* qatar/master:
avconv: fix a segfault on -c copy with -filter_complex.
isom: Support more DTS codec identifiers.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
matroska: Clear prev_pkt between seeks.
avutil: change default buffer size alignment for sample buffer functions
audemux: Add a sanity check for the number of channels
Remove libdirac decoder.
matroska: Add incremental parsing of clusters.
avconv: fix off by one check in complex_filter
mpegts: Try seeking back even for nonseekable protocols
swscale: K&R formatting cosmetics (part III)
Conflicts:
configure
doc/general.texi
doc/platform.texi
ffmpeg.c
libavcodec/Makefile
libavcodec/allcodecs.c
libavcodec/libdirac.h
libavcodec/libdiracdec.c
libavformat/au.c
libavformat/mpegts.c
libswscale/input.c
tests/ref/seek/lavf_mkv
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The new incremental parser doesn't always clear prev_pkt,
however the packet queue is cleared when seeking. Which leads
to a use-after-free.
Verified using Valgrind.
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
Reduces the amount of upfront data required for cluster parsing
thus decreasing latency on seek and startup.
The change in the seek-lavf_mkv FATE test is due to incremental
parsing no longer reading as much data as the old parser and
thus not having that additional data to generate index entries
based on keyframes. Index entries are added correctly as the
file is parsed.
All FATE tests pass and Chrome has been using this patch for ~6
months without issue.
Currently incremental parsing is not supported for files with
SSA tracks since they require merging packets between clusters.
In this case the code falls back to non-incremental parsing.
Signed-off-by: Aaron Colwell <acolwell@chromium.org>
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The mpegts demuxer reads 5 KB at startup just for discovering
the packet size. Since the default avio buffer size is 32 KB,
the seek back to the start will in most cases be within the
avio buffer, and will in most cases succeed even if the actual
protocol isn't seekable.
This makes the demuxer startup faster/with less data when
reading data from a non-seekable input, by not skipping
the first few KB.
If it fails, don't warn if the protocol isn't seekable, making
it behave as before in the failure case.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
ARM: allow runtime masking of CPU features
dsputil: remove unused functions
mov: Treat keyframe indexes as 1-origin if starting at non-zero.
mov: Take stps entries into consideration also about key_off.
Remove lowres video decoding
Conflicts:
ffmpeg.c
ffplay.c
libavcodec/arm/vp8dsp_init_arm.c
libavcodec/libopenjpegdec.c
libavcodec/mjpegdec.c
libavcodec/mpegvideo.c
libavcodec/utils.c
libavformat/mov.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This fixes a null ptr dereference with attachments
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
avcodec: remove AVCodecContext.dsp_mask
avconv: fix a segfault when default encoder for a format doesn't exist.
utvideo: general cosmetics
aac: Handle HE-AACv2 when sniffing a channel order.
movenc: Support high sample rates in isomedia formats by setting the sample rate field in stsd to 0.
xxan: Remove write-only variable in xan_decode_frame_type0().
ivi_common: Initialize a variable at declaration in ff_ivi_decode_blocks().
Conflicts:
ffmpeg.c
libavcodec/utvideo.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
avcodec: add a cook parser to get subpacket duration
FATE: allow lavf tests to alter input parameters
FATE: replace the acodec-pcm_s24daud test with an enc_dec_pcm checksum test
FATE: replace the acodec-g726 test with 4 new encode/decode tests
FATE: replace current g722 encoding tests with an encode/decode test
FATE: add a pattern rule for generating asynth wav files
FATE: optionally write a WAVE header in audiogen
avutil: add audio fifo buffer
Conflicts:
doc/APIchanges
libavcodec/version.h
libavutil/avutil.h
tests/Makefile
tests/codec-regression.sh
tests/fate/voice.mak
tests/lavf-regression.sh
tests/ref/acodec/g722
tests/ref/acodec/g726
tests/ref/acodec/pcm_s24daud
tests/ref/lavf/dv_fmt
tests/ref/lavf/gxf
tests/ref/lavf/mxf
tests/ref/lavf/mxf_d10
tests/ref/seek/lavf_dv
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
dv: Initialize encoder tables during encoder init.
dv: Replace some magic numbers by the appropriate #define.
FATE: pass the decoded output format and audio source file to enc_dec_pcm
FATE: specify the input format when decoding in enc_dec_pcm()
x86inc: support AVX abstraction for 2-operand instructions
configure: detect PGI compiler and set suitable flags
avconv: check for an incompatible changing channel layout
avio: make AVIOContext.av_class pointer to const
nutdec: add malloc check and fix const to non-const conversion warnings
Conflicts:
ffmpeg.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Fix this warning:
libavformat/aviobuf.c:663:20: warning: assignment discards qualifiers from pointer target type
Although this is a public header, it should remain source and
binary compatible.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master:
ppc: drop unused function dct_quantize_altivec()
mpegaudiodec: Do not discard mp_decode_frame() return value.
matroska: do not set invalid default duration if frame rate is zero
mkv: use av_reduce instead of av_d2q for framerate estimation
mkv: report average framerate as minimal as well
avcodec_string: Favor AVCodecContext.codec over the default codec.
cook: Make constants passed to AV_BE2NE32C() unsigned to avoid signed overflow.
Conflicts:
libavcodec/cook.c
libavcodec/ppc/mpegvideo_altivec.c
libavcodec/utils.c
libavformat/matroskadec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
If a video track specifies a zero frame rate (invalid but occurs),
this results in a division by zero and subsequent undefined conversion
to integer. Setting the default duration from the frame rate only
if the latter is greater than zero avoids such problems.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master:
aacenc: Fix issues with huge values of bit_rate.
dv_tablegen: Drop unnecessary av_unused attribute from dv_vlc_map_tableinit().
proresenc: multithreaded quantiser search
riff: use bps instead of bits_per_coded_sample in the WAVEFORMATEXTENSIBLE header
avconv: only set the "channels" option when it exists for the specified input format
avplay: update get_buffer to be inline with avconv
aacdec: More robust output configuration.
faac: Fix multi-channel ordering
faac: Add .channel_layouts
rtmp: Support 'rtmp_playpath', an option which overrides the stream identifier
rtmp: Support 'rtmp_app', an option which overrides the name of application
avutil: add better documentation for AVSampleFormat
Conflicts:
libavcodec/aac.h
libavcodec/aacdec.c
libavcodec/aacenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Other cases are not supported and lead to inconsistencies which
can lead to out of array writes.
Reported-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This replaces the matroskadec one with the same name.
The advantage is not only easier reuse in other demuxers
but also that we can make the decisions after the parser.
This fixes seeking in files that mark the keyframes incorrectly,
for example the file in track ticket #1003.
The matroska variable is still kept to be able to complain
about such broken files.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
This option is the stream identifier to play or to publish.
Sometimes the URL parser cannot determine the correct
playpath automatically, so it must be given explicitly
using this option (ie. -rtmp_playpath).
Signed-off-by: Martin Storsjö <martin@martin.st>
This option is the name of application to connect on the RTMP server.
Sometimes the URL parser cannot determine the app name automatically,
so it must be given explicitly using this option (ie. -rtmp_app).
Signed-off-by: Martin Storsjö <martin@martin.st>
The new values lead to error messages when used
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Instead of allocating over the original, free first. MOVStreamContext
is zero initialized so no double free will occur. Same style as other
fixes for the same problem in this file.
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* qatar/master:
vsrc_buffer: fix check from 7ae7c41.
libxvid: Reorder functions to avoid forward declarations; make functions static.
libxvid: drop some pointless dead code
wmal: vertical alignment cosmetics
wmal: Warn about missing bitstream splicing feature and ask for sample.
wmal: Skip seekable_frame_in_packet.
wmal: Drop unused variable num_possible_block_size.
avfiltergraph: make the AVFilterInOut alloc/free API public
graphparser: allow specifying sws flags in the graph description.
graphparser: fix the order of connecting unlabeled links.
graphparser: add avfilter_graph_parse2().
vsrc_buffer: allow using a NULL buffer to signal EOF.
swscale: handle last pixel if lines have an odd width.
qdm2: fix a dubious pointer cast
WMAL: Do not try to read rawpcm coefficients if bits is invalid
mov: Fix detecting there is no sync sample.
tiffdec: K&R cosmetics
avf: has_duration does not check the global one
dsputil: fix optimized emu_edge function on Win64.
Conflicts:
doc/APIchanges
libavcodec/libxvid_rc.c
libavcodec/libxvidff.c
libavcodec/tiff.c
libavcodec/wmalosslessdec.c
libavfilter/avfiltergraph.h
libavfilter/graphparser.c
libavfilter/version.h
libavfilter/vsrc_buffer.c
libswscale/output.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
0-sized packets are used to implement variable fps.
However there seems to be a variation where these are not
even stored in the main file but as 0-size index entries
only.
This fixes the sample in trac issue #957, it now plays both
the same ways as in MPlayer and in a way that looks correct.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
They will only cause us to skip writing the Xing header,
not cause any serious breakage.
Related to trac issue #1027.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* qatar/master:
swscale: K&R formatting cosmetics (part II)
tiffdec: Add a malloc check and refactor another.
faxcompr: Check malloc results and unify return path
configure: escape colons in values written to config.fate
ac3dsp: call femms/emms at the end of float_to_fixed24() for 3DNow and SSE
matroska: Fix leaking memory allocated for laces.
pthread: Fix crash due to fctx->delaying not being cleared.
vp3: Assert on invalid filter_limit values.
h264: fix 10bit biweight functions after recent x86inc.asm fixes.
ffv1: Fix size mismatch in encode_line.
movenc: Remove a dead initialization
git-howto: Explain how to avoid Windows line endings in git checkouts.
build: Move all arch OBJS declarations into arch subdirectory Makefiles.
Conflicts:
configure
libavcodec/vp3.c
libavformat/matroskadec.c
libavutil/Makefile
libswscale/Makefile
libswscale/swscale.c
libswscale/swscale_internal.h
libswscale/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Its bad to free things without zeroing them.
This fixes a potential issue when mov_read_close() would be called twice.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
If mov_read_header exits under error, the memory allocated is
not freed.
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
During error conditions matroska_parse_block may exit without
freeing the memory allocated for laces.
Found via valgrind: http://pastebin.com/E54k8QFU
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Convert key_off initialize to use the same sc->keyframe_count as
used elsewhere in the function.
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
During error conditions matroska_parse_block may exit without
freeing the memory allocated for laces.
Found via valgrind: http://pastebin.com/E54k8QFU
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Fixes potential out-of-bounds writes.
This is mostly possible when muxing ALS files where from
an extradata size of about 1050 put_bits would write data
outside the buffer.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
For the FATE test sample used, this only avoids a warning
message.
However for other samples like al05_44.mp4 the converted
file can be played only after this fix.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
This will only work for DSEs that are first in a packet, but
that is enough to fix handling of the reference files in
fate-suite/aac (though most of them still have other issues).
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Otherwise for muxers like e.g. latmenc that never call
avio_flush (and do not have a write_trailer function)
a part of the data will always be missing.
Also update references for the voc muxer, which was also
buggy before and did not write out all data.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* qatar/master:
avplay: Don't free video filters string until the end of decoding.
movenc: small refactor mov_write_packet
movenc: remove redundant check
interplayvideo: fix av_dlog parameter type mismatch
Drop some pointless #ifdefs.
Conflicts:
libavcodec/interplayvideo.c
libavcodec/libxvidff.c
libavcodec/snowenc.c
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Previously it would just silently write out incorrect data.
This also fixes a potential integer overflow in the allocation.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
"Fix" in so far as at least it will no longer overread and possibly
crash and makes somewhat sense, but no idea whether there is anything
that can play the resulting files (FFmpeg can't).
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Share the formerly internal write_packet with the hinter and move the
fragment flush logic to the user facing one since it is not concerned
about movtrack-only streams.
Fixes bug #263
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master: (22 commits)
rv40dsp x86: use only one register, for both increment and loop counter
rv40dsp: implement prescaled versions for biweight.
avconv: use default channel layouts when they are unknown
avconv: parse channel layout string
nutdec: K&R formatting cosmetics
vda: Signal 4 byte NAL headers to the decoder regardless of what's in the extradata
mem: Consistently return NULL for av_malloc(0)
vf_overlay: implement poll_frame()
vf_scale: support named constants for sws flags.
lavc doxy: add all installed headers to doxy groups.
lavc doxy: add avfft to the main lavc group.
lavc doxy: add remaining avcodec.h functions to a misc doxygen group.
lavc doxy: add AVPicture functions to a doxy group.
lavc doxy: add resampling functions to a doxy group.
lavc doxy: replace \ with /
lavc doxy: add encoding functions to a doxy group.
lavc doxy: add decoding functions to a doxy group.
lavc doxy: fix formatting of AV_PKT_DATA_{PARAM_CHANGE,H263_MB_INFO}
lavc doxy: add AVPacket-related stuff to a separate doxy group.
lavc doxy: add core functions/definitions to a doxy group.
...
Conflicts:
ffmpeg.c
libavcodec/avcodec.h
libavcodec/vda.c
libavcodec/x86/rv40dsp.asm
libavfilter/vf_scale.c
libavformat/nutdec.c
libavutil/mem.c
tests/ref/acodec/pcm_s24daud
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
rtsp: Don't use av_malloc(0) if there are no streams
rtsp: Don't use uninitialized data if there are no streams
vaapi: mpeg2: fix slice_vertical_position calculation.
hwaccel: mpeg2: decode first field, if requested.
cosmetics: Fix indentation
rtsp: Don't expose the MS-RTSP RTX data stream to the caller
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This avoids exposing a dummy AVStream which won't get any data
and which will make avformat_find_stream_info wait for info about
this stream.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
rtpdec_asf: Set the no_resync_search option for the chained asf demuxer
asfdec: Add an option for not searching for the packet markers
cosmetics: Clean up the tiffenc pix_fmts declaration to match the style of others
cosmetics: Align codec declarations
cosmetics: Convert mimic.c to utf-8
avconv: remove an unused function parameter.
avconv: remove now pointless variables.
avconv: drop support for building without libavfilter.
nellymoserenc: fix crash due to memsetting the wrong area.
libavformat: Only require first packet to be known for audio/video streams
avplay: Don't try to scale timestamps if the tb isn't set
Conflicts:
Changelog
configure
ffmpeg.c
libavcodec/aacenc.c
libavcodec/bmpenc.c
libavcodec/dnxhddec.c
libavcodec/dnxhdenc.c
libavcodec/ffv1.c
libavcodec/flacenc.c
libavcodec/fraps.c
libavcodec/huffyuv.c
libavcodec/libopenjpegdec.c
libavcodec/mpeg12enc.c
libavcodec/mpeg4videodec.c
libavcodec/pamenc.c
libavcodec/pgssubdec.c
libavcodec/pngenc.c
libavcodec/qtrleenc.c
libavcodec/rawdec.c
libavcodec/sgienc.c
libavcodec/tiffenc.c
libavcodec/v210dec.c
libavcodec/wmv2dec.c
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The format is slightly proprietary.
DVDs use a format of
code byte (0x00, 0x01, 0xfe or 0xff), two data bytes
MOV uses instead
cdat/cdt2 atom, two data bytes
Auto-detecting and supporting both in one decoder is trivial,
so a single codec ID is used.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Searching for packet markers doesn't make sense for this use case,
where packets are fed one at a time to the demuxer.
This fixes playing back streams that have packets not starting
with the 0x82, 0x00, 0x00 marker.
Signed-off-by: Martin Storsjö <martin@martin.st>
It can take a long time before subtitles or data streams show up,
so we shouldn't wait for those before assuming we have all info
for streams.
Signed-off-by: Martin Storsjö <martin@martin.st>
Also add missing trailing commas, break long codec_tag lines and
add spaces in codec_tag declarations.
Signed-off-by: Martin Storsjö <martin@martin.st>
The correct point that seperates ISO and MAC language codes is 0x400
according to the current QT spec. Old QT specs did not list where this
seperation is but apparently only defined the meaning of the first 137.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The handler name is stored as a pascal string in the QT specs (first
byte is the length of the string), thus leading to an invalid metadata
string export.
Also add a second length check based on the first character to avoid
overwriting an already specified handler_name (it happens with Youtube
videos for instance, the handler_name get masked), or specifying an
empty string metadata.
To reproduce the problem, using ffprobe:
./ffprobe -show_packets -print_format compact -fflags +genpts -i
fate_samples/mxf/C0023S01.mxf
You will notice that the last video frame does not have it's PTS being
set, even with using genpts.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Allows avoiding the buffer when using avio read, write and seek functions.
When using the ffmpeg executable -avioflags direct can be used to enable
this mode for input files, but has no effect on output files.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
The reason for this is that such files have IndexTableSegments which when parsed
cover EditUnit ranges like this:
[0,1)
[249,250)
[249,377)
[0,249)
where each interval is [IndexStartPosition,IndexStartPosition+IndexDuration).
This would be reduced to a sparse index like:
[0,1), [249,250)
instead of the full range:
[0,249), [249,377)
See TimeCode_HD.mxf, UMID =
060a2b340101010101010410130000000004001aa0e59175025b2a5600da4101.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The audio codecs property is composed by all values except
SUPPORT_SND_INTEL (0x0008) and SUPPORT_SND_UNUSED (0x0010) which are
unused.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* qatar/master:
vsrc_buffer: allow buffering arbitrary number of frames.
vf_scale: avoid a pointless memcpy in no-op conversion.
avfiltergraph: try to reduce format conversions in filters.
avfiltergraph: add an AVClass to AVFilterGraph on next major bump.
id3v2: fix skipping extended header in id3v2.4
Conflicts:
libavfilter/vf_scale.c
libavfilter/vsrc_buffer.c
libavformat/id3v2.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
apedec: check bits <= 32.
cavs: Remove unused code.
oggenc: fix condition when not to flush due to keyframe granule.
oggenc: add pagesize option to set preferred page size
libspeexdec: set frame size in libspeex_decode_init()
smacker audio: sign-extend the initial 16-bit predicted value
Conflicts:
libavcodec/apedec.c
libavcodec/libspeexdec.c
libavformat/oggenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This fixes crashes when copying a data track as in trac
issue #236.
No proper timecode tracks will be written though.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
This patch fixes the sample from trac issue #522.
The issue is that the mov demuxer insists on using its
calculated sample_size (which is nonsense for old-style tracks)
instead of the one encoded in the track.
The old raw audio code should be using the value in stsz, because
the size of a single sample never makes sense for the size of
a full audio packet, whereas the new code will multiply the
sample size by the chunk size, so it should use the calculated value.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
This patch fixes the sample from trac issue #733.
The issue is that the size of the trak elements is coded
too large, so that the next trak element would be parsed
as part of the first and truncated incorrectly.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
The previous condition of 0 page size was wrong,
that would disable the mechanism for all frames at
a start of a page, thus some keyframes still would not
get their own granule.
The real problem is that header packets must not be flushed,
but they have (and must have) 0 granule and thus would
be detected as keyframes.
Add a separate parameter to mark header packets.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
When set, if an Ogg stream buffer has enough data, a page is made
instead of filling maximum-size pages. Using smaller pages results
smaller seek intervals at the expense of higher container overhead.
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
* qatar/master:
h264: drop ff_h264_ prefix from static function ff_h264_decode_rbsp_trailing()
h264: Make ff_h264_decode_end() static, it is not used externally.
output-example: K&R formatting cosmetics, comment spelling fixes
avf: make the example output the proper message
avf: fix audio writing in the output-example
mov: don't overwrite existing indexes.
lzw: fix potential integer overflow.
truemotion: forbid invalid VLC bitsizes and token values.
truemotion2: handle out-of-frame motion vectors through edge extension.
configure: Check for a different SDL function
Conflicts:
configure
doc/examples/muxing.c
libavcodec/truemotion2.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
mp3dec: perform I/S and M/S only when frame mode is joint stereo.
id3v2: add another mimetype for JPEG image
lzw: prevent buffer overreads.
WMAL: Remove inaccurate and unnecessary doxy
h264: fix cabac-on-stack after safe cabac reader.
truemotion2: convert packet header reading to bytestream2.
Conflicts:
libavcodec/lzw.c
libavcodec/truemotion2.c
libavformat/id3v2.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
tilde expansion should/can be done by the shell
Reviewed-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This changes globbing support to only be used if the character
contains at least one glob meta character that is preceded by
an unescaped %. To escape a literal % one would use %% which is
identical to the way to match a % with image2 sequence generation
feature.
* Makes it possible to have patterns like %04d-[720p].jpg work
again with sequence number generation. Previously this would
always be detected as a glob pattern and was interpreted by
the image2 glob code instead.
* Makes it possible to use %*-[720p].jpg to match above pattern
without having to double escape it to be not interpreted by most
shells and not by the image2 glob code (previously one would
need to use \*-\\\[720p\\\].jpg to achieve the same)
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
asf: only set index_read if the index contained entries.
cabac: add overread protection to BRANCHLESS_GET_CABAC().
cabac: increment jump locations by one in callers of BRANCHLESS_GET_CABAC().
cabac: remove unused argument from BRANCHLESS_GET_CABAC_UPDATE().
cabac: use struct+offset instead of memory operand in BRANCHLESS_GET_CABAC().
h264: add overread protection to get_cabac_bypass_sign_x86().
h264: reindent get_cabac_bypass_sign_x86().
h264: use struct offsets in get_cabac_bypass_sign_x86().
h264: fix overreads in cabac reader.
wmall: fix seeking.
lagarith: fix buffer overreads.
dvdec: drop unnecessary dv_tablegen.h #include
build: fix doc generation errors in parallel builds
Replace memset(0) by zero initializations.
faandct: Remove FAAN_POSTSCALE define and related code.
dvenc: print allowed profiles if the video doesn't conform to any of them.
avcodec_encode_{audio,video}: only reallocate output packet when it has non-zero size.
FATE: add a test for vp8 with changing frame size.
fate: add kgv1 fate test.
oggdec: calculate correct timestamps in Ogg/FLAC
Conflicts:
libavcodec/4xm.c
libavcodec/cook.c
libavcodec/dvdata.c
libavcodec/dvdsubdec.c
libavcodec/lagarith.c
libavcodec/lagarithrac.c
libavcodec/utils.c
tests/fate/video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Version from vqa header does not dictate which sound chunks may
appear in file.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
* qatar/master:
make av_interleaved_write_frame() flush packets when pkt is NULL
mpegts: Fix dead error checks
vc1: Do not read from array if index is invalid.
targa: convert to bytestream2.
rv34: set mb_num_left to 0 after finishing a frame
Conflicts:
libavcodec/targa.c
libavcodec/vc1data.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This patch allows the user to force flushing of all queued packets
by calling av_interleaved_write_frame() with pkt set to NULL.
Signed-off-by: Jindrich Makovicka <jindrich.makovicka@nangu.tv>
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
build: ppc: drop stray leftover backslash
build: Only clean the architecture subdirectory we build for.
build: drop some unnecessary dependencies from the H.264 parser
build: prettyprinting cosmetics
libavutil: Remove pointless rational test program.
libavutil: Remove broken and pointless lzo test program.
lavf doxy: expand AVStream.codec doxy.
lavf doxy: improve AVStream.time_base doxy.
lavf doxy: add some basic documentation about reading from the demuxer.
lavf doxy: document passing options to demuxers.
lavf doxy: clarify that an AVPacket contains encoded data.
mpegtsenc: allow user triggered PES packet flushing
APIchanges: mark the place where 0.7 was cut.
APIchanges: mark the place where 0.8 was cut.
APIchanges: fill in missing dates and hashes.
smacker: convert palette and header reading to bytestream2.
alac: convert extradata reading to bytestream2.
Conflicts:
doc/APIchanges
libavcodec/smacker.c
libavcodec/x86/Makefile
libavfilter/Makefile
libavutil/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This depends on the proposed parser change for 0-size packets
in previous mail, otherwise video now plays far too fast.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Currently, the duration of those packets is just discarded
when enabling parsing, thus the output of the Metal Gear Solid
demuxer breaks completely when just setting AVSTREAM_PARSE_HEADERS.
The result will not be correct if a parser creates a delay even
with PARSER_FLAG_COMPLETE_FRAMES and there might be other cases
where it does not work correct, but just discarding them as it
is done currently seems worse.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* qatar/master:
avc: Add a function for converting mp4 style extradata to annex b
pthread: free progress if buffer allocation failed.
lavc/avconv: support changing frame sizes in codecs with frame mt.
libavformat: Document who sets the AVStream.id field
utvideo: mark output picture as keyframe.
sunrast: Add support for negative linesize.
vp8: fix update_lf_deltas in libavcodec/vp8.c
ralf: read Huffman code lengths without GetBitContext
Conflicts:
ffmpeg.c
libavcodec/sunrastenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This isn't exactly equivalent with the earlier code for codecs
other than H264 and VC1, but those are two only codecs supported
by this codepath anyway, and it simplifies it a bit.
Signed-off-by: Martin Storsjö <martin@martin.st>
This prevents a null ptr dereference.
It could be checked differently but this way it should
be possible to return some data.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
xwma: Validate channels and bits_per_coded_sample.
mov: Do not read past the end of the ctts_data table.
mov: Add missing terminator to mov_ch_layout_map_1ch.
asf: reset side data elements on packet copy.
wmavoice: fix stack overread.
wmalossless: error out if a subframe is not used by any channel.
vqa: check palette chunk size before reading data.
wmalossless: reset sample pointer for each subframe.
wmalossless: error out on invalid values for order.
Conflicts:
libavcodec/vqavideo.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
FATE: Add ZeroCodec test
oggparseogm: fix order of arguments of avpriv_set_pts_info().
pngenc: better upper bound for encoded frame size.
aiffdec: set block_duration to 1 for PCM codecs that are supported in AIFF-C
aiffdec: factor out handling of integer PCM for AIFF-C and plain AIFF
aiffdec: use av_get_audio_frame_duration() to set block_duration for AIFF-C
aiffdec: do not set bit rate if block duration is unknown
wmall: output packet only if we have decoded some samples
Conflicts:
libavcodec/pngenc.c
tests/fate/lossless-video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Version from vqa header does not dictate which sound chunks may
appear in file.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (27 commits)
avconv: free packet in write_frame() when discarding due to frame number limit
FATE: use +/- flag option syntax for vp8 emu-edge tests
lavf: make av_interleave_packet_per_dts() private.
lavf: deprecate av_read_packet().
oggdec: output correct timestamps for Vorbis
avconv: pass input stream timestamps to audio encoders
lavc: shrink encoded audio packet size after encoding.
xa: set correct bit rate
xa: do not set bit_rate, block_align, or bits_per_coded_sample
xa: fix end-of-file handling
xa: fix timestamp calculation
bink: fix typo in FFALIGN() argument
bink: align plane width to 8 when calculating bundle sizes
doc: pass -Idoc texi2html and texi2pod
doc: texi2pod: add -I flag
movenc: Add a min_frag_duration option
rtsp: Set the default delay to 0.1 s for the RTSP/SDP/RTP demuxers
libavformat: Set the default for the max_delay option to -1
Generate manpages for AV{Format,Codec}Context AVOptions.
doc/avconv: remove entries for AVOptions.
...
Conflicts:
doc/Makefile
doc/ffmpeg.texi
doc/muxers.texi
ffmpeg.c
libavcodec/Makefile
libavcodec/options.c
libavcodec/vp8.c
libavformat/options.c
tests/fate/demux.mak
tests/ref/fate/truemotion1-15
tests/ref/fate/truemotion1-24
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Takes encoder delay into account by comparing first the coded page
duration with the calculated page duration. Handles last packet duration
if needed, also by comparing coded duration with calculated duration.
Also does better handling of timestamp generation for packets in the
first page for streamed ogg files where the start time is not
necessarily zero.
The other fragmentation options (frag_duration, frag_size and
frag_keyframe) are combined with OR, cutting fragments at the
first of the conditions being fulfilled.
Signed-off-by: Martin Storsjö <martin@martin.st>
Make the muxers/demuxers that use the field handle the default
-1 in the same way as 0.
This allows distinguishing an intentionally set 0 from the default
value where the user hasn't set it.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master: (35 commits)
fix space type in Changelog
ZeroCodec Decoder
RealAudio Lossless decoder
rtpenc: Use AVFormatContext.packet_size instead of a private option
url: Document the expected behaviour of url_read
libavformat: Use AVFormatContext.probesize in init_input
docs: Fix a stray reference to tags in the generic doxy on dicts
cosmetics: Align some AVInput/OutputFormat declarations
zmbv: check decompress result
zmbv: correct indentation
adpcm: convert adpcm_thp to bytestream2.
adpcm: convert adpcm_yamaha to bytestream2.
adpcm: convert adpcm_swf to bytestream2.
adpcm: convert adpcm_sbpro to bytestream2.
adpcm: convert adpcm_ct to bytestream2.
adpcm: convert adpcm_ima_amv/smjpeg to bytestream2.
adpcm: convert adpcm_ea_xas to bytestream2.
adpcm: convert adpcm_ea_r1/2/3 to bytestream2.
adpcm: convert ea_maxis_xa to bytestream2.
adpcm: convert adpcm_ea to bytestream2.
...
Conflicts:
Changelog
libavcodec/Makefile
libavcodec/adpcm.c
libavcodec/allcodecs.c
libavcodec/avcodec.h
libavcodec/version.h
libavcodec/zerocodec.c
libavcodec/zmbv.c
libavformat/riff.c
libavformat/url.h
tests/ref/fate/truemotion1-15
tests/ref/fate/truemotion1-24
Merged-by: Michael Niedermayer <michaelni@gmx.at>
An obscure Japanese lossless video codec, originally intended
for use with a remote desktop application.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
The private option has not been part of any release yet (and
it is only of use in quite rare cases), so just remove it instead
of keeping it with deprecation warnings.
Signed-off-by: Martin Storsjö <martin@martin.st>
This was forgotten in the transition from av_open_input_file to
avformat_open_input, see 603b8bc2a1.
This doesn't change anything for the default case where the
option isn't set, since PROBE_BUF_MAX is 1048576 (which was
used as max probe size earlier) while the default value for
the probesize option is 5000000, which for the probe function
is clipped to PROBE_BUF_MAX anyway.
Signed-off-by: Martin Storsjö <martin@martin.st>
An obscure Japanese lossless video codec, originally intended
for use with a remote desktop application.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
fate: make compare() function compatible with POSIX bc
Update Janne's email address.
APIchanges: Replace Subversion revision numbers by Git hashes.
bytestream: Eliminate one level of pointless macro indirection.
xwd: convert to bytestream2.
vqavideo: port to bytestream2 API
Read preset files with suffix .avpreset
prores: allow user to set fixed quantiser
lavf: remove some disabled code.
lavf: only set average frame rate for video.
lavf: remove a pointless check.
avcodec: add XBM encoder
Conflicts:
Changelog
cmdutils.c
cmdutils.h
doc/APIchanges
libavcodec/Makefile
libavcodec/avcodec.h
libavcodec/version.h
libavcodec/vqavideo.c
libavformat/img2enc.c
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
We can't do this in general since we could be reading a file with B-frames while
lacking an index.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
In non-blocking mode, lowest-level read protocols are
supposed block only for a short amount of time to let
retry_transfer_wrapper() check for interrupts.
Also, checking the interrupt_callback in the receiving thread is
wrong, as interrupt_callback is not guaranteed to be thread-safe
and the job is already done by retry_transfer_wrapper(). The error
code was also incorrect.
Bug reported by Andrey Utkin.
* qatar/master:
dxa: remove useless code
lavf: don't select an attached picture as default stream for seeking.
avconv: remove pointless checks.
avconv: check for get_filtered_frame() failure.
avconv: remove a pointless check.
swscale: convert hscale() to use named arguments.
x86inc: add *mp named argument support to DEFINE_ARGS.
swscale: convert hscale to cpuflags().
Conflicts:
ffmpeg.c
libswscale/x86/scale.asm
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This avoids problems
where avio_tell() returns 0. I've updated all the checks against
cluster_pos
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
doc/general: update supported devices table.
doc/general: add missing @tab to codecs table.
h264: Fix invalid interlaced/progressive MB combinations for direct mode prediction.
avconv: reindent
avconv: link '-passlogfile' option to libx264 'stats' AVOption.
libx264: add 'stats' private option for setting 2pass stats filename.
libx264: fix help text for slice-max-size option.
http: Clear the auth state on redirects
http: Retry auth if it failed due to being stale
rtsp: Resend new keepalive commands if they used stale auth
rtsp: Retry authentication if failed due to being stale
httpauth: Parse the stale field in digest auth
dxva2_vc1: pass the overlap flag to the decoder
dxva2_vc1: fix decoding of BI frames
FATE: add shorthand to wavpack test
dfa: convert to bytestream2 API
anm decoder: move buffer allocation from decode_init() to decode_frame()
h264: improve parsing of broken AVC SPS
Conflicts:
ffmpeg.c
libavcodec/anm.c
libavcodec/dfa.c
libavcodec/h264.c
libavcodec/h264_direct.c
libavcodec/h264_ps.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Allow up to 4 retries for normal requests, where both the
proxy and the target server might need to authenticate.
Signed-off-by: Martin Storsjö <martin@martin.st>
These commands are sent asynchronously, not waiting for the reply.
This reply is parsed later by ff_rtsp_tcp_read_packet or
udp_read_packet. If the reply indicates that we used stale
authentication and need to use a new nonce, resend a new keepalive
command immediately.
This is the only request sent asynchronously, so currently there's
no other command that needs to be resent in the same way.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
pcm-mpeg: convert to bytestream2 API
Revert "h264: clear trailing bits in partially parsed NAL units"
remove iwmmxt optimizations
mimic: do not continue if swap_buf_size is 0
mimic: convert to bytestream2 API
frwu: use MKTAG to check marker instead of AV_RL32
txd: port to bytestream2 API
c93: convert to bytestream2 API
iff: make .long_name more descriptive
FATE: add test for cdxl demuxer
rtsp: Fix a typo
Conflicts:
libavcodec/arm/dsputil_iwmmxt.c
libavcodec/arm/dsputil_iwmmxt_rnd_template.c
libavcodec/arm/mpegvideo_iwmmxt.c
libavcodec/c93.c
libavcodec/txd.c
libavutil/arm/cpu.c
tests/fate/demux.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
According to video_file_format_spec_v10_1.pdf flv stores AAC RAW
thanks to Baptiste Coudurier for pointing that out
thanks to Aℓex Converse for explaining:
This can't be at the start of a non-ADTS payload. 111 is the
EndOfFrame syntax element.
Together these proof that the check was correctly rejecting ADTS which
is not supposed to be in flv. Many players are able to play such ADTS
in flv though but its better if we conform to the spec as this should
ensure that not many but all players can play files generated by ffmpeg.
This reverts commit 3c9a86df0e.
mpjpeg video streamings would break and stop on Firefox after 1 - 30
seconds.
In order to fix this, two changes were made:
1. Replaced all occurrences of '\n' character in mjpeg metadata
with occurences of "\r\n".
2. Added "Content-length: <packet-size>" metadata entry for each
sent frame.
The change has been tested on Google Chrome 17.0.963.78 and Firefox 10.0.2
on lubuntu 11.10 and the streaming seems to work fine now.
* qatar/master:
Fix a bunch of common typos.
build: Skip compiling xvmc.h under the correct condition.
configure: darwin: Change dylib install names to include major version.
mpegts: Always honor a registration descriptor if present and there is no other codec information.
aacdec: Fix SCE parity check.
aacdec: Fix out of array writes (stack).
rtsp: Only set the ttl parameter if the server actually gave a value
udp: Set ttl for read-write streams, too, not only for write-only ones
udp: Only bind to the multicast address if in read-only mode
udp: Clarify the comment about binding the multicast address
udp: Reorder comments
Conflicts:
libavcodec/aacdec.c
tools/patcheck
Merged-by: Michael Niedermayer <michaelni@gmx.at>
With this we can always know if a timestamp is based on added durations
from an unknown origin or if it is based on a correct timestamp (and possibly
added durations)
This should fix some bugs where this distinction was mixed up.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes sending back RTCP RR packets if receiving RTP over
multicast.
If the multicast stream is sent on demand (set up and signalled
via RTSP), the sender might depend on getting RTCP RR packets
knowing that there are listeners, otherwise the stream can be
closed after a certain timeout.
This fixes receiving RTSP streams over multicast on unix, from
certain Axis cameras.
Signed-off-by: Martin Storsjö <martin@martin.st>
When this code was added in 36b532815c, the new code was added
between the existing comment and the existing line of code, making
the old comment seem to refer to the new code. This makes it read
correctly.
Signed-off-by: Martin Storsjö <martin@martin.st>
Fixes trac #1045.
Thanks to Peter Ross for his help with this patch.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The ogg decoder wasn't padding the input buffer with the appropriate
FF_INPUT_BUFFER_PADDING_SIZE bytes. Which led to uninitialized reads in
various pieces of parsing code when they thought they had more data than
they actually did.
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
* qatar/master: (29 commits)
sbrdsp.asm: convert all instructions to float/SSE ones.
dv: cosmetics.
dv: check buffer size before reading profile.
Revert "AAC SBR: group some writes."
udp: Print an error message if bind fails
cook: extend channel uncoupling tables so the full bit range is covered.
roqvideo: cosmetics.
roqvideo: convert to bytestream2 API.
dca: don't use av_clip_uintp2().
wmall: fix build with -DDEBUG enabled.
smc: port to bytestream2 API.
AAC SBR: group some writes.
dsputil: remove shift parameter from scalarproduct_int16
SBR DSP: unroll sum_square
rv34: remove dead code in intra availability check
rv34: clean a bit availability checks.
v4l2: update documentation
tgq: convert to bytestream2 API.
parser: remove forward declaration of MpegEncContext
dca: prevent accessing static arrays with invalid indexes.
...
Conflicts:
doc/indevs.texi
libavcodec/Makefile
libavcodec/dca.c
libavcodec/dvdata.c
libavcodec/eatgq.c
libavcodec/mmvideo.c
libavcodec/roqvideodec.c
libavcodec/smc.c
libswscale/output.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The "ECs != 1 -> OP1a" assumption was wrong. Luckily, the file that triggered
that behavior had two ECs, not zero. Hence distinguishing between them is
simple in this case.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes rare cases where OPAtom may be treated as OP1a, causing all essence
to be read into RAM.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (31 commits)
cdxl demux: do not create packets with uninitialized data at EOF.
Replace computations of remaining bits with calls to get_bits_left().
amrnb/amrwb: Remove get_bits usage.
cosmetics: reindent
avformat: do not require a pixel/sample format if there is no decoder
avformat: do not fill-in audio packet duration in compute_pkt_fields()
lavf: Use av_get_audio_frame_duration() in get_audio_frame_size()
dca_parser: parse the sample rate and frame durations
libspeexdec: do not set AVCodecContext.frame_size
libopencore-amr: do not set AVCodecContext.frame_size
alsdec: do not set AVCodecContext.frame_size
siff: do not set AVCodecContext.frame_size
amr demuxer: do not set AVCodecContext.frame_size.
aiffdec: do not set AVCodecContext.frame_size
mov: do not set AVCodecContext.frame_size
ape: do not set AVCodecContext.frame_size.
rdt: remove workaround for infinite loop with aac
avformat: do not require frame_size in avformat_find_stream_info() for CELT
avformat: do not require frame_size in avformat_find_stream_info() for MP1/2/3
avformat: do not require frame_size in avformat_find_stream_info() for AAC
...
Conflicts:
doc/APIchanges
libavcodec/Makefile
libavcodec/avcodec.h
libavcodec/h264.c
libavcodec/h264_ps.c
libavcodec/utils.c
libavcodec/version.h
libavcodec/x86/dsputil_mmx.c
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
All colorspaces are supported.
Renamed libutvideo.cpp to libutvideodec.cpp.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Also, do not keep trying to find and open a decoder in try_decode_frame() if
we already tried and failed once.
Fixes always searching until max_analyze_duration in
avformat_find_stream_info() when demuxing codecs without a decoder.
Also, do not give AVCodecContext.frame_size priority for muxing.
Updated 2 FATE references:
dxa-feeble - adds 1 audio frame that is still within 2 seconds as specified
by -t 2 in the FATE test
wmv8-drm-nodec - durations are not needed. previously they were estimated
using the packet size and average bit rate.
It is unnecessary. Also, for some codecs we're reading more than 1 frame per
packet. Instead we use a private context variable to calculate the bit rate,
stream duration, and packet durations.
Updated FATE seek test, which has slightly different timestamps due to a
more accurate bit rate calculation.
For encoding, frame_size is not a reliable indicator of packet duration.
Also, we don't want to have to force the demuxer to find frame_size for
stream copy to work.
Split off packet parsing into a separate function. Parse full packets at
once and store them in a queue, eliminating the need for tracking
parsing state in AVStream.
The horrible unreadable loop in read_frame_internal() now isn't weirdly
ordered and doesn't contain evil gotos, so it should be much easier to
understand.
compute_pkt_fields() now invents slightly different timestamps for two
raw vc1 tests, due to has_b_frames being set a bit later. They shouldn't
be more wrong (or right) than previous ones.
Make packet buffer a parameter, don't hardcode it to be
AVFormatContext.packet_buffer.
Also move the function higher in the file, since it will be called from
read_frame_internal().
This fixes issues when the bitrate is variable or inaccurate but the
frame size has not been determined yet.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
tiertexseq: set correct block_align for audio
tiertexseq: set audio stream start time to 0
voc/avs: Do not change the sample rate mid-stream.
segafilm: use the sample rate as the time base for audio streams
ea: fix audio pts
psx-str: fix audio pts
vqf: set packet duration
tta demuxer: set packet duration
mpegaudio_parser: do not ignore information from the first parsed frame
mpegaudio_parser: be less picky about the start position
thp: set audio packet durations
avcodec: add a Vorbis parser to get packet duration
vorbisdec: read the previous window flag for long windows
lavc: free the output packet when encoding failed or produced no output.
lavc: preserve avpkt->destruct in ff_alloc_packet().
lavc: clarify the meaning of AVCodecContext.frame_number.
mpegts: Pad the packet buffer in handle_packet().
mpegts: Do not call read_sl_header() when no bytes remain in the buffer.
Conflicts:
libavcodec/mpegaudio_parser.c
libavcodec/version.h
libavformat/mpegts.c
tests/ref/fate/pva-demux
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The time base is 1 / sample_rate, not 90000.
Several more codecs encode the sample count in the first 4 bytes of the
chunk, so we set the durations accordingly. Also, we can set start_time and
packet duration instead of keeping track of the sample count in the demuxer.
Fixes timestamp calculation.
The FATE reference is updated because timestamp calculations are now more
accurate. Previous timestamps were based on average bit rate.
This allows it to be used with get_bits without the thread of overreads.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
* qatar/master: (29 commits)
amrwb: remove duplicate arguments from extrapolate_isf().
amrwb: error out early if mode is invalid.
h264: change underread for 10bit QPEL to overread.
matroska: check buffer size for RM-style byte reordering.
vp8: disable mmx functions with sse/sse2 counterparts on x86-64.
vp8: change int stride to ptrdiff_t stride.
wma: fix invalid buffer size assumptions causing random overreads.
Windows Media Audio Lossless decoder
rv10/20: Fix slice overflow with checked bitstream reader.
h263dec: Disallow width/height changing with frame threads.
rv10/20: Fix a buffer overread caused by losing track of the remaining buffer size.
rmdec: Honor .RMF tag size rather than assuming 18.
g722: Fix the QMF scaling
r3d: don't set codec timebase.
electronicarts: set timebase for tgv video.
electronicarts: parse the framerate for cmv video.
ogg: don't set codec timebase
electronicarts: don't set codec timebase
avs: don't set codec timebase
wavpack: Fix an integer overflow
...
Conflicts:
libavcodec/arm/vp8dsp_init_arm.c
libavcodec/fraps.c
libavcodec/h264.c
libavcodec/mpeg4videodec.c
libavcodec/mpegvideo.c
libavcodec/msmpeg4.c
libavcodec/pnmdec.c
libavcodec/qpeg.c
libavcodec/rawenc.c
libavcodec/ulti.c
libavcodec/vcr1.c
libavcodec/version.h
libavcodec/wmalosslessdec.c
libavformat/electronicarts.c
libswscale/ppc/yuv2rgb_altivec.c
tests/ref/acodec/g722
tests/ref/fate/ea-cmv
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The container has no timestamps and the framerate isn't stored in the
data either.
The decoder sets codec timebase to experimentally found value 1/15. Do
the same for the demuxer too, it should at least be better than the
default 1/90000.
This fixes duplicate timestamps on mp2 in ts with non seekable input.
It also fixed the fate pva demux timestamps.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The fields "Number of Bytes" and "Number of Frames" are mixed up. "Bytes"
come first, "Frames" behind.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Alex Converse <alex.converse@gmail.com>
* qatar/master:
h264: error out on invalid bitdepth.
aacsbr: use a swap index for the Y matrix rather than copy buffers.
huffyuv: do not abort on unknown pix_fmt; instead, return an error.
lcl: return negative error codes on decode_init() errors.
rtpenc: Use MB info side data for splitting H263 packets for RFC 2190
h263enc: Add an option for outputting info about MBs as side data
avpacket: Add a function for shrinking already allocated side data
nellymoserdec: Saner and faster IMDCT windowing
Conflicts:
doc/APIchanges
libavcodec/avpacket.c
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This makes the packetization spec compliant for cases where one single
GOB doesn't fit into an RTP packet.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master: (58 commits)
amrnbdec: check frame size before decoding.
cscd: use negative error values to indicate decode_init() failures.
h264: prevent overreads in intra PCM decoding.
FATE: do not decode audio in the nuv test.
dxa: set audio stream time base using the sample rate
psx-str: do not allow seeking by bytes
asfdec: Do not set AVCodecContext.frame_size
vqf: set packet parameters after av_new_packet()
mpegaudiodec: use DSPUtil.butterflies_float().
FATE: add mp3 test for sample that exhibited false overreads
fate: add cdxl test for bit line plane arrangement
vmnc: return error on decode_init() failure.
libvorbis: add/update error messages
libvorbis: use AVFifoBuffer for output packet buffer
libvorbis: remove unneeded e_o_s check
libvorbis: check return values for functions that can return errors
libvorbis: use float input instead of s16
libvorbis: do not flush libvorbis analysis if dsp state was not initialized
libvorbis: use VBR by default, with default quality of 3
libvorbis: fix use of minrate/maxrate AVOptions
...
Conflicts:
Changelog
doc/APIchanges
libavcodec/avcodec.h
libavcodec/dpxenc.c
libavcodec/libvorbis.c
libavcodec/vmnc.c
libavformat/asfdec.c
libavformat/id3v2enc.c
libavformat/internal.h
libavformat/mp3enc.c
libavformat/utils.c
libavformat/version.h
libswscale/utils.c
tests/fate/video.mak
tests/ref/fate/nuv
tests/ref/fate/prores-alpha
tests/ref/lavf/ffm
tests/ref/vsynth1/prores
tests/ref/vsynth2/prores
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This fixes cases where the user had specified one desired MTU
via an option, and the protocol indicates another one.
Signed-off-by: Martin Storsjö <martin@martin.st>
Frame sizes in ID3v2.3 are not synchsafe, they are simply 32be numbers.
In practice this bug is not noticeable unless the frame size takes more
than 7 bits (which is almost never for text frames).
Seeking back on EOF will reset the EOF flag, causing us to re-enter
the loop to find the next marker in the ASF file, thus potentially
causing an infinite loop.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
* qatar/master:
adpcm: Clip step_index values read from the bitstream at the beginning of each frame.
oma: don't read beyond end of leaf_table.
doxygen: Remove documentation for non-existing parameters; misc small fixes.
Indeo3: fix crashes on corrupt bitstreams.
msmpeg4: Replace forward declaration by proper #include.
segment: implement wrap around
avf: reorder AVStream and AVFormatContext
aacdec: Remove erroneous reference to global gain from the out of bounds scalefactor error message.
Conflicts:
libavcodec/indeo3.c
libavformat/avformat.h
libavutil/avutil.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The properties of the CDCI Descriptor are insufficient to specify
the pixel format for uncompressed picture data. SMPTE 377-1 and
RP224v10 have defined a set of picture coding labels to indicate what
formatting was used.
This patch uses 2 labels to detect UYVY422 or YUYV422 pixel formats.
It defaults to UYVY422 for 8-bit 4:2:2 pictures to support files
that were created before the coding labels were introduced ~2008
The codec pix_fmt default was changed from 0 (PIX_FMT_YUV420P) to
-1 (PIX_FMT_NONE)
Reviewed-by: Baptiste Coudurier <baptiste.coudurier@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This supports detection of uncompressed picture in files that
didn't include a Picture Coding Label. The lables weren't
available until SMPTE 377-1 and RP224v10
Reviewed-by: Baptiste Coudurier <baptiste.coudurier@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This matches the order used for the index table edit rate.
Reviewed-by: Baptiste Coudurier <baptiste.coudurier@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Must check all 16 bytes because there is a planar 10-bit format
label that has equal first 15 bytes
Review-by: Baptiste Coudurier <baptiste.coudurier@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Provide a way to wrap around the segment index so pseudostreaming
live through a web server and html5 browser is simpler.
Also ensure that 0 (disable) is a valid value across the options
providing wrap around.
