* qatar/master:
rv30: return AVERROR(EINVAL) instead of EINVAL
build: add -L flags before existing LDFLAGS
simple_idct: whitespace cosmetics
simple_idct: make repeated code a macro
dsputil: remove huge #if 0 block
simple_idct: change 10-bit add/put stride from pixels to bytes
dsputil: allow 9/10-bit functions for non-h264 codecs
dnxhd: rename some data tables
dnxhdenc: remove inline from function only called through pointer
dnxhdenc: whitespace cosmetics
swscale: mark YUV422P10(LE,BE) as supported for output
configure: add -xc99 to LDFLAGS for Sun CC
Remove unused and non-compiling vestigial g729 decoder
Remove unused code under G729_BITEXACT #ifdef.
mpegvideo: fix invalid picture unreferencing.
dsputil: Remove extra blank line at end.
dsputil: Replace a LONG_MAX check with HAVE_FAST_64BIT.
simple_idct: add 10-bit version
Conflicts:
Makefile
libavcodec/g729data.h
libavcodec/g729dec.c
libavcodec/rv30.c
tests/ref/lavfi/pixdesc
tests/ref/lavfi/pixfmts_copy
tests/ref/lavfi/pixfmts_null
tests/ref/lavfi/pixfmts_scale
tests/ref/lavfi/pixfmts_vflip
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (30 commits)
AVOptions: make default_val a union, as proposed in AVOption2.
arm/h264pred: add missing argument type.
h264dsp_mmx: place bracket outside #if/#endif block.
lavf/utils: fix ff_interleave_compare_dts corner case.
fate: add 10-bit H264 tests.
h264: do not print "too many references" warning for intra-only.
Enable decoding of high bit depth h264.
Adds 8-, 9- and 10-bit versions of some of the functions used by the h264 decoder.
Add support for higher QP values in h264.
Add the notion of pixel size in h264 related functions.
Make the h264 loop filter bit depth aware.
Template dsputil_template.c with respect to pixel size, etc.
Template h264idct_template.c with respect to pixel size, etc.
Preparatory patch for high bit depth h264 decoding support.
Move some functions in dsputil.c into a new file dsputil_template.c.
Move the functions in h264idct into a new file h264idct_template.c.
Move the functions in h264pred.c into a new file h264pred_template.c.
Preparatory patch for high bit depth h264 decoding support.
Add pixel formats for 9- and 10-bit yuv420p.
Choose h264 chroma dc dequant function dynamically.
...
Conflicts:
doc/APIchanges
ffmpeg.c
ffplay.c
libavcodec/alpha/dsputil_alpha.c
libavcodec/arm/dsputil_init_arm.c
libavcodec/arm/dsputil_init_armv6.c
libavcodec/arm/dsputil_init_neon.c
libavcodec/arm/dsputil_iwmmxt.c
libavcodec/arm/h264pred_init_arm.c
libavcodec/bfin/dsputil_bfin.c
libavcodec/dsputil.c
libavcodec/h264.c
libavcodec/h264.h
libavcodec/h264_cabac.c
libavcodec/h264_cavlc.c
libavcodec/h264_loopfilter.c
libavcodec/h264_ps.c
libavcodec/h264_refs.c
libavcodec/h264dsp.c
libavcodec/h264idct.c
libavcodec/h264pred.c
libavcodec/mlib/dsputil_mlib.c
libavcodec/options.c
libavcodec/ppc/dsputil_altivec.c
libavcodec/ppc/dsputil_ppc.c
libavcodec/ppc/h264_altivec.c
libavcodec/ps2/dsputil_mmi.c
libavcodec/sh4/dsputil_align.c
libavcodec/sh4/dsputil_sh4.c
libavcodec/sparc/dsputil_vis.c
libavcodec/utils.c
libavcodec/version.h
libavcodec/x86/dsputil_mmx.c
libavformat/options.c
libavformat/utils.c
libavutil/pixfmt.h
libswscale/swscale.c
libswscale/swscale_internal.h
libswscale/swscale_template.c
tests/ref/seek/lavf_avi
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This patch lets e.g. dsputil_init chose dsp functions with respect to
the bit depth to decode. The naming scheme of bit depth dependent
functions is <base name>_<bit depth>[_<prefix>] (i.e. the old
clear_blocks_c is now named clear_blocks_8_c).
Note: Some of the functions for high bit depth is not dependent on the
bit depth, but only on the pixel size. This leaves some room for
optimizing binary size.
Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
* qatar/master:
mpegaudiodec: group #includes more sanely
mpegaudio: remove #if 0 blocks
ffmpeg.c: reset avoptions after each input/output file.
ffmpeg.c: store per-output stream sws flags.
mpegaudio: remove CONFIG_MPEGAUDIO_HP option
mpegtsenc: Clear st->priv_data when freeing it
udp: Fix receiving RTP data over multicast
rtpproto: Remove an unused variable
regtest: fix wma tests
NOT pulled: mpegaudio: remove CONFIG_AUDIO_NONSHORT
regtest: separate flags for encoding and decoding
Conflicts:
ffmpeg.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The low quality mode is off by default and never tested. The high
quality mode is also plenty fast enough.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This patch lets e.g. dsputil_init chose dsp functions with respect to
the bit depth to decode. The naming scheme of bit depth dependent
functions is <base name>_<bit depth>[_<prefix>] (i.e. the old
clear_blocks_c is now named clear_blocks_8_c).
Note: Some of the functions for high bit depth is not dependent on the
bit depth, but only on the pixel size. This leaves some room for
optimizing binary size.
Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Move prototypes to header files, add missing prototypes,
make some functions static.
Originally committed as revision 22310 to svn://svn.ffmpeg.org/ffmpeg/trunk
Neither the asm() nor the __asm__() keyword is part of the C99
standard, but while GCC accepts the former in C89 syntax, it is not
accepted in C99 unless GNU extensions are turned on (with -fasm). The
latter form is accepted in any syntax as an extension (without
requiring further command-line options).
Sun Studio C99 compiler also does not accept asm() while accepting
__asm__(), albeit reporting warnings that it's not valid C99 syntax.
Originally committed as revision 15627 to svn://svn.ffmpeg.org/ffmpeg/trunk
Consistently apply this rule: the guard name is obtained from the
filename by stripping the leading "lib", converting '/' and '.' to
'_' and uppercasing the resulting name. Guard names in the root
directory have to be prefixed by "FFMPEG_".
Originally committed as revision 15120 to svn://svn.ffmpeg.org/ffmpeg/trunk
linking. The FDPIC relocs also break for any other format. Thus check the
compiler environment and select the appropriate sections/relocs.
patch by Mike Frysinger, vapier.adi a gmail d com
Originally committed as revision 12125 to svn://svn.ffmpeg.org/ffmpeg/trunk
include paths in the source files.
mostly from a patch by Ronald S. Bultje, rbultje ronald.bitfreak net
Originally committed as revision 9034 to svn://svn.ffmpeg.org/ffmpeg/trunk
DEFUN_END macro adds the size information to the symbol
table. This is introduces no functionnal change, it's only meant to simplify
e.g. debugging
Patch by Marc Hoffman %mmh A pleasantst P com%
Original thread:
Date: May 5, 2007 12:26 PM
Subject: [FFmpeg-devel] PATCH Blackfin DSP utilities, DEFUN_END added
Originally committed as revision 9019 to svn://svn.ffmpeg.org/ffmpeg/trunk
and standard IEEE 8x8 block transforms
patch by Marc Hoffman, mmh pleasantst com
Originally committed as revision 8594 to svn://svn.ffmpeg.org/ffmpeg/trunk
