Update the fate reference since the last broken frame is not decoded
anymore.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
The bug it was working seems to have been fixed.
This change causes ffmpeg to use the trim filter to implement
the -t option.
FATE tests are updated due to the more accurate handling of
the last packets.
for the n0=0 case there are multiple solutions and different
platforms pick different ones
This should reduce the issues with fate and the timefilter test
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The option is used to sort the streams by program.
Signed-off-by: Florent Tribouilloy <florent.tribouilloy@smartjog.com>
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
When operating on subsampled chroma planes, some rounding is taking
place. The left and top borders are rounded down while the width and
height are rounded up, so all rounding is done outward to guarantee the
logo area is fully covered.
The problem is that the width and height are counted from the
unrounded left and top borders, respectively. So if the left or top
border position has indeed been rounded down, and the width or height
needs no rounding (up), the position of the the right or bottom border
will be effectively rounded down, i.e. inward.
The issue can easily be seen with a yuv240p input and
-vf delogo=45:45:60:40:show=1 -vframes 1 delogo-bug.png
(or virtually any logo area with odd x and y and even width and
height.) The right and bottom chroma borders (in green) are clearly
off.
In order to fix this, the width and height must be adjusted to include
the bits lost in the rounding of the left and top border positions,
respectively, prior to being themselves rounded up.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The original delogo algorithm interpolates both horizontally and
vertically and uses the average to compute the resulting sample. This
works reasonably well when the logo area is almost square. However
when the logo area is significantly larger than high or higher than
large, the result is largely suboptimal.
The issue can be clearly seen by testing the delogo filter with a fake
logo area that is 200 pixels large and 2 pixels high. Vertical
interpolation gives a very good result in that case, horizontal
interpolation gives a very bad result, and the overall result is poor,
because both are given the same weight.
Even when the logo is roughly square, the current algorithm gives poor
results on the borders of the logo area, because it always gives
horizontal and vertical interpolations an equal weight, and this is
suboptimal on borders. For example, in the middle of the left hand
side border of the logo, you want to trust the left known point much
more than the right known point (which the current algorithm already
does) but also much more than the top and bottom known points (which
the current algorithm doesn't do.)
By properly weighting each known point when computing the value of
each interpolated pixel, the visual result is much better, especially
on borders and/or for high or large logo areas.
The algorithm I implemented guarantees that the weight of each of the
4 known points directly depends on its distance to the interpolated
point. It is largely inspired from the original algorithm, the key
difference being that it computes the relative weights globally
instead of separating the vertical and horizontal interpolations and
combining them afterward.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
Also replace custom tests for MD5 with those published in RFC 2202
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This more evenly distributes the load between threads
This also fixes the chroma filtering where the filter was applied twice
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array writes
No FFmpeg release is affected by this
This also fixes some artifacts
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '8e673efc6f5b7a095557664660305148f2788d30':
prores: update FATE test to account for alpha plane present in the test sample
configure: Add basic valgrind-massif support
Conflicts:
tests/fate/prores.mak
tests/ref/fate/prores-alpha
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This replaces a large number of checks for the second field by
fixing the pointers when they are setup.
This should also fix I/BI field pictures.
Changes checksums for vc1_sa10143, the file becomes slightly closer
to what the reference decoder outputs.
Based on "vc1dec: the second field is written wrong to the picture"
by Sebastian Sandberg <sebastiand.sandberg@gmail.com>.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is the first 2 MB of the official test7.mkv.
That length seems to be enough to detect the bugs
we had in our code so far.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* commit 'e036bb7899d0faca9159206be9bf5552e76e7633':
lavc: clear AVBuffers on decoded frames if refcounted_frames is not set
FATE: add an additional indeo3 test
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This makes -t sample-accurate for audio and will allow further
simplication in the future.
Most of the FATE changes are due to audio now being sample accurate. In
some cases a video frame was incorrectly passed with the old code, while
its was over the limit.
The sample is already included in the FATE suite, but is not tested
because cropping wasn't fully supported before.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* qatar/master:
avcodec: Bump minor for JPEG 2000 decoder
JPEG 2000 decoder for DCinema
The mqc code is merged, the rest is added independent of
the existing jpeg2000 decoder and encoder.
Conflicts:
Changelog
doc/general.texi
libavcodec/Makefile
libavcodec/allcodecs.c
libavcodec/mqc.c
libavcodec/mqc.h
libavcodec/mqcdec.c
libavcodec/version.h
tests/fate/video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Based on the 2007 GSoC project from Kamil Nowosad <k.nowosad@students.mimuw.edu.pl>
Updated to current programming standards, style and many more small
fixes by Diego Biurrun <diego@biurrun.de>.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
The encoder now doesn't produce any extra graphic control extension
block anymore. Only the image is encoded, and the muxer writing
its own GCE containing notably the timing information now includes the
optional palette transmitted through packet side data.
This commit avoid setting clashes between the two GCE, and reduce the
size of the generated file with pal8 output.
* qatar/master:
FATE: add a test for the interlace filter
lavfi: new interlace filter
Conflicts:
Changelog
configure
doc/filters.texi
libavfilter/Makefile
libavfilter/allfilters.c
tests/fate/filter.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Text subtitles packets are not 0-terminated (and if they are,
it is handled by the recoding process since 0 is a valid
Unicode code point). The terminating 0 would overwrite the
last payload octet.
OTOH, packets must be 0-padded.
Fix a problem reported in trac ticket #2431.
* commit '43a8333a16c796b3d855fb3aaa742103cb62731f':
FATE: add a test for the channelsplit filter
FATE: add a test for the channelmap filter
FATE: add a test for the negate filter
FATE: add a test for the overlay filter
Conflicts:
tests/fate/filter.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ea290d919a52f0f8c7e30d69328bb011ed13f61a':
FATE: add a test for the setpts filter
FATE: add a test for the hqdn3d filter
FATE: add a test for the transpose filter
FATE: add a test for the unsharp filter
Conflicts:
tests/ref/fate/filter-hqdn3d
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1a6d4bd7b60761bd7d955011ce7df4dd6b87b497':
FATE: add a test for the fade filter
FATE: add a test for the drawbox filter
FATE: add a test for the boxblur filter
FATE: add a test for the gradfun filter
Conflicts:
tests/fate/filter.mak
tests/ref/fate/filter-gradfun
our gradfun test is renamed to gradfun-ubitux as its name conflicts and
it was requested to be kept. Feel free to rename, change, finetune ...
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The partial frames leak a few uninitialized pixels through
due to incomplete interlaced error concealment support.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2eba9087f3031c6050f8dcd996225490be6c2410':
lavc: make up a fake frame channel layout when there is no real one.
Conflicts:
libavcodec/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '813b82b927b19532e3bc3397b972c8a27b9f6326':
configure: Fix silly typo in logging command of check_struct()
fate: remove last incomplete frame from mpeg2-field-enc test
Conflicts:
tests/fate/video.mak
tests/ref/fate/mpeg2-field-enc
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
lavf: Add a fate test for the noproxy pattern matching
lavf: Handle the environment variable no_proxy more properly
Conflicts:
libavformat/Makefile
libavformat/internal.h
libavformat/tls.c
libavformat/utils.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The new code is also faster and more robust.
As for the performance:
old decoder + conversion to rgb: fps = 2618
old decoder, without converting to rgb: fps = 4012
new decoder, producing rgb: fps = 4502
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Matroska specification lists support for BlockAdditional element
which is not supported by ffmpeg's matroska parser. This patch
adds grammar definitions for parsing that element (and few other
related elements) and then puts the data in AVPacket.side_data
with new AVPacketSideDataType AV_PKT_DATA_MATROSKA_BLOCKADDITIONAL.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This replaces a large number of checks for the second field by
fixing the pointers when they are setup
This should also fix I/BI field pictures
Changes checksums for vc1_sa10143, the file becomes slightly closer
to what the reference decoder outputs
Based on "vc1dec: the second field is written wrong to the picture"
by Sebastian Sandberg <sebastiand.sandberg@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'dff6197dfb9b2d145729885c63f865c5fdd184aa':
nuv: do not rely on get_buffer() initializing the frame.
yop: initialize palette to 0
Conflicts:
libavcodec/nuv.c
tests/ref/fate/nuv-rtjpeg-fh
tests/ref/fate/yop
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2cd4068071b9a8908823a3107f97e938211045ce':
fraps: fix off-by one bug for version 1.
Conflicts:
libavcodec/fraps.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '238614de679a71970c20d7c3fee08a322967ec40':
cdgraphics: do not rely on get_buffer() initializing the frame.
svq1: replace struct svq1_frame_size with an array.
vf_yadif: silence a warning.
Conflicts:
libavcodec/svq1dec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The FATE sample contains some pixels with value 0, but the palette
stored in the file contains only values from 16 up. Because the default
and cmdutils get_buffer() initialize the data to 0x80, they appear as
gray dots.
After this commit they change to black dots, which is probably still
incorrect but less visible and doesn't rely on get_buffer() initializing
the data.
* commit '8a4f26206d7914eaf2903954ce97cb7686933382':
dsputil: remove butterflies_float_interleave.
srtp: Move a variable to a local scope
srtp: Add tests for the crypto suite with 32/80 bit HMAC
Conflicts:
libavcodec/x86/dsputil.asm
libavcodec/x86/dsputil_mmx.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '0eecafc948b74c247ebbc59f18f508db5d590d0b':
configure: Make the new srtp protocol depend on the rtp protocol
lavf: Add a fate test for the SRTP functions
lavu: Add a fate test for the HMAC API
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'abae27ed3acd0a7c54f11760c5be2d2653c4edf8':
rtpdec: Fix the calculation of expected number of packets
fate: vp3: Fix fate-vp3-coeff-level64 test dependencies
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ec86ba57312745fd7ad9771e3121e79c6aacba30':
vp3: Fix double free in vp3_decode_end()
fate: Split fate-siff test into demuxer and VB video decoder test
Conflicts:
tests/fate/demux.mak
tests/fate/video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Add some additional checks for EOF and print error messages on an incomplete
header or packet.
FATE reference updated for id-cin-video due to the demuxer no longer
returning a partial video packet at EOF.
The data does not contain timing or trailing line breaks anymore. In
addition to being less idiotic, it is consistent with other codecs and
thus allows more switches between formats and codecs. It also fixes the
issue of the trailing line returns being simple \n instead of CRLF in
the ASS rectangle dialogue (this is the reason of the FATE update).
* commit '5e6ee38bd3cef0dd05f1dd7977c71f3479eb6d01':
FATE: add cavs test
cavsdec: export picture type in the output frame
Conflicts:
tests/fate/video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Current MicroDVD AVPackets contain timing information and trailing line
breaks. The data is now only composed of the markup data. Doing this
consistently between text subtitles decoders allows to use different
codec for various formats. For instance, MicroDVD markup is sometimes
found in some VPlayer files. Also, generally speaking, the subtitles
text decoders have no use of these timings (and they must not use them
since it would break any user timing adjustment).
Technically, this is a major ABI break. In practice, a mismatching
lavf/lavc will now error out for MicroDVD decoding. Supporting both
formats requires unnecessary complex and fragile code.
FATE needs update because line breaks in the ASS file were "\n" (because
that's what is used in the original file). ASS format expect "\r\n" line
breaks; this commit fixes this issue. Also note that this "\r\n"
trailing need to be moved at some point from the decoders to the ASS
muxer.
Note that the linebreaks text codec option (but not the feature) has
been removed; its main goal was to allow demuxers to configure the text
decoder (and not meant to be used by users), but the AVOption are not a
viable solution. This is solved differently in this commit.
The SRT muxer is reponsible for separating events with two line breaks,
there is no need to add more than necessary. Similarly, other muxers
(such as Matroska) are not supposed to add line breaks at the end of the
payload.
Do not overwrite linesize set by get_buffer().
The last frame in the FATE test is not decoded anymore, since the file
is cut and a part of it is missing.
The initial testing of the VFW binary codec was flawed,
likely due to an AviSynth bug.
Re-testing using VirtualDub and various professional editing
applications has revealed it should have been flipped.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit '9d5c62ba5b586c80af508b5914934b1c439f6652':
lavu/opt: do not filter out the initial sign character except for flags
eval: treat dB as decibels instead of decibytes
float_dsp: add vector_dmul_scalar() to multiply a vector of doubles
Conflicts:
libavutil/eval.c
tests/ref/fate/eval
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e816034a5fa131b13c4ad87bb0b5065b4f5697c6':
fate-seek: remove use of gnu make 3.82 only private modifier
fate: move vsynth reference files to their own directory
fate: move fate-acodec reference files to their own dir
configure: avplay now depends on avresample
fate: split dependencies for fate-seek tests
Conflicts:
configure
tests/fate/seek.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The new code reads the input frame when its ready, the previous
code did read the input frame during start_frame at which point it
may not yet be available.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes correctly storing and identifying PCM in nut.
Based on patch by Luca Barbato
Found-by: durandal_1707
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
FATE: add a bink version 'b' test
FATE: add a bink version 'i' test
libswscale: remove unnecessary direct #if LIBSWSCALE_VERSION_MAJOR
Conflicts:
tests/fate/video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
