Commit Graph

203 Commits

Author SHA1 Message Date
Mans Rullgard
88ff180ad6 ARM: update ff_h264_idct8_add4_neon for 4:4:4 changes
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-06-15 13:19:40 +01:00
Mans Rullgard
e897a633cd ARM: factor some repetitive code into macros
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-06-14 10:43:54 +01:00
Jason Garrett-Glaser
c90b94424c 4:4:4 H.264 decoding support
Note: this is 4:4:4 from the 2007 spec revision, not the previous (now deprecated) 4:4:4 mode in H.264.
2011-06-13 21:16:30 -07:00
Mans Rullgard
9776e25db9 ARM: jrevdct_arm: simplify stack usage
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-06-13 12:30:22 +01:00
Mans Rullgard
13743c7ab0 ARM: jrevdct_arm: use push/pop mnemonics
Use push/pop instead of stmdb/ldmia for stack operations.  This
is the preferred syntax.

Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-06-13 12:30:22 +01:00
Mans Rullgard
77cdfde73e ARM: jrevdct_arm: misc cleanup
- use 'const' macro to define coeff table
- add missing endfunc
- remove superflous directives

Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-06-13 12:30:22 +01:00
Mans Rullgard
5c46ad1da0 ARM: optimised mpadsp_apply_window_fixed
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-06-13 11:33:44 +01:00
Mans Rullgard
21c6512542 ARM: remove MUL64 and MAC64 inline asm
Current GCC versions know how to generate these instructions
properly and avoiding inline asm gives better code.  The MULH
function for ARMv5 uses the same instruction and is also not
needed any more.

The MLS64 macro remains since negating an input would normally
not be allowed as it would fail for INT_MIN.  In our uses, the
inputs never have this value and thus negating is safe.

Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-06-06 17:33:40 +01:00
Mans Rullgard
594fbe42c6 ARM: remove MULL inline asm
Reasonable gcc versions get this one right on their own.

Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-06-04 21:33:23 +01:00
Mans Rullgard
8e112df409 ARM: ac3dsp: optimised update_bap_counts()
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-06-01 15:45:13 +01:00
Mans Rullgard
c51695dbf6 ARM: fix MUL64 inline asm for pre-armv6
Prior to ARMv6, the destination registers of the SMULL instruction
must be distinct from the first source register.  Marking the
output early-clobber ensures it is allocated unique registers.

This restriction is dropped in ARMv6 and later, so allowing overlap
between input and output registers there might give better code.

Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-05-31 22:21:00 +01:00
Mans Rullgard
6bb70dfd74 ARM: simplify inline asm with 64-bit operands
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-05-30 21:19:57 +01:00
Mans Rullgard
371266daa3 ARM: enable UAL syntax in asm.S
This enables UAL syntax for all asm files instead of only those
which happen to be incompatible with the old, deprecated syntax.

Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-05-29 15:42:56 +01:00
Mans Rullgard
edfa89b260 ARM: unbreak build
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-05-28 18:41:20 +01:00
Justin Ruggles
6ca23db9cc ac3enc: modify mantissa bit counting to keep bap counts for all values of bap
instead of just 0 to 4.

This does all the actual bit counting as a final step.
2011-05-28 12:39:28 -04:00
Mans Rullgard
7d8c17b5f6 ARM: aacdec: fix constraints on inline asm
This adds output operands for modified memory allowing the
volatile qualifiers to be dropped.

Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-05-28 15:00:17 +01:00
Mans Rullgard
84e4804ad0 ARM: remove unnecessary volatile from inline asm
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-05-28 15:00:17 +01:00
Mans Rullgard
5726ec171b ARM: add "cc" clobbers to inline asm where needed
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-05-28 15:00:17 +01:00
Mans Rullgard
79aeade6f6 ARM: disable ff_vector_fmul_vfp on VFPv3 systems
This function uses old-style vector operations deprecated in VFPv3.
Some implementations, e.g. Cortex-A9, support them only through
slow software emulation.  Cortex-A8 does have this functionality
in hardware, but as it also has NEON, this function is not used
there regardless.

Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-05-27 20:33:06 +01:00
Diego Biurrun
153382e1b6 multiple inclusion guard cleanup
Add missing multiple inclusion guards; clean up #endif comments;
add missing library prefixes; keep guard names consistent.
2011-05-21 13:48:10 +02:00
Martin Aumüller
b1eb7a1204 arm: properly mark external symbol call
Surround memset and ff_vp8_dct_cat_prob by X() in order to fix iOS build

Includes patch by Luca Barbato <lu_zero@gentoo.org>.

Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2011-05-14 10:38:23 +02:00
Ronald S. Bultje
b27b54de31 arm/h264pred: add missing argument type. 2011-05-10 08:44:49 -04:00
Oskar Arvidsson
19a0729b4c Adds 8-, 9- and 10-bit versions of some of the functions used by the h264 decoder.
This patch lets e.g. dsputil_init chose dsp functions with respect to
the bit depth to decode. The naming scheme of bit depth dependent
functions is <base name>_<bit depth>[_<prefix>] (i.e. the old
clear_blocks_c is now named clear_blocks_8_c).

Note: Some of the functions for high bit depth is not dependent on the
bit depth, but only on the pixel size. This leaves some room for
optimizing binary size.

Preparatory patch for high bit depth h264 decoding support.

Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-05-10 07:24:36 -04:00
Mans Rullgard
5f2e6c0fd1 ac3enc: NEON optimised extract_exponents
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-04-05 01:11:16 +01:00
Mans Rullgard
f7653904c8 ARM: NEON fixed-point forward MDCT
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-04-03 22:39:52 +01:00
Mans Rullgard
dba9852935 ARM: NEON fixed-point FFT
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-04-03 22:39:52 +01:00
Mans Rullgard
aa05f2126e ac3enc: ARM optimised ac3_compute_matissa_size
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-04-01 22:46:21 +01:00
Mans Rullgard
182826c884 ac3: armv6 optimised bit_alloc_calc_bap
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-04-01 22:46:05 +01:00
Mans Rullgard
d782bca415 ac3enc: NEON optimised float_to_fixed24
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-03-29 19:40:13 +01:00
Mans Rullgard
d743065e18 ARM: fix ff_apply_window_int16_neon() prototype
The length argument should be unsigned.  No change in code.

Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-03-24 20:43:47 +00:00
Mans Rullgard
2d3b21ffb9 ARM: NEON optimised apply_window_int16()
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-03-24 19:24:03 +00:00
Mans Rullgard
245c78313f ac3enc: NEON optimised shift functions 2011-03-24 16:30:54 +00:00
Mans Rullgard
f4855a904e ac3enc: NEON optimised ac3_max_msb_abs_int16 and ac3_exponent_min 2011-03-24 16:30:49 +00:00
Mans Rullgard
0aded9484d Move dct and rdft definitions to separate files
This leaves fft.h with only the core FFT and MDCT definitions
thus making it more managable.

Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-03-20 17:15:33 +00:00
Mans Rullgard
2912e87a6c Replace FFmpeg with Libav in licence headers
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-03-19 13:33:20 +00:00
Mans Rullgard
0b32da90f8 ARM: VP8: fix build on systems with global symbol prefix
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-02-27 13:53:26 +00:00
Mans Rullgard
8b454c352f ARM: fix vp8 neon with pic enabled
The assembler emits literal pools too far from the load instructions,
so we must do it explicitly at a suitable location.

Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-02-27 13:53:21 +00:00
Loren Merritt
e6b1ed693a FFT: factor a shuffle out of the inner loop and merge it into fft_permute.
6% faster SSE FFT on Conroe, 2.5% on Penryn.

Signed-off-by: Janne Grunau <janne-ffmpeg@jannau.net>
2011-02-13 15:36:39 +01:00
Mans Rullgard
a7878c9f73 VP8: ARM optimised decode_block_coeffs_internal
Approximately 5% faster on Cortex-A8.

Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-02-11 15:48:11 +00:00
Mans Rullgard
7da48fd011 ARM optimised vp56_rac_get_prob()
Approximately 3% faster on Cortex-A8.

Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-02-11 15:48:10 +00:00
Mans Rullgard
a1c1d3c003 VP8: ARM NEON optimisations for dsp functions
This adds NEON optimised versions of all functions in VP8DSPContext.
Based on initial work by Rob Clark.

Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-02-07 16:08:23 +00:00
Mans Rullgard
b9a639ddd6 ARM: add helper macro for declaring constant data
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-02-02 11:35:51 +00:00
Justin Ruggles
c73d99e672 Separate format conversion DSP functions from DSPContext.
This will be beneficial for use with the audio conversion API without
requiring it to depend on all of dsputil.

Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-02-02 02:44:53 +00:00
Justin Ruggles
80ba1ddb58 Remove unneeded add bias from 3 functions.
DSPContext.vector_fmul_window()
DCADSPContext.lfe_fir()
SynthFilterContext.synth_filter_float()

Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-01-31 20:28:42 +00:00
Mans Rullgard
d461a47317 Rearrange MpegEncContext to simplify access from asm
This moves the fields needed by asm near the top, before any
structs or other members which complicate the offset calculation.
Modifying other structs will no longer require updating the offsets,
and the asm code is slightly simpler due to the smaller offsets.

Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-01-29 17:14:29 +00:00
Mans Rullgard
0745116c10 ARM: update MpegEncContext offsets 2011-01-29 04:39:39 +00:00
Mans Rullgard
78f318be59 ARM: NEON: fix overflow in h264 16x16 planar pred
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-01-24 14:59:46 +00:00
Justin Ruggles
6eabb0d3ad Change DSPContext.vector_fmul() from dst=dst*src to dest=src0*src1.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-01-22 17:53:27 +00:00
Justin Ruggles
56f8952b25 Move lpc_compute_autocorr() from DSPContext to a new struct LPCContext.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-01-21 19:58:59 +00:00
Janne Grunau
2c3589bfda consolidate .gitignore patters into a single file
Signed-off-by: Janne Grunau <janne-ffmpeg@jannau.net>
2011-01-18 21:32:05 +01:00