpegvideo parser sometime get wrong stream bit rate which is 0x3FFFF*400.
But maximum bit rate of MPEG2 video is up to 80 Mbps in case 1920x1080 resolution.
When bit rate is 0x3FFFF*400, set bit rate zero.
* Problematic link
https://docs.google.com/open?id=0B6r7ZfWFIypCUkhPa0dyTGdFSE0
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c0329748b04e1f175dad8c9c2ebf22a5e2dc5b72':
fate: add a dependency helper macro
Add support for building shared libraries with MSVC
avcodec: Rename avpriv_frame_rate_tab to ff_mpeg12_frame_rate_tab
gxf: Add a local copy of the relevant parts of the frame rate table
configure: Split out msvc as a separate target OS
aviobuf: Remove a senseless ifdef in avio_seek
Conflicts:
configure
libavcodec/dirac.c
libavcodec/mpeg12data.h
libavcodec/mpeg12enc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This table doesn't need to be shared with libavformat any longer.
Add mpeg12 to the name to make it less ambiguous, while renaming it.
Signed-off-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Wolfram Gloger <wmglo@dent.med.uni-muenchen.de>
Modify the parser initialization so that parsers can
set pict_type themselves. Use this in the mpegvideo parser
so that initial frames are not unconditionally I frames.
I have had this in my tree for several years.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (27 commits)
cmdutils: use new avcodec_is_decoder/encoder() functions.
lavc: make codec_is_decoder/encoder() public.
lavc: deprecate AVCodecContext.sub_id.
libcdio: add a forgotten AVClass to the private context.
swscale: remove "cpu flags" from -sws_flags description.
proresenc: give user a possibility to alter some encoding parameters
vorbisenc: add output buffer overwrite protection
libopencore-amrnbenc: fix end-of-stream handling
ra144enc: fix end-of-stream handling
nellymoserenc: zero any leftover packet bytes
nellymoserenc: use proper MDCT overlap delay
qpeg: Use bytestream2 functions to prevent buffer overreads.
swscale: make %rep unconditional.
vp8: convert simple loopfilter x86 assembly to use named arguments.
vp8: convert idct x86 assembly to use named arguments.
vp8: convert mc x86 assembly to use named arguments.
vp8: convert loopfilter x86 assembly to use cpuflags().
vp8: convert idct/mc x86 assembly to use cpuflags().
swscale: remove now unnecessary hack.
x86inc: don't "bake" stack_offset in named arguments.
...
Conflicts:
cmdutils.c
doc/APIchanges
libavcodec/mpeg12.c
libavcodec/options.c
libavcodec/qpeg.c
libavcodec/utils.c
libavcodec/version.h
libavdevice/libcdio.c
tests/lavf-regression.sh
Merged-by: Michael Niedermayer <michaelni@gmx.at>
In most places where it's used, it's as a pointless write-only field.
Only rv10 decoder actually reads from it, but it stores some internal
version info in it. There is no reason for it to be in a public field.
* qatar/master: (38 commits)
v210enc: remove redundant check for pix_fmt
wavpack: allow user to disable CRC checking
v210enc: Use Bytestream2 functions
cafdec: Check return value of avio_seek and avoid modifying state if it fails
yop: Check return value of avio_seek and avoid modifying state if it fails
tta: Check return value of avio_seek and avoid modifying state if it fails
tmv: Check return value of avio_seek and avoid modifying state if it fails
r3d: Check return value of avio_seek and avoid modifying state if it fails
nsvdec: Check return value of avio_seek and avoid modifying state if it fails
mpc8: Check return value of avio_seek and avoid modifying state if it fails
jvdec: Check return value of avio_seek and avoid modifying state if it fails
filmstripdec: Check return value of avio_seek and avoid modifying state if it fails
ffmdec: Check return value of avio_seek and avoid modifying state if it fails
dv: Check return value of avio_seek and avoid modifying state if it fails
bink: Check return value of avio_seek and avoid modifying state if it fails
Check AVCodec.pix_fmts in avcodec_open2()
svq3: Prevent illegal reads while parsing extradata.
remove ParseContext1
vc1: use ff_parse_close
mpegvideo parser: move specific fields into private context
...
Conflicts:
libavcodec/4xm.c
libavcodec/aacdec.c
libavcodec/h264.c
libavcodec/h264.h
libavcodec/h264_cabac.c
libavcodec/h264_cavlc.c
libavcodec/mpeg4video_parser.c
libavcodec/svq3.c
libavcodec/v210enc.c
libavformat/cafdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (44 commits)
replacement Indeo 3 decoder
gsm demuxer: do not allocate packet twice.
flvenc: use first packet delay as global delay.
ac3enc: doxygen update.
imc: return error codes instead of 0 for error conditions.
imc: return meaningful error codes instead of -1
imc: do not set channel layout for stereo
imc: validate channel count
imc: check for ff_fft_init() failure
imc: check output buffer size before decoding
imc: use DSPContext.bswap16_buf() to byte-swap packet data
rtsp: add allowed_media_types option
libgsm: add flush function to reset the decoder state when seeking
libgsm: simplify decoding by using a loop
gsm: log error message when packet is too small
libgsmdec: do not needlessly set *data_size to 0
gsmdec: do not needlessly set *data_size to 0
gsmdec: add flush function to reset the decoder state when seeking
libgsmdec: check output buffer size before decoding
gsmdec: log error message when output buffer is too small.
...
Conflicts:
Changelog
ffplay.c
libavcodec/indeo3.c
libavcodec/mjpeg_parser.c
libavcodec/vp3.c
libavformat/cutils.c
libavformat/id3v2.c
libavutil/parseutils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (47 commits)
lavc: hide private symbols.
lavc: deprecate img_get_alpha_info().
lavc: use avpriv_ prefix for ff_toupper4.
lavc: use avpriv_ prefix for ff_copy_bits and align_put_bits.
lavc: use avpriv_ prefix for ff_ac3_parse_header.
lavc: use avpriv_ prefix for ff_frame_rate_tab.
lavc: rename ff_find_start_code to avpriv_mpv_find_start_code
lavc: use avpriv_ prefix for ff_split_xiph_headers.
lavc: use avpriv_ prefix for ff_dirac_parse_sequence_header.
lavc: use avpriv_ prefix for some dv symbols used in lavf.
lavc: use avpriv_ prefix for some flac symbols used in lavf.
lavc: use avpriv_ prefix for some mpeg4audio symbols used in lavf.
lavc: use avpriv_ prefix for some mpegaudio symbols used in lavf.
lavc: use avpriv_ prefix for ff_aac_parse_header().
lavf: hide private symbols.
lavf: use avpriv_ prefix for some dv functions.
lavf: use avpriv_ prefix for ff_new_chapter().
avcodec: add CODEC_CAP_DELAY note to avcodec_decode_audio3() documentation
avcodec: clarify the CODEC_CAP_DELAY note in avcodec_decode_video2()
avcodec: clarify documentation of CODEC_CAP_DELAY
...
Conflicts:
configure
doc/general.texi
libavcodec/Makefile
libavcodec/aacdec.c
libavcodec/allcodecs.c
libavcodec/avcodec.h
libavcodec/dv.c
libavcodec/dvdata.c
libavcodec/dvdata.h
libavcodec/libspeexenc.c
libavcodec/mpegvideo.c
libavcodec/version.h
libavformat/avidec.c
libavformat/dv.c
libavformat/dv.h
libavformat/flvenc.c
libavformat/mov.c
libavformat/mp3enc.c
libavformat/oggparsespeex.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
None of these symbols should be accessed directly, so declare them as
hidden.
Signed-off-by: Mans Rullgard <mans@mansr.com>
(cherry picked from commit d36beb3f69)
r12684 | michael | 2008-04-04 02:43:34 +0200 (Fri, 04 Apr 2008) | 2 lines
Disable the split function. This should end the mpeg1/2 global header issues.
The split function is essential for -ss to work
Fixes issue1226
If this breaks something please tell me, also if someoen remembers what problem
this originally caused tell me too, i searched but couldnt find it.
Originally committed as revision 21621 to svn://svn.ffmpeg.org/ffmpeg/trunk
of calling it at the end of a frame with a large negative offset.
This significantly reduces the maximal distance in container packets between
the point where the first byte of the "access unit" was stored and where
we call ff_fetch_timestamp() thus reducing the constraints on our parser.
Also change the parser from next_frame_offset to cur, this is needed
because now the reference is from container packet start instead of
frame start. (i previously misinterpreted this as bug)
Originally committed as revision 17731 to svn://svn.ffmpeg.org/ffmpeg/trunk
