* qatar/master:
mov: Use defines for sample flags in fragments
mov: Use defines for trun flags
mov: Use defines for tfhd flags
proresenc: force bitrate not to exceed given limit
vc1parse: call vc1_init_common().
wma: don't return 0 on invalid packets.
asf: prevent packet_size_left from going negative if hdrlen > pktlen.
mjpegb: don't return 0 at the end of frame decoding.
rtpdec: Identify incorrectly signalled H263
vp8dsp: split long line.
aiff: don't skip block_align==0 check on COMM-after-SSND files.
dpcm: ignore extra unpaired bytes in stereo streams.
mp3on4: require a minimum framesize.
mpc7: assign an error level + context to av_log() msg.
huffyuv: error out on bit overrun.
dct-test: Add the missing ff_ prefix to the altivec functions
dct-test: Remove a stray declaration of a nonexistent function
movenc: Write the unknown duration as 64 bit fields in ismv
movenc: Write track durations with all bits set if duration is unknown
Conflicts:
libavcodec/dct-test.c
libavcodec/wmadec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The previous condition of 0 page size was wrong,
that would disable the mechanism for all frames at
a start of a page, thus some keyframes still would not
get their own granule.
The real problem is that header packets must not be flushed,
but they have (and must have) 0 granule and thus would
be detected as keyframes.
Add a separate parameter to mark header packets.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
This prevents failed assertions further down in the packet processing
where we require non-negative values for packet_size_left.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
H263 in RTP can be packetized in two formats (RFC 2190, RFC
2429/4629). The former normally uses the static payload type 34,
while the latter normally uses dynamic payload types with the
SDP format names H263-1998 or H263-2000.
Look for packets that don't look like proper RFC 2190 packets and
switch to depacketizing them according to the new format if they
match some heuristic criteria.
Signed-off-by: Martin Storsjö <martin@martin.st>
In order to match Linux behaviour better our
Windows-specific open() replacement should disable
Windows default file locking.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
This needs the extradata to be extracted.
The approach used is the one MPlayer uses, though it is
unclear whether the 4 bytes extradata that are skipped
should be skipped always or only for AAC.
The AAC parser must be disabled, too, otherwise playback
still does not work.
Fixes trac issue #547.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* qatar/master: (22 commits)
als: prevent infinite loop in zero_remaining().
cook: prevent div-by-zero if channels is zero.
pamenc: switch to encode2().
svq1enc: switch to encode2().
dvenc: switch to encode2().
dpxenc: switch to encode2().
pngenc: switch to encode2().
v210enc: switch to encode2().
xwdenc: switch to encode2().
ttadec: use branchless unsigned-to-signed unfolding
avcodec: add a Sun Rasterfile encoder
sunrast: Move common defines to a new header file.
cdxl: fix video decoding for some files
cdxl: fix audio for some samples
apetag: add proper support for binary tags
ttadec: remove dead code
swscale: make access to filter data conditional on filter type.
swscale: update context offsets after removal of AlpMmxFilter.
prores: initialise encoder and decoder parts only when needed
swscale: make monowhite/black RGB-independent.
...
Conflicts:
Changelog
libavcodec/alsdec.c
libavcodec/dpxenc.c
libavcodec/golomb.h
libavcodec/pamenc.c
libavcodec/pngenc.c
libavformat/img2.c
libswscale/output.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
According to 14496-12, the duration should be all 1s if
the duration is unknown. This is the case if writing a moov
atom without any samples described in it (e.g. as in ismv files).
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows handling matroska files with errors.
Fixes test4.mkv and test7.mkv from the official Matroska test suite.
These are also trac issues #544 and #545.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Muxing pcm audio in MOV using avcodec_encode_audio() was failing
because avcodec_encode_audio() returns an incorrect packet size of 4
bytes. This can be reproduced by modifying the sample
ffmpeg/doc/examples/muxing.c to encode PCM, see ML patch
muxing-test.diff
I git bisected and commit 89ddff92a3 is the one that broke this. In
mov_write_header() if st->codec->frame_size <= 1 it sets it to 1. Then
avcodec_encode_audio() sets frame->nb_samples = avctx->frame_size, and
frame->nb_samples of 1 is used to compute a packet size of 4 bytes.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
shorten: Use separate pointers for the allocated memory for decoded samples.
atrac3: Fix crash in tonal component decoding.
ws_snd1: Fix wrong samples counts.
movenc: Don't set a default sample duration when creating ismv
rtp: Factorize the check for distinguishing RTCP packets from RTP
golomb: avoid infinite loop on all-zero input (or end of buffer).
bethsoftvid: synchronize video timestamps with audio sample rate
bethsoftvid: add audio stream only after getting the first audio packet
bethsoftvid: Set video packet duration instead of accumulating pts.
bethsoftvid: set packet key frame flag for audio and I-frame video packets.
bethsoftvid: fix read_packet() return codes.
bethsoftvid: pass palette in side data instead of in a separate packet.
sdp: Ignore RTCP packets when autodetecting RTP streams
proresenc: initialise 'sign' variable
mpegaudio: replace memcpy by SIMD code
vc1: prevent using last_frame as a reference for I/P first frame.
Conflicts:
libavcodec/atrac3.c
libavcodec/golomb.h
libavcodec/shorten.c
libavcodec/ws-snd1.c
tests/ref/fate/bethsoft-vid
Merged-by: Michael Niedermayer <michaelni@gmx.at>
According to unofficial documentation, the video rate is locked to the audio
sample rate. This results in proper synchronization of audio and video
timestamps from the demuxer. This only works if the first audio packet occurs
before the first video packet or the audio sample rate is the default rate of
11111 Hz, both of which are true for all samples in our archive.
This avoids initializing a stream with dummy values or when the file does not
contain audio.
Also set duration for audio packets, using the sample rate as the time base.
Update FATE reference to account for now non-existent palette packet.
This also fixes the FATE test if frame data is not initialized in
get_buffer(), so update comment in avconv accordingly.
The rtp demuxer which listens for RTP packets and detects the
RTP payload type will currently get confused if the first packet
received is an RTCP packet. Thus ignore such packets.
Signed-off-by: Martin Storsjö <martin@martin.st>
Prefix the functions/tables brktimegm, pcm_read_seek,
dv_offset_reset, voc_get_packet, codec_movaudio_tags,
codec_movvideo_tags.
After this, lavf has no global symbols without the proper prefix.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master: (21 commits)
CDXL demuxer and decoder
hls: Re-add legacy applehttp name to preserve interface compatibility.
hlsproto: Rename the functions and context
hlsproto: Encourage users to try the hls demuxer instead of the proto
doc: Move the hls protocol section into the right place
libavformat: Rename the applehttp protocol to hls
hls: Rename the functions and context
libavformat: Rename the applehttp demuxer to hls
rtpdec: Support H263 in RFC 2190 format
rv30: check block type validity
ttadec: CRC checking
movenc: Support muxing VC1
avconv: Don't split out inline sequence headers when stream copying VC1
rv34: handle size changes during frame multithreading
rv40: prevent undefined signed overflow in rv40_loop_filter()
rv34: use AVERROR return values in ff_rv34_decode_frame()
rv34: use uint16_t for RV34DecContext.deblock_coefs
librtmp: Add "lib" prefix to librtmp URLProtocol declarations.
movenc: Use defines instead of hardcoded numbers for RTCP types
smjpegdec: implement seeking
...
Conflicts:
Changelog
doc/general.texi
libavcodec/avcodec.h
libavcodec/rv30.c
libavcodec/tta.c
libavcodec/version.h
libavformat/Makefile
libavformat/allformats.c
libavformat/version.h
libswscale/x86/swscale_mmx.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Keep the old protocol name around for backwards compatibility
until the next bump.
Deprecate the method of implicitly assuming the nested protocol.
For applehttp://server/path, it might have felt logical, but
supporting hls://server/path isn't quite as intuitive. Therefore
only support hls+http://server/path from now on.
Using this protocol at all is discouraged, since the hls demuxer
is more complete and fits into the architecture better. There
have been cases where the protocol implementation worked better
than the demuxer, but this should no longer be the case.
Signed-off-by: Martin Storsjö <martin@martin.st>
When this demuxer was created, there didn't seem to be any
consensus of a common short name for this protocol. Now
the consensus seems to be to call it hls.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is different from the "modern" RTP payload formats for H263
as defined by RFC 4629, 2429 and 3555. According to the newer RFCs,
this old one is to be considered deprecated and only be used for
interoperating with legacy systems.
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows easily differentiating between both implementations within the build
system and combining the native implementation for plain RTMP with librtmp for
the RTMPE, RTMPS, RTMPT, RTMPTE protocol variants.
* qatar/master:
rtpdec: Use 4 byte startcodes for H.264
matroskadec: Mark variable as av_unused.
Move some conditionally used variables into the block where they are used.
Drop some completely unnecessary av_unused attributes.
swscale: Remove unused variable alpMmxFilter.
Drop unnecessary av_uninit attributes from some variable declarations.
movenc: Support muxing wmapro in ismv/isma
mpegtsenc: Add an AVOption for forcing a new PAT/PMT/SDT to be written
swscale: move YUV2PACKED16WRAPPER() macro down to where it is used.
swscale: handle gray16 as a "planar" YUV format (Y-only, of course).
swscale: use yuv2packed1() functions for unscaled chroma also.
swscale: fix incorrect chroma bias in yuv2rgb48_1_c().
swscale: fix invalid memory accesses in yuvpacked1() functions.
Move PS2 MMI code below the mips subdirectory, where it belongs.
mips: Move MMI function declarations to a header.
build: Set correct dependencies for rtmp* protocols implemented by librtmp.
Conflicts:
libavcodec/ac3enc_template.c
libavformat/mpegtsenc.c
libswscale/output.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
If muxing into mpegts, 4 byte startcodes for the first NAL
of an access unit is required. Thus it is simplest for the
RTP depacketizer to just use 4 byte startcodes everywhere.
Signed-off-by: Martin Storsjö <martin@martin.st>
In particular, detect when the index is obviously broken.
This fixes the worst symptoms of trac issue #958 and makes
sense to allow seeking in files without index.
However it is possible that there still is an index parsing bug
with that file.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Otherwise when we run into levels beyond the max. allowed
playback will be permanently broken.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
When segmenting the output from the mpegts muxer, one can
now set this option when cutting to a new segment, to make sure
the next segment starts with PAT/PMT/SDT.
Signed-off-by: Martin Storsjö <martin@martin.st>
To make seeking work correctly, we must write a new granule for
each keyframe.
Unfortunately we currently have no regression tests due to no
included Theora encoder.
A test based on -vcodec copy from a Theora FATE sample should
probably be added.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
This is so that TS fragments produced by
http://code.google.com/p/httpsegmenter/
would be compatible with JW Player.
A new member variable prev_payload_key was added to MpegTSWriteStream
to help detect transition from non-key to key frame, so that
PAT/PMT would not be produced for every keyframe in intra-only videos.
Signed-off-by: Pavel Koshevoy <pkoshevoy@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (38 commits)
v210enc: remove redundant check for pix_fmt
wavpack: allow user to disable CRC checking
v210enc: Use Bytestream2 functions
cafdec: Check return value of avio_seek and avoid modifying state if it fails
yop: Check return value of avio_seek and avoid modifying state if it fails
tta: Check return value of avio_seek and avoid modifying state if it fails
tmv: Check return value of avio_seek and avoid modifying state if it fails
r3d: Check return value of avio_seek and avoid modifying state if it fails
nsvdec: Check return value of avio_seek and avoid modifying state if it fails
mpc8: Check return value of avio_seek and avoid modifying state if it fails
jvdec: Check return value of avio_seek and avoid modifying state if it fails
filmstripdec: Check return value of avio_seek and avoid modifying state if it fails
ffmdec: Check return value of avio_seek and avoid modifying state if it fails
dv: Check return value of avio_seek and avoid modifying state if it fails
bink: Check return value of avio_seek and avoid modifying state if it fails
Check AVCodec.pix_fmts in avcodec_open2()
svq3: Prevent illegal reads while parsing extradata.
remove ParseContext1
vc1: use ff_parse_close
mpegvideo parser: move specific fields into private context
...
Conflicts:
libavcodec/4xm.c
libavcodec/aacdec.c
libavcodec/h264.c
libavcodec/h264.h
libavcodec/h264_cabac.c
libavcodec/h264_cavlc.c
libavcodec/mpeg4video_parser.c
libavcodec/svq3.c
libavcodec/v210enc.c
libavformat/cafdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (26 commits)
eac3dec: replace undefined 1<<31 with INT32_MIN in noise generation
yadif: specify array size outside DECLARE_ALIGNED
prores: specify array size outside DECLARE_ALIGNED brackets.
WavPack demuxer: set packet duration
tta: use skip_bits_long()
mxfdec: Ignore the last entry in Avid's index table segments
mxfdec: Sanity-check SampleRate
mxfdec: Handle small EditUnitByteCount
mxfdec: Consider OPAtom files that do not have exactly one EC to be OP1a
mxfdec: Don't crash in mxf_packet_timestamps() if current_edit_unit overflows
mxfdec: Zero nb_ptses in mxf_compute_ptses_fake_index()
mxfdec: Sanity check PreviousPartition
mxfdec: Never seek back in local sets and KLVs
mxfdec: Move the current_partition check inside mxf_read_header()
mxfdec: Fix infinite loop in mxf_packet_timestamps()
mxfdec: Check eof_reached in mxf_read_local_tags()
mxfdec: Check for NULL component
mxfdec: Make sure mxf->nb_index_tables > 0 in mxf_packet_timestamps()
mxfdec: Make sure x < index_table->nb_ptses
build: Add missing directories to DIRS declarations.
...
Conflicts:
doc/build_system.txt
doc/fate.texi
libavfilter/x86/yadif_template.c
libavformat/mxfdec.c
libavutil/Makefile
tests/fate/audio.mak
tests/fate/prores.mak
tests/fate/screen.mak
tests/fate/video.mak
tests/ref/fate/bethsoft-vid
tests/ref/fate/cscd
tests/ref/fate/dfa4
tests/ref/fate/nuv
tests/ref/fate/vp8-sign-bias
tests/ref/fate/wmv8-drm
tests/ref/lavf/gxf
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The last entry is the total size of the essence container.
Previously a TemporalOffset error would be logged, even though
segments like these are expected.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
These are common with audio atoms. Without this the demuxer would read two
bytes at a time for a mono 16-bit file.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Specially crafted files can lead the parsing code to take too long.
We fix a lot of these problems by not allowing local tags to extend
past the end of the set and not allowing other KLVs to be read past
the end of themselves.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
This can happen if an index table segment has a very large IndexStartPosition.
zzuf3.mxf is an example of such a file.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Only the OPAtom demuxing logic is guaranteed to have index tables,
meaning OP1a files that lack an index would cause SIGSEGV.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
* qatar/master:
Revert "v210enc: use FFALIGN()"
doxygen: Do not include license boilerplates in Doxygen comment blocks.
avplay: reset decoder flush state when seeking
ape: skip packets with invalid size
ape: calculate final packet size instead of guessing
ape: stop reading after the last frame has been read
ape: return AVERROR_EOF instead of AVERROR(EIO) when demuxing is finished
ape: return error if seeking to the current packet fails in ape_read_packet()
avcodec: Clarify AVFrame member documentation.
v210dec: check for coded_frame allocation failure
v210enc: use stride as it is already calculated
v210enc: use FFALIGN()
v210enc: return proper AVERROR codes instead of -1
v210enc: do not set coded_frame->key_frame
v210enc: check for coded_frame allocation failure
drawtext: add 'fix_bounds' option on coords fixing
drawtext: fix text_{w, h} expression vars
drawtext: add missing braces around an if() block.
Conflicts:
libavcodec/arm/vp8.h
libavcodec/arm/vp8dsp_init_arm.c
libavcodec/v210dec.c
libavfilter/vf_drawtext.c
libavformat/ape.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
A lot of files do not mark keyframes correctly via
granule, so detect keyframe or not based on data
and complain if it mismatches.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Calculates based on total file size and wavetaillength from the header.
Falls back to multiplying finalframeblocks by 8 instead of 4 so that it will
at least be overestimating for 24-bit. Currently it can underestimate the
final packet size, leading to decoding errors.
It would never be called when the searched-for position
was already in the index.
In the other cases, the ogg_reset at the end of the
read_timestamp function handled it.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
In this case, the pts values will be delayed by one, but
at the same time pts values might only be supplied for e.g.
keyframes.
This results on only the frame after the keyframe having a
pts value.
As a hack, make read_timestamp return the keyframe position
together with the pts from a following frame when seeking
to a keyframe.
Fixes trac issue #438.
However it causes the read_timestamp function to return a
pos value that is actually before the packet with the
indicated pts.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
We can handle v4 just fine, the parts we currently use
are the same for v3 and v4.
v4 can in addition contain an index which we so far do
not use though.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Fixes trac issue #438.
Seeking in that sample would cause ogg_read_timestamp to fail
because ogg_packet would go into a state where all packets
of stream 1 would be discarded until the end of the stream.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Right now those muxers use the default timebase in all cases(1/90000).
This patch avoid unnecessary rescaling and makes the printed timestamps
more readable.
Also, extend the printed information to include the timebases and packet
pts/duration and align the columns.
Obviously changes the results of all fate tests which use those two
muxers.
* qatar/master:
libx264: fix indentation.
vorbis: fix overflows in floor1[] vector and inverse db table index.
win64: add a XMM clobber test configure option.
movdec: Parse the dvc1 atom
ARM: ac3: fix ac3_bit_alloc_calc_bap_armv6
swscale: K&R formatting cosmetics for Blackfin code
frwu: lowercase the FRWU codec name
movdec: fix dts generation in fragmented files
fate: make acodec-ac3_fixed test output raw AC3
APIchanges: add missing commit hashes
swscale: implement MMX, SSE2 and AVX functions for RGB32 input.
ra144enc: drop pointless "encoder" from .long_name
bethsoftvideo: fix palette reading.
mpc7: use av_fast_padded_malloc()
mpc7: simplify handling of packet sizes that are not a multiple of 4 bytes
doc: decoding Forward Uncompressed is supported
Fix a typo in the x86 asm version of ff_vector_clip_int32()
pcmenc: Do not set avpkt->size.
ff_alloc_packet: modify the size of the packet to match the requested size
Conflicts:
doc/APIchanges
libavcodec/libx264.c
libavcodec/mpc7.c
libavformat/isom.h
libswscale/Makefile
libswscale/bfin/yuv2rgb_bfin.c
tests/ref/fate/bethsoft-vid
tests/ref/seek/ac3_ac3
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Normally, the actual payload data contains sequence headers, too,
and the parser can extract this and set it as extradata. However,
the data in the dvc1 atom is the "official" extradata for the file.
This is required for proper stream copy of vc1 from ismv to ismv.
Signed-off-by: Martin Storsjö <martin@martin.st>
Do not use AVStream's duration for dts generation since it contains in
some cases the duration of the whole file instead of duration of the
samples in the moov. This happens if the mdhd holds the duration of the
whole file but has no entries or a zero duration in its stts.
* qatar/master: (22 commits)
frwu: Employ more meaningful return values.
fraps: Use av_fast_padded_malloc() instead of av_realloc()
mjpegdec: use av_fast_padded_malloc()
eatqi: use av_fast_padded_malloc()
asv1: use av_fast_padded_malloc()
avcodec: Add av_fast_padded_malloc().
swscale: enable dithering in MMX functions.
swscale: make rgb24 function macros slightly smaller.
avcodec.h: Remove some disabled cruft.
swscale: remove obsolete comment.
swscale-test: Drop unused argc and argv arguments from main().
zmbv: Employ more meaningful return values.
zmbvenc: Employ more meaningful return values.
vc1: prevent null pointer dereference on broken files
zmbv: check av_realloc() return values and avoid memleaks on ENOMEM
truespeech: align buffer
ac3: Do not read past the end of ff_ac3_band_start_tab.
dv: Fix small stack overread related to CVE-2011-3929 and CVE-2011-3936.
dv: Fix null pointer dereference due to ach=0
dv: check stype
...
Conflicts:
doc/APIchanges
libavcodec/asv1.c
libavcodec/avcodec.h
libavcodec/eatqi.c
libavcodec/fraps.c
libavcodec/frwu.c
libavcodec/zmbv.c
libavformat/dv.c
libswscale/swscale.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
dv: Fix null pointer dereference due to ach=0
Fixes part2 of CVE-2011-3929
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Reviewed-by: Roman Shaposhnik <roman@shaposhnik.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Alex Converse <alex.converse@gmail.com>
dv: check stype
Fixes part1 of CVE-2011-3929
Possibly fixes part of CVE-2011-3936
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Reviewed-by: Roman Shaposhnik <roman@shaposhnik.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Alex Converse <alex.converse@gmail.com>
* qatar/master: (29 commits)
fate: add golomb-test
golomb-test: K&R formatting cosmetics
h264: Split h264-test off into a separate file - golomb-test.c.
h264-test: cleanup: drop timer invocations, commented out code and other cruft
h264-test: Remove unused DSP and AVCodec contexts and related init calls.
adpcm: Add missing stdint.h #include to fix standalone header compilation.
lavf: add functions for accessing the fourcc<->CodecID mapping tables.
lavc: set AVCodecContext.codec in avcodec_get_context_defaults3().
lavc: make avcodec_close() work properly on unopened codecs.
lavc: add avcodec_is_open().
lavf: rename AVInputFormat.value to raw_codec_id.
lavf: remove the pointless value field from flv and iv8
lavc/lavf: remove unnecessary symbols from the symbol version script.
lavc: reorder AVCodec fields.
lavf: reorder AVInput/OutputFormat fields.
mp3dec: Fix a heap-buffer-overflow
adpcmenc: remove some unneeded casts
adpcmenc: use int16_t and uint8_t instead of short and unsigned char.
adpcmenc: fix adpcm_ms extradata allocation
adpcmenc: return proper AVERROR codes instead of -1
...
Conflicts:
doc/APIchanges
libavcodec/Makefile
libavcodec/adpcmenc.c
libavcodec/avcodec.h
libavcodec/h264.c
libavcodec/libavcodec.v
libavcodec/mpc7.c
libavcodec/mpegaudiodec.c
libavcodec/options.c
libavformat/Makefile
libavformat/avformat.h
libavformat/flvdec.c
libavformat/libavformat.v
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This way, if the AVCodecContext is allocated for a specific codec, the
caller doesn't need to store this codec separately and then pass it
again to avcodec_open2().
It also allows to set codec private options using av_opt_set_* before
opening the codec.
It allows to check whether an AVCodecContext is open in a documented
way. Right now the undocumented way this check is done in lavf/lavc is
by checking whether AVCodecContext.codec is NULL. However it's desirable
to be able to set AVCodecContext.codec before avcodec_open2().
