The old avcodec_find_best_pix_fmt() was insufficient due to 64 pix_fmt limit.
In ffmpeg this problem has been solved long ago through avcodec_find_best_pix_fmt2()
Today libav has added a incompatible modified version of avcodec_find_best_pix_fmt2()
under the same name, thus again breaking ABI/API ...
The avcodec_find_best_pix_fmt_of_list() added in this commit here makes the libav
API available to ffmpeg users too.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The number of pixel formats outgrew the number of available bits in
the bitmask used in avcodec_find_best_pix_fmt().
avcodec_find_best_pix_fmt2() uses a PIX_FMT_NONE terminated list
of pixel formats instead.
Move the lavc/imgconvert functions and rename them as follows:
avpicture_get_size -> av_image_get_buffer_size()
avpicture_fill -> av_image_fill_arrays()
avpicture_layout -> av_image_copy_to_buffer()
The new functions have an align parameter, which allows to define the
linesize alignment assumed in the buffer (which is set or read).
The names of the functions are consistent with the lavu/samples API
(av_samples_get_buffer_size(), av_samples_fill_arrays()).
The documentation states that av_image_check_size() will return a
negative value in case of error, while the check is done on ret != 0.
Also return a proper error code rather than -1 in case the check fails.
* qatar/master:
pixdesc: mark pseudopaletted formats with a special flag.
avconv: switch to avcodec_encode_video2().
libx264: implement encode2().
libx264: split extradata writing out of encode_nals().
lavc: add avcodec_encode_video2() that encodes from an AVFrame -> AVPacket
cmdutils: update copyright year to 2012.
swscale: sign-extend integer function argument to qword on x86-64.
x86inc: support yasm -f win64 flag also.
h264: manually save/restore XMM registers for functions using INIT_MMX.
x86inc: allow manual use of WIN64_SPILL_XMM.
aacdec: Use correct speaker order for 7.1.
aacdec: Remove incorrect comment.
aacdec: Simplify output configuration.
Remove Sun medialib glue code.
dsputil: set STRIDE_ALIGN to 16 for x86 also.
pngdsp: swap argument inversion.
Conflicts:
cmdutils.c
configure
doc/APIchanges
ffmpeg.c
libavcodec/aacdec.c
libavcodec/dsputil.h
libavcodec/libx264.c
libavcodec/mlib/dsputil_mlib.c
libavcodec/utils.c
libavfilter/vf_scale.c
libavutil/avutil.h
libswscale/mlib/yuv2rgb_mlib.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
aacenc: Fix LONG_START windowing.
aacenc: Fix a bug where deinterleaved samples were stored in the wrong place.
avplay: use the correct array size for stride.
lavc: extend doxy for avcodec_alloc_context3().
APIchanges: mention avcodec_alloc_context()/2/3
avcodec_align_dimensions2: set only 4 linesizes, not AV_NUM_DATA_POINTERS.
aacsbr: ARM NEON optimised sbrdsp functions
aacsbr: align some arrays
aacsbr: move some simdable loops to function pointers
cosmetics: Remove extra newlines at EOF
Conflicts:
libavcodec/utils.c
libavfilter/formats.c
libavutil/mem.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
mpegenc: use avctx->slices as number of slices
v410enc: fix undefined signed left shift caused by integer promotion
Release notes: mention cleaned up header includes
fix Changelog file
Fix a bunch of typos.
Drop some pointless void* return value casts from av_malloc() invocations.
wavpack: fix typos in previous cosmetic clean-up commit
wavpack: cosmetics: K&R pretty-printing
avconv: remove the 'codec framerate is different from stream' warning
wavpack: determine sample_fmt before requesting a buffer
bmv audio: implement new audio decoding API
mpegaudiodec: skip all channels when skipping granules
mpegenc: simplify muxrate calculation
Conflicts:
Changelog
avconv.c
doc/RELEASE_NOTES
libavcodec/h264.c
libavcodec/mpeg12.c
libavcodec/mpegaudiodec.c
libavcodec/mpegvideo.c
libavformat/mpegenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (47 commits)
lavc: hide private symbols.
lavc: deprecate img_get_alpha_info().
lavc: use avpriv_ prefix for ff_toupper4.
lavc: use avpriv_ prefix for ff_copy_bits and align_put_bits.
lavc: use avpriv_ prefix for ff_ac3_parse_header.
lavc: use avpriv_ prefix for ff_frame_rate_tab.
lavc: rename ff_find_start_code to avpriv_mpv_find_start_code
lavc: use avpriv_ prefix for ff_split_xiph_headers.
lavc: use avpriv_ prefix for ff_dirac_parse_sequence_header.
lavc: use avpriv_ prefix for some dv symbols used in lavf.
lavc: use avpriv_ prefix for some flac symbols used in lavf.
lavc: use avpriv_ prefix for some mpeg4audio symbols used in lavf.
lavc: use avpriv_ prefix for some mpegaudio symbols used in lavf.
lavc: use avpriv_ prefix for ff_aac_parse_header().
lavf: hide private symbols.
lavf: use avpriv_ prefix for some dv functions.
lavf: use avpriv_ prefix for ff_new_chapter().
avcodec: add CODEC_CAP_DELAY note to avcodec_decode_audio3() documentation
avcodec: clarify the CODEC_CAP_DELAY note in avcodec_decode_video2()
avcodec: clarify documentation of CODEC_CAP_DELAY
...
Conflicts:
configure
doc/general.texi
libavcodec/Makefile
libavcodec/aacdec.c
libavcodec/allcodecs.c
libavcodec/avcodec.h
libavcodec/dv.c
libavcodec/dvdata.c
libavcodec/dvdata.h
libavcodec/libspeexenc.c
libavcodec/mpegvideo.c
libavcodec/version.h
libavformat/avidec.c
libavformat/dv.c
libavformat/dv.h
libavformat/flvenc.c
libavformat/mov.c
libavformat/mp3enc.c
libavformat/oggparsespeex.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
It's never been touched or used in any way since it was added in 2003
and only works for PIX_FMT_PAL8, which makes me conclude that nobody's
ever used it.
avpicture_get_size() returns the size of buffer required for avpicture_layout.
For pseudo-paletted formats (gray8...) this size does not include the palette.
However, avpicture_layout doesn't know this and still writes the palette. Consequently,
avpicture_layout writes passed the length of the buffer. This fixes it
by fixing avpicture_layout so that it doesn't write the palette for these formats.
Signed-off-by: Matthew Einhorn <moiein2000@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Similar to avcodec_find_best_pix_fmt(), but instead only compares two destination
pix fmts and selects one of these fmts as the best dest format when converting from
a given source format. Also, as opposed to avcodec_find_best_pix_fmt() which supports
only the first 64 defined pixel formats, this supports as input any of the defined
pixel formats.
Also replaces the old function to rely on the new function.
Signed-off-by: Matthew Einhorn <moiein2000@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixed the problem where if there's more than 64 pixel formats
defined avcodec_find_best_pix_fmt() returns the wrong pixel format.
Signed-off-by: Matthew Einhorn <moiein2000@gmail.com>
Signed-off-by: Stefano Sabatini <stefano.sabatini-lala@poste.it>
Avoid the use of the brittle/inconsistent information in
PixFmtInfo.depth, and implement a possibly more robust logic which
exposes the information in pixdesc.
Also allow the removal of PixFmtInfo.depth, since this is the only use
of it.
The field is only used for checking if a format is YUV planar
and if the format is paletted.
This patch replaces the current is_planar_yuv() code with a function
which uses the pixdesc information. The new implementation is less
efficient, but this should not be an issue as the functions which use
it (av_picture_crop/pad()) are deprecated and currently never used in
the codebase.
Prefer data-driven over procedural logic in avg_bits_per_pixel(),
simplify and improve robustness, as it is easy to miss a function
update when a new format is added.
* qatar/master:
dnxhddec: optimise dnxhd_decode_dct_block()
rtp: remove disabled code
eac3enc: use different numbers of blocks per frame to allow higher bitrates
dnxhd: add regression test for 10-bit
dnxhd: 10-bit support
dsputil: update per-arch init funcs for non-h264 high bit depth
dsputil: template get_pixels() for different bit depths
dsputil: create 16/32-bit dctcoef versions of some functions
jfdctint: add 10-bit version
mov: add clcp type track as Subtitle stream.
mpeg4: add Mpeg4 Profiles names.
mpeg4: decode Level Profile for MPEG4 Part 2.
ffprobe: display bitstream level.
imgconvert: remove unused glue and xglue macros
Conflicts:
libavcodec/dsputil_template.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (37 commits)
In avcodec_open(), set return code to an error value only when an error occurs instead of unconditionally at the start of the function.
lavc: remove reference to opt.h from Makefile.
prefer avio_check() over url_exist()
avio: remove AVIO_* access symbols in favor of new AVIO_FLAG_* symbols
lavu: remove misc disabled cruft
lavu: remove FF_API_OLD_IMAGE_NAMES cruft
NOT PULLED lavu: remove FF_API_OLD_EVAL_NAMES cruft
lavc: remove misc disabled cruft.
lavc: remove the FF_API_INOFFICIAL cruft.
lavc: remove the FF_API_SET_STRING_OLD cruft.
lavc: remove the FF_API_USE_LPC cruft.
lavc: remove the FF_API_SUBTITLE_OLD cruft.
lavc: remove the FF_API_VIDEO_OLD cruft.
lavc: remove the FF_API_AUDIO_OLD cruft.
lavc: remove the FF_API_OPT_SHOW cruft.
lavc: remove the FF_API_MM_FLAGS cruft.
lavf: remove misc disabled cruft.
lavf: remove FF_API_INDEX_BUILT cruft
lavf: remove FF_API_URL_CLASS cruft.
lavf: remove FF_API_SYMVER cruft
...
Merged-by: Michael Niedermayer <michaelni@gmx.at>
