Currently, this option is accessed through AVCodecContext.mb_threshold,
which originally controlled reusing MB data when transcoding mpeg to
mpeg. Since the libvpx meaning is completely different from the original
mpegvideo meaning, it is better to use a separate private option for
this.
* commit '66e9f839536238945fbfe9d2041b6891cb150e45':
libfdk-aacdec: Enable Dynamic Range Control Metadata Support
Conflicts:
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
For streams which contain DRC metadata, the FDK decoder is able to
control rendering of the decoded output. The rendering parameters
are detailed in fdk_aac_dec_options [].
The default behavior is left up to the decoder.
Signed-off-by: Martin Storsjö <martin@martin.st>
The FDK decoder is capable of producing mono and stereo downmix from
multichannel streams. These streams may contain metadata that control
the downmix process. The decoder requires an Ancillary Buffer in order to
correctly apply downmix in streams containing downmix Metadata. The
decoder does not have an API interface to inform of the presence of
Metadata in the stream, and therefore the Ancillary Buffer is always
allocated whenever a downmix is requested.
When downmixing multichannel streams, the decoder requires the output
buffer in aacDecoder_DecodeFrame call to be of fixed size in order to
hold the actual number of channels contained in the stream. For example,
for a 5.1ch to stereo downmix, the decoder requires that the output buffer
is allocated for 6 channels, regardless of the fact that the output is in
fact two channels.
Due to this requirement, the output buffer is allocated for the maximum
output buffer size in case a downmix is requested (and also during
decoder init). When a downmix is requested, the buffer used for output
during init will also be used for the entire duration the decoder is open.
Otherwise, the initial decoder output buffer is freed and the decoder
decodes straight into the output AVFrame.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '1ac5a29b2e5ddeae068deb9d6e0e803a91941d4d':
imc: fix order of operations in coefficients read
Merged-by: Michael Niedermayer <michaelni@gmx.at>
They are not just inverses of each other.
This should restore behavior to before the introduction of framerate
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
They are not just inverses of each other.
This should restore behavior to before the introduction of framerate
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
They are not just inverses of each other.
This should restore behavior to before the introduction of framerate
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7ea1b3472a61de4aa4d41b571e99418e4997ad41':
lavc: deprecate the use of AVCodecContext.time_base for decoding
Conflicts:
libavcodec/avcodec.h
libavcodec/h264.c
libavcodec/mpegvideo_parser.c
libavcodec/utils.c
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c1724623ce0433c6a9ee72133b1fd4db75ec7193':
vdpau: have av_vdpau_bind_context() fail on unsupported flag
Merged-by: Michael Niedermayer <michaelni@gmx.at>
When decoding, this field holds the inverse of the framerate that can be
written in the headers for some codecs. Using a field called 'time_base'
for this is very misleading, as there are no timestamps associated with
it. Furthermore, this field is used for a very different purpose during
encoding.
Add a new field, called 'framerate', to replace the use of time_base for
decoding.
Decoding acceleration may work even if the codec level is higher than
the stated limit of the VDPAU driver. Or the problem may be considered
acceptable by the user. This flag allows skipping the codec level
capability checks and proceed with decoding.
Applications should obviously not set this flag by default, but only if
the user explicitly requested this behavior (and presumably knows how
to turn it back off if it fails).
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* commit '2df0c32ea12ddfa72ba88309812bfb13b674130f':
lavc: use a separate field for exporting audio encoder padding
Conflicts:
libavcodec/audio_frame_queue.c
libavcodec/avcodec.h
libavcodec/libvorbisenc.c
libavcodec/utils.c
libavcodec/version.h
libavcodec/wmaenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1f29e5d7a2b0950f3b6820896e97e2c02e6a10a9':
h263dec: call get_format after setting resolution and profile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Currently, the amount of padding inserted at the beginning by some audio
encoders, is exported through AVCodecContext.delay. However
- the term 'delay' is heavily overloaded and can have multiple different
meanings even in the case of audio encoding.
- this field has entirely different meanings, depending on whether the
codec context is used for encoding or decoding (and has yet another
different meaning for video), preventing generic handling of the codec
context.
Therefore, add a new field -- AVCodecContext.initial_padding. It could
conceivably be used for decoding as well at a later point.
move the code after the existing NULL check
Fixes: signal_sigsegv_844d59_10_signal_sigsegv_a17bb7_366_mpegts_mpeg2video_mp2_dvbsub_topfield.rec
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
In vp9_decode_frame function, ff_thread_finish_setup is not called
when refreshctx is equal to 0, and the next decoding thread can not
start work until the cunrrent frame has been decoded completely. So
ff_thread_finish_setup needs to be called to enable Multi-thread
decoding in this condition.
Signed-off-by: Di Wu <di1028.wu@samsung.com>
Signed-off-by: Reynaldo H. Verdejo Pinochet <reynaldo@osg.samsung.com>
* commit 'eddf95283fbba1b469b76e7518bc3941f671b193':
vp9: initialize color space and range properties
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '65875a8b3b079752da25a61ec188d2e3d90a569f':
vp8: initialize color space and range properties
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9d5fed6dc4cccb0689f694112f5026988bebc472':
avcodec: fix descriptions on color transfer options
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9f3a70c44224ed92d91df65bb9470a2649e7d019':
dump: print the original coded dimensions when available
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '41e86146e7240f9d42e8cdb86a94bb3eb2bbe15f':
dump: print detailed color space information
full color triplets are only printed if they are not all equal, otherwise
they are printed as before
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '20a5956b8daeee4cb59d6fa00ec809b02c04d7f8':
dump: split audio and video probing on multiple lines
Conflicts:
libavcodec/utils.c
libavformat/dump.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '147f2e91eece6b9021ff5b7f8a3b5ce053566659':
avcodec: make sure color_range is properly initialized
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This makes the addition of arch optimized functions easier.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* commit '9a03c2323593173a201cb75edd1b49887cf811ed':
h263dec: Force padding bug workaround for H.263.
This is not merged as it breaks a good part of the error concealment/resilience for H.263
Also, messenger.h263 plays fine in ffmpeg.
If anyone has any other h263 files that do not work, please open an issue on trak or
mail me!
See: d225b0f7aa
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd208d1eba3799c58fd6d3602d31de3e686f14aec':
hevc_mvs: make sure to always initialize the temporal MV fully
Conflicts:
libavcodec/hevc_mvs.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '79a60c8e779242b5ba4c531b2c706c871e8e6420':
hevc_mvs: initialize the temporal MV in case of missing ref
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The register function now specifies that the user callback should
leave things in the same state that it found them on failure but
that failure to destroy is ignored by the library. The register
function is now explicit about its behavior on failure
(it unregisters the previous callback and destroys all mutex).
Signed-off-by: Manfred Georg <mgeorg@google.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* commit 'bef067f88c74190cdf7e76d12f02e12e069974aa':
vdpau: check video surface and decoder capabilities
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ce083282f0a8b7d63c4047c30b7bac498f9806dd':
vdpau: common support for managing the VdpDecoder in avcodec
Conflicts:
libavcodec/vdpau.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This function provides an explicit VDPAU device and VDPAU driver to
libavcodec, so that the application is relieved from codec specifics
and VdpDevice life cycle management.
A stub flags parameter is added for future extension. For instance, it
could be used to ignore codec level capabilities (if someone feels
dangerous).
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This is necessary to recreate the decoder with the correct parameters,
as not all codecs invoke get_format() in this case.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
it should not be possible to be larger as its stored as 8bit value
but we would be overwriting a stack buffer if it is ...
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Using the not so new init and uninit callbacks, avcodec can now take
care of creating and destroying the VDPAU decoder instance.
The application is still responsible for creating the VDPAU device
and allocating video surfaces - this is necessary to keep video
surfaces on the GPU all the way to the output. But the application
will no longer needs to care about any codec-specific aspects.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Fixes out of array access
Fixes: asan_heap-oob_4da4f3_7_asan_heap-oob_4da4f3_173_Xmen_avc_500.vp6
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
cherry picked from commit df8ebe304df453f26c28ff8f11d607f49b90a4c2
Fixes out of array access
Fixes: asan_stack-oob_1046454_9_asan_stack-oob_15a9e7c_170_WP_MAIN10_B_Toshiba_3.bit
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array read
Fixes: asan_heap-oob_e476fc_2_asan_heap-oob_1333ec6_61_CAMACI3_Sony_C.jsv
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This avoids out of array accesses
Fixes: asan_heap-uaf_21f42e4_9_asan_heap-uaf_21f42e4_278_gl2.mov
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array access
Fixes: asan_heap-oob_1685bf0_5_asan_heap-oob_1f35116_430_smc.mov
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array access
Fixes: asan_heap-oob_153760f_4_asan_heap-oob_1d7a4cf_164_VWbig6.avi
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
also change it to a loop
Fixes out of array access
Fixes: asan_heap-oob_ca5410_8_asan_heap-oob_ca5410_97_ID_LSD_Size_Less_Then_Data_Inter_3.gif
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array access
Fixes: asan_heap-oob_4da0ba_6_asan_heap-oob_4da0ba_241_cvid_crash.avi
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array accesses
Fixes: asan_heap-oob_14dbfcf_4_asan_heap-oob_1ce5767_179_add_method_small.png
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes pixel format selection
Fixes out of array accesses
Fixes: asan_heap-oob_1766029_6_asan_heap-oob_20aa045_332_cov_1823216757_m2-d1d366d7965db766c19a66c7a2ccbb6b.tif
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array access
Fixes: asan_heap-oob_4da4f3_8_asan_heap-oob_4da4f3_419_scene1a.mm
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array accesses
Fixes: asan_heap-oob_12304aa_8_asan_heap-oob_4da4f3_300_intro.jv
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array accesses
Fixes: asan_heap-oob_16668e9_2_asan_heap-oob_16668e9_346_miss_congeniality_pegasus_mjpg.avi
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
previously it could have been by 1 too large
Fixes out of array access
Fixes: asan_heap-oob_12240f5_1_asan_heap-oob_12240f5_448_t8c1e3.jls
Fixes: asan_heap-oob_12240f5_1_asan_heap-oob_12240f5_448_t8nde0.jls
Fixes: asan_heap-oob_12240fa_1_asan_heap-oob_12240fa_448_t16e3.jls
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The register function now specifies that the user callback should
leave things in the same state that it found them on failure but
that failure to destroy is ignored by the library. The register
function is now explicit about its behavior on failure
(it unregisters the previous callback and destroys all mutex).
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Add CODEC_FLAG2_SKIP_MANUAL (exposed as "skip_manual"), which makes
the decoder export sample skip information via side data, instead
of applying it automatically. The format of the side data is the
same as AV_PKT_DATA_SKIP_SAMPLES, but since AVPacket and AVFrame
side data constants overlap, AV_FRAME_DATA_SKIP_SAMPLES needs to
be introduced.
This is useful for applications which want to do the timestamp
calculations manually, or which actually want to retrieve the
padding.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This makes the addition of arch optimized functions easier.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
~15% faster.
Also add an mmxext version that takes advantage of the new code, and
build it alongside with the mmx version only on x86_32.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
This is similar to what is done in libx264.c
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
A badly behaving user provided mutex manager (such as that in OpenCV) may not reset the mutex to NULL on destruction. This can cause a problem for a later mutex manager (which may assert that the mutex is NULL before creating).
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
When only SPS or PPS is present in the stream, copy the missing one from
AVCC before insertion to the output stream.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This also un-does the fate changes from a52f443714,
leaving this fix without even small differences in the output, that is
a sample for which this makes a vissible difference is very welcome
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes CID1194380
There are no vissible differences in the changed fate samples. Only
a tiny number of pixels change by tiny amounts in the frames i checked
If someone has a file that shows a vissible difference, please post it.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'cc4992aaf3dbb0af88d9727983d75636baf1f8cc':
ac3enc: allow Dolby Pro Logic IIz as the Dolby Surround EX mode.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '4c2fd4b262347273afe97865ba451a1abde43ae6':
ac3enc: allow Dolby Pro Logic II as a preferred downmix mode.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b5fe13448b13bfdd48a75b7e12387e11e3526d7c':
vc1: Use logical instead of bitwise or for coded_inter
Merged-by: Michael Niedermayer <michaelni@gmx.at>
It may be used by ff_add_pixels_clamped_sse2().
Should fix fate-cavs failures on some systems.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
* commit 'd07ddc93e29a4fdf12cd426953a7ecd5abe5e36d':
avcodec: Fix a doxy comment to refer to the right function
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Also add sse2 versions for both.
put_pixels_clamped port and sse2 version originally written by Timothy Gu.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
Same behavior as in simple_idct.
This way the best optimized versions available will be used instead.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
Roughly 25% faster MC than ssse3 for blocksizes 32 and 64.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
The fourth substream is being discarded, since its not raw audio data,
but an encoded Atmos stream which needs a specialized decoder.
Fixes decoding of the true hd stream from Transformers\ -\ Age\ of\ Extinction\ 2014\ 1080P-003.mkv
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The extra bits have already been masked, so this was not doing anything.
Noticed-by: Justin Ruggles
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Also add mmxext versions of vsad8 and vsad_intra8, and sse2 versions of
vsad16 and vsad_intra16.
Since vsad8 and vsad16 are not bitexact, they are accordingly marked as
approximate.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
See https://code.google.com/p/webp/issues/detail?id=206
for a description of the problem/fix.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This patch makes the decoder follow the recommendation of the spec.
There is some disagreement (see "[FFmpeg-devel] [PATCH]: libavcodec/webp")
about what would be best to be written in the spec, so in case the spec
is changed again, this potentially would need to be amended or reverted
in the latest git commits of libilbc developers removed WebRtc_xxx typedefs
This commit uses int types instead,
it's safe to apply also for previous versions since
WebRtc_Word16 was always a typedef of int16_t and
WebRtc_UWord16 a typedef of uint16_t
Reviewed-by: Timothy Gu <timothygu99@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
No point in having the sad8 functions separate now that the loop is no
longer unrolled.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
This adds back support for 8x4 and 8x16
it does not support 8x2, i think nothing uses that
Found-by: ubitux
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Also add a missing c->pix_abs[0][0] initialization, and sse2 versions of
sad16_x2, sad16_y2 and sad16_xy2 (%15 to %20 faster than mmxext).
Since the _xy2 versions are not bitexact, they are accordingly marked as
approximate.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Handles decoding of new VP9 profiles 1-3 with different color sampling
and bit-depths.
For high bitdepth (profiles 2 and 3) support, we currently need to link
with the highbitdepth branch of libvpx with --enable-experimental
and --enable-vp9-high config options on. But eventually this branch will
be merged into master, whereafter to enable high bitdepth
support you will need to link with libvpx with configure option
--enable-vp9-highbitdepth on.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1274ea8dbaec44355bde07f6bb31fec0c4e6fd2d':
Split off floating point AAN (I)DCT into separate components
Conflicts:
configure
libavcodec/Makefile
libavcodec/dct-test.c
libavcodec/idctdsp.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
