The -hls_allow_cache parameter enables explicitly setting the
EXT-X-ALLOW-CACHE tag in the manifest file. That tag indicates
whether the client MAY or MUST NOT cache downloaded media
segments for later replay.
Valid values are 1 (=YES) or 0 (=NO) and the EXT-X-ALLOW-CACHE
will not show in the manifest for other values (or if
-hls_allow_cache is not used.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
After this the order from the original file is stored through readorder
when doing ffmpeg -i input.ass -c copy output.mkv.
And now that the ASS muxer honors the ReadOrder, extracting the ass back
(without transcoding) restores the original order.
* commit 'c463dfc7e49929a9891884312b23b27d14729c51':
rtpdec_hevc: Drop a duplicated, nonstandard entry
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The RFC spec draft only specifies the "H265" name - there is no
specification saying how to interpret "HEVC" (if such a packet
format is specified it could be an entirely different format).
Since this is a very new standard (still a draft), there is little
need for compatibility with existing, broken implementations. Therefore
remove the extra alias, to avoid the risk of encouraging incorrect
usage.
Intentionally keeping the ff_hevc_dynamic_handler name for the
handler, to use "hevc" consistently as name for the codec instead
of "h265" within the library internals as long as there only is one
single variant in actual use.
Signed-off-by: Martin Storsjö <martin@martin.st>
Considering the palette is located at the end of extradata may be flawed
when the extradata contains the palette followed by the BottomUp field.
When the BottomUp field is present, exclude it from the palette.
Fixes part of ticket #1304
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Before this commit, the code was muxing up to the 2nd line after
"[Events]" (assuming it to be the "Format:" line). The remaining are
generally "Comment:" directives which can stay in that place. mkvextract
behaves that way so it seems there is no reason for that extra
complexity.
Consider a file created with something like:
cat file1.mp3 file2.mp3 > result.mp3
Then if file2.mp3 has gapless information, result.mp3 would stop playing
something in the middle. This happens because the gapless info directs
the decoder to discard all samples after a certain position. To make
matters worse, the gapless info of file2.mp3 will be used when playing
the file1.mp3 part, because the gapless info is located at the end of
the file.
While handling concatenated gapless files correctly would be insane and
a lot of effort (especially without scanning the whole file on opening),
it's easy to prevent at least early EOF. Playback will happen to work,
even if it's slightly broken.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The code already had skipping of initial padding, but discarding
trailing frame padding was missing.
This is somewhat questionable, because it will make the decoder discard
any data after the declared file size in the LAME header. But note that
skipping full frames at the end of the stream is required. Encoders
actually create such files.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
As suggested, this just adds _DEFAULT_SOURCE while preserving
_SVID_SOURCE for whatever old systems still need it.
Signed-off-by: Daniel Bomar <dbdaniel42@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2bb2c2bd75e5f4b28a945511cda77e0a1a44c758':
rtpenc_chain: Pass the initial time_base hint on to the chained muxer
See: [FFmpeg-devel] [PATCH] avformat/rtpenc_chain: Set timebase
Merged-by: Michael Niedermayer <michaelni@gmx.at>
In practice this hint is ignored - the rtp muxer always overwrites
the stream time base without taking the hint into account. But as
a general practice this is the correct way to pass a time base hint
on to a chained muxer.
This avoids warnings about using the codec time base as hint
being deprecated.
Signed-off-by: Martin Storsjö <martin@martin.st>
The size variable is (correctly) unsigned, but is passed to several functions
which take signed parameters, such as avio_read, sometimes after having
numbers added to it. So ensure that size remains within the bounds that
these functions can handle.
CC: libav-stable@libav.org
Signed-off-by: Diego Biurrun <diego@biurrun.de>
It appears this breaks build with MSVC
until someone who has MSVC setup has time to investigate and
workaround/fix this, its better to revert so that build is not broken
Thats even more so as the original commit only fixed a hypothetical issue
This reverts commit e587a428d7.
This adds a new option -hls_flags single_file that creates one .ts file
for HLS and adds byteranges to the .m3u8 file, instead of creating one
.ts file for each segment.
This is helpful at least for storing large number of videos, as the
number of files per video is drastically reduced and copying and storing
those files takes less requests and inodes.
This is based on work by Nicolas Martyanoff, discussed on ffmpeg-devel
in July 2014. That patch seems abandoned by the author, and contained
unrelated changes. This patch tries to add the minimum amount of code to
support the byterange playlists.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes Ticket3901
the seek test error codes change due to a change in the failure path,
this could be avoided by changing the respective error codes to EINVAL
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
bmp pipe needs the bmp parser which is not bug free and should thus not be favored
over the bmp image2 demuxer
that also means this change could be reverted in case bmp pipe is improved so it
handles all single bmp images correctly
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Previously, the returned error codes were intentionally ignored
(see fadd3a6821), to avoid aborting if the directory already
existed. If the mkdir actually failed, this was caught when
opening files within the directory fails anyway.
By handling the error code here (but explicitly ignoring EEXIST),
the error messages and return codes in these cases are more
appropriate and less confusing.
Signed-off-by: Martin Storsjö <martin@martin.st>
Use the UTF-16 BOM to detect UTF-16 encoding. Convert the file contents
to UTF-8 on the fly using FFTextReader, which acts as converting wrapper
around AVIOContext. It also can work on a static buffer, needed for
format probing. The FFTextReader wrapper now also takes care of skipping
the UTF-8 BOM.
Fix Ticket #3496.
* commit '4d55e9de27894ddfb337b28cd7aa6d14a12666d2':
vc1: Split bits used in libavformat into a separate header
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
from the flv spec, the flvtag define the tagtype as one byte,
the spec desc is:
Reserved UB[2] Reserved for FMS, should be 0
Filter UB[1] Indicates if packets are filtered.
0 = No pre-processing required.
1 = Pre-processing (such as decryption) of the packet is
required before it can be rendered.
Shall be 0 in unencrypted files, and 1 for encrypted
tags.
See Annex F. FLV Encryption for the use of filters.
TagType UB[5] Type of contents in this tag. The following types are
defined:
8 = audio
9 = video
18 = script data
Signed-off-by: Steven Liu <qi.liu@chinacache.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes reading from freed data
Fixes part of Ticket3539
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This avoids having to assign oformat, allows returning the
correct error code and allocates priv_data
Based on patch by: Mika Raento <mika.raento@elisa.fi>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The read_packet callback passes a pointer to a stack-allocated AVPacket.
Attempting to free it with av_free() makes no sense.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* cehoyos/master:
lavf/rtpdec_hevc: Fix compilation with -DDEBUG.
ffmpeg: Clean up if filter initialisation failed to avoid a memleak.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '4d686fb721b485ebbc4c7779d927d876c1e630f7':
matroskaenc: convert avstream stereo3d side data during encoding
Conflicts:
libavformat/matroskaenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Convert the Matroska stereo format to the Stereo3D format, and add a
Stereo3D side data to the stream.
Bump the doctype version supported.
Bug-Id: 728 / https://bugs.debian.org/757185
Setting the pointer to NULL inside both ftp_send_command
and ftp_features is redundant. Generally always setting to
NULL in ftp_send_command seems safer, but throughout the file
that parameter was always passed initialized. So I do it here
too for consistency.
Should fix CID1231988 (RESOURCE_LEAK)
OKed-by: Lukasz Marek <lukasz.m.luki2@gmail.com>
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Ensure that cues_start and cues_end are always initialized and
the webm_dash_manifest_cues function returns appropriate error if
they are not computed correctly.
This fixes coverity defect CID1231991.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b263f8ffe7599d9cd27ec477a12700da8eb2790d':
lavf: add AVFormatContext.max_ts_probe
Conflicts:
doc/APIchanges
libavformat/avformat.h
libavformat/utils.c
libavformat/version.h
lavf-fate/mp3 changes as the estimated input bitrate changes and that is
copied to the output
Merged-by: Michael Niedermayer <michaelni@gmx.at>
If the remote end of a connection oriented socket hangs up, generating
an EPIPE error is preferable over an unhandled SIGPIPE signal.
Signed-off-by: Martin Storsjö <martin@martin.st>
* cehoyos/master:
fate: Fix ffprobe tests with --target-path set.
doc/ffmpeg: Try to clarify that the input option -r is not the same as -framerate.
Do not print a useless error number if mov header reading fails.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f9f34cb9983ec6f4ef119c34b726d3b39c143110':
ogg: Use separate classes for the aliases
Conflicts:
libavformat/oggenc.c
See: 2ccc6ff03a
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '051aadeed104ecbe8ee4850ec2d7e5394f5e1ccd':
ogg: Provide aliases for Speex, Opus and audio-only ogg
Conflicts:
Changelog
libavformat/oggenc.c
libavformat/version.h
See: 2ccc6ff03a
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '4d6c5152849e23a4cc0f6a6ac2880c01ebcd301b':
electronicarts: do not fail on zero-sized chunks
Conflicts:
libavformat/electronicarts.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
At least one FATE sample contains such chunks and happens to work simply
by accident (due to find_stream_info() swallowing the error).
CC: libav-stable@libav.org
The messages regarding the recommended use of bitstream filters are somewhat different.
This also adds the ":v" stream specifier to "-bsf h264_mp4toannexb".
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '86dfcfd0e30d6645eea2c63c1c60a0550e7c97ea':
mov: Drop unused parameter from ff_mov_read_esds()
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Fixes ticket #3862.
As a side effect, this also fixes aac_latm in wav.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The AAF SDK refers to these ULs as Legacy. These ULs are the same as the
ones found in FFmbc's version of mxf.c and the ones found in libMXF
Fixes Ticket#1554, Ticket#3100 and Ticket#3450
The current code would use any unknown attribute-value pair
as the cookie value.
RFC 6265 states that the first key-value pair is the actual
cookie, and the attribute-value pairs only start after.
With the current code:
Set-Cookie: test=good_value; path=/; dummy=42
gives this:
Cookie: dummy=42
instead of this with the new code:
Cookie: test=good_value
Update mxf_set_audio_pts to use the container-provided information.
The UL is marked as "to be changed in the future", but the current
samples in the wild do use it.
