Commit Graph

451 Commits

Author SHA1 Message Date
Clément Bœsch
e01fba5562 movenc: Add an F4V muxer
F4V is Adobe's mp4/iso media variant, with the most significant
addition/change being supporting other flash codecs than just
aac/h264.

Signed-off-by: Martin Storsjö <martin@martin.st>
2013-10-23 11:17:03 +03:00
Martin Storsjö
f2b00a5372 movenc: Return a proper error code for invalid combinations
Signed-off-by: Martin Storsjö <martin@martin.st>
2013-09-22 21:02:52 +03:00
Martin Storsjö
f1eac2b8a0 movenc: Use keyframes as default fragmentation point in ismv
Fragmenting blindly to a certain duration isn't a good choice
if one should be able to switch between different qualities,
therefore default to keyframes instead.

Signed-off-by: Martin Storsjö <martin@martin.st>
2013-09-22 16:10:21 +03:00
Martin Storsjö
a9553bbb33 movenc: Set all implicit flags immediately in mov_write_header
This makes sure other sanity checks for conflicting options
can work properly, e.g. for the conflict between the faststart
flag when using the ismv mode.

Signed-off-by: Martin Storsjö <martin@martin.st>
2013-09-22 16:10:21 +03:00
Martin Storsjö
187023f6b2 movenc: Set mov->mode earlier in mov_write_header
This allows simplifying some early checks that depend on the
muxer mode.

Signed-off-by: Martin Storsjö <martin@martin.st>
2013-09-22 16:10:21 +03:00
Martin Storsjö
72fe16a13e movenc: Use null buffers for measuring the amount of data to be written
Signed-off-by: Martin Storsjö <martin@martin.st>
2013-09-19 22:42:40 +03:00
Martin Storsjö
e7bf085b78 movenc: Add an option for omitting the tfhd base offset
This makes the output fragments independent of their position in
the output stream, making the output work better when streamed.

QuickTime Player doesn't support fragmented mp4 without the base
data offset, though.

Signed-off-by: Martin Storsjö <martin@martin.st>
2013-09-17 23:30:31 +03:00
Martin Storsjö
a4adabb460 movenc: Write the moof atom in two passes
This is a bit more work, but avoids having to fill in
the data offset field afterwards instead of directly when
the rest of the trun atom is written.

This simplifies future cases where this field needs to be set to
something different.

Signed-off-by: Martin Storsjö <martin@martin.st>
2013-09-17 23:25:46 +03:00
Martin Storsjö
bdf990425e movenc: Simplify setting the fragmentation flag
This makes sure the faststart vs fragmentation check works as
intended when fragmentation is enabled due to using the ismv mode.

Signed-off-by: Martin Storsjö <martin@martin.st>
2013-09-09 23:58:33 +03:00
Martin Storsjö
8b524ab0c4 movenc: Add a warning message if conflicting options have been specified
Signed-off-by: Martin Storsjö <martin@martin.st>
2013-09-09 23:57:41 +03:00
Martin Storsjö
0fbda03e5c movenc: Don't flush after each written packet
This should improve write performance quite significantly.
---
Tested with both writing a normal mp4, by using the faststart
feature and writing a fragmented mp4 file; all turn out with the
same md5sum as before.

Signed-off-by: Martin Storsjö <martin@martin.st>
2013-09-03 10:36:17 +03:00
Martin Storsjö
0fb3e1c6ce movenc: Check for errors from mov_create_chapter_track
On failures in the write_trailer function, we could also ignore
the errors and try to finish the file despite these errors (which
would only leave an incomplete chapters track). It's probably better
to signal the error clearly to the caller though (and if this
function failed there's no guarantee that there's enough memory to
finish the trailer either).

Signed-off-by: Martin Storsjö <martin@martin.st>
2013-08-27 10:26:10 +03:00
Martin Storsjö
2bbad1f94c movenc: Properly free allocated data on failures in mov_write_header
Signed-off-by: Martin Storsjö <martin@martin.st>
2013-08-27 10:26:08 +03:00
Martin Storsjö
3559fb97c4 movenc: Check that tracks->enc exists before trying to free extradata
Signed-off-by: Martin Storsjö <martin@martin.st>
2013-08-27 10:26:07 +03:00
Martin Storsjö
4d122b01e4 movenc: Check for allocation failures in mov_create_chapter_track
Signed-off-by: Martin Storsjö <martin@martin.st>
2013-08-27 10:25:55 +03:00
Luca Barbato
b89e8759e0 mov: Write tmcd extradata 2013-08-25 13:49:21 +02:00
John Stebbins
30ce289074 movenc: Make tkhd "enabled" flag QuickTime compatible
QuickTime will play multiple audio tracks concurrently if this flag is
set for multiple audio tracks.  And if no subtitle track has this flag
set, QuickTime will show no subtitles in the subtitle menu.

Signed-off-by: Anton Khirnov <anton@khirnov.net>
2013-08-23 09:55:42 +02:00
Clément Bœsch
60198742ff movenc: fix detection of 64bit offset requirement
The old method doesn't work when moov is relocated to beginning of file

Signed-off-by: Martin Storsjö <martin@martin.st>
2013-08-21 14:20:33 +01:00
John Stebbins
fe5d5a8ffc movenc: Make chapter track QuickTime compatible
QuickTime requires that the stsd.text box be completely filled in.

Signed-off-by: Martin Storsjö <martin@martin.st>
2013-08-21 14:20:33 +01:00
Clément Bœsch
f8ef91ff3d movenc: add faststart option for web streaming
Faststart moves the moov atom to the beginning of the file and rewrites
the rest of the file after muxing is complete.

Signed-off-by: Martin Storsjö <martin@martin.st>
2013-08-21 14:20:33 +01:00
John Stebbins
6c786765cd movenc: Allow chapters to be written in trailer
This allows creation of frame accurate chapter marks from sources
like DVD and BD where the precise chapter location is not known until
the chapter mark has been reached during reading.

Signed-off-by: Martin Storsjö <martin@martin.st>
2013-08-20 15:18:42 +01:00
John Stebbins
db03cb37fd movenc: Allow chapter track in default MODE_MP4
Signed-off-by: Martin Storsjö <martin@martin.st>
2013-08-20 15:18:42 +01:00
Luca Barbato
67400f6b62 mov: Prevent segfaults on mov_write_hdlr_tag
Do not segfault when writing tracks such as tmcd by writing them down
as generic DataHandlers if not known.
2013-08-20 00:22:58 +02:00
Luca Barbato
22de0f8369 mov: Compute max duration among the tracks with a timescale
Prevent an assert.
2013-08-20 00:22:58 +02:00
Luca Barbato
3952303010 mov: Set the timescale for data streams
Data streams have a defined timebase, do not ignore it.
2013-08-20 00:22:58 +02:00
Martin Storsjö
0a14fefd68 movenc: Indicate that negative timestamps are supported
The mov/mp4 muxer has support for handling negative timestamps
via edit lists (which customarily is used for handling the 1-frame
delay due to B-frames as well).

Using the muxer's native way of handling it is better than using
the generic offsetting. The generic offsetting is a bit too
crude when e.g. the timebase of one track is 1/fps, where the
edit lists can handle it accurately.

Signed-off-by: Martin Storsjö <martin@martin.st>
2013-08-17 22:46:11 +01:00
Martin Storsjö
21732063a3 movenc: K&R formatting cosmetics
Signed-off-by: Martin Storsjö <martin@martin.st>
2013-07-07 21:34:31 +03:00
Andrey Semashev
7c020e1ad3 movenc: Grow the frag_info array in chunks
Previously it was grown one element at a time, which leads to
excessive reallocations.

Bug-Id: 525
Signed-off-by: Martin Storsjö <martin@martin.st>
2013-06-04 15:05:42 +03:00
Andrey Semashev
ab1189766a movenc: Increase the cluster array allocation by doubling
The previous allocation increment of 16384 meant that the cluster
array was allocated for 0.6 MB initially, which is a bit excessive
for cases with fragmentation where only a fraction of that ever
actually is used.

Therefore, start off at a much smaller value, and increase by
doubling (to avoid reallocating too often when writing long
non-fragmented mp4 files).

Bug-Id: 525
Signed-off-by: Martin Storsjö <martin@martin.st>
2013-06-04 15:05:31 +03:00
Andrey Semashev
3b4feac1ec movenc: Keep track of the allocated size for the cluster array
When writing fragmented mp4, the cluster array is reset when a
fragment is written. Instead of starting off reallocating the
array only based on the number of current elements in it, keep
track of how many elements there were allocated earlier.

This avoids reallocating this array needlessly when writing
fragmented mp4 files.

Bug-Id: 525
Signed-off-by: Martin Storsjö <martin@martin.st>
2013-06-04 15:05:12 +03:00
Jeremy Hinegardner
40bbbce7e8 movenc: Don't add base_data_offset in tfhd for PIFF files
According to the PIFF specification[1] the base_data_offset field MUST be
omitteed. See section 5.2.17. Since the ISMV files created by libavformat
state that they are 'piff' compatible via 'ftyp' box, this needs to be
corrected.

[1] http://www.iis.net/learn/media/smooth-streaming/protected-interoperable-file-format

Signed-off-by: Martin Storsjö <martin@martin.st>
2013-05-17 00:28:50 +03:00
Martin Storsjö
61d36761ef movenc: Simplify code by using avio_wb24
Signed-off-by: Martin Storsjö <martin@martin.st>
2013-01-30 13:45:45 +02:00
Luca Barbato
8034130e06 rtp: set the payload type as stream id
Support multiple video/audio streams with different format in the
same session.

Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2012-11-14 20:38:51 +01:00
Anton Khirnov
716d413c13 Replace PIX_FMT_* -> AV_PIX_FMT_*, PixelFormat -> AVPixelFormat 2012-10-08 07:13:26 +02:00
Diego Biurrun
11d4e92ed9 avformat: Remove non-compiling and/or silly commented-out printf/av_log statements 2012-10-01 10:24:28 +02:00
Anton Khirnov
3b4bb19e63 lavf: flush the output AVIOContext in av_write_trailer().
This is consistent with stdio and is what we want to do in all cases.

Fixes a bug in the voc muxer which didn't flush in write_trailer()
previously. This is the cause of the change in the test results.
2012-09-15 18:25:07 +02:00
Martin Storsjö
e6153f173a avopt: Store defaults for AV_OPT_TYPE_INT in the i64 union member
Signed-off-by: Martin Storsjö <martin@martin.st>
2012-09-04 23:13:44 +03:00
Martin Storsjö
d58dd4b5b5 avopt: Store defaults for AV_OPT_TYPE_FLAGS in the i64 union member
Signed-off-by: Martin Storsjö <martin@martin.st>
2012-09-04 23:13:38 +03:00
Martin Storsjö
124134e424 avopt: Store defaults for AV_OPT_TYPE_CONST in the i64 union member
Signed-off-by: Martin Storsjö <martin@martin.st>
2012-09-04 23:13:32 +03:00
Anton Khirnov
36ef5369ee Replace all CODEC_ID_* with AV_CODEC_ID_* 2012-08-07 16:00:24 +02:00
Diego Biurrun
0177b7d23a Improve descriptiveness of a number of codec and container long names 2012-07-30 20:46:55 +02:00
Diego Biurrun
6774247a9d avformat: Drop pointless "format" from container long names 2012-07-30 13:59:06 +02:00
Ronald S. Bultje
fd48721849 lavf: use conditional notation for default codec in muxer declarations.
This removes the use of macro nesting in these code constructs, which
makes it easier to parse in pre-processors.
2012-07-22 16:10:21 -07:00
Ronald S. Bultje
5354a904fe rtsp: remove terminal comma in FF_RTP_FLAG_OPTS macro.
This makes usage of the macro look more natural when
used with array entries.

Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
2012-07-21 15:35:01 -04:00
Martin Storsjö
9e74db6850 mov: Support muxing/demuxing iLBC
The packet size, signalled via block_align, has to be passed via
the container.

Signed-off-by: Martin Storsjö <martin@martin.st>
2012-06-18 22:00:35 +03:00
Alex Converse
41e9682af2 movenc: Write chan atom for all audio tracks in mov mode movies. 2012-06-04 10:08:31 -07:00
Alex Converse
ed7bdd8647 movenc: Don't write the 'wave' atom or its child 'enda' for lpcm audio.
It's left over from stsd v0. QuickTime 7 no longer writes 'wave' or 'enda'
when 'lpcm' is the audio tag.
2012-05-25 11:24:43 -07:00
Alex Converse
dc878b96a7 movenc: Support high sample rates in isomedia formats by setting the sample rate field in stsd to 0.
Libisomediafile appears to always set this field to zero.
2012-04-20 13:45:35 -07:00
Alex Converse
73b7437f1d movenc: Remove a dead initialization 2012-04-12 18:34:45 -07:00
Luca Barbato
ebbede2265 movenc: small refactor mov_write_packet
Share the formerly internal write_packet with the hinter and move the
fragment flush logic to the user facing one since it is not concerned
about movtrack-only streams.

Fixes bug #263

Signed-off-by: Martin Storsjö <martin@martin.st>
2012-04-11 14:38:37 +03:00