Even if linking directly to getaddrinfo, use our version of
gai_strerror instead of the system's version. Microsoft explicitly
documents that their version of gai_strerror is thread-unsafe.
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids warnings if there already exists a definition.
This is the case on windows, where the getaddrinfo isn't available
and linked to (and we use our fallbacks instead, which actually
try to use the proper getaddrinfo version if found at runtime),
but gai_strerror still exists as a define.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is useful if a proper getaddrinfo is loaded dynamically on
windows, while using the fallback implementation of gai_strerror.
Signed-off-by: Martin Storsjö <martin@martin.st>
We cannot do this in general since we could be reading
a file with B-frames while lacking an index.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This allows future assumptions to be made without affecting non-intra files.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The "ECs != 1 -> OP1a" assumption was wrong. Luckily, the file
that triggered that behavior had two ECs, not zero. Hence
distinguishing between them is simple in this case.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This fixes rare cases where OPAtom may be treated
as OP1a, causing all essence to be read into RAM.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The properties of the CDCI Descriptor are insufficient to specify
the pixel format for uncompressed picture data. SMPTE 377-1 and
RP224v10 have defined a set of picture coding labels to indicate what
formatting was used.
This patch uses 2 labels to detect UYVY422 or YUYV422 pixel formats.
It defaults to UYVY422 for 8-bit 4:2:2 pictures to support files
that were created before the coding labels were introduced ~2008
The codec pix_fmt default was changed from 0 (PIX_FMT_YUV420P) to
-1 (PIX_FMT_NONE)
Reviewed-by: Baptiste Coudurier <baptiste.coudurier@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This supports detection of uncompressed picture in files that
didn't include a Picture Coding Label. The lables weren't
available until SMPTE 377-1 and RP224v10
Reviewed-by: Baptiste Coudurier <baptiste.coudurier@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This matches the order used for the index table edit rate.
Reviewed-by: Baptiste Coudurier <baptiste.coudurier@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Only return an error if memory allocation fails or error recognition is
set to explode. Otherwise just print an error message and continue
reading the file.
Also replace x>>av_log2(sizeof(..)) + 1 by x/sizeof(..). The +1 is
probably meant to emulate av_log2_ceil(sizeof(..)) in cases where ".."
is not a power of two.
This avoids creating new AVStreams for them when switching between
different variants of them, since we can handle changes between
different sample rates of nellymoser within the same stream.
Signed-off-by: Martin Storsjö <martin@martin.st>
Mingw headers provide similar defines already (unconditional #defines,
without any #undef or #ifdef around it), while MSVC doesn't have
them.
Signed-off-by: Martin Storsjö <martin@martin.st>
The fallback function is a non-static function, we shouldn't be
defining non-static functions outside of the proper ff/av prefix
namespaces.
This is especially important for a function like poll, which
other parties (other libraries, or executables linking these
libraries) also might provide similar but incompatible fallbacks for.
Signed-off-by: Martin Storsjö <martin@martin.st>
We need to include winsock2.h here, to make sure we have the
real pollfd struct definition, if one exists, before defining the
fallback poll function.
Signed-off-by: Martin Storsjö <martin@martin.st>
The fds are unsigned integers in the windows definition of struct
sockfds. Due to this, the comparison if (fds[i].fd > n) was always
false.
Signed-off-by: Martin Storsjö <martin@martin.st>
io.h is required for open and _wopen, and fcntl.h is required for
the O_CREAT flag. On mingw, fcntl.h is included by os_support.h (and
the mingw fcntl.h includes io.h), but include it explicitly here
since this implementation requires it.
Also move the #undef open up. open must not be defined to ff_win32_open
while including the headers that declare the open function. On mingw,
this happened in os_support.h before open was redirected.
Signed-off-by: Martin Storsjö <martin@martin.st>
It is included for the open/read/write/close functions. On
MSVC, where this header does not exist, the same functions
are provided by io.h, which is already included.
On windows, these functions are provided by io.h. Make sure
io.h is included if it exists, regardless of the setmode
function.
Signed-off-by: Martin Storsjö <martin@martin.st>
unistd.h used to be required for gethostname. On windows, gethostname
is provided by winsock2.h. Now network.h includes both unistd.h and
winsock2.h if they exist.
Signed-off-by: Martin Storsjö <martin@martin.st>
This gives you the proper v4 or v6 version of the "any address",
allowing receiving connections on any address on the machine.
Signed-off-by: Martin Storsjö <martin@martin.st>
Since the errno.h values don't match the error codes that winsock
returns, map the winsock error codes to the errno ones, to make
sure explicit checks against AVERROR(x) match.
Signed-off-by: Martin Storsjö <martin@martin.st>
Apparently this include is needed on some systems for building the
poll fallback (for the timeval struct for select?), but it isn't
available on all systems. Thus only include it if it exists.
Signed-off-by: Martin Storsjö <martin@martin.st>
This heaader is required for close() for sockets in network
code. For winsock, the equivalent function is defined in the
winsock2.h header.
This avoids having the HAVE_UNISTD_H in all files dealing with
raw sockets.
Signed-off-by: Martin Storsjö <martin@martin.st>
On MSVC, gmtime returns NULL for values outside of their supported
range (and these show up in our fate test). This doesn't seem
to affect the actual fate test result.
Signed-off-by: Martin Storsjö <martin@martin.st>
Currently if a pattern is given we look for up to the fifth file name in
the sequence. This option sets that limit to an arbitrary number.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This adds the capability to start counting file number from an arbitrary
integer.
This includes a few lines of trivial code from FFmpeg codebase.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Also use ff_neterrno() instead of errno directly (which doesn't work
on windows), for getting the error code.
Signed-off-by: Martin Storsjö <martin@martin.st>
getnameinfo doesn't set errno on failure, it returns an error code,
which should be handled by gai_strerror instead of the normal
strerror.
Signed-off-by: Martin Storsjö <martin@martin.st>
Rtmpt is effectively half duplex - the server can't return any
data unless we send a request (to which the server responds). If
we don't have any data to send currently, and the server didn't
return any data either, wait a little before doing the next request.
This avoids busy looping with idle posts with empty replies, while
waiting for more data from the server.
Signed-off-by: Martin Storsjö <martin@martin.st>
Add a new option 'rtmp_flush_interval' that allows specifying the
number of packets to write before sending it off as a HTTP request.
This is mostly relevant for RTMPT - for plain RTMP, it only controls
how often we check the socket for incoming packets, which shouldn't
affect the performance in any noticeable way.
Signed-off-by: Martin Storsjö <martin@martin.st>
This seems to be the correct mode to send, according to the
original RTSP RFC, and matches the method RECORD which is
sent later when starting to send data.
Darwin Streaming Server works fine with either of them.
Signed-off-by: Martin Storsjö <martin@martin.st>
This requires all NAL units to fit within single RTP packets. It
doesn't change the actual packetization for packets that fit, but
errors out and gives a helpful hint if the NAL units would have to
be split, and signals the right packetization mode in the SDP.
Signed-off-by: Martin Storsjö <martin@martin.st>
This adds two protocols, but one of them is an internal implementation
detail just used as an abstraction layer/generalization in the code. The
RTMPT protocol implementation uses rtmphttp:// as an alternative to the
tcp:// protocol. This allows moving most of the lower level logic out
from the higher level generic rtmp code.
Signed-off-by: Martin Storsjö <martin@martin.st>
This can happen if doing a new request using the same socket,
but the new request failed, which clears the urlcontext.
Signed-off-by: Martin Storsjö <martin@martin.st>
