* qatar/master:
http: Check the auth string contents and not only the pointer
Conflicts:
libavformat/http.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Adds support for demuxing SeekPreRoll and CodecDelay container
elements.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This makes sure we don't send the Except: 100-continue header
if no authentication credentials have been provided.
Signed-off-by: Martin Storsjö <martin@martin.st>
Normally, all channel ids are between 0 and 10, while they in
uncommon cases can have values up to 64k.
This avoids allocating two arrays for up to 64k entries (at a total
of over 6 MB in size) each when most of them aren't used at all.
Signed-off-by: Martin Storsjö <martin@martin.st>
It appears this bug originates from a "work in progress" patch from
ffmpeg-devel that was heavily redesigned by and integrated in libav
And that patch even had a reply and review on the mailing list pointing
out that it had a bug.
This fixes a deadlock with ffserver
See: [FFmpeg-devel] [PATCH] Fix HTTP authentication problem for POST actions.
[FFmpeg-devel] [PATCH 1/3] Introduce auth_phase flag, which will be true if authorization needs to be sent, but the type of authorization is not known yet Partial fix#3036
[FFmpeg-devel] [PATCH 2/3] Only add Transfer-Encoding header when not in authorization phase, because server will wait (indefinitely) for data when receiving this header Partial fix#3036
[FFmpeg-devel] [PATCH 3/3] Only allow posting data and/or forcing a 200 code, enabling posting isml chunks, -after- we did a possible first request to get a 403 from the server telling us which type of authentication to apply Final part fix#3036
See: 71549a857b
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '71549a857b13edf4c4f95037de6ed5bb4c4bd4af':
http: Support auth method detection for POST
Conflicts:
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Line comes from ecab1c7741
and was not merged previously
Thanks-to: Nicolas George <george@nsup.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Inspired by a patch by Jakob van Bethlehem. But instead of doing
an empty POST first to trigger the WWW-Authenticate header (which
would succeed if no auth actually was required), add an Expect:
100-continue header, which is meant to be used exactly for
cases like this.
The header is added if doing a post, and the user has specified
authentication but we don't know the auth method yet.
Not all common HTTP servers support the Expect: 100-continue header,
though, so we only try to use it when it really is needed. The user
can request it to be added for other POST requests as well via
an option - which would allow the caller to know immediately that
the POST has failed (e.g. if no auth was provided but the server
required it, or if the target URL simply doesn't exist).
This is only done for write mode posts (e.g. posts without pre-set
post_data) - for posts with pre-set data, we can just redo the post
if it failed due to 401.
Signed-off-by: Martin Storsjö <martin@martin.st>
The default is to autodetect the auth method. This does require one
extra request (and also closing and reopening the http connection).
For some cases such as HTTP POST, the autodetection is not handled
properly (yet).
No option is added for digest, since this method requires getting
nonce parameters from the server first and can't be used straight
away like Basic.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'c18375ec8040a9fe0f186b2033dc975883143758':
oggvorbisdec: add support for embedded cover art
Conflicts:
libavformat/oggparsevorbis.c
See: 193782216f
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ecab1c77410f023b437c6ed3a3281be8f039e574':
oggdec: add support for Opus in Ogg demuxing
Conflicts:
Changelog
libavformat/oggparseopus.c
libavformat/version.h
See: e62fd6619f
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Somehow 2 different identifiers have come into existence which makes supporting
both until the next major version bump required
I did not investigate how exactly that did happen.
wm4, j-b and smarter prefer hevc.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e6ed8668597cfea25dfb350a9b4df7fb2efc1d90':
flvenc: Write proper cropping for VP6 even if there's no extradata
Conflicts:
libavformat/flvenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'be1e1373d267bae2af8a62d79eef736736f24565':
flvenc: Support muxing VP6A as well
Conflicts:
libavformat/flvenc.c
See: 42ae83c196
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '756547ce7f4d67a18663503e2157aebed3531703':
avi: DV in AVI must be considered single stream
Conflicts:
libavformat/avidec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The plain VP6 format is vertically flipped compared to VP6F/VP6A.
Support for the plain VP6 format was added in 09d8c0ae83 (which
also introduced support for muxing VP6F properly in general).
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'b698542ad83284fbb8c22404e3cafeb2dd739d38':
mov: Don't allocate arrays with av_malloc that will be realloced
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '8921e32f730c191543b84e61338bc9d549aa05a3':
rtmpproto: Readjust the end of the flv buffer if handle_metadata exited early
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '24fee95321c1463360ba7042d026dae021854360':
rtmpproto: Move the flv header/trailer addition to append_flv_data
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '4d6d70292e91a7ef027824d731b6b6570ceabf2f':
rtmpproto: Pass the 'live' parameter in the right unit
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a6b361325f2bfc8d9d4e5f761d6c1a07b209c4fb':
rtmpproto: Print the error code string if there's no description
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This wasn't an issue prior to 58404738, when the whole RTMP packet
was copied at once and the length of the individual embedded flv
packets only were validated by the flv demuxer.
Prior to this patch, this could lead to reads and writes out of bound.
Signed-off-by: Martin Storsjö <martin@martin.st>
If the embedded flv packets were incomplete and we aborted the
copying loop early, make sure the flv buffer is trimmed to
only contain full packets.
Signed-off-by: Martin Storsjö <martin@martin.st>
update_offset is also called from handle_metadata, where the
packet header sizes is already included in the size.
Previously this lead to flv_data/flv_size including 15 uninitialized
bytes at the end after each call to handle_metadata, making the
flv demuxer lose sync with the stream.
Also remove leftover copying in handle_metadata. This is a leftover
from the refactoring in 5840473. (Previously this final mempcy was
the one that copied all the packets at once, while this is done
within the loop right now.) After making sure flv_size is set to
the right size, this write was out of bounds.
Signed-off-by: Martin Storsjö <martin@martin.st>
This was overlooked in d872fb0f7 since I assumed all the realloc
issues in the rtmp code was fixed already.
Signed-off-by: Martin Storsjö <martin@martin.st>
The current magic numbers passed are values in seconds, while the
parameter itself should be passed over the wire in milliseconds.
This makes (some/all?) live streams from Red5 work correctly, that
previously returned StreamNotFound even with "-rtmp_live live". After
this commit, the default 'any' also works on these streams.
Signed-off-by: Martin Storsjö <martin@martin.st>
On (certain streams/setups at least on) Red5, the description string
actually is present, but empty. Therefore, first try loading the
description, but if not found or empty, load the code string instead.
The code string is quite understandable in most cases anyway (like
"NetStream.Play.StreamNotFound").
Signed-off-by: Martin Storsjö <martin@martin.st>
Here is an extract of fate-samples/sub/vobsub.idx, with an additional
text at the end of each line to better identify each bitmap:
timestamp: 00:04:55:445, filepos: 00001b000 Ace!
timestamp: 00:05:00:049, filepos: 00001b800 Wake up, honey!
timestamp: 00:05:02:018, filepos: 00001c800 I gotta go to work.
timestamp: 00:05:02:035, filepos: 00001d000 <???>
timestamp: 00:05:04:203, filepos: 00001d800 Look after Clayton, okay?
timestamp: 00:05:05:947, filepos: 00001e800 I'll be back tonight.
timestamp: 00:05:07:957, filepos: 00001f800 Bye! Love you.
timestamp: 00:05:21:295, filepos: 000020800 Hey, Ace! What's up?
timestamp: 00:05:23:356, filepos: 000021800 Hey, how's it going?
timestamp: 00:05:24:640, filepos: 000022800 Remember what today is? The 3rd!
timestamp: 00:05:27:193, filepos: 000023800 Look over there!
timestamp: 00:05:28:369, filepos: 000024800 Where are they going?
timestamp: 00:05:28:361, filepos: 000025000 <???>
timestamp: 00:05:29:946, filepos: 000025800 Let's go see.
timestamp: 00:05:31:230, filepos: 000026000 I can't, man. I got Clayton.
Note the two "<???>": they are basically split subtitles (with the
previous one), which the dvdsub decoder is now supposed to reconstruct
with a previous commit. But also note that while the first chunk has
increasing timestamps,
timestamp: 00:05:02:018, filepos: 00001c800
timestamp: 00:05:02:035, filepos: 00001d000
...it's not the case of the second one (and this is not an exception in the
original file):
timestamp: 00:05:28:369, filepos: 000024800
timestamp: 00:05:28:361, filepos: 000025000
For the dvdsub decoder, they need to be "filepos'ed" ordered, but the
FFDemuxSubtitlesQueue is timestamps ordered, which is the reason of the
introduction of a sub sort method in the context, to allow giving
priority to the position, and then the timestamps. With that change, the
dvdsub decoder get fed with ordered packets.
Now the packet size estimation was also broken: the filepos differences
in the vobsub index defines the full data read between two subtitles
chunks, and it is necessary to take into account what is read by the
mpegps_read_pes_header() function since the length returned by that
function doesn't count the size of the data it reads. This is fixed with
the introduction of total_read, and {old,new}_pos. By doing this change,
we can drop the unreliable len16 heuristic and simplify the whole loop.
Note that mpegps_read_pes_header() often read more than one PES packet
(typically in one call it can read 0x1ba and 0x1be chunk along with the
relevant 0x1bd packet), which triggers the "total_read + pkt_size >
psize" check. This is an expected behaviour, which could be avoided by
having a more chunked version of mpegps_read_pes_header().
The latest change is the extraction of each stream into its own
subtitles queue. If we don't do this, the maximum size for a subtitle
chunk is broken, and the previous changes can not work. Having each
stream in a different queue requires some little adjustments in the
seek code of the demuxer.
This commit is only meaningful as a whole change and can not be easily
split. The FATE test changes because it uses the vobsub demuxer.
previously only codec_ids could be forced, which did not allow
forcing a specific implementation like libopenjpeg vs jpeg2000.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'cc41167aede4c101ad17eeffa8f39bb6c23d3dad':
asfdec: Check the return value of asf_read_stream_properties
Merged-by: Michael Niedermayer <michaelni@gmx.at>
