* qatar/master:
mss1: fix decoding masked regions in interframes
mxfdec: fix off by one error.
mxfdec: only parse next partition pack if parsing forward
mxfdec: let pkt->pts = mxf->current_edit_unit if intra-only
mxfdec: fix frame height vs field height confusion
mxfdec: Add intra_only flag to MXFTrack
mxfdec: fix Avid AirSpeed files being misinterpreted as OP1a
mxfdec: truncate packets that extend past the next edit unit
mxfdec: set pixel format for cdci picture formats
mxfdec: detect uncomp pictures using essence container ul
mxfdec: set track edit rate num/den in expected order
x86/cpu: implement get/set_eflags using intrinsics
x86/cpu: implement support for cpuid through intrinsics
x86/cpu: implement support for xgetbv through intrinsics
lavu: use intrinsics for emms on systems lacking inline asm support
mem: Don't abort on av_malloc(0) in debug mode
Conflicts:
configure
libavformat/mxf.h
libavformat/mxfdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
We cannot do this in general since we could be reading
a file with B-frames while lacking an index.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This allows future assumptions to be made without affecting non-intra files.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The "ECs != 1 -> OP1a" assumption was wrong. Luckily, the file
that triggered that behavior had two ECs, not zero. Hence
distinguishing between them is simple in this case.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This fixes rare cases where OPAtom may be treated
as OP1a, causing all essence to be read into RAM.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The properties of the CDCI Descriptor are insufficient to specify
the pixel format for uncompressed picture data. SMPTE 377-1 and
RP224v10 have defined a set of picture coding labels to indicate what
formatting was used.
This patch uses 2 labels to detect UYVY422 or YUYV422 pixel formats.
It defaults to UYVY422 for 8-bit 4:2:2 pictures to support files
that were created before the coding labels were introduced ~2008
The codec pix_fmt default was changed from 0 (PIX_FMT_YUV420P) to
-1 (PIX_FMT_NONE)
Reviewed-by: Baptiste Coudurier <baptiste.coudurier@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This supports detection of uncompressed picture in files that
didn't include a Picture Coding Label. The lables weren't
available until SMPTE 377-1 and RP224v10
Reviewed-by: Baptiste Coudurier <baptiste.coudurier@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This matches the order used for the index table edit rate.
Reviewed-by: Baptiste Coudurier <baptiste.coudurier@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* qatar/master:
mxfdec: replace x>>av_log2(sizeof(..)) by x/sizeof(..).
x86: h264_intrapred: Don't add the 'd' suffix to the SPLATB_REG macro
Conflicts:
libavformat/mxfdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Also replace x>>av_log2(sizeof(..)) + 1 by x/sizeof(..). The +1 is
probably meant to emulate av_log2_ceil(sizeof(..)) in cases where ".."
is not a power of two.
The reason for this is that such files have IndexTableSegments which when parsed
cover EditUnit ranges like this:
[0,1)
[249,250)
[249,377)
[0,249)
where each interval is [IndexStartPosition,IndexStartPosition+IndexDuration).
This would be reduced to a sparse index like:
[0,1), [249,250)
instead of the full range:
[0,249), [249,377)
See TimeCode_HD.mxf, UMID =
060a2b340101010101010410130000000004001aa0e59175025b2a5600da4101.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
We can't do this in general since we could be reading a file with B-frames while
lacking an index.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The "ECs != 1 -> OP1a" assumption was wrong. Luckily, the file that triggered
that behavior had two ECs, not zero. Hence distinguishing between them is
simple in this case.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes rare cases where OPAtom may be treated as OP1a, causing all essence
to be read into RAM.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The properties of the CDCI Descriptor are insufficient to specify
the pixel format for uncompressed picture data. SMPTE 377-1 and
RP224v10 have defined a set of picture coding labels to indicate what
formatting was used.
This patch uses 2 labels to detect UYVY422 or YUYV422 pixel formats.
It defaults to UYVY422 for 8-bit 4:2:2 pictures to support files
that were created before the coding labels were introduced ~2008
The codec pix_fmt default was changed from 0 (PIX_FMT_YUV420P) to
-1 (PIX_FMT_NONE)
Reviewed-by: Baptiste Coudurier <baptiste.coudurier@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This supports detection of uncompressed picture in files that
didn't include a Picture Coding Label. The lables weren't
available until SMPTE 377-1 and RP224v10
Reviewed-by: Baptiste Coudurier <baptiste.coudurier@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This matches the order used for the index table edit rate.
Reviewed-by: Baptiste Coudurier <baptiste.coudurier@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (26 commits)
eac3dec: replace undefined 1<<31 with INT32_MIN in noise generation
yadif: specify array size outside DECLARE_ALIGNED
prores: specify array size outside DECLARE_ALIGNED brackets.
WavPack demuxer: set packet duration
tta: use skip_bits_long()
mxfdec: Ignore the last entry in Avid's index table segments
mxfdec: Sanity-check SampleRate
mxfdec: Handle small EditUnitByteCount
mxfdec: Consider OPAtom files that do not have exactly one EC to be OP1a
mxfdec: Don't crash in mxf_packet_timestamps() if current_edit_unit overflows
mxfdec: Zero nb_ptses in mxf_compute_ptses_fake_index()
mxfdec: Sanity check PreviousPartition
mxfdec: Never seek back in local sets and KLVs
mxfdec: Move the current_partition check inside mxf_read_header()
mxfdec: Fix infinite loop in mxf_packet_timestamps()
mxfdec: Check eof_reached in mxf_read_local_tags()
mxfdec: Check for NULL component
mxfdec: Make sure mxf->nb_index_tables > 0 in mxf_packet_timestamps()
mxfdec: Make sure x < index_table->nb_ptses
build: Add missing directories to DIRS declarations.
...
Conflicts:
doc/build_system.txt
doc/fate.texi
libavfilter/x86/yadif_template.c
libavformat/mxfdec.c
libavutil/Makefile
tests/fate/audio.mak
tests/fate/prores.mak
tests/fate/screen.mak
tests/fate/video.mak
tests/ref/fate/bethsoft-vid
tests/ref/fate/cscd
tests/ref/fate/dfa4
tests/ref/fate/nuv
tests/ref/fate/vp8-sign-bias
tests/ref/fate/wmv8-drm
tests/ref/lavf/gxf
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The last entry is the total size of the essence container.
Previously a TemporalOffset error would be logged, even though
segments like these are expected.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
These are common with audio atoms. Without this the demuxer would read two
bytes at a time for a mono 16-bit file.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Specially crafted files can lead the parsing code to take too long.
We fix a lot of these problems by not allowing local tags to extend
past the end of the set and not allowing other KLVs to be read past
the end of themselves.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
This can happen if an index table segment has a very large IndexStartPosition.
zzuf3.mxf is an example of such a file.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Only the OPAtom demuxing logic is guaranteed to have index tables,
meaning OP1a files that lack an index would cause SIGSEGV.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
* qatar/master:
smacker: Sanity check huffman tables found in the headers.
smacker: remove dead store
qdm2: Check data block size for bytes to bits overflow.
mxfdec: Fix files with essence containers larger than 2 GiB.
mxfdec: Employ correct printf conversion specifiers for POSIX int types.
vc1: always read the bfraction element for interlaced fields
fate: add XWD image regression test
lavf: prevent infinite loops while flushing in avformat_find_stream_info
matroskadec: Pad AAC extradata.
ismindex: Fix build on mingw
Conflicts:
libavformat/mxfdec.c
libavformat/utils.c
tests/lavf-regression.sh
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (25 commits)
riff: fix invalid av_freep() calls on EOF in ff_read_riff_info
pam: Fix a typo that broke writing and reading PAM files.
mxfdec: fix memleak on av_realloc failures
mxfdec: Do not parse slices or DeltaEntryArrays.
mxfdec: hybrid demuxing/seeking solution
mxfdec: Add Avid's essence element key.
mfxdec: Separate mxf_essence_container_uls for audio and video.
mxfdec: Compute packet offsets properly.
mxfdec: Use MaterialPackage - Track - TrackID instead of the system_item hack.
mxfdec: use av_dlog() for 'no corresponding source package found'
mxfdec: Make mxf->partitions sorted by offset.
mxfdec: parse ThisPartition
mxfdec: Speed up metadata and index parsing.
mxfdec: Make sure DataDefinition is consistent between material track and source track.
mxfdec: add EssenceContainer UL found in 0001GL00.MXF.A1.mxf_opatom.mxf
mxfdec: Add hack that adjusts the n_delta calculation when system items are present.
mxfdec: Parse IndexTableSegments and convert them into AVIndexEntry arrays.
mxfdec: Move FooterPartition to MXFContext and make sure it is never zero.
mxfdec: check return value of avio_seek
mxfdec: skip to end of structural sets
...
Conflicts:
configure
libavcodec/pnm.c
libavformat/mxfdec.c
libavformat/riff.c
libavformat/rtsp.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This uses the old demuxing code for OP1a and separate demuxing code for OPAtom.
Timestamp output is added to the old demuxing code.
The seeking code is made to seek to the start of the desired EditUnit only,
from which the normal demuxing code takes over (if OP1a). This means we
do not use delta entries or slices, only StreamOffsets. OPAtom seeking
basically works like before.
This also makes D-10 seeking behave the same way as OP1a and OPAtom. In other
words, we allow seeking before the start or past the end for D-10 too.
Based on several patches by Tomas Härdin <tomas.hardin@codemill.se> and
Reimar Döffinger <Reimar.Doeffinger@gmx.de>.
Changed av_calloc to av_mallocz, added overflow checks.
It is a really bad idea to assign a video codec id
when we have set codec_type to audio and vice versa.
Prevents detection of mp2 in mxf as mpeg2video.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Specifically, this means parsing as before until we run into essence.
At that point we seek to the footer and parse until EOF. After that we start
seeking backward to the previous partition and parse that until we run into
essence or the next partition. This procedure is repeated until we encounter
the last partition we parsed in the forward direction.
The end result of all this is that large essence containers are not needlessly
parsed. This speeds up parsing large files a lot.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
This fixes 0001GL.MXF.V1.mxf_opatom.mxf and 0001GL00.MXF.A1.mxf_opatom.mxf
getting two streams each due to both using the same SourcePackageID.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Based on patch from Tomas Härdin <tomas.hardin@codemill.se>
and work by Georg Lippitsch <georg.lippitsch@gmx.at>
Changed av_calloc to av_mallocz and added overflow checks.
This fixes reading of partition packs. The code stops reading after the
operational pattern and should skip the array of essence container
labels that follow.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
* qatar/master:
fate: split ADPCM and DPCM test references into separate files.
mov, mxfdec: Employ more meaningful return values.
lavc: Relax API strictness in avcodec_decode_audio3 with a custom get_buffer()
wavpack: fix clipping for 32-bit lossy mode
vb: Use bytestream2 functions
Conflicts:
libavcodec/utils.c
libavcodec/vb.c
libavformat/mxfdec.c
tests/fate/dpcm.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Specially crafted files can lead the parsing code to take too long.
We fix a lot of these problems by not allowing local tags to extend past the
end of the set and not allowing other KLVs to be read past the end of
themselves.
The last entry is the total size of the essence container.
Previously a TemporalOffset error would be logged, even though segments like
these are expected.
This uses the old demuxing code for OP1a and separate demuxing code for OPAtom.
Timestamp output is added to the old demuxing code.
The seeking code is made to seek to the start of the desired EditUnit only,
from which the normal demuxing code takes over (if OP1a). This means we don't
use delta entries or slices, only StreamOffsets.
OPAtom seeking basically works like before.
This also makes D-10 seeking behave the same way as OP1a and OPAtom. In other
words, we allow seeking before the start or past the end for D-10 too.
This fixes ticket #746.
This changes mxf_compute_ptses() to be used for MXFIndexTable, and also adds
code for computing the fake index to it.
This also temporarily disables PTS computation. A future patch will restore it.
