The order of error codes will be useful in my future fateserver patches.
Signed-off-by: Timothy Gu <timothygu99@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Normally, a Laplace distribution is more typical of the residuals
encoded, but for noisy input, it's both better and simpler to be
safe and use a 1/d^2 distribution. Second hunk could use some
renormalization but it has effectively little impact.
Output size of ffvhuff on various 4:2:0 sequences:
context=0,1/d: 851974 27226 1137281
context=0,1/d²: 619081 25069 1051500
context=0,1/d³: 501983 30454 1290561
context=0,lapl: 500650 31754 1304082
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '194be1f43ea391eb986732707435176e579265aa':
lavf: switch to AVStream.time_base as the hint for the muxer timebase
Conflicts:
doc/APIchanges
libavformat/filmstripenc.c
libavformat/movenc.c
libavformat/mxfenc.c
libavformat/oggenc.c
libavformat/swf.h
libavformat/version.h
tests/ref/lavf/mkv
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This avoids the following libass warning when using the subtitles
filter: "Neither PlayResX nor PlayResY defined. Assuming 384x288"
Subtitles tests change because the output is ASS and the PlayRes[XY]
ends up in the output.
Previously, AVStream.codec.time_base was used for that purpose, which
was quite confusing for the callers. This change also opens the path for
removing AVStream.codec.
The change in the lavf-mkv test is due to the native timebase (1/1000)
being used instead of the default one (1/90000), so the packets are now
sent to the crc muxer in the same order in which they are demuxed
(previously some of them got reordered because of inexact timestamp
conversion).
It has not been properly maintained for years and there is little hope
of that changing in the future.
It appears simpler to write a new replacement from scratch than
unbreaking it.
This very slightly improves compression
Found-by: Christophe Gisquet <christophe.gisquet@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The actual predictor value, set by the trellis code, never
was written back into the variable that was written into
the block header. This was accidentally removed in b304244b.
This significantly improves the audio quality of the trellis
case, which was plain broken since b304244b.
Encoding IMA QT with trellis still actually gives a slightly
worse quality than without trellis, since the trellis encoder
doesn't use the exact same way of rounding as in
adpcm_ima_qt_compress_sample and adpcm_ima_qt_expand_nibble.
Fixes part of Ticket3701
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
adpcm_ima_qt does not produce reproducible results, so it is temporarily
disabled (see #3701).
Signed-off-by: Timothy Gu <timothygu99@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This prevents all results from being declared whenever the function is called.
Signed-off-by: Timothy Gu <timothygu99@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This only checks that things havnt changed, the values provide little
help in determining if a change is good or bad.
Improvements welcome!
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is the same as 5a15602a4e, which
accidentally did not get merged.
Signed-off-by: Timothy Gu <timothygu99@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This results in DefaultDuration not being written when the framerate is
not known, but as this field is purely informative, this should not
break any sane demuxers.
The official samples are 50% smaller
Avoid having reference samples which are strongly linked to the used resampler
implementation. (which for example would require new samples to be used if this
implementation changes)
Also its more correct to use the official samples instead of the current
decoder output
also enable tests
The tests also fully pass as well with the previous samples.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This corrects the bug that caused the checksums to change in
9767d7c092.
It caused the EOS flag to be set incorrectly; the ogg spec does not
allow it to be set in the middle of a logical bitstream.
Signed-off-by: Andrew Kelley <superjoe30@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
Before, header information for ogg format files was sent with the
first encoded packet.
This patch makes it so that it is possible for API users to
differentiate between headers and encoded audio. This is useful, for
example, when creating an audio stream where you want to send one set
of headers for every client that connects and then the encoded stream
of audio.
Signed-off-by: Martin Storsjö <martin@martin.st>
Based off the srt encoder. The following features are unimplemented:
- fonts, colors, sizes
- alignment and positioning
The rest works well. For example, use ffmpeg to convert subtitles into the .vtt format:
ffmpeg -i input.srt output.vtt
Signed-off-by: Aman Gupta <ffmpeg@tmm1.net>
Signed-off-by: Clément Bœsch <u@pkh.me>
* commit '6656370b858329ca07a60a2de954d5e90daa0206':
avconv: set the "encoder" tag when transcoding
Conflicts:
ffmpeg.c
tests/ref/lavf/mkv
tests/ref/seek/lavf-mkv
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '93afb6c98df876b15e3d911a9450ad55f92080ce':
avconv: set output avg_frame_rate when known
Conflicts:
ffmpeg.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b70d7a4ac72d23f3448f3b08b770fdf5f57de222':
lavc: add a native Opus decoder.
Conflicts:
Changelog
configure
libavcodec/version.h
Fate tests pass with both avresample as well as swresample based opus decoder, but
are disabled (reference files are very large so i want to think a day or 2 about
if theres an alternative or if they could be avoided, they also dont match the
official samples)
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Use it instead of checking CODEC_FLAG_BITEXACT in the first stream's
codec context.
Using codec options inside lavf is fragile and can easily break when the
muxing codec context is not the encoding context.
Initial implementation by Andrew D'Addesio <modchipv12@gmail.com> during
GSoC 2012.
Completion by Anton Khirnov <anton@khirnov.net>, sponsored by the
Mozilla Corporation.
Further contributions by:
Christophe Gisquet <christophe.gisquet@gmail.com>
Janne Grunau <janne-libav@jannau.net>
Luca Barbato <lu_zero@gentoo.org>
* commit '6072184e702b4b631ac72f1b66b75e5f21e0ce2d':
asfenc: use codec descriptors instead of AVCodecs to write codec info
Conflicts:
tests/ref/lavf/asf
tests/ref/seek/lavf-asf
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Also, stop using AVCodecContext.codec_name as fallback, since it will be
deprecated.
Changes the result of the lavf-asf test (and its associated seektest),
since 'msmpeg4v3' gets written instead of just 'msmpeg4'.
Partially undoes commit 2c4e08d893:
riff: always generate a proper WAVEFORMATEX structure in
ff_put_wav_header
A new flag, FF_PUT_WAV_HEADER_FORCE_WAVEFORMATEX, is added to force the
use of WAVEFORMATEX rather than PCMWAVEFORMAT even for PCM codecs.
This flag is used in the Matroska muxer (the cause of the original
change) and in the ASF muxer, because the specifications for
these formats indicate explicitly that WAVEFORMATEX should be used.
Muxers for other formats will return to the original behavior of writing
PCMWAVEFORMAT when writing a header for raw PCM.
In particular, this causes raw PCM in WAV to generate the canonical
44-byte header expected by some tools.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The rational for this is another issue that plex has exposed. When it is
conducting a transcode of video to HLS for streaming, my father noticed
artifacts when played on his GoogleTV (NSZ-GT1). He sent me a test file
and I reproduced it on my device of the same model. It is important to
note that the artifacts were not present when streaming to VLC or QuickTime
Player. I copied the command-line that plex used, and conducted all of the
following tests using FFmpeg git.
Transcode to HLS: artifacts on playback
Transcode to TS: playback is fine
Cat HLS segments into a single TS: playback is fine
Segment single TS file to segments: artifacts on playback
Segment single TS file to segments using Apple's HLS segmenter: playback is
fine
At this point I carefully examined the differences between Apple's HLS
segmenter output and FFmpeg's. Among the considerable differences, I
noticed that the video PES packets always had a 0 length. So I continued:
Transcode to HLS using FFmpeg with 0 length PES packets: playback is fine.
Segment single TS to segments with 0 length PES packets: playback is fine.
All failures mentioned are only on the GTV since it is the only player on
which I could reproduce artifacts. I only tested the GTV, VLC, and
QuickTime Player though, so my test case is limited. I do not know if
other players exhibit this issue.
Since it was useful last time, I have uploaded the test file as
hls_pes_packet_length.m4v along with its associated txt file which contains
the transcode command-line that was used.
Reviewed-by: Kieran Kunhya <kierank@obe.tv>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '911fa05b514e1be009e00b79d7004b93717c023b':
mvc: Specify the pixel format for the mv-mvc* tests
Conflicts:
tests/fate/video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Also set the RGBA pixel format correctly as the native endian format,
which is what it returns.
This fixes the tests on big endian.
Signed-off-by: Martin Storsjö <martin@martin.st>
This should avoid slight differences in the output causes by input
size alignment differences between archs
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes conversion of pal8 to rgb formats with alpha.
Updated references for 2 FATE tests which previously encoded fully
transparent images.
Based on a patch by Baptiste Coudurier <baptiste.coudurier@gmail.com>
If 384k is too high for the samplerate, choose the closest
possible
Idea to increase the bitrate from: 46439e1562
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This causes us to favor RGB8 over PAL8 when FF_LOSS_COLORQUANT is used
It probably makes sense to reinvestigate the exact scoring of pal8 when
our pal8 support improves to be supperior to rgb8
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '60fd7d36c47d62d4c603bf16c213b1a924f5cfcf':
fate: correctly set sample rate for mp2 tests
Conflicts:
tests/fate/acodec.mak
tests/lavf-regression.sh
one hunk has been ommited as it breaks fate
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '92b099daf4b8ef93513e38b43899cb8458a2fde3':
swscale: support converting YVYU422 pixel format
Conflicts:
libswscale/input.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* cus/stable:
mpeg12enc: always set closed gop flag on the first gop
mpeg12enc: always write closed gops for intra only outputs
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '66d04c068a30751750818dcfbb6555ab74eb3f6d':
fate: Explicitly use gray16le in fate-sgi-gray16
Conflicts:
tests/fate/image.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Improves compatibility with XDCAM HD formats. It has been set for a long time
in ffmbc.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Marton Balint <cus@passwd.hu>
* commit '3e4e2142d246699a1a3a0045ba7124b18bc34d7a':
fate: Convert the paletted output in the brenderpix tests to rgb24
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Improves rgb -> gray16 conversion
Fixes Ticket3422
The pam and png output files look visually similar, in both cases the
dynamics increase to 0x0 -> 0xfffb.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
FATE: add a test for the ONE_STR mapping mode of the channelmap filter
Conflicts:
tests/fate/filter-audio.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Extrapolate audio timestamps based on the number of samples demuxed.
Deal with some MXF nastiness involving fractional number of
samples per EditUnit when seeking (the specs handwave this away).
Further fixes from Tomas Härdin.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
tiny_ssim is build on the host, not the target and the HAVE_* are set for the
target.
This patch fixes building tiny_ssim when HAVE_* differed between target and host
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The official Ut Video decoder only threads with slices, thus until
now any files encoded by the libavcodec encoder have only been
decodable with a single thread. The default slice count is now
set to subsampled_height / 120.
Also sets slices to 1 for the Ut Video encoder tests to keep them
green.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The official Ut Video decoder only threads with slices, thus until
now any files encoded by the libavcodec encoder have only been
decodable with a single thread. The default slice count is now
set to subsampled_height / 120.
Also sets slices to 1 for the Ut Video encoder tests to keep them
green.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
The old one didn't use segmentation. One uses segmentation in all frame
types (--aq-mode=1), and the other uses all segmentation features, but
only in inter frames (mbgraph).
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This disables backward probability updates, which makes the codec more
friendly for frame-level multi-threading.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* commit 'b5f851ed7e59f88b4130a420033d9fe191ec9e2f':
FATE: force FLAC in the lavf ogg test
Conflicts:
tests/lavf-regression.sh
See: 28caf13ac3
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
fate: force the simple idct for xvid custom matrix test
Conflicts:
tests/fate/xvid.mak
tests/ref/fate/xvid-custom-matrix
See: ef034cbf18
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The original test without a forced idct is still useful since it tests
the switching of the idct algorithm/permutation on x86 with MMX. MMXext
or SSE2. Make sure the test runs only if MMX inline asm is available and
force -cpuflags to all.
Add the required bitexact flag for both tests.
Even though the most common framerate for RoQ is 30fps,
the format supports other framerates too.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
no changes in either standard deviation or PSNR is seen in any of the changed fate
cases
MSE changes from 0.05012422 to 0.04890000
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The fate test is changed because the reference file depends on the use of
non cleared data at the very
end. Alternatively we could upload a new reference file, though that would
then have to be changed every time the handling of a truncated frame changes
or theres a change to error concealment, each time adding a new file ...
Fixes use of uninitialized memory
Fixed: msan_uninit-mem_7f3c02b81363_2787_RLG2_19.rm
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ca96e337169093979d7c763064ad9dae12b3108c':
vp9: drop support for real (non-emulated) edges
Conflicts:
libavcodec/vp9block.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ef8c93e2f18c624d0c266687e43ab99af7921dd3':
vp8: drop support for real (non-emulated) edges
Conflicts:
tests/fate/vpx.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
They are not measurably faster on x86, they might be somewhat faster on
other platforms due to missing emu edge SIMD, but the gain is not large
enough to justify the added complexity.
They are not measurably faster on x86, they might be somewhat faster on
other platforms due to missing emu edge SIMD, but the gain is not large
enough to justify the added complexity.
* commit '9d18a7d3ec09d6d933d648570643fde924aa391a':
fate: Update AAC ELD 5.1 ref for recent bugfixes.
also reenable fate-aac-er_ad6000np_44_ep0, as this commit updates the pcm
reference, so that the test works again
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b2212dec0f011893ec68eecaa990170fa24050d7':
aac: Fix TNS decoding for the 512 sample window family.
also temporarily disable fate-aac-er_ad6000np_44_ep0 as this commit
causes a mismatch with the reference pcm file
The test will be reenabled after all fixes and with a new pcm reference
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b318106fae65149356934fc72feafef3272fd4ea':
FATE: add a test for the lavr mixing case fixed in fc6a3ef40d
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a8cc88b1a23dc1515f27cfa98af16a273c539091':
tests/Makefile: allow FILTER* to be called with lists of filter names
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
fate: Explicitly specify the pixel format for the pngparser test
Conflicts:
tests/fate/image.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The RGB32 pixel format is RGBA/BGRA depending on target
endianness - make sure to convert it to one specific format for
the framecrc tests.
This fixes the pngparser fate test on big endian.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'cfb4ee30977732674d30c20e93a761c33c743972':
fate: add a pngparser test
Conflicts:
tests/fate/image.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'eddff165b4cdc1f064245a4bad6f4265581c12b1':
fate: add utility function to test parser, demuxer, and decoder
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is useful for debugging.
Reference and ffprobe.xsd changes done and tested by Stefano Sabatini.
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
Since we don't write lavf's string when bitexact is requested, this will
prevent the tag from being copied from the source stream.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '58a868968df445068a143f327ced03b6a02baf0d':
FATE: drop the last partial frame in the wmv8-drm test
Conflicts:
tests/ref/fate/wmv8-drm
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The encoder uses almost none of the mpegvideo infrastructure, only some
fields from MpegEncContext.
The FATE results change because now an all-zero quant matrix is written
into the file. Since it is not used for anything for ljpeg, this should
not be a problem.
This makes the USE_FLOATS == 0 available to the end user
More float optimizations can easily be added as well now
common code should be factored out into a common file once all
fixed point & floating point optimizations are done, this is to
avoid having to move code back and forth between files.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The old one didn't use segmentation. One uses segmentation in all frame
types (--aq-mode=1), and the other uses all segmentation features, but
only in inter frames (mbgraph).
* commit '874838dc6589d978611c89a40694a5074f892a76':
fate: add one select filter test
Conflicts:
tests/fate/filter-video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Originally written by Ronald S. Bultje <rsbultje@gmail.com> and
Clément Bœsch <u@pkh.me>
Further contributions by:
Anton Khirnov <anton@khirnov.net>
Diego Biurrun <diego@biurrun.de>
Luca Barbato <lu_zero@gentoo.org>
Martin Storsjö <martin@martin.st>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
