Used in some HLS streams ("Timed Metadata for HTTP Live Streaming").
This is just ID3 tags at arbitrary stream positions, but I still added
"timed" to the codec name to avoid confusion with regular non-stream ID3
tags.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
We cannot easily determine if an mpeg TS's packet size is DVHS, FEC
or so on, for that we need to expose the internal raw_packet_size
field.
Signed-off-by: Leandro Dorileo <leandro.maciel.dorileo@intel.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This disables NOHEADER after finding PMT for all programs to
avoid find_stream_info always exhausting probe size for mpegts.
This is very important for live streams since read speed
will be limited. rtsp, udp and any protocol streaming a live
mpegts will have dramatically faster startup time.
Note, lack of codec parameters for streams can still cause
the full probe size to be exhausted.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The seek ended up seeking before the begin, which caused problems
Fixes initial sync issues with libbluray
Fixes Ticket3117
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes an infinite loop
An alternative fix would be to revert d73cbc22c5
but that would worsen error resilience.
Found-by: Justin Ruggles
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This avoids the loss of a packet in many cases if the packet size was wrong.
It also improves detection of packet size changes
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
No case is known to have triggered this, but its more correct to check that the
new size differs.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This provides at least some protection against potential accidental
corruption of AVIO buffer workspace.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'c84ea750cf765c9d8845fca5546eb0ae25b9c855':
mpegts: Make discard_pid() faster for single-program streams
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'cabb1681697555e2c319c37c1f30f149207e9434':
mpegts: Remove one memcpy per packet
Conflicts:
libavformat/mpegts.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Changes since v1 of the patch:
- enable option by default
- add documentation
- move up PTS override code after PES header parsing, to ensure we use the
last PCR before the first packet of the teletext PES packet.
The option overrides teletext packet PTS and DTS values with the timestamps
calculated from the PCR of the first program which the teletext stream is part
of and is not discarded.
Using the same teletext PID for multiple programs is possible, therefore we
need some kind of heuristics to know which program PCR we should synchronize
to. Using the first non-discarded PCR pid among the programs of the teletext
stream seemed like a good choice.
The patch does not do PCR interpolation to estimate the PCR of the teltetext
packet, it just uses the last PCR of the program, which may cause a slight
error (0.1 sec) in the teletext packet pts-es.
Based on a patch by Reimar Döffinger.
http://lists.ffmpeg.org/pipermail/ffmpeg-devel/2012-September/131610.html
Signed-off-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The common case of the pointer having increased by one packet (which results
in no change to the modulus) can be detected with a 64-bit subtraction,
which is far cheaper than a division on many platforms.
Before After
Mean StdDev Mean StdDev Change
Divisions 248.3 8.8 51.5 7.4 +381.7%
Overall 2773.2 25.6 2372.5 43.1 +16.9%
Signed-off-by: Martin Storsjö <martin@martin.st>
When a stream contains a single program, there's no point in doing a
PID -> program lookup. Normally the one and only program isn't disabled,
so no packets should be discarded.
Before After
Mean StdDev Mean StdDev Change
discard_pid() 73.8 9.4 20.2 1.5 +264.8%
Overall 2300.8 28.0 2253.1 20.6 +2.1%
Signed-off-by: Martin Storsjö <martin@martin.st>
This was being performed to ensure that a complete packet was held in
contiguous memory, prior to parsing the packet. However, the source buffer
is typically large enough that the packet was already contiguous, so it is
beneficial to return the packet by reference in most cases.
Before After
Mean StdDev Mean StdDev Change
memcpy 720.7 32.7 649.8 25.1 +10.9%
Overall 2372.7 46.1 2291.7 21.8 +3.5%
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'b164d66e35d349de414e2f0d7365a147aba8a620':
ape: make version-dependent decoding functions called via pointers
mpegts: add support for stream_type 0x42, which is CAVS
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a717f9904227d7979473bad40c50eb40af41d01d':
mpegts: Share the cleanup code between the demuxer and lavf-internal parser functions
rtpdec_mpeg4: Return one AAC AU per AVPacket
ppc: Include string.h for memset
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The lavf-internal parser functions are used when receiving
mpegts over RTP. This fixes memory leaks in this setup.
The normal mpegts demuxer close function was updated in ec7d0d2e in
2004 to fix leaks, but the parsing function used for RTP wasn't
updated and has been leaking ever since.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '096abfa15052977eed93f0b5e01afd2d47c53c1f':
parser: fix large overreads
bitstream: add get_bits64() to support reading more than 32 bits at once
arm: detect cpu features at runtime on Linux
Conflicts:
libavcodec/parser.c
libavformat/mpegts.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Also remove a duplicate function in the MPEG-TS demuxer.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
* commit '07584eaf4a95db3f11d3bc411f9786932829e82b':
mpegts: check substreams before discarding
Add a smooth streaming segmenter muxer
file: Add an avoption for disabling truncating existing files on open
img2dec: always close AVIOContexts
rtpdec_jpeg: Error out on other unsupported type values as well
rtpdec_jpeg: Disallow using the reserved q values
rtpdec_jpeg: Fold the default qtables case into an existing if statement
rtpdec_jpeg: Store and reuse old qtables for q values 128-254
rtpdec_jpeg: Simplify the calculation of the number of qtables
rtpdec_jpeg: Add more comments about the fields in the SOF0 section
rtpdec_jpeg: Clarify where the subsampling magic numbers come from
rtpdec_jpeg: Don't use a bitstream writer for the EOI marker
rtpdec_jpeg: Don't needlessly use a bitstream writer for the header
rtpdec_jpeg: Simplify writing of the jpeg header
rtpdec_jpeg: Merge two if statements
rtpdec_jpeg: Write the DHT section properly
Conflicts:
libavformat/Makefile
libavformat/allformats.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
mpc8: return more meaningful error codes.
mpc: return more meaningful error codes.
wv,mpc8: don't return apetag data in packets.
rtmp: do not warn about receiving metadata packets
x86: h264dsp: Adjust YASM #ifdefs
x86: yadif: Mark mmxext optimizations as such
h264: convert loop filter strength dsp function to yasm.
Improve descriptiveness of a number of codec and container long names
Conflicts:
libavcodec/flvdec.c
libavcodec/libopenjpegdec.c
libavformat/apetag.c
libavformat/mp3dec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (24 commits)
flvdec: remove incomplete, disabled seeking code
mem: add support for _aligned_malloc() as found on Windows
lavc: Extend the documentation for avcodec_init_packet
flvdec: remove incomplete, disabled seeking code
http: replace atoll() with strtoll()
mpegts: remove unused/incomplete/broken seeking code
af_amix: allow float planar sample format as input
af_amix: use AVFloatDSPContext.vector_fmac_scalar()
float_dsp: add x86-optimized functions for vector_fmac_scalar()
float_dsp: Move vector_fmac_scalar() from libavcodec to libavutil
lavr: Add x86-optimized function for flt to s32 conversion
lavr: Add x86-optimized function for flt to s16 conversion
lavr: Add x86-optimized functions for s32 to flt conversion
lavr: Add x86-optimized functions for s32 to s16 conversion
lavr: Add x86-optimized functions for s16 to flt conversion
lavr: Add x86-optimized function for s16 to s32 conversion
rtpenc: Support packetizing iLBC
rtpdec: Add a depacketizer for iLBC
Implement the iLBC storage file format
mov: Support muxing/demuxing iLBC
...
Conflicts:
Changelog
configure
libavcodec/avcodec.h
libavcodec/dsputil.c
libavcodec/version.h
libavformat/movenc.c
libavformat/mpegts.c
libavformat/version.h
libavutil/mem.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
mpegts: Make sure we don't return uninitialized packets
gitignore: replace library catch-all pattern by more specific patterns
Conflicts:
.gitignore
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This fixes crashes, where the demuxer could return 0 even
if the returned AVPacket isn't initialized at all. This
could happen if running into EOF or running out of probesize
with non-seekable sources.
Signed-off-by: Martin Storsjö <martin@martin.st>
The mpegts demuxer reads 5 KB at startup just for discovering
the packet size. Since the default avio buffer size is 32 KB,
the seek back to the start will in most cases be within the
avio buffer, and will in most cases succeed even if the actual
protocol isn't seekable.
This makes the demuxer startup faster/with less data when
reading data from a non-seekable input, by not skipping
the first few KB.
If it fails, don't warn if the protocol isn't seekable, making
it behave as before in the failure case.
Signed-off-by: Martin Storsjö <martin@martin.st>
Also add missing trailing commas, break long codec_tag lines and
add spaces in codec_tag declarations.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
make av_interleaved_write_frame() flush packets when pkt is NULL
mpegts: Fix dead error checks
vc1: Do not read from array if index is invalid.
targa: convert to bytestream2.
rv34: set mb_num_left to 0 after finishing a frame
Conflicts:
libavcodec/targa.c
libavcodec/vc1data.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
Fix a bunch of common typos.
build: Skip compiling xvmc.h under the correct condition.
configure: darwin: Change dylib install names to include major version.
mpegts: Always honor a registration descriptor if present and there is no other codec information.
aacdec: Fix SCE parity check.
aacdec: Fix out of array writes (stack).
rtsp: Only set the ttl parameter if the server actually gave a value
udp: Set ttl for read-write streams, too, not only for write-only ones
udp: Only bind to the multicast address if in read-only mode
udp: Clarify the comment about binding the multicast address
udp: Reorder comments
Conflicts:
libavcodec/aacdec.c
tools/patcheck
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
tiertexseq: set correct block_align for audio
tiertexseq: set audio stream start time to 0
voc/avs: Do not change the sample rate mid-stream.
segafilm: use the sample rate as the time base for audio streams
ea: fix audio pts
psx-str: fix audio pts
vqf: set packet duration
tta demuxer: set packet duration
mpegaudio_parser: do not ignore information from the first parsed frame
mpegaudio_parser: be less picky about the start position
thp: set audio packet durations
avcodec: add a Vorbis parser to get packet duration
vorbisdec: read the previous window flag for long windows
lavc: free the output packet when encoding failed or produced no output.
lavc: preserve avpkt->destruct in ff_alloc_packet().
lavc: clarify the meaning of AVCodecContext.frame_number.
mpegts: Pad the packet buffer in handle_packet().
mpegts: Do not call read_sl_header() when no bytes remain in the buffer.
Conflicts:
libavcodec/mpegaudio_parser.c
libavcodec/version.h
libavformat/mpegts.c
tests/ref/fate/pva-demux
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This allows it to be used with get_bits without the thread of overreads.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
