* commit '9f90b24877016e7140b9b14e4b1acee663bb6d8a':
lavc: Drop deprecated get_buffer related functions
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '01bcc2d5c23fa757d163530abb396fd02f1be7c8':
lavc: Drop deprecated destruct_packet related functions
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
Assert on `avctx->codec->encode2` to avoid a SEGFAULT on the subsequent
function call.
avcodec_encode_video2() uses a similar assertion.
Calling the wrong function on a stream is a serious inconsistency
which could at other places be potentially dangerous and exploitable,
it is thus safer to stop execution and not continue with such
inconsistency after returning an error.
Commit-message-extended-by commiter
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
All DSD codes have 1 bit per sample.
https://en.wikipedia.org/wiki/Direct_Stream_Digital
Signed-off-by: Ihar A. Tumashyk <itumashyk@gmail.com>
Reviewed-by: Ganesh Ajjanagadde <gajjanag@mit.edu>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This makes it possible to remove more coded_frame usage without breaking the
publically visible coded_frame
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This parameter can be used to inform the allocation code about how much
downsizing might occur, and can be used to optimize how to allocate the
packet
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
And prevent eventual compilation failures once the relevant functions
and fields are removed.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
With side data now being added to every MPEG*/H26* video encoder
in the form of a quality scalar, software which simply stores
the pkt->data to get an ES stream would break.
This also as a side-effect makes the code faster
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The rationale is that coded_frame was only used to communicate key_frame,
pict_type and quality to the caller, as well as a few other random fields,
in a non predictable, let alone consistent way.
There was agreement that there was no use case for coded_frame, as it is
a full-sized AVFrame container used for just 2-3 int-sized properties,
which shouldn't even belong into the AVCodecContext in the first place.
The appropriate AVPacket flag can be used instead of key_frame, while
quality is exported with the new AVPacketSideData quality factor.
There is no replacement for the other fields as they were unreliable,
mishandled or just not used at all.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Allocating coded_frame is what most encoders do anyway, so it makes
sense to always allocate and free it in a single place. Moreover a lot
of encoders freed the frame with av_freep() instead of the correct API
av_frame_free().
This bring uniformity to encoder behaviour and prevents applications
from erroneusly accessing this field when not allocated. Additionally
this helps isolating encoders that export information with coded_frame,
and heavily simplifies its deprecation.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
internal.h is difficult to use due to circular dependancies
mem.h is a public header ff_* is not public
Alternative solutions probably are possible too
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This should ensure that each frame get its metadata from its proper packet
regardless of frame delays caused by reordering or threading.
Signed-off-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This HWAccel isn't really usable right now due to an nvidia driver bug,
so we don't want it selected by default.
HWAccels have a capabilities field and there's a comment about flags,
but no flags exist today, so let's add one for experimental hwaccels.
* commit 'aef0be08756e00f363c524453c948a6e2a348614':
avcodec: Unref the dummy buffer on the fail path
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This field is designed for marking codec properties useful to lavc internals.
Two internal capabilities are added:
- FF_CODEC_CAP_INIT_THREADSAFE: codec can be opened without locks;
- FF_CODEC_CAP_INIT_CLEANUP: codec frees memory if initialization fails.
Fixes out of array accesses
Fixes: ffmpeg_mjpeg_crash2.avi
Found-by: Thomas Lindroth <thomas.lindroth@gmail.com>
Tested-by: Thomas Lindroth <thomas.lindroth@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a536a4e4bc52d05f59869761337452fb1f1977f6':
lavc: support extracting audio service type from side data
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '728685f37ab333ca35980bd01766c78d197f784a':
Add a side data type for audio service type.
Conflicts:
doc/APIchanges
libavcodec/avcodec.h
libavcodec/version.h
libavutil/frame.h
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This carries the pixel format that would be used if it were not for
hardware acceleration. This is equal to AVCodecContext.pix_fmt if
hardware acceleration is not in use.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
We dont fail hard if its not set as the old API allowed this and our examples
did in the distant past not set it, these examples still work with the
current code and some encoders.
Based on suggestion by: funman
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array read
Fixes: asan_heap-oob_4d2250_814_cov_2745172097_JACOsub_capability_tester.jss
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The application will destroy the underlying hardware handles when
get_format() gets called again. Also this ensures the
deinitialization takes place if the get_format callback returns an
error.
Regression from 1c80c9d7ef.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Fixes: out of array accesses
Fixes: asan_heap-oob_112c6b3_13_012.avi
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is similar to 20a5956b8d
The difference this change makes affects only rather few files
but looks like:
Stream #0:1: Video: mjpeg, 90k tbr, 90k tbn, 90k tbc
vs.
Stream #0:1: Video: mjpeg, none(bt470bg/unknown/unknown), 90k tbr, 90k tbn, 90k tbc
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7ea1b3472a61de4aa4d41b571e99418e4997ad41':
lavc: deprecate the use of AVCodecContext.time_base for decoding
Conflicts:
libavcodec/avcodec.h
libavcodec/h264.c
libavcodec/mpegvideo_parser.c
libavcodec/utils.c
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
When decoding, this field holds the inverse of the framerate that can be
written in the headers for some codecs. Using a field called 'time_base'
for this is very misleading, as there are no timestamps associated with
it. Furthermore, this field is used for a very different purpose during
encoding.
Add a new field, called 'framerate', to replace the use of time_base for
decoding.
* commit '2df0c32ea12ddfa72ba88309812bfb13b674130f':
lavc: use a separate field for exporting audio encoder padding
Conflicts:
libavcodec/audio_frame_queue.c
libavcodec/avcodec.h
libavcodec/libvorbisenc.c
libavcodec/utils.c
libavcodec/version.h
libavcodec/wmaenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Currently, the amount of padding inserted at the beginning by some audio
encoders, is exported through AVCodecContext.delay. However
- the term 'delay' is heavily overloaded and can have multiple different
meanings even in the case of audio encoding.
- this field has entirely different meanings, depending on whether the
codec context is used for encoding or decoding (and has yet another
different meaning for video), preventing generic handling of the codec
context.
Therefore, add a new field -- AVCodecContext.initial_padding. It could
conceivably be used for decoding as well at a later point.
