If it fails, the buffers can be (partially) uninitialized.
This fixes 'Conditional jump or move depends on uninitialised value(s)'
valgrind warnings.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Prevents read of uninitialized variable
Based on patch by: Andreas Cadhalpun <andreas.cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Previous version Reviewed-by: tim nicholson <nichot20@yahoo.com>
Previous version Reviewed-by: Tomas Härdin <tomas.hardin@codemill.se>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is the 1st patch in preparation for using WebPAnimEncoder API for encoding
and muxing WebP images.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Since the underlying URLContext read functions are used,
they handle interruption, without having to handle it at
this level.
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids hijacking the fd, by reading using the normal
URLContext functions instead. This allowing reading data that has
been buffered in the underlying URLContext.
This avoids using the libraries own send functions that can
cause SIGPIPE.
The fd is still used for polling the lowlevel socket, for
waiting for retries.
Signed-off-by: Martin Storsjö <martin@martin.st>
These loops can take a lot of time if count is very large.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This can unnecessarily waste a lot of time.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
nut->last_syncpoint_pos doesn't necessarily change between resync
attempts, so find_any_startcode can return the same startcode again.
Thus remember where the last resync happened and don't try to resync
before that.
This can't be done locally in nut_read_packet, because this wouldn't
prevent infinite resync loops, where after the resync a packet is
returned and while reading a following packet the resync happens again.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Added in 361702660d. Modified version that
doesn't use this label merged in 55231323b0,
thus obsoleting this label.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes a memleak if read_kuki_chunk is executed more than once.
Reviewed-by: Carl Eugen Hoyos <cehoyos@ag.or.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
If avio_read fails, the buffer can contain uninitialized values.
Reviewed-by: Carl Eugen Hoyos <cehoyos@ag.or.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Since len is an unsigned int, the comparison is currently treated as
unsigned and thus ignores all errors from avio_read.
Thus cast len to int, which is unproblematic, because at that point len
is between 0 and 4.
This fixes 'Conditional jump or move depends on uninitialised value'
valgrind warnings in is_tag.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b8d2630c5327d2818d05c8a48be0417905d8e0fd':
dashenc: Reduce the segment duration if cutting out parts with edit lists
Merged-by: Michael Niedermayer <michaelni@gmx.at>
id should be an integer, not a string. It is also optional, so use
contentType instead which is the proper attribute for these values.
This addresses ticket #4545, fixing an MPD validation error.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '254f3daba4271c1918d9a7ad155b1442ef93ed29':
nut: Make sure to clean up on read_header failure
Conflicts:
libavformat/nutdec.c
See: 361702660d
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This makes sure that the time + duration of the first segment
matches the start time of the next segment for e.g. AAC audio
with encoder delay.
Signed-off-by: Martin Storsjö <martin@martin.st>
id should be an integer, not a string. It is also optional, so use
contentType instead which is the proper attribute for these values.
This fixes an MPD validation error.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
This currently works for most users because
avformat_open_input sets it, but this patch fixes any
applications not using that function.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
APIC tags always have a description. Tag writers obviously leave it
empty if there is no description. In this case, libavformat would export
"" as title. Do not set the title instead.
APIC tags always have a description. Tag writers obviously leave it
empty if there is no description. In this case, libavformat would export
"" as title. Do not set the title instead.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7b734ee55dbb8476d7ad63c7daf55c534cf82d5d':
lavf: Open PICT images with Quickdraw
Conflicts:
tests/fate/image.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
If max in clean_index is set to a negative ast->sample_size, the
following loop never ends:
while (max < 1024)
max += max;
Thus set ast->sample_size to 0 if it would otherwise be negative.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
If bit_rate is negative, it can trigger an av_assert2 in av_rescale_rnd.
Since av_rescale returns int64_t, but st->codec_bit_rate is int, it can
also overflow into a negative value.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes a segmentation fault.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
index_scale is set to matroska->time_scale of type uint64_t.
When index_scale is int, the assignment can overflow and e.g. result
in index_scale = 0. This causes a floating point exception due to the
division by index_scale.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fix a duplicate memory allocation. priv_data should be allocated
in line 64 call to avformat_alloc_output_context2 since we pass
the correct AVFormat to it. This removes the duplicate allocation.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Use dyn_duf to write chunks so that we create the actual chunk
file only after the entire chunk data is available. This will help
not confuse other software looking at the chunk file (e.g. a web
server) by seeing a zero length file when ffmpeg is writing into
it.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes Detecting AAC with such descriptor if the parts needed for detection
are later in the stream
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '82de8d71118f4eafd6a43e9ea9169bd411793798':
mpegts: Update the PSI/SI table only if the version change
Conflicts:
libavformat/mpegts.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The existing check has two problems:
1) i + count can overflow, so that the check '< 256' returns true.
2) In the (i == 'N') case occurs a j-- so that the loop runs once more.
This can trigger the assertion 'nut->header_len[0] == 0' or cause
segmentation faults or infinite hangs.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
If a PAT is finished while a PMT section filter is opened but
not yet finished, the PMT section filter is closed and all
the received data is discarded.
This is usually not an issue but some multiplexers (With very
quick PAT/PMT repetition settings) consistently emit a PMT
section start, then a PAT, and then the rest of the PMT,
causing the aforementioned behavior to result in no PMT being
finished.
In the most pathologic situation the stream information are lost
and the probe fallback miscategorizes subtitles as mp3 audio.
Avoid the issue through eliminating redundant PSI/SI table
updates by checking their version field, which is required by
the standard to be incremented on every change no matter how
minor.
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
A negative frame rate triggers an av_assert2 in av_rescale_rnd.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Check extended sync word for 16-bit LE and BE core streams to reduce
probability of alias sync detection. Previously sync word extension was
checked only for 14-bit streams.
This follows up the similar change in avcodec/dca_parser.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Remove the direct profile from UTCTiming element. Per DASH spec,
direct profile value should be the time at which the request was
made to the server and not the time at which the manifest was
written. So ffmpeg cannot write this value. This patch removes
the direct profile and write the UTCTiming element with the http
profile only if a URL is passed as a parameter. Update the fate
test to reflect this change.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fix a bug where the chunk muxer doesn't write the very first audio
packet (with pts == 0).
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b90adb0aba073f9c1b4abca852119947393ced4c':
rtsp: Make sure we don't write too many transport entries into a fixed-size array
Merged-by: Michael Niedermayer <michaelni@gmx.at>
If the file size is much larger than what is indicated in the XING
header, the demuxer assumes it's a concatenated file, and throws away
the (presumably) incorrect duration information. Unfortunately, this
also triggers if the id3 tags are very large (embedded pictures and
such). Then the half-baked heuristic not only breaks the duration
display, but also gapless audio.
Fix it by subtracting the size of the headers (the check is off by some
bytes, but that doesn't matter at all). Note that there could be an
arbitrary amount of tags _after_ the mp3 data, but hopefully these are
not too large to trigger the heuristic in practice.
Also add a warning when this happens.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
While I'm not sure why exactly sure why the old code could end up in the
wrong position, using the generic index code is much simpler and is
known to work correctly.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes the calculation of the number of needed blocks to make
sure that ALL pixels are represented by the result.
Signed-off-by: Martin Storsjö <martin@martin.st>
This removes the error logging added in 4e54432164.
This avoids warnings about "Invalid interval start specification 'now'"
for live rtsp streams.
We only try to parse some of the many valid values for time ranges
in RTSP - the other ones are fully valid but not interesting for the
use case in rtsp.c, so we shouldn't warn about them.
(Parsing the time ranges is needed to allow seeking, but e.g. setting
the current realtime clock for the start time doesn't make sense.
av_parse_time has got a different mode for parsing absolute times
as well, which can handle the special case "now", but that doesn't
make much sense for this particular use in rtsp.c.)
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes a NULL pointer dereference if vst->duration is 0.
The problem was introduced in commit 0588acaf.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
It's the most useful mode, because it seeks accurately, and does not
break features like gapless audio.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
"-usetoc 2" now invokes the generic seek and indexing mode. This mode
skips data until the seek target is reached, and this is exact. It also
makes gapless audio actually work if a seek past the start of the file
is involved.
Change the fate-gapless-mp3 test to use the new mode, and move the old
one to fate-gapless-mp3-toc (since the test forces use of the Xing TOC).
The new mode has a different result for the seek - this result is
actually correct.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The mp2 seek test results change. Whether to skip samples if the file
had no LAME gapless tags was inconsistent. When seeking to the start
of the file, 529 samples were skipped, but when playing from start,
nothing was skipped. This commit changes the behavior on seek to skip
nothing.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Some players do not support setting minimumUpdatePeriod to zero.
This patch adds a new parameter that will let the users set any
value to this field. Also updates the test and the documentation.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
DASH spec requires the presence of either duration of the period
or the minimumUpdatePeriod element. This patch adds the
minimumUpdatePeriod element hardcoded with the value 0 as the
manifest will never be updated for WebM DASH Live streams. Also
updating the fate test reference file.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Using the PRIu8 format specifier to print an enum value causes a
compiler warning, so use %d instead.
Fixes ticket #4467.
Signed-off-by: Chris Watkins <watk@chromium.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
With this the returned timestamp should match the packet instead of
the requested timestamp, which may lay between packets
Reviewed-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd34039b171bebe37bf723a1b03e5651267099739':
rmenc: Drop the temporary buffer for ac3 byteswap
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2cc3936599b6fc63143036659653d1be0624360f':
dashenc: Add a publishTime field in dynamic manifests
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9286de045968ad456d4e752651eec22de5e89060':
mov: Double-check that alias path is not an absolute path
Conflicts:
libavformat/mov.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
nlvl_to and nlvl_from can be set to 1 if both alias and target files
are in the same directory, so actually check the first character of the
string. We can do this because MacOS filepaths (alis type 2) are always
converted to UNIX filepaths (alis type 18).
Absolute paths can be stored in alis type 2 and 18 according to my research:
the first is the canonical MacOS filepath, with path level separated by
colons, and the volume name within the filepath, while the second should be the
absolute filesystem path from the mount point.
This avoids waiting for a count to increase which will always be 0 and may
reduce the startup delay for affected streams (rare)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Apparently, some live streams can delete segments too early, maybe
because the client is too far behind. In this case, it's better to skip
the segment, instead of returning EOF. (Yes, the HLS demuxer actually
returns AVERROR_EOF if opening the segment returns a 404 HTTP error.)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
