* qatar/master: (26 commits)
adxenc: use AVCodec.encode2()
adxenc: Use the AVFrame in ADXContext for coded_frame
indeo4: fix out-of-bounds function call.
configure: Restructure help output.
configure: Internal-only components should not be command-line selectable.
vorbisenc: use AVCodec.encode2()
libvorbis: use AVCodec.encode2()
libopencore-amrnbenc: use AVCodec.encode2()
ra144enc: use AVCodec.encode2()
nellymoserenc: use AVCodec.encode2()
roqaudioenc: use AVCodec.encode2()
libspeex: use AVCodec.encode2()
libvo_amrwbenc: use AVCodec.encode2()
libvo_aacenc: use AVCodec.encode2()
wmaenc: use AVCodec.encode2()
mpegaudioenc: use AVCodec.encode2()
libmp3lame: use AVCodec.encode2()
libgsmenc: use AVCodec.encode2()
libfaac: use AVCodec.encode2()
g726enc: use AVCodec.encode2()
...
Conflicts:
configure
libavcodec/Makefile
libavcodec/ac3enc.c
libavcodec/adxenc.c
libavcodec/libgsm.c
libavcodec/libvorbis.c
libavcodec/vorbisenc.c
libavcodec/wmaenc.c
tests/ref/acodec/g722
tests/ref/lavf/asf
tests/ref/lavf/ffm
tests/ref/lavf/mkv
tests/ref/lavf/mpg
tests/ref/lavf/rm
tests/ref/lavf/ts
tests/ref/seek/lavf_asf
tests/ref/seek/lavf_ffm
tests/ref/seek/lavf_mkv
tests/ref/seek/lavf_mpg
tests/ref/seek/lavf_rm
tests/ref/seek/lavf_ts
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (58 commits)
amrnbdec: check frame size before decoding.
cscd: use negative error values to indicate decode_init() failures.
h264: prevent overreads in intra PCM decoding.
FATE: do not decode audio in the nuv test.
dxa: set audio stream time base using the sample rate
psx-str: do not allow seeking by bytes
asfdec: Do not set AVCodecContext.frame_size
vqf: set packet parameters after av_new_packet()
mpegaudiodec: use DSPUtil.butterflies_float().
FATE: add mp3 test for sample that exhibited false overreads
fate: add cdxl test for bit line plane arrangement
vmnc: return error on decode_init() failure.
libvorbis: add/update error messages
libvorbis: use AVFifoBuffer for output packet buffer
libvorbis: remove unneeded e_o_s check
libvorbis: check return values for functions that can return errors
libvorbis: use float input instead of s16
libvorbis: do not flush libvorbis analysis if dsp state was not initialized
libvorbis: use VBR by default, with default quality of 3
libvorbis: fix use of minrate/maxrate AVOptions
...
Conflicts:
Changelog
doc/APIchanges
libavcodec/avcodec.h
libavcodec/dpxenc.c
libavcodec/libvorbis.c
libavcodec/vmnc.c
libavformat/asfdec.c
libavformat/id3v2enc.c
libavformat/internal.h
libavformat/mp3enc.c
libavformat/utils.c
libavformat/version.h
libswscale/utils.c
tests/fate/video.mak
tests/ref/fate/nuv
tests/ref/fate/prores-alpha
tests/ref/lavf/ffm
tests/ref/vsynth1/prores
tests/ref/vsynth2/prores
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
rtpdec: Use 4 byte startcodes for H.264
matroskadec: Mark variable as av_unused.
Move some conditionally used variables into the block where they are used.
Drop some completely unnecessary av_unused attributes.
swscale: Remove unused variable alpMmxFilter.
Drop unnecessary av_uninit attributes from some variable declarations.
movenc: Support muxing wmapro in ismv/isma
mpegtsenc: Add an AVOption for forcing a new PAT/PMT/SDT to be written
swscale: move YUV2PACKED16WRAPPER() macro down to where it is used.
swscale: handle gray16 as a "planar" YUV format (Y-only, of course).
swscale: use yuv2packed1() functions for unscaled chroma also.
swscale: fix incorrect chroma bias in yuv2rgb48_1_c().
swscale: fix invalid memory accesses in yuvpacked1() functions.
Move PS2 MMI code below the mips subdirectory, where it belongs.
mips: Move MMI function declarations to a header.
build: Set correct dependencies for rtmp* protocols implemented by librtmp.
Conflicts:
libavcodec/ac3enc_template.c
libavformat/mpegtsenc.c
libswscale/output.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
It makes more sense for a bit mask to use an unsigned type.
The change should be source and binary compatible on all
supported systems, hence micro version bump.
Fixes a few invalid shifts.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master: (44 commits)
replacement Indeo 3 decoder
gsm demuxer: do not allocate packet twice.
flvenc: use first packet delay as global delay.
ac3enc: doxygen update.
imc: return error codes instead of 0 for error conditions.
imc: return meaningful error codes instead of -1
imc: do not set channel layout for stereo
imc: validate channel count
imc: check for ff_fft_init() failure
imc: check output buffer size before decoding
imc: use DSPContext.bswap16_buf() to byte-swap packet data
rtsp: add allowed_media_types option
libgsm: add flush function to reset the decoder state when seeking
libgsm: simplify decoding by using a loop
gsm: log error message when packet is too small
libgsmdec: do not needlessly set *data_size to 0
gsmdec: do not needlessly set *data_size to 0
gsmdec: add flush function to reset the decoder state when seeking
libgsmdec: check output buffer size before decoding
gsmdec: log error message when output buffer is too small.
...
Conflicts:
Changelog
ffplay.c
libavcodec/indeo3.c
libavcodec/mjpeg_parser.c
libavcodec/vp3.c
libavformat/cutils.c
libavformat/id3v2.c
libavutil/parseutils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Add some parameters to existing function documentation.
Remove some unneeded documentation.
Convert some static function documentation to non-doxygen style.
* qatar/master:
ac3enc: Add channel coupling support for the fixed-point AC-3 encoder.
ac3enc: scale floating-point coupling channel coefficients in scale_coefficients() rather than in apply_channel_coupling()
ac3enc: fix encoding of stereo ac3 files when rematrixing is disabled.
wavpack: fix wrong return value in wavpack_decode_block()
avconv: fix parsing metadata specifiers.
fate: use +frame+slice named constants instead of '3'
mpeg12: propagate more real return values through chunk decode error return and fix some indentation
wavpack: use context reset in appropriate places
avconv: move mux_preload and mux_max_delay to options context
avconv: move bitstream filters to options context.
avconv: move rate_emu to options context.
avconv: move max_frames to options context.
avconv: move metadata to options context.
avconv: move ts scale to options context.
avconv: move chapter maps to options context.
avconv: move metadata maps to options context.
avconv: move codec_names to options context.
Conflicts:
avconv.c
tests/fate-run.sh
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
ac3enc: add macros for option names to make them more understandable.
ac3enc: fix 'channel_coupling' option to actually allow 'auto'.
cavs: fix some crashes with invalid bitstreams
ac3enc: clip coupling coordinates during calculation
Remove incorrect info in documentation of AVCodecContext.bits_per_raw_sample.
lavc: fix parentheses placement in avcodec_open2().
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
lavc: make avcodec_init() static on next bump.
ac3enc: remove unneeded #include
ac3enc: restructure coupling coordinate reuse calculation
ac3enc: allow new coupling coordinates to be sent independently for each channel.
ac3enc: separate exponent bit counting from exponent grouping.
h264: propagate error return values for AV_LOG_ERROR-triggering events
aac: Don't attempt to output configure an invalid channel configuration.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Move bit counting to the bit allocation function. Move exponent grouping to
after bit allocation. This will allow for adjustment of bandwidth parameters
during bit allocation without having to do exponent grouping multiple times.
* qatar/master:
ppc: remove redundant setting of Altivec IDCT
mpegvideo: initialise DSPContext in ff_dct_common_init()
cosmetics: reindent
eac3enc: support writing of basic mixing and info metadata
dnxhdenc: fix declarations in for loops
dsputil: remove stale bink prototypes and comments
dsputil: move a bink-only function to binkdsp
dsputil: remove some unused functions
bink: make IDCT take 32-bit input
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
dnxhddec: optimise dnxhd_decode_dct_block()
rtp: remove disabled code
eac3enc: use different numbers of blocks per frame to allow higher bitrates
dnxhd: add regression test for 10-bit
dnxhd: 10-bit support
dsputil: update per-arch init funcs for non-h264 high bit depth
dsputil: template get_pixels() for different bit depths
dsputil: create 16/32-bit dctcoef versions of some functions
jfdctint: add 10-bit version
mov: add clcp type track as Subtitle stream.
mpeg4: add Mpeg4 Profiles names.
mpeg4: decode Level Profile for MPEG4 Part 2.
ffprobe: display bitstream level.
imgconvert: remove unused glue and xglue macros
Conflicts:
libavcodec/dsputil_template.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
Remove h264_lowres_idct_put/add functions
Remove snow/dwt test program
h264: remove some disabled code
Fix incorrect max_lowres values
matroskadec: fix integer underflow if header length < probe length.
cosmetics: indentation
eac3enc: use frame exponent strategy when applicable.
cosmetics: rename eac3dec_data.c/h to eac3_data.c/h since the tables will also be used in the E-AC-3 encoder.
dsputil: fix ff_check_alignment()
Conflicts:
libavcodec/Makefile
libavcodec/h264idct_template.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This checks if the set of selected exponent strategies for all blocks in a
channel are in the frame exponent strategy table, and if so, writes the
table index instead of each strategy. This saves up to 7 bits per channel per
frame, so the overall effect on quality is small.
* commit 'b5849f77095439e994b11c25e6063d443b36c228': (21 commits)
ac3enc: merge AC3MDCTContext with AC3EncodeContext.
ac3enc: prefer passing AC3EncodeContext rather than AVCodecContext
ac3enc: fix memleak
mpeg1video: add CODEC_CAP_SLICE_THREADS.
lavf: fix segfault in av_open_input_stream()
mpegtsenc: set Random Access indicator on keyframe start packets
lavf: Cleanup try_decode_frame() logic.
Replace some gotos that lead to single return statements by direct return.
build: move tests/seek_test.c to libavformat and reuse generic build rules
mxfenc: include needed header for ff_iso8601_to_unix_time() prototype
Add a check for strptime().
lavf: factor out conversion of ISO8601 string to unix time
wav: parse 'bext' metadata
wav: keep parsing until EOF if the input is seekable and we know the size of the data tag
wav: Refactor the tag checking into a switch statement
wav: make sure neither data_size nor sample_count is negative.
wav: refactor the 'fmt ' tag search and parsing.
wav: add an option for writing BEXT chunk
ffmpeg: get rid of a pointless limit on number of streams.
ffmpeg: remove an unused define.
...
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Since both the fixed-point and floating-point encoders use the FFTContext,
this no longer needs to be in a separate context. Also, when a short-transform
context is added, the same MDCT window will be used.
* qatar/master: (21 commits)
swscale: Add Doxygen for hyscale_fast/hScale.
fate: enable lavfi-pixmt tests on big endian systems
PPC: swscale: disable altivec functions for unsupported formats
fate: merge identical pixdesc_be/le tests
swscale: Add Doxygen for yuv2planar*/yuv2packed* functions.
build: call texi2pod.pl with full path instead of symlink
build: include sub-makefiles using full path instead of symlinks
swscale: update big endian reference values after dff5a835.
wavpack: skip blocks with no samples
cosmetics: remove outdated comment that is no longer true
build: replace some addprefix/addsuffix with substitution refs
avutil: Remove unused arbitrary precision integer code.
configure: Drop check for availability of ten assembler operands.
aacenc: Save channel configuration for later use.
aacenc: Fix codebook trellising for zeroed bands.
swscale: change prototypes of scaled YUV output functions.
swscale: re-add support for non-native endianness.
swscale: disentangle yuv2rgbX_c_full() into small functions.
swscale: split yuv2packed[12X]_c() remainders into small functions.
swscale: split yuv2packedX_altivec in smaller functions.
...
Conflicts:
Makefile
configure
libavcodec/x86/dsputil_mmx.c
libavfilter/Makefile
libavformat/Makefile
libavutil/integer.c
libavutil/integer.h
libswscale/swscale.c
libswscale/swscale_internal.h
libswscale/x86/swscale_template.c
tests/ref/lavfi/pixdesc_le
tests/ref/lavfi/pixfmts_scale
Merged-by: Michael Niedermayer <michaelni@gmx.at>
They introduce too much complexity for very little benefit. The result is that
encoding will be more likely to fail at extremely low bitrates where quality
would be awful anyway.
* qatar/master:
swscale: remove misplaced comment.
ffmpeg: fix streaming to ffserver.
swscale: split out RGB48 output functions from yuv2packed[12X]_c().
build: move vpath directives to main Makefile
swscale: fix JPEG-range YUV scaling artifacts.
build: move ALLFFLIBS to a more logical place
ARM: factor some repetitive code into macros
Fix SVQ3 after adding 4:4:4 H.264 support
H.264: fix CODEC_FLAG_GRAY
4:4:4 H.264 decoding support
ac3enc: fix allocation of floating point samples.
Conflicts:
ffmpeg.c
libavcodec/dsputil_template.c
libavcodec/h264.c
libavcodec/mpegvideo.c
libavcodec/snow.c
libswscale/swscale.c
libswscale/swscale_internal.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (24 commits)
utils: Drop pointless '#if 1' preprocessor directive.
ac3enc: remove empty ac3_float function that is never called
ac3enc: split templated float vs. fixed functions into a separate file.
ac3enc: dynamically allocate AC3EncodeContext fields windowed_samples and mdct
ac3enc: use function pointer to choose between AC-3 and E-AC-3 header output functions.
Roll back 4:4:4 H.264 for now Needs some ARM/PPC asm modifications.
Fix SVQ3 after adding 4:4:4 H.264 support
H.264: fix CODEC_FLAG_GRAY
4:4:4 H.264 decoding support
h264_parser: Fix whitespace after previous change.
h264_parser: Fix behaviour when PARSER_FLAG_COMPLETE_FRAMES is set.
wav: remove an invalid free().
lavf: initialise reference_dts in av_estimate_timings_from_pts.
h264: don't be so picky on decoding pps in extradata.
avcodec.h: add or elaborate on some documentation comments.
h264: change a few comments into error messages
ac3dec: fix doxy-style for comment ("///>" should be "///<" instead).
img2: add .dpx to the list of supported file extensions.
ffv1: fix undefined behavior with insane widths.
ARM: jrevdct_arm: simplify stack usage
...
Merged-by: Michael Niedermayer <michaelni@gmx.at>
