cache, since this can already be accessed through ff_rm_retrieve_cache().
See "[PATCH] rmdec.c: remove cache access duplication" thread.
Originally committed as revision 18009 to svn://svn.ffmpeg.org/ffmpeg/trunk
in common except for this one value. Change was requested by Luca in the
"[FFmpeg-devel] RTP mark bit not passed to parse_packet" thread.
Originally committed as revision 17615 to svn://svn.ffmpeg.org/ffmpeg/trunk
to the parse_packet() function pointer in RTPDynamicProtocolHandlers. This
allows these functions to peek back and retrieve values from the demuxer's
context (or RTSPState). The ASF/RTP payload parser will use this to be able
to parse SDP values (which occur even before the payload ID is given), store
them in the RTSPState and then retrieve them while parsing payload data. See
"[PATCH] RTSP-MS 13/15: add RTSP demuxer AVFormatContext to parse_packet()
function pointer (was: transport context)" mailinglist thread.
Originally committed as revision 17015 to svn://svn.ffmpeg.org/ffmpeg/trunk
Otherwise doxygen complains about ambiguous filenames when files exist
under the same name in different subdirectories.
Originally committed as revision 16912 to svn://svn.ffmpeg.org/ffmpeg/trunk
streams" (a single RTSPStream / RDTDemuxContext can represent several
AVStreams, that's just how Real/RDT was designed...). This will fill in
most of the AVStream/AVCodecContext header fields, similar to reading a
RM file header would. See "[PATCH] multi-stream MDPR parsing" thread on
mailinglist.
Originally committed as revision 16468 to svn://svn.ffmpeg.org/ffmpeg/trunk
the AVStream->AVCodecContext->bit_rate field, which is not in the MDPR block
(the "OpaqueData" SDP field). This allows clients to choose streams based
on their bitrate, which is what most network-players base stream selection
on. (Of course, it is also possible to select based on anything else, that
is entirely up to the client.) See "[PATCH] rdt.c: ASM rulebook bitrate
reading" thread on mailinglist.
Originally committed as revision 16467 to svn://svn.ffmpeg.org/ffmpeg/trunk
each "rule" described in the ASMRuleBook. Each rule represents a stream
of identical content compared to other streams in the same rulebook, but
with a possibly different codec/bitrate/etc. See "[PATCH] rdt.c: ASM
rulebook parsing and AVStream creation" thread on mailinglist.
Originally committed as revision 16466 to svn://svn.ffmpeg.org/ffmpeg/trunk
"rmdec.c: double free" discussion on mailinglist, patch with suggestions
from Reimar Doffinger.
Originally committed as revision 16378 to svn://svn.ffmpeg.org/ffmpeg/trunk
member of the array is ever used (compare to RMDemuxContext->audio_pkt_cnt).
See "[PATCH] oops I broke rdt.c" mailinglist thread.
Originally committed as revision 16367 to svn://svn.ffmpeg.org/ffmpeg/trunk
AVStreams can be used to call these public rmdec.c functions as well, as is
the case for RDT/RTSP streams. See mailinglist discussion in "[PATCH] rdt.c:
don't reuse the same AVStream in both RTSP and RM demuxer" thread.
Originally committed as revision 16366 to svn://svn.ffmpeg.org/ffmpeg/trunk
ff_rm_parse_packet() to indicate whether more audio packets are available
in the demuxer from the last RM frame, and save that in the RDT parsing
context. See patch/discussion in "[PATCH] rdt.c: don't access RMContext"
on ML.
Originally committed as revision 16110 to svn://svn.ffmpeg.org/ffmpeg/trunk
This function is called in rtsp.c for each a= line in the SDP of the Describe
response after m= RTSP stream descriptors. The function prototype used to
take an AVStream argument. For RDT, however, every RTSPStream represents
a set of streams of identical content, and can thus represent multiple
AVStreams. Therefore, it should not take an AVStream as argument. This
patch modifies it to accept a AVFormatContext (of the RTSP/SDP demuxer)
instead. See discussion in "[PATCH/RFC] change function prototype of
parse_sdp_a_line" thread on ML.
Originally committed as revision 16024 to svn://svn.ffmpeg.org/ffmpeg/trunk
patches adding stream-selection easier in code. See discussion in ML thread
"[PATCH] RDT/Realmedia patches #2".
Originally committed as revision 15964 to svn://svn.ffmpeg.org/ffmpeg/trunk
stream itself, plus a name change to signify that there may be multiple
AVStreams per RDT set. See discussion in "[PATCH] RDT/Realmedia patches #2"
thread on ML.
Originally committed as revision 15962 to svn://svn.ffmpeg.org/ffmpeg/trunk
of 16bits. See discussion in "[PATCH] RDT/Realmedia patches #2" thread on ML.
Originally committed as revision 15864 to svn://svn.ffmpeg.org/ffmpeg/trunk
and streamID and the length. of the packet in case of packet concatenation.
Discussed in ML thread "[PATCH] RDT/Realmedia patches #2".
Originally committed as revision 15853 to svn://svn.ffmpeg.org/ffmpeg/trunk
accessing the data array. This allows to easily read optionally available
header bits without causing pains. See discussion in "[PATCH] RDT/Realmedia
patches #2" thread on ML.
Originally committed as revision 15852 to svn://svn.ffmpeg.org/ffmpeg/trunk
variables to temporary hold the values. Discussed in ML thread "[PATCH]
RDT/Realmedia patches #2".
Originally committed as revision 15851 to svn://svn.ffmpeg.org/ffmpeg/trunk
when calling, but url_close_buf() doesn't free it. The better solution
is to not allocate it at all, init it with init_put_byte() and then
not have to close it at all. In the case where we do need to hold it
around for longer than within the function context, we allocate it with
av_alloc_put_byte() and free it with av_free() instead. Discussed in ML
thread "[PATCH] fix small memleak in rdt.c".
Originally committed as revision 15850 to svn://svn.ffmpeg.org/ffmpeg/trunk
specify the data source as function argument instead of in s->pb before
calling the function. Discussed in ML thread "[PATCH] fix small memleak
in rdt.c".
Originally committed as revision 15849 to svn://svn.ffmpeg.org/ffmpeg/trunk
comment documentation in that function. See discussion on ML in the
"[PATCH] RDT/Realmedia patches #2" thread.
Originally committed as revision 15825 to svn://svn.ffmpeg.org/ffmpeg/trunk
RTPDemuxContext for RTP) for these streams where the transport protocol
is RDT (as served by Realmedia servers).
Originally committed as revision 15544 to svn://svn.ffmpeg.org/ffmpeg/trunk
not use RTPDemuxContext, but rather take a pointer to the payload context
directly. This allows using payload handlers regardless over the transport
over which they were sent, and prepares for the introduction of a future
RDTDemuxContext. See discussion in "RDT/Realmedia patches #2" thread on ML.
Originally committed as revision 15541 to svn://svn.ffmpeg.org/ffmpeg/trunk
the use of rdt_parse_packet(). See "RDT/Realmedia patches #2" thread on ML.
Originally committed as revision 15497 to svn://svn.ffmpeg.org/ffmpeg/trunk
rtsp.c to detect the ID of the packet source also in case of TCP streams.
This allows proper playback of RDT streams with multiple stream types, e.g.
audio + video. Accepted by LucaB in "RDT/Realmedia patches #2" thread on ML.
Originally committed as revision 15496 to svn://svn.ffmpeg.org/ffmpeg/trunk
DynamicProtocol* context. Doing so could lead to problems if we're accessing
Real servers serving non-RDT data (or the other way around). Temporarily,
this patch adds a _subscribe2() function which will soon be removed in one
of the subsequent commits. OK'ed by Luca in "Realmedia patch" thread on ML.
Originally committed as revision 15483 to svn://svn.ffmpeg.org/ffmpeg/trunk
playback of RTSP/RDT streams should work. See discussion in "Realmedia patch"
thread on ML.
Originally committed as revision 15237 to svn://svn.ffmpeg.org/ffmpeg/trunk
first stream in a RTSP/RDT session. See discussion in "Realmedia patch"
thread on ML.
Originally committed as revision 15235 to svn://svn.ffmpeg.org/ffmpeg/trunk
in rtpdec.c, so that they can be shared and used in the same way in rtsp.c.
The handlers, since they are specific for RDT, are registered in rdt.c and
a new registration function is thus called from allformats.c.
The dynamic payload handler also implements RDT-specific SDP-line parsing for
OpaqueData and StartTime, which are specific for RDT and needed for proper
playback. OpaqueData contains one or a list ("MLTI") of "MDPR" chunks that
can be parsed by the rmdec.c function ff_rm_read_mdpr_codecdata(). To use
this function, we create a new rdt_demuxer, which has the same private data
as the rm_demuxer. The resulting AVFormatContext created with _open_stream()
can thus be used to call functions in the RM demuxer.
See discussion in "Realmedia patch" thread on ML.
Originally committed as revision 15234 to svn://svn.ffmpeg.org/ffmpeg/trunk
of the "RealChallenge2" response, which is some sort of authentication. See
discussion in "Realmedia patch" thread on ffmpeg-devel.
Originally committed as revision 15170 to svn://svn.ffmpeg.org/ffmpeg/trunk
