This is done to disentangle ER from mpegvideo. In order to use a
classic Picture, callers can use ff_mpeg_set_erpic() or use a custom function
to set the fields. Please note that buffers need to be allocated before
calling ff_er_frame_end().
Fixes out of array read
Fixes: 1cb91c36c4e55463f14aacb9bdf55b38-asan_heap-oob_106cbce_5617_cov_11212800_h264_mmx_chroma_intra_lf.mp4
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
And use the value from the specification.
Sample-Id: 00000451-google
Found-by: Mateusz j00ru Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Fixes out of array read
Fixes: caa65cc01655505705129b677189f036-signal_sigsegv_fdcc43_2681_cov_3043376737_PPH422I5_Panasonic_A.264
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3a0576702825423abecb32627c530dbc4c0f73bc':
h264: store current_sps_id inside the current sps
Conflicts:
libavcodec/h264.c
libavcodec/h264_ps.c
The current_sps_id is not removed as it used in security related code.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '73e8fab31dc19c4371499e612856accbc00b2820':
h264: print values in case of error
Conflicts:
libavcodec/h264.c
libavcodec/h264_ps.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1f097d168d9cad473dd44010a337c1413a9cd198':
h264: reset data partitioning at the beginning of each decode call
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Prevents using GetBitContexts with data from previous calls.
Fixes access to freed memory.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC:libav-stable@libav.org
This avoids them being cleared before the full initialization finished
Fixes out of array read
Fixes: asan_heap-oob_f0c5e6_7071_cov_1605985132_mov_h264_aac__Demo_FlagOfOurFathers.mov
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Such changes are forbidden in H.264 and lead to race conditions
Fixes out of array read
Fixes: signal_sigsegv_f9796a_1613_cov_3114610371_FM1_BT_B.h264
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This handles macroblock edges for the chroma components in the same way
as for the luma compoment for 4:4:4 streams. The Spec explicitly states
that the deblocking filter is not applied to edges at the boundary of
the picture.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
* commit '00dbff4c3e048b4abd01bf805725aabff0fa5ee1':
h264: do not call field_end if we do not have a current picture
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Otherwise the ER code might try to use some already freed references.
Fixes possible access to freed memory.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC:libav-stable@libav.org
Higher modes are not allowed for 16x16/chroma, which is what this
function is used for. Otherwise this function would return 0 (vertical
prediction) for invalid higher modes, which could result in invalid
reads.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC:libav-stable@libav.org
In this case we may not have a current frame, while first_field being
set implies we do.
Fixes invalid reads.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC:libav-stable@libav.org
* commit '9eef9eb3014b2ed9c3ff4aac510a9f04edb555cf':
h264: check that execute_decode_slices() is not called too many times
Conflicts:
libavcodec/h264.c
The check is replaced by an assert() as the mb index should not ever go out
of bounds.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9a026c72982faf20e1c8dfbe48f0b312cdea69c8':
h264: rebuild the default ref list if the reference count changes
Conflicts:
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
There is no point in delaying the check and it avoids bugs with a
half-initialized context.
Fixes invalid reads.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC:libav-stable@libav.org
* commit '58312b2472d3a44d7458865c459d59ef2e02bf1a':
h264: reset data_partitioning if decoding the slice header for NAL_DPA fails
Merged-by: Michael Niedermayer <michaelni@gmx.at>
If it was set before then we can end up trying to decode a slice without
a valid slice header, which can lead to invalid memory access.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC:libav-stable@libav.org
This is a temporary workaround to allow deprecating
avcodec_get_frame_defaults(). The proper solution will be using a
properly allocated AVFrame in Picture.
* commit '5b10ef729f610fcbc9c485e7b643ce53268144cb':
h264: parse frame packing arrangement SEI messages and save relevant stereo3d information
Conflicts:
libavcodec/h264.c
libavcodec/h264_sei.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a553c6a347d3d28d7ee44c3df3d5c4ee780dba23':
lavc: use buf[0] instead of data[0] in checks whether a frame is allocated
Conflicts:
libavcodec/h264_refs.c
libavcodec/mpegvideo.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '458446acfa1441d283dacf9e6e545beb083b8bb0':
lavc: Edge emulation with dst/src linesize
Conflicts:
libavcodec/cavs.c
libavcodec/h264.c
libavcodec/hevc.c
libavcodec/mpegvideo_enc.c
libavcodec/mpegvideo_motion.c
libavcodec/rv34.c
libavcodec/svq3.c
libavcodec/vc1dec.c
libavcodec/videodsp.h
libavcodec/videodsp_template.c
libavcodec/vp3.c
libavcodec/vp8.c
libavcodec/wmv2.c
libavcodec/x86/videodsp.asm
libavcodec/x86/videodsp_init.c
Changes to the asm are not merged, they are left for volunteers or
in their absence for later.
The changes this merge introduces are reordering of the function
arguments
See: face578d56
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Allow supporting files for which the image stride is smaller than
the maximum block size + number of subpel mc taps, e.g. a 64x64 VP9
file or a 16x16 VP8 file with -fflags +emu_edge.
The not handling of frame gaps has lead to the lack of a dummy reference
frame, which has lead to the failure of decode_slice_header() which has
lead to one SEI recovery message being skiped which had introduced a
slightly suboptimal recovery point for at least 1 h264 file compared to
JM.
Found-by: Carl & BugMaster
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '28096e0a806e57376541e6222d315619906e3c55':
h264: wait for initial complete frame before outputing frames
Conflicts:
doc/APIchanges
libavcodec/h264.c
libavcodec/mpegvideo.h
libavutil/frame.h
libavutil/version.h
See: a64b028aeb (as well as various later commits)
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This can be optionally disabled whith the "output_corrupt" flags
option. When in "output_corrupt" mode, incomplete frames are
signalled through AVFrame.flags FRAME_FLAG_INCOMPLETE_FRAME.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* commit '4baba6c813b7a1f27370e20fb1a87b05fcb39208':
h264_parser: Fix POC parsing for the case where MMCO_RESET is present.
Conflicts:
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This ensures that all the non zero fields get setup correctly.
Alternatively their initialization could be duplicated.
Fixes Ticket2738
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This allows supporting files for which the image stride is smaller than
the max. block size + number of subpel mc taps, e.g. a 64x64 VP9 file
or a 16x16 VP8 file with -fflags +emu_edge.
* commit 'cab8c5f8e140c96ba3725ab709d823abfd1e31a5':
h264: do not reinitialize the global cabac tables at each slice header
See: 1e2e2c8095
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '71cabb521ac397db3903011d2de7afd3e0fc7ab6':
h264: do not discard NAL_SEI when skipping frames
Conflicts:
libavcodec/h264.c
See: 7d75fb381b
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c4e43560fe6677e9d60bfb3cffc41c7324e92a0b':
h264data: Move some tables to the only place they are used
Conflicts:
libavcodec/h264data.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This reverts commit bf36dc50ea, reversing
changes made to b7fc2693c7.
Conflicts:
libavcodec/h264.c
Keeping support for the old VDPAU API has been requested by our VDPAU maintainer
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This matches the matroska defintion of stereo_mode, with
no metadata written if no info exist in sei
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes inconsistency that leads to out of array accesses with threads
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes returning pictures with corrupted data pointers.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Just like get_buffer, get_format should not be called from a different
thread if thread_safe_callbacks is not set.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* commit '85deb51a01f1ecc5ac5faa52ad8ea141c384e23a':
h264: Only initialize dsputil if error resilience is enabled
Conflicts:
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e8cafd2773bc56455c8816593cbd9368f2d69a80':
h264: Clear the mb members via memset instead of using dsputil
Conflicts:
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
It is only used for error resilience. This allows building the
h264 decoder without dsputil, if error resilience is disabled.
Signed-off-by: Martin Storsjö <martin@martin.st>
The non-intra-pcm branch in hl_decode_mb (simple, 8bpp) goes from 700
to 672 cycles, and the complete loop of decode_mb_cabac and hl_decode_mb
(in the decode_slice loop) goes from 1759 to 1733 cycles on the clip
tested (cathedral), i.e. almost 30 cycles per mb faster.
Signed-off-by: Martin Storsjö <martin@martin.st>
The EC code does not support fields currently thus it makes no
sense to wait for these cases (which also the check doesnt handle
correctly)
Fixes Ticket 2454
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes inconsistency ultimately leading to an out of array read
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
hwaccel: fix use with frame based multithreading
Conflicts:
libavcodec/h263dec.c
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Allows use of AVHWAccel based decoders with frame based multithreading.
The decoders will be forced into an non-concurrent mode by delaying
ff_thread_finish_setup() calls after decoding of the current frame
is finished.
This wastes memory by unnecessarily using multiple threads and thus
copies of the decoder context but allows seamless switching between
hardware accelerated and frame threaded software decoding when the
hardware decoder does not support the stream.
* qatar/master:
h264: Make it possible to compile without error_resilience
Conflicts:
configure
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Error resilience is enabled by the h264 decoder, unless explicitly
disabled. --disable-everything --enable-decoder=h264 will produce
a h264 decoder with error resilience enabled, while
--disable-everything --enable-decoder=h264 --disable-error-resilience
will produce a h264 decoder with error resilience disabled.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '23e85be58fc64b2e804e68b0034a08a6d257e523':
h264: add a parameter to the CHROMA444 macro.
h264: add a parameter to the CHROMA422 macro.
Conflicts:
libavcodec/h264.c
libavcodec/h264.h
libavcodec/h264_cavlc.c
libavcodec/h264_loopfilter.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '6d2b6f21eb45ffbda1103c772060303648714832':
h264: add a parameter to the CABAC macro.
h264: add a parameter to the FIELD_OR_MBAFF_PICTURE macro.
Conflicts:
libavcodec/h264.c
libavcodec/h264_cabac.c
libavcodec/h264_cavlc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7fa00653a550c0d24b3951c0f9fed6350ecf5ce4':
h264: add a parameter to the FIELD_PICTURE macro.
h264: add a parameter to the FRAME_MBAFF macro.
Conflicts:
libavcodec/h264.c
libavcodec/h264_loopfilter.c
libavcodec/h264_refs.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'da6be8fcec16a94d8084bda8bb8a0a411a96bcf7':
h264: add a parameter to the MB_FIELD macro.
h264: add a parameter to the MB_MBAFF macro.
Conflicts:
libavcodec/h264.c
libavcodec/h264_cabac.c
libavcodec/h264_cavlc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
AVCodecContext.bits_per_raw_sample is updated from the previous thread
in the generic update function before the codec specific update_thread
function is called. The check for reinitialization of dsp functions uses
bits_per_raw_sample. When called from update_thread_context it will be
already at the current value and the dsp functions aren't updated if
only the bit depth changes.
* commit 'c3ebfcd6e1327ca7bbcaee822e593c2da6cfd352':
mpegvideo: allocate hwaccel privdata after the frame buffer
h264: allocate hwaccel privdata after the frame buffer
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This ensures the hwaccel privdata does not leak when a frame buffer could
not be allocated (and toggle the assert when the frame is re-used).
Having no frame buffer available is quite common when using the DXVA2
hwaccel in situations where the DXVA2 renderer is being re-allocated, for
example when moving between displays.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
dct_bits is never set except in h264, where it is never used, thus
remove it. Then, remove all functions that were set based on non-zero
(32) values for dct_bits. Lastly, merge 9-14 bpp functions for get_pixels
and draw_edge, which only care about pixel storage unit size, not actual
bits used (i.e. they don't clip).
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a4472ac01e86f9fae5adb9034f2777b86a9c5480':
Add informative messages to av_log_ask_for_sample calls lacking them
anm: Get rid of some very silly goto statements
Conflicts:
libavformat/anm.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '555000c7d5c1e13043a948ebc48d2939b0ba6536':
h264: check that DPB is allocated before accessing it in flush_dpb()
vf_hqdn3d: fix uninitialized variable use
vf_gradfun: fix uninitialized variable use
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7b89cd20d844cbe763ca34e63e99d110043cf241':
eamad: allocate a dummy reference frame when the real one is missing
Replace remaining includes of audioconvert.h with channel_layout.h
Replace some forgotten instances of PIX_FMT_* with AV_PIX_FMT_*.
Conflicts:
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'bcd0a7137e4aca0f6f598593b90ca8f338444c51':
configure: Add missing h264chroma dependencies to vp5, vp6
Add missing error_resilience includes to files that use ER
Conflicts:
configure
libavcodec/mpeg12.c
libavcodec/mpeg4videodec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This makes the decoder independent of mpegvideo.
This copy of the draw_horiz_band code is simplified compared to
the "generic" mpegvideo one which still has a number of special
cases for different codecs.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '5da51284937649a8ebb84fa951c235438fcbf8ae':
cavs: Add a dependency on h264chroma
lavc: Split out ff_hwaccel_pixfmt_list_420[] over individual codecs
Conflicts:
libavcodec/h263dec.c
libavcodec/h264.c
libavcodec/mpeg12.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c10da30d8426a1f681d99a780b6e311f7fb4e5c5':
shorten: set invalid channels count to 0
vorbisdec: check memory allocations
h264: check for luma and chroma bit dept being equal
Conflicts:
libavcodec/shorten.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Not all hwaccels implement all codecs, so using one single list for
multiple such codecs means some codecs will be represented in the list,
even though they don't actually handle that codec. Copying specific
lists in each codec fixes that.
Signed-off-by: Martin Storsjö <martin@martin.st>
The decoder assumes a single bit depth for all the planes
while the specification allows different bit depths for luma
and chroma.
Avoid the possible problems described in CVE-2013-2277
CC: libav-stable@libav.org
The code is located in mpegvideo, and it's likely that in a minimal
config, we don't want to include debug info anyway.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '668e16a0dd1ff56d4beeff5c658d8a2a08dbfac8':
h264: on reference overflow, reset the reference count to 0, not 1.
Conflicts:
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e671d3ad6cd7fe1d02e9b35b889a25d8c059fce9':
h264: do not copy ref count/ref2frm when updating per-frame context
flvdec: Check the return value of a malloc
Conflicts:
libavformat/flvdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is a regression introduced from the h264/mpegvideo split
Fixes out of array reads
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Instead, only extend edges on-demand when the motion vector actually
crosses the visible decoded area using ff_emulated_edge_mc(). This
changes decoding time for cathedral from 8.722sec to 8.706sec, i.e.
0.2% faster overall. More generally (VP8 uses this also), low-motion
content gets significant speed improvements, whereas high-motion content
tends to decode in approximately the same time.
Signed-off-by: Martin Storsjö <martin@martin.st>
These functions are mostly H264-specific (the only other user I can
spot is bink), and this allows us to special-case some functionality
for H264. Also remove the 16-bit-coeff with >8bpp versions (unused)
and merge the duplicate 32-bit-coeff for >8bpp (identical).
Signed-off-by: Martin Storsjö <martin@martin.st>
The non-intra-pcm branch in hl_decode_mb (simple, 8bpp) goes from 700
to 672 cycles, and the complete loop of decode_mb_cabac and hl_decode_mb
(in the decode_slice loop) goes from 1759 to 1733 cycles on the clip
tested (cathedral), i.e. almost 30 cycles per mb faster.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Not all hwaccels implement all codecs, so using one single list for
multiple such codecs means some codecs will be represented in the list,
even though they don't actually handle that codec. Copying specific
lists in each codec fixes that.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Instead, only extend edges on-demand when the motion vector actually
crosses the visible decoded area using ff_emulated_edge_mc(). This
changes decoding time for cathedral from 8.722sec to 8.706sec, i.e.
0.2% faster overall. More generally (VP8 uses this also), low-motion
content gets significant speed improvements, whereas high-motion content
tends to decode in approximately the same time.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Instead, keep them in the bitstream buffer until we read them verbatim,
this saves a memcpy() and a subsequent clearing of the target buffer.
decode_cabac+decode_mb for a sample file (CAPM3_Sony_D.jsv) goes from
6121.4 to 6095.5 cycles, i.e. 26 cycles faster.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Some applications do not like that.
Fixes VDA
Reduces noise for VDPAU
Tested-by: Guillaume POIRIER <poirierg@gmail.com>
Tested-by: Carl Eugen Hoyos <cehoyos@ag.or.at>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Writing into uninitialized hw surfaces is not supported and triggers an assert inside avpriv_color_frame
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Most of the changes are just trivial are just trivial replacements of
fields from MpegEncContext with equivalent fields in H264Context.
Everything in h264* other than h264.c are those trivial changes.
The nontrivial parts are:
1) extracting a simplified version of the frame management code from
mpegvideo.c. We don't need last/next_picture anymore, since h264 uses
its own more complex system already and those were set only to appease
the mpegvideo parts.
2) some tables that need to be allocated/freed in appropriate places.
3) hwaccels -- mostly trivial replacements.
for dxva, the draw_horiz_band() call is moved from
ff_dxva2_common_end_frame() to per-codec end_frame() callbacks,
because it's now different for h264 and MpegEncContext-based
decoders.
4) svq3 -- it does not use h264 complex reference system, so I just
added some very simplistic frame management instead and dropped the
use of ff_h264_frame_start(). Because of this I also had to move some
initialization code to svq3.
Additional fixes for chroma format and bit depth changes by
Janne Grunau <janne-libav@jannau.net>
Signed-off-by: Anton Khirnov <anton@khirnov.net>