This makes sure errors in setting stream parameters are passed
on to the caller. This avoids successfully opening files while
some parameters aren't filled in properly.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Fixes sync in some samples (e.g. bugs 7581 and 8374 in VLC).
Based on a commit by Matthieu Bouron <matthieu.bouron@gmail.com>
Reported-by: Jean-Baptiste Kempf <jb@videolan.org>
CC: libav-stable@libav.org
This avoids setting a negative number of frames, ending up with a
negative average frame rate.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
If a zero-length video packet is to be returned, just return
AVERROR(EAGAIN) and switch back to the audio stream.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids a division by zero for G726.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids a division by zero.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Even if the sample rate is valid, an invalid bitrate could
pass the mode combination test below.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids divisions by zero later (and possibly assertions in
time base scaling), since an invalid rate_flag combined with an
invalid bitrate below could pass the mode combination test.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
When av_reallocp fails, the associated variables that keep track of
the number of elements in the array (and in some cases, the
separate number of allocated elements) need to be reset.
Not all of these might technically be needed, but it's better to
reset them if in doubt, to make sure variables don't end up
conflicting.
Signed-off-by: Martin Storsjö <martin@martin.st>
Also add options for specifying a certificate and key, which can
be used both when operating as client and as server.
Partially based on a patch by Peter Ross.
Signed-off-by: Martin Storsjö <martin@martin.st>
When passing a dict to the nested protocol, it will consume
the used options from it, so a separate copy needs to be used
when reopening the connection multiple times.
Signed-off-by: Martin Storsjö <martin@martin.st>
A file containing the trusted CA certificates needs to be
supplied via the ca_file AVOption, unless the TLS library
has got a system default file/database set up.
This doesn't check the hostname of the peer certificate with
openssl, which requires a non-trivial piece of code for
manually matching the desired hostname to the string provided
by the certificate, not provided as a library function.
That is, with openssl, this only validates that the received
certificate is signed with the right CA, but not that it is
the actual server we think we're talking to.
Verification is still disabled by default since we can't count
on a proper CA database existing at all times.
Signed-off-by: Martin Storsjö <martin@martin.st>
Fragmenting blindly to a certain duration isn't a good choice
if one should be able to switch between different qualities,
therefore default to keyframes instead.
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes sure other sanity checks for conflicting options
can work properly, e.g. for the conflict between the faststart
flag when using the ismv mode.
Signed-off-by: Martin Storsjö <martin@martin.st>
Use update_offset() as done for rtmp audio, video and notifications and
read update and write the fields instead of replacing them in the rtmp
packet and then memcpying it to the output buffer.
And fix the AMF_DATA_TYPE_ARRAY parsing while at it.
A MIXEDARRAY type, as the ARRAY, store the number of elements in
an uint32 before the list. The ARRAY is strict and does not have
an OBJECT terminator, MIXEDARRAY behaves like an OBJECT type and
a different than stated number of element can be present.
Also make sure the existing length check can't overflow.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes sure that it doesn't try to free an AVBuffer belonging
to an earlier packet when we free the local packet at the end.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids divisions by zero later.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Null buffers are useful for simulating writing to a real buffer
for the sake of measuring how many bytes are written.
Signed-off-by: Martin Storsjö <martin@martin.st>
ASF markers only have a start time, so we lose the chapter end times,
but that is ASF for you
Signed-off-by: Vladimir Pantelic <vladoman@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
this was forgotten when we changed ASF to not output the preroll time
Signed-off-by: Vladimir Pantelic <vladoman@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Abort if it is invalid if strict error checking has been requested.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes the output fragments independent of their position in
the output stream, making the output work better when streamed.
QuickTime Player doesn't support fragmented mp4 without the base
data offset, though.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is a bit more work, but avoids having to fill in
the data offset field afterwards instead of directly when
the rest of the trun atom is written.
This simplifies future cases where this field needs to be set to
something different.
Signed-off-by: Martin Storsjö <martin@martin.st>
A given packet won't always come in contiguously; sometimes
they may be broken up on chunk boundaries by packets of another
channel.
This support primarily involves tracking information about the
data that's been read, so the reader can pick up where it left
off for a given channel.
As a side effect, we no longer over-report the bytes read if
(toread = MIN(size, chunk_size)) == size
Signed-off-by: Martin Storsjö <martin@martin.st>
Since the number of channels is multiplied by 36 and assigned to
to a uint16_t, make sure this calculation didn't overflow. (In
certain cases the calculation could overflow leaving the
truncated block_align at 0, leading to divisions by zero later.)
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Some files have the duration set to -1 in the mdhd atom, more
or less legitimately. (We produce such files ourselves, for the
initial duration in fragmented mp4 files.)
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This more closely corresponds to the usage of the field.
Its usage here is unrelated to the channel ID.
Signed-off-by: Martin Storsjö <martin@martin.st>
Channel 4 is typically used by the Flash player to transmit
audio, channel 6 for video, and various stream-specific invokes
get sent over channel 8, which is designated the source channel.
This more closely matches the behavior of the Flash player,
including the transmission of play requests over channel 8.
Signed-off-by: Martin Storsjö <martin@martin.st>
Sending non-monotonic packets (e.g. when the audio and video
streams are monotonic within themselves but not muxed
monotonically) will lead to negative values the RTMP timestamp
field (where timestamps are transmitted only as deltas for each
channel), and this delta can end up being incorrectly written as
a large unsigned number.
Signed-off-by: Martin Storsjö <martin@martin.st>
Since 596e5d4783, this is not necessary anymore. It also allows to
actually disable the flushing, improving write performance (but
possibly giving worse latency in real-time streaming).
Signed-off-by: Martin Storsjö <martin@martin.st>
This is enabled by default and can be disabled with
"-fflags -flush_packets".
Inspired by a patch from Nicolas George <nicolas.george@normalesup.org>.
Signed-off-by: Martin Storsjö <martin@martin.st>
If we really want to support parameter changes, they need to be
signalled along with the AVPackets as parameter change side data,
not just changing the AVCodecContext parameters when a packet
is demuxed (since there may be other earlier packets yet undecoded).
Something similar was already done for the sample rate in 0883109b2,
but some parameters were left changeable.
This avoids having to recheck the channel count for validity for
each decoded frame in (ad)pcm decoders, unless the decoders
explicitly say that they accept parameter changes.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Limit the size to INT_MAX/2 (for simplicity) to be sure that
size + BYTES_PER_FRAME_RECORD won't overflow.
Also factorize other existing error return paths.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Limit the size to INT_MAX/2 (for simplicity) to be sure that
size + FF_INPUT_BUFFER_PADDING_SIZE won't overflow.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
The seektable is required for filling in ape->frames[i].pos
further down.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes sure the faststart vs fragmentation check works as
intended when fragmentation is enabled due to using the ismv mode.
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes warnings about making integers from pointers without
a cast, and avoids the theoretical case where the lower 32 bits of
the pointer would all be zero where the implicit cast wouldn't give
the right result.
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows creation of frame accurate chapter marks from sources like
DVD and BD where the precise chapter location is not known until the
chapter mark has been reached during reading.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This should improve write performance quite significantly.
---
Tested with both writing a normal mp4, by using the faststart
feature and writing a fragmented mp4 file; all turn out with the
same md5sum as before.
Signed-off-by: Martin Storsjö <martin@martin.st>
Remove the header decoding for PCM audio from mpeg.c and the
20/24bit parts from pcm.c and merge them into a new decoder in
pcm-dvd.c.
The decoder has added support for samples that span multiple
packets and modified 20/24bit group decoding. Both is needed to
decode samples that have been generated with DVD-Lab Pro 2. The
decoding of 16bit PCM and two channel 24bit is identical to
before. No other samples are known to verify the correctness of
the encoding this software does.
The complete list of tested formats is
48kHz/16bit/2-8 channels
48kHz/24bit/2-5 channels
96kHz/16bit/2-4 channels
96kHz/24bit/2 channels
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
When streaming to limelight, the app name is either a full
"appname/subaccount" or "appname/_definst_". In the latter case,
the app name can be simplified into simply "appname", but the
authentication hashing assumes the /_definst_ still to be present.
Signed-off-by: Martin Storsjö <martin@martin.st>
If a client tries to read the file while it's being updated, the client
would get an incomplete manifest. Instead write to a separate temp file
and atomically rename it to replace the previous one.
Signed-off-by: Martin Storsjö <martin@martin.st>
The element was only being written when the value == 1. But the default
value of this element is 1, so this has no useful effect. This element
needs to be written when the value == 0.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
On failures in the write_trailer function, we could also ignore
the errors and try to finish the file despite these errors (which
would only leave an incomplete chapters track). It's probably better
to signal the error clearly to the caller though (and if this
function failed there's no guarantee that there's enough memory to
finish the trailer either).
Signed-off-by: Martin Storsjö <martin@martin.st>
QuickTime will play multiple audio tracks concurrently if this flag is
set for multiple audio tracks. And if no subtitle track has this flag
set, QuickTime will show no subtitles in the subtitle menu.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Faststart moves the moov atom to the beginning of the file and rewrites
the rest of the file after muxing is complete.
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows creation of frame accurate chapter marks from sources
like DVD and BD where the precise chapter location is not known until
the chapter mark has been reached during reading.
Signed-off-by: Martin Storsjö <martin@martin.st>
Allow emitting the current cluster that is being written before
starting a new one, simplifying how to figure out where clusters
are positioned in the output stream (for live streaming).
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Seeking in certain broken files would cause ogg_read_timestamp
to fail because ogg_packet would go into a state where all packets
of stream 1 would be discarded until the end of the stream.
Bug-Id: 553
CC: libav-stable@libav.org
Signed-off-by: Jan Gerber <j@v2v.cc>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The mov/mp4 muxer has support for handling negative timestamps
via edit lists (which customarily is used for handling the 1-frame
delay due to B-frames as well).
Using the muxer's native way of handling it is better than using
the generic offsetting. The generic offsetting is a bit too
crude when e.g. the timebase of one track is 1/fps, where the
edit lists can handle it accurately.
Signed-off-by: Martin Storsjö <martin@martin.st>
The counter itself shouldn't be wrapped, since it is used for
determining end_pts for the next segment - only wrap the number
used for the segment file name.
Signed-off-by: Martin Storsjö <martin@martin.st>
The hls muxer itself doesn't have any direct (object file level)
dependencies on mpegtsenc.o, and including that object file
directly doesn't ensure that it is registered so that the muxer
actually is accessible.
Signed-off-by: Martin Storsjö <martin@martin.st>
IPPROTO_IPV6 is unrelated here (it's only used in udp.c for
multicast sockopts), check for support for the sockaddr_in6
struct itself.
Signed-off-by: Martin Storsjö <martin@martin.st>
